Просмотр исходного кода

Merge remote-tracking branches 'spi/topic/adi-v3', 'spi/topic/atmel', 'spi/topic/cleanup' and 'spi/topic/davinci' into spi-next

Mark Brown 11 лет назад
Родитель
Сommit
d1345c524e

+ 8 - 1
Documentation/devicetree/bindings/spi/spi-davinci.txt

@@ -8,7 +8,8 @@ Required properties:
 	- "ti,dm6441-spi" for SPI used similar to that on DM644x SoC family
 	- "ti,da830-spi" for SPI used similar to that on DA8xx SoC family
 - reg: Offset and length of SPI controller register space
-- num-cs: Number of chip selects
+- num-cs: Number of chip selects. This includes internal as well as
+	GPIO chip selects.
 - ti,davinci-spi-intr-line: interrupt line used to connect the SPI
 	IP to the interrupt controller within the SoC. Possible values
 	are 0 and 1. Manual says one of the two possible interrupt
@@ -17,6 +18,12 @@ Required properties:
 - interrupts: interrupt number mapped to CPU.
 - clocks: spi clk phandle
 
+Optional:
+- cs-gpios: gpio chip selects
+	For example to have 3 internal CS and 2 GPIO CS, user could define
+	cs-gpios = <0>, <0>, <0>, <&gpio1 30 0>, <&gpio1 31 0>;
+	where first three are internal CS and last two are GPIO CS.
+
 Example of a NOR flash slave device (n25q032) connected to DaVinci
 SPI controller device over the SPI bus.
 

+ 2 - 3
drivers/spi/spi-adi-v3.c

@@ -660,10 +660,9 @@ static int adi_spi_setup(struct spi_device *spi)
 		struct adi_spi3_chip *chip_info = spi->controller_data;
 
 		chip = kzalloc(sizeof(*chip), GFP_KERNEL);
-		if (!chip) {
-			dev_err(&spi->dev, "can not allocate chip data\n");
+		if (!chip)
 			return -ENOMEM;
-		}
+
 		if (chip_info) {
 			if (chip_info->control & ~ctl_reg) {
 				dev_err(&spi->dev,

+ 8 - 14
drivers/spi/spi-atmel.c

@@ -597,21 +597,15 @@ static int atmel_spi_next_xfer_dma_submit(struct spi_master *master,
 		goto err_exit;
 
 	/* Send both scatterlists */
-	rxdesc = rxchan->device->device_prep_slave_sg(rxchan,
-					&as->dma.sgrx,
-					1,
-					DMA_FROM_DEVICE,
-					DMA_PREP_INTERRUPT | DMA_CTRL_ACK,
-					NULL);
+	rxdesc = dmaengine_prep_slave_sg(rxchan, &as->dma.sgrx, 1,
+					 DMA_FROM_DEVICE,
+					 DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
 	if (!rxdesc)
 		goto err_dma;
 
-	txdesc = txchan->device->device_prep_slave_sg(txchan,
-					&as->dma.sgtx,
-					1,
-					DMA_TO_DEVICE,
-					DMA_PREP_INTERRUPT | DMA_CTRL_ACK,
-					NULL);
+	txdesc = dmaengine_prep_slave_sg(txchan, &as->dma.sgtx, 1,
+					 DMA_TO_DEVICE,
+					 DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
 	if (!txdesc)
 		goto err_dma;
 
@@ -1018,7 +1012,7 @@ static int atmel_spi_setup(struct spi_device *spi)
 	csr |= SPI_BF(DLYBCT, 0);
 
 	/* chipselect must have been muxed as GPIO (e.g. in board setup) */
-	npcs_pin = (unsigned int)spi->controller_data;
+	npcs_pin = (unsigned long)spi->controller_data;
 
 	if (gpio_is_valid(spi->cs_gpio))
 		npcs_pin = spi->cs_gpio;
@@ -1253,7 +1247,7 @@ msg_done:
 static void atmel_spi_cleanup(struct spi_device *spi)
 {
 	struct atmel_spi_device	*asd = spi->controller_state;
-	unsigned		gpio = (unsigned) spi->controller_data;
+	unsigned		gpio = (unsigned long) spi->controller_data;
 
 	if (!asd)
 		return;

