Merge branch 'topic/core-fixes' into for-next

.mailmap

@@ -21,6 +21,7 @@ Andrey Ryabinin <ryabinin.a.a@gmail.com> <a.ryabinin@samsung.com>
 Andrew Morton <akpm@linux-foundation.org>
 Andrew Vasquez <andrew.vasquez@qlogic.com>
 Andy Adamson <andros@citi.umich.edu>
+Antonio Ospite <ao2@ao2.it> <ao2@amarulasolutions.com>
 Archit Taneja <archit@ti.com>
 Arnaud Patard <arnaud.patard@rtp-net.org>
 Arnd Bergmann <arnd@arndb.de>

Documentation/Intel-IOMMU.txt

@@ -3,7 +3,7 @@ Linux IOMMU Support
 
 The architecture spec can be obtained from the below location.
 
-http://www.intel.com/technology/virtualization/
+http://www.intel.com/content/dam/www/public/us/en/documents/product-specifications/vt-directed-io-spec.pdf
 
 This guide gives a quick cheat sheet for some basic understanding.
 

Documentation/cgroup-v2.txt

@@ -843,6 +843,10 @@ PAGE_SIZE multiple when read back.
 		Amount of memory used to cache filesystem data,
 		including tmpfs and shared memory.
 
+	  sock
+
+		Amount of memory used in network transmission buffers
+
 	  file_mapped
 
 		Amount of cached filesystem data mapped with mmap()

Documentation/devicetree/bindings/net/brcm,bcmgenet.txt

@@ -68,7 +68,7 @@ ethernet@f0b60000 {
 		phy1: ethernet-phy@1 {
 			max-speed = <1000>;
 			reg = <0x1>;
-			compatible = "brcm,28nm-gphy", "ethernet-phy-ieee802.3-c22";
+			compatible = "ethernet-phy-ieee802.3-c22";
 		};
 	};
 };
@@ -115,7 +115,7 @@ ethernet@f0ba0000 {
 		phy0: ethernet-phy@0 {
 			max-speed = <1000>;
 			reg = <0x0>;
-			compatible = "brcm,bcm53125", "ethernet-phy-ieee802.3-c22";
+			compatible = "ethernet-phy-ieee802.3-c22";
 		};
 	};
 };

Documentation/devicetree/bindings/net/hisilicon-hns-dsaf.txt

@@ -4,8 +4,6 @@ Required properties:
 - compatible: should be "hisilicon,hns-dsaf-v1" or "hisilicon,hns-dsaf-v2".
   "hisilicon,hns-dsaf-v1" is for hip05.
   "hisilicon,hns-dsaf-v2" is for Hi1610 and Hi1612.
-- dsa-name: dsa fabric name who provide this interface.
-  should be "dsafX", X is the dsaf id.
 - mode: dsa fabric mode string. only support one of dsaf modes like these:
 		"2port-64vf",
 		"6port-16rss",
@@ -26,9 +24,8 @@ Required properties:
 
 Example:
 
-dsa: dsa@c7000000 {
+dsaf0: dsa@c7000000 {
 	compatible = "hisilicon,hns-dsaf-v1";
-	dsa_name = "dsaf0";
 	mode = "6port-16rss";
 	interrupt-parent = <&mbigen_dsa>;
 	reg = <0x0 0xC0000000 0x0 0x420000

Documentation/devicetree/bindings/net/hisilicon-hns-nic.txt

@@ -4,8 +4,9 @@ Required properties:
 - compatible: "hisilicon,hns-nic-v1" or "hisilicon,hns-nic-v2".
   "hisilicon,hns-nic-v1" is for hip05.
   "hisilicon,hns-nic-v2" is for Hi1610 and Hi1612.
-- ae-name: accelerator name who provides this interface,
-  is simply a name referring to the name of name in the accelerator node.
+- ae-handle: accelerator engine handle for hns,
+  specifies a reference to the associating hardware driver node.
+  see Documentation/devicetree/bindings/net/hisilicon-hns-dsaf.txt
 - port-id: is the index of port provided by DSAF (the accelerator). DSAF can
   connect to 8 PHYs. Port 0 to 1 are both used for adminstration purpose. They
   are called debug ports.
@@ -41,7 +42,7 @@ Example:
 
 	ethernet@0{
 		compatible = "hisilicon,hns-nic-v1";
-		ae-name = "dsaf0";
+		ae-handle = <&dsaf0>;
 		port-id = <0>;
 		local-mac-address = [a2 14 e4 4b 56 76];
 	};

Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt

@@ -6,12 +6,17 @@ Required properties:
 - interrupts: interrupt for the device
 - phy: See ethernet.txt file in the same directory.
 - phy-mode: See ethernet.txt file in the same directory
-- clocks: a pointer to the reference clock for this device.
+- clocks: List of clocks for this device. At least one clock is
+  mandatory for the core clock. If several clocks are given, then the
+  clock-names property must be used to identify them.
 
 Optional properties:
 - tx-csum-limit: maximum mtu supported by port that allow TX checksum.
   Value is presented in bytes. If not used, by default 1600B is set for
   "marvell,armada-370-neta" and 9800B for others.
+- clock-names: List of names corresponding to clocks property; shall be
+  "core" for core clock and "bus" for the optional bus clock.
+
 
 Example:
 

Documentation/devicetree/bindings/net/mdio-mux-gpio.txt

@@ -38,7 +38,6 @@ Example :
 
 			phy11: ethernet-phy@1 {
 				reg = <1>;
-				compatible = "marvell,88e1149r";
 				marvell,reg-init = <3 0x10 0 0x5777>,
 					<3 0x11 0 0x00aa>,
 					<3 0x12 0 0x4105>,
@@ -48,7 +47,6 @@ Example :
 			};
 			phy12: ethernet-phy@2 {
 				reg = <2>;
-				compatible = "marvell,88e1149r";
 				marvell,reg-init = <3 0x10 0 0x5777>,
 					<3 0x11 0 0x00aa>,
 					<3 0x12 0 0x4105>,
@@ -58,7 +56,6 @@ Example :
 			};
 			phy13: ethernet-phy@3 {
 				reg = <3>;
-				compatible = "marvell,88e1149r";
 				marvell,reg-init = <3 0x10 0 0x5777>,
 					<3 0x11 0 0x00aa>,
 					<3 0x12 0 0x4105>,
@@ -68,7 +65,6 @@ Example :
 			};
 			phy14: ethernet-phy@4 {
 				reg = <4>;
-				compatible = "marvell,88e1149r";
 				marvell,reg-init = <3 0x10 0 0x5777>,
 					<3 0x11 0 0x00aa>,
 					<3 0x12 0 0x4105>,
@@ -85,7 +81,6 @@ Example :
 
 			phy21: ethernet-phy@1 {
 				reg = <1>;
-				compatible = "marvell,88e1149r";
 				marvell,reg-init = <3 0x10 0 0x5777>,
 					<3 0x11 0 0x00aa>,
 					<3 0x12 0 0x4105>,
@@ -95,7 +90,6 @@ Example :
 			};
 			phy22: ethernet-phy@2 {
 				reg = <2>;
-				compatible = "marvell,88e1149r";
 				marvell,reg-init = <3 0x10 0 0x5777>,
 					<3 0x11 0 0x00aa>,
 					<3 0x12 0 0x4105>,
@@ -105,7 +99,6 @@ Example :
 			};
 			phy23: ethernet-phy@3 {
 				reg = <3>;
-				compatible = "marvell,88e1149r";
 				marvell,reg-init = <3 0x10 0 0x5777>,
 					<3 0x11 0 0x00aa>,
 					<3 0x12 0 0x4105>,
@@ -115,7 +108,6 @@ Example :
 			};
 			phy24: ethernet-phy@4 {
 				reg = <4>;
-				compatible = "marvell,88e1149r";
 				marvell,reg-init = <3 0x10 0 0x5777>,
 					<3 0x11 0 0x00aa>,
 					<3 0x12 0 0x4105>,

Documentation/devicetree/bindings/net/mdio-mux.txt

@@ -47,7 +47,6 @@ Example :
 
 			phy11: ethernet-phy@1 {
 				reg = <1>;
-				compatible = "marvell,88e1149r";
 				marvell,reg-init = <3 0x10 0 0x5777>,
 					<3 0x11 0 0x00aa>,
 					<3 0x12 0 0x4105>,
@@ -57,7 +56,6 @@ Example :
 			};
 			phy12: ethernet-phy@2 {
 				reg = <2>;
-				compatible = "marvell,88e1149r";
 				marvell,reg-init = <3 0x10 0 0x5777>,
 					<3 0x11 0 0x00aa>,
 					<3 0x12 0 0x4105>,
@@ -67,7 +65,6 @@ Example :
 			};
 			phy13: ethernet-phy@3 {
 				reg = <3>;
-				compatible = "marvell,88e1149r";
 				marvell,reg-init = <3 0x10 0 0x5777>,
 					<3 0x11 0 0x00aa>,
 					<3 0x12 0 0x4105>,
@@ -77,7 +74,6 @@ Example :
 			};
 			phy14: ethernet-phy@4 {
 				reg = <4>;
-				compatible = "marvell,88e1149r";
 				marvell,reg-init = <3 0x10 0 0x5777>,
 					<3 0x11 0 0x00aa>,
 					<3 0x12 0 0x4105>,
@@ -94,7 +90,6 @@ Example :
 
 			phy21: ethernet-phy@1 {
 				reg = <1>;
-				compatible = "marvell,88e1149r";
 				marvell,reg-init = <3 0x10 0 0x5777>,
 					<3 0x11 0 0x00aa>,
 					<3 0x12 0 0x4105>,
@@ -104,7 +99,6 @@ Example :
 			};
 			phy22: ethernet-phy@2 {
 				reg = <2>;
-				compatible = "marvell,88e1149r";
 				marvell,reg-init = <3 0x10 0 0x5777>,
 					<3 0x11 0 0x00aa>,
 					<3 0x12 0 0x4105>,
@@ -114,7 +108,6 @@ Example :
 			};
 			phy23: ethernet-phy@3 {
 				reg = <3>;
-				compatible = "marvell,88e1149r";
 				marvell,reg-init = <3 0x10 0 0x5777>,
 					<3 0x11 0 0x00aa>,
 					<3 0x12 0 0x4105>,
@@ -124,7 +117,6 @@ Example :
 			};
 			phy24: ethernet-phy@4 {
 				reg = <4>;
-				compatible = "marvell,88e1149r";
 				marvell,reg-init = <3 0x10 0 0x5777>,
 					<3 0x11 0 0x00aa>,
 					<3 0x12 0 0x4105>,

Documentation/devicetree/bindings/net/phy.txt

@@ -17,8 +17,7 @@ Optional Properties:
   "ethernet-phy-ieee802.3-c22" or "ethernet-phy-ieee802.3-c45" for
   PHYs that implement IEEE802.3 clause 22 or IEEE802.3 clause 45
   specifications. If neither of these are specified, the default is to
-  assume clause 22. The compatible list may also contain other
-  elements.
+  assume clause 22.
 
