Merge tag 'mmc-updates-for-3.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc

Pull MMC updates from Chris Ball:
 "MMC highlights for 3.14:

  Core:
   - Avoid get_cd() on cards marked nonremovable

  Drivers:
   - arasan: New driver for controllers found in e.g. Xilinx Zynq SoC
   - dwmmc: Support Hisilicon K3 SoC controllers
   - esdhc-imx: Support for HS200 mode, DDR modes on MX6, runtime PM
   - sdhci-pci: Support O2Micro/BayHubTech controllers used in laptops
     like Lenovo ThinkPad W540, Dell Latitude E5440, Dell Latitude E6540
   - tegra: Support Tegra124 SoCs"

* tag 'mmc-updates-for-3.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (55 commits)
  mmc: sdhci-pci: Fix possibility of chip->fixes being null
  mmc: sdhci-pci: Fix BYT sd card getting stuck in runtime suspend
  mmc: sdhci: Allow for long command timeouts
  mmc: sdio: add a quirk for broken SDIO_CCCR_INTx polling
  mmc: sdhci: fix lockdep error in tuning routine
  mmc: dw_mmc: k3: remove clk_table
  mmc: dw_mmc: fix dw_mci_get_cd
  mmc: dw_mmc: fix sparse non static symbol warning
  mmc: sdhci-esdhc-imx: fix warning during module remove function
  mmc: sdhci-esdhc-imx: fix access hardirq-unsafe lock in atomic context
  mmc: core: sd: implement proper support for sd3.0 au sizes
  mmc: atmel-mci: add vmmc-supply support
  mmc: sdhci-pci: add broken HS200 quirk for Intel Merrifield
  mmc: sdhci: add quirk for broken HS200 support
  mmc: arasan: Add driver for Arasan SDHCI
  mmc: dw_mmc: add dw_mmc-k3 for k3 platform
  mmc: dw_mmc: use slot-gpio to handle cd pin
  mmc: sdhci-pci: add support of O2Micro/BayHubTech SD hosts
  mmc: sdhci-pci: break out definitions to header file
  mmc: tmio: fixup compile error
  ...

Conflicts:
	MAINTAINERS

Documentation/devicetree/bindings/mmc/arasan,sdhci.txt

@@ -0,0 +1,27 @@
+Device Tree Bindings for the Arasan SDHCI Controller
+
+  The bindings follow the mmc[1], clock[2] and interrupt[3] bindings. Only
+  deviations are documented here.
+
+  [1] Documentation/devicetree/bindings/mmc/mmc.txt
+  [2] Documentation/devicetree/bindings/clock/clock-bindings.txt
+  [3] Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
+
+Required Properties:
+  - compatible: Compatibility string. Must be 'arasan,sdhci-8.9a'
+  - reg: From mmc bindings: Register location and length.
+  - clocks: From clock bindings: Handles to clock inputs.
+  - clock-names: From clock bindings: Tuple including "clk_xin" and "clk_ahb"
+  - interrupts: Interrupt specifier
+  - interrupt-parent: Phandle for the interrupt controller that services
+		      interrupts for this device.
+
+Example:
+	sdhci@e0100000 {
+		compatible = "arasan,sdhci-8.9a";
+		reg = <0xe0100000 0x1000>;
+		clock-names = "clk_xin", "clk_ahb";
+		clocks = <&clkc 21>, <&clkc 32>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 24 4>;
+	} ;

Documentation/devicetree/bindings/mmc/k3-dw-mshc.txt

@@ -0,0 +1,46 @@
+* Hisilicon specific extensions to the Synopsys Designware Mobile
+  Storage Host Controller
+
+Read synopsys-dw-mshc.txt for more details
+
+The Synopsys designware mobile storage host controller is used to interface
+a SoC with storage medium such as eMMC or SD/MMC cards. This file documents
+differences between the core Synopsys dw mshc controller properties described
+by synopsys-dw-mshc.txt and the properties used by the Hisilicon specific
+extensions to the Synopsys Designware Mobile Storage Host Controller.
+
+Required Properties:
+
+* compatible: should be one of the following.
+  - "hisilicon,hi4511-dw-mshc": for controllers with hi4511 specific extentions.
+
+Example:
+
+	/* for Hi3620 */
+
+	/* SoC portion */
+	dwmmc_0: dwmmc0@fcd03000 {
+		compatible = "hisilicon,hi4511-dw-mshc";
+		reg = <0xfcd03000 0x1000>;
+		interrupts = <0 16 4>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&mmc_clock HI3620_SD_CIUCLK>, <&clock HI3620_DDRC_PER_CLK>;
+		clock-names = "ciu", "biu";
+	};
+
+	/* Board portion */
+	dwmmc0@fcd03000 {
+		num-slots = <1>;
+		vmmc-supply = <&ldo12>;
+		fifo-depth = <0x100>;
+		supports-highspeed;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sd_pmx_pins &sd_cfg_func1 &sd_cfg_func2>;
+		slot@0 {
+			reg = <0>;
+			bus-width = <4>;
+			disable-wp;
+			cd-gpios = <&gpio10 3 0>;
+		};
+	};

MAINTAINERS

@@ -1409,6 +1409,7 @@ F:	drivers/cpuidle/cpuidle-zynq.c
 N:	zynq
 N:	xilinx
 F:	drivers/clocksource/cadence_ttc_timer.c
+F:	drivers/mmc/host/sdhci-of-arasan.c
 
 ARM SMMU DRIVER
 M:	Will Deacon <will.deacon@arm.com>
@@ -5782,7 +5783,7 @@ F:	drivers/mfd/
 F:	include/linux/mfd/
 
 MULTIMEDIA CARD (MMC), SECURE DIGITAL (SD) AND SDIO SUBSYSTEM
-M:	Chris Ball <cjb@laptop.org>
+M:	Chris Ball <chris@printf.net>
 L:	linux-mmc@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc.git
 S:	Maintained
@@ -7609,7 +7610,7 @@ S:	Maintained
 F:	drivers/mmc/host/sdricoh_cs.c
 
 SECURE DIGITAL HOST CONTROLLER INTERFACE (SDHCI) DRIVER
-M:	Chris Ball <cjb@laptop.org>
+M:	Chris Ball <chris@printf.net>
 L:	linux-mmc@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc.git
 S:	Maintained
@@ -8768,7 +8769,6 @@ F:	include/linux/toshiba.h
 F:	include/uapi/linux/toshiba.h
 
 TMIO MMC DRIVER
-M:	Guennadi Liakhovetski <g.liakhovetski@gmx.de>
 M:	Ian Molton <ian@mnementh.co.uk>
 L:	linux-mmc@vger.kernel.org
 S:	Maintained

drivers/mmc/card/block.c

@@ -1959,6 +1959,7 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req)
 	struct mmc_card *card = md->queue.card;
 	struct mmc_host *host = card->host;
 	unsigned long flags;
+	unsigned int cmd_flags = req ? req->cmd_flags : 0;
 
 	if (req && !mq->mqrq_prev->req)
 		/* claim host only for the first request */
@@ -1974,7 +1975,7 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req)
 	}
 
 	mq->flags &= ~MMC_QUEUE_NEW_REQUEST;
-	if (req && req->cmd_flags & REQ_DISCARD) {
+	if (cmd_flags & REQ_DISCARD) {
 		/* complete ongoing async transfer before issuing discard */
 		if (card->host->areq)
 			mmc_blk_issue_rw_rq(mq, NULL);
@@ -1983,7 +1984,7 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req)
 			ret = mmc_blk_issue_secdiscard_rq(mq, req);
 		else
 			ret = mmc_blk_issue_discard_rq(mq, req);
-	} else if (req && req->cmd_flags & REQ_FLUSH) {
+	} else if (cmd_flags & REQ_FLUSH) {
 		/* complete ongoing async transfer before issuing flush */
 		if (card->host->areq)
 			mmc_blk_issue_rw_rq(mq, NULL);
@@ -1999,7 +2000,7 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req)
 
 out:
 	if ((!req && !(mq->flags & MMC_QUEUE_NEW_REQUEST)) ||
-	     (req && (req->cmd_flags & MMC_REQ_SPECIAL_MASK)))
+	     (cmd_flags & MMC_REQ_SPECIAL_MASK))
 		/*
 		 * Release host when there are no more requests
 		 * and after special request(discard, flush) is done.

drivers/mmc/core/core.c

@@ -2460,7 +2460,8 @@ void mmc_rescan(struct work_struct *work)
 	 */
 	mmc_bus_put(host);
 
-	if (host->ops->get_cd && host->ops->get_cd(host) == 0) {
+	if (!(host->caps & MMC_CAP_NONREMOVABLE) && host->ops->get_cd &&
+			host->ops->get_cd(host) == 0) {
 		mmc_claim_host(host);
 		mmc_power_off(host);
 		mmc_release_host(host);

drivers/mmc/core/mmc.c

@@ -1119,14 +1119,10 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr,
 	 */
 	if (mmc_card_highspeed(card)) {
 		if ((card->ext_csd.card_type & EXT_CSD_CARD_TYPE_DDR_1_8V)
-			&& ((host->caps & (MMC_CAP_1_8V_DDR |
-			     MMC_CAP_UHS_DDR50))
-				== (MMC_CAP_1_8V_DDR | MMC_CAP_UHS_DDR50)))
+			&& (host->caps & MMC_CAP_1_8V_DDR))
 				ddr = MMC_1_8V_DDR_MODE;
 		else if ((card->ext_csd.card_type & EXT_CSD_CARD_TYPE_DDR_1_2V)
-			&& ((host->caps & (MMC_CAP_1_2V_DDR |
-			     MMC_CAP_UHS_DDR50))
-				== (MMC_CAP_1_2V_DDR | MMC_CAP_UHS_DDR50)))
+			&& (host->caps & MMC_CAP_1_2V_DDR))
 				ddr = MMC_1_2V_DDR_MODE;
 	}
 

drivers/mmc/core/quirks.c

@@ -13,6 +13,7 @@
 #include <linux/kernel.h>
 #include <linux/export.h>
 #include <linux/mmc/card.h>
+#include <linux/mmc/sdio_ids.h>
 
 #ifndef SDIO_VENDOR_ID_TI
 #define SDIO_VENDOR_ID_TI		0x0097
@@ -30,6 +31,10 @@
 #define SDIO_DEVICE_ID_STE_CW1200	0x2280
 #endif
 
+#ifndef SDIO_DEVICE_ID_MARVELL_8797_F0
+#define SDIO_DEVICE_ID_MARVELL_8797_F0	0x9128
+#endif
+
 /*
  * This hook just adds a quirk for all sdio devices
  */
@@ -58,6 +63,9 @@ static const struct mmc_fixup mmc_fixup_methods[] = {
 	SDIO_FIXUP(SDIO_VENDOR_ID_STE, SDIO_DEVICE_ID_STE_CW1200,
 		   add_quirk, MMC_QUIRK_BROKEN_BYTE_MODE_512),
 
+	SDIO_FIXUP(SDIO_VENDOR_ID_MARVELL, SDIO_DEVICE_ID_MARVELL_8797_F0,
+		   add_quirk, MMC_QUIRK_BROKEN_IRQ_POLLING),
+
 	END_FIXUP
 };
 

drivers/mmc/core/sd.c

@@ -11,6 +11,7 @@
  */
 
 #include <linux/err.h>
+#include <linux/sizes.h>
 #include <linux/slab.h>
 #include <linux/stat.h>
 #include <linux/pm_runtime.h>
@@ -45,6 +46,13 @@ static const unsigned int tacc_mant[] = {
 	35,	40,	45,	50,	55,	60,	70,	80,
 };
 
+static const unsigned int sd_au_size[] = {
+	0,		SZ_16K / 512,		SZ_32K / 512,	SZ_64K / 512,
+	SZ_128K / 512,	SZ_256K / 512,		SZ_512K / 512,	SZ_1M / 512,
+	SZ_2M / 512,	SZ_4M / 512,		SZ_8M / 512,	(SZ_8M + SZ_4M) / 512,
+	SZ_16M / 512,	(SZ_16M + SZ_8M) / 512,	SZ_32M / 512,	SZ_64M / 512,
+};
+
 #define UNSTUFF_BITS(resp,start,size)					\
 	({								\
 		const int __size = size;				\
@@ -216,7 +224,7 @@ static int mmc_decode_scr(struct mmc_card *card)
 static int mmc_read_ssr(struct mmc_card *card)
 {
 	unsigned int au, es, et, eo;
-	int err, i, max_au;
+	int err, i;
 	u32 *ssr;
 
 	if (!(card->csd.cmdclass & CCC_APP_SPEC)) {
@@ -240,26 +248,25 @@ static int mmc_read_ssr(struct mmc_card *card)
 	for (i = 0; i < 16; i++)
 		ssr[i] = be32_to_cpu(ssr[i]);
 
-	/* SD3.0 increases max AU size to 64MB (0xF) from 4MB (0x9) */
-	max_au = card->scr.sda_spec3 ? 0xF : 0x9;
-
 	/*
 	 * UNSTUFF_BITS only works with four u32s so we have to offset the
 	 * bitfield positions accordingly.
 	 */
 	au = UNSTUFF_BITS(ssr, 428 - 384, 4);
-	if (au > 0 && au <= max_au) {
-		card->ssr.au = 1 << (au + 4);
-		es = UNSTUFF_BITS(ssr, 408 - 384, 16);
-		et = UNSTUFF_BITS(ssr, 402 - 384, 6);
-		eo = UNSTUFF_BITS(ssr, 400 - 384, 2);
-		if (es && et) {
-			card->ssr.erase_timeout = (et * 1000) / es;
-			card->ssr.erase_offset = eo * 1000;
+	if (au) {
+		if (au <= 9 || card->scr.sda_spec3) {
+			card->ssr.au = sd_au_size[au];
+			es = UNSTUFF_BITS(ssr, 408 - 384, 16);
+			et = UNSTUFF_BITS(ssr, 402 - 384, 6);
+			if (es && et) {
+				eo = UNSTUFF_BITS(ssr, 400 - 384, 2);
+				card->ssr.erase_timeout = (et * 1000) / es;
+				card->ssr.erase_offset = eo * 1000;
+			}
+		} else {
+			pr_warning("%s: SD Status: Invalid Allocation Unit size.\n",
+				   mmc_hostname(card->host));
 		}
-	} else {
-		pr_warning("%s: SD Status: Invalid Allocation Unit "
-			"size.\n", mmc_hostname(card->host));
 	}
 out:
 	kfree(ssr);

drivers/mmc/core/sdio_irq.c

@@ -53,6 +53,17 @@ static int process_sdio_pending_irqs(struct mmc_host *host)
 		return ret;
 	}
 
+	if (pending && mmc_card_broken_irq_polling(card) &&
+	    !(host->caps & MMC_CAP_SDIO_IRQ)) {
+		unsigned char dummy;
+
+		/* A fake interrupt could be created when we poll SDIO_CCCR_INTx
+		 * register with a Marvell SD8797 card. A dummy CMD52 read to
+		 * function 0 register 0xff can avoid this.
+		 */
+		mmc_io_rw_direct(card, 0, 0, 0xff, 0, &dummy);
+	}
+
 	count = 0;
 	for (i = 1; i <= 7; i++) {
 		if (pending & (1 << i)) {

drivers/mmc/host/Kconfig

@@ -104,6 +104,18 @@ config MMC_SDHCI_PLTFM
 
 	  If unsure, say N.
 
