Merge tag 'drm-misc-next-2017-10-12' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

More 4.15 drm-misc stuff:

Cross-subsystem Changes:
- bridge cleanup refactor (Benjamin Gaignard)

Core Changes:
- less surprising atomic iterators (Maarten), fixes an oops introduced
  in drm-next
- better gem/fb helper docs (Noralf)
- fix dma-buf rcu races (Christian König)

Driver Changes:
- adv7511: CEC support (Hans Verkuil)
- sun4i update from Chen-Yu to improve hdmi and A31 support
- sii8620: add remote control support (Maceiej Purski)

New drivers:
- SiI9234 bridge driver (Maciej Purski)
- 7" rpi touch panel (Eric Anholt)

Note that this contains a topic pull from regmap, needed by the sun4i
changes. Mark Brown sent that out for pulling into drm-misc.

* tag 'drm-misc-next-2017-10-12' of git://anongit.freedesktop.org/drm/drm-misc: (29 commits)
  drm/dp: WARN about invalid/unknown link rates and bw codes
  drm/msm/mdp5: remove less than 0 comparison for unsigned value
  drm/bridge/sii8620: add remote control support
  drm/sun4i: hdmi: Add support for A31's HDMI controller
  drm/sun4i: hdmi: Add A31 specific DDC register definitions
  drm/sun4i: hdmi: Add support for controller hardware variants
  dt-bindings: display: sun4i: Add binding for A31 HDMI controller
  drm/sun4i: hdmi: Allow using second PLL as TMDS clk parent
  drm/sun4i: hdmi: create a regmap for later use
  drm/sun4i: hdmi: Disable clks in bind function error path and unbind function
  drm/sun4i: tcon: Add support for demuxing TCON output on A31
  drm/sun4i: tcon: Add variant callback for TCON output muxing
  drm/bridge/synopsys: dsi :remove is_panel_bridge
  drm/vc4: remove bridge from driver internal structure
  drm/stm: ltdc: remove bridge from driver internal structure
  drm/drm_of: add drm_of_panel_bridge_remove function
  drm/bridge: make drm_panel_bridge_remove more robust
  dma-fence: fix dma_fence_get_rcu_safe v2
  dma-buf: make reservation_object_copy_fences rcu save
  drm/atomic: Unref duplicated drm_atomic_state in drm_atomic_helper_resume()
  ...

Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt

@@ -68,6 +68,8 @@ Optional properties:
 - adi,disable-timing-generator: Only for ADV7533. Disables the internal timing
   generator. The chip will rely on the sync signals in the DSI data lanes,
   rather than generate its own timings for HDMI output.
+- clocks: from common clock binding: reference to the CEC clock.
+- clock-names: from common clock binding: must be "cec".
 
 Required nodes:
 
@@ -89,6 +91,8 @@ Example
 		reg = <39>;
 		interrupt-parent = <&gpio3>;
 		interrupts = <29 IRQ_TYPE_EDGE_FALLING>;
+		clocks = <&cec_clock>;
+		clock-names = "cec";
 
 		adi,input-depth = <8>;
 		adi,input-colorspace = "rgb";

Documentation/devicetree/bindings/display/bridge/sii9234.txt

@@ -0,0 +1,49 @@
+Silicon Image SiI9234 HDMI/MHL bridge bindings
+
+Required properties:
+	- compatible : "sil,sii9234".
+	- reg : I2C address for TPI interface, use 0x39
+	- avcc33-supply : MHL/USB Switch Supply Voltage (3.3V)
+	- iovcc18-supply : I/O Supply Voltage (1.8V)
+	- avcc12-supply : TMDS Analog Supply Voltage (1.2V)
+	- cvcc12-supply : Digital Core Supply Voltage (1.2V)
+	- interrupts, interrupt-parent: interrupt specifier of INT pin
+	- reset-gpios: gpio specifier of RESET pin (active low)
+	- video interfaces: Device node can contain two video interface port
+			    nodes for HDMI encoder and connector according to [1].
+			    - port@0 - MHL to HDMI
+			    - port@1 - MHL to connector
+
+[1]: Documentation/devicetree/bindings/media/video-interfaces.txt
+
+
+Example:
+	sii9234@39 {
+		compatible = "sil,sii9234";
+		reg = <0x39>;
+		avcc33-supply = <&vcc33mhl>;
+		iovcc18-supply = <&vcc18mhl>;
+		avcc12-supply = <&vsil12>;
+		cvcc12-supply = <&vsil12>;
+		reset-gpios = <&gpf3 4 GPIO_ACTIVE_LOW>;
+		interrupt-parent = <&gpf3>;
+		interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				mhl_to_hdmi: endpoint {
+					remote-endpoint = <&hdmi_to_mhl>;
+				};
+			};
+			port@1 {
+				reg = <1>;
+				mhl_to_connector: endpoint {
+					remote-endpoint = <&connector_to_mhl>;
+				};
+			};
+		};
+	};

Documentation/devicetree/bindings/display/panel/raspberrypi,7inch-touchscreen.txt

@@ -0,0 +1,49 @@
+This binding covers the official 7" (800x480) Raspberry Pi touchscreen
+panel.
+
+This DSI panel contains:
+
+- TC358762 DSI->DPI bridge
+- Atmel microcontroller on I2C for power sequencing the DSI bridge and
+  controlling backlight
+- Touchscreen controller on I2C for touch input
+
+and this binding covers the DSI display parts but not its touch input.
+
+Required properties:
+- compatible:	Must be "raspberrypi,7inch-touchscreen-panel"
+- reg:		Must be "45"
+- port:		See panel-common.txt
+
+Example:
+
+dsi1: dsi@7e700000 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	<...>
+
+	port {
+		dsi_out_port: endpoint {
+			remote-endpoint = <&panel_dsi_port>;
+		};
+	};
+};
+
+i2c_dsi: i2c {
+	compatible = "i2c-gpio";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	gpios = <&gpio 28 0
+		 &gpio 29 0>;
+
+	lcd@45 {
+		compatible = "raspberrypi,7inch-touchscreen-panel";
+		reg = <0x45>;
+
+		port {
+			panel_dsi_port: endpoint {
+				remote-endpoint = <&dsi_out_port>;
+			};
+		};
+	};
+};

Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt

@@ -41,14 +41,17 @@ CEC. It is one end of the pipeline.
 Required properties:
   - compatible: value must be one of:
     * allwinner,sun5i-a10s-hdmi
+    * allwinner,sun6i-a31-hdmi
   - reg: base address and size of memory-mapped region
   - interrupts: interrupt associated to this IP
   - clocks: phandles to the clocks feeding the HDMI encoder
     * ahb: the HDMI interface clock
     * mod: the HDMI module clock
+    * ddc: the HDMI ddc clock (A31 only)
     * pll-0: the first video PLL
     * pll-1: the second video PLL
   - clock-names: the clock names mentioned above
+  - resets: phandle to the reset control for the HDMI encoder (A31 only)
   - dmas: phandles to the DMA channels used by the HDMI encoder
     * ddc-tx: The channel for DDC transmission
     * ddc-rx: The channel for DDC reception

drivers/dma-buf/reservation.c

@@ -266,8 +266,7 @@ EXPORT_SYMBOL(reservation_object_add_excl_fence);
 * @dst: the destination reservation object
 * @src: the source reservation object
 *
-* Copy all fences from src to dst. Both src->lock as well as dst-lock must be
-* held.
+* Copy all fences from src to dst. dst-lock must be held.
 */
 int reservation_object_copy_fences(struct reservation_object *dst,
 				   struct reservation_object *src)
@@ -277,33 +276,62 @@ int reservation_object_copy_fences(struct reservation_object *dst,
 	size_t size;
 	unsigned i;
 
-	src_list = reservation_object_get_list(src);
+	rcu_read_lock();
+	src_list = rcu_dereference(src->fence);
 
+retry:
 	if (src_list) {
-		size = offsetof(typeof(*src_list),
-				shared[src_list->shared_count]);
+		unsigned shared_count = src_list->shared_count;
+
+		size = offsetof(typeof(*src_list), shared[shared_count]);
+		rcu_read_unlock();
+
 		dst_list = kmalloc(size, GFP_KERNEL);
 		if (!dst_list)
 			return -ENOMEM;
 
-		dst_list->shared_count = src_list->shared_count;
-		dst_list->shared_max = src_list->shared_count;
-		for (i = 0; i < src_list->shared_count; ++i)
-			dst_list->shared[i] =
-				dma_fence_get(src_list->shared[i]);
+		rcu_read_lock();
+		src_list = rcu_dereference(src->fence);
+		if (!src_list || src_list->shared_count > shared_count) {
+			kfree(dst_list);
+			goto retry;
+		}
+
+		dst_list->shared_count = 0;
+		dst_list->shared_max = shared_count;
+		for (i = 0; i < src_list->shared_count; ++i) {
+			struct dma_fence *fence;
+
+			fence = rcu_dereference(src_list->shared[i]);
+			if (test_bit(DMA_FENCE_FLAG_SIGNALED_BIT,
+				     &fence->flags))
+				continue;
+
+			if (!dma_fence_get_rcu(fence)) {
+				kfree(dst_list);
+				src_list = rcu_dereference(src->fence);
+				goto retry;
+			}
+
+			if (dma_fence_is_signaled(fence)) {
+				dma_fence_put(fence);
+				continue;
+			}
+
+			dst_list->shared[dst_list->shared_count++] = fence;
+		}
 	} else {
 		dst_list = NULL;
 	}
 
+	new = dma_fence_get_rcu_safe(&src->fence_excl);
+	rcu_read_unlock();
+
 	kfree(dst->staged);
 	dst->staged = NULL;
 
 	src_list = reservation_object_get_list(dst);
-
 	old = reservation_object_get_excl(dst);
-	new = reservation_object_get_excl(src);
-
-	dma_fence_get(new);
 
 	preempt_disable();
 	write_seqcount_begin(&dst->seq);

drivers/gpu/drm/bridge/Kconfig

@@ -71,7 +71,7 @@ config DRM_PARADE_PS8622
 
 config DRM_SIL_SII8620
 	tristate "Silicon Image SII8620 HDMI/MHL bridge"
-	depends on OF
+	depends on OF && RC_CORE
 	select DRM_KMS_HELPER
 	help
 	  Silicon Image SII8620 HDMI/MHL bridge chip driver.
@@ -84,6 +84,14 @@ config DRM_SII902X
 	---help---
 	  Silicon Image sii902x bridge chip driver.
 
+config DRM_SII9234
+	tristate "Silicon Image SII9234 HDMI/MHL bridge"
+	depends on OF
+	---help---
+	  Say Y here if you want support for the MHL interface.
+	  It is an I2C driver, that detects connection of MHL bridge
+	  and starts encapsulation of HDMI signal.
+
 config DRM_TOSHIBA_TC358767
 	tristate "Toshiba TC358767 eDP bridge"
 	depends on OF

drivers/gpu/drm/bridge/Makefile

@@ -6,6 +6,7 @@ obj-$(CONFIG_DRM_NXP_PTN3460) += nxp-ptn3460.o
 obj-$(CONFIG_DRM_PARADE_PS8622) += parade-ps8622.o
 obj-$(CONFIG_DRM_SIL_SII8620) += sil-sii8620.o
 obj-$(CONFIG_DRM_SII902X) += sii902x.o
+obj-$(CONFIG_DRM_SII9234) += sii9234.o
 obj-$(CONFIG_DRM_TOSHIBA_TC358767) += tc358767.o
 obj-$(CONFIG_DRM_ANALOGIX_DP) += analogix/
 obj-$(CONFIG_DRM_I2C_ADV7511) += adv7511/

drivers/gpu/drm/bridge/adv7511/Kconfig

@@ -21,3 +21,11 @@ config DRM_I2C_ADV7533
 	default y
 	help
 	  Support for the Analog Devices ADV7533 DSI to HDMI encoder.
+
+config DRM_I2C_ADV7511_CEC
+	bool "ADV7511/33 HDMI CEC driver"
+	depends on DRM_I2C_ADV7511
+	select CEC_CORE
+	default y
+	help
+	  When selected the HDMI transmitter will support the CEC feature.

drivers/gpu/drm/bridge/adv7511/Makefile

@@ -1,4 +1,5 @@
 adv7511-y := adv7511_drv.o
 adv7511-$(CONFIG_DRM_I2C_ADV7511_AUDIO) += adv7511_audio.o
+adv7511-$(CONFIG_DRM_I2C_ADV7511_CEC) += adv7511_cec.o
 adv7511-$(CONFIG_DRM_I2C_ADV7533) += adv7533.o
 obj-$(CONFIG_DRM_I2C_ADV7511) += adv7511.o

drivers/gpu/drm/bridge/adv7511/adv7511.h

@@ -195,6 +195,25 @@
 #define ADV7511_PACKET_GM(x)	    ADV7511_PACKET(5, x)
 #define ADV7511_PACKET_SPARE(x)	    ADV7511_PACKET(6, x)
 
+#define ADV7511_REG_CEC_TX_FRAME_HDR	0x00
+#define ADV7511_REG_CEC_TX_FRAME_DATA0	0x01
+#define ADV7511_REG_CEC_TX_FRAME_LEN	0x10
+#define ADV7511_REG_CEC_TX_ENABLE	0x11
+#define ADV7511_REG_CEC_TX_RETRY	0x12
+#define ADV7511_REG_CEC_TX_LOW_DRV_CNT	0x14
+#define ADV7511_REG_CEC_RX_FRAME_HDR	0x15
+#define ADV7511_REG_CEC_RX_FRAME_DATA0	0x16
+#define ADV7511_REG_CEC_RX_FRAME_LEN	0x25
+#define ADV7511_REG_CEC_RX_ENABLE	0x26
+#define ADV7511_REG_CEC_RX_BUFFERS	0x4a
+#define ADV7511_REG_CEC_LOG_ADDR_MASK	0x4b
+#define ADV7511_REG_CEC_LOG_ADDR_0_1	0x4c
+#define ADV7511_REG_CEC_LOG_ADDR_2	0x4d
+#define ADV7511_REG_CEC_CLK_DIV		0x4e
+#define ADV7511_REG_CEC_SOFT_RESET	0x50
+
+#define ADV7533_REG_CEC_OFFSET		0x70
+
 enum adv7511_input_clock {
 	ADV7511_INPUT_CLOCK_1X,
 	ADV7511_INPUT_CLOCK_2X,
@@ -297,6 +316,8 @@ enum adv7511_type {
 	ADV7533,
 };
 
+#define ADV7511_MAX_ADDRS 3
+
 struct adv7511 {
 	struct i2c_client *i2c_main;
 	struct i2c_client *i2c_edid;
@@ -341,15 +362,27 @@ struct adv7511 {
 
 	enum adv7511_type type;
 	struct platform_device *audio_pdev;
+
+	struct cec_adapter *cec_adap;
+	u8   cec_addr[ADV7511_MAX_ADDRS];
+	u8   cec_valid_addrs;
+	bool cec_enabled_adap;
+	struct clk *cec_clk;
+	u32 cec_clk_freq;
 };
 
+#ifdef CONFIG_DRM_I2C_ADV7511_CEC
+int adv7511_cec_init(struct device *dev, struct adv7511 *adv7511,
+		     unsigned int offset);
+void adv7511_cec_irq_process(struct adv7511 *adv7511, unsigned int irq1);
+#endif
+
 #ifdef CONFIG_DRM_I2C_ADV7533
 void adv7533_dsi_power_on(struct adv7511 *adv);
 void adv7533_dsi_power_off(struct adv7511 *adv);
 void adv7533_mode_set(struct adv7511 *adv, struct drm_display_mode *mode);
 int adv7533_patch_registers(struct adv7511 *adv);
-void adv7533_uninit_cec(struct adv7511 *adv);
-int adv7533_init_cec(struct adv7511 *adv);
+int adv7533_patch_cec_registers(struct adv7511 *adv);
 int adv7533_attach_dsi(struct adv7511 *adv);
 void adv7533_detach_dsi(struct adv7511 *adv);
 int adv7533_parse_dt(struct device_node *np, struct adv7511 *adv);
@@ -372,11 +405,7 @@ static inline int adv7533_patch_registers(struct adv7511 *adv)
 	return -ENODEV;
 }
 
-static inline void adv7533_uninit_cec(struct adv7511 *adv)
-{
-}
-
-static inline int adv7533_init_cec(struct adv7511 *adv)
+static inline int adv7533_patch_cec_registers(struct adv7511 *adv)
 {
 	return -ENODEV;
 }

drivers/gpu/drm/bridge/adv7511/adv7511_cec.c

@@ -0,0 +1,337 @@
+/*
+ * adv7511_cec.c - Analog Devices ADV7511/33 cec driver
+ *
+ * Copyright 2017 Cisco Systems, Inc. and/or its affiliates. All rights reserved.
+ *
+ * This program is free software; you may redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ *
+ */
+
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/slab.h>
+#include <linux/clk.h>
+
+#include <media/cec.h>
+
+#include "adv7511.h"
+
+#define ADV7511_INT1_CEC_MASK \
+	(ADV7511_INT1_CEC_TX_READY | ADV7511_INT1_CEC_TX_ARBIT_LOST | \
+	 ADV7511_INT1_CEC_TX_RETRY_TIMEOUT | ADV7511_INT1_CEC_RX_READY1)
+
+static void adv_cec_tx_raw_status(struct adv7511 *adv7511, u8 tx_raw_status)
+{
+	unsigned int offset = adv7511->type == ADV7533 ?
+					ADV7533_REG_CEC_OFFSET : 0;
+	unsigned int val;
+
+	if (regmap_read(adv7511->regmap_cec,
+			ADV7511_REG_CEC_TX_ENABLE + offset, &val))
+		return;
+
+	if ((val & 0x01) == 0)
+		return;
+
+	if (tx_raw_status & ADV7511_INT1_CEC_TX_ARBIT_LOST) {
+		cec_transmit_attempt_done(adv7511->cec_adap,
+					  CEC_TX_STATUS_ARB_LOST);
+		return;
+	}
+	if (tx_raw_status & ADV7511_INT1_CEC_TX_RETRY_TIMEOUT) {
+		u8 status;
+		u8 err_cnt = 0;
+		u8 nack_cnt = 0;
+		u8 low_drive_cnt = 0;
+		unsigned int cnt;
+
+		/*
+		 * We set this status bit since this hardware performs
+		 * retransmissions.
+		 */
+		status = CEC_TX_STATUS_MAX_RETRIES;
+		if (regmap_read(adv7511->regmap_cec,
+			    ADV7511_REG_CEC_TX_LOW_DRV_CNT + offset, &cnt)) {
+			err_cnt = 1;
+			status |= CEC_TX_STATUS_ERROR;
+		} else {
+			nack_cnt = cnt & 0xf;
+			if (nack_cnt)
+				status |= CEC_TX_STATUS_NACK;
+			low_drive_cnt = cnt >> 4;
+			if (low_drive_cnt)
+				status |= CEC_TX_STATUS_LOW_DRIVE;
+		}
+		cec_transmit_done(adv7511->cec_adap, status,
+				  0, nack_cnt, low_drive_cnt, err_cnt);
+		return;
+	}
+	if (tx_raw_status & ADV7511_INT1_CEC_TX_READY) {
+		cec_transmit_attempt_done(adv7511->cec_adap, CEC_TX_STATUS_OK);
+		return;
+	}
+}
+
+void adv7511_cec_irq_process(struct adv7511 *adv7511, unsigned int irq1)
+{
+	unsigned int offset = adv7511->type == ADV7533 ?
+					ADV7533_REG_CEC_OFFSET : 0;
+	const u32 irq_tx_mask = ADV7511_INT1_CEC_TX_READY |
+				ADV7511_INT1_CEC_TX_ARBIT_LOST |
+				ADV7511_INT1_CEC_TX_RETRY_TIMEOUT;
+	struct cec_msg msg = {};
+	unsigned int len;
+	unsigned int val;
+	u8 i;
+
+	if (irq1 & irq_tx_mask)
+		adv_cec_tx_raw_status(adv7511, irq1);
+
+	if (!(irq1 & ADV7511_INT1_CEC_RX_READY1))
+		return;
+
+	if (regmap_read(adv7511->regmap_cec,
+			ADV7511_REG_CEC_RX_FRAME_LEN + offset, &len))
+		return;
+
+	msg.len = len & 0x1f;
+
+	if (msg.len > 16)
+		msg.len = 16;
+
+	if (!msg.len)
+		return;
+
+	for (i = 0; i < msg.len; i++) {
+		regmap_read(adv7511->regmap_cec,
+			    i + ADV7511_REG_CEC_RX_FRAME_HDR + offset, &val);
+		msg.msg[i] = val;
+	}
+
+	/* toggle to re-enable rx 1 */
+	regmap_write(adv7511->regmap_cec,
+		     ADV7511_REG_CEC_RX_BUFFERS + offset, 1);
+	regmap_write(adv7511->regmap_cec,
+		     ADV7511_REG_CEC_RX_BUFFERS + offset, 0);
+	cec_received_msg(adv7511->cec_adap, &msg);
+}
+
+static int adv7511_cec_adap_enable(struct cec_adapter *adap, bool enable)
+{
+	struct adv7511 *adv7511 = cec_get_drvdata(adap);
+	unsigned int offset = adv7511->type == ADV7533 ?
+					ADV7533_REG_CEC_OFFSET : 0;
+
+	if (adv7511->i2c_cec == NULL)
+		return -EIO;
+
+	if (!adv7511->cec_enabled_adap && enable) {
+		/* power up cec section */
+		regmap_update_bits(adv7511->regmap_cec,
+				   ADV7511_REG_CEC_CLK_DIV + offset,
+				   0x03, 0x01);
+		/* legacy mode and clear all rx buffers */
+		regmap_write(adv7511->regmap_cec,
+			     ADV7511_REG_CEC_RX_BUFFERS + offset, 0x07);
+		regmap_write(adv7511->regmap_cec,
+			     ADV7511_REG_CEC_RX_BUFFERS + offset, 0);
+		/* initially disable tx */
+		regmap_update_bits(adv7511->regmap_cec,
+				   ADV7511_REG_CEC_TX_ENABLE + offset, 1, 0);
+		/* enabled irqs: */
+		/* tx: ready */
+		/* tx: arbitration lost */
+		/* tx: retry timeout */
+		/* rx: ready 1 */
+		regmap_update_bits(adv7511->regmap,
+				   ADV7511_REG_INT_ENABLE(1), 0x3f,
+				   ADV7511_INT1_CEC_MASK);
+	} else if (adv7511->cec_enabled_adap && !enable) {
+		regmap_update_bits(adv7511->regmap,
+				   ADV7511_REG_INT_ENABLE(1), 0x3f, 0);
+		/* disable address mask 1-3 */
+		regmap_update_bits(adv7511->regmap_cec,
+				   ADV7511_REG_CEC_LOG_ADDR_MASK + offset,
+				   0x70, 0x00);
+		/* power down cec section */
+		regmap_update_bits(adv7511->regmap_cec,
+				   ADV7511_REG_CEC_CLK_DIV + offset,
+				   0x03, 0x00);
+		adv7511->cec_valid_addrs = 0;
+	}
+	adv7511->cec_enabled_adap = enable;
+	return 0;
+}
+
+static int adv7511_cec_adap_log_addr(struct cec_adapter *adap, u8 addr)
+{
+	struct adv7511 *adv7511 = cec_get_drvdata(adap);
+	unsigned int offset = adv7511->type == ADV7533 ?
+					ADV7533_REG_CEC_OFFSET : 0;
+	unsigned int i, free_idx = ADV7511_MAX_ADDRS;
+
+	if (!adv7511->cec_enabled_adap)
+		return addr == CEC_LOG_ADDR_INVALID ? 0 : -EIO;
+
+	if (addr == CEC_LOG_ADDR_INVALID) {
+		regmap_update_bits(adv7511->regmap_cec,
+				   ADV7511_REG_CEC_LOG_ADDR_MASK + offset,
+				   0x70, 0);
+		adv7511->cec_valid_addrs = 0;
+		return 0;
+	}
+
+	for (i = 0; i < ADV7511_MAX_ADDRS; i++) {
+		bool is_valid = adv7511->cec_valid_addrs & (1 << i);
+
+		if (free_idx == ADV7511_MAX_ADDRS && !is_valid)
+			free_idx = i;
+		if (is_valid && adv7511->cec_addr[i] == addr)
+			return 0;
+	}
+	if (i == ADV7511_MAX_ADDRS) {
+		i = free_idx;
+		if (i == ADV7511_MAX_ADDRS)
+			return -ENXIO;
+	}
+	adv7511->cec_addr[i] = addr;
+	adv7511->cec_valid_addrs |= 1 << i;
+
+	switch (i) {
+	case 0:
+		/* enable address mask 0 */
+		regmap_update_bits(adv7511->regmap_cec,
+				   ADV7511_REG_CEC_LOG_ADDR_MASK + offset,
+				   0x10, 0x10);
+		/* set address for mask 0 */
+		regmap_update_bits(adv7511->regmap_cec,
+				   ADV7511_REG_CEC_LOG_ADDR_0_1 + offset,
+				   0x0f, addr);
+		break;
+	case 1:
+		/* enable address mask 1 */
+		regmap_update_bits(adv7511->regmap_cec,
+				   ADV7511_REG_CEC_LOG_ADDR_MASK + offset,
+				   0x20, 0x20);
+		/* set address for mask 1 */
+		regmap_update_bits(adv7511->regmap_cec,
+				   ADV7511_REG_CEC_LOG_ADDR_0_1 + offset,
+				   0xf0, addr << 4);
+		break;
+	case 2:
+		/* enable address mask 2 */
+		regmap_update_bits(adv7511->regmap_cec,
+				   ADV7511_REG_CEC_LOG_ADDR_MASK + offset,
+				   0x40, 0x40);
+		/* set address for mask 1 */
+		regmap_update_bits(adv7511->regmap_cec,
+				   ADV7511_REG_CEC_LOG_ADDR_2 + offset,
+				   0x0f, addr);
+		break;
+	}
+	return 0;
+}
+
+static int adv7511_cec_adap_transmit(struct cec_adapter *adap, u8 attempts,
+				     u32 signal_free_time, struct cec_msg *msg)
+{
+	struct adv7511 *adv7511 = cec_get_drvdata(adap);
+	unsigned int offset = adv7511->type == ADV7533 ?
+					ADV7533_REG_CEC_OFFSET : 0;
+	u8 len = msg->len;
+	unsigned int i;
+
+	/*
+	 * The number of retries is the number of attempts - 1, but retry
+	 * at least once. It's not clear if a value of 0 is allowed, so
+	 * let's do at least one retry.
+	 */
+	regmap_update_bits(adv7511->regmap_cec,
+			   ADV7511_REG_CEC_TX_RETRY + offset,
+			   0x70, max(1, attempts - 1) << 4);
+
+	/* blocking, clear cec tx irq status */
+	regmap_update_bits(adv7511->regmap, ADV7511_REG_INT(1), 0x38, 0x38);
+
+	/* write data */
+	for (i = 0; i < len; i++)
+		regmap_write(adv7511->regmap_cec,
+			     i + ADV7511_REG_CEC_TX_FRAME_HDR + offset,
+			     msg->msg[i]);
+
+	/* set length (data + header) */
+	regmap_write(adv7511->regmap_cec,
+		     ADV7511_REG_CEC_TX_FRAME_LEN + offset, len);
+	/* start transmit, enable tx */
+	regmap_write(adv7511->regmap_cec,
+		     ADV7511_REG_CEC_TX_ENABLE + offset, 0x01);
+	return 0;
+}
+
+static const struct cec_adap_ops adv7511_cec_adap_ops = {
+	.adap_enable = adv7511_cec_adap_enable,
+	.adap_log_addr = adv7511_cec_adap_log_addr,
+	.adap_transmit = adv7511_cec_adap_transmit,
+};
+
+static int adv7511_cec_parse_dt(struct device *dev, struct adv7511 *adv7511)
+{
+	adv7511->cec_clk = devm_clk_get(dev, "cec");
+	if (IS_ERR(adv7511->cec_clk)) {
+		int ret = PTR_ERR(adv7511->cec_clk);
+
+		adv7511->cec_clk = NULL;
+		return ret;
+	}
+	clk_prepare_enable(adv7511->cec_clk);
+	adv7511->cec_clk_freq = clk_get_rate(adv7511->cec_clk);
+	return 0;
+}
+
+int adv7511_cec_init(struct device *dev, struct adv7511 *adv7511,
+		     unsigned int offset)
+{
+	int ret = adv7511_cec_parse_dt(dev, adv7511);
+
+	if (ret)
+		return ret;
+
+	adv7511->cec_adap = cec_allocate_adapter(&adv7511_cec_adap_ops,
+		adv7511, dev_name(dev), CEC_CAP_DEFAULTS, ADV7511_MAX_ADDRS);
+	if (IS_ERR(adv7511->cec_adap))
+		return PTR_ERR(adv7511->cec_adap);
+
+	regmap_write(adv7511->regmap, ADV7511_REG_CEC_CTRL + offset, 0);
+	/* cec soft reset */
+	regmap_write(adv7511->regmap_cec,
+		     ADV7511_REG_CEC_SOFT_RESET + offset, 0x01);
+	regmap_write(adv7511->regmap_cec,
+		     ADV7511_REG_CEC_SOFT_RESET + offset, 0x00);
+
+	/* legacy mode */
+	regmap_write(adv7511->regmap_cec,
+		     ADV7511_REG_CEC_RX_BUFFERS + offset, 0x00);
+
+	regmap_write(adv7511->regmap_cec,
+		     ADV7511_REG_CEC_CLK_DIV + offset,
+		     ((adv7511->cec_clk_freq / 750000) - 1) << 2);
+
+	ret = cec_register_adapter(adv7511->cec_adap, dev);
+	if (ret) {
+		cec_delete_adapter(adv7511->cec_adap);
+		adv7511->cec_adap = NULL;
+	}
+	return ret;
+}

