Merge tag 'arc-4.10-rc1-part1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc

Pull ARC updates from Vineet Gupta:
 "These are mostly timer/clocksource driver updates which were
  Reviewed/Acked by Daniel but had to be merged via ARC tree due to
  dependencies.

  I will follow up with another pull request with actual ARC changes
  early next week !

  Summary:

   - Moving ARC timer driver into drivers/clocksource

   - EZChip timer driver updates [Noam]

   - ARC AXS103 and HAPS platform updates [Alexey]"

* tag 'arc-4.10-rc1-part1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
  ARC: axs10x: really enable ARC PGU
  ARC: rename Zebu platform support to HAPS
  clocksource: nps: avoid maybe-uninitialized warning
  clocksource: Add clockevent support to NPS400 driver
  clocksource: update "fn" at CLOCKSOURCE_OF_DECLARE() of nps400 timer
  soc: Support for NPS HW scheduling
  clocksource: import ARC timer driver
  ARC: breakout timer include code into separate header ...
  ARC: move mcip.h into include/soc and adjust the includes
  ARC: breakout aux handling into a separate header
  ARC: time: move time_init() out of the driver
  ARC: timer: gfrc, rtc: build under same option (64-bit timers)
  ARC: timer: gfrc, rtc: Read BCR to detect whether hardware exists ...
  ARC: timer: gfrc, rtc: deuglify big endian code

Documentation/devicetree/bindings/timer/ezchip,nps400-timer0.txt

@@ -0,0 +1,17 @@
+NPS Network Processor
+
+Required properties:
+
+- compatible :	should be "ezchip,nps400-timer0"
+
+Clocks required for compatible = "ezchip,nps400-timer0":
+- interrupts : The interrupt of the first timer
+- clocks : Must contain a single entry describing the clock input
+
+Example:
+
+timer {
+	compatible = "ezchip,nps400-timer0";
+	interrupts = <3>;
+	clocks = <&sysclk>;
+};

Documentation/devicetree/bindings/timer/ezchip,nps400-timer.txt → Documentation/devicetree/bindings/timer/ezchip,nps400-timer1.txt

@@ -2,14 +2,14 @@ NPS Network Processor
 
 Required properties:
 
-- compatible :	should be "ezchip,nps400-timer"
+- compatible :	should be "ezchip,nps400-timer1"
 
-Clocks required for compatible = "ezchip,nps400-timer":
+Clocks required for compatible = "ezchip,nps400-timer1":
 - clocks : Must contain a single entry describing the clock input
 
 Example:
 
 timer {
-	compatible = "ezchip,nps400-timer";
+	compatible = "ezchip,nps400-timer1";
 	clocks = <&sysclk>;
 };

MAINTAINERS

@@ -11827,6 +11827,7 @@ S:	Supported
 F:	arch/arc/
 F:	Documentation/devicetree/bindings/arc/*
 F:	Documentation/devicetree/bindings/interrupt-controller/snps,arc*
+F:	drivers/clocksource/arc_timer.c
 F:	drivers/tty/serial/arc_uart.c
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc.git
 

arch/arc/Kconfig

@@ -8,9 +8,9 @@
 
 config ARC
 	def_bool y
+	select ARC_TIMERS
 	select ARCH_SUPPORTS_ATOMIC_RMW if ARC_HAS_LLSC
 	select BUILDTIME_EXTABLE_SORT
-	select CLKSRC_OF
 	select CLONE_BACKWARDS
 	select COMMON_CLK
 	select GENERIC_ATOMIC64 if !ISA_ARCV2 || !(ARC_HAS_LL64 && ARC_HAS_LLSC)
@@ -115,6 +115,7 @@ config ISA_ARCOMPACT
 
 config ISA_ARCV2
 	bool "ARC ISA v2"
+	select ARC_TIMERS_64BIT
 	help
 	  ISA for the Next Generation ARC-HS cores
 
@@ -410,16 +411,6 @@ config ARC_HAS_DIV_REM
 	bool "Insn: div, divu, rem, remu"
 	default y
 
-config ARC_HAS_RTC
-	bool "Local 64-bit r/o cycle counter"
-	default n
-	depends on !SMP
-
-config ARC_HAS_GFRC
-	bool "SMP synchronized 64-bit cycle counter"
-	default y
-	depends on SMP
-
 config ARC_NUMBER_OF_INTERRUPTS
 	int "Number of interrupts"
 	range 8 240

arch/arc/boot/dts/axs101.dts

@@ -17,6 +17,6 @@
 	compatible = "snps,axs101", "snps,arc-sdp";
 
 	chosen {
-		bootargs = "earlycon=uart8250,mmio32,0xe0022000,115200n8 console=tty0 console=ttyS3,115200n8 consoleblank=0";
+		bootargs = "earlycon=uart8250,mmio32,0xe0022000,115200n8 console=tty0 console=ttyS3,115200n8 consoleblank=0 video=1280x720@60";
 	};
 };

arch/arc/boot/dts/axs103_idu.dts

@@ -20,6 +20,6 @@
 	compatible = "snps,axs103", "snps,arc-sdp";
 
 	chosen {
-		bootargs = "earlycon=uart8250,mmio32,0xe0022000,115200n8 console=ttyS3,115200n8 debug print-fatal-signals=1";
+		bootargs = "earlycon=uart8250,mmio32,0xe0022000,115200n8 console=tty0 console=ttyS3,115200n8 print-fatal-signals=1 consoleblank=0 video=1280x720@60";
 	};
 };