+config MMC_SDHCI_OF_ARASAN
+	tristate "SDHCI OF support for the Arasan SDHCI controllers"
+	depends on MMC_SDHCI_PLTFM
+	depends on OF
+	help
+	  This selects the Arasan Secure Digital Host Controller Interface
+	  (SDHCI). This hardware is found e.g. in Xilinx' Zynq SoC.
+
+	  If you have a controller with this interface, say Y or M here.
+
+	  If unsure, say N.
+
 config MMC_SDHCI_OF_ESDHC
 	tristate "SDHCI OF support for the Freescale eSDHC controller"
 	depends on MMC_SDHCI_PLTFM
@@ -479,7 +491,8 @@ config MMC_TMIO
 
 config MMC_SDHI
 	tristate "SH-Mobile SDHI SD/SDIO controller support"
-	depends on SUPERH || ARCH_SHMOBILE
+	depends on SUPERH || ARM
+	depends on SUPERH || ARCH_SHMOBILE || COMPILE_TEST
 	select MMC_TMIO_CORE
 	help
 	  This provides support for the SDHI SD/SDIO controller found in
@@ -575,6 +588,16 @@ config MMC_DW_SOCFPGA
 	  This selects support for Altera SoCFPGA specific extensions to the
 	  Synopsys DesignWare Memory Card Interface driver.
 
+config MMC_DW_K3
+	tristate "K3 specific extensions for Synopsys DW Memory Card Interface"
+	depends on MMC_DW
+	select MMC_DW_PLTFM
+	select MMC_DW_IDMAC
+	help
+	  This selects support for Hisilicon K3 SoC specific extensions to the
+	  Synopsys DesignWare Memory Card Interface driver. Select this option
+	  for platforms based on Hisilicon K3 SoC's.
+
 config MMC_DW_PCI
 	tristate "Synopsys Designware MCI support on PCI bus"
 	depends on MMC_DW && PCI
@@ -588,7 +611,8 @@ config MMC_DW_PCI
 
 config MMC_SH_MMCIF
 	tristate "SuperH Internal MMCIF support"
-	depends on MMC_BLOCK && (SUPERH || ARCH_SHMOBILE)
+	depends on MMC_BLOCK
+	depends on SUPERH || ARCH_SHMOBILE || COMPILE_TEST
 	help
 	  This selects the MMC Host Interface controller (MMCIF).
 

drivers/mmc/host/Makefile

@@ -9,6 +9,7 @@ obj-$(CONFIG_MMC_MXS)		+= mxs-mmc.o
 obj-$(CONFIG_MMC_SDHCI)		+= sdhci.o
 obj-$(CONFIG_MMC_SDHCI_PCI)	+= sdhci-pci.o
 obj-$(subst m,y,$(CONFIG_MMC_SDHCI_PCI))	+= sdhci-pci-data.o
+obj-$(subst m,y,$(CONFIG_MMC_SDHCI_PCI))	+= sdhci-pci-o2micro.o
 obj-$(CONFIG_MMC_SDHCI_ACPI)	+= sdhci-acpi.o
 obj-$(CONFIG_MMC_SDHCI_PXAV3)	+= sdhci-pxav3.o
 obj-$(CONFIG_MMC_SDHCI_PXAV2)	+= sdhci-pxav2.o
@@ -43,6 +44,7 @@ obj-$(CONFIG_MMC_DW)		+= dw_mmc.o
 obj-$(CONFIG_MMC_DW_PLTFM)	+= dw_mmc-pltfm.o
 obj-$(CONFIG_MMC_DW_EXYNOS)	+= dw_mmc-exynos.o
 obj-$(CONFIG_MMC_DW_SOCFPGA)	+= dw_mmc-socfpga.o
+obj-$(CONFIG_MMC_DW_K3)		+= dw_mmc-k3.o
 obj-$(CONFIG_MMC_DW_PCI)	+= dw_mmc-pci.o
 obj-$(CONFIG_MMC_SH_MMCIF)	+= sh_mmcif.o
 obj-$(CONFIG_MMC_JZ4740)	+= jz4740_mmc.o
@@ -57,6 +59,7 @@ obj-$(CONFIG_MMC_SDHCI_CNS3XXX)		+= sdhci-cns3xxx.o
 obj-$(CONFIG_MMC_SDHCI_ESDHC_IMX)	+= sdhci-esdhc-imx.o
 obj-$(CONFIG_MMC_SDHCI_DOVE)		+= sdhci-dove.o
 obj-$(CONFIG_MMC_SDHCI_TEGRA)		+= sdhci-tegra.o
+obj-$(CONFIG_MMC_SDHCI_OF_ARASAN)	+= sdhci-of-arasan.o
 obj-$(CONFIG_MMC_SDHCI_OF_ESDHC)	+= sdhci-of-esdhc.o
 obj-$(CONFIG_MMC_SDHCI_OF_HLWD)		+= sdhci-of-hlwd.o
 obj-$(CONFIG_MMC_SDHCI_BCM_KONA)	+= sdhci-bcm-kona.o

drivers/mmc/host/atmel-mci.c

@@ -1192,11 +1192,22 @@ static void atmci_start_request(struct atmel_mci *host,
 	iflags |= ATMCI_CMDRDY;
 	cmd = mrq->cmd;
 	cmdflags = atmci_prepare_command(slot->mmc, cmd);
-	atmci_send_command(host, cmd, cmdflags);
+
+	/*
+	 * DMA transfer should be started before sending the command to avoid
+	 * unexpected errors especially for read operations in SDIO mode.
+	 * Unfortunately, in PDC mode, command has to be sent before starting
+	 * the transfer.
+	 */
+	if (host->submit_data != &atmci_submit_data_dma)
+		atmci_send_command(host, cmd, cmdflags);
 
 	if (data)
 		host->submit_data(host, data);
 
+	if (host->submit_data == &atmci_submit_data_dma)
+		atmci_send_command(host, cmd, cmdflags);
+
 	if (mrq->stop) {
 		host->stop_cmdr = atmci_prepare_command(slot->mmc, mrq->stop);
 		host->stop_cmdr |= ATMCI_CMDR_STOP_XFER;
@@ -1391,8 +1402,14 @@ static void atmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 		clk_unprepare(host->mck);
 
 	switch (ios->power_mode) {
+	case MMC_POWER_OFF:
+		if (!IS_ERR(mmc->supply.vmmc))
+			mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, 0);
+		break;
 	case MMC_POWER_UP:
 		set_bit(ATMCI_CARD_NEED_INIT, &slot->flags);
+		if (!IS_ERR(mmc->supply.vmmc))
+			mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, ios->vdd);
 		break;
 	default:
 		/*
@@ -2204,6 +2221,7 @@ static int __init atmci_init_slot(struct atmel_mci *host,
 	}
 
 	host->slot[id] = slot;
+	mmc_regulator_get_supply(mmc);
 	mmc_add_host(mmc);
 
 	if (gpio_is_valid(slot->detect_pin)) {

drivers/mmc/host/dw_mmc-k3.c

@@ -0,0 +1,95 @@
+/*
+ * Copyright (c) 2013 Linaro Ltd.
+ * Copyright (c) 2013 Hisilicon Limited.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/mmc/host.h>
+#include <linux/mmc/dw_mmc.h>
+#include <linux/of_address.h>
+
+#include "dw_mmc.h"
+#include "dw_mmc-pltfm.h"
+
+static void dw_mci_k3_set_ios(struct dw_mci *host, struct mmc_ios *ios)
+{
+	int ret;
+
+	ret = clk_set_rate(host->ciu_clk, ios->clock);
+	if (ret)
+		dev_warn(host->dev, "failed to set rate %uHz\n", ios->clock);
+
+	host->bus_hz = clk_get_rate(host->ciu_clk);
+}
+
+static const struct dw_mci_drv_data k3_drv_data = {
+	.set_ios		= dw_mci_k3_set_ios,
+};
+
+static const struct of_device_id dw_mci_k3_match[] = {
+	{ .compatible = "hisilicon,hi4511-dw-mshc", .data = &k3_drv_data, },
+	{},
+};
+MODULE_DEVICE_TABLE(of, dw_mci_k3_match);
+
+static int dw_mci_k3_probe(struct platform_device *pdev)
+{
+	const struct dw_mci_drv_data *drv_data;
+	const struct of_device_id *match;
+
+	match = of_match_node(dw_mci_k3_match, pdev->dev.of_node);
+	drv_data = match->data;
+
+	return dw_mci_pltfm_register(pdev, drv_data);
+}
+
+static int dw_mci_k3_suspend(struct device *dev)
+{
+	struct dw_mci *host = dev_get_drvdata(dev);
+	int ret;
+
+	ret = dw_mci_suspend(host);
+	if (!ret)
+		clk_disable_unprepare(host->ciu_clk);
+
+	return ret;
+}
+
+static int dw_mci_k3_resume(struct device *dev)
+{
+	struct dw_mci *host = dev_get_drvdata(dev);
+	int ret;
+
+	ret = clk_prepare_enable(host->ciu_clk);
+	if (ret) {
+		dev_err(host->dev, "failed to enable ciu clock\n");
+		return ret;
+	}
+
+	return dw_mci_resume(host);
+}
+
+static SIMPLE_DEV_PM_OPS(dw_mci_k3_pmops, dw_mci_k3_suspend, dw_mci_k3_resume);
+
+static struct platform_driver dw_mci_k3_pltfm_driver = {
+	.probe		= dw_mci_k3_probe,
+	.remove		= dw_mci_pltfm_remove,
+	.driver		= {
+		.name		= "dwmmc_k3",
+		.of_match_table	= dw_mci_k3_match,
+		.pm		= &dw_mci_k3_pmops,
+	},
+};
+
+module_platform_driver(dw_mci_k3_pltfm_driver);
+
+MODULE_DESCRIPTION("K3 Specific DW-MSHC Driver Extension");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:dwmmc-k3");

drivers/mmc/host/dw_mmc.c

@@ -36,6 +36,7 @@
 #include <linux/workqueue.h>
 #include <linux/of.h>
 #include <linux/of_gpio.h>
+#include <linux/mmc/slot-gpio.h>
 
 #include "dw_mmc.h"
 
@@ -1032,20 +1033,29 @@ static int dw_mci_get_cd(struct mmc_host *mmc)
 	int present;
 	struct dw_mci_slot *slot = mmc_priv(mmc);
 	struct dw_mci_board *brd = slot->host->pdata;
+	struct dw_mci *host = slot->host;
+	int gpio_cd = mmc_gpio_get_cd(mmc);
 
 	/* Use platform get_cd function, else try onboard card detect */
 	if (brd->quirks & DW_MCI_QUIRK_BROKEN_CARD_DETECTION)
 		present = 1;
 	else if (brd->get_cd)
 		present = !brd->get_cd(slot->id);
+	else if (!IS_ERR_VALUE(gpio_cd))
+		present = gpio_cd;
 	else
 		present = (mci_readl(slot->host, CDETECT) & (1 << slot->id))
 			== 0 ? 1 : 0;
 
-	if (present)
+	spin_lock_bh(&host->lock);
+	if (present) {
+		set_bit(DW_MMC_CARD_PRESENT, &slot->flags);
 		dev_dbg(&mmc->class_dev, "card is present\n");
-	else
+	} else {
+		clear_bit(DW_MMC_CARD_PRESENT, &slot->flags);
 		dev_dbg(&mmc->class_dev, "card is not present\n");
+	}
+	spin_unlock_bh(&host->lock);
 
 	return present;
 }
@@ -1926,10 +1936,6 @@ static void dw_mci_work_routine_card(struct work_struct *work)
 			/* Card change detected */
 			slot->last_detect_state = present;
 
-			/* Mark card as present if applicable */
-			if (present != 0)
-				set_bit(DW_MMC_CARD_PRESENT, &slot->flags);
-
 			/* Clean up queue if present */
 			mrq = slot->mrq;
 			if (mrq) {
@@ -1977,8 +1983,6 @@ static void dw_mci_work_routine_card(struct work_struct *work)
 
 			/* Power down slot */
 			if (present == 0) {
-				clear_bit(DW_MMC_CARD_PRESENT, &slot->flags);
-
 				/* Clear down the FIFO */
 				dw_mci_fifo_reset(host);
 #ifdef CONFIG_MMC_DW_IDMAC
@@ -2079,6 +2083,26 @@ static int dw_mci_of_get_wp_gpio(struct device *dev, u8 slot)
 
 	return gpio;
 }
+
+/* find the cd gpio for a given slot */
+static void dw_mci_of_get_cd_gpio(struct device *dev, u8 slot,
+					struct mmc_host *mmc)
+{
+	struct device_node *np = dw_mci_of_find_slot_node(dev, slot);
+	int gpio;
+
+	if (!np)
+		return;
+
+	gpio = of_get_named_gpio(np, "cd-gpios", 0);
+
+	/* Having a missing entry is valid; return silently */
+	if (!gpio_is_valid(gpio))
+		return;
+
+	if (mmc_gpio_request_cd(mmc, gpio, 0))
+		dev_warn(dev, "gpio [%d] request failed\n", gpio);
+}
 #else /* CONFIG_OF */
 static int dw_mci_of_get_slot_quirks(struct device *dev, u8 slot)
 {
@@ -2096,6 +2120,11 @@ static int dw_mci_of_get_wp_gpio(struct device *dev, u8 slot)
 {
 	return -EINVAL;
 }
+static void dw_mci_of_get_cd_gpio(struct device *dev, u8 slot,
+					struct mmc_host *mmc)
+{
+	return;
+}
 #endif /* CONFIG_OF */
 
 static int dw_mci_init_slot(struct dw_mci *host, unsigned int id)
@@ -2197,12 +2226,8 @@ static int dw_mci_init_slot(struct dw_mci *host, unsigned int id)
 #endif /* CONFIG_MMC_DW_IDMAC */
 	}
 
