qla2xxx: Add debugging info for MBX timeout.

Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: James Bottomley <JBottomley@Odin.com>

drivers/scsi/qla2xxx/qla_dbg.c

@@ -11,9 +11,9 @@
  * ----------------------------------------------------------------------
  * |             Level            |   Last Value Used  |     Holes	|
  * ----------------------------------------------------------------------
- * | Module Init and Probe        |       0x017d       | 0x0144,0x0146	|
+ * | Module Init and Probe        |       0x017f       | 0x0146         |
  * |                              |                    | 0x015b-0x0160	|
- * |                              |                    | 0x016e-0x0170	|
+ * |                              |                    | 0x016e-0x0170  |
  * | Mailbox commands             |       0x118d       | 0x1115-0x1116	|
  * |                              |                    | 0x111a-0x111b  |
  * | Device Discovery             |       0x2016       | 0x2020-0x2022, |

drivers/scsi/qla2xxx/qla_def.h

@@ -3300,6 +3300,8 @@ struct qla_hw_data {
 #define RISC_RDY_AFT_RESET	3
 #define RISC_SRAM_DUMP_CMPL	4
 #define RISC_EXT_MEM_DUMP_CMPL	5
+#define ISP_MBX_RDY		6
+#define ISP_SOFT_RESET_CMPL	7
 	int		fw_dump_reading;
 	int		prev_minidump_failed;
 	dma_addr_t	eft_dma;

drivers/scsi/qla2xxx/qla_init.c

@@ -1121,7 +1121,7 @@ qla81xx_reset_mpi(scsi_qla_host_t *vha)
  *
  * Returns 0 on success.
  */
-static inline void
+static inline int
 qla24xx_reset_risc(scsi_qla_host_t *vha)
 {
 	unsigned long flags = 0;
@@ -1130,6 +1130,7 @@ qla24xx_reset_risc(scsi_qla_host_t *vha)
 	uint32_t cnt, d2;
 	uint16_t wd;
 	static int abts_cnt; /* ISP abort retry counts */
+	int rval = QLA_SUCCESS;
 
 	spin_lock_irqsave(&ha->hardware_lock, flags);
 
@@ -1142,26 +1143,57 @@ qla24xx_reset_risc(scsi_qla_host_t *vha)
 		udelay(10);
 	}
 
+	if (!(RD_REG_DWORD(&reg->ctrl_status) & CSRX_DMA_ACTIVE))
+		set_bit(DMA_SHUTDOWN_CMPL, &ha->fw_dump_cap_flags);
+
+	ql_dbg(ql_dbg_init + ql_dbg_verbose, vha, 0x017e,
+	    "HCCR: 0x%x, Control Status %x, DMA active status:0x%x\n",
+	    RD_REG_DWORD(&reg->hccr),
+	    RD_REG_DWORD(&reg->ctrl_status),
+	    (RD_REG_DWORD(&reg->ctrl_status) & CSRX_DMA_ACTIVE));
+
 	WRT_REG_DWORD(&reg->ctrl_status,
 	    CSRX_ISP_SOFT_RESET|CSRX_DMA_SHUTDOWN|MWB_4096_BYTES);
 	pci_read_config_word(ha->pdev, PCI_COMMAND, &wd);
 
 	udelay(100);
+
 	/* Wait for firmware to complete NVRAM accesses. */
 	d2 = (uint32_t) RD_REG_WORD(&reg->mailbox0);
-	for (cnt = 10000 ; cnt && d2; cnt--) {
-		udelay(5);
-		d2 = (uint32_t) RD_REG_WORD(&reg->mailbox0);
+	for (cnt = 10000; RD_REG_WORD(&reg->mailbox0) != 0 &&
+	    rval == QLA_SUCCESS; cnt--) {
 		barrier();
+		if (cnt)
+			udelay(5);
+		else
+			rval = QLA_FUNCTION_TIMEOUT;
 	}
 
+	if (rval == QLA_SUCCESS)
+		set_bit(ISP_MBX_RDY, &ha->fw_dump_cap_flags);
+
+	ql_dbg(ql_dbg_init + ql_dbg_verbose, vha, 0x017f,
+	    "HCCR: 0x%x, MailBox0 Status 0x%x\n",
+	    RD_REG_DWORD(&reg->hccr),
+	    RD_REG_DWORD(&reg->mailbox0));
+
 	/* Wait for soft-reset to complete. */
 	d2 = RD_REG_DWORD(&reg->ctrl_status);
-	for (cnt = 6000000 ; cnt && (d2 & CSRX_ISP_SOFT_RESET); cnt--) {
-		udelay(5);
-		d2 = RD_REG_DWORD(&reg->ctrl_status);
+	for (cnt = 0; cnt < 6000000; cnt++) {
 		barrier();
+		if ((RD_REG_DWORD(&reg->ctrl_status) &
+		    CSRX_ISP_SOFT_RESET) == 0)
+			break;
+
+		udelay(5);
 	}
+	if (!(RD_REG_DWORD(&reg->ctrl_status) & CSRX_ISP_SOFT_RESET))
+		set_bit(ISP_SOFT_RESET_CMPL, &ha->fw_dump_cap_flags);
+
+	ql_dbg(ql_dbg_init + ql_dbg_verbose, vha, 0x015d,
+	    "HCCR: 0x%x, Soft Reset status: 0x%x\n",
+	    RD_REG_DWORD(&reg->hccr),
+	    RD_REG_DWORD(&reg->ctrl_status));
 
