Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus

Pull MIPS updates from Ralf Baechle:
 "The most notable new addition inside this pull request is the support
  for MIPS's latest and greatest core called "inter/proAptiv".  The
  patch series describes this core as follows.

    "The interAptiv is a power-efficient multi-core microprocessor
     for use in system-on-chip (SoC) applications. The interAptiv combines
     a multi-threading pipeline with a coherence manager to deliver improved
     computational throughput and power efficiency. The interAptiv can
     contain one to four MIPS32R3 interAptiv cores, system level
     coherence manager with L2 cache, optional coherent I/O port,
     and optional floating point unit."

  The platform specific patches touch all 3 Broadcom families.  It adds
  support for the new Broadcom/Netlogix XLP9xx Soc, building a common
  BCM63XX SMP kernel for all BCM63XX SoCs regardless of core type/count
  and full gpio button/led descriptions for BCM47xx.

  The rest of the series are cleanups and bug fixes that are MIPS
  generic and consist largely of changes that Imgtec/MIPS had published
  in their linux-mti-3.10.git stable tree.  Random other cleanups and
  patches preparing code to be merged in 3.15"

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (139 commits)
  mips: select ARCH_MIGHT_HAVE_PC_SERIO
  mips: delete non-required instances of include <linux/init.h>
  MIPS: KVM: remove shadow_tlb code
  MIPS: KVM: use common EHINV aware UNIQUE_ENTRYHI
  mips/ide: flush dcache also if icache does not snoop dcache
  MIPS: BCM47XX: fix position of cpu_wait disabling
  MIPS: BCM63XX: select correct MIPS_L1_CACHE_SHIFT value
  MIPS: update MIPS_L1_CACHE_SHIFT based on MIPS_L1_CACHE_SHIFT_<N>
  MIPS: introduce MIPS_L1_CACHE_SHIFT_<N>
  MIPS: ZBOOT: gather string functions into string.c
  arch/mips/pci: don't check resource with devm_ioremap_resource
  arch/mips/lantiq/xway: don't check resource with devm_ioremap_resource
  bcma: gpio: don't cast u32 to unsigned long
  ssb: gpio: add own IRQ domain
  MIPS: BCM47XX: fix sparse warnings in board.c
  MIPS: BCM47XX: add board detection for Linksys WRT54GS V1
  MIPS: BCM47XX: fix detection for some boards
  MIPS: BCM47XX: Enable buttons support on SSB
  MIPS: BCM47XX: Convert WNDR4500 to new syntax
  MIPS: BCM47XX: Use "timer" trigger for status LEDs
  ...

arch/mips/Kconfig

@@ -116,7 +116,6 @@ config BCM47XX
 	select CEVT_R4K
 	select CSRC_R4K
 	select DMA_NONCOHERENT
-	select FW_CFE
 	select HW_HAS_PCI
 	select IRQ_CPU
 	select SYS_HAS_CPU_MIPS32_R1
@@ -124,6 +123,7 @@ config BCM47XX
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 	select SYS_HAS_EARLY_PRINTK
+	select EARLY_PRINTK_8250 if EARLY_PRINTK
 	help
 	 Support for BCM47XX based boards
 
@@ -134,14 +134,13 @@ config BCM63XX
 	select CSRC_R4K
 	select DMA_NONCOHERENT
 	select IRQ_CPU
-	select SYS_HAS_CPU_MIPS32_R1
-	select SYS_HAS_CPU_BMIPS4350 if !BCM63XX_CPU_6338 && !BCM63XX_CPU_6345 && !BCM63XX_CPU_6348
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_BIG_ENDIAN
 	select SYS_HAS_EARLY_PRINTK
 	select SWAP_IO_SPACE
 	select ARCH_REQUIRE_GPIOLIB
 	select HAVE_CLK
+	select MIPS_L1_CACHE_SHIFT_4
 	help
 	 Support for BCM63XX based boards
 
@@ -186,6 +185,7 @@ config MACH_DECSTATION
 	select SYS_SUPPORTS_128HZ
 	select SYS_SUPPORTS_256HZ
 	select SYS_SUPPORTS_1024HZ
+	select MIPS_L1_CACHE_SHIFT_4
 	help
 	  This enables support for DEC's MIPS based workstations.  For details
 	  see the Linux/MIPS FAQ on <http://www.linux-mips.org/> and the
@@ -305,7 +305,7 @@ config MIPS_MALTA
 	select CEVT_R4K
 	select CSRC_R4K
 	select CSRC_GIC
-	select DMA_NONCOHERENT
+	select DMA_MAYBE_COHERENT
 	select GENERIC_ISA_DMA
 	select HAVE_PCSPKR_PLATFORM
 	select IRQ_CPU
@@ -324,7 +324,6 @@ config MIPS_MALTA
 	select SYS_HAS_CPU_MIPS64_R2
 	select SYS_HAS_CPU_NEVADA
 	select SYS_HAS_CPU_RM7000
-	select SYS_HAS_EARLY_PRINTK
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_64BIT_KERNEL
 	select SYS_SUPPORTS_BIG_ENDIAN
@@ -349,6 +348,7 @@ config MIPS_SEAD3
 	select DMA_NONCOHERENT
 	select IRQ_CPU
 	select IRQ_GIC
+	select LIBFDT
 	select MIPS_MSC
 	select SYS_HAS_CPU_MIPS32_R1
 	select SYS_HAS_CPU_MIPS32_R2
@@ -471,6 +471,7 @@ config SGI_IP22
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_64BIT_KERNEL
 	select SYS_SUPPORTS_BIG_ENDIAN
+	select MIPS_L1_CACHE_SHIFT_7
 	help
 	  This are the SGI Indy, Challenge S and Indigo2, as well as certain
 	  OEM variants like the Tandem CMN B006S. To compile a Linux kernel
@@ -491,6 +492,7 @@ config SGI_IP27
 	select SYS_SUPPORTS_BIG_ENDIAN
 	select SYS_SUPPORTS_NUMA
 	select SYS_SUPPORTS_SMP
+	select MIPS_L1_CACHE_SHIFT_7
 	help
 	  This are the SGI Origin 200, Origin 2000 and Onyx 2 Graphics
 	  workstations.  To compile a Linux kernel that runs on these, say Y
@@ -697,6 +699,7 @@ config MIKROTIK_RB532
 	select SWAP_IO_SPACE
 	select BOOT_RAW
 	select ARCH_REQUIRE_GPIOLIB
+	select MIPS_L1_CACHE_SHIFT_4
 	help
 	  Support the Mikrotik(tm) RouterBoard 532 series,
 	  based on the IDT RC32434 SoC.
@@ -779,6 +782,7 @@ config NLM_XLP_BOARD
 	select CEVT_R4K
 	select CSRC_R4K
 	select IRQ_CPU
+	select ARCH_SUPPORTS_MSI
 	select ZONE_DMA32 if 64BIT
 	select SYNC_R4K
 	select SYS_HAS_EARLY_PRINTK
@@ -897,6 +901,10 @@ config FW_CFE
 config ARCH_DMA_ADDR_T_64BIT
 	def_bool (HIGHMEM && 64BIT_PHYS_ADDR) || 64BIT
 
+config DMA_MAYBE_COHERENT
+	select DMA_NONCOHERENT
+	bool
+
 config DMA_COHERENT
 	bool
 
@@ -1091,11 +1099,24 @@ config FW_SNIPROM
 config BOOT_ELF32
 	bool
 
+config MIPS_L1_CACHE_SHIFT_4
+	bool
+
+config MIPS_L1_CACHE_SHIFT_5
+	bool
+
+config MIPS_L1_CACHE_SHIFT_6
+	bool
+
+config MIPS_L1_CACHE_SHIFT_7
+	bool
+
 config MIPS_L1_CACHE_SHIFT
 	int
-	default "4" if MACH_DECSTATION || MIKROTIK_RB532 || PMC_MSP4200_EVAL || SOC_RT288X
-	default "6" if MIPS_CPU_SCACHE
-	default "7" if SGI_IP22 || SGI_IP27 || SGI_IP28 || SNI_RM || CPU_CAVIUM_OCTEON
+	default "4" if MIPS_L1_CACHE_SHIFT_4
+	default "5" if MIPS_L1_CACHE_SHIFT_5
+	default "6" if MIPS_L1_CACHE_SHIFT_6
+	default "7" if MIPS_L1_CACHE_SHIFT_7
 	default "5"
 
 config HAVE_STD_PC_SERIAL_PORT
@@ -1375,47 +1396,31 @@ config CPU_CAVIUM_OCTEON
 	select LIBFDT
 	select USE_OF
 	select USB_EHCI_BIG_ENDIAN_MMIO
+	select SYS_HAS_DMA_OPS
+	select MIPS_L1_CACHE_SHIFT_7
 	help
 	  The Cavium Octeon processor is a highly integrated chip containing
 	  many ethernet hardware widgets for networking tasks. The processor
 	  can have up to 16 Mips64v2 cores and 8 integrated gigabit ethernets.
 	  Full details can be found at http://www.caviumnetworks.com.
 
-config CPU_BMIPS3300
-	bool "BMIPS3300"
-	depends on SYS_HAS_CPU_BMIPS3300
-	select CPU_BMIPS
-	help
-	  Broadcom BMIPS3300 processors.
-
-config CPU_BMIPS4350
-	bool "BMIPS4350"
-	depends on SYS_HAS_CPU_BMIPS4350
-	select CPU_BMIPS
-	select SYS_SUPPORTS_SMP
-	select SYS_SUPPORTS_HOTPLUG_CPU
-	help
-	  Broadcom BMIPS4350 ("VIPER") processors.
-
-config CPU_BMIPS4380
-	bool "BMIPS4380"
-	depends on SYS_HAS_CPU_BMIPS4380
-	select CPU_BMIPS
-	select SYS_SUPPORTS_SMP
-	select SYS_SUPPORTS_HOTPLUG_CPU
-	help
-	  Broadcom BMIPS4380 processors.
-
-config CPU_BMIPS5000
-	bool "BMIPS5000"
-	depends on SYS_HAS_CPU_BMIPS5000
-	select CPU_BMIPS
+config CPU_BMIPS
+	bool "Broadcom BMIPS"
+	depends on SYS_HAS_CPU_BMIPS
+	select CPU_MIPS32
+	select CPU_BMIPS32_3300 if SYS_HAS_CPU_BMIPS32_3300
+	select CPU_BMIPS4350 if SYS_HAS_CPU_BMIPS4350
+	select CPU_BMIPS4380 if SYS_HAS_CPU_BMIPS4380
+	select CPU_BMIPS5000 if SYS_HAS_CPU_BMIPS5000
+	select CPU_SUPPORTS_32BIT_KERNEL
+	select DMA_NONCOHERENT
+	select IRQ_CPU
+	select SWAP_IO_SPACE
+	select WEAK_ORDERING
 	select CPU_SUPPORTS_HIGHMEM
-	select MIPS_CPU_SCACHE
-	select SYS_SUPPORTS_SMP
-	select SYS_SUPPORTS_HOTPLUG_CPU
+	select CPU_HAS_PREFETCH
 	help
-	  Broadcom BMIPS5000 processors.
+	  Support for BMIPS32/3300/4350/4380 and BMIPS5000 processors.
 
 config CPU_XLR
 	bool "Netlogic XLR SoC"
@@ -1498,14 +1503,25 @@ config CPU_LOONGSON1
 	select CPU_SUPPORTS_32BIT_KERNEL
 	select CPU_SUPPORTS_HIGHMEM
 
-config CPU_BMIPS
+config CPU_BMIPS32_3300
+	select SMP_UP if SMP
 	bool
-	select CPU_MIPS32
-	select CPU_SUPPORTS_32BIT_KERNEL
-	select DMA_NONCOHERENT
-	select IRQ_CPU
-	select SWAP_IO_SPACE
-	select WEAK_ORDERING
+
+config CPU_BMIPS4350
+	bool
+	select SYS_SUPPORTS_SMP
+	select SYS_SUPPORTS_HOTPLUG_CPU
+
+config CPU_BMIPS4380
+	bool
+	select SYS_SUPPORTS_SMP
+	select SYS_SUPPORTS_HOTPLUG_CPU
+
+config CPU_BMIPS5000
+	bool
+	select MIPS_CPU_SCACHE
+	select SYS_SUPPORTS_SMP
+	select SYS_SUPPORTS_HOTPLUG_CPU
 
 config SYS_HAS_CPU_LOONGSON2E
 	bool
@@ -1579,17 +1595,24 @@ config SYS_HAS_CPU_SB1
 config SYS_HAS_CPU_CAVIUM_OCTEON
 	bool
 
-config SYS_HAS_CPU_BMIPS3300
+config SYS_HAS_CPU_BMIPS
+	bool
+
+config SYS_HAS_CPU_BMIPS32_3300
 	bool
+	select SYS_HAS_CPU_BMIPS
 
 config SYS_HAS_CPU_BMIPS4350
 	bool
+	select SYS_HAS_CPU_BMIPS
 
 config SYS_HAS_CPU_BMIPS4380
 	bool
+	select SYS_HAS_CPU_BMIPS
 
 config SYS_HAS_CPU_BMIPS5000
 	bool
+	select SYS_HAS_CPU_BMIPS
 
 config SYS_HAS_CPU_XLR
 	bool
@@ -1797,6 +1820,7 @@ config IP22_CPU_SCACHE
 config MIPS_CPU_SCACHE
 	bool
 	select BOARD_SCACHE
+	select MIPS_L1_CACHE_SHIFT_6
 
 config R5000_CPU_SCACHE
 	bool
@@ -1833,59 +1857,48 @@ choice
 	prompt "MIPS MT options"
 
 config MIPS_MT_DISABLED
-	bool "Disable multithreading support."
+	bool "Disable multithreading support"
 	help
-	  Use this option if your workload can't take advantage of
-	  MIPS hardware multithreading support.  On systems that don't have
-	  the option of an MT-enabled processor this option will be the only
-	  option in this menu.
+	  Use this option if your platform does not support the MT ASE
+	  which is hardware multithreading support. On systems without
+	  an MT-enabled processor, this will be the only option that is
+	  available in this menu.
 
 config MIPS_MT_SMP
 	bool "Use 1 TC on each available VPE for SMP"
 	depends on SYS_SUPPORTS_MULTITHREADING
 	select CPU_MIPSR2_IRQ_VI
 	select CPU_MIPSR2_IRQ_EI
+	select SYNC_R4K
 	select MIPS_MT
 	select SMP
-	select SYS_SUPPORTS_SCHED_SMT if SMP
-	select SYS_SUPPORTS_SMP
 	select SMP_UP
+	select SYS_SUPPORTS_SMP
+	select SYS_SUPPORTS_SCHED_SMT
 	select MIPS_PERF_SHARED_TC_COUNTERS
 	help
-	  This is a kernel model which is known a VSMP but lately has been
-	  marketesed into SMVP.
-	  Virtual SMP uses the processor's VPEs  to implement virtual
-	  processors. In currently available configuration of the 34K processor
-	  this allows for a dual processor. Both processors will share the same
-	  primary caches; each will obtain the half of the TLB for it's own
-	  exclusive use. For a layman this model can be described as similar to
-	  what Intel calls Hyperthreading.
-
-	  For further information see http://www.linux-mips.org/wiki/34K#VSMP
+	  This is a kernel model which is known as SMVP. This is supported
+	  on cores with the MT ASE and uses the available VPEs to implement
+	  virtual processors which supports SMP. This is equivalent to the
+	  Intel Hyperthreading feature. For further information go to
+	  <http://www.imgtec.com/mips/mips-multithreading.asp>.
 
 config MIPS_MT_SMTC
-	bool "SMTC: Use all TCs on all VPEs for SMP"
+	bool "Use all TCs on all VPEs for SMP (DEPRECATED)"
 	depends on CPU_MIPS32_R2
-	#depends on CPU_MIPS64_R2		# once there is hardware ...
 	depends on SYS_SUPPORTS_MULTITHREADING
 	select CPU_MIPSR2_IRQ_VI
 	select CPU_MIPSR2_IRQ_EI
 	select MIPS_MT
-	select NR_CPUS_DEFAULT_8
 	select SMP
-	select SYS_SUPPORTS_SMP
 	select SMP_UP
+	select SYS_SUPPORTS_SMP
+	select NR_CPUS_DEFAULT_8
 	help
-	  This is a kernel model which is known a SMTC or lately has been
-	  marketesed into SMVP.
-	  is presenting the available TC's of the core as processors to Linux.
-	  On currently available 34K processors this means a Linux system will
-	  see up to 5 processors. The implementation of the SMTC kernel differs
-	  significantly from VSMP and cannot efficiently coexist in the same
-	  kernel binary so the choice between VSMP and SMTC is a compile time
-	  decision.
-
-	  For further information see http://www.linux-mips.org/wiki/34K#SMTC
+	  This is a kernel model which is known as SMTC. This is
+	  supported on cores with the MT ASE and presents all TCs
+	  available on all VPEs to support SMP. For further
+	  information see <http://www.linux-mips.org/wiki/34K#SMTC>.
 
 endchoice
 
@@ -1922,6 +1935,16 @@ config MIPS_VPE_LOADER
 	  Includes a loader for loading an elf relocatable object
 	  onto another VPE and running it.
 
+config MIPS_VPE_LOADER_CMP
+	bool
+	default "y"
+	depends on MIPS_VPE_LOADER && MIPS_CMP
+
+config MIPS_VPE_LOADER_MT
+	bool
+	default "y"
+	depends on MIPS_VPE_LOADER && !MIPS_CMP
+
 config MIPS_MT_SMTC_IM_BACKSTOP
 	bool "Use per-TC register bits as backstop for inhibited IM bits"
 	depends on MIPS_MT_SMTC
@@ -1955,24 +1978,29 @@ config MIPS_VPE_LOADER_TOM
 	  you to ensure the amount you put in the option and the space your
 	  program requires is less or equal to the amount physically present.
 
-# this should possibly be in drivers/char, but it is rather cpu related. Hmmm
 config MIPS_VPE_APSP_API
 	bool "Enable support for AP/SP API (RTLX)"
 	depends on MIPS_VPE_LOADER
 	help
 
+config MIPS_VPE_APSP_API_CMP
+	bool
+	default "y"
+	depends on MIPS_VPE_APSP_API && MIPS_CMP
+
+config MIPS_VPE_APSP_API_MT
+	bool
+	default "y"
+	depends on MIPS_VPE_APSP_API && !MIPS_CMP
+
 config MIPS_CMP
-	bool "MIPS CMP framework support"
-	depends on SYS_SUPPORTS_MIPS_CMP
-	select SMP
+	bool "MIPS CMP support"
+	depends on SYS_SUPPORTS_MIPS_CMP && MIPS_MT_SMP
 	select SYNC_R4K
-	select SYS_SUPPORTS_SMP
-	select SYS_SUPPORTS_SCHED_SMT if SMP
 	select WEAK_ORDERING
 	default n
 	help
-	  This is a placeholder option for the GCMP work. It will need to
-	  be handled differently...
+	  Enable Coherency Manager processor (CMP) support.
 
 config SB1_PASS_1_WORKAROUNDS
 	bool
@@ -2324,6 +2352,23 @@ config SECCOMP
 
 	  If unsure, say Y. Only embedded should say N here.
 
+config MIPS_O32_FP64_SUPPORT
+	bool "Support for O32 binaries using 64-bit FP"
+	depends on 32BIT || MIPS32_O32
+	default y
+	help
+	  When this is enabled, the kernel will support use of 64-bit floating
+	  point registers with binaries using the O32 ABI along with the
+	  EF_MIPS_FP64 ELF header flag (typically built with -mfp64). On
+	  32-bit MIPS systems this support is at the cost of increasing the
+	  size and complexity of the compiled FPU emulator. Thus if you are
+	  running a MIPS32 system and know that none of your userland binaries
+	  will require 64-bit floating point, you may wish to reduce the size
+	  of your kernel & potentially improve FP emulation performance by
+	  saying N here.
+
+	  If unsure, say Y.
+
 config USE_OF
 	bool
 	select OF

arch/mips/Makefile

@@ -114,7 +114,7 @@ cflags-$(CONFIG_CPU_BIG_ENDIAN)		+= $(shell $(CC) -dumpmachine |grep -q 'mips.*e
 cflags-$(CONFIG_CPU_LITTLE_ENDIAN)	+= $(shell $(CC) -dumpmachine |grep -q 'mips.*el-.*' || echo -EL $(undef-all) $(predef-le))
 
 cflags-$(CONFIG_CPU_HAS_SMARTMIPS)	+= $(call cc-option,-msmartmips)
-cflags-$(CONFIG_CPU_MICROMIPS) += $(call cc-option,-mmicromips -mno-jals)
+cflags-$(CONFIG_CPU_MICROMIPS) += $(call cc-option,-mmicromips)
 
 cflags-$(CONFIG_SB1XXX_CORELIS)	+= $(call cc-option,-mno-sched-prolog) \
 				   -fno-omit-frame-pointer

arch/mips/alchemy/common/power.c

@@ -29,7 +29,6 @@
  *  675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
-#include <linux/init.h>
 #include <linux/pm.h>
 #include <linux/sysctl.h>
 #include <linux/jiffies.h>

arch/mips/ar7/time.c

@@ -18,7 +18,6 @@
  * Setting up the clock on the MIPS boards.
  */
 
-#include <linux/init.h>
 #include <linux/time.h>
 #include <linux/err.h>
 #include <linux/clk.h>

arch/mips/ath79/common.h

@@ -15,7 +15,6 @@
 #define __ATH79_COMMON_H
 
 #include <linux/types.h>
-#include <linux/init.h>
 
 #define ATH79_MEM_SIZE_MIN	(2 * 1024 * 1024)
 #define ATH79_MEM_SIZE_MAX	(128 * 1024 * 1024)

arch/mips/bcm47xx/Kconfig

@@ -2,6 +2,7 @@ if BCM47XX
 
 config BCM47XX_SSB
 	bool "SSB Support for Broadcom BCM47XX"
+	select SYS_HAS_CPU_BMIPS32_3300
 	select SSB
 	select SSB_DRIVER_MIPS
 	select SSB_DRIVER_EXTIF
@@ -11,6 +12,7 @@ config BCM47XX_SSB
 	select SSB_PCICORE_HOSTMODE if PCI
 	select SSB_DRIVER_GPIO
 	select GPIOLIB
+	select LEDS_GPIO_REGISTER
 	default y
 	help
 	 Add support for old Broadcom BCM47xx boards with Sonics Silicon Backplane support.
@@ -20,6 +22,7 @@ config BCM47XX_SSB
 config BCM47XX_BCMA
 	bool "BCMA Support for Broadcom BCM47XX"
 	select SYS_HAS_CPU_MIPS32_R2
+	select CPU_MIPSR2_IRQ_VI
 	select BCMA
 	select BCMA_HOST_SOC
 	select BCMA_DRIVER_MIPS
@@ -27,6 +30,7 @@ config BCM47XX_BCMA
 	select BCMA_DRIVER_PCI_HOSTMODE if PCI
 	select BCMA_DRIVER_GPIO
 	select GPIOLIB
+	select LEDS_GPIO_REGISTER
 	default y
 	help
 	 Add support for new Broadcom BCM47xx boards with Broadcom specific Advanced Microcontroller Bus.

arch/mips/bcm47xx/Makefile

@@ -4,5 +4,4 @@
 #
 
 obj-y				+= irq.o nvram.o prom.o serial.o setup.o time.o sprom.o
-obj-y				+= board.o
-obj-$(CONFIG_BCM47XX_SSB)	+= wgt634u.o
+obj-y				+= board.o buttons.o leds.o

arch/mips/bcm47xx/bcm47xx_private.h

@@ -0,0 +1,12 @@
+#ifndef LINUX_BCM47XX_PRIVATE_H_
+#define LINUX_BCM47XX_PRIVATE_H_
+
+#include <linux/kernel.h>
+
+/* buttons.c */
+int __init bcm47xx_buttons_register(void);
+
+/* leds.c */
+void __init bcm47xx_leds_register(void);
+
+#endif

arch/mips/bcm47xx/board.c

@@ -36,26 +36,32 @@ static const
 struct bcm47xx_board_type_list1 bcm47xx_board_list_model_name[] __initconst = {
 	{{BCM47XX_BOARD_DLINK_DIR130, "D-Link DIR-130"}, "DIR-130"},
 	{{BCM47XX_BOARD_DLINK_DIR330, "D-Link DIR-330"}, "DIR-330"},
-	{ {0}, 0},
+	{ {0}, NULL},
 };
 
 /* model_no */
 static const
 struct bcm47xx_board_type_list1 bcm47xx_board_list_model_no[] __initconst = {
 	{{BCM47XX_BOARD_ASUS_WL700GE, "Asus WL700"}, "WL700"},
-	{ {0}, 0},
+	{ {0}, NULL},
 };
 
 /* machine_name */
 static const
 struct bcm47xx_board_type_list1 bcm47xx_board_list_machine_name[] __initconst = {
 	{{BCM47XX_BOARD_LINKSYS_WRTSL54GS, "Linksys WRTSL54GS"}, "WRTSL54GS"},
-	{ {0}, 0},
+	{ {0}, NULL},
 };
 
 /* hardware_version */
 static const
 struct bcm47xx_board_type_list1 bcm47xx_board_list_hardware_version[] __initconst = {
+	{{BCM47XX_BOARD_ASUS_RTN10U, "Asus RT-N10U"}, "RTN10U"},
+	{{BCM47XX_BOARD_ASUS_RTN12, "Asus RT-N12"}, "RT-N12"},
+	{{BCM47XX_BOARD_ASUS_RTN12B1, "Asus RT-N12B1"}, "RTN12B1"},
+	{{BCM47XX_BOARD_ASUS_RTN12C1, "Asus RT-N12C1"}, "RTN12C1"},
+	{{BCM47XX_BOARD_ASUS_RTN12D1, "Asus RT-N12D1"}, "RTN12D1"},
+	{{BCM47XX_BOARD_ASUS_RTN12HP, "Asus RT-N12HP"}, "RTN12HP"},
 	{{BCM47XX_BOARD_ASUS_RTN16, "Asus RT-N16"}, "RT-N16-"},
 	{{BCM47XX_BOARD_ASUS_WL320GE, "Asus WL320GE"}, "WL320G-"},
 	{{BCM47XX_BOARD_ASUS_WL330GE, "Asus WL330GE"}, "WL330GE-"},
@@ -66,7 +72,7 @@ struct bcm47xx_board_type_list1 bcm47xx_board_list_hardware_version[] __initcons
 	{{BCM47XX_BOARD_ASUS_WL520GC, "Asus WL520GC"}, "WL520GC-"},
 	{{BCM47XX_BOARD_ASUS_WL520GU, "Asus WL520GU"}, "WL520GU-"},
 	{{BCM47XX_BOARD_BELKIN_F7D4301, "Belkin F7D4301"}, "F7D4301"},
-	{ {0}, 0},
+	{ {0}, NULL},
 };
 
 /* productid */
@@ -75,19 +81,13 @@ struct bcm47xx_board_type_list1 bcm47xx_board_list_productid[] __initconst = {
 	{{BCM47XX_BOARD_ASUS_RTAC66U, "Asus RT-AC66U"}, "RT-AC66U"},
 	{{BCM47XX_BOARD_ASUS_RTN10, "Asus RT-N10"}, "RT-N10"},
 	{{BCM47XX_BOARD_ASUS_RTN10D, "Asus RT-N10D"}, "RT-N10D"},
-	{{BCM47XX_BOARD_ASUS_RTN10U, "Asus RT-N10U"}, "RT-N10U"},
-	{{BCM47XX_BOARD_ASUS_RTN12, "Asus RT-N12"}, "RT-N12"},
-	{{BCM47XX_BOARD_ASUS_RTN12B1, "Asus RT-N12B1"}, "RT-N12B1"},
-	{{BCM47XX_BOARD_ASUS_RTN12C1, "Asus RT-N12C1"}, "RT-N12C1"},
-	{{BCM47XX_BOARD_ASUS_RTN12D1, "Asus RT-N12D1"}, "RT-N12D1"},
-	{{BCM47XX_BOARD_ASUS_RTN12HP, "Asus RT-N12HP"}, "RT-N12HP"},
 	{{BCM47XX_BOARD_ASUS_RTN15U, "Asus RT-N15U"}, "RT-N15U"},
 	{{BCM47XX_BOARD_ASUS_RTN16, "Asus RT-N16"}, "RT-N16"},
 	{{BCM47XX_BOARD_ASUS_RTN53, "Asus RT-N53"}, "RT-N53"},
 	{{BCM47XX_BOARD_ASUS_RTN66U, "Asus RT-N66U"}, "RT-N66U"},
 	{{BCM47XX_BOARD_ASUS_WL300G, "Asus WL300G"}, "WL300g"},
 	{{BCM47XX_BOARD_ASUS_WLHDD, "Asus WLHDD"}, "WLHDD"},
-	{ {0}, 0},
+	{ {0}, NULL},
 };
 
 /* ModelId */
@@ -97,7 +97,7 @@ struct bcm47xx_board_type_list1 bcm47xx_board_list_ModelId[] __initconst = {
 	{{BCM47XX_BOARD_MOTOROLA_WE800G, "Motorola WE800G"}, "WE800G"},
 	{{BCM47XX_BOARD_MOTOROLA_WR850GP, "Motorola WR850GP"}, "WR850GP"},
 	{{BCM47XX_BOARD_MOTOROLA_WR850GV2V3, "Motorola WR850G"}, "WR850G"},
-	{ {0}, 0},
+	{ {0}, NULL},
 };
 
 /* melco_id or buf1falo_id */
@@ -112,7 +112,7 @@ struct bcm47xx_board_type_list1 bcm47xx_board_list_melco_id[] __initconst = {
 	{{BCM47XX_BOARD_BUFFALO_WZR_G300N, "Buffalo WZR-G300N"}, "31120"},
 	{{BCM47XX_BOARD_BUFFALO_WZR_RS_G54, "Buffalo WZR-RS-G54"}, "30083"},
 	{{BCM47XX_BOARD_BUFFALO_WZR_RS_G54HP, "Buffalo WZR-RS-G54HP"}, "30103"},
-	{ {0}, 0},
+	{ {0}, NULL},
 };
 
 /* boot_hw_model, boot_hw_ver */
@@ -143,7 +143,7 @@ struct bcm47xx_board_type_list2 bcm47xx_board_list_boot_hw[] __initconst = {
 	{{BCM47XX_BOARD_LINKSYS_WRT54G3GV2, "Linksys WRT54G3GV2-VF"}, "WRT54G3GV2-VF", "1.0"},
 	{{BCM47XX_BOARD_LINKSYS_WRT610NV1, "Linksys WRT610N V1"}, "WRT610N", "1.0"},
 	{{BCM47XX_BOARD_LINKSYS_WRT610NV2, "Linksys WRT610N V2"}, "WRT610N", "2.0"},
-	{ {0}, 0},
+	{ {0}, NULL},
 };
 
 /* board_id */
@@ -165,7 +165,7 @@ struct bcm47xx_board_type_list1 bcm47xx_board_list_board_id[] __initconst = {
 	{{BCM47XX_BOARD_NETGEAR_WNR3500V2, "Netgear WNR3500 V2"}, "U12H127T00_NETGEAR"},
 	{{BCM47XX_BOARD_NETGEAR_WNR3500V2VC, "Netgear WNR3500 V2vc"}, "U12H127T70_NETGEAR"},
 	{{BCM47XX_BOARD_NETGEAR_WNR834BV2, "Netgear WNR834B V2"}, "U12H081T00_NETGEAR"},
-	{ {0}, 0},
+	{ {0}, NULL},
 };
 
