Merge tag 'devel-omap-device-for-v3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/soc

Kevin Hilman <khilman@ti.com>:

Updates for omap_device layer for v3.7.

Allows omap_device layer to keep track of driver bound status in order
to make more intelligent decisions about idling unused devices.

* tag 'devel-omap-device-for-v3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: OMAP: omap_device: idle devices with no driver bound
  ARM: OMAP: omap_device: don't attempt late suspend if no driver bound
  ARM: OMAP: omap_device: keep track of driver bound status
  + sync to 3.6-rc5

Documentation/ABI/testing/sysfs-bus-pci

@@ -210,3 +210,15 @@ Users:
 		firmware assigned instance number of the PCI
 		device that can help in understanding the firmware
 		intended order of the PCI device.
+
+What:		/sys/bus/pci/devices/.../d3cold_allowed
+Date:		July 2012
+Contact:	Huang Ying <ying.huang@intel.com>
+Description:
+		d3cold_allowed is bit to control whether the corresponding PCI
+		device can be put into D3Cold state.  If it is cleared, the
+		device will never be put into D3Cold state.  If it is set, the
+		device may be put into D3Cold state if other requirements are
+		satisfied too.  Reading this attribute will show the current
+		value of d3cold_allowed bit.  Writing this attribute will set
+		the value of d3cold_allowed bit.

Documentation/feature-removal-schedule.txt

@@ -579,7 +579,7 @@ Why:	KVM tracepoints provide mostly equivalent information in a much more
 ----------------------------
 
 What:	at91-mci driver ("CONFIG_MMC_AT91")
-When:	3.7
+When:	3.8
 Why:	There are two mci drivers: at91-mci and atmel-mci. The PDC support
 	was added to atmel-mci as a first step to support more chips.
 	Then at91-mci was kept only for old IP versions (on at91rm9200 and

Makefile

@@ -1,7 +1,7 @@
 VERSION = 3
 PATCHLEVEL = 6
 SUBLEVEL = 0
-EXTRAVERSION = -rc4
+EXTRAVERSION = -rc5
 NAME = Saber-toothed Squirrel
 
 # *DOCUMENTATION*

arch/arm/Kconfig

@@ -6,7 +6,7 @@ config ARM
 	select HAVE_DMA_API_DEBUG
 	select HAVE_IDE if PCI || ISA || PCMCIA
 	select HAVE_DMA_ATTRS
-	select HAVE_DMA_CONTIGUOUS if (CPU_V6 || CPU_V6K || CPU_V7)
+	select HAVE_DMA_CONTIGUOUS if MMU
 	select HAVE_MEMBLOCK
 	select RTC_LIB
 	select SYS_SUPPORTS_APM_EMULATION

arch/arm/boot/dts/at91sam9g25ek.dts

@@ -15,7 +15,7 @@
 	compatible = "atmel,at91sam9g25ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9";
 
 	chosen {
-		bootargs = "128M console=ttyS0,115200 root=/dev/mtdblock1 rw rootfstype=ubifs ubi.mtd=1 root=ubi0:rootfs";
+		bootargs = "console=ttyS0,115200 root=/dev/mtdblock1 rw rootfstype=ubifs ubi.mtd=1 root=ubi0:rootfs";
 	};
 
 	ahb {

arch/arm/configs/armadillo800eva_defconfig

@@ -33,7 +33,7 @@ CONFIG_AEABI=y
 CONFIG_FORCE_MAX_ZONEORDER=13
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=tty0 console=ttySC1,115200 earlyprintk=sh-sci.1,115200 ignore_loglevel root=/dev/nfs ip=dhcp nfsroot=,rsize=4096,wsize=4096"
+CONFIG_CMDLINE="console=tty0 console=ttySC1,115200 earlyprintk=sh-sci.1,115200 ignore_loglevel root=/dev/nfs ip=dhcp nfsroot=,rsize=4096,wsize=4096 rw"
 CONFIG_CMDLINE_FORCE=y
 CONFIG_KEXEC=y
 CONFIG_VFP=y

arch/arm/include/asm/dma-mapping.h

@@ -202,6 +202,13 @@ static inline void dma_free_writecombine(struct device *dev, size_t size,
 	return dma_free_attrs(dev, size, cpu_addr, dma_handle, &attrs);
 }
 
+/*
+ * This can be called during early boot to increase the size of the atomic
+ * coherent DMA pool above the default value of 256KiB. It must be called
+ * before postcore_initcall.
+ */
+extern void __init init_dma_coherent_pool_size(unsigned long size);
+
 /*
  * This can be called during boot to increase the size of the consistent
  * DMA region above it's default value of 2MB. It must be called before the

arch/arm/mach-at91/at91rm9200_time.c

@@ -197,7 +197,7 @@ void __init at91rm9200_timer_init(void)
 	at91_st_read(AT91_ST_SR);
 
 	/* Make IRQs happen for the system timer */
-	setup_irq(AT91_ID_SYS, &at91rm9200_timer_irq);
+	setup_irq(NR_IRQS_LEGACY + AT91_ID_SYS, &at91rm9200_timer_irq);
 
 	/* The 32KiHz "Slow Clock" (tick every 30517.58 nanoseconds) is used
 	 * directly for the clocksource and all clockevents, after adjusting

arch/arm/mach-at91/at91sam9260_devices.c

@@ -726,6 +726,8 @@ static struct resource rtt_resources[] = {
 		.flags	= IORESOURCE_MEM,
 	}, {
 		.flags	= IORESOURCE_MEM,
+	}, {
+		.flags  = IORESOURCE_IRQ,
 	},
 };
 
@@ -744,10 +746,12 @@ static void __init at91_add_device_rtt_rtc(void)
 	 * The second resource is needed:
 	 * GPBR will serve as the storage for RTC time offset
 	 */
-	at91sam9260_rtt_device.num_resources = 2;
+	at91sam9260_rtt_device.num_resources = 3;
 	rtt_resources[1].start = AT91SAM9260_BASE_GPBR +
 				 4 * CONFIG_RTC_DRV_AT91SAM9_GPBR;
 	rtt_resources[1].end = rtt_resources[1].start + 3;
+	rtt_resources[2].start = NR_IRQS_LEGACY + AT91_ID_SYS;
+	rtt_resources[2].end = NR_IRQS_LEGACY + AT91_ID_SYS;
 }
 #else
 static void __init at91_add_device_rtt_rtc(void)

arch/arm/mach-at91/at91sam9261_devices.c

@@ -609,6 +609,8 @@ static struct resource rtt_resources[] = {
 		.flags	= IORESOURCE_MEM,
 	}, {
 		.flags	= IORESOURCE_MEM,
+	}, {
+		.flags  = IORESOURCE_IRQ,
 	}
 };
 
@@ -626,10 +628,12 @@ static void __init at91_add_device_rtt_rtc(void)
 	 * The second resource is needed:
 	 * GPBR will serve as the storage for RTC time offset
 	 */
-	at91sam9261_rtt_device.num_resources = 2;
+	at91sam9261_rtt_device.num_resources = 3;
 	rtt_resources[1].start = AT91SAM9261_BASE_GPBR +
 				 4 * CONFIG_RTC_DRV_AT91SAM9_GPBR;
 	rtt_resources[1].end = rtt_resources[1].start + 3;
+	rtt_resources[2].start = NR_IRQS_LEGACY + AT91_ID_SYS;
+	rtt_resources[2].end = NR_IRQS_LEGACY + AT91_ID_SYS;
 }
 #else
 static void __init at91_add_device_rtt_rtc(void)

arch/arm/mach-at91/at91sam9263_devices.c

@@ -990,6 +990,8 @@ static struct resource rtt0_resources[] = {
 		.flags	= IORESOURCE_MEM,
 	}, {
 		.flags	= IORESOURCE_MEM,
+	}, {
+		.flags  = IORESOURCE_IRQ,
 	}
 };
 
@@ -1006,6 +1008,8 @@ static struct resource rtt1_resources[] = {
 		.flags	= IORESOURCE_MEM,
 	}, {
 		.flags	= IORESOURCE_MEM,
+	}, {
+		.flags  = IORESOURCE_IRQ,
 	}
 };
 
@@ -1027,14 +1031,14 @@ static void __init at91_add_device_rtt_rtc(void)
 		 * The second resource is needed only for the chosen RTT:
 		 * GPBR will serve as the storage for RTC time offset
 		 */
-		at91sam9263_rtt0_device.num_resources = 2;
+		at91sam9263_rtt0_device.num_resources = 3;
 		at91sam9263_rtt1_device.num_resources = 1;
 		pdev = &at91sam9263_rtt0_device;
 		r = rtt0_resources;
 		break;
 	case 1:
 		at91sam9263_rtt0_device.num_resources = 1;
-		at91sam9263_rtt1_device.num_resources = 2;
+		at91sam9263_rtt1_device.num_resources = 3;
 		pdev = &at91sam9263_rtt1_device;
 		r = rtt1_resources;
 		break;
@@ -1047,6 +1051,8 @@ static void __init at91_add_device_rtt_rtc(void)
 	pdev->name = "rtc-at91sam9";
 	r[1].start = AT91SAM9263_BASE_GPBR + 4 * CONFIG_RTC_DRV_AT91SAM9_GPBR;
 	r[1].end = r[1].start + 3;
+	r[2].start = NR_IRQS_LEGACY + AT91_ID_SYS;
+	r[2].end = NR_IRQS_LEGACY + AT91_ID_SYS;
 }
 #else
 static void __init at91_add_device_rtt_rtc(void)

arch/arm/mach-at91/at91sam9g45_devices.c

@@ -1293,6 +1293,8 @@ static struct resource rtt_resources[] = {
 		.flags	= IORESOURCE_MEM,
 	}, {
 		.flags	= IORESOURCE_MEM,
+	}, {
+		.flags  = IORESOURCE_IRQ,
 	}
 };
 
@@ -1310,10 +1312,12 @@ static void __init at91_add_device_rtt_rtc(void)
 	 * The second resource is needed:
 	 * GPBR will serve as the storage for RTC time offset
 	 */
-	at91sam9g45_rtt_device.num_resources = 2;
+	at91sam9g45_rtt_device.num_resources = 3;
 	rtt_resources[1].start = AT91SAM9G45_BASE_GPBR +
 				 4 * CONFIG_RTC_DRV_AT91SAM9_GPBR;
 	rtt_resources[1].end = rtt_resources[1].start + 3;
+	rtt_resources[2].start = NR_IRQS_LEGACY + AT91_ID_SYS;
+	rtt_resources[2].end = NR_IRQS_LEGACY + AT91_ID_SYS;
 }
 #else
 static void __init at91_add_device_rtt_rtc(void)

arch/arm/mach-at91/at91sam9rl_devices.c

@@ -688,6 +688,8 @@ static struct resource rtt_resources[] = {
 		.flags	= IORESOURCE_MEM,
 	}, {
 		.flags	= IORESOURCE_MEM,
+	}, {
+		.flags  = IORESOURCE_IRQ,
 	}
 };
 
@@ -705,10 +707,12 @@ static void __init at91_add_device_rtt_rtc(void)
 	 * The second resource is needed:
 	 * GPBR will serve as the storage for RTC time offset
 	 */
-	at91sam9rl_rtt_device.num_resources = 2;
+	at91sam9rl_rtt_device.num_resources = 3;
 	rtt_resources[1].start = AT91SAM9RL_BASE_GPBR +
 				 4 * CONFIG_RTC_DRV_AT91SAM9_GPBR;
 	rtt_resources[1].end = rtt_resources[1].start + 3;
+	rtt_resources[2].start = NR_IRQS_LEGACY + AT91_ID_SYS;
+	rtt_resources[2].end = NR_IRQS_LEGACY + AT91_ID_SYS;
 }
 #else
 static void __init at91_add_device_rtt_rtc(void)

arch/arm/mach-at91/clock.c

@@ -63,6 +63,12 @@ EXPORT_SYMBOL_GPL(at91_pmc_base);
 
 #define cpu_has_300M_plla()	(cpu_is_at91sam9g10())
 
+#define cpu_has_240M_plla()	(cpu_is_at91sam9261() \
+				|| cpu_is_at91sam9263() \
+				|| cpu_is_at91sam9rl())
+
+#define cpu_has_210M_plla()	(cpu_is_at91sam9260())
+
 #define cpu_has_pllb()		(!(cpu_is_at91sam9rl() \
 				|| cpu_is_at91sam9g45() \
 				|| cpu_is_at91sam9x5() \
@@ -706,6 +712,12 @@ static int __init at91_pmc_init(unsigned long main_clock)
 	} else if (cpu_has_800M_plla()) {
 		if (plla.rate_hz > 800000000)
 			pll_overclock = true;
+	} else if (cpu_has_240M_plla()) {
+		if (plla.rate_hz > 240000000)
+			pll_overclock = true;
+	} else if (cpu_has_210M_plla()) {
+		if (plla.rate_hz > 210000000)
+			pll_overclock = true;
 	} else {
 		if (plla.rate_hz > 209000000)
 			pll_overclock = true;

arch/arm/mach-gemini/irq.c

@@ -17,6 +17,7 @@
 #include <linux/sched.h>
 #include <asm/irq.h>
 #include <asm/mach/irq.h>
+#include <asm/system_misc.h>
 #include <mach/hardware.h>
 
