arm64: dts: split Foundation model dts to put the GIC separately

The ARMv8 Foundation model can be run with a GICv2 or a GICv3.
To prepare for the GICv3 version of the .dts without code duplication,
move most of the nodes of the existing DT (except the GIC) into an
include file and just keep that include statement and the GIC node in
the current foundation-v8.dts.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>

arch/arm64/boot/dts/arm/foundation-v8.dts

@@ -1,77 +1,12 @@
 /*
  * ARM Ltd.
  *
- * ARMv8 Foundation model DTS
+ * ARMv8 Foundation model DTS (GICv2 configuration)
  */
 
-/dts-v1/;
-
-/memreserve/ 0x80000000 0x00010000;
+#include "foundation-v8.dtsi"
 
 / {
-	model = "Foundation-v8A";
-	compatible = "arm,foundation-aarch64", "arm,vexpress";
-	interrupt-parent = <&gic>;
-	#address-cells = <2>;
-	#size-cells = <2>;
-
-	chosen { };
-
-	aliases {
-		serial0 = &v2m_serial0;
-		serial1 = &v2m_serial1;
-		serial2 = &v2m_serial2;
-		serial3 = &v2m_serial3;
-	};
-
-	cpus {
-		#address-cells = <2>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,armv8";
-			reg = <0x0 0x0>;
-			enable-method = "spin-table";
-			cpu-release-addr = <0x0 0x8000fff8>;
-			next-level-cache = <&L2_0>;
-		};
-		cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,armv8";
-			reg = <0x0 0x1>;
-			enable-method = "spin-table";
-			cpu-release-addr = <0x0 0x8000fff8>;
-			next-level-cache = <&L2_0>;
-		};
-		cpu@2 {
-			device_type = "cpu";
-			compatible = "arm,armv8";
-			reg = <0x0 0x2>;
-			enable-method = "spin-table";
-			cpu-release-addr = <0x0 0x8000fff8>;
-			next-level-cache = <&L2_0>;
-		};
-		cpu@3 {
-			device_type = "cpu";
-			compatible = "arm,armv8";
-			reg = <0x0 0x3>;
-			enable-method = "spin-table";
-			cpu-release-addr = <0x0 0x8000fff8>;
-			next-level-cache = <&L2_0>;
-		};
-
-		L2_0: l2-cache0 {
-			compatible = "cache";
-		};
-	};
-
-	memory@80000000 {
-		device_type = "memory";
-		reg = <0x00000000 0x80000000 0 0x80000000>,
-		      <0x00000008 0x80000000 0 0x80000000>;
-	};
-
 	gic: interrupt-controller@2c001000 {
 		compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic";
 		#interrupt-cells = <3>;
@@ -83,158 +18,4 @@
 		      <0x0 0x2c006000 0 0x2000>;
 		interrupts = <1 9 0xf04>;
 	};
-
-	timer {
-		compatible = "arm,armv8-timer";
-		interrupts = <1 13 0xf08>,
-			     <1 14 0xf08>,
-			     <1 11 0xf08>,
-			     <1 10 0xf08>;
-		clock-frequency = <100000000>;
-	};
-
-	pmu {
-		compatible = "arm,armv8-pmuv3";
-		interrupts = <0 60 4>,
-			     <0 61 4>,
-			     <0 62 4>,
-			     <0 63 4>;
-	};
-
-	smb {
-		compatible = "arm,vexpress,v2m-p1", "simple-bus";
-		arm,v2m-memory-map = "rs1";
-		#address-cells = <2>; /* SMB chipselect number and offset */
-		#size-cells = <1>;
-
-		ranges = <0 0 0 0x08000000 0x04000000>,
-			 <1 0 0 0x14000000 0x04000000>,
-			 <2 0 0 0x18000000 0x04000000>,
-			 <3 0 0 0x1c000000 0x04000000>,
-			 <4 0 0 0x0c000000 0x04000000>,
-			 <5 0 0 0x10000000 0x04000000>;
-
-		#interrupt-cells = <1>;
-		interrupt-map-mask = <0 0 63>;
-		interrupt-map = <0 0  0 &gic 0 0 0  0 4>,
-				<0 0  1 &gic 0 0 0  1 4>,
-				<0 0  2 &gic 0 0 0  2 4>,
