Merge branch 'for-linus' into HEAD

.gitignore

@@ -92,3 +92,6 @@ extra_certificates
 signing_key.priv
 signing_key.x509
 x509.genkey
+
+# Kconfig presets
+all.config

Documentation/00-INDEX

@@ -29,6 +29,8 @@ DMA-ISA-LPC.txt
 	- How to do DMA with ISA (and LPC) devices.
 DMA-attributes.txt
 	- listing of the various possible attributes a DMA region can have
+dmatest.txt
+	- how to compile, configure and use the dmatest system.
 DocBook/
 	- directory with DocBook templates etc. for kernel documentation.
 EDID/
@@ -77,6 +79,8 @@ arm/
 	- directory with info about Linux on the ARM architecture.
 arm64/
 	- directory with info about Linux on the 64 bit ARM architecture.
+assoc_array.txt
+	- generic associative array intro.
 atomic_ops.txt
 	- semantics and behavior of atomic and bitmask operations.
 auxdisplay/
@@ -87,6 +91,8 @@ bad_memory.txt
 	- how to use kernel parameters to exclude bad RAM regions.
 basic_profiling.txt
 	- basic instructions for those who wants to profile Linux kernel.
+bcache.txt
+	- Block-layer cache on fast SSDs to improve slow (raid) I/O performance.
 binfmt_misc.txt
 	- info on the kernel support for extra binary formats.
 blackfin/
@@ -171,6 +177,8 @@ early-userspace/
 	- info about initramfs, klibc, and userspace early during boot.
 edac.txt
 	- information on EDAC - Error Detection And Correction
+efi-stub.txt
+	- How to use the EFI boot stub to bypass GRUB or elilo on EFI systems.
 eisa.txt
 	- info on EISA bus support.
 email-clients.txt
@@ -195,8 +203,8 @@ futex-requeue-pi.txt
 	- info on requeueing of tasks from a non-PI futex to a PI futex
 gcov.txt
 	- use of GCC's coverage testing tool "gcov" with the Linux kernel
-gpio.txt
-	- overview of GPIO (General Purpose Input/Output) access conventions.
+gpio/
+	- gpio related documentation
 hid/
 	- directory with information on human interface devices
 highuid.txt
@@ -255,6 +263,8 @@ kernel-docs.txt
 	- listing of various WWW + books that document kernel internals.
 kernel-parameters.txt
 	- summary listing of command line / boot prompt args for the kernel.
+kernel-per-CPU-kthreads.txt
+	- List of all per-CPU kthreads and how they introduce jitter.
 kmemcheck.txt
 	- info on dynamic checker that detects uses of uninitialized memory.
 kmemleak.txt
@@ -299,8 +309,6 @@ memory-devices/
 	- directory with info on parts like the Texas Instruments EMIF driver
 memory-hotplug.txt
 	- Hotpluggable memory support, how to use and current status.
-memory.txt
-	- info on typical Linux memory problems.
 metag/
 	- directory with info about Linux on Meta architecture.
 mips/
@@ -311,6 +319,8 @@ mmc/
 	- directory with info about the MMC subsystem
 mn10300/
 	- directory with info about the mn10300 architecture port
+module-signing.txt
+	- Kernel module signing for increased security when loading modules.
 mtd/
 	- directory with info about memory technology devices (flash)
 mono.txt
@@ -343,6 +353,8 @@ pcmcia/
 	- info on the Linux PCMCIA driver.
 percpu-rw-semaphore.txt
 	- RCU based read-write semaphore optimized for locking for reading
+phy.txt
+	- Description of the generic PHY framework.
 pi-futex.txt
 	- documentation on lightweight priority inheritance futexes.
 pinctrl.txt
@@ -431,6 +443,8 @@ sysrq.txt
 	- info on the magic SysRq key.
 target/
 	- directory with info on generating TCM v4 fabric .ko modules
+this_cpu_ops.txt
+	- List rationale behind and the way to use this_cpu operations.
 thermal/
 	- directory with information on managing thermal issues (CPU/temp)
 trace/
@@ -469,6 +483,8 @@ wimax/
 	- directory with info about Intel Wireless Wimax Connections
 workqueue.txt
 	- information on the Concurrency Managed Workqueue implementation
+ww-mutex-design.txt
+	- Intro to Mutex wait/would deadlock handling.s
 x86/x86_64/
 	- directory with info on Linux support for AMD x86-64 (Hammer) machines.
 xtensa/

Documentation/ABI/testing/sysfs-tty

@@ -3,7 +3,8 @@ Date:		Nov 2010
 Contact:	Kay Sievers <kay.sievers@vrfy.org>
 Description:
 		 Shows the list of currently configured
-		 console devices, like 'tty1 ttyS0'.
+		 tty devices used for the console,
+		 like 'tty1 ttyS0'.
 		 The last entry in the file is the active
 		 device connected to /dev/console.
 		 The file supports poll() to detect virtual

Documentation/RCU/00-INDEX

@@ -8,6 +8,8 @@ listRCU.txt
 	- Using RCU to Protect Read-Mostly Linked Lists
 lockdep.txt
 	- RCU and lockdep checking
+lockdep-splat.txt
+	- RCU Lockdep splats explained.
 NMI-RCU.txt
 	- Using RCU to Protect Dynamic NMI Handlers
 rcubarrier.txt

Documentation/arm/00-INDEX

@@ -4,6 +4,8 @@ Booting
 	- requirements for booting
 Interrupts
 	- ARM Interrupt subsystem documentation
+IXP4xx
+	- Intel IXP4xx Network processor.
 msm
 	- MSM specific documentation
 Netwinder
@@ -24,8 +26,16 @@ SPEAr
 	- ST SPEAr platform Linux Overview
 VFP/
 	- Release notes for Linux Kernel Vector Floating Point support code
+cluster-pm-race-avoidance.txt
+	- Algorithm for CPU and Cluster setup/teardown
 empeg/
 	- Ltd's Empeg MP3 Car Audio Player
+firmware.txt
+	- Secure firmware registration and calling.
+kernel_mode_neon.txt
+	- How to use NEON instructions in kernel mode
+kernel_user_helpers.txt
+	- Helper functions in kernel space made available for userspace.
 mem_alignment
 	- alignment abort handler documentation
 memory.txt
@@ -34,3 +44,7 @@ nwfpe/
 	- NWFPE floating point emulator documentation
 swp_emulation
 	- SWP/SWPB emulation handler/logging description
+tcm.txt
+	- ARM Tightly Coupled Memory
+vlocks.txt
+	- Voting locks, low-level mechanism relying on memory system atomic writes.

Documentation/blackfin/00-INDEX

@@ -1,8 +1,10 @@
 00-INDEX
 	- This file
-
+Makefile
+	- Makefile for gptimers example file.
 bfin-gpio-notes.txt
 	- Notes in developing/using bfin-gpio driver.
-
 bfin-spi-notes.txt
 	- Notes for using bfin spi bus driver.
+gptimers-example.c
+	- gptimers example

Documentation/block/00-INDEX

@@ -14,6 +14,8 @@ deadline-iosched.txt
 	- Deadline IO scheduler tunables
 ioprio.txt
 	- Block io priorities (in CFQ scheduler)
+null_blk.txt
+	- Null block for block-layer benchmarking.
 queue-sysfs.txt
 	- Queue's sysfs entries
 request.txt

Documentation/devicetree/00-INDEX

@@ -8,3 +8,5 @@ https://lists.ozlabs.org/listinfo/devicetree-discuss
 	- this file
 booting-without-of.txt
 	- Booting Linux without Open Firmware, describes history and format of device trees.
+usage-model.txt
+	- How Linux uses DT and what DT aims to solve.

Documentation/devicetree/bindings/interrupt-controller/lsi,zevio-intc.txt

@@ -0,0 +1,18 @@
+TI-NSPIRE interrupt controller
+
+Required properties:
+- compatible: Compatible property value should be "lsi,zevio-intc".
+
+- reg: Physical base address of the controller and length of memory mapped
+	region.
+
+- interrupt-controller : Identifies the node as an interrupt controller
+
+Example:
+
+interrupt-controller {
+	compatible = "lsi,zevio-intc";
+	interrupt-controller;
+	reg = <0xDC000000 0x1000>;
+	#interrupt-cells = <1>;
+};

Documentation/devicetree/bindings/mmc/atmel-hsmci.txt

@@ -13,6 +13,9 @@ Required properties:
 - #address-cells: should be one. The cell is the slot id.
 - #size-cells: should be zero.
 - at least one slot node
+- clock-names: tuple listing input clock names.
+	Required elements: "mci_clk"
+- clocks: phandles to input clocks.
 
 The node contains child nodes for each slot that the platform uses
 
@@ -24,6 +27,8 @@ mmc0: mmc@f0008000 {
 	interrupts = <12 4>;
 	#address-cells = <1>;
 	#size-cells = <0>;
+	clock-names = "mci_clk";
+	clocks = <&mci0_clk>;
 
 	[ child node definitions...]
 };

Documentation/devicetree/bindings/net/allwinner,sun4i-emac.txt

@@ -1,7 +1,8 @@
 * Allwinner EMAC ethernet controller
 
 Required properties:
-- compatible: should be "allwinner,sun4i-emac".
+- compatible: should be "allwinner,sun4i-a10-emac" (Deprecated:
+              "allwinner,sun4i-emac")
 - reg: address and length of the register set for the device.
 - interrupts: interrupt for the device
 - phy: A phandle to a phy node defining the PHY address (as the reg
@@ -14,7 +15,7 @@ Optional properties:
 Example:
 
 emac: ethernet@01c0b000 {
-       compatible = "allwinner,sun4i-emac";
+       compatible = "allwinner,sun4i-a10-emac";
        reg = <0x01c0b000 0x1000>;
        interrupts = <55>;
        clocks = <&ahb_gates 17>;

Documentation/devicetree/bindings/net/allwinner,sun4i-mdio.txt

@@ -1,7 +1,8 @@
 * Allwinner A10 MDIO Ethernet Controller interface
 
 Required properties:
-- compatible: should be "allwinner,sun4i-mdio".
+- compatible: should be "allwinner,sun4i-a10-mdio"
+              (Deprecated: "allwinner,sun4i-mdio").
 - reg: address and length of the register set for the device.
 
 Optional properties:
@@ -9,7 +10,7 @@ Optional properties:
 
 Example at the SoC level:
 mdio@01c0b080 {
-	compatible = "allwinner,sun4i-mdio";
+	compatible = "allwinner,sun4i-a10-mdio";
 	reg = <0x01c0b080 0x14>;
 	#address-cells = <1>;
 	#size-cells = <0>;

Documentation/devicetree/bindings/power/bq2415x.txt

@@ -0,0 +1,47 @@
+Binding for TI bq2415x Li-Ion Charger
+
+Required properties:
+- compatible: Should contain one of the following:
+ * "ti,bq24150"
+ * "ti,bq24150"
+ * "ti,bq24150a"
+ * "ti,bq24151"
+ * "ti,bq24151a"
+ * "ti,bq24152"
+ * "ti,bq24153"
+ * "ti,bq24153a"
+ * "ti,bq24155"
+ * "ti,bq24156"
+ * "ti,bq24156a"
+ * "ti,bq24158"
+- reg:			   integer, i2c address of the device.
+- ti,current-limit:	   integer, initial maximum current charger can pull
+			   from power supply in mA.
+- ti,weak-battery-voltage: integer, weak battery voltage threshold in mV.
+			   The chip will use slow precharge if battery voltage
+			   is below this value.
+- ti,battery-regulation-voltage: integer, maximum charging voltage in mV.
+- ti,charge-current:	   integer, maximum charging current in mA.
+- ti,termination-current:  integer, charge will be terminated when current in
+			   constant-voltage phase drops below this value (in mA).
+- ti,resistor-sense:	   integer, value of sensing resistor in milliohm.
+
+Optional properties:
+- ti,usb-charger-detection: phandle to usb charger detection device.
+			    (required for auto mode)
+
+Example from Nokia N900:
+
+bq24150a {
+	compatible = "ti,bq24150a";
+	reg = <0x6b>;
+
+	ti,current-limit = <100>;
+	ti,weak-battery-voltage = <3400>;
+	ti,battery-regulation-voltage = <4200>;
+	ti,charge-current = <650>;
+	ti,termination-current = <100>;
+	ti,resistor-sense = <68>;
+
+	ti,usb-charger-detection = <&isp1704>;
+};

Documentation/devicetree/bindings/spi/spi_atmel.txt

@@ -5,6 +5,9 @@ Required properties:
 - reg: Address and length of the register set for the device
 - interrupts: Should contain spi interrupt
 - cs-gpios: chipselects
+- clock-names: tuple listing input clock names.
+	Required elements: "spi_clk"
+- clocks: phandles to input clocks.
 