 /* boardtype, boardnum, boardrev */
@@ -174,7 +174,9 @@ struct bcm47xx_board_type_list3 bcm47xx_board_list_board[] __initconst = {
 	{{BCM47XX_BOARD_HUAWEI_E970, "Huawei E970"}, "0x048e", "0x5347", "0x11"},
 	{{BCM47XX_BOARD_PHICOMM_M1, "Phicomm M1"}, "0x0590", "80", "0x1104"},
 	{{BCM47XX_BOARD_ZTE_H218N, "ZTE H218N"}, "0x053d", "1234", "0x1305"},
-	{ {0}, 0},
+	{{BCM47XX_BOARD_NETGEAR_WNR3500L, "Netgear WNR3500L"}, "0x04CF", "3500", "02"},
+	{{BCM47XX_BOARD_LINKSYS_WRT54GSV1, "Linksys WRT54GS V1"}, "0x0101", "42", "0x10"},
+	{ {0}, NULL},
 };
 
 static const

arch/mips/bcm47xx/buttons.c

@@ -0,0 +1,531 @@
+#include "bcm47xx_private.h"
+
+#include <linux/input.h>
+#include <linux/gpio_keys.h>
+#include <linux/interrupt.h>
+#include <bcm47xx_board.h>
+#include <bcm47xx.h>
+
+/**************************************************
+ * Database
+ **************************************************/
+
+#define BCM47XX_GPIO_KEY(_gpio, _code)					\
+	{								\
+		.code		= _code,				\
+		.gpio		= _gpio,				\
+		.active_low	= 1,					\
+	}
+
+/* Asus */
+
+static const struct gpio_keys_button
+bcm47xx_buttons_asus_rtn12[] __initconst = {
+	BCM47XX_GPIO_KEY(0, KEY_WPS_BUTTON),
+	BCM47XX_GPIO_KEY(1, KEY_RESTART),
+	BCM47XX_GPIO_KEY(4, BTN_0), /* Router mode */
+	BCM47XX_GPIO_KEY(5, BTN_1), /* Repeater mode */
+	BCM47XX_GPIO_KEY(6, BTN_2), /* AP mode */
+};
+
+static const struct gpio_keys_button
+bcm47xx_buttons_asus_rtn16[] __initconst = {
+	BCM47XX_GPIO_KEY(6, KEY_WPS_BUTTON),
+	BCM47XX_GPIO_KEY(8, KEY_RESTART),
+};
+
+static const struct gpio_keys_button
+bcm47xx_buttons_asus_rtn66u[] __initconst = {
+	BCM47XX_GPIO_KEY(4, KEY_WPS_BUTTON),
+	BCM47XX_GPIO_KEY(9, KEY_RESTART),
+};
+
+static const struct gpio_keys_button
+bcm47xx_buttons_asus_wl300g[] __initconst = {
+	BCM47XX_GPIO_KEY(6, KEY_RESTART),
+};
+
+static const struct gpio_keys_button
+bcm47xx_buttons_asus_wl320ge[] __initconst = {
+	BCM47XX_GPIO_KEY(6, KEY_RESTART),
+};
+
+static const struct gpio_keys_button
+bcm47xx_buttons_asus_wl330ge[] __initconst = {
+	BCM47XX_GPIO_KEY(2, KEY_RESTART),
+};
+
+static const struct gpio_keys_button
+bcm47xx_buttons_asus_wl500gd[] __initconst = {
+	BCM47XX_GPIO_KEY(6, KEY_RESTART),
+};
+
+static const struct gpio_keys_button
+bcm47xx_buttons_asus_wl500gpv1[] __initconst = {
+	BCM47XX_GPIO_KEY(0, KEY_RESTART),
+	BCM47XX_GPIO_KEY(4, KEY_WPS_BUTTON),
+};
+
+static const struct gpio_keys_button
+bcm47xx_buttons_asus_wl500gpv2[] __initconst = {
+	BCM47XX_GPIO_KEY(2, KEY_RESTART),
+	BCM47XX_GPIO_KEY(3, KEY_WPS_BUTTON),
+};
+
+static const struct gpio_keys_button
+bcm47xx_buttons_asus_wl500w[] __initconst = {
+	BCM47XX_GPIO_KEY(6, KEY_RESTART),
+	BCM47XX_GPIO_KEY(7, KEY_WPS_BUTTON),
+};
+
+static const struct gpio_keys_button
+bcm47xx_buttons_asus_wl520gc[] __initconst = {
+	BCM47XX_GPIO_KEY(2, KEY_RESTART),
+	BCM47XX_GPIO_KEY(3, KEY_WPS_BUTTON),
+};
+
+static const struct gpio_keys_button
+bcm47xx_buttons_asus_wl520gu[] __initconst = {
+	BCM47XX_GPIO_KEY(2, KEY_RESTART),
+	BCM47XX_GPIO_KEY(3, KEY_WPS_BUTTON),
+};
+
+static const struct gpio_keys_button
+bcm47xx_buttons_asus_wl700ge[] __initconst = {
+	BCM47XX_GPIO_KEY(0, KEY_POWER), /* Hard disk power switch */
+	BCM47XX_GPIO_KEY(4, KEY_WPS_BUTTON), /* EZSetup */
+	BCM47XX_GPIO_KEY(6, KEY_COPY), /* Copy data from USB to internal disk */
+	BCM47XX_GPIO_KEY(7, KEY_RESTART), /* Hard reset */
+};
+
+static const struct gpio_keys_button
+bcm47xx_buttons_asus_wlhdd[] __initconst = {
+	BCM47XX_GPIO_KEY(6, KEY_RESTART),
+};
+
+/* Huawei */
+
+static const struct gpio_keys_button
+bcm47xx_buttons_huawei_e970[] __initconst = {
+	BCM47XX_GPIO_KEY(6, KEY_RESTART),
+};
+
+/* Belkin */
+
+static const struct gpio_keys_button
+bcm47xx_buttons_belkin_f7d4301[] __initconst = {
+	BCM47XX_GPIO_KEY(6, KEY_RESTART),
+	BCM47XX_GPIO_KEY(8, KEY_WPS_BUTTON),
+};
+
+/* Buffalo */
+
+static const struct gpio_keys_button
+bcm47xx_buttons_buffalo_whr2_a54g54[] __initconst = {
+	BCM47XX_GPIO_KEY(4, KEY_RESTART),
+};
+
+static const struct gpio_keys_button
+bcm47xx_buttons_buffalo_whr_g125[] __initconst = {
+	BCM47XX_GPIO_KEY(0, KEY_WPS_BUTTON),
+	BCM47XX_GPIO_KEY(4, KEY_RESTART),
+	BCM47XX_GPIO_KEY(5, BTN_0), /* Router / AP mode swtich */
+};
+
+static const struct gpio_keys_button
+bcm47xx_buttons_buffalo_whr_g54s[] __initconst = {
+	BCM47XX_GPIO_KEY(0, KEY_WPS_BUTTON),
+	BCM47XX_GPIO_KEY(4, KEY_RESTART),
+	BCM47XX_GPIO_KEY(5, BTN_0), /* Router / AP mode swtich */
+};
+
+static const struct gpio_keys_button
+bcm47xx_buttons_buffalo_whr_hp_g54[] __initconst = {
+	BCM47XX_GPIO_KEY(0, KEY_WPS_BUTTON),
+	BCM47XX_GPIO_KEY(4, KEY_RESTART),
+	BCM47XX_GPIO_KEY(5, BTN_0), /* Router / AP mode swtich */
+};
+
+static const struct gpio_keys_button
+bcm47xx_buttons_buffalo_wzr_g300n[] __initconst = {
+	BCM47XX_GPIO_KEY(4, KEY_RESTART),
+};
+
+static const struct gpio_keys_button
+bcm47xx_buttons_buffalo_wzr_rs_g54[] __initconst = {
+	BCM47XX_GPIO_KEY(0, KEY_WPS_BUTTON),
+	BCM47XX_GPIO_KEY(4, KEY_RESTART),
+};
+
+static const struct gpio_keys_button
+bcm47xx_buttons_buffalo_wzr_rs_g54hp[] __initconst = {
+	BCM47XX_GPIO_KEY(0, KEY_WPS_BUTTON),
+	BCM47XX_GPIO_KEY(4, KEY_RESTART),
+};
+
+/* Dell */
+
+static const struct gpio_keys_button
+bcm47xx_buttons_dell_tm2300[] __initconst = {
+	BCM47XX_GPIO_KEY(0, KEY_RESTART),
+};
+
+/* D-Link */
+
+static const struct gpio_keys_button
+bcm47xx_buttons_dlink_dir130[] __initconst = {
+	BCM47XX_GPIO_KEY(3, KEY_RESTART),
+	BCM47XX_GPIO_KEY(7, KEY_UNKNOWN),
+};
+
+static const struct gpio_keys_button
+bcm47xx_buttons_dlink_dir330[] __initconst = {
+	BCM47XX_GPIO_KEY(3, KEY_RESTART),
+	BCM47XX_GPIO_KEY(7, KEY_UNKNOWN),
+};
+
+/* Linksys */
+
+static const struct gpio_keys_button
+bcm47xx_buttons_linksys_e1000v1[] __initconst = {
+	BCM47XX_GPIO_KEY(5, KEY_WPS_BUTTON),
+	BCM47XX_GPIO_KEY(6, KEY_RESTART),
+};
+
+static const struct gpio_keys_button
+bcm47xx_buttons_linksys_e1000v21[] __initconst = {
+	BCM47XX_GPIO_KEY(9, KEY_WPS_BUTTON),
+	BCM47XX_GPIO_KEY(10, KEY_RESTART),
+};
+
+static const struct gpio_keys_button
+bcm47xx_buttons_linksys_e2000v1[] __initconst = {
+	BCM47XX_GPIO_KEY(5, KEY_WPS_BUTTON),
+	BCM47XX_GPIO_KEY(8, KEY_RESTART),
+};
+
+static const struct gpio_keys_button
+bcm47xx_buttons_linksys_e3000v1[] __initconst = {
+	BCM47XX_GPIO_KEY(4, KEY_WPS_BUTTON),
+	BCM47XX_GPIO_KEY(6, KEY_RESTART),
+};
+
+static const struct gpio_keys_button
+bcm47xx_buttons_linksys_e3200v1[] __initconst = {
+	BCM47XX_GPIO_KEY(5, KEY_RESTART),
+	BCM47XX_GPIO_KEY(8, KEY_WPS_BUTTON),
+};
+
+static const struct gpio_keys_button
+bcm47xx_buttons_linksys_e4200v1[] __initconst = {
+	BCM47XX_GPIO_KEY(4, KEY_WPS_BUTTON),
+	BCM47XX_GPIO_KEY(6, KEY_RESTART),
+};
+
+static const struct gpio_keys_button
+bcm47xx_buttons_linksys_wrt150nv1[] __initconst = {
+	BCM47XX_GPIO_KEY(4, KEY_WPS_BUTTON),
+	BCM47XX_GPIO_KEY(6, KEY_RESTART),
+};
+
+static const struct gpio_keys_button
+bcm47xx_buttons_linksys_wrt150nv11[] __initconst = {
+	BCM47XX_GPIO_KEY(4, KEY_WPS_BUTTON),
+	BCM47XX_GPIO_KEY(6, KEY_RESTART),
+};
+
+static const struct gpio_keys_button
+bcm47xx_buttons_linksys_wrt160nv1[] __initconst = {
+	BCM47XX_GPIO_KEY(4, KEY_WPS_BUTTON),
+	BCM47XX_GPIO_KEY(6, KEY_RESTART),
+};
+
+static const struct gpio_keys_button
+bcm47xx_buttons_linksys_wrt160nv3[] __initconst = {
+	BCM47XX_GPIO_KEY(5, KEY_WPS_BUTTON),
+	BCM47XX_GPIO_KEY(6, KEY_RESTART),
+};
+
+static const struct gpio_keys_button
+bcm47xx_buttons_linksys_wrt300nv11[] __initconst = {
+	BCM47XX_GPIO_KEY(4, KEY_UNKNOWN),
+	BCM47XX_GPIO_KEY(6, KEY_RESTART),
+};
+
+static const struct gpio_keys_button
+bcm47xx_buttons_linksys_wrt310nv1[] __initconst = {
+	BCM47XX_GPIO_KEY(6, KEY_RESTART),
+	BCM47XX_GPIO_KEY(8, KEY_UNKNOWN),
+};
+
+static const struct gpio_keys_button
+bcm47xx_buttons_linksys_wrt610nv1[] __initconst = {
+	BCM47XX_GPIO_KEY(6, KEY_RESTART),
+	BCM47XX_GPIO_KEY(8, KEY_WPS_BUTTON),
+};
+
+static const struct gpio_keys_button
+bcm47xx_buttons_linksys_wrt610nv2[] __initconst = {
+	BCM47XX_GPIO_KEY(4, KEY_WPS_BUTTON),
+	BCM47XX_GPIO_KEY(6, KEY_RESTART),
+};
+
+/* Motorola */
+
+static const struct gpio_keys_button
+bcm47xx_buttons_motorola_we800g[] __initconst = {
+	BCM47XX_GPIO_KEY(0, KEY_RESTART),
+};
+
+static const struct gpio_keys_button
+bcm47xx_buttons_motorola_wr850gp[] __initconst = {
+	BCM47XX_GPIO_KEY(5, KEY_RESTART),
+};
+
+static const struct gpio_keys_button
+bcm47xx_buttons_motorola_wr850gv2v3[] __initconst = {
+	BCM47XX_GPIO_KEY(5, KEY_RESTART),
+};
+
+/* Netgear */
+
+static const struct gpio_keys_button
+bcm47xx_buttons_netgear_wndr3400v1[] __initconst = {
+	BCM47XX_GPIO_KEY(4, KEY_RESTART),
+	BCM47XX_GPIO_KEY(6, KEY_WPS_BUTTON),
+	BCM47XX_GPIO_KEY(8, KEY_RFKILL),
+};
+
+static const struct gpio_keys_button
+bcm47xx_buttons_netgear_wndr3700v3[] __initconst = {
+	BCM47XX_GPIO_KEY(2, KEY_RFKILL),
+	BCM47XX_GPIO_KEY(3, KEY_RESTART),
+	BCM47XX_GPIO_KEY(4, KEY_WPS_BUTTON),
+};
+
+static const struct gpio_keys_button
+bcm47xx_buttons_netgear_wndr4500v1[] __initconst = {
+	BCM47XX_GPIO_KEY(4, KEY_WPS_BUTTON),
+	BCM47XX_GPIO_KEY(5, KEY_RFKILL),
+	BCM47XX_GPIO_KEY(6, KEY_RESTART),
+};
+
+static const struct gpio_keys_button
+bcm47xx_buttons_netgear_wnr834bv2[] __initconst = {
+	BCM47XX_GPIO_KEY(6, KEY_RESTART),
+};
+
+/* SimpleTech */
+
+static const struct gpio_keys_button
+bcm47xx_buttons_simpletech_simpleshare[] __initconst = {
+	BCM47XX_GPIO_KEY(0, KEY_RESTART),
+};
+
+/**************************************************
+ * Init
+ **************************************************/
+
+static struct gpio_keys_platform_data bcm47xx_button_pdata;
+
+static struct platform_device bcm47xx_buttons_gpio_keys = {
+	.name = "gpio-keys",
+	.dev = {
+		.platform_data = &bcm47xx_button_pdata,
+	}
+};
+
+/* Copy data from __initconst */
+static int __init bcm47xx_buttons_copy(const struct gpio_keys_button *buttons,
+				       size_t nbuttons)
+{
+	size_t size = nbuttons * sizeof(*buttons);
+
+	bcm47xx_button_pdata.buttons = kmalloc(size, GFP_KERNEL);
+	if (!bcm47xx_button_pdata.buttons)
+		return -ENOMEM;
+	memcpy(bcm47xx_button_pdata.buttons, buttons, size);
+	bcm47xx_button_pdata.nbuttons = nbuttons;
+
+	return 0;
+}
+
+#define bcm47xx_copy_bdata(dev_buttons)					\
+	bcm47xx_buttons_copy(dev_buttons, ARRAY_SIZE(dev_buttons));
+
+int __init bcm47xx_buttons_register(void)
+{
+	enum bcm47xx_board board = bcm47xx_board_get();
+	int err;
+
+	switch (board) {
+	case BCM47XX_BOARD_ASUS_RTN12:
+		err = bcm47xx_copy_bdata(bcm47xx_buttons_asus_rtn12);
+		break;
+	case BCM47XX_BOARD_ASUS_RTN16:
+		err = bcm47xx_copy_bdata(bcm47xx_buttons_asus_rtn16);
+		break;
+	case BCM47XX_BOARD_ASUS_RTN66U:
+		err = bcm47xx_copy_bdata(bcm47xx_buttons_asus_rtn66u);
+		break;
+	case BCM47XX_BOARD_ASUS_WL300G:
+		err = bcm47xx_copy_bdata(bcm47xx_buttons_asus_wl300g);
+		break;
+	case BCM47XX_BOARD_ASUS_WL320GE:
+		err = bcm47xx_copy_bdata(bcm47xx_buttons_asus_wl320ge);
+		break;
+	case BCM47XX_BOARD_ASUS_WL330GE:
+		err = bcm47xx_copy_bdata(bcm47xx_buttons_asus_wl330ge);
+		break;
+	case BCM47XX_BOARD_ASUS_WL500GD:
+		err = bcm47xx_copy_bdata(bcm47xx_buttons_asus_wl500gd);
+		break;
+	case BCM47XX_BOARD_ASUS_WL500GPV1:
+		err = bcm47xx_copy_bdata(bcm47xx_buttons_asus_wl500gpv1);
+		break;
+	case BCM47XX_BOARD_ASUS_WL500GPV2:
+		err = bcm47xx_copy_bdata(bcm47xx_buttons_asus_wl500gpv2);
+		break;
+	case BCM47XX_BOARD_ASUS_WL500W:
+		err = bcm47xx_copy_bdata(bcm47xx_buttons_asus_wl500w);
+		break;
+	case BCM47XX_BOARD_ASUS_WL520GC:
+		err = bcm47xx_copy_bdata(bcm47xx_buttons_asus_wl520gc);
+		break;
+	case BCM47XX_BOARD_ASUS_WL520GU:
+		err = bcm47xx_copy_bdata(bcm47xx_buttons_asus_wl520gu);
+		break;
+	case BCM47XX_BOARD_ASUS_WL700GE:
+		err = bcm47xx_copy_bdata(bcm47xx_buttons_asus_wl700ge);
+		break;
+	case BCM47XX_BOARD_ASUS_WLHDD:
+		err = bcm47xx_copy_bdata(bcm47xx_buttons_asus_wlhdd);
+		break;
+
+	case BCM47XX_BOARD_BELKIN_F7D4301:
+		err = bcm47xx_copy_bdata(bcm47xx_buttons_belkin_f7d4301);
+		break;
+
+	case BCM47XX_BOARD_BUFFALO_WHR2_A54G54:
+		err = bcm47xx_copy_bdata(bcm47xx_buttons_buffalo_whr2_a54g54);
+		break;
+	case BCM47XX_BOARD_BUFFALO_WHR_G125:
+		err = bcm47xx_copy_bdata(bcm47xx_buttons_buffalo_whr_g125);
+		break;
+	case BCM47XX_BOARD_BUFFALO_WHR_G54S:
+		err = bcm47xx_copy_bdata(bcm47xx_buttons_buffalo_whr_g54s);
+		break;
+	case BCM47XX_BOARD_BUFFALO_WHR_HP_G54:
+		err = bcm47xx_copy_bdata(bcm47xx_buttons_buffalo_whr_hp_g54);
+		break;
+	case BCM47XX_BOARD_BUFFALO_WZR_G300N:
+		err = bcm47xx_copy_bdata(bcm47xx_buttons_buffalo_wzr_g300n);
+		break;
+	case BCM47XX_BOARD_BUFFALO_WZR_RS_G54:
+		err = bcm47xx_copy_bdata(bcm47xx_buttons_buffalo_wzr_rs_g54);
+		break;
+	case BCM47XX_BOARD_BUFFALO_WZR_RS_G54HP:
+		err = bcm47xx_copy_bdata(bcm47xx_buttons_buffalo_wzr_rs_g54hp);
+		break;
+
+	case BCM47XX_BOARD_DELL_TM2300:
+		err = bcm47xx_copy_bdata(bcm47xx_buttons_dell_tm2300);
+		break;
+
+	case BCM47XX_BOARD_DLINK_DIR130:
+		err = bcm47xx_copy_bdata(bcm47xx_buttons_dlink_dir130);
+		break;
+	case BCM47XX_BOARD_DLINK_DIR330:
+		err = bcm47xx_copy_bdata(bcm47xx_buttons_dlink_dir330);
+		break;
+
+	case BCM47XX_BOARD_HUAWEI_E970:
+		err = bcm47xx_copy_bdata(bcm47xx_buttons_huawei_e970);
+		break;
+
+	case BCM47XX_BOARD_LINKSYS_E1000V1:
+		err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_e1000v1);
+		break;
+	case BCM47XX_BOARD_LINKSYS_E1000V21:
+		err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_e1000v21);
+		break;
+	case BCM47XX_BOARD_LINKSYS_E2000V1:
+		err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_e2000v1);
+		break;
+	case BCM47XX_BOARD_LINKSYS_E3000V1:
+		err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_e3000v1);
+		break;
+	case BCM47XX_BOARD_LINKSYS_E3200V1:
+		err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_e3200v1);
+		break;
+	case BCM47XX_BOARD_LINKSYS_E4200V1:
+		err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_e4200v1);
+		break;
+	case BCM47XX_BOARD_LINKSYS_WRT150NV1:
+		err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_wrt150nv1);
+		break;
+	case BCM47XX_BOARD_LINKSYS_WRT150NV11:
+		err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_wrt150nv11);
+		break;
+	case BCM47XX_BOARD_LINKSYS_WRT160NV1:
+		err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_wrt160nv1);
+		break;
+	case BCM47XX_BOARD_LINKSYS_WRT160NV3:
+		err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_wrt160nv3);
+		break;
+	case BCM47XX_BOARD_LINKSYS_WRT300NV11:
+		err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_wrt300nv11);
+		break;
+	case BCM47XX_BOARD_LINKSYS_WRT310NV1:
+		err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_wrt310nv1);
+		break;
+	case BCM47XX_BOARD_LINKSYS_WRT610NV1:
+		err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_wrt610nv1);
+		break;
+	case BCM47XX_BOARD_LINKSYS_WRT610NV2:
+		err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_wrt610nv2);
+		break;
+
+	case BCM47XX_BOARD_MOTOROLA_WE800G:
+		err = bcm47xx_copy_bdata(bcm47xx_buttons_motorola_we800g);
+		break;
+	case BCM47XX_BOARD_MOTOROLA_WR850GP:
+		err = bcm47xx_copy_bdata(bcm47xx_buttons_motorola_wr850gp);
+		break;
+	case BCM47XX_BOARD_MOTOROLA_WR850GV2V3:
+		err = bcm47xx_copy_bdata(bcm47xx_buttons_motorola_wr850gv2v3);
+		break;
+
+	case BCM47XX_BOARD_NETGEAR_WNDR3400V1:
+		err = bcm47xx_copy_bdata(bcm47xx_buttons_netgear_wndr3400v1);
+		break;
+	case BCM47XX_BOARD_NETGEAR_WNDR3700V3:
+		err = bcm47xx_copy_bdata(bcm47xx_buttons_netgear_wndr3700v3);
+		break;
+	case BCM47XX_BOARD_NETGEAR_WNDR4500V1:
+		err = bcm47xx_copy_bdata(bcm47xx_buttons_netgear_wndr4500v1);
+		break;
+	case BCM47XX_BOARD_NETGEAR_WNR834BV2:
+		err = bcm47xx_copy_bdata(bcm47xx_buttons_netgear_wnr834bv2);
+		break;
+
+	case BCM47XX_BOARD_SIMPLETECH_SIMPLESHARE:
+		err = bcm47xx_copy_bdata(bcm47xx_buttons_simpletech_simpleshare);
+		break;
+
+	default:
+		pr_debug("No buttons configuration found for this device\n");
+		return -ENOTSUPP;
+	}
+
+	if (err)
+		return -ENOMEM;
+
+	err = platform_device_register(&bcm47xx_buttons_gpio_keys);
+	if (err) {
+		pr_err("Failed to register platform device: %d\n", err);
+		return err;
+	}
+
+	return 0;
+}

arch/mips/bcm47xx/irq.c

@@ -25,10 +25,11 @@
 #include <linux/types.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
+#include <asm/setup.h>
 #include <asm/irq_cpu.h>
 #include <bcm47xx.h>
 
-void plat_irq_dispatch(void)
+asmlinkage void plat_irq_dispatch(void)
 {
 	u32 cause;
 
@@ -50,6 +51,18 @@ void plat_irq_dispatch(void)
 		do_IRQ(6);
 }
 
+#define DEFINE_HWx_IRQDISPATCH(x)					\
+	static void bcm47xx_hw ## x ## _irqdispatch(void)		\
+	{								\
+		do_IRQ(x);						\
+	}
+DEFINE_HWx_IRQDISPATCH(2)
+DEFINE_HWx_IRQDISPATCH(3)
+DEFINE_HWx_IRQDISPATCH(4)
+DEFINE_HWx_IRQDISPATCH(5)
+DEFINE_HWx_IRQDISPATCH(6)
+DEFINE_HWx_IRQDISPATCH(7)
+
 void __init arch_init_irq(void)
 {
 #ifdef CONFIG_BCM47XX_BCMA
@@ -64,4 +77,14 @@ void __init arch_init_irq(void)
 	}
 #endif
 	mips_cpu_irq_init();
+
+	if (cpu_has_vint) {
+		pr_info("Setting up vectored interrupts\n");
+		set_vi_handler(2, bcm47xx_hw2_irqdispatch);
+		set_vi_handler(3, bcm47xx_hw3_irqdispatch);
+		set_vi_handler(4, bcm47xx_hw4_irqdispatch);
+		set_vi_handler(5, bcm47xx_hw5_irqdispatch);
+		set_vi_handler(6, bcm47xx_hw6_irqdispatch);
+		set_vi_handler(7, bcm47xx_hw7_irqdispatch);
+	}
 }