   If the phy's identifier is known then the list may contain an entry
   of the form: "ethernet-phy-idAAAA.BBBB" where
@@ -28,6 +27,9 @@ Optional Properties:
             4 hex digits. This is the chip vendor OUI bits 19:24,
             followed by 10 bits of a vendor specific ID.
 
+  The compatible list should not contain other values than those
+  listed here.
+
 - max-speed: Maximum PHY supported speed (10, 100, 1000...)
 
 - broken-turn-around: If set, indicates the PHY device does not correctly

Documentation/filesystems/proc.txt

@@ -240,8 +240,8 @@ Table 1-2: Contents of the status files (as of 4.1)
  RssFile                     size of resident file mappings
  RssShmem                    size of resident shmem memory (includes SysV shm,
                              mapping of tmpfs and shared anonymous mappings)
- VmData                      size of data, stack, and text segments
- VmStk                       size of data, stack, and text segments
+ VmData                      size of private data segments
+ VmStk                       size of stack segments
  VmExe                       size of text segment
  VmLib                       size of shared library code
  VmPTE                       size of page table entries
@@ -356,7 +356,7 @@ address           perms offset  dev   inode      pathname
 a7cb1000-a7cb2000 ---p 00000000 00:00 0
 a7cb2000-a7eb2000 rw-p 00000000 00:00 0
 a7eb2000-a7eb3000 ---p 00000000 00:00 0
-a7eb3000-a7ed5000 rw-p 00000000 00:00 0          [stack:1001]
+a7eb3000-a7ed5000 rw-p 00000000 00:00 0
 a7ed5000-a8008000 r-xp 00000000 03:00 4222       /lib/libc.so.6
 a8008000-a800a000 r--p 00133000 03:00 4222       /lib/libc.so.6
 a800a000-a800b000 rw-p 00135000 03:00 4222       /lib/libc.so.6
@@ -388,7 +388,6 @@ is not associated with a file:
 
  [heap]                   = the heap of the program
  [stack]                  = the stack of the main process
- [stack:1001]             = the stack of the thread with tid 1001
  [vdso]                   = the "virtual dynamic shared object",
                             the kernel system call handler
 
@@ -396,10 +395,8 @@ is not associated with a file:
 
 The /proc/PID/task/TID/maps is a view of the virtual memory from the viewpoint
 of the individual tasks of a process. In this file you will see a mapping marked
-as [stack] if that task sees it as a stack. This is a key difference from the
-content of /proc/PID/maps, where you will see all mappings that are being used
-as stack by all of those tasks. Hence, for the example above, the task-level
-map, i.e. /proc/PID/task/TID/maps for thread 1001 will look like this:
+as [stack] if that task sees it as a stack. Hence, for the example above, the
+task-level map, i.e. /proc/PID/task/TID/maps for thread 1001 will look like this:
 
 08048000-08049000 r-xp 00000000 03:00 8312       /opt/test
 08049000-0804a000 rw-p 00001000 03:00 8312       /opt/test

Documentation/kernel-parameters.txt

@@ -1496,6 +1496,11 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 			could change it dynamically, usually by
 			/sys/module/printk/parameters/ignore_loglevel.
 
+	ignore_rlimit_data
+			Ignore RLIMIT_DATA setting for data mappings,
+			print warning at first misuse.  Can be changed via
+			/sys/module/kernel/parameters/ignore_rlimit_data.
+
 	ihash_entries=	[KNL]
 			Set number of hash buckets for inode cache.
 

Documentation/networking/ip-sysctl.txt

@@ -594,7 +594,7 @@ tcp_fastopen - INTEGER
 
 tcp_syn_retries - INTEGER
 	Number of times initial SYNs for an active TCP connection attempt
-	will be retransmitted. Should not be higher than 255. Default value
+	will be retransmitted. Should not be higher than 127. Default value
 	is 6, which corresponds to 63seconds till the last retransmission
 	with the current initial RTO of 1second. With this the final timeout
 	for an active TCP connection attempt will happen after 127seconds.

Documentation/virtual/kvm/api.txt

@@ -3025,7 +3025,7 @@ len must be a multiple of sizeof(struct kvm_s390_irq). It must be > 0
 and it must not exceed (max_vcpus + 32) * sizeof(struct kvm_s390_irq),
 which is the maximum number of possibly pending cpu-local interrupts.
 
-4.90 KVM_SMI
+4.96 KVM_SMI
 
 Capability: KVM_CAP_X86_SMM
 Architectures: x86

MAINTAINERS

@@ -223,9 +223,7 @@ F:	drivers/scsi/aacraid/
 
 ABI/API
 L:	linux-api@vger.kernel.org
-F:	Documentation/ABI/
 F:	include/linux/syscalls.h
-F:	include/uapi/
 F:	kernel/sys_ni.c
 
 ABIT UGURU 1,2 HARDWARE MONITOR DRIVER
@@ -686,13 +684,6 @@ M:	Michael Hanselmann <linux-kernel@hansmi.ch>
 S:	Supported
 F:	drivers/macintosh/ams/
 
-AMSO1100 RNIC DRIVER
-M:	Tom Tucker <tom@opengridcomputing.com>
-M:	Steve Wise <swise@opengridcomputing.com>
-L:	linux-rdma@vger.kernel.org
-S:	Maintained
-F:	drivers/infiniband/hw/amso1100/
-
 ANALOG DEVICES INC AD9389B DRIVER
 M:	Hans Verkuil <hans.verkuil@cisco.com>
 L:	linux-media@vger.kernel.org
@@ -967,6 +958,8 @@ M:	Rob Herring <robh@kernel.org>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
 F:	arch/arm/mach-highbank/
+F:	arch/arm/boot/dts/highbank.dts
+F:	arch/arm/boot/dts/ecx-*.dts*
 
 ARM/CAVIUM NETWORKS CNS3XXX MACHINE SUPPORT
 M:	Krzysztof Halasa <khalasa@piap.pl>
@@ -1042,6 +1035,7 @@ M:	Barry Song <baohua@kernel.org>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/baohua/linux.git
 S:	Maintained
+F:	arch/arm/boot/dts/prima2*
 F:	arch/arm/mach-prima2/
 F:	drivers/clk/sirf/
 F:	drivers/clocksource/timer-prima2.c
@@ -1143,6 +1137,10 @@ W:	http://www.hisilicon.com
 S:	Supported
 T:	git git://github.com/hisilicon/linux-hisi.git
 F:	arch/arm/mach-hisi/
+F:	arch/arm/boot/dts/hi3*
+F:	arch/arm/boot/dts/hip*
+F:	arch/arm/boot/dts/hisi*
+F:	arch/arm64/boot/dts/hisilicon/
 
 ARM/HP JORNADA 7XX MACHINE SUPPORT
 M:	Kristoffer Ericson <kristoffer.ericson@gmail.com>
@@ -1219,6 +1217,7 @@ M:	Santosh Shilimkar <ssantosh@kernel.org>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
 F:	arch/arm/mach-keystone/
+F:	arch/arm/boot/dts/k2*
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone.git
 
 ARM/TEXAS INSTRUMENT KEYSTONE CLOCK FRAMEWORK
@@ -1287,6 +1286,7 @@ L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
 F:	arch/arm/mach-berlin/
 F:	arch/arm/boot/dts/berlin*
+F:	arch/arm64/boot/dts/marvell/berlin*
 
 
 ARM/Marvell Dove/MV78xx0/Orion SOC support
@@ -1425,6 +1425,7 @@ S:	Maintained
 F:	arch/arm/boot/dts/qcom-*.dts
 F:	arch/arm/boot/dts/qcom-*.dtsi
 F:	arch/arm/mach-qcom/
+F:	arch/arm64/boot/dts/qcom/*
 F:	drivers/soc/qcom/
 F:	drivers/tty/serial/msm_serial.h
 F:	drivers/tty/serial/msm_serial.c
@@ -1484,6 +1485,8 @@ L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 L:	linux-samsung-soc@vger.kernel.org (moderated for non-subscribers)
 S:	Maintained
 F:	arch/arm/boot/dts/s3c*
+F:	arch/arm/boot/dts/s5p*
+F:	arch/arm/boot/dts/samsung*
 F:	arch/arm/boot/dts/exynos*
 F:	arch/arm64/boot/dts/exynos/
 F:	arch/arm/plat-samsung/
@@ -1563,6 +1566,7 @@ S:	Maintained
 F:	arch/arm/mach-socfpga/
 F:	arch/arm/boot/dts/socfpga*
 F:	arch/arm/configs/socfpga_defconfig
+F:	arch/arm64/boot/dts/altera/
 W:	http://www.rocketboards.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux.git
 
@@ -1716,7 +1720,7 @@ M:	Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
 F:	arch/arm/boot/dts/vexpress*
-F:	arch/arm64/boot/dts/arm/vexpress*
+F:	arch/arm64/boot/dts/arm/
 F:	arch/arm/mach-vexpress/
 F:	*/*/vexpress*
 F:	*/*/*/vexpress*
@@ -2343,6 +2347,7 @@ F:	arch/arm/mach-bcm/
 F:	arch/arm/boot/dts/bcm113*
 F:	arch/arm/boot/dts/bcm216*
 F:	arch/arm/boot/dts/bcm281*
+F:	arch/arm64/boot/dts/broadcom/
 F:	arch/arm/configs/bcm_defconfig
 F:	drivers/mmc/host/sdhci-bcm-kona.c
 F:	drivers/clocksource/bcm_kona_timer.c
@@ -3445,7 +3450,7 @@ S:	Maintained
 F:	drivers/usb/dwc2/
 