 #define IRQ_SOURCE(base_addr)	(base_addr + 0x00)

arch/arm/mach-kirkwood/common.c

@@ -517,6 +517,13 @@ void __init kirkwood_wdt_init(void)
 void __init kirkwood_init_early(void)
 {
 	orion_time_set_base(TIMER_VIRT_BASE);
+
+	/*
+	 * Some Kirkwood devices allocate their coherent buffers from atomic
+	 * context. Increase size of atomic coherent pool to make sure such
+	 * the allocations won't fail.
+	 */
+	init_dma_coherent_pool_size(SZ_1M);
 }
 
 int kirkwood_tclk;

arch/arm/mach-kirkwood/db88f6281-bp-setup.c

@@ -10,6 +10,7 @@
 
 #include <linux/kernel.h>
 #include <linux/init.h>
+#include <linux/sizes.h>
 #include <linux/platform_device.h>
 #include <linux/mtd/partitions.h>
 #include <linux/ata_platform.h>

arch/arm/mach-shmobile/board-armadillo800eva.c

@@ -520,13 +520,14 @@ static struct platform_device hdmi_lcdc_device = {
 };
 
 /* GPIO KEY */
-#define GPIO_KEY(c, g, d) { .code = c, .gpio = g, .desc = d, .active_low = 1 }
+#define GPIO_KEY(c, g, d, ...) \
+	{ .code = c, .gpio = g, .desc = d, .active_low = 1, __VA_ARGS__ }
 
 static struct gpio_keys_button gpio_buttons[] = {
-	GPIO_KEY(KEY_POWER,	GPIO_PORT99,	"SW1"),
-	GPIO_KEY(KEY_BACK,	GPIO_PORT100,	"SW2"),
-	GPIO_KEY(KEY_MENU,	GPIO_PORT97,	"SW3"),
-	GPIO_KEY(KEY_HOME,	GPIO_PORT98,	"SW4"),
+	GPIO_KEY(KEY_POWER,	GPIO_PORT99,	"SW3", .wakeup = 1),
+	GPIO_KEY(KEY_BACK,	GPIO_PORT100,	"SW4"),
+	GPIO_KEY(KEY_MENU,	GPIO_PORT97,	"SW5"),
+	GPIO_KEY(KEY_HOME,	GPIO_PORT98,	"SW6"),
 };
 
 static struct gpio_keys_platform_data gpio_key_info = {
@@ -901,8 +902,8 @@ static struct platform_device *eva_devices[] __initdata = {
 	&camera_device,
 	&ceu0_device,
 	&fsi_device,
-	&fsi_hdmi_device,
 	&fsi_wm8978_device,
+	&fsi_hdmi_device,
 };
 
 static void __init eva_clock_init(void)

arch/arm/mach-shmobile/board-mackerel.c

@@ -695,6 +695,7 @@ static struct platform_device usbhs0_device = {
  *  - J30 "open"
  *  - modify usbhs1_get_id() USBHS_HOST -> USBHS_GADGET
  *  - add .get_vbus = usbhs_get_vbus in usbhs1_private
+ *  - check usbhs0_device(pio)/usbhs1_device(irq) order in mackerel_devices.
  */
 #define IRQ8 evt2irq(0x0300)
 #define USB_PHY_MODE		(1 << 4)
@@ -1325,8 +1326,8 @@ static struct platform_device *mackerel_devices[] __initdata = {
 	&nor_flash_device,
 	&smc911x_device,
 	&lcdc_device,
-	&usbhs1_device,
 	&usbhs0_device,
+	&usbhs1_device,
 	&leds_device,
 	&fsi_device,
 	&fsi_ak4643_device,

arch/arm/mach-shmobile/board-marzen.c

@@ -67,7 +67,7 @@ static struct smsc911x_platform_config smsc911x_platdata = {
 
 static struct platform_device eth_device = {
 	.name		= "smsc911x",
-	.id		= 0,
+	.id		= -1,
 	.dev  = {
 		.platform_data = &smsc911x_platdata,
 	},

arch/arm/mach-shmobile/intc-sh73a0.c

@@ -259,9 +259,9 @@ static int sh73a0_set_wake(struct irq_data *data, unsigned int on)
 	return 0; /* always allow wakeup */
 }
 
-#define RELOC_BASE 0x1000
+#define RELOC_BASE 0x1200
 
-/* INTCA IRQ pins at INTCS + 0x1000 to make space for GIC+INTC handling */
+/* INTCA IRQ pins at INTCS + RELOC_BASE to make space for GIC+INTC handling */
 #define INTCS_VECT_RELOC(n, vect) INTCS_VECT((n), (vect) + RELOC_BASE)
 
 INTC_IRQ_PINS_32(intca_irq_pins, 0xe6900000,

arch/arm/mm/dma-mapping.c

@@ -267,17 +267,19 @@ static void __dma_free_remap(void *cpu_addr, size_t size)
 	vunmap(cpu_addr);
 }
 
+#define DEFAULT_DMA_COHERENT_POOL_SIZE	SZ_256K
+
 struct dma_pool {
 	size_t size;
 	spinlock_t lock;
 	unsigned long *bitmap;
 	unsigned long nr_pages;
 	void *vaddr;
-	struct page *page;
+	struct page **pages;
 };
 
 static struct dma_pool atomic_pool = {
-	.size = SZ_256K,
+	.size = DEFAULT_DMA_COHERENT_POOL_SIZE,
 };
 
 static int __init early_coherent_pool(char *p)
@@ -287,6 +289,21 @@ static int __init early_coherent_pool(char *p)
 }
 early_param("coherent_pool", early_coherent_pool);
 
+void __init init_dma_coherent_pool_size(unsigned long size)
+{
+	/*
+	 * Catch any attempt to set the pool size too late.
+	 */
+	BUG_ON(atomic_pool.vaddr);
+
+	/*
+	 * Set architecture specific coherent pool size only if
+	 * it has not been changed by kernel command line parameter.
+	 */
+	if (atomic_pool.size == DEFAULT_DMA_COHERENT_POOL_SIZE)
+		atomic_pool.size = size;
+}
+
 /*
  * Initialise the coherent pool for atomic allocations.
  */
@@ -297,6 +314,7 @@ static int __init atomic_pool_init(void)
 	unsigned long nr_pages = pool->size >> PAGE_SHIFT;
 	unsigned long *bitmap;
 	struct page *page;
+	struct page **pages;
 	void *ptr;
 	int bitmap_size = BITS_TO_LONGS(nr_pages) * sizeof(long);
 
@@ -304,21 +322,31 @@ static int __init atomic_pool_init(void)
 	if (!bitmap)
 		goto no_bitmap;
 
+	pages = kzalloc(nr_pages * sizeof(struct page *), GFP_KERNEL);
+	if (!pages)
+		goto no_pages;
+
 	if (IS_ENABLED(CONFIG_CMA))
 		ptr = __alloc_from_contiguous(NULL, pool->size, prot, &page);
 	else
 		ptr = __alloc_remap_buffer(NULL, pool->size, GFP_KERNEL, prot,
 					   &page, NULL);
 	if (ptr) {
+		int i;
+
+		for (i = 0; i < nr_pages; i++)
+			pages[i] = page + i;
+
 		spin_lock_init(&pool->lock);
 		pool->vaddr = ptr;
-		pool->page = page;
+		pool->pages = pages;
 		pool->bitmap = bitmap;
 		pool->nr_pages = nr_pages;
 		pr_info("DMA: preallocated %u KiB pool for atomic coherent allocations\n",
 		       (unsigned)pool->size / 1024);
 		return 0;
 	}
+no_pages:
 	kfree(bitmap);
 no_bitmap:
 	pr_err("DMA: failed to allocate %u KiB pool for atomic coherent allocation\n",
@@ -443,27 +471,45 @@ static void *__alloc_from_pool(size_t size, struct page **ret_page)
 	if (pageno < pool->nr_pages) {
 		bitmap_set(pool->bitmap, pageno, count);
 		ptr = pool->vaddr + PAGE_SIZE * pageno;
-		*ret_page = pool->page + pageno;
+		*ret_page = pool->pages[pageno];
+	} else {
+		pr_err_once("ERROR: %u KiB atomic DMA coherent pool is too small!\n"
+			    "Please increase it with coherent_pool= kernel parameter!\n",
+			    (unsigned)pool->size / 1024);
 	}
 	spin_unlock_irqrestore(&pool->lock, flags);
 
 	return ptr;
 }
 
+static bool __in_atomic_pool(void *start, size_t size)
+{
+	struct dma_pool *pool = &atomic_pool;
+	void *end = start + size;
+	void *pool_start = pool->vaddr;
+	void *pool_end = pool->vaddr + pool->size;
+
+	if (start < pool_start || start > pool_end)
+		return false;
+
+	if (end <= pool_end)
+		return true;
+
+	WARN(1, "Wrong coherent size(%p-%p) from atomic pool(%p-%p)\n",
+	     start, end - 1, pool_start, pool_end - 1);
+
+	return false;
+}
+
 static int __free_from_pool(void *start, size_t size)
 {
 	struct dma_pool *pool = &atomic_pool;
 	unsigned long pageno, count;
 	unsigned long flags;
 
-	if (start < pool->vaddr || start > pool->vaddr + pool->size)
+	if (!__in_atomic_pool(start, size))
 		return 0;
 
-	if (start + size > pool->vaddr + pool->size) {
-		WARN(1, "freeing wrong coherent size from pool\n");
-		return 0;
-	}
-
 	pageno = (start - pool->vaddr) >> PAGE_SHIFT;
 	count = size >> PAGE_SHIFT;
 
@@ -1090,10 +1136,22 @@ static int __iommu_remove_mapping(struct device *dev, dma_addr_t iova, size_t si
 	return 0;
 }
 
+static struct page **__atomic_get_pages(void *addr)
+{
+	struct dma_pool *pool = &atomic_pool;
+	struct page **pages = pool->pages;
+	int offs = (addr - pool->vaddr) >> PAGE_SHIFT;
+
+	return pages + offs;
+}
+
 static struct page **__iommu_get_pages(void *cpu_addr, struct dma_attrs *attrs)
 {
 	struct vm_struct *area;
 
+	if (__in_atomic_pool(cpu_addr, PAGE_SIZE))
+		return __atomic_get_pages(cpu_addr);
+
 	if (dma_get_attr(DMA_ATTR_NO_KERNEL_MAPPING, attrs))
 		return cpu_addr;
 
@@ -1103,6 +1161,34 @@ static struct page **__iommu_get_pages(void *cpu_addr, struct dma_attrs *attrs)
 	return NULL;
 }
 
+static void *__iommu_alloc_atomic(struct device *dev, size_t size,
+				  dma_addr_t *handle)
+{
+	struct page *page;
+	void *addr;
+
+	addr = __alloc_from_pool(size, &page);
+	if (!addr)
+		return NULL;
+
+	*handle = __iommu_create_mapping(dev, &page, size);
+	if (*handle == DMA_ERROR_CODE)
+		goto err_mapping;
+
+	return addr;
+
+err_mapping:
+	__free_from_pool(addr, size);
+	return NULL;
+}
+
+static void __iommu_free_atomic(struct device *dev, struct page **pages,
+				dma_addr_t handle, size_t size)
+{
+	__iommu_remove_mapping(dev, handle, size);
+	__free_from_pool(page_address(pages[0]), size);
+}
+
 static void *arm_iommu_alloc_attrs(struct device *dev, size_t size,
 	    dma_addr_t *handle, gfp_t gfp, struct dma_attrs *attrs)
 {
@@ -1113,6 +1199,9 @@ static void *arm_iommu_alloc_attrs(struct device *dev, size_t size,
 	*handle = DMA_ERROR_CODE;
 	size = PAGE_ALIGN(size);
 
+	if (gfp & GFP_ATOMIC)
+		return __iommu_alloc_atomic(dev, size, handle);
+
 	pages = __iommu_alloc_buffer(dev, size, gfp);
 	if (!pages)
 		return NULL;
@@ -1179,6 +1268,11 @@ void arm_iommu_free_attrs(struct device *dev, size_t size, void *cpu_addr,
 		return;
 	}
 
+	if (__in_atomic_pool(cpu_addr, size)) {
+		__iommu_free_atomic(dev, pages, handle, size);
+		return;
+	}
+
 	if (!dma_get_attr(DMA_ATTR_NO_KERNEL_MAPPING, attrs)) {
 		unmap_kernel_range((unsigned long)cpu_addr, size);
 		vunmap(cpu_addr);

arch/arm/plat-omap/include/plat/omap_device.h

@@ -60,6 +60,7 @@ extern struct dev_pm_domain omap_device_pm_domain;
  * @_dev_wakeup_lat_limit: dev wakeup latency limit in nsec - set by OMAP PM
  * @_state: one of OMAP_DEVICE_STATE_* (see above)
  * @flags: device flags
+ * @_driver_status: one of BUS_NOTIFY_*_DRIVER from <linux/device.h>
  *
  * Integrates omap_hwmod data into Linux platform_device.
  *
@@ -73,6 +74,7 @@ struct omap_device {
 	struct omap_device_pm_latency	*pm_lats;
 	u32				dev_wakeup_lat;
 	u32				_dev_wakeup_lat_limit;
+	unsigned long			_driver_status;
 	u8				pm_lats_cnt;
 	s8				pm_lat_level;
 	u8				hwmods_cnt;

arch/arm/plat-omap/omap_device.c

@@ -385,17 +385,21 @@ static int _omap_device_notifier_call(struct notifier_block *nb,
 				      unsigned long event, void *dev)
 {
 	struct platform_device *pdev = to_platform_device(dev);
+	struct omap_device *od;
 
 	switch (event) {
-	case BUS_NOTIFY_ADD_DEVICE:
-		if (pdev->dev.of_node)
-			omap_device_build_from_dt(pdev);
-		break;
-
 	case BUS_NOTIFY_DEL_DEVICE:
 		if (pdev->archdata.od)
 			omap_device_delete(pdev->archdata.od);
 		break;
+	case BUS_NOTIFY_ADD_DEVICE:
+		if (pdev->dev.of_node)
+			omap_device_build_from_dt(pdev);
+		/* fall through */
+	default:
+		od = to_omap_device(pdev);
+		if (od)
+			od->_driver_status = event;
 	}
 
 	return NOTIFY_DONE;
@@ -752,6 +756,10 @@ static int _od_suspend_noirq(struct device *dev)
 	struct omap_device *od = to_omap_device(pdev);
 	int ret;
 