arch/mips/bcm47xx/leds.c

@@ -0,0 +1,542 @@
+#include "bcm47xx_private.h"
+
+#include <linux/leds.h>
+#include <bcm47xx_board.h>
+
+/**************************************************
+ * Database
+ **************************************************/
+
+#define BCM47XX_GPIO_LED(_gpio, _color, _function, _active_low,		\
+			 _default_state)				\
+	{								\
+		.name		= "bcm47xx:" _color ":" _function,	\
+		.gpio		= _gpio,				\
+		.active_low	= _active_low,				\
+		.default_state	= _default_state,			\
+	}
+
+#define BCM47XX_GPIO_LED_TRIGGER(_gpio, _color, _function, _active_low,	\
+				 _default_trigger)			\
+	{								\
+		.name		= "bcm47xx:" _color ":" _function,	\
+		.gpio		= _gpio,				\
+		.active_low	= _active_low,				\
+		.default_state	= LEDS_GPIO_DEFSTATE_OFF,		\
+		.default_trigger	= _default_trigger,		\
+	}
+
+/* Asus */
+
+static const struct gpio_led
+bcm47xx_leds_asus_rtn12[] __initconst = {
+	BCM47XX_GPIO_LED(2, "unk", "power", 1, LEDS_GPIO_DEFSTATE_ON),
+	BCM47XX_GPIO_LED(7, "unk", "wlan", 0, LEDS_GPIO_DEFSTATE_OFF),
+};
+
+static const struct gpio_led
+bcm47xx_leds_asus_rtn16[] __initconst = {
+	BCM47XX_GPIO_LED(1, "blue", "power", 1, LEDS_GPIO_DEFSTATE_ON),
+	BCM47XX_GPIO_LED(7, "blue", "wlan", 0, LEDS_GPIO_DEFSTATE_OFF),
+};
+
+static const struct gpio_led
+bcm47xx_leds_asus_rtn66u[] __initconst = {
+	BCM47XX_GPIO_LED(12, "unk", "power", 1, LEDS_GPIO_DEFSTATE_ON),
+	BCM47XX_GPIO_LED(15, "unk", "usb", 1, LEDS_GPIO_DEFSTATE_OFF),
+};
+
+static const struct gpio_led
+bcm47xx_leds_asus_wl300g[] __initconst = {
+	BCM47XX_GPIO_LED(0, "unk", "power", 1, LEDS_GPIO_DEFSTATE_ON),
+};
+
+static const struct gpio_led
+bcm47xx_leds_asus_wl320ge[] __initconst = {
+	BCM47XX_GPIO_LED(0, "unk", "wlan", 1, LEDS_GPIO_DEFSTATE_OFF),
+	BCM47XX_GPIO_LED(2, "unk", "power", 1, LEDS_GPIO_DEFSTATE_ON),
+	BCM47XX_GPIO_LED(11, "unk", "link", 1, LEDS_GPIO_DEFSTATE_OFF),
+};
+
+static const struct gpio_led
+bcm47xx_leds_asus_wl330ge[] __initconst = {
+	BCM47XX_GPIO_LED(0, "unk", "power", 1, LEDS_GPIO_DEFSTATE_ON),
+};
+
+static const struct gpio_led
+bcm47xx_leds_asus_wl500gd[] __initconst = {
+	BCM47XX_GPIO_LED(0, "unk", "power", 1, LEDS_GPIO_DEFSTATE_ON),
+};
+
+static const struct gpio_led
+bcm47xx_leds_asus_wl500gpv1[] __initconst = {
+	BCM47XX_GPIO_LED(1, "unk", "power", 1, LEDS_GPIO_DEFSTATE_ON),
+};
+
+static const struct gpio_led
+bcm47xx_leds_asus_wl500gpv2[] __initconst = {
+	BCM47XX_GPIO_LED(0, "unk", "power", 1, LEDS_GPIO_DEFSTATE_ON),
+	BCM47XX_GPIO_LED(1, "unk", "wlan", 1, LEDS_GPIO_DEFSTATE_OFF),
+};
+
+static const struct gpio_led
+bcm47xx_leds_asus_wl500w[] __initconst = {
+	BCM47XX_GPIO_LED(5, "unk", "power", 1, LEDS_GPIO_DEFSTATE_ON),
+};
+
+static const struct gpio_led
+bcm47xx_leds_asus_wl520gc[] __initconst = {
+	BCM47XX_GPIO_LED(0, "unk", "power", 1, LEDS_GPIO_DEFSTATE_ON),
+	BCM47XX_GPIO_LED(1, "unk", "wlan", 1, LEDS_GPIO_DEFSTATE_OFF),
+};
+
+static const struct gpio_led
+bcm47xx_leds_asus_wl520gu[] __initconst = {
+	BCM47XX_GPIO_LED(0, "unk", "power", 1, LEDS_GPIO_DEFSTATE_ON),
+	BCM47XX_GPIO_LED(1, "unk", "wlan", 1, LEDS_GPIO_DEFSTATE_OFF),
+};
+
+static const struct gpio_led
+bcm47xx_leds_asus_wl700ge[] __initconst = {
+	BCM47XX_GPIO_LED(1, "unk", "power", 1, LEDS_GPIO_DEFSTATE_ON), /* Labeled "READY" (there is no "power" LED). Originally ON, flashing on USB activity. */
+};
+
+static const struct gpio_led
+bcm47xx_leds_asus_wlhdd[] __initconst = {
+	BCM47XX_GPIO_LED(0, "unk", "power", 1, LEDS_GPIO_DEFSTATE_ON),
+	BCM47XX_GPIO_LED(2, "unk", "usb", 1, LEDS_GPIO_DEFSTATE_OFF),
+};
+
+/* Belkin */
+
+static const struct gpio_led
+bcm47xx_leds_belkin_f7d4301[] __initconst = {
+	BCM47XX_GPIO_LED(10, "green", "power", 1, LEDS_GPIO_DEFSTATE_ON),
+	BCM47XX_GPIO_LED(11, "amber", "power", 1, LEDS_GPIO_DEFSTATE_OFF),
+	BCM47XX_GPIO_LED(12, "unk", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
+	BCM47XX_GPIO_LED(13, "unk", "wlan", 1, LEDS_GPIO_DEFSTATE_OFF),
+	BCM47XX_GPIO_LED(14, "unk", "usb0", 1, LEDS_GPIO_DEFSTATE_OFF),
+	BCM47XX_GPIO_LED(15, "unk", "usb1", 1, LEDS_GPIO_DEFSTATE_OFF),
+};
+
+/* Buffalo */
+
+static const struct gpio_led
+bcm47xx_leds_buffalo_whr2_a54g54[] __initconst = {
+	BCM47XX_GPIO_LED(7, "unk", "diag", 1, LEDS_GPIO_DEFSTATE_OFF),
+};
+
+static const struct gpio_led
+bcm47xx_leds_buffalo_whr_g125[] __initconst = {
+	BCM47XX_GPIO_LED(1, "unk", "bridge", 1, LEDS_GPIO_DEFSTATE_OFF),
+	BCM47XX_GPIO_LED(2, "unk", "wlan", 1, LEDS_GPIO_DEFSTATE_OFF),
+	BCM47XX_GPIO_LED(3, "unk", "internal", 1, LEDS_GPIO_DEFSTATE_OFF),
+	BCM47XX_GPIO_LED(6, "unk", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
+	BCM47XX_GPIO_LED(7, "unk", "diag", 1, LEDS_GPIO_DEFSTATE_OFF),
+};
+
+static const struct gpio_led
+bcm47xx_leds_buffalo_whr_g54s[] __initconst = {
+	BCM47XX_GPIO_LED(1, "unk", "bridge", 1, LEDS_GPIO_DEFSTATE_OFF),
+	BCM47XX_GPIO_LED(2, "unk", "wlan", 1, LEDS_GPIO_DEFSTATE_OFF),
+	BCM47XX_GPIO_LED(3, "unk", "internal", 1, LEDS_GPIO_DEFSTATE_OFF),
+	BCM47XX_GPIO_LED(6, "unk", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
+	BCM47XX_GPIO_LED(7, "unk", "diag", 1, LEDS_GPIO_DEFSTATE_OFF),
+};
+
+static const struct gpio_led
+bcm47xx_leds_buffalo_whr_hp_g54[] __initconst = {
+	BCM47XX_GPIO_LED(1, "unk", "bridge", 1, LEDS_GPIO_DEFSTATE_OFF),
+	BCM47XX_GPIO_LED(2, "unk", "wlan", 1, LEDS_GPIO_DEFSTATE_OFF),
+	BCM47XX_GPIO_LED(3, "unk", "internal", 1, LEDS_GPIO_DEFSTATE_OFF),
+	BCM47XX_GPIO_LED(6, "unk", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
+	BCM47XX_GPIO_LED(7, "unk", "diag", 1, LEDS_GPIO_DEFSTATE_OFF),
+};
+
+static const struct gpio_led
+bcm47xx_leds_buffalo_wzr_g300n[] __initconst = {
+	BCM47XX_GPIO_LED(1, "unk", "bridge", 1, LEDS_GPIO_DEFSTATE_OFF),
+	BCM47XX_GPIO_LED(6, "unk", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
+	BCM47XX_GPIO_LED(7, "unk", "diag", 1, LEDS_GPIO_DEFSTATE_OFF),
+};
+
+static const struct gpio_led
+bcm47xx_leds_buffalo_wzr_rs_g54[] __initconst = {
+	BCM47XX_GPIO_LED(6, "unk", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
+	BCM47XX_GPIO_LED(1, "unk", "vpn", 1, LEDS_GPIO_DEFSTATE_OFF),
+	BCM47XX_GPIO_LED(7, "unk", "diag", 1, LEDS_GPIO_DEFSTATE_OFF),
+};
+
+static const struct gpio_led
+bcm47xx_leds_buffalo_wzr_rs_g54hp[] __initconst = {
+	BCM47XX_GPIO_LED(6, "unk", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
+	BCM47XX_GPIO_LED(1, "unk", "vpn", 1, LEDS_GPIO_DEFSTATE_OFF),
+	BCM47XX_GPIO_LED(7, "unk", "diag", 1, LEDS_GPIO_DEFSTATE_OFF),
+};
+
+/* Dell */
+
+static const struct gpio_led
+bcm47xx_leds_dell_tm2300[] __initconst = {
+	BCM47XX_GPIO_LED(6, "unk", "wlan", 1, LEDS_GPIO_DEFSTATE_OFF),
+	BCM47XX_GPIO_LED(7, "unk", "power", 1, LEDS_GPIO_DEFSTATE_ON),
+};
+
+/* D-Link */
+
+static const struct gpio_led
+bcm47xx_leds_dlink_dir130[] __initconst = {
+	BCM47XX_GPIO_LED_TRIGGER(0, "green", "status", 1, "timer"), /* Originally blinking when device is ready, separated from "power" LED */
+	BCM47XX_GPIO_LED(6, "blue", "unk", 1, LEDS_GPIO_DEFSTATE_OFF),
+};
+
+static const struct gpio_led
+bcm47xx_leds_dlink_dir330[] __initconst = {
+	BCM47XX_GPIO_LED_TRIGGER(0, "green", "status", 1, "timer"), /* Originally blinking when device is ready, separated from "power" LED */
+	BCM47XX_GPIO_LED(4, "unk", "usb", 1, LEDS_GPIO_DEFSTATE_OFF),
+	BCM47XX_GPIO_LED(6, "blue", "unk", 1, LEDS_GPIO_DEFSTATE_OFF),
+};
+
+/* Huawei */
+
+static const struct gpio_led
+bcm47xx_leds_huawei_e970[] __initconst = {
+	BCM47XX_GPIO_LED(0, "unk", "wlan", 0, LEDS_GPIO_DEFSTATE_OFF),
+};
+
+/* Linksys */
+
+static const struct gpio_led
+bcm47xx_leds_linksys_e1000v1[] __initconst = {
+	BCM47XX_GPIO_LED(0, "blue", "wlan", 0, LEDS_GPIO_DEFSTATE_OFF),
+	BCM47XX_GPIO_LED(1, "blue", "power", 0, LEDS_GPIO_DEFSTATE_ON),
+	BCM47XX_GPIO_LED(2, "amber", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
+	BCM47XX_GPIO_LED(4, "blue", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
+};
+
+static const struct gpio_led
+bcm47xx_leds_linksys_e1000v21[] __initconst = {
+	BCM47XX_GPIO_LED(5, "unk", "wlan", 0, LEDS_GPIO_DEFSTATE_OFF),
+	BCM47XX_GPIO_LED(6, "unk", "power", 1, LEDS_GPIO_DEFSTATE_ON),
+	BCM47XX_GPIO_LED(7, "amber", "wps", 0, LEDS_GPIO_DEFSTATE_OFF),
+	BCM47XX_GPIO_LED(8, "blue", "wps", 0, LEDS_GPIO_DEFSTATE_OFF),
+};
+
+static const struct gpio_led
+bcm47xx_leds_linksys_e2000v1[] __initconst = {
+	BCM47XX_GPIO_LED(1, "blue", "wlan", 0, LEDS_GPIO_DEFSTATE_OFF),
+	BCM47XX_GPIO_LED(2, "blue", "power", 0, LEDS_GPIO_DEFSTATE_ON),
+	BCM47XX_GPIO_LED(3, "blue", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
+	BCM47XX_GPIO_LED(4, "amber", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
+};
+
+static const struct gpio_led
+bcm47xx_leds_linksys_e3000v1[] __initconst = {
+	BCM47XX_GPIO_LED(0, "amber", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
+	BCM47XX_GPIO_LED(1, "unk", "wlan", 0, LEDS_GPIO_DEFSTATE_OFF),
+	BCM47XX_GPIO_LED(3, "blue", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
+	BCM47XX_GPIO_LED(5, "unk", "power", 0, LEDS_GPIO_DEFSTATE_ON),
+	BCM47XX_GPIO_LED(7, "unk", "usb", 0, LEDS_GPIO_DEFSTATE_OFF),
+};
+
+static const struct gpio_led
+bcm47xx_leds_linksys_e3200v1[] __initconst = {
+	BCM47XX_GPIO_LED(3, "green", "power", 1, LEDS_GPIO_DEFSTATE_ON),
+};
+
+static const struct gpio_led
+bcm47xx_leds_linksys_e4200v1[] __initconst = {
+	BCM47XX_GPIO_LED(5, "white", "power", 1, LEDS_GPIO_DEFSTATE_ON),
+};
+
+static const struct gpio_led
+bcm47xx_leds_linksys_wrt150nv1[] __initconst = {
+	BCM47XX_GPIO_LED(1, "unk", "power", 0, LEDS_GPIO_DEFSTATE_ON),
+	BCM47XX_GPIO_LED(3, "amber", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
+	BCM47XX_GPIO_LED(5, "green", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
+};
+
+static const struct gpio_led
+bcm47xx_leds_linksys_wrt150nv11[] __initconst = {
+	BCM47XX_GPIO_LED(1, "unk", "power", 0, LEDS_GPIO_DEFSTATE_ON),
+	BCM47XX_GPIO_LED(3, "amber", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
+	BCM47XX_GPIO_LED(5, "green", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
+};
+
+static const struct gpio_led
+bcm47xx_leds_linksys_wrt160nv1[] __initconst = {
+	BCM47XX_GPIO_LED(1, "unk", "power", 0, LEDS_GPIO_DEFSTATE_ON),
+	BCM47XX_GPIO_LED(3, "amber", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
+	BCM47XX_GPIO_LED(5, "blue", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
+};
+
+static const struct gpio_led
+bcm47xx_leds_linksys_wrt160nv3[] __initconst = {
+	BCM47XX_GPIO_LED(1, "unk", "power", 0, LEDS_GPIO_DEFSTATE_ON),
+	BCM47XX_GPIO_LED(2, "amber", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
+	BCM47XX_GPIO_LED(4, "blue", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
+};
+
+static const struct gpio_led
+bcm47xx_leds_linksys_wrt300nv11[] __initconst = {
+	BCM47XX_GPIO_LED(1, "unk", "power", 0, LEDS_GPIO_DEFSTATE_ON),
+	BCM47XX_GPIO_LED(3, "amber", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
+	BCM47XX_GPIO_LED(5, "green", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
+};
+
+static const struct gpio_led
+bcm47xx_leds_linksys_wrt310nv1[] __initconst = {
+	BCM47XX_GPIO_LED(1, "blue", "power", 0, LEDS_GPIO_DEFSTATE_ON),
+	BCM47XX_GPIO_LED(3, "amber", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
+	BCM47XX_GPIO_LED(9, "blue", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
+};
+
+static const struct gpio_led
+bcm47xx_leds_linksys_wrt610nv1[] __initconst = {
+	BCM47XX_GPIO_LED(0, "unk", "usb",  1, LEDS_GPIO_DEFSTATE_OFF),
+	BCM47XX_GPIO_LED(1, "unk", "power",  0, LEDS_GPIO_DEFSTATE_OFF),
+	BCM47XX_GPIO_LED(3, "amber", "wps",  1, LEDS_GPIO_DEFSTATE_OFF),
+	BCM47XX_GPIO_LED(9, "blue", "wps",  1, LEDS_GPIO_DEFSTATE_OFF),
+};
+
+static const struct gpio_led
+bcm47xx_leds_linksys_wrt610nv2[] __initconst = {
+	BCM47XX_GPIO_LED(0, "amber", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
+	BCM47XX_GPIO_LED(1, "unk", "wlan", 0, LEDS_GPIO_DEFSTATE_OFF),
+	BCM47XX_GPIO_LED(3, "blue", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
+	BCM47XX_GPIO_LED(5, "unk", "power", 0, LEDS_GPIO_DEFSTATE_ON),
+	BCM47XX_GPIO_LED(7, "unk", "usb", 0, LEDS_GPIO_DEFSTATE_OFF),
+};
+
+/* Motorola */
+
+static const struct gpio_led
+bcm47xx_leds_motorola_we800g[] __initconst = {
+	BCM47XX_GPIO_LED(1, "amber", "wlan", 0, LEDS_GPIO_DEFSTATE_OFF),
+	BCM47XX_GPIO_LED(2, "unk", "unk", 1, LEDS_GPIO_DEFSTATE_OFF), /* There are only 3 LEDs: Power, Wireless and Device (ethernet) */
+	BCM47XX_GPIO_LED(4, "green", "power", 0, LEDS_GPIO_DEFSTATE_ON),
+};
+
+static const struct gpio_led
+bcm47xx_leds_motorola_wr850gp[] __initconst = {
+	BCM47XX_GPIO_LED(0, "unk", "wlan", 1, LEDS_GPIO_DEFSTATE_OFF),
+	BCM47XX_GPIO_LED(1, "unk", "power", 0, LEDS_GPIO_DEFSTATE_ON),
+	BCM47XX_GPIO_LED(6, "unk", "dmz", 1, LEDS_GPIO_DEFSTATE_OFF),
+	BCM47XX_GPIO_LED(7, "unk", "diag", 1, LEDS_GPIO_DEFSTATE_OFF),
+};
+
+static const struct gpio_led
+bcm47xx_leds_motorola_wr850gv2v3[] __initconst = {
+	BCM47XX_GPIO_LED(0, "unk", "wlan", 1, LEDS_GPIO_DEFSTATE_OFF),
+	BCM47XX_GPIO_LED(1, "unk", "power", 0, LEDS_GPIO_DEFSTATE_ON),
+	BCM47XX_GPIO_LED(7, "unk", "diag", 1, LEDS_GPIO_DEFSTATE_OFF),
+};
+
+/* Netgear */
+
+static const struct gpio_led
+bcm47xx_leds_netgear_wndr3400v1[] __initconst = {
+	BCM47XX_GPIO_LED(2, "green", "usb", 1, LEDS_GPIO_DEFSTATE_OFF),
+	BCM47XX_GPIO_LED(3, "green", "power", 0, LEDS_GPIO_DEFSTATE_ON),
+	BCM47XX_GPIO_LED(7, "amber", "power", 0, LEDS_GPIO_DEFSTATE_OFF),
+};
+
+static const struct gpio_led
+bcm47xx_leds_netgear_wndr4500v1[] __initconst = {
+	BCM47XX_GPIO_LED(1, "green", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
+	BCM47XX_GPIO_LED(2, "green", "power", 1, LEDS_GPIO_DEFSTATE_ON),
+	BCM47XX_GPIO_LED(3, "amber", "power", 1, LEDS_GPIO_DEFSTATE_OFF),
+	BCM47XX_GPIO_LED(8, "green", "usb1", 1, LEDS_GPIO_DEFSTATE_OFF),
+	BCM47XX_GPIO_LED(9, "green", "2ghz", 1, LEDS_GPIO_DEFSTATE_OFF),
+	BCM47XX_GPIO_LED(11, "blue", "5ghz", 1, LEDS_GPIO_DEFSTATE_OFF),
+	BCM47XX_GPIO_LED(14, "green", "usb2", 1, LEDS_GPIO_DEFSTATE_OFF),
+};
+
+static const struct gpio_led
+bcm47xx_leds_netgear_wnr834bv2[] __initconst = {
+	BCM47XX_GPIO_LED(2, "green", "power", 0, LEDS_GPIO_DEFSTATE_ON),
+	BCM47XX_GPIO_LED(3, "amber", "power", 0, LEDS_GPIO_DEFSTATE_OFF),
+	BCM47XX_GPIO_LED(7, "unk", "connected", 0, LEDS_GPIO_DEFSTATE_OFF),
+};
+
+/* SimpleTech */
+
+static const struct gpio_led
+bcm47xx_leds_simpletech_simpleshare[] __initconst = {
+	BCM47XX_GPIO_LED(1, "unk", "status", 1, LEDS_GPIO_DEFSTATE_OFF), /* "Ready" LED */
+};
+
+/**************************************************
+ * Init
+ **************************************************/
+
+static struct gpio_led_platform_data bcm47xx_leds_pdata;
+
+#define bcm47xx_set_pdata(dev_leds) do {				\
+	bcm47xx_leds_pdata.leds = dev_leds;				\
+	bcm47xx_leds_pdata.num_leds = ARRAY_SIZE(dev_leds);		\
+} while (0)
+
+void __init bcm47xx_leds_register(void)
+{
+	enum bcm47xx_board board = bcm47xx_board_get();
+
+	switch (board) {
+	case BCM47XX_BOARD_ASUS_RTN12:
+		bcm47xx_set_pdata(bcm47xx_leds_asus_rtn12);
+		break;
+	case BCM47XX_BOARD_ASUS_RTN16:
+		bcm47xx_set_pdata(bcm47xx_leds_asus_rtn16);
+		break;
+	case BCM47XX_BOARD_ASUS_RTN66U:
+		bcm47xx_set_pdata(bcm47xx_leds_asus_rtn66u);
+		break;
+	case BCM47XX_BOARD_ASUS_WL300G:
+		bcm47xx_set_pdata(bcm47xx_leds_asus_wl300g);
+		break;
+	case BCM47XX_BOARD_ASUS_WL320GE:
+		bcm47xx_set_pdata(bcm47xx_leds_asus_wl320ge);
+		break;
+	case BCM47XX_BOARD_ASUS_WL330GE:
+		bcm47xx_set_pdata(bcm47xx_leds_asus_wl330ge);
+		break;
+	case BCM47XX_BOARD_ASUS_WL500GD:
+		bcm47xx_set_pdata(bcm47xx_leds_asus_wl500gd);
+		break;
+	case BCM47XX_BOARD_ASUS_WL500GPV1:
+		bcm47xx_set_pdata(bcm47xx_leds_asus_wl500gpv1);
+		break;
+	case BCM47XX_BOARD_ASUS_WL500GPV2:
+		bcm47xx_set_pdata(bcm47xx_leds_asus_wl500gpv2);
+		break;
+	case BCM47XX_BOARD_ASUS_WL500W:
+		bcm47xx_set_pdata(bcm47xx_leds_asus_wl500w);
+		break;
+	case BCM47XX_BOARD_ASUS_WL520GC:
+		bcm47xx_set_pdata(bcm47xx_leds_asus_wl520gc);
+		break;
+	case BCM47XX_BOARD_ASUS_WL520GU:
+		bcm47xx_set_pdata(bcm47xx_leds_asus_wl520gu);
+		break;
+	case BCM47XX_BOARD_ASUS_WL700GE:
+		bcm47xx_set_pdata(bcm47xx_leds_asus_wl700ge);
+		break;
+	case BCM47XX_BOARD_ASUS_WLHDD:
+		bcm47xx_set_pdata(bcm47xx_leds_asus_wlhdd);
+		break;
+
+	case BCM47XX_BOARD_BELKIN_F7D4301:
+		bcm47xx_set_pdata(bcm47xx_leds_belkin_f7d4301);
+		break;
+
+	case BCM47XX_BOARD_BUFFALO_WHR2_A54G54:
+		bcm47xx_set_pdata(bcm47xx_leds_buffalo_whr2_a54g54);
+		break;
+	case BCM47XX_BOARD_BUFFALO_WHR_G125:
+		bcm47xx_set_pdata(bcm47xx_leds_buffalo_whr_g125);
+		break;
+	case BCM47XX_BOARD_BUFFALO_WHR_G54S:
+		bcm47xx_set_pdata(bcm47xx_leds_buffalo_whr_g54s);
+		break;
+	case BCM47XX_BOARD_BUFFALO_WHR_HP_G54:
+		bcm47xx_set_pdata(bcm47xx_leds_buffalo_whr_hp_g54);
+		break;
+	case BCM47XX_BOARD_BUFFALO_WZR_G300N:
+		bcm47xx_set_pdata(bcm47xx_leds_buffalo_wzr_g300n);
+		break;
+	case BCM47XX_BOARD_BUFFALO_WZR_RS_G54:
+		bcm47xx_set_pdata(bcm47xx_leds_buffalo_wzr_rs_g54);
+		break;
+	case BCM47XX_BOARD_BUFFALO_WZR_RS_G54HP:
+		bcm47xx_set_pdata(bcm47xx_leds_buffalo_wzr_rs_g54hp);
+		break;
+
+	case BCM47XX_BOARD_DELL_TM2300:
+		bcm47xx_set_pdata(bcm47xx_leds_dell_tm2300);
+		break;
+
+	case BCM47XX_BOARD_DLINK_DIR130:
+		bcm47xx_set_pdata(bcm47xx_leds_dlink_dir130);
+		break;
+	case BCM47XX_BOARD_DLINK_DIR330:
+		bcm47xx_set_pdata(bcm47xx_leds_dlink_dir330);
+		break;
+
+	case BCM47XX_BOARD_HUAWEI_E970:
+		bcm47xx_set_pdata(bcm47xx_leds_huawei_e970);
+		break;
+
+	case BCM47XX_BOARD_LINKSYS_E1000V1:
+		bcm47xx_set_pdata(bcm47xx_leds_linksys_e1000v1);
+		break;
+	case BCM47XX_BOARD_LINKSYS_E1000V21:
+		bcm47xx_set_pdata(bcm47xx_leds_linksys_e1000v21);
+		break;
+	case BCM47XX_BOARD_LINKSYS_E2000V1:
+		bcm47xx_set_pdata(bcm47xx_leds_linksys_e2000v1);
+		break;
+	case BCM47XX_BOARD_LINKSYS_E3000V1:
+		bcm47xx_set_pdata(bcm47xx_leds_linksys_e3000v1);
+		break;
+	case BCM47XX_BOARD_LINKSYS_E3200V1:
+		bcm47xx_set_pdata(bcm47xx_leds_linksys_e3200v1);
+		break;
+	case BCM47XX_BOARD_LINKSYS_E4200V1:
+		bcm47xx_set_pdata(bcm47xx_leds_linksys_e4200v1);
+		break;
+	case BCM47XX_BOARD_LINKSYS_WRT150NV1:
+		bcm47xx_set_pdata(bcm47xx_leds_linksys_wrt150nv1);
+		break;
+	case BCM47XX_BOARD_LINKSYS_WRT150NV11:
+		bcm47xx_set_pdata(bcm47xx_leds_linksys_wrt150nv11);
+		break;
+	case BCM47XX_BOARD_LINKSYS_WRT160NV1:
+		bcm47xx_set_pdata(bcm47xx_leds_linksys_wrt160nv1);
+		break;
+	case BCM47XX_BOARD_LINKSYS_WRT160NV3:
+		bcm47xx_set_pdata(bcm47xx_leds_linksys_wrt160nv3);
+		break;
+	case BCM47XX_BOARD_LINKSYS_WRT300NV11:
+		bcm47xx_set_pdata(bcm47xx_leds_linksys_wrt300nv11);
+		break;
+	case BCM47XX_BOARD_LINKSYS_WRT310NV1:
+		bcm47xx_set_pdata(bcm47xx_leds_linksys_wrt310nv1);
+		break;
+	case BCM47XX_BOARD_LINKSYS_WRT610NV1:
+		bcm47xx_set_pdata(bcm47xx_leds_linksys_wrt610nv1);
+		break;
+	case BCM47XX_BOARD_LINKSYS_WRT610NV2:
+		bcm47xx_set_pdata(bcm47xx_leds_linksys_wrt610nv2);
+		break;
+
+	case BCM47XX_BOARD_MOTOROLA_WE800G:
+		bcm47xx_set_pdata(bcm47xx_leds_motorola_we800g);
+		break;
+	case BCM47XX_BOARD_MOTOROLA_WR850GP:
+		bcm47xx_set_pdata(bcm47xx_leds_motorola_wr850gp);
+		break;
+	case BCM47XX_BOARD_MOTOROLA_WR850GV2V3:
+		bcm47xx_set_pdata(bcm47xx_leds_motorola_wr850gv2v3);
+		break;
+
+	case BCM47XX_BOARD_NETGEAR_WNDR3400V1:
+		bcm47xx_set_pdata(bcm47xx_leds_netgear_wndr3400v1);
+		break;
+	case BCM47XX_BOARD_NETGEAR_WNDR4500V1:
+		bcm47xx_set_pdata(bcm47xx_leds_netgear_wndr4500v1);
+		break;
+	case BCM47XX_BOARD_NETGEAR_WNR834BV2:
+		bcm47xx_set_pdata(bcm47xx_leds_netgear_wnr834bv2);
+		break;
+
+	case BCM47XX_BOARD_SIMPLETECH_SIMPLESHARE:
+		bcm47xx_set_pdata(bcm47xx_leds_simpletech_simpleshare);
+		break;
+
+	default:
+		pr_debug("No LEDs configuration found for this device\n");
+		return;
+	}
+
+	gpio_led_register_device(-1, &bcm47xx_leds_pdata);
+}

arch/mips/bcm47xx/nvram.c

@@ -11,7 +11,6 @@
  * option) any later version.
  */
 
-#include <linux/init.h>
 #include <linux/types.h>
 #include <linux/module.h>
 #include <linux/ssb/ssb.h>
@@ -22,11 +21,11 @@
 #include <asm/mach-bcm47xx/bcm47xx.h>
 
 static char nvram_buf[NVRAM_SPACE];
+static const u32 nvram_sizes[] = {0x8000, 0xF000, 0x10000};
 
 static u32 find_nvram_size(u32 end)
 {
 	struct nvram_header *header;
-	u32 nvram_sizes[] = {0x8000, 0xF000, 0x10000};
 	int i;
 
 	for (i = 0; i < ARRAY_SIZE(nvram_sizes); i++) {

arch/mips/bcm47xx/prom.c

@@ -28,126 +28,27 @@
 #include <linux/types.h>
 #include <linux/kernel.h>
 #include <linux/spinlock.h>
+#include <linux/ssb/ssb_driver_chipcommon.h>
+#include <linux/ssb/ssb_regs.h>
 #include <linux/smp.h>
 #include <asm/bootinfo.h>
-#include <asm/fw/cfe/cfe_api.h>
-#include <asm/fw/cfe/cfe_error.h>
 #include <bcm47xx.h>
 #include <bcm47xx_board.h>
 
-static int cfe_cons_handle;
 
-static u16 get_chip_id(void)
-{
-	switch (bcm47xx_bus_type) {
-#ifdef CONFIG_BCM47XX_SSB
-	case BCM47XX_BUS_TYPE_SSB:
-		return bcm47xx_bus.ssb.chip_id;
-#endif
-#ifdef CONFIG_BCM47XX_BCMA
-	case BCM47XX_BUS_TYPE_BCMA:
-		return bcm47xx_bus.bcma.bus.chipinfo.id;
-#endif
-	}
-	return 0;
-}
+static char bcm47xx_system_type[20] = "Broadcom BCM47XX";
 
 const char *get_system_type(void)
 {
-	static char buf[50];
-	u16 chip_id = get_chip_id();
-
-	snprintf(buf, sizeof(buf),
-		 (chip_id > 0x9999) ? "Broadcom BCM%d (%s)" :
-				      "Broadcom BCM%04X (%s)",
-		 chip_id, bcm47xx_board_get_name());
-
-	return buf;
-}
-
-void prom_putchar(char c)
-{
-	while (cfe_write(cfe_cons_handle, &c, 1) == 0)
-		;
+	return bcm47xx_system_type;
 }
 
-static __init void prom_init_cfe(void)
+__init void bcm47xx_set_system_type(u16 chip_id)
 {
-	uint32_t cfe_ept;
-	uint32_t cfe_handle;
-	uint32_t cfe_eptseal;
-	int argc = fw_arg0;
-	char **envp = (char **) fw_arg2;
-	int *prom_vec = (int *) fw_arg3;
-
-	/*
-	 * Check if a loader was used; if NOT, the 4 arguments are
-	 * what CFE gives us (handle, 0, EPT and EPTSEAL)
-	 */
-	if (argc < 0) {
-		cfe_handle = (uint32_t)argc;
-		cfe_ept = (uint32_t)envp;
-		cfe_eptseal = (uint32_t)prom_vec;
-	} else {
-		if ((int)prom_vec < 0) {
-			/*
-			 * Old loader; all it gives us is the handle,
-			 * so use the "known" entrypoint and assume
-			 * the seal.
-			 */
-			cfe_handle = (uint32_t)prom_vec;
-			cfe_ept = 0xBFC00500;
-			cfe_eptseal = CFE_EPTSEAL;
-		} else {
-			/*
-			 * Newer loaders bundle the handle/ept/eptseal
-			 * Note: prom_vec is in the loader's useg
-			 * which is still alive in the TLB.
-			 */
-			cfe_handle = prom_vec[0];
-			cfe_ept = prom_vec[2];
-			cfe_eptseal = prom_vec[3];
-		}
-	}
-
-	if (cfe_eptseal != CFE_EPTSEAL) {
-		/* too early for panic to do any good */
-		printk(KERN_ERR "CFE's entrypoint seal doesn't match.");
-		while (1) ;
-	}
-
-	cfe_init(cfe_handle, cfe_ept);
-}
-
-static __init void prom_init_console(void)
-{
-	/* Initialize CFE console */
-	cfe_cons_handle = cfe_getstdhandle(CFE_STDHANDLE_CONSOLE);
-}
-
-static __init void prom_init_cmdline(void)
-{
-	static char buf[COMMAND_LINE_SIZE] __initdata;
-
-	/* Get the kernel command line from CFE */
-	if (cfe_getenv("LINUX_CMDLINE", buf, COMMAND_LINE_SIZE) >= 0) {
-		buf[COMMAND_LINE_SIZE - 1] = 0;
-		strcpy(arcs_cmdline, buf);
-	}
-
-	/* Force a console handover by adding a console= argument if needed,
-	 * as CFE is not available anymore later in the boot process. */
-	if ((strstr(arcs_cmdline, "console=")) == NULL) {
-		/* Try to read the default serial port used by CFE */
-		if ((cfe_getenv("BOOT_CONSOLE", buf, COMMAND_LINE_SIZE) < 0)
-		    || (strncmp("uart", buf, 4)))
-			/* Default to uart0 */
-			strcpy(buf, "uart0");
-
-		/* Compute the new command line */
-		snprintf(arcs_cmdline, COMMAND_LINE_SIZE, "%s console=ttyS%c,115200",
-			 arcs_cmdline, buf[4]);
-	}
+	snprintf(bcm47xx_system_type, sizeof(bcm47xx_system_type),
+		 (chip_id > 0x9999) ? "Broadcom BCM%d" :
+				      "Broadcom BCM%04X",
+		 chip_id);
 }
 
 static __init void prom_init_mem(void)
@@ -195,12 +96,16 @@ static __init void prom_init_mem(void)
 	add_memory_region(0, mem, BOOT_MEM_RAM);
 }
 
+/*
+ * This is the first serial on the chip common core, it is at this position
+ * for sb (ssb) and ai (bcma) bus.
+ */
+#define BCM47XX_SERIAL_ADDR (SSB_ENUM_BASE + SSB_CHIPCO_UART0_DATA)
+
 void __init prom_init(void)
 {
-	prom_init_cfe();
-	prom_init_console();
-	prom_init_cmdline();
 	prom_init_mem();
+	setup_8250_early_printk_port(CKSEG1ADDR(BCM47XX_SERIAL_ADDR), 0, 0);
 }
 
 void __init prom_free_prom_memory(void)

arch/mips/bcm47xx/serial.c

@@ -31,7 +31,8 @@ static int __init uart8250_init_ssb(void)
 
 	memset(&uart8250_data, 0,  sizeof(uart8250_data));
 
-	for (i = 0; i < mcore->nr_serial_ports; i++) {
+	for (i = 0; i < mcore->nr_serial_ports &&
+		    i < ARRAY_SIZE(uart8250_data) - 1; i++) {
 		struct plat_serial8250_port *p = &(uart8250_data[i]);
 		struct ssb_serial_port *ssb_port = &(mcore->serial_ports[i]);
 
@@ -55,7 +56,8 @@ static int __init uart8250_init_bcma(void)
 
 	memset(&uart8250_data, 0,  sizeof(uart8250_data));
 
-	for (i = 0; i < cc->nr_serial_ports; i++) {
+	for (i = 0; i < cc->nr_serial_ports &&
+		    i < ARRAY_SIZE(uart8250_data) - 1; i++) {
 		struct plat_serial8250_port *p = &(uart8250_data[i]);
 		struct bcma_serial_port *bcma_port;
 		bcma_port = &(cc->serial_ports[i]);

arch/mips/bcm47xx/setup.c

@@ -26,6 +26,8 @@
  *  675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
+#include "bcm47xx_private.h"
+
 #include <linux/export.h>
 #include <linux/types.h>
 #include <linux/ethtool.h>
@@ -35,6 +37,8 @@
 #include <linux/ssb/ssb_embedded.h>
 #include <linux/bcma/bcma_soc.h>
 #include <asm/bootinfo.h>
+#include <asm/idle.h>
+#include <asm/prom.h>
 #include <asm/reboot.h>
 #include <asm/time.h>
 #include <bcm47xx.h>
@@ -213,12 +217,14 @@ void __init plat_mem_setup(void)
 #ifdef CONFIG_BCM47XX_BCMA
 		bcm47xx_bus_type = BCM47XX_BUS_TYPE_BCMA;
 		bcm47xx_register_bcma();
+		bcm47xx_set_system_type(bcm47xx_bus.bcma.bus.chipinfo.id);
 #endif
 	} else {
 		printk(KERN_INFO "bcm47xx: using ssb bus\n");
 #ifdef CONFIG_BCM47XX_SSB
 		bcm47xx_bus_type = BCM47XX_BUS_TYPE_SSB;
 		bcm47xx_register_ssb();
+		bcm47xx_set_system_type(bcm47xx_bus.ssb.chip_id);
 #endif
 	}
 
@@ -226,8 +232,34 @@ void __init plat_mem_setup(void)
 	_machine_halt = bcm47xx_machine_halt;
 	pm_power_off = bcm47xx_machine_halt;
 	bcm47xx_board_detect();
+	mips_set_machine_name(bcm47xx_board_get_name());
 }
 
+static int __init bcm47xx_cpu_fixes(void)
+{
+	switch (bcm47xx_bus_type) {
+#ifdef CONFIG_BCM47XX_SSB
+	case BCM47XX_BUS_TYPE_SSB:
+		/* Nothing to do */
+		break;
+#endif
+#ifdef CONFIG_BCM47XX_BCMA
+	case BCM47XX_BUS_TYPE_BCMA:
+		/* The BCM4706 has a problem with the CPU wait instruction.
+		 * When r4k_wait or r4k_wait_irqoff is used will just hang and
+		 * not return from a msleep(). Removing the cpu_wait
+		 * functionality is a workaround for this problem. The BCM4716
+		 * does not have this problem.
+		 */
+		if (bcm47xx_bus.bcma.bus.chipinfo.id == BCMA_CHIP_ID_BCM4706)
+			cpu_wait = NULL;
+		break;
+#endif
+	}
+	return 0;
+}
+arch_initcall(bcm47xx_cpu_fixes);
+
 static struct fixed_phy_status bcm47xx_fixed_phy_status __initdata = {
 	.link	= 1,
 	.speed	= SPEED_100,
@@ -248,6 +280,9 @@ static int __init bcm47xx_register_bus_complete(void)
 		break;
 #endif
 	}
+	bcm47xx_buttons_register();
+	bcm47xx_leds_register();
+
 	fixed_phy_add(PHY_POLL, 0, &bcm47xx_fixed_phy_status);
 	return 0;
 }

arch/mips/bcm47xx/sprom.c

@@ -135,7 +135,7 @@ static void nvram_read_leddc(const char *prefix, const char *name,
 }
 
 static void nvram_read_macaddr(const char *prefix, const char *name,
-			       u8 (*val)[6], bool fallback)
+			       u8 val[6], bool fallback)
 {
 	char buf[100];
 	int err;
@@ -144,11 +144,11 @@ static void nvram_read_macaddr(const char *prefix, const char *name,
 	if (err < 0)
 		return;
 
-	bcm47xx_nvram_parse_macaddr(buf, *val);
+	bcm47xx_nvram_parse_macaddr(buf, val);
 }
 
 static void nvram_read_alpha2(const char *prefix, const char *name,
-			     char (*val)[2], bool fallback)
+			     char val[2], bool fallback)
 {
 	char buf[10];
 	int err;
@@ -162,7 +162,7 @@ static void nvram_read_alpha2(const char *prefix, const char *name,
 		pr_warn("alpha2 is too long %s\n", buf);
 		return;
 	}
-	memcpy(val, buf, sizeof(val));
+	memcpy(val, buf, 2);
 }
 
 static void bcm47xx_fill_sprom_r1234589(struct ssb_sprom *sprom,
@@ -180,7 +180,7 @@ static void bcm47xx_fill_sprom_r1234589(struct ssb_sprom *sprom,
 		      fallback);
 	nvram_read_s8(prefix, NULL, "ag1", &sprom->antenna_gain.a1, 0,
 		      fallback);
-	nvram_read_alpha2(prefix, "ccode", &sprom->alpha2, fallback);
+	nvram_read_alpha2(prefix, "ccode", sprom->alpha2, fallback);
 }
 
 static void bcm47xx_fill_sprom_r12389(struct ssb_sprom *sprom,
@@ -633,20 +633,20 @@ static void bcm47xx_fill_sprom_path_r45(struct ssb_sprom *sprom,
 static void bcm47xx_fill_sprom_ethernet(struct ssb_sprom *sprom,
 					const char *prefix, bool fallback)
 {
-	nvram_read_macaddr(prefix, "et0macaddr", &sprom->et0mac, fallback);
+	nvram_read_macaddr(prefix, "et0macaddr", sprom->et0mac, fallback);
 	nvram_read_u8(prefix, NULL, "et0mdcport", &sprom->et0mdcport, 0,
 		      fallback);
 	nvram_read_u8(prefix, NULL, "et0phyaddr", &sprom->et0phyaddr, 0,
 		      fallback);
 
-	nvram_read_macaddr(prefix, "et1macaddr", &sprom->et1mac, fallback);
+	nvram_read_macaddr(prefix, "et1macaddr", sprom->et1mac, fallback);
 	nvram_read_u8(prefix, NULL, "et1mdcport", &sprom->et1mdcport, 0,
 		      fallback);
 	nvram_read_u8(prefix, NULL, "et1phyaddr", &sprom->et1phyaddr, 0,
 		      fallback);
 