 	/* If required, do an MPI FW reset now */
 	if (test_and_clear_bit(MPI_RESET_NEEDED, &vha->dpc_flags)) {
@@ -1190,16 +1222,32 @@ qla24xx_reset_risc(scsi_qla_host_t *vha)
 	RD_REG_DWORD(&reg->hccr);
 
 	d2 = (uint32_t) RD_REG_WORD(&reg->mailbox0);
-	for (cnt = 6000000 ; cnt && d2; cnt--) {
-		udelay(5);
-		d2 = (uint32_t) RD_REG_WORD(&reg->mailbox0);
+	for (cnt = 6000000; RD_REG_WORD(&reg->mailbox0) != 0 &&
+	    rval == QLA_SUCCESS; cnt--) {
 		barrier();
+		if (cnt)
+			udelay(5);
+		else
+			rval = QLA_FUNCTION_TIMEOUT;
 	}
+	if (rval == QLA_SUCCESS)
+		set_bit(RISC_RDY_AFT_RESET, &ha->fw_dump_cap_flags);
+
+	ql_dbg(ql_dbg_init + ql_dbg_verbose, vha, 0x015e,
+	    "Host Risc 0x%x, mailbox0 0x%x\n",
+	    RD_REG_DWORD(&reg->hccr),
+	     RD_REG_WORD(&reg->mailbox0));
 
 	spin_unlock_irqrestore(&ha->hardware_lock, flags);
 
+	ql_dbg(ql_dbg_init + ql_dbg_verbose, vha, 0x015f,
+	    "Driver in %s mode\n",
+	    IS_NOPOLLING_TYPE(ha) ? "Interrupt" : "Polling");
+
 	if (IS_NOPOLLING_TYPE(ha))
 		ha->isp_ops->enable_intrs(ha);
+
+	return rval;
 }
 
 static void

drivers/scsi/qla2xxx/qla_mbx.c

@@ -33,7 +33,7 @@
 static int
 qla2x00_mailbox_command(scsi_qla_host_t *vha, mbx_cmd_t *mcp)
 {
-	int		rval;
+	int		rval, i;
 	unsigned long    flags = 0;
 	device_reg_t *reg;
 	uint8_t		abort_active;
@@ -43,10 +43,12 @@ qla2x00_mailbox_command(scsi_qla_host_t *vha, mbx_cmd_t *mcp)
 	uint16_t __iomem *optr;
 	uint32_t	cnt;
 	uint32_t	mboxes;
+	uint16_t __iomem *mbx_reg;
 	unsigned long	wait_time;
 	struct qla_hw_data *ha = vha->hw;
 	scsi_qla_host_t *base_vha = pci_get_drvdata(ha->pdev);
 
+
 	ql_dbg(ql_dbg_mbx, vha, 0x1000, "Entered %s.\n", __func__);
 
 	if (ha->pdev->error_state > pci_channel_io_frozen) {
@@ -376,6 +378,18 @@ mbx_done:
 		ql_dbg(ql_dbg_disc, base_vha, 0x1020,
 		    "**** Failed mbx[0]=%x, mb[1]=%x, mb[2]=%x, mb[3]=%x, cmd=%x ****.\n",
 		    mcp->mb[0], mcp->mb[1], mcp->mb[2], mcp->mb[3], command);
+
+		ql_dbg(ql_dbg_disc, vha, 0x1115,
+		    "host status: 0x%x, flags:0x%lx, intr ctrl reg:0x%x, intr status:0x%x\n",
+		    RD_REG_DWORD(&reg->isp24.host_status),
+		    ha->fw_dump_cap_flags,
+		    RD_REG_DWORD(&reg->isp24.ictrl),
+		    RD_REG_DWORD(&reg->isp24.istatus));
+
+		mbx_reg = &reg->isp24.mailbox0;
+		for (i = 0; i < 6; i++)
+			ql_dbg(ql_dbg_disc + ql_dbg_verbose, vha, 0x1116,
+			    "mbox[%d] 0x%04x\n", i, RD_REG_WORD(mbx_reg++));
 	} else {
 		ql_dbg(ql_dbg_mbx, base_vha, 0x1021, "Done %s.\n", __func__);
 	}