dmaengine: IOATDMA: Cleanup pre v3.0 chansts register reads

Remove pre-3.0 channel status reads. 3.0 and later chansts register
is 64bit and can be read 64bit. This was clarified with the hardware
architects and since the driver now only support 3.0+ we don't need the
legacy support

Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>

drivers/dma/ioat/dma.h

@@ -235,43 +235,11 @@ ioat_chan_by_index(struct ioatdma_device *ioat_dma, int index)
 	return ioat_dma->idx[index];
 }
 
-static inline u64 ioat_chansts_32(struct ioatdma_chan *ioat_chan)
-{
-	u8 ver = ioat_chan->ioat_dma->version;
-	u64 status;
-	u32 status_lo;
-
-	/* We need to read the low address first as this causes the
-	 * chipset to latch the upper bits for the subsequent read
-	 */
-	status_lo = readl(ioat_chan->reg_base + IOAT_CHANSTS_OFFSET_LOW(ver));
-	status = readl(ioat_chan->reg_base + IOAT_CHANSTS_OFFSET_HIGH(ver));
-	status <<= 32;
-	status |= status_lo;
-
-	return status;
-}
-
-#if BITS_PER_LONG == 64
-
 static inline u64 ioat_chansts(struct ioatdma_chan *ioat_chan)
 {
-	u8 ver = ioat_chan->ioat_dma->version;
-	u64 status;
-
-	 /* With IOAT v3.3 the status register is 64bit.  */
-	if (ver >= IOAT_VER_3_3)
-		status = readq(ioat_chan->reg_base + IOAT_CHANSTS_OFFSET(ver));
-	else
-		status = ioat_chansts_32(ioat_chan);
-
-	return status;
+	return readq(ioat_chan->reg_base + IOAT_CHANSTS_OFFSET);
 }
 
-#else
-#define ioat_chansts ioat_chansts_32
-#endif
-
 static inline u64 ioat_chansts_to_addr(u64 status)
 {
 	return status & IOAT_CHANSTS_COMPLETED_DESCRIPTOR_ADDR;

drivers/dma/ioat/registers.h

@@ -99,19 +99,9 @@
 #define IOAT_DMA_COMP_V1			0x0001	/* Compatibility with DMA version 1 */
 #define IOAT_DMA_COMP_V2			0x0002	/* Compatibility with DMA version 2 */
 
-
-#define IOAT1_CHANSTS_OFFSET		0x04	/* 64-bit Channel Status Register */
-#define IOAT2_CHANSTS_OFFSET		0x08	/* 64-bit Channel Status Register */
-#define IOAT_CHANSTS_OFFSET(ver)		((ver) < IOAT_VER_2_0 \
-						? IOAT1_CHANSTS_OFFSET : IOAT2_CHANSTS_OFFSET)
-#define IOAT1_CHANSTS_OFFSET_LOW	0x04
-#define IOAT2_CHANSTS_OFFSET_LOW	0x08
-#define IOAT_CHANSTS_OFFSET_LOW(ver)		((ver) < IOAT_VER_2_0 \
-						? IOAT1_CHANSTS_OFFSET_LOW : IOAT2_CHANSTS_OFFSET_LOW)
-#define IOAT1_CHANSTS_OFFSET_HIGH	0x08
-#define IOAT2_CHANSTS_OFFSET_HIGH	0x0C
-#define IOAT_CHANSTS_OFFSET_HIGH(ver)		((ver) < IOAT_VER_2_0 \
-						? IOAT1_CHANSTS_OFFSET_HIGH : IOAT2_CHANSTS_OFFSET_HIGH)
+/* IOAT1 define left for i7300_idle driver to not fail compiling */
+#define IOAT1_CHANSTS_OFFSET		0x04
+#define IOAT_CHANSTS_OFFSET		0x08	/* 64-bit Channel Status Register */
 #define IOAT_CHANSTS_COMPLETED_DESCRIPTOR_ADDR	(~0x3fULL)
 #define IOAT_CHANSTS_SOFT_ERR			0x10ULL
 #define IOAT_CHANSTS_UNAFFILIATED_ERR		0x8ULL