-	nvram_read_macaddr(prefix, "macaddr", &sprom->il0mac, fallback);
-	nvram_read_macaddr(prefix, "il0macaddr", &sprom->il0mac, fallback);
+	nvram_read_macaddr(prefix, "macaddr", sprom->il0mac, fallback);
+	nvram_read_macaddr(prefix, "il0macaddr", sprom->il0mac, fallback);
 }
 
 static void bcm47xx_fill_board_data(struct ssb_sprom *sprom, const char *prefix,

arch/mips/bcm47xx/wgt634u.c

@@ -1,174 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2007 Aurelien Jarno <aurelien@aurel32.net>
- */
-
-#include <linux/platform_device.h>
-#include <linux/module.h>
-#include <linux/leds.h>
-#include <linux/mtd/physmap.h>
-#include <linux/ssb/ssb.h>
-#include <linux/ssb/ssb_embedded.h>
-#include <linux/interrupt.h>
-#include <linux/reboot.h>
-#include <linux/gpio.h>
-#include <asm/mach-bcm47xx/bcm47xx.h>
-
-/* GPIO definitions for the WGT634U */
-#define WGT634U_GPIO_LED	3
-#define WGT634U_GPIO_RESET	2
-#define WGT634U_GPIO_TP1	7
-#define WGT634U_GPIO_TP2	6
-#define WGT634U_GPIO_TP3	5
-#define WGT634U_GPIO_TP4	4
-#define WGT634U_GPIO_TP5	1
-
-static struct gpio_led wgt634u_leds[] = {
-	{
-		.name = "power",
-		.gpio = WGT634U_GPIO_LED,
-		.active_low = 1,
-		.default_trigger = "heartbeat",
-	},
-};
-
-static struct gpio_led_platform_data wgt634u_led_data = {
-	.num_leds =	ARRAY_SIZE(wgt634u_leds),
-	.leds =		wgt634u_leds,
-};
-
-static struct platform_device wgt634u_gpio_leds = {
-	.name =		"leds-gpio",
-	.id =		-1,
-	.dev = {
-		.platform_data = &wgt634u_led_data,
-	}
-};
-
-
-/* 8MiB flash. The struct mtd_partition matches original Netgear WGT634U
-   firmware. */
-static struct mtd_partition wgt634u_partitions[] = {
-	{
-		.name	    = "cfe",
-		.offset	    = 0,
-		.size	    = 0x60000,		/* 384k */
-		.mask_flags = MTD_WRITEABLE	/* force read-only */
-	},
-	{
-		.name	= "config",
-		.offset = 0x60000,
-		.size	= 0x20000		/* 128k */
-	},
-	{
-		.name	= "linux",
-		.offset = 0x80000,
-		.size	= 0x140000		/* 1280k */
-	},
-	{
-		.name	= "jffs",
-		.offset = 0x1c0000,
-		.size	= 0x620000		/* 6272k */
-	},
-	{
-		.name	= "nvram",
-		.offset = 0x7e0000,
-		.size	= 0x20000		/* 128k */
-	},
-};
-
-static struct physmap_flash_data wgt634u_flash_data = {
-	.parts	  = wgt634u_partitions,
-	.nr_parts = ARRAY_SIZE(wgt634u_partitions)
-};
-
-static struct resource wgt634u_flash_resource = {
-	.flags = IORESOURCE_MEM,
-};
-
-static struct platform_device wgt634u_flash = {
-	.name	       = "physmap-flash",
-	.id	       = 0,
-	.dev	       = { .platform_data = &wgt634u_flash_data, },
-	.resource      = &wgt634u_flash_resource,
-	.num_resources = 1,
-};
-
-/* Platform devices */
-static struct platform_device *wgt634u_devices[] __initdata = {
-	&wgt634u_flash,
-	&wgt634u_gpio_leds,
-};
-
-static irqreturn_t gpio_interrupt(int irq, void *ignored)
-{
-	int state;
-
-	/* Interrupts are shared, check if the current one is
-	   a GPIO interrupt. */
-	if (!ssb_chipco_irq_status(&bcm47xx_bus.ssb.chipco,
-				   SSB_CHIPCO_IRQ_GPIO))
-		return IRQ_NONE;
-
-	state = gpio_get_value(WGT634U_GPIO_RESET);
-
-	/* Interrupt are level triggered, revert the interrupt polarity
-	   to clear the interrupt. */
-	ssb_gpio_polarity(&bcm47xx_bus.ssb, 1 << WGT634U_GPIO_RESET,
-			  state ? 1 << WGT634U_GPIO_RESET : 0);
-
-	if (!state) {
-		printk(KERN_INFO "Reset button pressed");
-		ctrl_alt_del();
-	}
-
-	return IRQ_HANDLED;
-}
-
-static int __init wgt634u_init(void)
-{
-	/* There is no easy way to detect that we are running on a WGT634U
-	 * machine. Use the MAC address as an heuristic. Netgear Inc. has
-	 * been allocated ranges 00:09:5b:xx:xx:xx and 00:0f:b5:xx:xx:xx.
-	 */
-	u8 *et0mac;
-
-	if (bcm47xx_bus_type != BCM47XX_BUS_TYPE_SSB)
-		return -ENODEV;
-
-	et0mac = bcm47xx_bus.ssb.sprom.et0mac;
-
-	if (et0mac[0] == 0x00 &&
-	    ((et0mac[1] == 0x09 && et0mac[2] == 0x5b) ||
-	     (et0mac[1] == 0x0f && et0mac[2] == 0xb5))) {
-		struct ssb_mipscore *mcore = &bcm47xx_bus.ssb.mipscore;
-
-		printk(KERN_INFO "WGT634U machine detected.\n");
-
-		if (!request_irq(gpio_to_irq(WGT634U_GPIO_RESET),
-				 gpio_interrupt, IRQF_SHARED,
-				 "WGT634U GPIO", &bcm47xx_bus.ssb.chipco)) {
-			gpio_direction_input(WGT634U_GPIO_RESET);
-			ssb_gpio_intmask(&bcm47xx_bus.ssb,
-					 1 << WGT634U_GPIO_RESET,
-					 1 << WGT634U_GPIO_RESET);
-			ssb_chipco_irq_mask(&bcm47xx_bus.ssb.chipco,
-					    SSB_CHIPCO_IRQ_GPIO,
-					    SSB_CHIPCO_IRQ_GPIO);
-		}
-
-		wgt634u_flash_data.width = mcore->pflash.buswidth;
-		wgt634u_flash_resource.start = mcore->pflash.window;
-		wgt634u_flash_resource.end = mcore->pflash.window
-					   + mcore->pflash.window_size
-					   - 1;
-		return platform_add_devices(wgt634u_devices,
-					    ARRAY_SIZE(wgt634u_devices));
-	} else
-		return -ENODEV;
-}
-
-module_init(wgt634u_init);

arch/mips/bcm63xx/Kconfig

@@ -3,33 +3,41 @@ menu "CPU support"
 
 config BCM63XX_CPU_3368
 	bool "support 3368 CPU"
+	select SYS_HAS_CPU_BMIPS4350
 	select HW_HAS_PCI
 
 config BCM63XX_CPU_6328
 	bool "support 6328 CPU"
+	select SYS_HAS_CPU_BMIPS4350
 	select HW_HAS_PCI
 
 config BCM63XX_CPU_6338
 	bool "support 6338 CPU"
+	select SYS_HAS_CPU_BMIPS32_3300
 	select HW_HAS_PCI
 
 config BCM63XX_CPU_6345
 	bool "support 6345 CPU"
+	select SYS_HAS_CPU_BMIPS32_3300
 
 config BCM63XX_CPU_6348
 	bool "support 6348 CPU"
+	select SYS_HAS_CPU_BMIPS32_3300
 	select HW_HAS_PCI
 
 config BCM63XX_CPU_6358
 	bool "support 6358 CPU"
+	select SYS_HAS_CPU_BMIPS4350
 	select HW_HAS_PCI
 
 config BCM63XX_CPU_6362
 	bool "support 6362 CPU"
+	select SYS_HAS_CPU_BMIPS4350
 	select HW_HAS_PCI
 
 config BCM63XX_CPU_6368
 	bool "support 6368 CPU"
+	select SYS_HAS_CPU_BMIPS4350
 	select HW_HAS_PCI
 endmenu
 

arch/mips/bcm63xx/Makefile

@@ -1,7 +1,7 @@
 obj-y		+= clk.o cpu.o cs.o gpio.o irq.o nvram.o prom.o reset.o \
 		   setup.o timer.o dev-dsp.o dev-enet.o dev-flash.o \
-		   dev-pcmcia.o dev-rng.o dev-spi.o dev-uart.o dev-wdt.o \
-		   dev-usb-usbd.o
+		   dev-pcmcia.o dev-rng.o dev-spi.o dev-hsspi.o dev-uart.o \
+		   dev-wdt.o dev-usb-usbd.o
 obj-$(CONFIG_EARLY_PRINTK)	+= early_printk.o
 
 obj-y		+= boards/

arch/mips/bcm63xx/boards/board_bcm963xx.c

@@ -23,6 +23,7 @@
 #include <bcm63xx_dev_enet.h>
 #include <bcm63xx_dev_dsp.h>
 #include <bcm63xx_dev_flash.h>
+#include <bcm63xx_dev_hsspi.h>
 #include <bcm63xx_dev_pcmcia.h>
 #include <bcm63xx_dev_spi.h>
 #include <bcm63xx_dev_usb_usbd.h>
@@ -915,6 +916,8 @@ int __init board_register_devices(void)
 
 	bcm63xx_spi_register();
 
+	bcm63xx_hsspi_register();
+
 	bcm63xx_flash_register();
 
 	bcm63xx_led_data.num_leds = ARRAY_SIZE(board.leds);

arch/mips/bcm63xx/clk.c

@@ -225,6 +225,28 @@ static struct clk clk_spi = {
 	.set	= spi_set,
 };
 
+/*
+ * HSSPI clock
+ */
+static void hsspi_set(struct clk *clk, int enable)
+{
+	u32 mask;
+
+	if (BCMCPU_IS_6328())
+		mask = CKCTL_6328_HSSPI_EN;
+	else if (BCMCPU_IS_6362())
+		mask = CKCTL_6362_HSSPI_EN;
+	else
+		return;
+
+	bcm_hwclock_set(mask, enable);
+}
+
+static struct clk clk_hsspi = {
+	.set	= hsspi_set,
+};
+
+
 /*
  * XTM clock
  */
@@ -346,6 +368,8 @@ struct clk *clk_get(struct device *dev, const char *id)
 		return &clk_usbd;
 	if (!strcmp(id, "spi"))
 		return &clk_spi;
+	if (!strcmp(id, "hsspi"))
+		return &clk_hsspi;
 	if (!strcmp(id, "xtm"))
 		return &clk_xtm;
 	if (!strcmp(id, "periph"))
@@ -366,3 +390,21 @@ void clk_put(struct clk *clk)
 }
 
 EXPORT_SYMBOL(clk_put);
+
+#define HSSPI_PLL_HZ_6328	133333333
+#define HSSPI_PLL_HZ_6362	400000000
+
+static int __init bcm63xx_clk_init(void)
+{
+	switch (bcm63xx_get_cpu_id()) {
+	case BCM6328_CPU_ID:
+		clk_hsspi.rate = HSSPI_PLL_HZ_6328;
+		break;
+	case BCM6362_CPU_ID:
+		clk_hsspi.rate = HSSPI_PLL_HZ_6362;
+		break;
+	}
+
+	return 0;
+}
+arch_initcall(bcm63xx_clk_init);

arch/mips/bcm63xx/cpu.c

@@ -123,7 +123,9 @@ unsigned int bcm63xx_get_memory_size(void)
 
 static unsigned int detect_cpu_clock(void)
 {
-	switch (bcm63xx_get_cpu_id()) {
+	u16 cpu_id = bcm63xx_get_cpu_id();
+
+	switch (cpu_id) {
 	case BCM3368_CPU_ID:
 		return 300000000;
 
@@ -249,7 +251,7 @@ static unsigned int detect_cpu_clock(void)
 	}
 
 	default:
-		BUG();
+		panic("Failed to detect clock for CPU with id=%04X\n", cpu_id);
 	}
 }
 

arch/mips/bcm63xx/dev-hsspi.c

@@ -0,0 +1,47 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2012 Jonas Gorski <jonas.gorski@gmail.com>
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+
+#include <bcm63xx_cpu.h>
+#include <bcm63xx_dev_hsspi.h>
+#include <bcm63xx_regs.h>
+
+static struct resource spi_resources[] = {
+	{
+		.start		= -1, /* filled at runtime */
+		.end		= -1, /* filled at runtime */
+		.flags		= IORESOURCE_MEM,
+	},
+	{
+		.start		= -1, /* filled at runtime */
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device bcm63xx_hsspi_device = {
+	.name		= "bcm63xx-hsspi",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(spi_resources),
+	.resource	= spi_resources,
+};
+
+int __init bcm63xx_hsspi_register(void)
+{
+	if (!BCMCPU_IS_6328() && !BCMCPU_IS_6362())
+		return -ENODEV;
+
+	spi_resources[0].start = bcm63xx_regset_address(RSET_HSSPI);
+	spi_resources[0].end = spi_resources[0].start;
+	spi_resources[0].end += RSET_HSSPI_SIZE - 1;
+	spi_resources[1].start = bcm63xx_get_irq_number(IRQ_HSSPI);
+
+	return platform_device_register(&bcm63xx_hsspi_device);
+}

arch/mips/bcm63xx/early_printk.c

@@ -6,9 +6,8 @@
  * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
  */
 
-#include <linux/init.h>
 #include <bcm63xx_io.h>
-#include <bcm63xx_regs.h>
+#include <linux/serial_bcm63xx.h>
 
 static void wait_xfered(void)
 {

arch/mips/bcm63xx/prom.c

@@ -59,14 +59,12 @@ void __init prom_init(void)
 	/* do low level board init */
 	board_prom_init();
 
-	if (IS_ENABLED(CONFIG_CPU_BMIPS4350) && IS_ENABLED(CONFIG_SMP)) {
-		/* set up SMP */
-		register_smp_ops(&bmips_smp_ops);
-
+	/* set up SMP */
+	if (!register_bmips_smp_ops()) {
 		/*
-		 * BCM6328 might not have its second CPU enabled, while BCM6358
-		 * needs special handling for its shared TLB, so disable SMP
-		 * for now.
+		 * BCM6328 might not have its second CPU enabled, while BCM3368
+		 * and BCM6358 need special handling for their shared TLB, so
+		 * disable SMP for now.
 		 */
 		if (BCMCPU_IS_6328()) {
 			reg = bcm_readl(BCM_6328_OTP_BASE +
@@ -74,7 +72,7 @@ void __init prom_init(void)
 
 			if (reg & OTP_6328_REG3_TP1_DISABLED)
 				bmips_smp_enabled = 0;
-		} else if (BCMCPU_IS_6358()) {
+		} else if (BCMCPU_IS_3368() || BCMCPU_IS_6358()) {
 			bmips_smp_enabled = 0;
 		}
 

arch/mips/boot/compressed/Makefile

@@ -27,10 +27,10 @@ KBUILD_AFLAGS := $(LINUXINCLUDE) $(KBUILD_AFLAGS) -D__ASSEMBLY__ \
 	-DBOOT_HEAP_SIZE=$(BOOT_HEAP_SIZE) \
 	-DKERNEL_ENTRY=$(VMLINUX_ENTRY_ADDRESS)
 
-targets := head.o decompress.o dbg.o uart-16550.o uart-alchemy.o
+targets := head.o decompress.o string.o dbg.o uart-16550.o uart-alchemy.o
 
 # decompressor objects (linked with vmlinuz)
-vmlinuzobjs-y := $(obj)/head.o $(obj)/decompress.o $(obj)/dbg.o
+vmlinuzobjs-y := $(obj)/head.o $(obj)/decompress.o $(obj)/string.o $(obj)/dbg.o
 
 ifdef CONFIG_DEBUG_ZBOOT
 vmlinuzobjs-$(CONFIG_SYS_SUPPORTS_ZBOOT_UART16550) += $(obj)/uart-16550.o

arch/mips/boot/compressed/dbg.c

@@ -6,7 +6,6 @@
  * need to implement your own putc().
  */
 #include <linux/compiler.h>
-#include <linux/init.h>
 #include <linux/types.h>
 
 void __weak putc(char c)

arch/mips/boot/compressed/decompress.c

@@ -43,33 +43,11 @@ void error(char *x)
 /* activate the code for pre-boot environment */
 #define STATIC static
 
-#if defined(CONFIG_KERNEL_GZIP) || defined(CONFIG_KERNEL_XZ) || \
-	defined(CONFIG_KERNEL_LZ4)
-void *memcpy(void *dest, const void *src, size_t n)
-{
-	int i;
-	const char *s = src;
-	char *d = dest;
-
-	for (i = 0; i < n; i++)
-		d[i] = s[i];
-	return dest;
-}
-#endif
 #ifdef CONFIG_KERNEL_GZIP
 #include "../../../../lib/decompress_inflate.c"
 #endif
 
 #ifdef CONFIG_KERNEL_BZIP2
-void *memset(void *s, int c, size_t n)
-{
-	int i;
-	char *ss = s;
-
-	for (i = 0; i < n; i++)
-		ss[i] = c;
-	return s;
-}
 #include "../../../../lib/decompress_bunzip2.c"
 #endif
 

arch/mips/boot/compressed/string.c

@@ -0,0 +1,28 @@
+/*
+ * arch/mips/boot/compressed/string.c
+ *
+ * Very small subset of simple string routines
+ */
+
+#include <linux/types.h>
+
+void *memcpy(void *dest, const void *src, size_t n)
+{
+	int i;
+	const char *s = src;
+	char *d = dest;
+
+	for (i = 0; i < n; i++)
+		d[i] = s[i];
+	return dest;
+}
+
+void *memset(void *s, int c, size_t n)
+{
+	int i;
+	char *ss = s;
+
+	for (i = 0; i < n; i++)
+		ss[i] = c;
+	return s;
+}

arch/mips/boot/compressed/uart-16550.c

@@ -4,7 +4,6 @@
 
 #include <linux/types.h>
 #include <linux/serial_reg.h>
-#include <linux/init.h>
 
 #include <asm/addrspace.h>
 
@@ -19,8 +18,8 @@
 #endif
 
 #ifdef CONFIG_MACH_JZ4740
-#define UART0_BASE  0xB0030000
-#define PORT(offset) (UART0_BASE + (4 * offset))
+#include <asm/mach-jz4740/base.h>
+#define PORT(offset) (CKSEG1ADDR(JZ4740_UART0_BASE_ADDR) + (4 * offset))
 #endif
 
 #ifdef CONFIG_CPU_XLR

arch/mips/cavium-octeon/executive/cvmx-cmd-queue.c

@@ -47,6 +47,7 @@
  * state. It points to a bootmem named block.
  */
 __cvmx_cmd_queue_all_state_t *__cvmx_cmd_queue_state_ptr;
+EXPORT_SYMBOL_GPL(__cvmx_cmd_queue_state_ptr);
 
 /**
  * Initialize the Global queue state pointer.

arch/mips/cavium-octeon/executive/cvmx-helper-board.c

@@ -722,3 +722,30 @@ int __cvmx_helper_board_hardware_enable(int interface)
 	}
 	return 0;
 }
+
+/**
+ * Get the clock type used for the USB block based on board type.
+ * Used by the USB code for auto configuration of clock type.
+ *
+ * Return USB clock type enumeration
+ */
+enum cvmx_helper_board_usb_clock_types __cvmx_helper_board_usb_get_clock_type(void)
+{
+	switch (cvmx_sysinfo_get()->board_type) {
+	case CVMX_BOARD_TYPE_BBGW_REF:
+	case CVMX_BOARD_TYPE_LANAI2_A:
+	case CVMX_BOARD_TYPE_LANAI2_U:
+	case CVMX_BOARD_TYPE_LANAI2_G:
+	case CVMX_BOARD_TYPE_NIC10E_66:
+	case CVMX_BOARD_TYPE_UBNT_E100:
+		return USB_CLOCK_TYPE_CRYSTAL_12;
+	case CVMX_BOARD_TYPE_NIC10E:
+		return USB_CLOCK_TYPE_REF_12;
+	default:
+		break;
+	}
+	/* Most boards except NIC10e use a 12MHz crystal */
+	if (OCTEON_IS_MODEL(OCTEON_FAM_2))
+		return USB_CLOCK_TYPE_CRYSTAL_12;
+	return USB_CLOCK_TYPE_REF_48;
+}

arch/mips/cavium-octeon/executive/cvmx-helper-util.c

@@ -251,6 +251,7 @@ int cvmx_helper_setup_red(int pass_thresh, int drop_thresh)
 
 	return 0;
 }
+EXPORT_SYMBOL_GPL(cvmx_helper_setup_red);
 
 /**
  * Setup the common GMX settings that determine the number of
@@ -384,6 +385,7 @@ int cvmx_helper_get_ipd_port(int interface, int port)
 	}
 	return -1;
 }
+EXPORT_SYMBOL_GPL(cvmx_helper_get_ipd_port);
 
 /**
  * Returns the interface number for an IPD/PKO port number.
@@ -408,6 +410,7 @@ int cvmx_helper_get_interface_num(int ipd_port)
 
 	return -1;
 }
+EXPORT_SYMBOL_GPL(cvmx_helper_get_interface_num);
 
 /**
  * Returns the interface index number for an IPD/PKO port
@@ -431,3 +434,4 @@ int cvmx_helper_get_interface_index_num(int ipd_port)
 
 	return -1;
 }
+EXPORT_SYMBOL_GPL(cvmx_helper_get_interface_index_num);

arch/mips/cavium-octeon/executive/cvmx-helper.c

@@ -67,7 +67,7 @@ void (*cvmx_override_pko_queue_priority) (int pko_port,
 void (*cvmx_override_ipd_port_setup) (int ipd_port);
 
 /* Port count per interface */
-static int interface_port_count[4] = { 0, 0, 0, 0 };
+static int interface_port_count[5];
 
 /* Port last configured link info index by IPD/PKO port */
 static cvmx_helper_link_info_t
@@ -88,6 +88,7 @@ int cvmx_helper_get_number_of_interfaces(void)
 	else
 		return 3;
 }
+EXPORT_SYMBOL_GPL(cvmx_helper_get_number_of_interfaces);
 
 /**
  * Return the number of ports on an interface. Depending on the
@@ -102,6 +103,7 @@ int cvmx_helper_ports_on_interface(int interface)
 {
 	return interface_port_count[interface];
 }
+EXPORT_SYMBOL_GPL(cvmx_helper_ports_on_interface);
 
 /**
  * Get the operating mode of an interface. Depending on the Octeon
@@ -179,6 +181,7 @@ cvmx_helper_interface_mode_t cvmx_helper_interface_get_mode(int interface)
 			return CVMX_HELPER_INTERFACE_MODE_RGMII;
 	}
 }
+EXPORT_SYMBOL_GPL(cvmx_helper_interface_get_mode);
 
 /**
  * Configure the IPD/PIP tagging and QoS options for a specific
@@ -825,6 +828,7 @@ int cvmx_helper_ipd_and_packet_input_enable(void)
 		__cvmx_helper_errata_fix_ipd_ptr_alignment();
 	return 0;
 }
+EXPORT_SYMBOL_GPL(cvmx_helper_ipd_and_packet_input_enable);
 
 /**
  * Initialize the PIP, IPD, and PKO hardware to support
@@ -903,6 +907,7 @@ int cvmx_helper_initialize_packet_io_global(void)
 #endif
 	return result;
 }
+EXPORT_SYMBOL_GPL(cvmx_helper_initialize_packet_io_global);
 
 /**
  * Does core local initialization for packet io
@@ -947,6 +952,7 @@ cvmx_helper_link_info_t cvmx_helper_link_autoconf(int ipd_port)
 	 */
 	return port_link_info[ipd_port];
 }
+EXPORT_SYMBOL_GPL(cvmx_helper_link_autoconf);
 
 /**
  * Return the link state of an IPD/PKO port as returned by
@@ -1005,6 +1011,7 @@ cvmx_helper_link_info_t cvmx_helper_link_get(int ipd_port)
 	}
 	return result;
 }
+EXPORT_SYMBOL_GPL(cvmx_helper_link_get);
 
 /**
  * Configure an IPD/PKO port for the specified link state. This
@@ -1060,6 +1067,7 @@ int cvmx_helper_link_set(int ipd_port, cvmx_helper_link_info_t link_info)
 		port_link_info[ipd_port].u64 = link_info.u64;
 	return result;
 }
+EXPORT_SYMBOL_GPL(cvmx_helper_link_set);
 
 /**
  * Configure a port for internal and/or external loopback. Internal loopback

arch/mips/cavium-octeon/executive/cvmx-pko.c

@@ -140,7 +140,7 @@ void cvmx_pko_disable(void)
 	pko_reg_flags.s.ena_pko = 0;
 	cvmx_write_csr(CVMX_PKO_REG_FLAGS, pko_reg_flags.u64);
 }
-
+EXPORT_SYMBOL_GPL(cvmx_pko_disable);
 
 /**
  * Reset the packet output.
@@ -182,6 +182,7 @@ void cvmx_pko_shutdown(void)
 	}
 	__cvmx_pko_reset();
 }
+EXPORT_SYMBOL_GPL(cvmx_pko_shutdown);
 
 /**
  * Configure a output port and the associated queues for use.

arch/mips/cavium-octeon/executive/cvmx-spi.c

@@ -177,6 +177,7 @@ int cvmx_spi_restart_interface(int interface, cvmx_spi_mode_t mode, int timeout)
 
 	return res;
 }
+EXPORT_SYMBOL_GPL(cvmx_spi_restart_interface);
 
 /**
  * Callback to perform SPI4 reset

arch/mips/cavium-octeon/octeon-platform.c

@@ -171,6 +171,7 @@ device_initcall(octeon_ohci_device_init);
 static struct of_device_id __initdata octeon_ids[] = {
 	{ .compatible = "simple-bus", },
 	{ .compatible = "cavium,octeon-6335-uctl", },
+	{ .compatible = "cavium,octeon-5750-usbn", },
 	{ .compatible = "cavium,octeon-3860-bootbus", },
 	{ .compatible = "cavium,mdio-mux", },
 	{ .compatible = "gpio-leds", },
@@ -336,14 +337,14 @@ static void __init octeon_fdt_pip_iface(int pip, int idx, u64 *pmac)
 	int p;
 	int count = 0;
 
-	if (cvmx_helper_interface_enumerate(idx) == 0)
-		count = cvmx_helper_ports_on_interface(idx);
-
 	snprintf(name_buffer, sizeof(name_buffer), "interface@%d", idx);
 	iface = fdt_subnode_offset(initial_boot_params, pip, name_buffer);
 	if (iface < 0)
 		return;
 
+	if (cvmx_helper_interface_enumerate(idx) == 0)
+		count = cvmx_helper_ports_on_interface(idx);
+
 	for (p = 0; p < 16; p++)
 		octeon_fdt_pip_port(iface, idx, p, count - 1, pmac);
 }
@@ -682,6 +683,37 @@ end_led:
 		}
 	}
 
+	/* DWC2 USB */
+	alias_prop = fdt_getprop(initial_boot_params, aliases,
+				 "usbn", NULL);
+	if (alias_prop) {
+		int usbn = fdt_path_offset(initial_boot_params, alias_prop);
+
+		if (usbn >= 0 && (current_cpu_type() == CPU_CAVIUM_OCTEON2 ||
+				  !octeon_has_feature(OCTEON_FEATURE_USB))) {
+			pr_debug("Deleting usbn\n");
+			fdt_nop_node(initial_boot_params, usbn);
+			fdt_nop_property(initial_boot_params, aliases, "usbn");
+		} else  {
+			__be32 new_f[1];
+			enum cvmx_helper_board_usb_clock_types c;
+			c = __cvmx_helper_board_usb_get_clock_type();
+			switch (c) {
+			case USB_CLOCK_TYPE_REF_48:
+				new_f[0] = cpu_to_be32(48000000);
+				fdt_setprop_inplace(initial_boot_params, usbn,
+						    "refclk-frequency",  new_f, sizeof(new_f));
+				/* Fall through ...*/
+			case USB_CLOCK_TYPE_REF_12:
+				/* Missing "refclk-type" defaults to external. */
+				fdt_nop_property(initial_boot_params, usbn, "refclk-type");
+				break;
+			default:
+				break;
+			}
+		}
+	}
+
 	return 0;
 }
 

arch/mips/cavium-octeon/octeon_3xxx.dts

@@ -550,6 +550,24 @@
 				big-endian-regs;
 			};
 		};
+
+		usbn: usbn@1180068000000 {
+			compatible = "cavium,octeon-5750-usbn";
+			reg = <0x11800 0x68000000 0x0 0x1000>;
+			ranges; /* Direct mapping */
+			#address-cells = <2>;
+			#size-cells = <2>;
+			/* 12MHz, 24MHz and 48MHz allowed */
+			refclk-frequency = <12000000>;
+			/* Either "crystal" or "external" */
+			refclk-type = "crystal";
+
+			usbc@16f0010000000 {
+				compatible = "cavium,octeon-5750-usbc";
+				reg = <0x16f00 0x10000000 0x0 0x80000>;
+				interrupts = <0 56>;
+			};
+		};
 	};
 
 	aliases {
@@ -566,6 +584,7 @@
 		flash0 = &flash0;
 		cf0 = &cf0;
 		uctl = &uctl;
+		usbn = &usbn;
 		led0 = &led0;
 	};
  };

arch/mips/cavium-octeon/smp.c

@@ -6,7 +6,6 @@
  * Copyright (C) 2004-2008, 2009, 2010 Cavium Networks
  */
 #include <linux/cpu.h>
-#include <linux/init.h>
 #include <linux/delay.h>
 #include <linux/smp.h>
 #include <linux/interrupt.h>

arch/mips/configs/ar7_defconfig

@@ -86,7 +86,6 @@ CONFIG_MAC80211_RC_DEFAULT_PID=y
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_FIRMWARE_IN_KERNEL is not set
 CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_CFI=y