-	if (dw_mci_get_cd(mmc))
-		set_bit(DW_MMC_CARD_PRESENT, &slot->flags);
-	else
-		clear_bit(DW_MMC_CARD_PRESENT, &slot->flags);
-
 	slot->wp_gpio = dw_mci_of_get_wp_gpio(host->dev, slot->id);
+	dw_mci_of_get_cd_gpio(host->dev, slot->id, mmc);
 
 	ret = mmc_add_host(mmc);
 	if (ret)
@@ -2389,6 +2414,9 @@ static struct dw_mci_board *dw_mci_parse_dt(struct dw_mci *host)
 	if (of_find_property(np, "caps2-mmc-hs200-1_2v", NULL))
 		pdata->caps2 |= MMC_CAP2_HS200_1_2V_SDR;
 
+	if (of_get_property(np, "cd-inverted", NULL))
+		pdata->caps2 |= MMC_CAP2_CD_ACTIVE_HIGH;
+
 	return pdata;
 }
 

drivers/mmc/host/mxs-mmc.c

@@ -38,6 +38,7 @@
 #include <linux/mmc/host.h>
 #include <linux/mmc/mmc.h>
 #include <linux/mmc/sdio.h>
+#include <linux/mmc/slot-gpio.h>
 #include <linux/gpio.h>
 #include <linux/regulator/consumer.h>
 #include <linux/module.h>
@@ -69,37 +70,25 @@ struct mxs_mmc_host {
 	unsigned char			bus_width;
 	spinlock_t			lock;
 	int				sdio_irq_en;
-	int				wp_gpio;
-	bool				wp_inverted;
-	bool				cd_inverted;
-	bool				broken_cd;
-	bool				non_removable;
 };
 
-static int mxs_mmc_get_ro(struct mmc_host *mmc)
+static int mxs_mmc_get_cd(struct mmc_host *mmc)
 {
 	struct mxs_mmc_host *host = mmc_priv(mmc);
-	int ret;
-
-	if (!gpio_is_valid(host->wp_gpio))
-		return -EINVAL;
-
-	ret = gpio_get_value(host->wp_gpio);
+	struct mxs_ssp *ssp = &host->ssp;
+	int present, ret;
 
-	if (host->wp_inverted)
-		ret = !ret;
+	ret = mmc_gpio_get_cd(mmc);
+	if (ret >= 0)
+		return ret;
 
-	return ret;
-}
+	present = !(readl(ssp->base + HW_SSP_STATUS(ssp)) &
+			BM_SSP_STATUS_CARD_DETECT);
 
-static int mxs_mmc_get_cd(struct mmc_host *mmc)
-{
-	struct mxs_mmc_host *host = mmc_priv(mmc);
-	struct mxs_ssp *ssp = &host->ssp;
+	if (mmc->caps2 & MMC_CAP2_CD_ACTIVE_HIGH)
+		present = !present;
 
-	return host->non_removable || host->broken_cd ||
-		!(readl(ssp->base + HW_SSP_STATUS(ssp)) &
-		  BM_SSP_STATUS_CARD_DETECT) ^ host->cd_inverted;
+	return present;
 }
 
 static int mxs_mmc_reset(struct mxs_mmc_host *host)
@@ -549,7 +538,7 @@ static void mxs_mmc_enable_sdio_irq(struct mmc_host *mmc, int enable)
 
 static const struct mmc_host_ops mxs_mmc_ops = {
 	.request = mxs_mmc_request,
-	.get_ro = mxs_mmc_get_ro,
+	.get_ro = mmc_gpio_get_ro,
 	.get_cd = mxs_mmc_get_cd,
 	.set_ios = mxs_mmc_set_ios,
 	.enable_sdio_irq = mxs_mmc_enable_sdio_irq,
@@ -579,15 +568,12 @@ static int mxs_mmc_probe(struct platform_device *pdev)
 {
 	const struct of_device_id *of_id =
 			of_match_device(mxs_mmc_dt_ids, &pdev->dev);
-	struct device_node *np = pdev->dev.of_node;
 	struct mxs_mmc_host *host;
 	struct mmc_host *mmc;
 	struct resource *iores;
 	int ret = 0, irq_err;
 	struct regulator *reg_vmmc;
-	enum of_gpio_flags flags;
 	struct mxs_ssp *ssp;
-	u32 bus_width = 0;
 
 	iores = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	irq_err = platform_get_irq(pdev, 0);
@@ -648,23 +634,13 @@ static int mxs_mmc_probe(struct platform_device *pdev)
 	mmc->caps = MMC_CAP_SD_HIGHSPEED | MMC_CAP_MMC_HIGHSPEED |
 		    MMC_CAP_SDIO_IRQ | MMC_CAP_NEEDS_POLL;
 
-	of_property_read_u32(np, "bus-width", &bus_width);
-	if (bus_width == 4)
-		mmc->caps |= MMC_CAP_4_BIT_DATA;
-	else if (bus_width == 8)
-		mmc->caps |= MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA;
-	host->broken_cd = of_property_read_bool(np, "broken-cd");
-	host->non_removable = of_property_read_bool(np, "non-removable");
-	if (host->non_removable)
-		mmc->caps |= MMC_CAP_NONREMOVABLE;
-	host->wp_gpio = of_get_named_gpio_flags(np, "wp-gpios", 0, &flags);
-	if (flags & OF_GPIO_ACTIVE_LOW)
-		host->wp_inverted = 1;
-
-	host->cd_inverted = of_property_read_bool(np, "cd-inverted");
-
 	mmc->f_min = 400000;
 	mmc->f_max = 288000000;
+
+	ret = mmc_of_parse(mmc);
+	if (ret)
+		goto out_clk_disable;
+
 	mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
 
 	mmc->max_segs = 52;

drivers/mmc/host/sdhci-acpi.c

@@ -143,6 +143,7 @@ static const struct sdhci_acpi_uid_slot sdhci_acpi_uids[] = {
 	{ "80860F14" , "3" , &sdhci_acpi_slot_int_sd   },
 	{ "INT33BB"  , "2" , &sdhci_acpi_slot_int_sdio },
 	{ "INT33C6"  , NULL, &sdhci_acpi_slot_int_sdio },
+	{ "INT3436"  , NULL, &sdhci_acpi_slot_int_sdio },
 	{ "PNP0D40"  },
 	{ },
 };
@@ -151,6 +152,7 @@ static const struct acpi_device_id sdhci_acpi_ids[] = {
 	{ "80860F14" },
 	{ "INT33BB"  },
 	{ "INT33C6"  },
+	{ "INT3436"  },
 	{ "PNP0D40"  },
 	{ },
 };

drivers/mmc/host/sdhci-esdhc-imx.c

@@ -27,6 +27,7 @@
 #include <linux/of_gpio.h>
 #include <linux/pinctrl/consumer.h>
 #include <linux/platform_data/mmc-esdhc-imx.h>
+#include <linux/pm_runtime.h>
 #include "sdhci-pltfm.h"
 #include "sdhci-esdhc.h"
 
@@ -45,6 +46,8 @@
 #define  ESDHC_MIX_CTRL_FBCLK_SEL	(1 << 25)
 /* Bits 3 and 6 are not SDHCI standard definitions */
 #define  ESDHC_MIX_CTRL_SDHCI_MASK	0xb7
+/* Tuning bits */
+#define  ESDHC_MIX_CTRL_TUNING_MASK	0x03c00000
 
 /* dll control register */
 #define ESDHC_DLL_CTRL			0x60
@@ -385,6 +388,22 @@ static u16 esdhc_readw_le(struct sdhci_host *host, int reg)
 		return ret;
 	}
 
+	if (unlikely(reg == SDHCI_TRANSFER_MODE)) {
+		if (esdhc_is_usdhc(imx_data)) {
+			u32 m = readl(host->ioaddr + ESDHC_MIX_CTRL);
+			ret = m & ESDHC_MIX_CTRL_SDHCI_MASK;
+			/* Swap AC23 bit */
+			if (m & ESDHC_MIX_CTRL_AC23EN) {
+				ret &= ~ESDHC_MIX_CTRL_AC23EN;
+				ret |= SDHCI_TRNS_AUTO_CMD23;
+			}
+		} else {
+			ret = readw(host->ioaddr + SDHCI_TRANSFER_MODE);
+		}
+
+		return ret;
+	}
+
 	return readw(host->ioaddr + reg);
 }
 
@@ -421,24 +440,20 @@ static void esdhc_writew_le(struct sdhci_host *host, u16 val, int reg)
 		} else if (imx_data->socdata->flags & ESDHC_FLAG_STD_TUNING) {
 			u32 v = readl(host->ioaddr + SDHCI_ACMD12_ERR);
 			u32 m = readl(host->ioaddr + ESDHC_MIX_CTRL);
-			new_val = readl(host->ioaddr + ESDHC_TUNING_CTRL);
+			if (val & SDHCI_CTRL_TUNED_CLK) {
+				v |= ESDHC_MIX_CTRL_SMPCLK_SEL;
+			} else {
+				v &= ~ESDHC_MIX_CTRL_SMPCLK_SEL;
+				m &= ~ESDHC_MIX_CTRL_FBCLK_SEL;
+			}
+
 			if (val & SDHCI_CTRL_EXEC_TUNING) {
-				new_val |= ESDHC_STD_TUNING_EN |
-						ESDHC_TUNING_START_TAP;
 				v |= ESDHC_MIX_CTRL_EXE_TUNE;
 				m |= ESDHC_MIX_CTRL_FBCLK_SEL;
 			} else {
-				new_val &= ~ESDHC_STD_TUNING_EN;
 				v &= ~ESDHC_MIX_CTRL_EXE_TUNE;
-				m &= ~ESDHC_MIX_CTRL_FBCLK_SEL;
 			}
 
-			if (val & SDHCI_CTRL_TUNED_CLK)
-				v |= ESDHC_MIX_CTRL_SMPCLK_SEL;
-			else
-				v &= ~ESDHC_MIX_CTRL_SMPCLK_SEL;
-
-			writel(new_val, host->ioaddr + ESDHC_TUNING_CTRL);
 			writel(v, host->ioaddr + SDHCI_ACMD12_ERR);
 			writel(m, host->ioaddr + ESDHC_MIX_CTRL);
 		}
@@ -546,7 +561,10 @@ static void esdhc_writeb_le(struct sdhci_host *host, u8 val, int reg)
 		 * Do it manually here.
 		 */
 		if (esdhc_is_usdhc(imx_data)) {
-			writel(0, host->ioaddr + ESDHC_MIX_CTRL);
+			/* the tuning bits should be kept during reset */
+			new_val = readl(host->ioaddr + ESDHC_MIX_CTRL);
+			writel(new_val & ESDHC_MIX_CTRL_TUNING_MASK,
+					host->ioaddr + ESDHC_MIX_CTRL);
 			imx_data->is_ddr = 0;
 		}
 	}
@@ -558,19 +576,17 @@ static unsigned int esdhc_pltfm_get_max_clock(struct sdhci_host *host)
 	struct pltfm_imx_data *imx_data = pltfm_host->priv;
 	struct esdhc_platform_data *boarddata = &imx_data->boarddata;
 
-	u32 f_host = clk_get_rate(pltfm_host->clk);
-
-	if (boarddata->f_max && (boarddata->f_max < f_host))
+	if (boarddata->f_max && (boarddata->f_max < pltfm_host->clock))
 		return boarddata->f_max;
 	else
-		return f_host;
+		return pltfm_host->clock;
 }
 
 static unsigned int esdhc_pltfm_get_min_clock(struct sdhci_host *host)
 {
 	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
 
-	return clk_get_rate(pltfm_host->clk) / 256 / 16;
+	return pltfm_host->clock / 256 / 16;
 }
 
 static inline void esdhc_pltfm_set_clock(struct sdhci_host *host,
@@ -578,7 +594,7 @@ static inline void esdhc_pltfm_set_clock(struct sdhci_host *host,
 {
 	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
 	struct pltfm_imx_data *imx_data = pltfm_host->priv;
-	unsigned int host_clock = clk_get_rate(pltfm_host->clk);
+	unsigned int host_clock = pltfm_host->clock;
 	int pre_div = 2;
 	int div = 1;
 	u32 temp, val;
@@ -681,6 +697,7 @@ static void esdhc_prepare_tuning(struct sdhci_host *host, u32 val)
 	/* FIXME: delay a bit for card to be ready for next tuning due to errors */
 	mdelay(1);
 
