Merge remote-tracking branches 'spi/topic/sun4i', 'spi/topic/topcliff-pch' and 'spi/topic/zynq' into spi-next

drivers/spi/Kconfig

@@ -585,7 +585,7 @@ config SPI_TEGRA20_SLINK
 
 config SPI_TOPCLIFF_PCH
 	tristate "Intel EG20T PCH/LAPIS Semicon IOH(ML7213/ML7223/ML7831) SPI"
-	depends on PCI && (X86_32 || COMPILE_TEST)
+	depends on PCI && (X86_32 || MIPS || COMPILE_TEST)
 	help
 	  SPI driver for the Topcliff PCH (Platform Controller Hub) SPI bus
 	  used in some x86 embedded processors.

drivers/spi/spi-sun4i.c

@@ -229,8 +229,8 @@ static int sun4i_spi_transfer_one(struct spi_master *master,
 
 	/* Ensure that we have a parent clock fast enough */
 	mclk_rate = clk_get_rate(sspi->mclk);
-	if (mclk_rate < (2 * spi->max_speed_hz)) {
-		clk_set_rate(sspi->mclk, 2 * spi->max_speed_hz);
+	if (mclk_rate < (2 * tfr->speed_hz)) {
+		clk_set_rate(sspi->mclk, 2 * tfr->speed_hz);
 		mclk_rate = clk_get_rate(sspi->mclk);
 	}
 
@@ -248,14 +248,14 @@ static int sun4i_spi_transfer_one(struct spi_master *master,
 	 * First try CDR2, and if we can't reach the expected
 	 * frequency, fall back to CDR1.
 	 */
-	div = mclk_rate / (2 * spi->max_speed_hz);
+	div = mclk_rate / (2 * tfr->speed_hz);
 	if (div <= (SUN4I_CLK_CTL_CDR2_MASK + 1)) {
 		if (div > 0)
 			div--;
 
 		reg = SUN4I_CLK_CTL_CDR2(div) | SUN4I_CLK_CTL_DRS;
 	} else {
-		div = ilog2(mclk_rate) - ilog2(spi->max_speed_hz);
+		div = ilog2(mclk_rate) - ilog2(tfr->speed_hz);
 		reg = SUN4I_CLK_CTL_CDR1(div);
 	}
 

drivers/spi/spi-sun6i.c

@@ -217,8 +217,8 @@ static int sun6i_spi_transfer_one(struct spi_master *master,
 
 	/* Ensure that we have a parent clock fast enough */
 	mclk_rate = clk_get_rate(sspi->mclk);
-	if (mclk_rate < (2 * spi->max_speed_hz)) {
-		clk_set_rate(sspi->mclk, 2 * spi->max_speed_hz);
+	if (mclk_rate < (2 * tfr->speed_hz)) {
+		clk_set_rate(sspi->mclk, 2 * tfr->speed_hz);
 		mclk_rate = clk_get_rate(sspi->mclk);
 	}
 
@@ -236,14 +236,14 @@ static int sun6i_spi_transfer_one(struct spi_master *master,
 	 * First try CDR2, and if we can't reach the expected
 	 * frequency, fall back to CDR1.
 	 */
-	div = mclk_rate / (2 * spi->max_speed_hz);
+	div = mclk_rate / (2 * tfr->speed_hz);
 	if (div <= (SUN6I_CLK_CTL_CDR2_MASK + 1)) {
 		if (div > 0)
 			div--;
 
 		reg = SUN6I_CLK_CTL_CDR2(div) | SUN6I_CLK_CTL_DRS;
 	} else {
-		div = ilog2(mclk_rate) - ilog2(spi->max_speed_hz);
+		div = ilog2(mclk_rate) - ilog2(tfr->speed_hz);
 		reg = SUN6I_CLK_CTL_CDR1(div);
 	}
 

drivers/spi/spi-zynqmp-gqspi.c

@@ -917,9 +917,7 @@ static int zynqmp_qspi_start_transfer(struct spi_master *master,
  */
 static int __maybe_unused zynqmp_qspi_suspend(struct device *dev)
 {
-	struct platform_device *pdev = container_of(dev,
-						    struct platform_device,
-						    dev);
+	struct platform_device *pdev = to_platform_device(dev);
 	struct spi_master *master = platform_get_drvdata(pdev);
 
 	spi_master_suspend(master);
@@ -940,9 +938,7 @@ static int __maybe_unused zynqmp_qspi_suspend(struct device *dev)
  */
 static int __maybe_unused zynqmp_qspi_resume(struct device *dev)
 {
-	struct platform_device *pdev = container_of(dev,
-						    struct platform_device,
-						    dev);
+	struct platform_device *pdev = to_platform_device(dev);
 	struct spi_master *master = platform_get_drvdata(pdev);
 	struct zynqmp_qspi *xqspi = spi_master_get_devdata(master);
 	int ret = 0;