+ 1 - 1
drivers/spi/spi-cadence.c

@@ -664,7 +664,7 @@ static int __maybe_unused cdns_spi_resume(struct device *dev)
 static SIMPLE_DEV_PM_OPS(cdns_spi_dev_pm_ops, cdns_spi_suspend,
 			 cdns_spi_resume);
 
-static struct of_device_id cdns_spi_of_match[] = {
+static const struct of_device_id cdns_spi_of_match[] = {
 	{ .compatible = "xlnx,zynq-spi-r1p6" },
 	{ .compatible = "cdns,spi-r1p6" },
 	{ /* end of table */ }

+ 0 - 2
drivers/spi/spi-clps711x.c

@@ -184,8 +184,6 @@ static int spi_clps711x_probe(struct platform_device *pdev)
 	}
 	master->max_speed_hz = clk_get_rate(hw->spi_clk);
 
-	platform_set_drvdata(pdev, master);
-
 	hw->syscon = syscon_regmap_lookup_by_pdevname("syscon.3");
 	if (IS_ERR(hw->syscon)) {
 		ret = PTR_ERR(hw->syscon);

+ 53 - 19
drivers/spi/spi-davinci.c

@@ -30,6 +30,7 @@
 #include <linux/edma.h>
 #include <linux/of.h>
 #include <linux/of_device.h>
+#include <linux/of_gpio.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/spi_bitbang.h>
 #include <linux/slab.h>
@@ -38,8 +39,6 @@
 
 #define SPI_NO_RESOURCE		((resource_size_t)-1)
 
-#define SPI_MAX_CHIPSELECT	2
-
 #define CS_DEFAULT	0xFF
 
 #define SPIFMT_PHASE_MASK	BIT(16)
@@ -142,7 +141,7 @@ struct davinci_spi {
 	void			(*get_rx)(u32 rx_data, struct davinci_spi *);
 	u32			(*get_tx)(struct davinci_spi *);
 
-	u8			bytes_per_word[SPI_MAX_CHIPSELECT];
+	u8			*bytes_per_word;
 };
 
 static struct davinci_spi_config davinci_spi_default_cfg;
@@ -213,13 +212,16 @@ static void davinci_spi_chipselect(struct spi_device *spi, int value)
 	u8 chip_sel = spi->chip_select;
 	u16 spidat1 = CS_DEFAULT;
 	bool gpio_chipsel = false;
+	int gpio;
 
 	dspi = spi_master_get_devdata(spi->master);
 	pdata = &dspi->pdata;
 
-	if (pdata->chip_sel && chip_sel < pdata->num_chipselect &&
-				pdata->chip_sel[chip_sel] != SPI_INTERN_CS)
+	if (spi->cs_gpio >= 0) {
+		/* SPI core parse and update master->cs_gpio */
 		gpio_chipsel = true;
+		gpio = spi->cs_gpio;
+	}
 
 	/*
 	 * Board specific chip select logic decides the polarity and cs
@@ -227,9 +229,9 @@ static void davinci_spi_chipselect(struct spi_device *spi, int value)
 	 */
 	if (gpio_chipsel) {
 		if (value == BITBANG_CS_ACTIVE)
-			gpio_set_value(pdata->chip_sel[chip_sel], 0);
+			gpio_set_value(gpio, spi->mode & SPI_CS_HIGH);
 		else
-			gpio_set_value(pdata->chip_sel[chip_sel], 1);
+			gpio_set_value(gpio, !(spi->mode & SPI_CS_HIGH));
 	} else {
 		if (value == BITBANG_CS_ACTIVE) {
 			spidat1 |= SPIDAT1_CSHOLD_MASK;
@@ -392,17 +394,40 @@ static int davinci_spi_setup(struct spi_device *spi)
 	int retval = 0;
 	struct davinci_spi *dspi;
 	struct davinci_spi_platform_data *pdata;
+	struct spi_master *master = spi->master;
+	struct device_node *np = spi->dev.of_node;
+	bool internal_cs = true;
+	unsigned long flags = GPIOF_DIR_OUT;
 