 DESIGNWARE USB3 DRD IP DRIVER
-M:	Felipe Balbi <balbi@ti.com>
+M:	Felipe Balbi <balbi@kernel.org>
 L:	linux-usb@vger.kernel.org
 L:	linux-omap@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb.git
@@ -4184,13 +4189,6 @@ W:	http://aeschi.ch.eu.org/efs/
 S:	Orphan
 F:	fs/efs/
 
-EHCA (IBM GX bus InfiniBand adapter) DRIVER
-M:	Hoang-Nam Nguyen <hnguyen@de.ibm.com>
-M:	Christoph Raisch <raisch@de.ibm.com>
-L:	linux-rdma@vger.kernel.org
-S:	Supported
-F:	drivers/infiniband/hw/ehca/
-
 EHEA (IBM pSeries eHEA 10Gb ethernet adapter) DRIVER
 M:	Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com>
 L:	netdev@vger.kernel.org
@@ -5809,12 +5807,6 @@ M:	Juanjo Ciarlante <jjciarla@raiz.uncu.edu.ar>
 S:	Maintained
 F:	net/ipv4/netfilter/ipt_MASQUERADE.c
 
-IPATH DRIVER
-M:	Mike Marciniszyn <infinipath@intel.com>
-L:	linux-rdma@vger.kernel.org
-S:	Maintained
-F:	drivers/staging/rdma/ipath/
-
 IPMI SUBSYSTEM
 M:	Corey Minyard <minyard@acm.org>
 L:	openipmi-developer@lists.sourceforge.net (moderated for non-subscribers)
@@ -7370,7 +7362,7 @@ F:	drivers/tty/isicom.c
 F:	include/linux/isicom.h
 
 MUSB MULTIPOINT HIGH SPEED DUAL-ROLE CONTROLLER
-M:	Felipe Balbi <balbi@ti.com>
+M:	Felipe Balbi <balbi@kernel.org>
 L:	linux-usb@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb.git
 S:	Maintained
@@ -7939,7 +7931,7 @@ F:	drivers/media/platform/omap3isp/
 F:	drivers/staging/media/omap4iss/
 
 OMAP USB SUPPORT
-M:	Felipe Balbi <balbi@ti.com>
+M:	Felipe Balbi <balbi@kernel.org>
 L:	linux-usb@vger.kernel.org
 L:	linux-omap@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb.git
@@ -8818,6 +8810,7 @@ L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 T:	git git://github.com/hzhuang1/linux.git
 T:	git git://github.com/rjarzmik/linux.git
 S:	Maintained
+F:	arch/arm/boot/dts/pxa*
 F:	arch/arm/mach-pxa/
 F:	drivers/dma/pxa*
 F:	drivers/pcmcia/pxa2xx*
@@ -8847,6 +8840,7 @@ L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 T:	git git://github.com/hzhuang1/linux.git
 T:	git git://git.linaro.org/people/ycmiao/pxa-linux.git
 S:	Maintained
+F:	arch/arm/boot/dts/mmp*
 F:	arch/arm/mach-mmp/
 
 PXA MMCI DRIVER
@@ -10158,6 +10152,7 @@ S:	Supported
 F:	drivers/media/pci/solo6x10/
 
 SOFTWARE RAID (Multiple Disks) SUPPORT
+M:	Shaohua Li <shli@kernel.org>
 L:	linux-raid@vger.kernel.org
 T:	git git://neil.brown.name/md
 S:	Supported
@@ -10173,7 +10168,7 @@ F:	drivers/net/ethernet/natsemi/sonic.*
 
 SONICS SILICON BACKPLANE DRIVER (SSB)
 M:	Michael Buesch <m@bues.ch>
-L:	netdev@vger.kernel.org
+L:	linux-wireless@vger.kernel.org
 S:	Maintained
 F:	drivers/ssb/
 F:	include/linux/ssb/
@@ -10291,6 +10286,7 @@ L:	spear-devel@list.st.com
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 W:	http://www.st.com/spear
 S:	Maintained
+F:	arch/arm/boot/dts/spear*
 F:	arch/arm/mach-spear/
 
 SPEAR CLOCK FRAMEWORK SUPPORT
@@ -11318,7 +11314,7 @@ F:	Documentation/usb/ehci.txt
 F:	drivers/usb/host/ehci*
 
 USB GADGET/PERIPHERAL SUBSYSTEM
-M:	Felipe Balbi <balbi@ti.com>
+M:	Felipe Balbi <balbi@kernel.org>
 L:	linux-usb@vger.kernel.org
 W:	http://www.linux-usb.org/gadget
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb.git
@@ -11394,7 +11390,7 @@ S:	Maintained
 F:	drivers/net/usb/pegasus.*
 
 USB PHY LAYER
-M:	Felipe Balbi <balbi@ti.com>
+M:	Felipe Balbi <balbi@kernel.org>
 L:	linux-usb@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb.git
 S:	Maintained
@@ -12133,7 +12129,7 @@ F:	drivers/net/hamradio/*scc.c
 F:	drivers/net/hamradio/z8530.h
 
 ZBUD COMPRESSED PAGE ALLOCATOR
-M:	Seth Jennings <sjennings@variantweb.net>
+M:	Seth Jennings <sjenning@redhat.com>
 L:	linux-mm@kvack.org
 S:	Maintained
 F:	mm/zbud.c
@@ -12188,7 +12184,7 @@ F:	include/linux/zsmalloc.h
 F:	Documentation/vm/zsmalloc.txt
 
 ZSWAP COMPRESSED SWAP CACHING
-M:	Seth Jennings <sjennings@variantweb.net>
+M:	Seth Jennings <sjenning@redhat.com>
 L:	linux-mm@kvack.org
 S:	Maintained
 F:	mm/zswap.c

Makefile

@@ -1,7 +1,7 @@
 VERSION = 4
 PATCHLEVEL = 5
 SUBLEVEL = 0
-EXTRAVERSION = -rc1
+EXTRAVERSION = -rc3
 NAME = Blurry Fish Butt
 
 # *DOCUMENTATION*

arch/arm/boot/compressed/Makefile

@@ -106,6 +106,15 @@ ORIG_CFLAGS := $(KBUILD_CFLAGS)
 KBUILD_CFLAGS = $(subst -pg, , $(ORIG_CFLAGS))
 endif
 
+# -fstack-protector-strong triggers protection checks in this code,
+# but it is being used too early to link to meaningful stack_chk logic.
+nossp_flags := $(call cc-option, -fno-stack-protector)
+CFLAGS_atags_to_fdt.o := $(nossp_flags)
+CFLAGS_fdt.o := $(nossp_flags)
+CFLAGS_fdt_ro.o := $(nossp_flags)
+CFLAGS_fdt_rw.o := $(nossp_flags)
+CFLAGS_fdt_wip.o := $(nossp_flags)
+
 ccflags-y := -fpic -mno-single-pic-base -fno-builtin -I$(obj)
 asflags-y := -DZIMAGE
 

arch/arm/boot/dts/am33xx.dtsi

@@ -439,6 +439,7 @@
 			ti,mbox-num-users = <4>;
 			ti,mbox-num-fifos = <8>;
 			mbox_wkupm3: wkup_m3 {
+				ti,mbox-send-noirq;
 				ti,mbox-tx = <0 0 0>;
 				ti,mbox-rx = <0 0 3>;
 			};

arch/arm/boot/dts/am4372.dtsi

@@ -73,7 +73,7 @@
 	global_timer: timer@48240200 {
 		compatible = "arm,cortex-a9-global-timer";
 		reg = <0x48240200 0x100>;
-		interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_PPI 11 IRQ_TYPE_EDGE_RISING>;
 		interrupt-parent = <&gic>;
 		clocks = <&mpu_periphclk>;
 	};
@@ -81,7 +81,7 @@
 	local_timer: timer@48240600 {
 		compatible = "arm,cortex-a9-twd-timer";
 		reg = <0x48240600 0x100>;
-		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_PPI 13 IRQ_TYPE_EDGE_RISING>;
 		interrupt-parent = <&gic>;
 		clocks = <&mpu_periphclk>;
 	};
@@ -290,6 +290,7 @@
 			ti,mbox-num-users = <4>;
 			ti,mbox-num-fifos = <8>;
 			mbox_wkupm3: wkup_m3 {
+				ti,mbox-send-noirq;
 				ti,mbox-tx = <0 0 0>;
 				ti,mbox-rx = <0 0 3>;
 			};

arch/arm/boot/dts/am437x-gp-evm.dts

@@ -590,8 +590,6 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pixcir_ts_pins>;
 		reg = <0x5c>;
-		interrupt-parent = <&gpio3>;
-		interrupts = <22 0>;
 
 		attb-gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
 
@@ -599,7 +597,7 @@
 		 * 0x264 represents the offset of padconf register of
 		 * gpio3_22 from am43xx_pinmux base.
 		 */
-		interrupts-extended = <&gpio3 22 IRQ_TYPE_NONE>,
+		interrupts-extended = <&gpio3 22 IRQ_TYPE_EDGE_FALLING>,
 				      <&am43xx_pinmux 0x264>;
 		interrupt-names = "tsc", "wakeup";
 

arch/arm/boot/dts/am43x-epos-evm.dts

@@ -491,7 +491,7 @@
 		pinctrl-0 = <&pixcir_ts_pins>;
 		reg = <0x5c>;
 		interrupt-parent = <&gpio1>;
-		interrupts = <17 0>;
+		interrupts = <17 IRQ_TYPE_EDGE_FALLING>;
 
 		attb-gpio = <&gpio1 17 GPIO_ACTIVE_HIGH>;
 

arch/arm/boot/dts/am57xx-cl-som-am57x.dts

@@ -167,7 +167,7 @@
 			DRA7XX_CORE_IOPAD(0x35b8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* vin2a_d20.rgmii1_rd3 */
 			DRA7XX_CORE_IOPAD(0x35bc, PIN_INPUT_PULLDOWN | MUX_MODE3) /* vin2a_d21.rgmii1_rd2 */
 			DRA7XX_CORE_IOPAD(0x35c0, PIN_INPUT_PULLDOWN | MUX_MODE3) /* vin2a_d22.rgmii1_rd1 */
-			DRA7XX_CORE_IOPAD(0x35c4, PIN_INPUT_PULLUP | MUX_MODE3)	/* vin2a_d23.rgmii1_rd0 */
+			DRA7XX_CORE_IOPAD(0x35c4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* vin2a_d23.rgmii1_rd0 */
 		>;
 	};
 