+	/* Don't attempt late suspend on a driver that is not bound */
+	if (od->_driver_status != BUS_NOTIFY_BOUND_DRIVER)
+		return 0;
+
 	ret = pm_generic_suspend_noirq(dev);
 
 	if (!ret && !pm_runtime_status_suspended(dev)) {
@@ -1125,3 +1133,41 @@ static int __init omap_device_init(void)
 	return 0;
 }
 core_initcall(omap_device_init);
+
+/**
+ * omap_device_late_idle - idle devices without drivers
+ * @dev: struct device * associated with omap_device
+ * @data: unused
+ *
+ * Check the driver bound status of this device, and idle it
+ * if there is no driver attached.
+ */
+static int __init omap_device_late_idle(struct device *dev, void *data)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct omap_device *od = to_omap_device(pdev);
+
+	if (!od)
+		return 0;
+
+	/*
+	 * If omap_device state is enabled, but has no driver bound,
+	 * idle it.
+	 */
+	if (od->_driver_status != BUS_NOTIFY_BOUND_DRIVER) {
+		if (od->_state == OMAP_DEVICE_STATE_ENABLED) {
+			dev_warn(dev, "%s: enabled but no driver.  Idling\n",
+				 __func__);
+			omap_device_idle(pdev);
+		}
+	}
+
+	return 0;
+}
+
+static int __init omap_device_late_init(void)
+{
+	bus_for_each_dev(&platform_bus_type, NULL, NULL, omap_device_late_idle);
+	return 0;
+}
+late_initcall(omap_device_late_init);

arch/powerpc/include/asm/processor.h

@@ -386,6 +386,7 @@ extern unsigned long cpuidle_disable;
 enum idle_boot_override {IDLE_NO_OVERRIDE = 0, IDLE_POWERSAVE_OFF};
 
 extern int powersave_nap;	/* set if nap mode can be used in idle loop */
+extern void power7_nap(void);
 
 #ifdef CONFIG_PSERIES_IDLE
 extern void update_smt_snooze_delay(int snooze);

arch/powerpc/kernel/asm-offsets.c

@@ -76,6 +76,7 @@ int main(void)
 	DEFINE(SIGSEGV, SIGSEGV);
 	DEFINE(NMI_MASK, NMI_MASK);
 	DEFINE(THREAD_DSCR, offsetof(struct thread_struct, dscr));
+	DEFINE(THREAD_DSCR_INHERIT, offsetof(struct thread_struct, dscr_inherit));
 #else
 	DEFINE(THREAD_INFO, offsetof(struct task_struct, stack));
 #endif /* CONFIG_PPC64 */

arch/powerpc/kernel/dbell.c

@@ -28,6 +28,8 @@ void doorbell_setup_this_cpu(void)
 
 void doorbell_cause_ipi(int cpu, unsigned long data)
 {
+	/* Order previous accesses vs. msgsnd, which is treated as a store */
+	mb();
 	ppc_msgsnd(PPC_DBELL, 0, data);
 }
 

arch/powerpc/kernel/entry_64.S

@@ -370,6 +370,12 @@ _GLOBAL(ret_from_fork)
 	li	r3,0
 	b	syscall_exit
 
+	.section	".toc","aw"
+DSCR_DEFAULT:
+	.tc dscr_default[TC],dscr_default
+
+	.section	".text"
+
 /*
  * This routine switches between two different tasks.  The process
  * state of one is saved on its kernel stack.  Then the state
@@ -509,9 +515,6 @@ END_MMU_FTR_SECTION_IFSET(MMU_FTR_1T_SEGMENT)
 	mr	r1,r8		/* start using new stack pointer */
 	std	r7,PACAKSAVE(r13)
 
-	ld	r6,_CCR(r1)
-	mtcrf	0xFF,r6
-
 #ifdef CONFIG_ALTIVEC
 BEGIN_FTR_SECTION
 	ld	r0,THREAD_VRSAVE(r4)
@@ -520,14 +523,22 @@ END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
 #endif /* CONFIG_ALTIVEC */
 #ifdef CONFIG_PPC64
 BEGIN_FTR_SECTION
+	lwz	r6,THREAD_DSCR_INHERIT(r4)
+	ld	r7,DSCR_DEFAULT@toc(2)
 	ld	r0,THREAD_DSCR(r4)
-	cmpd	r0,r25
-	beq	1f
+	cmpwi	r6,0
+	bne	1f
+	ld	r0,0(r7)
+1:	cmpd	r0,r25
+	beq	2f
 	mtspr	SPRN_DSCR,r0
-1:	
+2:
 END_FTR_SECTION_IFSET(CPU_FTR_DSCR)
 #endif
 
+	ld	r6,_CCR(r1)
+	mtcrf	0xFF,r6
+
 	/* r3-r13 are destroyed -- Cort */
 	REST_8GPRS(14, r1)
 	REST_10GPRS(22, r1)

arch/powerpc/kernel/exceptions-64s.S

@@ -186,7 +186,7 @@ hardware_interrupt_hv:
 	KVM_HANDLER_PR(PACA_EXGEN, EXC_STD, 0x800)
 
 	MASKABLE_EXCEPTION_PSERIES(0x900, 0x900, decrementer)
-	MASKABLE_EXCEPTION_HV(0x980, 0x982, decrementer)
+	STD_EXCEPTION_HV(0x980, 0x982, hdecrementer)
 
 	STD_EXCEPTION_PSERIES(0xa00, 0xa00, trap_0a)
 	KVM_HANDLER_PR(PACA_EXGEN, EXC_STD, 0xa00)
@@ -486,6 +486,7 @@ machine_check_common:
 
 	STD_EXCEPTION_COMMON_ASYNC(0x500, hardware_interrupt, do_IRQ)
 	STD_EXCEPTION_COMMON_ASYNC(0x900, decrementer, .timer_interrupt)
+	STD_EXCEPTION_COMMON(0x980, hdecrementer, .hdec_interrupt)
 	STD_EXCEPTION_COMMON(0xa00, trap_0a, .unknown_exception)
 	STD_EXCEPTION_COMMON(0xb00, trap_0b, .unknown_exception)
 	STD_EXCEPTION_COMMON(0xd00, single_step, .single_step_exception)

arch/powerpc/kernel/idle_power7.S

@@ -28,7 +28,9 @@ _GLOBAL(power7_idle)
 	lwz	r4,ADDROFF(powersave_nap)(r3)
 	cmpwi	0,r4,0
 	beqlr
+	/* fall through */
 
+_GLOBAL(power7_nap)
 	/* NAP is a state loss, we create a regs frame on the
 	 * stack, fill it up with the state we care about and
 	 * stick a pointer to it in PACAR1. We really only

arch/powerpc/kernel/process.c

@@ -802,16 +802,8 @@ int copy_thread(unsigned long clone_flags, unsigned long usp,
 #endif /* CONFIG_PPC_STD_MMU_64 */
 #ifdef CONFIG_PPC64 
 	if (cpu_has_feature(CPU_FTR_DSCR)) {
-		if (current->thread.dscr_inherit) {
-			p->thread.dscr_inherit = 1;
-			p->thread.dscr = current->thread.dscr;
-		} else if (0 != dscr_default) {
-			p->thread.dscr_inherit = 1;
-			p->thread.dscr = dscr_default;
-		} else {
-			p->thread.dscr_inherit = 0;
-			p->thread.dscr = 0;
-		}
+		p->thread.dscr_inherit = current->thread.dscr_inherit;
+		p->thread.dscr = current->thread.dscr;
 	}
 #endif
 

arch/powerpc/kernel/smp.c

@@ -198,8 +198,15 @@ void smp_muxed_ipi_message_pass(int cpu, int msg)
 	struct cpu_messages *info = &per_cpu(ipi_message, cpu);
 	char *message = (char *)&info->messages;
 
+	/*
+	 * Order previous accesses before accesses in the IPI handler.
+	 */
+	smp_mb();
 	message[msg] = 1;
-	mb();
+	/*
+	 * cause_ipi functions are required to include a full barrier
+	 * before doing whatever causes the IPI.
+	 */
 	smp_ops->cause_ipi(cpu, info->data);
 }
 
@@ -211,7 +218,7 @@ irqreturn_t smp_ipi_demux(void)
 	mb();	/* order any irq clear */
 
 	do {
-		all = xchg_local(&info->messages, 0);
+		all = xchg(&info->messages, 0);
 
 #ifdef __BIG_ENDIAN
 		if (all & (1 << (24 - 8 * PPC_MSG_CALL_FUNCTION)))

arch/powerpc/kernel/sysfs.c

@@ -194,6 +194,14 @@ static ssize_t show_dscr_default(struct device *dev,
 	return sprintf(buf, "%lx\n", dscr_default);
 }
 
+static void update_dscr(void *dummy)
+{
+	if (!current->thread.dscr_inherit) {
+		current->thread.dscr = dscr_default;
+		mtspr(SPRN_DSCR, dscr_default);
+	}
+}
+
 static ssize_t __used store_dscr_default(struct device *dev,
 		struct device_attribute *attr, const char *buf,
 		size_t count)
@@ -206,6 +214,8 @@ static ssize_t __used store_dscr_default(struct device *dev,
 		return -EINVAL;
 	dscr_default = val;
 
+	on_each_cpu(update_dscr, NULL, 1);
+
 	return count;
 }
 

arch/powerpc/kernel/time.c

@@ -535,6 +535,15 @@ void timer_interrupt(struct pt_regs * regs)
 	trace_timer_interrupt_exit(regs);
 }
 
+/*
+ * Hypervisor decrementer interrupts shouldn't occur but are sometimes
+ * left pending on exit from a KVM guest.  We don't need to do anything
+ * to clear them, as they are edge-triggered.
+ */
+void hdec_interrupt(struct pt_regs *regs)
+{
+}
+
 #ifdef CONFIG_SUSPEND
 static void generic_suspend_disable_irqs(void)
 {

arch/powerpc/kernel/traps.c

@@ -972,8 +972,9 @@ static int emulate_instruction(struct pt_regs *regs)
 			cpu_has_feature(CPU_FTR_DSCR)) {
 		PPC_WARN_EMULATED(mtdscr, regs);
 		rd = (instword >> 21) & 0x1f;
-		mtspr(SPRN_DSCR, regs->gpr[rd]);
+		current->thread.dscr = regs->gpr[rd];
 		current->thread.dscr_inherit = 1;
+		mtspr(SPRN_DSCR, current->thread.dscr);
 		return 0;
 	}
 #endif

arch/powerpc/lib/code-patching.c

@@ -20,7 +20,7 @@ int patch_instruction(unsigned int *addr, unsigned int instr)
 {
 	int err;
 
-	err = __put_user(instr, addr);
+	__put_user_size(instr, addr, 4, err);
 	if (err)
 		return err;
 	asm ("dcbst 0, %0; sync; icbi 0,%0; sync; isync" : : "r" (addr));

arch/powerpc/mm/numa.c

@@ -1436,11 +1436,11 @@ static long vphn_get_associativity(unsigned long cpu,
 
 /*
  * Update the node maps and sysfs entries for each cpu whose home node
- * has changed.
+ * has changed. Returns 1 when the topology has changed, and 0 otherwise.
  */
 int arch_update_cpu_topology(void)
 {
-	int cpu, nid, old_nid;
+	int cpu, nid, old_nid, changed = 0;
 	unsigned int associativity[VPHN_ASSOC_BUFSIZE] = {0};
 	struct device *dev;
 
@@ -1466,9 +1466,10 @@ int arch_update_cpu_topology(void)
 		dev = get_cpu_device(cpu);
 		if (dev)
 			kobject_uevent(&dev->kobj, KOBJ_CHANGE);
+		changed = 1;
 	}
 
-	return 1;
+	return changed;
 }
 
 static void topology_work_fn(struct work_struct *work)

arch/powerpc/platforms/powernv/smp.c

@@ -106,14 +106,6 @@ static void pnv_smp_cpu_kill_self(void)
 {
 	unsigned int cpu;
 
-	/* If powersave_nap is enabled, use NAP mode, else just
-	 * spin aimlessly
-	 */
-	if (!powersave_nap) {
-		generic_mach_cpu_die();
-		return;
-	}
-
 	/* Standard hot unplug procedure */
 	local_irq_disable();
 	idle_task_exit();
@@ -128,7 +120,7 @@ static void pnv_smp_cpu_kill_self(void)
 	 */
 	mtspr(SPRN_LPCR, mfspr(SPRN_LPCR) & ~(u64)LPCR_PECE1);
 	while (!generic_check_cpu_restart(cpu)) {
-		power7_idle();
+		power7_nap();
 		if (!generic_check_cpu_restart(cpu)) {
 			DBG("CPU%d Unexpected exit while offline !\n", cpu);
 			/* We may be getting an IPI, so we re-enable

arch/powerpc/sysdev/xics/icp-hv.c

@@ -65,7 +65,11 @@ static inline void icp_hv_set_xirr(unsigned int value)
 static inline void icp_hv_set_qirr(int n_cpu , u8 value)
 {
 	int hw_cpu = get_hard_smp_processor_id(n_cpu);
-	long rc = plpar_hcall_norets(H_IPI, hw_cpu, value);
+	long rc;
+
+	/* Make sure all previous accesses are ordered before IPI sending */
+	mb();
+	rc = plpar_hcall_norets(H_IPI, hw_cpu, value);
 	if (rc != H_SUCCESS) {
 		pr_err("%s: bad return code qirr cpu=%d hw_cpu=%d mfrr=0x%x "
 			"returned %ld\n", __func__, n_cpu, hw_cpu, value, rc);

arch/um/os-Linux/time.c

@@ -114,7 +114,7 @@ static void deliver_alarm(void)
 	skew += this_tick - last_tick;
 
 	while (skew >= one_tick) {
-		alarm_handler(SIGVTALRM, NULL);
+		alarm_handler(SIGVTALRM, NULL, NULL);
 		skew -= one_tick;
 	}
 

arch/x86/xen/mmu.c

@@ -1283,7 +1283,7 @@ static void xen_flush_tlb_others(const struct cpumask *cpus,
 	cpumask_clear_cpu(smp_processor_id(), to_cpumask(args->mask));
 
 	args->op.cmd = MMUEXT_TLB_FLUSH_MULTI;
-	if (start != TLB_FLUSH_ALL && (end - start) <= PAGE_SIZE) {
+	if (end != TLB_FLUSH_ALL && (end - start) <= PAGE_SIZE) {
 		args->op.cmd = MMUEXT_INVLPG_MULTI;
 		args->op.arg1.linear_addr = start;
 	}

arch/x86/xen/p2m.c

@@ -599,7 +599,7 @@ bool __init early_can_reuse_p2m_middle(unsigned long set_pfn, unsigned long set_
 	if (p2m_index(set_pfn))
 		return false;
 