 Example:
 
@@ -14,6 +17,8 @@ spi1: spi@fffcc000 {
 	interrupts = <13 4 5>;
 	#address-cells = <1>;
 	#size-cells = <0>;
+	clocks = <&spi1_clk>;
+	clock-names = "spi_clk";
 	cs-gpios = <&pioB 3 0>;
 	status = "okay";
 

Documentation/devicetree/bindings/vendor-prefixes.txt

@@ -8,6 +8,7 @@ ad	Avionic Design GmbH
 adi	Analog Devices, Inc.
 aeroflexgaisler	Aeroflex Gaisler AB
 ak	Asahi Kasei Corp.
+allwinner	Allwinner Technology Co., Ltd.
 altr	Altera Corp.
 amcc	Applied Micro Circuits Corporation (APM, formally AMCC)
 amstaos	AMS-Taos Inc.
@@ -40,6 +41,7 @@ gmt	Global Mixed-mode Technology, Inc.
 gumstix	Gumstix, Inc.
 haoyu	Haoyu Microelectronic Co. Ltd.
 hisilicon	Hisilicon Limited.
+honeywell	Honeywell
 hp	Hewlett Packard
 ibm	International Business Machines (IBM)
 idt	Integrated Device Technologies, Inc.
@@ -55,6 +57,7 @@ maxim	Maxim Integrated Products
 microchip	Microchip Technology Inc.
 mosaixtech	Mosaix Technologies, Inc.
 national	National Semiconductor
+neonode		Neonode Inc.
 nintendo	Nintendo
 nvidia	NVIDIA
 nxp	NXP Semiconductors
@@ -64,7 +67,7 @@ phytec	PHYTEC Messtechnik GmbH
 picochip	Picochip Ltd
 powervr	PowerVR (deprecated, use img)
 qca	Qualcomm Atheros, Inc.
-qcom	Qualcomm, Inc.
+qcom	Qualcomm Technologies, Inc
 ralink	Mediatek/Ralink Technology Corp.
 ramtron	Ramtron International
 realtek Realtek Semiconductor Corp.
@@ -78,6 +81,7 @@ silabs	Silicon Laboratories
 simtek
 sirf	SiRF Technology, Inc.
 snps 	Synopsys, Inc.
+spansion	Spansion Inc.
 st	STMicroelectronics
 ste	ST-Ericsson
 stericsson	ST-Ericsson

Documentation/dvb/contributors.txt

@@ -78,7 +78,7 @@ Peter Beutner <p.beutner@gmx.net>
 Wilson Michaels <wilsonmichaels@earthlink.net>
   for the lgdt330x frontend driver, and various bugfixes
 
-Michael Krufky <mkrufky@m1k.net>
+Michael Krufky <mkrufky@linuxtv.org>
   for maintaining v4l/dvb inter-tree dependencies
 
 Taylor Jacob <rtjacob@earthlink.net>

Documentation/fb/00-INDEX

@@ -5,6 +5,8 @@ please mail me.
 
 00-INDEX
 	- this file.
+api.txt
+	- The frame buffer API between applications and buffer devices.
 arkfb.txt
 	- info on the fbdev driver for ARK Logic chips.
 aty128fb.txt
@@ -51,12 +53,16 @@ sh7760fb.txt
 	- info on the SH7760/SH7763 integrated LCDC Framebuffer driver.
 sisfb.txt
 	- info on the framebuffer device driver for various SiS chips.
+sm501.txt
+	- info on the framebuffer device driver for sm501 videoframebuffer.
 sstfb.txt
 	- info on the frame buffer driver for 3dfx' Voodoo Graphics boards.
 tgafb.txt
 	- info on the TGA (DECChip 21030) frame buffer driver.
 tridentfb.txt
 	info on the framebuffer driver for some Trident chip based cards.
+udlfb.txt
+	- Driver for DisplayLink USB 2.0 chips.
 uvesafb.txt
 	- info on the userspace VESA (VBE2+ compliant) frame buffer device.
 vesafb.txt

Documentation/filesystems/00-INDEX

@@ -2,6 +2,8 @@
 	- this file (info on some of the filesystems supported by linux).
 Locking
 	- info on locking rules as they pertain to Linux VFS.
+Makefile
+	- Makefile for building the filsystems-part of DocBook.
 9p.txt
 	- 9p (v9fs) is an implementation of the Plan 9 remote fs protocol.
 adfs.txt

Documentation/filesystems/nfs/00-INDEX

@@ -12,6 +12,8 @@ nfs41-server.txt
 	- info on the Linux server implementation of NFSv4 minor version 1.
 nfs-rdma.txt
 	- how to install and setup the Linux NFS/RDMA client and server software
+nfsd-admin-interfaces.txt
+	- Administrative interfaces for nfsd.
 nfsroot.txt
 	- short guide on setting up a diskless box with NFS root filesystem.
 pnfs.txt
@@ -20,5 +22,5 @@ rpc-cache.txt
 	- introduction to the caching mechanisms in the sunrpc layer.
 idmapper.txt
 	- information for configuring request-keys to be used by idmapper
-knfsd-rpcgss.txt
+rpc-server-gss.txt
 	- Information on GSS authentication support in the NFS Server

Documentation/i2c/instantiating-devices

@@ -8,8 +8,8 @@ reason, the kernel code must instantiate I2C devices explicitly. There are
 several ways to achieve this, depending on the context and requirements.
 
 
-Method 1: Declare the I2C devices by bus number
------------------------------------------------
+Method 1a: Declare the I2C devices by bus number
+------------------------------------------------
 
 This method is appropriate when the I2C bus is a system bus as is the case
 for many embedded systems. On such systems, each I2C bus has a number
@@ -51,6 +51,43 @@ The devices will be automatically unbound and destroyed when the I2C bus
 they sit on goes away (if ever.)
 
 
+Method 1b: Declare the I2C devices via devicetree
+-------------------------------------------------
+
+This method has the same implications as method 1a. The declaration of I2C
+devices is here done via devicetree as subnodes of the master controller.
+
+Example:
+
+	i2c1: i2c@400a0000 {
+		/* ... master properties skipped ... */
+		clock-frequency = <100000>;
+
+		flash@50 {
+			compatible = "atmel,24c256";
+			reg = <0x50>;
+		};
+
+		pca9532: gpio@60 {
+			compatible = "nxp,pca9532";
+			gpio-controller;
+			#gpio-cells = <2>;
+			reg = <0x60>;
+		};
+	};
+
+Here, two devices are attached to the bus using a speed of 100kHz. For
+additional properties which might be needed to set up the device, please refer
+to its devicetree documentation in Documentation/devicetree/bindings/.
+
+
+Method 1c: Declare the I2C devices via ACPI
+-------------------------------------------
+
+ACPI can also describe I2C devices. There is special documentation for this
+which is currently located at Documentation/acpi/enumeration.txt.
+
+
 Method 2: Instantiate the devices explicitly
 --------------------------------------------
 

Documentation/ide/00-INDEX

@@ -10,3 +10,5 @@ ide-tape.txt
 	- info on the IDE ATAPI streaming tape driver
 ide.txt
 	- important info for users of ATA devices (IDE/EIDE disks and CD-ROMS).
+warm-plug-howto.txt
+	- using sysfs to remove and add IDE devices.

Documentation/kernel-parameters.txt

@@ -1726,16 +1726,16 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 			option description.
 
 	memmap=nn[KMG]@ss[KMG]
-			[KNL] Force usage of a specific region of memory
-			Region of memory to be used, from ss to ss+nn.
+			[KNL] Force usage of a specific region of memory.
+			Region of memory to be used is from ss to ss+nn.
 
 	memmap=nn[KMG]#ss[KMG]
 			[KNL,ACPI] Mark specific memory as ACPI data.
-			Region of memory to be used, from ss to ss+nn.
+			Region of memory to be marked is from ss to ss+nn.
 
 	memmap=nn[KMG]$ss[KMG]
 			[KNL,ACPI] Mark specific memory as reserved.
-			Region of memory to be used, from ss to ss+nn.
+			Region of memory to be reserved is from ss to ss+nn.
 			Example: Exclude memory from 0x18690000-0x1869ffff
 			         memmap=64K$0x18690000
 			         or

Documentation/laptops/00-INDEX

@@ -1,13 +1,15 @@
 00-INDEX
 	- This file
-acer-wmi.txt
-	- information on the Acer Laptop WMI Extras driver.
+Makefile
+	- Makefile for building dslm example program.
 asus-laptop.txt
 	- information on the Asus Laptop Extras driver.
 disk-shock-protection.txt
 	- information on hard disk shock protection.
 dslm.c
 	- Simple Disk Sleep Monitor program
+hpfall.c
+	- (HP) laptop accelerometer program for disk protection.
 laptop-mode.txt
 	- how to conserve battery power using laptop-mode.
 sony-laptop.txt

Documentation/leds/00-INDEX

@@ -1,3 +1,7 @@
+00-INDEX
+	- This file
+leds-blinkm.txt
+	- Driver for BlinkM LED-devices.
 leds-class.txt
 	- documents LED handling under Linux.
 leds-lp3944.txt
@@ -12,3 +16,7 @@ leds-lp55xx.txt
 	- description about lp55xx common driver.
 leds-lm3556.txt
 	- notes on how to use the leds-lm3556 driver.
+ledtrig-oneshot.txt
+	- One-shot LED trigger for both sporadic and dense events.
+ledtrig-transient.txt
+	- LED Transient Trigger, one shot timer activation.

Documentation/m68k/00-INDEX

@@ -1,5 +1,7 @@
 00-INDEX
 	- this file
+README.buddha
+	- Amiga Buddha and Catweasel IDE Driver
 kernel-options.txt
 	- command line options for Linux/m68k
 

Documentation/networking/00-INDEX

@@ -6,8 +6,14 @@
 	- information on the 3Com Etherlink III Series Ethernet cards.
 6pack.txt
 	- info on the 6pack protocol, an alternative to KISS for AX.25
-DLINK.txt
-	- info on the D-Link DE-600/DE-620 parallel port pocket adapters
+LICENSE.qla3xxx
+	- GPLv2 for QLogic Linux Networking HBA Driver
+LICENSE.qlge
+	- GPLv2 for QLogic Linux qlge NIC Driver
+LICENSE.qlcnic
+	- GPLv2 for QLogic Linux qlcnic NIC Driver
+Makefile
+	- Makefile for docsrc.
 PLIP.txt
 	- PLIP: The Parallel Line Internet Protocol device driver
 README.ipw2100
@@ -17,7 +23,7 @@ README.ipw2200
 README.sb1000
 	- info on General Instrument/NextLevel SURFboard1000 cable modem.
 alias.txt
-	- info on using alias network devices 
+	- info on using alias network devices.
 arcnet-hardware.txt
 	- tons of info on ARCnet, hubs, jumper settings for ARCnet cards, etc.
 arcnet.txt
@@ -80,7 +86,7 @@ framerelay.txt
 	- info on using Frame Relay/Data Link Connection Identifier (DLCI).
 gen_stats.txt
 	- Generic networking statistics for netlink users.
-generic_hdlc.txt
+generic-hdlc.txt
 	- The generic High Level Data Link Control (HDLC) layer.
 generic_netlink.txt
 	- info on Generic Netlink
@@ -88,6 +94,8 @@ gianfar.txt
 	- Gianfar Ethernet Driver.
 i40e.txt
 	- README for the Intel Ethernet Controller XL710 Driver (i40e).
+i40evf.txt
+	- Short note on the Driver for the Intel(R) XL710 X710 Virtual Function
 ieee802154.txt
 	- Linux IEEE 802.15.4 implementation, API and drivers
 igb.txt
@@ -102,6 +110,8 @@ ipddp.txt
 	- AppleTalk-IP Decapsulation and AppleTalk-IP Encapsulation
 iphase.txt
 	- Interphase PCI ATM (i)Chip IA Linux driver info.
+ipsec.txt
+	- Note on not compressing IPSec payload and resulting failed policy check.
 ipv6.txt
 	- Options to the ipv6 kernel module.
 ipvs-sysctl.txt
@@ -120,6 +130,8 @@ lapb-module.txt
 	- programming information of the LAPB module.
 ltpc.txt
 	- the Apple or Farallon LocalTalk PC card driver
+mac80211-auth-assoc-deauth.txt
+	- authentication and association / deauth-disassoc with max80211
 mac80211-injection.txt
 	- HOWTO use packet injection with mac80211
 multiqueue.txt
@@ -134,6 +146,10 @@ netdevices.txt
 	- info on network device driver functions exported to the kernel.
 netif-msg.txt
 	- Design of the network interface message level setting (NETIF_MSG_*).
+netlink_mmap.txt
+	- memory mapped I/O with netlink
+nf_conntrack-sysctl.txt
+	- list of netfilter-sysctl knobs.
 nfc.txt
 	- The Linux Near Field Communication (NFS) subsystem.
 openvswitch.txt
@@ -176,7 +192,7 @@ skfp.txt
 	- SysKonnect FDDI (SK-5xxx, Compaq Netelligent) driver info.
 smc9.txt
 	- the driver for SMC's 9000 series of Ethernet cards
-spider-net.txt
+spider_net.txt
 	- README for the Spidernet Driver (as found in PS3 / Cell BE).
 stmmac.txt
 	- README for the STMicro Synopsys Ethernet driver.
@@ -188,6 +204,8 @@ tcp.txt
 	- short blurb on how TCP output takes place.
 tcp-thin.txt
 	- kernel tuning options for low rate 'thin' TCP streams.
+team.txt
+	- pointer to information for ethernet teaming devices.
 tlan.txt
 	- ThunderLAN (Compaq Netelligent 10/100, Olicom OC-2xxx) driver info.
 tproxy.txt
@@ -200,6 +218,8 @@ vortex.txt
 	- info on using 3Com Vortex (3c590, 3c592, 3c595, 3c597) Ethernet cards.
 vxge.txt
 	- README for the Neterion X3100 PCIe Server Adapter.
+vxlan.txt
+	- Virtual extensible LAN overview
 x25.txt
 	- general info on X.25 development.
 x25-iface.txt