arch/arc/configs/axs101_defconfig

@@ -75,9 +75,11 @@ CONFIG_I2C=y
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_DESIGNWARE_PLATFORM=y
 # CONFIG_HWMON is not set
+CONFIG_DRM=m
+CONFIG_DRM_I2C_ADV7511=m
+CONFIG_DRM_ARCPGU=m
 CONFIG_FB=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
 CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_MONO is not set
 # CONFIG_LOGO_LINUX_VGA16 is not set

arch/arc/configs/axs103_smp_defconfig

@@ -77,9 +77,11 @@ CONFIG_I2C=y
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_DESIGNWARE_PLATFORM=y
 # CONFIG_HWMON is not set
+CONFIG_DRM=m
+CONFIG_DRM_I2C_ADV7511=m
+CONFIG_DRM_ARCPGU=m
 CONFIG_FB=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
 CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_MONO is not set
 # CONFIG_LOGO_LINUX_VGA16 is not set

arch/arc/configs/zebu_hs_defconfig → arch/arc/configs/haps_hs_defconfig

@@ -23,7 +23,7 @@ CONFIG_MODULES=y
 # CONFIG_IOSCHED_CFQ is not set
 CONFIG_ARC_PLAT_SIM=y
 CONFIG_ISA_ARCV2=y
-CONFIG_ARC_BUILTIN_DTB_NAME="zebu_hs"
+CONFIG_ARC_BUILTIN_DTB_NAME="haps_hs"
 CONFIG_PREEMPT=y
 # CONFIG_COMPACTION is not set
 CONFIG_NET=y

arch/arc/configs/zebu_hs_smp_defconfig → arch/arc/configs/haps_hs_smp_defconfig

@@ -26,7 +26,7 @@ CONFIG_MODULES=y
 CONFIG_ARC_PLAT_SIM=y
 CONFIG_ISA_ARCV2=y
 CONFIG_SMP=y
-CONFIG_ARC_BUILTIN_DTB_NAME="zebu_hs_idu"
+CONFIG_ARC_BUILTIN_DTB_NAME="haps_hs_idu"
 CONFIG_PREEMPT=y
 # CONFIG_COMPACTION is not set
 CONFIG_NET=y

arch/arc/configs/nsimosci_hs_smp_defconfig

@@ -21,7 +21,7 @@ CONFIG_MODULES=y
 CONFIG_ARC_PLAT_SIM=y
 CONFIG_ISA_ARCV2=y
 CONFIG_SMP=y
-# CONFIG_ARC_HAS_GFRC is not set
+# CONFIG_ARC_TIMERS_64BIT is not set
 CONFIG_ARC_BUILTIN_DTB_NAME="nsimosci_hs_idu"
 CONFIG_PREEMPT=y
 # CONFIG_COMPACTION is not set

arch/arc/configs/vdk_hs38_smp_defconfig

@@ -15,7 +15,7 @@ CONFIG_ARC_PLAT_AXS10X=y
 CONFIG_AXS103=y
 CONFIG_ISA_ARCV2=y
 CONFIG_SMP=y
-# CONFIG_ARC_HAS_GFRC is not set
+# CONFIG_ARC_TIMERS_64BIT is not set
 CONFIG_ARC_UBOOT_SUPPORT=y
 CONFIG_ARC_BUILTIN_DTB_NAME="vdk_hs38_smp"
 CONFIG_PREEMPT=y

arch/arc/include/asm/arcregs.h

@@ -20,7 +20,6 @@
 #define ARC_REG_FP_V2_BCR	0xc8	/* ARCv2 FPU */
 #define ARC_REG_SLC_BCR		0xce
 #define ARC_REG_DCCM_BUILD	0x74	/* DCCM size (common) */
-#define ARC_REG_TIMERS_BCR	0x75
 #define ARC_REG_AP_BCR		0x76
 #define ARC_REG_ICCM_BUILD	0x78	/* ICCM size (common) */
 #define ARC_REG_XY_MEM_BCR	0x79
@@ -112,90 +111,7 @@
 
 #ifndef __ASSEMBLY__
 
-/*
- ******************************************************************
- *      Inline ASM macros to read/write AUX Regs
- *      Essentially invocation of lr/sr insns from "C"
- */
-
-#if 1
-
-#define read_aux_reg(reg)	__builtin_arc_lr(reg)
-
-/* gcc builtin sr needs reg param to be long immediate */
-#define write_aux_reg(reg_immed, val)		\
-		__builtin_arc_sr((unsigned int)(val), reg_immed)
-
-#else
-
-#define read_aux_reg(reg)		\
-({					\
-	unsigned int __ret;		\
-	__asm__ __volatile__(		\
-	"	lr    %0, [%1]"		\
-	: "=r"(__ret)			\
-	: "i"(reg));			\
-	__ret;				\
-})
-
-/*
- * Aux Reg address is specified as long immediate by caller
- * e.g.
- *    write_aux_reg(0x69, some_val);
- * This generates tightest code.
- */
-#define write_aux_reg(reg_imm, val)	\
-({					\
-	__asm__ __volatile__(		\
-	"	sr   %0, [%1]	\n"	\
-	:				\
-	: "ir"(val), "i"(reg_imm));	\
-})
-
-/*
- * Aux Reg address is specified in a variable
- *  * e.g.
- *      reg_num = 0x69
- *      write_aux_reg2(reg_num, some_val);
- * This has to generate glue code to load the reg num from
- *  memory to a reg hence not recommended.
- */
-#define write_aux_reg2(reg_in_var, val)		\
-({						\
-	unsigned int tmp;			\
-						\
-	__asm__ __volatile__(			\
-	"	ld   %0, [%2]	\n\t"		\
-	"	sr   %1, [%0]	\n\t"		\
-	: "=&r"(tmp)				\
-	: "r"(val), "memory"(&reg_in_var));	\
-})
-
-#endif
-
-#define READ_BCR(reg, into)				\
-{							\
-	unsigned int tmp;				\
-	tmp = read_aux_reg(reg);			\
-	if (sizeof(tmp) == sizeof(into)) {		\
-		into = *((typeof(into) *)&tmp);		\
-	} else {					\
-		extern void bogus_undefined(void);	\
-		bogus_undefined();			\
-	}						\
-}
-
-#define WRITE_AUX(reg, into)				\
-{							\
-	unsigned int tmp;				\
-	if (sizeof(tmp) == sizeof(into)) {		\
-		tmp = (*(unsigned int *)&(into));	\
-		write_aux_reg(reg, tmp);		\
-	} else  {					\
-		extern void bogus_undefined(void);	\
-		bogus_undefined();			\
-	}						\
-}
+#include <soc/arc/aux.h>
 