 	dspi = spi_master_get_devdata(spi->master);
 	pdata = &dspi->pdata;
 
+	flags |= (spi->mode & SPI_CS_HIGH) ? GPIOF_INIT_LOW : GPIOF_INIT_HIGH;
+
 	if (!(spi->mode & SPI_NO_CS)) {
-		if ((pdata->chip_sel == NULL) ||
-		    (pdata->chip_sel[spi->chip_select] == SPI_INTERN_CS))
-			set_io_bits(dspi->base + SPIPC0, 1 << spi->chip_select);
+		if (np && (master->cs_gpios != NULL) && (spi->cs_gpio >= 0)) {
+			retval = gpio_request_one(spi->cs_gpio,
+						  flags, dev_name(&spi->dev));
+			internal_cs = false;
+		} else if (pdata->chip_sel &&
+			   spi->chip_select < pdata->num_chipselect &&
+			   pdata->chip_sel[spi->chip_select] != SPI_INTERN_CS) {
+			spi->cs_gpio = pdata->chip_sel[spi->chip_select];
+			retval = gpio_request_one(spi->cs_gpio,
+						  flags, dev_name(&spi->dev));
+			internal_cs = false;
+		}
+	}
 
+	if (retval) {
+		dev_err(&spi->dev, "GPIO %d setup failed (%d)\n",
+			spi->cs_gpio, retval);
+		return retval;
 	}
 
+	if (internal_cs)
+		set_io_bits(dspi->base + SPIPC0, 1 << spi->chip_select);
+
 	if (spi->mode & SPI_READY)
 		set_io_bits(dspi->base + SPIPC0, SPIPC0_SPIENA_MASK);
 
@@ -414,6 +439,12 @@ static int davinci_spi_setup(struct spi_device *spi)
 	return retval;
 }
 
+static void davinci_spi_cleanup(struct spi_device *spi)
+{
+	if (spi->cs_gpio >= 0)
+		gpio_free(spi->cs_gpio);
+}
+
 static int davinci_spi_check_error(struct davinci_spi *dspi, int int_status)
 {
 	struct device *sdev = dspi->bitbang.master->dev.parent;
@@ -812,6 +843,8 @@ static int spi_davinci_get_pdata(struct platform_device *pdev,
 
 	/*
 	 * default num_cs is 1 and all chipsel are internal to the chip
+	 * indicated by chip_sel being NULL or cs_gpios being NULL or
+	 * set to -ENOENT. num-cs includes internal as well as gpios.
 	 * indicated by chip_sel being NULL. GPIO based CS is not
 	 * supported yet in DT bindings.
 	 */
@@ -850,7 +883,7 @@ static int davinci_spi_probe(struct platform_device *pdev)
 	struct resource *r;
 	resource_size_t dma_rx_chan = SPI_NO_RESOURCE;
 	resource_size_t	dma_tx_chan = SPI_NO_RESOURCE;
-	int i = 0, ret = 0;
+	int ret = 0;
 	u32 spipc0;
 
 	master = spi_alloc_master(&pdev->dev, sizeof(struct davinci_spi));
@@ -876,6 +909,14 @@ static int davinci_spi_probe(struct platform_device *pdev)
 	/* pdata in dspi is now updated and point pdata to that */
 	pdata = &dspi->pdata;
 