+	pm_runtime_get_sync(host->mmc->parent);
 	reg = readl(host->ioaddr + ESDHC_MIX_CTRL);
 	reg |= ESDHC_MIX_CTRL_EXE_TUNE | ESDHC_MIX_CTRL_SMPCLK_SEL |
 			ESDHC_MIX_CTRL_FBCLK_SEL;
@@ -699,7 +716,7 @@ static void esdhc_request_done(struct mmc_request *mrq)
 static int esdhc_send_tuning_cmd(struct sdhci_host *host, u32 opcode)
 {
 	struct mmc_command cmd = {0};
-	struct mmc_request mrq = {0};
+	struct mmc_request mrq = {NULL};
 	struct mmc_data data = {0};
 	struct scatterlist sg;
 	char tuning_pattern[ESDHC_TUNING_BLOCK_PATTERN_LEN];
@@ -809,6 +826,7 @@ static int esdhc_change_pinstate(struct sdhci_host *host,
 		pinctrl = imx_data->pins_100mhz;
 		break;
 	case MMC_TIMING_UHS_SDR104:
+	case MMC_TIMING_MMC_HS200:
 		pinctrl = imx_data->pins_200mhz;
 		break;
 	default:
@@ -836,6 +854,7 @@ static int esdhc_set_uhs_signaling(struct sdhci_host *host, unsigned int uhs)
 		imx_data->uhs_mode = SDHCI_CTRL_UHS_SDR50;
 		break;
 	case MMC_TIMING_UHS_SDR104:
+	case MMC_TIMING_MMC_HS200:
 		imx_data->uhs_mode = SDHCI_CTRL_UHS_SDR104;
 		break;
 	case MMC_TIMING_UHS_DDR50:
@@ -976,7 +995,7 @@ static int sdhci_esdhc_imx_probe(struct platform_device *pdev)
 	}
 
 	pltfm_host->clk = imx_data->clk_per;
-
+	pltfm_host->clock = clk_get_rate(pltfm_host->clk);
 	clk_prepare_enable(imx_data->clk_per);
 	clk_prepare_enable(imx_data->clk_ipg);
 	clk_prepare_enable(imx_data->clk_ahb);
@@ -1009,11 +1028,18 @@ static int sdhci_esdhc_imx_probe(struct platform_device *pdev)
 	if (esdhc_is_usdhc(imx_data)) {
 		writel(0x08100810, host->ioaddr + ESDHC_WTMK_LVL);
 		host->quirks2 |= SDHCI_QUIRK2_PRESET_VALUE_BROKEN;
+		host->mmc->caps |= MMC_CAP_1_8V_DDR;
 	}
 
 	if (imx_data->socdata->flags & ESDHC_FLAG_MAN_TUNING)
 		sdhci_esdhc_ops.platform_execute_tuning =
 					esdhc_executing_tuning;
+
+	if (imx_data->socdata->flags & ESDHC_FLAG_STD_TUNING)
+		writel(readl(host->ioaddr + ESDHC_TUNING_CTRL) |
+			ESDHC_STD_TUNING_EN | ESDHC_TUNING_START_TAP,
+			host->ioaddr + ESDHC_TUNING_CTRL);
+
 	boarddata = &imx_data->boarddata;
 	if (sdhci_esdhc_imx_probe_dt(pdev, boarddata) < 0) {
 		if (!host->mmc->parent->platform_data) {
@@ -1053,7 +1079,7 @@ static int sdhci_esdhc_imx_probe(struct platform_device *pdev)
 		break;
 
 	case ESDHC_CD_PERMANENT:
-		host->mmc->caps = MMC_CAP_NONREMOVABLE;
+		host->mmc->caps |= MMC_CAP_NONREMOVABLE;
 		break;
 
 	case ESDHC_CD_NONE:
@@ -1094,6 +1120,12 @@ static int sdhci_esdhc_imx_probe(struct platform_device *pdev)
 	if (err)
 		goto disable_clk;
 
+	pm_runtime_set_active(&pdev->dev);
+	pm_runtime_enable(&pdev->dev);
+	pm_runtime_set_autosuspend_delay(&pdev->dev, 50);
+	pm_runtime_use_autosuspend(&pdev->dev);
+	pm_suspend_ignore_children(&pdev->dev, 1);
+
 	return 0;
 
 disable_clk:
@@ -1114,21 +1146,63 @@ static int sdhci_esdhc_imx_remove(struct platform_device *pdev)
 
 	sdhci_remove_host(host, dead);
 
+	pm_runtime_dont_use_autosuspend(&pdev->dev);
+	pm_runtime_disable(&pdev->dev);
+
+	if (!IS_ENABLED(CONFIG_PM_RUNTIME)) {
+		clk_disable_unprepare(imx_data->clk_per);
+		clk_disable_unprepare(imx_data->clk_ipg);
+		clk_disable_unprepare(imx_data->clk_ahb);
+	}
+
+	sdhci_pltfm_free(pdev);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_RUNTIME
+static int sdhci_esdhc_runtime_suspend(struct device *dev)
+{
+	struct sdhci_host *host = dev_get_drvdata(dev);
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct pltfm_imx_data *imx_data = pltfm_host->priv;
+	int ret;
+
+	ret = sdhci_runtime_suspend_host(host);
+
 	clk_disable_unprepare(imx_data->clk_per);
 	clk_disable_unprepare(imx_data->clk_ipg);
 	clk_disable_unprepare(imx_data->clk_ahb);
 
-	sdhci_pltfm_free(pdev);
+	return ret;
+}
 
-	return 0;
+static int sdhci_esdhc_runtime_resume(struct device *dev)
+{
+	struct sdhci_host *host = dev_get_drvdata(dev);
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct pltfm_imx_data *imx_data = pltfm_host->priv;
+
+	clk_prepare_enable(imx_data->clk_per);
+	clk_prepare_enable(imx_data->clk_ipg);
+	clk_prepare_enable(imx_data->clk_ahb);
+
+	return sdhci_runtime_resume_host(host);
 }
+#endif
+
+static const struct dev_pm_ops sdhci_esdhc_pmops = {
+	SET_SYSTEM_SLEEP_PM_OPS(sdhci_pltfm_suspend, sdhci_pltfm_resume)
+	SET_RUNTIME_PM_OPS(sdhci_esdhc_runtime_suspend,
+				sdhci_esdhc_runtime_resume, NULL)
+};
 
 static struct platform_driver sdhci_esdhc_imx_driver = {
 	.driver		= {
 		.name	= "sdhci-esdhc-imx",
 		.owner	= THIS_MODULE,
 		.of_match_table = imx_esdhc_dt_ids,
-		.pm	= SDHCI_PLTFM_PMOPS,
+		.pm	= &sdhci_esdhc_pmops,
 	},
 	.id_table	= imx_esdhc_devtype,
 	.probe		= sdhci_esdhc_imx_probe,

drivers/mmc/host/sdhci-of-arasan.c

@@ -0,0 +1,224 @@
+/*
+ * Arasan Secure Digital Host Controller Interface.
+ * Copyright (C) 2011 - 2012 Michal Simek <monstr@monstr.eu>
+ * Copyright (c) 2012 Wind River Systems, Inc.
+ * Copyright (C) 2013 Pengutronix e.K.
+ * Copyright (C) 2013 Xilinx Inc.
+ *
+ * Based on sdhci-of-esdhc.c
+ *
+ * Copyright (c) 2007 Freescale Semiconductor, Inc.
+ * Copyright (c) 2009 MontaVista Software, Inc.
+ *
+ * Authors: Xiaobo Xie <X.Xie@freescale.com>
+ *	    Anton Vorontsov <avorontsov@ru.mvista.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ */
+
+#include <linux/module.h>
+#include "sdhci-pltfm.h"
+
+#define SDHCI_ARASAN_CLK_CTRL_OFFSET	0x2c
+
+#define CLK_CTRL_TIMEOUT_SHIFT		16
+#define CLK_CTRL_TIMEOUT_MASK		(0xf << CLK_CTRL_TIMEOUT_SHIFT)
+#define CLK_CTRL_TIMEOUT_MIN_EXP	13
+
+/**
+ * struct sdhci_arasan_data
+ * @clk_ahb:	Pointer to the AHB clock
+ */
+struct sdhci_arasan_data {
+	struct clk	*clk_ahb;
+};
+
+static unsigned int sdhci_arasan_get_timeout_clock(struct sdhci_host *host)
+{
+	u32 div;
+	unsigned long freq;
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+
+	div = readl(host->ioaddr + SDHCI_ARASAN_CLK_CTRL_OFFSET);
+	div = (div & CLK_CTRL_TIMEOUT_MASK) >> CLK_CTRL_TIMEOUT_SHIFT;
+
+	freq = clk_get_rate(pltfm_host->clk);
+	freq /= 1 << (CLK_CTRL_TIMEOUT_MIN_EXP + div);
+
+	return freq;
+}
+
+static struct sdhci_ops sdhci_arasan_ops = {
+	.get_max_clock = sdhci_pltfm_clk_get_max_clock,
+	.get_timeout_clock = sdhci_arasan_get_timeout_clock,
+};
+
+static struct sdhci_pltfm_data sdhci_arasan_pdata = {
+	.ops = &sdhci_arasan_ops,
+};
+
+#ifdef CONFIG_PM_SLEEP
+/**
+ * sdhci_arasan_suspend - Suspend method for the driver
+ * @dev:	Address of the device structure
+ * Returns 0 on success and error value on error
+ *
+ * Put the device in a low power state.
+ */
+static int sdhci_arasan_suspend(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct sdhci_host *host = platform_get_drvdata(pdev);
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct sdhci_arasan_data *sdhci_arasan = pltfm_host->priv;
+	int ret;
+
+	ret = sdhci_suspend_host(host);
+	if (ret)
+		return ret;
+
+	clk_disable(pltfm_host->clk);
+	clk_disable(sdhci_arasan->clk_ahb);
+
+	return 0;
+}
+
+/**
+ * sdhci_arasan_resume - Resume method for the driver
+ * @dev:	Address of the device structure
+ * Returns 0 on success and error value on error
+ *
+ * Resume operation after suspend
+ */
+static int sdhci_arasan_resume(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct sdhci_host *host = platform_get_drvdata(pdev);
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct sdhci_arasan_data *sdhci_arasan = pltfm_host->priv;
+	int ret;
+
+	ret = clk_enable(sdhci_arasan->clk_ahb);
+	if (ret) {
+		dev_err(dev, "Cannot enable AHB clock.\n");
+		return ret;
+	}
+
+	ret = clk_enable(pltfm_host->clk);
+	if (ret) {
+		dev_err(dev, "Cannot enable SD clock.\n");
+		clk_disable(sdhci_arasan->clk_ahb);
+		return ret;
+	}
+
+	return sdhci_resume_host(host);
+}
+#endif /* ! CONFIG_PM_SLEEP */
+
+static SIMPLE_DEV_PM_OPS(sdhci_arasan_dev_pm_ops, sdhci_arasan_suspend,
+			 sdhci_arasan_resume);
+
+static int sdhci_arasan_probe(struct platform_device *pdev)
+{
+	int ret;
+	struct clk *clk_xin;
+	struct sdhci_host *host;
+	struct sdhci_pltfm_host *pltfm_host;
+	struct sdhci_arasan_data *sdhci_arasan;
+
+	sdhci_arasan = devm_kzalloc(&pdev->dev, sizeof(*sdhci_arasan),
+			GFP_KERNEL);
+	if (!sdhci_arasan)
+		return -ENOMEM;
+
+	sdhci_arasan->clk_ahb = devm_clk_get(&pdev->dev, "clk_ahb");
+	if (IS_ERR(sdhci_arasan->clk_ahb)) {
+		dev_err(&pdev->dev, "clk_ahb clock not found.\n");
+		return PTR_ERR(sdhci_arasan->clk_ahb);
+	}
+
+	clk_xin = devm_clk_get(&pdev->dev, "clk_xin");
+	if (IS_ERR(clk_xin)) {
+		dev_err(&pdev->dev, "clk_xin clock not found.\n");
+		return PTR_ERR(clk_xin);
+	}
+
+	ret = clk_prepare_enable(sdhci_arasan->clk_ahb);
+	if (ret) {
+		dev_err(&pdev->dev, "Unable to enable AHB clock.\n");
+		return ret;
+	}
+
+	ret = clk_prepare_enable(clk_xin);
+	if (ret) {
+		dev_err(&pdev->dev, "Unable to enable SD clock.\n");
+		goto clk_dis_ahb;
+	}
+
+	host = sdhci_pltfm_init(pdev, &sdhci_arasan_pdata, 0);
+	if (IS_ERR(host)) {
+		ret = PTR_ERR(host);
+		dev_err(&pdev->dev, "platform init failed (%u)\n", ret);
+		goto clk_disable_all;
+	}
+
+	sdhci_get_of_property(pdev);
+	pltfm_host = sdhci_priv(host);
+	pltfm_host->priv = sdhci_arasan;
+	pltfm_host->clk = clk_xin;
+
+	ret = sdhci_add_host(host);
+	if (ret) {
+		dev_err(&pdev->dev, "platform register failed (%u)\n", ret);
+		goto err_pltfm_free;
+	}
+
+	return 0;
+
+err_pltfm_free:
+	sdhci_pltfm_free(pdev);
+clk_disable_all:
+	clk_disable_unprepare(clk_xin);
+clk_dis_ahb:
+	clk_disable_unprepare(sdhci_arasan->clk_ahb);
+
+	return ret;
+}
+
+static int sdhci_arasan_remove(struct platform_device *pdev)
+{
+	struct sdhci_host *host = platform_get_drvdata(pdev);
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct sdhci_arasan_data *sdhci_arasan = pltfm_host->priv;
+
+	clk_disable_unprepare(pltfm_host->clk);
+	clk_disable_unprepare(sdhci_arasan->clk_ahb);
+
+	return sdhci_pltfm_unregister(pdev);
+}
+
+static const struct of_device_id sdhci_arasan_of_match[] = {
+	{ .compatible = "arasan,sdhci-8.9a" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, sdhci_arasan_of_match);
+
+static struct platform_driver sdhci_arasan_driver = {
+	.driver = {
+		.name = "sdhci-arasan",
+		.owner = THIS_MODULE,
+		.of_match_table = sdhci_arasan_of_match,
+		.pm = &sdhci_arasan_dev_pm_ops,
+	},
+	.probe = sdhci_arasan_probe,
+	.remove = sdhci_arasan_remove,
+};
+
+module_platform_driver(sdhci_arasan_driver);
+
+MODULE_DESCRIPTION("Driver for the Arasan SDHCI Controller");
+MODULE_AUTHOR("Soeren Brinkmann <soren.brinkmann@xilinx.com>");
+MODULE_LICENSE("GPL");