 /* Helpers */
 #define TO_KB(bytes)		((bytes) >> 10)
@@ -291,13 +207,7 @@ struct bcr_fp_arcv2 {
 #endif
 };
 
-struct bcr_timer {
-#ifdef CONFIG_CPU_BIG_ENDIAN
-	unsigned int pad2:15, rtsc:1, pad1:5, rtc:1, t1:1, t0:1, ver:8;
-#else
-	unsigned int ver:8, t0:1, t1:1, rtc:1, pad1:5, rtsc:1, pad2:15;
-#endif
-};
+#include <soc/arc/timers.h>
 
 struct bcr_bpu_arcompact {
 #ifdef CONFIG_CPU_BIG_ENDIAN

arch/arc/kernel/Makefile

@@ -8,7 +8,7 @@
 # Pass UTS_MACHINE for user_regset definition
 CFLAGS_ptrace.o		+= -DUTS_MACHINE='"$(UTS_MACHINE)"'
 
-obj-y	:= arcksyms.o setup.o irq.o time.o reset.o ptrace.o process.o devtree.o
+obj-y	:= arcksyms.o setup.o irq.o reset.o ptrace.o process.o devtree.o
 obj-y	+= signal.o traps.o sys.o troubleshoot.o stacktrace.o disasm.o
 obj-$(CONFIG_ISA_ARCOMPACT)		+= entry-compact.o intc-compact.o
 obj-$(CONFIG_ISA_ARCV2)			+= entry-arcv2.o intc-arcv2.o

arch/arc/kernel/mcip.c

@@ -11,8 +11,8 @@
 #include <linux/smp.h>
 #include <linux/irq.h>
 #include <linux/spinlock.h>
+#include <soc/arc/mcip.h>
 #include <asm/irqflags-arcv2.h>
-#include <asm/mcip.h>
 #include <asm/setup.h>
 
 static DEFINE_RAW_SPINLOCK(mcip_lock);

arch/arc/kernel/setup.c

@@ -10,6 +10,8 @@
 #include <linux/fs.h>
 #include <linux/delay.h>
 #include <linux/root_dev.h>
+#include <linux/clk-provider.h>
+#include <linux/clocksource.h>
 #include <linux/console.h>
 #include <linux/module.h>
 #include <linux/cpu.h>
@@ -234,11 +236,11 @@ static char *arc_cpu_mumbojumbo(int cpu_id, char *buf, int len)
 		       is_isa_arcompact() ? "ARCompact" : "ARCv2",
 		       IS_AVAIL1(cpu->isa.be, "[Big-Endian]"));
 
-	n += scnprintf(buf + n, len - n, "Timers\t\t: %s%s%s%s\nISA Extn\t: ",
+	n += scnprintf(buf + n, len - n, "Timers\t\t: %s%s%s%s%s%s\nISA Extn\t: ",
 		       IS_AVAIL1(cpu->extn.timer0, "Timer0 "),
 		       IS_AVAIL1(cpu->extn.timer1, "Timer1 "),
-		       IS_AVAIL2(cpu->extn.rtc, "Local-64-bit-Ctr ",
-				 CONFIG_ARC_HAS_RTC));
+		       IS_AVAIL2(cpu->extn.rtc, "RTC [UP 64-bit] ", CONFIG_ARC_TIMERS_64BIT),
+		       IS_AVAIL2(cpu->extn.gfrc, "GFRC [SMP 64-bit] ", CONFIG_ARC_TIMERS_64BIT));
 
 	n += i = scnprintf(buf + n, len - n, "%s%s%s%s%s",
 			   IS_AVAIL2(cpu->isa.atomic, "atomic ", CONFIG_ARC_HAS_LLSC),
@@ -449,6 +451,15 @@ void __init setup_arch(char **cmdline_p)
 	arc_unwind_init();
 }
 
+/*
+ * Called from start_kernel() - boot CPU only
+ */
+void __init time_init(void)
+{
+	of_clk_init(NULL);
+	clocksource_probe();
+}
+
 static int __init customize_machine(void)
 {
 	if (machine_desc->init_machine)

arch/arc/plat-axs10x/axs10x.c

@@ -21,7 +21,7 @@
 #include <asm/asm-offsets.h>
 #include <asm/io.h>
 #include <asm/mach_desc.h>
-#include <asm/mcip.h>
+#include <soc/arc/mcip.h>
 