drivers/gpu/drm/bridge/adv7511/adv7511_drv.c

@@ -11,12 +11,15 @@
 #include <linux/module.h>
 #include <linux/of_device.h>
 #include <linux/slab.h>
+#include <linux/clk.h>
 
 #include <drm/drmP.h>
 #include <drm/drm_atomic.h>
 #include <drm/drm_atomic_helper.h>
 #include <drm/drm_edid.h>
 
+#include <media/cec.h>
+
 #include "adv7511.h"
 
 /* ADI recommended values for proper operation. */
@@ -336,8 +339,10 @@ static void __adv7511_power_on(struct adv7511 *adv7511)
 		 */
 		regmap_write(adv7511->regmap, ADV7511_REG_INT_ENABLE(0),
 			     ADV7511_INT0_EDID_READY | ADV7511_INT0_HPD);
-		regmap_write(adv7511->regmap, ADV7511_REG_INT_ENABLE(1),
-			     ADV7511_INT1_DDC_ERROR);
+		regmap_update_bits(adv7511->regmap,
+				   ADV7511_REG_INT_ENABLE(1),
+				   ADV7511_INT1_DDC_ERROR,
+				   ADV7511_INT1_DDC_ERROR);
 	}
 
 	/*
@@ -373,6 +378,9 @@ static void __adv7511_power_off(struct adv7511 *adv7511)
 	regmap_update_bits(adv7511->regmap, ADV7511_REG_POWER,
 			   ADV7511_POWER_POWER_DOWN,
 			   ADV7511_POWER_POWER_DOWN);
+	regmap_update_bits(adv7511->regmap,
+			   ADV7511_REG_INT_ENABLE(1),
+			   ADV7511_INT1_DDC_ERROR, 0);
 	regcache_mark_dirty(adv7511->regmap);
 }
 
@@ -423,6 +431,8 @@ static void adv7511_hpd_work(struct work_struct *work)
 
 	if (adv7511->connector.status != status) {
 		adv7511->connector.status = status;
+		if (status == connector_status_disconnected)
+			cec_phys_addr_invalidate(adv7511->cec_adap);
 		drm_kms_helper_hotplug_event(adv7511->connector.dev);
 	}
 }
@@ -453,6 +463,10 @@ static int adv7511_irq_process(struct adv7511 *adv7511, bool process_hpd)
 			wake_up_all(&adv7511->wq);
 	}
 
+#ifdef CONFIG_DRM_I2C_ADV7511_CEC
+	adv7511_cec_irq_process(adv7511, irq1);
+#endif
+
 	return 0;
 }
 
@@ -595,6 +609,8 @@ static int adv7511_get_modes(struct adv7511 *adv7511,
 
 	kfree(edid);
 
+	cec_s_phys_addr_from_edid(adv7511->cec_adap, edid);
+
 	return count;
 }
 
@@ -919,6 +935,65 @@ static void adv7511_uninit_regulators(struct adv7511 *adv)
 	regulator_bulk_disable(adv->num_supplies, adv->supplies);
 }
 
+static bool adv7511_cec_register_volatile(struct device *dev, unsigned int reg)
+{
+	struct i2c_client *i2c = to_i2c_client(dev);
+	struct adv7511 *adv7511 = i2c_get_clientdata(i2c);
+
+	if (adv7511->type == ADV7533)
+		reg -= ADV7533_REG_CEC_OFFSET;
+
+	switch (reg) {
+	case ADV7511_REG_CEC_RX_FRAME_HDR:
+	case ADV7511_REG_CEC_RX_FRAME_DATA0...
+		ADV7511_REG_CEC_RX_FRAME_DATA0 + 14:
+	case ADV7511_REG_CEC_RX_FRAME_LEN:
+	case ADV7511_REG_CEC_RX_BUFFERS:
+	case ADV7511_REG_CEC_TX_LOW_DRV_CNT:
+		return true;
+	}
+
+	return false;
+}
+
+static const struct regmap_config adv7511_cec_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+
+	.max_register = 0xff,
+	.cache_type = REGCACHE_RBTREE,
+	.volatile_reg = adv7511_cec_register_volatile,
+};
+
+static int adv7511_init_cec_regmap(struct adv7511 *adv)
+{
+	int ret;
+
+	adv->i2c_cec = i2c_new_dummy(adv->i2c_main->adapter,
+				     adv->i2c_main->addr - 1);
+	if (!adv->i2c_cec)
+		return -ENOMEM;
+	i2c_set_clientdata(adv->i2c_cec, adv);
+
+	adv->regmap_cec = devm_regmap_init_i2c(adv->i2c_cec,
+					&adv7511_cec_regmap_config);
+	if (IS_ERR(adv->regmap_cec)) {
+		ret = PTR_ERR(adv->regmap_cec);
+		goto err;
+	}
+
+	if (adv->type == ADV7533) {
+		ret = adv7533_patch_cec_registers(adv);
+		if (ret)
+			goto err;
+	}
+
+	return 0;
+err:
+	i2c_unregister_device(adv->i2c_cec);
+	return ret;
+}
+
 static int adv7511_parse_dt(struct device_node *np,
 			    struct adv7511_link_config *config)
 {
@@ -1009,6 +1084,7 @@ static int adv7511_probe(struct i2c_client *i2c, const struct i2c_device_id *id)
 	struct device *dev = &i2c->dev;
 	unsigned int main_i2c_addr = i2c->addr << 1;
 	unsigned int edid_i2c_addr = main_i2c_addr + 4;
+	unsigned int offset;
 	unsigned int val;
 	int ret;
 
@@ -1092,11 +1168,9 @@ static int adv7511_probe(struct i2c_client *i2c, const struct i2c_device_id *id)
 		goto uninit_regulators;
 	}
 
-	if (adv7511->type == ADV7533) {
-		ret = adv7533_init_cec(adv7511);
-		if (ret)
-			goto err_i2c_unregister_edid;
-	}
+	ret = adv7511_init_cec_regmap(adv7511);
+	if (ret)
+		goto err_i2c_unregister_edid;
 
 	INIT_WORK(&adv7511->hpd_work, adv7511_hpd_work);
 
@@ -1111,10 +1185,6 @@ static int adv7511_probe(struct i2c_client *i2c, const struct i2c_device_id *id)
 			goto err_unregister_cec;
 	}
 
-	/* CEC is unused for now */
-	regmap_write(adv7511->regmap, ADV7511_REG_CEC_CTRL,
-		     ADV7511_CEC_CTRL_POWER_DOWN);
-
 	adv7511_power_off(adv7511);
 
 	i2c_set_clientdata(i2c, adv7511);
@@ -1129,10 +1199,23 @@ static int adv7511_probe(struct i2c_client *i2c, const struct i2c_device_id *id)
 
 	adv7511_audio_init(dev, adv7511);
 
+	offset = adv7511->type == ADV7533 ? ADV7533_REG_CEC_OFFSET : 0;
+
+#ifdef CONFIG_DRM_I2C_ADV7511_CEC
+	ret = adv7511_cec_init(dev, adv7511, offset);
+	if (ret)
+		goto err_unregister_cec;
+#else
+	regmap_write(adv7511->regmap, ADV7511_REG_CEC_CTRL + offset,
+		     ADV7511_CEC_CTRL_POWER_DOWN);
+#endif
+
 	return 0;
 
 err_unregister_cec:
-	adv7533_uninit_cec(adv7511);
+	i2c_unregister_device(adv7511->i2c_cec);
+	if (adv7511->cec_clk)
+		clk_disable_unprepare(adv7511->cec_clk);
 err_i2c_unregister_edid:
 	i2c_unregister_device(adv7511->i2c_edid);
 uninit_regulators:
@@ -1145,10 +1228,11 @@ static int adv7511_remove(struct i2c_client *i2c)
 {
 	struct adv7511 *adv7511 = i2c_get_clientdata(i2c);
 
-	if (adv7511->type == ADV7533) {
+	if (adv7511->type == ADV7533)
 		adv7533_detach_dsi(adv7511);
-		adv7533_uninit_cec(adv7511);
-	}
+	i2c_unregister_device(adv7511->i2c_cec);
+	if (adv7511->cec_clk)
+		clk_disable_unprepare(adv7511->cec_clk);
 
 	adv7511_uninit_regulators(adv7511);
 
@@ -1156,6 +1240,8 @@ static int adv7511_remove(struct i2c_client *i2c)
 
 	adv7511_audio_exit(adv7511);
 
+	cec_unregister_adapter(adv7511->cec_adap);
+
 	i2c_unregister_device(adv7511->i2c_edid);
 
 	return 0;

drivers/gpu/drm/bridge/adv7511/adv7533.c

@@ -32,14 +32,6 @@ static const struct reg_sequence adv7533_cec_fixed_registers[] = {
 	{ 0x05, 0xc8 },
 };
 
-static const struct regmap_config adv7533_cec_regmap_config = {
-	.reg_bits = 8,
-	.val_bits = 8,
-
-	.max_register = 0xff,
-	.cache_type = REGCACHE_RBTREE,
-};
-
 static void adv7511_dsi_config_timing_gen(struct adv7511 *adv)
 {
 	struct mipi_dsi_device *dsi = adv->dsi;
@@ -145,37 +137,11 @@ int adv7533_patch_registers(struct adv7511 *adv)
 				     ARRAY_SIZE(adv7533_fixed_registers));
 }
 
-void adv7533_uninit_cec(struct adv7511 *adv)
-{
-	i2c_unregister_device(adv->i2c_cec);
-}
-
-int adv7533_init_cec(struct adv7511 *adv)
+int adv7533_patch_cec_registers(struct adv7511 *adv)
 {
-	int ret;
-
-	adv->i2c_cec = i2c_new_dummy(adv->i2c_main->adapter,
-				     adv->i2c_main->addr - 1);
-	if (!adv->i2c_cec)
-		return -ENOMEM;
-
-	adv->regmap_cec = devm_regmap_init_i2c(adv->i2c_cec,
-					&adv7533_cec_regmap_config);
-	if (IS_ERR(adv->regmap_cec)) {
-		ret = PTR_ERR(adv->regmap_cec);
-		goto err;
-	}
-
-	ret = regmap_register_patch(adv->regmap_cec,
+	return regmap_register_patch(adv->regmap_cec,
 				    adv7533_cec_fixed_registers,
 				    ARRAY_SIZE(adv7533_cec_fixed_registers));
-	if (ret)
-		goto err;
-
-	return 0;
-err:
-	adv7533_uninit_cec(adv);
-	return ret;
 }
 
 int adv7533_attach_dsi(struct adv7511 *adv)

drivers/gpu/drm/bridge/panel.c

@@ -188,7 +188,15 @@ EXPORT_SYMBOL(drm_panel_bridge_add);
  */
 void drm_panel_bridge_remove(struct drm_bridge *bridge)
 {
-	struct panel_bridge *panel_bridge = drm_bridge_to_panel_bridge(bridge);
+	struct panel_bridge *panel_bridge;
+
+	if (!bridge)
+		return;
+
+	if (bridge->funcs != &panel_bridge_bridge_funcs)
+		return;
+
+	panel_bridge = drm_bridge_to_panel_bridge(bridge);
 
 	drm_bridge_remove(bridge);
 	devm_kfree(panel_bridge->panel->dev, bridge);

