arm64: dts: Add Designware I2C controller DTS entries for X-Gene v2 SoC platform

This patch adds DTS entries for Designware I2C controllers used in
APM X-Gene v2 evaluation platform (Merlin board).

X-Gene v2 has total 5 I2C controllers. On Merlin board only I2C1
and I2C4 controllers are available in Linux, where the other 3
controllers are used for management purpose (power management,
BMC function).

Signed-off-by: Duc Dang <dhdang@apm.com>

arch/arm64/boot/dts/apm/apm-shadowcat.dtsi

@@ -232,6 +232,18 @@
 				clock-output-names = "ahbclk";
 			};
 
+			sbapbclk: sbapbclk@1704c000 {
+				compatible = "apm,xgene-device-clock";
+				#clock-cells = <1>;
+				clocks = <&ahbclk 0>;
+				reg = <0x0 0x1704c000 0x0 0x2000>;
+				reg-names = "div-reg";
+				divider-offset = <0x10>;
+				divider-width = <0x2>;
+				divider-shift = <0x0>;
+				clock-output-names = "sbapbclk";
+			};
+
 			sdioclk: sdioclk@1f2ac000 {
 				compatible = "apm,xgene-device-clock";
 				#clock-cells = <1>;
@@ -301,6 +313,32 @@
 				enable-mask = <0x10>;
 				clock-output-names = "rngpkaclk";
 			};
+
+			i2c1clk: i2c1clk@17000000 {
+				compatible = "apm,xgene-device-clock";
+				#clock-cells = <1>;
+				clocks = <&sbapbclk 0>;
+				reg = <0x0 0x17000000 0x0 0x2000>;
+				reg-names = "csr-reg";
+				csr-offset = <0xc>;
+				csr-mask = <0x4>;
+				enable-offset = <0x10>;
+				enable-mask = <0x4>;
+				clock-output-names = "i2c1clk";
+			};
+
+			i2c4clk: i2c4clk@1704c000 {
+				compatible = "apm,xgene-device-clock";
+				#clock-cells = <1>;
+				clocks = <&sbapbclk 0>;
+				reg = <0x0 0x1704c000 0x0 0x1000>;
+				reg-names = "csr-reg";
+				csr-offset = <0x0>;
+				csr-mask = <0x40>;
+				enable-offset = <0x8>;
+				enable-mask = <0x40>;
+				clock-output-names = "i2c4clk";
+			};
 		};
 
 		scu: system-clk-controller@17000000 {
@@ -589,5 +627,26 @@
 			interrupts = <0x0 0x41 0x4>;
 			clocks = <&rngpkaclk 0>;
 		};
+
+		i2c1: i2c1@10511000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,designware-i2c";
+			reg = <0x0 0x10511000 0x0 0x1000>;
+			interrupts = <0 0x45 0x4>;
+			#clock-cells = <1>;
+			clocks = <&i2c1clk 0>;
+			bus_num = <1>;
+		};
+
+		i2c4: i2c4@10640000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,designware-i2c";
+			reg = <0x0 0x10640000 0x0 0x1000>;
+			interrupts = <0 0x3A 0x4>;
+			clocks = <&i2c4clk 0>;
+			bus_num = <4>;
+		};
 	};
 };