 #define AXS_MB_CGU		0xE0010000
 #define AXS_MB_CREG		0xE0011000

arch/arc/plat-eznps/include/plat/ctop.h

@@ -46,9 +46,7 @@
 #define CTOP_AUX_UDMC				(CTOP_AUX_BASE + 0x300)
 
 /* EZchip core instructions */
-#define CTOP_INST_HWSCHD_OFF_R3			0x3B6F00BF
 #define CTOP_INST_HWSCHD_OFF_R4			0x3C6F00BF
-#define CTOP_INST_HWSCHD_RESTORE_R3		0x3E6F70C3
 #define CTOP_INST_HWSCHD_RESTORE_R4		0x3E6F7103
 #define CTOP_INST_SCHD_RW			0x3E6F7004
 #define CTOP_INST_SCHD_RD			0x3E6F7084

drivers/clocksource/Kconfig

@@ -282,6 +282,26 @@ config CLKSRC_MPS2
 	select CLKSRC_MMIO
 	select CLKSRC_OF
 
+config ARC_TIMERS
+	bool "Support for 32-bit TIMERn counters in ARC Cores" if COMPILE_TEST
+	depends on GENERIC_CLOCKEVENTS
+	select CLKSRC_OF
+	help
+	  These are legacy 32-bit TIMER0 and TIMER1 counters found on all ARC cores
+	  (ARC700 as well as ARC HS38).
+	  TIMER0 serves as clockevent while TIMER1 provides clocksource
+
+config ARC_TIMERS_64BIT
+	bool "Support for 64-bit counters in ARC HS38 cores" if COMPILE_TEST
+	depends on GENERIC_CLOCKEVENTS
+	depends on ARC_TIMERS
+	select CLKSRC_OF
+	help
+	  This enables 2 different 64-bit timers: RTC (for UP) and GFRC (for SMP)
+	  RTC is implemented inside the core, while GFRC sits outside the core in
+	  ARConnect IP block. Driver automatically picks one of them for clocksource
+	  as appropriate.
+
 config ARM_ARCH_TIMER
 	bool
 	select CLKSRC_OF if OF

drivers/clocksource/Makefile

@@ -51,6 +51,7 @@ obj-$(CONFIG_CLKSRC_TI_32K)	+= timer-ti-32k.o
 obj-$(CONFIG_CLKSRC_NPS)	+= timer-nps.o
 obj-$(CONFIG_OXNAS_RPS_TIMER)	+= timer-oxnas-rps.o
 
+obj-$(CONFIG_ARC_TIMERS)		+= arc_timer.o
 obj-$(CONFIG_ARM_ARCH_TIMER)		+= arm_arch_timer.o
 obj-$(CONFIG_ARM_GLOBAL_TIMER)		+= arm_global_timer.o
 obj-$(CONFIG_ARMV7M_SYSTICK)		+= armv7m_systick.o

arch/arc/kernel/time.c → drivers/clocksource/arc_timer.c

@@ -1,32 +1,18 @@
 /*
+ * Copyright (C) 2016-17 Synopsys, Inc. (www.synopsys.com)
  * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
- *
- * vineetg: Jan 1011
- *  -sched_clock( ) no longer jiffies based. Uses the same clocksource
- *   as gtod
- *
- * Rajeshwarr/Vineetg: Mar 2008
- *  -Implemented CONFIG_GENERIC_TIME (rather deleted arch specific code)
- *   for arch independent gettimeofday()
- *  -Implemented CONFIG_GENERIC_CLOCKEVENTS as base for hrtimers
- *
- * Vineetg: Mar 2008: Forked off from time.c which now is time-jiff.c
  */
 
-/* ARC700 has two 32bit independent prog Timers: TIMER0 and TIMER1
- * Each can programmed to go from @count to @limit and optionally
- * interrupt when that happens.
- * A write to Control Register clears the Interrupt
+/* ARC700 has two 32bit independent prog Timers: TIMER0 and TIMER1, Each can be
+ * programmed to go from @count to @limit and optionally interrupt.
+ * We've designated TIMER0 for clockevents and TIMER1 for clocksource
  *
- * We've designated TIMER0 for events (clockevents)
- * while TIMER1 for free running (clocksource)
- *
- * Newer ARC700 cores have 64bit clk fetching RTSC insn, preferred over TIMER1
- * which however is currently broken
+ * ARCv2 based HS38 cores have RTC (in-core) and GFRC (inside ARConnect/MCIP)
+ * which are suitable for UP and SMP based clocksources respectively
  */
 
 #include <linux/interrupt.h>
@@ -37,23 +23,10 @@
 #include <linux/cpu.h>
 #include <linux/of.h>
 #include <linux/of_irq.h>
-#include <asm/irq.h>
-#include <asm/arcregs.h>
-
-#include <asm/mcip.h>
 
-/* Timer related Aux registers */
-#define ARC_REG_TIMER0_LIMIT	0x23	/* timer 0 limit */
-#define ARC_REG_TIMER0_CTRL	0x22	/* timer 0 control */
-#define ARC_REG_TIMER0_CNT	0x21	/* timer 0 count */
-#define ARC_REG_TIMER1_LIMIT	0x102	/* timer 1 limit */
-#define ARC_REG_TIMER1_CTRL	0x101	/* timer 1 control */
-#define ARC_REG_TIMER1_CNT	0x100	/* timer 1 count */
+#include <soc/arc/timers.h>
+#include <soc/arc/mcip.h>
 
-#define TIMER_CTRL_IE	(1 << 0) /* Interrupt when Count reaches limit */
-#define TIMER_CTRL_NH	(1 << 1) /* Count only when CPU NOT halted */
-
-#define ARC_TIMER_MAX	0xFFFFFFFF
 
 static unsigned long arc_timer_freq;
 