drivers/mmc/host/sdhci-pci-o2micro.c

@@ -0,0 +1,321 @@
+/*
+ * Copyright (C) 2013 BayHub Technology Ltd.
+ *
+ * Authors: Peter Guo <peter.guo@bayhubtech.com>
+ *          Adam Lee <adam.lee@canonical.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/pci.h>
+
+#include "sdhci.h"
+#include "sdhci-pci.h"
+#include "sdhci-pci-o2micro.h"
+
+void sdhci_pci_o2_fujin2_pci_init(struct sdhci_pci_chip *chip)
+{
+	u32 scratch_32;
+	int ret;
+	/* Improve write performance for SD3.0 */
+	ret = pci_read_config_dword(chip->pdev, O2_SD_DEV_CTRL, &scratch_32);
+	if (ret)
+		return;
+	scratch_32 &= ~((1 << 12) | (1 << 13) | (1 << 14));
+	pci_write_config_dword(chip->pdev, O2_SD_DEV_CTRL, scratch_32);
+
+	/* Enable Link abnormal reset generating Reset */
+	ret = pci_read_config_dword(chip->pdev, O2_SD_MISC_REG5, &scratch_32);
+	if (ret)
+		return;
+	scratch_32 &= ~((1 << 19) | (1 << 11));
+	scratch_32 |= (1 << 10);
+	pci_write_config_dword(chip->pdev, O2_SD_MISC_REG5, scratch_32);
+
+	/* set card power over current protection */
+	ret = pci_read_config_dword(chip->pdev, O2_SD_TEST_REG, &scratch_32);
+	if (ret)
+		return;
+	scratch_32 |= (1 << 4);
+	pci_write_config_dword(chip->pdev, O2_SD_TEST_REG, scratch_32);
+
+	/* adjust the output delay for SD mode */
+	pci_write_config_dword(chip->pdev, O2_SD_DELAY_CTRL, 0x00002492);
+
+	/* Set the output voltage setting of Aux 1.2v LDO */
+	ret = pci_read_config_dword(chip->pdev, O2_SD_LD0_CTRL, &scratch_32);
+	if (ret)
+		return;
+	scratch_32 &= ~(3 << 12);
+	pci_write_config_dword(chip->pdev, O2_SD_LD0_CTRL, scratch_32);
+
+	/* Set Max power supply capability of SD host */
+	ret = pci_read_config_dword(chip->pdev, O2_SD_CAP_REG0, &scratch_32);
+	if (ret)
+		return;
+	scratch_32 &= ~(0x01FE);
+	scratch_32 |= 0x00CC;
+	pci_write_config_dword(chip->pdev, O2_SD_CAP_REG0, scratch_32);
+	/* Set DLL Tuning Window */
+	ret = pci_read_config_dword(chip->pdev,
+				    O2_SD_TUNING_CTRL, &scratch_32);
+	if (ret)
+		return;
+	scratch_32 &= ~(0x000000FF);
+	scratch_32 |= 0x00000066;
+	pci_write_config_dword(chip->pdev, O2_SD_TUNING_CTRL, scratch_32);
+
+	/* Set UHS2 T_EIDLE */
+	ret = pci_read_config_dword(chip->pdev,
+				    O2_SD_UHS2_L1_CTRL, &scratch_32);
+	if (ret)
+		return;
+	scratch_32 &= ~(0x000000FC);
+	scratch_32 |= 0x00000084;
+	pci_write_config_dword(chip->pdev, O2_SD_UHS2_L1_CTRL, scratch_32);
+
+	/* Set UHS2 Termination */
+	ret = pci_read_config_dword(chip->pdev, O2_SD_FUNC_REG3, &scratch_32);
+	if (ret)
+		return;
+	scratch_32 &= ~((1 << 21) | (1 << 30));
+
+	/* Set RTD3 function disabled */
+	scratch_32 |= ((1 << 29) | (1 << 28));
+	pci_write_config_dword(chip->pdev, O2_SD_FUNC_REG3, scratch_32);
+
+	/* Set L1 Entrance Timer */
+	ret = pci_read_config_dword(chip->pdev, O2_SD_CAPS, &scratch_32);
+	if (ret)
+		return;
+	scratch_32 &= ~(0xf0000000);
+	scratch_32 |= 0x30000000;
+	pci_write_config_dword(chip->pdev, O2_SD_CAPS, scratch_32);
+
+	ret = pci_read_config_dword(chip->pdev,
+				    O2_SD_MISC_CTRL4, &scratch_32);
+	if (ret)
+		return;
+	scratch_32 &= ~(0x000f0000);
+	scratch_32 |= 0x00080000;
+	pci_write_config_dword(chip->pdev, O2_SD_MISC_CTRL4, scratch_32);
+}
+EXPORT_SYMBOL_GPL(sdhci_pci_o2_fujin2_pci_init);
+
+int sdhci_pci_o2_probe_slot(struct sdhci_pci_slot *slot)
+{
+	struct sdhci_pci_chip *chip;
+	struct sdhci_host *host;
+	u32 reg;
+
+	chip = slot->chip;
+	host = slot->host;
+	switch (chip->pdev->device) {
+	case PCI_DEVICE_ID_O2_SDS0:
+	case PCI_DEVICE_ID_O2_SEABIRD0:
+	case PCI_DEVICE_ID_O2_SEABIRD1:
+	case PCI_DEVICE_ID_O2_SDS1:
+	case PCI_DEVICE_ID_O2_FUJIN2:
+		reg = sdhci_readl(host, O2_SD_VENDOR_SETTING);
+		if (reg & 0x1)
+			host->quirks |= SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12;
+
+		if (chip->pdev->device != PCI_DEVICE_ID_O2_FUJIN2)
+			break;
+		/* set dll watch dog timer */
+		reg = sdhci_readl(host, O2_SD_VENDOR_SETTING2);
+		reg |= (1 << 12);
+		sdhci_writel(host, reg, O2_SD_VENDOR_SETTING2);
+
+		break;
+	default:
+		break;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(sdhci_pci_o2_probe_slot);
+
+int sdhci_pci_o2_probe(struct sdhci_pci_chip *chip)
+{
+	int ret;
+	u8 scratch;
+	u32 scratch_32;
+
+	switch (chip->pdev->device) {
+	case PCI_DEVICE_ID_O2_8220:
+	case PCI_DEVICE_ID_O2_8221:
+	case PCI_DEVICE_ID_O2_8320:
+	case PCI_DEVICE_ID_O2_8321:
+		/* This extra setup is required due to broken ADMA. */
+		ret = pci_read_config_byte(chip->pdev,
+				O2_SD_LOCK_WP, &scratch);
+		if (ret)
+			return ret;
+		scratch &= 0x7f;
+		pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch);
+
+		/* Set Multi 3 to VCC3V# */
+		pci_write_config_byte(chip->pdev, O2_SD_MULTI_VCC3V, 0x08);
+
+		/* Disable CLK_REQ# support after media DET */
+		ret = pci_read_config_byte(chip->pdev,
+				O2_SD_CLKREQ, &scratch);
+		if (ret)
+			return ret;
+		scratch |= 0x20;
+		pci_write_config_byte(chip->pdev, O2_SD_CLKREQ, scratch);
+
+		/* Choose capabilities, enable SDMA.  We have to write 0x01
+		 * to the capabilities register first to unlock it.
+		 */
+		ret = pci_read_config_byte(chip->pdev, O2_SD_CAPS, &scratch);
+		if (ret)
+			return ret;
+		scratch |= 0x01;
+		pci_write_config_byte(chip->pdev, O2_SD_CAPS, scratch);
+		pci_write_config_byte(chip->pdev, O2_SD_CAPS, 0x73);
+
+		/* Disable ADMA1/2 */
+		pci_write_config_byte(chip->pdev, O2_SD_ADMA1, 0x39);
+		pci_write_config_byte(chip->pdev, O2_SD_ADMA2, 0x08);
+
+		/* Disable the infinite transfer mode */
+		ret = pci_read_config_byte(chip->pdev,
+				O2_SD_INF_MOD, &scratch);
+		if (ret)
+			return ret;
+		scratch |= 0x08;
+		pci_write_config_byte(chip->pdev, O2_SD_INF_MOD, scratch);
+
+		/* Lock WP */
+		ret = pci_read_config_byte(chip->pdev,
+				O2_SD_LOCK_WP, &scratch);
+		if (ret)
+			return ret;
+		scratch |= 0x80;
+		pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch);
+		break;
+	case PCI_DEVICE_ID_O2_SDS0:
+	case PCI_DEVICE_ID_O2_SDS1:
+	case PCI_DEVICE_ID_O2_FUJIN2:
+		/* UnLock WP */
+		ret = pci_read_config_byte(chip->pdev,
+				O2_SD_LOCK_WP, &scratch);
+		if (ret)
+			return ret;
+
+		scratch &= 0x7f;
+		pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch);
+
+		/* Set timeout CLK */
+		ret = pci_read_config_dword(chip->pdev,
+					    O2_SD_CLK_SETTING, &scratch_32);
+		if (ret)
+			return ret;
+
+		scratch_32 &= ~(0xFF00);
+		scratch_32 |= 0x07E0C800;
+		pci_write_config_dword(chip->pdev,
+				       O2_SD_CLK_SETTING, scratch_32);
+
+		ret = pci_read_config_dword(chip->pdev,
+					    O2_SD_CLKREQ, &scratch_32);
+		if (ret)
+			return ret;
+		scratch_32 |= 0x3;
+		pci_write_config_dword(chip->pdev, O2_SD_CLKREQ, scratch_32);
+
+		ret = pci_read_config_dword(chip->pdev,
+					    O2_SD_PLL_SETTING, &scratch_32);
+		if (ret)
+			return ret;
+
+		scratch_32 &= ~(0x1F3F070E);
+		scratch_32 |= 0x18270106;
+		pci_write_config_dword(chip->pdev,
+				       O2_SD_PLL_SETTING, scratch_32);
+
+		/* Disable UHS1 funciton */
+		ret = pci_read_config_dword(chip->pdev,
+					    O2_SD_CAP_REG2, &scratch_32);
+		if (ret)
+			return ret;
+		scratch_32 &= ~(0xE0);
+		pci_write_config_dword(chip->pdev,
+				       O2_SD_CAP_REG2, scratch_32);
+
+		if (chip->pdev->device == PCI_DEVICE_ID_O2_FUJIN2)
+			sdhci_pci_o2_fujin2_pci_init(chip);
+
+		/* Lock WP */
+		ret = pci_read_config_byte(chip->pdev,
+					   O2_SD_LOCK_WP, &scratch);
+		if (ret)
+			return ret;
+		scratch |= 0x80;
+		pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch);
+		break;
+	case PCI_DEVICE_ID_O2_SEABIRD0:
+	case PCI_DEVICE_ID_O2_SEABIRD1:
+		/* UnLock WP */
+		ret = pci_read_config_byte(chip->pdev,
+				O2_SD_LOCK_WP, &scratch);
+		if (ret)
+			return ret;
+
+		scratch &= 0x7f;
+		pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch);
+
+		ret = pci_read_config_dword(chip->pdev,
+					    O2_SD_FUNC_REG0, &scratch_32);
+
+		if ((scratch_32 & 0xff000000) == 0x01000000) {
+			scratch_32 &= 0x0000FFFF;
+			scratch_32 |= 0x1F340000;
+
+			pci_write_config_dword(chip->pdev,
+					       O2_SD_PLL_SETTING, scratch_32);
+		} else {
+			scratch_32 &= 0x0000FFFF;
+			scratch_32 |= 0x2c280000;
+
+			pci_write_config_dword(chip->pdev,
+					       O2_SD_PLL_SETTING, scratch_32);
+
+			ret = pci_read_config_dword(chip->pdev,
+						    O2_SD_FUNC_REG4,
+						    &scratch_32);
+			scratch_32 |= (1 << 22);
+			pci_write_config_dword(chip->pdev,
+					       O2_SD_FUNC_REG4, scratch_32);
+		}
+
+		/* Lock WP */
+		ret = pci_read_config_byte(chip->pdev,
+					   O2_SD_LOCK_WP, &scratch);
+		if (ret)
+			return ret;
+		scratch |= 0x80;
+		pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch);
+		break;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(sdhci_pci_o2_probe);
+
+int sdhci_pci_o2_resume(struct sdhci_pci_chip *chip)
+{
+	sdhci_pci_o2_probe(chip);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(sdhci_pci_o2_resume);

drivers/mmc/host/sdhci-pci-o2micro.h

@@ -0,0 +1,72 @@
+/*
+ * Copyright (C) 2013 BayHub Technology Ltd.
+ *
+ * Authors: Peter Guo <peter.guo@bayhubtech.com>
+ *          Adam Lee <adam.lee@canonical.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __SDHCI_PCI_O2MICRO_H
+#define __SDHCI_PCI_O2MICRO_H
+
+#include "sdhci-pci.h"
+
+/*
+ * O2Micro device IDs
+ */
+
+#define PCI_DEVICE_ID_O2_SDS0		0x8420
+#define PCI_DEVICE_ID_O2_SDS1		0x8421
+#define PCI_DEVICE_ID_O2_FUJIN2		0x8520
+#define PCI_DEVICE_ID_O2_SEABIRD0	0x8620
+#define PCI_DEVICE_ID_O2_SEABIRD1	0x8621
+
+/*
+ * O2Micro device registers
+ */
+
+#define O2_SD_MISC_REG5		0x64
+#define O2_SD_LD0_CTRL		0x68
+#define O2_SD_DEV_CTRL		0x88
+#define O2_SD_LOCK_WP		0xD3
+#define O2_SD_TEST_REG		0xD4
+#define O2_SD_FUNC_REG0		0xDC
+#define O2_SD_MULTI_VCC3V	0xEE
+#define O2_SD_CLKREQ		0xEC
+#define O2_SD_CAPS		0xE0
+#define O2_SD_ADMA1		0xE2
+#define O2_SD_ADMA2		0xE7
+#define O2_SD_INF_MOD		0xF1
+#define O2_SD_MISC_CTRL4	0xFC
+#define O2_SD_TUNING_CTRL	0x300
+#define O2_SD_PLL_SETTING	0x304
+#define O2_SD_CLK_SETTING	0x328
+#define O2_SD_CAP_REG2		0x330
+#define O2_SD_CAP_REG0		0x334
+#define O2_SD_UHS1_CAP_SETTING	0x33C
+#define O2_SD_DELAY_CTRL	0x350
+#define O2_SD_UHS2_L1_CTRL	0x35C
+#define O2_SD_FUNC_REG3		0x3E0
+#define O2_SD_FUNC_REG4		0x3E4
+
+#define O2_SD_VENDOR_SETTING	0x110
+#define O2_SD_VENDOR_SETTING2	0x1C8
+
+extern void sdhci_pci_o2_fujin2_pci_init(struct sdhci_pci_chip *chip);
+
+extern int sdhci_pci_o2_probe_slot(struct sdhci_pci_slot *slot);
+
+extern int sdhci_pci_o2_probe(struct sdhci_pci_chip *chip);
+
+extern int sdhci_pci_o2_resume(struct sdhci_pci_chip *chip);
+
+#endif /* __SDHCI_PCI_O2MICRO_H */