drivers/gpu/drm/bridge/sii9234.c

@@ -0,0 +1,994 @@
+/*
+ * Copyright (C) 2017 Samsung Electronics
+ *
+ * Authors:
+ *    Tomasz Stanislawski <t.stanislaws@samsung.com>
+ *    Maciej Purski <m.purski@samsung.com>
+ *
+ * Based on sii9234 driver created by:
+ *    Adam Hampson <ahampson@sta.samsung.com>
+ *    Erik Gilling <konkers@android.com>
+ *    Shankar Bandal <shankar.b@samsung.com>
+ *    Dharam Kumar <dharam.kr@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program
+ *
+ */
+#include <drm/bridge/mhl.h>
+#include <drm/drm_crtc.h>
+#include <drm/drm_edid.h>
+
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/gpio/consumer.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/regulator/consumer.h>
+#include <linux/slab.h>
+
+#define CBUS_DEVCAP_OFFSET		0x80
+
+#define SII9234_MHL_VERSION		0x11
+#define SII9234_SCRATCHPAD_SIZE		0x10
+#define SII9234_INT_STAT_SIZE		0x33
+
+#define BIT_TMDS_CCTRL_TMDS_OE		BIT(4)
+#define MHL_HPD_OUT_OVR_EN		BIT(4)
+#define MHL_HPD_OUT_OVR_VAL		BIT(5)
+#define MHL_INIT_TIMEOUT		0x0C
+
+/* MHL Tx registers and bits */
+#define MHL_TX_SRST			0x05
+#define MHL_TX_SYSSTAT_REG		0x09
+#define MHL_TX_INTR1_REG		0x71
+#define MHL_TX_INTR4_REG		0x74
+#define MHL_TX_INTR1_ENABLE_REG		0x75
+#define MHL_TX_INTR4_ENABLE_REG		0x78
+#define MHL_TX_INT_CTRL_REG		0x79
+#define MHL_TX_TMDS_CCTRL		0x80
+#define MHL_TX_DISC_CTRL1_REG		0x90
+#define MHL_TX_DISC_CTRL2_REG		0x91
+#define MHL_TX_DISC_CTRL3_REG		0x92
+#define MHL_TX_DISC_CTRL4_REG		0x93
+#define MHL_TX_DISC_CTRL5_REG		0x94
+#define MHL_TX_DISC_CTRL6_REG		0x95
+#define MHL_TX_DISC_CTRL7_REG		0x96
+#define MHL_TX_DISC_CTRL8_REG		0x97
+#define MHL_TX_STAT2_REG		0x99
+#define MHL_TX_MHLTX_CTL1_REG		0xA0
+#define MHL_TX_MHLTX_CTL2_REG		0xA1
+#define MHL_TX_MHLTX_CTL4_REG		0xA3
+#define MHL_TX_MHLTX_CTL6_REG		0xA5
+#define MHL_TX_MHLTX_CTL7_REG		0xA6
+
+#define RSEN_STATUS			BIT(2)
+#define HPD_CHANGE_INT			BIT(6)
+#define RSEN_CHANGE_INT			BIT(5)
+#define RGND_READY_INT			BIT(6)
+#define VBUS_LOW_INT			BIT(5)
+#define CBUS_LKOUT_INT			BIT(4)
+#define MHL_DISC_FAIL_INT		BIT(3)
+#define MHL_EST_INT			BIT(2)
+#define HPD_CHANGE_INT_MASK		BIT(6)
+#define RSEN_CHANGE_INT_MASK		BIT(5)
+
+#define RGND_READY_MASK			BIT(6)
+#define CBUS_LKOUT_MASK			BIT(4)
+#define MHL_DISC_FAIL_MASK		BIT(3)
+#define MHL_EST_MASK			BIT(2)
+
+#define SKIP_GND			BIT(6)
+
+#define ATT_THRESH_SHIFT		0x04
+#define ATT_THRESH_MASK			(0x03 << ATT_THRESH_SHIFT)
+#define USB_D_OEN			BIT(3)
+#define DEGLITCH_TIME_MASK		0x07
+#define DEGLITCH_TIME_2MS		0
+#define DEGLITCH_TIME_4MS		1
+#define DEGLITCH_TIME_8MS		2
+#define DEGLITCH_TIME_16MS		3
+#define DEGLITCH_TIME_40MS		4
+#define DEGLITCH_TIME_50MS		5
+#define DEGLITCH_TIME_60MS		6
+#define DEGLITCH_TIME_128MS		7
+
+#define USB_D_OVR			BIT(7)
+#define USB_ID_OVR			BIT(6)
+#define DVRFLT_SEL			BIT(5)
+#define BLOCK_RGND_INT			BIT(4)
+#define SKIP_DEG			BIT(3)
+#define CI2CA_POL			BIT(2)
+#define CI2CA_WKUP			BIT(1)
+#define SINGLE_ATT			BIT(0)
+
+#define USB_D_ODN			BIT(5)
+#define VBUS_CHECK			BIT(2)
+#define RGND_INTP_MASK			0x03
+#define RGND_INTP_OPEN			0
+#define RGND_INTP_2K			1
+#define RGND_INTP_1K			2
+#define RGND_INTP_SHORT			3
+
+/* HDMI registers */
+#define HDMI_RX_TMDS0_CCTRL1_REG	0x10
+#define HDMI_RX_TMDS_CLK_EN_REG		0x11
+#define HDMI_RX_TMDS_CH_EN_REG		0x12
+#define HDMI_RX_PLL_CALREFSEL_REG	0x17
+#define HDMI_RX_PLL_VCOCAL_REG		0x1A
+#define HDMI_RX_EQ_DATA0_REG		0x22
+#define HDMI_RX_EQ_DATA1_REG		0x23
+#define HDMI_RX_EQ_DATA2_REG		0x24
+#define HDMI_RX_EQ_DATA3_REG		0x25
+#define HDMI_RX_EQ_DATA4_REG		0x26
+#define HDMI_RX_TMDS_ZONE_CTRL_REG	0x4C
+#define HDMI_RX_TMDS_MODE_CTRL_REG	0x4D
+
+/* CBUS registers */
+#define CBUS_INT_STATUS_1_REG		0x08
+#define CBUS_INTR1_ENABLE_REG		0x09
+#define CBUS_MSC_REQ_ABORT_REASON_REG	0x0D
+#define CBUS_INT_STATUS_2_REG		0x1E
+#define CBUS_INTR2_ENABLE_REG		0x1F
+#define CBUS_LINK_CONTROL_2_REG		0x31
+#define CBUS_MHL_STATUS_REG_0		0xB0
+#define CBUS_MHL_STATUS_REG_1		0xB1
+
+#define BIT_CBUS_RESET			BIT(3)
+#define SET_HPD_DOWNSTREAM		BIT(6)
+
+/* TPI registers */
+#define TPI_DPD_REG			0x3D
+
+/* Timeouts in msec */
+#define T_SRC_VBUS_CBUS_TO_STABLE	200
+#define T_SRC_CBUS_FLOAT		100
+#define T_SRC_CBUS_DEGLITCH		2
+#define T_SRC_RXSENSE_DEGLITCH		110
+
+#define MHL1_MAX_CLK			75000 /* in kHz */
+
+#define I2C_TPI_ADDR			0x3D
+#define I2C_HDMI_ADDR			0x49
+#define I2C_CBUS_ADDR			0x64
+
+enum sii9234_state {
+	ST_OFF,
+	ST_D3,
+	ST_RGND_INIT,
+	ST_RGND_1K,
+	ST_RSEN_HIGH,
+	ST_MHL_ESTABLISHED,
+	ST_FAILURE_DISCOVERY,
+	ST_FAILURE,
+};
+
+struct sii9234 {
+	struct i2c_client *client[4];
+	struct drm_bridge bridge;
+	struct device *dev;
+	struct gpio_desc *gpio_reset;
+	int i2c_error;
+	struct regulator_bulk_data supplies[4];
+
+	struct mutex lock; /* Protects fields below and device registers */
+	enum sii9234_state state;
+};
+
+enum sii9234_client_id {
+	I2C_MHL,
+	I2C_TPI,
+	I2C_HDMI,
+	I2C_CBUS,
+};
+
+static const char * const sii9234_client_name[] = {
+	[I2C_MHL] = "MHL",
+	[I2C_TPI] = "TPI",
+	[I2C_HDMI] = "HDMI",
+	[I2C_CBUS] = "CBUS",
+};
+
+static int sii9234_writeb(struct sii9234 *ctx, int id, int offset,
+			  int value)
+{
+	int ret;
+	struct i2c_client *client = ctx->client[id];
+
+	if (ctx->i2c_error)
+		return ctx->i2c_error;
+
+	ret = i2c_smbus_write_byte_data(client, offset, value);
+	if (ret < 0)
+		dev_err(ctx->dev, "writeb: %4s[0x%02x] <- 0x%02x\n",
+			sii9234_client_name[id], offset, value);
+	ctx->i2c_error = ret;
+
+	return ret;
+}
+
+static int sii9234_writebm(struct sii9234 *ctx, int id, int offset,
+			   int value, int mask)
+{
+	int ret;
+	struct i2c_client *client = ctx->client[id];
+
+	if (ctx->i2c_error)
+		return ctx->i2c_error;
+
+	ret = i2c_smbus_write_byte(client, offset);
+	if (ret < 0) {
+		dev_err(ctx->dev, "writebm: %4s[0x%02x] <- 0x%02x\n",
+			sii9234_client_name[id], offset, value);
+		ctx->i2c_error = ret;
+		return ret;
+	}
+
+	ret = i2c_smbus_read_byte(client);
+	if (ret < 0) {
+		dev_err(ctx->dev, "writebm: %4s[0x%02x] <- 0x%02x\n",
+			sii9234_client_name[id], offset, value);
+		ctx->i2c_error = ret;
+		return ret;
+	}
+
+	value = (value & mask) | (ret & ~mask);
+
+	ret = i2c_smbus_write_byte_data(client, offset, value);
+	if (ret < 0) {
+		dev_err(ctx->dev, "writebm: %4s[0x%02x] <- 0x%02x\n",
+			sii9234_client_name[id], offset, value);
+		ctx->i2c_error = ret;
+	}
+
+	return ret;
+}
+
+static int sii9234_readb(struct sii9234 *ctx, int id, int offset)
+{
+	int ret;
+	struct i2c_client *client = ctx->client[id];
+
+	if (ctx->i2c_error)
+		return ctx->i2c_error;
+
+	ret = i2c_smbus_write_byte(client, offset);
+	if (ret < 0) {
+		dev_err(ctx->dev, "readb: %4s[0x%02x]\n",
+			sii9234_client_name[id], offset);
+		ctx->i2c_error = ret;
+		return ret;
+	}
+
+	ret = i2c_smbus_read_byte(client);
+	if (ret < 0) {
+		dev_err(ctx->dev, "readb: %4s[0x%02x]\n",
+			sii9234_client_name[id], offset);
+		ctx->i2c_error = ret;
+	}
+
+	return ret;
+}
+
+static int sii9234_clear_error(struct sii9234 *ctx)
+{
+	int ret = ctx->i2c_error;
+
+	ctx->i2c_error = 0;
+
+	return ret;
+}
+
+#define mhl_tx_writeb(sii9234, offset, value) \
+	sii9234_writeb(sii9234, I2C_MHL, offset, value)
+#define mhl_tx_writebm(sii9234, offset, value, mask) \
+	sii9234_writebm(sii9234, I2C_MHL, offset, value, mask)
+#define mhl_tx_readb(sii9234, offset) \
+	sii9234_readb(sii9234, I2C_MHL, offset)
+#define cbus_writeb(sii9234, offset, value) \
+	sii9234_writeb(sii9234, I2C_CBUS, offset, value)
+#define cbus_writebm(sii9234, offset, value, mask) \
+	sii9234_writebm(sii9234, I2C_CBUS, offset, value, mask)
+#define cbus_readb(sii9234, offset) \
+	sii9234_readb(sii9234, I2C_CBUS, offset)
+#define hdmi_writeb(sii9234, offset, value) \
+	sii9234_writeb(sii9234, I2C_HDMI, offset, value)
+#define hdmi_writebm(sii9234, offset, value, mask) \
+	sii9234_writebm(sii9234, I2C_HDMI, offset, value, mask)
+#define hdmi_readb(sii9234, offset) \
+	sii9234_readb(sii9234, I2C_HDMI, offset)
+#define tpi_writeb(sii9234, offset, value) \
+	sii9234_writeb(sii9234, I2C_TPI, offset, value)
+#define tpi_writebm(sii9234, offset, value, mask) \
+	sii9234_writebm(sii9234, I2C_TPI, offset, value, mask)
+#define tpi_readb(sii9234, offset) \
+	sii9234_readb(sii9234, I2C_TPI, offset)
+
+static u8 sii9234_tmds_control(struct sii9234 *ctx, bool enable)
+{
+	mhl_tx_writebm(ctx, MHL_TX_TMDS_CCTRL, enable ? ~0 : 0,
+		       BIT_TMDS_CCTRL_TMDS_OE);
+	mhl_tx_writebm(ctx, MHL_TX_INT_CTRL_REG, enable ? ~0 : 0,
+		       MHL_HPD_OUT_OVR_EN | MHL_HPD_OUT_OVR_VAL);
+	return sii9234_clear_error(ctx);
+}
+
+static int sii9234_cbus_reset(struct sii9234 *ctx)
+{
+	int i;
+
+	mhl_tx_writebm(ctx, MHL_TX_SRST, ~0, BIT_CBUS_RESET);
+	msleep(T_SRC_CBUS_DEGLITCH);
+	mhl_tx_writebm(ctx, MHL_TX_SRST, 0, BIT_CBUS_RESET);
+
+	for (i = 0; i < 4; i++) {
+		/*
+		 * Enable WRITE_STAT interrupt for writes to all
+		 * 4 MSC Status registers.
+		 */
+		cbus_writeb(ctx, 0xE0 + i, 0xF2);
+		/*
+		 * Enable SET_INT interrupt for writes to all
+		 * 4 MSC Interrupt registers.
+		 */
+		cbus_writeb(ctx, 0xF0 + i, 0xF2);
+	}
+
+	return sii9234_clear_error(ctx);
+}
+
+/* Require to chek mhl imformation of samsung in cbus_init_register */
+static int sii9234_cbus_init(struct sii9234 *ctx)
+{
+	cbus_writeb(ctx, 0x07, 0xF2);
+	cbus_writeb(ctx, 0x40, 0x03);
+	cbus_writeb(ctx, 0x42, 0x06);
+	cbus_writeb(ctx, 0x36, 0x0C);
+	cbus_writeb(ctx, 0x3D, 0xFD);
+	cbus_writeb(ctx, 0x1C, 0x01);
+	cbus_writeb(ctx, 0x1D, 0x0F);
+	cbus_writeb(ctx, 0x44, 0x02);
+	/* Setup our devcap */
+	cbus_writeb(ctx, CBUS_DEVCAP_OFFSET + MHL_DCAP_DEV_STATE, 0x00);
+	cbus_writeb(ctx, CBUS_DEVCAP_OFFSET + MHL_DCAP_MHL_VERSION,
+		    SII9234_MHL_VERSION);
+	cbus_writeb(ctx, CBUS_DEVCAP_OFFSET + MHL_DCAP_CAT,
+		    MHL_DCAP_CAT_SOURCE);
+	cbus_writeb(ctx, CBUS_DEVCAP_OFFSET + MHL_DCAP_ADOPTER_ID_H, 0x01);
+	cbus_writeb(ctx, CBUS_DEVCAP_OFFSET + MHL_DCAP_ADOPTER_ID_L, 0x41);
+	cbus_writeb(ctx, CBUS_DEVCAP_OFFSET + MHL_DCAP_VID_LINK_MODE,
+		    MHL_DCAP_VID_LINK_RGB444 | MHL_DCAP_VID_LINK_YCBCR444);
+	cbus_writeb(ctx, CBUS_DEVCAP_OFFSET + MHL_DCAP_VIDEO_TYPE,
+		    MHL_DCAP_VT_GRAPHICS);
+	cbus_writeb(ctx, CBUS_DEVCAP_OFFSET + MHL_DCAP_LOG_DEV_MAP,
+		    MHL_DCAP_LD_GUI);
+	cbus_writeb(ctx, CBUS_DEVCAP_OFFSET + MHL_DCAP_BANDWIDTH, 0x0F);
+	cbus_writeb(ctx, CBUS_DEVCAP_OFFSET + MHL_DCAP_FEATURE_FLAG,
+		    MHL_DCAP_FEATURE_RCP_SUPPORT | MHL_DCAP_FEATURE_RAP_SUPPORT
+			| MHL_DCAP_FEATURE_SP_SUPPORT);
+	cbus_writeb(ctx, CBUS_DEVCAP_OFFSET + MHL_DCAP_DEVICE_ID_H, 0x0);
+	cbus_writeb(ctx, CBUS_DEVCAP_OFFSET + MHL_DCAP_DEVICE_ID_L, 0x0);
+	cbus_writeb(ctx, CBUS_DEVCAP_OFFSET + MHL_DCAP_SCRATCHPAD_SIZE,
+		    SII9234_SCRATCHPAD_SIZE);
+	cbus_writeb(ctx, CBUS_DEVCAP_OFFSET + MHL_DCAP_INT_STAT_SIZE,
+		    SII9234_INT_STAT_SIZE);
+	cbus_writeb(ctx, CBUS_DEVCAP_OFFSET + MHL_DCAP_RESERVED, 0);
+	cbus_writebm(ctx, 0x31, 0x0C, 0x0C);
+	cbus_writeb(ctx, 0x30, 0x01);
+	cbus_writebm(ctx, 0x3C, 0x30, 0x38);
+	cbus_writebm(ctx, 0x22, 0x0D, 0x0F);
+	cbus_writebm(ctx, 0x2E, 0x15, 0x15);
+	cbus_writeb(ctx, CBUS_INTR1_ENABLE_REG, 0);
+	cbus_writeb(ctx, CBUS_INTR2_ENABLE_REG, 0);
+
+	return sii9234_clear_error(ctx);
+}
+
+static void force_usb_id_switch_open(struct sii9234 *ctx)
+{
+	/* Disable CBUS discovery */
+	mhl_tx_writebm(ctx, MHL_TX_DISC_CTRL1_REG, 0, 0x01);
+	/* Force USB ID switch to open */
+	mhl_tx_writebm(ctx, MHL_TX_DISC_CTRL6_REG, ~0, USB_ID_OVR);
+	mhl_tx_writebm(ctx, MHL_TX_DISC_CTRL3_REG, ~0, 0x86);
+	/* Force upstream HPD to 0 when not in MHL mode. */
+	mhl_tx_writebm(ctx, MHL_TX_INT_CTRL_REG, 0, 0x30);
+}
+
+static void release_usb_id_switch_open(struct sii9234 *ctx)
+{
+	msleep(T_SRC_CBUS_FLOAT);
+	/* Clear USB ID switch to open */
+	mhl_tx_writebm(ctx, MHL_TX_DISC_CTRL6_REG, 0, USB_ID_OVR);
+	/* Enable CBUS discovery */
+	mhl_tx_writebm(ctx, MHL_TX_DISC_CTRL1_REG, ~0, 0x01);
+}
+
+static int sii9234_power_init(struct sii9234 *ctx)
+{
+	/* Force the SiI9234 into the D0 state. */
+	tpi_writeb(ctx, TPI_DPD_REG, 0x3F);
+	/* Enable TxPLL Clock */
+	hdmi_writeb(ctx, HDMI_RX_TMDS_CLK_EN_REG, 0x01);
+	/* Enable Tx Clock Path & Equalizer */
+	hdmi_writeb(ctx, HDMI_RX_TMDS_CH_EN_REG, 0x15);
+	/* Power Up TMDS */
+	mhl_tx_writeb(ctx, 0x08, 0x35);
+	return sii9234_clear_error(ctx);
+}
+
+static int sii9234_hdmi_init(struct sii9234 *ctx)
+{
+	hdmi_writeb(ctx, HDMI_RX_TMDS0_CCTRL1_REG, 0xC1);
+	hdmi_writeb(ctx, HDMI_RX_PLL_CALREFSEL_REG, 0x03);
+	hdmi_writeb(ctx, HDMI_RX_PLL_VCOCAL_REG, 0x20);
+	hdmi_writeb(ctx, HDMI_RX_EQ_DATA0_REG, 0x8A);
+	hdmi_writeb(ctx, HDMI_RX_EQ_DATA1_REG, 0x6A);
+	hdmi_writeb(ctx, HDMI_RX_EQ_DATA2_REG, 0xAA);
+	hdmi_writeb(ctx, HDMI_RX_EQ_DATA3_REG, 0xCA);
+	hdmi_writeb(ctx, HDMI_RX_EQ_DATA4_REG, 0xEA);
+	hdmi_writeb(ctx, HDMI_RX_TMDS_ZONE_CTRL_REG, 0xA0);
+	hdmi_writeb(ctx, HDMI_RX_TMDS_MODE_CTRL_REG, 0x00);
+	mhl_tx_writeb(ctx, MHL_TX_TMDS_CCTRL, 0x34);
+	hdmi_writeb(ctx, 0x45, 0x44);
+	hdmi_writeb(ctx, 0x31, 0x0A);
+	hdmi_writeb(ctx, HDMI_RX_TMDS0_CCTRL1_REG, 0xC1);
+
+	return sii9234_clear_error(ctx);
+}
+
+static int sii9234_mhl_tx_ctl_int(struct sii9234 *ctx)
+{
+	mhl_tx_writeb(ctx, MHL_TX_MHLTX_CTL1_REG, 0xD0);
+	mhl_tx_writeb(ctx, MHL_TX_MHLTX_CTL2_REG, 0xFC);
+	mhl_tx_writeb(ctx, MHL_TX_MHLTX_CTL4_REG, 0xEB);
+	mhl_tx_writeb(ctx, MHL_TX_MHLTX_CTL7_REG, 0x0C);
+
+	return sii9234_clear_error(ctx);
+}
+
+static int sii9234_reset(struct sii9234 *ctx)
+{
+	int ret;
+
+	sii9234_clear_error(ctx);
+
+	ret = sii9234_power_init(ctx);
+	if (ret < 0)
+		return ret;
+	ret = sii9234_cbus_reset(ctx);
+	if (ret < 0)
+		return ret;
+	ret = sii9234_hdmi_init(ctx);
+	if (ret < 0)
+		return ret;
+	ret = sii9234_mhl_tx_ctl_int(ctx);
+	if (ret < 0)
+		return ret;
+
+	/* Enable HDCP Compliance safety */
+	mhl_tx_writeb(ctx, 0x2B, 0x01);
+	/* CBUS discovery cycle time for each drive and float = 150us */
+	mhl_tx_writebm(ctx, MHL_TX_DISC_CTRL1_REG, 0x04, 0x06);
+	/* Clear bit 6 (reg_skip_rgnd) */
+	mhl_tx_writeb(ctx, MHL_TX_DISC_CTRL2_REG, (1 << 7) /* Reserved */
+		      | 2 << ATT_THRESH_SHIFT | DEGLITCH_TIME_50MS);
+	/*
+	 * Changed from 66 to 65 for 94[1:0] = 01 = 5k reg_cbusmhl_pup_sel
+	 * 1.8V CBUS VTH & GND threshold
+	 * to meet CTS 3.3.7.2 spec
+	 */
+	mhl_tx_writeb(ctx, MHL_TX_DISC_CTRL5_REG, 0x77);
+	cbus_writebm(ctx, CBUS_LINK_CONTROL_2_REG, ~0, MHL_INIT_TIMEOUT);
+	mhl_tx_writeb(ctx, MHL_TX_MHLTX_CTL6_REG, 0xA0);
+	/* RGND & single discovery attempt (RGND blocking) */
+	mhl_tx_writeb(ctx, MHL_TX_DISC_CTRL6_REG, BLOCK_RGND_INT |
+		      DVRFLT_SEL | SINGLE_ATT);
+	/* Use VBUS path of discovery state machine */
+	mhl_tx_writeb(ctx, MHL_TX_DISC_CTRL8_REG, 0);
+	/* 0x92[3] sets the CBUS / ID switch */
+	mhl_tx_writebm(ctx, MHL_TX_DISC_CTRL6_REG, ~0, USB_ID_OVR);
+	/*
+	 * To allow RGND engine to operate correctly.
+	 * When moving the chip from D2 to D0 (power up, init regs)
+	 * the values should be
+	 * 94[1:0] = 01  reg_cbusmhl_pup_sel[1:0] should be set for 5k
+	 * 93[7:6] = 10  reg_cbusdisc_pup_sel[1:0] should be
+	 * set for 10k (default)
+	 * 93[5:4] = 00  reg_cbusidle_pup_sel[1:0] = open (default)
+	 */
+	mhl_tx_writebm(ctx, MHL_TX_DISC_CTRL3_REG, ~0, 0x86);
+	/*
+	 * Change from CC to 8C to match 5K
+	 * to meet CTS 3.3.72 spec
+	 */
+	mhl_tx_writebm(ctx, MHL_TX_DISC_CTRL4_REG, ~0, 0x8C);
+	/* Configure the interrupt as active high */
+	mhl_tx_writebm(ctx, MHL_TX_INT_CTRL_REG, 0, 0x06);
+
+	msleep(25);
+
+	/* Release usb_id switch */
+	mhl_tx_writebm(ctx, MHL_TX_DISC_CTRL6_REG, 0,  USB_ID_OVR);
+	mhl_tx_writeb(ctx, MHL_TX_DISC_CTRL1_REG, 0x27);
+
+	ret = sii9234_clear_error(ctx);
+	if (ret < 0)
+		return ret;
+	ret = sii9234_cbus_init(ctx);
+	if (ret < 0)
+		return ret;
+
+	/* Enable Auto soft reset on SCDT = 0 */
+	mhl_tx_writeb(ctx, 0x05, 0x04);
+	/* HDMI Transcode mode enable */
+	mhl_tx_writeb(ctx, 0x0D, 0x1C);
+	mhl_tx_writeb(ctx, MHL_TX_INTR4_ENABLE_REG,
+		      RGND_READY_MASK | CBUS_LKOUT_MASK
+			| MHL_DISC_FAIL_MASK | MHL_EST_MASK);
+	mhl_tx_writeb(ctx, MHL_TX_INTR1_ENABLE_REG, 0x60);
+
+	/* This point is very important before measure RGND impedance */
+	force_usb_id_switch_open(ctx);
+	mhl_tx_writebm(ctx, MHL_TX_DISC_CTRL4_REG, 0, 0xF0);
+	mhl_tx_writebm(ctx, MHL_TX_DISC_CTRL5_REG, 0, 0x03);
+	release_usb_id_switch_open(ctx);
+
+	/* Force upstream HPD to 0 when not in MHL mode */
+	mhl_tx_writebm(ctx, MHL_TX_INT_CTRL_REG, 0, 1 << 5);
+	mhl_tx_writebm(ctx, MHL_TX_INT_CTRL_REG, ~0, 1 << 4);
+
+	return sii9234_clear_error(ctx);
+}
+
+static int sii9234_goto_d3(struct sii9234 *ctx)
+{
+	int ret;
+
+	dev_dbg(ctx->dev, "sii9234: detection started d3\n");
+
+	ret = sii9234_reset(ctx);
+	if (ret < 0)
+		goto exit;
+
+	hdmi_writeb(ctx, 0x01, 0x03);
+	tpi_writebm(ctx, TPI_DPD_REG, 0, 1);
+	/* I2C above is expected to fail because power goes down */
+	sii9234_clear_error(ctx);
+
+	ctx->state = ST_D3;
+
+	return 0;
+ exit:
+	dev_err(ctx->dev, "%s failed\n", __func__);
+	return -1;
+}
+
+static int sii9234_hw_on(struct sii9234 *ctx)
+{
+	return regulator_bulk_enable(ARRAY_SIZE(ctx->supplies), ctx->supplies);
+}
+
+static void sii9234_hw_off(struct sii9234 *ctx)
+{
+	gpiod_set_value(ctx->gpio_reset, 1);
+	msleep(20);
+	regulator_bulk_disable(ARRAY_SIZE(ctx->supplies), ctx->supplies);
+}
+
+static void sii9234_hw_reset(struct sii9234 *ctx)
+{
+	gpiod_set_value(ctx->gpio_reset, 1);
+	msleep(20);
+	gpiod_set_value(ctx->gpio_reset, 0);
+}
+
+static void sii9234_cable_in(struct sii9234 *ctx)
+{
+	int ret;
+
+	mutex_lock(&ctx->lock);
+	if (ctx->state != ST_OFF)
+		goto unlock;
+	ret = sii9234_hw_on(ctx);
+	if (ret < 0)
+		goto unlock;
+
+	sii9234_hw_reset(ctx);
+	sii9234_goto_d3(ctx);
+	/* To avoid irq storm, when hw is in meta state */
+	enable_irq(to_i2c_client(ctx->dev)->irq);
+
+unlock:
+	mutex_unlock(&ctx->lock);
+}
+
+static void sii9234_cable_out(struct sii9234 *ctx)
+{
+	mutex_lock(&ctx->lock);
+
+	if (ctx->state == ST_OFF)
+		goto unlock;
+
+	disable_irq(to_i2c_client(ctx->dev)->irq);
+	tpi_writeb(ctx, TPI_DPD_REG, 0);
+	/* Turn on&off hpd festure for only QCT HDMI */
+	sii9234_hw_off(ctx);
+
+	ctx->state = ST_OFF;
+
+unlock:
+	mutex_unlock(&ctx->lock);
+}
+
+static enum sii9234_state sii9234_rgnd_ready_irq(struct sii9234 *ctx)
+{
+	int value;
+
+	if (ctx->state == ST_D3) {
+		int ret;
+
+		dev_dbg(ctx->dev, "RGND_READY_INT\n");
+		sii9234_hw_reset(ctx);
+
+		ret = sii9234_reset(ctx);
+		if (ret < 0) {
+			dev_err(ctx->dev, "sii9234_reset() failed\n");
+			return ST_FAILURE;
+		}
+
+		return ST_RGND_INIT;
+	}
+
+	/* Got interrupt in inappropriate state */
+	if (ctx->state != ST_RGND_INIT)
+		return ST_FAILURE;
+
+	value = mhl_tx_readb(ctx, MHL_TX_STAT2_REG);
+	if (sii9234_clear_error(ctx))
+		return ST_FAILURE;
+
+	if ((value & RGND_INTP_MASK) != RGND_INTP_1K) {
+		dev_warn(ctx->dev, "RGND is not 1k\n");
+		return ST_RGND_INIT;
+	}
+	dev_dbg(ctx->dev, "RGND 1K!!\n");
+	mhl_tx_writebm(ctx, MHL_TX_DISC_CTRL4_REG, ~0, 0x8C);
+	mhl_tx_writeb(ctx, MHL_TX_DISC_CTRL5_REG, 0x77);
+	mhl_tx_writebm(ctx, MHL_TX_DISC_CTRL6_REG, ~0, 0x05);
+	if (sii9234_clear_error(ctx))
+		return ST_FAILURE;
+
+	msleep(T_SRC_VBUS_CBUS_TO_STABLE);
+	return ST_RGND_1K;
+}
+
+static enum sii9234_state sii9234_mhl_established(struct sii9234 *ctx)
+{
+	dev_dbg(ctx->dev, "mhl est interrupt\n");
+
+	/* Discovery override */
+	mhl_tx_writeb(ctx, MHL_TX_MHLTX_CTL1_REG, 0x10);
+	/* Increase DDC translation layer timer (byte mode) */
+	cbus_writeb(ctx, 0x07, 0x32);
+	cbus_writebm(ctx, 0x44, ~0, 1 << 1);
+	/* Keep the discovery enabled. Need RGND interrupt */
+	mhl_tx_writebm(ctx, MHL_TX_DISC_CTRL1_REG, ~0, 1);
+	mhl_tx_writeb(ctx, MHL_TX_INTR1_ENABLE_REG,
+		      RSEN_CHANGE_INT_MASK | HPD_CHANGE_INT_MASK);
+
+	if (sii9234_clear_error(ctx))
+		return ST_FAILURE;
+
+	return ST_MHL_ESTABLISHED;
+}
+
+static enum sii9234_state sii9234_hpd_change(struct sii9234 *ctx)
+{
+	int value;
+
+	value = cbus_readb(ctx, CBUS_MSC_REQ_ABORT_REASON_REG);
+	if (sii9234_clear_error(ctx))
+		return ST_FAILURE;
+
+	if (value & SET_HPD_DOWNSTREAM) {
+		/* Downstream HPD High, Enable TMDS */
+		sii9234_tmds_control(ctx, true);
+	} else {
+		/* Downstream HPD Low, Disable TMDS */
+		sii9234_tmds_control(ctx, false);
+	}
+
+	return ctx->state;
+}
+
+static enum sii9234_state sii9234_rsen_change(struct sii9234 *ctx)
+{
+	int value;
+
+	/* Work_around code to handle wrong interrupt */
+	if (ctx->state != ST_RGND_1K) {
+		dev_err(ctx->dev, "RSEN_HIGH without RGND_1K\n");
+		return ST_FAILURE;
+	}
+	value = mhl_tx_readb(ctx, MHL_TX_SYSSTAT_REG);
+	if (value < 0)
+		return ST_FAILURE;
+
+	if (value & RSEN_STATUS) {
+		dev_dbg(ctx->dev, "MHL cable connected.. RSEN High\n");
+		return ST_RSEN_HIGH;
+	}
+	dev_dbg(ctx->dev, "RSEN lost\n");
+	/*
+	 * Once RSEN loss is confirmed,we need to check
+	 * based on cable status and chip power status,whether
+	 * it is SINK Loss(HDMI cable not connected, TV Off)
+	 * or MHL cable disconnection
+	 * TODO: Define the below mhl_disconnection()
+	 */
+	msleep(T_SRC_RXSENSE_DEGLITCH);
+	value = mhl_tx_readb(ctx, MHL_TX_SYSSTAT_REG);
+	if (value < 0)
+		return ST_FAILURE;
+	dev_dbg(ctx->dev, "sys_stat: %x\n", value);
+
+	if (value & RSEN_STATUS) {
+		dev_dbg(ctx->dev, "RSEN recovery\n");
+		return ST_RSEN_HIGH;
+	}
+	dev_dbg(ctx->dev, "RSEN Really LOW\n");
+	/* To meet CTS 3.3.22.2 spec */
+	sii9234_tmds_control(ctx, false);
+	force_usb_id_switch_open(ctx);
+	release_usb_id_switch_open(ctx);
+
+	return ST_FAILURE;
+}
+
+static irqreturn_t sii9234_irq_thread(int irq, void *data)
+{
+	struct sii9234 *ctx = data;
+	int intr1, intr4;
+	int intr1_en, intr4_en;
+	int cbus_intr1, cbus_intr2;
+
+	dev_dbg(ctx->dev, "%s\n", __func__);
+
+	mutex_lock(&ctx->lock);
+
+	intr1 = mhl_tx_readb(ctx, MHL_TX_INTR1_REG);
+	intr4 = mhl_tx_readb(ctx, MHL_TX_INTR4_REG);
+	intr1_en = mhl_tx_readb(ctx, MHL_TX_INTR1_ENABLE_REG);
+	intr4_en = mhl_tx_readb(ctx, MHL_TX_INTR4_ENABLE_REG);
+	cbus_intr1 = cbus_readb(ctx, CBUS_INT_STATUS_1_REG);
+	cbus_intr2 = cbus_readb(ctx, CBUS_INT_STATUS_2_REG);
+
+	if (sii9234_clear_error(ctx))
+		goto done;
+
+	dev_dbg(ctx->dev, "irq %02x/%02x %02x/%02x %02x/%02x\n",
+		intr1, intr1_en, intr4, intr4_en, cbus_intr1, cbus_intr2);
+
+	if (intr4 & RGND_READY_INT)
+		ctx->state = sii9234_rgnd_ready_irq(ctx);
+	if (intr1 & RSEN_CHANGE_INT)
+		ctx->state = sii9234_rsen_change(ctx);
+	if (intr4 & MHL_EST_INT)
+		ctx->state = sii9234_mhl_established(ctx);
+	if (intr1 & HPD_CHANGE_INT)
+		ctx->state = sii9234_hpd_change(ctx);
+	if (intr4 & CBUS_LKOUT_INT)
+		ctx->state = ST_FAILURE;
+	if (intr4 & MHL_DISC_FAIL_INT)
+		ctx->state = ST_FAILURE_DISCOVERY;
+
+ done:
+	/* Clean interrupt status and pending flags */
+	mhl_tx_writeb(ctx, MHL_TX_INTR1_REG, intr1);
+	mhl_tx_writeb(ctx, MHL_TX_INTR4_REG, intr4);
+	cbus_writeb(ctx, CBUS_MHL_STATUS_REG_0, 0xFF);
+	cbus_writeb(ctx, CBUS_MHL_STATUS_REG_1, 0xFF);
+	cbus_writeb(ctx, CBUS_INT_STATUS_1_REG, cbus_intr1);
+	cbus_writeb(ctx, CBUS_INT_STATUS_2_REG, cbus_intr2);
+
+	sii9234_clear_error(ctx);
+
+	if (ctx->state == ST_FAILURE) {
+		dev_dbg(ctx->dev, "try to reset after failure\n");
+		sii9234_hw_reset(ctx);
+		sii9234_goto_d3(ctx);
+	}
+
+	if (ctx->state == ST_FAILURE_DISCOVERY) {
+		dev_err(ctx->dev, "discovery failed, no power for MHL?\n");
+		tpi_writebm(ctx, TPI_DPD_REG, 0, 1);
+		ctx->state = ST_D3;
+	}
+
+	mutex_unlock(&ctx->lock);
+
+	return IRQ_HANDLED;
+}
+
+static int sii9234_init_resources(struct sii9234 *ctx,
+				  struct i2c_client *client)
+{
+	struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent);
+	int ret;
+
+	if (!ctx->dev->of_node) {
+		dev_err(ctx->dev, "not DT device\n");
+		return -ENODEV;
+	}
+
+	ctx->gpio_reset = devm_gpiod_get(ctx->dev, "reset", GPIOD_OUT_LOW);
+	if (IS_ERR(ctx->gpio_reset)) {
+		dev_err(ctx->dev, "failed to get reset gpio from DT\n");
+		return PTR_ERR(ctx->gpio_reset);
+	}
+
+	ctx->supplies[0].supply = "avcc12";
+	ctx->supplies[1].supply = "avcc33";
+	ctx->supplies[2].supply = "iovcc18";
+	ctx->supplies[3].supply = "cvcc12";
+	ret = devm_regulator_bulk_get(ctx->dev, 4, ctx->supplies);
+	if (ret) {
+		dev_err(ctx->dev, "regulator_bulk failed\n");
+		return ret;
+	}
+
+	ctx->client[I2C_MHL] = client;
+
+	ctx->client[I2C_TPI] = i2c_new_dummy(adapter, I2C_TPI_ADDR);
+	if (!ctx->client[I2C_TPI]) {
+		dev_err(ctx->dev, "failed to create TPI client\n");
+		return -ENODEV;
+	}
+
+	ctx->client[I2C_HDMI] = i2c_new_dummy(adapter, I2C_HDMI_ADDR);
+	if (!ctx->client[I2C_HDMI]) {
+		dev_err(ctx->dev, "failed to create HDMI RX client\n");
+		goto fail_tpi;
+	}
+
+	ctx->client[I2C_CBUS] = i2c_new_dummy(adapter, I2C_CBUS_ADDR);
+	if (!ctx->client[I2C_CBUS]) {
+		dev_err(ctx->dev, "failed to create CBUS client\n");
+		goto fail_hdmi;
+	}
+
+	return 0;
+
+fail_hdmi:
+	i2c_unregister_device(ctx->client[I2C_HDMI]);
+fail_tpi:
+	i2c_unregister_device(ctx->client[I2C_TPI]);
+
+	return -ENODEV;
+}
+
+static void sii9234_deinit_resources(struct sii9234 *ctx)
+{
+	i2c_unregister_device(ctx->client[I2C_CBUS]);
+	i2c_unregister_device(ctx->client[I2C_HDMI]);
+	i2c_unregister_device(ctx->client[I2C_TPI]);
+}
+
+static inline struct sii9234 *bridge_to_sii9234(struct drm_bridge *bridge)
+{
+	return container_of(bridge, struct sii9234, bridge);
+}
+
+static enum drm_mode_status sii9234_mode_valid(struct drm_bridge *bridge,
+					 const struct drm_display_mode *mode)
+{
+	if (mode->clock > MHL1_MAX_CLK)
+		return MODE_CLOCK_HIGH;
+
+	return MODE_OK;
+}
+
+static const struct drm_bridge_funcs sii9234_bridge_funcs = {
+	.mode_valid = sii9234_mode_valid,
+};
+
+static int sii9234_probe(struct i2c_client *client,
+			 const struct i2c_device_id *id)
+{
+	struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent);
+	struct sii9234 *ctx;
+	struct device *dev = &client->dev;
+	int ret;
+
+	ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
+	if (!ctx)
+		return -ENOMEM;
+
+	ctx->dev = dev;
+	mutex_init(&ctx->lock);
+
+	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
+		dev_err(dev, "I2C adapter lacks SMBUS feature\n");
+		return -EIO;
+	}
+
+	if (!client->irq) {
+		dev_err(dev, "no irq provided\n");
+		return -EINVAL;
+	}
+
+	irq_set_status_flags(client->irq, IRQ_NOAUTOEN);
+	ret = devm_request_threaded_irq(dev, client->irq, NULL,
+					sii9234_irq_thread,
+					IRQF_TRIGGER_HIGH | IRQF_ONESHOT,
+					"sii9234", ctx);
+	if (ret < 0) {
+		dev_err(dev, "failed to install IRQ handler\n");
+		return ret;
+	}
+
+	ret = sii9234_init_resources(ctx, client);
+	if (ret < 0)
+		return ret;
+
+	i2c_set_clientdata(client, ctx);
+
+	ctx->bridge.funcs = &sii9234_bridge_funcs;
+	ctx->bridge.of_node = dev->of_node;
+	drm_bridge_add(&ctx->bridge);
+
+	sii9234_cable_in(ctx);
+
+	return 0;
+}
+
+static int sii9234_remove(struct i2c_client *client)
+{
+	struct sii9234 *ctx = i2c_get_clientdata(client);
+
+	sii9234_cable_out(ctx);
+	drm_bridge_remove(&ctx->bridge);
+	sii9234_deinit_resources(ctx);
+
+	return 0;
+}
+
+static const struct of_device_id sii9234_dt_match[] = {
+	{ .compatible = "sil,sii9234" },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, sii9234_dt_match);
+
+static const struct i2c_device_id sii9234_id[] = {
+	{ "SII9234", 0 },
+	{ },
+};
+MODULE_DEVICE_TABLE(i2c, sii9234_id);
+
+static struct i2c_driver sii9234_driver = {
+	.driver = {
+		.name	= "sii9234",
+		.of_match_table = sii9234_dt_match,
+	},
+	.probe = sii9234_probe,
+	.remove = sii9234_remove,
+	.id_table = sii9234_id,
+};
+
+module_i2c_driver(sii9234_driver);
+MODULE_LICENSE("GPL");