Documentation/phy.txt

@@ -75,14 +75,26 @@ Before the controller can make use of the PHY, it has to get a reference to
 it. This framework provides the following APIs to get a reference to the PHY.
 
 struct phy *phy_get(struct device *dev, const char *string);
+struct phy *phy_optional_get(struct device *dev, const char *string);
 struct phy *devm_phy_get(struct device *dev, const char *string);
-
-phy_get and devm_phy_get can be used to get the PHY. In the case of dt boot,
-the string arguments should contain the phy name as given in the dt data and
-in the case of non-dt boot, it should contain the label of the PHY.
-The only difference between the two APIs is that devm_phy_get associates the
-device with the PHY using devres on successful PHY get. On driver detach,
-release function is invoked on the the devres data and devres data is freed.
+struct phy *devm_phy_optional_get(struct device *dev, const char *string);
+
+phy_get, phy_optional_get, devm_phy_get and devm_phy_optional_get can
+be used to get the PHY. In the case of dt boot, the string arguments
+should contain the phy name as given in the dt data and in the case of
+non-dt boot, it should contain the label of the PHY.  The two
+devm_phy_get associates the device with the PHY using devres on
+successful PHY get. On driver detach, release function is invoked on
+the the devres data and devres data is freed. phy_optional_get and
+devm_phy_optional_get should be used when the phy is optional. These
+two functions will never return -ENODEV, but instead returns NULL when
+the phy cannot be found.
+
+It should be noted that NULL is a valid phy reference. All phy
+consumer calls on the NULL phy become NOPs. That is the release calls,
+the phy_init() and phy_exit() calls, and phy_power_on() and
+phy_power_off() calls are all NOP when applied to a NULL phy. The NULL
+phy is useful in devices for handling optional phy devices.
 
 5. Releasing a reference to the PHY
 

Documentation/power/00-INDEX

@@ -4,6 +4,8 @@ apm-acpi.txt
 	- basic info about the APM and ACPI support.
 basic-pm-debugging.txt
 	- Debugging suspend and resume
+charger-manager.txt
+	- Battery charger management.
 devices.txt
 	- How drivers interact with system-wide power management
 drivers-testing.txt
@@ -22,6 +24,8 @@ pm_qos_interface.txt
 	- info on Linux PM Quality of Service interface
 power_supply_class.txt
 	- Tells userspace about battery, UPS, AC or DC power supply properties
+runtime_pm.txt
+	- Power management framework for I/O devices.
 s2ram.txt
 	- How to get suspend to ram working (and debug it when it isn't)
 states.txt
@@ -38,7 +42,5 @@ tricks.txt
 	- How to trick software suspend (to disk) into working when it isn't
 userland-swsusp.txt
 	- Experimental implementation of software suspend in userspace
-video_extension.txt
-	- ACPI video extensions
 video.txt
 	- Video issues during resume from suspend

Documentation/ptp/testptp.c

@@ -117,6 +117,7 @@ static void usage(char *progname)
 		" -f val     adjust the ptp clock frequency by 'val' ppb\n"
 		" -g         get the ptp clock time\n"
 		" -h         prints this message\n"
+		" -i val     index for event/trigger\n"
 		" -k val     measure the time offset between system and phc clock\n"
 		"            for 'val' times (Maximum 25)\n"
 		" -p val     enable output with a period of 'val' nanoseconds\n"
@@ -154,6 +155,7 @@ int main(int argc, char *argv[])
 	int capabilities = 0;
 	int extts = 0;
 	int gettime = 0;
+	int index = 0;
 	int oneshot = 0;
 	int pct_offset = 0;
 	int n_samples = 0;
@@ -167,7 +169,7 @@ int main(int argc, char *argv[])
 
 	progname = strrchr(argv[0], '/');
 	progname = progname ? 1+progname : argv[0];
-	while (EOF != (c = getopt(argc, argv, "a:A:cd:e:f:ghk:p:P:sSt:v"))) {
+	while (EOF != (c = getopt(argc, argv, "a:A:cd:e:f:ghi:k:p:P:sSt:v"))) {
 		switch (c) {
 		case 'a':
 			oneshot = atoi(optarg);
@@ -190,6 +192,9 @@ int main(int argc, char *argv[])
 		case 'g':
 			gettime = 1;
 			break;
+		case 'i':
+			index = atoi(optarg);
+			break;
 		case 'k':
 			pct_offset = 1;
 			n_samples = atoi(optarg);
@@ -301,7 +306,7 @@ int main(int argc, char *argv[])
 
 	if (extts) {
 		memset(&extts_request, 0, sizeof(extts_request));
-		extts_request.index = 0;
+		extts_request.index = index;
 		extts_request.flags = PTP_ENABLE_FEATURE;
 		if (ioctl(fd, PTP_EXTTS_REQUEST, &extts_request)) {
 			perror("PTP_EXTTS_REQUEST");
@@ -375,7 +380,7 @@ int main(int argc, char *argv[])
 			return -1;
 		}
 		memset(&perout_request, 0, sizeof(perout_request));
-		perout_request.index = 0;
+		perout_request.index = index;
 		perout_request.start.sec = ts.tv_sec + 2;
 		perout_request.start.nsec = 0;
 		perout_request.period.sec = 0;

Documentation/s390/00-INDEX

@@ -16,11 +16,13 @@ Debugging390.txt
 	- hints for debugging on s390 systems.
 driver-model.txt
 	- information on s390 devices and the driver model.
+kvm.txt
+	- ioctl calls to /dev/kvm on s390.
 monreader.txt
 	- information on accessing the z/VM monitor stream from Linux.
+qeth.txt
+	- HiperSockets Bridge Port Support.
 s390dbf.txt
 	- information on using the s390 debug feature.
-TAPE
-	- information on the driver for channel-attached tapes.
-zfcpdump
+zfcpdump.txt
 	- information on the s390 SCSI dump tool.

Documentation/scheduler/00-INDEX

@@ -2,6 +2,8 @@
 	- this file.
 sched-arch.txt
 	- CPU Scheduler implementation hints for architecture specific code.
+sched-bwc.txt
+	- CFS bandwidth control overview.
 sched-design-CFS.txt
 	- goals, design and implementation of the Completely Fair Scheduler.
 sched-domains.txt

Documentation/scsi/00-INDEX

@@ -36,6 +36,8 @@ NinjaSCSI.txt
 	- info on WorkBiT NinjaSCSI-32/32Bi driver
 aacraid.txt
 	- Driver supporting Adaptec RAID controllers
+advansys.txt
+	- List of Advansys Host Adapters
 aha152x.txt
 	- info on driver for Adaptec AHA152x based adapters
 aic79xx.txt
@@ -44,6 +46,12 @@ aic7xxx.txt
 	- info on driver for Adaptec controllers
 arcmsr_spec.txt
 	- ARECA FIRMWARE SPEC (for IOP331 adapter)
+bfa.txt
+	- Brocade FC/FCOE adapter driver.
+bnx2fc.txt
+	- FCoE hardware offload for Broadcom network interfaces.
+cxgb3i.txt
+	- Chelsio iSCSI Linux Driver
 dc395x.txt
 	- README file for the dc395x SCSI driver
 dpti.txt
@@ -52,18 +60,24 @@ dtc3x80.txt
 	- info on driver for DTC 2x80 based adapters
 g_NCR5380.txt
 	- info on driver for NCR5380 and NCR53c400 based adapters
+hpsa.txt
+	- HP Smart Array Controller SCSI driver.
 hptiop.txt
 	- HIGHPOINT ROCKETRAID 3xxx RAID DRIVER
 in2000.txt
 	- info on in2000 driver
 libsas.txt
 	- Serial Attached SCSI management layer.
+link_power_management_policy.txt
+	- Link power management options.
 lpfc.txt
 	- LPFC driver release notes
 megaraid.txt
 	- Common Management Module, shared code handling ioctls for LSI drivers
 ncr53c8xx.txt
 	- info on driver for NCR53c8xx based adapters
+osd.txt
+	Object-Based Storage Device, command set introduction.
 osst.txt
 	- info on driver for OnStream SC-x0 SCSI tape
 ppa.txt
@@ -74,6 +88,8 @@ scsi-changer.txt
 	- README for the SCSI media changer driver
 scsi-generic.txt
 	- info on the sg driver for generic (non-disk/CD/tape) SCSI devices.
+scsi-parameters.txt
+	- List of SCSI-parameters to pass to the kernel at module load-time.
 scsi.txt
 	- short blurb on using SCSI support as a module.
 scsi_mid_low_api.txt

Documentation/serial/00-INDEX

@@ -4,10 +4,12 @@ README.cycladesZ
 	- info on Cyclades-Z firmware loading.
 digiepca.txt
 	- info on Digi Intl. {PC,PCI,EISA}Xx and Xem series cards.
-hayes-esp.txt
-	- info on using the Hayes ESP serial driver.
+driver
+	- intro to the low level serial driver.
 moxa-smartio
 	- file with info on installing/using Moxa multiport serial driver.
+n_gsm.txt
+	- GSM 0710 tty multiplexer howto.
 riscom8.txt
 	- notes on using the RISCom/8 multi-port serial driver.
 rocket.txt

Documentation/spi/00-INDEX

@@ -0,0 +1,22 @@
+00-INDEX
+	- this file.
+Makefile
+	- Makefile for the example sourcefiles.
+butterfly
+	- AVR Butterfly SPI driver overview and pin configuration.
+ep93xx_spi
+	- Basic EP93xx SPI driver configuration.
+pxa2xx
+	- PXA2xx SPI master controller build by spi_message fifo wq
+spidev
+	- Intro to the userspace API for spi devices
+spidev_fdx.c
+	- spidev example file
+spi-lm70llp
+	- Connecting an LM70-LLP sensor to the kernel via the SPI subsys.
+spi-sc18is602
+	- NXP SC18IS602/603 I2C-bus to SPI bridge
+spi-summary
+	- (Linux) SPI overview. If unsure about SPI or SPI in Linux, start here.
+spidev_test.c
+	- SPI testing utility.

Documentation/spi/spi-summary

@@ -543,7 +543,22 @@ SPI MASTER METHODS
 	queuing transfers that arrive in the meantime. When the driver is
 	finished with this message, it must call
 	spi_finalize_current_message() so the subsystem can issue the next
-	transfer. This may sleep.
+	message. This may sleep.
+
+    master->transfer_one(struct spi_master *master, struct spi_device *spi,
+			 struct spi_transfer *transfer)
+	The subsystem calls the driver to transfer a single transfer while
+	queuing transfers that arrive in the meantime. When the driver is
+	finished with this transfer, it must call
+	spi_finalize_current_transfer() so the subsystem can issue the next
+	transfer. This may sleep. Note: transfer_one and transfer_one_message
+	are mutually exclusive; when both are set, the generic subsystem does
+	not call your transfer_one callback.
+
+	Return values:
+	negative errno: error
+	0: transfer is finished
+	1: transfer is still in progress
 
     DEPRECATED METHODS
 

Documentation/timers/00-INDEX

@@ -8,6 +8,8 @@ hpet_example.c
 	- sample hpet timer test program
 hrtimers.txt
 	- subsystem for high-resolution kernel timers
+Makefile
+	- Build and link hpet_example
 NO_HZ.txt
 	- Summary of the different methods for the scheduler clock-interrupts management.
 timers-howto.txt

Documentation/virtual/kvm/00-INDEX

@@ -20,5 +20,7 @@ ppc-pv.txt
 	- the paravirtualization interface on PowerPC.
 review-checklist.txt
 	- review checklist for KVM patches.
+s390-diag.txt
+	- Diagnose hypercall description (for IBM S/390)
 timekeeping.txt
 	- timekeeping virtualization for x86-based architectures.

Documentation/vm/00-INDEX

@@ -16,8 +16,6 @@ hwpoison.txt
 	- explains what hwpoison is
 ksm.txt
 	- how to use the Kernel Samepage Merging feature.
-locking
-	- info on how locking and synchronization is done in the Linux vm code.
 numa
 	- information about NUMA specific code in the Linux vm.
 numa_memory_policy.txt
@@ -32,6 +30,8 @@ slub.txt
 	- a short users guide for SLUB.
 soft-dirty.txt
 	- short explanation for soft-dirty PTEs
+split_page_table_lock
+	- Separate per-table lock to improve scalability of the old page_table_lock.
 transhuge.txt
 	- Transparent Hugepage Support, alternative way of using hugepages.
 unevictable-lru.txt

Documentation/w1/masters/00-INDEX

@@ -4,7 +4,9 @@ ds2482
 	- The Maxim/Dallas Semiconductor DS2482 provides 1-wire busses.
 ds2490
 	- The Maxim/Dallas Semiconductor DS2490 builds USB <-> W1 bridges.
-mxc_w1
+mxc-w1
 	- W1 master controller driver found on Freescale MX2/MX3 SoCs
+omap-hdq
+	- HDQ/1-wire module of TI OMAP 2430/3430.
 w1-gpio
 	- GPIO 1-wire bus master driver.