drivers/mmc/host/sdhci-pci.c

@@ -27,79 +27,8 @@
 #include <linux/mmc/sdhci-pci-data.h>
 
 #include "sdhci.h"
-
-/*
- * PCI device IDs
- */
-#define PCI_DEVICE_ID_INTEL_PCH_SDIO0	0x8809
-#define PCI_DEVICE_ID_INTEL_PCH_SDIO1	0x880a
-#define PCI_DEVICE_ID_INTEL_BYT_EMMC	0x0f14
-#define PCI_DEVICE_ID_INTEL_BYT_SDIO	0x0f15
-#define PCI_DEVICE_ID_INTEL_BYT_SD	0x0f16
-#define PCI_DEVICE_ID_INTEL_BYT_EMMC2	0x0f50
-#define PCI_DEVICE_ID_INTEL_MRFL_MMC	0x1190
-#define PCI_DEVICE_ID_INTEL_CLV_SDIO0	0x08f9
-#define PCI_DEVICE_ID_INTEL_CLV_SDIO1	0x08fa
-#define PCI_DEVICE_ID_INTEL_CLV_SDIO2	0x08fb
-#define PCI_DEVICE_ID_INTEL_CLV_EMMC0	0x08e5
-#define PCI_DEVICE_ID_INTEL_CLV_EMMC1	0x08e6
-
-/*
- * PCI registers
- */
-
-#define PCI_SDHCI_IFPIO			0x00
-#define PCI_SDHCI_IFDMA			0x01
-#define PCI_SDHCI_IFVENDOR		0x02
-
-#define PCI_SLOT_INFO			0x40	/* 8 bits */
-#define  PCI_SLOT_INFO_SLOTS(x)		((x >> 4) & 7)
-#define  PCI_SLOT_INFO_FIRST_BAR_MASK	0x07
-
-#define MAX_SLOTS			8
-
-struct sdhci_pci_chip;
-struct sdhci_pci_slot;
-
-struct sdhci_pci_fixes {
-	unsigned int		quirks;
-	unsigned int		quirks2;
-	bool			allow_runtime_pm;
-
-	int			(*probe) (struct sdhci_pci_chip *);
-
-	int			(*probe_slot) (struct sdhci_pci_slot *);
-	void			(*remove_slot) (struct sdhci_pci_slot *, int);
-
-	int			(*suspend) (struct sdhci_pci_chip *);
-	int			(*resume) (struct sdhci_pci_chip *);
-};
-
-struct sdhci_pci_slot {
-	struct sdhci_pci_chip	*chip;
-	struct sdhci_host	*host;
-	struct sdhci_pci_data	*data;
-
-	int			pci_bar;
-	int			rst_n_gpio;
-	int			cd_gpio;
-	int			cd_irq;
-
-	void (*hw_reset)(struct sdhci_host *host);
-};
-
-struct sdhci_pci_chip {
-	struct pci_dev		*pdev;
-
-	unsigned int		quirks;
-	unsigned int		quirks2;
-	bool			allow_runtime_pm;
-	const struct sdhci_pci_fixes *fixes;
-
-	int			num_slots;	/* Slots on controller */
-	struct sdhci_pci_slot	*slots[MAX_SLOTS]; /* Pointers to host slots */
-};
-
+#include "sdhci-pci.h"
+#include "sdhci-pci-o2micro.h"
 
 /*****************************************************************************\
  *                                                                           *
@@ -296,6 +225,7 @@ static const struct sdhci_pci_fixes sdhci_intel_mrst_hc1_hc2 = {
 static const struct sdhci_pci_fixes sdhci_intel_mfd_sd = {
 	.quirks		= SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC,
 	.allow_runtime_pm = true,
+	.own_cd_for_runtime_pm = true,
 };
 
 static const struct sdhci_pci_fixes sdhci_intel_mfd_sdio = {
@@ -360,6 +290,7 @@ static const struct sdhci_pci_fixes sdhci_intel_byt_sdio = {
 static const struct sdhci_pci_fixes sdhci_intel_byt_sd = {
 	.quirks2	= SDHCI_QUIRK2_CARD_ON_NEEDS_BUS_ON,
 	.allow_runtime_pm = true,
+	.own_cd_for_runtime_pm = true,
 };
 
 /* Define Host controllers for Intel Merrifield platform */
@@ -381,6 +312,7 @@ static int intel_mrfl_mmc_probe_slot(struct sdhci_pci_slot *slot)
 
 static const struct sdhci_pci_fixes sdhci_intel_mrfl_mmc = {
 	.quirks		= SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC,
+	.quirks2	= SDHCI_QUIRK2_BROKEN_HS200,
 	.probe_slot	= intel_mrfl_mmc_probe_slot,
 };
 
@@ -393,65 +325,6 @@ static const struct sdhci_pci_fixes sdhci_intel_mrfl_mmc = {
 #define O2_SD_ADMA2		0xE7
 #define O2_SD_INF_MOD		0xF1
 
-static int o2_probe(struct sdhci_pci_chip *chip)
-{
-	int ret;
-	u8 scratch;
-
-	switch (chip->pdev->device) {
-	case PCI_DEVICE_ID_O2_8220:
-	case PCI_DEVICE_ID_O2_8221:
-	case PCI_DEVICE_ID_O2_8320:
-	case PCI_DEVICE_ID_O2_8321:
-		/* This extra setup is required due to broken ADMA. */
-		ret = pci_read_config_byte(chip->pdev, O2_SD_LOCK_WP, &scratch);
-		if (ret)
-			return ret;
-		scratch &= 0x7f;
-		pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch);
-
-		/* Set Multi 3 to VCC3V# */
-		pci_write_config_byte(chip->pdev, O2_SD_MULTI_VCC3V, 0x08);
-
-		/* Disable CLK_REQ# support after media DET */
-		ret = pci_read_config_byte(chip->pdev, O2_SD_CLKREQ, &scratch);
-		if (ret)
-			return ret;
-		scratch |= 0x20;
-		pci_write_config_byte(chip->pdev, O2_SD_CLKREQ, scratch);
-
-		/* Choose capabilities, enable SDMA.  We have to write 0x01
-		 * to the capabilities register first to unlock it.
-		 */
-		ret = pci_read_config_byte(chip->pdev, O2_SD_CAPS, &scratch);
-		if (ret)
-			return ret;
-		scratch |= 0x01;
-		pci_write_config_byte(chip->pdev, O2_SD_CAPS, scratch);
-		pci_write_config_byte(chip->pdev, O2_SD_CAPS, 0x73);
-
-		/* Disable ADMA1/2 */
-		pci_write_config_byte(chip->pdev, O2_SD_ADMA1, 0x39);
-		pci_write_config_byte(chip->pdev, O2_SD_ADMA2, 0x08);
-
-		/* Disable the infinite transfer mode */
-		ret = pci_read_config_byte(chip->pdev, O2_SD_INF_MOD, &scratch);
-		if (ret)
-			return ret;
-		scratch |= 0x08;
-		pci_write_config_byte(chip->pdev, O2_SD_INF_MOD, scratch);
-
-		/* Lock WP */
-		ret = pci_read_config_byte(chip->pdev, O2_SD_LOCK_WP, &scratch);
-		if (ret)
-			return ret;
-		scratch |= 0x80;
-		pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch);
-	}
-
-	return 0;
-}
-
 static int jmicron_pmos(struct sdhci_pci_chip *chip, int on)
 {
 	u8 scratch;
@@ -642,7 +515,10 @@ static int jmicron_resume(struct sdhci_pci_chip *chip)
 }
 
 static const struct sdhci_pci_fixes sdhci_o2 = {
-	.probe		= o2_probe,
+	.probe = sdhci_pci_o2_probe,
+	.quirks = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC,
+	.probe_slot = sdhci_pci_o2_probe_slot,
+	.resume = sdhci_pci_o2_resume,
 };
 
 static const struct sdhci_pci_fixes sdhci_jmicron = {
@@ -1055,6 +931,46 @@ static const struct pci_device_id pci_ids[] = {
 		.driver_data	= (kernel_ulong_t)&sdhci_o2,
 	},
 
+	{
+		.vendor		= PCI_VENDOR_ID_O2,
+		.device		= PCI_DEVICE_ID_O2_FUJIN2,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.driver_data	= (kernel_ulong_t)&sdhci_o2,
+	},
+
+	{
+		.vendor		= PCI_VENDOR_ID_O2,
+		.device		= PCI_DEVICE_ID_O2_SDS0,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.driver_data	= (kernel_ulong_t)&sdhci_o2,
+	},
+
+	{
+		.vendor		= PCI_VENDOR_ID_O2,
+		.device		= PCI_DEVICE_ID_O2_SDS1,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.driver_data	= (kernel_ulong_t)&sdhci_o2,
+	},
+
+	{
+		.vendor		= PCI_VENDOR_ID_O2,
+		.device		= PCI_DEVICE_ID_O2_SEABIRD0,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.driver_data	= (kernel_ulong_t)&sdhci_o2,
+	},
+
+	{
+		.vendor		= PCI_VENDOR_ID_O2,
+		.device		= PCI_DEVICE_ID_O2_SEABIRD1,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.driver_data	= (kernel_ulong_t)&sdhci_o2,
+	},
+
 	{	/* Generic SD host controller */
 		PCI_DEVICE_CLASS((PCI_CLASS_SYSTEM_SDHCI << 8), 0xFFFF00)
 	},
@@ -1457,6 +1373,15 @@ static struct sdhci_pci_slot *sdhci_pci_probe_slot(
 
 	sdhci_pci_add_own_cd(slot);
 
+	/*
+	 * Check if the chip needs a separate GPIO for card detect to wake up
+	 * from runtime suspend.  If it is not there, don't allow runtime PM.
+	 * Note sdhci_pci_add_own_cd() sets slot->cd_gpio to -EINVAL on failure.
+	 */
+	if (chip->fixes && chip->fixes->own_cd_for_runtime_pm &&
+	    !gpio_is_valid(slot->cd_gpio))
+		chip->allow_runtime_pm = false;
+
 	return slot;
 
 remove:

drivers/mmc/host/sdhci-pci.h

@@ -0,0 +1,78 @@
+#ifndef __SDHCI_PCI_H
+#define __SDHCI_PCI_H
+
+/*
+ * PCI device IDs
+ */
+
+#define PCI_DEVICE_ID_INTEL_PCH_SDIO0	0x8809
+#define PCI_DEVICE_ID_INTEL_PCH_SDIO1	0x880a
+#define PCI_DEVICE_ID_INTEL_BYT_EMMC	0x0f14
+#define PCI_DEVICE_ID_INTEL_BYT_SDIO	0x0f15
+#define PCI_DEVICE_ID_INTEL_BYT_SD	0x0f16
+#define PCI_DEVICE_ID_INTEL_BYT_EMMC2	0x0f50
+#define PCI_DEVICE_ID_INTEL_MRFL_MMC	0x1190
+#define PCI_DEVICE_ID_INTEL_CLV_SDIO0	0x08f9
+#define PCI_DEVICE_ID_INTEL_CLV_SDIO1	0x08fa
+#define PCI_DEVICE_ID_INTEL_CLV_SDIO2	0x08fb
+#define PCI_DEVICE_ID_INTEL_CLV_EMMC0	0x08e5
+#define PCI_DEVICE_ID_INTEL_CLV_EMMC1	0x08e6
+
+/*
+ * PCI registers
+ */
+
+#define PCI_SDHCI_IFPIO			0x00
+#define PCI_SDHCI_IFDMA			0x01
+#define PCI_SDHCI_IFVENDOR		0x02
+
+#define PCI_SLOT_INFO			0x40	/* 8 bits */
+#define  PCI_SLOT_INFO_SLOTS(x)		((x >> 4) & 7)
+#define  PCI_SLOT_INFO_FIRST_BAR_MASK	0x07
+
+#define MAX_SLOTS			8
+
+struct sdhci_pci_chip;
+struct sdhci_pci_slot;
+
+struct sdhci_pci_fixes {
+	unsigned int		quirks;
+	unsigned int		quirks2;
+	bool			allow_runtime_pm;
+	bool			own_cd_for_runtime_pm;
+
+	int			(*probe) (struct sdhci_pci_chip *);
+
+	int			(*probe_slot) (struct sdhci_pci_slot *);
+	void			(*remove_slot) (struct sdhci_pci_slot *, int);
+
+	int			(*suspend) (struct sdhci_pci_chip *);
+	int			(*resume) (struct sdhci_pci_chip *);
+};
+
+struct sdhci_pci_slot {
+	struct sdhci_pci_chip	*chip;
+	struct sdhci_host	*host;
+	struct sdhci_pci_data	*data;
+
+	int			pci_bar;
+	int			rst_n_gpio;
+	int			cd_gpio;
+	int			cd_irq;
+
+	void (*hw_reset)(struct sdhci_host *host);
+};
+
+struct sdhci_pci_chip {
+	struct pci_dev		*pdev;
+
+	unsigned int		quirks;
+	unsigned int		quirks2;
+	bool			allow_runtime_pm;
+	const struct sdhci_pci_fixes *fixes;
+
+	int			num_slots;	/* Slots on controller */
+	struct sdhci_pci_slot	*slots[MAX_SLOTS]; /* Pointers to host slots */
+};
+
+#endif /* __SDHCI_PCI_H */

drivers/mmc/host/sdhci-pltfm.c

@@ -237,19 +237,21 @@ int sdhci_pltfm_unregister(struct platform_device *pdev)
 EXPORT_SYMBOL_GPL(sdhci_pltfm_unregister);
 