-				<0 0  3 &gic 0 0 0  3 4>,
-				<0 0  4 &gic 0 0 0  4 4>,
-				<0 0  5 &gic 0 0 0  5 4>,
-				<0 0  6 &gic 0 0 0  6 4>,
-				<0 0  7 &gic 0 0 0  7 4>,
-				<0 0  8 &gic 0 0 0  8 4>,
-				<0 0  9 &gic 0 0 0  9 4>,
-				<0 0 10 &gic 0 0 0 10 4>,
-				<0 0 11 &gic 0 0 0 11 4>,
-				<0 0 12 &gic 0 0 0 12 4>,
-				<0 0 13 &gic 0 0 0 13 4>,
-				<0 0 14 &gic 0 0 0 14 4>,
-				<0 0 15 &gic 0 0 0 15 4>,
-				<0 0 16 &gic 0 0 0 16 4>,
-				<0 0 17 &gic 0 0 0 17 4>,
-				<0 0 18 &gic 0 0 0 18 4>,
-				<0 0 19 &gic 0 0 0 19 4>,
-				<0 0 20 &gic 0 0 0 20 4>,
-				<0 0 21 &gic 0 0 0 21 4>,
-				<0 0 22 &gic 0 0 0 22 4>,
-				<0 0 23 &gic 0 0 0 23 4>,
-				<0 0 24 &gic 0 0 0 24 4>,
-				<0 0 25 &gic 0 0 0 25 4>,
-				<0 0 26 &gic 0 0 0 26 4>,
-				<0 0 27 &gic 0 0 0 27 4>,
-				<0 0 28 &gic 0 0 0 28 4>,
-				<0 0 29 &gic 0 0 0 29 4>,
-				<0 0 30 &gic 0 0 0 30 4>,
-				<0 0 31 &gic 0 0 0 31 4>,
-				<0 0 32 &gic 0 0 0 32 4>,
-				<0 0 33 &gic 0 0 0 33 4>,
-				<0 0 34 &gic 0 0 0 34 4>,
-				<0 0 35 &gic 0 0 0 35 4>,
-				<0 0 36 &gic 0 0 0 36 4>,
-				<0 0 37 &gic 0 0 0 37 4>,
-				<0 0 38 &gic 0 0 0 38 4>,
-				<0 0 39 &gic 0 0 0 39 4>,
-				<0 0 40 &gic 0 0 0 40 4>,
-				<0 0 41 &gic 0 0 0 41 4>,
-				<0 0 42 &gic 0 0 0 42 4>;
-
-		ethernet@2,02000000 {
-			compatible = "smsc,lan91c111";
-			reg = <2 0x02000000 0x10000>;
-			interrupts = <15>;
-		};
-
-		v2m_clk24mhz: clk24mhz {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <24000000>;
-			clock-output-names = "v2m:clk24mhz";
-		};
-
-		v2m_refclk1mhz: refclk1mhz {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <1000000>;
-			clock-output-names = "v2m:refclk1mhz";
-		};
-
-		v2m_refclk32khz: refclk32khz {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <32768>;
-			clock-output-names = "v2m:refclk32khz";
-		};
-
-		iofpga@3,00000000 {
-			compatible = "arm,amba-bus", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 3 0 0x200000>;
-
-			v2m_sysreg: sysreg@010000 {
-				compatible = "arm,vexpress-sysreg";
-				reg = <0x010000 0x1000>;
-			};
-
-			v2m_serial0: uart@090000 {
-				compatible = "arm,pl011", "arm,primecell";
-				reg = <0x090000 0x1000>;
-				interrupts = <5>;
-				clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
-				clock-names = "uartclk", "apb_pclk";
-			};
-
-			v2m_serial1: uart@0a0000 {
-				compatible = "arm,pl011", "arm,primecell";
-				reg = <0x0a0000 0x1000>;
-				interrupts = <6>;
-				clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
-				clock-names = "uartclk", "apb_pclk";
-			};
-
-			v2m_serial2: uart@0b0000 {
-				compatible = "arm,pl011", "arm,primecell";
-				reg = <0x0b0000 0x1000>;
-				interrupts = <7>;
-				clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
-				clock-names = "uartclk", "apb_pclk";
-			};
-
-			v2m_serial3: uart@0c0000 {
-				compatible = "arm,pl011", "arm,primecell";
-				reg = <0x0c0000 0x1000>;
-				interrupts = <8>;
-				clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
-				clock-names = "uartclk", "apb_pclk";
-			};
-
-			virtio_block@0130000 {
-				compatible = "virtio,mmio";
-				reg = <0x130000 0x200>;
-				interrupts = <42>;
-			};
-		};
-	};
 };