Documentation/w1/slaves/00-INDEX

@@ -4,3 +4,5 @@ w1_therm
 	- The Maxim/Dallas Semiconductor ds18*20 temperature sensor.
 w1_ds2423
 	- The Maxim/Dallas Semiconductor ds2423 counter device.
+w1_ds28e04
+	- The Maxim/Dallas Semiconductor ds28e04 eeprom.

Documentation/x86/00-INDEX

@@ -1,6 +1,20 @@
 00-INDEX
 	- this file
-mtrr.txt
-	- how to use x86 Memory Type Range Registers to increase performance
+boot.txt
+	- List of boot protocol versions
+early-microcode.txt
+	- How to load microcode from an initrd-CPIO archive early to fix CPU issues.
+earlyprintk.txt
+	- Using earlyprintk with a USB2 debug port key.
+entry_64.txt
+	- Describe (some of the) kernel entry points for x86.
 exception-tables.txt
 	- why and how Linux kernel uses exception tables on x86
+mtrr.txt
+	- how to use x86 Memory Type Range Registers to increase performance
+pat.txt
+	- Page Attribute Table intro and API
+usb-legacy-support.txt
+	- how to fix/avoid quirks when using emulated PS/2 mouse/keyboard.
+zero-page.txt
+	- layout of the first page of memory.

Documentation/zh_CN/arm64/booting.txt

@@ -7,7 +7,7 @@ help.  Contact the Chinese maintainer if this translation is outdated
 or if there is a problem with the translation.
 
 Maintainer: Will Deacon <will.deacon@arm.com>
-Chinese maintainer: Fu Wei <tekkamanninja@gmail.com>
+Chinese maintainer: Fu Wei <wefu@redhat.com>
 ---------------------------------------------------------------------
 Documentation/arm64/booting.txt 的中文翻译
 
@@ -16,9 +16,9 @@ Documentation/arm64/booting.txt 的中文翻译
 译存在问题，请联系中文版维护者。
 
 英文版维护者： Will Deacon <will.deacon@arm.com>
-中文版维护者： 傅炜  Fu Wei <tekkamanninja@gmail.com>
-中文版翻译者： 傅炜  Fu Wei <tekkamanninja@gmail.com>
-中文版校译者： 傅炜  Fu Wei <tekkamanninja@gmail.com>
+中文版维护者： 傅炜  Fu Wei <wefu@redhat.com>
+中文版翻译者： 傅炜  Fu Wei <wefu@redhat.com>
+中文版校译者： 傅炜  Fu Wei <wefu@redhat.com>
 
 以下为正文
 ---------------------------------------------------------------------
@@ -64,8 +64,8 @@ RAM，或可能使用对这个设备已知的 RAM 信息，还可能使用任何
 
 必要性: 强制
 
-设备树数据块（dtb）大小必须不大于 2 MB，且位于从内核映像起始算起第一个
-512MB 内的 2MB 边界上。这使得内核可以通过初始页表中的单个节描述符来
+设备树数据块（dtb）必须 8 字节对齐，并位于从内核映像起始算起第一个 512MB
+内，且不得跨越 2MB 对齐边界。这使得内核可以通过初始页表中的单个节描述符来
 映射此数据块。
 
 
@@ -84,13 +84,23 @@ AArch64 内核当前没有提供自解压代码，因此如果使用了压缩内
 
 必要性: 强制
 
-已解压的内核映像包含一个 32 字节的头，内容如下：
+已解压的内核映像包含一个 64 字节的头，内容如下：
 
-  u32 magic	= 0x14000008;	/* 跳转到 stext, 小端 */
-  u32 res0	= 0;		/* 保留 */
+  u32 code0;			/* 可执行代码 */
+  u32 code1;			/* 可执行代码 */
   u64 text_offset;		/* 映像装载偏移 */
+  u64 res0	= 0;		/* 保留 */
   u64 res1	= 0;		/* 保留 */
   u64 res2	= 0;		/* 保留 */
+  u64 res3	= 0;		/* 保留 */
+  u64 res4	= 0;		/* 保留 */
+  u32 magic	= 0x644d5241;	/* 魔数, 小端, "ARM\x64" */
+  u32 res5 = 0;      		/* 保留 */
+
+
+映像头注释：
+
+- code0/code1 负责跳转到 stext.
 
 映像必须位于系统 RAM 起始处的特定偏移（当前是 0x80000）。系统 RAM
 的起始地址必须是以 2MB 对齐的。
@@ -118,9 +128,9 @@ AArch64 内核当前没有提供自解压代码，因此如果使用了压缩内
   外部高速缓存（如果存在）必须配置并禁用。
 
 - 架构计时器
-  CNTFRQ 必须设定为计时器的频率。
-  如果在 EL1 模式下进入内核，则 CNTHCTL_EL2 中的 EL1PCTEN (bit 0)
-  必须置位。
+  CNTFRQ 必须设定为计时器的频率，且 CNTVOFF 必须设定为对所有 CPU
+  都一致的值。如果在 EL1 模式下进入内核，则 CNTHCTL_EL2 中的
+  EL1PCTEN (bit 0) 必须置位。
 
 - 一致性
   通过内核启动的所有 CPU 在内核入口地址上必须处于相同的一致性域中。
@@ -131,23 +141,40 @@ AArch64 内核当前没有提供自解压代码，因此如果使用了压缩内
   在进入内核映像的异常级中，所有构架中可写的系统寄存器必须通过软件
   在一个更高的异常级别下初始化，以防止在 未知 状态下运行。
 
+以上对于 CPU 模式、高速缓存、MMU、架构计时器、一致性、系统寄存器的
+必要条件描述适用于所有 CPU。所有 CPU 必须在同一异常级别跳入内核。
+
 引导装载程序必须在每个 CPU 处于以下状态时跳入内核入口：
 
 - 主 CPU 必须直接跳入内核映像的第一条指令。通过此 CPU 传递的设备树
-  数据块必须在每个 CPU 节点中包含以下内容：
-
-    1、‘enable-method’属性。目前，此字段支持的值仅为字符串“spin-table”。
-
-    2、‘cpu-release-addr’标识一个 64-bit、初始化为零的内存位置。
+  数据块必须在每个 CPU 节点中包含一个 ‘enable-method’ 属性，所
+  支持的 enable-method 请见下文。
 
   引导装载程序必须生成这些设备树属性，并在跳入内核入口之前将其插入
   数据块。
 
-- 任何辅助 CPU 必须在内存保留区（通过设备树中的 /memreserve/ 域传递
+- enable-method 为 “spin-table” 的 CPU 必须在它们的 CPU
+  节点中包含一个 ‘cpu-release-addr’ 属性。这个属性标识了一个
+  64 位自然对齐且初始化为零的内存位置。
+
+  这些 CPU 必须在内存保留区（通过设备树中的 /memreserve/ 域传递
   给内核）中自旋于内核之外，轮询它们的 cpu-release-addr 位置（必须
   包含在保留区中）。可通过插入 wfe 指令来降低忙循环开销，而主 CPU 将
   发出 sev 指令。当对 cpu-release-addr 所指位置的读取操作返回非零值
-  时，CPU 必须直接跳入此值所指向的地址。
+  时，CPU 必须跳入此值所指向的地址。此值为一个单独的 64 位小端值，
+  因此 CPU 须在跳转前将所读取的值转换为其本身的端模式。
+
+- enable-method 为 “psci” 的 CPU 保持在内核外（比如，在
+  memory 节点中描述为内核空间的内存区外，或在通过设备树 /memreserve/
+  域中描述为内核保留区的空间中）。内核将会发起在 ARM 文档（编号
+  ARM DEN 0022A：用于 ARM 上的电源状态协调接口系统软件）中描述的
+  CPU_ON 调用来将 CPU 带入内核。
+
+  *译者注:到文档翻译时，此文档已更新为 ARM DEN 0022B。
+
+  设备树必须包含一个 ‘psci’ 节点，请参考以下文档：
+  Documentation/devicetree/bindings/arm/psci.txt
+
 
 - 辅助 CPU 通用寄存器设置
   x0 = 0 (保留，将来可能使用)

Documentation/zh_CN/arm64/memory.txt

@@ -7,7 +7,7 @@ help.  Contact the Chinese maintainer if this translation is outdated
 or if there is a problem with the translation.
 
 Maintainer: Catalin Marinas <catalin.marinas@arm.com>
-Chinese maintainer: Fu Wei <tekkamanninja@gmail.com>
+Chinese maintainer: Fu Wei <wefu@redhat.com>
 ---------------------------------------------------------------------
 Documentation/arm64/memory.txt 的中文翻译
 
@@ -16,9 +16,9 @@ Documentation/arm64/memory.txt 的中文翻译
 译存在问题，请联系中文版维护者。
 
 英文版维护者： Catalin Marinas <catalin.marinas@arm.com>
-中文版维护者： 傅炜  Fu Wei <tekkamanninja@gmail.com>
-中文版翻译者： 傅炜  Fu Wei <tekkamanninja@gmail.com>
-中文版校译者： 傅炜  Fu Wei <tekkamanninja@gmail.com>
+中文版维护者： 傅炜  Fu Wei <wefu@redhat.com>
+中文版翻译者： 傅炜  Fu Wei <wefu@redhat.com>
+中文版校译者： 傅炜  Fu Wei <wefu@redhat.com>
 
 以下为正文
 ---------------------------------------------------------------------
@@ -41,7 +41,7 @@ AArch64 Linux 使用页大小为 4KB 的 3 级转换表配置，对于用户和
 TTBR1 中，且从不写入 TTBR0。
 
 
-AArch64 Linux 内存布局：
+AArch64 Linux 在页大小为 4KB 时的内存布局：
 
 起始地址			结束地址			大小		用途
 -----------------------------------------------------------------------
@@ -55,15 +55,42 @@ ffffffbc00000000	ffffffbdffffffff	   8GB		vmemmap
 
 ffffffbe00000000	ffffffbffbbfffff	  ~8GB		[防护页，未来用于 vmmemap]
 
+ffffffbffbc00000	ffffffbffbdfffff	   2MB		earlyprintk 设备
+
 ffffffbffbe00000	ffffffbffbe0ffff	  64KB		PCI I/O 空间
 
-ffffffbbffff0000	ffffffbcffffffff	  ~2MB		[防护页]
+ffffffbffbe10000	ffffffbcffffffff	  ~2MB		[防护页]
 
 ffffffbffc000000	ffffffbfffffffff	  64MB		模块
 
 ffffffc000000000	ffffffffffffffff	 256GB		内核逻辑内存映射
 
 
+AArch64 Linux 在页大小为 64KB 时的内存布局：
+
+起始地址			结束地址			大小		用途
+-----------------------------------------------------------------------
+0000000000000000	000003ffffffffff	   4TB		用户空间
+
+fffffc0000000000	fffffdfbfffeffff	  ~2TB		vmalloc
+
+fffffdfbffff0000	fffffdfbffffffff	  64KB		[防护页]
+
+fffffdfc00000000	fffffdfdffffffff	   8GB		vmemmap
+
+fffffdfe00000000	fffffdfffbbfffff	  ~8GB		[防护页，未来用于 vmmemap]
+
+fffffdfffbc00000	fffffdfffbdfffff	   2MB		earlyprintk 设备
+
+fffffdfffbe00000	fffffdfffbe0ffff	  64KB		PCI I/O 空间
+
+fffffdfffbe10000	fffffdfffbffffff	  ~2MB		[防护页]
+
+fffffdfffc000000	fffffdffffffffff	  64MB		模块
+
+fffffe0000000000	ffffffffffffffff	   2TB		内核逻辑内存映射
+
+
 4KB 页大小的转换表查找：
 
 +--------+--------+--------+--------+--------+--------+--------+--------+
@@ -91,3 +118,10 @@ ffffffc000000000	ffffffffffffffff	 256GB		内核逻辑内存映射
  |                 |    +--------------------------> [41:29] L2 索引 (仅使用 38:29 )
  |                 +-------------------------------> [47:42] L1 索引 (未使用)
  +-------------------------------------------------> [63] TTBR0/1
+
+当使用 KVM 时, 管理程序（hypervisor）在 EL2 中通过相对内核虚拟地址的
+一个固定偏移来映射内核页（内核虚拟地址的高 24 位设为零）:
+
+起始地址			结束地址			大小		用途
+-----------------------------------------------------------------------
+0000004000000000	0000007fffffffff	 256GB		在 HYP 中映射的内核对象