-	for (pfn = 0; pfn <= MAX_DOMAIN_PAGES; pfn += P2M_PER_PAGE) {
+	for (pfn = 0; pfn < MAX_DOMAIN_PAGES; pfn += P2M_PER_PAGE) {
 		topidx = p2m_top_index(pfn);
 
 		if (!p2m_top[topidx])

drivers/base/dma-contiguous.c

@@ -250,7 +250,7 @@ int __init dma_declare_contiguous(struct device *dev, unsigned long size,
 		return -EINVAL;
 
 	/* Sanitise input arguments */
-	alignment = PAGE_SIZE << max(MAX_ORDER, pageblock_order);
+	alignment = PAGE_SIZE << max(MAX_ORDER - 1, pageblock_order);
 	base = ALIGN(base, alignment);
 	size = ALIGN(size, alignment);
 	limit &= ~(alignment - 1);

drivers/gpio/Kconfig

@@ -294,7 +294,7 @@ config GPIO_MAX732X_IRQ
 
 config GPIO_MC9S08DZ60
 	bool "MX35 3DS BOARD MC9S08DZ60 GPIO functions"
-	depends on I2C && MACH_MX35_3DS
+	depends on I2C=y && MACH_MX35_3DS
 	help
 	  Select this to enable the MC9S08DZ60 GPIO driver
 

drivers/gpio/gpio-em.c

@@ -247,9 +247,9 @@ static int __devinit em_gio_irq_domain_init(struct em_gio_priv *p)
 
 	p->irq_base = irq_alloc_descs(pdata->irq_base, 0,
 				      pdata->number_of_pins, numa_node_id());
-	if (IS_ERR_VALUE(p->irq_base)) {
+	if (p->irq_base < 0) {
 		dev_err(&pdev->dev, "cannot get irq_desc\n");
-		return -ENXIO;
+		return p->irq_base;
 	}
 	pr_debug("gio: hw base = %d, nr = %d, sw base = %d\n",
 		 pdata->gpio_base, pdata->number_of_pins, p->irq_base);

drivers/gpio/gpio-rdc321x.c

@@ -170,6 +170,7 @@ static int __devinit rdc321x_gpio_probe(struct platform_device *pdev)
 	rdc321x_gpio_dev->reg2_data_base = r->start + 0x4;
 
 	rdc321x_gpio_dev->chip.label = "rdc321x-gpio";
+	rdc321x_gpio_dev->chip.owner = THIS_MODULE;
 	rdc321x_gpio_dev->chip.direction_input = rdc_gpio_direction_input;
 	rdc321x_gpio_dev->chip.direction_output = rdc_gpio_config;
 	rdc321x_gpio_dev->chip.get = rdc_gpio_get_value;

drivers/gpio/gpiolib-of.c

@@ -82,7 +82,7 @@ int of_get_named_gpio_flags(struct device_node *np, const char *propname,
 	gpiochip_find(&gg_data, of_gpiochip_find_and_xlate);
 
 	of_node_put(gg_data.gpiospec.np);
-	pr_debug("%s exited with status %d\n", __func__, ret);
+	pr_debug("%s exited with status %d\n", __func__, gg_data.out_gpio);
 	return gg_data.out_gpio;
 }
 EXPORT_SYMBOL(of_get_named_gpio_flags);

drivers/hid/hid-core.c

@@ -996,7 +996,8 @@ static void hid_process_event(struct hid_device *hid, struct hid_field *field,
 	struct hid_driver *hdrv = hid->driver;
 	int ret;
 
-	hid_dump_input(hid, usage, value);
+	if (!list_empty(&hid->debug_list))
+		hid_dump_input(hid, usage, value);
 
 	if (hdrv && hdrv->event && hid_match_usage(hid, usage)) {
 		ret = hdrv->event(hid, field, usage, value);
@@ -1558,7 +1559,9 @@ static const struct hid_device_id hid_have_special_driver[] = {
 	{ HID_USB_DEVICE(USB_VENDOR_ID_KYE, USB_DEVICE_ID_KYE_EASYPEN_M610X) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_LABTEC, USB_DEVICE_ID_LABTEC_WIRELESS_KEYBOARD) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_LCPOWER, USB_DEVICE_ID_LCPOWER_LC1000 ) },
- 	{ HID_USB_DEVICE(USB_VENDOR_ID_LENOVO, USB_DEVICE_ID_LENOVO_TPKBD) },
+#if IS_ENABLED(CONFIG_HID_LENOVO_TPKBD)
+	{ HID_USB_DEVICE(USB_VENDOR_ID_LENOVO, USB_DEVICE_ID_LENOVO_TPKBD) },
+#endif
 	{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_MX3000_RECEIVER) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_S510_RECEIVER) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_S510_RECEIVER_2) },

drivers/hid/hid-logitech-dj.c

@@ -439,7 +439,7 @@ static int logi_dj_recv_query_paired_devices(struct dj_receiver_dev *djrcv_dev)
 	struct dj_report *dj_report;
 	int retval;
 
-	dj_report = kzalloc(sizeof(dj_report), GFP_KERNEL);
+	dj_report = kzalloc(sizeof(struct dj_report), GFP_KERNEL);
 	if (!dj_report)
 		return -ENOMEM;
 	dj_report->report_id = REPORT_ID_DJ_SHORT;
@@ -456,7 +456,7 @@ static int logi_dj_recv_switch_to_dj_mode(struct dj_receiver_dev *djrcv_dev,
 	struct dj_report *dj_report;
 	int retval;
 
-	dj_report = kzalloc(sizeof(dj_report), GFP_KERNEL);
+	dj_report = kzalloc(sizeof(struct dj_report), GFP_KERNEL);
 	if (!dj_report)
 		return -ENOMEM;
 	dj_report->report_id = REPORT_ID_DJ_SHORT;

drivers/hid/usbhid/hid-quirks.c

@@ -70,6 +70,7 @@ static const struct hid_blacklist {
 	{ USB_VENDOR_ID_CH, USB_DEVICE_ID_CH_AXIS_295, HID_QUIRK_NOGET },
 	{ USB_VENDOR_ID_DMI, USB_DEVICE_ID_DMI_ENC, HID_QUIRK_NOGET },
 	{ USB_VENDOR_ID_ELO, USB_DEVICE_ID_ELO_TS2700, HID_QUIRK_NOGET },
+	{ USB_VENDOR_ID_MGE, USB_DEVICE_ID_MGE_UPS, HID_QUIRK_NOGET },
 	{ USB_VENDOR_ID_PIXART, USB_DEVICE_ID_PIXART_OPTICAL_TOUCH_SCREEN, HID_QUIRK_NO_INIT_REPORTS },
 	{ USB_VENDOR_ID_PIXART, USB_DEVICE_ID_PIXART_OPTICAL_TOUCH_SCREEN1, HID_QUIRK_NO_INIT_REPORTS },
 	{ USB_VENDOR_ID_PIXART, USB_DEVICE_ID_PIXART_OPTICAL_TOUCH_SCREEN2, HID_QUIRK_NO_INIT_REPORTS },

drivers/input/keyboard/imx_keypad.c

@@ -358,6 +358,7 @@ static void imx_keypad_inhibit(struct imx_keypad *keypad)
 	/* Inhibit KDI and KRI interrupts. */
 	reg_val = readw(keypad->mmio_base + KPSR);
 	reg_val &= ~(KBD_STAT_KRIE | KBD_STAT_KDIE);
+	reg_val |= KBD_STAT_KPKR | KBD_STAT_KPKD;
 	writew(reg_val, keypad->mmio_base + KPSR);
 
 	/* Colums as open drain and disable all rows */
@@ -515,7 +516,9 @@ static int __devinit imx_keypad_probe(struct platform_device *pdev)
 	input_set_drvdata(input_dev, keypad);
 
 	/* Ensure that the keypad will stay dormant until opened */
+	clk_enable(keypad->clk);
 	imx_keypad_inhibit(keypad);
+	clk_disable(keypad->clk);
 
 	error = request_irq(irq, imx_keypad_irq_handler, 0,
 			    pdev->name, keypad);

drivers/input/serio/i8042-x86ia64io.h

@@ -176,6 +176,20 @@ static const struct dmi_system_id __initconst i8042_dmi_noloop_table[] = {
 			DMI_MATCH(DMI_PRODUCT_NAME, "Spring Peak"),
 		},
 	},
+	{
+		/* Gigabyte T1005 - defines wrong chassis type ("Other") */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "GIGABYTE"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "T1005"),
+		},
+	},
+	{
+		/* Gigabyte T1005M/P - defines wrong chassis type ("Other") */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "GIGABYTE"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "T1005M/P"),
+		},
+	},
 	{
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),

drivers/input/tablet/wacom_wac.c

@@ -1848,7 +1848,10 @@ static const struct wacom_features wacom_features_0x2A =
 	{ "Wacom Intuos5 M", WACOM_PKGLEN_INTUOS,  44704, 27940, 2047,
 	  63, INTUOS5, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES };
 static const struct wacom_features wacom_features_0xF4 =
-	{ "Wacom Cintiq 24HD",    WACOM_PKGLEN_INTUOS,   104480, 65600, 2047,
+	{ "Wacom Cintiq 24HD",       WACOM_PKGLEN_INTUOS,   104480, 65600, 2047,
+	  63, WACOM_24HD, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES };
+static const struct wacom_features wacom_features_0xF8 =
+	{ "Wacom Cintiq 24HD touch", WACOM_PKGLEN_INTUOS,   104480, 65600, 2047,
 	  63, WACOM_24HD, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES };
 static const struct wacom_features wacom_features_0x3F =
 	{ "Wacom Cintiq 21UX",    WACOM_PKGLEN_INTUOS,    87200, 65600, 1023,
@@ -2091,6 +2094,7 @@ const struct usb_device_id wacom_ids[] = {
 	{ USB_DEVICE_WACOM(0xEF) },
 	{ USB_DEVICE_WACOM(0x47) },
 	{ USB_DEVICE_WACOM(0xF4) },
+	{ USB_DEVICE_WACOM(0xF8) },
 	{ USB_DEVICE_WACOM(0xFA) },
 	{ USB_DEVICE_LENOVO(0x6004) },
 	{ }

drivers/input/touchscreen/edt-ft5x06.c

@@ -602,6 +602,7 @@ edt_ft5x06_ts_teardown_debugfs(struct edt_ft5x06_ts_data *tsdata)
 {
 	if (tsdata->debug_dir)
 		debugfs_remove_recursive(tsdata->debug_dir);
+	kfree(tsdata->raw_buffer);
 }
 
 #else
@@ -843,7 +844,6 @@ static int __devexit edt_ft5x06_ts_remove(struct i2c_client *client)
 	if (gpio_is_valid(pdata->reset_pin))
 		gpio_free(pdata->reset_pin);
 
-	kfree(tsdata->raw_buffer);
 	kfree(tsdata);
 
 	return 0;

drivers/mmc/card/block.c

@@ -1411,7 +1411,8 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req)
 		/* complete ongoing async transfer before issuing discard */
 		if (card->host->areq)
 			mmc_blk_issue_rw_rq(mq, NULL);
-		if (req->cmd_flags & REQ_SECURE)
+		if (req->cmd_flags & REQ_SECURE &&
+			!(card->quirks & MMC_QUIRK_SEC_ERASE_TRIM_BROKEN))
 			ret = mmc_blk_issue_secdiscard_rq(mq, req);
 		else
 			ret = mmc_blk_issue_discard_rq(mq, req);
@@ -1716,6 +1717,7 @@ force_ro_fail:
 #define CID_MANFID_SANDISK	0x2
 #define CID_MANFID_TOSHIBA	0x11
 #define CID_MANFID_MICRON	0x13
+#define CID_MANFID_SAMSUNG	0x15
 
 static const struct mmc_fixup blk_fixups[] =
 {
@@ -1752,6 +1754,28 @@ static const struct mmc_fixup blk_fixups[] =
 	MMC_FIXUP(CID_NAME_ANY, CID_MANFID_MICRON, 0x200, add_quirk_mmc,
 		  MMC_QUIRK_LONG_READ_TIME),
 