 #ifdef CONFIG_PM
-static int sdhci_pltfm_suspend(struct device *dev)
+int sdhci_pltfm_suspend(struct device *dev)
 {
 	struct sdhci_host *host = dev_get_drvdata(dev);
 
 	return sdhci_suspend_host(host);
 }
+EXPORT_SYMBOL_GPL(sdhci_pltfm_suspend);
 
-static int sdhci_pltfm_resume(struct device *dev)
+int sdhci_pltfm_resume(struct device *dev)
 {
 	struct sdhci_host *host = dev_get_drvdata(dev);
 
 	return sdhci_resume_host(host);
 }
+EXPORT_SYMBOL_GPL(sdhci_pltfm_resume);
 
 const struct dev_pm_ops sdhci_pltfm_pmops = {
 	.suspend	= sdhci_pltfm_suspend,

drivers/mmc/host/sdhci-pltfm.h

@@ -111,6 +111,8 @@ static inline void *sdhci_pltfm_priv(struct sdhci_pltfm_host *host)
 }
 
 #ifdef CONFIG_PM
+extern int sdhci_pltfm_suspend(struct device *dev);
+extern int sdhci_pltfm_resume(struct device *dev);
 extern const struct dev_pm_ops sdhci_pltfm_pmops;
 #define SDHCI_PLTFM_PMOPS (&sdhci_pltfm_pmops)
 #else

drivers/mmc/host/sdhci-tegra.c

@@ -198,6 +198,7 @@ static struct sdhci_tegra_soc_data soc_data_tegra114 = {
 };
 
 static const struct of_device_id sdhci_tegra_dt_match[] = {
+	{ .compatible = "nvidia,tegra124-sdhci", .data = &soc_data_tegra114 },
 	{ .compatible = "nvidia,tegra114-sdhci", .data = &soc_data_tegra114 },
 	{ .compatible = "nvidia,tegra30-sdhci", .data = &soc_data_tegra30 },
 	{ .compatible = "nvidia,tegra20-sdhci", .data = &soc_data_tegra20 },

drivers/mmc/host/sdhci.c

@@ -898,8 +898,13 @@ static void sdhci_set_transfer_mode(struct sdhci_host *host,
 	u16 mode;
 	struct mmc_data *data = cmd->data;
 
-	if (data == NULL)
+	if (data == NULL) {
+		/* clear Auto CMD settings for no data CMDs */
+		mode = sdhci_readw(host, SDHCI_TRANSFER_MODE);
+		sdhci_writew(host, mode & ~(SDHCI_TRNS_AUTO_CMD12 |
+				SDHCI_TRNS_AUTO_CMD23), SDHCI_TRANSFER_MODE);
 		return;
+	}
 
 	WARN_ON(!host->data);
 
@@ -1013,7 +1018,12 @@ void sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd)
 		mdelay(1);
 	}
 
-	mod_timer(&host->timer, jiffies + 10 * HZ);
+	timeout = jiffies;
+	if (!cmd->data && cmd->cmd_timeout_ms > 9000)
+		timeout += DIV_ROUND_UP(cmd->cmd_timeout_ms, 1000) * HZ + HZ;
+	else
+		timeout += 10 * HZ;
+	mod_timer(&host->timer, timeout);
 
 	host->cmd = cmd;
 
@@ -1391,6 +1401,13 @@ static void sdhci_request(struct mmc_host *mmc, struct mmc_request *mrq)
 					mmc->card->type == MMC_TYPE_MMC ?
 					MMC_SEND_TUNING_BLOCK_HS200 :
 					MMC_SEND_TUNING_BLOCK;
+
+				/* Here we need to set the host->mrq to NULL,
+				 * in case the pending finish_tasklet
+				 * finishes it incorrectly.
+				 */
+				host->mrq = NULL;
+
 				spin_unlock_irqrestore(&host->lock, flags);
 				sdhci_execute_tuning(mmc, tuning_opcode);
 				spin_lock_irqsave(&host->lock, flags);
@@ -1845,12 +1862,12 @@ static int sdhci_execute_tuning(struct mmc_host *mmc, u32 opcode)
 	unsigned long timeout;
 	int err = 0;
 	bool requires_tuning_nonuhs = false;
+	unsigned long flags;
 
 	host = mmc_priv(mmc);
 
 	sdhci_runtime_pm_get(host);
-	disable_irq(host->irq);
-	spin_lock(&host->lock);
+	spin_lock_irqsave(&host->lock, flags);
 
 	ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2);
 
@@ -1870,15 +1887,13 @@ static int sdhci_execute_tuning(struct mmc_host *mmc, u32 opcode)
 	    requires_tuning_nonuhs)
 		ctrl |= SDHCI_CTRL_EXEC_TUNING;
 	else {
-		spin_unlock(&host->lock);
-		enable_irq(host->irq);
+		spin_unlock_irqrestore(&host->lock, flags);
 		sdhci_runtime_pm_put(host);
 		return 0;
 	}
 
 	if (host->ops->platform_execute_tuning) {
-		spin_unlock(&host->lock);
-		enable_irq(host->irq);
+		spin_unlock_irqrestore(&host->lock, flags);
 		err = host->ops->platform_execute_tuning(host, opcode);
 		sdhci_runtime_pm_put(host);
 		return err;
@@ -1951,15 +1966,12 @@ static int sdhci_execute_tuning(struct mmc_host *mmc, u32 opcode)
 		host->cmd = NULL;
 		host->mrq = NULL;
 
-		spin_unlock(&host->lock);
-		enable_irq(host->irq);
-
+		spin_unlock_irqrestore(&host->lock, flags);
 		/* Wait for Buffer Read Ready interrupt */
 		wait_event_interruptible_timeout(host->buf_ready_int,
 					(host->tuning_done == 1),
 					msecs_to_jiffies(50));
-		disable_irq(host->irq);
-		spin_lock(&host->lock);
+		spin_lock_irqsave(&host->lock, flags);
 
 		if (!host->tuning_done) {
 			pr_info(DRIVER_NAME ": Timeout waiting for "
@@ -2034,8 +2046,7 @@ out:
 		err = 0;
 
 	sdhci_clear_set_irqs(host, SDHCI_INT_DATA_AVAIL, ier);
-	spin_unlock(&host->lock);
-	enable_irq(host->irq);
+	spin_unlock_irqrestore(&host->lock, flags);
 	sdhci_runtime_pm_put(host);
 
 	return err;
@@ -3004,7 +3015,8 @@ int sdhci_add_host(struct sdhci_host *host)
 		/* SD3.0: SDR104 is supported so (for eMMC) the caps2
 		 * field can be promoted to support HS200.
 		 */
-		mmc->caps2 |= MMC_CAP2_HS200;
+		if (!(host->quirks2 & SDHCI_QUIRK2_BROKEN_HS200))
+			mmc->caps2 |= MMC_CAP2_HS200;
 	} else if (caps[1] & SDHCI_SUPPORT_SDR50)
 		mmc->caps |= MMC_CAP_UHS_SDR50;
 

drivers/mmc/host/sh_mmcif.c

@@ -381,73 +381,75 @@ static void sh_mmcif_start_dma_tx(struct sh_mmcif_host *host)
 		desc, cookie);
 }
 
-static void sh_mmcif_request_dma(struct sh_mmcif_host *host,
-				 struct sh_mmcif_plat_data *pdata)
+static struct dma_chan *
+sh_mmcif_request_dma_one(struct sh_mmcif_host *host,
+			 struct sh_mmcif_plat_data *pdata,
+			 enum dma_transfer_direction direction)
 {
-	struct resource *res = platform_get_resource(host->pd, IORESOURCE_MEM, 0);
 	struct dma_slave_config cfg;
+	struct dma_chan *chan;
+	unsigned int slave_id;
+	struct resource *res;
 	dma_cap_mask_t mask;
 	int ret;
 
-	host->dma_active = false;
-
-	if (pdata) {
-		if (pdata->slave_id_tx <= 0 || pdata->slave_id_rx <= 0)
-			return;
-	} else if (!host->pd->dev.of_node) {
-		return;
-	}
-
-	/* We can only either use DMA for both Tx and Rx or not use it at all */
 	dma_cap_zero(mask);
 	dma_cap_set(DMA_SLAVE, mask);
 
-	host->chan_tx = dma_request_slave_channel_compat(mask, shdma_chan_filter,
-				pdata ? (void *)pdata->slave_id_tx : NULL,
-				&host->pd->dev, "tx");
-	dev_dbg(&host->pd->dev, "%s: TX: got channel %p\n", __func__,
-		host->chan_tx);
+	if (pdata)
+		slave_id = direction == DMA_MEM_TO_DEV
+			 ? pdata->slave_id_tx : pdata->slave_id_rx;
+	else
+		slave_id = 0;
 
-	if (!host->chan_tx)
-		return;
+	chan = dma_request_slave_channel_compat(mask, shdma_chan_filter,
+				(void *)(unsigned long)slave_id, &host->pd->dev,
+				direction == DMA_MEM_TO_DEV ? "tx" : "rx");
+
+	dev_dbg(&host->pd->dev, "%s: %s: got channel %p\n", __func__,
+		direction == DMA_MEM_TO_DEV ? "TX" : "RX", chan);
+
+	if (!chan)
+		return NULL;
+
+	res = platform_get_resource(host->pd, IORESOURCE_MEM, 0);
 
 	/* In the OF case the driver will get the slave ID from the DT */
-	if (pdata)
-		cfg.slave_id = pdata->slave_id_tx;
-	cfg.direction = DMA_MEM_TO_DEV;
+	cfg.slave_id = slave_id;
+	cfg.direction = direction;
 	cfg.dst_addr = res->start + MMCIF_CE_DATA;
 	cfg.src_addr = 0;
-	ret = dmaengine_slave_config(host->chan_tx, &cfg);
-	if (ret < 0)
-		goto ecfgtx;
+	ret = dmaengine_slave_config(chan, &cfg);
+	if (ret < 0) {
+		dma_release_channel(chan);
+		return NULL;
+	}
 
-	host->chan_rx = dma_request_slave_channel_compat(mask, shdma_chan_filter,
-				pdata ? (void *)pdata->slave_id_rx : NULL,
-				&host->pd->dev, "rx");
-	dev_dbg(&host->pd->dev, "%s: RX: got channel %p\n", __func__,
-		host->chan_rx);
+	return chan;
+}
 
-	if (!host->chan_rx)
-		goto erqrx;
+static void sh_mmcif_request_dma(struct sh_mmcif_host *host,
+				 struct sh_mmcif_plat_data *pdata)
+{
+	host->dma_active = false;
 
-	if (pdata)
-		cfg.slave_id = pdata->slave_id_rx;
-	cfg.direction = DMA_DEV_TO_MEM;
-	cfg.dst_addr = 0;
-	cfg.src_addr = res->start + MMCIF_CE_DATA;
-	ret = dmaengine_slave_config(host->chan_rx, &cfg);
-	if (ret < 0)
-		goto ecfgrx;
+	if (pdata) {
+		if (pdata->slave_id_tx <= 0 || pdata->slave_id_rx <= 0)
+			return;
+	} else if (!host->pd->dev.of_node) {
+		return;
+	}
 
-	return;
+	/* We can only either use DMA for both Tx and Rx or not use it at all */
+	host->chan_tx = sh_mmcif_request_dma_one(host, pdata, DMA_MEM_TO_DEV);
+	if (!host->chan_tx)
+		return;
 
-ecfgrx:
-	dma_release_channel(host->chan_rx);
-	host->chan_rx = NULL;
-erqrx:
-ecfgtx:
-	dma_release_channel(host->chan_tx);
-	host->chan_tx = NULL;
+	host->chan_rx = sh_mmcif_request_dma_one(host, pdata, DMA_DEV_TO_MEM);
+	if (!host->chan_rx) {
+		dma_release_channel(host->chan_tx);
+		host->chan_tx = NULL;
+	}
 }
 
 static void sh_mmcif_release_dma(struct sh_mmcif_host *host)

drivers/mmc/host/sh_mobile_sdhi.c

@@ -33,6 +33,8 @@
 
 #include "tmio_mmc.h"
 
+#define EXT_ACC           0xe4
+
 struct sh_mobile_sdhi_of_data {
 	unsigned long tmio_flags;
 };
@@ -54,7 +56,7 @@ static int sh_mobile_sdhi_clk_enable(struct platform_device *pdev, unsigned int
 	struct mmc_host *mmc = platform_get_drvdata(pdev);
 	struct tmio_mmc_host *host = mmc_priv(mmc);
 	struct sh_mobile_sdhi *priv = container_of(host->pdata, struct sh_mobile_sdhi, mmc_data);
-	int ret = clk_enable(priv->clk);
+	int ret = clk_prepare_enable(priv->clk);
 	if (ret < 0)
 		return ret;
 
@@ -67,7 +69,7 @@ static void sh_mobile_sdhi_clk_disable(struct platform_device *pdev)
 	struct mmc_host *mmc = platform_get_drvdata(pdev);
 	struct tmio_mmc_host *host = mmc_priv(mmc);
 	struct sh_mobile_sdhi *priv = container_of(host->pdata, struct sh_mobile_sdhi, mmc_data);
-	clk_disable(priv->clk);
+	clk_disable_unprepare(priv->clk);
 }
 
 static int sh_mobile_sdhi_wait_idle(struct tmio_mmc_host *host)
@@ -133,9 +135,15 @@ static int sh_mobile_sdhi_probe(struct platform_device *pdev)
 	struct tmio_mmc_data *mmc_data;
 	struct sh_mobile_sdhi_info *p = pdev->dev.platform_data;
 	struct tmio_mmc_host *host;
+	struct resource *res;
 	int irq, ret, i = 0;
 	bool multiplexed_isr = true;
 	struct tmio_mmc_dma *dma_priv;
+	u16 ver;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res)
+		return -EINVAL;
 
 	priv = devm_kzalloc(&pdev->dev, sizeof(struct sh_mobile_sdhi), GFP_KERNEL);
 	if (priv == NULL) {
@@ -206,10 +214,21 @@ static int sh_mobile_sdhi_probe(struct platform_device *pdev)
 		mmc_data->flags |= of_data->tmio_flags;
 	}
 