@@ -81,31 +54,24 @@ static int noinline arc_get_timer_clk(struct device_node *node)
 
 /********** Clock Source Device *********/
 
-#ifdef CONFIG_ARC_HAS_GFRC
+#ifdef CONFIG_ARC_TIMERS_64BIT
 
 static cycle_t arc_read_gfrc(struct clocksource *cs)
 {
 	unsigned long flags;
-	union {
-#ifdef CONFIG_CPU_BIG_ENDIAN
-		struct { u32 h, l; };
-#else
-		struct { u32 l, h; };
-#endif
-		cycle_t  full;
-	} stamp;
+	u32 l, h;
 
 	local_irq_save(flags);
 
 	__mcip_cmd(CMD_GFRC_READ_LO, 0);
-	stamp.l = read_aux_reg(ARC_REG_MCIP_READBACK);
+	l = read_aux_reg(ARC_REG_MCIP_READBACK);
 
 	__mcip_cmd(CMD_GFRC_READ_HI, 0);
-	stamp.h = read_aux_reg(ARC_REG_MCIP_READBACK);
+	h = read_aux_reg(ARC_REG_MCIP_READBACK);
 
 	local_irq_restore(flags);
 
-	return stamp.full;
+	return (((cycle_t)h) << 32) | l;
 }
 
 static struct clocksource arc_counter_gfrc = {
@@ -118,11 +84,14 @@ static struct clocksource arc_counter_gfrc = {
 
 static int __init arc_cs_setup_gfrc(struct device_node *node)
 {
-	int exists = cpuinfo_arc700[0].extn.gfrc;
+	struct mcip_bcr mp;
 	int ret;
 
-	if (WARN(!exists, "Global-64-bit-Ctr clocksource not detected"))
+	READ_BCR(ARC_REG_MCIP_BCR, mp);
+	if (!mp.gfrc) {
+		pr_warn("Global-64-bit-Ctr clocksource not detected");
 		return -ENXIO;
+	}
 
 	ret = arc_get_timer_clk(node);
 	if (ret)
@@ -132,10 +101,6 @@ static int __init arc_cs_setup_gfrc(struct device_node *node)
 }
 CLOCKSOURCE_OF_DECLARE(arc_gfrc, "snps,archs-timer-gfrc", arc_cs_setup_gfrc);
 
-#endif
-
-#ifdef CONFIG_ARC_HAS_RTC
-
 #define AUX_RTC_CTRL	0x103
 #define AUX_RTC_LOW	0x104
 #define AUX_RTC_HIGH	0x105
@@ -143,14 +108,7 @@ CLOCKSOURCE_OF_DECLARE(arc_gfrc, "snps,archs-timer-gfrc", arc_cs_setup_gfrc);
 static cycle_t arc_read_rtc(struct clocksource *cs)
 {
 	unsigned long status;
-	union {
-#ifdef CONFIG_CPU_BIG_ENDIAN
-		struct { u32 high, low; };
-#else
-		struct { u32 low, high; };
-#endif
-		cycle_t  full;
-	} stamp;
+	u32 l, h;
 
 	/*
 	 * hardware has an internal state machine which tracks readout of
@@ -159,12 +117,12 @@ static cycle_t arc_read_rtc(struct clocksource *cs)
 	 *  - high increments after low has been read
 	 */
 	do {
-		stamp.low = read_aux_reg(AUX_RTC_LOW);
-		stamp.high = read_aux_reg(AUX_RTC_HIGH);
+		l = read_aux_reg(AUX_RTC_LOW);
+		h = read_aux_reg(AUX_RTC_HIGH);
 		status = read_aux_reg(AUX_RTC_CTRL);
 	} while (!(status & _BITUL(31)));
 
-	return stamp.full;
+	return (((cycle_t)h) << 32) | l;
 }
 
 static struct clocksource arc_counter_rtc = {
@@ -177,15 +135,20 @@ static struct clocksource arc_counter_rtc = {
 
 static int __init arc_cs_setup_rtc(struct device_node *node)
 {
-	int exists = cpuinfo_arc700[smp_processor_id()].extn.rtc;
+	struct bcr_timer timer;
 	int ret;
 
-	if (WARN(!exists, "Local-64-bit-Ctr clocksource not detected"))
+	READ_BCR(ARC_REG_TIMERS_BCR, timer);
+	if (!timer.rtc) {
+		pr_warn("Local-64-bit-Ctr clocksource not detected");
 		return -ENXIO;
+	}
 
 	/* Local to CPU hence not usable in SMP */
-	if (WARN(IS_ENABLED(CONFIG_SMP), "Local-64-bit-Ctr not usable in SMP"))
+	if (IS_ENABLED(CONFIG_SMP)) {
+		pr_warn("Local-64-bit-Ctr not usable in SMP");
 		return -EINVAL;
+	}
 
 	ret = arc_get_timer_clk(node);
 	if (ret)
@@ -228,7 +191,7 @@ static int __init arc_cs_setup_timer1(struct device_node *node)
 	if (ret)
 		return ret;
 
-	write_aux_reg(ARC_REG_TIMER1_LIMIT, ARC_TIMER_MAX);
+	write_aux_reg(ARC_REG_TIMER1_LIMIT, ARC_TIMERN_MAX);
 	write_aux_reg(ARC_REG_TIMER1_CNT, 0);
 	write_aux_reg(ARC_REG_TIMER1_CTRL, TIMER_CTRL_NH);
 