+	dspi->bytes_per_word = devm_kzalloc(&pdev->dev,
+					    sizeof(*dspi->bytes_per_word) *
+					    pdata->num_chipselect, GFP_KERNEL);
+	if (dspi->bytes_per_word == NULL) {
+		ret = -ENOMEM;
+		goto free_master;
+	}
+
 	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (r == NULL) {
 		ret = -ENOENT;
@@ -915,6 +956,7 @@ static int davinci_spi_probe(struct platform_device *pdev)
 	master->num_chipselect = pdata->num_chipselect;
 	master->bits_per_word_mask = SPI_BPW_RANGE_MASK(2, 16);
 	master->setup = davinci_spi_setup;
+	master->cleanup = davinci_spi_cleanup;
 
 	dspi->bitbang.chipselect = davinci_spi_chipselect;
 	dspi->bitbang.setup_transfer = davinci_spi_setup_transfer;
@@ -962,14 +1004,6 @@ static int davinci_spi_probe(struct platform_device *pdev)
 	spipc0 = SPIPC0_DIFUN_MASK | SPIPC0_DOFUN_MASK | SPIPC0_CLKFUN_MASK;
 	iowrite32(spipc0, dspi->base + SPIPC0);
 
-	/* initialize chip selects */
-	if (pdata->chip_sel) {
-		for (i = 0; i < pdata->num_chipselect; i++) {
-			if (pdata->chip_sel[i] != SPI_INTERN_CS)
-				gpio_direction_output(pdata->chip_sel[i], 1);
-		}
-	}
-
 	if (pdata->intr_line)
 		iowrite32(SPI_INTLVL_1, dspi->base + SPILVL);
 	else

+ 0 - 2
drivers/spi/spi-falcon.c

@@ -425,8 +425,6 @@ static int falcon_sflash_probe(struct platform_device *pdev)
 	master->unprepare_transfer_hardware = falcon_sflash_unprepare_xfer;
 	master->dev.of_node = pdev->dev.of_node;
 
-	platform_set_drvdata(pdev, priv);
-
 	ret = devm_spi_register_master(&pdev->dev, master);
 	if (ret)
 		spi_master_put(master);

+ 1 - 1
drivers/spi/spi-fsl-spi.c

@@ -58,7 +58,7 @@ static struct fsl_spi_match_data of_fsl_spi_grlib_config = {
 	.type = TYPE_GRLIB,
 };
 
-static struct of_device_id of_fsl_spi_match[] = {
+static const struct of_device_id of_fsl_spi_match[] = {
 	{
 		.compatible = "fsl,spi",
 		.data = &of_fsl_spi_fsl_config,

+ 0 - 2
drivers/spi/spi-omap-100k.c

@@ -420,8 +420,6 @@ static int omap1_spi100k_probe(struct platform_device *pdev)
 	master->min_speed_hz = OMAP1_SPI100K_MAX_FREQ/(1<<16);
 	master->max_speed_hz = OMAP1_SPI100K_MAX_FREQ;
 
-	platform_set_drvdata(pdev, master);
-
 	spi100k = spi_master_get_devdata(master);
 
 	/*

+ 1 - 1
drivers/spi/spi-sh-hspi.c

@@ -304,7 +304,7 @@ static int hspi_remove(struct platform_device *pdev)
 	return 0;
 }
 
-static struct of_device_id hspi_of_match[] = {
+static const struct of_device_id hspi_of_match[] = {
 	{ .compatible = "renesas,hspi", },
 	{ /* sentinel */ }
 };

+ 0 - 2
drivers/spi/spi-sh-msiof.c

@@ -680,8 +680,6 @@ static int sh_msiof_spi_probe(struct platform_device *pdev)
 
 	p = spi_master_get_devdata(master);
 
-	platform_set_drvdata(pdev, p);
-
 	of_id = of_match_device(sh_msiof_match, &pdev->dev);
 	if (of_id) {
 		p->chipdata = of_id->data;