+	/*
+	 * On these Samsung MoviNAND parts, performing secure erase or
+	 * secure trim can result in unrecoverable corruption due to a
+	 * firmware bug.
+	 */
+	MMC_FIXUP("M8G2FA", CID_MANFID_SAMSUNG, CID_OEMID_ANY, add_quirk_mmc,
+		  MMC_QUIRK_SEC_ERASE_TRIM_BROKEN),
+	MMC_FIXUP("MAG4FA", CID_MANFID_SAMSUNG, CID_OEMID_ANY, add_quirk_mmc,
+		  MMC_QUIRK_SEC_ERASE_TRIM_BROKEN),
+	MMC_FIXUP("MBG8FA", CID_MANFID_SAMSUNG, CID_OEMID_ANY, add_quirk_mmc,
+		  MMC_QUIRK_SEC_ERASE_TRIM_BROKEN),
+	MMC_FIXUP("MCGAFA", CID_MANFID_SAMSUNG, CID_OEMID_ANY, add_quirk_mmc,
+		  MMC_QUIRK_SEC_ERASE_TRIM_BROKEN),
+	MMC_FIXUP("VAL00M", CID_MANFID_SAMSUNG, CID_OEMID_ANY, add_quirk_mmc,
+		  MMC_QUIRK_SEC_ERASE_TRIM_BROKEN),
+	MMC_FIXUP("VYL00M", CID_MANFID_SAMSUNG, CID_OEMID_ANY, add_quirk_mmc,
+		  MMC_QUIRK_SEC_ERASE_TRIM_BROKEN),
+	MMC_FIXUP("KYL00M", CID_MANFID_SAMSUNG, CID_OEMID_ANY, add_quirk_mmc,
+		  MMC_QUIRK_SEC_ERASE_TRIM_BROKEN),
+	MMC_FIXUP("VZL00M", CID_MANFID_SAMSUNG, CID_OEMID_ANY, add_quirk_mmc,
+		  MMC_QUIRK_SEC_ERASE_TRIM_BROKEN),
+
 	END_FIXUP
 };
 

drivers/mmc/host/atmel-mci.c

@@ -81,6 +81,7 @@ struct atmel_mci_caps {
 	bool	has_bad_data_ordering;
 	bool	need_reset_after_xfer;
 	bool	need_blksz_mul_4;
+	bool	need_notbusy_for_read_ops;
 };
 
 struct atmel_mci_dma {
@@ -1625,7 +1626,8 @@ static void atmci_tasklet_func(unsigned long priv)
 				__func__);
 			atmci_set_completed(host, EVENT_XFER_COMPLETE);
 
-			if (host->data->flags & MMC_DATA_WRITE) {
+			if (host->caps.need_notbusy_for_read_ops ||
+			   (host->data->flags & MMC_DATA_WRITE)) {
 				atmci_writel(host, ATMCI_IER, ATMCI_NOTBUSY);
 				state = STATE_WAITING_NOTBUSY;
 			} else if (host->mrq->stop) {
@@ -2218,6 +2220,7 @@ static void __init atmci_get_cap(struct atmel_mci *host)
 	host->caps.has_bad_data_ordering = 1;
 	host->caps.need_reset_after_xfer = 1;
 	host->caps.need_blksz_mul_4 = 1;
+	host->caps.need_notbusy_for_read_ops = 0;
 
 	/* keep only major version number */
 	switch (version & 0xf00) {
@@ -2238,6 +2241,7 @@ static void __init atmci_get_cap(struct atmel_mci *host)
 	case 0x200:
 		host->caps.has_rwproof = 1;
 		host->caps.need_blksz_mul_4 = 0;
+		host->caps.need_notbusy_for_read_ops = 1;
 	case 0x100:
 		host->caps.has_bad_data_ordering = 0;
 		host->caps.need_reset_after_xfer = 0;

drivers/mmc/host/bfin_sdh.c

@@ -49,13 +49,6 @@
 #define bfin_write_SDH_CFG		bfin_write_RSI_CFG
 #endif
 
-struct dma_desc_array {
-	unsigned long	start_addr;
-	unsigned short	cfg;
-	unsigned short	x_count;
-	short		x_modify;
-} __packed;
-
 struct sdh_host {
 	struct mmc_host		*mmc;
 	spinlock_t		lock;

drivers/mmc/host/dw_mmc.c

@@ -627,6 +627,7 @@ static void dw_mci_setup_bus(struct dw_mci_slot *slot)
 {
 	struct dw_mci *host = slot->host;
 	u32 div;
+	u32 clk_en_a;
 
 	if (slot->clock != host->current_speed) {
 		div = host->bus_hz / slot->clock;
@@ -659,9 +660,11 @@ static void dw_mci_setup_bus(struct dw_mci_slot *slot)
 		mci_send_cmd(slot,
 			     SDMMC_CMD_UPD_CLK | SDMMC_CMD_PRV_DAT_WAIT, 0);
 
-		/* enable clock */
-		mci_writel(host, CLKENA, ((SDMMC_CLKEN_ENABLE |
-			   SDMMC_CLKEN_LOW_PWR) << slot->id));
+		/* enable clock; only low power if no SDIO */
+		clk_en_a = SDMMC_CLKEN_ENABLE << slot->id;
+		if (!(mci_readl(host, INTMASK) & SDMMC_INT_SDIO(slot->id)))
+			clk_en_a |= SDMMC_CLKEN_LOW_PWR << slot->id;
+		mci_writel(host, CLKENA, clk_en_a);
 
 		/* inform CIU */
 		mci_send_cmd(slot,
@@ -862,6 +865,30 @@ static int dw_mci_get_cd(struct mmc_host *mmc)
 	return present;
 }
 
+/*
+ * Disable lower power mode.
+ *
+ * Low power mode will stop the card clock when idle.  According to the
+ * description of the CLKENA register we should disable low power mode
+ * for SDIO cards if we need SDIO interrupts to work.
+ *
+ * This function is fast if low power mode is already disabled.
+ */
+static void dw_mci_disable_low_power(struct dw_mci_slot *slot)
+{
+	struct dw_mci *host = slot->host;
+	u32 clk_en_a;
+	const u32 clken_low_pwr = SDMMC_CLKEN_LOW_PWR << slot->id;
+
+	clk_en_a = mci_readl(host, CLKENA);
+
+	if (clk_en_a & clken_low_pwr) {
+		mci_writel(host, CLKENA, clk_en_a & ~clken_low_pwr);
+		mci_send_cmd(slot, SDMMC_CMD_UPD_CLK |
+			     SDMMC_CMD_PRV_DAT_WAIT, 0);
+	}
+}
+
 static void dw_mci_enable_sdio_irq(struct mmc_host *mmc, int enb)
 {
 	struct dw_mci_slot *slot = mmc_priv(mmc);
@@ -871,6 +898,14 @@ static void dw_mci_enable_sdio_irq(struct mmc_host *mmc, int enb)
 	/* Enable/disable Slot Specific SDIO interrupt */
 	int_mask = mci_readl(host, INTMASK);
 	if (enb) {
+		/*
+		 * Turn off low power mode if it was enabled.  This is a bit of
+		 * a heavy operation and we disable / enable IRQs a lot, so
+		 * we'll leave low power mode disabled and it will get
+		 * re-enabled again in dw_mci_setup_bus().
+		 */
+		dw_mci_disable_low_power(slot);
+
 		mci_writel(host, INTMASK,
 			   (int_mask | SDMMC_INT_SDIO(slot->id)));
 	} else {
@@ -1429,22 +1464,10 @@ static void dw_mci_read_data_pio(struct dw_mci *host)
 			nbytes += len;
 			remain -= len;
 		} while (remain);
-		sg_miter->consumed = offset;
 
+		sg_miter->consumed = offset;
 		status = mci_readl(host, MINTSTS);
 		mci_writel(host, RINTSTS, SDMMC_INT_RXDR);
-		if (status & DW_MCI_DATA_ERROR_FLAGS) {
-			host->data_status = status;
-			data->bytes_xfered += nbytes;
-			sg_miter_stop(sg_miter);
-			host->sg = NULL;
-			smp_wmb();
-
-			set_bit(EVENT_DATA_ERROR, &host->pending_events);
-
-			tasklet_schedule(&host->tasklet);
-			return;
-		}
 	} while (status & SDMMC_INT_RXDR); /*if the RXDR is ready read again*/
 	data->bytes_xfered += nbytes;
 
@@ -1497,23 +1520,10 @@ static void dw_mci_write_data_pio(struct dw_mci *host)
 			nbytes += len;
 			remain -= len;
 		} while (remain);
-		sg_miter->consumed = offset;
 
+		sg_miter->consumed = offset;
 		status = mci_readl(host, MINTSTS);
 		mci_writel(host, RINTSTS, SDMMC_INT_TXDR);
-		if (status & DW_MCI_DATA_ERROR_FLAGS) {
-			host->data_status = status;
-			data->bytes_xfered += nbytes;
-			sg_miter_stop(sg_miter);
-			host->sg = NULL;
-
-			smp_wmb();
-
-			set_bit(EVENT_DATA_ERROR, &host->pending_events);
-
-			tasklet_schedule(&host->tasklet);
-			return;
-		}
 	} while (status & SDMMC_INT_TXDR); /* if TXDR write again */
 	data->bytes_xfered += nbytes;
 
@@ -1547,12 +1557,11 @@ static void dw_mci_cmd_interrupt(struct dw_mci *host, u32 status)
 static irqreturn_t dw_mci_interrupt(int irq, void *dev_id)
 {
 	struct dw_mci *host = dev_id;
-	u32 status, pending;
+	u32 pending;
 	unsigned int pass_count = 0;
 	int i;
 
 	do {
-		status = mci_readl(host, RINTSTS);
 		pending = mci_readl(host, MINTSTS); /* read-only mask reg */
 
 		/*
@@ -1570,7 +1579,7 @@ static irqreturn_t dw_mci_interrupt(int irq, void *dev_id)
 
 		if (pending & DW_MCI_CMD_ERROR_FLAGS) {
 			mci_writel(host, RINTSTS, DW_MCI_CMD_ERROR_FLAGS);
-			host->cmd_status = status;
+			host->cmd_status = pending;
 			smp_wmb();
 			set_bit(EVENT_CMD_COMPLETE, &host->pending_events);
 		}
@@ -1578,18 +1587,16 @@ static irqreturn_t dw_mci_interrupt(int irq, void *dev_id)
 		if (pending & DW_MCI_DATA_ERROR_FLAGS) {
 			/* if there is an error report DATA_ERROR */
 			mci_writel(host, RINTSTS, DW_MCI_DATA_ERROR_FLAGS);
-			host->data_status = status;
+			host->data_status = pending;
 			smp_wmb();
 			set_bit(EVENT_DATA_ERROR, &host->pending_events);
-			if (!(pending & (SDMMC_INT_DTO | SDMMC_INT_DCRC |
-					 SDMMC_INT_SBE | SDMMC_INT_EBE)))
-				tasklet_schedule(&host->tasklet);
+			tasklet_schedule(&host->tasklet);
 		}
 
 		if (pending & SDMMC_INT_DATA_OVER) {
 			mci_writel(host, RINTSTS, SDMMC_INT_DATA_OVER);
 			if (!host->data_status)
-				host->data_status = status;
+				host->data_status = pending;
 			smp_wmb();
 			if (host->dir_status == DW_MCI_RECV_STATUS) {
 				if (host->sg != NULL)
@@ -1613,7 +1620,7 @@ static irqreturn_t dw_mci_interrupt(int irq, void *dev_id)
 
 		if (pending & SDMMC_INT_CMD_DONE) {
 			mci_writel(host, RINTSTS, SDMMC_INT_CMD_DONE);
-			dw_mci_cmd_interrupt(host, status);
+			dw_mci_cmd_interrupt(host, pending);
 		}
 
 		if (pending & SDMMC_INT_CD) {

drivers/mmc/host/mxs-mmc.c

@@ -285,11 +285,11 @@ static irqreturn_t mxs_mmc_irq_handler(int irq, void *dev_id)
 	writel(stat & MXS_MMC_IRQ_BITS,
 	       host->base + HW_SSP_CTRL1(host) + STMP_OFFSET_REG_CLR);
 
+	spin_unlock(&host->lock);
+
 	if ((stat & BM_SSP_CTRL1_SDIO_IRQ) && (stat & BM_SSP_CTRL1_SDIO_IRQ_EN))
 		mmc_signal_sdio_irq(host->mmc);
 
-	spin_unlock(&host->lock);
-
 	if (stat & BM_SSP_CTRL1_RESP_TIMEOUT_IRQ)
 		cmd->error = -ETIMEDOUT;
 	else if (stat & BM_SSP_CTRL1_RESP_ERR_IRQ)
@@ -644,11 +644,6 @@ static void mxs_mmc_enable_sdio_irq(struct mmc_host *mmc, int enable)
 		       host->base + HW_SSP_CTRL0 + STMP_OFFSET_REG_SET);
 		writel(BM_SSP_CTRL1_SDIO_IRQ_EN,
 		       host->base + HW_SSP_CTRL1(host) + STMP_OFFSET_REG_SET);
-
-		if (readl(host->base + HW_SSP_STATUS(host)) &
-				BM_SSP_STATUS_SDIO_IRQ)
-			mmc_signal_sdio_irq(host->mmc);
-
 	} else {
 		writel(BM_SSP_CTRL0_SDIO_IRQ_CHECK,
 		       host->base + HW_SSP_CTRL0 + STMP_OFFSET_REG_CLR);
@@ -657,6 +652,11 @@ static void mxs_mmc_enable_sdio_irq(struct mmc_host *mmc, int enable)
 	}
 
 	spin_unlock_irqrestore(&host->lock, flags);
+
+	if (enable && readl(host->base + HW_SSP_STATUS(host)) &
+			BM_SSP_STATUS_SDIO_IRQ)
+		mmc_signal_sdio_irq(host->mmc);
+
 }
 
 static const struct mmc_host_ops mxs_mmc_ops = {

drivers/mmc/host/omap.c

@@ -668,7 +668,7 @@ mmc_omap_clk_timer(unsigned long data)
 static void
 mmc_omap_xfer_data(struct mmc_omap_host *host, int write)
 {
-	int n;
+	int n, nwords;
 
 	if (host->buffer_bytes_left == 0) {
 		host->sg_idx++;
@@ -678,15 +678,23 @@ mmc_omap_xfer_data(struct mmc_omap_host *host, int write)
 	n = 64;
 	if (n > host->buffer_bytes_left)
 		n = host->buffer_bytes_left;
+
+	nwords = n / 2;
+	nwords += n & 1; /* handle odd number of bytes to transfer */
+
 	host->buffer_bytes_left -= n;
 	host->total_bytes_left -= n;
 	host->data->bytes_xfered += n;
 
 	if (write) {
-		__raw_writesw(host->virt_base + OMAP_MMC_REG(host, DATA), host->buffer, n);
+		__raw_writesw(host->virt_base + OMAP_MMC_REG(host, DATA),
+			      host->buffer, nwords);
 	} else {
-		__raw_readsw(host->virt_base + OMAP_MMC_REG(host, DATA), host->buffer, n);
+		__raw_readsw(host->virt_base + OMAP_MMC_REG(host, DATA),
+			     host->buffer, nwords);
 	}
+
+	host->buffer += nwords;
 }
 
 static inline void mmc_omap_report_irq(u16 status)

drivers/mmc/host/sdhci-esdhc.h

@@ -48,14 +48,14 @@ static inline void esdhc_set_clock(struct sdhci_host *host, unsigned int clock)
 	int div = 1;
 	u32 temp;
 