arch/mips/configs/bcm47xx_defconfig

@@ -1,623 +1,86 @@
 CONFIG_BCM47XX=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_KEXEC=y
-# CONFIG_SECCOMP is not set
-CONFIG_EXPERIMENTAL=y
-# CONFIG_LOCALVERSION_AUTO is not set
 CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_BSD_PROCESS_ACCT_V3=y
-CONFIG_TASKSTATS=y
-CONFIG_TASK_DELAY_ACCT=y
-CONFIG_TASK_XACCT=y
-CONFIG_TASK_IO_ACCOUNTING=y
-CONFIG_AUDIT=y
-CONFIG_TINY_RCU=y
-CONFIG_CGROUPS=y
-CONFIG_CGROUP_CPUACCT=y
-CONFIG_RELAY=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_UIDGID_STRICT_TYPE_CHECKS=y
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_RD_LZMA=y
-CONFIG_EXPERT=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_EMBEDDED=y
 CONFIG_SLAB=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-# CONFIG_BLK_DEV_BSG is not set
+CONFIG_PARTITION_ADVANCED=y
 CONFIG_PCI=y
-CONFIG_BINFMT_MISC=m
+# CONFIG_SUSPEND is not set
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
-CONFIG_XFRM_USER=m
-CONFIG_NET_KEY=m
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
 CONFIG_IP_ADVANCED_ROUTER=y
 CONFIG_IP_MULTIPLE_TABLES=y
 CONFIG_IP_ROUTE_MULTIPATH=y
-CONFIG_IP_ROUTE_VERBOSE=y
-CONFIG_NET_IPIP=m
-CONFIG_NET_IPGRE=m
-CONFIG_NET_IPGRE_BROADCAST=y
 CONFIG_IP_MROUTE=y
-CONFIG_IP_PIMSM_V1=y
-CONFIG_IP_PIMSM_V2=y
+CONFIG_IP_MROUTE_MULTIPLE_TABLES=y
 CONFIG_SYN_COOKIES=y
-CONFIG_INET_AH=m
-CONFIG_INET_ESP=m
-CONFIG_INET_IPCOMP=m
-CONFIG_INET_XFRM_MODE_TRANSPORT=m
-CONFIG_INET_XFRM_MODE_TUNNEL=m
-CONFIG_INET_XFRM_MODE_BEET=m
-CONFIG_INET_DIAG=m
 CONFIG_TCP_CONG_ADVANCED=y
-CONFIG_TCP_CONG_BIC=y
-CONFIG_TCP_CONG_CUBIC=m
-CONFIG_TCP_CONG_HSTCP=m
-CONFIG_TCP_CONG_HYBLA=m
-CONFIG_TCP_CONG_SCALABLE=m
-CONFIG_TCP_CONG_LP=m
-CONFIG_TCP_CONG_VENO=m
-CONFIG_TCP_CONG_YEAH=m
-CONFIG_TCP_CONG_ILLINOIS=m
 CONFIG_IPV6_PRIVACY=y
-CONFIG_INET6_AH=m
-CONFIG_INET6_ESP=m
-CONFIG_INET6_IPCOMP=m
-CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
-CONFIG_IPV6_TUNNEL=m
 CONFIG_IPV6_MULTIPLE_TABLES=y
 CONFIG_IPV6_SUBTREES=y
-CONFIG_NETWORK_SECMARK=y
+CONFIG_IPV6_MROUTE=y
 CONFIG_NETFILTER=y
-CONFIG_NETFILTER_NETLINK_QUEUE=m
-CONFIG_NF_CONNTRACK=m
-CONFIG_NF_CONNTRACK_SECMARK=y
-CONFIG_NF_CONNTRACK_EVENTS=y
-CONFIG_NF_CT_PROTO_UDPLITE=m
-CONFIG_NF_CONNTRACK_AMANDA=m
-CONFIG_NF_CONNTRACK_FTP=m
-CONFIG_NF_CONNTRACK_H323=m
-CONFIG_NF_CONNTRACK_IRC=m
-CONFIG_NF_CONNTRACK_NETBIOS_NS=m
-CONFIG_NF_CONNTRACK_PPTP=m
-CONFIG_NF_CONNTRACK_SANE=m
-CONFIG_NF_CONNTRACK_SIP=m
-CONFIG_NF_CONNTRACK_TFTP=m
-CONFIG_NF_CT_NETLINK=m
-CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
-CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
-CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
-CONFIG_NETFILTER_XT_TARGET_DSCP=m
-CONFIG_NETFILTER_XT_TARGET_MARK=m
-CONFIG_NETFILTER_XT_TARGET_NFLOG=m
-CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
-CONFIG_NETFILTER_XT_TARGET_TRACE=m
-CONFIG_NETFILTER_XT_TARGET_SECMARK=m
-CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
-CONFIG_NETFILTER_XT_MATCH_COMMENT=m
-CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
-CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
-CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
-CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
-CONFIG_NETFILTER_XT_MATCH_DSCP=m
-CONFIG_NETFILTER_XT_MATCH_ESP=m
-CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
-CONFIG_NETFILTER_XT_MATCH_HELPER=m
-CONFIG_NETFILTER_XT_MATCH_LENGTH=m
-CONFIG_NETFILTER_XT_MATCH_LIMIT=m
-CONFIG_NETFILTER_XT_MATCH_MAC=m
-CONFIG_NETFILTER_XT_MATCH_MARK=m
-CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
-CONFIG_NETFILTER_XT_MATCH_POLICY=m
-CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
-CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
-CONFIG_NETFILTER_XT_MATCH_QUOTA=m
-CONFIG_NETFILTER_XT_MATCH_REALM=m
-CONFIG_NETFILTER_XT_MATCH_STATE=m
-CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
-CONFIG_NETFILTER_XT_MATCH_STRING=m
-CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
-CONFIG_NETFILTER_XT_MATCH_TIME=m
-CONFIG_NETFILTER_XT_MATCH_U32=m
-CONFIG_IP_VS=m
-CONFIG_IP_VS_PROTO_TCP=y
-CONFIG_IP_VS_PROTO_UDP=y
-CONFIG_IP_VS_PROTO_ESP=y
-CONFIG_IP_VS_PROTO_AH=y
-CONFIG_IP_VS_RR=m
-CONFIG_IP_VS_WRR=m
-CONFIG_IP_VS_LC=m
-CONFIG_IP_VS_WLC=m
-CONFIG_IP_VS_LBLC=m
-CONFIG_IP_VS_LBLCR=m
-CONFIG_IP_VS_DH=m
-CONFIG_IP_VS_SH=m
-CONFIG_IP_VS_SED=m
-CONFIG_IP_VS_NQ=m
-CONFIG_IP_VS_FTP=m
-CONFIG_NF_CONNTRACK_IPV4=m
-CONFIG_IP_NF_QUEUE=m
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_AH=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_NF_NAT=m
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_CLUSTERIP=m
-CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_TTL=m
-CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-CONFIG_IP_NF_ARP_MANGLE=m
-CONFIG_NF_CONNTRACK_IPV6=m
-CONFIG_IP6_NF_QUEUE=m
-CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_AH=m
-CONFIG_IP6_NF_MATCH_EUI64=m
-CONFIG_IP6_NF_MATCH_FRAG=m
-CONFIG_IP6_NF_MATCH_OPTS=m
-CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_MH=m
-CONFIG_IP6_NF_MATCH_RT=m
-CONFIG_IP6_NF_TARGET_HL=m
-CONFIG_IP6_NF_TARGET_LOG=m
-CONFIG_IP6_NF_FILTER=m
-CONFIG_IP6_NF_TARGET_REJECT=m
-CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_RAW=m
-CONFIG_BRIDGE_NF_EBTABLES=m
-CONFIG_BRIDGE_EBT_BROUTE=m
-CONFIG_BRIDGE_EBT_T_FILTER=m
-CONFIG_BRIDGE_EBT_T_NAT=m
-CONFIG_BRIDGE_EBT_802_3=m
-CONFIG_BRIDGE_EBT_AMONG=m
-CONFIG_BRIDGE_EBT_ARP=m
-CONFIG_BRIDGE_EBT_IP=m
-CONFIG_BRIDGE_EBT_LIMIT=m
-CONFIG_BRIDGE_EBT_MARK=m
-CONFIG_BRIDGE_EBT_PKTTYPE=m
-CONFIG_BRIDGE_EBT_STP=m
-CONFIG_BRIDGE_EBT_VLAN=m
-CONFIG_BRIDGE_EBT_ARPREPLY=m
-CONFIG_BRIDGE_EBT_DNAT=m
-CONFIG_BRIDGE_EBT_MARK_T=m
-CONFIG_BRIDGE_EBT_REDIRECT=m
-CONFIG_BRIDGE_EBT_SNAT=m
-CONFIG_BRIDGE_EBT_LOG=m
-CONFIG_BRIDGE_EBT_ULOG=m
-CONFIG_IP_DCCP=m
-CONFIG_TIPC=m
-CONFIG_TIPC_ADVANCED=y
-CONFIG_ATM=m
-CONFIG_ATM_CLIP=m
-CONFIG_ATM_LANE=m
-CONFIG_ATM_MPOA=m
-CONFIG_ATM_BR2684=m
-CONFIG_BRIDGE=m
-CONFIG_VLAN_8021Q=m
+CONFIG_VLAN_8021Q=y
 CONFIG_NET_SCHED=y
-CONFIG_NET_SCH_CBQ=m
-CONFIG_NET_SCH_HTB=m
-CONFIG_NET_SCH_HFSC=m
-CONFIG_NET_SCH_ATM=m
-CONFIG_NET_SCH_PRIO=m
-CONFIG_NET_SCH_RED=m
-CONFIG_NET_SCH_SFQ=m
-CONFIG_NET_SCH_TEQL=m
-CONFIG_NET_SCH_TBF=m
-CONFIG_NET_SCH_GRED=m
-CONFIG_NET_SCH_DSMARK=m
-CONFIG_NET_SCH_NETEM=m
-CONFIG_NET_SCH_INGRESS=m
-CONFIG_NET_CLS_BASIC=m
-CONFIG_NET_CLS_TCINDEX=m
-CONFIG_NET_CLS_ROUTE4=m
-CONFIG_NET_CLS_FW=m
-CONFIG_NET_CLS_U32=m
-CONFIG_CLS_U32_PERF=y
-CONFIG_CLS_U32_MARK=y
-CONFIG_NET_CLS_RSVP=m
-CONFIG_NET_CLS_RSVP6=m
-CONFIG_NET_EMATCH=y
-CONFIG_NET_EMATCH_CMP=m
-CONFIG_NET_EMATCH_NBYTE=m
-CONFIG_NET_EMATCH_U32=m
-CONFIG_NET_EMATCH_META=m
-CONFIG_NET_EMATCH_TEXT=m
-CONFIG_NET_CLS_ACT=y
-CONFIG_NET_ACT_POLICE=m
-CONFIG_NET_ACT_GACT=m
-CONFIG_GACT_PROB=y
-CONFIG_NET_ACT_MIRRED=m
-CONFIG_NET_ACT_IPT=m
-CONFIG_NET_ACT_NAT=m
-CONFIG_NET_ACT_PEDIT=m
-CONFIG_NET_ACT_SIMP=m
-CONFIG_NET_CLS_IND=y
-CONFIG_NET_PKTGEN=m
-CONFIG_BT=m
-CONFIG_BT_HCIUART=m
-CONFIG_BT_HCIUART_H4=y
-CONFIG_BT_HCIUART_BCSP=y
-CONFIG_BT_HCIUART_LL=y
-CONFIG_BT_HCIBCM203X=m
-CONFIG_BT_HCIBPA10X=m
-CONFIG_BT_HCIBFUSB=m
-CONFIG_BT_HCIVHCI=m
-CONFIG_CFG80211=m
-CONFIG_MAC80211=m
-CONFIG_MAC80211_RC_PID=y
-CONFIG_MAC80211_RC_DEFAULT_PID=y
-CONFIG_MAC80211_MESH=y
-CONFIG_RFKILL=m
-CONFIG_RFKILL_INPUT=y
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_FW_LOADER=m
-CONFIG_CONNECTOR=m
+CONFIG_NET_SCH_FQ_CODEL=y
+CONFIG_HAMRADIO=y
+CONFIG_CFG80211=y
+CONFIG_MAC80211=y
 CONFIG_MTD=y
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CHAR=y
+CONFIG_MTD_BCM47XX_PARTS=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_CFI=y
 CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_CFI_STAA=y
-CONFIG_MTD_RAM=y
-CONFIG_MTD_ROM=y
-CONFIG_MTD_ABSENT=y
+CONFIG_MTD_COMPLEX_MAPPINGS=y
 CONFIG_MTD_PHYSMAP=y
-CONFIG_BLK_DEV_LOOP=m
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_BLK_DEV_NBD=m
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=16384
-CONFIG_ATA_OVER_ETH=m
-CONFIG_RAID_ATTRS=m
-CONFIG_SCSI=y
-CONFIG_SCSI_TGT=m
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=m
-CONFIG_CHR_DEV_OSST=m
-CONFIG_BLK_DEV_SR=m
-CONFIG_BLK_DEV_SR_VENDOR=y
-CONFIG_CHR_DEV_SG=m
-CONFIG_CHR_DEV_SCH=m
-CONFIG_SCSI_MULTI_LUN=y
-CONFIG_SCSI_CONSTANTS=y
-CONFIG_SCSI_LOGGING=y
-CONFIG_SCSI_SCAN_ASYNC=y
-CONFIG_ISCSI_TCP=m
+CONFIG_MTD_BCM47XXSFLASH=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_BCM47XXNFLASH=y
 CONFIG_NETDEVICES=y
-CONFIG_DUMMY=m
-CONFIG_EQUALIZER=m
-CONFIG_TUN=m
-CONFIG_VETH=m
-CONFIG_PHYLIB=m
-CONFIG_MARVELL_PHY=m
-CONFIG_DAVICOM_PHY=m
-CONFIG_QSEMI_PHY=m
-CONFIG_LXT_PHY=m
-CONFIG_CICADA_PHY=m
-CONFIG_VITESSE_PHY=m
-CONFIG_SMSC_PHY=m
-CONFIG_BROADCOM_PHY=m
-CONFIG_ICPLUS_PHY=m
-CONFIG_MDIO_BITBANG=m
-CONFIG_NET_ETHERNET=y
-CONFIG_NET_PCI=y
 CONFIG_B44=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-CONFIG_ATH_COMMON=m
-CONFIG_ATH5K=m
-CONFIG_B43=m
-CONFIG_B43LEGACY=m
-CONFIG_ZD1211RW=m
-CONFIG_USB_CATC=m
-CONFIG_USB_KAWETH=m
-CONFIG_USB_PEGASUS=m
-CONFIG_USB_RTL8150=m
-CONFIG_USB_USBNET=m
-CONFIG_USB_NET_DM9601=m
-CONFIG_USB_NET_GL620A=m
-CONFIG_USB_NET_PLUSB=m
-CONFIG_USB_NET_MCS7830=m
-CONFIG_USB_NET_RNDIS_HOST=m
-CONFIG_USB_ALI_M5632=y
-CONFIG_USB_AN2720=y
-CONFIG_USB_EPSON2888=y
-CONFIG_USB_KC2190=y
-CONFIG_USB_SIERRA_NET=m
-CONFIG_ATM_DUMMY=m
-CONFIG_ATM_TCP=m
-CONFIG_PPP=m
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPP_MPPE=m
-CONFIG_PPPOE=m
-CONFIG_PPPOATM=m
-CONFIG_SLIP=m
-CONFIG_INPUT_EVDEV=m
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT is not set
+CONFIG_TIGON3=y
+CONFIG_BGMAC=y
+CONFIG_ATH_CARDS=y
+CONFIG_ATH5K=y
+CONFIG_B43=y
+CONFIG_B43LEGACY=y
+CONFIG_BRCMSMAC=y
+CONFIG_ISDN=y
 CONFIG_SERIAL_8250=y
+# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set
 CONFIG_SERIAL_8250_CONSOLE=y
 # CONFIG_SERIAL_8250_PCI is not set
 CONFIG_SERIAL_8250_NR_UARTS=2
 CONFIG_SERIAL_8250_RUNTIME_UARTS=2
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_HW_RANDOM is not set
-CONFIG_W1=m
-CONFIG_W1_MASTER_MATROX=m
-CONFIG_W1_MASTER_DS2490=m
-CONFIG_W1_SLAVE_THERM=m
-CONFIG_W1_SLAVE_SMEM=m
-CONFIG_W1_SLAVE_DS2433=m
-CONFIG_W1_SLAVE_DS2760=m
-# CONFIG_HWMON is not set
-CONFIG_THERMAL=y
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_HW_RANDOM=y
+CONFIG_GPIO_SYSFS=y
 CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
 CONFIG_BCM47XX_WDT=y
+CONFIG_SSB_DEBUG=y
 CONFIG_SSB_DRIVER_GIGE=y
-CONFIG_DISPLAY_SUPPORT=m
-CONFIG_SOUND=m
-CONFIG_SND=m
-CONFIG_SND_SEQUENCER=m
-CONFIG_SND_SEQ_DUMMY=m
-CONFIG_SND_MIXER_OSS=m
-CONFIG_SND_PCM_OSS=m
-CONFIG_SND_SEQUENCER_OSS=y
-CONFIG_SND_DUMMY=m
-CONFIG_SND_VIRMIDI=m
-CONFIG_SND_USB_AUDIO=m
-CONFIG_HID=m
-CONFIG_USB_HID=m
-CONFIG_USB_HIDDEV=y
+CONFIG_BCMA_DRIVER_GMAC_CMN=y
 CONFIG_USB=y
-CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_DEVICE_CLASS is not set
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_ROOT_HUB_TT=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_U132_HCD=m
-CONFIG_USB_R8A66597_HCD=m
-CONFIG_USB_ACM=m
-CONFIG_USB_PRINTER=m
-CONFIG_USB_STORAGE=y
-CONFIG_USB_STORAGE_DATAFAB=y
-CONFIG_USB_STORAGE_FREECOM=y
-CONFIG_USB_STORAGE_USBAT=y
-CONFIG_USB_STORAGE_SDDR09=y
-CONFIG_USB_STORAGE_SDDR55=y
-CONFIG_USB_STORAGE_JUMPSHOT=y
-CONFIG_USB_STORAGE_ALAUDA=y
-CONFIG_USB_STORAGE_ONETOUCH=y
-CONFIG_USB_STORAGE_KARMA=y
-CONFIG_USB_MDC800=m
-CONFIG_USB_MICROTEK=m
-CONFIG_USB_SERIAL=m
-CONFIG_USB_SERIAL_GENERIC=y
-CONFIG_USB_SERIAL_AIRCABLE=m
-CONFIG_USB_SERIAL_ARK3116=m
-CONFIG_USB_SERIAL_BELKIN=m
-CONFIG_USB_SERIAL_CH341=m
-CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
-CONFIG_USB_SERIAL_CYPRESS_M8=m
-CONFIG_USB_SERIAL_EMPEG=m
-CONFIG_USB_SERIAL_FTDI_SIO=m
-CONFIG_USB_SERIAL_FUNSOFT=m
-CONFIG_USB_SERIAL_VISOR=m
-CONFIG_USB_SERIAL_IPAQ=m
-CONFIG_USB_SERIAL_IR=m
-CONFIG_USB_SERIAL_GARMIN=m
-CONFIG_USB_SERIAL_IPW=m
-CONFIG_USB_SERIAL_KEYSPAN_PDA=m
-CONFIG_USB_SERIAL_KLSI=m
-CONFIG_USB_SERIAL_KOBIL_SCT=m
-CONFIG_USB_SERIAL_MCT_U232=m
-CONFIG_USB_SERIAL_MOS7720=m
-CONFIG_USB_SERIAL_MOS7840=m
-CONFIG_USB_SERIAL_NAVMAN=m
-CONFIG_USB_SERIAL_PL2303=m
-CONFIG_USB_SERIAL_OTI6858=m
-CONFIG_USB_SERIAL_HP4X=m
-CONFIG_USB_SERIAL_SAFE=m
-CONFIG_USB_SERIAL_SIERRAWIRELESS=m
-CONFIG_USB_SERIAL_CYBERJACK=m
-CONFIG_USB_SERIAL_XIRCOM=m
-CONFIG_USB_SERIAL_OPTION=m
-CONFIG_USB_SERIAL_OMNINET=m
-CONFIG_USB_SERIAL_DEBUG=m
-CONFIG_USB_ADUTUX=m
-CONFIG_USB_RIO500=m
-CONFIG_USB_LEGOTOWER=m
-CONFIG_USB_LCD=m
-CONFIG_USB_LED=m
-CONFIG_USB_CYPRESS_CY7C63=m
-CONFIG_USB_CYTHERM=m
-CONFIG_USB_IDMOUSE=m
-CONFIG_USB_FTDI_ELAN=m
-CONFIG_USB_SISUSBVGA=m
-CONFIG_USB_LD=m
-CONFIG_USB_TRANCEVIBRATOR=m
-CONFIG_USB_IOWARRIOR=m
-CONFIG_USB_TEST=m
-CONFIG_USB_ATM=m
-CONFIG_USB_SPEEDTOUCH=m
-CONFIG_USB_CXACRU=m
-CONFIG_USB_UEAGLEATM=m
-CONFIG_USB_XUSBATM=m
-CONFIG_USB_GADGET=m
-CONFIG_USB_GADGET_NET2280=y
-CONFIG_USB_ZERO=m
-CONFIG_USB_ETH=m
-CONFIG_USB_GADGETFS=m
-CONFIG_USB_MASS_STORAGE=m
-CONFIG_USB_G_SERIAL=m
-CONFIG_USB_MIDI_GADGET=m
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_GPIO=y
+CONFIG_USB_HCD_BCMA=y
+CONFIG_USB_HCD_SSB=y
 CONFIG_LEDS_TRIGGER_TIMER=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
 CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-CONFIG_EXT2_FS_SECURITY=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT3_FS_SECURITY=y
-CONFIG_REISERFS_FS=m
-CONFIG_REISERFS_FS_XATTR=y
-CONFIG_REISERFS_FS_POSIX_ACL=y
-CONFIG_REISERFS_FS_SECURITY=y
-CONFIG_JFS_FS=m
-CONFIG_JFS_POSIX_ACL=y
-CONFIG_JFS_SECURITY=y
-CONFIG_XFS_FS=m
-CONFIG_XFS_QUOTA=y
-CONFIG_XFS_POSIX_ACL=y
-CONFIG_XFS_RT=y
-CONFIG_GFS2_FS=m
-CONFIG_QUOTA=y
-CONFIG_QUOTA_NETLINK_INTERFACE=y
-CONFIG_QFMT_V1=m
-CONFIG_QFMT_V2=m
-CONFIG_AUTOFS_FS=m
-CONFIG_AUTOFS4_FS=m
-CONFIG_FUSE_FS=m
-CONFIG_ISO9660_FS=m
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
-CONFIG_UDF_FS=m
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_NTFS_FS=m
-CONFIG_NTFS_RW=y
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
-CONFIG_ADFS_FS=m
-CONFIG_AFFS_FS=m
-CONFIG_HFS_FS=m
-CONFIG_HFSPLUS_FS=m
-CONFIG_BEFS_FS=m
-CONFIG_BFS_FS=m
-CONFIG_EFS_FS=m
-CONFIG_JFFS2_FS=m
-CONFIG_JFFS2_FS_XATTR=y
-CONFIG_CRAMFS=m
-CONFIG_VXFS_FS=m
-CONFIG_MINIX_FS=m
-CONFIG_HPFS_FS=m
-CONFIG_QNX4FS_FS=m
-CONFIG_ROMFS_FS=m
-CONFIG_SYSV_FS=m
-CONFIG_UFS_FS=m
-CONFIG_NFS_FS=m
-CONFIG_NFS_V3=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_NFS_V4=y
-CONFIG_NFSD=m
-CONFIG_NFSD_V3_ACL=y
-CONFIG_NFSD_V4=y
-CONFIG_RPCSEC_GSS_SPKM3=m
-CONFIG_CIFS=m
-CONFIG_CIFS_XATTR=y
-CONFIG_CIFS_POSIX=y
-CONFIG_NCP_FS=m
-CONFIG_NCPFS_NFS_NS=y
-CONFIG_NCPFS_OS2_NS=y
-CONFIG_NCPFS_NLS=y
-CONFIG_NCPFS_EXTRAS=y
-CONFIG_CODA_FS=m
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_KARMA_PARTITION=y
-CONFIG_NLS_CODEPAGE_437=m
-CONFIG_NLS_CODEPAGE_737=m
-CONFIG_NLS_CODEPAGE_775=m
-CONFIG_NLS_CODEPAGE_850=m
-CONFIG_NLS_CODEPAGE_852=m
-CONFIG_NLS_CODEPAGE_855=m
-CONFIG_NLS_CODEPAGE_857=m
-CONFIG_NLS_CODEPAGE_860=m
-CONFIG_NLS_CODEPAGE_861=m
-CONFIG_NLS_CODEPAGE_862=m
-CONFIG_NLS_CODEPAGE_863=m
-CONFIG_NLS_CODEPAGE_864=m
-CONFIG_NLS_CODEPAGE_865=m
-CONFIG_NLS_CODEPAGE_866=m
-CONFIG_NLS_CODEPAGE_869=m
-CONFIG_NLS_CODEPAGE_936=m
-CONFIG_NLS_CODEPAGE_950=m
-CONFIG_NLS_CODEPAGE_932=m
-CONFIG_NLS_CODEPAGE_949=m
-CONFIG_NLS_CODEPAGE_874=m
-CONFIG_NLS_ISO8859_8=m
-CONFIG_NLS_CODEPAGE_1250=m
-CONFIG_NLS_CODEPAGE_1251=m
-CONFIG_NLS_ASCII=m
-CONFIG_NLS_ISO8859_1=m
-CONFIG_NLS_ISO8859_2=m
-CONFIG_NLS_ISO8859_3=m
-CONFIG_NLS_ISO8859_4=m
-CONFIG_NLS_ISO8859_5=m
-CONFIG_NLS_ISO8859_6=m
-CONFIG_NLS_ISO8859_7=m
-CONFIG_NLS_ISO8859_9=m
-CONFIG_NLS_ISO8859_13=m
-CONFIG_NLS_ISO8859_14=m
-CONFIG_NLS_ISO8859_15=m
-CONFIG_NLS_KOI8_R=m
-CONFIG_NLS_KOI8_U=m
-CONFIG_DLM=m
-CONFIG_DLM_DEBUG=y
+CONFIG_PRINTK_TIME=y
+CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_INFO_REDUCED=y
+CONFIG_STRIP_ASM_SYMS=y
 CONFIG_DEBUG_FS=y
-CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_TEST=m
-CONFIG_CRYPTO_LRW=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_XTS=m
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_XCBC=m
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_WP512=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_CAMELLIA=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_FCRYPT=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_SEED=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRC16=m
-CONFIG_CRC7=m
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE="console=ttyS0,115200"
+CONFIG_CRC32_SARWATE=y

arch/mips/configs/bcm63xx_defconfig

@@ -44,7 +44,6 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_STANDALONE is not set
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_CFI=y
 CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_CFI_AMDSTD=y

arch/mips/configs/cobalt_defconfig

@@ -19,7 +19,6 @@ CONFIG_INET=y
 # CONFIG_IPV6 is not set
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_JEDECPROBE=y

arch/mips/configs/gpr_defconfig

@@ -165,7 +165,6 @@ CONFIG_YAM=m
 CONFIG_CFG80211=y
 CONFIG_MAC80211=y
 CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_CFI=y

arch/mips/configs/jmr3927_defconfig

@@ -22,7 +22,6 @@ CONFIG_IP_PNP_BOOTP=y
 # CONFIG_INET_DIAG is not set
 # CONFIG_IPV6 is not set
 CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_CFI=y

arch/mips/configs/lasat_defconfig

@@ -31,7 +31,6 @@ CONFIG_INET=y
 # CONFIG_INET_DIAG is not set
 # CONFIG_IPV6 is not set
 CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_CFI=y

arch/mips/configs/maltasmvp_defconfig

@@ -4,7 +4,7 @@ CONFIG_CPU_MIPS32_R2=y
 CONFIG_MIPS_MT_SMP=y
 CONFIG_SCHED_SMT=y
 CONFIG_MIPS_CMP=y
-CONFIG_NR_CPUS=8
+CONFIG_NR_CPUS=2
 CONFIG_HZ_100=y
 CONFIG_LOCALVERSION="cmp"
 CONFIG_SYSVIPC=y
@@ -58,7 +58,6 @@ CONFIG_ATALK=m
 CONFIG_DEV_APPLETALK=m
 CONFIG_IPDDP=m
 CONFIG_IPDDP_ENCAP=y
-CONFIG_IPDDP_DECAP=y
 CONFIG_NET_SCHED=y
 CONFIG_NET_SCH_CBQ=m
 CONFIG_NET_SCH_HTB=m

arch/mips/configs/markeins_defconfig

@@ -124,7 +124,6 @@ CONFIG_IP6_NF_MANGLE=m
 CONFIG_IP6_NF_RAW=m
 CONFIG_FW_LOADER=m
 CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y

arch/mips/configs/mtx1_defconfig

@@ -246,7 +246,6 @@ CONFIG_BT_HCIBTUART=m
 CONFIG_BT_HCIVHCI=m
 CONFIG_CONNECTOR=m
 CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_CFI=y

arch/mips/configs/pnx8335_stb225_defconfig

@@ -31,7 +31,6 @@ CONFIG_INET_AH=y
 # CONFIG_IPV6 is not set
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y

arch/mips/configs/qi_lb60_defconfig

@@ -0,0 +1,188 @@
+CONFIG_MACH_JZ4740=y
+# CONFIG_COMPACTION is not set
+# CONFIG_CROSS_MEMORY_ATTACH is not set
+CONFIG_HZ_100=y
+CONFIG_PREEMPT=y
+# CONFIG_SECCOMP is not set
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SYSVIPC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS_ALL=y
+CONFIG_EMBEDDED=y
+# CONFIG_VM_EVENT_COUNTERS is not set
+# CONFIG_COMPAT_BRK is not set
+CONFIG_SLAB=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_BLK_DEV_BSG is not set
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_IP_MROUTE=y
+CONFIG_IP_MROUTE_MULTIPLE_TABLES=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+CONFIG_TCP_CONG_ADVANCED=y
+# CONFIG_TCP_CONG_BIC is not set
+# CONFIG_TCP_CONG_CUBIC is not set
+CONFIG_TCP_CONG_WESTWOOD=y
+# CONFIG_TCP_CONG_HTCP is not set
+# CONFIG_IPV6 is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_MTD=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_JZ4740=y
+CONFIG_MTD_UBI=y
+CONFIG_NETDEVICES=y
+# CONFIG_WLAN is not set
+# CONFIG_INPUT_MOUSEDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_KEYBOARD_ATKBD is not set
+CONFIG_KEYBOARD_GPIO=y
+CONFIG_KEYBOARD_MATRIX=y
+# CONFIG_INPUT_MOUSE is not set
+CONFIG_INPUT_MISC=y
+# CONFIG_SERIO is not set
+CONFIG_LEGACY_PTY_COUNT=2
+# CONFIG_DEVKMEM is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+# CONFIG_SERIAL_8250_DMA is not set
+CONFIG_SERIAL_8250_NR_UARTS=2
+CONFIG_SERIAL_8250_RUNTIME_UARTS=2
+# CONFIG_HW_RANDOM is not set
+CONFIG_SPI=y
+CONFIG_SPI_GPIO=y
+CONFIG_POWER_SUPPLY=y
+CONFIG_BATTERY_JZ4740=y
+CONFIG_CHARGER_GPIO=y
+# CONFIG_HWMON is not set
+CONFIG_MFD_JZ4740_ADC=y
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
+CONFIG_FB=y
+CONFIG_FB_JZ4740=y
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=y
+# CONFIG_BACKLIGHT_CLASS_DEVICE is not set
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+# CONFIG_LOGO_LINUX_CLUT224 is not set
+CONFIG_SOUND=y
+CONFIG_SND=y
+# CONFIG_SND_SUPPORT_OLD_API is not set
+# CONFIG_SND_VERBOSE_PROCFS is not set
+# CONFIG_SND_DRIVERS is not set
+# CONFIG_SND_SPI is not set
+# CONFIG_SND_MIPS is not set
+CONFIG_SND_SOC=y
+CONFIG_SND_JZ4740_SOC=y
+CONFIG_SND_JZ4740_SOC_QI_LB60=y
+CONFIG_USB=y
+CONFIG_USB_OTG_BLACKLIST_HUB=y
+CONFIG_USB_MUSB_HDRC=y
+CONFIG_USB_MUSB_GADGET=y
+CONFIG_USB_MUSB_JZ4740=y
+CONFIG_NOP_USB_XCEIV=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_DEBUG=y
+CONFIG_USB_ETH=y
+# CONFIG_USB_ETH_RNDIS is not set
+CONFIG_MMC=y
+CONFIG_MMC_UNSAFE_RESUME=y
+# CONFIG_MMC_BLOCK_BOUNCE is not set
+CONFIG_MMC_JZ4740=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_JZ4740=y
+CONFIG_DMADEVICES=y
+CONFIG_DMA_JZ4740=y
+CONFIG_PWM=y
+CONFIG_PWM_JZ4740=y
+CONFIG_EXT2_FS=y
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_DNOTIFY is not set
+CONFIG_VFAT_FS=y
+CONFIG_PROC_KCORE=y
+# CONFIG_PROC_PAGE_MONITOR is not set
+CONFIG_TMPFS=y
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_SUMMARY=y
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+# CONFIG_JFFS2_ZLIB is not set
+CONFIG_UBIFS_FS=y
+CONFIG_UBIFS_FS_ADVANCED_COMPR=y
+# CONFIG_NETWORK_FILESYSTEMS is not set
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_737=y
+CONFIG_NLS_CODEPAGE_775=y
+CONFIG_NLS_CODEPAGE_850=y
+CONFIG_NLS_CODEPAGE_852=y
+CONFIG_NLS_CODEPAGE_855=y
+CONFIG_NLS_CODEPAGE_857=y
+CONFIG_NLS_CODEPAGE_860=y
+CONFIG_NLS_CODEPAGE_861=y
+CONFIG_NLS_CODEPAGE_862=y
+CONFIG_NLS_CODEPAGE_863=y
+CONFIG_NLS_CODEPAGE_864=y
+CONFIG_NLS_CODEPAGE_865=y
+CONFIG_NLS_CODEPAGE_866=y
+CONFIG_NLS_CODEPAGE_869=y
+CONFIG_NLS_CODEPAGE_936=y
+CONFIG_NLS_CODEPAGE_950=y
+CONFIG_NLS_CODEPAGE_932=y
+CONFIG_NLS_CODEPAGE_949=y
+CONFIG_NLS_CODEPAGE_874=y
+CONFIG_NLS_ISO8859_8=y
+CONFIG_NLS_CODEPAGE_1250=y
+CONFIG_NLS_CODEPAGE_1251=y
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_2=y
+CONFIG_NLS_ISO8859_3=y
+CONFIG_NLS_ISO8859_4=y
+CONFIG_NLS_ISO8859_5=y
+CONFIG_NLS_ISO8859_6=y
+CONFIG_NLS_ISO8859_7=y
+CONFIG_NLS_ISO8859_9=y
+CONFIG_NLS_ISO8859_13=y
+CONFIG_NLS_ISO8859_14=y
+CONFIG_NLS_ISO8859_15=y
+CONFIG_NLS_KOI8_R=y
+CONFIG_NLS_KOI8_U=y
+CONFIG_NLS_UTF8=y
+CONFIG_PRINTK_TIME=y
+CONFIG_DEBUG_INFO=y
+CONFIG_STRIP_ASM_SYMS=y
+CONFIG_READABLE_ASM=y
+CONFIG_DEBUG_KMEMLEAK=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_DEBUG_STACKOVERFLOW=y
+CONFIG_PANIC_ON_OOPS=y
+# CONFIG_FTRACE is not set
+CONFIG_KGDB=y
+CONFIG_RUNTIME_DEBUG=y
+CONFIG_CRYPTO_ZLIB=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_FONTS=y
+CONFIG_FONT_SUN8x16=y

arch/mips/configs/rb532_defconfig

@@ -114,7 +114,6 @@ CONFIG_NET_CLS_IND=y
 CONFIG_HAMRADIO=y
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_BLOCK2MTD=y

arch/mips/configs/rbtx49xx_defconfig

@@ -35,7 +35,6 @@ CONFIG_IP_PNP=y
 # CONFIG_IPV6 is not set
 # CONFIG_WIRELESS is not set
 CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=m

arch/mips/fw/arc/file.c

@@ -8,7 +8,6 @@
  * Copyright (C) 1994, 1995, 1996, 1999 Ralf Baechle
  * Copyright (C) 1999 Silicon Graphics, Inc.
  */
-#include <linux/init.h>
 
 #include <asm/fw/arc/types.h>
 #include <asm/sgialib.h>

arch/mips/include/asm/amon.h

@@ -1,7 +1,12 @@
 /*
- * Amon support
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2013 Imagination Technologies Ltd.
+ *
+ * Arbitrary Monitor Support (AMON)
  */
-
-int amon_cpu_avail(int);
-void amon_cpu_start(int, unsigned long, unsigned long,
-		    unsigned long, unsigned long);
+int amon_cpu_avail(int cpu);
+int amon_cpu_start(int cpu, unsigned long pc, unsigned long sp,
+		   unsigned long gp, unsigned long a0);

arch/mips/include/asm/asmmacro-32.h

@@ -12,27 +12,6 @@
 #include <asm/fpregdef.h>
 #include <asm/mipsregs.h>
 
-	.macro	fpu_save_double thread status tmp1=t0
-	cfc1	\tmp1,  fcr31
-	sdc1	$f0,  THREAD_FPR0(\thread)
-	sdc1	$f2,  THREAD_FPR2(\thread)
-	sdc1	$f4,  THREAD_FPR4(\thread)
-	sdc1	$f6,  THREAD_FPR6(\thread)
-	sdc1	$f8,  THREAD_FPR8(\thread)
-	sdc1	$f10, THREAD_FPR10(\thread)
-	sdc1	$f12, THREAD_FPR12(\thread)
-	sdc1	$f14, THREAD_FPR14(\thread)
-	sdc1	$f16, THREAD_FPR16(\thread)
-	sdc1	$f18, THREAD_FPR18(\thread)
-	sdc1	$f20, THREAD_FPR20(\thread)
-	sdc1	$f22, THREAD_FPR22(\thread)
-	sdc1	$f24, THREAD_FPR24(\thread)
-	sdc1	$f26, THREAD_FPR26(\thread)
-	sdc1	$f28, THREAD_FPR28(\thread)
-	sdc1	$f30, THREAD_FPR30(\thread)
-	sw	\tmp1, THREAD_FCR31(\thread)
-	.endm
-
 	.macro	fpu_save_single thread tmp=t0
 	cfc1	\tmp,  fcr31
 	swc1	$f0,  THREAD_FPR0(\thread)
@@ -70,27 +49,6 @@
 	sw	\tmp, THREAD_FCR31(\thread)
 	.endm
 
