Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

Pull input subsystem updates from Dmitry Torokhov:
 "You will get

   - a new driver for Elan eKTF2127 touchscreen controllers

   - a new "gpio-decoder" driver to read and report state of several
     GPIO lines

   - an ADC resistor ladder driver

   - the ft6326 driver is removed because edt-ft5x06 handles the same
     devices just fine.

  .. plus the regular slew of driver fixes/enhancements"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (26 commits)
  Input: elan_i2c - fix return tests of i2c_smbus_read_block_data()
  Input: ektf2127 - mark PM functions as __maybe_unused
  Input: snvs_pwrkey - drop input_free_device call if input_register_device fails
  Input: add support for Elan eKTF2127 touchscreen controller
  Input: serio - add hangup support
  Input: tps65218-pwrbutton - add support for tps65217 variant
  Input: jornada720_ts - get rid of mach/irqs.h and mach/hardware.h includes
  Input: jornada720_kbd - remove unneeded mach/hardware.h include
  Input: focaltech - mark focaltech_set_resolution() static
  Input: wdt87xx_i2c - fix the flash erase issue
  Input: gpio-keys-polled - don't use unit-address with button nodes
  Input: add generic input driver to read encoded GPIO lines
  Input: add ADC resistor ladder driver
  Input: pegasus_notetaker - directly include workqueue header
  Input: elants_i2c - get product id on recovery mode for FW update
  Input: wm97xx - remove deprecated create_singletheread_workqueue
  Input: mc13783_ts - remove deprecated create_singletheread_workqueue
  Input: psmouse - remove deprecated create_singletheread_workqueue
  Input: jornada720_kbd - switch to using dev_dbg
  Input: jornada720_kbd - get rid of mach/irqs.h include
  ...

Documentation/devicetree/bindings/input/adc-keys.txt

@@ -0,0 +1,49 @@
+ADC attached resistor ladder buttons
+------------------------------------
+
+Required properties:
+ - compatible: "adc-keys"
+ - io-channels: Phandle to an ADC channel
+ - io-channel-names = "buttons";
+ - keyup-threshold-microvolt: Voltage at which all the keys are considered up.
+
+Optional properties:
+	- poll-interval: Poll interval time in milliseconds
+	- autorepeat: Boolean, Enable auto repeat feature of Linux input
+	  subsystem.
+
+Each button (key) is represented as a sub-node of "adc-keys":
+
+Required subnode-properties:
+	- label: Descriptive name of the key.
+	- linux,code: Keycode to emit.
+	- press-threshold-microvolt: Voltage ADC input when this key is pressed.
+
+Example:
+
+#include <dt-bindings/input/input.h>
+
+	adc-keys {
+		compatible = "adc-keys";
+		io-channels = <&lradc 0>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <2000000>;
+
+		button-up {
+			label = "Volume Up";
+			linux,code = <KEY_VOLUMEUP>;
+			press-threshold-microvolt = <1500000>;
+		};
+
+		button-down {
+			label = "Volume Down";
+			linux,code = <KEY_VOLUMEDOWN>;
+			press-threshold-microvolt = <1000000>;
+		};
+
+		button-enter {
+			label = "Enter";
+			linux,code = <KEY_ENTER>;
+			press-threshold-microvolt = <500000>;
+		};
+	};

Documentation/devicetree/bindings/input/gpio-decoder.txt

@@ -0,0 +1,23 @@
+* GPIO Decoder DT bindings
+
+Required Properties:
+- compatible: should be "gpio-decoder"
+- gpios: a spec of gpios (at least two) to be decoded to a number with
+  first entry representing the MSB.
+
+Optional Properties:
+- decoder-max-value: Maximum possible value that can be reported by
+  the gpios.
+- linux,axis: the input subsystem axis to map to (ABS_X/ABS_Y).
+  Defaults to 0 (ABS_X).
+
+Example:
+	gpio-decoder0 {
+		compatible = "gpio-decoder";
+		gpios = <&pca9536 3 GPIO_ACTIVE_HIGH>,
+			<&pca9536 2 GPIO_ACTIVE_HIGH>,
+			<&pca9536 1 GPIO_ACTIVE_HIGH>,
+			<&pca9536 0 GPIO_ACTIVE_HIGH>;
+		linux,axis = <0>; /* ABS_X */
+		decoder-max-value = <9>;
+	};

Documentation/devicetree/bindings/input/gpio-keys-polled.txt

@@ -34,11 +34,10 @@ Example nodes:
 
 	gpio_keys_polled {
 			compatible = "gpio-keys-polled";
-			#address-cells = <1>;
-			#size-cells = <0>;
 			poll-interval = <100>;
 			autorepeat;
-			button@21 {
+
+			button21 {
 				label = "GPIO Key UP";
 				linux,code = <103>;
 				gpios = <&gpio1 0 1>;

Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.txt

@@ -19,6 +19,7 @@ Required properties:
            or:  "edt,edt-ft5306"
            or:  "edt,edt-ft5406"
            or:  "edt,edt-ft5506"
+           or:  "focaltech,ft6236"
 
  - reg:         I2C slave address of the chip (0x38)
  - interrupt-parent: a phandle pointing to the interrupt controller
@@ -43,6 +44,13 @@ Optional properties:
 
  - offset:      allows setting the edge compensation in the range from
                 0 to 31.
+ - touchscreen-size-x	   : See touchscreen.txt
+ - touchscreen-size-y	   : See touchscreen.txt
+ - touchscreen-fuzz-x      : See touchscreen.txt
+ - touchscreen-fuzz-y      : See touchscreen.txt
+ - touchscreen-inverted-x  : See touchscreen.txt
+ - touchscreen-inverted-y  : See touchscreen.txt
+ - touchscreen-swapped-x-y : See touchscreen.txt
 
 Example:
 	polytouch: edt-ft5x06@38 {

Documentation/devicetree/bindings/input/touchscreen/ektf2127.txt

@@ -0,0 +1,27 @@
+* Elan eKTF2127 I2C touchscreen controller
+
+Required properties:
+ - compatible		  : "elan,ektf2127"
+ - reg			  : I2C slave address of the chip (0x40)
+ - interrupt-parent	  : a phandle pointing to the interrupt controller
+			    serving the interrupt for this chip
+ - interrupts		  : interrupt specification for the ektf2127 interrupt
+ - power-gpios		  : GPIO specification for the pin connected to the
+			    ektf2127's wake input. This needs to be driven high
+			    to take ektf2127 out of it's low power state
+
+For additional optional properties see: touchscreen.txt
+
+Example:
+
+i2c@00000000 {
+	ektf2127: touchscreen@15 {
+		compatible = "elan,ektf2127";
+		reg = <0x15>;
+		interrupt-parent = <&pio>;
+		interrupts = <6 11 IRQ_TYPE_EDGE_FALLING>
+		power-gpios = <&pio 1 3 GPIO_ACTIVE_HIGH>;
+		touchscreen-inverted-x;
+		touchscreen-swapped-x-y;
+	};
+};

Documentation/devicetree/bindings/input/touchscreen/focaltech-ft6236.txt

@@ -1,35 +0,0 @@
-* FocalTech FT6236 I2C touchscreen controller
-
-Required properties:
- - compatible		  : "focaltech,ft6236"
- - reg			  : I2C slave address of the chip (0x38)
- - interrupt-parent	  : a phandle pointing to the interrupt controller
-			    serving the interrupt for this chip
- - interrupts		  : interrupt specification for the touch controller
-			    interrupt
- - reset-gpios		  : GPIO specification for the RSTN input
- - touchscreen-size-x	  : horizontal resolution of touchscreen (in pixels)
- - touchscreen-size-y	  : vertical resolution of touchscreen (in pixels)
-
-Optional properties:
- - touchscreen-fuzz-x	  : horizontal noise value of the absolute input
-			    device (in pixels)
- - touchscreen-fuzz-y	  : vertical noise value of the absolute input
-			    device (in pixels)
- - touchscreen-inverted-x : X axis is inverted (boolean)
- - touchscreen-inverted-y : Y axis is inverted (boolean)
- - touchscreen-swapped-x-y: X and Y axis are swapped (boolean)
-			    Swapping is done after inverting the axis
-
-Example:
-
-	ft6x06@38 {
-		compatible = "focaltech,ft6236";
-		reg = <0x38>;
-		interrupt-parent = <&gpio>;
-		interrupts = <23 2>;
-		touchscreen-size-x = <320>;
-		touchscreen-size-y = <480>;
-		touchscreen-inverted-x;
-		touchscreen-swapped-x-y;
-	};

Documentation/devicetree/bindings/input/tps65218-pwrbutton.txt

@@ -1,13 +1,24 @@
-Texas Instruments TPS65218 power button
+Texas Instruments TPS65217 and TPS65218 power button
+
+This module is part of the TPS65217/TPS65218. For more details about the whole
+TPS65217 chip see Documentation/devicetree/bindings/regulator/tps65217.txt.
 
 This driver provides a simple power button event via an Interrupt.
 