arch/arm64/boot/dts/arm/foundation-v8.dtsi

@@ -0,0 +1,228 @@
+/*
+ * ARM Ltd.
+ *
+ * ARMv8 Foundation model DTS
+ */
+
+/dts-v1/;
+
+/memreserve/ 0x80000000 0x00010000;
+
+/ {
+	model = "Foundation-v8A";
+	compatible = "arm,foundation-aarch64", "arm,vexpress";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	chosen { };
+
+	aliases {
+		serial0 = &v2m_serial0;
+		serial1 = &v2m_serial1;
+		serial2 = &v2m_serial2;
+		serial3 = &v2m_serial3;
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,armv8";
+			reg = <0x0 0x0>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x0 0x8000fff8>;
+			next-level-cache = <&L2_0>;
+		};
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,armv8";
+			reg = <0x0 0x1>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x0 0x8000fff8>;
+			next-level-cache = <&L2_0>;
+		};
+		cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,armv8";
+			reg = <0x0 0x2>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x0 0x8000fff8>;
+			next-level-cache = <&L2_0>;
+		};
+		cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,armv8";
+			reg = <0x0 0x3>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x0 0x8000fff8>;
+			next-level-cache = <&L2_0>;
+		};
+
+		L2_0: l2-cache0 {
+			compatible = "cache";
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x00000000 0x80000000 0 0x80000000>,
+		      <0x00000008 0x80000000 0 0x80000000>;
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <1 13 0xf08>,
+			     <1 14 0xf08>,
+			     <1 11 0xf08>,
+			     <1 10 0xf08>;
+		clock-frequency = <100000000>;
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <0 60 4>,
+			     <0 61 4>,
+			     <0 62 4>,
+			     <0 63 4>;
+	};
+
+	smb {
+		compatible = "arm,vexpress,v2m-p1", "simple-bus";
+		arm,v2m-memory-map = "rs1";
+		#address-cells = <2>; /* SMB chipselect number and offset */
+		#size-cells = <1>;
+
+		ranges = <0 0 0 0x08000000 0x04000000>,
+			 <1 0 0 0x14000000 0x04000000>,
+			 <2 0 0 0x18000000 0x04000000>,
+			 <3 0 0 0x1c000000 0x04000000>,
+			 <4 0 0 0x0c000000 0x04000000>,
+			 <5 0 0 0x10000000 0x04000000>;
+
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 63>;
+		interrupt-map = <0 0  0 &gic 0 0 0  0 4>,
+				<0 0  1 &gic 0 0 0  1 4>,
+				<0 0  2 &gic 0 0 0  2 4>,
+				<0 0  3 &gic 0 0 0  3 4>,
+				<0 0  4 &gic 0 0 0  4 4>,
+				<0 0  5 &gic 0 0 0  5 4>,
+				<0 0  6 &gic 0 0 0  6 4>,
+				<0 0  7 &gic 0 0 0  7 4>,
+				<0 0  8 &gic 0 0 0  8 4>,
+				<0 0  9 &gic 0 0 0  9 4>,
+				<0 0 10 &gic 0 0 0 10 4>,
+				<0 0 11 &gic 0 0 0 11 4>,
+				<0 0 12 &gic 0 0 0 12 4>,
+				<0 0 13 &gic 0 0 0 13 4>,
+				<0 0 14 &gic 0 0 0 14 4>,
+				<0 0 15 &gic 0 0 0 15 4>,
+				<0 0 16 &gic 0 0 0 16 4>,