+	if (clock == 0)
+		goto out;
+
 	temp = sdhci_readl(host, ESDHC_SYSTEM_CONTROL);
 	temp &= ~(ESDHC_CLOCK_IPGEN | ESDHC_CLOCK_HCKEN | ESDHC_CLOCK_PEREN
 		| ESDHC_CLOCK_MASK);
 	sdhci_writel(host, temp, ESDHC_SYSTEM_CONTROL);
 
-	if (clock == 0)
-		goto out;
-
 	while (host->max_clk / pre_div / 16 > clock && pre_div < 256)
 		pre_div *= 2;
 

drivers/mtd/ubi/vtbl.c

@@ -340,7 +340,7 @@ retry:
 	 * of this LEB as it will be deleted and freed in 'ubi_add_to_av()'.
 	 */
 	err = ubi_add_to_av(ubi, ai, new_aeb->pnum, new_aeb->ec, vid_hdr, 0);
-	kfree(new_aeb);
+	kmem_cache_free(ai->aeb_slab_cache, new_aeb);
 	ubi_free_vid_hdr(ubi, vid_hdr);
 	return err;
 
@@ -353,7 +353,7 @@ write_error:
 		list_add(&new_aeb->u.list, &ai->erase);
 		goto retry;
 	}
-	kfree(new_aeb);
+	kmem_cache_free(ai->aeb_slab_cache, new_aeb);
 out_free:
 	ubi_free_vid_hdr(ubi, vid_hdr);
 	return err;

drivers/net/can/sja1000/sja1000_platform.c

@@ -109,7 +109,9 @@ static int sp_probe(struct platform_device *pdev)
 	priv = netdev_priv(dev);
 
 	dev->irq = res_irq->start;
-	priv->irq_flags = res_irq->flags & (IRQF_TRIGGER_MASK | IRQF_SHARED);
+	priv->irq_flags = res_irq->flags & IRQF_TRIGGER_MASK;
+	if (res_irq->flags & IORESOURCE_IRQ_SHAREABLE)
+		priv->irq_flags |= IRQF_SHARED;
 	priv->reg_base = addr;
 	/* The CAN clock frequency is half the oscillator clock frequency */
 	priv->can.clock.freq = pdata->osc_freq / 2;

drivers/net/can/softing/softing_fw.c

@@ -150,7 +150,7 @@ int softing_load_fw(const char *file, struct softing *card,
 	const uint8_t *mem, *end, *dat;
 	uint16_t type, len;
 	uint32_t addr;
-	uint8_t *buf = NULL;
+	uint8_t *buf = NULL, *new_buf;
 	int buflen = 0;
 	int8_t type_end = 0;
 
@@ -199,11 +199,12 @@ int softing_load_fw(const char *file, struct softing *card,
 		if (len > buflen) {
 			/* align buflen */
 			buflen = (len + (1024-1)) & ~(1024-1);
-			buf = krealloc(buf, buflen, GFP_KERNEL);
-			if (!buf) {
+			new_buf = krealloc(buf, buflen, GFP_KERNEL);
+			if (!new_buf) {
 				ret = -ENOMEM;
 				goto failed;
 			}
+			buf = new_buf;
 		}
 		/* verify record data */
 		memcpy_fromio(buf, &dpram[addr + offset], len);

drivers/net/ethernet/broadcom/bnx2x/bnx2x.h

@@ -1708,9 +1708,6 @@ struct bnx2x_func_init_params {
 			continue;		\
 		else
 
-#define for_each_napi_rx_queue(bp, var) \
-	for ((var) = 0; (var) < bp->num_napi_queues; (var)++)
-
 /* Skip OOO FP */
 #define for_each_tx_queue(bp, var) \
 	for ((var) = 0; (var) < BNX2X_NUM_QUEUES(bp); (var)++) \

drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c

@@ -2046,6 +2046,8 @@ int bnx2x_nic_load(struct bnx2x *bp, int load_mode)
 	 */
 	bnx2x_setup_tc(bp->dev, bp->max_cos);
 
+	/* Add all NAPI objects */
+	bnx2x_add_all_napi(bp);
 	bnx2x_napi_enable(bp);
 
 	/* set pf load just before approaching the MCP */
@@ -2408,6 +2410,8 @@ int bnx2x_nic_unload(struct bnx2x *bp, int unload_mode)
 
 		/* Disable HW interrupts, NAPI */
 		bnx2x_netif_stop(bp, 1);
+		/* Delete all NAPI objects */
+		bnx2x_del_all_napi(bp);
 
 		/* Release IRQs */
 		bnx2x_free_irq(bp);

drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h

@@ -792,7 +792,7 @@ static inline void bnx2x_add_all_napi(struct bnx2x *bp)
 	bp->num_napi_queues = bp->num_queues;
 
 	/* Add NAPI objects */
-	for_each_napi_rx_queue(bp, i)
+	for_each_rx_queue(bp, i)
 		netif_napi_add(bp->dev, &bnx2x_fp(bp, i, napi),
 			       bnx2x_poll, BNX2X_NAPI_WEIGHT);
 }
@@ -801,7 +801,7 @@ static inline void bnx2x_del_all_napi(struct bnx2x *bp)
 {
 	int i;
 
-	for_each_napi_rx_queue(bp, i)
+	for_each_rx_queue(bp, i)
 		netif_napi_del(&bnx2x_fp(bp, i, napi));
 }
 

drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c

@@ -2888,11 +2888,9 @@ static void bnx2x_get_channels(struct net_device *dev,
  */
 static void bnx2x_change_num_queues(struct bnx2x *bp, int num_rss)
 {
-	bnx2x_del_all_napi(bp);
 	bnx2x_disable_msi(bp);
 	BNX2X_NUM_QUEUES(bp) = num_rss + NON_ETH_CONTEXT_USE;
 	bnx2x_set_int_mode(bp);
-	bnx2x_add_all_napi(bp);
 }
 
 /**

drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c

@@ -8427,6 +8427,8 @@ unload_error:
 
 	/* Disable HW interrupts, NAPI */
 	bnx2x_netif_stop(bp, 1);
+	/* Delete all NAPI objects */
+	bnx2x_del_all_napi(bp);
 
 	/* Release IRQs */
 	bnx2x_free_irq(bp);
@@ -11229,10 +11231,12 @@ static int bnx2x_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
 static void poll_bnx2x(struct net_device *dev)
 {
 	struct bnx2x *bp = netdev_priv(dev);
+	int i;
 
-	disable_irq(bp->pdev->irq);
-	bnx2x_interrupt(bp->pdev->irq, dev);
-	enable_irq(bp->pdev->irq);
+	for_each_eth_queue(bp, i) {
+		struct bnx2x_fastpath *fp = &bp->fp[i];
+		napi_schedule(&bnx2x_fp(bp, fp->index, napi));
+	}
 }
 #endif
 
@@ -11899,9 +11903,6 @@ static int __devinit bnx2x_init_one(struct pci_dev *pdev,
 	 */
 	bnx2x_set_int_mode(bp);
 
-	/* Add all NAPI objects */
-	bnx2x_add_all_napi(bp);
-
 	rc = register_netdev(dev);
 	if (rc) {
 		dev_err(&pdev->dev, "Cannot register net device\n");
@@ -11976,9 +11977,6 @@ static void __devexit bnx2x_remove_one(struct pci_dev *pdev)
 
 	unregister_netdev(dev);
 
-	/* Delete all NAPI objects */
-	bnx2x_del_all_napi(bp);
-
 	/* Power on: we can't let PCI layer write to us while we are in D3 */
 	bnx2x_set_power_state(bp, PCI_D0);
 
@@ -12025,6 +12023,8 @@ static int bnx2x_eeh_nic_unload(struct bnx2x *bp)
 	bnx2x_tx_disable(bp);
 
 	bnx2x_netif_stop(bp, 0);
+	/* Delete all NAPI objects */
+	bnx2x_del_all_napi(bp);
 
 	del_timer_sync(&bp->timer);
 

drivers/net/ethernet/cirrus/cs89x0.c

@@ -1243,6 +1243,7 @@ static void set_multicast_list(struct net_device *dev)
 {
 	struct net_local *lp = netdev_priv(dev);
 	unsigned long flags;
+	u16 cfg;
 
 	spin_lock_irqsave(&lp->lock, flags);
 	if (dev->flags & IFF_PROMISC)
@@ -1260,11 +1261,10 @@ static void set_multicast_list(struct net_device *dev)
 	/* in promiscuous mode, we accept errored packets,
 	 * so we have to enable interrupts on them also
 	 */
-	writereg(dev, PP_RxCFG,
-		 (lp->curr_rx_cfg |
-		  (lp->rx_mode == RX_ALL_ACCEPT)
-		  ? (RX_CRC_ERROR_ENBL | RX_RUNT_ENBL | RX_EXTRA_DATA_ENBL)
-		  : 0));
+	cfg = lp->curr_rx_cfg;
+	if (lp->rx_mode == RX_ALL_ACCEPT)
+		cfg |= RX_CRC_ERROR_ENBL | RX_RUNT_ENBL | RX_EXTRA_DATA_ENBL;
+	writereg(dev, PP_RxCFG, cfg);
 	spin_unlock_irqrestore(&lp->lock, flags);
 }
 

drivers/net/ethernet/emulex/benet/be_cmds.c

@@ -259,7 +259,7 @@ int be_process_mcc(struct be_adapter *adapter)
 	int num = 0, status = 0;
 	struct be_mcc_obj *mcc_obj = &adapter->mcc_obj;
 
-	spin_lock_bh(&adapter->mcc_cq_lock);
+	spin_lock(&adapter->mcc_cq_lock);
 	while ((compl = be_mcc_compl_get(adapter))) {
 		if (compl->flags & CQE_FLAGS_ASYNC_MASK) {
 			/* Interpret flags as an async trailer */
@@ -280,7 +280,7 @@ int be_process_mcc(struct be_adapter *adapter)
 	if (num)
 		be_cq_notify(adapter, mcc_obj->cq.id, mcc_obj->rearm_cq, num);
 
-	spin_unlock_bh(&adapter->mcc_cq_lock);
+	spin_unlock(&adapter->mcc_cq_lock);
 	return status;
 }
 
@@ -295,7 +295,9 @@ static int be_mcc_wait_compl(struct be_adapter *adapter)
 		if (be_error(adapter))
 			return -EIO;
 
+		local_bh_disable();
 		status = be_process_mcc(adapter);
+		local_bh_enable();
 
 		if (atomic_read(&mcc_obj->q.used) == 0)
 			break;

drivers/net/ethernet/emulex/benet/be_main.c

@@ -3763,7 +3763,9 @@ static void be_worker(struct work_struct *work)
 	/* when interrupts are not yet enabled, just reap any pending
 	* mcc completions */
 	if (!netif_running(adapter->netdev)) {
+		local_bh_disable();
 		be_process_mcc(adapter);
+		local_bh_enable();
 		goto reschedule;
 	}
 

drivers/net/ethernet/freescale/gianfar.c

@@ -1041,7 +1041,7 @@ static int gfar_probe(struct platform_device *ofdev)
 
 	if (priv->device_flags & FSL_GIANFAR_DEV_HAS_VLAN) {
 		dev->hw_features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX;
-		dev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX;
+		dev->features |= NETIF_F_HW_VLAN_RX;
 	}
 
 	if (priv->device_flags & FSL_GIANFAR_DEV_HAS_EXTENDED_HASH) {

drivers/net/ethernet/intel/e1000e/e1000.h

@@ -310,6 +310,7 @@ struct e1000_adapter {
 	 */
 	struct e1000_ring *tx_ring /* One per active queue */
 						____cacheline_aligned_in_smp;
+	u32 tx_fifo_limit;
 
 	struct napi_struct napi;
 

drivers/net/ethernet/intel/e1000e/netdev.c

@@ -3516,6 +3516,15 @@ void e1000e_reset(struct e1000_adapter *adapter)
 		break;
 	}
 
+	/*
+	 * Alignment of Tx data is on an arbitrary byte boundary with the
+	 * maximum size per Tx descriptor limited only to the transmit
+	 * allocation of the packet buffer minus 96 bytes with an upper
+	 * limit of 24KB due to receive synchronization limitations.
+	 */
+	adapter->tx_fifo_limit = min_t(u32, ((er32(PBA) >> 16) << 10) - 96,
+				       24 << 10);
+
 	/*
 	 * Disable Adaptive Interrupt Moderation if 2 full packets cannot
 	 * fit in receive buffer.
@@ -4785,12 +4794,9 @@ static bool e1000_tx_csum(struct e1000_ring *tx_ring, struct sk_buff *skb)
 	return 1;
 }
 