@@ -306,7 +269,7 @@ static int arc_timer_starting_cpu(unsigned int cpu)
 
 	evt->cpumask = cpumask_of(smp_processor_id());
 
-	clockevents_config_and_register(evt, arc_timer_freq, 0, ARC_TIMER_MAX);
+	clockevents_config_and_register(evt, arc_timer_freq, 0, ARC_TIMERN_MAX);
 	enable_percpu_irq(arc_timer_irq, 0);
 	return 0;
 }
@@ -371,12 +334,3 @@ static int __init arc_of_timer_init(struct device_node *np)
 	return ret;
 }
 CLOCKSOURCE_OF_DECLARE(arc_clkevt, "snps,arc-timer", arc_of_timer_init);
-
-/*
- * Called from start_kernel() - boot CPU only
- */
-void __init time_init(void)
-{
-	of_clk_init(NULL);
-	clocksource_probe();
-}

drivers/clocksource/timer-nps.c

@@ -46,7 +46,36 @@
 /* This array is per cluster of CPUs (Each NPS400 cluster got 256 CPUs) */
 static void *nps_msu_reg_low_addr[NPS_CLUSTER_NUM] __read_mostly;
 
-static unsigned long nps_timer_rate;
+static int __init nps_get_timer_clk(struct device_node *node,
+			     unsigned long *timer_freq,
+			     struct clk **clk)
+{
+	int ret;
+
+	*clk = of_clk_get(node, 0);
+	ret = PTR_ERR_OR_ZERO(*clk);
+	if (ret) {
+		pr_err("timer missing clk");
+		return ret;
+	}
+
+	ret = clk_prepare_enable(*clk);
+	if (ret) {
+		pr_err("Couldn't enable parent clk\n");
+		clk_put(*clk);
+		return ret;
+	}
+
+	*timer_freq = clk_get_rate(*clk);
+	if (!(*timer_freq)) {
+		pr_err("Couldn't get clk rate\n");
+		clk_disable_unprepare(*clk);
+		clk_put(*clk);
+		return -EINVAL;
+	}
+
+	return 0;
+}
 
 static cycle_t nps_clksrc_read(struct clocksource *clksrc)
 {
@@ -55,26 +84,24 @@ static cycle_t nps_clksrc_read(struct clocksource *clksrc)
 	return (cycle_t)ioread32be(nps_msu_reg_low_addr[cluster]);
 }
 
-static int __init nps_setup_clocksource(struct device_node *node,
-					struct clk *clk)
+static int __init nps_setup_clocksource(struct device_node *node)
 {
 	int ret, cluster;
+	struct clk *clk;
+	unsigned long nps_timer1_freq;
+
 
 	for (cluster = 0; cluster < NPS_CLUSTER_NUM; cluster++)
 		nps_msu_reg_low_addr[cluster] =
 			nps_host_reg((cluster << NPS_CLUSTER_OFFSET),
-				 NPS_MSU_BLKID, NPS_MSU_TICK_LOW);
+				     NPS_MSU_BLKID, NPS_MSU_TICK_LOW);
 
-	ret = clk_prepare_enable(clk);
-	if (ret) {
-		pr_err("Couldn't enable parent clock\n");
+	ret = nps_get_timer_clk(node, &nps_timer1_freq, &clk);
+	if (ret)
 		return ret;
-	}
-
-	nps_timer_rate = clk_get_rate(clk);
 
-	ret = clocksource_mmio_init(nps_msu_reg_low_addr, "EZnps-tick",
-				    nps_timer_rate, 301, 32, nps_clksrc_read);
+	ret = clocksource_mmio_init(nps_msu_reg_low_addr, "nps-tick",
+				    nps_timer1_freq, 300, 32, nps_clksrc_read);
 	if (ret) {
 		pr_err("Couldn't register clock source.\n");
 		clk_disable_unprepare(clk);
@@ -83,18 +110,175 @@ static int __init nps_setup_clocksource(struct device_node *node,
 	return ret;
 }
 