drivers/gpu/drm/bridge/sil-sii8620.c

@@ -28,6 +28,8 @@
 #include <linux/regulator/consumer.h>
 #include <linux/slab.h>
 
+#include <media/rc-core.h>
+
 #include "sil-sii8620.h"
 
 #define SII8620_BURST_BUF_LEN 288
@@ -58,6 +60,7 @@ enum sii8620_mt_state {
 struct sii8620 {
 	struct drm_bridge bridge;
 	struct device *dev;
+	struct rc_dev *rc_dev;
 	struct clk *clk_xtal;
 	struct gpio_desc *gpio_reset;
 	struct gpio_desc *gpio_int;
@@ -431,6 +434,16 @@ static void sii8620_mt_rap(struct sii8620 *ctx, u8 code)
 	sii8620_mt_msc_msg(ctx, MHL_MSC_MSG_RAP, code);
 }
 
+static void sii8620_mt_rcpk(struct sii8620 *ctx, u8 code)
+{
+	sii8620_mt_msc_msg(ctx, MHL_MSC_MSG_RCPK, code);
+}
+
+static void sii8620_mt_rcpe(struct sii8620 *ctx, u8 code)
+{
+	sii8620_mt_msc_msg(ctx, MHL_MSC_MSG_RCPE, code);
+}
+
 static void sii8620_mt_read_devcap_send(struct sii8620 *ctx,
 					struct sii8620_mt_msg *msg)
 {
@@ -1753,6 +1766,25 @@ static void sii8620_send_features(struct sii8620 *ctx)
 	sii8620_write_buf(ctx, REG_MDT_XMIT_WRITE_PORT, buf, ARRAY_SIZE(buf));
 }
 
+static bool sii8620_rcp_consume(struct sii8620 *ctx, u8 scancode)
+{
+	bool pressed = !(scancode & MHL_RCP_KEY_RELEASED_MASK);
+
+	scancode &= MHL_RCP_KEY_ID_MASK;
+
+	if (!ctx->rc_dev) {
+		dev_dbg(ctx->dev, "RCP input device not initialized\n");
+		return false;
+	}
+
+	if (pressed)
+		rc_keydown(ctx->rc_dev, RC_PROTO_CEC, scancode, 0);
+	else
+		rc_keyup(ctx->rc_dev);
+
+	return true;
+}
+
 static void sii8620_msc_mr_set_int(struct sii8620 *ctx)
 {
 	u8 ints[MHL_INT_SIZE];
@@ -1804,19 +1836,25 @@ static void sii8620_msc_mt_done(struct sii8620 *ctx)
 
 static void sii8620_msc_mr_msc_msg(struct sii8620 *ctx)
 {
-	struct sii8620_mt_msg *msg = sii8620_msc_msg_first(ctx);
+	struct sii8620_mt_msg *msg;
 	u8 buf[2];
 
-	if (!msg)
-		return;
-
 	sii8620_read_buf(ctx, REG_MSC_MR_MSC_MSG_RCVD_1ST_DATA, buf, 2);
 
 	switch (buf[0]) {
 	case MHL_MSC_MSG_RAPK:
+		msg = sii8620_msc_msg_first(ctx);
+		if (!msg)
+			return;
 		msg->ret = buf[1];
 		ctx->mt_state = MT_STATE_DONE;
 		break;
+	case MHL_MSC_MSG_RCP:
+		if (!sii8620_rcp_consume(ctx, buf[1]))
+			sii8620_mt_rcpe(ctx,
+					MHL_RCPE_STATUS_INEFFECTIVE_KEY_CODE);
+		sii8620_mt_rcpk(ctx, buf[1]);
+		break;
 	default:
 		dev_err(ctx->dev, "%s message type %d,%d not supported",
 			__func__, buf[0], buf[1]);
@@ -2102,11 +2140,57 @@ static void sii8620_cable_in(struct sii8620 *ctx)
 	enable_irq(to_i2c_client(ctx->dev)->irq);
 }
 
+static void sii8620_init_rcp_input_dev(struct sii8620 *ctx)
+{
+	struct rc_dev *rc_dev;
+	int ret;
+
+	rc_dev = rc_allocate_device(RC_DRIVER_SCANCODE);
+	if (!rc_dev) {
+		dev_err(ctx->dev, "Failed to allocate RC device\n");
+		ctx->error = -ENOMEM;
+		return;
+	}
+
+	rc_dev->input_phys = "sii8620/input0";
+	rc_dev->input_id.bustype = BUS_VIRTUAL;
+	rc_dev->map_name = RC_MAP_CEC;
+	rc_dev->allowed_protocols = RC_PROTO_BIT_CEC;
+	rc_dev->driver_name = "sii8620";
+	rc_dev->device_name = "sii8620";
+
+	ret = rc_register_device(rc_dev);
+
+	if (ret) {
+		dev_err(ctx->dev, "Failed to register RC device\n");
+		ctx->error = ret;
+		rc_free_device(ctx->rc_dev);
+		return;
+	}
+	ctx->rc_dev = rc_dev;
+}
+
 static inline struct sii8620 *bridge_to_sii8620(struct drm_bridge *bridge)
 {
 	return container_of(bridge, struct sii8620, bridge);
 }
 
+static int sii8620_attach(struct drm_bridge *bridge)
+{
+	struct sii8620 *ctx = bridge_to_sii8620(bridge);
+
+	sii8620_init_rcp_input_dev(ctx);
+
+	return sii8620_clear_error(ctx);
+}
+
+static void sii8620_detach(struct drm_bridge *bridge)
+{
+	struct sii8620 *ctx = bridge_to_sii8620(bridge);
+
+	rc_unregister_device(ctx->rc_dev);
+}
+
 static bool sii8620_mode_fixup(struct drm_bridge *bridge,
 			       const struct drm_display_mode *mode,
 			       struct drm_display_mode *adjusted_mode)
@@ -2151,6 +2235,8 @@ end:
 }
 
 static const struct drm_bridge_funcs sii8620_bridge_funcs = {
+	.attach = sii8620_attach,
+	.detach = sii8620_detach,
 	.mode_fixup = sii8620_mode_fixup,
 };
 
@@ -2217,8 +2303,8 @@ static int sii8620_remove(struct i2c_client *client)
 	struct sii8620 *ctx = i2c_get_clientdata(client);
 
 	disable_irq(to_i2c_client(ctx->dev)->irq);
-	drm_bridge_remove(&ctx->bridge);
 	sii8620_hw_off(ctx);
+	drm_bridge_remove(&ctx->bridge);
 
 	return 0;
 }

drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c

@@ -221,7 +221,6 @@ struct dw_mipi_dsi {
 	struct drm_bridge bridge;
 	struct mipi_dsi_host dsi_host;
 	struct drm_bridge *panel_bridge;
-	bool is_panel_bridge;
 	struct device *dev;
 	void __iomem *base;
 
@@ -297,7 +296,6 @@ static int dw_mipi_dsi_host_attach(struct mipi_dsi_host *host,
 		bridge = drm_panel_bridge_add(panel, DRM_MODE_CONNECTOR_DSI);
 		if (IS_ERR(bridge))
 			return PTR_ERR(bridge);
-		dsi->is_panel_bridge = true;
 	}
 
 	dsi->panel_bridge = bridge;
@@ -312,8 +310,7 @@ static int dw_mipi_dsi_host_detach(struct mipi_dsi_host *host,
 {
 	struct dw_mipi_dsi *dsi = host_to_dsi(host);
 
-	if (dsi->is_panel_bridge)
-		drm_panel_bridge_remove(dsi->panel_bridge);
+	drm_of_panel_bridge_remove(host->dev->of_node, 1, 0);
 
 	drm_bridge_remove(&dsi->bridge);
 

drivers/gpu/drm/drm_atomic.c

@@ -182,9 +182,6 @@ void drm_atomic_state_default_clear(struct drm_atomic_state *state)
 	for (i = 0; i < state->num_private_objs; i++) {
 		struct drm_private_obj *obj = state->private_objs[i].ptr;
 
-		if (!obj)
-			continue;
-
 		obj->funcs->atomic_destroy_state(obj,
 						 state->private_objs[i].state);
 		state->private_objs[i].ptr = NULL;

drivers/gpu/drm/drm_atomic_helper.c

@@ -3052,6 +3052,7 @@ out:
 		drm_modeset_backoff(&ctx);
 	}
 
+	drm_atomic_state_put(state);
 	drm_modeset_drop_locks(&ctx);
 	drm_modeset_acquire_fini(&ctx);
 

drivers/gpu/drm/drm_dp_helper.c

@@ -137,8 +137,10 @@ EXPORT_SYMBOL(drm_dp_link_train_channel_eq_delay);
 u8 drm_dp_link_rate_to_bw_code(int link_rate)
 {
 	switch (link_rate) {
-	case 162000:
 	default:
+		WARN(1, "unknown DP link rate %d, using %x\n", link_rate,
+		     DP_LINK_BW_1_62);
+	case 162000:
 		return DP_LINK_BW_1_62;
 	case 270000:
 		return DP_LINK_BW_2_7;
@@ -151,8 +153,9 @@ EXPORT_SYMBOL(drm_dp_link_rate_to_bw_code);
 int drm_dp_bw_code_to_link_rate(u8 link_bw)
 {
 	switch (link_bw) {
-	case DP_LINK_BW_1_62:
 	default:
+		WARN(1, "unknown DP link BW code %x, using 162000\n", link_bw);
+	case DP_LINK_BW_1_62:
 		return 162000;
 	case DP_LINK_BW_2_7:
 		return 270000;

drivers/gpu/drm/drm_gem_framebuffer_helper.c

@@ -27,19 +27,24 @@
  * DOC: overview
  *
  * This library provides helpers for drivers that don't subclass
- * &drm_framebuffer and and use &drm_gem_object for their backing storage.
+ * &drm_framebuffer and use &drm_gem_object for their backing storage.
  *
  * Drivers without additional needs to validate framebuffers can simply use
- * drm_gem_fb_create() and everything is wired up automatically. But all
- * parts can be used individually.
+ * drm_gem_fb_create() and everything is wired up automatically. Other drivers
+ * can use all parts independently.
  */
 
 /**
- * drm_gem_fb_get_obj() - Get GEM object for framebuffer
- * @fb: The framebuffer
- * @plane: Which plane
+ * drm_gem_fb_get_obj() - Get GEM object backing the framebuffer
+ * @fb: Framebuffer
+ * @plane: Plane index
  *
- * Returns the GEM object for given framebuffer.
+ * No additional reference is taken beyond the one that the &drm_frambuffer
+ * already holds.
+ *
+ * Returns:
+ * Pointer to &drm_gem_object for the given framebuffer and plane index or NULL
+ * if it does not exist.
  */
 struct drm_gem_object *drm_gem_fb_get_obj(struct drm_framebuffer *fb,
 					  unsigned int plane)
@@ -82,7 +87,7 @@ drm_gem_fb_alloc(struct drm_device *dev,
 
 /**
  * drm_gem_fb_destroy - Free GEM backed framebuffer
- * @fb: DRM framebuffer
+ * @fb: Framebuffer
  *
  * Frees a GEM backed framebuffer with its backing buffer(s) and the structure
  * itself. Drivers can use this as their &drm_framebuffer_funcs->destroy
@@ -102,12 +107,13 @@ EXPORT_SYMBOL(drm_gem_fb_destroy);
 
 /**
  * drm_gem_fb_create_handle - Create handle for GEM backed framebuffer
- * @fb: DRM framebuffer
- * @file: drm file
- * @handle: handle created
+ * @fb: Framebuffer
+ * @file: DRM file to register the handle for
+ * @handle: Pointer to return the created handle
  *
+ * This function creates a handle for the GEM object backing the framebuffer.
  * Drivers can use this as their &drm_framebuffer_funcs->create_handle
- * callback.
+ * callback. The GETFB IOCTL calls into this callback.
  *
  * Returns:
  * 0 on success or a negative error code on failure.
@@ -120,18 +126,21 @@ int drm_gem_fb_create_handle(struct drm_framebuffer *fb, struct drm_file *file,
 EXPORT_SYMBOL(drm_gem_fb_create_handle);
 
 /**
- * drm_gem_fb_create_with_funcs() - helper function for the
+ * drm_gem_fb_create_with_funcs() - Helper function for the
  *                                  &drm_mode_config_funcs.fb_create
  *                                  callback
  * @dev: DRM device
- * @file: drm file for the ioctl call
- * @mode_cmd: metadata from the userspace fb creation request
+ * @file: DRM file that holds the GEM handle(s) backing the framebuffer
+ * @mode_cmd: Metadata from the userspace framebuffer creation request
  * @funcs: vtable to be used for the new framebuffer object
  *
  * This can be used to set &drm_framebuffer_funcs for drivers that need the
  * &drm_framebuffer_funcs.dirty callback. Use drm_gem_fb_create() if you don't
  * need to change &drm_framebuffer_funcs.
  * The function does buffer size validation.
+ *
+ * Returns:
+ * Pointer to a &drm_framebuffer on success or an error pointer on failure.
  */
 struct drm_framebuffer *
 drm_gem_fb_create_with_funcs(struct drm_device *dev, struct drm_file *file,
@@ -192,15 +201,26 @@ static const struct drm_framebuffer_funcs drm_gem_fb_funcs = {
 };
 
 /**
- * drm_gem_fb_create() - &drm_mode_config_funcs.fb_create callback function
+ * drm_gem_fb_create() - Helper function for the
+ *                       &drm_mode_config_funcs.fb_create callback
  * @dev: DRM device
- * @file: drm file for the ioctl call
- * @mode_cmd: metadata from the userspace fb creation request
+ * @file: DRM file that holds the GEM handle(s) backing the framebuffer
+ * @mode_cmd: Metadata from the userspace framebuffer creation request
+ *
+ * This function creates a new framebuffer object described by
+ * &drm_mode_fb_cmd2. This description includes handles for the buffer(s)
+ * backing the framebuffer.
  *
  * If your hardware has special alignment or pitch requirements these should be
  * checked before calling this function. The function does buffer size
  * validation. Use drm_gem_fb_create_with_funcs() if you need to set
  * &drm_framebuffer_funcs.dirty.
+ *
+ * Drivers can use this as their &drm_mode_config_funcs.fb_create callback.
+ * The ADDFB2 IOCTL calls into this callback.
+ *
+ * Returns:
+ * Pointer to a &drm_framebuffer on success or an error pointer on failure.
  */
 struct drm_framebuffer *
 drm_gem_fb_create(struct drm_device *dev, struct drm_file *file,
@@ -212,15 +232,15 @@ drm_gem_fb_create(struct drm_device *dev, struct drm_file *file,
 EXPORT_SYMBOL_GPL(drm_gem_fb_create);
 
 /**
- * drm_gem_fb_prepare_fb() - Prepare gem framebuffer
- * @plane: Which plane
- * @state: Plane state attach fence to
+ * drm_gem_fb_prepare_fb() - Prepare a GEM backed framebuffer
+ * @plane: Plane
+ * @state: Plane state the fence will be attached to
  *
- * This can be used as the &drm_plane_helper_funcs.prepare_fb hook.
- *
- * This function checks if the plane FB has an dma-buf attached, extracts
- * the exclusive fence and attaches it to plane state for the atomic helper
- * to wait on.
+ * This function prepares a GEM backed framebuffer for scanout by checking if
+ * the plane framebuffer has a DMA-BUF attached. If it does, it extracts the
+ * exclusive fence and attaches it to the plane state for the atomic helper to
+ * wait on. This function can be used as the &drm_plane_helper_funcs.prepare_fb
+ * callback.
  *
  * There is no need for &drm_plane_helper_funcs.cleanup_fb hook for simple
  * gem based framebuffer drivers which have their buffers always pinned in
@@ -246,17 +266,19 @@ int drm_gem_fb_prepare_fb(struct drm_plane *plane,
 EXPORT_SYMBOL_GPL(drm_gem_fb_prepare_fb);
 