@@ -492,14 +492,14 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&qspi1_pins>;
 
-	spi-max-frequency = <20000000>;
+	spi-max-frequency = <48000000>;
 
 	spi_flash: spi_flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "spansion,m25p80", "jedec,spi-nor";
 		reg = <0>;				/* CS0 */
-		spi-max-frequency = <20000000>;
+		spi-max-frequency = <48000000>;
 
 		partition@0 {
 			label = "uboot";
@@ -559,13 +559,13 @@
 
 &cpsw_emac0 {
 	phy_id = <&davinci_mdio>, <0>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-txid";
 	dual_emac_res_vlan = <0>;
 };
 
 &cpsw_emac1 {
 	phy_id = <&davinci_mdio>, <1>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-txid";
 	dual_emac_res_vlan = <1>;
 };
 
@@ -588,7 +588,7 @@
 };
 
 &usb2 {
-	dr_mode = "peripheral";
+	dr_mode = "host";
 };
 
 &mcasp3 {

arch/arm/boot/dts/am57xx-sbc-am57x.dts

@@ -25,8 +25,8 @@
 &dra7_pmx_core {
 	uart3_pins_default: uart3_pins_default {
 		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x37f8, PIN_INPUT_SLEW | MUX_MODE2)	/* uart2_ctsn.uart3_rxd */
-			DRA7XX_CORE_IOPAD(0x37fc, PIN_INPUT_SLEW | MUX_MODE1)	/* uart2_rtsn.uart3_txd */
+			DRA7XX_CORE_IOPAD(0x3648, PIN_INPUT_SLEW | MUX_MODE0)	/* uart3_rxd */
+			DRA7XX_CORE_IOPAD(0x364c, PIN_INPUT_SLEW | MUX_MODE0)	/* uart3_txd */
 		>;
 	};
 
@@ -108,9 +108,9 @@
 	pinctrl-0 = <&i2c5_pins_default>;
 	clock-frequency = <400000>;
 
-	eeprom_base: atmel@50 {
+	eeprom_base: atmel@54 {
 		compatible = "atmel,24c08";
-		reg = <0x50>;
+		reg = <0x54>;
 		pagesize = <16>;
 	};
 

arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts

@@ -152,6 +152,7 @@
 				nand-on-flash-bbt;
 
 				partitions {
+					compatible = "fixed-partitions";
 					#address-cells = <1>;
 					#size-cells = <1>;
 

arch/arm/boot/dts/at91-sama5d2_xplained.dts

@@ -114,9 +114,15 @@
 
 			macb0: ethernet@f8008000 {
 				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_macb0_default>;
+				pinctrl-0 = <&pinctrl_macb0_default &pinctrl_macb0_phy_irq>;
 				phy-mode = "rmii";
 				status = "okay";
+
+				ethernet-phy@1 {
+					reg = <0x1>;
+					interrupt-parent = <&pioA>;
+					interrupts = <73 IRQ_TYPE_LEVEL_LOW>;
+				};
 			};
 
 			pdmic@f8018000 {
@@ -300,6 +306,10 @@
 					bias-disable;
 				};
 
+				pinctrl_macb0_phy_irq: macb0_phy_irq {
+					pinmux = <PIN_PC9__GPIO>;
+				};
+
 				pinctrl_pdmic_default: pdmic_default {
 					pinmux = <PIN_PB26__PDMIC_DAT>,
 						<PIN_PB27__PDMIC_CLK>;

arch/arm/boot/dts/at91-sama5d4_xplained.dts

@@ -86,10 +86,12 @@
 			macb0: ethernet@f8020000 {
 				phy-mode = "rmii";
 				status = "okay";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_macb0_rmii &pinctrl_macb0_phy_irq>;
 
 				phy0: ethernet-phy@1 {
 					interrupt-parent = <&pioE>;
-					interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
+					interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
 					reg = <1>;
 				};
 			};
@@ -152,6 +154,10 @@
 						atmel,pins =
 							<AT91_PIOE 8 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
 					};
+					pinctrl_macb0_phy_irq: macb0_phy_irq_0 {
+						atmel,pins =
+							<AT91_PIOE 1 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+					};
 				};
 			};
 		};

arch/arm/boot/dts/at91-sama5d4ek.dts

@@ -160,8 +160,15 @@
 			};
 
 			macb0: ethernet@f8020000 {
+				pinctrl-0 = <&pinctrl_macb0_rmii &pinctrl_macb0_phy_irq>;
 				phy-mode = "rmii";
 				status = "okay";
+
+				ethernet-phy@1 {
+					reg = <0x1>;
+					interrupt-parent = <&pioE>;
+					interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
+				};
 			};
 
 			mmc1: mmc@fc000000 {
@@ -193,6 +200,10 @@
 
 			pinctrl@fc06a000 {
 				board {
+					pinctrl_macb0_phy_irq: macb0_phy_irq {
+						atmel,pins =
+							<AT91_PIOE 1 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
 					pinctrl_mmc0_cd: mmc0_cd {
 						atmel,pins =
 							<AT91_PIOE 5 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;

arch/arm/boot/dts/at91sam9n12ek.dts

@@ -215,7 +215,7 @@
 	};
 
 	panel: panel {
-		compatible = "qd,qd43003c0-40", "simple-panel";
+		compatible = "qiaodian,qd43003c0-40", "simple-panel";
 		backlight = <&backlight>;
 		power-supply = <&panel_reg>;
 		#address-cells = <1>;

arch/arm/boot/dts/kirkwood-lswvl.dts

@@ -1,7 +1,8 @@
 /*
  * Device Tree file for Buffalo Linkstation LS-WVL/VL
  *
- * Copyright (C) 2015, rogershimizu@gmail.com
+ * Copyright (C) 2015, 2016
+ * Roger Shimizu <rogershimizu@gmail.com>
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
@@ -156,21 +157,21 @@
 		button@1 {
 			label = "Function Button";
 			linux,code = <KEY_OPTION>;
-			gpios = <&gpio0 45 GPIO_ACTIVE_LOW>;
+			gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
 		};
 
 		button@2 {
 			label = "Power-on Switch";
 			linux,code = <KEY_RESERVED>;
 			linux,input-type = <5>;
-			gpios = <&gpio0 46 GPIO_ACTIVE_LOW>;
+			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
 		};
 
 		button@3 {
 			label = "Power-auto Switch";
 			linux,code = <KEY_ESC>;
 			linux,input-type = <5>;
-			gpios = <&gpio0 47 GPIO_ACTIVE_LOW>;
+			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
 		};
 	};
 
@@ -185,38 +186,38 @@
 
 		led@1 {
 			label = "lswvl:red:alarm";
-			gpios = <&gpio0 36 GPIO_ACTIVE_LOW>;
+			gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
 		};
 
 		led@2 {
 			label = "lswvl:red:func";
-			gpios = <&gpio0 37 GPIO_ACTIVE_LOW>;
+			gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
 		};
 
 		led@3 {
 			label = "lswvl:amber:info";
-			gpios = <&gpio0 38 GPIO_ACTIVE_LOW>;
+			gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
 		};
 
 		led@4 {
 			label = "lswvl:blue:func";
-			gpios = <&gpio0 39 GPIO_ACTIVE_LOW>;
+			gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
 		};
 
 		led@5 {
 			label = "lswvl:blue:power";
-			gpios = <&gpio0 40 GPIO_ACTIVE_LOW>;
+			gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
 			default-state = "keep";
 		};
 
 		led@6 {
 			label = "lswvl:red:hdderr0";
-			gpios = <&gpio0 34 GPIO_ACTIVE_LOW>;
+			gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
 		};
 
 		led@7 {
 			label = "lswvl:red:hdderr1";
-			gpios = <&gpio0 35 GPIO_ACTIVE_LOW>;
+			gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
 		};
 	};
 
@@ -233,7 +234,7 @@
 				3250 1
 				5000 0>;
 
-		alarm-gpios = <&gpio0 43 GPIO_ACTIVE_HIGH>;
+		alarm-gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>;
 	};
 
 	restart_poweroff {

arch/arm/boot/dts/kirkwood-lswxl.dts

@@ -1,7 +1,8 @@
 /*
  * Device Tree file for Buffalo Linkstation LS-WXL/WSXL
  *
- * Copyright (C) 2015, rogershimizu@gmail.com
+ * Copyright (C) 2015, 2016
+ * Roger Shimizu <rogershimizu@gmail.com>
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
@@ -156,21 +157,21 @@
 		button@1 {
 			label = "Function Button";
 			linux,code = <KEY_OPTION>;
-			gpios = <&gpio1 41 GPIO_ACTIVE_LOW>;
+			gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
 		};
 
 		button@2 {
 			label = "Power-on Switch";
 			linux,code = <KEY_RESERVED>;
 			linux,input-type = <5>;
-			gpios = <&gpio1 42 GPIO_ACTIVE_LOW>;
+			gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
 		};
 
 		button@3 {
 			label = "Power-auto Switch";
 			linux,code = <KEY_ESC>;
 			linux,input-type = <5>;
-			gpios = <&gpio1 43 GPIO_ACTIVE_LOW>;
+			gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
 		};
 	};
 
@@ -185,12 +186,12 @@
 
 		led@1 {
 			label = "lswxl:blue:func";
-			gpios = <&gpio1 36 GPIO_ACTIVE_LOW>;
+			gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
 		};
 
 		led@2 {
 			label = "lswxl:red:alarm";
-			gpios = <&gpio1 49 GPIO_ACTIVE_LOW>;
+			gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
 		};
 
 		led@3 {
@@ -200,23 +201,23 @@
 
 		led@4 {
 			label = "lswxl:blue:power";
-			gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
+			gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+			default-state = "keep";
 		};
 
 		led@5 {
 			label = "lswxl:red:func";
-			gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
-			default-state = "keep";
+			gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
 		};
 
 		led@6 {
 			label = "lswxl:red:hdderr0";
-			gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
+			gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
 		};
 
 		led@7 {
 			label = "lswxl:red:hdderr1";
-			gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
+			gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;
 		};
 	};
 
@@ -225,15 +226,15 @@
 		pinctrl-0 = <&pmx_fan_low &pmx_fan_high &pmx_fan_lock>;
 		pinctrl-names = "default";
 
