ath10k: Add BMI param value to execute otp to hw_param

BMI parameter value to execute downloaded otp binary
is different for QCA99X0. Have a member in hw_params
to hold hw specific BMI param.

Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qti.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>

drivers/net/wireless/ath/ath10k/core.c

@@ -49,6 +49,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.patch_load_addr = QCA988X_HW_2_0_PATCH_LOAD_ADDR,
 		.uart_pin = 7,
 		.has_shifted_cc_wraparound = true,
+		.otp_exe_param = 0,
 		.fw = {
 			.dir = QCA988X_HW_2_0_FW_DIR,
 			.fw = QCA988X_HW_2_0_FW_FILE,
@@ -63,6 +64,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.name = "qca6174 hw2.1",
 		.patch_load_addr = QCA6174_HW_2_1_PATCH_LOAD_ADDR,
 		.uart_pin = 6,
+		.otp_exe_param = 0,
 		.fw = {
 			.dir = QCA6174_HW_2_1_FW_DIR,
 			.fw = QCA6174_HW_2_1_FW_FILE,
@@ -77,6 +79,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.name = "qca6174 hw3.0",
 		.patch_load_addr = QCA6174_HW_3_0_PATCH_LOAD_ADDR,
 		.uart_pin = 6,
+		.otp_exe_param = 0,
 		.fw = {
 			.dir = QCA6174_HW_3_0_FW_DIR,
 			.fw = QCA6174_HW_3_0_FW_FILE,
@@ -91,6 +94,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.name = "qca6174 hw3.2",
 		.patch_load_addr = QCA6174_HW_3_0_PATCH_LOAD_ADDR,
 		.uart_pin = 6,
+		.otp_exe_param = 0,
 		.fw = {
 			/* uses same binaries as hw3.0 */
 			.dir = QCA6174_HW_3_0_FW_DIR,
@@ -106,6 +110,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.name = "qca99x0 hw2.0",
 		.patch_load_addr = QCA99X0_HW_2_0_PATCH_LOAD_ADDR,
 		.uart_pin = 7,
+		.otp_exe_param = 0x00000700,
 		.fw = {
 			.dir = QCA99X0_HW_2_0_FW_DIR,
 			.fw = QCA99X0_HW_2_0_FW_FILE,
@@ -413,6 +418,7 @@ out:
 static int ath10k_download_and_run_otp(struct ath10k *ar)
 {
 	u32 result, address = ar->hw_params.patch_load_addr;
+	u32 bmi_otp_exe_param = ar->hw_params.otp_exe_param;
 	int ret;
 
 	ret = ath10k_download_board_data(ar, ar->board_data, ar->board_len);
@@ -438,7 +444,7 @@ static int ath10k_download_and_run_otp(struct ath10k *ar)
 		return ret;
 	}
 
-	ret = ath10k_bmi_execute(ar, address, 0, &result);
+	ret = ath10k_bmi_execute(ar, address, bmi_otp_exe_param, &result);
 	if (ret) {
 		ath10k_err(ar, "could not execute otp (%d)\n", ret);
 		return ret;

drivers/net/wireless/ath/ath10k/core.h

@@ -572,6 +572,7 @@ struct ath10k {
 		const char *name;
 		u32 patch_load_addr;
 		int uart_pin;
+		u32 otp_exe_param;
 
 		/* This is true if given HW chip has a quirky Cycle Counter
 		 * wraparound which resets to 0x7fffffff instead of 0. All