NFC: NCI: Add support of ISO15693

Update nci.h to respect latest NCI specification proposal
(stop using proprietary opcodes). Handle ISO15693 parameters
in NCI_RF_ACTIVATED_NTF handler.

Signed-off-by: Vincent Cuissard <cuissard@marvell.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

include/net/nfc/nci.h

@@ -2,6 +2,7 @@
  *  The NFC Controller Interface is the communication protocol between an
  *  NFC Controller (NFCC) and a Device Host (DH).
  *
+ *  Copyright (C) 2014 Marvell International Ltd.
  *  Copyright (C) 2011 Texas Instruments, Inc.
  *
  *  Written by Ilan Elias <ilane@ti.com>
@@ -65,19 +66,18 @@
 #define NCI_NFC_F_PASSIVE_POLL_MODE				0x02
 #define NCI_NFC_A_ACTIVE_POLL_MODE				0x03
 #define NCI_NFC_F_ACTIVE_POLL_MODE				0x05
-#define NCI_NFC_15693_PASSIVE_POLL_MODE				0x06
+#define NCI_NFC_V_PASSIVE_POLL_MODE				0x06
 #define NCI_NFC_A_PASSIVE_LISTEN_MODE				0x80
 #define NCI_NFC_B_PASSIVE_LISTEN_MODE				0x81
 #define NCI_NFC_F_PASSIVE_LISTEN_MODE				0x82
 #define NCI_NFC_A_ACTIVE_LISTEN_MODE				0x83
 #define NCI_NFC_F_ACTIVE_LISTEN_MODE				0x85
-#define NCI_NFC_15693_PASSIVE_LISTEN_MODE			0x86
 
 /* NCI RF Technologies */
 #define NCI_NFC_RF_TECHNOLOGY_A					0x00
 #define NCI_NFC_RF_TECHNOLOGY_B					0x01
 #define NCI_NFC_RF_TECHNOLOGY_F					0x02
-#define NCI_NFC_RF_TECHNOLOGY_15693				0x03
+#define NCI_NFC_RF_TECHNOLOGY_V					0x03
 
 /* NCI Bit Rates */
 #define NCI_NFC_BIT_RATE_106					0x00
@@ -87,6 +87,7 @@
 #define NCI_NFC_BIT_RATE_1695					0x04
 #define NCI_NFC_BIT_RATE_3390					0x05
 #define NCI_NFC_BIT_RATE_6780					0x06
+#define NCI_NFC_BIT_RATE_26					0x20
 
 /* NCI RF Protocols */
 #define NCI_RF_PROTOCOL_UNKNOWN					0x00
@@ -95,6 +96,7 @@
 #define NCI_RF_PROTOCOL_T3T					0x03
 #define NCI_RF_PROTOCOL_ISO_DEP					0x04
 #define NCI_RF_PROTOCOL_NFC_DEP					0x05
+#define NCI_RF_PROTOCOL_T5T					0x06
 
 /* NCI RF Interfaces */
 #define NCI_RF_INTERFACE_NFCEE_DIRECT				0x00
@@ -328,6 +330,12 @@ struct rf_tech_specific_params_nfcf_poll {
 	__u8	sensf_res[18];	/* 16 or 18 Bytes */
 } __packed;
 
+struct rf_tech_specific_params_nfcv_poll {
+	__u8	res_flags;
+	__u8	dsfid;
+	__u8	uid[8];	/* 8 Bytes */
+} __packed;
+
 struct nci_rf_discover_ntf {
 	__u8	rf_discovery_id;
 	__u8	rf_protocol;
@@ -338,6 +346,7 @@ struct nci_rf_discover_ntf {
 		struct rf_tech_specific_params_nfca_poll nfca_poll;
 		struct rf_tech_specific_params_nfcb_poll nfcb_poll;
 		struct rf_tech_specific_params_nfcf_poll nfcf_poll;
+		struct rf_tech_specific_params_nfcv_poll nfcv_poll;
 	} rf_tech_specific_params;
 
 	__u8	ntf_type;
@@ -372,6 +381,7 @@ struct nci_rf_intf_activated_ntf {
 		struct rf_tech_specific_params_nfca_poll nfca_poll;
 		struct rf_tech_specific_params_nfcb_poll nfcb_poll;
 		struct rf_tech_specific_params_nfcf_poll nfcf_poll;
+		struct rf_tech_specific_params_nfcv_poll nfcv_poll;
 	} rf_tech_specific_params;
 
 	__u8	data_exch_rf_tech_and_mode;

net/nfc/nci/core.c

@@ -231,6 +231,14 @@ static void nci_rf_discover_req(struct nci_dev *ndev, unsigned long opt)
 		cmd.num_disc_configs++;
 	}
 