-#define E1000_MAX_PER_TXD	8192
-#define E1000_MAX_TXD_PWR	12
-
 static int e1000_tx_map(struct e1000_ring *tx_ring, struct sk_buff *skb,
 			unsigned int first, unsigned int max_per_txd,
-			unsigned int nr_frags, unsigned int mss)
+			unsigned int nr_frags)
 {
 	struct e1000_adapter *adapter = tx_ring->adapter;
 	struct pci_dev *pdev = adapter->pdev;
@@ -5023,20 +5029,19 @@ static int __e1000_maybe_stop_tx(struct e1000_ring *tx_ring, int size)
 
 static int e1000_maybe_stop_tx(struct e1000_ring *tx_ring, int size)
 {
+	BUG_ON(size > tx_ring->count);
+
 	if (e1000_desc_unused(tx_ring) >= size)
 		return 0;
 	return __e1000_maybe_stop_tx(tx_ring, size);
 }
 
-#define TXD_USE_COUNT(S, X) (((S) >> (X)) + 1)
 static netdev_tx_t e1000_xmit_frame(struct sk_buff *skb,
 				    struct net_device *netdev)
 {
 	struct e1000_adapter *adapter = netdev_priv(netdev);
 	struct e1000_ring *tx_ring = adapter->tx_ring;
 	unsigned int first;
-	unsigned int max_per_txd = E1000_MAX_PER_TXD;
-	unsigned int max_txd_pwr = E1000_MAX_TXD_PWR;
 	unsigned int tx_flags = 0;
 	unsigned int len = skb_headlen(skb);
 	unsigned int nr_frags;
@@ -5056,18 +5061,8 @@ static netdev_tx_t e1000_xmit_frame(struct sk_buff *skb,
 	}
 
 	mss = skb_shinfo(skb)->gso_size;
-	/*
-	 * The controller does a simple calculation to
-	 * make sure there is enough room in the FIFO before
-	 * initiating the DMA for each buffer.  The calc is:
-	 * 4 = ceil(buffer len/mss).  To make sure we don't
-	 * overrun the FIFO, adjust the max buffer len if mss
-	 * drops.
-	 */
 	if (mss) {
 		u8 hdr_len;
-		max_per_txd = min(mss << 2, max_per_txd);
-		max_txd_pwr = fls(max_per_txd) - 1;
 
 		/*
 		 * TSO Workaround for 82571/2/3 Controllers -- if skb->data
@@ -5097,12 +5092,12 @@ static netdev_tx_t e1000_xmit_frame(struct sk_buff *skb,
 		count++;
 	count++;
 
-	count += TXD_USE_COUNT(len, max_txd_pwr);
+	count += DIV_ROUND_UP(len, adapter->tx_fifo_limit);
 
 	nr_frags = skb_shinfo(skb)->nr_frags;
 	for (f = 0; f < nr_frags; f++)
-		count += TXD_USE_COUNT(skb_frag_size(&skb_shinfo(skb)->frags[f]),
-				       max_txd_pwr);
+		count += DIV_ROUND_UP(skb_frag_size(&skb_shinfo(skb)->frags[f]),
+				      adapter->tx_fifo_limit);
 
 	if (adapter->hw.mac.tx_pkt_filtering)
 		e1000_transfer_dhcp_info(adapter, skb);
@@ -5144,15 +5139,18 @@ static netdev_tx_t e1000_xmit_frame(struct sk_buff *skb,
 		tx_flags |= E1000_TX_FLAGS_NO_FCS;
 
 	/* if count is 0 then mapping error has occurred */
-	count = e1000_tx_map(tx_ring, skb, first, max_per_txd, nr_frags, mss);
+	count = e1000_tx_map(tx_ring, skb, first, adapter->tx_fifo_limit,
+			     nr_frags);
 	if (count) {
 		skb_tx_timestamp(skb);
 
 		netdev_sent_queue(netdev, skb->len);
 		e1000_tx_queue(tx_ring, tx_flags, count);
 		/* Make sure there is space in the ring for the next send. */
-		e1000_maybe_stop_tx(tx_ring, MAX_SKB_FRAGS + 2);
-
+		e1000_maybe_stop_tx(tx_ring,
+				    (MAX_SKB_FRAGS *
+				     DIV_ROUND_UP(PAGE_SIZE,
+						  adapter->tx_fifo_limit) + 2));
 	} else {
 		dev_kfree_skb_any(skb);
 		tx_ring->buffer_info[first].time_stamp = 0;
@@ -6327,8 +6325,8 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
 	adapter->hw.phy.autoneg_advertised = 0x2f;
 
 	/* ring size defaults */
-	adapter->rx_ring->count = 256;
-	adapter->tx_ring->count = 256;
+	adapter->rx_ring->count = E1000_DEFAULT_RXD;
+	adapter->tx_ring->count = E1000_DEFAULT_TXD;
 
 	/*
 	 * Initial Wake on LAN setting - If APM wake is enabled in

drivers/net/ethernet/sfc/ethtool.c

@@ -863,8 +863,8 @@ static int efx_ethtool_get_class_rule(struct efx_nic *efx,
 				       &ip_entry->ip4dst, &ip_entry->pdst);
 	if (rc != 0) {
 		rc = efx_filter_get_ipv4_full(
-			&spec, &proto, &ip_entry->ip4src, &ip_entry->psrc,
-			&ip_entry->ip4dst, &ip_entry->pdst);
+			&spec, &proto, &ip_entry->ip4dst, &ip_entry->pdst,
+			&ip_entry->ip4src, &ip_entry->psrc);
 		EFX_WARN_ON_PARANOID(rc);
 		ip_mask->ip4src = ~0;
 		ip_mask->psrc = ~0;

drivers/net/ethernet/stmicro/stmmac/common.h

@@ -22,6 +22,9 @@
   Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
 *******************************************************************************/
 
+#ifndef __COMMON_H__
+#define __COMMON_H__
+
 #include <linux/etherdevice.h>
 #include <linux/netdevice.h>
 #include <linux/phy.h>
@@ -366,3 +369,5 @@ extern void stmmac_set_mac(void __iomem *ioaddr, bool enable);
 
 extern void dwmac_dma_flush_tx_fifo(void __iomem *ioaddr);
 extern const struct stmmac_ring_mode_ops ring_mode_ops;
+
+#endif /* __COMMON_H__ */

drivers/net/ethernet/stmicro/stmmac/descs.h

@@ -20,6 +20,10 @@
 
   Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
 *******************************************************************************/
+
+#ifndef __DESCS_H__
+#define __DESCS_H__
+
 struct dma_desc {
 	/* Receive descriptor */
 	union {
@@ -166,3 +170,5 @@ enum tdes_csum_insertion {
 					 * is not calculated */
 	cic_full = 3,		/* IP header and pseudoheader */
 };
+
+#endif /* __DESCS_H__ */

drivers/net/ethernet/stmicro/stmmac/descs_com.h

@@ -27,6 +27,9 @@
   Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
 *******************************************************************************/
 
+#ifndef __DESC_COM_H__
+#define __DESC_COM_H__
+
 #if defined(CONFIG_STMMAC_RING)
 static inline void ehn_desc_rx_set_on_ring_chain(struct dma_desc *p, int end)
 {
@@ -124,3 +127,5 @@ static inline void norm_set_tx_desc_len(struct dma_desc *p, int len)
 	p->des01.tx.buffer1_size = len;
 }
 #endif
+
+#endif /* __DESC_COM_H__ */

drivers/net/ethernet/stmicro/stmmac/dwmac100.h

@@ -22,6 +22,9 @@
   Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
 *******************************************************************************/
 
+#ifndef __DWMAC100_H__
+#define __DWMAC100_H__
+
 #include <linux/phy.h>
 #include "common.h"
 
@@ -119,3 +122,5 @@ enum ttc_control {
 #define DMA_MISSED_FRAME_M_CNTR	0x0000ffff	/* Missed Frame Couinter */
 
 extern const struct stmmac_dma_ops dwmac100_dma_ops;
+
+#endif /* __DWMAC100_H__ */

drivers/net/ethernet/stmicro/stmmac/dwmac1000.h

@@ -19,6 +19,8 @@
 
   Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
 *******************************************************************************/
+#ifndef __DWMAC1000_H__
+#define __DWMAC1000_H__
 
 #include <linux/phy.h>
 #include "common.h"
@@ -229,6 +231,7 @@ enum rtc_control {
 #define GMAC_MMC_RX_CSUM_OFFLOAD   0x208
 
 /* Synopsys Core versions */
-#define	DWMAC_CORE_3_40	34
+#define	DWMAC_CORE_3_40	0x34
 
 extern const struct stmmac_dma_ops dwmac1000_dma_ops;
+#endif /* __DWMAC1000_H__ */

drivers/net/ethernet/stmicro/stmmac/dwmac_dma.h

@@ -22,6 +22,9 @@
   Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
 *******************************************************************************/
 
+#ifndef __DWMAC_DMA_H__
+#define __DWMAC_DMA_H__
+
 /* DMA CRS Control and Status Register Mapping */
 #define DMA_BUS_MODE		0x00001000	/* Bus Mode */
 #define DMA_XMT_POLL_DEMAND	0x00001004	/* Transmit Poll Demand */
@@ -109,3 +112,5 @@ extern void dwmac_dma_start_rx(void __iomem *ioaddr);
 extern void dwmac_dma_stop_rx(void __iomem *ioaddr);
 extern int dwmac_dma_interrupt(void __iomem *ioaddr,
 				struct stmmac_extra_stats *x);
+
+#endif /* __DWMAC_DMA_H__ */

drivers/net/ethernet/stmicro/stmmac/mmc.h

@@ -22,6 +22,9 @@
   Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
 *******************************************************************************/
 
+#ifndef __MMC_H__
+#define __MMC_H__
+
 /* MMC control register */
 /* When set, all counter are reset */
 #define MMC_CNTRL_COUNTER_RESET		0x1
@@ -129,3 +132,5 @@ struct stmmac_counters {
 extern void dwmac_mmc_ctrl(void __iomem *ioaddr, unsigned int mode);
 extern void dwmac_mmc_intr_all_mask(void __iomem *ioaddr);
 extern void dwmac_mmc_read(void __iomem *ioaddr, struct stmmac_counters *mmc);
+
+#endif /* __MMC_H__ */

drivers/net/ethernet/stmicro/stmmac/mmc_core.c

@@ -33,7 +33,7 @@
 #define MMC_TX_INTR		0x00000108	/* MMC TX Interrupt */
 #define MMC_RX_INTR_MASK	0x0000010c	/* MMC Interrupt Mask */
 #define MMC_TX_INTR_MASK	0x00000110	/* MMC Interrupt Mask */
-#define MMC_DEFAUL_MASK		0xffffffff
+#define MMC_DEFAULT_MASK		0xffffffff
 
 /* MMC TX counter registers */
 
@@ -147,8 +147,8 @@ void dwmac_mmc_ctrl(void __iomem *ioaddr, unsigned int mode)
 /* To mask all all interrupts.*/
 void dwmac_mmc_intr_all_mask(void __iomem *ioaddr)
 {
-	writel(MMC_DEFAUL_MASK, ioaddr + MMC_RX_INTR_MASK);
-	writel(MMC_DEFAUL_MASK, ioaddr + MMC_TX_INTR_MASK);
+	writel(MMC_DEFAULT_MASK, ioaddr + MMC_RX_INTR_MASK);
+	writel(MMC_DEFAULT_MASK, ioaddr + MMC_TX_INTR_MASK);
 }
 
 /* This reads the MAC core counters (if actaully supported).

drivers/net/ethernet/stmicro/stmmac/stmmac.h

@@ -20,6 +20,9 @@
   Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
 *******************************************************************************/
 
+#ifndef __STMMAC_H__
+#define __STMMAC_H__
+
 #define STMMAC_RESOURCE_NAME   "stmmaceth"
 #define DRV_MODULE_VERSION	"March_2012"
 
@@ -166,3 +169,5 @@ static inline void stmmac_unregister_pci(void)
 {
 }
 #endif /* CONFIG_STMMAC_PCI */
+
+#endif /* __STMMAC_H__ */

drivers/net/ethernet/stmicro/stmmac/stmmac_timer.h

@@ -21,6 +21,8 @@
 
   Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
 *******************************************************************************/
+#ifndef __STMMAC_TIMER_H__
+#define __STMMAC_TIMER_H__
 
 struct stmmac_timer {
 	void (*timer_start) (unsigned int new_freq);
@@ -40,3 +42,5 @@ void stmmac_schedule(struct net_device *dev);
 extern int tmu2_register_user(void *fnt, void *data);
 extern void tmu2_unregister_user(void);
 #endif
+
+#endif /* __STMMAC_TIMER_H__ */

drivers/net/ethernet/ti/davinci_mdio.c

@@ -394,8 +394,10 @@ static int __devexit davinci_mdio_remove(struct platform_device *pdev)
 	struct device *dev = &pdev->dev;
 	struct davinci_mdio_data *data = dev_get_drvdata(dev);
 