-		gpios = <&gpio0 47 GPIO_ACTIVE_LOW
-			 &gpio0 48 GPIO_ACTIVE_LOW>;
+		gpios = <&gpio1 16 GPIO_ACTIVE_LOW
+			 &gpio1 15 GPIO_ACTIVE_LOW>;
 
 		gpio-fan,speed-map = <0 3
 				1500 2
 				3250 1
 				5000 0>;
 
-		alarm-gpios = <&gpio1 49 GPIO_ACTIVE_HIGH>;
+		alarm-gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
 	};
 
 	restart_poweroff {
@@ -256,7 +257,7 @@
 			enable-active-high;
 			regulator-always-on;
 			regulator-boot-on;
-			gpio = <&gpio0 37 GPIO_ACTIVE_HIGH>;
+			gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
 		};
 		hdd_power0: regulator@2 {
 			compatible = "regulator-fixed";

arch/arm/boot/dts/kirkwood-pogoplug-series-4.dts

@@ -131,6 +131,7 @@
 	chip-delay = <40>;
 	status = "okay";
 	partitions {
+		compatible = "fixed-partitions";
 		#address-cells = <1>;
 		#size-cells = <1>;
 

arch/arm/boot/dts/logicpd-torpedo-som.dtsi

@@ -112,14 +112,6 @@
 	clock-frequency = <400000>;
 };
 
-&i2c2 {
-	clock-frequency = <400000>;
-};
-
-&i2c3 {
-	clock-frequency = <400000>;
-};
-
 /*
  * Only found on the wireless SOM. For the SOM without wireless, the pins for
  * MMC3 can be routed with jumpers to the second MMC slot on the devkit and
@@ -143,6 +135,7 @@
 		interrupt-parent = <&gpio5>;
 		interrupts = <24 IRQ_TYPE_LEVEL_HIGH>; /* gpio 152 */
 		ref-clock-frequency = <26000000>;
+		tcxo-clock-frequency = <26000000>;
 	};
 };
 

arch/arm/boot/dts/omap5-board-common.dtsi

@@ -130,6 +130,16 @@
 	};
 };
 
+&gpio8 {
+	/* TI trees use GPIO instead of msecure, see also muxing */
+	p234 {
+		gpio-hog;
+		gpios = <10 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "gpio8_234/msecure";
+	};
+};
+
 &omap5_pmx_core {
 	pinctrl-names = "default";
 	pinctrl-0 = <
@@ -213,6 +223,13 @@
 		>;
 	};
 
+	/* TI trees use GPIO mode; msecure mode does not work reliably? */
+	palmas_msecure_pins: palmas_msecure_pins {
+		pinctrl-single,pins = <
+			OMAP5_IOPAD(0x180, PIN_OUTPUT | MUX_MODE6) /* gpio8_234 */
+		>;
+	};
+
 	usbhost_pins: pinmux_usbhost_pins {
 		pinctrl-single,pins = <
 			OMAP5_IOPAD(0x0c4, PIN_INPUT | MUX_MODE0) /* usbb2_hsic_strobe */
@@ -278,6 +295,12 @@
 			&usbhost_wkup_pins
 	>;
 
+	palmas_sys_nirq_pins: pinmux_palmas_sys_nirq_pins {
+		pinctrl-single,pins = <
+			OMAP5_IOPAD(0x068, PIN_INPUT_PULLUP | MUX_MODE0) /* sys_nirq1 */
+		>;
+	};
+
 	usbhost_wkup_pins: pinmux_usbhost_wkup_pins {
 		pinctrl-single,pins = <
 			OMAP5_IOPAD(0x05a, PIN_OUTPUT | MUX_MODE0) /* fref_clk1_out, USB hub clk */
@@ -345,6 +368,8 @@
 		interrupt-controller;
 		#interrupt-cells = <2>;
 		ti,system-power-controller;
+		pinctrl-names = "default";
+		pinctrl-0 = <&palmas_sys_nirq_pins &palmas_msecure_pins>;
 
 		extcon_usb3: palmas_usb {
 			compatible = "ti,palmas-usb-vid";
@@ -358,6 +383,14 @@
 			#clock-cells = <0>;
 		};
 
+		rtc {
+			compatible = "ti,palmas-rtc";
+			interrupt-parent = <&palmas>;
+			interrupts = <8 IRQ_TYPE_NONE>;
+			ti,backup-battery-chargeable;
+			ti,backup-battery-charge-high-current;
+		};
+
 		palmas_pmic {
 			compatible = "ti,palmas-pmic";
 			interrupt-parent = <&palmas>;

arch/arm/boot/dts/orion5x-linkstation-lswtgl.dts

@@ -1,7 +1,8 @@
 /*
  * Device Tree file for Buffalo Linkstation LS-WTGL
  *
- * Copyright (C) 2015, Roger Shimizu <rogershimizu@gmail.com>
+ * Copyright (C) 2015, 2016
+ * Roger Shimizu <rogershimizu@gmail.com>
  *
  * This file is dual-licensed: you can use it either under the terms
  * of the GPL or the X11 license, at your option. Note that this dual
@@ -69,8 +70,6 @@
 
 		internal-regs {
 			pinctrl: pinctrl@10000 {
-				pinctrl-0 = <&pmx_usb_power &pmx_power_hdd
-					&pmx_fan_low &pmx_fan_high &pmx_fan_lock>;
 				pinctrl-names = "default";
 
 				pmx_led_power: pmx-leds {
@@ -162,6 +161,7 @@
 		led@1 {
 			label = "lswtgl:blue:power";
 			gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
+			default-state = "keep";
 		};
 
 		led@2 {
@@ -188,7 +188,7 @@
 				3250 1
 				5000 0>;
 
-		alarm-gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>;
+		alarm-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
 	};
 
 	restart_poweroff {

arch/arm/boot/dts/sama5d4.dtsi

@@ -1342,7 +1342,7 @@
 			dbgu: serial@fc069000 {
 				compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
 				reg = <0xfc069000 0x200>;
-				interrupts = <2 IRQ_TYPE_LEVEL_HIGH 7>;
+				interrupts = <45 IRQ_TYPE_LEVEL_HIGH 7>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_dbgu>;
 				clocks = <&dbgu_clk>;

arch/arm/boot/dts/ste-nomadik-stn8815.dtsi

@@ -127,22 +127,14 @@
 			};
 			mmcsd_default_mode: mmcsd_default {
 				mmcsd_default_cfg1 {
-					/* MCCLK */
-					pins = "GPIO8_B10";
-					ste,output = <0>;
-				};
-				mmcsd_default_cfg2 {
-					/* MCCMDDIR, MCDAT0DIR, MCDAT31DIR, MCDATDIR2 */
-					pins = "GPIO10_C11", "GPIO15_A12",
-					"GPIO16_C13", "GPIO23_D15";
-					ste,output = <1>;
-				};
-				mmcsd_default_cfg3 {
-					/* MCCMD, MCDAT3-0, MCMSFBCLK */
-					pins = "GPIO9_A10", "GPIO11_B11",
-					"GPIO12_A11", "GPIO13_C12",
-					"GPIO14_B12", "GPIO24_C15";
-					ste,input = <1>;
+					/*
+					 * MCCLK, MCCMDDIR, MCDAT0DIR, MCDAT31DIR, MCDATDIR2
+					 * MCCMD, MCDAT3-0, MCMSFBCLK
+					 */
+					pins = "GPIO8_B10", "GPIO9_A10", "GPIO10_C11", "GPIO11_B11",
+					       "GPIO12_A11", "GPIO13_C12", "GPIO14_B12", "GPIO15_A12",
+					       "GPIO16_C13", "GPIO23_D15", "GPIO24_C15";
+					ste,output = <2>;
 				};
 			};
 		};
@@ -802,10 +794,21 @@
 			clock-names = "mclk", "apb_pclk";
 			interrupt-parent = <&vica>;
 			interrupts = <22>;
-			max-frequency = <48000000>;
+			max-frequency = <400000>;
 			bus-width = <4>;
 			cap-mmc-highspeed;
 			cap-sd-highspeed;
+			full-pwr-cycle;
+			/*
+			 * The STw4811 circuit used with the Nomadik strictly
+			 * requires that all of these signal direction pins be
+			 * routed and used for its 4-bit levelshifter.
+			 */
+			st,sig-dir-dat0;
+			st,sig-dir-dat2;
+			st,sig-dir-dat31;
+			st,sig-dir-cmd;
+			st,sig-pin-fbclk;
 			pinctrl-names = "default";
 			pinctrl-0 = <&mmcsd_default_mux>, <&mmcsd_default_mode>;
 			vmmc-supply = <&vmmc_regulator>;

arch/arm/configs/multi_v7_defconfig

@@ -426,6 +426,7 @@ CONFIG_SUNXI_WATCHDOG=y
 CONFIG_IMX2_WDT=y
 CONFIG_TEGRA_WATCHDOG=m
 CONFIG_MESON_WATCHDOG=y
+CONFIG_DW_WATCHDOG=y
 CONFIG_DIGICOLOR_WATCHDOG=y
 CONFIG_MFD_AS3711=y
 CONFIG_MFD_AS3722=y

arch/arm/configs/omap2plus_defconfig

@@ -50,6 +50,7 @@ CONFIG_SOC_AM33XX=y
 CONFIG_SOC_AM43XX=y
 CONFIG_SOC_DRA7XX=y
 CONFIG_ARM_THUMBEE=y
+CONFIG_ARM_KERNMEM_PERMS=y
 CONFIG_ARM_ERRATA_411920=y
 CONFIG_ARM_ERRATA_430973=y
 CONFIG_SMP=y
@@ -177,6 +178,7 @@ CONFIG_TI_CPTS=y
 CONFIG_AT803X_PHY=y
 CONFIG_SMSC_PHY=y
 CONFIG_USB_USBNET=m
+CONFIG_USB_NET_SMSC75XX=m
 CONFIG_USB_NET_SMSC95XX=m
 CONFIG_USB_ALI_M5632=y
 CONFIG_USB_AN2720=y
@@ -354,6 +356,11 @@ CONFIG_USB_MUSB_DSPS=m
 CONFIG_USB_INVENTRA_DMA=y
 CONFIG_USB_TI_CPPI41_DMA=y
 CONFIG_USB_DWC3=m
+CONFIG_USB_SERIAL=m
+CONFIG_USB_SERIAL_GENERIC=y
+CONFIG_USB_SERIAL_SIMPLE=m
+CONFIG_USB_SERIAL_FTDI_SIO=m
+CONFIG_USB_SERIAL_PL2303=m
 CONFIG_USB_TEST=m
 CONFIG_AM335X_PHY_USB=y
 CONFIG_USB_GADGET=m
@@ -387,6 +394,7 @@ CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=m
 CONFIG_LEDS_GPIO=m
 CONFIG_LEDS_PWM=m
+CONFIG_LEDS_PCA963X=m
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=m
 CONFIG_LEDS_TRIGGER_ONESHOT=m
@@ -449,6 +457,8 @@ CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
 CONFIG_PRINTK_TIME=y
 CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_INFO_SPLIT=y
+CONFIG_DEBUG_INFO_DWARF4=y
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_SCHEDSTATS=y
 CONFIG_TIMER_STATS=y

arch/arm/include/uapi/asm/unistd.h

@@ -417,6 +417,7 @@
 #define __NR_userfaultfd		(__NR_SYSCALL_BASE+388)
 #define __NR_membarrier			(__NR_SYSCALL_BASE+389)
 #define __NR_mlock2			(__NR_SYSCALL_BASE+390)
+#define __NR_copy_file_range		(__NR_SYSCALL_BASE+391)
 