 Required properties:
-- compatible: should be "ti,tps65218-pwrbutton"
+- compatible: should be "ti,tps65217-pwrbutton" or "ti,tps65218-pwrbutton"
+
+Required properties for TPS65218:
 - interrupts: should be one of the following
    - <3 IRQ_TYPE_EDGE_BOTH>: For controllers compatible with tps65218
 
-Example:
+Examples:
+
+&tps {
+	tps65217-pwrbutton {
+		compatible = "ti,tps65217-pwrbutton";
+	};
+};
 
 &tps {
 	power-button {

arch/arm/mach-sa1100/jornada720.c

@@ -17,6 +17,7 @@
 #include <linux/kernel.h>
 #include <linux/tty.h>
 #include <linux/delay.h>
+#include <linux/gpio/machine.h>
 #include <linux/platform_data/sa11x0-serial.h>
 #include <linux/platform_device.h>
 #include <linux/ioport.h>
@@ -217,9 +218,22 @@ static struct platform_device jornada_ssp_device = {
 	.id             = -1,
 };
 
+static struct resource jornada_kbd_resources[] = {
+	DEFINE_RES_IRQ(IRQ_GPIO0),
+};
+
 static struct platform_device jornada_kbd_device = {
 	.name		= "jornada720_kbd",
 	.id		= -1,
+	.num_resources	= ARRAY_SIZE(jornada_kbd_resources),
+	.resource	= jornada_kbd_resources,
+};
+
+static struct gpiod_lookup_table jornada_ts_gpiod_table = {
+	.dev_id		= "jornada_ts",
+	.table		= {
+		GPIO_LOOKUP("gpio", 9, "penup", GPIO_ACTIVE_HIGH),
+	},
 };
 
 static struct platform_device jornada_ts_device = {
@@ -250,6 +264,8 @@ static int __init jornada720_init(void)
 		GPSR = GPIO_GPIO20;	/* restart gpio20 */
 		udelay(20);		/* give it some time to restart */
 
+		gpiod_add_lookup_table(&jornada_ts_gpiod_table);
+
 		ret = platform_add_devices(devices, ARRAY_SIZE(devices));
 	}
 

drivers/input/keyboard/Kconfig

@@ -12,6 +12,21 @@ menuconfig INPUT_KEYBOARD
 
 if INPUT_KEYBOARD
 
+config KEYBOARD_ADC
+	tristate "ADC Ladder Buttons"
+	depends on IIO
+	select INPUT_POLLDEV
+	help
+	  This driver implements support for buttons connected
+	  to an ADC using a resistor ladder.
+
+	  Say Y here if your device has such buttons connected to an ADC.  Your
+	  board-specific setup logic must also provide a configuration data
+	  for mapping voltages to buttons.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called adc_keys.
+
 config KEYBOARD_ADP5520
 	tristate "Keypad Support for ADP5520 PMIC"
 	depends on PMIC_ADP5520

drivers/input/keyboard/Makefile

@@ -4,6 +4,7 @@
 
 # Each configuration option enables a list of files.
 
+obj-$(CONFIG_KEYBOARD_ADC)		+= adc-keys.o
 obj-$(CONFIG_KEYBOARD_ADP5520)		+= adp5520-keys.o
 obj-$(CONFIG_KEYBOARD_ADP5588)		+= adp5588-keys.o
 obj-$(CONFIG_KEYBOARD_ADP5589)		+= adp5589-keys.o

drivers/input/keyboard/adc-keys.c

@@ -0,0 +1,210 @@
+/*
+ * Input driver for resistor ladder connected on ADC
+ *
+ * Copyright (c) 2016 Alexandre Belloni
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+#include <linux/err.h>
+#include <linux/iio/consumer.h>
+#include <linux/iio/types.h>
+#include <linux/input.h>
+#include <linux/input-polldev.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/property.h>
+#include <linux/slab.h>
+
+struct adc_keys_button {
+	u32 voltage;
+	u32 keycode;
+};
+
+struct adc_keys_state {
+	struct iio_channel *channel;
+	u32 num_keys;
+	u32 last_key;
+	u32 keyup_voltage;
+	const struct adc_keys_button *map;
+};
+
+static void adc_keys_poll(struct input_polled_dev *dev)
+{
+	struct adc_keys_state *st = dev->private;
+	int i, value, ret;
+	u32 diff, closest = 0xffffffff;
+	int keycode = 0;
+
+	ret = iio_read_channel_processed(st->channel, &value);
+	if (unlikely(ret < 0)) {
+		/* Forcibly release key if any was pressed */
+		value = st->keyup_voltage;
+	} else {
+		for (i = 0; i < st->num_keys; i++) {
+			diff = abs(st->map[i].voltage - value);
+			if (diff < closest) {
+				closest = diff;
+				keycode = st->map[i].keycode;
+			}
+		}
+	}
+
+	if (abs(st->keyup_voltage - value) < closest)
+		keycode = 0;
+
+	if (st->last_key && st->last_key != keycode)
+		input_report_key(dev->input, st->last_key, 0);
+
+	if (keycode)
+		input_report_key(dev->input, keycode, 1);
+
+	input_sync(dev->input);
+	st->last_key = keycode;
+}
+
+static int adc_keys_load_keymap(struct device *dev, struct adc_keys_state *st)
+{
+	struct adc_keys_button *map;
+	struct fwnode_handle *child;
+	int i;
+
+	st->num_keys = device_get_child_node_count(dev);
+	if (st->num_keys == 0) {
+		dev_err(dev, "keymap is missing\n");
+		return -EINVAL;
+	}
+
+	map = devm_kmalloc_array(dev, st->num_keys, sizeof(*map), GFP_KERNEL);
+	if (!map)
+		return -ENOMEM;
+
+	i = 0;
+	device_for_each_child_node(dev, child) {
+		if (fwnode_property_read_u32(child, "press-threshold-microvolt",
+					     &map[i].voltage)) {
+			dev_err(dev, "Key with invalid or missing voltage\n");
+			fwnode_handle_put(child);
+			return -EINVAL;
+		}
+		map[i].voltage /= 1000;
+
+		if (fwnode_property_read_u32(child, "linux,code",
+					     &map[i].keycode)) {
+			dev_err(dev, "Key with invalid or missing linux,code\n");
+			fwnode_handle_put(child);
+			return -EINVAL;
+		}
+
+		i++;
+	}
+
+	st->map = map;
+	return 0;
+}
+
+static int adc_keys_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct adc_keys_state *st;
+	struct input_polled_dev *poll_dev;
+	struct input_dev *input;
+	enum iio_chan_type type;
+	int i, value;
+	int error;
+
+	st = devm_kzalloc(dev, sizeof(*st), GFP_KERNEL);
+	if (!st)
+		return -ENOMEM;
+
+	st->channel = devm_iio_channel_get(dev, "buttons");
+	if (IS_ERR(st->channel))
+		return PTR_ERR(st->channel);
+
+	if (!st->channel->indio_dev)
+		return -ENXIO;
+
+	error = iio_get_channel_type(st->channel, &type);
+	if (error < 0)
+		return error;
+
+	if (type != IIO_VOLTAGE) {
+		dev_err(dev, "Incompatible channel type %d\n", type);
+		return -EINVAL;
+	}
+
+	if (device_property_read_u32(dev, "keyup-threshold-microvolt",
+				     &st->keyup_voltage)) {
+		dev_err(dev, "Invalid or missing keyup voltage\n");
+		return -EINVAL;
+	}
+	st->keyup_voltage /= 1000;
+
+	error = adc_keys_load_keymap(dev, st);
+	if (error)
+		return error;
+
+	platform_set_drvdata(pdev, st);
+
+	poll_dev = devm_input_allocate_polled_device(dev);
+	if (!poll_dev) {
+		dev_err(dev, "failed to allocate input device\n");
+		return -ENOMEM;
+	}
+
+	if (!device_property_read_u32(dev, "poll-interval", &value))
+		poll_dev->poll_interval = value;
+
+	poll_dev->poll = adc_keys_poll;
+	poll_dev->private = st;
+
+	input = poll_dev->input;
+
+	input->name = pdev->name;
+	input->phys = "adc-keys/input0";
+
+	input->id.bustype = BUS_HOST;
+	input->id.vendor = 0x0001;
+	input->id.product = 0x0001;
+	input->id.version = 0x0100;
+
+	__set_bit(EV_KEY, input->evbit);
+	for (i = 0; i < st->num_keys; i++)
+		__set_bit(st->map[i].keycode, input->keybit);
+
+	if (device_property_read_bool(dev, "autorepeat"))
+		__set_bit(EV_REP, input->evbit);
+
+	error = input_register_polled_device(poll_dev);
+	if (error) {
+		dev_err(dev, "Unable to register input device: %d\n", error);
+		return error;
+	}
+
+	return 0;
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id adc_keys_of_match[] = {
+	{ .compatible = "adc-keys", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, adc_keys_of_match);
+#endif
+
+static struct platform_driver __refdata adc_keys_driver = {
+	.driver = {
+		.name = "adc_keys",
+		.of_match_table = of_match_ptr(adc_keys_of_match),
+	},
+	.probe = adc_keys_probe,
+};
+module_platform_driver(adc_keys_driver);
+
+MODULE_AUTHOR("Alexandre Belloni <alexandre.belloni@free-electrons.com>");
+MODULE_DESCRIPTION("Input driver for resistor ladder connected on ADC");
+MODULE_LICENSE("GPL v2");

drivers/input/keyboard/jornada720_kbd.c

@@ -25,8 +25,6 @@
 #include <linux/slab.h>
 
 #include <mach/jornada720.h>
-#include <mach/hardware.h>
-#include <mach/irqs.h>
 
 MODULE_AUTHOR("Kristoffer Ericson <Kristoffer.Ericson@gmail.com>");
 MODULE_DESCRIPTION("HP Jornada 710/720/728 keyboard driver");
@@ -66,10 +64,8 @@ static irqreturn_t jornada720_kbd_interrupt(int irq, void *dev_id)
 	jornada_ssp_start();
 
 	if (jornada_ssp_inout(GETSCANKEYCODE) != TXDUMMY) {
-		printk(KERN_DEBUG
-			"jornada720_kbd: "
-			"GetKeycode command failed with ETIMEDOUT, "
-			"flushed bus\n");
+		dev_dbg(&pdev->dev,
+			"GetKeycode command failed with ETIMEDOUT, flushed bus\n");
 	} else {
 		/* How many keycodes are waiting for us? */
 		count = jornada_ssp_byte(TXDUMMY);
@@ -97,14 +93,16 @@ static int jornada720_kbd_probe(struct platform_device *pdev)
 {
 	struct jornadakbd *jornadakbd;
 	struct input_dev *input_dev;
-	int i, err;
+	int i, err, irq;
 
-	jornadakbd = kzalloc(sizeof(struct jornadakbd), GFP_KERNEL);
-	input_dev = input_allocate_device();
-	if (!jornadakbd || !input_dev) {
-		err = -ENOMEM;
-		goto fail1;
-	}
+	irq = platform_get_irq(pdev, 0);
+	if (irq <= 0)
+		return irq < 0 ? irq : -EINVAL;
+
+	jornadakbd = devm_kzalloc(&pdev->dev, sizeof(*jornadakbd), GFP_KERNEL);
+	input_dev = devm_input_allocate_device(&pdev->dev);
+	if (!jornadakbd || !input_dev)
+		return -ENOMEM;
 
 	platform_set_drvdata(pdev, jornadakbd);
 
