drivers/net: Fix various unnecessary characters after logging newlines

Remove and coalesce formats when there is an unnecessary
character after a logging newline.  These extra characters
cause logging defects.

Miscellanea:

o Coalesce formats

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/cavium/liquidio/lio_main.c

@@ -1766,7 +1766,7 @@ static int load_firmware(struct octeon_device *oct)
 
 	ret = request_firmware(&fw, fw_name, &oct->pci_dev->dev);
 	if (ret) {
-		dev_err(&oct->pci_dev->dev, "Request firmware failed. Could not find file %s.\n.",
+		dev_err(&oct->pci_dev->dev, "Request firmware failed. Could not find file %s.\n",
 			fw_name);
 		release_firmware(fw);
 		return ret;

drivers/net/ethernet/qlogic/netxen/netxen_nic_ctx.c

@@ -146,8 +146,7 @@ netxen_get_minidump_template(struct netxen_adapter *adapter)
 	if ((cmd.rsp.cmd == NX_RCODE_SUCCESS) && (size == cmd.rsp.arg2)) {
 		memcpy(adapter->mdump.md_template, addr, size);
 	} else {
-		dev_err(&adapter->pdev->dev, "Failed to get minidump template, "
-			"err_code : %d, requested_size : %d, actual_size : %d\n ",
+		dev_err(&adapter->pdev->dev, "Failed to get minidump template, err_code : %d, requested_size : %d, actual_size : %d\n",
 			cmd.rsp.cmd, size, cmd.rsp.arg2);
 	}
 	pci_free_consistent(adapter->pdev, size, addr, md_template_addr);
@@ -180,8 +179,7 @@ netxen_setup_minidump(struct netxen_adapter *adapter)
 		if ((err == NX_RCODE_CMD_INVALID) ||
 			(err == NX_RCODE_CMD_NOT_IMPL)) {
 			dev_info(&adapter->pdev->dev,
-				"Flashed firmware version does not support minidump, "
-				"minimum version required is [ %u.%u.%u ].\n ",
+				"Flashed firmware version does not support minidump, minimum version required is [ %u.%u.%u ]\n",
 				NX_MD_SUPPORT_MAJOR, NX_MD_SUPPORT_MINOR,
 				NX_MD_SUPPORT_SUBVERSION);
 		}

drivers/net/ethernet/qlogic/qed/qed_dev.c

@@ -1098,7 +1098,7 @@ int qed_final_cleanup(struct qed_hwfn *p_hwfn,
 	}
 
 	DP_VERBOSE(p_hwfn, QED_MSG_IOV,
-		   "Sending final cleanup for PFVF[%d] [Command %08x\n]",
+		   "Sending final cleanup for PFVF[%d] [Command %08x]\n",
 		   id, command);
 
 	qed_wr(p_hwfn, p_ptt, XSDM_REG_OPERATION_GEN, command);

drivers/net/ethernet/qlogic/qlge/qlge_main.c

@@ -2211,7 +2211,7 @@ static int ql_clean_outbound_rx_ring(struct rx_ring *rx_ring)
 	while (prod != rx_ring->cnsmr_idx) {
 
 		netif_printk(qdev, rx_status, KERN_DEBUG, qdev->ndev,
-			     "cq_id = %d, prod = %d, cnsmr = %d.\n.",
+			     "cq_id = %d, prod = %d, cnsmr = %d\n",
 			     rx_ring->cq_id, prod, rx_ring->cnsmr_idx);
 
 		net_rsp = (struct ob_mac_iocb_rsp *)rx_ring->curr_entry;
@@ -2258,7 +2258,7 @@ static int ql_clean_inbound_rx_ring(struct rx_ring *rx_ring, int budget)
 	while (prod != rx_ring->cnsmr_idx) {
 
 		netif_printk(qdev, rx_status, KERN_DEBUG, qdev->ndev,
-			     "cq_id = %d, prod = %d, cnsmr = %d.\n.",
+			     "cq_id = %d, prod = %d, cnsmr = %d\n",
 			     rx_ring->cq_id, prod, rx_ring->cnsmr_idx);
 
 		net_rsp = rx_ring->curr_entry;

drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c

@@ -1264,7 +1264,7 @@ static void brcmf_link_down(struct brcmf_cfg80211_vif *vif, u16 reason)
 	brcmf_dbg(TRACE, "Enter\n");
 
 	if (test_and_clear_bit(BRCMF_VIF_STATUS_CONNECTED, &vif->sme_state)) {
-		brcmf_dbg(INFO, "Call WLC_DISASSOC to stop excess roaming\n ");
+		brcmf_dbg(INFO, "Call WLC_DISASSOC to stop excess roaming\n");
 		err = brcmf_fil_cmd_data_set(vif->ifp,
 					     BRCMF_C_DISASSOC, NULL, 0);
 		if (err) {

drivers/net/wireless/intel/ipw2x00/ipw2200.c

@@ -7557,8 +7557,7 @@ static int ipw_associate(void *data)
 	}
 
 	if (priv->status & STATUS_DISASSOCIATING) {
-		IPW_DEBUG_ASSOC("Not attempting association (in "
-				"disassociating)\n ");
+		IPW_DEBUG_ASSOC("Not attempting association (in disassociating)\n");
 		schedule_work(&priv->associate);
 		return 0;
 	}

drivers/net/wireless/intersil/prism54/islpci_eth.c

@@ -57,7 +57,7 @@ islpci_eth_cleanup_transmit(islpci_private *priv,
 
 #if VERBOSE > SHOW_ERROR_MESSAGES
 			DEBUG(SHOW_TRACING,
-			      "cleanup skb %p skb->data %p skb->len %u truesize %u\n ",
+			      "cleanup skb %p skb->data %p skb->len %u truesize %u\n",
 			      skb, skb->data, skb->len, skb->truesize);
 #endif
 