-	.macro	fpu_restore_double thread status tmp=t0
-	lw	\tmp, THREAD_FCR31(\thread)
-	ldc1	$f0,  THREAD_FPR0(\thread)
-	ldc1	$f2,  THREAD_FPR2(\thread)
-	ldc1	$f4,  THREAD_FPR4(\thread)
-	ldc1	$f6,  THREAD_FPR6(\thread)
-	ldc1	$f8,  THREAD_FPR8(\thread)
-	ldc1	$f10, THREAD_FPR10(\thread)
-	ldc1	$f12, THREAD_FPR12(\thread)
-	ldc1	$f14, THREAD_FPR14(\thread)
-	ldc1	$f16, THREAD_FPR16(\thread)
-	ldc1	$f18, THREAD_FPR18(\thread)
-	ldc1	$f20, THREAD_FPR20(\thread)
-	ldc1	$f22, THREAD_FPR22(\thread)
-	ldc1	$f24, THREAD_FPR24(\thread)
-	ldc1	$f26, THREAD_FPR26(\thread)
-	ldc1	$f28, THREAD_FPR28(\thread)
-	ldc1	$f30, THREAD_FPR30(\thread)
-	ctc1	\tmp, fcr31
-	.endm
-
 	.macro	fpu_restore_single thread tmp=t0
 	lw	\tmp, THREAD_FCR31(\thread)
 	lwc1	$f0,  THREAD_FPR0(\thread)

arch/mips/include/asm/asmmacro-64.h

@@ -13,102 +13,6 @@
 #include <asm/fpregdef.h>
 #include <asm/mipsregs.h>
 
-	.macro	fpu_save_16even thread tmp=t0
-	cfc1	\tmp, fcr31
-	sdc1	$f0,  THREAD_FPR0(\thread)
-	sdc1	$f2,  THREAD_FPR2(\thread)
-	sdc1	$f4,  THREAD_FPR4(\thread)
-	sdc1	$f6,  THREAD_FPR6(\thread)
-	sdc1	$f8,  THREAD_FPR8(\thread)
-	sdc1	$f10, THREAD_FPR10(\thread)
-	sdc1	$f12, THREAD_FPR12(\thread)
-	sdc1	$f14, THREAD_FPR14(\thread)
-	sdc1	$f16, THREAD_FPR16(\thread)
-	sdc1	$f18, THREAD_FPR18(\thread)
-	sdc1	$f20, THREAD_FPR20(\thread)
-	sdc1	$f22, THREAD_FPR22(\thread)
-	sdc1	$f24, THREAD_FPR24(\thread)
-	sdc1	$f26, THREAD_FPR26(\thread)
-	sdc1	$f28, THREAD_FPR28(\thread)
-	sdc1	$f30, THREAD_FPR30(\thread)
-	sw	\tmp, THREAD_FCR31(\thread)
-	.endm
-
-	.macro	fpu_save_16odd thread
-	sdc1	$f1,  THREAD_FPR1(\thread)
-	sdc1	$f3,  THREAD_FPR3(\thread)
-	sdc1	$f5,  THREAD_FPR5(\thread)
-	sdc1	$f7,  THREAD_FPR7(\thread)
-	sdc1	$f9,  THREAD_FPR9(\thread)
-	sdc1	$f11, THREAD_FPR11(\thread)
-	sdc1	$f13, THREAD_FPR13(\thread)
-	sdc1	$f15, THREAD_FPR15(\thread)
-	sdc1	$f17, THREAD_FPR17(\thread)
-	sdc1	$f19, THREAD_FPR19(\thread)
-	sdc1	$f21, THREAD_FPR21(\thread)
-	sdc1	$f23, THREAD_FPR23(\thread)
-	sdc1	$f25, THREAD_FPR25(\thread)
-	sdc1	$f27, THREAD_FPR27(\thread)
-	sdc1	$f29, THREAD_FPR29(\thread)
-	sdc1	$f31, THREAD_FPR31(\thread)
-	.endm
-
-	.macro	fpu_save_double thread status tmp
-	sll	\tmp, \status, 5
-	bgez	\tmp, 2f
-	fpu_save_16odd \thread
-2:
-	fpu_save_16even \thread \tmp
-	.endm
-
-	.macro	fpu_restore_16even thread tmp=t0
-	lw	\tmp, THREAD_FCR31(\thread)
-	ldc1	$f0,  THREAD_FPR0(\thread)
-	ldc1	$f2,  THREAD_FPR2(\thread)
-	ldc1	$f4,  THREAD_FPR4(\thread)
-	ldc1	$f6,  THREAD_FPR6(\thread)
-	ldc1	$f8,  THREAD_FPR8(\thread)
-	ldc1	$f10, THREAD_FPR10(\thread)
-	ldc1	$f12, THREAD_FPR12(\thread)
-	ldc1	$f14, THREAD_FPR14(\thread)
-	ldc1	$f16, THREAD_FPR16(\thread)
-	ldc1	$f18, THREAD_FPR18(\thread)
-	ldc1	$f20, THREAD_FPR20(\thread)
-	ldc1	$f22, THREAD_FPR22(\thread)
-	ldc1	$f24, THREAD_FPR24(\thread)
-	ldc1	$f26, THREAD_FPR26(\thread)
-	ldc1	$f28, THREAD_FPR28(\thread)
-	ldc1	$f30, THREAD_FPR30(\thread)
-	ctc1	\tmp, fcr31
-	.endm
-
-	.macro	fpu_restore_16odd thread
-	ldc1	$f1,  THREAD_FPR1(\thread)
-	ldc1	$f3,  THREAD_FPR3(\thread)
-	ldc1	$f5,  THREAD_FPR5(\thread)
-	ldc1	$f7,  THREAD_FPR7(\thread)
-	ldc1	$f9,  THREAD_FPR9(\thread)
-	ldc1	$f11, THREAD_FPR11(\thread)
-	ldc1	$f13, THREAD_FPR13(\thread)
-	ldc1	$f15, THREAD_FPR15(\thread)
-	ldc1	$f17, THREAD_FPR17(\thread)
-	ldc1	$f19, THREAD_FPR19(\thread)
-	ldc1	$f21, THREAD_FPR21(\thread)
-	ldc1	$f23, THREAD_FPR23(\thread)
-	ldc1	$f25, THREAD_FPR25(\thread)
-	ldc1	$f27, THREAD_FPR27(\thread)
-	ldc1	$f29, THREAD_FPR29(\thread)
-	ldc1	$f31, THREAD_FPR31(\thread)
-	.endm
-
-	.macro	fpu_restore_double thread status tmp
-	sll	\tmp, \status, 5
-	bgez	\tmp, 1f				# 16 register mode?
-
-	fpu_restore_16odd \thread
-1:	fpu_restore_16even \thread \tmp
-	.endm
-
 	.macro	cpu_save_nonscratch thread
 	LONG_S	s0, THREAD_REG16(\thread)
 	LONG_S	s1, THREAD_REG17(\thread)

arch/mips/include/asm/asmmacro.h

@@ -62,6 +62,113 @@
 	.endm
 #endif /* CONFIG_MIPS_MT_SMTC */
 
+	.macro	fpu_save_16even thread tmp=t0
+	cfc1	\tmp, fcr31
+	sdc1	$f0,  THREAD_FPR0(\thread)
+	sdc1	$f2,  THREAD_FPR2(\thread)
+	sdc1	$f4,  THREAD_FPR4(\thread)
+	sdc1	$f6,  THREAD_FPR6(\thread)
+	sdc1	$f8,  THREAD_FPR8(\thread)
+	sdc1	$f10, THREAD_FPR10(\thread)
+	sdc1	$f12, THREAD_FPR12(\thread)
+	sdc1	$f14, THREAD_FPR14(\thread)
+	sdc1	$f16, THREAD_FPR16(\thread)
+	sdc1	$f18, THREAD_FPR18(\thread)
+	sdc1	$f20, THREAD_FPR20(\thread)
+	sdc1	$f22, THREAD_FPR22(\thread)
+	sdc1	$f24, THREAD_FPR24(\thread)
+	sdc1	$f26, THREAD_FPR26(\thread)
+	sdc1	$f28, THREAD_FPR28(\thread)
+	sdc1	$f30, THREAD_FPR30(\thread)
+	sw	\tmp, THREAD_FCR31(\thread)
+	.endm
+
+	.macro	fpu_save_16odd thread
+	.set	push
+	.set	mips64r2
+	sdc1	$f1,  THREAD_FPR1(\thread)
+	sdc1	$f3,  THREAD_FPR3(\thread)
+	sdc1	$f5,  THREAD_FPR5(\thread)
+	sdc1	$f7,  THREAD_FPR7(\thread)
+	sdc1	$f9,  THREAD_FPR9(\thread)
+	sdc1	$f11, THREAD_FPR11(\thread)
+	sdc1	$f13, THREAD_FPR13(\thread)
+	sdc1	$f15, THREAD_FPR15(\thread)
+	sdc1	$f17, THREAD_FPR17(\thread)
+	sdc1	$f19, THREAD_FPR19(\thread)
+	sdc1	$f21, THREAD_FPR21(\thread)
+	sdc1	$f23, THREAD_FPR23(\thread)
+	sdc1	$f25, THREAD_FPR25(\thread)
+	sdc1	$f27, THREAD_FPR27(\thread)
+	sdc1	$f29, THREAD_FPR29(\thread)
+	sdc1	$f31, THREAD_FPR31(\thread)
+	.set	pop
+	.endm
+
+	.macro	fpu_save_double thread status tmp
+#if defined(CONFIG_MIPS64) || defined(CONFIG_CPU_MIPS32_R2)
+	sll	\tmp, \status, 5
+	bgez	\tmp, 10f
+	fpu_save_16odd \thread
+10:
+#endif
+	fpu_save_16even \thread \tmp
+	.endm
+
+	.macro	fpu_restore_16even thread tmp=t0
+	lw	\tmp, THREAD_FCR31(\thread)
+	ldc1	$f0,  THREAD_FPR0(\thread)
+	ldc1	$f2,  THREAD_FPR2(\thread)
+	ldc1	$f4,  THREAD_FPR4(\thread)
+	ldc1	$f6,  THREAD_FPR6(\thread)
+	ldc1	$f8,  THREAD_FPR8(\thread)
+	ldc1	$f10, THREAD_FPR10(\thread)
+	ldc1	$f12, THREAD_FPR12(\thread)
+	ldc1	$f14, THREAD_FPR14(\thread)
+	ldc1	$f16, THREAD_FPR16(\thread)
+	ldc1	$f18, THREAD_FPR18(\thread)
+	ldc1	$f20, THREAD_FPR20(\thread)
+	ldc1	$f22, THREAD_FPR22(\thread)
+	ldc1	$f24, THREAD_FPR24(\thread)
+	ldc1	$f26, THREAD_FPR26(\thread)
+	ldc1	$f28, THREAD_FPR28(\thread)
+	ldc1	$f30, THREAD_FPR30(\thread)
+	ctc1	\tmp, fcr31
+	.endm
+
+	.macro	fpu_restore_16odd thread
+	.set	push
+	.set	mips64r2
+	ldc1	$f1,  THREAD_FPR1(\thread)
+	ldc1	$f3,  THREAD_FPR3(\thread)
+	ldc1	$f5,  THREAD_FPR5(\thread)
+	ldc1	$f7,  THREAD_FPR7(\thread)
+	ldc1	$f9,  THREAD_FPR9(\thread)
+	ldc1	$f11, THREAD_FPR11(\thread)
+	ldc1	$f13, THREAD_FPR13(\thread)
+	ldc1	$f15, THREAD_FPR15(\thread)
+	ldc1	$f17, THREAD_FPR17(\thread)
+	ldc1	$f19, THREAD_FPR19(\thread)
+	ldc1	$f21, THREAD_FPR21(\thread)
+	ldc1	$f23, THREAD_FPR23(\thread)
+	ldc1	$f25, THREAD_FPR25(\thread)
+	ldc1	$f27, THREAD_FPR27(\thread)
+	ldc1	$f29, THREAD_FPR29(\thread)
+	ldc1	$f31, THREAD_FPR31(\thread)
+	.set	pop
+	.endm
+
+	.macro	fpu_restore_double thread status tmp
+#if defined(CONFIG_MIPS64) || defined(CONFIG_CPU_MIPS32_R2)
+	sll	\tmp, \status, 5
+	bgez	\tmp, 10f				# 16 register mode?
+
+	fpu_restore_16odd \thread
+10:
+#endif
+	fpu_restore_16even \thread \tmp
+	.endm
+
 /*
  * Temporary until all gas have MT ASE support
  */

arch/mips/include/asm/bmips.h

@@ -46,8 +46,35 @@
 
 #include <linux/cpumask.h>
 #include <asm/r4kcache.h>
+#include <asm/smp-ops.h>
+
+extern struct plat_smp_ops bmips43xx_smp_ops;
+extern struct plat_smp_ops bmips5000_smp_ops;
+
+static inline int register_bmips_smp_ops(void)
+{
+#if IS_ENABLED(CONFIG_CPU_BMIPS) && IS_ENABLED(CONFIG_SMP)
+	switch (current_cpu_type()) {
+	case CPU_BMIPS32:
+	case CPU_BMIPS3300:
+		return register_up_smp_ops();
+	case CPU_BMIPS4350:
+	case CPU_BMIPS4380:
+		register_smp_ops(&bmips43xx_smp_ops);
+		break;
+	case CPU_BMIPS5000:
+		register_smp_ops(&bmips5000_smp_ops);
+		break;
+	default:
+		return -ENODEV;
+	}
+
+	return 0;
+#else
+	return -ENODEV;
+#endif
+}
 
-extern struct plat_smp_ops bmips_smp_ops;
 extern char bmips_reset_nmi_vec;
 extern char bmips_reset_nmi_vec_end;
 extern char bmips_smp_movevec;

arch/mips/include/asm/cpu-features.h

@@ -20,6 +20,13 @@
 #ifndef cpu_has_tlb
 #define cpu_has_tlb		(cpu_data[0].options & MIPS_CPU_TLB)
 #endif
+#ifndef cpu_has_tlbinv
+#define cpu_has_tlbinv		(cpu_data[0].options & MIPS_CPU_TLBINV)
+#endif
+#ifndef cpu_has_segments
+#define cpu_has_segments	(cpu_data[0].options & MIPS_CPU_SEGMENTS)
+#endif
+
 
 /*
  * For the moment we don't consider R6000 and R8000 so we can assume that

arch/mips/include/asm/cpu-info.h

@@ -52,6 +52,9 @@ struct cpuinfo_mips {
 	unsigned int		cputype;
 	int			isa_level;
 	int			tlbsize;
+	int			tlbsizevtlb;
+	int			tlbsizeftlbsets;
+	int			tlbsizeftlbways;
 	struct cache_desc	icache; /* Primary I-cache */
 	struct cache_desc	dcache; /* Primary D or combined I/D cache */
 	struct cache_desc	scache; /* Secondary cache */

arch/mips/include/asm/cpu-type.h

@@ -27,10 +27,7 @@ static inline int __pure __get_cpu_type(const int cpu_type)
 #ifdef CONFIG_SYS_HAS_CPU_MIPS32_R1
 	case CPU_4KC:
 	case CPU_ALCHEMY:
-	case CPU_BMIPS3300:
-	case CPU_BMIPS4350:
 	case CPU_PR4450:
-	case CPU_BMIPS32:
 	case CPU_JZRISC:
 #endif
 
@@ -47,6 +44,8 @@ static inline int __pure __get_cpu_type(const int cpu_type)
 	case CPU_74K:
 	case CPU_M14KC:
 	case CPU_M14KEC:
+	case CPU_INTERAPTIV:
+	case CPU_PROAPTIV:
 #endif
 
 #ifdef CONFIG_SYS_HAS_CPU_MIPS64_R1
@@ -163,6 +162,16 @@ static inline int __pure __get_cpu_type(const int cpu_type)
 	case CPU_CAVIUM_OCTEON2:
 #endif
 
+#if defined(CONFIG_SYS_HAS_CPU_BMIPS32_3300) || \
+	defined (CONFIG_SYS_HAS_CPU_MIPS32_R1)
+	case CPU_BMIPS32:
+	case CPU_BMIPS3300:
+#endif
+
+#ifdef CONFIG_SYS_HAS_CPU_BMIPS4350
+	case CPU_BMIPS4350:
+#endif
+
 #ifdef CONFIG_SYS_HAS_CPU_BMIPS4380
 	case CPU_BMIPS4380:
 #endif

arch/mips/include/asm/cpu.h

@@ -111,6 +111,10 @@
 #define PRID_IMP_1074K		0x9a00
 #define PRID_IMP_M14KC		0x9c00
 #define PRID_IMP_M14KEC		0x9e00
+#define PRID_IMP_INTERAPTIV_UP	0xa000
+#define PRID_IMP_INTERAPTIV_MP	0xa100
+#define PRID_IMP_PROAPTIV_UP	0xa200
+#define PRID_IMP_PROAPTIV_MP	0xa300
 
 /*
  * These are the PRID's for when 23:16 == PRID_COMP_SIBYTE
@@ -194,6 +198,7 @@
 #define PRID_IMP_NETLOGIC_XLP8XX	0x1000
 #define PRID_IMP_NETLOGIC_XLP3XX	0x1100
 #define PRID_IMP_NETLOGIC_XLP2XX	0x1200
+#define PRID_IMP_NETLOGIC_XLP9XX	0x1500
 
 /*
  * Particular Revision values for bits 7:0 of the PRId register.
@@ -249,6 +254,8 @@
 
 #define FPIR_IMP_NONE		0x0000
 
+#if !defined(__ASSEMBLY__)
+
 enum cpu_type_enum {
 	CPU_UNKNOWN,
 
@@ -289,7 +296,7 @@ enum cpu_type_enum {
 	CPU_4KC, CPU_4KEC, CPU_4KSC, CPU_24K, CPU_34K, CPU_1004K, CPU_74K,
 	CPU_ALCHEMY, CPU_PR4450, CPU_BMIPS32, CPU_BMIPS3300, CPU_BMIPS4350,
 	CPU_BMIPS4380, CPU_BMIPS5000, CPU_JZRISC, CPU_LOONGSON1, CPU_M14KC,
-	CPU_M14KEC,
+	CPU_M14KEC, CPU_INTERAPTIV, CPU_PROAPTIV,
 
 	/*
 	 * MIPS64 class processors
@@ -301,6 +308,7 @@ enum cpu_type_enum {
 	CPU_LAST
 };
 
+#endif /* !__ASSEMBLY */
 
 /*
  * ISA Level encodings
@@ -348,6 +356,8 @@ enum cpu_type_enum {
 #define MIPS_CPU_PCI		0x00400000 /* CPU has Perf Ctr Int indicator */
 #define MIPS_CPU_RIXI		0x00800000 /* CPU has TLB Read/eXec Inhibit */
 #define MIPS_CPU_MICROMIPS	0x01000000 /* CPU has microMIPS capability */
+#define MIPS_CPU_TLBINV		0x02000000 /* CPU supports TLBINV/F */
+#define MIPS_CPU_SEGMENTS	0x04000000 /* CPU supports Segmentation Control registers */
 
 /*
  * CPU ASE encodings

arch/mips/include/asm/dma-coherence.h

@@ -9,7 +9,16 @@
 #ifndef __ASM_DMA_COHERENCE_H
 #define __ASM_DMA_COHERENCE_H
 
+#ifdef CONFIG_DMA_MAYBE_COHERENT
 extern int coherentio;
 extern int hw_coherentio;
+#else
+#ifdef CONFIG_DMA_COHERENT
+#define coherentio	1
+#else
+#define coherentio	0
+#endif
+#define hw_coherentio	0
+#endif /* CONFIG_DMA_MAYBE_COHERENT */
 
 #endif

arch/mips/include/asm/elf.h

@@ -36,6 +36,7 @@
 #define EF_MIPS_ABI2		0x00000020
 #define EF_MIPS_OPTIONS_FIRST	0x00000080
 #define EF_MIPS_32BITMODE	0x00000100
+#define EF_MIPS_FP64		0x00000200
 #define EF_MIPS_ABI		0x0000f000
 #define EF_MIPS_ARCH		0xf0000000
 
@@ -175,6 +176,18 @@ typedef elf_fpreg_t elf_fpregset_t[ELF_NFPREG];
 
 #ifdef CONFIG_32BIT
 
+/*
+ * In order to be sure that we don't attempt to execute an O32 binary which
+ * requires 64 bit FP (FR=1) on a system which does not support it we refuse
+ * to execute any binary which has bits specified by the following macro set
+ * in its ELF header flags.
+ */
+#ifdef CONFIG_MIPS_O32_FP64_SUPPORT
+# define __MIPS_O32_FP64_MUST_BE_ZERO	0
+#else
+# define __MIPS_O32_FP64_MUST_BE_ZERO	EF_MIPS_FP64
+#endif
+
 /*
  * This is used to ensure we don't load something for the wrong architecture.
  */
@@ -191,6 +204,8 @@ typedef elf_fpreg_t elf_fpregset_t[ELF_NFPREG];
 		__res = 0;						\
 	if (((__h->e_flags & EF_MIPS_ABI) != 0) &&			\
 	    ((__h->e_flags & EF_MIPS_ABI) != EF_MIPS_ABI_O32))		\
+		__res = 0;						\
+	if (__h->e_flags & __MIPS_O32_FP64_MUST_BE_ZERO)		\
 		__res = 0;						\
 									\
 	__res;								\
@@ -249,6 +264,11 @@ extern struct mips_abi mips_abi_n32;
 
 #define SET_PERSONALITY(ex)						\
 do {									\
+	if ((ex).e_flags & EF_MIPS_FP64)				\
+		clear_thread_flag(TIF_32BIT_FPREGS);			\
+	else								\
+		set_thread_flag(TIF_32BIT_FPREGS);			\
+									\
 	if (personality(current->personality) != PER_LINUX)		\
 		set_personality(PER_LINUX);				\
 									\
@@ -271,14 +291,18 @@ do {									\
 #endif
 
 #ifdef CONFIG_MIPS32_O32
-#define __SET_PERSONALITY32_O32()					\
+#define __SET_PERSONALITY32_O32(ex)					\
 	do {								\
 		set_thread_flag(TIF_32BIT_REGS);			\
 		set_thread_flag(TIF_32BIT_ADDR);			\
+									\
+		if (!((ex).e_flags & EF_MIPS_FP64))			\
+			set_thread_flag(TIF_32BIT_FPREGS);		\
+									\
 		current->thread.abi = &mips_abi_32;			\
 	} while (0)
 #else
-#define __SET_PERSONALITY32_O32()					\
+#define __SET_PERSONALITY32_O32(ex)					\
 	do { } while (0)
 #endif
 
@@ -289,7 +313,7 @@ do {									\
 	     ((ex).e_flags & EF_MIPS_ABI) == 0)				\
 		__SET_PERSONALITY32_N32();				\
 	else								\
-		__SET_PERSONALITY32_O32();				\
+		__SET_PERSONALITY32_O32(ex);                            \
 } while (0)
 #else
 #define __SET_PERSONALITY32(ex) do { } while (0)
@@ -300,6 +324,7 @@ do {									\
 	unsigned int p;							\
 									\
 	clear_thread_flag(TIF_32BIT_REGS);				\
+	clear_thread_flag(TIF_32BIT_FPREGS);				\
 	clear_thread_flag(TIF_32BIT_ADDR);				\
 									\
 	if ((ex).e_ident[EI_CLASS] == ELFCLASS32)			\

arch/mips/include/asm/fpu.h

@@ -33,11 +33,48 @@ extern void _init_fpu(void);
 extern void _save_fp(struct task_struct *);
 extern void _restore_fp(struct task_struct *);
 
-#define __enable_fpu()							\
-do {									\
-	set_c0_status(ST0_CU1);						\
-	enable_fpu_hazard();						\
-} while (0)
+/*
+ * This enum specifies a mode in which we want the FPU to operate, for cores
+ * which implement the Status.FR bit. Note that FPU_32BIT & FPU_64BIT
+ * purposefully have the values 0 & 1 respectively, so that an integer value
+ * of Status.FR can be trivially casted to the corresponding enum fpu_mode.
+ */
+enum fpu_mode {
+	FPU_32BIT = 0,		/* FR = 0 */
+	FPU_64BIT,		/* FR = 1 */
+	FPU_AS_IS,
+};
+
+static inline int __enable_fpu(enum fpu_mode mode)
+{
+	int fr;
+
+	switch (mode) {
+	case FPU_AS_IS:
+		/* just enable the FPU in its current mode */
+		set_c0_status(ST0_CU1);
+		enable_fpu_hazard();
+		return 0;
+
+	case FPU_64BIT:
+#if !(defined(CONFIG_CPU_MIPS32_R2) || defined(CONFIG_MIPS64))
+		/* we only have a 32-bit FPU */
+		return SIGFPE;
+#endif
+		/* fall through */
+	case FPU_32BIT:
+		/* set CU1 & change FR appropriately */
+		fr = (int)mode;
+		change_c0_status(ST0_CU1 | ST0_FR, ST0_CU1 | (fr ? ST0_FR : 0));
+		enable_fpu_hazard();
+
+		/* check FR has the desired value */
+		return (!!(read_c0_status() & ST0_FR) == !!fr) ? 0 : SIGFPE;
+
+	default:
+		BUG();
+	}
+}
 
 #define __disable_fpu()							\
 do {									\
@@ -45,19 +82,6 @@ do {									\
 	disable_fpu_hazard();						\
 } while (0)
 
-#define enable_fpu()							\
-do {									\
-	if (cpu_has_fpu)						\
-		__enable_fpu();						\
-} while (0)
-
-#define disable_fpu()							\
-do {									\
-	if (cpu_has_fpu)						\
-		__disable_fpu();					\
-} while (0)
-
-
 #define clear_fpu_owner()	clear_thread_flag(TIF_USEDFPU)
 
 static inline int __is_fpu_owner(void)
@@ -70,27 +94,46 @@ static inline int is_fpu_owner(void)
 	return cpu_has_fpu && __is_fpu_owner();
 }
 
-static inline void __own_fpu(void)
+static inline int __own_fpu(void)
 {
-	__enable_fpu();
+	enum fpu_mode mode;
+	int ret;
+
+	mode = !test_thread_flag(TIF_32BIT_FPREGS);
+	ret = __enable_fpu(mode);
+	if (ret)
+		return ret;
+
 	KSTK_STATUS(current) |= ST0_CU1;
+	if (mode == FPU_64BIT)
+		KSTK_STATUS(current) |= ST0_FR;
+	else /* mode == FPU_32BIT */
+		KSTK_STATUS(current) &= ~ST0_FR;
+
 	set_thread_flag(TIF_USEDFPU);
+	return 0;
 }
 
-static inline void own_fpu_inatomic(int restore)
+static inline int own_fpu_inatomic(int restore)
 {
+	int ret = 0;
+
 	if (cpu_has_fpu && !__is_fpu_owner()) {
-		__own_fpu();
-		if (restore)
+		ret = __own_fpu();
+		if (restore && !ret)
 			_restore_fp(current);
 	}
+	return ret;
 }
 
-static inline void own_fpu(int restore)
+static inline int own_fpu(int restore)
 {
+	int ret;
+
 	preempt_disable();
-	own_fpu_inatomic(restore);
+	ret = own_fpu_inatomic(restore);
 	preempt_enable();
+	return ret;
 }
 
 static inline void lose_fpu(int save)
@@ -106,16 +149,21 @@ static inline void lose_fpu(int save)
 	preempt_enable();
 }
 
-static inline void init_fpu(void)
+static inline int init_fpu(void)
 {
+	int ret = 0;
+
 	preempt_disable();
 	if (cpu_has_fpu) {
-		__own_fpu();
-		_init_fpu();
+		ret = __own_fpu();
+		if (!ret)
+			_init_fpu();
 	} else {
 		fpu_emulator_init_fpu();
 	}
+
 	preempt_enable();
+	return ret;
 }
 
 static inline void save_fp(struct task_struct *tsk)

arch/mips/include/asm/highmem.h

@@ -19,7 +19,6 @@
 
 #ifdef __KERNEL__
 
-#include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/uaccess.h>
 #include <asm/kmap_types.h>

arch/mips/include/asm/kvm_host.h

@@ -391,9 +391,6 @@ struct kvm_vcpu_arch {
 	uint32_t guest_kernel_asid[NR_CPUS];
 	struct mm_struct guest_kernel_mm, guest_user_mm;
 
-	struct kvm_mips_tlb shadow_tlb[NR_CPUS][KVM_MIPS_GUEST_TLB_SIZE];
-
-
 	struct hrtimer comparecount_timer;
 
 	int last_sched_cpu;
@@ -529,7 +526,6 @@ extern enum emulation_result kvm_mips_handle_tlbmod(unsigned long cause,
 
 extern void kvm_mips_dump_host_tlbs(void);
 extern void kvm_mips_dump_guest_tlbs(struct kvm_vcpu *vcpu);
-extern void kvm_mips_dump_shadow_tlbs(struct kvm_vcpu *vcpu);
 extern void kvm_mips_flush_host_tlb(int skip_kseg0);
 extern int kvm_mips_host_tlb_inv(struct kvm_vcpu *vcpu, unsigned long entryhi);
 extern int kvm_mips_host_tlb_inv_index(struct kvm_vcpu *vcpu, int index);
@@ -541,10 +537,7 @@ extern unsigned long kvm_mips_translate_guest_kseg0_to_hpa(struct kvm_vcpu *vcpu
 						   unsigned long gva);
 extern void kvm_get_new_mmu_context(struct mm_struct *mm, unsigned long cpu,
 				    struct kvm_vcpu *vcpu);
-extern void kvm_shadow_tlb_put(struct kvm_vcpu *vcpu);
-extern void kvm_shadow_tlb_load(struct kvm_vcpu *vcpu);
 extern void kvm_local_flush_tlb_all(void);
-extern void kvm_mips_init_shadow_tlb(struct kvm_vcpu *vcpu);
 extern void kvm_mips_alloc_new_mmu_context(struct kvm_vcpu *vcpu);
 extern void kvm_mips_vcpu_load(struct kvm_vcpu *vcpu, int cpu);
 extern void kvm_mips_vcpu_put(struct kvm_vcpu *vcpu);

arch/mips/include/asm/mach-ath79/ar71xx_regs.h

@@ -16,7 +16,6 @@
 #define __ASM_MACH_AR71XX_REGS_H
 
 #include <linux/types.h>
-#include <linux/init.h>
 #include <linux/io.h>
 #include <linux/bitops.h>
 

arch/mips/include/asm/mach-bcm47xx/bcm47xx.h

@@ -56,4 +56,6 @@ void bcm47xx_fill_bcma_boardinfo(struct bcma_boardinfo *boardinfo,
 				 const char *prefix);
 #endif
 
+void bcm47xx_set_system_type(u16 chip_id);
+
 #endif /* __ASM_BCM47XX_H */

arch/mips/include/asm/mach-bcm47xx/bcm47xx_board.h

@@ -66,6 +66,7 @@ enum bcm47xx_board {
 	BCM47XX_BOARD_LINKSYS_WRT310NV1,
 	BCM47XX_BOARD_LINKSYS_WRT310NV2,
 	BCM47XX_BOARD_LINKSYS_WRT54G3GV2,
+	BCM47XX_BOARD_LINKSYS_WRT54GSV1,
 	BCM47XX_BOARD_LINKSYS_WRT610NV1,
 	BCM47XX_BOARD_LINKSYS_WRT610NV2,
 	BCM47XX_BOARD_LINKSYS_WRTSL54GS,

arch/mips/include/asm/mach-bcm47xx/cpu-feature-overrides.h

@@ -0,0 +1,82 @@
+#ifndef __ASM_MACH_BCM47XX_CPU_FEATURE_OVERRIDES_H
+#define __ASM_MACH_BCM47XX_CPU_FEATURE_OVERRIDES_H
+
+#define cpu_has_tlb			1
+#define cpu_has_4kex			1
+#define cpu_has_3k_cache		0
+#define cpu_has_4k_cache		1
+#define cpu_has_tx39_cache		0
+#define cpu_has_fpu			0
+#define cpu_has_32fpr			0
+#define cpu_has_counter			1
+#if defined(CONFIG_BCM47XX_BCMA) && !defined(CONFIG_BCM47XX_SSB)
+#define cpu_has_watch			1
+#elif defined(CONFIG_BCM47XX_SSB) && !defined(CONFIG_BCM47XX_BCMA)
+#define cpu_has_watch			0
+#endif
+#define cpu_has_divec			1
+#define cpu_has_vce			0
+#define cpu_has_cache_cdex_p		0
+#define cpu_has_cache_cdex_s		0
+#define cpu_has_prefetch		1
+#define cpu_has_mcheck			1
+#define cpu_has_ejtag			1
+#define cpu_has_llsc			1
+
+/* cpu_has_mips16 */
+#define cpu_has_mdmx			0
+#define cpu_has_mips3d			0
+#define cpu_has_rixi			0
+#define cpu_has_mmips			0
+#define cpu_has_smartmips		0
+#define cpu_has_vtag_icache		0
+/* cpu_has_dc_aliases */
+#define cpu_has_ic_fills_f_dc		0
+#define cpu_has_pindexed_dcache		0
+#define cpu_icache_snoops_remote_store	0
+
+#define cpu_has_mips_2			1
+#define cpu_has_mips_3			0
+#define cpu_has_mips32r1		1
+#if defined(CONFIG_BCM47XX_BCMA) && !defined(CONFIG_BCM47XX_SSB)
+#define cpu_has_mips32r2		1
+#elif defined(CONFIG_BCM47XX_SSB) && !defined(CONFIG_BCM47XX_BCMA)
+#define cpu_has_mips32r2		0
+#endif
+#define cpu_has_mips64r1		0
+#define cpu_has_mips64r2		0
+
+#if defined(CONFIG_BCM47XX_BCMA) && !defined(CONFIG_BCM47XX_SSB)
+#define cpu_has_dsp			1
+#define cpu_has_dsp2			1
+#elif defined(CONFIG_BCM47XX_SSB) && !defined(CONFIG_BCM47XX_BCMA)
+#define cpu_has_dsp			0
+#define cpu_has_dsp2			0
+#endif
+#define cpu_has_mipsmt			0
+/* cpu_has_userlocal */
+
+#define cpu_has_nofpuex			0
+#define cpu_has_64bits			0
+#define cpu_has_64bit_zero_reg		0
+#if defined(CONFIG_BCM47XX_BCMA) && !defined(CONFIG_BCM47XX_SSB)
+#define cpu_has_vint			1
+#elif defined(CONFIG_BCM47XX_SSB) && !defined(CONFIG_BCM47XX_BCMA)
+#define cpu_has_vint			0
+#endif
+#define cpu_has_veic			0
+#define cpu_has_inclusive_pcaches	0
+
+#if defined(CONFIG_BCM47XX_BCMA) && !defined(CONFIG_BCM47XX_SSB)
+#define cpu_dcache_line_size()		32
+#define cpu_icache_line_size()		32
+#define cpu_has_perf_cntr_intr_bit	1
+#elif defined(CONFIG_BCM47XX_SSB) && !defined(CONFIG_BCM47XX_BCMA)
+#define cpu_dcache_line_size()		16
+#define cpu_icache_line_size()		16
+#define cpu_has_perf_cntr_intr_bit	0
+#endif
+#define cpu_scache_line_size()		0
+#define cpu_has_vz			0
+
+#endif /* __ASM_MACH_BCM47XX_CPU_FEATURE_OVERRIDES_H */

arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h

@@ -145,6 +145,7 @@ enum bcm63xx_regs_set {
 	RSET_UART1,
 	RSET_GPIO,
 	RSET_SPI,
+	RSET_HSSPI,
 	RSET_UDC0,
 	RSET_OHCI0,
 	RSET_OHCI_PRIV,
@@ -193,6 +194,7 @@ enum bcm63xx_regs_set {
 #define RSET_ENETDMAS_SIZE(chans)	(16 * (chans))
 #define RSET_ENETSW_SIZE		65536
 #define RSET_UART_SIZE			24
+#define RSET_HSSPI_SIZE			1536
 #define RSET_UDC_SIZE			256
 #define RSET_OHCI_SIZE			256
 #define RSET_EHCI_SIZE			256
@@ -265,6 +267,7 @@ enum bcm63xx_regs_set {
 #define BCM_6328_UART1_BASE		(0xb0000120)
 #define BCM_6328_GPIO_BASE		(0xb0000080)
 #define BCM_6328_SPI_BASE		(0xdeadbeef)
+#define BCM_6328_HSSPI_BASE		(0xb0001000)
 #define BCM_6328_UDC0_BASE		(0xdeadbeef)
 #define BCM_6328_USBDMA_BASE		(0xb000c000)
 #define BCM_6328_OHCI0_BASE		(0xb0002600)
@@ -313,6 +316,7 @@ enum bcm63xx_regs_set {
 #define BCM_6338_UART1_BASE		(0xdeadbeef)
 #define BCM_6338_GPIO_BASE		(0xfffe0400)
 #define BCM_6338_SPI_BASE		(0xfffe0c00)
+#define BCM_6338_HSSPI_BASE		(0xdeadbeef)
 #define BCM_6338_UDC0_BASE		(0xdeadbeef)
 #define BCM_6338_USBDMA_BASE		(0xfffe2400)
 #define BCM_6338_OHCI0_BASE		(0xdeadbeef)
@@ -360,6 +364,7 @@ enum bcm63xx_regs_set {
 #define BCM_6345_UART1_BASE		(0xdeadbeef)
 #define BCM_6345_GPIO_BASE		(0xfffe0400)
 #define BCM_6345_SPI_BASE		(0xdeadbeef)
+#define BCM_6345_HSSPI_BASE		(0xdeadbeef)
 #define BCM_6345_UDC0_BASE		(0xdeadbeef)
 #define BCM_6345_USBDMA_BASE		(0xfffe2800)
 #define BCM_6345_ENET0_BASE		(0xfffe1800)
@@ -406,6 +411,7 @@ enum bcm63xx_regs_set {
 #define BCM_6348_UART1_BASE		(0xdeadbeef)
 #define BCM_6348_GPIO_BASE		(0xfffe0400)
 #define BCM_6348_SPI_BASE		(0xfffe0c00)
+#define BCM_6348_HSSPI_BASE		(0xdeadbeef)
 #define BCM_6348_UDC0_BASE		(0xfffe1000)
 #define BCM_6348_USBDMA_BASE		(0xdeadbeef)
 #define BCM_6348_OHCI0_BASE		(0xfffe1b00)
@@ -451,6 +457,7 @@ enum bcm63xx_regs_set {
 #define BCM_6358_UART1_BASE		(0xfffe0120)
 #define BCM_6358_GPIO_BASE		(0xfffe0080)
 #define BCM_6358_SPI_BASE		(0xfffe0800)
+#define BCM_6358_HSSPI_BASE		(0xdeadbeef)
 #define BCM_6358_UDC0_BASE		(0xfffe0800)
 #define BCM_6358_USBDMA_BASE		(0xdeadbeef)
 #define BCM_6358_OHCI0_BASE		(0xfffe1400)
@@ -553,6 +560,7 @@ enum bcm63xx_regs_set {
 #define BCM_6368_UART1_BASE		(0xb0000120)
 #define BCM_6368_GPIO_BASE		(0xb0000080)
 #define BCM_6368_SPI_BASE		(0xb0000800)
+#define BCM_6368_HSSPI_BASE		(0xdeadbeef)
 #define BCM_6368_UDC0_BASE		(0xdeadbeef)
 #define BCM_6368_USBDMA_BASE		(0xb0004800)
 #define BCM_6368_OHCI0_BASE		(0xb0001600)
@@ -604,6 +612,7 @@ extern const unsigned long *bcm63xx_regs_base;
 	__GEN_RSET_BASE(__cpu, UART1)					\
 	__GEN_RSET_BASE(__cpu, GPIO)					\
 	__GEN_RSET_BASE(__cpu, SPI)					\
+	__GEN_RSET_BASE(__cpu, HSSPI)					\
 	__GEN_RSET_BASE(__cpu, UDC0)					\
 	__GEN_RSET_BASE(__cpu, OHCI0)					\
 	__GEN_RSET_BASE(__cpu, OHCI_PRIV)				\
@@ -647,6 +656,7 @@ extern const unsigned long *bcm63xx_regs_base;
 	[RSET_UART1]		= BCM_## __cpu ##_UART1_BASE,		\
 	[RSET_GPIO]		= BCM_## __cpu ##_GPIO_BASE,		\
 	[RSET_SPI]		= BCM_## __cpu ##_SPI_BASE,		\
+	[RSET_HSSPI]		= BCM_## __cpu ##_HSSPI_BASE,		\
 	[RSET_UDC0]		= BCM_## __cpu ##_UDC0_BASE,		\
 	[RSET_OHCI0]		= BCM_## __cpu ##_OHCI0_BASE,		\
 	[RSET_OHCI_PRIV]	= BCM_## __cpu ##_OHCI_PRIV_BASE,	\
@@ -727,6 +737,7 @@ enum bcm63xx_irq {
 	IRQ_ENET0,
 	IRQ_ENET1,
 	IRQ_ENET_PHY,
+	IRQ_HSSPI,
 	IRQ_OHCI0,
 	IRQ_EHCI0,
 	IRQ_USBD,
@@ -815,6 +826,7 @@ enum bcm63xx_irq {
 #define BCM_6328_ENET0_IRQ		0
 #define BCM_6328_ENET1_IRQ		0
 #define BCM_6328_ENET_PHY_IRQ		(IRQ_INTERNAL_BASE + 12)
+#define BCM_6328_HSSPI_IRQ		(IRQ_INTERNAL_BASE + 29)
 #define BCM_6328_OHCI0_IRQ		(BCM_6328_HIGH_IRQ_BASE + 9)
 #define BCM_6328_EHCI0_IRQ		(BCM_6328_HIGH_IRQ_BASE + 10)
 #define BCM_6328_USBD_IRQ		(IRQ_INTERNAL_BASE + 4)
@@ -860,6 +872,7 @@ enum bcm63xx_irq {
 #define BCM_6338_ENET0_IRQ		(IRQ_INTERNAL_BASE + 8)
 #define BCM_6338_ENET1_IRQ		0
 #define BCM_6338_ENET_PHY_IRQ		(IRQ_INTERNAL_BASE + 9)
+#define BCM_6338_HSSPI_IRQ		0
 #define BCM_6338_OHCI0_IRQ		0
 #define BCM_6338_EHCI0_IRQ		0
 #define BCM_6338_USBD_IRQ		0
@@ -898,6 +911,7 @@ enum bcm63xx_irq {
 #define BCM_6345_ENET0_IRQ		(IRQ_INTERNAL_BASE + 8)
 #define BCM_6345_ENET1_IRQ		0
 #define BCM_6345_ENET_PHY_IRQ		(IRQ_INTERNAL_BASE + 12)
+#define BCM_6345_HSSPI_IRQ		0
 #define BCM_6345_OHCI0_IRQ		0
 #define BCM_6345_EHCI0_IRQ		0
 #define BCM_6345_USBD_IRQ		0
@@ -936,6 +950,7 @@ enum bcm63xx_irq {
 #define BCM_6348_ENET0_IRQ		(IRQ_INTERNAL_BASE + 8)
 #define BCM_6348_ENET1_IRQ		(IRQ_INTERNAL_BASE + 7)
 #define BCM_6348_ENET_PHY_IRQ		(IRQ_INTERNAL_BASE + 9)
+#define BCM_6348_HSSPI_IRQ		0
 #define BCM_6348_OHCI0_IRQ		(IRQ_INTERNAL_BASE + 12)
 #define BCM_6348_EHCI0_IRQ		0
 #define BCM_6348_USBD_IRQ		0
@@ -974,6 +989,7 @@ enum bcm63xx_irq {
 #define BCM_6358_ENET0_IRQ		(IRQ_INTERNAL_BASE + 8)
 #define BCM_6358_ENET1_IRQ		(IRQ_INTERNAL_BASE + 6)
 #define BCM_6358_ENET_PHY_IRQ		(IRQ_INTERNAL_BASE + 9)
+#define BCM_6358_HSSPI_IRQ		0
 #define BCM_6358_OHCI0_IRQ		(IRQ_INTERNAL_BASE + 5)
 #define BCM_6358_EHCI0_IRQ		(IRQ_INTERNAL_BASE + 10)
 #define BCM_6358_USBD_IRQ		0
@@ -1086,6 +1102,7 @@ enum bcm63xx_irq {
 #define BCM_6368_ENET0_IRQ		0
 #define BCM_6368_ENET1_IRQ		0
 #define BCM_6368_ENET_PHY_IRQ		(IRQ_INTERNAL_BASE + 15)
+#define BCM_6368_HSSPI_IRQ		0
 #define BCM_6368_OHCI0_IRQ		(IRQ_INTERNAL_BASE + 5)
 #define BCM_6368_EHCI0_IRQ		(IRQ_INTERNAL_BASE + 7)
 #define BCM_6368_USBD_IRQ		(IRQ_INTERNAL_BASE + 8)
@@ -1133,6 +1150,7 @@ extern const int *bcm63xx_irqs;
 	[IRQ_ENET0]		= BCM_## __cpu ##_ENET0_IRQ,		\
 	[IRQ_ENET1]		= BCM_## __cpu ##_ENET1_IRQ,		\
 	[IRQ_ENET_PHY]		= BCM_## __cpu ##_ENET_PHY_IRQ,		\
+	[IRQ_HSSPI]		= BCM_## __cpu ##_HSSPI_IRQ,		\
 	[IRQ_OHCI0]		= BCM_## __cpu ##_OHCI0_IRQ,		\
 	[IRQ_EHCI0]		= BCM_## __cpu ##_EHCI0_IRQ,		\
 	[IRQ_USBD]		= BCM_## __cpu ##_USBD_IRQ,		\

arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_hsspi.h

@@ -0,0 +1,8 @@
+#ifndef BCM63XX_DEV_HSSPI_H
+#define BCM63XX_DEV_HSSPI_H
+
+#include <linux/types.h>
+
+int bcm63xx_hsspi_register(void);
+
+#endif /* BCM63XX_DEV_HSSPI_H */

arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h

@@ -462,126 +462,6 @@
 /* Watchdog soft reset register (BCM6328 only) */
 #define WDT_SOFTRESET_REG		0xc
 
-/*************************************************************************
- * _REG relative to RSET_UARTx
- *************************************************************************/
-
-/* UART Control Register */
-#define UART_CTL_REG			0x0
-#define UART_CTL_RXTMOUTCNT_SHIFT	0
-#define UART_CTL_RXTMOUTCNT_MASK	(0x1f << UART_CTL_RXTMOUTCNT_SHIFT)
-#define UART_CTL_RSTTXDN_SHIFT		5
-#define UART_CTL_RSTTXDN_MASK		(1 << UART_CTL_RSTTXDN_SHIFT)
-#define UART_CTL_RSTRXFIFO_SHIFT		6
-#define UART_CTL_RSTRXFIFO_MASK		(1 << UART_CTL_RSTRXFIFO_SHIFT)
-#define UART_CTL_RSTTXFIFO_SHIFT		7
-#define UART_CTL_RSTTXFIFO_MASK		(1 << UART_CTL_RSTTXFIFO_SHIFT)
-#define UART_CTL_STOPBITS_SHIFT		8
-#define UART_CTL_STOPBITS_MASK		(0xf << UART_CTL_STOPBITS_SHIFT)
-#define UART_CTL_STOPBITS_1		(0x7 << UART_CTL_STOPBITS_SHIFT)
-#define UART_CTL_STOPBITS_2		(0xf << UART_CTL_STOPBITS_SHIFT)
-#define UART_CTL_BITSPERSYM_SHIFT	12
-#define UART_CTL_BITSPERSYM_MASK	(0x3 << UART_CTL_BITSPERSYM_SHIFT)
-#define UART_CTL_XMITBRK_SHIFT		14
-#define UART_CTL_XMITBRK_MASK		(1 << UART_CTL_XMITBRK_SHIFT)
-#define UART_CTL_RSVD_SHIFT		15
-#define UART_CTL_RSVD_MASK		(1 << UART_CTL_RSVD_SHIFT)
-#define UART_CTL_RXPAREVEN_SHIFT		16
-#define UART_CTL_RXPAREVEN_MASK		(1 << UART_CTL_RXPAREVEN_SHIFT)
-#define UART_CTL_RXPAREN_SHIFT		17
-#define UART_CTL_RXPAREN_MASK		(1 << UART_CTL_RXPAREN_SHIFT)
-#define UART_CTL_TXPAREVEN_SHIFT		18
-#define UART_CTL_TXPAREVEN_MASK		(1 << UART_CTL_TXPAREVEN_SHIFT)
-#define UART_CTL_TXPAREN_SHIFT		18
-#define UART_CTL_TXPAREN_MASK		(1 << UART_CTL_TXPAREN_SHIFT)
-#define UART_CTL_LOOPBACK_SHIFT		20
-#define UART_CTL_LOOPBACK_MASK		(1 << UART_CTL_LOOPBACK_SHIFT)
-#define UART_CTL_RXEN_SHIFT		21
-#define UART_CTL_RXEN_MASK		(1 << UART_CTL_RXEN_SHIFT)
-#define UART_CTL_TXEN_SHIFT		22
-#define UART_CTL_TXEN_MASK		(1 << UART_CTL_TXEN_SHIFT)
-#define UART_CTL_BRGEN_SHIFT		23
-#define UART_CTL_BRGEN_MASK		(1 << UART_CTL_BRGEN_SHIFT)
-
-/* UART Baudword register */
-#define UART_BAUD_REG			0x4
-
-/* UART Misc Control register */
-#define UART_MCTL_REG			0x8
-#define UART_MCTL_DTR_SHIFT		0
-#define UART_MCTL_DTR_MASK		(1 << UART_MCTL_DTR_SHIFT)
-#define UART_MCTL_RTS_SHIFT		1
-#define UART_MCTL_RTS_MASK		(1 << UART_MCTL_RTS_SHIFT)
-#define UART_MCTL_RXFIFOTHRESH_SHIFT	8
-#define UART_MCTL_RXFIFOTHRESH_MASK	(0xf << UART_MCTL_RXFIFOTHRESH_SHIFT)
-#define UART_MCTL_TXFIFOTHRESH_SHIFT	12
-#define UART_MCTL_TXFIFOTHRESH_MASK	(0xf << UART_MCTL_TXFIFOTHRESH_SHIFT)
-#define UART_MCTL_RXFIFOFILL_SHIFT	16
-#define UART_MCTL_RXFIFOFILL_MASK	(0x1f << UART_MCTL_RXFIFOFILL_SHIFT)
-#define UART_MCTL_TXFIFOFILL_SHIFT	24
-#define UART_MCTL_TXFIFOFILL_MASK	(0x1f << UART_MCTL_TXFIFOFILL_SHIFT)
-
-/* UART External Input Configuration register */
-#define UART_EXTINP_REG			0xc
-#define UART_EXTINP_RI_SHIFT		0
-#define UART_EXTINP_RI_MASK		(1 << UART_EXTINP_RI_SHIFT)
-#define UART_EXTINP_CTS_SHIFT		1
-#define UART_EXTINP_CTS_MASK		(1 << UART_EXTINP_CTS_SHIFT)
-#define UART_EXTINP_DCD_SHIFT		2
-#define UART_EXTINP_DCD_MASK		(1 << UART_EXTINP_DCD_SHIFT)
-#define UART_EXTINP_DSR_SHIFT		3
-#define UART_EXTINP_DSR_MASK		(1 << UART_EXTINP_DSR_SHIFT)
-#define UART_EXTINP_IRSTAT(x)		(1 << (x + 4))
-#define UART_EXTINP_IRMASK(x)		(1 << (x + 8))
-#define UART_EXTINP_IR_RI		0
-#define UART_EXTINP_IR_CTS		1
-#define UART_EXTINP_IR_DCD		2
-#define UART_EXTINP_IR_DSR		3
-#define UART_EXTINP_RI_NOSENSE_SHIFT	16
-#define UART_EXTINP_RI_NOSENSE_MASK	(1 << UART_EXTINP_RI_NOSENSE_SHIFT)
-#define UART_EXTINP_CTS_NOSENSE_SHIFT	17
-#define UART_EXTINP_CTS_NOSENSE_MASK	(1 << UART_EXTINP_CTS_NOSENSE_SHIFT)
-#define UART_EXTINP_DCD_NOSENSE_SHIFT	18
-#define UART_EXTINP_DCD_NOSENSE_MASK	(1 << UART_EXTINP_DCD_NOSENSE_SHIFT)
-#define UART_EXTINP_DSR_NOSENSE_SHIFT	19
-#define UART_EXTINP_DSR_NOSENSE_MASK	(1 << UART_EXTINP_DSR_NOSENSE_SHIFT)
-
-/* UART Interrupt register */
-#define UART_IR_REG			0x10
-#define UART_IR_MASK(x)			(1 << (x + 16))
-#define UART_IR_STAT(x)			(1 << (x))
-#define UART_IR_EXTIP			0
-#define UART_IR_TXUNDER			1
-#define UART_IR_TXOVER			2
-#define UART_IR_TXTRESH			3
-#define UART_IR_TXRDLATCH		4
-#define UART_IR_TXEMPTY			5
-#define UART_IR_RXUNDER			6
-#define UART_IR_RXOVER			7
-#define UART_IR_RXTIMEOUT		8
-#define UART_IR_RXFULL			9
-#define UART_IR_RXTHRESH		10
-#define UART_IR_RXNOTEMPTY		11
-#define UART_IR_RXFRAMEERR		12
-#define UART_IR_RXPARERR		13
-#define UART_IR_RXBRK			14
-#define UART_IR_TXDONE			15
-
-/* UART Fifo register */
-#define UART_FIFO_REG			0x14
-#define UART_FIFO_VALID_SHIFT		0
-#define UART_FIFO_VALID_MASK		0xff
-#define UART_FIFO_FRAMEERR_SHIFT	8
-#define UART_FIFO_FRAMEERR_MASK		(1 << UART_FIFO_FRAMEERR_SHIFT)
-#define UART_FIFO_PARERR_SHIFT		9
-#define UART_FIFO_PARERR_MASK		(1 << UART_FIFO_PARERR_SHIFT)
-#define UART_FIFO_BRKDET_SHIFT		10
-#define UART_FIFO_BRKDET_MASK		(1 << UART_FIFO_BRKDET_SHIFT)
-#define UART_FIFO_ANYERR_MASK		(UART_FIFO_FRAMEERR_MASK |	\
-					UART_FIFO_PARERR_MASK |		\
-					UART_FIFO_BRKDET_MASK)
-
-
 /*************************************************************************
  * _REG relative to RSET_GPIO
  *************************************************************************/

arch/mips/include/asm/mach-generic/dma-coherence.h

@@ -49,11 +49,7 @@ static inline int plat_dma_supported(struct device *dev, u64 mask)
 
 static inline int plat_device_is_coherent(struct device *dev)
 {
-#ifdef CONFIG_DMA_COHERENT
-	return 1;
-#else
 	return coherentio;
-#endif
 }
 
 #ifdef CONFIG_SWIOTLB

arch/mips/include/asm/mach-generic/floppy.h

@@ -9,7 +9,6 @@
 #define __ASM_MACH_GENERIC_FLOPPY_H
 
 #include <linux/delay.h>
-#include <linux/init.h>
 #include <linux/ioport.h>
 #include <linux/sched.h>
 #include <linux/linkage.h>

arch/mips/include/asm/mach-generic/ide.h

@@ -23,7 +23,7 @@
 static inline void __ide_flush_prologue(void)
 {
 #ifdef CONFIG_SMP
-	if (cpu_has_dc_aliases)
+	if (cpu_has_dc_aliases || !cpu_has_ic_fills_f_dc)
 		preempt_disable();
 #endif
 }
@@ -31,14 +31,14 @@ static inline void __ide_flush_prologue(void)
 static inline void __ide_flush_epilogue(void)
 {
 #ifdef CONFIG_SMP
-	if (cpu_has_dc_aliases)
+	if (cpu_has_dc_aliases || !cpu_has_ic_fills_f_dc)
 		preempt_enable();
 #endif
 }
 
 static inline void __ide_flush_dcache_range(unsigned long addr, unsigned long size)
 {
-	if (cpu_has_dc_aliases) {
+	if (cpu_has_dc_aliases || !cpu_has_ic_fills_f_dc) {
 		unsigned long end = addr + size;
 
 		while (addr < end) {

arch/mips/include/asm/mach-jazz/floppy.h

@@ -9,7 +9,6 @@
 #define __ASM_MACH_JAZZ_FLOPPY_H
 
 #include <linux/delay.h>
-#include <linux/init.h>
 #include <linux/linkage.h>
 #include <linux/types.h>
 #include <linux/mm.h>

arch/mips/include/asm/mach-jz4740/platform.h

@@ -21,6 +21,7 @@
 
 extern struct platform_device jz4740_usb_ohci_device;
 extern struct platform_device jz4740_udc_device;
+extern struct platform_device jz4740_udc_xceiv_device;
 extern struct platform_device jz4740_mmc_device;
 extern struct platform_device jz4740_rtc_device;
 extern struct platform_device jz4740_i2c_device;

arch/mips/include/asm/mach-netlogic/irq.h

@@ -9,7 +9,8 @@
 #define __ASM_NETLOGIC_IRQ_H
 
 #include <asm/mach-netlogic/multi-node.h>
-#define NR_IRQS			(64 * NLM_NR_NODES)
+#define NLM_IRQS_PER_NODE	1024
+#define NR_IRQS			(NLM_IRQS_PER_NODE * NLM_NR_NODES)
 
 #define MIPS_CPU_IRQ_BASE	0
 

arch/mips/include/asm/mach-netlogic/multi-node.h

@@ -47,8 +47,37 @@
 #endif
 #endif
 
-#define NLM_CORES_PER_NODE	8
 #define NLM_THREADS_PER_CORE	4
-#define NLM_CPUS_PER_NODE	(NLM_CORES_PER_NODE * NLM_THREADS_PER_CORE)
+#ifdef CONFIG_CPU_XLR
+#define nlm_cores_per_node()	8
+#else
+extern unsigned int xlp_cores_per_node;
+#define nlm_cores_per_node()	xlp_cores_per_node
+#endif
+
+#define nlm_threads_per_node()	(nlm_cores_per_node() * NLM_THREADS_PER_CORE)
+#define nlm_cpuid_to_node(c)	((c) / nlm_threads_per_node())
+
+struct nlm_soc_info {
+	unsigned long	coremask;	/* cores enabled on the soc */
+	unsigned long	ebase;		/* not used now */
+	uint64_t	irqmask;	/* EIMR for the node */
+	uint64_t	sysbase;	/* only for XLP - sys block base */
+	uint64_t	picbase;	/* PIC block base */
+	spinlock_t	piclock;	/* lock for PIC access */
+	cpumask_t	cpumask;	/* logical cpu mask for node */
+	unsigned int	socbus;
+};
+
+extern struct nlm_soc_info nlm_nodes[NLM_NR_NODES];
+#define nlm_get_node(i)		(&nlm_nodes[i])
+#define nlm_node_present(n)	((n) >= 0 && (n) < NLM_NR_NODES && \
+					nlm_get_node(n)->coremask != 0)
+#ifdef CONFIG_CPU_XLR
+#define nlm_current_node()	(&nlm_nodes[0])
+#else
+#define nlm_current_node()	(&nlm_nodes[nlm_nodeid()])
+#endif
+void nlm_node_init(int node);
 
 #endif

arch/mips/include/asm/mach-netlogic/topology.h

@@ -0,0 +1,20 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2013 Broadcom Corporation
+ */
+#ifndef _ASM_MACH_NETLOGIC_TOPOLOGY_H
+#define _ASM_MACH_NETLOGIC_TOPOLOGY_H
+
+#include <asm/mach-netlogic/multi-node.h>
+
+#define topology_physical_package_id(cpu)	cpu_to_node(cpu)
+#define topology_core_id(cpu)	(cpu_logical_map(cpu) / NLM_THREADS_PER_CORE)
+#define topology_thread_cpumask(cpu)		(&cpu_sibling_map[cpu])
+#define topology_core_cpumask(cpu)	cpumask_of_node(cpu_to_node(cpu))
+
+#include <asm-generic/topology.h>
+
+#endif /* _ASM_MACH_NETLOGIC_TOPOLOGY_H */

arch/mips/include/asm/mips-boards/piix4.h

@@ -26,6 +26,10 @@
 #define   PIIX4_FUNC0_PIRQRC_IRQ_ROUTING_DISABLE	(1 << 7)
 #define   PIIX4_FUNC0_PIRQRC_IRQ_ROUTING_MASK		0xf
 #define   PIIX4_FUNC0_PIRQRC_IRQ_ROUTING_MAX		16
+/* SERIRQ Control */
+#define PIIX4_FUNC0_SERIRQC			0x64
+#define   PIIX4_FUNC0_SERIRQC_EN			(1 << 7)
+#define   PIIX4_FUNC0_SERIRQC_CONT			(1 << 6)
 /* Top Of Memory */
 #define PIIX4_FUNC0_TOM				0x69
 #define   PIIX4_FUNC0_TOM_TOP_OF_MEMORY_MASK		0xf0
@@ -34,6 +38,9 @@
 #define   PIIX4_FUNC0_DLC_USBPR_EN			(1 << 2)
 #define   PIIX4_FUNC0_DLC_PASSIVE_RELEASE_EN		(1 << 1)
 #define   PIIX4_FUNC0_DLC_DELAYED_TRANSACTION_EN	(1 << 0)
+/* General Configuration */
+#define PIIX4_FUNC0_GENCFG			0xb0
+#define   PIIX4_FUNC0_GENCFG_SERIRQ			(1 << 16)
 
 /* IDE Timing */
 #define PIIX4_FUNC1_IDETIM_PRIMARY_LO		0x40

arch/mips/include/asm/mipsregs.h

@@ -14,6 +14,7 @@
 #define _ASM_MIPSREGS_H
 
 #include <linux/linkage.h>
+#include <linux/types.h>
 #include <asm/hazards.h>
 #include <asm/war.h>
 
@@ -573,7 +574,9 @@
 #define MIPS_CONF1_IA		(_ULCAST_(7) << 16)
 #define MIPS_CONF1_IL		(_ULCAST_(7) << 19)
 #define MIPS_CONF1_IS		(_ULCAST_(7) << 22)
-#define MIPS_CONF1_TLBS		(_ULCAST_(63)<< 25)
+#define MIPS_CONF1_TLBS_SHIFT   (25)
+#define MIPS_CONF1_TLBS_SIZE    (6)
+#define MIPS_CONF1_TLBS         (_ULCAST_(63) << MIPS_CONF1_TLBS_SHIFT)
 
 #define MIPS_CONF2_SA		(_ULCAST_(15)<<	 0)
 #define MIPS_CONF2_SL		(_ULCAST_(15)<<	 4)
@@ -587,21 +590,53 @@
 #define MIPS_CONF3_TL		(_ULCAST_(1) <<	 0)
 #define MIPS_CONF3_SM		(_ULCAST_(1) <<	 1)
 #define MIPS_CONF3_MT		(_ULCAST_(1) <<	 2)
+#define MIPS_CONF3_CDMM		(_ULCAST_(1) <<	 3)
 #define MIPS_CONF3_SP		(_ULCAST_(1) <<	 4)
 #define MIPS_CONF3_VINT		(_ULCAST_(1) <<	 5)
 #define MIPS_CONF3_VEIC		(_ULCAST_(1) <<	 6)
 #define MIPS_CONF3_LPA		(_ULCAST_(1) <<	 7)
+#define MIPS_CONF3_ITL		(_ULCAST_(1) <<	 8)
+#define MIPS_CONF3_CTXTC	(_ULCAST_(1) <<	 9)
 #define MIPS_CONF3_DSP		(_ULCAST_(1) << 10)
 #define MIPS_CONF3_DSP2P	(_ULCAST_(1) << 11)
 #define MIPS_CONF3_RXI		(_ULCAST_(1) << 12)
 #define MIPS_CONF3_ULRI		(_ULCAST_(1) << 13)
 #define MIPS_CONF3_ISA		(_ULCAST_(3) << 14)
 #define MIPS_CONF3_ISA_OE	(_ULCAST_(1) << 16)
+#define MIPS_CONF3_MCU		(_ULCAST_(1) << 17)
+#define MIPS_CONF3_MMAR		(_ULCAST_(7) << 18)
+#define MIPS_CONF3_IPLW		(_ULCAST_(3) << 21)
 #define MIPS_CONF3_VZ		(_ULCAST_(1) << 23)
-
+#define MIPS_CONF3_PW		(_ULCAST_(1) << 24)
+#define MIPS_CONF3_SC		(_ULCAST_(1) << 25)
+#define MIPS_CONF3_BI		(_ULCAST_(1) << 26)
+#define MIPS_CONF3_BP		(_ULCAST_(1) << 27)
+#define MIPS_CONF3_MSA		(_ULCAST_(1) << 28)
+#define MIPS_CONF3_CMGCR	(_ULCAST_(1) << 29)
+#define MIPS_CONF3_BPG		(_ULCAST_(1) << 30)
+
+#define MIPS_CONF4_MMUSIZEEXT_SHIFT	(0)
 #define MIPS_CONF4_MMUSIZEEXT	(_ULCAST_(255) << 0)
+#define MIPS_CONF4_FTLBSETS_SHIFT	(0)
+#define MIPS_CONF4_FTLBSETS_SHIFT	(0)
+#define MIPS_CONF4_FTLBSETS	(_ULCAST_(15) << MIPS_CONF4_FTLBSETS_SHIFT)
+#define MIPS_CONF4_FTLBWAYS_SHIFT	(4)
+#define MIPS_CONF4_FTLBWAYS	(_ULCAST_(15) << MIPS_CONF4_FTLBWAYS_SHIFT)
+#define MIPS_CONF4_FTLBPAGESIZE_SHIFT	(8)
+/* bits 10:8 in FTLB-only configurations */
+#define MIPS_CONF4_FTLBPAGESIZE (_ULCAST_(7) << MIPS_CONF4_FTLBPAGESIZE_SHIFT)
+/* bits 12:8 in VTLB-FTLB only configurations */
+#define MIPS_CONF4_VFTLBPAGESIZE (_ULCAST_(31) << MIPS_CONF4_FTLBPAGESIZE_SHIFT)
 #define MIPS_CONF4_MMUEXTDEF	(_ULCAST_(3) << 14)
 #define MIPS_CONF4_MMUEXTDEF_MMUSIZEEXT (_ULCAST_(1) << 14)
+#define MIPS_CONF4_MMUEXTDEF_FTLBSIZEEXT	(_ULCAST_(2) << 14)
+#define MIPS_CONF4_MMUEXTDEF_VTLBSIZEEXT	(_ULCAST_(3) << 14)
+#define MIPS_CONF4_KSCREXIST	(_ULCAST_(255) << 16)
+#define MIPS_CONF4_VTLBSIZEEXT_SHIFT	(24)
+#define MIPS_CONF4_VTLBSIZEEXT	(_ULCAST_(15) << MIPS_CONF4_VTLBSIZEEXT_SHIFT)
+#define MIPS_CONF4_AE		(_ULCAST_(1) << 28)
+#define MIPS_CONF4_IE		(_ULCAST_(3) << 29)
+#define MIPS_CONF4_TLBINV	(_ULCAST_(2) << 29)
 
 #define MIPS_CONF5_NF		(_ULCAST_(1) << 0)
 #define MIPS_CONF5_UFR		(_ULCAST_(1) << 2)
@@ -611,11 +646,15 @@
 #define MIPS_CONF5_K		(_ULCAST_(1) << 30)
 
 #define MIPS_CONF6_SYND		(_ULCAST_(1) << 13)
+/* proAptiv FTLB on/off bit */
+#define MIPS_CONF6_FTLBEN	(_ULCAST_(1) << 15)
 
 #define MIPS_CONF7_WII		(_ULCAST_(1) << 31)
 
 #define MIPS_CONF7_RPS		(_ULCAST_(1) << 2)
 
+/*  EntryHI bit definition */
+#define MIPS_ENTRYHI_EHINV	(_ULCAST_(1) << 10)
 
 /*
  * Bits in the MIPS32/64 coprocessor 1 (FPU) revision register.
@@ -628,6 +667,26 @@
 #define MIPS_FPIR_L		(_ULCAST_(1) << 21)
 #define MIPS_FPIR_F64		(_ULCAST_(1) << 22)
 
+/*
+ * Bits in the MIPS32 Memory Segmentation registers.
+ */
+#define MIPS_SEGCFG_PA_SHIFT	9
+#define MIPS_SEGCFG_PA		(_ULCAST_(127) << MIPS_SEGCFG_PA_SHIFT)
+#define MIPS_SEGCFG_AM_SHIFT	4
+#define MIPS_SEGCFG_AM		(_ULCAST_(7) << MIPS_SEGCFG_AM_SHIFT)
+#define MIPS_SEGCFG_EU_SHIFT	3
+#define MIPS_SEGCFG_EU		(_ULCAST_(1) << MIPS_SEGCFG_EU_SHIFT)
+#define MIPS_SEGCFG_C_SHIFT	0
+#define MIPS_SEGCFG_C		(_ULCAST_(7) << MIPS_SEGCFG_C_SHIFT)
+
+#define MIPS_SEGCFG_UUSK	_ULCAST_(7)
+#define MIPS_SEGCFG_USK		_ULCAST_(5)
+#define MIPS_SEGCFG_MUSUK	_ULCAST_(4)
+#define MIPS_SEGCFG_MUSK	_ULCAST_(3)
+#define MIPS_SEGCFG_MSK		_ULCAST_(2)
+#define MIPS_SEGCFG_MK		_ULCAST_(1)
+#define MIPS_SEGCFG_UK		_ULCAST_(0)
+
 #ifndef __ASSEMBLY__
 
 /*
@@ -648,6 +707,19 @@ static inline int mm_insn_16bit(u16 insn)
 	return (opcode >= 1 && opcode <= 3) ? 1 : 0;
 }
 
+/*
+ * TLB Invalidate Flush
+ */
+static inline void tlbinvf(void)
+{
+	__asm__ __volatile__(
+		".set push\n\t"
+		".set noreorder\n\t"
+		".word 0x42000004\n\t" /* tlbinvf */
+		".set pop");
+}
+
+
 /*
  * Functions to access the R10000 performance counters.	 These are basically
  * mfc0 and mtc0 instructions from and to coprocessor register with a 5-bit
@@ -1102,6 +1174,15 @@ do {									\
 #define read_c0_ebase()		__read_32bit_c0_register($15, 1)
 #define write_c0_ebase(val)	__write_32bit_c0_register($15, 1, val)
 
+/* MIPSR3 */
+#define read_c0_segctl0()	__read_32bit_c0_register($5, 2)
+#define write_c0_segctl0(val)	__write_32bit_c0_register($5, 2, val)
+
+#define read_c0_segctl1()	__read_32bit_c0_register($5, 3)
+#define write_c0_segctl1(val)	__write_32bit_c0_register($5, 3, val)
+
+#define read_c0_segctl2()	__read_32bit_c0_register($5, 4)
+#define write_c0_segctl2(val)	__write_32bit_c0_register($5, 4, val)
 
 /* Cavium OCTEON (cnMIPS) */
 #define read_c0_cvmcount()	__read_ulong_c0_register($9, 6)

arch/mips/include/asm/netlogic/common.h

@@ -84,7 +84,6 @@ nlm_set_nmi_handler(void *handler)
  */
 void nlm_init_boot_cpu(void);
 unsigned int nlm_get_cpu_frequency(void);
-void nlm_node_init(int node);
 extern struct plat_smp_ops nlm_smp_ops;
 extern char nlm_reset_entry[], nlm_reset_entry_end[];
 
@@ -94,26 +93,16 @@ extern struct dma_map_ops nlm_swiotlb_dma_ops;
 extern unsigned int nlm_threads_per_core;
 extern cpumask_t nlm_cpumask;
 
-struct nlm_soc_info {
-	unsigned long coremask; /* cores enabled on the soc */
-	unsigned long ebase;
-	uint64_t irqmask;
-	uint64_t sysbase;	/* only for XLP */
-	uint64_t picbase;
-	spinlock_t piclock;
-};
-
-#define nlm_get_node(i)		(&nlm_nodes[i])
-#ifdef CONFIG_CPU_XLR
-#define nlm_current_node()	(&nlm_nodes[0])
-#else
-#define nlm_current_node()	(&nlm_nodes[nlm_nodeid()])
-#endif
-
 struct irq_data;
 uint64_t nlm_pci_irqmask(int node);
+void nlm_setup_pic_irq(int node, int picirq, int irq, int irt);
 void nlm_set_pic_extra_ack(int node, int irq,  void (*xack)(struct irq_data *));
 
+#ifdef CONFIG_PCI_MSI
+void nlm_dispatch_msi(int node, int lirq);
+void nlm_dispatch_msix(int node, int msixirq);
+#endif
+
 /*
  * The NR_IRQs is divided between nodes, each of them has a separate irq space
  */
@@ -122,7 +111,6 @@ static inline int nlm_irq_to_xirq(int node, int irq)
 	return node * NR_IRQS / NLM_NR_NODES + irq;
 }
 