@@ -127,40 +125,16 @@ static int jornada720_kbd_probe(struct platform_device *pdev)
 
 	input_set_capability(input_dev, EV_MSC, MSC_SCAN);
 
-	err = request_irq(IRQ_GPIO0,
-			  jornada720_kbd_interrupt,
-			  IRQF_TRIGGER_FALLING,
-			  "jornadakbd", pdev);
+	err = devm_request_irq(&pdev->dev, irq, jornada720_kbd_interrupt,
+			       IRQF_TRIGGER_FALLING, "jornadakbd", pdev);
 	if (err) {
-		printk(KERN_INFO "jornadakbd720_kbd: Unable to grab IRQ\n");
-		goto fail1;
+		dev_err(&pdev->dev, "unable to grab IRQ%d: %d\n", irq, err);
+		return err;
 	}
 
-	err = input_register_device(jornadakbd->input);
-	if (err)
-		goto fail2;
-
-	return 0;
-
- fail2:	/* IRQ, DEVICE, MEMORY */
-	free_irq(IRQ_GPIO0, pdev);
- fail1:	/* DEVICE, MEMORY */
-	input_free_device(input_dev);
-	kfree(jornadakbd);
-	return err;
+	return input_register_device(jornadakbd->input);
 };
 
-static int jornada720_kbd_remove(struct platform_device *pdev)
-{
-	struct jornadakbd *jornadakbd = platform_get_drvdata(pdev);
-
-	free_irq(IRQ_GPIO0, pdev);
-	input_unregister_device(jornadakbd->input);
-	kfree(jornadakbd);
-
-	return 0;
-}
-
 /* work with hotplug and coldplug */
 MODULE_ALIAS("platform:jornada720_kbd");
 
@@ -169,6 +143,5 @@ static struct platform_driver jornada720_kbd_driver = {
 		.name    = "jornada720_kbd",
 	 },
 	.probe   = jornada720_kbd_probe,
-	.remove  = jornada720_kbd_remove,
 };
 module_platform_driver(jornada720_kbd_driver);

drivers/input/keyboard/snvs_pwrkey.c

@@ -168,7 +168,6 @@ static int imx_snvs_pwrkey_probe(struct platform_device *pdev)
 	error = input_register_device(input);
 	if (error < 0) {
 		dev_err(&pdev->dev, "failed to register input device\n");
-		input_free_device(input);
 		return error;
 	}
 

drivers/input/misc/Kconfig

@@ -292,6 +292,18 @@ config INPUT_GPIO_TILT_POLLED
 	  To compile this driver as a module, choose M here: the
 	  module will be called gpio_tilt_polled.
 
+config INPUT_GPIO_DECODER
+	tristate "Polled GPIO Decoder Input driver"
+	depends on GPIOLIB || COMPILE_TEST
+	select INPUT_POLLDEV
+	help
+	 Say Y here if you want driver to read status of multiple GPIO
+	 lines and report the encoded value as an absolute integer to
+	 input subsystem.
+
+	 To compile this driver as a module, choose M here: the module
+	 will be called gpio_decoder.
+
 config INPUT_IXP4XX_BEEPER
 	tristate "IXP4XX Beeper support"
 	depends on ARCH_IXP4XX
@@ -454,10 +466,10 @@ config INPUT_RETU_PWRBUTTON
 
 config INPUT_TPS65218_PWRBUTTON
 	tristate "TPS65218 Power button driver"
-	depends on MFD_TPS65218
+	depends on (MFD_TPS65217 || MFD_TPS65218)
 	help
 	  Say Y here if you want to enable power buttong reporting for
-	  the TPS65218 Power Management IC device.
+	  TPS65217 and TPS65218 Power Management IC devices.
 
 	  To compile this driver as a module, choose M here. The module will
 	  be called tps65218-pwrbutton.

drivers/input/misc/Makefile

@@ -35,6 +35,7 @@ obj-$(CONFIG_INPUT_DRV2667_HAPTICS)	+= drv2667.o
 obj-$(CONFIG_INPUT_GP2A)		+= gp2ap002a00f.o
 obj-$(CONFIG_INPUT_GPIO_BEEPER)		+= gpio-beeper.o
 obj-$(CONFIG_INPUT_GPIO_TILT_POLLED)	+= gpio_tilt_polled.o
+obj-$(CONFIG_INPUT_GPIO_DECODER)	+= gpio_decoder.o
 obj-$(CONFIG_INPUT_HISI_POWERKEY)	+= hisi_powerkey.o
 obj-$(CONFIG_HP_SDC_RTC)		+= hp_sdc_rtc.o
 obj-$(CONFIG_INPUT_IMS_PCU)		+= ims-pcu.o

drivers/input/misc/gpio_decoder.c

@@ -0,0 +1,137 @@
+/*
+ * Copyright (C) 2016 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * A generic driver to read multiple gpio lines and translate the
+ * encoded numeric value into an input event.
+ */
+
+#include <linux/device.h>
+#include <linux/gpio/consumer.h>
+#include <linux/input.h>
+#include <linux/input-polldev.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+
+struct gpio_decoder {
+	struct input_polled_dev *poll_dev;
+	struct gpio_descs *input_gpios;
+	struct device *dev;
+	u32 axis;
+	u32 last_stable;
+};
+
+static int gpio_decoder_get_gpios_state(struct gpio_decoder *decoder)
+{
+	struct gpio_descs *gpios = decoder->input_gpios;
+	unsigned int ret = 0;
+	int i, val;
+
+	for (i = 0; i < gpios->ndescs; i++) {
+		val = gpiod_get_value_cansleep(gpios->desc[i]);
+		if (val < 0) {
+			dev_err(decoder->dev,
+				"Error reading gpio %d: %d\n",
+				desc_to_gpio(gpios->desc[i]), val);
+			return val;
+		}
+
+		val = !!val;
+		ret = (ret << 1) | val;
+	}
+
+	return ret;
+}
+
+static void gpio_decoder_poll_gpios(struct input_polled_dev *poll_dev)
+{
+	struct gpio_decoder *decoder = poll_dev->private;
+	int state;
+
+	state = gpio_decoder_get_gpios_state(decoder);
+	if (state >= 0 && state != decoder->last_stable) {
+		input_report_abs(poll_dev->input, decoder->axis, state);
+		input_sync(poll_dev->input);
+		decoder->last_stable = state;
+	}
+}
+
+static int gpio_decoder_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct gpio_decoder *decoder;
+	struct input_polled_dev *poll_dev;
+	u32  max;
+	int err;
+
+	decoder = devm_kzalloc(dev, sizeof(struct gpio_decoder), GFP_KERNEL);
+	if (!decoder)
+		return -ENOMEM;
+
+	device_property_read_u32(dev, "linux,axis", &decoder->axis);
+	decoder->input_gpios = devm_gpiod_get_array(dev, NULL, GPIOD_IN);
+	if (IS_ERR(decoder->input_gpios)) {
+		dev_err(dev, "unable to acquire input gpios\n");
+		return PTR_ERR(decoder->input_gpios);
+	}
+	if (decoder->input_gpios->ndescs < 2) {
+		dev_err(dev, "not enough gpios found\n");
+		return -EINVAL;
+	}
+
+	if (device_property_read_u32(dev, "decoder-max-value", &max))
+		max = (1U << decoder->input_gpios->ndescs) - 1;
+
+	decoder->dev = dev;
+	poll_dev = devm_input_allocate_polled_device(decoder->dev);
+	if (!poll_dev)
+		return -ENOMEM;
+
+	poll_dev->private = decoder;
+	poll_dev->poll = gpio_decoder_poll_gpios;
+	decoder->poll_dev = poll_dev;
+
+	poll_dev->input->name = pdev->name;
+	poll_dev->input->id.bustype = BUS_HOST;
+	input_set_abs_params(poll_dev->input, decoder->axis, 0, max, 0, 0);
+
+	err = input_register_polled_device(poll_dev);
+	if (err) {
+		dev_err(dev, "failed to register polled  device\n");
+		return err;
+	}
+	platform_set_drvdata(pdev, decoder);
+
+	return 0;
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id gpio_decoder_of_match[] = {
+	{ .compatible = "gpio-decoder", },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, gpio_decoder_of_match);
+#endif
+
+static struct platform_driver gpio_decoder_driver = {
+	.probe		= gpio_decoder_probe,
+	.driver		= {
+		.name	= "gpio-decoder",
+		.of_match_table = of_match_ptr(gpio_decoder_of_match),
+	}
+};
+module_platform_driver(gpio_decoder_driver);
+
+MODULE_DESCRIPTION("GPIO decoder input driver");
+MODULE_AUTHOR("Vignesh R <vigneshr@ti.com>");
+MODULE_LICENSE("GPL v2");

drivers/input/misc/max77693-haptic.c

@@ -3,7 +3,7 @@
  *
  * Copyright (C) 2014,2015 Samsung Electronics
  * Jaewon Kim <jaewon02.kim@samsung.com>
- * Krzysztof Kozlowski <k.kozlowski@samsung.com>
+ * Krzysztof Kozlowski <krzk@kernel.org>
  *
  * This program is not provided / owned by Maxim Integrated Products.
  *
@@ -426,7 +426,7 @@ static struct platform_driver max77693_haptic_driver = {
 module_platform_driver(max77693_haptic_driver);
 