Documentation/zh_CN/arm64/tagged-pointers.txt

@@ -0,0 +1,52 @@
+Chinese translated version of Documentation/arm64/tagged-pointers.txt
+
+If you have any comment or update to the content, please contact the
+original document maintainer directly.  However, if you have a problem
+communicating in English you can also ask the Chinese maintainer for
+help.  Contact the Chinese maintainer if this translation is outdated
+or if there is a problem with the translation.
+
+Maintainer: Will Deacon <will.deacon@arm.com>
+Chinese maintainer: Fu Wei <wefu@redhat.com>
+---------------------------------------------------------------------
+Documentation/arm64/tagged-pointers.txt 的中文翻译
+
+如果想评论或更新本文的内容，请直接联系原文档的维护者。如果你使用英文
+交流有困难的话，也可以向中文版维护者求助。如果本翻译更新不及时或者翻
+译存在问题，请联系中文版维护者。
+
+英文版维护者： Will Deacon <will.deacon@arm.com>
+中文版维护者： 傅炜  Fu Wei <wefu@redhat.com>
+中文版翻译者： 傅炜  Fu Wei <wefu@redhat.com>
+中文版校译者： 傅炜  Fu Wei <wefu@redhat.com>
+
+以下为正文
+---------------------------------------------------------------------
+		Linux 在 AArch64 中带标记的虚拟地址
+		=================================
+
+作者: Will Deacon <will.deacon@arm.com>
+日期: 2013 年 06 月 12 日
+
+本文档简述了在 AArch64 地址转换系统中提供的带标记的虚拟地址及其在
+AArch64 Linux 中的潜在用途。
+
+内核提供的地址转换表配置使通过 TTBR0 完成的虚拟地址转换（即用户空间
+映射），其虚拟地址的最高 8 位（63:56）会被转换硬件所忽略。这种机制
+让这些位可供应用程序自由使用，其注意事项如下：
+
+	(1) 内核要求所有传递到 EL1 的用户空间地址带有 0x00 标记。
+	    这意味着任何携带用户空间虚拟地址的系统调用（syscall）
+	    参数 *必须* 在陷入内核前使它们的最高字节被清零。
+
+	(2) 非零标记在传递信号时不被保存。这意味着在应用程序中利用了
+	    标记的信号处理函数无法依赖 siginfo_t 的用户空间虚拟
+	    地址所携带的包含其内部域信息的标记。此规则的一个例外是
+	    当信号是在调试观察点的异常处理程序中产生的，此时标记的
+	    信息将被保存。
+
+	(3) 当使用带标记的指针时需特别留心，因为仅对两个虚拟地址
+	    的高字节，C 编译器很可能无法判断它们是不同的。
+
+此构架会阻止对带标记的 PC 指针的利用，因此在异常返回时，其高字节
+将被设置成一个为 “55” 的扩展符。

MAINTAINERS

@@ -2367,7 +2367,7 @@ F:	include/linux/cpufreq.h
 
 CPU FREQUENCY DRIVERS - ARM BIG LITTLE
 M:	Viresh Kumar <viresh.kumar@linaro.org>
-M:	Sudeep KarkadaNagesha <sudeep.karkadanagesha@arm.com>
+M:	Sudeep Holla <sudeep.holla@arm.com>
 L:	cpufreq@vger.kernel.org
 L:	linux-pm@vger.kernel.org
 W:	http://www.arm.com/products/processors/technologies/biglittleprocessing.php
@@ -2857,7 +2857,7 @@ M:	Jani Nikula <jani.nikula@linux.intel.com>
 L:	intel-gfx@lists.freedesktop.org
 L:	dri-devel@lists.freedesktop.org
 Q:	http://patchwork.freedesktop.org/project/intel-gfx/
-T:	git git://people.freedesktop.org/~danvet/drm-intel
+T:	git git://anongit.freedesktop.org/drm-intel
 S:	Supported
 F:	drivers/gpu/drm/i915/
 F:	include/drm/i915*
@@ -7196,7 +7196,7 @@ S:	Maintained
 F:	drivers/net/ethernet/rdc/r6040.c
 
 RDS - RELIABLE DATAGRAM SOCKETS
-M:	Venkat Venkatsubra <venkat.x.venkatsubra@oracle.com>
+M:	Chien Yen <chien.yen@oracle.com>
 L:	rds-devel@oss.oracle.com (moderated for non-subscribers)
 S:	Supported
 F:	net/rds/

Makefile

@@ -1,7 +1,7 @@
 VERSION = 3
 PATCHLEVEL = 14
 SUBLEVEL = 0
-EXTRAVERSION = -rc1
+EXTRAVERSION = -rc3
 NAME = Shuffling Zombie Juror
 
 # *DOCUMENTATION*

arch/arm/boot/dts/Makefile

@@ -38,6 +38,7 @@ dtb-$(CONFIG_ARCH_AT91) += at91sam9g35ek.dtb
 dtb-$(CONFIG_ARCH_AT91) += at91sam9x25ek.dtb
 dtb-$(CONFIG_ARCH_AT91) += at91sam9x35ek.dtb
 # sama5d3
+dtb-$(CONFIG_ARCH_AT91)	+= at91-sama5d3_xplained.dtb
 dtb-$(CONFIG_ARCH_AT91)	+= sama5d31ek.dtb
 dtb-$(CONFIG_ARCH_AT91)	+= sama5d33ek.dtb
 dtb-$(CONFIG_ARCH_AT91)	+= sama5d34ek.dtb

arch/arm/boot/dts/at91-sama5d3_xplained.dts

@@ -0,0 +1,229 @@
+/*
+ * at91-sama5d3_xplained.dts - Device Tree file for the SAMA5D3 Xplained board
+ *
+ *  Copyright (C) 2014 Atmel,
+ *		  2014 Nicolas Ferre <nicolas.ferre@atmel.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+/dts-v1/;
+#include "sama5d36.dtsi"
+
+/ {
+	model = "SAMA5D3 Xplained";
+	compatible = "atmel,sama5d3-xplained", "atmel,sama5d3", "atmel,sama5";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
+
+	memory {
+		reg = <0x20000000 0x10000000>;
+	};
+
+	ahb {
+		apb {
+			mmc0: mmc@f0000000 {
+				pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_dat4_7 &pinctrl_mmc0_cd>;
+				status = "okay";
+				slot@0 {
+					reg = <0>;
+					bus-width = <8>;
+					cd-gpios = <&pioE 0 GPIO_ACTIVE_LOW>;
+				};
+			};
+
+			spi0: spi@f0004000 {
+				cs-gpios = <&pioD 13 0>;
+				status = "okay";
+			};
+
+			can0: can@f000c000 {
+				status = "okay";
+			};
+
+			i2c0: i2c@f0014000 {
+				status = "okay";
+			};
+
+			i2c1: i2c@f0018000 {
+				status = "okay";
+			};
+
+			macb0: ethernet@f0028000 {
+				phy-mode = "rgmii";
+				status = "okay";
+			};
+
+			usart0: serial@f001c000 {
+				status = "okay";
+			};
+
+			usart1: serial@f0020000 {
+				pinctrl-0 = <&pinctrl_usart1 &pinctrl_usart1_rts_cts>;
+				status = "okay";
+			};
+
+			uart0: serial@f0024000 {
+				status = "okay";
+			};
+
+			mmc1: mmc@f8000000 {
+				pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3 &pinctrl_mmc1_cd>;
+				status = "okay";
+				slot@0 {
+					reg = <0>;
+					bus-width = <4>;
+					cd-gpios = <&pioE 1 GPIO_ACTIVE_HIGH>;
+				};
+			};
+
+			spi1: spi@f8008000 {
+				cs-gpios = <&pioC 25 0>, <0>, <0>, <&pioD 16 0>;
+				status = "okay";
+			};
+
+			adc0: adc@f8018000 {
+				pinctrl-0 = <
+					&pinctrl_adc0_adtrg
+					&pinctrl_adc0_ad0
+					&pinctrl_adc0_ad1
+					&pinctrl_adc0_ad2
+					&pinctrl_adc0_ad3
+					&pinctrl_adc0_ad4
+					&pinctrl_adc0_ad5
+					&pinctrl_adc0_ad6
+					&pinctrl_adc0_ad7
+					&pinctrl_adc0_ad8
+					&pinctrl_adc0_ad9
+					>;
+				status = "okay";
+			};
+
+			i2c2: i2c@f801c000 {
+				dmas = <0>, <0>;	/* Do not use DMA for i2c2 */
+				status = "okay";
+			};
+
+			macb1: ethernet@f802c000 {
+				phy-mode = "rmii";
+				status = "okay";
+			};
+
+			dbgu: serial@ffffee00 {
+				status = "okay";
+			};
+
+			pinctrl@fffff200 {
+				board {
+					pinctrl_mmc0_cd: mmc0_cd {
+						atmel,pins =
+							<AT91_PIOE 0 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+					};
+
+					pinctrl_mmc1_cd: mmc1_cd {
+						atmel,pins =
+							<AT91_PIOE 1 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+					};
+
+					pinctrl_usba_vbus: usba_vbus {
+						atmel,pins =
+							<AT91_PIOE 9 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;	/* PE9, conflicts with A9 */
+					};
+				};
+			};
+
+			pmc: pmc@fffffc00 {
+				main: mainck {
+					clock-frequency = <12000000>;
+				};
+			};
+		};
+
+		nand0: nand@60000000 {
+			nand-bus-width = <8>;
+			nand-ecc-mode = "hw";
+			atmel,has-pmecc;
+			atmel,pmecc-cap = <4>;
+			atmel,pmecc-sector-size = <512>;
+			nand-on-flash-bbt;
+			status = "okay";
+
+			at91bootstrap@0 {
+				label = "at91bootstrap";
+				reg = <0x0 0x40000>;
+			};
+
+			bootloader@40000 {
+				label = "bootloader";
+				reg = <0x40000 0x80000>;
+			};
+
+			bootloaderenv@c0000 {
+				label = "bootloader env";
+				reg = <0xc0000 0xc0000>;
+			};
+
+			dtb@180000 {
+				label = "device tree";
+				reg = <0x180000 0x80000>;
+			};
+
+			kernel@200000 {
+				label = "kernel";
+				reg = <0x200000 0x600000>;
+			};
+
+			rootfs@800000 {
+				label = "rootfs";
+				reg = <0x800000 0x0f800000>;
+			};
+		};
+
+		usb0: gadget@00500000 {
+			atmel,vbus-gpio = <&pioE 9 GPIO_ACTIVE_HIGH>;	/* PE9, conflicts with A9 */
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usba_vbus>;
+			status = "okay";
+		};
+
+		usb1: ohci@00600000 {
+			num-ports = <3>;
+			atmel,vbus-gpio = <0
+					   &pioE 3 GPIO_ACTIVE_LOW
+					   &pioE 4 GPIO_ACTIVE_LOW
+					  >;
+			status = "okay";
+		};
+
+		usb2: ehci@00700000 {
+			status = "okay";
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		bp3 {
+			label = "PB_USER";
+			gpios = <&pioE 29 GPIO_ACTIVE_LOW>;
+			linux,code = <0x104>;
+			gpio-key,wakeup;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		d2 {
+			label = "d2";
+			gpios = <&pioE 23 GPIO_ACTIVE_LOW>;	/* PE23, conflicts with A23, CTS2 */
+			linux,default-trigger = "heartbeat";
+		};
+
+		d3 {
+			label = "d3";
+			gpios = <&pioE 24 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};

arch/arm/boot/dts/at91sam9263.dtsi

@@ -523,7 +523,7 @@
 			};
 
 			i2c0: i2c@fff88000 {
-				compatible = "atmel,at91sam9263-i2c";
+				compatible = "atmel,at91sam9260-i2c";
 				reg = <0xfff88000 0x100>;
 				interrupts = <13 IRQ_TYPE_LEVEL_HIGH 6>;
 				#address-cells = <1>;

arch/arm/boot/dts/at91sam9n12ek.dts

@@ -124,6 +124,10 @@
 			nand-on-flash-bbt;
 			status = "okay";
 		};
+
+		usb0: ohci@00500000 {
+			status = "okay";
+		};
 	};
 
 	leds {

arch/arm/boot/dts/sama5d3.dtsi

@@ -1228,7 +1228,7 @@
 			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
 			reg = <0x00600000 0x100000>;
 			interrupts = <32 IRQ_TYPE_LEVEL_HIGH 2>;
-			clocks = <&usb>, <&uhphs_clk>, <&udphs_clk>,
+			clocks = <&usb>, <&uhphs_clk>, <&uhphs_clk>,
 				 <&uhpck>;
 			clock-names = "usb_clk", "ohci_clk", "hclk", "uhpck";
 			status = "disabled";

arch/arm/boot/dts/ste-href.dtsi

@@ -188,7 +188,6 @@
 		msp2: msp@80117000 {
 			pinctrl-names = "default";
 			pinctrl-0 = <&msp2_default_mode>;
-			status = "okay";
 		};
 
 		msp3: msp@80125000 {

arch/arm/boot/dts/sun4i-a10.dtsi

@@ -315,7 +315,7 @@
 		ranges;
 
 		emac: ethernet@01c0b000 {
-			compatible = "allwinner,sun4i-emac";
+			compatible = "allwinner,sun4i-a10-emac";
 			reg = <0x01c0b000 0x1000>;
 			interrupts = <55>;
 			clocks = <&ahb_gates 17>;
@@ -323,7 +323,7 @@
 		};
 
 		mdio@01c0b080 {
-			compatible = "allwinner,sun4i-mdio";
+			compatible = "allwinner,sun4i-a10-mdio";
 			reg = <0x01c0b080 0x14>;
 			status = "disabled";
 			#address-cells = <1>;