@@ -328,7 +328,7 @@ islpci_eth_receive(islpci_private *priv)
 
 #if VERBOSE > SHOW_ERROR_MESSAGES
 	DEBUG(SHOW_TRACING,
-	      "frq->addr %x skb->data %p skb->len %u offset %u truesize %u\n ",
+	      "frq->addr %x skb->data %p skb->len %u offset %u truesize %u\n",
 	      control_block->rx_data_low[priv->free_data_rx].address, skb->data,
 	      skb->len, offset, skb->truesize);
 #endif
@@ -436,7 +436,7 @@ islpci_eth_receive(islpci_private *priv)
 
 #if VERBOSE > SHOW_ERROR_MESSAGES
 		DEBUG(SHOW_TRACING,
-		      "new alloc skb %p skb->data %p skb->len %u index %u truesize %u\n ",
+		      "new alloc skb %p skb->data %p skb->len %u index %u truesize %u\n",
 		      skb, skb->data, skb->len, index, skb->truesize);
 #endif
 

drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192e.c

@@ -1267,8 +1267,8 @@ static void rtl8192eu_phy_iq_calibrate(struct rtl8xxxu_priv *priv)
 		reg_ecc = result[candidate][7];
 		dev_dbg(dev, "%s: candidate is %x\n", __func__, candidate);
 		dev_dbg(dev,
-			"%s: e94 =%x e9c=%x ea4=%x eac=%x eb4=%x ebc=%x ec4=%x "
-			"ecc=%x\n ", __func__, reg_e94, reg_e9c,
+			"%s: e94 =%x e9c=%x ea4=%x eac=%x eb4=%x ebc=%x ec4=%x ecc=%x\n",
+			__func__, reg_e94, reg_e9c,
 			reg_ea4, reg_eac, reg_eb4, reg_ebc, reg_ec4, reg_ecc);
 		path_a_ok = true;
 		path_b_ok = true;

drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8723b.c

@@ -1175,8 +1175,8 @@ static void rtl8723bu_phy_iq_calibrate(struct rtl8xxxu_priv *priv)
 		reg_ecc = result[candidate][7];
 		dev_dbg(dev, "%s: candidate is %x\n", __func__, candidate);
 		dev_dbg(dev,
-			"%s: e94 =%x e9c=%x ea4=%x eac=%x eb4=%x ebc=%x ec4=%x "
-			"ecc=%x\n ", __func__, reg_e94, reg_e9c,
+			"%s: e94 =%x e9c=%x ea4=%x eac=%x eb4=%x ebc=%x ec4=%x ecc=%x\n",
+			__func__, reg_e94, reg_e9c,
 			reg_ea4, reg_eac, reg_eb4, reg_ebc, reg_ec4, reg_ecc);
 		path_a_ok = true;
 		path_b_ok = true;

drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c

@@ -3406,8 +3406,8 @@ void rtl8xxxu_gen1_phy_iq_calibrate(struct rtl8xxxu_priv *priv)
 		reg_ecc = result[candidate][7];
 		dev_dbg(dev, "%s: candidate is %x\n", __func__, candidate);
 		dev_dbg(dev,
-			"%s: e94 =%x e9c=%x ea4=%x eac=%x eb4=%x ebc=%x ec4=%x "
-			"ecc=%x\n ", __func__, reg_e94, reg_e9c,
+			"%s: e94 =%x e9c=%x ea4=%x eac=%x eb4=%x ebc=%x ec4=%x ecc=%x\n",
+			__func__, reg_e94, reg_e9c,
 			reg_ea4, reg_eac, reg_eb4, reg_ebc, reg_ec4, reg_ecc);
 		path_a_ok = true;
 		path_b_ok = true;

drivers/net/wireless/realtek/rtlwifi/rtl8821ae/dm.c

@@ -2642,7 +2642,7 @@ static void rtl8821ae_dm_edca_choose_traffic_idx(
 		if (cur_tx_bytes > (cur_rx_bytes*4)) {
 			*pb_is_cur_rdl_state = false;
 			RT_TRACE(rtlpriv, COMP_TURBO, DBG_LOUD,
-				 "Uplink Traffic\n ");
+				 "Uplink Traffic\n");
 		} else {
 			*pb_is_cur_rdl_state = true;
 			RT_TRACE(rtlpriv, COMP_TURBO, DBG_LOUD,