+	if ((cmd.num_disc_configs < NCI_MAX_NUM_RF_CONFIGS) &&
+	    (protocols & NFC_PROTO_ISO15693_MASK)) {
+		cmd.disc_configs[cmd.num_disc_configs].rf_tech_and_mode =
+			NCI_NFC_V_PASSIVE_POLL_MODE;
+		cmd.disc_configs[cmd.num_disc_configs].frequency = 1;
+		cmd.num_disc_configs++;
+	}
+
 	nci_send_cmd(ndev, NCI_OP_RF_DISCOVER_CMD,
 		     (1 + (cmd.num_disc_configs * sizeof(struct disc_config))),
 		     &cmd);

net/nfc/nci/ntf.c

@@ -2,6 +2,7 @@
  *  The NFC Controller Interface is the communication protocol between an
  *  NFC Controller (NFCC) and a Device Host (DH).
  *
+ *  Copyright (C) 2014 Marvell International Ltd.
  *  Copyright (C) 2011 Texas Instruments, Inc.
  *
  *  Written by Ilan Elias <ilane@ti.com>
@@ -155,6 +156,17 @@ static __u8 *nci_extract_rf_params_nfcf_passive_poll(struct nci_dev *ndev,
 	return data;
 }
 
+static __u8 *nci_extract_rf_params_nfcv_passive_poll(struct nci_dev *ndev,
+			struct rf_tech_specific_params_nfcv_poll *nfcv_poll,
+						     __u8 *data)
+{
+	++data;
+	nfcv_poll->dsfid = *data++;
+	memcpy(nfcv_poll->uid, data, NFC_ISO15693_UID_MAXSIZE);
+	data += NFC_ISO15693_UID_MAXSIZE;
+	return data;
+}
+
 static int nci_add_new_protocol(struct nci_dev *ndev,
 				struct nfc_target *target,
 				__u8 rf_protocol,
@@ -164,6 +176,7 @@ static int nci_add_new_protocol(struct nci_dev *ndev,
 	struct rf_tech_specific_params_nfca_poll *nfca_poll;
 	struct rf_tech_specific_params_nfcb_poll *nfcb_poll;
 	struct rf_tech_specific_params_nfcf_poll *nfcf_poll;
+	struct rf_tech_specific_params_nfcv_poll *nfcv_poll;
 	__u32 protocol;
 
 	if (rf_protocol == NCI_RF_PROTOCOL_T1T)
@@ -179,6 +192,8 @@ static int nci_add_new_protocol(struct nci_dev *ndev,
 		protocol = NFC_PROTO_FELICA_MASK;
 	else if (rf_protocol == NCI_RF_PROTOCOL_NFC_DEP)
 		protocol = NFC_PROTO_NFC_DEP_MASK;
+	else if (rf_protocol == NCI_RF_PROTOCOL_T5T)
+		protocol = NFC_PROTO_ISO15693_MASK;
 	else
 		protocol = 0;
 
@@ -213,6 +228,12 @@ static int nci_add_new_protocol(struct nci_dev *ndev,
 			memcpy(target->sensf_res, nfcf_poll->sensf_res,
 			       target->sensf_res_len);
 		}
+	} else if (rf_tech_and_mode == NCI_NFC_V_PASSIVE_POLL_MODE) {
+		nfcv_poll = (struct rf_tech_specific_params_nfcv_poll *)params;
+
+		target->is_iso15693 = 1;
+		target->iso15693_dsfid = nfcv_poll->dsfid;
+		memcpy(target->iso15693_uid, nfcv_poll->uid, NFC_ISO15693_UID_MAXSIZE);
 	} else {
 		pr_err("unsupported rf_tech_and_mode 0x%x\n", rf_tech_and_mode);
 		return -EPROTO;
@@ -305,6 +326,11 @@ static void nci_rf_discover_ntf_packet(struct nci_dev *ndev,
 				&(ntf.rf_tech_specific_params.nfcf_poll), data);
 			break;
 
+		case NCI_NFC_V_PASSIVE_POLL_MODE:
+			data = nci_extract_rf_params_nfcv_passive_poll(ndev,
+				&(ntf.rf_tech_specific_params.nfcv_poll), data);
+			break;
+
 		default:
 			pr_err("unsupported rf_tech_and_mode 0x%x\n",
 			       ntf.rf_tech_and_mode);
@@ -455,6 +481,11 @@ static void nci_rf_intf_activated_ntf_packet(struct nci_dev *ndev,
 				&(ntf.rf_tech_specific_params.nfcf_poll), data);
 			break;
 
+		case NCI_NFC_V_PASSIVE_POLL_MODE:
+			data = nci_extract_rf_params_nfcv_passive_poll(ndev,
+				&(ntf.rf_tech_specific_params.nfcv_poll), data);
+			break;
+
 		default:
 			pr_err("unsupported activation_rf_tech_and_mode 0x%x\n",
 			       ntf.activation_rf_tech_and_mode);