-static int __init nps_timer_init(struct device_node *node)
+CLOCKSOURCE_OF_DECLARE(ezchip_nps400_clksrc, "ezchip,nps400-timer",
+		       nps_setup_clocksource);
+CLOCKSOURCE_OF_DECLARE(ezchip_nps400_clk_src, "ezchip,nps400-timer1",
+		       nps_setup_clocksource);
+
+#ifdef CONFIG_EZNPS_MTM_EXT
+#include <soc/nps/mtm.h>
+
+/* Timer related Aux registers */
+#define NPS_REG_TIMER0_TSI	0xFFFFF850
+#define NPS_REG_TIMER0_LIMIT	0x23
+#define NPS_REG_TIMER0_CTRL	0x22
+#define NPS_REG_TIMER0_CNT	0x21
+
+/*
+ * Interrupt Enabled (IE) - re-arm the timer
+ * Not Halted (NH) - is cleared when working with JTAG (for debug)
+ */
+#define TIMER0_CTRL_IE		BIT(0)
+#define TIMER0_CTRL_NH		BIT(1)
+
+static unsigned long nps_timer0_freq;
+static unsigned long nps_timer0_irq;
+
+static void nps_clkevent_rm_thread(void)
+{
+	int thread;
+	unsigned int cflags, enabled_threads;
+
+	hw_schd_save(&cflags);
+
+	enabled_threads = read_aux_reg(NPS_REG_TIMER0_TSI);
+
+	/* remove thread from TSI1 */
+	thread = read_aux_reg(CTOP_AUX_THREAD_ID);
+	enabled_threads &= ~(1 << thread);
+	write_aux_reg(NPS_REG_TIMER0_TSI, enabled_threads);
+
+	/* Acknowledge and if needed re-arm the timer */
+	if (!enabled_threads)
+		write_aux_reg(NPS_REG_TIMER0_CTRL, TIMER0_CTRL_NH);
+	else
+		write_aux_reg(NPS_REG_TIMER0_CTRL,
+			      TIMER0_CTRL_IE | TIMER0_CTRL_NH);
+
+	hw_schd_restore(cflags);
+}
+
+static void nps_clkevent_add_thread(unsigned long delta)
+{
+	int thread;
+	unsigned int cflags, enabled_threads;
+
+	hw_schd_save(&cflags);
+
+	/* add thread to TSI1 */
+	thread = read_aux_reg(CTOP_AUX_THREAD_ID);
+	enabled_threads = read_aux_reg(NPS_REG_TIMER0_TSI);
+	enabled_threads |= (1 << thread);
+	write_aux_reg(NPS_REG_TIMER0_TSI, enabled_threads);
+
+	/* set next timer event */
+	write_aux_reg(NPS_REG_TIMER0_LIMIT, delta);
+	write_aux_reg(NPS_REG_TIMER0_CNT, 0);
+	write_aux_reg(NPS_REG_TIMER0_CTRL,
+		      TIMER0_CTRL_IE | TIMER0_CTRL_NH);
+
+	hw_schd_restore(cflags);
+}
+
+/*
+ * Whenever anyone tries to change modes, we just mask interrupts
+ * and wait for the next event to get set.
+ */
+static int nps_clkevent_set_state(struct clock_event_device *dev)
+{
+	nps_clkevent_rm_thread();
+	disable_percpu_irq(nps_timer0_irq);
+
+	return 0;
+}
+
+static int nps_clkevent_set_next_event(unsigned long delta,
+				       struct clock_event_device *dev)
+{
+	nps_clkevent_add_thread(delta);
+	enable_percpu_irq(nps_timer0_irq, IRQ_TYPE_NONE);
+
+	return 0;
+}
+
+static DEFINE_PER_CPU(struct clock_event_device, nps_clockevent_device) = {
+	.name				=	"NPS Timer0",
+	.features			=	CLOCK_EVT_FEAT_ONESHOT,
+	.rating				=	300,
+	.set_next_event			=	nps_clkevent_set_next_event,
+	.set_state_oneshot		=	nps_clkevent_set_state,
+	.set_state_oneshot_stopped	=	nps_clkevent_set_state,
+	.set_state_shutdown		=	nps_clkevent_set_state,
+	.tick_resume			=	nps_clkevent_set_state,
+};
+
+static irqreturn_t timer_irq_handler(int irq, void *dev_id)
+{
+	struct clock_event_device *evt = dev_id;
+
+	nps_clkevent_rm_thread();
+	evt->event_handler(evt);
+
+	return IRQ_HANDLED;
+}
+
+static int nps_timer_starting_cpu(unsigned int cpu)
+{
+	struct clock_event_device *evt = this_cpu_ptr(&nps_clockevent_device);
+
+	evt->cpumask = cpumask_of(smp_processor_id());
+
+	clockevents_config_and_register(evt, nps_timer0_freq, 0, ULONG_MAX);
+	enable_percpu_irq(nps_timer0_irq, IRQ_TYPE_NONE);
+
+	return 0;
+}
+
+static int nps_timer_dying_cpu(unsigned int cpu)
+{
+	disable_percpu_irq(nps_timer0_irq);
+	return 0;
+}
+
+static int __init nps_setup_clockevent(struct device_node *node)
 {
 	struct clk *clk;
+	int ret;
 
-	clk = of_clk_get(node, 0);
-	if (IS_ERR(clk)) {
-		pr_err("Can't get timer clock.\n");
-		return PTR_ERR(clk);
+	nps_timer0_irq = irq_of_parse_and_map(node, 0);
+	if (nps_timer0_irq <= 0) {
+		pr_err("clockevent: missing irq");
+		return -EINVAL;
 	}
 
-	return nps_setup_clocksource(node, clk);
+	ret = nps_get_timer_clk(node, &nps_timer0_freq, &clk);
+	if (ret)
+		return ret;
+
+	/* Needs apriori irq_set_percpu_devid() done in intc map function */
+	ret = request_percpu_irq(nps_timer0_irq, timer_irq_handler,
+				 "Timer0 (per-cpu-tick)",
+				 &nps_clockevent_device);
+	if (ret) {
+		pr_err("Couldn't request irq\n");
+		clk_disable_unprepare(clk);
+		return ret;
+	}
+
+	ret = cpuhp_setup_state(CPUHP_AP_ARC_TIMER_STARTING,
+				"clockevents/nps:starting",
+				nps_timer_starting_cpu,
+				nps_timer_dying_cpu);
+	if (ret) {
+		pr_err("Failed to setup hotplug state");
+		clk_disable_unprepare(clk);
+		free_percpu_irq(nps_timer0_irq, &nps_clockevent_device);
+		return ret;
+	}
+
+	return 0;
 }
 
