power: supply: bq24190_charger: Remove extcon handling

Now that drivers/i2c/busses/i2c-cht-wc.c uses
"input-current-limit-from-supplier" instead of "extcon-name" the last
user of the bq24190 extcon code is gone, remove it.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>

drivers/power/supply/bq24190_charger.c

@@ -11,7 +11,6 @@
 #include <linux/module.h>
 #include <linux/interrupt.h>
 #include <linux/delay.h>
-#include <linux/extcon.h>
 #include <linux/of_irq.h>
 #include <linux/of_device.h>
 #include <linux/pm_runtime.h>
@@ -162,9 +161,6 @@ struct bq24190_dev_info {
 	struct device			*dev;
 	struct power_supply		*charger;
 	struct power_supply		*battery;
-	struct extcon_dev		*extcon;
-	struct notifier_block		extcon_nb;
-	struct delayed_work		extcon_work;
 	struct delayed_work		input_current_limit_work;
 	char				model_name[I2C_NAME_SIZE];
 	bool				initialized;
@@ -686,6 +682,16 @@ static int bq24190_register_reset(struct bq24190_dev_info *bdi)
 	int ret, limit = 100;
 	u8 v;
 
+	/*
+	 * This prop. can be passed on device instantiation from platform code:
+	 * struct property_entry pe[] =
+	 *   { PROPERTY_ENTRY_BOOL("disable-reset"), ... };
+	 * struct i2c_board_info bi =
+	 *   { .type = "bq24190", .addr = 0x6b, .properties = pe, .irq = irq };
+	 * struct i2c_adapter ad = { ... };
+	 * i2c_add_adapter(&ad);
+	 * i2c_new_device(&ad, &bi);
+	 */
 	if (device_property_read_bool(bdi->dev, "disable-reset"))
 		return 0;
 
@@ -1623,75 +1629,6 @@ static irqreturn_t bq24190_irq_handler_thread(int irq, void *data)
 	return IRQ_HANDLED;
 }
 
-static void bq24190_extcon_work(struct work_struct *work)
-{
-	struct bq24190_dev_info *bdi =
-		container_of(work, struct bq24190_dev_info, extcon_work.work);
-	int error, iinlim = 0;
-	u8 v;
-
-	error = pm_runtime_get_sync(bdi->dev);
-	if (error < 0) {
-		dev_warn(bdi->dev, "pm_runtime_get failed: %i\n", error);
-		pm_runtime_put_noidle(bdi->dev);
-		return;
-	}
-
-	if      (extcon_get_state(bdi->extcon, EXTCON_CHG_USB_SDP) == 1)
-		iinlim =  500000;
-	else if (extcon_get_state(bdi->extcon, EXTCON_CHG_USB_CDP) == 1 ||
-		 extcon_get_state(bdi->extcon, EXTCON_CHG_USB_ACA) == 1)
-		iinlim = 1500000;
-	else if (extcon_get_state(bdi->extcon, EXTCON_CHG_USB_DCP) == 1)
-		iinlim = 2000000;
-
-	if (iinlim) {
-		error = bq24190_set_field_val(bdi, BQ24190_REG_ISC,
-					      BQ24190_REG_ISC_IINLIM_MASK,
-					      BQ24190_REG_ISC_IINLIM_SHIFT,
-					      bq24190_isc_iinlim_values,
-					      ARRAY_SIZE(bq24190_isc_iinlim_values),
-					      iinlim);
-		if (error < 0)
-			dev_err(bdi->dev, "Can't set IINLIM: %d\n", error);
-	}
-
-	/* if no charger found and in USB host mode, set OTG 5V boost, else normal */
-	if (!iinlim && extcon_get_state(bdi->extcon, EXTCON_USB_HOST) == 1)
-		v = BQ24190_REG_POC_CHG_CONFIG_OTG;
-	else
-		v = BQ24190_REG_POC_CHG_CONFIG_CHARGE;
-
-	error = bq24190_write_mask(bdi, BQ24190_REG_POC,
-				   BQ24190_REG_POC_CHG_CONFIG_MASK,
-				   BQ24190_REG_POC_CHG_CONFIG_SHIFT,
-				   v);
-	if (error < 0)
-		dev_err(bdi->dev, "Can't set CHG_CONFIG: %d\n", error);
-
-	pm_runtime_mark_last_busy(bdi->dev);
-	pm_runtime_put_autosuspend(bdi->dev);
-}
-
-static int bq24190_extcon_event(struct notifier_block *nb, unsigned long event,
-				void *param)
-{
-	struct bq24190_dev_info *bdi =
-		container_of(nb, struct bq24190_dev_info, extcon_nb);
-
-	/*
-	 * The Power-Good detection may take up to 220ms, sometimes
-	 * the external charger detection is quicker, and the bq24190 will
-	 * reset to iinlim based on its own charger detection (which is not
-	 * hooked up when using external charger detection) resulting in
-	 * a too low default 500mA iinlim. Delay applying the extcon value
-	 * for 300ms to avoid this.
-	 */
-	queue_delayed_work(system_wq, &bdi->extcon_work, msecs_to_jiffies(300));
-
-	return NOTIFY_OK;
-}
-
 static int bq24190_hw_init(struct bq24190_dev_info *bdi)
 {
 	u8 v;
@@ -1766,7 +1703,6 @@ static int bq24190_probe(struct i2c_client *client,
 	struct device *dev = &client->dev;
 	struct power_supply_config charger_cfg = {}, battery_cfg = {};
 	struct bq24190_dev_info *bdi;
-	const char *name;
 	int ret;
 
 	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
@@ -1796,25 +1732,6 @@ static int bq24190_probe(struct i2c_client *client,
 		return -EINVAL;
 	}
 
-	/*
-	 * Devicetree platforms should get extcon via phandle (not yet supported).
-	 * On ACPI platforms, extcon clients may invoke us with:
-	 * struct property_entry pe[] =
-	 *   { PROPERTY_ENTRY_STRING("extcon-name", client_name), ... };
-	 * struct i2c_board_info bi =
-	 *   { .type = "bq24190", .addr = 0x6b, .properties = pe, .irq = irq };
-	 * struct i2c_adapter ad = { ... };
-	 * i2c_add_adapter(&ad);
-	 * i2c_new_device(&ad, &bi);
-	 */
-	if (device_property_read_string(dev, "extcon-name", &name) == 0) {
-		bdi->extcon = extcon_get_extcon_dev(name);
-		if (!bdi->extcon)
-			return -EPROBE_DEFER;
-
-		dev_info(bdi->dev, "using extcon device %s\n", name);
-	}
-
 	pm_runtime_enable(dev);
 	pm_runtime_use_autosuspend(dev);
 	pm_runtime_set_autosuspend_delay(dev, 600);
@@ -1882,20 +1799,6 @@ static int bq24190_probe(struct i2c_client *client,
 	if (ret < 0)
 		goto out_sysfs;
 
-	if (bdi->extcon) {
-		INIT_DELAYED_WORK(&bdi->extcon_work, bq24190_extcon_work);
-		bdi->extcon_nb.notifier_call = bq24190_extcon_event;
-		ret = devm_extcon_register_notifier_all(dev, bdi->extcon,
-							&bdi->extcon_nb);
-		if (ret) {
-			dev_err(dev, "Can't register extcon\n");
-			goto out_sysfs;
-		}
-
-		/* Sync initial cable state */
-		queue_delayed_work(system_wq, &bdi->extcon_work, 0);
-	}
-
 	enable_irq_wake(client->irq);
 
 	pm_runtime_mark_last_busy(dev);