 MODULE_AUTHOR("Jaewon Kim <jaewon02.kim@samsung.com>");
-MODULE_AUTHOR("Krzysztof Kozlowski <k.kozlowski@samsung.com>");
+MODULE_AUTHOR("Krzysztof Kozlowski <krzk@kernel.org>");
 MODULE_DESCRIPTION("MAXIM 77693/77843 Haptic driver");
 MODULE_ALIAS("platform:max77693-haptic");
 MODULE_LICENSE("GPL");

drivers/input/misc/tps65218-pwrbutton.c

@@ -1,8 +1,9 @@
 /*
- * Texas Instruments' TPS65218 Power Button Input Driver
+ * Texas Instruments' TPS65217 and TPS65218 Power Button Input Driver
  *
  * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/
  * Author: Felipe Balbi <balbi@ti.com>
+ * Author: Marcin Niestroj <m.niestroj@grinn-global.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -18,31 +19,61 @@
 #include <linux/input.h>
 #include <linux/interrupt.h>
 #include <linux/kernel.h>
+#include <linux/mfd/tps65217.h>
 #include <linux/mfd/tps65218.h>
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/platform_device.h>
+#include <linux/regmap.h>
 #include <linux/slab.h>
 
-struct tps65218_pwrbutton {
+struct tps6521x_data {
+	unsigned int reg_status;
+	unsigned int pb_mask;
+	const char *name;
+};
+
+static const struct tps6521x_data tps65217_data = {
+	.reg_status = TPS65217_REG_STATUS,
+	.pb_mask = TPS65217_STATUS_PB,
+	.name = "tps65217_pwrbutton",
+};
+
+static const struct tps6521x_data tps65218_data = {
+	.reg_status = TPS65218_REG_STATUS,
+	.pb_mask = TPS65218_STATUS_PB_STATE,
+	.name = "tps65218_pwrbutton",
+};
+
+struct tps6521x_pwrbutton {
 	struct device *dev;
-	struct tps65218 *tps;
+	struct regmap *regmap;
 	struct input_dev *idev;
+	const struct tps6521x_data *data;
+	char phys[32];
+};
+
+static const struct of_device_id of_tps6521x_pb_match[] = {
+	{ .compatible = "ti,tps65217-pwrbutton", .data = &tps65217_data },
+	{ .compatible = "ti,tps65218-pwrbutton", .data = &tps65218_data },
+	{ },
 };
+MODULE_DEVICE_TABLE(of, of_tps6521x_pb_match);
 
-static irqreturn_t tps65218_pwr_irq(int irq, void *_pwr)
+static irqreturn_t tps6521x_pb_irq(int irq, void *_pwr)
 {
-	struct tps65218_pwrbutton *pwr = _pwr;
+	struct tps6521x_pwrbutton *pwr = _pwr;
+	const struct tps6521x_data *tps_data = pwr->data;
 	unsigned int reg;
 	int error;
 
-	error = tps65218_reg_read(pwr->tps, TPS65218_REG_STATUS, &reg);
+	error = regmap_read(pwr->regmap, tps_data->reg_status, &reg);
 	if (error) {
 		dev_err(pwr->dev, "can't read register: %d\n", error);
 		goto out;
 	}
 
-	if (reg & TPS65218_STATUS_PB_STATE) {
+	if (reg & tps_data->pb_mask) {
 		input_report_key(pwr->idev, KEY_POWER, 1);
 		pm_wakeup_event(pwr->dev, 0);
 	} else {
@@ -55,42 +86,55 @@ out:
 	return IRQ_HANDLED;
 }
 
-static int tps65218_pwron_probe(struct platform_device *pdev)
+static int tps6521x_pb_probe(struct platform_device *pdev)
 {
-	struct tps65218 *tps = dev_get_drvdata(pdev->dev.parent);
 	struct device *dev = &pdev->dev;
-	struct tps65218_pwrbutton *pwr;
+	struct tps6521x_pwrbutton *pwr;
 	struct input_dev *idev;
+	const struct of_device_id *match;
 	int error;
 	int irq;
 
+	match = of_match_node(of_tps6521x_pb_match, pdev->dev.of_node);
+	if (!match)
+		return -ENXIO;
+
 	pwr = devm_kzalloc(dev, sizeof(*pwr), GFP_KERNEL);
 	if (!pwr)
 		return -ENOMEM;
 
+	pwr->data = match->data;
+
 	idev = devm_input_allocate_device(dev);
 	if (!idev)
 		return -ENOMEM;
 
-	idev->name = "tps65218_pwrbutton";
-	idev->phys = "tps65218_pwrbutton/input0";
+	idev->name = pwr->data->name;
+	snprintf(pwr->phys, sizeof(pwr->phys), "%s/input0",
+		pwr->data->name);
+	idev->phys = pwr->phys;
 	idev->dev.parent = dev;
 	idev->id.bustype = BUS_I2C;
 
 	input_set_capability(idev, EV_KEY, KEY_POWER);
 
-	pwr->tps = tps;
+	pwr->regmap = dev_get_regmap(pdev->dev.parent, NULL);
 	pwr->dev = dev;
 	pwr->idev = idev;
 	platform_set_drvdata(pdev, pwr);
 	device_init_wakeup(dev, true);
 
 	irq = platform_get_irq(pdev, 0);
-	error = devm_request_threaded_irq(dev, irq, NULL, tps65218_pwr_irq,
+	if (irq < 0) {
+		dev_err(dev, "No IRQ resource!\n");
+		return -EINVAL;
+	}
+
+	error = devm_request_threaded_irq(dev, irq, NULL, tps6521x_pb_irq,
 					  IRQF_TRIGGER_RISING |
 						IRQF_TRIGGER_FALLING |
 						IRQF_ONESHOT,
-					  "tps65218-pwrbutton", pwr);
+					  pwr->data->name, pwr);
 	if (error) {
 		dev_err(dev, "failed to request IRQ #%d: %d\n",
 			irq, error);
@@ -106,21 +150,15 @@ static int tps65218_pwron_probe(struct platform_device *pdev)
 	return 0;
 }
 
-static const struct of_device_id of_tps65218_pwr_match[] = {
-	{ .compatible = "ti,tps65218-pwrbutton" },
-	{ },
-};
-MODULE_DEVICE_TABLE(of, of_tps65218_pwr_match);
-
-static struct platform_driver tps65218_pwron_driver = {
-	.probe	= tps65218_pwron_probe,
+static struct platform_driver tps6521x_pb_driver = {
+	.probe	= tps6521x_pb_probe,
 	.driver	= {
-		.name	= "tps65218_pwrbutton",
-		.of_match_table = of_tps65218_pwr_match,
+		.name	= "tps6521x_pwrbutton",
+		.of_match_table = of_tps6521x_pb_match,
 	},
 };
-module_platform_driver(tps65218_pwron_driver);
+module_platform_driver(tps6521x_pb_driver);
 
-MODULE_DESCRIPTION("TPS65218 Power Button");
+MODULE_DESCRIPTION("TPS6521X Power Button");
 MODULE_LICENSE("GPL v2");
 MODULE_AUTHOR("Felipe Balbi <balbi@ti.com>");

drivers/input/mouse/elan_i2c_smbus.c

@@ -222,11 +222,13 @@ static int elan_smbus_get_checksum(struct i2c_client *client,
 static int elan_smbus_get_max(struct i2c_client *client,
 			      unsigned int *max_x, unsigned int *max_y)
 {
+	int ret;
 	int error;
 	u8 val[3];
 
-	error = i2c_smbus_read_block_data(client, ETP_SMBUS_RANGE_CMD, val);
-	if (error) {
+	ret = i2c_smbus_read_block_data(client, ETP_SMBUS_RANGE_CMD, val);
+	if (ret != 3) {
+		error = ret < 0 ? ret : -EIO;
 		dev_err(&client->dev, "failed to get dimensions: %d\n", error);
 		return error;
 	}
@@ -240,12 +242,13 @@ static int elan_smbus_get_max(struct i2c_client *client,
 static int elan_smbus_get_resolution(struct i2c_client *client,
 				     u8 *hw_res_x, u8 *hw_res_y)
 {
+	int ret;
 	int error;
 	u8 val[3];
 
-	error = i2c_smbus_read_block_data(client,
-					  ETP_SMBUS_RESOLUTION_CMD, val);
-	if (error) {
+	ret = i2c_smbus_read_block_data(client, ETP_SMBUS_RESOLUTION_CMD, val);
+	if (ret != 3) {
+		error = ret < 0 ? ret : -EIO;
 		dev_err(&client->dev, "failed to get resolution: %d\n", error);
 		return error;
 	}
@@ -260,12 +263,13 @@ static int elan_smbus_get_num_traces(struct i2c_client *client,
 				     unsigned int *x_traces,
 				     unsigned int *y_traces)
 {
+	int ret;
 	int error;
 	u8 val[3];
 
-	error = i2c_smbus_read_block_data(client,
-					  ETP_SMBUS_XY_TRACENUM_CMD, val);
-	if (error) {
+	ret = i2c_smbus_read_block_data(client, ETP_SMBUS_XY_TRACENUM_CMD, val);
+	if (ret != 3) {
+		error = ret < 0 ? ret : -EIO;
 		dev_err(&client->dev, "failed to get trace info: %d\n", error);
 		return error;
 	}

drivers/input/mouse/focaltech.c

@@ -390,7 +390,8 @@ static int focaltech_read_size(struct psmouse *psmouse)
 	return 0;
 }
 
-void focaltech_set_resolution(struct psmouse *psmouse, unsigned int resolution)
+static void focaltech_set_resolution(struct psmouse *psmouse,
+				     unsigned int resolution)
 {
 	/* not supported yet */
 }

drivers/input/mouse/psmouse-base.c

@@ -1916,7 +1916,7 @@ static int __init psmouse_init(void)
 	synaptics_module_init();
 	hgpk_module_init();
 
-	kpsmoused_wq = create_singlethread_workqueue("kpsmoused");
+	kpsmoused_wq = alloc_ordered_workqueue("kpsmoused", 0);
 	if (!kpsmoused_wq) {
 		pr_err("failed to create kpsmoused workqueue\n");
 		return -ENOMEM;

drivers/input/serio/serport.c

@@ -71,10 +71,7 @@ static void serport_serio_close(struct serio *serio)
 
 	spin_lock_irqsave(&serport->lock, flags);
 	clear_bit(SERPORT_ACTIVE, &serport->flags);
-	set_bit(SERPORT_DEAD, &serport->flags);
 	spin_unlock_irqrestore(&serport->lock, flags);
-
-	wake_up_interruptible(&serport->wait);
 }
 