-CLOCKSOURCE_OF_DECLARE(ezchip_nps400_clksrc, "ezchip,nps400-timer",
-		       nps_timer_init);
+CLOCKSOURCE_OF_DECLARE(ezchip_nps400_clk_evt, "ezchip,nps400-timer0",
+		       nps_setup_clockevent);
+#endif /* CONFIG_EZNPS_MTM_EXT */

include/soc/arc/aux.h

@@ -0,0 +1,63 @@
+/*
+ * Copyright (C) 2016-2017 Synopsys, Inc. (www.synopsys.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __SOC_ARC_AUX_H__
+#define __SOC_ARC_AUX_H__
+
+#ifdef CONFIG_ARC
+
+#define read_aux_reg(r)		__builtin_arc_lr(r)
+
+/* gcc builtin sr needs reg param to be long immediate */
+#define write_aux_reg(r, v)	__builtin_arc_sr((unsigned int)(v), r)
+
+#else	/* !CONFIG_ARC */
+
+static inline int read_aux_reg(u32 r)
+{
+	return 0;
+}
+
+/*
+ * function helps elide unused variable warning
+ * see: http://lists.infradead.org/pipermail/linux-snps-arc/2016-November/001748.html
+ */
+static inline void write_aux_reg(u32 r, u32 v)
+{
+	;
+}
+
+#endif
+
+#define READ_BCR(reg, into)				\
+{							\
+	unsigned int tmp;				\
+	tmp = read_aux_reg(reg);			\
+	if (sizeof(tmp) == sizeof(into)) {		\
+		into = *((typeof(into) *)&tmp);		\
+	} else {					\
+		extern void bogus_undefined(void);	\
+		bogus_undefined();			\
+	}						\
+}
+
+#define WRITE_AUX(reg, into)				\
+{							\
+	unsigned int tmp;				\
+	if (sizeof(tmp) == sizeof(into)) {		\
+		tmp = (*(unsigned int *)&(into));	\
+		write_aux_reg(reg, tmp);		\
+	} else  {					\
+		extern void bogus_undefined(void);	\
+		bogus_undefined();			\
+	}						\
+}
+
+
+#endif

arch/arc/include/asm/mcip.h → include/soc/arc/mcip.h

@@ -8,12 +8,10 @@
  * published by the Free Software Foundation.
  */
 
-#ifndef __ASM_MCIP_H
-#define __ASM_MCIP_H
+#ifndef __SOC_ARC_MCIP_H
+#define __SOC_ARC_MCIP_H
 
-#ifdef CONFIG_ISA_ARCV2
-
-#include <asm/arcregs.h>
+#include <soc/arc/aux.h>
 
 #define ARC_REG_MCIP_BCR	0x0d0
 #define ARC_REG_MCIP_CMD	0x600
@@ -103,5 +101,3 @@ static inline void __mcip_cmd_data(unsigned int cmd, unsigned int param,
 }
 
 #endif
-
-#endif

include/soc/arc/timers.h

@@ -0,0 +1,38 @@
+/*
+ * Copyright (C) 2016-17 Synopsys, Inc. (www.synopsys.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __SOC_ARC_TIMERS_H
+#define __SOC_ARC_TIMERS_H
+
+#include <soc/arc/aux.h>
+
+/* Timer related Aux registers */
+#define ARC_REG_TIMER0_LIMIT	0x23	/* timer 0 limit */
+#define ARC_REG_TIMER0_CTRL	0x22	/* timer 0 control */
+#define ARC_REG_TIMER0_CNT	0x21	/* timer 0 count */
+#define ARC_REG_TIMER1_LIMIT	0x102	/* timer 1 limit */
+#define ARC_REG_TIMER1_CTRL	0x101	/* timer 1 control */
+#define ARC_REG_TIMER1_CNT	0x100	/* timer 1 count */
+
+/* CTRL reg bits */
+#define TIMER_CTRL_IE	        (1 << 0) /* Interrupt when Count reaches limit */
+#define TIMER_CTRL_NH	        (1 << 1) /* Count only when CPU NOT halted */
+
+#define ARC_TIMERN_MAX		0xFFFFFFFF
+
+#define ARC_REG_TIMERS_BCR	0x75
+
+struct bcr_timer {
+#ifdef CONFIG_CPU_BIG_ENDIAN
+	unsigned int pad2:15, rtsc:1, pad1:5, rtc:1, t1:1, t0:1, ver:8;
+#else
+	unsigned int ver:8, t0:1, t1:1, rtc:1, pad1:5, rtsc:1, pad2:15;
+#endif
+};
+
+#endif

include/soc/nps/mtm.h

@@ -0,0 +1,59 @@
+/*
+ * Copyright (c) 2016, Mellanox Technologies. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ *     Redistribution and use in source and binary forms, with or
+ *     without modification, are permitted provided that the following
+ *     conditions are met:
+ *
+ *      - Redistributions of source code must retain the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer.
+ *
+ *      - Redistributions in binary form must reproduce the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer in the documentation and/or other materials
+ *        provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#ifndef SOC_NPS_MTM_H
+#define SOC_NPS_MTM_H
+
+#define CTOP_INST_HWSCHD_OFF_R3                 0x3B6F00BF
+#define CTOP_INST_HWSCHD_RESTORE_R3             0x3E6F70C3
+
+static inline void hw_schd_save(unsigned int *flags)
+{
+	__asm__ __volatile__(
+	"       .word %1\n"
+	"       st r3,[%0]\n"
+	:
+	: "r"(flags), "i"(CTOP_INST_HWSCHD_OFF_R3)
+	: "r3", "memory");
+}
+
+static inline void hw_schd_restore(unsigned int flags)
+{
+	__asm__ __volatile__(
+	"       mov r3, %0\n"
+	"       .word %1\n"
+	:
+	: "r"(flags), "i"(CTOP_INST_HWSCHD_RESTORE_R3)
+	: "r3");
+}
+
+#endif /* SOC_NPS_MTM_H */