+				<0 0 17 &gic 0 0 0 17 4>,
+				<0 0 18 &gic 0 0 0 18 4>,
+				<0 0 19 &gic 0 0 0 19 4>,
+				<0 0 20 &gic 0 0 0 20 4>,
+				<0 0 21 &gic 0 0 0 21 4>,
+				<0 0 22 &gic 0 0 0 22 4>,
+				<0 0 23 &gic 0 0 0 23 4>,
+				<0 0 24 &gic 0 0 0 24 4>,
+				<0 0 25 &gic 0 0 0 25 4>,
+				<0 0 26 &gic 0 0 0 26 4>,
+				<0 0 27 &gic 0 0 0 27 4>,
+				<0 0 28 &gic 0 0 0 28 4>,
+				<0 0 29 &gic 0 0 0 29 4>,
+				<0 0 30 &gic 0 0 0 30 4>,
+				<0 0 31 &gic 0 0 0 31 4>,
+				<0 0 32 &gic 0 0 0 32 4>,
+				<0 0 33 &gic 0 0 0 33 4>,
+				<0 0 34 &gic 0 0 0 34 4>,
+				<0 0 35 &gic 0 0 0 35 4>,
+				<0 0 36 &gic 0 0 0 36 4>,
+				<0 0 37 &gic 0 0 0 37 4>,
+				<0 0 38 &gic 0 0 0 38 4>,
+				<0 0 39 &gic 0 0 0 39 4>,
+				<0 0 40 &gic 0 0 0 40 4>,
+				<0 0 41 &gic 0 0 0 41 4>,
+				<0 0 42 &gic 0 0 0 42 4>;
+
+		ethernet@2,02000000 {
+			compatible = "smsc,lan91c111";
+			reg = <2 0x02000000 0x10000>;
+			interrupts = <15>;
+		};
+
+		v2m_clk24mhz: clk24mhz {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <24000000>;
+			clock-output-names = "v2m:clk24mhz";
+		};
+
+		v2m_refclk1mhz: refclk1mhz {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <1000000>;
+			clock-output-names = "v2m:refclk1mhz";
+		};
+
+		v2m_refclk32khz: refclk32khz {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+			clock-output-names = "v2m:refclk32khz";
+		};
+
+		iofpga@3,00000000 {
+			compatible = "arm,amba-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 3 0 0x200000>;
+
+			v2m_sysreg: sysreg@010000 {
+				compatible = "arm,vexpress-sysreg";
+				reg = <0x010000 0x1000>;
+			};
+
+			v2m_serial0: uart@090000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0x090000 0x1000>;
+				interrupts = <5>;
+				clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
+				clock-names = "uartclk", "apb_pclk";
+			};
+
+			v2m_serial1: uart@0a0000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0x0a0000 0x1000>;
+				interrupts = <6>;
+				clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
+				clock-names = "uartclk", "apb_pclk";
+			};
+
+			v2m_serial2: uart@0b0000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0x0b0000 0x1000>;
+				interrupts = <7>;
+				clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
+				clock-names = "uartclk", "apb_pclk";
+			};
+
+			v2m_serial3: uart@0c0000 {
+				compatible = "arm,pl011", "arm,primecell";
+				reg = <0x0c0000 0x1000>;
+				interrupts = <8>;
+				clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
+				clock-names = "uartclk", "apb_pclk";
+			};
+
+			virtio_block@0130000 {
+				compatible = "virtio,mmio";
+				reg = <0x130000 0x200>;
+				interrupts = <42>;
+			};
+		};
+	};
+};