 /*
@@ -248,6 +245,19 @@ static long serport_ldisc_compat_ioctl(struct tty_struct *tty,
 }
 #endif
 
+static int serport_ldisc_hangup(struct tty_struct *tty)
+{
+	struct serport *serport = (struct serport *) tty->disc_data;
+	unsigned long flags;
+
+	spin_lock_irqsave(&serport->lock, flags);
+	set_bit(SERPORT_DEAD, &serport->flags);
+	spin_unlock_irqrestore(&serport->lock, flags);
+
+	wake_up_interruptible(&serport->wait);
+	return 0;
+}
+
 static void serport_ldisc_write_wakeup(struct tty_struct * tty)
 {
 	struct serport *serport = (struct serport *) tty->disc_data;
@@ -274,6 +284,7 @@ static struct tty_ldisc_ops serport_ldisc = {
 	.compat_ioctl =	serport_ldisc_compat_ioctl,
 #endif
 	.receive_buf =	serport_ldisc_receive,
+	.hangup =	serport_ldisc_hangup,
 	.write_wakeup =	serport_ldisc_write_wakeup
 };
 

drivers/input/tablet/pegasus_notetaker.c

@@ -40,6 +40,7 @@
 #include <linux/input.h>
 #include <linux/usb/input.h>
 #include <linux/slab.h>
+#include <linux/workqueue.h>
 
 /* USB HID defines */
 #define USB_REQ_GET_REPORT		0x01

drivers/input/touchscreen/Kconfig

@@ -305,19 +305,6 @@ config TOUCHSCREEN_EGALAX_SERIAL
 	  To compile this driver as a module, choose M here: the
 	  module will be called egalax_ts_serial.
 
-config TOUCHSCREEN_FT6236
-	tristate "FT6236 I2C touchscreen"
-	depends on I2C
-	depends on GPIOLIB || COMPILE_TEST
-	help
-	  Say Y here to enable support for the I2C connected FT6x06 and
-	  FT6x36 family of capacitive touchscreen drivers.
-
-	  If unsure, say N.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called ft6236.
-
 config TOUCHSCREEN_FUJITSU
 	tristate "Fujitsu serial touchscreen"
 	select SERIO
@@ -397,6 +384,18 @@ config TOUCHSCREEN_GUNZE
 	  To compile this driver as a module, choose M here: the
 	  module will be called gunze.
 
+config TOUCHSCREEN_EKTF2127
+	tristate "Elan eKTF2127 I2C touchscreen"
+	depends on I2C
+	help
+	  Say Y here if you have an Elan eKTF2127 touchscreen
+	  connected to your system.
+
+	  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called ektf2127.
+
 config TOUCHSCREEN_ELAN
 	tristate "Elan eKTH I2C touchscreen"
 	depends on I2C

drivers/input/touchscreen/Makefile

@@ -32,11 +32,11 @@ obj-$(CONFIG_TOUCHSCREEN_EDT_FT5X06)	+= edt-ft5x06.o
 obj-$(CONFIG_TOUCHSCREEN_HAMPSHIRE)	+= hampshire.o
 obj-$(CONFIG_TOUCHSCREEN_GUNZE)		+= gunze.o
 obj-$(CONFIG_TOUCHSCREEN_EETI)		+= eeti_ts.o
+obj-$(CONFIG_TOUCHSCREEN_EKTF2127)	+= ektf2127.o
 obj-$(CONFIG_TOUCHSCREEN_ELAN)		+= elants_i2c.o
 obj-$(CONFIG_TOUCHSCREEN_ELO)		+= elo.o
 obj-$(CONFIG_TOUCHSCREEN_EGALAX)	+= egalax_ts.o
 obj-$(CONFIG_TOUCHSCREEN_EGALAX_SERIAL)	+= egalax_ts_serial.o
-obj-$(CONFIG_TOUCHSCREEN_FT6236)	+= ft6236.o
 obj-$(CONFIG_TOUCHSCREEN_FUJITSU)	+= fujitsu_ts.o
 obj-$(CONFIG_TOUCHSCREEN_GOODIX)	+= goodix.o
 obj-$(CONFIG_TOUCHSCREEN_ILI210X)	+= ili210x.o

drivers/input/touchscreen/edt-ft5x06.c

@@ -1063,9 +1063,15 @@ static const struct edt_i2c_chip_data edt_ft5506_data = {
 	.max_support_points = 10,
 };
 
+static const struct edt_i2c_chip_data edt_ft6236_data = {
+	.max_support_points = 2,
+};
+
 static const struct i2c_device_id edt_ft5x06_ts_id[] = {
 	{ .name = "edt-ft5x06", .driver_data = (long)&edt_ft5x06_data },
 	{ .name = "edt-ft5506", .driver_data = (long)&edt_ft5506_data },
+	/* Note no edt- prefix for compatibility with the ft6236.c driver */
+	{ .name = "ft6236", .driver_data = (long)&edt_ft6236_data },
 	{ /* sentinel */ }
 };
 MODULE_DEVICE_TABLE(i2c, edt_ft5x06_ts_id);
@@ -1076,6 +1082,8 @@ static const struct of_device_id edt_ft5x06_of_match[] = {
 	{ .compatible = "edt,edt-ft5306", .data = &edt_ft5x06_data },
 	{ .compatible = "edt,edt-ft5406", .data = &edt_ft5x06_data },
 	{ .compatible = "edt,edt-ft5506", .data = &edt_ft5506_data },
+	/* Note focaltech vendor prefix for compatibility with ft6236.c */
+	{ .compatible = "focaltech,ft6236", .data = &edt_ft6236_data },
 	{ /* sentinel */ }
 };
 MODULE_DEVICE_TABLE(of, edt_ft5x06_of_match);