 /**
- * drm_gem_fbdev_fb_create - Create a drm_framebuffer for fbdev emulation
+ * drm_gem_fbdev_fb_create - Create a GEM backed &drm_framebuffer for fbdev
+ *                           emulation
  * @dev: DRM device
  * @sizes: fbdev size description
- * @pitch_align: optional pitch alignment
+ * @pitch_align: Optional pitch alignment
  * @obj: GEM object backing the framebuffer
  * @funcs: vtable to be used for the new framebuffer object
  *
- * This function creates a framebuffer for use with fbdev emulation.
+ * This function creates a framebuffer from a &drm_fb_helper_surface_size
+ * description for use in the &drm_fb_helper_funcs.fb_probe callback.
  *
  * Returns:
- * Pointer to a drm_framebuffer on success or an error pointer on failure.
+ * Pointer to a &drm_framebuffer on success or an error pointer on failure.
  */
 struct drm_framebuffer *
 drm_gem_fbdev_fb_create(struct drm_device *dev,

drivers/gpu/drm/drm_of.c

@@ -262,3 +262,36 @@ int drm_of_find_panel_or_bridge(const struct device_node *np,
 	return ret;
 }
 EXPORT_SYMBOL_GPL(drm_of_find_panel_or_bridge);
+
+#ifdef CONFIG_DRM_PANEL_BRIDGE
+/*
+ * drm_of_panel_bridge_remove - remove panel bridge
+ * @np: device tree node containing panel bridge output ports
+ *
+ * Remove the panel bridge of a given DT node's port and endpoint number
+ *
+ * Returns zero if successful, or one of the standard error codes if it fails.
+ */
+int drm_of_panel_bridge_remove(const struct device_node *np,
+			       int port, int endpoint)
+{
+	struct drm_bridge *bridge;
+	struct device_node *remote;
+
+	remote = of_graph_get_remote_node(np, port, endpoint);
+	if (!remote)
+		return -ENODEV;
+
+	bridge = of_drm_find_bridge(remote);
+	drm_panel_bridge_remove(bridge);
+
+	return 0;
+}
+#else
+int drm_of_panel_bridge_remove(const struct device_node *np,
+			       int port, int endpoint)
+{
+	return -EINVAL;
+}
+#endif
+EXPORT_SYMBOL_GPL(drm_of_panel_bridge_remove);

drivers/gpu/drm/msm/mdp/mdp5/mdp5_kms.c

@@ -599,7 +599,7 @@ static u32 mdp5_get_vblank_counter(struct drm_device *dev, unsigned int pipe)
 	struct drm_crtc *crtc;
 	struct drm_encoder *encoder;
 
-	if (pipe < 0 || pipe >= priv->num_crtcs)
+	if (pipe >= priv->num_crtcs)
 		return 0;
 
 	crtc = priv->crtcs[pipe];

drivers/gpu/drm/panel/Kconfig

@@ -82,6 +82,14 @@ config DRM_PANEL_PANASONIC_VVX10F034N00
 	  WUXGA (1920x1200) Novatek NT1397-based DSI panel as found in some
 	  Xperia Z2 tablets
 
+config DRM_PANEL_RASPBERRYPI_TOUCHSCREEN
+	tristate "Raspberry Pi 7-inch touchscreen panel"
+	depends on DRM_MIPI_DSI
+	help
+	  Say Y here if you want to enable support for the Raspberry
+	  Pi 7" Touchscreen.  To compile this driver as a module,
+	  choose M here.
+
 config DRM_PANEL_SAMSUNG_S6E3HA2
 	tristate "Samsung S6E3HA2 DSI video mode panel"
 	depends on OF

drivers/gpu/drm/panel/Makefile

@@ -5,6 +5,7 @@ obj-$(CONFIG_DRM_PANEL_JDI_LT070ME05000) += panel-jdi-lt070me05000.o
 obj-$(CONFIG_DRM_PANEL_LG_LG4573) += panel-lg-lg4573.o
 obj-$(CONFIG_DRM_PANEL_ORISETECH_OTM8009A) += panel-orisetech-otm8009a.o
 obj-$(CONFIG_DRM_PANEL_PANASONIC_VVX10F034N00) += panel-panasonic-vvx10f034n00.o
+obj-$(CONFIG_DRM_PANEL_RASPBERRYPI_TOUCHSCREEN) += panel-raspberrypi-touchscreen.o
 obj-$(CONFIG_DRM_PANEL_SAMSUNG_LD9040) += panel-samsung-ld9040.o
 obj-$(CONFIG_DRM_PANEL_SAMSUNG_S6E3HA2) += panel-samsung-s6e3ha2.o
 obj-$(CONFIG_DRM_PANEL_SAMSUNG_S6E63J0X03) += panel-samsung-s6e63j0x03.o

drivers/gpu/drm/panel/panel-raspberrypi-touchscreen.c

@@ -0,0 +1,514 @@
+/*
+ * Copyright © 2016-2017 Broadcom
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Portions of this file (derived from panel-simple.c) are:
+ *
+ * Copyright (C) 2013, NVIDIA Corporation.  All rights reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sub license,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the
+ * next paragraph) shall be included in all copies or substantial portions
+ * of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+ * DEALINGS IN THE SOFTWARE.
+ */
+
+/**
+ * Raspberry Pi 7" touchscreen panel driver.
+ *
+ * The 7" touchscreen consists of a DPI LCD panel, a Toshiba
+ * TC358762XBG DSI-DPI bridge, and an I2C-connected Atmel ATTINY88-MUR
+ * controlling power management, the LCD PWM, and initial register
+ * setup of the Tohsiba.
+ *
+ * This driver controls the TC358762 and ATTINY88, presenting a DSI
+ * device with a drm_panel.
+ */
+
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/fb.h>
+#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_graph.h>
+#include <linux/pm.h>
+
+#include <drm/drm_panel.h>
+#include <drm/drmP.h>
+#include <drm/drm_crtc.h>
+#include <drm/drm_mipi_dsi.h>
+#include <drm/drm_panel.h>
+
+#define RPI_DSI_DRIVER_NAME "rpi-ts-dsi"
+
+/* I2C registers of the Atmel microcontroller. */
+enum REG_ADDR {
+	REG_ID = 0x80,
+	REG_PORTA, /* BIT(2) for horizontal flip, BIT(3) for vertical flip */
+	REG_PORTB,
+	REG_PORTC,
+	REG_PORTD,
+	REG_POWERON,
+	REG_PWM,
+	REG_DDRA,
+	REG_DDRB,
+	REG_DDRC,
+	REG_DDRD,
+	REG_TEST,
+	REG_WR_ADDRL,
+	REG_WR_ADDRH,
+	REG_READH,
+	REG_READL,
+	REG_WRITEH,
+	REG_WRITEL,
+	REG_ID2,
+};
+
+/* DSI D-PHY Layer Registers */
+#define D0W_DPHYCONTTX		0x0004
+#define CLW_DPHYCONTRX		0x0020
+#define D0W_DPHYCONTRX		0x0024
+#define D1W_DPHYCONTRX		0x0028
+#define COM_DPHYCONTRX		0x0038
+#define CLW_CNTRL		0x0040
+#define D0W_CNTRL		0x0044
+#define D1W_CNTRL		0x0048
+#define DFTMODE_CNTRL		0x0054
+
+/* DSI PPI Layer Registers */
+#define PPI_STARTPPI		0x0104
+#define PPI_BUSYPPI		0x0108
+#define PPI_LINEINITCNT		0x0110
+#define PPI_LPTXTIMECNT		0x0114
+#define PPI_CLS_ATMR		0x0140
+#define PPI_D0S_ATMR		0x0144
+#define PPI_D1S_ATMR		0x0148
+#define PPI_D0S_CLRSIPOCOUNT	0x0164
+#define PPI_D1S_CLRSIPOCOUNT	0x0168
+#define CLS_PRE			0x0180
+#define D0S_PRE			0x0184
+#define D1S_PRE			0x0188
+#define CLS_PREP		0x01A0
+#define D0S_PREP		0x01A4
+#define D1S_PREP		0x01A8
+#define CLS_ZERO		0x01C0
+#define D0S_ZERO		0x01C4
+#define D1S_ZERO		0x01C8
+#define PPI_CLRFLG		0x01E0
+#define PPI_CLRSIPO		0x01E4
+#define HSTIMEOUT		0x01F0
+#define HSTIMEOUTENABLE		0x01F4
+
+/* DSI Protocol Layer Registers */
+#define DSI_STARTDSI		0x0204
+#define DSI_BUSYDSI		0x0208
+#define DSI_LANEENABLE		0x0210
+# define DSI_LANEENABLE_CLOCK		BIT(0)
+# define DSI_LANEENABLE_D0		BIT(1)
+# define DSI_LANEENABLE_D1		BIT(2)
+
+#define DSI_LANESTATUS0		0x0214
+#define DSI_LANESTATUS1		0x0218
+#define DSI_INTSTATUS		0x0220
+#define DSI_INTMASK		0x0224
+#define DSI_INTCLR		0x0228
+#define DSI_LPTXTO		0x0230
+#define DSI_MODE		0x0260
+#define DSI_PAYLOAD0		0x0268
+#define DSI_PAYLOAD1		0x026C
+#define DSI_SHORTPKTDAT		0x0270
+#define DSI_SHORTPKTREQ		0x0274
+#define DSI_BTASTA		0x0278
+#define DSI_BTACLR		0x027C
+
+/* DSI General Registers */
+#define DSIERRCNT		0x0300
+#define DSISIGMOD		0x0304
+
+/* DSI Application Layer Registers */
+#define APLCTRL			0x0400
+#define APLSTAT			0x0404
+#define APLERR			0x0408
+#define PWRMOD			0x040C
+#define RDPKTLN			0x0410
+#define PXLFMT			0x0414
+#define MEMWRCMD		0x0418
+
+/* LCDC/DPI Host Registers */
+#define LCDCTRL			0x0420
+#define HSR			0x0424
+#define HDISPR			0x0428
+#define VSR			0x042C
+#define VDISPR			0x0430
+#define VFUEN			0x0434
+
+/* DBI-B Host Registers */
+#define DBIBCTRL		0x0440
+
+/* SPI Master Registers */
+#define SPICMR			0x0450
+#define SPITCR			0x0454
+
+/* System Controller Registers */
+#define SYSSTAT			0x0460
+#define SYSCTRL			0x0464
+#define SYSPLL1			0x0468
+#define SYSPLL2			0x046C
+#define SYSPLL3			0x0470
+#define SYSPMCTRL		0x047C
+
+/* GPIO Registers */
+#define GPIOC			0x0480
+#define GPIOO			0x0484
+#define GPIOI			0x0488
+
+/* I2C Registers */
+#define I2CCLKCTRL		0x0490
+
+/* Chip/Rev Registers */
+#define IDREG			0x04A0
+
+/* Debug Registers */
+#define WCMDQUEUE		0x0500
+#define RCMDQUEUE		0x0504
+
+struct rpi_touchscreen {
+	struct drm_panel base;
+	struct mipi_dsi_device *dsi;
+	struct i2c_client *i2c;
+};
+
+static const struct drm_display_mode rpi_touchscreen_modes[] = {
+	{
+		/* Modeline comes from the Raspberry Pi firmware, with HFP=1
+		 * plugged in and clock re-computed from that.
+		 */
+		.clock = 25979400 / 1000,
+		.hdisplay = 800,
+		.hsync_start = 800 + 1,
+		.hsync_end = 800 + 1 + 2,
+		.htotal = 800 + 1 + 2 + 46,
+		.vdisplay = 480,
+		.vsync_start = 480 + 7,
+		.vsync_end = 480 + 7 + 2,
+		.vtotal = 480 + 7 + 2 + 21,
+		.vrefresh = 60,
+	},
+};
+
+static struct rpi_touchscreen *panel_to_ts(struct drm_panel *panel)
+{
+	return container_of(panel, struct rpi_touchscreen, base);
+}
+
+static u8 rpi_touchscreen_i2c_read(struct rpi_touchscreen *ts, u8 reg)
+{
+	return i2c_smbus_read_byte_data(ts->i2c, reg);
+}
+
+static void rpi_touchscreen_i2c_write(struct rpi_touchscreen *ts,
+				      u8 reg, u8 val)
+{
+	int ret;
+
+	ret = i2c_smbus_write_byte_data(ts->i2c, reg, val);
+	if (ret)
+		dev_err(&ts->dsi->dev, "I2C write failed: %d\n", ret);
+}
+
+static int rpi_touchscreen_write(struct rpi_touchscreen *ts, u16 reg, u32 val)
+{
+#if 0
+	/* The firmware uses LP DSI transactions like this to bring up
+	 * the hardware, which should be faster than using I2C to then
+	 * pass to the Toshiba.  However, I was unable to get it to
+	 * work.
+	 */
+	u8 msg[] = {
+		reg,
+		reg >> 8,
+		val,
+		val >> 8,
+		val >> 16,
+		val >> 24,
+	};
+
+	mipi_dsi_dcs_write_buffer(ts->dsi, msg, sizeof(msg));
+#else
+	rpi_touchscreen_i2c_write(ts, REG_WR_ADDRH, reg >> 8);
+	rpi_touchscreen_i2c_write(ts, REG_WR_ADDRL, reg);
+	rpi_touchscreen_i2c_write(ts, REG_WRITEH, val >> 8);
+	rpi_touchscreen_i2c_write(ts, REG_WRITEL, val);
+#endif
+
+	return 0;
+}
+
+static int rpi_touchscreen_disable(struct drm_panel *panel)
+{
+	struct rpi_touchscreen *ts = panel_to_ts(panel);
+
+	rpi_touchscreen_i2c_write(ts, REG_PWM, 0);
+
+	rpi_touchscreen_i2c_write(ts, REG_POWERON, 0);
+	udelay(1);
+
+	return 0;
+}
+
+static int rpi_touchscreen_noop(struct drm_panel *panel)
+{
+	return 0;
+}
+
+static int rpi_touchscreen_enable(struct drm_panel *panel)
+{
+	struct rpi_touchscreen *ts = panel_to_ts(panel);
+	int i;
+
+	rpi_touchscreen_i2c_write(ts, REG_POWERON, 1);
+	/* Wait for nPWRDWN to go low to indicate poweron is done. */
+	for (i = 0; i < 100; i++) {
+		if (rpi_touchscreen_i2c_read(ts, REG_PORTB) & 1)
+			break;
+	}
+
+	rpi_touchscreen_write(ts, DSI_LANEENABLE,
+			      DSI_LANEENABLE_CLOCK |
+			      DSI_LANEENABLE_D0);
+	rpi_touchscreen_write(ts, PPI_D0S_CLRSIPOCOUNT, 0x05);
+	rpi_touchscreen_write(ts, PPI_D1S_CLRSIPOCOUNT, 0x05);
+	rpi_touchscreen_write(ts, PPI_D0S_ATMR, 0x00);
+	rpi_touchscreen_write(ts, PPI_D1S_ATMR, 0x00);
+	rpi_touchscreen_write(ts, PPI_LPTXTIMECNT, 0x03);
+
+	rpi_touchscreen_write(ts, SPICMR, 0x00);
+	rpi_touchscreen_write(ts, LCDCTRL, 0x00100150);
+	rpi_touchscreen_write(ts, SYSCTRL, 0x040f);
+	msleep(100);
+
+	rpi_touchscreen_write(ts, PPI_STARTPPI, 0x01);
+	rpi_touchscreen_write(ts, DSI_STARTDSI, 0x01);
+	msleep(100);
+
+	/* Turn on the backlight. */
+	rpi_touchscreen_i2c_write(ts, REG_PWM, 255);
+
+	/* Default to the same orientation as the closed source
+	 * firmware used for the panel.  Runtime rotation
+	 * configuration will be supported using VC4's plane
+	 * orientation bits.
+	 */
+	rpi_touchscreen_i2c_write(ts, REG_PORTA, BIT(2));
+
+	return 0;
+}
+
+static int rpi_touchscreen_get_modes(struct drm_panel *panel)
+{
+	struct drm_connector *connector = panel->connector;
+	struct drm_device *drm = panel->drm;
+	unsigned int i, num = 0;
+	static const u32 bus_format = MEDIA_BUS_FMT_RGB888_1X24;
+
+	for (i = 0; i < ARRAY_SIZE(rpi_touchscreen_modes); i++) {
+		const struct drm_display_mode *m = &rpi_touchscreen_modes[i];
+		struct drm_display_mode *mode;
+
+		mode = drm_mode_duplicate(drm, m);
+		if (!mode) {
+			dev_err(drm->dev, "failed to add mode %ux%u@%u\n",
+				m->hdisplay, m->vdisplay, m->vrefresh);
+			continue;
+		}
+
+		mode->type |= DRM_MODE_TYPE_DRIVER;
+
+		if (i == 0)
+			mode->type |= DRM_MODE_TYPE_PREFERRED;
+
+		drm_mode_set_name(mode);
+
+		drm_mode_probed_add(connector, mode);
+		num++;
+	}
+
+	connector->display_info.bpc = 8;
+	connector->display_info.width_mm = 154;
+	connector->display_info.height_mm = 86;
+	drm_display_info_set_bus_formats(&connector->display_info,
+					 &bus_format, 1);
+
+	return num;
+}
+
+static const struct drm_panel_funcs rpi_touchscreen_funcs = {
+	.disable = rpi_touchscreen_disable,
+	.unprepare = rpi_touchscreen_noop,
+	.prepare = rpi_touchscreen_noop,
+	.enable = rpi_touchscreen_enable,
+	.get_modes = rpi_touchscreen_get_modes,
+};
+
+static int rpi_touchscreen_probe(struct i2c_client *i2c,
+				 const struct i2c_device_id *id)
+{
+	struct device *dev = &i2c->dev;
+	struct rpi_touchscreen *ts;
+	struct device_node *endpoint, *dsi_host_node;
+	struct mipi_dsi_host *host;
+	int ret, ver;
+	struct mipi_dsi_device_info info = {
+		.type = RPI_DSI_DRIVER_NAME,
+		.channel = 0,
+		.node = NULL,
+	};
+
+	ts = devm_kzalloc(dev, sizeof(*ts), GFP_KERNEL);
+	if (!ts)
+		return -ENOMEM;
+
+	i2c_set_clientdata(i2c, ts);
+
+	ts->i2c = i2c;
+
+	ver = rpi_touchscreen_i2c_read(ts, REG_ID);
+	if (ver < 0) {
+		dev_err(dev, "Atmel I2C read failed: %d\n", ver);
+		return -ENODEV;
+	}
+
+	switch (ver) {
+	case 0xde: /* ver 1 */
+	case 0xc3: /* ver 2 */
+		break;
+	default:
+		dev_err(dev, "Unknown Atmel firmware revision: 0x%02x\n", ver);
+		return -ENODEV;
+	}
+
+	/* Turn off at boot, so we can cleanly sequence powering on. */
+	rpi_touchscreen_i2c_write(ts, REG_POWERON, 0);
+
+	/* Look up the DSI host.  It needs to probe before we do. */
+	endpoint = of_graph_get_next_endpoint(dev->of_node, NULL);
+	dsi_host_node = of_graph_get_remote_port_parent(endpoint);
+	host = of_find_mipi_dsi_host_by_node(dsi_host_node);
+	of_node_put(dsi_host_node);
+	if (!host) {
+		of_node_put(endpoint);
+		return -EPROBE_DEFER;
+	}
+
+	info.node = of_graph_get_remote_port(endpoint);
+	of_node_put(endpoint);
+
+	ts->dsi = mipi_dsi_device_register_full(host, &info);
+	if (IS_ERR(ts->dsi)) {
+		dev_err(dev, "DSI device registration failed: %ld\n",
+			PTR_ERR(ts->dsi));
+		return PTR_ERR(ts->dsi);
+	}
+
+	ts->base.dev = dev;
+	ts->base.funcs = &rpi_touchscreen_funcs;
+
+	/* This appears last, as it's what will unblock the DSI host
+	 * driver's component bind function.
+	 */
+	ret = drm_panel_add(&ts->base);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static int rpi_touchscreen_remove(struct i2c_client *i2c)
+{
+	struct rpi_touchscreen *ts = i2c_get_clientdata(i2c);
+
+	mipi_dsi_detach(ts->dsi);
+
+	drm_panel_remove(&ts->base);
+
+	mipi_dsi_device_unregister(ts->dsi);
+	kfree(ts->dsi);
+
+	return 0;
+}
+
+static int rpi_touchscreen_dsi_probe(struct mipi_dsi_device *dsi)
+{
+	int ret;
+
+	dsi->mode_flags = (MIPI_DSI_MODE_VIDEO |
+			   MIPI_DSI_MODE_VIDEO_SYNC_PULSE |
+			   MIPI_DSI_MODE_LPM);
+	dsi->format = MIPI_DSI_FMT_RGB888;
+	dsi->lanes = 1;
+
+	ret = mipi_dsi_attach(dsi);
+
+	if (ret)
+		dev_err(&dsi->dev, "failed to attach dsi to host: %d\n", ret);
+
+	return ret;
+}
+
+static struct mipi_dsi_driver rpi_touchscreen_dsi_driver = {
+	.driver.name = RPI_DSI_DRIVER_NAME,
+	.probe = rpi_touchscreen_dsi_probe,
+};
+
+static const struct of_device_id rpi_touchscreen_of_ids[] = {
+	{ .compatible = "raspberrypi,7inch-touchscreen-panel" },
+	{ } /* sentinel */
+};
+MODULE_DEVICE_TABLE(of, rpi_touchscreen_of_ids);
+
+static struct i2c_driver rpi_touchscreen_driver = {
+	.driver = {
+		.name = "rpi_touchscreen",
+		.of_match_table = rpi_touchscreen_of_ids,
+	},
+	.probe = rpi_touchscreen_probe,
+	.remove = rpi_touchscreen_remove,
+};
+
+static int __init rpi_touchscreen_init(void)
+{
+	mipi_dsi_driver_register(&rpi_touchscreen_dsi_driver);
+	return i2c_add_driver(&rpi_touchscreen_driver);
+}
+module_init(rpi_touchscreen_init);
+
+static void __exit rpi_touchscreen_exit(void)
+{
+	i2c_del_driver(&rpi_touchscreen_driver);
+	mipi_dsi_driver_unregister(&rpi_touchscreen_dsi_driver);
+}
+module_exit(rpi_touchscreen_exit);
+
+MODULE_AUTHOR("Eric Anholt <eric@anholt.net>");
+MODULE_DESCRIPTION("Raspberry Pi 7-inch touchscreen driver");
+MODULE_LICENSE("GPL v2");

drivers/gpu/drm/stm/ltdc.c

@@ -791,9 +791,8 @@ static const struct drm_encoder_funcs ltdc_encoder_funcs = {
 	.destroy = drm_encoder_cleanup,
 };
 
-static int ltdc_encoder_init(struct drm_device *ddev)
+static int ltdc_encoder_init(struct drm_device *ddev, struct drm_bridge *bridge)
 {
-	struct ltdc_device *ldev = ddev->dev_private;
 	struct drm_encoder *encoder;
 	int ret;
 
@@ -807,7 +806,7 @@ static int ltdc_encoder_init(struct drm_device *ddev)
 	drm_encoder_init(ddev, encoder, &ltdc_encoder_funcs,
 			 DRM_MODE_ENCODER_DPI, NULL);
 
-	ret = drm_bridge_attach(encoder, ldev->bridge, NULL);
+	ret = drm_bridge_attach(encoder, bridge, NULL);
 	if (ret) {
 		drm_encoder_cleanup(encoder);
 		return -EINVAL;
@@ -936,12 +935,9 @@ int ltdc_load(struct drm_device *ddev)
 			ret = PTR_ERR(bridge);
 			goto err;
 		}
-		ldev->is_panel_bridge = true;
 	}
 
-	ldev->bridge = bridge;
-
-	ret = ltdc_encoder_init(ddev);
+	ret = ltdc_encoder_init(ddev, bridge);
 	if (ret) {
 		DRM_ERROR("Failed to init encoder\n");
 		goto err;
@@ -972,8 +968,7 @@ int ltdc_load(struct drm_device *ddev)
 	return 0;
 
 err:
-	if (ldev->is_panel_bridge)
-		drm_panel_bridge_remove(bridge);
+	drm_panel_bridge_remove(bridge);
 
 	clk_disable_unprepare(ldev->pixel_clk);
 
@@ -986,8 +981,7 @@ void ltdc_unload(struct drm_device *ddev)
 
 	DRM_DEBUG_DRIVER("\n");
 
-	if (ldev->is_panel_bridge)
-		drm_panel_bridge_remove(ldev->bridge);
+	drm_of_panel_bridge_remove(ddev->dev->of_node, 0, 0);
 
 	clk_disable_unprepare(ldev->pixel_clk);
 }

drivers/gpu/drm/stm/ltdc.h

@@ -24,8 +24,6 @@ struct ltdc_device {
 	struct drm_fbdev_cma *fbdev;
 	void __iomem *regs;
 	struct clk *pixel_clk;	/* lcd pixel clock */
-	struct drm_bridge *bridge;
-	bool is_panel_bridge;
 	struct mutex err_lock;	/* protecting error_status */
 	struct ltdc_caps caps;
 	u32 error_status;

drivers/gpu/drm/sun4i/sun4i_hdmi.h

@@ -14,6 +14,7 @@
 
 #include <drm/drm_connector.h>
 #include <drm/drm_encoder.h>
+#include <linux/regmap.h>
 