arch/arm/boot/dts/sun5i-a10s.dtsi

@@ -278,7 +278,7 @@
 		ranges;
 
 		emac: ethernet@01c0b000 {
-			compatible = "allwinner,sun4i-emac";
+			compatible = "allwinner,sun4i-a10-emac";
 			reg = <0x01c0b000 0x1000>;
 			interrupts = <55>;
 			clocks = <&ahb_gates 17>;
@@ -286,7 +286,7 @@
 		};
 
 		mdio@01c0b080 {
-			compatible = "allwinner,sun4i-mdio";
+			compatible = "allwinner,sun4i-a10-mdio";
 			reg = <0x01c0b080 0x14>;
 			status = "disabled";
 			#address-cells = <1>;

arch/arm/boot/dts/sun7i-a20.dtsi

@@ -340,7 +340,7 @@
 		ranges;
 
 		emac: ethernet@01c0b000 {
-			compatible = "allwinner,sun4i-emac";
+			compatible = "allwinner,sun4i-a10-emac";
 			reg = <0x01c0b000 0x1000>;
 			interrupts = <0 55 4>;
 			clocks = <&ahb_gates 17>;
@@ -348,7 +348,7 @@
 		};
 
 		mdio@01c0b080 {
-			compatible = "allwinner,sun4i-mdio";
+			compatible = "allwinner,sun4i-a10-mdio";
 			reg = <0x01c0b080 0x14>;
 			status = "disabled";
 			#address-cells = <1>;

arch/arm/configs/multi_v7_defconfig

@@ -29,6 +29,7 @@ CONFIG_ARCH_OMAP3=y
 CONFIG_ARCH_OMAP4=y
 CONFIG_SOC_OMAP5=y
 CONFIG_SOC_AM33XX=y
+CONFIG_SOC_DRA7XX=y
 CONFIG_SOC_AM43XX=y
 CONFIG_ARCH_ROCKCHIP=y
 CONFIG_ARCH_SOCFPGA=y

arch/arm/mach-hisi/Kconfig

@@ -8,7 +8,7 @@ config ARCH_HI3xxx
 	select CLKSRC_OF
 	select GENERIC_CLOCKEVENTS
 	select HAVE_ARM_SCU
-	select HAVE_ARM_TWD
+	select HAVE_ARM_TWD if SMP
 	select HAVE_SMP
 	select PINCTRL
 	select PINCTRL_SINGLE

arch/arm/mach-imx/clk-imx6q.c

@@ -482,6 +482,9 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
 	if (IS_ENABLED(CONFIG_PCI_IMX6))
 		clk_set_parent(clk[lvds1_sel], clk[sata_ref]);
 
+	/* Set initial power mode */
+	imx6q_set_lpm(WAIT_CLOCKED);
+
 	np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-gpt");
 	base = of_iomap(np, 0);
 	WARN_ON(!base);

arch/arm/mach-imx/clk-imx6sl.c

@@ -266,6 +266,9 @@ static void __init imx6sl_clocks_init(struct device_node *ccm_node)
 	/* Audio-related clocks configuration */
 	clk_set_parent(clks[IMX6SL_CLK_SPDIF0_SEL], clks[IMX6SL_CLK_PLL3_PFD3]);
 
+	/* Set initial power mode */
+	imx6q_set_lpm(WAIT_CLOCKED);
+
 	np = of_find_compatible_node(NULL, NULL, "fsl,imx6sl-gpt");
 	base = of_iomap(np, 0);
 	WARN_ON(!base);

arch/arm/mach-imx/pm-imx6q.c

@@ -236,8 +236,6 @@ void __init imx6q_pm_init(void)
 		regmap_update_bits(gpr, IOMUXC_GPR1, IMX6Q_GPR1_GINT,
 				   IMX6Q_GPR1_GINT);
 
-	/* Set initial power mode */
-	imx6q_set_lpm(WAIT_CLOCKED);
 
 	suspend_set_ops(&imx6q_pm_ops);
 }

arch/arm/mach-moxart/Kconfig

@@ -2,7 +2,6 @@ config ARCH_MOXART
 	bool "MOXA ART SoC" if ARCH_MULTI_V4T
 	select CPU_FA526
 	select ARM_DMA_MEM_BUFFERABLE
-	select DMA_OF
 	select USE_OF
 	select CLKSRC_OF
 	select CLKSRC_MMIO

arch/arm/mach-omap2/Kconfig

@@ -54,7 +54,7 @@ config SOC_OMAP5
 	select ARM_GIC
 	select CPU_V7
 	select HAVE_ARM_SCU if SMP
-	select HAVE_ARM_TWD if LOCAL_TIMERS
+	select HAVE_ARM_TWD if SMP
 	select HAVE_SMP
 	select HAVE_ARM_ARCH_TIMER
 	select ARM_ERRATA_798181 if SMP

arch/arm/mach-pxa/am300epd.c

@@ -30,6 +30,7 @@
 
 #include <mach/gumstix.h>
 #include <mach/mfp-pxa25x.h>
+#include <mach/irqs.h>
 #include <linux/platform_data/video-pxafb.h>
 
 #include "generic.h"

arch/arm/mach-pxa/include/mach/balloon3.h

@@ -14,6 +14,8 @@
 #ifndef ASM_ARCH_BALLOON3_H
 #define ASM_ARCH_BALLOON3_H
 
+#include "irqs.h" /* PXA_NR_BUILTIN_GPIO */
+
 enum balloon3_features {
 	BALLOON3_FEATURE_OHCI,
 	BALLOON3_FEATURE_MMC,

arch/arm/mach-pxa/include/mach/corgi.h

@@ -13,6 +13,7 @@
 #ifndef __ASM_ARCH_CORGI_H
 #define __ASM_ARCH_CORGI_H  1
 
+#include "irqs.h" /* PXA_NR_BUILTIN_GPIO */
 
 /*
  * Corgi (Non Standard) GPIO Definitions

arch/arm/mach-pxa/include/mach/csb726.h

@@ -11,6 +11,8 @@
 #ifndef CSB726_H
 #define CSB726_H
 
+#include "irqs.h" /* PXA_GPIO_TO_IRQ */
+
 #define CSB726_GPIO_IRQ_LAN	52
 #define CSB726_GPIO_IRQ_SM501	53
 #define CSB726_GPIO_MMC_DETECT	100

arch/arm/mach-pxa/include/mach/gumstix.h

@@ -6,6 +6,7 @@
  * published by the Free Software Foundation.
  */
 
+#include "irqs.h" /* PXA_GPIO_TO_IRQ */
 
 /* BTRESET - Reset line to Bluetooth module, active low signal. */
 #define GPIO_GUMSTIX_BTRESET          7

arch/arm/mach-pxa/include/mach/idp.h

@@ -23,6 +23,7 @@
  * IDP hardware.
  */
 
+#include "irqs.h" /* PXA_GPIO_TO_IRQ */
 
 #define IDP_FLASH_PHYS		(PXA_CS0_PHYS)
 #define IDP_ALT_FLASH_PHYS	(PXA_CS1_PHYS)

arch/arm/mach-pxa/include/mach/palmld.h

@@ -13,6 +13,8 @@
 #ifndef _INCLUDE_PALMLD_H_
 #define _INCLUDE_PALMLD_H_
 
+#include "irqs.h" /* PXA_GPIO_TO_IRQ */
+
 /** HERE ARE GPIOs **/
 
 /* GPIOs */

arch/arm/mach-pxa/include/mach/palmt5.h

@@ -15,6 +15,8 @@
 #ifndef _INCLUDE_PALMT5_H_
 #define _INCLUDE_PALMT5_H_
 
+#include "irqs.h" /* PXA_GPIO_TO_IRQ */
+
 /** HERE ARE GPIOs **/
 
 /* GPIOs */

arch/arm/mach-pxa/include/mach/palmtc.h

@@ -16,6 +16,8 @@
 #ifndef _INCLUDE_PALMTC_H_
 #define _INCLUDE_PALMTC_H_
 
+#include "irqs.h" /* PXA_GPIO_TO_IRQ */
+
 /** HERE ARE GPIOs **/
 
 /* GPIOs */

arch/arm/mach-pxa/include/mach/palmtx.h

@@ -16,6 +16,8 @@
 #ifndef _INCLUDE_PALMTX_H_
 #define _INCLUDE_PALMTX_H_
 
+#include "irqs.h" /* PXA_GPIO_TO_IRQ */
+
 /** HERE ARE GPIOs **/
 
 /* GPIOs */

arch/arm/mach-pxa/include/mach/pcm027.h

@@ -23,6 +23,8 @@
  * Definitions of CPU card resources only
  */
 
+#include "irqs.h" /* PXA_GPIO_TO_IRQ */
+
 /* phyCORE-PXA270 (PCM027) Interrupts */
 #define PCM027_IRQ(x)          (IRQ_BOARD_START + (x))
 #define PCM027_BTDET_IRQ       PCM027_IRQ(0)

arch/arm/mach-pxa/include/mach/pcm990_baseboard.h

@@ -20,6 +20,7 @@
  */
 
 #include <mach/pcm027.h>
+#include "irqs.h" /* PXA_GPIO_TO_IRQ */
 
 /*
  * definitions relevant only when the PCM-990

arch/arm/mach-pxa/include/mach/poodle.h

@@ -15,6 +15,8 @@
 #ifndef __ASM_ARCH_POODLE_H
 #define __ASM_ARCH_POODLE_H  1
 
+#include "irqs.h" /* PXA_GPIO_TO_IRQ */
+
 /*
  * GPIOs
  */

arch/arm/mach-pxa/include/mach/spitz.h

@@ -15,8 +15,8 @@
 #define __ASM_ARCH_SPITZ_H  1
 #endif
 
+#include "irqs.h" /* PXA_NR_BUILTIN_GPIO, PXA_GPIO_TO_IRQ */
 #include <linux/fb.h>
-#include <linux/gpio.h>
 
 /* Spitz/Akita GPIOs */
 

arch/arm/mach-pxa/include/mach/tosa.h

@@ -13,6 +13,8 @@
 #ifndef _ASM_ARCH_TOSA_H_
 #define _ASM_ARCH_TOSA_H_ 1
 
+#include "irqs.h" /* PXA_NR_BUILTIN_GPIO */
+
 /*  TOSA Chip selects  */
 #define TOSA_LCDC_PHYS		PXA_CS4_PHYS
 /* Internel Scoop */

arch/arm/mach-pxa/include/mach/trizeps4.h

@@ -10,6 +10,8 @@
 #ifndef _TRIPEPS4_H_
 #define _TRIPEPS4_H_
 
+#include "irqs.h" /* PXA_GPIO_TO_IRQ */
+
 /* physical memory regions */
 #define TRIZEPS4_FLASH_PHYS	(PXA_CS0_PHYS)  /* Flash region */
 #define TRIZEPS4_DISK_PHYS	(PXA_CS1_PHYS)  /* Disk On Chip region */

arch/arm/mach-shmobile/Kconfig

@@ -8,7 +8,7 @@ config ARCH_SHMOBILE_MULTI
 	select CPU_V7
 	select GENERIC_CLOCKEVENTS
 	select HAVE_ARM_SCU if SMP
-	select HAVE_ARM_TWD if LOCAL_TIMERS
+	select HAVE_ARM_TWD if SMP
 	select HAVE_SMP
 	select ARM_GIC
 	select MIGHT_HAVE_CACHE_L2X0

arch/arm/mach-zynq/common.c

@@ -25,6 +25,7 @@
 #include <linux/of_irq.h>
 #include <linux/of_platform.h>
 #include <linux/of.h>
+#include <linux/memblock.h>
 #include <linux/irqchip.h>
 #include <linux/irqchip/arm-gic.h>
 
@@ -41,6 +42,18 @@
 
 void __iomem *zynq_scu_base;
 
