Merge branch 'amd-xgbe-next'

Tom Lendacky says:

====================
amd-xgbe: Remove baseT workaround for fixed speeds

The following series expands the speed/duplex settings array in phy.c
to support additional media types. With this expansion the workaround
in the amd-xgbe driver to set/remove baseT media types based on whether
auto negotiation is enabled can be removed.

This patch series is based on net-next.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/amd/xgbe/xgbe-ethtool.c

@@ -331,16 +331,6 @@ static int xgbe_set_settings(struct net_device *netdev,
 	     (cmd->duplex != DUPLEX_FULL)))
 		goto unlock;
 
-	if (cmd->autoneg == AUTONEG_ENABLE) {
-		/* Clear settings needed to force speeds */
-		phydev->supported &= ~SUPPORTED_1000baseT_Full;
-		phydev->supported &= ~SUPPORTED_10000baseT_Full;
-	} else {
-		/* Add settings needed to force speed */
-		phydev->supported |= SUPPORTED_1000baseT_Full;
-		phydev->supported |= SUPPORTED_10000baseT_Full;
-	}
-
 	cmd->advertising &= phydev->supported;
 	if ((cmd->autoneg == AUTONEG_ENABLE) && !cmd->advertising)
 		goto unlock;

drivers/net/ethernet/amd/xgbe/xgbe-mdio.c

@@ -375,10 +375,6 @@ int xgbe_mdio_register(struct xgbe_prv_data *pdata)
 
 	phydev->autoneg = pdata->default_autoneg;
 	if (phydev->autoneg == AUTONEG_DISABLE) {
-		/* Add settings needed to force speed */
-		phydev->supported |= SUPPORTED_1000baseT_Full;
-		phydev->supported |= SUPPORTED_10000baseT_Full;
-
 		phydev->speed = pdata->default_speed;
 		phydev->duplex = DUPLEX_FULL;
 

drivers/net/phy/phy.c

@@ -138,10 +138,30 @@ struct phy_setting {
 /* A mapping of all SUPPORTED settings to speed/duplex */
 static const struct phy_setting settings[] = {
 	{
-		.speed = 10000,
+		.speed = SPEED_10000,
+		.duplex = DUPLEX_FULL,
+		.setting = SUPPORTED_10000baseKR_Full,
+	},
+	{
+		.speed = SPEED_10000,
+		.duplex = DUPLEX_FULL,
+		.setting = SUPPORTED_10000baseKX4_Full,
+	},
+	{
+		.speed = SPEED_10000,
 		.duplex = DUPLEX_FULL,
 		.setting = SUPPORTED_10000baseT_Full,
 	},
+	{
+		.speed = SPEED_2500,
+		.duplex = DUPLEX_FULL,
+		.setting = SUPPORTED_2500baseX_Full,
+	},
+	{
+		.speed = SPEED_1000,
+		.duplex = DUPLEX_FULL,
+		.setting = SUPPORTED_1000baseKX_Full,
+	},
 	{
 		.speed = SPEED_1000,
 		.duplex = DUPLEX_FULL,