 #include <media/cec-pin.h>
 
@@ -58,10 +59,13 @@
 #define SUN4I_HDMI_PAD_CTRL0_TXEN		BIT(23)
 
 #define SUN4I_HDMI_PAD_CTRL1_REG	0x204
+#define SUN4I_HDMI_PAD_CTRL1_UNKNOWN		BIT(24)	/* set on A31 */
 #define SUN4I_HDMI_PAD_CTRL1_AMP_OPT		BIT(23)
 #define SUN4I_HDMI_PAD_CTRL1_AMPCK_OPT		BIT(22)
 #define SUN4I_HDMI_PAD_CTRL1_EMP_OPT		BIT(20)
 #define SUN4I_HDMI_PAD_CTRL1_EMPCK_OPT		BIT(19)
+#define SUN4I_HDMI_PAD_CTRL1_PWSCK		BIT(18)
+#define SUN4I_HDMI_PAD_CTRL1_PWSDT		BIT(17)
 #define SUN4I_HDMI_PAD_CTRL1_REG_DEN		BIT(15)
 #define SUN4I_HDMI_PAD_CTRL1_REG_DENCK		BIT(14)
 #define SUN4I_HDMI_PAD_CTRL1_REG_EMP(n)		(((n) & 7) << 10)
@@ -152,21 +156,106 @@
 
 #define SUN4I_HDMI_DDC_FIFO_SIZE	16
 
+/* A31 specific */
+#define SUN6I_HDMI_DDC_CTRL_REG		0x500
+#define SUN6I_HDMI_DDC_CTRL_RESET		BIT(31)
+#define SUN6I_HDMI_DDC_CTRL_START_CMD		BIT(27)
+#define SUN6I_HDMI_DDC_CTRL_SDA_ENABLE		BIT(6)
+#define SUN6I_HDMI_DDC_CTRL_SCL_ENABLE		BIT(4)
+#define SUN6I_HDMI_DDC_CTRL_ENABLE		BIT(0)
+
+#define SUN6I_HDMI_DDC_CMD_REG		0x508
+#define SUN6I_HDMI_DDC_CMD_BYTE_COUNT(count)	((count) << 16)
+/* command types in lower 3 bits are the same as sun4i */
+
+#define SUN6I_HDMI_DDC_ADDR_REG		0x50c
+#define SUN6I_HDMI_DDC_ADDR_SEGMENT(seg)	(((seg) & 0xff) << 24)
+#define SUN6I_HDMI_DDC_ADDR_EDDC(addr)		(((addr) & 0xff) << 16)
+#define SUN6I_HDMI_DDC_ADDR_OFFSET(off)		(((off) & 0xff) << 8)
+#define SUN6I_HDMI_DDC_ADDR_SLAVE(addr)		(((addr) & 0xff) << 1)
+
+#define SUN6I_HDMI_DDC_INT_STATUS_REG	0x514
+#define SUN6I_HDMI_DDC_INT_STATUS_TIMEOUT	BIT(8)
+/* lower 8 bits are the same as sun4i */
+
+#define SUN6I_HDMI_DDC_FIFO_CTRL_REG	0x518
+#define SUN6I_HDMI_DDC_FIFO_CTRL_CLEAR		BIT(15)
+/* lower 9 bits are the same as sun4i */
+
+#define SUN6I_HDMI_DDC_CLK_REG		0x520
+/* DDC CLK bit fields are the same, but the formula is not */
+
+#define SUN6I_HDMI_DDC_FIFO_DATA_REG	0x580
+
 enum sun4i_hdmi_pkt_type {
 	SUN4I_HDMI_PKT_AVI = 2,
 	SUN4I_HDMI_PKT_END = 15,
 };
 
+struct sun4i_hdmi_variant {
+	bool has_ddc_parent_clk;
+	bool has_reset_control;
+
+	u32 pad_ctrl0_init_val;
+	u32 pad_ctrl1_init_val;
+	u32 pll_ctrl_init_val;
+
+	struct reg_field ddc_clk_reg;
+	u8 ddc_clk_pre_divider;
+	u8 ddc_clk_m_offset;
+
+	u8 tmds_clk_div_offset;
+
+	/* Register fields for I2C adapter */
+	struct reg_field	field_ddc_en;
+	struct reg_field	field_ddc_start;
+	struct reg_field	field_ddc_reset;
+	struct reg_field	field_ddc_addr_reg;
+	struct reg_field	field_ddc_slave_addr;
+	struct reg_field	field_ddc_int_mask;
+	struct reg_field	field_ddc_int_status;
+	struct reg_field	field_ddc_fifo_clear;
+	struct reg_field	field_ddc_fifo_rx_thres;
+	struct reg_field	field_ddc_fifo_tx_thres;
+	struct reg_field	field_ddc_byte_count;
+	struct reg_field	field_ddc_cmd;
+	struct reg_field	field_ddc_sda_en;
+	struct reg_field	field_ddc_sck_en;
+
+	/* DDC FIFO register offset */
+	u32			ddc_fifo_reg;
+
+	/*
+	 * DDC FIFO threshold boundary conditions
+	 *
+	 * This is used to cope with the threshold boundary condition
+	 * being slightly different on sun5i and sun6i.
+	 *
+	 * On sun5i the threshold is exclusive, i.e. does not include,
+	 * the value of the threshold. ( > for RX; < for TX )
+	 * On sun6i the threshold is inclusive, i.e. includes, the
+	 * value of the threshold. ( >= for RX; <= for TX )
+	 */
+	bool			ddc_fifo_thres_incl;
+
+	bool			ddc_fifo_has_dir;
+};
+
 struct sun4i_hdmi {
 	struct drm_connector	connector;
 	struct drm_encoder	encoder;
 	struct device		*dev;
 
 	void __iomem		*base;
+	struct regmap		*regmap;
+
+	/* Reset control */
+	struct reset_control	*reset;
 
 	/* Parent clocks */
 	struct clk		*bus_clk;
 	struct clk		*mod_clk;
+	struct clk		*ddc_parent_clk;
 	struct clk		*pll0_clk;
 	struct clk		*pll1_clk;
 
@@ -176,10 +265,28 @@ struct sun4i_hdmi {
 
 	struct i2c_adapter	*i2c;
 
+	/* Regmap fields for I2C adapter */
+	struct regmap_field	*field_ddc_en;
+	struct regmap_field	*field_ddc_start;
+	struct regmap_field	*field_ddc_reset;
+	struct regmap_field	*field_ddc_addr_reg;
+	struct regmap_field	*field_ddc_slave_addr;
+	struct regmap_field	*field_ddc_int_mask;
+	struct regmap_field	*field_ddc_int_status;
+	struct regmap_field	*field_ddc_fifo_clear;
+	struct regmap_field	*field_ddc_fifo_rx_thres;
+	struct regmap_field	*field_ddc_fifo_tx_thres;
+	struct regmap_field	*field_ddc_byte_count;
+	struct regmap_field	*field_ddc_cmd;
+	struct regmap_field	*field_ddc_sda_en;
+	struct regmap_field	*field_ddc_sck_en;
+
 	struct sun4i_drv	*drv;
 
 	bool			hdmi_monitor;
 	struct cec_adapter	*cec_adap;
+
+	const struct sun4i_hdmi_variant	*variant;
 };
 
 int sun4i_ddc_create(struct sun4i_hdmi *hdmi, struct clk *clk);

drivers/gpu/drm/sun4i/sun4i_hdmi_ddc_clk.c

@@ -11,6 +11,7 @@
  */
 
 #include <linux/clk-provider.h>
+#include <linux/regmap.h>
 
 #include "sun4i_tcon.h"
 #include "sun4i_hdmi.h"
@@ -18,6 +19,9 @@
 struct sun4i_ddc {
 	struct clk_hw		hw;
 	struct sun4i_hdmi	*hdmi;
+	struct regmap_field	*reg;
+	u8			pre_div;
+	u8			m_offset;
 };
 
 static inline struct sun4i_ddc *hw_to_ddc(struct clk_hw *hw)
@@ -27,6 +31,8 @@ static inline struct sun4i_ddc *hw_to_ddc(struct clk_hw *hw)
 
 static unsigned long sun4i_ddc_calc_divider(unsigned long rate,
 					    unsigned long parent_rate,
+					    const u8 pre_div,
+					    const u8 m_offset,
 					    u8 *m, u8 *n)
 {
 	unsigned long best_rate = 0;
@@ -36,7 +42,8 @@ static unsigned long sun4i_ddc_calc_divider(unsigned long rate,
 		for (_n = 0; _n < 8; _n++) {
 			unsigned long tmp_rate;
 
-			tmp_rate = (((parent_rate / 2) / 10) >> _n) / (_m + 1);
+			tmp_rate = (((parent_rate / pre_div) / 10) >> _n) /
+				(_m + m_offset);
 
 			if (tmp_rate > rate)
 				continue;
@@ -60,21 +67,25 @@ static unsigned long sun4i_ddc_calc_divider(unsigned long rate,
 static long sun4i_ddc_round_rate(struct clk_hw *hw, unsigned long rate,
 				 unsigned long *prate)
 {
-	return sun4i_ddc_calc_divider(rate, *prate, NULL, NULL);
+	struct sun4i_ddc *ddc = hw_to_ddc(hw);
+
+	return sun4i_ddc_calc_divider(rate, *prate, ddc->pre_div,
+				      ddc->m_offset, NULL, NULL);
 }
 
 static unsigned long sun4i_ddc_recalc_rate(struct clk_hw *hw,
 					    unsigned long parent_rate)
 {
 	struct sun4i_ddc *ddc = hw_to_ddc(hw);
-	u32 reg;
+	unsigned int reg;
 	u8 m, n;
 
-	reg = readl(ddc->hdmi->base + SUN4I_HDMI_DDC_CLK_REG);
-	m = (reg >> 3) & 0x7;
+	regmap_field_read(ddc->reg, &reg);
+	m = (reg >> 3) & 0xf;
 	n = reg & 0x7;
 
-	return (((parent_rate / 2) / 10) >> n) / (m + 1);
+	return (((parent_rate / ddc->pre_div) / 10) >> n) /
+	       (m + ddc->m_offset);
 }
 
 static int sun4i_ddc_set_rate(struct clk_hw *hw, unsigned long rate,
@@ -83,10 +94,12 @@ static int sun4i_ddc_set_rate(struct clk_hw *hw, unsigned long rate,
 	struct sun4i_ddc *ddc = hw_to_ddc(hw);
 	u8 div_m, div_n;
 
-	sun4i_ddc_calc_divider(rate, parent_rate, &div_m, &div_n);
+	sun4i_ddc_calc_divider(rate, parent_rate, ddc->pre_div,
+			       ddc->m_offset, &div_m, &div_n);
 
-	writel(SUN4I_HDMI_DDC_CLK_M(div_m) | SUN4I_HDMI_DDC_CLK_N(div_n),
-	       ddc->hdmi->base + SUN4I_HDMI_DDC_CLK_REG);
+	regmap_field_write(ddc->reg,
+			   SUN4I_HDMI_DDC_CLK_M(div_m) |
+			   SUN4I_HDMI_DDC_CLK_N(div_n));
 
 	return 0;
 }
@@ -111,6 +124,11 @@ int sun4i_ddc_create(struct sun4i_hdmi *hdmi, struct clk *parent)
 	if (!ddc)
 		return -ENOMEM;
 
+	ddc->reg = devm_regmap_field_alloc(hdmi->dev, hdmi->regmap,
+					   hdmi->variant->ddc_clk_reg);
+	if (IS_ERR(ddc->reg))
+		return PTR_ERR(ddc->reg);
+
 	init.name = "hdmi-ddc";
 	init.ops = &sun4i_ddc_ops;
 	init.parent_names = &parent_name;
@@ -118,6 +136,8 @@ int sun4i_ddc_create(struct sun4i_hdmi *hdmi, struct clk *parent)
 
 	ddc->hdmi = hdmi;
 	ddc->hw.init = &init;
+	ddc->pre_div = hdmi->variant->ddc_clk_pre_divider;
+	ddc->m_offset = hdmi->variant->ddc_clk_m_offset;
 
 	hdmi->ddc_clk = devm_clk_register(hdmi->dev, &ddc->hw);
 	if (IS_ERR(hdmi->ddc_clk))

drivers/gpu/drm/sun4i/sun4i_hdmi_enc.c

@@ -20,8 +20,11 @@
 #include <linux/clk.h>
 #include <linux/component.h>
 #include <linux/iopoll.h>
+#include <linux/of_device.h>
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
+#include <linux/regmap.h>
+#include <linux/reset.h>
 
 #include "sun4i_backend.h"
 #include "sun4i_crtc.h"
@@ -267,6 +270,124 @@ static const struct cec_pin_ops sun4i_hdmi_cec_pin_ops = {
 };
 #endif
 
+#define SUN4I_HDMI_PAD_CTRL1_MASK	(GENMASK(24, 7) | GENMASK(5, 0))
+#define SUN4I_HDMI_PLL_CTRL_MASK	(GENMASK(31, 8) | GENMASK(3, 0))
+
+static const struct sun4i_hdmi_variant sun5i_variant = {
+	.pad_ctrl0_init_val	= SUN4I_HDMI_PAD_CTRL0_TXEN |
+				  SUN4I_HDMI_PAD_CTRL0_CKEN |
+				  SUN4I_HDMI_PAD_CTRL0_PWENG |
+				  SUN4I_HDMI_PAD_CTRL0_PWEND |
+				  SUN4I_HDMI_PAD_CTRL0_PWENC |
+				  SUN4I_HDMI_PAD_CTRL0_LDODEN |
+				  SUN4I_HDMI_PAD_CTRL0_LDOCEN |
+				  SUN4I_HDMI_PAD_CTRL0_BIASEN,
+	.pad_ctrl1_init_val	= SUN4I_HDMI_PAD_CTRL1_REG_AMP(6) |
+				  SUN4I_HDMI_PAD_CTRL1_REG_EMP(2) |
+				  SUN4I_HDMI_PAD_CTRL1_REG_DENCK |
+				  SUN4I_HDMI_PAD_CTRL1_REG_DEN |
+				  SUN4I_HDMI_PAD_CTRL1_EMPCK_OPT |
+				  SUN4I_HDMI_PAD_CTRL1_EMP_OPT |
+				  SUN4I_HDMI_PAD_CTRL1_AMPCK_OPT |
+				  SUN4I_HDMI_PAD_CTRL1_AMP_OPT,
+	.pll_ctrl_init_val	= SUN4I_HDMI_PLL_CTRL_VCO_S(8) |
+				  SUN4I_HDMI_PLL_CTRL_CS(7) |
+				  SUN4I_HDMI_PLL_CTRL_CP_S(15) |
+				  SUN4I_HDMI_PLL_CTRL_S(7) |
+				  SUN4I_HDMI_PLL_CTRL_VCO_GAIN(4) |
+				  SUN4I_HDMI_PLL_CTRL_SDIV2 |
+				  SUN4I_HDMI_PLL_CTRL_LDO2_EN |
+				  SUN4I_HDMI_PLL_CTRL_LDO1_EN |
+				  SUN4I_HDMI_PLL_CTRL_HV_IS_33 |
+				  SUN4I_HDMI_PLL_CTRL_BWS |
+				  SUN4I_HDMI_PLL_CTRL_PLL_EN,
+
+	.ddc_clk_reg		= REG_FIELD(SUN4I_HDMI_DDC_CLK_REG, 0, 6),
+	.ddc_clk_pre_divider	= 2,
+	.ddc_clk_m_offset	= 1,
+
+	.field_ddc_en		= REG_FIELD(SUN4I_HDMI_DDC_CTRL_REG, 31, 31),
+	.field_ddc_start	= REG_FIELD(SUN4I_HDMI_DDC_CTRL_REG, 30, 30),
+	.field_ddc_reset	= REG_FIELD(SUN4I_HDMI_DDC_CTRL_REG, 0, 0),
+	.field_ddc_addr_reg	= REG_FIELD(SUN4I_HDMI_DDC_ADDR_REG, 0, 31),
+	.field_ddc_slave_addr	= REG_FIELD(SUN4I_HDMI_DDC_ADDR_REG, 0, 6),
+	.field_ddc_int_status	= REG_FIELD(SUN4I_HDMI_DDC_INT_STATUS_REG, 0, 8),
+	.field_ddc_fifo_clear	= REG_FIELD(SUN4I_HDMI_DDC_FIFO_CTRL_REG, 31, 31),
+	.field_ddc_fifo_rx_thres = REG_FIELD(SUN4I_HDMI_DDC_FIFO_CTRL_REG, 4, 7),
+	.field_ddc_fifo_tx_thres = REG_FIELD(SUN4I_HDMI_DDC_FIFO_CTRL_REG, 0, 3),
+	.field_ddc_byte_count	= REG_FIELD(SUN4I_HDMI_DDC_BYTE_COUNT_REG, 0, 9),
+	.field_ddc_cmd		= REG_FIELD(SUN4I_HDMI_DDC_CMD_REG, 0, 2),
+	.field_ddc_sda_en	= REG_FIELD(SUN4I_HDMI_DDC_LINE_CTRL_REG, 9, 9),
+	.field_ddc_sck_en	= REG_FIELD(SUN4I_HDMI_DDC_LINE_CTRL_REG, 8, 8),
+
+	.ddc_fifo_reg		= SUN4I_HDMI_DDC_FIFO_DATA_REG,
+	.ddc_fifo_has_dir	= true,
+};
+
+static const struct sun4i_hdmi_variant sun6i_variant = {
+	.has_ddc_parent_clk	= true,
+	.has_reset_control	= true,
+	.pad_ctrl0_init_val	= 0xff |
+				  SUN4I_HDMI_PAD_CTRL0_TXEN |
+				  SUN4I_HDMI_PAD_CTRL0_CKEN |
+				  SUN4I_HDMI_PAD_CTRL0_PWENG |
+				  SUN4I_HDMI_PAD_CTRL0_PWEND |
+				  SUN4I_HDMI_PAD_CTRL0_PWENC |
+				  SUN4I_HDMI_PAD_CTRL0_LDODEN |
+				  SUN4I_HDMI_PAD_CTRL0_LDOCEN,
+	.pad_ctrl1_init_val	= SUN4I_HDMI_PAD_CTRL1_REG_AMP(6) |
+				  SUN4I_HDMI_PAD_CTRL1_REG_EMP(4) |
+				  SUN4I_HDMI_PAD_CTRL1_REG_DENCK |
+				  SUN4I_HDMI_PAD_CTRL1_REG_DEN |
+				  SUN4I_HDMI_PAD_CTRL1_EMPCK_OPT |
+				  SUN4I_HDMI_PAD_CTRL1_EMP_OPT |
+				  SUN4I_HDMI_PAD_CTRL1_PWSDT |
+				  SUN4I_HDMI_PAD_CTRL1_PWSCK |
+				  SUN4I_HDMI_PAD_CTRL1_AMPCK_OPT |
+				  SUN4I_HDMI_PAD_CTRL1_AMP_OPT |
+				  SUN4I_HDMI_PAD_CTRL1_UNKNOWN,
+	.pll_ctrl_init_val	= SUN4I_HDMI_PLL_CTRL_VCO_S(8) |
+				  SUN4I_HDMI_PLL_CTRL_CS(3) |
+				  SUN4I_HDMI_PLL_CTRL_CP_S(10) |
+				  SUN4I_HDMI_PLL_CTRL_S(4) |
+				  SUN4I_HDMI_PLL_CTRL_VCO_GAIN(4) |
+				  SUN4I_HDMI_PLL_CTRL_SDIV2 |
+				  SUN4I_HDMI_PLL_CTRL_LDO2_EN |
+				  SUN4I_HDMI_PLL_CTRL_LDO1_EN |
+				  SUN4I_HDMI_PLL_CTRL_HV_IS_33 |
+				  SUN4I_HDMI_PLL_CTRL_PLL_EN,
+
+	.ddc_clk_reg		= REG_FIELD(SUN6I_HDMI_DDC_CLK_REG, 0, 6),
+	.ddc_clk_pre_divider	= 1,
+	.ddc_clk_m_offset	= 2,
+
+	.tmds_clk_div_offset	= 1,
+
+	.field_ddc_en		= REG_FIELD(SUN6I_HDMI_DDC_CTRL_REG, 0, 0),
+	.field_ddc_start	= REG_FIELD(SUN6I_HDMI_DDC_CTRL_REG, 27, 27),
+	.field_ddc_reset	= REG_FIELD(SUN6I_HDMI_DDC_CTRL_REG, 31, 31),
+	.field_ddc_addr_reg	= REG_FIELD(SUN6I_HDMI_DDC_ADDR_REG, 1, 31),
+	.field_ddc_slave_addr	= REG_FIELD(SUN6I_HDMI_DDC_ADDR_REG, 1, 7),
+	.field_ddc_int_status	= REG_FIELD(SUN6I_HDMI_DDC_INT_STATUS_REG, 0, 8),
+	.field_ddc_fifo_clear	= REG_FIELD(SUN6I_HDMI_DDC_FIFO_CTRL_REG, 18, 18),
+	.field_ddc_fifo_rx_thres = REG_FIELD(SUN6I_HDMI_DDC_FIFO_CTRL_REG, 4, 7),
+	.field_ddc_fifo_tx_thres = REG_FIELD(SUN6I_HDMI_DDC_FIFO_CTRL_REG, 0, 3),
+	.field_ddc_byte_count	= REG_FIELD(SUN6I_HDMI_DDC_CMD_REG, 16, 25),
+	.field_ddc_cmd		= REG_FIELD(SUN6I_HDMI_DDC_CMD_REG, 0, 2),
+	.field_ddc_sda_en	= REG_FIELD(SUN6I_HDMI_DDC_CTRL_REG, 6, 6),
+	.field_ddc_sck_en	= REG_FIELD(SUN6I_HDMI_DDC_CTRL_REG, 4, 4),
+
+	.ddc_fifo_reg		= SUN6I_HDMI_DDC_FIFO_DATA_REG,
+	.ddc_fifo_thres_incl	= true,
+};
+
+static const struct regmap_config sun4i_hdmi_regmap_config = {
+	.reg_bits	= 32,
+	.val_bits	= 32,
+	.reg_stride	= 4,
+	.max_register	= 0x580,
+};
+
 static int sun4i_hdmi_bind(struct device *dev, struct device *master,
 			   void *data)
 {
@@ -285,6 +406,10 @@ static int sun4i_hdmi_bind(struct device *dev, struct device *master,
 	hdmi->dev = dev;
 	hdmi->drv = drv;
 
+	hdmi->variant = of_device_get_match_data(dev);
+	if (!hdmi->variant)
+		return -EINVAL;
+
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	hdmi->base = devm_ioremap_resource(dev, res);
 	if (IS_ERR(hdmi->base)) {
@@ -292,44 +417,76 @@ static int sun4i_hdmi_bind(struct device *dev, struct device *master,
 		return PTR_ERR(hdmi->base);
 	}
 
+	if (hdmi->variant->has_reset_control) {
+		hdmi->reset = devm_reset_control_get(dev, NULL);
+		if (IS_ERR(hdmi->reset)) {
+			dev_err(dev, "Couldn't get the HDMI reset control\n");
+			return PTR_ERR(hdmi->reset);
+		}
+
+		ret = reset_control_deassert(hdmi->reset);
+		if (ret) {
+			dev_err(dev, "Couldn't deassert HDMI reset\n");
+			return ret;
+		}
+	}
+
 	hdmi->bus_clk = devm_clk_get(dev, "ahb");
 	if (IS_ERR(hdmi->bus_clk)) {
 		dev_err(dev, "Couldn't get the HDMI bus clock\n");
-		return PTR_ERR(hdmi->bus_clk);
+		ret = PTR_ERR(hdmi->bus_clk);
+		goto err_assert_reset;
 	}
 	clk_prepare_enable(hdmi->bus_clk);
 
 	hdmi->mod_clk = devm_clk_get(dev, "mod");
 	if (IS_ERR(hdmi->mod_clk)) {
 		dev_err(dev, "Couldn't get the HDMI mod clock\n");
-		return PTR_ERR(hdmi->mod_clk);
+		ret = PTR_ERR(hdmi->mod_clk);
+		goto err_disable_bus_clk;
 	}
 	clk_prepare_enable(hdmi->mod_clk);
 
 	hdmi->pll0_clk = devm_clk_get(dev, "pll-0");
 	if (IS_ERR(hdmi->pll0_clk)) {
 		dev_err(dev, "Couldn't get the HDMI PLL 0 clock\n");
-		return PTR_ERR(hdmi->pll0_clk);
+		ret = PTR_ERR(hdmi->pll0_clk);
+		goto err_disable_mod_clk;
 	}
 
 	hdmi->pll1_clk = devm_clk_get(dev, "pll-1");
 	if (IS_ERR(hdmi->pll1_clk)) {
 		dev_err(dev, "Couldn't get the HDMI PLL 1 clock\n");
-		return PTR_ERR(hdmi->pll1_clk);
+		ret = PTR_ERR(hdmi->pll1_clk);
+		goto err_disable_mod_clk;
+	}
+
+	hdmi->regmap = devm_regmap_init_mmio(dev, hdmi->base,
+					     &sun4i_hdmi_regmap_config);
+	if (IS_ERR(hdmi->regmap)) {
+		dev_err(dev, "Couldn't create HDMI encoder regmap\n");
+		return PTR_ERR(hdmi->regmap);
 	}
 
 	ret = sun4i_tmds_create(hdmi);
 	if (ret) {
 		dev_err(dev, "Couldn't create the TMDS clock\n");
-		return ret;
+		goto err_disable_mod_clk;
+	}
+
+	if (hdmi->variant->has_ddc_parent_clk) {
+		hdmi->ddc_parent_clk = devm_clk_get(dev, "ddc");
+		if (IS_ERR(hdmi->ddc_parent_clk)) {
+			dev_err(dev, "Couldn't get the HDMI DDC clock\n");
+			return PTR_ERR(hdmi->ddc_parent_clk);
+		}
+	} else {
+		hdmi->ddc_parent_clk = hdmi->tmds_clk;
 	}
 
 	writel(SUN4I_HDMI_CTRL_ENABLE, hdmi->base + SUN4I_HDMI_CTRL_REG);
 