+/**
+ * zynq_memory_init - Initialize special memory
+ *
+ * We need to stop things allocating the low memory as DMA can't work in
+ * the 1st 512K of memory.
+ */
+static void __init zynq_memory_init(void)
+{
+	if (!__pa(PAGE_OFFSET))
+		memblock_reserve(__pa(PAGE_OFFSET), __pa(swapper_pg_dir));
+}
+
 static struct platform_device zynq_cpuidle_device = {
 	.name = "cpuidle-zynq",
 };
@@ -117,5 +130,6 @@ DT_MACHINE_START(XILINX_EP107, "Xilinx Zynq Platform")
 	.init_machine	= zynq_init_machine,
 	.init_time	= zynq_timer_init,
 	.dt_compat	= zynq_dt_match,
+	.reserve	= zynq_memory_init,
 	.restart	= zynq_system_reset,
 MACHINE_END

arch/arm64/Kconfig

@@ -36,6 +36,7 @@ config ARM64
 	select HAVE_GENERIC_DMA_COHERENT
 	select HAVE_HW_BREAKPOINT if PERF_EVENTS
 	select HAVE_MEMBLOCK
+	select HAVE_PATA_PLATFORM
 	select HAVE_PERF_EVENTS
 	select IRQ_DOMAIN
 	select MODULES_USE_ELF_RELA

arch/arm64/configs/defconfig

@@ -1,4 +1,3 @@
-CONFIG_EXPERIMENTAL=y
 # CONFIG_LOCALVERSION_AUTO is not set
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
@@ -19,6 +18,7 @@ CONFIG_BLK_DEV_INITRD=y
 CONFIG_KALLSYMS_ALL=y
 # CONFIG_COMPAT_BRK is not set
 CONFIG_PROFILING=y
+CONFIG_JUMP_LABEL=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_BLK_DEV_BSG is not set
@@ -27,6 +27,7 @@ CONFIG_ARCH_VEXPRESS=y
 CONFIG_ARCH_XGENE=y
 CONFIG_SMP=y
 CONFIG_PREEMPT=y
+CONFIG_CMA=y
 CONFIG_CMDLINE="console=ttyAMA0"
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 CONFIG_COMPAT=y
@@ -42,14 +43,17 @@ CONFIG_IP_PNP_BOOTP=y
 # CONFIG_WIRELESS is not set
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_DEVTMPFS=y
-CONFIG_BLK_DEV=y
+CONFIG_DMA_CMA=y
 CONFIG_SCSI=y
 # CONFIG_SCSI_PROC_FS is not set
 CONFIG_BLK_DEV_SD=y
 # CONFIG_SCSI_LOWLEVEL is not set
+CONFIG_ATA=y
+CONFIG_PATA_PLATFORM=y
+CONFIG_PATA_OF_PLATFORM=y
 CONFIG_NETDEVICES=y
-CONFIG_MII=y
 CONFIG_SMC91X=y
+CONFIG_SMSC911X=y
 # CONFIG_WLAN is not set
 CONFIG_INPUT_EVDEV=y
 # CONFIG_SERIO_I8042 is not set
@@ -62,13 +66,19 @@ CONFIG_SERIAL_AMBA_PL011=y
 CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
 # CONFIG_HW_RANDOM is not set
 # CONFIG_HWMON is not set
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
 CONFIG_FB=y
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_MONO is not set
 # CONFIG_LOGO_LINUX_VGA16 is not set
-# CONFIG_USB_SUPPORT is not set
+CONFIG_USB=y
+CONFIG_USB_ISP1760_HCD=y
+CONFIG_USB_STORAGE=y
+CONFIG_MMC=y
+CONFIG_MMC_ARMMMCI=y
 # CONFIG_IOMMU_SUPPORT is not set
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y

arch/arm64/include/asm/atomic.h

@@ -54,8 +54,7 @@ static inline void atomic_add(int i, atomic_t *v)
 "	stxr	%w1, %w0, %2\n"
 "	cbnz	%w1, 1b"
 	: "=&r" (result), "=&r" (tmp), "+Q" (v->counter)
-	: "Ir" (i)
-	: "cc");
+	: "Ir" (i));
 }
 
 static inline int atomic_add_return(int i, atomic_t *v)
@@ -64,14 +63,15 @@ static inline int atomic_add_return(int i, atomic_t *v)
 	int result;
 
 	asm volatile("// atomic_add_return\n"
-"1:	ldaxr	%w0, %2\n"
+"1:	ldxr	%w0, %2\n"
 "	add	%w0, %w0, %w3\n"
 "	stlxr	%w1, %w0, %2\n"
 "	cbnz	%w1, 1b"
 	: "=&r" (result), "=&r" (tmp), "+Q" (v->counter)
 	: "Ir" (i)
-	: "cc", "memory");
+	: "memory");
 
+	smp_mb();
 	return result;
 }
 
@@ -86,8 +86,7 @@ static inline void atomic_sub(int i, atomic_t *v)
 "	stxr	%w1, %w0, %2\n"
 "	cbnz	%w1, 1b"
 	: "=&r" (result), "=&r" (tmp), "+Q" (v->counter)
-	: "Ir" (i)
-	: "cc");
+	: "Ir" (i));
 }
 
 static inline int atomic_sub_return(int i, atomic_t *v)
@@ -96,14 +95,15 @@ static inline int atomic_sub_return(int i, atomic_t *v)
 	int result;
 
 	asm volatile("// atomic_sub_return\n"
-"1:	ldaxr	%w0, %2\n"
+"1:	ldxr	%w0, %2\n"
 "	sub	%w0, %w0, %w3\n"
 "	stlxr	%w1, %w0, %2\n"
 "	cbnz	%w1, 1b"
 	: "=&r" (result), "=&r" (tmp), "+Q" (v->counter)
 	: "Ir" (i)
-	: "cc", "memory");
+	: "memory");
 
+	smp_mb();
 	return result;
 }
 
@@ -112,17 +112,20 @@ static inline int atomic_cmpxchg(atomic_t *ptr, int old, int new)
 	unsigned long tmp;
 	int oldval;
 
+	smp_mb();
+
 	asm volatile("// atomic_cmpxchg\n"
-"1:	ldaxr	%w1, %2\n"
+"1:	ldxr	%w1, %2\n"
 "	cmp	%w1, %w3\n"
 "	b.ne	2f\n"
-"	stlxr	%w0, %w4, %2\n"
+"	stxr	%w0, %w4, %2\n"
 "	cbnz	%w0, 1b\n"
 "2:"
 	: "=&r" (tmp), "=&r" (oldval), "+Q" (ptr->counter)
 	: "Ir" (old), "r" (new)
-	: "cc", "memory");
+	: "cc");
 
+	smp_mb();
 	return oldval;
 }
 
@@ -173,8 +176,7 @@ static inline void atomic64_add(u64 i, atomic64_t *v)
 "	stxr	%w1, %0, %2\n"
 "	cbnz	%w1, 1b"
 	: "=&r" (result), "=&r" (tmp), "+Q" (v->counter)
-	: "Ir" (i)
-	: "cc");
+	: "Ir" (i));
 }
 
 static inline long atomic64_add_return(long i, atomic64_t *v)
@@ -183,14 +185,15 @@ static inline long atomic64_add_return(long i, atomic64_t *v)
 	unsigned long tmp;
 
 	asm volatile("// atomic64_add_return\n"
-"1:	ldaxr	%0, %2\n"
+"1:	ldxr	%0, %2\n"
 "	add	%0, %0, %3\n"
 "	stlxr	%w1, %0, %2\n"
 "	cbnz	%w1, 1b"
 	: "=&r" (result), "=&r" (tmp), "+Q" (v->counter)
 	: "Ir" (i)
-	: "cc", "memory");
+	: "memory");
 
+	smp_mb();
 	return result;
 }
 
@@ -205,8 +208,7 @@ static inline void atomic64_sub(u64 i, atomic64_t *v)
 "	stxr	%w1, %0, %2\n"
 "	cbnz	%w1, 1b"
 	: "=&r" (result), "=&r" (tmp), "+Q" (v->counter)
-	: "Ir" (i)
-	: "cc");
+	: "Ir" (i));
 }
 
 static inline long atomic64_sub_return(long i, atomic64_t *v)
@@ -215,14 +217,15 @@ static inline long atomic64_sub_return(long i, atomic64_t *v)
 	unsigned long tmp;
 
 	asm volatile("// atomic64_sub_return\n"
-"1:	ldaxr	%0, %2\n"
+"1:	ldxr	%0, %2\n"
 "	sub	%0, %0, %3\n"
 "	stlxr	%w1, %0, %2\n"
 "	cbnz	%w1, 1b"
 	: "=&r" (result), "=&r" (tmp), "+Q" (v->counter)
 	: "Ir" (i)
-	: "cc", "memory");
+	: "memory");
 
+	smp_mb();
 	return result;
 }
 
@@ -231,17 +234,20 @@ static inline long atomic64_cmpxchg(atomic64_t *ptr, long old, long new)
 	long oldval;
 	unsigned long res;
 
+	smp_mb();
+
 	asm volatile("// atomic64_cmpxchg\n"
-"1:	ldaxr	%1, %2\n"
+"1:	ldxr	%1, %2\n"
 "	cmp	%1, %3\n"
 "	b.ne	2f\n"
-"	stlxr	%w0, %4, %2\n"
+"	stxr	%w0, %4, %2\n"
 "	cbnz	%w0, 1b\n"
 "2:"
 	: "=&r" (res), "=&r" (oldval), "+Q" (ptr->counter)
 	: "Ir" (old), "r" (new)
-	: "cc", "memory");
+	: "cc");
 
+	smp_mb();
 	return oldval;
 }
 
@@ -253,11 +259,12 @@ static inline long atomic64_dec_if_positive(atomic64_t *v)
 	unsigned long tmp;
 
 	asm volatile("// atomic64_dec_if_positive\n"
-"1:	ldaxr	%0, %2\n"
+"1:	ldxr	%0, %2\n"
 "	subs	%0, %0, #1\n"
 "	b.mi	2f\n"
 "	stlxr	%w1, %0, %2\n"
 "	cbnz	%w1, 1b\n"
+"	dmb	ish\n"
 "2:"
 	: "=&r" (result), "=&r" (tmp), "+Q" (v->counter)
 	:

arch/arm64/include/asm/barrier.h

@@ -25,7 +25,7 @@
 #define wfi()		asm volatile("wfi" : : : "memory")
 
 #define isb()		asm volatile("isb" : : : "memory")
-#define dsb()		asm volatile("dsb sy" : : : "memory")
+#define dsb(opt)	asm volatile("dsb sy" : : : "memory")
 
 #define mb()		dsb()
 #define rmb()		asm volatile("dsb ld" : : : "memory")

arch/arm64/include/asm/cacheflush.h

@@ -116,6 +116,7 @@ extern void flush_dcache_page(struct page *);
 static inline void __flush_icache_all(void)
 {
 	asm("ic	ialluis");
+	dsb();
 }
 
 #define flush_dcache_mmap_lock(mapping) \

arch/arm64/include/asm/cmpxchg.h

@@ -29,44 +29,45 @@ static inline unsigned long __xchg(unsigned long x, volatile void *ptr, int size
 	switch (size) {
 	case 1:
 		asm volatile("//	__xchg1\n"
-		"1:	ldaxrb	%w0, %2\n"
+		"1:	ldxrb	%w0, %2\n"
 		"	stlxrb	%w1, %w3, %2\n"
 		"	cbnz	%w1, 1b\n"
 			: "=&r" (ret), "=&r" (tmp), "+Q" (*(u8 *)ptr)
 			: "r" (x)
-			: "cc", "memory");
+			: "memory");
 		break;
 	case 2:
 		asm volatile("//	__xchg2\n"
-		"1:	ldaxrh	%w0, %2\n"
+		"1:	ldxrh	%w0, %2\n"
 		"	stlxrh	%w1, %w3, %2\n"
 		"	cbnz	%w1, 1b\n"
 			: "=&r" (ret), "=&r" (tmp), "+Q" (*(u16 *)ptr)
 			: "r" (x)
-			: "cc", "memory");
+			: "memory");
 		break;
 	case 4:
 		asm volatile("//	__xchg4\n"
-		"1:	ldaxr	%w0, %2\n"
+		"1:	ldxr	%w0, %2\n"
 		"	stlxr	%w1, %w3, %2\n"
 		"	cbnz	%w1, 1b\n"
 			: "=&r" (ret), "=&r" (tmp), "+Q" (*(u32 *)ptr)
 			: "r" (x)
-			: "cc", "memory");
+			: "memory");
 		break;
 	case 8:
 		asm volatile("//	__xchg8\n"
-		"1:	ldaxr	%0, %2\n"
+		"1:	ldxr	%0, %2\n"
 		"	stlxr	%w1, %3, %2\n"
 		"	cbnz	%w1, 1b\n"
 			: "=&r" (ret), "=&r" (tmp), "+Q" (*(u64 *)ptr)
 			: "r" (x)
-			: "cc", "memory");
+			: "memory");
 		break;
 	default:
 		BUILD_BUG();
 	}
 
+	smp_mb();
 	return ret;
 }
 

arch/arm64/include/asm/esr.h

@@ -42,7 +42,7 @@
 #define ESR_EL1_EC_SP_ALIGN	(0x26)
 #define ESR_EL1_EC_FP_EXC32	(0x28)
 #define ESR_EL1_EC_FP_EXC64	(0x2C)
-#define ESR_EL1_EC_SERRROR	(0x2F)
+#define ESR_EL1_EC_SERROR	(0x2F)
 #define ESR_EL1_EC_BREAKPT_EL0	(0x30)
 #define ESR_EL1_EC_BREAKPT_EL1	(0x31)
 #define ESR_EL1_EC_SOFTSTP_EL0	(0x32)

arch/arm64/include/asm/futex.h

@@ -24,10 +24,11 @@
 
 #define __futex_atomic_op(insn, ret, oldval, uaddr, tmp, oparg)		\
 	asm volatile(							\
-"1:	ldaxr	%w1, %2\n"						\
+"1:	ldxr	%w1, %2\n"						\
 	insn "\n"							\
 "2:	stlxr	%w3, %w0, %2\n"						\
 "	cbnz	%w3, 1b\n"						\
+"	dmb	ish\n"							\
 "3:\n"									\
 "	.pushsection .fixup,\"ax\"\n"					\
 "	.align	2\n"							\
@@ -40,7 +41,7 @@
 "	.popsection\n"							\
 	: "=&r" (ret), "=&r" (oldval), "+Q" (*uaddr), "=&r" (tmp)	\
 	: "r" (oparg), "Ir" (-EFAULT)					\
-	: "cc", "memory")
+	: "memory")
 
 static inline int
 futex_atomic_op_inuser (int encoded_op, u32 __user *uaddr)
@@ -111,11 +112,12 @@ futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr,
 		return -EFAULT;
 
 	asm volatile("// futex_atomic_cmpxchg_inatomic\n"
-"1:	ldaxr	%w1, %2\n"
+"1:	ldxr	%w1, %2\n"
 "	sub	%w3, %w1, %w4\n"
 "	cbnz	%w3, 3f\n"
 "2:	stlxr	%w3, %w5, %2\n"
 "	cbnz	%w3, 1b\n"
+"	dmb	ish\n"
 "3:\n"
 "	.pushsection .fixup,\"ax\"\n"
 "4:	mov	%w0, %w6\n"
@@ -127,7 +129,7 @@ futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr,
 "	.popsection\n"
 	: "+r" (ret), "=&r" (val), "+Q" (*uaddr), "=&r" (tmp)
 	: "r" (oldval), "r" (newval), "Ir" (-EFAULT)
-	: "cc", "memory");
+	: "memory");
 