 /*
  * The following SWIs are ARM private.

arch/arm/kernel/calls.S

@@ -400,6 +400,7 @@
 		CALL(sys_userfaultfd)
 		CALL(sys_membarrier)
 		CALL(sys_mlock2)
+		CALL(sys_copy_file_range)
 #ifndef syscalls_counted
 .equ syscalls_padding, ((NR_syscalls + 3) & ~3) - NR_syscalls
 #define syscalls_counted

arch/arm/mach-omap2/devices.c

@@ -18,7 +18,6 @@
 #include <linux/slab.h>
 #include <linux/of.h>
 #include <linux/pinctrl/machine.h>
-#include <linux/platform_data/mailbox-omap.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/map.h>
@@ -66,32 +65,6 @@ static int __init omap3_l3_init(void)
 }
 omap_postcore_initcall(omap3_l3_init);
 
-#if defined(CONFIG_OMAP2PLUS_MBOX) || defined(CONFIG_OMAP2PLUS_MBOX_MODULE)
-static inline void __init omap_init_mbox(void)
-{
-	struct omap_hwmod *oh;
-	struct platform_device *pdev;
-	struct omap_mbox_pdata *pdata;
-
-	oh = omap_hwmod_lookup("mailbox");
-	if (!oh) {
-		pr_err("%s: unable to find hwmod\n", __func__);
-		return;
-	}
-	if (!oh->dev_attr) {
-		pr_err("%s: hwmod doesn't have valid attrs\n", __func__);
-		return;
-	}
-
-	pdata = (struct omap_mbox_pdata *)oh->dev_attr;
-	pdev = omap_device_build("omap-mailbox", -1, oh, pdata, sizeof(*pdata));
-	WARN(IS_ERR(pdev), "%s: could not build device, err %ld\n",
-						__func__, PTR_ERR(pdev));
-}
-#else
-static inline void omap_init_mbox(void) { }
-#endif /* CONFIG_OMAP2PLUS_MBOX */
-
 static inline void omap_init_sti(void) {}
 
 #if defined(CONFIG_SPI_OMAP24XX) || defined(CONFIG_SPI_OMAP24XX_MODULE)
@@ -229,7 +202,6 @@ static int __init omap2_init_devices(void)
 		 * please keep these calls, and their implementations above,
 		 * in alphabetical order so they're easier to sort through.
 		 */
-		omap_init_mbox();
 		omap_init_mcspi();
 		omap_init_sham();
 		omap_init_aes();

arch/arm/mach-omap2/pdata-quirks.c

@@ -23,6 +23,8 @@
 #include <linux/platform_data/pinctrl-single.h>
 #include <linux/platform_data/iommu-omap.h>
 #include <linux/platform_data/wkup_m3.h>
+#include <linux/platform_data/pwm_omap_dmtimer.h>
+#include <plat/dmtimer.h>
 
 #include "common.h"
 #include "common-board-devices.h"
@@ -449,6 +451,24 @@ void omap_auxdata_legacy_init(struct device *dev)
 	dev->platform_data = &twl_gpio_auxdata;
 }
 
+/* Dual mode timer PWM callbacks platdata */
+#if IS_ENABLED(CONFIG_OMAP_DM_TIMER)
+struct pwm_omap_dmtimer_pdata pwm_dmtimer_pdata = {
+	.request_by_node = omap_dm_timer_request_by_node,
+	.free = omap_dm_timer_free,
+	.enable = omap_dm_timer_enable,
+	.disable = omap_dm_timer_disable,
+	.get_fclk = omap_dm_timer_get_fclk,
+	.start = omap_dm_timer_start,
+	.stop = omap_dm_timer_stop,
+	.set_load = omap_dm_timer_set_load,
+	.set_match = omap_dm_timer_set_match,
+	.set_pwm = omap_dm_timer_set_pwm,
+	.set_prescaler = omap_dm_timer_set_prescaler,
+	.write_counter = omap_dm_timer_write_counter,
+};
+#endif
+
 /*
  * Few boards still need auxdata populated before we populate
  * the dev entries in of_platform_populate().
@@ -502,6 +522,9 @@ static struct of_dev_auxdata omap_auxdata_lookup[] __initdata = {
 	OF_DEV_AUXDATA("ti,am4372-wkup-m3", 0x44d00000, "44d00000.wkup_m3",
 		       &wkup_m3_data),
 #endif
+#if IS_ENABLED(CONFIG_OMAP_DM_TIMER)
+	OF_DEV_AUXDATA("ti,omap-dmtimer-pwm", 0, NULL, &pwm_dmtimer_pdata),
+#endif
 #if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5)
 	OF_DEV_AUXDATA("ti,omap4-iommu", 0x4a066000, "4a066000.mmu",
 		       &omap4_iommu_pdata),

arch/arm/mach-omap2/sleep34xx.S

@@ -86,13 +86,18 @@ ENTRY(enable_omap3630_toggle_l2_on_restore)
 	stmfd	sp!, {lr}	@ save registers on stack
 	/* Setup so that we will disable and enable l2 */
 	mov	r1, #0x1
-	adrl	r2, l2dis_3630	@ may be too distant for plain adr
-	str	r1, [r2]
+	adrl	r3, l2dis_3630_offset	@ may be too distant for plain adr
+	ldr	r2, [r3]		@ value for offset
+	str	r1, [r2, r3]		@ write to l2dis_3630
 	ldmfd	sp!, {pc}	@ restore regs and return
 ENDPROC(enable_omap3630_toggle_l2_on_restore)
 
-	.text
-/* Function to call rom code to save secure ram context */
+/*
+ * Function to call rom code to save secure ram context. This gets
+ * relocated to SRAM, so it can be all in .data section. Otherwise
+ * we need to initialize api_params separately.
+ */
+	.data
 	.align	3
 ENTRY(save_secure_ram_context)
 	stmfd	sp!, {r4 - r11, lr}	@ save registers on stack
@@ -126,6 +131,8 @@ ENDPROC(save_secure_ram_context)
 ENTRY(save_secure_ram_context_sz)
 	.word	. - save_secure_ram_context
 
+	.text
+
 /*
  * ======================
  * == Idle entry point ==
@@ -289,12 +296,6 @@ wait_sdrc_ready:
 	bic	r5, r5, #0x40
 	str	r5, [r4]
 
-/*
- * PC-relative stores lead to undefined behaviour in Thumb-2: use a r7 as a
- * base instead.
- * Be careful not to clobber r7 when maintaing this code.
- */
-
 is_dll_in_lock_mode:
 	/* Is dll in lock mode? */
 	ldr	r4, sdrc_dlla_ctrl
@@ -302,11 +303,7 @@ is_dll_in_lock_mode:
 	tst	r5, #0x4
 	bne	exit_nonoff_modes	@ Return if locked
 	/* wait till dll locks */
-	adr	r7, kick_counter
 wait_dll_lock_timed:
-	ldr	r4, wait_dll_lock_counter
-	add	r4, r4, #1
-	str	r4, [r7, #wait_dll_lock_counter - kick_counter]
 	ldr	r4, sdrc_dlla_status
 	/* Wait 20uS for lock */
 	mov	r6, #8
@@ -330,9 +327,6 @@ kick_dll:
 	orr	r6, r6, #(1<<3)		@ enable dll
 	str	r6, [r4]
 	dsb
-	ldr	r4, kick_counter
-	add	r4, r4, #1
-	str	r4, [r7]		@ kick_counter
 	b	wait_dll_lock_timed
 
 exit_nonoff_modes:
@@ -360,15 +354,6 @@ sdrc_dlla_status:
 	.word	SDRC_DLLA_STATUS_V
 sdrc_dlla_ctrl:
 	.word	SDRC_DLLA_CTRL_V
-	/*
-	 * When exporting to userspace while the counters are in SRAM,
-	 * these 2 words need to be at the end to facilitate retrival!
-	 */
-kick_counter:
-	.word	0
-wait_dll_lock_counter:
-	.word	0
-
 ENTRY(omap3_do_wfi_sz)
 	.word	. - omap3_do_wfi
 
@@ -437,7 +422,9 @@ ENTRY(omap3_restore)
 	cmp	r2, #0x0	@ Check if target power state was OFF or RET
 	bne	logic_l1_restore
 
-	ldr	r0, l2dis_3630
+	adr	r1, l2dis_3630_offset	@ address for offset
+	ldr	r0, [r1]		@ value for offset
+	ldr	r0, [r1, r0]		@ value at l2dis_3630
 	cmp	r0, #0x1	@ should we disable L2 on 3630?
 	bne	skipl2dis
 	mrc	p15, 0, r0, c1, c0, 1
@@ -449,12 +436,14 @@ skipl2dis:
 	and	r1, #0x700
 	cmp	r1, #0x300
 	beq	l2_inv_gp
+	adr	r0, l2_inv_api_params_offset
+	ldr	r3, [r0]
+	add	r3, r3, r0		@ r3 points to dummy parameters
 	mov	r0, #40			@ set service ID for PPA
 	mov	r12, r0			@ copy secure Service ID in r12
 	mov	r1, #0			@ set task id for ROM code in r1
 	mov	r2, #4			@ set some flags in r2, r6
 	mov	r6, #0xff
-	adr	r3, l2_inv_api_params	@ r3 points to dummy parameters
 	dsb				@ data write barrier
 	dmb				@ data memory barrier
 	smc	#1			@ call SMI monitor (smi #1)
@@ -488,8 +477,8 @@ skipl2dis:
 	b	logic_l1_restore
 