drivers/input/touchscreen/ektf2127.c

@@ -0,0 +1,336 @@
+/*
+ * Driver for ELAN eKTF2127 i2c touchscreen controller
+ *
+ * For this driver the layout of the Chipone icn8318 i2c
+ * touchscreencontroller is used.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * Author:
+ * Michel Verlaan <michel.verl@gmail.com>
+ * Siebren Vroegindeweij <siebren.vroegindeweij@hotmail.com>
+ *
+ * Original chipone_icn8318 driver:
+ * Hans de Goede <hdegoede@redhat.com>
+ */
+
+#include <linux/gpio/consumer.h>
+#include <linux/interrupt.h>
+#include <linux/i2c.h>
+#include <linux/input.h>
+#include <linux/input/mt.h>
+#include <linux/input/touchscreen.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/delay.h>
+
+/* Packet header defines (first byte of data send / received) */
+#define EKTF2127_NOISE			0x40
+#define EKTF2127_RESPONSE		0x52
+#define EKTF2127_REQUEST		0x53
+#define EKTF2127_HELLO			0x55
+#define EKTF2127_REPORT			0x5d
+#define EKTF2127_CALIB_DONE		0x66
+
+/* Register defines (second byte of data send / received) */
+#define EKTF2127_ENV_NOISY		0x41
+#define EKTF2127_HEIGHT			0x60
+#define EKTF2127_WIDTH			0x63
+
+/* 2 bytes header + 5 * 3 bytes coordinates + 3 bytes pressure info + footer */
+#define EKTF2127_TOUCH_REPORT_SIZE	21
+#define EKTF2127_MAX_TOUCHES		5
+
+struct ektf2127_ts {
+	struct i2c_client *client;
+	struct input_dev *input;
+	struct gpio_desc *power_gpios;
+	struct touchscreen_properties prop;
+};
+
+static void ektf2127_parse_coordinates(const u8* buf, unsigned int touch_count,
+				       struct input_mt_pos *touches)
+{
+	int index = 0;
+	int i;
+
+	for (i = 0; i < touch_count; i++) {
+		index = 2 + i * 3;
+
+		touches[i].x = (buf[index] & 0x0f);
+		touches[i].x <<= 8;
+		touches[i].x |= buf[index + 2];
+
+		touches[i].y = (buf[index] & 0xf0);
+		touches[i].y <<= 4;
+		touches[i].y |= buf[index + 1];
+	}
+}
+
+static void ektf2127_report_event(struct ektf2127_ts *ts, const u8 *buf)
+{
+	struct input_mt_pos touches[EKTF2127_MAX_TOUCHES];
+	int slots[EKTF2127_MAX_TOUCHES];
+	unsigned int touch_count, i;
+
+	touch_count = buf[1] & 0x07;
+	if (touch_count > EKTF2127_MAX_TOUCHES) {
+		dev_err(&ts->client->dev,
+			"Too many touches %d > %d\n",
+			touch_count, EKTF2127_MAX_TOUCHES);
+		touch_count = EKTF2127_MAX_TOUCHES;
+	}
+
+	ektf2127_parse_coordinates(buf, touch_count, touches);
+	input_mt_assign_slots(ts->input, slots, touches,
+			      touch_count, 0);
+
+	for (i = 0; i < touch_count; i++) {
+		input_mt_slot(ts->input, slots[i]);
+		input_mt_report_slot_state(ts->input, MT_TOOL_FINGER, true);
+		touchscreen_report_pos(ts->input, &ts->prop,
+				       touches[i].x, touches[i].y, true);
+	}
+
+	input_mt_sync_frame(ts->input);
+	input_sync(ts->input);
+}
+
+static irqreturn_t ektf2127_irq(int irq, void *dev_id)
+{
+	struct ektf2127_ts *ts = dev_id;
+	struct device *dev = &ts->client->dev;
+	char buf[EKTF2127_TOUCH_REPORT_SIZE];
+	int ret;
+
+	ret = i2c_master_recv(ts->client, buf, EKTF2127_TOUCH_REPORT_SIZE);
+	if (ret != EKTF2127_TOUCH_REPORT_SIZE) {
+		dev_err(dev, "Error reading touch data: %d\n", ret);
+		goto out;
+	}
+
+	switch (buf[0]) {
+	case EKTF2127_REPORT:
+		ektf2127_report_event(ts, buf);
+		break;
+
+	case EKTF2127_NOISE:
+		if (buf[1] == EKTF2127_ENV_NOISY)
+			dev_dbg(dev, "Environment is electrically noisy\n");
+		break;
+
+	case EKTF2127_HELLO:
+	case EKTF2127_CALIB_DONE:
+		break;
+
+	default:
+		dev_err(dev, "Unexpected packet header byte %#02x\n", buf[0]);
+		break;
+	}
+
+out:
+	return IRQ_HANDLED;
+}
+
+static int ektf2127_start(struct input_dev *dev)
+{
+	struct ektf2127_ts *ts = input_get_drvdata(dev);
+
+	enable_irq(ts->client->irq);
+	gpiod_set_value_cansleep(ts->power_gpios, 1);
+
+	return 0;
+}
+
+static void ektf2127_stop(struct input_dev *dev)
+{
+	struct ektf2127_ts *ts = input_get_drvdata(dev);
+
+	disable_irq(ts->client->irq);
+	gpiod_set_value_cansleep(ts->power_gpios, 0);
+}
+
+static int __maybe_unused ektf2127_suspend(struct device *dev)
+{
+	struct ektf2127_ts *ts = i2c_get_clientdata(to_i2c_client(dev));
+
+	mutex_lock(&ts->input->mutex);
+	if (ts->input->users)
+		ektf2127_stop(ts->input);
+	mutex_unlock(&ts->input->mutex);
+
+	return 0;
+}
+
+static int __maybe_unused ektf2127_resume(struct device *dev)
+{
+	struct ektf2127_ts *ts = i2c_get_clientdata(to_i2c_client(dev));
+
+	mutex_lock(&ts->input->mutex);
+	if (ts->input->users)
+		ektf2127_start(ts->input);
+	mutex_unlock(&ts->input->mutex);
+
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(ektf2127_pm_ops, ektf2127_suspend,
+			 ektf2127_resume);
+
+static int ektf2127_query_dimension(struct i2c_client *client, bool width)
+{
+	struct device *dev = &client->dev;
+	const char *what = width ? "width" : "height";
+	u8 what_code = width ? EKTF2127_WIDTH : EKTF2127_HEIGHT;
+	u8 buf[4];
+	int ret;
+	int error;
+
+	/* Request dimension */
+	buf[0] = EKTF2127_REQUEST;
+	buf[1] = width ? EKTF2127_WIDTH : EKTF2127_HEIGHT;
+	buf[2] = 0x00;
+	buf[3] = 0x00;
+	ret = i2c_master_send(client, buf, sizeof(buf));
+	if (ret != sizeof(buf)) {
+		error = ret < 0 ? ret : -EIO;
+		dev_err(dev, "Failed to request %s: %d\n", what, error);
+		return error;
+	}
+
+	msleep(20);
+
+	/* Read response */
+	ret = i2c_master_recv(client, buf, sizeof(buf));
+	if (ret != sizeof(buf)) {
+		error = ret < 0 ? ret : -EIO;
+		dev_err(dev, "Failed to receive %s data: %d\n", what, error);
+		return error;
+	}
+
+	if (buf[0] != EKTF2127_RESPONSE || buf[1] != what_code) {
+		dev_err(dev, "Unexpected %s data: %#02x %#02x\n",
+			what, buf[0], buf[1]);
+		return -EIO;
+	}
+
+	return (((buf[3] & 0xf0) << 4) | buf[2]) - 1;
+}
+
+static int ektf2127_probe(struct i2c_client *client,
+			  const struct i2c_device_id *id)
+{
+	struct device *dev = &client->dev;
+	struct ektf2127_ts *ts;
+	struct input_dev *input;
+	u8 buf[4];
+	int max_x, max_y;
+	int error;
+
+	if (!client->irq) {
+		dev_err(dev, "Error no irq specified\n");
+		return -EINVAL;
+	}
+
+	ts = devm_kzalloc(dev, sizeof(*ts), GFP_KERNEL);
+	if (!ts)
+		return -ENOMEM;
+
+	/* This requests the gpio *and* turns on the touchscreen controller */
+	ts->power_gpios = devm_gpiod_get(dev, "power", GPIOD_OUT_HIGH);
+	if (IS_ERR(ts->power_gpios)) {
+		error = PTR_ERR(ts->power_gpios);
+		if (error != -EPROBE_DEFER)
+			dev_err(dev, "Error getting power gpio: %d\n", error);
+		return error;
+	}
+
+	input = devm_input_allocate_device(dev);
+	if (!input)
+		return -ENOMEM;
+
+	input->name = client->name;
+	input->id.bustype = BUS_I2C;
+	input->open = ektf2127_start;
+	input->close = ektf2127_stop;
+
+	ts->client = client;
+
+	/* Read hello (ignore result, depends on initial power state) */
+	msleep(20);
+	i2c_master_recv(ts->client, buf, sizeof(buf));
+
+	/* Read resolution from chip */
+	max_x = ektf2127_query_dimension(client, true);
+	if (max_x < 0)
+		return max_x;
+
+	max_y = ektf2127_query_dimension(client, false);
+	if (max_y < 0)
+		return max_y;
+
+	input_set_abs_params(input, ABS_MT_POSITION_X, 0, max_x, 0, 0);
+	input_set_abs_params(input, ABS_MT_POSITION_Y, 0, max_y, 0, 0);
+	touchscreen_parse_properties(input, true, &ts->prop);
+
+	error = input_mt_init_slots(input, EKTF2127_MAX_TOUCHES,
+				    INPUT_MT_DIRECT |
+					INPUT_MT_DROP_UNUSED |
+					INPUT_MT_TRACK);
+	if (error)
+		return error;
+
+	ts->input = input;
+	input_set_drvdata(input, ts);
+
+	error = devm_request_threaded_irq(dev, client->irq,
+					  NULL, ektf2127_irq,
+					  IRQF_ONESHOT, client->name, ts);
+	if (error) {
+		dev_err(dev, "Error requesting irq: %d\n", error);
+		return error;
+	}
+
+	/* Stop device till opened */
+	ektf2127_stop(ts->input);
+
+	error = input_register_device(input);
+	if (error)
+		return error;
+
+	i2c_set_clientdata(client, ts);
+
+	return 0;
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id ektf2127_of_match[] = {
+	{ .compatible = "elan,ektf2127" },
+	{}
+};
+MODULE_DEVICE_TABLE(of, ektf2127_of_match);
+#endif
+
+static const struct i2c_device_id ektf2127_i2c_id[] = {
+	{ "ektf2127", 0 },
+	{}
+};
+MODULE_DEVICE_TABLE(i2c, ektf2127_i2c_id);
+
+static struct i2c_driver ektf2127_driver = {
+	.driver = {
+		.name	= "elan_ektf2127",
+		.pm	= &ektf2127_pm_ops,
+		.of_match_table = of_match_ptr(ektf2127_of_match),
+	},
+	.probe = ektf2127_probe,
+	.id_table = ektf2127_i2c_id,
+};
+module_i2c_driver(ektf2127_driver);
+
+MODULE_DESCRIPTION("ELAN eKTF2127 I2C Touchscreen Driver");
+MODULE_AUTHOR("Michel Verlaan, Siebren Vroegindeweij");
+MODULE_LICENSE("GPL");

drivers/input/touchscreen/elants_i2c.c

@@ -298,7 +298,7 @@ static u16 elants_i2c_parse_version(u8 *buf)
 	return get_unaligned_be32(buf) >> 4;
 }
 
-static int elants_i2c_query_fw_id(struct elants_data *ts)
+static int elants_i2c_query_hw_version(struct elants_data *ts)
 {
 	struct i2c_client *client = ts->client;
 	int error, retry_cnt;
@@ -318,8 +318,13 @@ static int elants_i2c_query_fw_id(struct elants_data *ts)
 			error, (int)sizeof(resp), resp);
 	}
 
-	dev_err(&client->dev,
-		"Failed to read fw id or fw id is invalid\n");
+	if (error) {
+		dev_err(&client->dev,
+			"Failed to read fw id: %d\n", error);
+		return error;
+	}
+
+	dev_err(&client->dev, "Invalid fw id: %#04x\n", ts->hw_version);
 
 	return -EINVAL;
 }
@@ -508,7 +513,7 @@ static int elants_i2c_fastboot(struct i2c_client *client)
 static int elants_i2c_initialize(struct elants_data *ts)
 {
 	struct i2c_client *client = ts->client;
-	int error, retry_cnt;
+	int error, error2, retry_cnt;
 	const u8 hello_packet[] = { 0x55, 0x55, 0x55, 0x55 };
 	const u8 recov_packet[] = { 0x55, 0x55, 0x80, 0x80 };
 	u8 buf[HEADER_SIZE];
@@ -553,18 +558,22 @@ static int elants_i2c_initialize(struct elants_data *ts)
 		}
 	}
 
+	/* hw version is available even if device in recovery state */
+	error2 = elants_i2c_query_hw_version(ts);
 	if (!error)
-		error = elants_i2c_query_fw_id(ts);
+		error = error2;
+
 	if (!error)
 		error = elants_i2c_query_fw_version(ts);
+	if (!error)
+		error = elants_i2c_query_test_version(ts);
+	if (!error)
+		error = elants_i2c_query_bc_version(ts);
+	if (!error)
+		error = elants_i2c_query_ts_info(ts);
 