 	*uval = val;
 	return ret;

arch/arm64/include/asm/kvm_arm.h

@@ -231,7 +231,7 @@
 #define ESR_EL2_EC_SP_ALIGN	(0x26)
 #define ESR_EL2_EC_FP_EXC32	(0x28)
 #define ESR_EL2_EC_FP_EXC64	(0x2C)
-#define ESR_EL2_EC_SERRROR	(0x2F)
+#define ESR_EL2_EC_SERROR	(0x2F)
 #define ESR_EL2_EC_BREAKPT	(0x30)
 #define ESR_EL2_EC_BREAKPT_HYP	(0x31)
 #define ESR_EL2_EC_SOFTSTP	(0x32)

arch/arm64/include/asm/spinlock.h

@@ -132,7 +132,7 @@ static inline void arch_write_lock(arch_rwlock_t *rw)
 	"	cbnz	%w0, 2b\n"
 	: "=&r" (tmp), "+Q" (rw->lock)
 	: "r" (0x80000000)
-	: "cc", "memory");
+	: "memory");
 }
 
 static inline int arch_write_trylock(arch_rwlock_t *rw)
@@ -146,7 +146,7 @@ static inline int arch_write_trylock(arch_rwlock_t *rw)
 	"1:\n"
 	: "=&r" (tmp), "+Q" (rw->lock)
 	: "r" (0x80000000)
-	: "cc", "memory");
+	: "memory");
 
 	return !tmp;
 }
@@ -187,7 +187,7 @@ static inline void arch_read_lock(arch_rwlock_t *rw)
 	"	cbnz	%w1, 2b\n"
 	: "=&r" (tmp), "=&r" (tmp2), "+Q" (rw->lock)
 	:
-	: "cc", "memory");
+	: "memory");
 }
 
 static inline void arch_read_unlock(arch_rwlock_t *rw)
@@ -201,7 +201,7 @@ static inline void arch_read_unlock(arch_rwlock_t *rw)
 	"	cbnz	%w1, 1b\n"
 	: "=&r" (tmp), "=&r" (tmp2), "+Q" (rw->lock)
 	:
-	: "cc", "memory");
+	: "memory");
 }
 
 static inline int arch_read_trylock(arch_rwlock_t *rw)
@@ -216,7 +216,7 @@ static inline int arch_read_trylock(arch_rwlock_t *rw)
 	"1:\n"
 	: "=&r" (tmp), "+r" (tmp2), "+Q" (rw->lock)
 	:
-	: "cc", "memory");
+	: "memory");
 
 	return !tmp2;
 }

arch/arm64/include/asm/unistd32.h

@@ -399,7 +399,10 @@ __SYSCALL(374, compat_sys_sendmmsg)
 __SYSCALL(375, sys_setns)
 __SYSCALL(376, compat_sys_process_vm_readv)
 __SYSCALL(377, compat_sys_process_vm_writev)
-__SYSCALL(378, sys_ni_syscall)			/* 378 for kcmp */
+__SYSCALL(378, sys_kcmp)
+__SYSCALL(379, sys_finit_module)
+__SYSCALL(380, sys_sched_setattr)
+__SYSCALL(381, sys_sched_getattr)
 
 #define __NR_compat_syscalls		379
 

arch/arm64/include/uapi/asm/kvm.h

@@ -148,6 +148,15 @@ struct kvm_arch_memory_slot {
 #define KVM_REG_ARM_TIMER_CNT		ARM64_SYS_REG(3, 3, 14, 3, 2)
 #define KVM_REG_ARM_TIMER_CVAL		ARM64_SYS_REG(3, 3, 14, 0, 2)
 
+/* Device Control API: ARM VGIC */
+#define KVM_DEV_ARM_VGIC_GRP_ADDR	0
+#define KVM_DEV_ARM_VGIC_GRP_DIST_REGS	1
+#define KVM_DEV_ARM_VGIC_GRP_CPU_REGS	2
+#define   KVM_DEV_ARM_VGIC_CPUID_SHIFT	32
+#define   KVM_DEV_ARM_VGIC_CPUID_MASK	(0xffULL << KVM_DEV_ARM_VGIC_CPUID_SHIFT)
+#define   KVM_DEV_ARM_VGIC_OFFSET_SHIFT	0
+#define   KVM_DEV_ARM_VGIC_OFFSET_MASK	(0xffffffffULL << KVM_DEV_ARM_VGIC_OFFSET_SHIFT)
+
 /* KVM_IRQ_LINE irq field index values */
 #define KVM_ARM_IRQ_TYPE_SHIFT		24
 #define KVM_ARM_IRQ_TYPE_MASK		0xff

arch/arm64/kernel/kuser32.S

@@ -38,12 +38,13 @@ __kuser_cmpxchg64:			// 0xffff0f60
 	.inst	0xe92d00f0		//	push		{r4, r5, r6, r7}
 	.inst	0xe1c040d0		//	ldrd		r4, r5, [r0]
 	.inst	0xe1c160d0		//	ldrd		r6, r7, [r1]
-	.inst	0xe1b20e9f		// 1:	ldaexd		r0, r1, [r2]
+	.inst	0xe1b20f9f		// 1:	ldrexd		r0, r1, [r2]
 	.inst	0xe0303004		//	eors		r3, r0, r4
 	.inst	0x00313005		//	eoreqs		r3, r1, r5
 	.inst	0x01a23e96		//	stlexdeq	r3, r6, [r2]
 	.inst	0x03330001		//	teqeq		r3, #1
 	.inst	0x0afffff9		//	beq		1b
+	.inst	0xf57ff05b		//	dmb		ish
 	.inst	0xe2730000		//	rsbs		r0, r3, #0
 	.inst	0xe8bd00f0		//	pop		{r4, r5, r6, r7}
 	.inst	0xe12fff1e		//	bx		lr
@@ -55,11 +56,12 @@ __kuser_memory_barrier:			// 0xffff0fa0
 
 	.align	5
 __kuser_cmpxchg:			// 0xffff0fc0
-	.inst	0xe1923e9f		// 1:	ldaex		r3, [r2]
+	.inst	0xe1923f9f		// 1:	ldrex		r3, [r2]
 	.inst	0xe0533000		//	subs		r3, r3, r0
 	.inst	0x01823e91		//	stlexeq		r3, r1, [r2]
 	.inst	0x03330001		//	teqeq		r3, #1
 	.inst	0x0afffffa		//	beq		1b
+	.inst	0xf57ff05b		//	dmb		ish
 	.inst	0xe2730000		//	rsbs		r0, r3, #0
 	.inst	0xe12fff1e		//	bx		lr
 

arch/arm64/kernel/vdso.c

@@ -238,6 +238,8 @@ void update_vsyscall(struct timekeeper *tk)
 	vdso_data->use_syscall			= use_syscall;
 	vdso_data->xtime_coarse_sec		= xtime_coarse.tv_sec;
 	vdso_data->xtime_coarse_nsec		= xtime_coarse.tv_nsec;
+	vdso_data->wtm_clock_sec		= tk->wall_to_monotonic.tv_sec;
+	vdso_data->wtm_clock_nsec		= tk->wall_to_monotonic.tv_nsec;
 
 	if (!use_syscall) {
 		vdso_data->cs_cycle_last	= tk->clock->cycle_last;
@@ -245,8 +247,6 @@ void update_vsyscall(struct timekeeper *tk)
 		vdso_data->xtime_clock_nsec	= tk->xtime_nsec;
 		vdso_data->cs_mult		= tk->mult;
 		vdso_data->cs_shift		= tk->shift;
-		vdso_data->wtm_clock_sec	= tk->wall_to_monotonic.tv_sec;
-		vdso_data->wtm_clock_nsec	= tk->wall_to_monotonic.tv_nsec;
 	}
 
 	smp_wmb();

arch/arm64/kernel/vdso/Makefile

@@ -48,7 +48,7 @@ $(obj-vdso): %.o: %.S
 
 # Actual build commands
 quiet_cmd_vdsold = VDSOL $@
-      cmd_vdsold = $(CC) $(c_flags) -Wl,-T $^ -o $@
+      cmd_vdsold = $(CC) $(c_flags) -Wl,-n -Wl,-T $^ -o $@
 quiet_cmd_vdsoas = VDSOA $@
       cmd_vdsoas = $(CC) $(a_flags) -c -o $@ $<
 

arch/arm64/kernel/vdso/gettimeofday.S

@@ -103,6 +103,8 @@ ENTRY(__kernel_clock_gettime)
 	bl	__do_get_tspec
 	seqcnt_check w9, 1b
 
+	mov	x30, x2
+
 	cmp	w0, #CLOCK_MONOTONIC
 	b.ne	6f
 
@@ -118,6 +120,9 @@ ENTRY(__kernel_clock_gettime)
 	ccmp	w0, #CLOCK_MONOTONIC_COARSE, #0x4, ne
 	b.ne	8f
 
+	/* xtime_coarse_nsec is already right-shifted */
+	mov	x12, #0
+
 	/* Get coarse timespec. */
 	adr	vdso_data, _vdso_data
 3:	seqcnt_acquire
@@ -156,7 +161,7 @@ ENTRY(__kernel_clock_gettime)
 	lsr	x11, x11, x12
 	stp	x10, x11, [x1, #TSPEC_TV_SEC]
 	mov	x0, xzr
-	ret	x2
+	ret
 7:
 	mov	x30, x2
 8:	/* Syscall fallback. */

arch/arm64/lib/bitops.S

@@ -46,11 +46,12 @@ ENTRY(	\name	)
 	mov	x2, #1
 	add	x1, x1, x0, lsr #3	// Get word offset
 	lsl	x4, x2, x3		// Create mask
-1:	ldaxr	x2, [x1]
+1:	ldxr	x2, [x1]
 	lsr	x0, x2, x3		// Save old value of bit
 	\instr	x2, x2, x4		// toggle bit
 	stlxr	w5, x2, [x1]
 	cbnz	w5, 1b
+	dmb	ish
 	and	x0, x0, #1
 3:	ret
 ENDPROC(\name	)

arch/arm64/mm/dma-mapping.c

@@ -45,6 +45,7 @@ static void *arm64_swiotlb_alloc_coherent(struct device *dev, size_t size,
 	if (IS_ENABLED(CONFIG_DMA_CMA)) {
 		struct page *page;
 
+		size = PAGE_ALIGN(size);
 		page = dma_alloc_from_contiguous(dev, size >> PAGE_SHIFT,
 							get_order(size));
 		if (!page)

arch/arm64/mm/mmu.c

@@ -203,10 +203,18 @@ static void __init alloc_init_pmd(pud_t *pud, unsigned long addr,
 	do {
 		next = pmd_addr_end(addr, end);
 		/* try section mapping first */
-		if (((addr | next | phys) & ~SECTION_MASK) == 0)
+		if (((addr | next | phys) & ~SECTION_MASK) == 0) {
+			pmd_t old_pmd =*pmd;
 			set_pmd(pmd, __pmd(phys | prot_sect_kernel));
-		else
+			/*
+			 * Check for previous table entries created during
+			 * boot (__create_page_tables) and flush them.
+			 */
+			if (!pmd_none(old_pmd))
+				flush_tlb_all();
+		} else {
 			alloc_init_pte(pmd, addr, next, __phys_to_pfn(phys));
+		}
 		phys += next - addr;
 	} while (pmd++, addr = next, addr != end);
 }

arch/arm64/mm/pgd.c

@@ -32,17 +32,10 @@
 
 pgd_t *pgd_alloc(struct mm_struct *mm)
 {
-	pgd_t *new_pgd;
-
 	if (PGD_SIZE == PAGE_SIZE)
-		new_pgd = (pgd_t *)get_zeroed_page(GFP_KERNEL);
+		return (pgd_t *)get_zeroed_page(GFP_KERNEL);
 	else
-		new_pgd = kzalloc(PGD_SIZE, GFP_KERNEL);
-
-	if (!new_pgd)
-		return NULL;
-
-	return new_pgd;
+		return kzalloc(PGD_SIZE, GFP_KERNEL);
 }
 
 void pgd_free(struct mm_struct *mm, pgd_t *pgd)