 	.align
-l2_inv_api_params:
-	.word	0x1, 0x00
+l2_inv_api_params_offset:
+	.long	l2_inv_api_params - .
 l2_inv_gp:
 	/* Execute smi to invalidate L2 cache */
 	mov r12, #0x1			@ set up to invalidate L2
@@ -506,7 +495,9 @@ l2_inv_gp:
 	mov	r12, #0x2
 	smc	#0			@ Call SMI monitor (smieq)
 logic_l1_restore:
-	ldr	r1, l2dis_3630
+	adr	r0, l2dis_3630_offset	@ adress for offset
+	ldr	r1, [r0]		@ value for offset
+	ldr	r1, [r0, r1]		@ value at l2dis_3630
 	cmp	r1, #0x1		@ Test if L2 re-enable needed on 3630
 	bne	skipl2reen
 	mrc	p15, 0, r1, c1, c0, 1
@@ -535,9 +526,17 @@ control_stat:
 	.word	CONTROL_STAT
 control_mem_rta:
 	.word	CONTROL_MEM_RTA_CTRL
+l2dis_3630_offset:
+	.long	l2dis_3630 - .
+
+	.data
 l2dis_3630:
 	.word	0
 
+	.data
+l2_inv_api_params:
+	.word	0x1, 0x00
+
 /*
  * Internal functions
  */

arch/arm/mach-omap2/sleep44xx.S

@@ -29,12 +29,6 @@
 	dsb
 .endm
 
-ppa_zero_params:
-	.word		0x0
-
-ppa_por_params:
-	.word		1, 0
-
 #ifdef CONFIG_ARCH_OMAP4
 
 /*
@@ -266,7 +260,9 @@ ENTRY(omap4_cpu_resume)
 	beq	skip_ns_smp_enable
 ppa_actrl_retry:
 	mov     r0, #OMAP4_PPA_CPU_ACTRL_SMP_INDEX
-	adr	r3, ppa_zero_params		@ Pointer to parameters
+	adr	r1, ppa_zero_params_offset
+	ldr	r3, [r1]
+	add	r3, r3, r1			@ Pointer to ppa_zero_params
 	mov	r1, #0x0			@ Process ID
 	mov	r2, #0x4			@ Flag
 	mov	r6, #0xff
@@ -303,7 +299,9 @@ skip_ns_smp_enable:
 	ldr     r0, =OMAP4_PPA_L2_POR_INDEX
 	ldr     r1, =OMAP44XX_SAR_RAM_BASE
 	ldr     r4, [r1, #L2X0_PREFETCH_CTRL_OFFSET]
-	adr     r3, ppa_por_params
+	adr     r1, ppa_por_params_offset
+	ldr	r3, [r1]
+	add	r3, r3, r1			@ Pointer to ppa_por_params
 	str     r4, [r3, #0x04]
 	mov	r1, #0x0			@ Process ID
 	mov	r2, #0x4			@ Flag
@@ -328,6 +326,8 @@ skip_l2en:
 #endif
 
 	b	cpu_resume			@ Jump to generic resume
+ppa_por_params_offset:
+	.long	ppa_por_params - .
 ENDPROC(omap4_cpu_resume)
 #endif	/* CONFIG_ARCH_OMAP4 */
 
@@ -380,4 +380,13 @@ ENTRY(omap_do_wfi)
 	nop
 
 	ldmfd	sp!, {pc}
+ppa_zero_params_offset:
+	.long	ppa_zero_params - .
 ENDPROC(omap_do_wfi)
+
+	.data
+ppa_zero_params:
+	.word		0
+
+ppa_por_params:
+	.word		1, 0

arch/arm/mach-realview/Kconfig

@@ -1,5 +1,6 @@
 menuconfig ARCH_REALVIEW
-	bool "ARM Ltd. RealView family" if ARCH_MULTI_V5 || ARCH_MULTI_V6 || ARCH_MULTI_V7
+	bool "ARM Ltd. RealView family"
+	depends on ARCH_MULTI_V5 || ARCH_MULTI_V6 || ARCH_MULTI_V7
 	select ARM_AMBA
 	select ARM_TIMER_SP804
 	select COMMON_CLK_VERSATILE

arch/arm/mach-realview/platsmp-dt.c

@@ -80,7 +80,7 @@ static void __init realview_smp_prepare_cpus(unsigned int max_cpus)
 		     virt_to_phys(versatile_secondary_startup));
 }
 
-struct smp_operations realview_dt_smp_ops __initdata = {
+static const struct smp_operations realview_dt_smp_ops __initconst = {
 	.smp_prepare_cpus	= realview_smp_prepare_cpus,
 	.smp_secondary_init	= versatile_secondary_init,
 	.smp_boot_secondary	= versatile_boot_secondary,

arch/arm/mach-tango/Kconfig

@@ -1,5 +1,6 @@
 config ARCH_TANGO
-	bool "Sigma Designs Tango4 (SMP87xx)" if ARCH_MULTI_V7
+	bool "Sigma Designs Tango4 (SMP87xx)"
+	depends on ARCH_MULTI_V7
 	# Cortex-A9 MPCore r3p0, PL310 r3p2
 	select ARCH_HAS_HOLES_MEMORYMODEL
 	select ARM_ERRATA_754322

arch/arm/mach-tango/platsmp.c

@@ -9,7 +9,7 @@ static int tango_boot_secondary(unsigned int cpu, struct task_struct *idle)
 	return 0;
 }
 
-static struct smp_operations tango_smp_ops __initdata = {
+static const struct smp_operations tango_smp_ops __initconst = {
 	.smp_boot_secondary	= tango_boot_secondary,
 };
 

arch/arm64/Makefile

@@ -27,6 +27,8 @@ $(warning LSE atomics not supported by binutils)
 endif
 
 KBUILD_CFLAGS	+= -mgeneral-regs-only $(lseinstr)
+KBUILD_CFLAGS	+= -fno-asynchronous-unwind-tables
+KBUILD_CFLAGS	+= $(call cc-option, -mpc-relative-literal-loads)
 KBUILD_AFLAGS	+= $(lseinstr)
 
 ifeq ($(CONFIG_CPU_BIG_ENDIAN), y)

arch/arm64/boot/dts/arm/juno-base.dtsi

@@ -115,6 +115,7 @@
 			     <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,

arch/arm64/boot/dts/hisilicon/hip05_hns.dtsi

@@ -23,9 +23,8 @@ soc0: soc@000000000 {
 		};
 	};
 
-	dsa: dsa@c7000000 {
+	dsaf0: dsa@c7000000 {
 		compatible = "hisilicon,hns-dsaf-v1";
-		dsa_name = "dsaf0";
 		mode = "6port-16rss";
 		interrupt-parent = <&mbigen_dsa>;
 
@@ -127,7 +126,7 @@ soc0: soc@000000000 {
 
 	eth0: ethernet@0{
 		compatible = "hisilicon,hns-nic-v1";
-		ae-name = "dsaf0";
+		ae-handle = <&dsaf0>;
 		port-id = <0>;
 		local-mac-address = [00 00 00 01 00 58];
 		status = "disabled";
@@ -135,14 +134,14 @@ soc0: soc@000000000 {
 	};
 	eth1: ethernet@1{
 		compatible = "hisilicon,hns-nic-v1";
-		ae-name = "dsaf0";
+		ae-handle = <&dsaf0>;
 		port-id = <1>;
 		status = "disabled";
 		dma-coherent;
 	};
 	eth2: ethernet@2{
 		compatible = "hisilicon,hns-nic-v1";
-		ae-name = "dsaf0";
+		ae-handle = <&dsaf0>;
 		port-id = <2>;
 		local-mac-address = [00 00 00 01 00 5a];
 		status = "disabled";
@@ -150,7 +149,7 @@ soc0: soc@000000000 {
 	};
 	eth3: ethernet@3{
 		compatible = "hisilicon,hns-nic-v1";
-		ae-name = "dsaf0";
+		ae-handle = <&dsaf0>;
 		port-id = <3>;
 		local-mac-address = [00 00 00 01 00 5b];
 		status = "disabled";
@@ -158,7 +157,7 @@ soc0: soc@000000000 {
 	};
 	eth4: ethernet@4{
 		compatible = "hisilicon,hns-nic-v1";
-		ae-name = "dsaf0";
+		ae-handle = <&dsaf0>;
 		port-id = <4>;
 		local-mac-address = [00 00 00 01 00 5c];
 		status = "disabled";
@@ -166,7 +165,7 @@ soc0: soc@000000000 {
 	};
 	eth5: ethernet@5{
 		compatible = "hisilicon,hns-nic-v1";
-		ae-name = "dsaf0";
+		ae-handle = <&dsaf0>;
 		port-id = <5>;
 		local-mac-address = [00 00 00 01 00 5d];
 		status = "disabled";
@@ -174,7 +173,7 @@ soc0: soc@000000000 {
 	};
 	eth6: ethernet@6{
 		compatible = "hisilicon,hns-nic-v1";
-		ae-name = "dsaf0";
+		ae-handle = <&dsaf0>;
 		port-id = <6>;
 		local-mac-address = [00 00 00 01 00 5e];
 		status = "disabled";
@@ -182,7 +181,7 @@ soc0: soc@000000000 {
 	};
 	eth7: ethernet@7{
 		compatible = "hisilicon,hns-nic-v1";
-		ae-name = "dsaf0";
+		ae-handle = <&dsaf0>;
 		port-id = <7>;
 		local-mac-address = [00 00 00 01 00 5f];
 		status = "disabled";

arch/arm64/boot/dts/nvidia/tegra132-norrin.dts

@@ -12,6 +12,8 @@
 		rtc1 = "/rtc@0,7000e000";
 	};
 