-	if (error) {
+	if (error)
 		ts->iap_mode = ELAN_IAP_RECOVERY;
-	} else {
-		elants_i2c_query_test_version(ts);
-		elants_i2c_query_bc_version(ts);
-		elants_i2c_query_ts_info(ts);
-	}
 
 	return 0;
 }

drivers/input/touchscreen/ft6236.c

@@ -1,326 +0,0 @@
-/*
- * FocalTech FT6236 TouchScreen driver.
- *
- * Copyright (c) 2010  Focal tech Ltd.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/delay.h>
-#include <linux/gpio/consumer.h>
-#include <linux/i2c.h>
-#include <linux/input.h>
-#include <linux/input/mt.h>
-#include <linux/interrupt.h>
-#include <linux/module.h>
-#include <linux/property.h>
-
-#define FT6236_MAX_TOUCH_POINTS		2
-
-#define FT6236_REG_TH_GROUP		0x80
-#define FT6236_REG_PERIODACTIVE		0x88
-#define FT6236_REG_LIB_VER_H		0xa1
-#define FT6236_REG_LIB_VER_L		0xa2
-#define FT6236_REG_CIPHER		0xa3
-#define FT6236_REG_FIRMID		0xa6
-#define FT6236_REG_FOCALTECH_ID		0xa8
-#define FT6236_REG_RELEASE_CODE_ID	0xaf
-
-#define FT6236_EVENT_PRESS_DOWN		0
-#define FT6236_EVENT_LIFT_UP		1
-#define FT6236_EVENT_CONTACT		2
-#define FT6236_EVENT_NO_EVENT		3
-
-struct ft6236_data {
-	struct i2c_client *client;
-	struct input_dev *input;
-	struct gpio_desc *reset_gpio;
-	u32 max_x;
-	u32 max_y;
-	bool invert_x;
-	bool invert_y;
-	bool swap_xy;
-};
-
-/*
- * This struct is a touchpoint as stored in hardware.  Note that the id,
- * as well as the event, are stored in the upper nybble of the hi byte.
- */
-struct ft6236_touchpoint {
-	union {
-		u8 xhi;
-		u8 event;
-	};
-	u8 xlo;
-	union {
-		u8 yhi;
-		u8 id;
-	};
-	u8 ylo;
-	u8 weight;
-	u8 misc;
-} __packed;
-
-/* This packet represents the register map as read from offset 0 */
-struct ft6236_packet {
-	u8 dev_mode;
-	u8 gest_id;
-	u8 touches;
-	struct ft6236_touchpoint points[FT6236_MAX_TOUCH_POINTS];
-} __packed;
-
-static int ft6236_read(struct i2c_client *client, u8 reg, u8 len, void *data)
-{
-	int error;
-
-	error = i2c_smbus_read_i2c_block_data(client, reg, len, data);
-	if (error < 0)
-		return error;
-
-	if (error != len)
-		return -EIO;
-
-	return 0;
-}
-
-static irqreturn_t ft6236_interrupt(int irq, void *dev_id)
-{
-	struct ft6236_data *ft6236 = dev_id;
-	struct device *dev = &ft6236->client->dev;
-	struct input_dev *input = ft6236->input;
-	struct ft6236_packet buf;
-	u8 touches;
-	int i, error;
-
-	error = ft6236_read(ft6236->client, 0, sizeof(buf), &buf);
-	if (error) {
-		dev_err(dev, "read touchdata failed %d\n", error);
-		return IRQ_HANDLED;
-	}
-
-	touches = buf.touches & 0xf;
-	if (touches > FT6236_MAX_TOUCH_POINTS) {
-		dev_dbg(dev,
-			"%d touch points reported, only %d are supported\n",
-			touches, FT6236_MAX_TOUCH_POINTS);
-		touches = FT6236_MAX_TOUCH_POINTS;
-	}
-
-	for (i = 0; i < touches; i++) {
-		struct ft6236_touchpoint *point = &buf.points[i];
-		u16 x = ((point->xhi & 0xf) << 8) | buf.points[i].xlo;
-		u16 y = ((point->yhi & 0xf) << 8) | buf.points[i].ylo;
-		u8 event = point->event >> 6;
-		u8 id = point->id >> 4;
-		bool act = (event == FT6236_EVENT_PRESS_DOWN ||
-			    event == FT6236_EVENT_CONTACT);
-
-		input_mt_slot(input, id);
-		input_mt_report_slot_state(input, MT_TOOL_FINGER, act);
-		if (!act)
-			continue;
-
-		if (ft6236->invert_x)
-			x = ft6236->max_x - x;
-
-		if (ft6236->invert_y)
-			y = ft6236->max_y - y;
-
-		if (ft6236->swap_xy) {
-			input_report_abs(input, ABS_MT_POSITION_X, y);
-			input_report_abs(input, ABS_MT_POSITION_Y, x);
-		} else {
-			input_report_abs(input, ABS_MT_POSITION_X, x);
-			input_report_abs(input, ABS_MT_POSITION_Y, y);
-		}
-	}
-
-	input_mt_sync_frame(input);
-	input_sync(input);
-
-	return IRQ_HANDLED;
-}
-
-static u8 ft6236_debug_read_byte(struct ft6236_data *ft6236, u8 reg)
-{
-	struct i2c_client *client = ft6236->client;
-	u8 val = 0;
-	int error;
-
-	error = ft6236_read(client, reg, 1, &val);
-	if (error)
-		dev_dbg(&client->dev,
-			"error reading register 0x%02x: %d\n", reg, error);
-
-	return val;
-}
-
-static void ft6236_debug_info(struct ft6236_data *ft6236)
-{
-	struct device *dev = &ft6236->client->dev;
-
-	dev_dbg(dev, "Touch threshold is %d\n",
-		ft6236_debug_read_byte(ft6236, FT6236_REG_TH_GROUP) * 4);
-	dev_dbg(dev, "Report rate is %dHz\n",
-		ft6236_debug_read_byte(ft6236, FT6236_REG_PERIODACTIVE) * 10);
-	dev_dbg(dev, "Firmware library version 0x%02x%02x\n",
-		ft6236_debug_read_byte(ft6236, FT6236_REG_LIB_VER_H),
-		ft6236_debug_read_byte(ft6236, FT6236_REG_LIB_VER_L));
-	dev_dbg(dev, "Firmware version 0x%02x\n",
-		ft6236_debug_read_byte(ft6236, FT6236_REG_FIRMID));
-	dev_dbg(dev, "Chip vendor ID 0x%02x\n",
-		ft6236_debug_read_byte(ft6236, FT6236_REG_CIPHER));
-	dev_dbg(dev, "CTPM vendor ID 0x%02x\n",
-		ft6236_debug_read_byte(ft6236, FT6236_REG_FOCALTECH_ID));
-	dev_dbg(dev, "Release code version 0x%02x\n",
-		ft6236_debug_read_byte(ft6236, FT6236_REG_RELEASE_CODE_ID));
-}
-
-static void ft6236_reset(struct ft6236_data *ft6236)
-{
-	if (!ft6236->reset_gpio)
-		return;
-
-	gpiod_set_value_cansleep(ft6236->reset_gpio, 1);
-	usleep_range(5000, 20000);
-	gpiod_set_value_cansleep(ft6236->reset_gpio, 0);
-	msleep(300);
-}
-
-static int ft6236_probe(struct i2c_client *client,
-			const struct i2c_device_id *id)
-{
-	struct device *dev = &client->dev;
-	struct ft6236_data *ft6236;
-	struct input_dev *input;
-	u32 fuzz_x = 0, fuzz_y = 0;
-	u8 val;
-	int error;
-
-	if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C))
-		return -ENXIO;
-
-	if (!client->irq) {
-		dev_err(dev, "irq is missing\n");
-		return -EINVAL;
-	}
-
-	ft6236 = devm_kzalloc(dev, sizeof(*ft6236), GFP_KERNEL);
-	if (!ft6236)
-		return -ENOMEM;
-
-	ft6236->client = client;
-	ft6236->reset_gpio = devm_gpiod_get_optional(dev, "reset",
-						     GPIOD_OUT_LOW);
-	if (IS_ERR(ft6236->reset_gpio)) {
-		error = PTR_ERR(ft6236->reset_gpio);
-		if (error != -EPROBE_DEFER)
-			dev_err(dev, "error getting reset gpio: %d\n", error);
-		return error;
-	}
-
-	ft6236_reset(ft6236);
-
-	/* verify that the controller is present */
-	error = ft6236_read(client, 0x00, 1, &val);
-	if (error) {
-		dev_err(dev, "failed to read from controller: %d\n", error);
-		return error;
-	}
-
-	ft6236_debug_info(ft6236);
-
-	input = devm_input_allocate_device(dev);
-	if (!input)
-		return -ENOMEM;
-
-	ft6236->input = input;
-	input->name = client->name;
-	input->id.bustype = BUS_I2C;
-
-	if (device_property_read_u32(dev, "touchscreen-size-x",
-				     &ft6236->max_x) ||
-	    device_property_read_u32(dev, "touchscreen-size-y",
-				     &ft6236->max_y)) {
-		dev_err(dev, "touchscreen-size-x and/or -y missing\n");
-		return -EINVAL;
-	}
-
-	device_property_read_u32(dev, "touchscreen-fuzz-x", &fuzz_x);
-	device_property_read_u32(dev, "touchscreen-fuzz-y", &fuzz_y);
-	ft6236->invert_x = device_property_read_bool(dev,
-						     "touchscreen-inverted-x");
-	ft6236->invert_y = device_property_read_bool(dev,
-						     "touchscreen-inverted-y");
-	ft6236->swap_xy = device_property_read_bool(dev,
-						    "touchscreen-swapped-x-y");
-
-	if (ft6236->swap_xy) {
-		input_set_abs_params(input, ABS_MT_POSITION_X, 0,
-				     ft6236->max_y, fuzz_y, 0);
-		input_set_abs_params(input, ABS_MT_POSITION_Y, 0,
-				     ft6236->max_x, fuzz_x, 0);
-	} else {
-		input_set_abs_params(input, ABS_MT_POSITION_X, 0,
-				     ft6236->max_x, fuzz_x, 0);
-		input_set_abs_params(input, ABS_MT_POSITION_Y, 0,
-				     ft6236->max_y, fuzz_y, 0);
-	}
-
-	error = input_mt_init_slots(input, FT6236_MAX_TOUCH_POINTS,
-				    INPUT_MT_DIRECT | INPUT_MT_DROP_UNUSED);
-	if (error)
-		return error;
-
-	error = devm_request_threaded_irq(dev, client->irq, NULL,
-					  ft6236_interrupt, IRQF_ONESHOT,
-					  client->name, ft6236);
-	if (error) {
-		dev_err(dev, "request irq %d failed: %d\n", client->irq, error);
-		return error;
-	}
-
-	error = input_register_device(input);
-	if (error) {
-		dev_err(dev, "failed to register input device: %d\n", error);
-		return error;
-	}
-
-	return 0;
-}
-
-#ifdef CONFIG_OF
-static const struct of_device_id ft6236_of_match[] = {
-	{ .compatible = "focaltech,ft6236", },
-	{ }
-};
-MODULE_DEVICE_TABLE(of, ft6236_of_match);
-#endif
-
-static const struct i2c_device_id ft6236_id[] = {
-	{ "ft6236", },
-	{ }
-};
-MODULE_DEVICE_TABLE(i2c, ft6236_id);
-
-static struct i2c_driver ft6236_driver = {
-	.driver = {
-		.name = "ft6236",
-		.of_match_table = of_match_ptr(ft6236_of_match),
-	},
-	.probe = ft6236_probe,
-	.id_table = ft6236_id,
-};
-module_i2c_driver(ft6236_driver);
-
-MODULE_AUTHOR("Sean Cross <xobs@kosagi.com>");
-MODULE_AUTHOR("Noralf Trønnes <noralf@tronnes.org>");
-MODULE_DESCRIPTION("FocalTech FT6236 TouchScreen driver");
-MODULE_LICENSE("GPL v2");

