[media] staging: lirc_bt829: remove

This driver is for an old mach64 VT board, which also has a framebuffer
driver (atyfb) and userspace mach64 X driver.

It was merged in 2010 and noone has attempted to port it to rc-core,
which would be necessary to get it out of staging.

I have not been able to track down the hardware either.

Signed-off-by: Sean Young <sean@mess.org>
Cc: Jarod Wilson <jarod@redhat.com>
Cc: Leonid Froenchenko <lfroen@galileo.co.il>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

drivers/staging/media/lirc/Kconfig

@@ -12,12 +12,6 @@ menuconfig LIRC_STAGING
 
 if LIRC_STAGING
 
-config LIRC_BT829
-        tristate "BT829 based hardware"
-	depends on LIRC && PCI
-	help
-	  Driver for the IR interface on BT829-based hardware
-
 config LIRC_IMON
 	tristate "Legacy SoundGraph iMON Receiver and Display"
 	depends on LIRC && USB

drivers/staging/media/lirc/Makefile

@@ -3,7 +3,6 @@
 
 # Each configuration option enables a list of files.
 
-obj-$(CONFIG_LIRC_BT829)	+= lirc_bt829.o
 obj-$(CONFIG_LIRC_IMON)		+= lirc_imon.o
 obj-$(CONFIG_LIRC_SASEM)	+= lirc_sasem.o
 obj-$(CONFIG_LIRC_SIR)		+= lirc_sir.o