-	writel(SUN4I_HDMI_PAD_CTRL0_TXEN | SUN4I_HDMI_PAD_CTRL0_CKEN |
-	       SUN4I_HDMI_PAD_CTRL0_PWENG | SUN4I_HDMI_PAD_CTRL0_PWEND |
-	       SUN4I_HDMI_PAD_CTRL0_PWENC | SUN4I_HDMI_PAD_CTRL0_LDODEN |
-	       SUN4I_HDMI_PAD_CTRL0_LDOCEN | SUN4I_HDMI_PAD_CTRL0_BIASEN,
+	writel(hdmi->variant->pad_ctrl0_init_val,
 	       hdmi->base + SUN4I_HDMI_PAD_CTRL0_REG);
 
 	/*
@@ -339,30 +496,18 @@ static int sun4i_hdmi_bind(struct device *dev, struct device *master,
 	 */
 	reg = readl(hdmi->base + SUN4I_HDMI_PAD_CTRL1_REG);
 	reg &= SUN4I_HDMI_PAD_CTRL1_HALVE_CLK;
-	reg |= SUN4I_HDMI_PAD_CTRL1_REG_AMP(6) |
-		SUN4I_HDMI_PAD_CTRL1_REG_EMP(2) |
-		SUN4I_HDMI_PAD_CTRL1_REG_DENCK |
-		SUN4I_HDMI_PAD_CTRL1_REG_DEN |
-		SUN4I_HDMI_PAD_CTRL1_EMPCK_OPT |
-		SUN4I_HDMI_PAD_CTRL1_EMP_OPT |
-		SUN4I_HDMI_PAD_CTRL1_AMPCK_OPT |
-		SUN4I_HDMI_PAD_CTRL1_AMP_OPT;
+	reg |= hdmi->variant->pad_ctrl1_init_val;
 	writel(reg, hdmi->base + SUN4I_HDMI_PAD_CTRL1_REG);
 
 	reg = readl(hdmi->base + SUN4I_HDMI_PLL_CTRL_REG);
 	reg &= SUN4I_HDMI_PLL_CTRL_DIV_MASK;
-	reg |= SUN4I_HDMI_PLL_CTRL_VCO_S(8) | SUN4I_HDMI_PLL_CTRL_CS(7) |
-		SUN4I_HDMI_PLL_CTRL_CP_S(15) | SUN4I_HDMI_PLL_CTRL_S(7) |
-		SUN4I_HDMI_PLL_CTRL_VCO_GAIN(4) | SUN4I_HDMI_PLL_CTRL_SDIV2 |
-		SUN4I_HDMI_PLL_CTRL_LDO2_EN | SUN4I_HDMI_PLL_CTRL_LDO1_EN |
-		SUN4I_HDMI_PLL_CTRL_HV_IS_33 | SUN4I_HDMI_PLL_CTRL_BWS |
-		SUN4I_HDMI_PLL_CTRL_PLL_EN;
+	reg |= hdmi->variant->pll_ctrl_init_val;
 	writel(reg, hdmi->base + SUN4I_HDMI_PLL_CTRL_REG);
 
 	ret = sun4i_hdmi_i2c_create(dev, hdmi);
 	if (ret) {
 		dev_err(dev, "Couldn't create the HDMI I2C adapter\n");
-		return ret;
+		goto err_disable_mod_clk;
 	}
 
 	drm_encoder_helper_add(&hdmi->encoder,
@@ -422,6 +567,12 @@ err_cleanup_connector:
 	drm_encoder_cleanup(&hdmi->encoder);
 err_del_i2c_adapter:
 	i2c_del_adapter(hdmi->i2c);
+err_disable_mod_clk:
+	clk_disable_unprepare(hdmi->mod_clk);
+err_disable_bus_clk:
+	clk_disable_unprepare(hdmi->bus_clk);
+err_assert_reset:
+	reset_control_assert(hdmi->reset);
 	return ret;
 }
 
@@ -434,6 +585,8 @@ static void sun4i_hdmi_unbind(struct device *dev, struct device *master,
 	drm_connector_cleanup(&hdmi->connector);
 	drm_encoder_cleanup(&hdmi->encoder);
 	i2c_del_adapter(hdmi->i2c);
+	clk_disable_unprepare(hdmi->mod_clk);
+	clk_disable_unprepare(hdmi->bus_clk);
 }
 
 static const struct component_ops sun4i_hdmi_ops = {
@@ -454,7 +607,8 @@ static int sun4i_hdmi_remove(struct platform_device *pdev)
 }
 
 static const struct of_device_id sun4i_hdmi_of_table[] = {
-	{ .compatible = "allwinner,sun5i-a10s-hdmi" },
+	{ .compatible = "allwinner,sun5i-a10s-hdmi", .data = &sun5i_variant, },
+	{ .compatible = "allwinner,sun6i-a31-hdmi", .data = &sun6i_variant, },
 	{ }
 };
 MODULE_DEVICE_TABLE(of, sun4i_hdmi_of_table);

drivers/gpu/drm/sun4i/sun4i_hdmi_i2c.c

@@ -25,8 +25,6 @@
 
 /* FIFO request bit is set when FIFO level is above RX_THRESHOLD during read */
 #define RX_THRESHOLD SUN4I_HDMI_DDC_FIFO_CTRL_RX_THRES_MAX
-/* FIFO request bit is set when FIFO level is below TX_THRESHOLD during write */
-#define TX_THRESHOLD 1
 
 static int fifo_transfer(struct sun4i_hdmi *hdmi, u8 *buf, int len, bool read)
 {
@@ -39,27 +37,36 @@ static int fifo_transfer(struct sun4i_hdmi *hdmi, u8 *buf, int len, bool read)
 			 SUN4I_HDMI_DDC_INT_STATUS_FIFO_REQUEST |
 			 SUN4I_HDMI_DDC_INT_STATUS_TRANSFER_COMPLETE;
 	u32 reg;
+	/*
+	 * If threshold is inclusive, then the FIFO may only have
+	 * RX_THRESHOLD number of bytes, instead of RX_THRESHOLD + 1.
+	 */
+	int read_len = RX_THRESHOLD +
+		(hdmi->variant->ddc_fifo_thres_incl ? 0 : 1);
 
-	/* Limit transfer length by FIFO threshold */
-	len = min_t(int, len, read ? (RX_THRESHOLD + 1) :
-			      (SUN4I_HDMI_DDC_FIFO_SIZE - TX_THRESHOLD + 1));
+	/*
+	 * Limit transfer length by FIFO threshold or FIFO size.
+	 * For TX the threshold is for an empty FIFO.
+	 */
+	len = min_t(int, len, read ? read_len : SUN4I_HDMI_DDC_FIFO_SIZE);
 
 	/* Wait until error, FIFO request bit set or transfer complete */
-	if (readl_poll_timeout(hdmi->base + SUN4I_HDMI_DDC_INT_STATUS_REG, reg,
-			       reg & mask, len * byte_time_ns, 100000))
+	if (regmap_field_read_poll_timeout(hdmi->field_ddc_int_status, reg,
+					   reg & mask, len * byte_time_ns,
+					   100000))
 		return -ETIMEDOUT;
 
 	if (reg & SUN4I_HDMI_DDC_INT_STATUS_ERROR_MASK)
 		return -EIO;
 
 	if (read)
-		readsb(hdmi->base + SUN4I_HDMI_DDC_FIFO_DATA_REG, buf, len);
+		readsb(hdmi->base + hdmi->variant->ddc_fifo_reg, buf, len);
 	else
-		writesb(hdmi->base + SUN4I_HDMI_DDC_FIFO_DATA_REG, buf, len);
+		writesb(hdmi->base + hdmi->variant->ddc_fifo_reg, buf, len);
 
-	/* Clear FIFO request bit */
-	writel(SUN4I_HDMI_DDC_INT_STATUS_FIFO_REQUEST,
-	       hdmi->base + SUN4I_HDMI_DDC_INT_STATUS_REG);
+	/* Clear FIFO request bit by forcing a write to that bit */
+	regmap_field_force_write(hdmi->field_ddc_int_status,
+				 SUN4I_HDMI_DDC_INT_STATUS_FIFO_REQUEST);
 
 	return len;
 }
@@ -70,50 +77,52 @@ static int xfer_msg(struct sun4i_hdmi *hdmi, struct i2c_msg *msg)
 	u32 reg;
 
 	/* Set FIFO direction */
-	reg = readl(hdmi->base + SUN4I_HDMI_DDC_CTRL_REG);
-	reg &= ~SUN4I_HDMI_DDC_CTRL_FIFO_DIR_MASK;
-	reg |= (msg->flags & I2C_M_RD) ?
-	       SUN4I_HDMI_DDC_CTRL_FIFO_DIR_READ :
-	       SUN4I_HDMI_DDC_CTRL_FIFO_DIR_WRITE;
-	writel(reg, hdmi->base + SUN4I_HDMI_DDC_CTRL_REG);
+	if (hdmi->variant->ddc_fifo_has_dir) {
+		reg = readl(hdmi->base + SUN4I_HDMI_DDC_CTRL_REG);
+		reg &= ~SUN4I_HDMI_DDC_CTRL_FIFO_DIR_MASK;
+		reg |= (msg->flags & I2C_M_RD) ?
+		       SUN4I_HDMI_DDC_CTRL_FIFO_DIR_READ :
+		       SUN4I_HDMI_DDC_CTRL_FIFO_DIR_WRITE;
+		writel(reg, hdmi->base + SUN4I_HDMI_DDC_CTRL_REG);
+	}
+
+	/* Clear address register (not cleared by soft reset) */
+	regmap_field_write(hdmi->field_ddc_addr_reg, 0);
 
 	/* Set I2C address */
-	writel(SUN4I_HDMI_DDC_ADDR_SLAVE(msg->addr),
-	       hdmi->base + SUN4I_HDMI_DDC_ADDR_REG);
-
-	/* Set FIFO RX/TX thresholds and clear FIFO */
-	reg = readl(hdmi->base + SUN4I_HDMI_DDC_FIFO_CTRL_REG);
-	reg |= SUN4I_HDMI_DDC_FIFO_CTRL_CLEAR;
-	reg &= ~SUN4I_HDMI_DDC_FIFO_CTRL_RX_THRES_MASK;
-	reg |= SUN4I_HDMI_DDC_FIFO_CTRL_RX_THRES(RX_THRESHOLD);
-	reg &= ~SUN4I_HDMI_DDC_FIFO_CTRL_TX_THRES_MASK;
-	reg |= SUN4I_HDMI_DDC_FIFO_CTRL_TX_THRES(TX_THRESHOLD);
-	writel(reg, hdmi->base + SUN4I_HDMI_DDC_FIFO_CTRL_REG);
-	if (readl_poll_timeout(hdmi->base + SUN4I_HDMI_DDC_FIFO_CTRL_REG,
-			       reg,
-			       !(reg & SUN4I_HDMI_DDC_FIFO_CTRL_CLEAR),
-			       100, 2000))
+	regmap_field_write(hdmi->field_ddc_slave_addr, msg->addr);
+
+	/*
+	 * Set FIFO RX/TX thresholds and clear FIFO
+	 *
+	 * If threshold is inclusive, we can set the TX threshold to
+	 * 0 instead of 1.
+	 */
+	regmap_field_write(hdmi->field_ddc_fifo_tx_thres,
+			   hdmi->variant->ddc_fifo_thres_incl ? 0 : 1);
+	regmap_field_write(hdmi->field_ddc_fifo_rx_thres, RX_THRESHOLD);
+	regmap_field_write(hdmi->field_ddc_fifo_clear, 1);
+	if (regmap_field_read_poll_timeout(hdmi->field_ddc_fifo_clear,
+					   reg, !reg, 100, 2000))
 		return -EIO;
 
 	/* Set transfer length */
-	writel(msg->len, hdmi->base + SUN4I_HDMI_DDC_BYTE_COUNT_REG);
+	regmap_field_write(hdmi->field_ddc_byte_count, msg->len);
 
 	/* Set command */
-	writel(msg->flags & I2C_M_RD ?
-	       SUN4I_HDMI_DDC_CMD_IMPLICIT_READ :
-	       SUN4I_HDMI_DDC_CMD_IMPLICIT_WRITE,
-	       hdmi->base + SUN4I_HDMI_DDC_CMD_REG);
+	regmap_field_write(hdmi->field_ddc_cmd,
+			   msg->flags & I2C_M_RD ?
+			   SUN4I_HDMI_DDC_CMD_IMPLICIT_READ :
+			   SUN4I_HDMI_DDC_CMD_IMPLICIT_WRITE);
 
-	/* Clear interrupt status bits */
-	writel(SUN4I_HDMI_DDC_INT_STATUS_ERROR_MASK |
-	       SUN4I_HDMI_DDC_INT_STATUS_FIFO_REQUEST |
-	       SUN4I_HDMI_DDC_INT_STATUS_TRANSFER_COMPLETE,
-	       hdmi->base + SUN4I_HDMI_DDC_INT_STATUS_REG);
+	/* Clear interrupt status bits by forcing a write */
+	regmap_field_force_write(hdmi->field_ddc_int_status,
+				 SUN4I_HDMI_DDC_INT_STATUS_ERROR_MASK |
+				 SUN4I_HDMI_DDC_INT_STATUS_FIFO_REQUEST |
+				 SUN4I_HDMI_DDC_INT_STATUS_TRANSFER_COMPLETE);
 
 	/* Start command */
-	reg = readl(hdmi->base + SUN4I_HDMI_DDC_CTRL_REG);
-	writel(reg | SUN4I_HDMI_DDC_CTRL_START_CMD,
-	       hdmi->base + SUN4I_HDMI_DDC_CTRL_REG);
+	regmap_field_write(hdmi->field_ddc_start, 1);
 
 	/* Transfer bytes */
 	for (i = 0; i < msg->len; i += len) {
@@ -124,14 +133,12 @@ static int xfer_msg(struct sun4i_hdmi *hdmi, struct i2c_msg *msg)
 	}
 
 	/* Wait for command to finish */
-	if (readl_poll_timeout(hdmi->base + SUN4I_HDMI_DDC_CTRL_REG,
-			       reg,
-			       !(reg & SUN4I_HDMI_DDC_CTRL_START_CMD),
-			       100, 100000))
+	if (regmap_field_read_poll_timeout(hdmi->field_ddc_start,
+					   reg, !reg, 100, 100000))
 		return -EIO;
 
 	/* Check for errors */
-	reg = readl(hdmi->base + SUN4I_HDMI_DDC_INT_STATUS_REG);
+	regmap_field_read(hdmi->field_ddc_int_status, &reg);
 	if ((reg & SUN4I_HDMI_DDC_INT_STATUS_ERROR_MASK) ||
 	    !(reg & SUN4I_HDMI_DDC_INT_STATUS_TRANSFER_COMPLETE)) {
 		return -EIO;
@@ -154,20 +161,21 @@ static int sun4i_hdmi_i2c_xfer(struct i2c_adapter *adap,
 			return -EINVAL;
 	}
 
+	/* DDC clock needs to be enabled for the module to work */
+	clk_prepare_enable(hdmi->ddc_clk);
+	clk_set_rate(hdmi->ddc_clk, 100000);
+
 	/* Reset I2C controller */
-	writel(SUN4I_HDMI_DDC_CTRL_ENABLE | SUN4I_HDMI_DDC_CTRL_RESET,
-	       hdmi->base + SUN4I_HDMI_DDC_CTRL_REG);
-	if (readl_poll_timeout(hdmi->base + SUN4I_HDMI_DDC_CTRL_REG, reg,
-			       !(reg & SUN4I_HDMI_DDC_CTRL_RESET),
-			       100, 2000))
+	regmap_field_write(hdmi->field_ddc_en, 1);
+	regmap_field_write(hdmi->field_ddc_reset, 1);
+	if (regmap_field_read_poll_timeout(hdmi->field_ddc_reset,
+					   reg, !reg, 100, 2000)) {
+		clk_disable_unprepare(hdmi->ddc_clk);
 		return -EIO;
+	}
 
-	writel(SUN4I_HDMI_DDC_LINE_CTRL_SDA_ENABLE |
-	       SUN4I_HDMI_DDC_LINE_CTRL_SCL_ENABLE,
-	       hdmi->base + SUN4I_HDMI_DDC_LINE_CTRL_REG);
-
-	clk_prepare_enable(hdmi->ddc_clk);
-	clk_set_rate(hdmi->ddc_clk, 100000);
+	regmap_field_write(hdmi->field_ddc_sck_en, 1);
+	regmap_field_write(hdmi->field_ddc_sda_en, 1);
 
 	for (i = 0; i < num; i++) {
 		err = xfer_msg(hdmi, &msgs[i]);
@@ -191,12 +199,105 @@ static const struct i2c_algorithm sun4i_hdmi_i2c_algorithm = {
 	.functionality	= sun4i_hdmi_i2c_func,
 };
 
+static int sun4i_hdmi_init_regmap_fields(struct sun4i_hdmi *hdmi)
+{
+	hdmi->field_ddc_en =
+		devm_regmap_field_alloc(hdmi->dev, hdmi->regmap,
+					hdmi->variant->field_ddc_en);
+	if (IS_ERR(hdmi->field_ddc_en))
+		return PTR_ERR(hdmi->field_ddc_en);
+
+	hdmi->field_ddc_start =
+		devm_regmap_field_alloc(hdmi->dev, hdmi->regmap,
+					hdmi->variant->field_ddc_start);
+	if (IS_ERR(hdmi->field_ddc_start))
+		return PTR_ERR(hdmi->field_ddc_start);
+
+	hdmi->field_ddc_reset =
+		devm_regmap_field_alloc(hdmi->dev, hdmi->regmap,
+					hdmi->variant->field_ddc_reset);
+	if (IS_ERR(hdmi->field_ddc_reset))
+		return PTR_ERR(hdmi->field_ddc_reset);
+
+	hdmi->field_ddc_addr_reg =
+		devm_regmap_field_alloc(hdmi->dev, hdmi->regmap,
+					hdmi->variant->field_ddc_addr_reg);
+	if (IS_ERR(hdmi->field_ddc_addr_reg))
+		return PTR_ERR(hdmi->field_ddc_addr_reg);
+
+	hdmi->field_ddc_slave_addr =
+		devm_regmap_field_alloc(hdmi->dev, hdmi->regmap,
+					hdmi->variant->field_ddc_slave_addr);
+	if (IS_ERR(hdmi->field_ddc_slave_addr))
+		return PTR_ERR(hdmi->field_ddc_slave_addr);
+
+	hdmi->field_ddc_int_mask =
+		devm_regmap_field_alloc(hdmi->dev, hdmi->regmap,
+					hdmi->variant->field_ddc_int_mask);
+	if (IS_ERR(hdmi->field_ddc_int_mask))
+		return PTR_ERR(hdmi->field_ddc_int_mask);
+
+	hdmi->field_ddc_int_status =
+		devm_regmap_field_alloc(hdmi->dev, hdmi->regmap,
+					hdmi->variant->field_ddc_int_status);
+	if (IS_ERR(hdmi->field_ddc_int_status))
+		return PTR_ERR(hdmi->field_ddc_int_status);
+
+	hdmi->field_ddc_fifo_clear =
+		devm_regmap_field_alloc(hdmi->dev, hdmi->regmap,
+					hdmi->variant->field_ddc_fifo_clear);
+	if (IS_ERR(hdmi->field_ddc_fifo_clear))
+		return PTR_ERR(hdmi->field_ddc_fifo_clear);
+
+	hdmi->field_ddc_fifo_rx_thres =
+		devm_regmap_field_alloc(hdmi->dev, hdmi->regmap,
+					hdmi->variant->field_ddc_fifo_rx_thres);
+	if (IS_ERR(hdmi->field_ddc_fifo_rx_thres))
+		return PTR_ERR(hdmi->field_ddc_fifo_rx_thres);
+
+	hdmi->field_ddc_fifo_tx_thres =
+		devm_regmap_field_alloc(hdmi->dev, hdmi->regmap,
+					hdmi->variant->field_ddc_fifo_tx_thres);
+	if (IS_ERR(hdmi->field_ddc_fifo_tx_thres))
+		return PTR_ERR(hdmi->field_ddc_fifo_tx_thres);
+
+	hdmi->field_ddc_byte_count =
+		devm_regmap_field_alloc(hdmi->dev, hdmi->regmap,
+					hdmi->variant->field_ddc_byte_count);
+	if (IS_ERR(hdmi->field_ddc_byte_count))
+		return PTR_ERR(hdmi->field_ddc_byte_count);
+
+	hdmi->field_ddc_cmd =
+		devm_regmap_field_alloc(hdmi->dev, hdmi->regmap,
+					hdmi->variant->field_ddc_cmd);
+	if (IS_ERR(hdmi->field_ddc_cmd))
+		return PTR_ERR(hdmi->field_ddc_cmd);
+
+	hdmi->field_ddc_sda_en =
+		devm_regmap_field_alloc(hdmi->dev, hdmi->regmap,
+					hdmi->variant->field_ddc_sda_en);
+	if (IS_ERR(hdmi->field_ddc_sda_en))
+		return PTR_ERR(hdmi->field_ddc_sda_en);
+
+	hdmi->field_ddc_sck_en =
+		devm_regmap_field_alloc(hdmi->dev, hdmi->regmap,
+					hdmi->variant->field_ddc_sck_en);
+	if (IS_ERR(hdmi->field_ddc_sck_en))
+		return PTR_ERR(hdmi->field_ddc_sck_en);
+
+	return 0;
+}
+
 int sun4i_hdmi_i2c_create(struct device *dev, struct sun4i_hdmi *hdmi)
 {
 	struct i2c_adapter *adap;
 	int ret = 0;
 
-	ret = sun4i_ddc_create(hdmi, hdmi->tmds_clk);
+	ret = sun4i_ddc_create(hdmi, hdmi->ddc_parent_clk);
+	if (ret)
+		return ret;
+
+	ret = sun4i_hdmi_init_regmap_fields(hdmi);
 	if (ret)
 		return ret;
 

drivers/gpu/drm/sun4i/sun4i_hdmi_tmds_clk.c

@@ -18,6 +18,8 @@
 struct sun4i_tmds {
 	struct clk_hw		hw;
 	struct sun4i_hdmi	*hdmi;
+
+	u8			div_offset;
 };
 
 static inline struct sun4i_tmds *hw_to_tmds(struct clk_hw *hw)
@@ -28,6 +30,7 @@ static inline struct sun4i_tmds *hw_to_tmds(struct clk_hw *hw)
 
 static unsigned long sun4i_tmds_calc_divider(unsigned long rate,
 					     unsigned long parent_rate,
+					     u8 div_offset,
 					     u8 *div,
 					     bool *half)
 {
@@ -35,7 +38,7 @@ static unsigned long sun4i_tmds_calc_divider(unsigned long rate,
 	u8 best_m = 0, m;
 	bool is_double;
 
-	for (m = 1; m < 16; m++) {
+	for (m = div_offset ?: 1; m < (16 + div_offset); m++) {
 		u8 d;
 
 		for (d = 1; d < 3; d++) {
@@ -67,11 +70,12 @@ static unsigned long sun4i_tmds_calc_divider(unsigned long rate,
 static int sun4i_tmds_determine_rate(struct clk_hw *hw,
 				     struct clk_rate_request *req)
 {
-	struct clk_hw *parent;
+	struct sun4i_tmds *tmds = hw_to_tmds(hw);
+	struct clk_hw *parent = NULL;
 	unsigned long best_parent = 0;
 	unsigned long rate = req->rate;
 	int best_div = 1, best_half = 1;
-	int i, j;
+	int i, j, p;
 
 	/*
 	 * We only consider PLL3, since the TCON is very likely to be
@@ -79,32 +83,38 @@ static int sun4i_tmds_determine_rate(struct clk_hw *hw,
 	 * clock, so we should not need to do anything.
 	 */
 
