mfd: rtsx: Add support for rts522A

rts522a(rts5227s) is derived from rts5227, and mainly same with rts5227.
Add it to file mfd/rts5227.c to support this chip.

Signed-off-by: Micky Ching <micky_ching@realsil.com.cn>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

drivers/mfd/Kconfig

@@ -736,9 +736,10 @@ config MFD_RTSX_PCI
 	select MFD_CORE
 	help
 	  This supports for Realtek PCI-Express card reader including rts5209,
-	  rts5229, rtl8411, etc. Realtek card reader supports access to many
-	  types of memory cards, such as Memory Stick, Memory Stick Pro,
-	  Secure Digital and MultiMediaCard.
+	  rts5227, rts522A, rts5229, rts5249, rts524A, rts525A, rtl8411, etc.
+	  Realtek card reader supports access to many types of memory cards,
+	  such as Memory Stick, Memory Stick Pro, Secure Digital and
+	  MultiMediaCard.
 
 config MFD_RT5033
 	tristate "Richtek RT5033 Power Management IC"

drivers/mfd/rts5227.c

@@ -26,6 +26,14 @@
 
 #include "rtsx_pcr.h"
 
+static u8 rts5227_get_ic_version(struct rtsx_pcr *pcr)
+{
+	u8 val;
+
+	rtsx_pci_read_register(pcr, DUMMY_REG_RESET_0, &val);
+	return val & 0x0F;
+}
+
 static void rts5227_fill_driving(struct rtsx_pcr *pcr, u8 voltage)
 {
 	u8 driving_3v3[4][3] = {
@@ -88,7 +96,7 @@ static void rts5227_force_power_down(struct rtsx_pcr *pcr, u8 pm_state)
 	rtsx_pci_write_register(pcr, AUTOLOAD_CFG_BASE + 3, 0x01, 0);
 
 	if (pm_state == HOST_ENTER_S3)
-		rtsx_pci_write_register(pcr, PM_CTRL3, 0x10, 0x10);
+		rtsx_pci_write_register(pcr, pcr->reg_pm_ctrl3, 0x10, 0x10);
 
 	rtsx_pci_write_register(pcr, FPDCTL, 0x03, 0x03);
 }
@@ -121,7 +129,7 @@ static int rts5227_extra_init_hw(struct rtsx_pcr *pcr)
 		rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, PETXCFG, 0xB8, 0xB8);
 	else
 		rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, PETXCFG, 0xB8, 0x88);
-	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, PM_CTRL3, 0x10, 0x00);
+	rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, pcr->reg_pm_ctrl3, 0x10, 0x00);
 
 	return rtsx_pci_send_cmd(pcr, 100);
 }
@@ -294,8 +302,73 @@ void rts5227_init_params(struct rtsx_pcr *pcr)
 	pcr->tx_initial_phase = SET_CLOCK_PHASE(27, 27, 15);
 	pcr->rx_initial_phase = SET_CLOCK_PHASE(30, 7, 7);
 