drivers/staging/media/lirc/lirc_bt829.c

@@ -1,401 +0,0 @@
-/*
- * Remote control driver for the TV-card based on bt829
- *
- *  by Leonid Froenchenko <lfroen@galileo.co.il>
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-*/
-
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/threads.h>
-#include <linux/sched.h>
-#include <linux/ioport.h>
-#include <linux/pci.h>
-#include <linux/delay.h>
-
-#include <media/lirc_dev.h>
-
-static int poll_main(void);
-static int atir_init_start(void);
-
-static void write_index(unsigned char index, unsigned int value);
-static unsigned int read_index(unsigned char index);
-
-static void do_i2c_start(void);
-static void do_i2c_stop(void);
-
-static void seems_wr_byte(unsigned char al);
-static unsigned char seems_rd_byte(void);
-
-static unsigned int read_index(unsigned char al);
-static void write_index(unsigned char ah, unsigned int edx);
-
-static void cycle_delay(int cycle);
-
-static void do_set_bits(unsigned char bl);
-static unsigned char do_get_bits(void);
-
-#define DATA_PCI_OFF 0x7FFC00
-#define WAIT_CYCLE   20
-
-#define DRIVER_NAME "lirc_bt829"
-
-static bool debug;
-
-static int atir_minor;
-static phys_addr_t pci_addr_phys;
-static unsigned char __iomem *pci_addr_lin;
-
-static struct lirc_driver atir_driver;
-
-static struct pci_dev *do_pci_probe(void)
-{
-	struct pci_dev *my_dev;
-
-	my_dev = pci_get_device(PCI_VENDOR_ID_ATI,
-				PCI_DEVICE_ID_ATI_264VT, NULL);
-	if (my_dev) {
-		pr_err("Using device: %s\n", pci_name(my_dev));
-		pci_addr_phys = 0;
-		if (my_dev->resource[0].flags & IORESOURCE_MEM) {
-			pci_addr_phys = my_dev->resource[0].start;
-			pr_info("memory at %pa\n", &pci_addr_phys);
-		}
-		if (pci_addr_phys == 0) {
-			pr_err("no memory resource ?\n");
-			pci_dev_put(my_dev);
-			return NULL;
-		}
-	} else {
-		pr_err("pci_probe failed\n");
-		return NULL;
-	}
-	return my_dev;
-}
-
-static int atir_add_to_buf(void *data, struct lirc_buffer *buf)
-{
-	unsigned char key;
-	int status;
-
-	status = poll_main();
-	key = (status >> 8) & 0xFF;
-	if (status & 0xFF) {
-		dev_dbg(atir_driver.dev, "reading key %02X\n", key);
-		lirc_buffer_write(buf, &key);
-		return 0;
-	}
-	return -ENODATA;
-}
-
-static int atir_set_use_inc(void *data)
-{
-	dev_dbg(atir_driver.dev, "driver is opened\n");
-	return 0;
-}
-
-static void atir_set_use_dec(void *data)
-{
-	dev_dbg(atir_driver.dev, "driver is closed\n");
-}
-
-int init_module(void)
-{
-	struct pci_dev *pdev;
-	int rc;
-
-	pdev = do_pci_probe();
-	if (!pdev)
-		return -ENODEV;
-
-	rc = pci_enable_device(pdev);
-	if (rc)
-		goto err_put_dev;
-
-	if (!atir_init_start()) {
-		rc = -ENODEV;
-		goto err_disable;
-	}
-
-	strcpy(atir_driver.name, "ATIR");
-	atir_driver.minor       = -1;
-	atir_driver.code_length = 8;
-	atir_driver.sample_rate = 10;
-	atir_driver.data        = NULL;
-	atir_driver.add_to_buf  = atir_add_to_buf;
-	atir_driver.set_use_inc = atir_set_use_inc;
-	atir_driver.set_use_dec = atir_set_use_dec;
-	atir_driver.dev         = &pdev->dev;
-	atir_driver.owner       = THIS_MODULE;
-
-	atir_minor = lirc_register_driver(&atir_driver);
-	if (atir_minor < 0) {
-		pr_err("failed to register driver!\n");
-		rc = atir_minor;
-		goto err_unmap;
-	}
-	dev_dbg(atir_driver.dev, "driver is registered on minor %d\n",
-				atir_minor);
-
-	return 0;
-
-err_unmap:
-	iounmap(pci_addr_lin);
-err_disable:
-	pci_disable_device(pdev);
-err_put_dev:
-	pci_dev_put(pdev);
-	return rc;
-}
-
-void cleanup_module(void)
-{
-	struct pci_dev *pdev = to_pci_dev(atir_driver.dev);
-
-	lirc_unregister_driver(atir_minor);
-	iounmap(pci_addr_lin);
-	pci_disable_device(pdev);
-	pci_dev_put(pdev);
-}
-
-static int atir_init_start(void)
-{