drivers/input/touchscreen/jornada720_ts.c

@@ -13,6 +13,7 @@
  * HP Jornada 710/720/729 Touchscreen Driver
  */
 
+#include <linux/gpio/consumer.h>
 #include <linux/platform_device.h>
 #include <linux/input.h>
 #include <linux/interrupt.h>
@@ -20,9 +21,7 @@
 #include <linux/slab.h>
 #include <linux/io.h>
 
-#include <mach/hardware.h>
 #include <mach/jornada720.h>
-#include <mach/irqs.h>
 
 MODULE_AUTHOR("Kristoffer Ericson <kristoffer.ericson@gmail.com>");
 MODULE_DESCRIPTION("HP Jornada 710/720/728 touchscreen driver");
@@ -30,6 +29,7 @@ MODULE_LICENSE("GPL v2");
 
 struct jornada_ts {
 	struct input_dev *dev;
+	struct gpio_desc *gpio;
 	int x_data[4];		/* X sample values */
 	int y_data[4];		/* Y sample values */
 };
@@ -71,8 +71,8 @@ static irqreturn_t jornada720_ts_interrupt(int irq, void *dev_id)
 	struct input_dev *input = jornada_ts->dev;
 	int x, y;
 
-	/* If GPIO_GPIO9 is set to high then report pen up */
-	if (GPLR & GPIO_GPIO(9)) {
+	/* If gpio is high then report pen up */
+	if (gpiod_get_value(jornada_ts->gpio)) {
 		input_report_key(input, BTN_TOUCH, 0);
 		input_sync(input);
 	} else {
@@ -101,7 +101,7 @@ static int jornada720_ts_probe(struct platform_device *pdev)
 {
 	struct jornada_ts *jornada_ts;
 	struct input_dev *input_dev;
-	int error;
+	int error, irq;
 
 	jornada_ts = devm_kzalloc(&pdev->dev, sizeof(*jornada_ts), GFP_KERNEL);
 	if (!jornada_ts)
@@ -113,6 +113,14 @@ static int jornada720_ts_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, jornada_ts);
 
+	jornada_ts->gpio = devm_gpiod_get(&pdev->dev, "penup", GPIOD_IN);
+	if (IS_ERR(jornada_ts->gpio))
+		return PTR_ERR(jornada_ts->gpio);
+
+	irq = gpiod_to_irq(jornada_ts->gpio);
+	if (irq <= 0)
+		return irq < 0 ? irq : -EINVAL;
+
 	jornada_ts->dev = input_dev;
 
 	input_dev->name = "HP Jornada 7xx Touchscreen";
@@ -125,8 +133,7 @@ static int jornada720_ts_probe(struct platform_device *pdev)
 	input_set_abs_params(input_dev, ABS_X, 270, 3900, 0, 0);
 	input_set_abs_params(input_dev, ABS_Y, 180, 3700, 0, 0);
 
-	error = devm_request_irq(&pdev->dev, IRQ_GPIO9,
-				 jornada720_ts_interrupt,
+	error = devm_request_irq(&pdev->dev, irq, jornada720_ts_interrupt,
 				 IRQF_TRIGGER_RISING,
 				 "HP7XX Touchscreen driver", pdev);
 	if (error) {

drivers/input/touchscreen/mc13783_ts.c

@@ -37,7 +37,6 @@ struct mc13783_ts_priv {
 	struct input_dev *idev;
 	struct mc13xxx *mc13xxx;
 	struct delayed_work work;
-	struct workqueue_struct *workq;
 	unsigned int sample[4];
 	struct mc13xxx_ts_platform_data *touch;
 };
@@ -54,7 +53,7 @@ static irqreturn_t mc13783_ts_handler(int irq, void *data)
 	 * be rescheduled for immediate execution here. However the rearm
 	 * delay is HZ / 50 which is acceptable.
 	 */
-	queue_delayed_work(priv->workq, &priv->work, 0);
+	schedule_delayed_work(&priv->work, 0);
 
 	return IRQ_HANDLED;
 }
@@ -106,16 +105,18 @@ static void mc13783_ts_report_sample(struct mc13783_ts_priv *priv)
 
 			dev_dbg(&idev->dev, "report (%d, %d, %d)\n",
 					x1, y1, 0x1000 - cr0);
-			queue_delayed_work(priv->workq, &priv->work, HZ / 50);
-		} else
+			schedule_delayed_work(&priv->work, HZ / 50);
+		} else {
 			dev_dbg(&idev->dev, "report release\n");
+		}
 
 		input_report_abs(idev, ABS_PRESSURE,
 				cr0 ? 0x1000 - cr0 : cr0);
 		input_report_key(idev, BTN_TOUCH, cr0);
 		input_sync(idev);
-	} else
+	} else {
 		dev_dbg(&idev->dev, "discard event\n");
+	}
 }
 
 static void mc13783_ts_work(struct work_struct *work)
@@ -189,14 +190,6 @@ static int __init mc13783_ts_probe(struct platform_device *pdev)
 		goto err_free_mem;
 	}
 
-	/*
-	 * We need separate workqueue because mc13783_adc_do_conversion
-	 * uses keventd and thus would deadlock.
-	 */
-	priv->workq = create_singlethread_workqueue("mc13783_ts");
-	if (!priv->workq)
-		goto err_free_mem;
-
 	idev->name = MC13783_TS_NAME;
 	idev->dev.parent = &pdev->dev;
 
@@ -215,14 +208,12 @@ static int __init mc13783_ts_probe(struct platform_device *pdev)
 	if (ret) {
 		dev_err(&pdev->dev,
 			"register input device failed with %d\n", ret);
-		goto err_destroy_wq;
+		goto err_free_mem;
 	}
 
 	platform_set_drvdata(pdev, priv);
 	return 0;
 
-err_destroy_wq:
-	destroy_workqueue(priv->workq);
 err_free_mem:
 	input_free_device(idev);
 	kfree(priv);
@@ -233,7 +224,6 @@ static int mc13783_ts_remove(struct platform_device *pdev)
 {
 	struct mc13783_ts_priv *priv = platform_get_drvdata(pdev);
 
-	destroy_workqueue(priv->workq);
 	input_unregister_device(priv->idev);
 	kfree(priv);
 

drivers/input/touchscreen/pixcir_i2c_ts.c

@@ -11,10 +11,6 @@
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public
- * License along with this library; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
  */
 
 #include <linux/delay.h>
@@ -404,7 +400,6 @@ static int __maybe_unused pixcir_i2c_ts_resume(struct device *dev)
 	mutex_lock(&input->mutex);
 
 	if (device_may_wakeup(&client->dev)) {
-
 		if (!input->users) {
 			ret = pixcir_stop(ts);
 			if (ret) {
@@ -431,13 +426,7 @@ static const struct of_device_id pixcir_of_match[];
 static int pixcir_parse_dt(struct device *dev,
 			   struct pixcir_i2c_ts_data *tsdata)
 {
-	const struct of_device_id *match;
-
-	match = of_match_device(of_match_ptr(pixcir_of_match), dev);
-	if (!match)
-		return -EINVAL;
-
-	tsdata->chip = (const struct pixcir_i2c_chip_data *)match->data;
+	tsdata->chip = of_device_get_match_data(dev);
 	if (!tsdata->chip)
 		return -EINVAL;
 

drivers/input/touchscreen/wdt87xx_i2c.c

@@ -23,7 +23,7 @@
 #include <asm/unaligned.h>
 
 #define WDT87XX_NAME		"wdt87xx_i2c"
-#define WDT87XX_DRV_VER		"0.9.7"
+#define WDT87XX_DRV_VER		"0.9.8"
 #define WDT87XX_FW_NAME		"wdt87xx_fw.bin"
 #define WDT87XX_CFG_NAME	"wdt87xx_cfg.bin"
 
@@ -157,6 +157,7 @@
 /* Controller requires minimum 300us between commands */
 #define WDT_COMMAND_DELAY_MS		2
 #define WDT_FLASH_WRITE_DELAY_MS	4
+#define WDT_FLASH_ERASE_DELAY_MS	200
 #define WDT_FW_RESET_TIME		2500
 
 struct wdt87xx_sys_param {
@@ -726,7 +727,7 @@ static int wdt87xx_write_firmware(struct i2c_client *client, const void *chunk)
 				break;
 			}
 
-			msleep(50);
+			msleep(WDT_FLASH_ERASE_DELAY_MS);
 
 			error = wdt87xx_write_data(client, data, start_addr,
 						   page_size);

drivers/input/touchscreen/wm97xx-core.c

@@ -500,7 +500,7 @@ static int wm97xx_ts_input_open(struct input_dev *idev)
 {
 	struct wm97xx *wm = input_get_drvdata(idev);
 
-	wm->ts_workq = create_singlethread_workqueue("kwm97xx");
+	wm->ts_workq = alloc_ordered_workqueue("kwm97xx", 0);
 	if (wm->ts_workq == NULL) {
 		dev_err(wm->dev,
 			"Failed to create workqueue\n");