+	pcr->ic_version = rts5227_get_ic_version(pcr);
 	pcr->sd_pull_ctl_enable_tbl = rts5227_sd_pull_ctl_enable_tbl;
 	pcr->sd_pull_ctl_disable_tbl = rts5227_sd_pull_ctl_disable_tbl;
 	pcr->ms_pull_ctl_enable_tbl = rts5227_ms_pull_ctl_enable_tbl;
 	pcr->ms_pull_ctl_disable_tbl = rts5227_ms_pull_ctl_disable_tbl;
+
+	pcr->reg_pm_ctrl3 = PM_CTRL3;
+}
+
+static int rts522a_optimize_phy(struct rtsx_pcr *pcr)
+{
+	int err;
+
+	err = rtsx_pci_write_register(pcr, RTS522A_PM_CTRL3, D3_DELINK_MODE_EN,
+		0x00);
+	if (err < 0)
+		return err;
+
+	if (is_version(pcr, 0x522A, IC_VER_A)) {
+		err = rtsx_pci_write_phy_register(pcr, PHY_RCR2,
+			PHY_RCR2_INIT_27S);
+		if (err)
+			return err;
+
+		rtsx_pci_write_phy_register(pcr, PHY_RCR1, PHY_RCR1_INIT_27S);
+		rtsx_pci_write_phy_register(pcr, PHY_FLD0, PHY_FLD0_INIT_27S);
+		rtsx_pci_write_phy_register(pcr, PHY_FLD3, PHY_FLD3_INIT_27S);
+		rtsx_pci_write_phy_register(pcr, PHY_FLD4, PHY_FLD4_INIT_27S);
+	}
+
+	return 0;
+}
+
+static int rts522a_extra_init_hw(struct rtsx_pcr *pcr)
+{
+	rts5227_extra_init_hw(pcr);
+
+	rtsx_pci_write_register(pcr, FUNC_FORCE_CTL, FUNC_FORCE_UPME_XMT_DBG,
+		FUNC_FORCE_UPME_XMT_DBG);
+	rtsx_pci_write_register(pcr, PCLK_CTL, 0x04, 0x04);
+	rtsx_pci_write_register(pcr, PM_EVENT_DEBUG, PME_DEBUG_0, PME_DEBUG_0);
+	rtsx_pci_write_register(pcr, PM_CLK_FORCE_CTL, 0xFF, 0x11);
+
+	return 0;
+}
+
+/* rts522a operations mainly derived from rts5227, except phy/hw init setting.
+ */
+static const struct pcr_ops rts522a_pcr_ops = {
+	.fetch_vendor_settings = rts5227_fetch_vendor_settings,
+	.extra_init_hw = rts522a_extra_init_hw,
+	.optimize_phy = rts522a_optimize_phy,
+	.turn_on_led = rts5227_turn_on_led,
+	.turn_off_led = rts5227_turn_off_led,
+	.enable_auto_blink = rts5227_enable_auto_blink,
+	.disable_auto_blink = rts5227_disable_auto_blink,
+	.card_power_on = rts5227_card_power_on,
+	.card_power_off = rts5227_card_power_off,
+	.switch_output_voltage = rts5227_switch_output_voltage,
+	.cd_deglitch = NULL,
+	.conv_clk_and_div_n = NULL,
+	.force_power_down = rts5227_force_power_down,
+};
+
+void rts522a_init_params(struct rtsx_pcr *pcr)
+{
+	rts5227_init_params(pcr);
+
+	pcr->reg_pm_ctrl3 = RTS522A_PM_CTRL3;
 }

drivers/mfd/rtsx_pcr.c

@@ -55,6 +55,7 @@ static const struct pci_device_id rtsx_pci_ids[] = {
 	{ PCI_DEVICE(0x10EC, 0x5229), PCI_CLASS_OTHERS << 16, 0xFF0000 },
 	{ PCI_DEVICE(0x10EC, 0x5289), PCI_CLASS_OTHERS << 16, 0xFF0000 },
 	{ PCI_DEVICE(0x10EC, 0x5227), PCI_CLASS_OTHERS << 16, 0xFF0000 },
+	{ PCI_DEVICE(0x10EC, 0x522A), PCI_CLASS_OTHERS << 16, 0xFF0000 },
 	{ PCI_DEVICE(0x10EC, 0x5249), PCI_CLASS_OTHERS << 16, 0xFF0000 },
 	{ PCI_DEVICE(0x10EC, 0x5287), PCI_CLASS_OTHERS << 16, 0xFF0000 },
 	{ PCI_DEVICE(0x10EC, 0x5286), PCI_CLASS_OTHERS << 16, 0xFF0000 },
@@ -1098,6 +1099,10 @@ static int rtsx_pci_init_chip(struct rtsx_pcr *pcr)
 		rts5227_init_params(pcr);
 		break;
 