-	if (data->bus)
+	if (data->bus) {
+		mdiobus_unregister(data->bus);
 		mdiobus_free(data->bus);
+	}
 
 	if (data->clk)
 		clk_put(data->clk);

drivers/net/fddi/skfp/pmf.c

@@ -673,7 +673,7 @@ void smt_add_para(struct s_smc *smc, struct s_pcon *pcon, u_short para,
 			sm_pm_get_ls(smc,port_to_mib(smc,port))) ;
 		break ;
 	case SMT_P_REASON :
-		* (u_long *) to = 0 ;
+		*(u32 *)to = 0 ;
 		sp_len = 4 ;
 		goto sp_done ;
 	case SMT_P1033 :			/* time stamp */

drivers/net/usb/qmi_wwan.c

@@ -413,7 +413,9 @@ static const struct usb_device_id products[] = {
 
 	/* 5. Gobi 2000 and 3000 devices */
 	{QMI_GOBI_DEVICE(0x413c, 0x8186)},	/* Dell Gobi 2000 Modem device (N0218, VU936) */
+	{QMI_GOBI_DEVICE(0x413c, 0x8194)},	/* Dell Gobi 3000 Composite */
 	{QMI_GOBI_DEVICE(0x05c6, 0x920b)},	/* Generic Gobi 2000 Modem device */
+	{QMI_GOBI_DEVICE(0x05c6, 0x920d)},	/* Gobi 3000 Composite */
 	{QMI_GOBI_DEVICE(0x05c6, 0x9225)},	/* Sony Gobi 2000 Modem device (N0279, VU730) */
 	{QMI_GOBI_DEVICE(0x05c6, 0x9245)},	/* Samsung Gobi 2000 Modem device (VL176) */
 	{QMI_GOBI_DEVICE(0x03f0, 0x251d)},	/* HP Gobi 2000 Modem device (VP412) */
@@ -441,6 +443,8 @@ static const struct usb_device_id products[] = {
 	{QMI_GOBI_DEVICE(0x1199, 0x9015)},	/* Sierra Wireless Gobi 3000 Modem device */
 	{QMI_GOBI_DEVICE(0x1199, 0x9019)},	/* Sierra Wireless Gobi 3000 Modem device */
 	{QMI_GOBI_DEVICE(0x1199, 0x901b)},	/* Sierra Wireless MC7770 */
+	{QMI_GOBI_DEVICE(0x12d1, 0x14f1)},	/* Sony Gobi 3000 Composite */
+	{QMI_GOBI_DEVICE(0x1410, 0xa021)},	/* Foxconn Gobi 3000 Modem device (Novatel E396) */
 
 	{ }					/* END */
 };

drivers/net/usb/usbnet.c

@@ -1573,7 +1573,7 @@ int usbnet_resume (struct usb_interface *intf)
 				netif_device_present(dev->net) &&
 				!timer_pending(&dev->delay) &&
 				!test_bit(EVENT_RX_HALT, &dev->flags))
-					rx_alloc_submit(dev, GFP_KERNEL);
+					rx_alloc_submit(dev, GFP_NOIO);
 
 			if (!(dev->txq.qlen >= TX_QLEN(dev)))
 				netif_tx_wake_all_queues(dev->net);

drivers/net/wireless/ath/ath5k/eeprom.c

@@ -1482,7 +1482,7 @@ ath5k_eeprom_read_target_rate_pwr_info(struct ath5k_hw *ah, unsigned int mode)
 	case AR5K_EEPROM_MODE_11A:
 		offset += AR5K_EEPROM_TARGET_PWR_OFF_11A(ee->ee_version);
 		rate_pcal_info = ee->ee_rate_tpwr_a;
-		ee->ee_rate_target_pwr_num[mode] = AR5K_EEPROM_N_5GHZ_CHAN;
+		ee->ee_rate_target_pwr_num[mode] = AR5K_EEPROM_N_5GHZ_RATE_CHAN;
 		break;
 	case AR5K_EEPROM_MODE_11B:
 		offset += AR5K_EEPROM_TARGET_PWR_OFF_11B(ee->ee_version);

drivers/net/wireless/ath/ath5k/eeprom.h

@@ -182,6 +182,7 @@
 #define AR5K_EEPROM_EEP_DELTA		10
 #define AR5K_EEPROM_N_MODES		3
 #define AR5K_EEPROM_N_5GHZ_CHAN		10
+#define AR5K_EEPROM_N_5GHZ_RATE_CHAN	8
 #define AR5K_EEPROM_N_2GHZ_CHAN		3
 #define AR5K_EEPROM_N_2GHZ_CHAN_2413	4
 #define	AR5K_EEPROM_N_2GHZ_CHAN_MAX	4

drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c

@@ -1233,6 +1233,9 @@ uint brcms_reset(struct brcms_info *wl)
 	/* dpc will not be rescheduled */
 	wl->resched = false;
 
+	/* inform publicly that interface is down */
+	wl->pub->up = false;
+
 	return 0;
 }
 

drivers/net/wireless/ipw2x00/ipw2100.c

@@ -2042,7 +2042,8 @@ static void isr_indicate_associated(struct ipw2100_priv *priv, u32 status)
 		return;
 	}
 	len = ETH_ALEN;
-	ipw2100_get_ordinal(priv, IPW_ORD_STAT_ASSN_AP_BSSID, &bssid, &len);
+	ret = ipw2100_get_ordinal(priv, IPW_ORD_STAT_ASSN_AP_BSSID, bssid,
+				  &len);
 	if (ret) {
 		IPW_DEBUG_INFO("failed querying ordinals at line %d\n",
 			       __LINE__);

drivers/net/wireless/iwlwifi/dvm/debugfs.c

@@ -124,6 +124,9 @@ static ssize_t iwl_dbgfs_sram_read(struct file *file,
 	const struct fw_img *img;
 	size_t bufsz;
 
+	if (!iwl_is_ready_rf(priv))
+		return -EAGAIN;
+
 	/* default is to dump the entire data segment */
 	if (!priv->dbgfs_sram_offset && !priv->dbgfs_sram_len) {
 		priv->dbgfs_sram_offset = 0x800000;

drivers/net/wireless/iwlwifi/pcie/internal.h

@@ -350,7 +350,7 @@ int iwl_queue_space(const struct iwl_queue *q);
 /*****************************************************
 * Error handling
 ******************************************************/
-int iwl_dump_fh(struct iwl_trans *trans, char **buf, bool display);
+int iwl_dump_fh(struct iwl_trans *trans, char **buf);
 void iwl_dump_csr(struct iwl_trans *trans);
 
 /*****************************************************

drivers/net/wireless/iwlwifi/pcie/rx.c

@@ -555,7 +555,7 @@ static void iwl_irq_handle_error(struct iwl_trans *trans)
 	}
 
 	iwl_dump_csr(trans);
-	iwl_dump_fh(trans, NULL, false);
+	iwl_dump_fh(trans, NULL);
 
 	iwl_op_mode_nic_error(trans->op_mode);
 }

drivers/net/wireless/iwlwifi/pcie/trans.c

@@ -1649,13 +1649,9 @@ static const char *get_fh_string(int cmd)
 #undef IWL_CMD
 }
 
-int iwl_dump_fh(struct iwl_trans *trans, char **buf, bool display)
+int iwl_dump_fh(struct iwl_trans *trans, char **buf)
 {
 	int i;
-#ifdef CONFIG_IWLWIFI_DEBUG
-	int pos = 0;
-	size_t bufsz = 0;
-#endif
 	static const u32 fh_tbl[] = {
 		FH_RSCSR_CHNL0_STTS_WPTR_REG,
 		FH_RSCSR_CHNL0_RBDCB_BASE_REG,
@@ -1667,29 +1663,35 @@ int iwl_dump_fh(struct iwl_trans *trans, char **buf, bool display)
 		FH_TSSR_TX_STATUS_REG,
 		FH_TSSR_TX_ERROR_REG
 	};
-#ifdef CONFIG_IWLWIFI_DEBUG
-	if (display) {
-		bufsz = ARRAY_SIZE(fh_tbl) * 48 + 40;
+
+#ifdef CONFIG_IWLWIFI_DEBUGFS
+	if (buf) {
+		int pos = 0;
+		size_t bufsz = ARRAY_SIZE(fh_tbl) * 48 + 40;
+
 		*buf = kmalloc(bufsz, GFP_KERNEL);
 		if (!*buf)
 			return -ENOMEM;
+
 		pos += scnprintf(*buf + pos, bufsz - pos,
 				"FH register values:\n");
-		for (i = 0; i < ARRAY_SIZE(fh_tbl); i++) {
+
+		for (i = 0; i < ARRAY_SIZE(fh_tbl); i++)
 			pos += scnprintf(*buf + pos, bufsz - pos,
 				"  %34s: 0X%08x\n",
 				get_fh_string(fh_tbl[i]),
 				iwl_read_direct32(trans, fh_tbl[i]));
-		}
+
 		return pos;
 	}
 #endif
+
 	IWL_ERR(trans, "FH register values:\n");
-	for (i = 0; i <  ARRAY_SIZE(fh_tbl); i++) {
+	for (i = 0; i <  ARRAY_SIZE(fh_tbl); i++)
 		IWL_ERR(trans, "  %34s: 0X%08x\n",
 			get_fh_string(fh_tbl[i]),
 			iwl_read_direct32(trans, fh_tbl[i]));
-	}
+
 	return 0;
 }
 
@@ -1982,11 +1984,11 @@ static ssize_t iwl_dbgfs_fh_reg_read(struct file *file,
 				     size_t count, loff_t *ppos)
 {
 	struct iwl_trans *trans = file->private_data;
-	char *buf;
+	char *buf = NULL;
 	int pos = 0;
 	ssize_t ret = -EFAULT;
 
-	ret = pos = iwl_dump_fh(trans, &buf, true);
+	ret = pos = iwl_dump_fh(trans, &buf);
 	if (buf) {
 		ret = simple_read_from_buffer(user_buf,
 					      count, ppos, buf, pos);

drivers/net/xen-netfront.c

@@ -57,8 +57,7 @@
 static const struct ethtool_ops xennet_ethtool_ops;
 
 struct netfront_cb {
-	struct page *page;
-	unsigned offset;
+	int pull_to;
 };
 
 #define NETFRONT_SKB_CB(skb)	((struct netfront_cb *)((skb)->cb))
@@ -867,15 +866,9 @@ static int handle_incoming_queue(struct net_device *dev,
 	struct sk_buff *skb;
 
 	while ((skb = __skb_dequeue(rxq)) != NULL) {
-		struct page *page = NETFRONT_SKB_CB(skb)->page;
-		void *vaddr = page_address(page);
-		unsigned offset = NETFRONT_SKB_CB(skb)->offset;
-
-		memcpy(skb->data, vaddr + offset,
-		       skb_headlen(skb));
+		int pull_to = NETFRONT_SKB_CB(skb)->pull_to;
 
-		if (page != skb_frag_page(&skb_shinfo(skb)->frags[0]))
-			__free_page(page);
+		__pskb_pull_tail(skb, pull_to - skb_headlen(skb));
 
 		/* Ethernet work: Delayed to here as it peeks the header. */
 		skb->protocol = eth_type_trans(skb, dev);
@@ -913,7 +906,6 @@ static int xennet_poll(struct napi_struct *napi, int budget)
 	struct sk_buff_head errq;
 	struct sk_buff_head tmpq;
 	unsigned long flags;
-	unsigned int len;
 	int err;
 
 	spin_lock(&np->rx_lock);
@@ -955,24 +947,13 @@ err:
 			}
 		}
 
-		NETFRONT_SKB_CB(skb)->page =
-			skb_frag_page(&skb_shinfo(skb)->frags[0]);
-		NETFRONT_SKB_CB(skb)->offset = rx->offset;
-
-		len = rx->status;
-		if (len > RX_COPY_THRESHOLD)
-			len = RX_COPY_THRESHOLD;
-		skb_put(skb, len);
+		NETFRONT_SKB_CB(skb)->pull_to = rx->status;
+		if (NETFRONT_SKB_CB(skb)->pull_to > RX_COPY_THRESHOLD)
+			NETFRONT_SKB_CB(skb)->pull_to = RX_COPY_THRESHOLD;
 
-		if (rx->status > len) {
-			skb_shinfo(skb)->frags[0].page_offset =
-				rx->offset + len;
-			skb_frag_size_set(&skb_shinfo(skb)->frags[0], rx->status - len);
-			skb->data_len = rx->status - len;
-		} else {
-			__skb_fill_page_desc(skb, 0, NULL, 0, 0);
-			skb_shinfo(skb)->nr_frags = 0;
-		}
+		skb_shinfo(skb)->frags[0].page_offset = rx->offset;
+		skb_frag_size_set(&skb_shinfo(skb)->frags[0], rx->status);
+		skb->data_len = rx->status;
 
 		i = xennet_fill_frags(np, skb, &tmpq);
 
@@ -999,7 +980,7 @@ err:
 		 * receive throughout using the standard receive
 		 * buffer size was cut by 25%(!!!).
 		 */
-		skb->truesize += skb->data_len - (RX_COPY_THRESHOLD - len);
+		skb->truesize += skb->data_len - RX_COPY_THRESHOLD;
 		skb->len += skb->data_len;
 
 		if (rx->flags & XEN_NETRXF_csum_blank)

drivers/pci/pci-driver.c

@@ -280,8 +280,12 @@ static long local_pci_probe(void *_ddi)
 {
 	struct drv_dev_and_id *ddi = _ddi;
 	struct device *dev = &ddi->dev->dev;
+	struct device *parent = dev->parent;
 	int rc;
 
+	/* The parent bridge must be in active state when probing */
+	if (parent)
+		pm_runtime_get_sync(parent);
 	/* Unbound PCI devices are always set to disabled and suspended.
 	 * During probe, the device is set to enabled and active and the
 	 * usage count is incremented.  If the driver supports runtime PM,
@@ -298,6 +302,8 @@ static long local_pci_probe(void *_ddi)
 		pm_runtime_set_suspended(dev);
 		pm_runtime_put_noidle(dev);
 	}
+	if (parent)
+		pm_runtime_put(parent);
 	return rc;
 }