+	/* SD control register space size is 0x100, 0x200 for bus_shift=1 */
+	mmc_data->bus_shift = resource_size(res) >> 9;
+
 	ret = tmio_mmc_host_probe(&host, pdev, mmc_data);
 	if (ret < 0)
 		goto eprobe;
 
+	/*
+	 * FIXME:
+	 * this Workaround can be more clever method
+	 */
+	ver = sd_ctrl_read16(host, CTL_VERSION);
+	if (ver == 0xCB0D)
+		sd_ctrl_write16(host, EXT_ACC, 1);
+
 	/*
 	 * Allow one or more specific (named) ISRs or
 	 * one or more multiplexed (un-named) ISRs.

drivers/mmc/host/tmio_mmc.c

@@ -62,6 +62,7 @@ static int tmio_mmc_probe(struct platform_device *pdev)
 	const struct mfd_cell *cell = mfd_get_cell(pdev);
 	struct tmio_mmc_data *pdata;
 	struct tmio_mmc_host *host;
+	struct resource *res;
 	int ret = -EINVAL, irq;
 
 	if (pdev->num_resources != 2)
@@ -84,6 +85,14 @@ static int tmio_mmc_probe(struct platform_device *pdev)
 			goto out;
 	}
 
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res)
+		return -EINVAL;
+
+	/* SD control register space size is 0x200, 0x400 for bus_shift=1 */
+	pdata->bus_shift = resource_size(res) >> 10;
+	pdata->flags |= TMIO_MMC_HAVE_HIGH_REG;
+
 	ret = tmio_mmc_host_probe(&host, pdev, pdata);
 	if (ret)
 		goto cell_disable;

drivers/mmc/host/tmio_mmc.h

@@ -58,7 +58,6 @@ enum tmio_mmc_power {
 
 struct tmio_mmc_host {
 	void __iomem *ctl;
-	unsigned long bus_shift;
 	struct mmc_command      *cmd;
 	struct mmc_request      *mrq;
 	struct mmc_data         *data;
@@ -176,19 +175,19 @@ int tmio_mmc_host_runtime_resume(struct device *dev);
 
 static inline u16 sd_ctrl_read16(struct tmio_mmc_host *host, int addr)
 {
-	return readw(host->ctl + (addr << host->bus_shift));
+	return readw(host->ctl + (addr << host->pdata->bus_shift));
 }
 
 static inline void sd_ctrl_read16_rep(struct tmio_mmc_host *host, int addr,
 		u16 *buf, int count)
 {
-	readsw(host->ctl + (addr << host->bus_shift), buf, count);
+	readsw(host->ctl + (addr << host->pdata->bus_shift), buf, count);
 }
 
 static inline u32 sd_ctrl_read32(struct tmio_mmc_host *host, int addr)
 {
-	return readw(host->ctl + (addr << host->bus_shift)) |
-	       readw(host->ctl + ((addr + 2) << host->bus_shift)) << 16;
+	return readw(host->ctl + (addr << host->pdata->bus_shift)) |
+	       readw(host->ctl + ((addr + 2) << host->pdata->bus_shift)) << 16;
 }
 
 static inline void sd_ctrl_write16(struct tmio_mmc_host *host, int addr, u16 val)
@@ -198,19 +197,19 @@ static inline void sd_ctrl_write16(struct tmio_mmc_host *host, int addr, u16 val
 	 */
 	if (host->pdata->write16_hook && host->pdata->write16_hook(host, addr))
 		return;
-	writew(val, host->ctl + (addr << host->bus_shift));
+	writew(val, host->ctl + (addr << host->pdata->bus_shift));
 }
 
 static inline void sd_ctrl_write16_rep(struct tmio_mmc_host *host, int addr,
 		u16 *buf, int count)
 {
-	writesw(host->ctl + (addr << host->bus_shift), buf, count);
+	writesw(host->ctl + (addr << host->pdata->bus_shift), buf, count);
 }
 
 static inline void sd_ctrl_write32(struct tmio_mmc_host *host, int addr, u32 val)
 {
-	writew(val, host->ctl + (addr << host->bus_shift));
-	writew(val >> 16, host->ctl + ((addr + 2) << host->bus_shift));
+	writew(val, host->ctl + (addr << host->pdata->bus_shift));
+	writew(val >> 16, host->ctl + ((addr + 2) << host->pdata->bus_shift));
 }
 
 

drivers/mmc/host/tmio_mmc_dma.c

@@ -293,7 +293,7 @@ void tmio_mmc_request_dma(struct tmio_mmc_host *host, struct tmio_mmc_data *pdat
 		if (pdata->dma->chan_priv_tx)
 			cfg.slave_id = pdata->dma->slave_id_tx;
 		cfg.direction = DMA_MEM_TO_DEV;
-		cfg.dst_addr = res->start + (CTL_SD_DATA_PORT << host->bus_shift);
+		cfg.dst_addr = res->start + (CTL_SD_DATA_PORT << host->pdata->bus_shift);
 		cfg.src_addr = 0;
 		ret = dmaengine_slave_config(host->chan_tx, &cfg);
 		if (ret < 0)

drivers/mmc/host/tmio_mmc_pio.c

@@ -161,10 +161,8 @@ static void tmio_mmc_set_clock(struct tmio_mmc_host *host, int new_clock)
 
 static void tmio_mmc_clk_stop(struct tmio_mmc_host *host)
 {
-	struct resource *res = platform_get_resource(host->pdev, IORESOURCE_MEM, 0);
-
 	/* implicit BUG_ON(!res) */
-	if (resource_size(res) > 0x100) {
+	if (host->pdata->flags & TMIO_MMC_HAVE_HIGH_REG) {
 		sd_ctrl_write16(host, CTL_CLK_AND_WAIT_CTL, 0x0000);
 		msleep(10);
 	}
@@ -176,14 +174,12 @@ static void tmio_mmc_clk_stop(struct tmio_mmc_host *host)
 
 static void tmio_mmc_clk_start(struct tmio_mmc_host *host)
 {
-	struct resource *res = platform_get_resource(host->pdev, IORESOURCE_MEM, 0);
-
 	sd_ctrl_write16(host, CTL_SD_CARD_CLK_CTL, 0x0100 |
 		sd_ctrl_read16(host, CTL_SD_CARD_CLK_CTL));
 	msleep(10);
 
 	/* implicit BUG_ON(!res) */
-	if (resource_size(res) > 0x100) {
+	if (host->pdata->flags & TMIO_MMC_HAVE_HIGH_REG) {
 		sd_ctrl_write16(host, CTL_CLK_AND_WAIT_CTL, 0x0100);
 		msleep(10);
 	}
@@ -191,16 +187,14 @@ static void tmio_mmc_clk_start(struct tmio_mmc_host *host)
 
 static void tmio_mmc_reset(struct tmio_mmc_host *host)
 {
-	struct resource *res = platform_get_resource(host->pdev, IORESOURCE_MEM, 0);
-
 	/* FIXME - should we set stop clock reg here */
 	sd_ctrl_write16(host, CTL_RESET_SD, 0x0000);
 	/* implicit BUG_ON(!res) */
-	if (resource_size(res) > 0x100)
+	if (host->pdata->flags & TMIO_MMC_HAVE_HIGH_REG)
 		sd_ctrl_write16(host, CTL_RESET_SDIO, 0x0000);
 	msleep(10);
 	sd_ctrl_write16(host, CTL_RESET_SD, 0x0001);
-	if (resource_size(res) > 0x100)
+	if (host->pdata->flags & TMIO_MMC_HAVE_HIGH_REG)
 		sd_ctrl_write16(host, CTL_RESET_SDIO, 0x0001);
 	msleep(10);
 }
@@ -944,17 +938,25 @@ static const struct mmc_host_ops tmio_mmc_ops = {
 	.enable_sdio_irq = tmio_mmc_enable_sdio_irq,
 };
 
-static void tmio_mmc_init_ocr(struct tmio_mmc_host *host)
+static int tmio_mmc_init_ocr(struct tmio_mmc_host *host)
 {
 	struct tmio_mmc_data *pdata = host->pdata;
 	struct mmc_host *mmc = host->mmc;
 
 	mmc_regulator_get_supply(mmc);
 
+	/* use ocr_mask if no regulator */
 	if (!mmc->ocr_avail)
-		mmc->ocr_avail = pdata->ocr_mask ? : MMC_VDD_32_33 | MMC_VDD_33_34;
-	else if (pdata->ocr_mask)
-		dev_warn(mmc_dev(mmc), "Platform OCR mask is ignored\n");
+		mmc->ocr_avail =  pdata->ocr_mask;
+
+	/*
+	 * try again.
+	 * There is possibility that regulator has not been probed
+	 */
+	if (!mmc->ocr_avail)
+		return -EPROBE_DEFER;
+
+	return 0;
 }
 
 static void tmio_mmc_of_parse(struct platform_device *pdev,
@@ -1005,8 +1007,9 @@ int tmio_mmc_host_probe(struct tmio_mmc_host **host,
 	_host->set_pwr = pdata->set_pwr;
 	_host->set_clk_div = pdata->set_clk_div;
 
-	/* SD control register space size is 0x200, 0x400 for bus_shift=1 */
-	_host->bus_shift = resource_size(res_ctl) >> 10;
+	ret = tmio_mmc_init_ocr(_host);
+	if (ret < 0)
+		goto host_free;
 
 	_host->ctl = ioremap(res_ctl->start, resource_size(res_ctl));
 	if (!_host->ctl) {
@@ -1016,14 +1019,13 @@ int tmio_mmc_host_probe(struct tmio_mmc_host **host,
 
 	mmc->ops = &tmio_mmc_ops;
 	mmc->caps |= MMC_CAP_4_BIT_DATA | pdata->capabilities;
-	mmc->caps2 = pdata->capabilities2;
+	mmc->caps2 |= pdata->capabilities2;
 	mmc->max_segs = 32;
 	mmc->max_blk_size = 512;
 	mmc->max_blk_count = (PAGE_CACHE_SIZE / mmc->max_blk_size) *
 		mmc->max_segs;
 	mmc->max_req_size = mmc->max_blk_size * mmc->max_blk_count;
 	mmc->max_seg_size = mmc->max_req_size;
-	tmio_mmc_init_ocr(_host);
 
 	_host->native_hotplug = !(pdata->flags & TMIO_MMC_USE_GPIO_CD ||
 				  mmc->caps & MMC_CAP_NEEDS_POLL ||

include/linux/mfd/tmio.h

@@ -76,6 +76,13 @@
  */
 #define TMIO_MMC_USE_GPIO_CD		(1 << 5)
 
+/*
+ * Some controllers doesn't have over 0x100 register.
+ * it is used to checking accessibility of
+ * CTL_SD_CARD_CLK_CTL / CTL_CLK_AND_WAIT_CTL
+ */
+#define TMIO_MMC_HAVE_HIGH_REG		(1 << 6)
+
 int tmio_core_mmc_enable(void __iomem *cnf, int shift, unsigned long base);
 int tmio_core_mmc_resume(void __iomem *cnf, int shift, unsigned long base);
 void tmio_core_mmc_pwr(void __iomem *cnf, int shift, int state);
@@ -102,6 +109,7 @@ struct tmio_mmc_data {
 	unsigned long			capabilities;
 	unsigned long			capabilities2;
 	unsigned long			flags;
+	unsigned long			bus_shift;
 	u32				ocr_mask;	/* available voltages */
 	struct tmio_mmc_dma		*dma;
 	struct device			*dev;

include/linux/mmc/card.h

@@ -271,9 +271,10 @@ struct mmc_card {
 #define MMC_QUIRK_INAND_CMD38	(1<<6)		/* iNAND devices have broken CMD38 */
 #define MMC_QUIRK_BLK_NO_CMD23	(1<<7)		/* Avoid CMD23 for regular multiblock */
 #define MMC_QUIRK_BROKEN_BYTE_MODE_512 (1<<8)	/* Avoid sending 512 bytes in */
+						/* byte mode */
 #define MMC_QUIRK_LONG_READ_TIME (1<<9)		/* Data read time > CSD says */
 #define MMC_QUIRK_SEC_ERASE_TRIM_BROKEN (1<<10)	/* Skip secure for erase/trim */
-						/* byte mode */
+#define MMC_QUIRK_BROKEN_IRQ_POLLING	(1<<11)	/* Polling SDIO_CCCR_INTx could create a fake interrupt */
 
 	unsigned int		erase_size;	/* erase size in sectors */
  	unsigned int		erase_shift;	/* if erase unit is power 2 */
@@ -505,6 +506,11 @@ static inline int mmc_card_long_read_time(const struct mmc_card *c)
 	return c->quirks & MMC_QUIRK_LONG_READ_TIME;
 }
 
+static inline int mmc_card_broken_irq_polling(const struct mmc_card *c)
+{
+	return c->quirks & MMC_QUIRK_BROKEN_IRQ_POLLING;
+}
+
 #define mmc_card_name(c)	((c)->cid.prod_name)
 #define mmc_card_id(c)		(dev_name(&(c)->dev))
 

include/linux/mmc/sdhci.h

@@ -98,6 +98,8 @@ struct sdhci_host {
 #define SDHCI_QUIRK2_CARD_ON_NEEDS_BUS_ON		(1<<4)
 /* Controller has a non-standard host control register */
 #define SDHCI_QUIRK2_BROKEN_HOST_CONTROL		(1<<5)
+/* Controller does not support HS200 */
+#define SDHCI_QUIRK2_BROKEN_HS200			(1<<6)
 
 	int irq;		/* Device IRQ */
 	void __iomem *ioaddr;	/* Mapped address */

include/linux/mmc/tmio.h

@@ -33,6 +33,7 @@
 #define CTL_SDIO_IRQ_MASK 0x38
 #define CTL_DMA_ENABLE 0xd8
 #define CTL_RESET_SD 0xe0
+#define CTL_VERSION 0xe2
 #define CTL_SDIO_REGS 0x100
 #define CTL_CLK_AND_WAIT_CTL 0x138
 #define CTL_RESET_SDIO 0x1e0