+	case 0x522A:
+		rts522a_init_params(pcr);
+		break;
+
 	case 0x5249:
 		rts5249_init_params(pcr);
 		break;

drivers/mfd/rtsx_pcr.h

@@ -27,6 +27,8 @@
 #define MIN_DIV_N_PCR		80
 #define MAX_DIV_N_PCR		208
 
+#define RTS522A_PM_CTRL3		0xFF7E
+
 #define RTS524A_PME_FORCE_CTL		0xFF78
 #define RTS524A_PM_CTRL3		0xFF7E
 
@@ -38,6 +40,7 @@ void rts5229_init_params(struct rtsx_pcr *pcr);
 void rtl8411_init_params(struct rtsx_pcr *pcr);
 void rtl8402_init_params(struct rtsx_pcr *pcr);
 void rts5227_init_params(struct rtsx_pcr *pcr);
+void rts522a_init_params(struct rtsx_pcr *pcr);
 void rts5249_init_params(struct rtsx_pcr *pcr);
 void rts524a_init_params(struct rtsx_pcr *pcr);
 void rts525a_init_params(struct rtsx_pcr *pcr);

include/linux/mfd/rtsx_pci.h

@@ -589,6 +589,7 @@
 #define   FORCE_ASPM_NO_ASPM		0x00
 #define PM_CLK_FORCE_CTL		0xFE58
 #define FUNC_FORCE_CTL			0xFE59
+#define   FUNC_FORCE_UPME_XMT_DBG	0x02
 #define PERST_GLITCH_WIDTH		0xFE5C
 #define CHANGE_LINK_STATE		0xFE5B
 #define RESET_LOAD_REG			0xFE5E
@@ -712,6 +713,7 @@
 #define PHY_RCR1			0x02
 #define   PHY_RCR1_ADP_TIME_4		0x0400
 #define   PHY_RCR1_VCO_COARSE		0x001F
+#define   PHY_RCR1_INIT_27S		0x0A1F
 #define PHY_SSCCR2			0x02
 #define   PHY_SSCCR2_PLL_NCODE		0x0A00
 #define   PHY_SSCCR2_TIME0		0x001C
@@ -724,6 +726,7 @@
 #define   PHY_RCR2_FREQSEL_12		0x0040
 #define   PHY_RCR2_CDR_SC_12P		0x0010
 #define   PHY_RCR2_CALIB_LATE		0x0002
+#define   PHY_RCR2_INIT_27S		0xC152
 #define PHY_SSCCR3			0x03
 #define   PHY_SSCCR3_STEP_IN		0x2740
 #define   PHY_SSCCR3_CHECK_DELAY	0x0008
@@ -800,12 +803,14 @@
 #define   PHY_ANA1A_RXT_BIST		0x0500
 #define   PHY_ANA1A_TXR_BIST		0x0040
 #define   PHY_ANA1A_REV			0x0006
+#define   PHY_FLD0_INIT_27S		0x2546
 #define PHY_FLD1			0x1B
 #define PHY_FLD2			0x1C
 #define PHY_FLD3			0x1D
 #define   PHY_FLD3_TIMER_4		0x0800
 #define   PHY_FLD3_TIMER_6		0x0020
 #define   PHY_FLD3_RXDELINK		0x0004
+#define   PHY_FLD3_INIT_27S		0x0004
 #define PHY_ANA1D			0x1D
 #define   PHY_ANA1D_DEBUG_ADDR		0x0004
 #define _PHY_FLD0			0x1D
@@ -824,6 +829,7 @@
 #define   PHY_FLD4_BER_COUNT		0x00E0
 #define   PHY_FLD4_BER_TIMER		0x000A
 #define   PHY_FLD4_BER_CHK_EN		0x0001
+#define   PHY_FLD4_INIT_27S		0x5C7F
 #define PHY_DIG1E			0x1E
 #define   PHY_DIG1E_REV			0x4000
 #define   PHY_DIG1E_D0_X_D1		0x1000