-extern struct nlm_soc_info nlm_nodes[NLM_NR_NODES];
 extern int nlm_cpu_ready[];
 #endif
 #endif /* _NETLOGIC_COMMON_H_ */

arch/mips/include/asm/netlogic/mips-extns.h

@@ -146,7 +146,12 @@ static inline int hard_smp_processor_id(void)
 
 static inline int nlm_nodeid(void)
 {
-	return (__read_32bit_c0_register($15, 1) >> 5) & 0x3;
+	uint32_t prid = read_c0_prid();
+
+	if ((prid & 0xff00) == PRID_IMP_NETLOGIC_XLP9XX)
+		return (__read_32bit_c0_register($15, 1) >> 7) & 0x7;
+	else
+		return (__read_32bit_c0_register($15, 1) >> 5) & 0x3;
 }
 
 static inline unsigned int nlm_core_id(void)

arch/mips/include/asm/netlogic/xlp-hal/bridge.h

@@ -69,44 +69,9 @@
 #define BRIDGE_FLASH_LIMIT3		0x13
 
 #define BRIDGE_DRAM_BAR(i)		(0x14 + (i))
-#define BRIDGE_DRAM_BAR0		0x14
-#define BRIDGE_DRAM_BAR1		0x15
-#define BRIDGE_DRAM_BAR2		0x16
-#define BRIDGE_DRAM_BAR3		0x17
-#define BRIDGE_DRAM_BAR4		0x18
-#define BRIDGE_DRAM_BAR5		0x19
-#define BRIDGE_DRAM_BAR6		0x1a
-#define BRIDGE_DRAM_BAR7		0x1b
-
 #define BRIDGE_DRAM_LIMIT(i)		(0x1c + (i))
-#define BRIDGE_DRAM_LIMIT0		0x1c
-#define BRIDGE_DRAM_LIMIT1		0x1d
-#define BRIDGE_DRAM_LIMIT2		0x1e
-#define BRIDGE_DRAM_LIMIT3		0x1f
-#define BRIDGE_DRAM_LIMIT4		0x20
-#define BRIDGE_DRAM_LIMIT5		0x21
-#define BRIDGE_DRAM_LIMIT6		0x22
-#define BRIDGE_DRAM_LIMIT7		0x23
-
 #define BRIDGE_DRAM_NODE_TRANSLN(i)	(0x24 + (i))
-#define BRIDGE_DRAM_NODE_TRANSLN0	0x24
-#define BRIDGE_DRAM_NODE_TRANSLN1	0x25
-#define BRIDGE_DRAM_NODE_TRANSLN2	0x26
-#define BRIDGE_DRAM_NODE_TRANSLN3	0x27
-#define BRIDGE_DRAM_NODE_TRANSLN4	0x28
-#define BRIDGE_DRAM_NODE_TRANSLN5	0x29
-#define BRIDGE_DRAM_NODE_TRANSLN6	0x2a
-#define BRIDGE_DRAM_NODE_TRANSLN7	0x2b
-
 #define BRIDGE_DRAM_CHNL_TRANSLN(i)	(0x2c + (i))
-#define BRIDGE_DRAM_CHNL_TRANSLN0	0x2c
-#define BRIDGE_DRAM_CHNL_TRANSLN1	0x2d
-#define BRIDGE_DRAM_CHNL_TRANSLN2	0x2e
-#define BRIDGE_DRAM_CHNL_TRANSLN3	0x2f
-#define BRIDGE_DRAM_CHNL_TRANSLN4	0x30
-#define BRIDGE_DRAM_CHNL_TRANSLN5	0x31
-#define BRIDGE_DRAM_CHNL_TRANSLN6	0x32
-#define BRIDGE_DRAM_CHNL_TRANSLN7	0x33
 
 #define BRIDGE_PCIEMEM_BASE0		0x34
 #define BRIDGE_PCIEMEM_BASE1		0x35
@@ -178,12 +143,42 @@
 #define BRIDGE_GIO_WEIGHT		0x2cb
 #define BRIDGE_FLASH_WEIGHT		0x2cc
 
+/* FIXME verify */
+#define BRIDGE_9XX_FLASH_BAR(i)		(0x11 + (i))
+#define BRIDGE_9XX_FLASH_BAR_LIMIT(i)	(0x15 + (i))
+
+#define BRIDGE_9XX_DRAM_BAR(i)		(0x19 + (i))
+#define BRIDGE_9XX_DRAM_LIMIT(i)	(0x29 + (i))
+#define BRIDGE_9XX_DRAM_NODE_TRANSLN(i)	(0x39 + (i))
+#define BRIDGE_9XX_DRAM_CHNL_TRANSLN(i)	(0x49 + (i))
+
+#define BRIDGE_9XX_ADDRESS_ERROR0	0x9d
+#define BRIDGE_9XX_ADDRESS_ERROR1	0x9e
+#define BRIDGE_9XX_ADDRESS_ERROR2	0x9f
+
+#define BRIDGE_9XX_PCIEMEM_BASE0	0x59
+#define BRIDGE_9XX_PCIEMEM_BASE1	0x5a
+#define BRIDGE_9XX_PCIEMEM_BASE2	0x5b
+#define BRIDGE_9XX_PCIEMEM_BASE3	0x5c
+#define BRIDGE_9XX_PCIEMEM_LIMIT0	0x5d
+#define BRIDGE_9XX_PCIEMEM_LIMIT1	0x5e
+#define BRIDGE_9XX_PCIEMEM_LIMIT2	0x5f
+#define BRIDGE_9XX_PCIEMEM_LIMIT3	0x60
+#define BRIDGE_9XX_PCIEIO_BASE0		0x61
+#define BRIDGE_9XX_PCIEIO_BASE1		0x62
+#define BRIDGE_9XX_PCIEIO_BASE2		0x63
+#define BRIDGE_9XX_PCIEIO_BASE3		0x64
+#define BRIDGE_9XX_PCIEIO_LIMIT0	0x65
+#define BRIDGE_9XX_PCIEIO_LIMIT1	0x66
+#define BRIDGE_9XX_PCIEIO_LIMIT2	0x67
+#define BRIDGE_9XX_PCIEIO_LIMIT3	0x68
+
 #ifndef __ASSEMBLY__
 
 #define nlm_read_bridge_reg(b, r)	nlm_read_reg(b, r)
 #define nlm_write_bridge_reg(b, r, v)	nlm_write_reg(b, r, v)
-#define nlm_get_bridge_pcibase(node)	\
-			nlm_pcicfg_base(XLP_IO_BRIDGE_OFFSET(node))
+#define nlm_get_bridge_pcibase(node)	nlm_pcicfg_base(cpu_is_xlp9xx() ? \
+		XLP9XX_IO_BRIDGE_OFFSET(node) : XLP_IO_BRIDGE_OFFSET(node))
 #define nlm_get_bridge_regbase(node)	\
 			(nlm_get_bridge_pcibase(node) + XLP_IO_PCI_HDRSZ)
 

arch/mips/include/asm/netlogic/xlp-hal/iomap.h

@@ -48,8 +48,10 @@
 #define XLP_IO_SIZE			(64 << 20)	/* ECFG space size */
 #define XLP_IO_PCI_HDRSZ		0x100
 #define XLP_IO_DEV(node, dev)		((dev) + (node) * 8)
-#define XLP_HDR_OFFSET(node, bus, dev, fn)	(((bus) << 20) | \
-				((XLP_IO_DEV(node, dev)) << 15) | ((fn) << 12))
+#define XLP_IO_PCI_OFFSET(b, d, f)	(((b) << 20) | ((d) << 15) | ((f) << 12))
+
+#define XLP_HDR_OFFSET(node, bus, dev, fn) \
+		XLP_IO_PCI_OFFSET(bus, XLP_IO_DEV(node, dev), fn)
 
 #define XLP_IO_BRIDGE_OFFSET(node)	XLP_HDR_OFFSET(node, 0, 0, 0)
 /* coherent inter chip */
@@ -109,6 +111,36 @@
 #define XLP_IO_MMC_OFFSET(node, slot)	\
 		((XLP_IO_SD_OFFSET(node))+(slot*0x100)+XLP_IO_PCI_HDRSZ)
 
+/* Things have changed drastically in XLP 9XX */
+#define XLP9XX_HDR_OFFSET(n, d, f)	\
+			XLP_IO_PCI_OFFSET(xlp9xx_get_socbus(n), d, f)
+
+#define XLP9XX_IO_BRIDGE_OFFSET(node)	XLP_IO_PCI_OFFSET(0, 0, node)
+#define XLP9XX_IO_PIC_OFFSET(node)	XLP9XX_HDR_OFFSET(node, 2, 0)
+#define XLP9XX_IO_UART_OFFSET(node)	XLP9XX_HDR_OFFSET(node, 2, 2)
+#define XLP9XX_IO_SYS_OFFSET(node)	XLP9XX_HDR_OFFSET(node, 6, 0)
+#define XLP9XX_IO_FUSE_OFFSET(node)	XLP9XX_HDR_OFFSET(node, 6, 1)
+#define XLP9XX_IO_JTAG_OFFSET(node)	XLP9XX_HDR_OFFSET(node, 6, 4)
+
+#define XLP9XX_IO_PCIE_OFFSET(node, i)	XLP9XX_HDR_OFFSET(node, 1, i)
+#define XLP9XX_IO_PCIE0_OFFSET(node)	XLP9XX_HDR_OFFSET(node, 1, 0)
+#define XLP9XX_IO_PCIE2_OFFSET(node)	XLP9XX_HDR_OFFSET(node, 1, 2)
+#define XLP9XX_IO_PCIE3_OFFSET(node)	XLP9XX_HDR_OFFSET(node, 1, 3)
+
+/* XLP9xx USB block */
+#define XLP9XX_IO_USB_OFFSET(node, i)		XLP9XX_HDR_OFFSET(node, 4, i)
+#define XLP9XX_IO_USB_XHCI0_OFFSET(node)	XLP9XX_HDR_OFFSET(node, 4, 1)
+#define XLP9XX_IO_USB_XHCI1_OFFSET(node)	XLP9XX_HDR_OFFSET(node, 4, 2)
+
+/* XLP9XX on-chip SATA controller */
+#define XLP9XX_IO_SATA_OFFSET(node)		XLP9XX_HDR_OFFSET(node, 3, 2)
+
+#define XLP9XX_IO_NOR_OFFSET(node)		XLP9XX_HDR_OFFSET(node, 7, 0)
+#define XLP9XX_IO_NAND_OFFSET(node)		XLP9XX_HDR_OFFSET(node, 7, 1)
+#define XLP9XX_IO_SPI_OFFSET(node)		XLP9XX_HDR_OFFSET(node, 7, 2)
+/* SD flash */
+#define XLP9XX_IO_MMCSD_OFFSET(node)		XLP9XX_HDR_OFFSET(node, 7, 3)
+
 /* PCI config header register id's */
 #define XLP_PCI_CFGREG0			0x00
 #define XLP_PCI_CFGREG1			0x01
@@ -156,11 +188,23 @@
 #define PCI_DEVICE_ID_NLM_MMC		0x1018
 #define PCI_DEVICE_ID_NLM_XHCI		0x101d
 
+#define PCI_DEVICE_ID_XLP9XX_SATA	0x901A
+#define PCI_DEVICE_ID_XLP9XX_XHCI	0x901D
+
 #ifndef __ASSEMBLY__
 
 #define nlm_read_pci_reg(b, r)		nlm_read_reg(b, r)
 #define nlm_write_pci_reg(b, r, v)	nlm_write_reg(b, r, v)
 
+static inline int xlp9xx_get_socbus(int node)
+{
+	uint64_t socbridge;
+
+	if (node == 0)
+		return 1;
+	socbridge = nlm_pcicfg_base(XLP9XX_IO_BRIDGE_OFFSET(node));
+	return (nlm_read_pci_reg(socbridge, 0x6) >> 8) & 0xff;
+}
 #endif /* !__ASSEMBLY */
 
 #endif /* __NLM_HAL_IOMAP_H__ */

arch/mips/include/asm/netlogic/xlp-hal/pcibus.h

@@ -52,25 +52,48 @@
 #define PCIE_BYTE_SWAP_MEM_LIM		0x248
 #define PCIE_BYTE_SWAP_IO_BASE		0x249
 #define PCIE_BYTE_SWAP_IO_LIM		0x24A
+
+#define PCIE_BRIDGE_MSIX_ADDR_BASE	0x24F
+#define PCIE_BRIDGE_MSIX_ADDR_LIMIT	0x250
 #define PCIE_MSI_STATUS			0x25A
 #define PCIE_MSI_EN			0x25B
+#define PCIE_MSIX_STATUS		0x25D
+#define PCIE_INT_STATUS0		0x25F
+#define PCIE_INT_STATUS1		0x260
 #define PCIE_INT_EN0			0x261
+#define PCIE_INT_EN1			0x262
 
-/* PCIE_MSI_EN */
-#define PCIE_MSI_VECTOR_INT_EN		0xFFFFFFFF
+/* XLP9XX has basic changes */
+#define PCIE_9XX_BYTE_SWAP_MEM_BASE	0x25c
+#define PCIE_9XX_BYTE_SWAP_MEM_LIM	0x25d
+#define PCIE_9XX_BYTE_SWAP_IO_BASE	0x25e
+#define PCIE_9XX_BYTE_SWAP_IO_LIM	0x25f
 
-/* PCIE_INT_EN0 */
-#define PCIE_MSI_INT_EN			(1 << 9)
+/* other */
+#define PCIE_NLINKS			4
 
+/* MSI addresses */
+#define MSI_ADDR_BASE			0xfffee00000ULL
+#define MSI_ADDR_SZ			0x10000
+#define MSI_LINK_ADDR(n, l)		(MSI_ADDR_BASE + \
+				(PCIE_NLINKS * (n) + (l)) * MSI_ADDR_SZ)
+#define MSIX_ADDR_BASE			0xfffef00000ULL
+#define MSIX_LINK_ADDR(n, l)		(MSIX_ADDR_BASE + \
+				(PCIE_NLINKS * (n) + (l)) * MSI_ADDR_SZ)
 #ifndef __ASSEMBLY__
 
 #define nlm_read_pcie_reg(b, r)		nlm_read_reg(b, r)
 #define nlm_write_pcie_reg(b, r, v)	nlm_write_reg(b, r, v)
-#define nlm_get_pcie_base(node, inst)	\
-			nlm_pcicfg_base(XLP_IO_PCIE_OFFSET(node, inst))
-#define nlm_get_pcie_regbase(node, inst)	\
-			(nlm_get_pcie_base(node, inst) + XLP_IO_PCI_HDRSZ)
+#define nlm_get_pcie_base(node, inst)	nlm_pcicfg_base(cpu_is_xlp9xx() ? \
+	XLP9XX_IO_PCIE_OFFSET(node, inst) : XLP_IO_PCIE_OFFSET(node, inst))
+
+#ifdef CONFIG_PCI_MSI
+void xlp_init_node_msi_irqs(int node, int link);
+#else
+static inline void xlp_init_node_msi_irqs(int node, int link) {}
+#endif
+
+struct pci_dev *xlp_get_pcie_link(const struct pci_dev *dev);
 
-int xlp_pcie_link_irt(int link);
 #endif
 #endif /* __NLM_HAL_PCIBUS_H__ */

arch/mips/include/asm/netlogic/xlp-hal/pic.h

@@ -150,12 +150,19 @@
 #define PIC_IRT0		0x74
 #define PIC_IRT(i)		(PIC_IRT0 + ((i) * 2))
 
-#define TIMER_CYCLES_MAXVAL	0xffffffffffffffffULL
+#define PIC_9XX_PENDING_0	0x6
+#define PIC_9XX_PENDING_1	0x8
+#define PIC_9XX_PENDING_2	0xa
+#define PIC_9XX_PENDING_3	0xc
+
+#define PIC_9XX_IRT0		0x1c0
+#define PIC_9XX_IRT(i)		(PIC_9XX_IRT0 + ((i) * 2))
 
 /*
  *    IRT Map
  */
 #define PIC_NUM_IRTS		160
+#define PIC_9XX_NUM_IRTS	256
 
 #define PIC_IRT_WD_0_INDEX	0
 #define PIC_IRT_WD_1_INDEX	1
@@ -193,14 +200,9 @@
 #define PIC_IRT_PCIE_LINK_INDEX(num)	((num) + PIC_IRT_PCIE_LINK_0_INDEX)
 
 #define PIC_CLOCK_TIMER			7
-#define PIC_IRQ_BASE			8
 
 #if !defined(LOCORE) && !defined(__ASSEMBLY__)
 
-#define PIC_IRT_FIRST_IRQ		(PIC_IRQ_BASE)
-#define PIC_IRT_LAST_IRQ		63
-#define PIC_IRQ_IS_IRT(irq)		((irq) >= PIC_IRT_FIRST_IRQ)
-
 /*
  *   Misc
  */
@@ -210,30 +212,26 @@
 
 #define nlm_read_pic_reg(b, r)	nlm_read_reg64(b, r)
 #define nlm_write_pic_reg(b, r, v) nlm_write_reg64(b, r, v)
-#define nlm_get_pic_pcibase(node) nlm_pcicfg_base(XLP_IO_PIC_OFFSET(node))
+#define nlm_get_pic_pcibase(node)	nlm_pcicfg_base(cpu_is_xlp9xx() ? \
+		XLP9XX_IO_PIC_OFFSET(node) : XLP_IO_PIC_OFFSET(node))
 #define nlm_get_pic_regbase(node) (nlm_get_pic_pcibase(node) + XLP_IO_PCI_HDRSZ)
 
 /* We use PIC on node 0 as a timer */
 #define pic_timer_freq()		nlm_get_pic_frequency(0)
 
 /* IRT and h/w interrupt routines */
-static inline int
-nlm_pic_read_irt(uint64_t base, int irt_index)
-{
-	return nlm_read_pic_reg(base, PIC_IRT(irt_index));
-}
-
 static inline void
-nlm_set_irt_to_cpu(uint64_t base, int irt, int cpu)
+nlm_9xx_pic_write_irt(uint64_t base, int irt_num, int en, int nmi,
+	int sch, int vec, int dt, int db, int cpu)
 {
 	uint64_t val;
 
-	val = nlm_read_pic_reg(base, PIC_IRT(irt));
-	/* clear cpuset and mask */
-	val &= ~((0x7ull << 16) | 0xffff);
-	/* set DB, cpuset and cpumask */
-	val |= (1 << 19) | ((cpu >> 4) << 16) | (1 << (cpu & 0xf));
-	nlm_write_pic_reg(base, PIC_IRT(irt), val);
+	val = (((uint64_t)en & 0x1) << 22) | ((nmi & 0x1) << 23) |
+			((0 /*mc*/) << 20) | ((vec & 0x3f) << 24) |
+			((dt & 0x1) << 21) | (0 /*ptr*/ << 16) |
+			(cpu & 0x3ff);
+
+	nlm_write_pic_reg(base, PIC_9XX_IRT(irt_num), val);
 }
 
 static inline void
@@ -254,9 +252,13 @@ static inline void
 nlm_pic_write_irt_direct(uint64_t base, int irt_num, int en, int nmi,
 	int sch, int vec, int cpu)
 {
-	nlm_pic_write_irt(base, irt_num, en, nmi, sch, vec, 1,
-		(cpu >> 4),		/* thread group */
-		1 << (cpu & 0xf));	/* thread mask */
+	if (cpu_is_xlp9xx())
+		nlm_9xx_pic_write_irt(base, irt_num, en, nmi, sch, vec,
+							1, 0, cpu);
+	else
+		nlm_pic_write_irt(base, irt_num, en, nmi, sch, vec, 1,
+			(cpu >> 4),		/* thread group */
+			1 << (cpu & 0xf));	/* thread mask */
 }
 
 static inline uint64_t
@@ -298,8 +300,13 @@ nlm_pic_enable_irt(uint64_t base, int irt)
 {
 	uint64_t reg;
 
-	reg = nlm_read_pic_reg(base, PIC_IRT(irt));
-	nlm_write_pic_reg(base, PIC_IRT(irt), reg | (1u << 31));
+	if (cpu_is_xlp9xx()) {
+		reg = nlm_read_pic_reg(base, PIC_9XX_IRT(irt));
+		nlm_write_pic_reg(base, PIC_9XX_IRT(irt), reg | (1 << 22));
+	} else {
+		reg = nlm_read_pic_reg(base, PIC_IRT(irt));
+		nlm_write_pic_reg(base, PIC_IRT(irt), reg | (1u << 31));
+	}
 }
 
 static inline void
@@ -307,8 +314,15 @@ nlm_pic_disable_irt(uint64_t base, int irt)
 {
 	uint64_t reg;
 
-	reg = nlm_read_pic_reg(base, PIC_IRT(irt));
-	nlm_write_pic_reg(base, PIC_IRT(irt), reg & ~((uint64_t)1 << 31));
+	if (cpu_is_xlp9xx()) {
+		reg = nlm_read_pic_reg(base, PIC_9XX_IRT(irt));
+		reg &= ~((uint64_t)1 << 22);
+		nlm_write_pic_reg(base, PIC_9XX_IRT(irt), reg);
+	} else {
+		reg = nlm_read_pic_reg(base, PIC_IRT(irt));
+		reg &= ~((uint64_t)1 << 31);
+		nlm_write_pic_reg(base, PIC_IRT(irt), reg);
+	}
 }
 
 static inline void
@@ -316,8 +330,13 @@ nlm_pic_send_ipi(uint64_t base, int hwt, int irq, int nmi)
 {
 	uint64_t ipi;
 
-	ipi = ((uint64_t)nmi << 31) | (irq << 20);
-	ipi |= ((hwt >> 4) << 16) | (1 << (hwt & 0xf)); /* cpuset and mask */
+	if (cpu_is_xlp9xx())
+		ipi = (nmi << 23) | (irq << 24) |
+			(0/*mcm*/ << 20) | (0/*ptr*/ << 16) | hwt;
+	else
+		ipi = ((uint64_t)nmi << 31) | (irq << 20) |
+			((hwt >> 4) << 16) | (1 << (hwt & 0xf));
+
 	nlm_write_pic_reg(base, PIC_IPI_CTL, ipi);
 }
 

arch/mips/include/asm/netlogic/xlp-hal/sys.h

@@ -147,13 +147,29 @@
 #define SYS_SYS_PLL_MEM_REQ			0x2a3
 #define SYS_PLL_MEM_STAT			0x2a4
 
+/* Registers changed on 9XX */
+#define SYS_9XX_POWER_ON_RESET_CFG		0x00
+#define SYS_9XX_CHIP_RESET			0x01
+#define SYS_9XX_CPU_RESET			0x02
+#define SYS_9XX_CPU_NONCOHERENT_MODE		0x03
+
+/* XLP 9XX fuse block registers */
+#define FUSE_9XX_DEVCFG6			0xc6
+
 #ifndef __ASSEMBLY__
 
 #define nlm_read_sys_reg(b, r)		nlm_read_reg(b, r)
 #define nlm_write_sys_reg(b, r, v)	nlm_write_reg(b, r, v)
-#define nlm_get_sys_pcibase(node) nlm_pcicfg_base(XLP_IO_SYS_OFFSET(node))
+#define nlm_get_sys_pcibase(node)	nlm_pcicfg_base(cpu_is_xlp9xx() ? \
+		XLP9XX_IO_SYS_OFFSET(node) : XLP_IO_SYS_OFFSET(node))
 #define nlm_get_sys_regbase(node) (nlm_get_sys_pcibase(node) + XLP_IO_PCI_HDRSZ)
 
+/* XLP9XX fuse block */
+#define nlm_get_fuse_pcibase(node)	\
+			nlm_pcicfg_base(XLP9XX_IO_FUSE_OFFSET(node))
+#define nlm_get_fuse_regbase(node)	\
+			(nlm_get_fuse_pcibase(node) + XLP_IO_PCI_HDRSZ)
+
 unsigned int nlm_get_pic_frequency(int node);
 #endif
 #endif

arch/mips/include/asm/netlogic/xlp-hal/uart.h

@@ -94,7 +94,8 @@
 #define nlm_read_uart_reg(b, r)		nlm_read_reg(b, r)
 #define nlm_write_uart_reg(b, r, v)	nlm_write_reg(b, r, v)
 #define nlm_get_uart_pcibase(node, inst)	\
-		nlm_pcicfg_base(XLP_IO_UART_OFFSET(node, inst))
+	nlm_pcicfg_base(cpu_is_xlp9xx() ?  XLP9XX_IO_UART_OFFSET(node) : \
+						XLP_IO_UART_OFFSET(node, inst))
 #define nlm_get_uart_regbase(node, inst)	\
 			(nlm_get_uart_pcibase(node, inst) + XLP_IO_PCI_HDRSZ)
 

arch/mips/include/asm/netlogic/xlp-hal/xlp.h

@@ -37,10 +37,9 @@
 
 #define PIC_UART_0_IRQ			17
 #define PIC_UART_1_IRQ			18
-#define PIC_PCIE_LINK_0_IRQ		19
-#define PIC_PCIE_LINK_1_IRQ		20
-#define PIC_PCIE_LINK_2_IRQ		21
-#define PIC_PCIE_LINK_3_IRQ		22
+
+#define PIC_PCIE_LINK_LEGACY_IRQ_BASE	19
+#define PIC_PCIE_LINK_LEGACY_IRQ(i)	(19 + (i))
 
 #define PIC_EHCI_0_IRQ			23
 #define PIC_EHCI_1_IRQ			24
@@ -51,6 +50,8 @@
 #define PIC_2XX_XHCI_0_IRQ		23
 #define PIC_2XX_XHCI_1_IRQ		24
 #define PIC_2XX_XHCI_2_IRQ		25
+#define PIC_9XX_XHCI_0_IRQ		23
+#define PIC_9XX_XHCI_1_IRQ		24
 
 #define PIC_MMC_IRQ			29
 #define PIC_I2C_0_IRQ			30
@@ -58,6 +59,23 @@
 #define PIC_I2C_2_IRQ			32
 #define PIC_I2C_3_IRQ			33
 
+#define PIC_PCIE_LINK_MSI_IRQ_BASE	44	/* 44 - 47 MSI IRQ */
+#define PIC_PCIE_LINK_MSI_IRQ(i)	(44 + (i))
+
+/* MSI-X with second link-level dispatch */
+#define PIC_PCIE_MSIX_IRQ_BASE		48	/* 48 - 51 MSI-X IRQ */
+#define PIC_PCIE_MSIX_IRQ(i)		(48 + (i))
+
+#define NLM_MSIX_VEC_BASE		96	/* 96 - 127 - MSIX mapped */
+#define NLM_MSI_VEC_BASE		128	/* 128 -255 - MSI mapped */
+
+#define NLM_PIC_INDIRECT_VEC_BASE	512
+#define NLM_GPIO_VEC_BASE		768
+
+#define PIC_IRQ_BASE			8
+#define PIC_IRT_FIRST_IRQ		PIC_IRQ_BASE
+#define PIC_IRT_LAST_IRQ		63
+
 #ifndef __ASSEMBLY__
 
 /* SMP support functions */
@@ -68,6 +86,9 @@ void xlp_mmu_init(void);
 void nlm_hal_init(void);
 int xlp_get_dram_map(int n, uint64_t *dram_map);
 
+struct pci_dev;
+int xlp_socdev_to_node(const struct pci_dev *dev);
+
 /* Device tree related */
 void xlp_early_init_devtree(void);
 void *xlp_dt_init(void *fdtp);
@@ -76,8 +97,15 @@ static inline int cpu_is_xlpii(void)
 {
 	int chip = read_c0_prid() & 0xff00;
 
-	return chip == PRID_IMP_NETLOGIC_XLP2XX;
+	return chip == PRID_IMP_NETLOGIC_XLP2XX ||
+		chip == PRID_IMP_NETLOGIC_XLP9XX;
 }
 
+static inline int cpu_is_xlp9xx(void)
+{
+	int chip = read_c0_prid() & 0xff00;
+
+	return chip == PRID_IMP_NETLOGIC_XLP9XX;
+}
 #endif /* !__ASSEMBLY__ */
 #endif /* _ASM_NLM_XLP_H */

arch/mips/include/asm/netlogic/xlr/xlr.h

@@ -35,11 +35,6 @@
 #ifndef _ASM_NLM_XLR_H
 #define _ASM_NLM_XLR_H
 
-/* Platform UART functions */
-struct uart_port;
-unsigned int nlm_xlr_uart_in(struct uart_port *, int);
-void nlm_xlr_uart_out(struct uart_port *, int, int);
-
 /* SMP helpers */
 void xlr_wakeup_secondary_cpus(void);
 

arch/mips/include/asm/octeon/cvmx-helper-board.h

@@ -36,6 +36,13 @@
 
 #include <asm/octeon/cvmx-helper.h>
 
+enum cvmx_helper_board_usb_clock_types {
+	USB_CLOCK_TYPE_REF_12,
+	USB_CLOCK_TYPE_REF_24,
+	USB_CLOCK_TYPE_REF_48,
+	USB_CLOCK_TYPE_CRYSTAL_12,
+};
+
 typedef enum {
 	set_phy_link_flags_autoneg = 0x1,
 	set_phy_link_flags_flow_control_dont_touch = 0x0 << 1,
@@ -154,4 +161,6 @@ extern int __cvmx_helper_board_interface_probe(int interface,
  */
 extern int __cvmx_helper_board_hardware_enable(int interface);
 
+enum cvmx_helper_board_usb_clock_types __cvmx_helper_board_usb_get_clock_type(void);
+
 #endif /* __CVMX_HELPER_BOARD_H__ */

arch/mips/include/asm/page.h

@@ -11,6 +11,8 @@
 
 #include <spaces.h>
 #include <linux/const.h>
+#include <linux/kernel.h>
+#include <asm/mipsregs.h>
 
 /*
  * PAGE_SHIFT determines the page size
@@ -33,6 +35,29 @@
 #define PAGE_SIZE	(_AC(1,UL) << PAGE_SHIFT)
 #define PAGE_MASK	(~((1 << PAGE_SHIFT) - 1))
 
+/*
+ * This is used for calculating the real page sizes
+ * for FTLB or VTLB + FTLB confugrations.
+ */
+static inline unsigned int page_size_ftlb(unsigned int mmuextdef)
+{
+	switch (mmuextdef) {
+	case MIPS_CONF4_MMUEXTDEF_FTLBSIZEEXT:
+		if (PAGE_SIZE == (1 << 30))
+			return 5;
+		if (PAGE_SIZE == (1llu << 32))
+			return 6;
+		if (PAGE_SIZE > (256 << 10))
+			return 7; /* reserved */
+			/* fall through */
+	case MIPS_CONF4_MMUEXTDEF_VTLBSIZEEXT:
+		return (PAGE_SHIFT - 10) / 2;
+	default:
+		panic("Invalid FTLB configuration with Conf4_mmuextdef=%d value\n",
+		      mmuextdef >> 14);
+	}
+}
+
 #ifdef CONFIG_MIPS_HUGE_TLB_SUPPORT
 #define HPAGE_SHIFT	(PAGE_SHIFT + PAGE_SHIFT - 3)
 #define HPAGE_SIZE	(_AC(1,UL) << HPAGE_SHIFT)

arch/mips/include/asm/rtlx.h

@@ -1,13 +1,18 @@
 /*
- * Copyright (C) 2004, 2005 MIPS Technologies, Inc.  All rights reserved.
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
  *
+ * Copyright (C) 2004, 2005 MIPS Technologies, Inc.  All rights reserved.
+ * Copyright (C) 2013 Imagination Technologies Ltd.
  */
-
 #ifndef __ASM_RTLX_H_
 #define __ASM_RTLX_H_
 
 #include <irq.h>
 
+#define RTLX_MODULE_NAME "rtlx"
+
 #define LX_NODE_BASE 10
 
 #define MIPS_CPU_RTLX_IRQ 0
@@ -15,18 +20,31 @@
 #define RTLX_VERSION 2
 #define RTLX_xID 0x12345600
 #define RTLX_ID (RTLX_xID | RTLX_VERSION)
+#define RTLX_BUFFER_SIZE 2048
 #define RTLX_CHANNELS 8
 
 #define RTLX_CHANNEL_STDIO	0
 #define RTLX_CHANNEL_DBG	1
 #define RTLX_CHANNEL_SYSIO	2
 
-extern int rtlx_open(int index, int can_sleep);
-extern int rtlx_release(int index);
-extern ssize_t rtlx_read(int index, void __user *buff, size_t count);
-extern ssize_t rtlx_write(int index, const void __user *buffer, size_t count);
-extern unsigned int rtlx_read_poll(int index, int can_sleep);
-extern unsigned int rtlx_write_poll(int index);
+void rtlx_starting(int vpe);
+void rtlx_stopping(int vpe);
+
+int rtlx_open(int index, int can_sleep);
+int rtlx_release(int index);
+ssize_t rtlx_read(int index, void __user *buff, size_t count);
+ssize_t rtlx_write(int index, const void __user *buffer, size_t count);
+unsigned int rtlx_read_poll(int index, int can_sleep);
+unsigned int rtlx_write_poll(int index);
+
+int __init rtlx_module_init(void);
+void __exit rtlx_module_exit(void);
+
+void _interrupt_sp(void);
+
+extern struct vpe_notifications rtlx_notify;
+extern const struct file_operations rtlx_fops;
+extern void (*aprp_hook)(void);
 
 enum rtlx_state {
 	RTLX_STATE_UNUSED = 0,
@@ -35,10 +53,15 @@ enum rtlx_state {
 	RTLX_STATE_OPENED
 };
 
-#define RTLX_BUFFER_SIZE 2048
+extern struct chan_waitqueues {
+	wait_queue_head_t rt_queue;
+	wait_queue_head_t lx_queue;
+	atomic_t in_open;
+	struct mutex mutex;
+} channel_wqs[RTLX_CHANNELS];
 
 /* each channel supports read and write.
-   linux (vpe0) reads lx_buffer	 and writes rt_buffer
+   linux (vpe0) reads lx_buffer and writes rt_buffer
    SP (vpe1) reads rt_buffer and writes lx_buffer
 */
 struct rtlx_channel {
@@ -55,11 +78,11 @@ struct rtlx_channel {
 	char *lx_buffer;
 };
 
-struct rtlx_info {
+extern struct rtlx_info {
 	unsigned long id;
 	enum rtlx_state state;
+	int ap_int_pending;	/* Status of 0 or 1 for CONFIG_MIPS_CMP only */
 
 	struct rtlx_channel channel[RTLX_CHANNELS];
-};
-
+} *rtlx;
 #endif /* __ASM_RTLX_H_ */

arch/mips/include/asm/switch_to.h

@@ -19,11 +19,19 @@
 
 struct task_struct;
 
-/*
- * switch_to(n) should switch tasks to task nr n, first
- * checking that n isn't the current task, in which case it does nothing.
+/**
+ * resume - resume execution of a task
+ * @prev:	The task previously executed.
+ * @next:	The task to begin executing.
+ * @next_ti:	task_thread_info(next).
+ * @usedfpu:	Non-zero if prev's FP context should be saved.
+ *
+ * This function is used whilst scheduling to save the context of prev & load
+ * the context of next. Returns prev.
  */
-extern asmlinkage void *resume(void *last, void *next, void *next_ti, u32 __usedfpu);
+extern asmlinkage struct task_struct *resume(struct task_struct *prev,
+		struct task_struct *next, struct thread_info *next_ti,
+		u32 usedfpu);
 
 extern unsigned int ll_bit;
 extern struct task_struct *ll_task;