-	parent = clk_hw_get_parent_by_index(hw, 0);
-	if (!parent)
-		return -EINVAL;
-
-	for (i = 1; i < 3; i++) {
-		for (j = 1; j < 16; j++) {
-			unsigned long ideal = rate * i * j;
-			unsigned long rounded;
-
-			rounded = clk_hw_round_rate(parent, ideal);
-
-			if (rounded == ideal) {
-				best_parent = rounded;
-				best_half = i;
-				best_div = j;
-				goto out;
-			}
-
-			if (abs(rate - rounded / i) <
-			    abs(rate - best_parent / best_div)) {
-				best_parent = rounded;
-				best_div = i;
+	for (p = 0; p < clk_hw_get_num_parents(hw); p++) {
+		parent = clk_hw_get_parent_by_index(hw, p);
+		if (!parent)
+			continue;
+
+		for (i = 1; i < 3; i++) {
+			for (j = tmds->div_offset ?: 1;
+			     j < (16 + tmds->div_offset); j++) {
+				unsigned long ideal = rate * i * j;
+				unsigned long rounded;
+
+				rounded = clk_hw_round_rate(parent, ideal);
+
+				if (rounded == ideal) {
+					best_parent = rounded;
+					best_half = i;
+					best_div = j;
+					goto out;
+				}
+
+				if (abs(rate - rounded / i) <
+				    abs(rate - best_parent / best_div)) {
+					best_parent = rounded;
+					best_div = i;
+				}
 			}
 		}
 	}
 
+	if (!parent)
+		return -EINVAL;
+
 out:
 	req->rate = best_parent / best_half / best_div;
 	req->best_parent_rate = best_parent;
@@ -124,7 +134,7 @@ static unsigned long sun4i_tmds_recalc_rate(struct clk_hw *hw,
 		parent_rate /= 2;
 
 	reg = readl(tmds->hdmi->base + SUN4I_HDMI_PLL_CTRL_REG);
-	reg = (reg >> 4) & 0xf;
+	reg = ((reg >> 4) & 0xf) + tmds->div_offset;
 	if (!reg)
 		reg = 1;
 
@@ -139,7 +149,8 @@ static int sun4i_tmds_set_rate(struct clk_hw *hw, unsigned long rate,
 	u32 reg;
 	u8 div;
 
-	sun4i_tmds_calc_divider(rate, parent_rate, &div, &half);
+	sun4i_tmds_calc_divider(rate, parent_rate, tmds->div_offset,
+				&div, &half);
 
 	reg = readl(tmds->hdmi->base + SUN4I_HDMI_PAD_CTRL1_REG);
 	reg &= ~SUN4I_HDMI_PAD_CTRL1_HALVE_CLK;
@@ -149,7 +160,7 @@ static int sun4i_tmds_set_rate(struct clk_hw *hw, unsigned long rate,
 
 	reg = readl(tmds->hdmi->base + SUN4I_HDMI_PLL_CTRL_REG);
 	reg &= ~SUN4I_HDMI_PLL_CTRL_DIV_MASK;
-	writel(reg | SUN4I_HDMI_PLL_CTRL_DIV(div),
+	writel(reg | SUN4I_HDMI_PLL_CTRL_DIV(div - tmds->div_offset),
 	       tmds->hdmi->base + SUN4I_HDMI_PLL_CTRL_REG);
 
 	return 0;
@@ -216,6 +227,7 @@ int sun4i_tmds_create(struct sun4i_hdmi *hdmi)
 
 	tmds->hdmi = hdmi;
 	tmds->hw.init = &init;
+	tmds->div_offset = hdmi->variant->tmds_clk_div_offset;
 
 	hdmi->tmds_clk = devm_clk_register(hdmi->dev, &tmds->hw);
 	if (IS_ERR(hdmi->tmds_clk))

drivers/gpu/drm/sun4i/sun4i_tcon.c

@@ -14,9 +14,12 @@
 #include <drm/drm_atomic_helper.h>
 #include <drm/drm_crtc.h>
 #include <drm/drm_crtc_helper.h>
+#include <drm/drm_encoder.h>
 #include <drm/drm_modes.h>
 #include <drm/drm_of.h>
 
+#include <uapi/drm/drm_mode.h>
+
 #include <linux/component.h>
 #include <linux/ioport.h>
 #include <linux/of_address.h>
@@ -109,26 +112,37 @@ void sun4i_tcon_enable_vblank(struct sun4i_tcon *tcon, bool enable)
 }
 EXPORT_SYMBOL(sun4i_tcon_enable_vblank);
 
-void sun4i_tcon_set_mux(struct sun4i_tcon *tcon, int channel,
-			struct drm_encoder *encoder)
+/*
+ * This function is a helper for TCON output muxing. The TCON output
+ * muxing control register in earlier SoCs (without the TCON TOP block)
+ * are located in TCON0. This helper returns a pointer to TCON0's
+ * sun4i_tcon structure, or NULL if not found.
+ */
+static struct sun4i_tcon *sun4i_get_tcon0(struct drm_device *drm)
 {
-	u32 val;
+	struct sun4i_drv *drv = drm->dev_private;
+	struct sun4i_tcon *tcon;
 
-	if (!tcon->quirks->has_unknown_mux)
-		return;
+	list_for_each_entry(tcon, &drv->tcon_list, list)
+		if (tcon->id == 0)
+			return tcon;
 
-	if (channel != 1)
-		return;
+	dev_warn(drm->dev,
+		 "TCON0 not found, display output muxing may not work\n");
 
-	if (encoder->encoder_type == DRM_MODE_ENCODER_TVDAC)
-		val = 1;
-	else
-		val = 0;
+	return NULL;
+}
 
-	/*
-	 * FIXME: Undocumented bits
-	 */
-	regmap_write(tcon->regs, SUN4I_TCON_MUX_CTRL_REG, val);
+void sun4i_tcon_set_mux(struct sun4i_tcon *tcon, int channel,
+			struct drm_encoder *encoder)
+{
+	int ret = -ENOTSUPP;
+
+	if (tcon->quirks->set_mux)
+		ret = tcon->quirks->set_mux(tcon, encoder);
+
+	DRM_DEBUG_DRIVER("Muxing encoder %s to CRTC %s: %d\n",
+			 encoder->name, encoder->crtc->name, ret);
 }
 EXPORT_SYMBOL(sun4i_tcon_set_mux);
 
@@ -767,14 +781,57 @@ static int sun4i_tcon_remove(struct platform_device *pdev)
 	return 0;
 }
 
+/* platform specific TCON muxing callbacks */
+static int sun5i_a13_tcon_set_mux(struct sun4i_tcon *tcon,
+				  struct drm_encoder *encoder)
+{
+	u32 val;
+
+	if (encoder->encoder_type == DRM_MODE_ENCODER_TVDAC)
+		val = 1;
+	else
+		val = 0;
+
+	/*
+	 * FIXME: Undocumented bits
+	 */
+	return regmap_write(tcon->regs, SUN4I_TCON_MUX_CTRL_REG, val);
+}
+
+static int sun6i_tcon_set_mux(struct sun4i_tcon *tcon,
+			      struct drm_encoder *encoder)
+{
+	struct sun4i_tcon *tcon0 = sun4i_get_tcon0(encoder->dev);
+	u32 shift;
+
+	if (!tcon0)
+		return -EINVAL;
+
+	switch (encoder->encoder_type) {
+	case DRM_MODE_ENCODER_TMDS:
+		/* HDMI */
+		shift = 8;
+		break;
+	default:
+		/* TODO A31 has MIPI DSI but A31s does not */
+		return -EINVAL;
+	}
+
+	regmap_update_bits(tcon0->regs, SUN4I_TCON_MUX_CTRL_REG,
+			   0x3 << shift, tcon->id << shift);
+
+	return 0;
+}
+
 static const struct sun4i_tcon_quirks sun5i_a13_quirks = {
-	.has_unknown_mux = true,
-	.has_channel_1	= true,
+	.has_channel_1		= true,
+	.set_mux		= sun5i_a13_tcon_set_mux,
 };
 
 static const struct sun4i_tcon_quirks sun6i_a31_quirks = {
 	.has_channel_1		= true,
 	.needs_de_be_mux	= true,
+	.set_mux		= sun6i_tcon_set_mux,
 };
 
 static const struct sun4i_tcon_quirks sun6i_a31s_quirks = {

drivers/gpu/drm/sun4i/sun4i_tcon.h

@@ -145,10 +145,14 @@
 
 #define SUN4I_TCON_MAX_CHANNELS		2
 
+struct sun4i_tcon;
+
 struct sun4i_tcon_quirks {
-	bool	has_unknown_mux; /* sun5i has undocumented mux */
 	bool	has_channel_1;	/* a33 does not have channel 1 */
 	bool	needs_de_be_mux; /* sun6i needs mux to select backend */
+
+	/* callback to handle tcon muxing options */
+	int	(*set_mux)(struct sun4i_tcon *, struct drm_encoder *);
 };
 
 struct sun4i_tcon {

drivers/gpu/drm/vc4/vc4_dpi.c

@@ -97,8 +97,6 @@ struct vc4_dpi {
 
 	struct drm_encoder *encoder;
 	struct drm_connector *connector;
-	struct drm_bridge *bridge;
-	bool is_panel_bridge;
 
 	void __iomem *regs;
 
@@ -251,10 +249,11 @@ static int vc4_dpi_init_bridge(struct vc4_dpi *dpi)
 {
 	struct device *dev = &dpi->pdev->dev;
 	struct drm_panel *panel;
+	struct drm_bridge *bridge;
 	int ret;
 
 	ret = drm_of_find_panel_or_bridge(dev->of_node, 0, 0,
-					  &panel, &dpi->bridge);
+					  &panel, &bridge);
 	if (ret) {
 		/* If nothing was connected in the DT, that's not an
 		 * error.
@@ -265,13 +264,10 @@ static int vc4_dpi_init_bridge(struct vc4_dpi *dpi)
 			return ret;
 	}
 
-	if (panel) {
-		dpi->bridge = drm_panel_bridge_add(panel,
-						   DRM_MODE_CONNECTOR_DPI);
-		dpi->is_panel_bridge = true;
-	}
+	if (panel)
+		bridge = drm_panel_bridge_add(panel, DRM_MODE_CONNECTOR_DPI);
 
-	return drm_bridge_attach(dpi->encoder, dpi->bridge, NULL);
+	return drm_bridge_attach(dpi->encoder, bridge, NULL);
 }
 
 static int vc4_dpi_bind(struct device *dev, struct device *master, void *data)
@@ -352,8 +348,7 @@ static void vc4_dpi_unbind(struct device *dev, struct device *master,
 	struct vc4_dev *vc4 = to_vc4_dev(drm);
 	struct vc4_dpi *dpi = dev_get_drvdata(dev);
 
-	if (dpi->is_panel_bridge)
-		drm_panel_bridge_remove(dpi->bridge);
+	drm_of_panel_bridge_remove(dev->of_node, 0, 0);
 
 	drm_encoder_cleanup(dpi->encoder);
 

include/drm/bridge/mhl.h

@@ -262,6 +262,10 @@ enum {
 #define MHL_RAPK_UNSUPPORTED	0x02	/* Rcvd RAP action code not supported */
 #define MHL_RAPK_BUSY		0x03	/* Responder too busy to respond */
 
+/* Bit masks for RCP messages */
+#define MHL_RCP_KEY_RELEASED_MASK	0x80
+#define MHL_RCP_KEY_ID_MASK		0x7F
+
 /*
  * Error status codes for RCPE messages
  */

include/drm/drm_atomic.h

@@ -585,12 +585,12 @@ void drm_state_dump(struct drm_device *dev, struct drm_printer *p);
  */
 #define for_each_oldnew_connector_in_state(__state, connector, old_connector_state, new_connector_state, __i) \
 	for ((__i) = 0;								\
-	     (__i) < (__state)->num_connector &&				\
-	     ((connector) = (__state)->connectors[__i].ptr,			\
-	     (old_connector_state) = (__state)->connectors[__i].old_state,	\
-	     (new_connector_state) = (__state)->connectors[__i].new_state, 1); 	\
-	     (__i)++)							\
-		for_each_if (connector)
+	     (__i) < (__state)->num_connector;					\
+	     (__i)++)								\
+		for_each_if ((__state)->connectors[__i].ptr &&			\
+			     ((connector) = (__state)->connectors[__i].ptr,	\
+			     (old_connector_state) = (__state)->connectors[__i].old_state,	\
+			     (new_connector_state) = (__state)->connectors[__i].new_state, 1))
 
 /**
  * for_each_old_connector_in_state - iterate over all connectors in an atomic update
@@ -606,11 +606,11 @@ void drm_state_dump(struct drm_device *dev, struct drm_printer *p);
  */
 #define for_each_old_connector_in_state(__state, connector, old_connector_state, __i) \
 	for ((__i) = 0;								\
-	     (__i) < (__state)->num_connector &&				\
-	     ((connector) = (__state)->connectors[__i].ptr,			\
-	     (old_connector_state) = (__state)->connectors[__i].old_state, 1); 	\
-	     (__i)++)							\
-		for_each_if (connector)
+	     (__i) < (__state)->num_connector;					\
+	     (__i)++)								\
+		for_each_if ((__state)->connectors[__i].ptr &&			\
+			     ((connector) = (__state)->connectors[__i].ptr,	\
+			     (old_connector_state) = (__state)->connectors[__i].old_state, 1))
 
 /**
  * for_each_new_connector_in_state - iterate over all connectors in an atomic update
@@ -626,11 +626,11 @@ void drm_state_dump(struct drm_device *dev, struct drm_printer *p);
  */
 #define for_each_new_connector_in_state(__state, connector, new_connector_state, __i) \
 	for ((__i) = 0;								\
-	     (__i) < (__state)->num_connector &&				\
-	     ((connector) = (__state)->connectors[__i].ptr,			\
-	     (new_connector_state) = (__state)->connectors[__i].new_state, 1); 	\
-	     (__i)++)							\
-		for_each_if (connector)
+	     (__i) < (__state)->num_connector;					\
+	     (__i)++)								\
+		for_each_if ((__state)->connectors[__i].ptr &&			\
+			     ((connector) = (__state)->connectors[__i].ptr,	\
+			     (new_connector_state) = (__state)->connectors[__i].new_state, 1))
 
 /**
  * for_each_oldnew_crtc_in_state - iterate over all CRTCs in an atomic update
@@ -646,12 +646,12 @@ void drm_state_dump(struct drm_device *dev, struct drm_printer *p);
  */
 #define for_each_oldnew_crtc_in_state(__state, crtc, old_crtc_state, new_crtc_state, __i) \
 	for ((__i) = 0;							\
-	     (__i) < (__state)->dev->mode_config.num_crtc &&		\
-	     ((crtc) = (__state)->crtcs[__i].ptr,			\
-	     (old_crtc_state) = (__state)->crtcs[__i].old_state,	\
-	     (new_crtc_state) = (__state)->crtcs[__i].new_state, 1);	\
+	     (__i) < (__state)->dev->mode_config.num_crtc;		\
 	     (__i)++)							\
-		for_each_if (crtc)
+		for_each_if ((__state)->crtcs[__i].ptr &&		\
+			     ((crtc) = (__state)->crtcs[__i].ptr,	\
+			     (old_crtc_state) = (__state)->crtcs[__i].old_state, \
+			     (new_crtc_state) = (__state)->crtcs[__i].new_state, 1))
 
 /**
  * for_each_old_crtc_in_state - iterate over all CRTCs in an atomic update
@@ -666,11 +666,11 @@ void drm_state_dump(struct drm_device *dev, struct drm_printer *p);
  */
 #define for_each_old_crtc_in_state(__state, crtc, old_crtc_state, __i)	\
 	for ((__i) = 0;							\
-	     (__i) < (__state)->dev->mode_config.num_crtc &&		\
-	     ((crtc) = (__state)->crtcs[__i].ptr,			\
-	     (old_crtc_state) = (__state)->crtcs[__i].old_state, 1);	\
+	     (__i) < (__state)->dev->mode_config.num_crtc;		\
 	     (__i)++)							\
-		for_each_if (crtc)
+		for_each_if ((__state)->crtcs[__i].ptr &&		\
+			     ((crtc) = (__state)->crtcs[__i].ptr,	\
+			     (old_crtc_state) = (__state)->crtcs[__i].old_state, 1))
 
 /**
  * for_each_new_crtc_in_state - iterate over all CRTCs in an atomic update
@@ -685,11 +685,11 @@ void drm_state_dump(struct drm_device *dev, struct drm_printer *p);
  */
 #define for_each_new_crtc_in_state(__state, crtc, new_crtc_state, __i)	\
 	for ((__i) = 0;							\
-	     (__i) < (__state)->dev->mode_config.num_crtc &&		\
-	     ((crtc) = (__state)->crtcs[__i].ptr,			\
-	     (new_crtc_state) = (__state)->crtcs[__i].new_state, 1);	\
+	     (__i) < (__state)->dev->mode_config.num_crtc;		\
 	     (__i)++)							\
-		for_each_if (crtc)
+		for_each_if ((__state)->crtcs[__i].ptr &&		\
+			     ((crtc) = (__state)->crtcs[__i].ptr,	\
+			     (new_crtc_state) = (__state)->crtcs[__i].new_state, 1))
 
 /**
  * for_each_oldnew_plane_in_state - iterate over all planes in an atomic update
@@ -705,12 +705,12 @@ void drm_state_dump(struct drm_device *dev, struct drm_printer *p);
  */
 #define for_each_oldnew_plane_in_state(__state, plane, old_plane_state, new_plane_state, __i) \
 	for ((__i) = 0;							\
-	     (__i) < (__state)->dev->mode_config.num_total_plane &&	\
-	     ((plane) = (__state)->planes[__i].ptr,			\
-	     (old_plane_state) = (__state)->planes[__i].old_state,	\
-	     (new_plane_state) = (__state)->planes[__i].new_state, 1);	\
+	     (__i) < (__state)->dev->mode_config.num_total_plane;	\
 	     (__i)++)							\
-		for_each_if (plane)
+		for_each_if ((__state)->planes[__i].ptr &&		\
+			     ((plane) = (__state)->planes[__i].ptr,	\
+			      (old_plane_state) = (__state)->planes[__i].old_state,\
+			      (new_plane_state) = (__state)->planes[__i].new_state, 1))
 
 /**
  * for_each_old_plane_in_state - iterate over all planes in an atomic update
@@ -725,12 +725,11 @@ void drm_state_dump(struct drm_device *dev, struct drm_printer *p);
  */
 #define for_each_old_plane_in_state(__state, plane, old_plane_state, __i) \
 	for ((__i) = 0;							\
-	     (__i) < (__state)->dev->mode_config.num_total_plane &&	\
-	     ((plane) = (__state)->planes[__i].ptr,			\
-	     (old_plane_state) = (__state)->planes[__i].old_state, 1);	\
+	     (__i) < (__state)->dev->mode_config.num_total_plane;	\
 	     (__i)++)							\
-		for_each_if (plane)
-
+		for_each_if ((__state)->planes[__i].ptr &&		\
+			     ((plane) = (__state)->planes[__i].ptr,	\
+			      (old_plane_state) = (__state)->planes[__i].old_state, 1))
 /**
  * for_each_new_plane_in_state - iterate over all planes in an atomic update
  * @__state: &struct drm_atomic_state pointer
@@ -744,11 +743,11 @@ void drm_state_dump(struct drm_device *dev, struct drm_printer *p);
  */
 #define for_each_new_plane_in_state(__state, plane, new_plane_state, __i) \
 	for ((__i) = 0;							\
-	     (__i) < (__state)->dev->mode_config.num_total_plane &&	\
-	     ((plane) = (__state)->planes[__i].ptr,			\
-	     (new_plane_state) = (__state)->planes[__i].new_state, 1);	\
+	     (__i) < (__state)->dev->mode_config.num_total_plane;	\
 	     (__i)++)							\
-		for_each_if (plane)
+		for_each_if ((__state)->planes[__i].ptr &&		\
+			     ((plane) = (__state)->planes[__i].ptr,	\
+			      (new_plane_state) = (__state)->planes[__i].new_state, 1))
 
 /**
  * for_each_oldnew_private_obj_in_state - iterate over all private objects in an atomic update
@@ -768,8 +767,7 @@ void drm_state_dump(struct drm_device *dev, struct drm_printer *p);
 		     ((obj) = (__state)->private_objs[__i].ptr, \
 		      (old_obj_state) = (__state)->private_objs[__i].old_state,	\
 		      (new_obj_state) = (__state)->private_objs[__i].new_state, 1); \
-	     (__i)++) \
-		for_each_if (obj)
+	     (__i)++)
 
 /**
  * for_each_old_private_obj_in_state - iterate over all private objects in an atomic update
@@ -787,8 +785,7 @@ void drm_state_dump(struct drm_device *dev, struct drm_printer *p);
 	     (__i) < (__state)->num_private_objs && \
 		     ((obj) = (__state)->private_objs[__i].ptr, \
 		      (old_obj_state) = (__state)->private_objs[__i].old_state, 1); \
-	     (__i)++) \
-		for_each_if (obj)
+	     (__i)++)
 
 /**
  * for_each_new_private_obj_in_state - iterate over all private objects in an atomic update
@@ -806,8 +803,7 @@ void drm_state_dump(struct drm_device *dev, struct drm_printer *p);
 	     (__i) < (__state)->num_private_objs && \
 		     ((obj) = (__state)->private_objs[__i].ptr, \
 		      (new_obj_state) = (__state)->private_objs[__i].new_state, 1); \
-	     (__i)++) \
-		for_each_if (obj)
+	     (__i)++)
 
 /**
  * drm_atomic_crtc_needs_modeset - compute combined modeset need

include/drm/drm_of.h

@@ -29,6 +29,8 @@ int drm_of_find_panel_or_bridge(const struct device_node *np,
 				int port, int endpoint,
 				struct drm_panel **panel,
 				struct drm_bridge **bridge);
+int drm_of_panel_bridge_remove(const struct device_node *np,
+			       int port, int endpoint);
 #else
 static inline uint32_t drm_of_find_possible_crtcs(struct drm_device *dev,
 						  struct device_node *port)
@@ -65,6 +67,12 @@ static inline int drm_of_find_panel_or_bridge(const struct device_node *np,
 {
 	return -EINVAL;
 }
+
+static inline int drm_of_panel_bridge_remove(const struct device_node *np,
+					     int port, int endpoint)
+{
+	return -EINVAL;
+}
 #endif
 
 static inline int drm_of_encoder_active_endpoint_id(struct device_node *node,

include/linux/dma-fence.h

@@ -248,9 +248,12 @@ dma_fence_get_rcu_safe(struct dma_fence * __rcu *fencep)
 		struct dma_fence *fence;
 
 		fence = rcu_dereference(*fencep);
-		if (!fence || !dma_fence_get_rcu(fence))
+		if (!fence)
 			return NULL;
 
+		if (!dma_fence_get_rcu(fence))
+			continue;
+
 		/* The atomic_inc_not_zero() inside dma_fence_get_rcu()
 		 * provides a full memory barrier upon success (such as now).
 		 * This is paired with the write barrier from assigning

include/linux/regmap.h

@@ -139,6 +139,45 @@ struct reg_sequence {
 	pollret ?: ((cond) ? 0 : -ETIMEDOUT); \
 })
 
+/**
+ * regmap_field_read_poll_timeout - Poll until a condition is met or timeout
+ *
+ * @field: Regmap field to read from
+ * @val: Unsigned integer variable to read the value into
+ * @cond: Break condition (usually involving @val)
+ * @sleep_us: Maximum time to sleep between reads in us (0
+ *            tight-loops).  Should be less than ~20ms since usleep_range
+ *            is used (see Documentation/timers/timers-howto.txt).
+ * @timeout_us: Timeout in us, 0 means never timeout
+ *
+ * Returns 0 on success and -ETIMEDOUT upon a timeout or the regmap_field_read
+ * error return value in case of a error read. In the two former cases,
+ * the last read value at @addr is stored in @val. Must not be called
+ * from atomic context if sleep_us or timeout_us are used.
+ *
+ * This is modelled after the readx_poll_timeout macros in linux/iopoll.h.
+ */
+#define regmap_field_read_poll_timeout(field, val, cond, sleep_us, timeout_us) \
+({ \
+	ktime_t timeout = ktime_add_us(ktime_get(), timeout_us); \
+	int pollret; \
+	might_sleep_if(sleep_us); \
+	for (;;) { \
+		pollret = regmap_field_read((field), &(val)); \
+		if (pollret) \
+			break; \
+		if (cond) \
+			break; \
+		if (timeout_us && ktime_compare(ktime_get(), timeout) > 0) { \
+			pollret = regmap_field_read((field), &(val)); \
+			break; \
+		} \
+		if (sleep_us) \
+			usleep_range((sleep_us >> 2) + 1, sleep_us); \
+	} \
+	pollret ?: ((cond) ? 0 : -ETIMEDOUT); \
+})
+
 #ifdef CONFIG_REGMAP
 
 enum regmap_endian {