-	pci_addr_lin = ioremap(pci_addr_phys + DATA_PCI_OFF, 0x400);
-	if (!pci_addr_lin) {
-		pr_info("pci mem must be mapped\n");
-		return 0;
-	}
-	return 1;
-}
-
-static void cycle_delay(int cycle)
-{
-	udelay(WAIT_CYCLE * cycle);
-}
-
-static int poll_main(void)
-{
-	unsigned char status_high, status_low;
-
-	do_i2c_start();
-
-	seems_wr_byte(0xAA);
-	seems_wr_byte(0x01);
-
-	do_i2c_start();
-
-	seems_wr_byte(0xAB);
-
-	status_low = seems_rd_byte();
-	status_high = seems_rd_byte();
-
-	do_i2c_stop();
-
-	return (status_high << 8) | status_low;
-}
-
-static void do_i2c_start(void)
-{
-	do_set_bits(3);
-	cycle_delay(4);
-
-	do_set_bits(1);
-	cycle_delay(7);
-
-	do_set_bits(0);
-	cycle_delay(2);
-}
-
-static void do_i2c_stop(void)
-{
-	unsigned char bits;
-
-	bits =  do_get_bits() & 0xFD;
-	do_set_bits(bits);
-	cycle_delay(1);
-
-	bits |= 1;
-	do_set_bits(bits);
-	cycle_delay(2);
-
-	bits |= 2;
-	do_set_bits(bits);
-	bits = 3;
-	do_set_bits(bits);
-	cycle_delay(2);
-}
-
-static void seems_wr_byte(unsigned char value)
-{
-	int i;
-	unsigned char reg;
-
-	reg = do_get_bits();
-	for (i = 0; i < 8; i++) {
-		if (value & 0x80)
-			reg |= 0x02;
-		else
-			reg &= 0xFD;
-
-		do_set_bits(reg);
-		cycle_delay(1);
-
-		reg |= 1;
-		do_set_bits(reg);
-		cycle_delay(1);
-
-		reg &= 0xFE;
-		do_set_bits(reg);
-		cycle_delay(1);
-		value <<= 1;
-	}
-	cycle_delay(2);
-
-	reg |= 2;
-	do_set_bits(reg);
-
-	reg |= 1;
-	do_set_bits(reg);
-
-	cycle_delay(1);
-	do_get_bits();
-
-	reg &= 0xFE;
-	do_set_bits(reg);
-	cycle_delay(3);
-}
-
-static unsigned char seems_rd_byte(void)
-{
-	int i;
-	int rd_byte;
-	unsigned char bits_2, bits_1;
-
-	bits_1 = do_get_bits() | 2;
-	do_set_bits(bits_1);
-
-	rd_byte = 0;
-	for (i = 0; i < 8; i++) {
-		bits_1 &= 0xFE;
-		do_set_bits(bits_1);
-		cycle_delay(2);
-
-		bits_1 |= 1;
-		do_set_bits(bits_1);
-		cycle_delay(1);
-
-		bits_2 = do_get_bits();
-		if (bits_2 & 2)
-			rd_byte |= 1;
-
-		rd_byte <<= 1;
-	}
-
-	bits_1 = 0;
-	if (bits_2 == 0)
-		bits_1 |= 2;
-
-	do_set_bits(bits_1);
-	cycle_delay(2);
-
-	bits_1 |= 1;
-	do_set_bits(bits_1);
-	cycle_delay(3);
-
-	bits_1 &= 0xFE;
-	do_set_bits(bits_1);
-	cycle_delay(2);
-
-	rd_byte >>= 1;
-	rd_byte &= 0xFF;
-	return rd_byte;
-}
-
-static void do_set_bits(unsigned char new_bits)
-{
-	int reg_val;
-
-	reg_val = read_index(0x34);
-	if (new_bits & 2) {
-		reg_val &= 0xFFFFFFDF;
-		reg_val |= 1;
-	} else {
-		reg_val &= 0xFFFFFFFE;
-		reg_val |= 0x20;
-	}
-	reg_val |= 0x10;
-	write_index(0x34, reg_val);
-
-	reg_val = read_index(0x31);
-	if (new_bits & 1)
-		reg_val |= 0x1000000;
-	else
-		reg_val &= 0xFEFFFFFF;
-
-	reg_val |= 0x8000000;
-	write_index(0x31, reg_val);
-}
-
-static unsigned char do_get_bits(void)
-{
-	unsigned char bits;
-	int reg_val;
-
-	reg_val = read_index(0x34);
-	reg_val |= 0x10;
-	reg_val &= 0xFFFFFFDF;
-	write_index(0x34, reg_val);
-
-	reg_val = read_index(0x34);
-	bits = 0;
-	if (reg_val & 8)
-		bits |= 2;
-	else
-		bits &= 0xFD;
-
-	reg_val = read_index(0x31);
-	if (reg_val & 0x1000000)
-		bits |= 1;
-	else
-		bits &= 0xFE;
-
-	return bits;
-}
-
-static unsigned int read_index(unsigned char index)
-{
-	unsigned char __iomem *addr;
-	/*  addr = pci_addr_lin + DATA_PCI_OFF + ((index & 0xFF) << 2); */
-	addr = pci_addr_lin + ((index & 0xFF) << 2);
-	return readl(addr);
-}
-
-static void write_index(unsigned char index, unsigned int reg_val)
-{
-	unsigned char __iomem *addr;
-
-	addr = pci_addr_lin + ((index & 0xFF) << 2);
-	writel(reg_val, addr);
-}
-
-MODULE_AUTHOR("Froenchenko Leonid");
-MODULE_DESCRIPTION("IR remote driver for bt829 based TV cards");
-MODULE_LICENSE("GPL");
-
-module_param(debug, bool, S_IRUGO | S_IWUSR);
-MODULE_PARM_DESC(debug, "Debug enabled or not");