+	chosen { };
+
 	memory {
 		device_type = "memory";
 		reg = <0x0 0x80000000 0x0 0x80000000>;

arch/arm64/configs/defconfig

@@ -16,7 +16,6 @@ CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_MEMCG=y
 CONFIG_MEMCG_SWAP=y
-CONFIG_MEMCG_KMEM=y
 CONFIG_CGROUP_HUGETLB=y
 # CONFIG_UTS_NS is not set
 # CONFIG_IPC_NS is not set
@@ -37,15 +36,13 @@ CONFIG_ARCH_EXYNOS7=y
 CONFIG_ARCH_LAYERSCAPE=y
 CONFIG_ARCH_HISI=y
 CONFIG_ARCH_MEDIATEK=y
+CONFIG_ARCH_QCOM=y
 CONFIG_ARCH_ROCKCHIP=y
 CONFIG_ARCH_SEATTLE=y
 CONFIG_ARCH_RENESAS=y
 CONFIG_ARCH_R8A7795=y
 CONFIG_ARCH_STRATIX10=y
 CONFIG_ARCH_TEGRA=y
-CONFIG_ARCH_TEGRA_132_SOC=y
-CONFIG_ARCH_TEGRA_210_SOC=y
-CONFIG_ARCH_QCOM=y
 CONFIG_ARCH_SPRD=y
 CONFIG_ARCH_THUNDER=y
 CONFIG_ARCH_UNIPHIER=y
@@ -54,14 +51,19 @@ CONFIG_ARCH_XGENE=y
 CONFIG_ARCH_ZYNQMP=y
 CONFIG_PCI=y
 CONFIG_PCI_MSI=y
+CONFIG_PCI_IOV=y
+CONFIG_PCI_RCAR_GEN2_PCIE=y
 CONFIG_PCI_HOST_GENERIC=y
 CONFIG_PCI_XGENE=y
-CONFIG_SMP=y
+CONFIG_PCI_LAYERSCAPE=y
+CONFIG_PCI_HISI=y
+CONFIG_PCIE_QCOM=y
 CONFIG_SCHED_MC=y
 CONFIG_PREEMPT=y
 CONFIG_KSM=y
 CONFIG_TRANSPARENT_HUGEPAGE=y
 CONFIG_CMA=y
+CONFIG_XEN=y
 CONFIG_CMDLINE="console=ttyAMA0"
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 CONFIG_COMPAT=y
@@ -100,7 +102,11 @@ CONFIG_PATA_OF_PLATFORM=y
 CONFIG_NETDEVICES=y
 CONFIG_TUN=y
 CONFIG_VIRTIO_NET=y
+CONFIG_AMD_XGBE=y
 CONFIG_NET_XGENE=y
+CONFIG_E1000E=y
+CONFIG_IGB=y
+CONFIG_IGBVF=y
 CONFIG_SKY2=y
 CONFIG_RAVB=y
 CONFIG_SMC91X=y
@@ -117,25 +123,23 @@ CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_DW=y
 CONFIG_SERIAL_8250_MT6577=y
 CONFIG_SERIAL_8250_UNIPHIER=y
+CONFIG_SERIAL_OF_PLATFORM=y
 CONFIG_SERIAL_AMBA_PL011=y
 CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
 CONFIG_SERIAL_SAMSUNG=y
-CONFIG_SERIAL_SAMSUNG_UARTS_4=y
-CONFIG_SERIAL_SAMSUNG_UARTS=4
 CONFIG_SERIAL_SAMSUNG_CONSOLE=y
+CONFIG_SERIAL_TEGRA=y
 CONFIG_SERIAL_SH_SCI=y
 CONFIG_SERIAL_SH_SCI_NR_UARTS=11
 CONFIG_SERIAL_SH_SCI_CONSOLE=y
-CONFIG_SERIAL_TEGRA=y
 CONFIG_SERIAL_MSM=y
 CONFIG_SERIAL_MSM_CONSOLE=y
-CONFIG_SERIAL_OF_PLATFORM=y
 CONFIG_SERIAL_XILINX_PS_UART=y
 CONFIG_SERIAL_XILINX_PS_UART_CONSOLE=y
 CONFIG_VIRTIO_CONSOLE=y
 # CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
 CONFIG_I2C_QUP=y
+CONFIG_I2C_UNIPHIER_F=y
 CONFIG_I2C_RCAR=y
 CONFIG_SPI=y
 CONFIG_SPI_PL022=y
@@ -176,8 +180,6 @@ CONFIG_MMC_SDHCI_PLTFM=y
 CONFIG_MMC_SDHCI_TEGRA=y
 CONFIG_MMC_SPI=y
 CONFIG_MMC_DW=y
-CONFIG_MMC_DW_IDMAC=y
-CONFIG_MMC_DW_PLTFM=y
 CONFIG_MMC_DW_EXYNOS=y
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
@@ -187,28 +189,33 @@ CONFIG_LEDS_TRIGGER_HEARTBEAT=y
 CONFIG_LEDS_TRIGGER_CPU=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_EFI=y
+CONFIG_RTC_DRV_PL031=y
 CONFIG_RTC_DRV_XGENE=y
 CONFIG_DMADEVICES=y
-CONFIG_RCAR_DMAC=y
 CONFIG_QCOM_BAM_DMA=y
 CONFIG_TEGRA20_APB_DMA=y
+CONFIG_RCAR_DMAC=y
+CONFIG_VFIO=y
+CONFIG_VFIO_PCI=y
 CONFIG_VIRTIO_PCI=y
 CONFIG_VIRTIO_BALLOON=y
 CONFIG_VIRTIO_MMIO=y
+CONFIG_XEN_GNTDEV=y
+CONFIG_XEN_GRANT_DEV_ALLOC=y
 CONFIG_COMMON_CLK_CS2000_CP=y
 CONFIG_COMMON_CLK_QCOM=y
 CONFIG_MSM_GCC_8916=y
 CONFIG_HWSPINLOCK_QCOM=y
-# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_ARM_SMMU=y
 CONFIG_QCOM_SMEM=y
 CONFIG_QCOM_SMD=y
 CONFIG_QCOM_SMD_RPM=y
+CONFIG_ARCH_TEGRA_132_SOC=y
+CONFIG_ARCH_TEGRA_210_SOC=y
+CONFIG_HISILICON_IRQ_MBIGEN=y
 CONFIG_PHY_XGENE=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-# CONFIG_EXT3_FS_XATTR is not set
-CONFIG_EXT4_FS=y
 CONFIG_FANOTIFY=y
 CONFIG_FANOTIFY_ACCESS_PERMISSIONS=y
 CONFIG_QUOTA=y
@@ -239,6 +246,7 @@ CONFIG_LOCKUP_DETECTOR=y
 # CONFIG_FTRACE is not set
 CONFIG_MEMTEST=y
 CONFIG_SECURITY=y
+CONFIG_CRYPTO_ECHAINIV=y
 CONFIG_CRYPTO_ANSI_CPRNG=y
 CONFIG_ARM64_CRYPTO=y
 CONFIG_CRYPTO_SHA1_ARM64_CE=y

arch/arm64/include/asm/futex.h

@@ -121,6 +121,7 @@ futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr,
 		return -EFAULT;
 
 	asm volatile("// futex_atomic_cmpxchg_inatomic\n"
+ALTERNATIVE("nop", SET_PSTATE_PAN(0), ARM64_HAS_PAN, CONFIG_ARM64_PAN)
 "	prfm	pstl1strm, %2\n"
 "1:	ldxr	%w1, %2\n"
 "	sub	%w3, %w1, %w4\n"
@@ -137,6 +138,7 @@ futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr,
 "	.align	3\n"
 "	.quad	1b, 4b, 2b, 4b\n"
 "	.popsection\n"
+ALTERNATIVE("nop", SET_PSTATE_PAN(1), ARM64_HAS_PAN, CONFIG_ARM64_PAN)
 	: "+r" (ret), "=&r" (val), "+Q" (*uaddr), "=&r" (tmp)
 	: "r" (oldval), "r" (newval), "Ir" (-EFAULT)
 	: "memory");

arch/arm64/include/asm/page.h

@@ -39,6 +39,7 @@
 
 #ifndef __ASSEMBLY__
 
+#include <linux/personality.h> /* for READ_IMPLIES_EXEC */
 #include <asm/pgtable-types.h>
 
 extern void __cpu_clear_user_page(void *p, unsigned long user);

arch/arm64/include/asm/pgtable.h

@@ -67,11 +67,11 @@ extern void __pgd_error(const char *file, int line, unsigned long val);
 #define PROT_DEFAULT		(PTE_TYPE_PAGE | PTE_AF | PTE_SHARED)
 #define PROT_SECT_DEFAULT	(PMD_TYPE_SECT | PMD_SECT_AF | PMD_SECT_S)
 
-#define PROT_DEVICE_nGnRnE	(PROT_DEFAULT | PTE_PXN | PTE_UXN | PTE_ATTRINDX(MT_DEVICE_nGnRnE))
-#define PROT_DEVICE_nGnRE	(PROT_DEFAULT | PTE_PXN | PTE_UXN | PTE_ATTRINDX(MT_DEVICE_nGnRE))
-#define PROT_NORMAL_NC		(PROT_DEFAULT | PTE_PXN | PTE_UXN | PTE_ATTRINDX(MT_NORMAL_NC))
-#define PROT_NORMAL_WT		(PROT_DEFAULT | PTE_PXN | PTE_UXN | PTE_ATTRINDX(MT_NORMAL_WT))
-#define PROT_NORMAL		(PROT_DEFAULT | PTE_PXN | PTE_UXN | PTE_ATTRINDX(MT_NORMAL))
+#define PROT_DEVICE_nGnRnE	(PROT_DEFAULT | PTE_PXN | PTE_UXN | PTE_DIRTY | PTE_WRITE | PTE_ATTRINDX(MT_DEVICE_nGnRnE))
+#define PROT_DEVICE_nGnRE	(PROT_DEFAULT | PTE_PXN | PTE_UXN | PTE_DIRTY | PTE_WRITE | PTE_ATTRINDX(MT_DEVICE_nGnRE))
+#define PROT_NORMAL_NC		(PROT_DEFAULT | PTE_PXN | PTE_UXN | PTE_DIRTY | PTE_WRITE | PTE_ATTRINDX(MT_NORMAL_NC))
+#define PROT_NORMAL_WT		(PROT_DEFAULT | PTE_PXN | PTE_UXN | PTE_DIRTY | PTE_WRITE | PTE_ATTRINDX(MT_NORMAL_WT))
+#define PROT_NORMAL		(PROT_DEFAULT | PTE_PXN | PTE_UXN | PTE_DIRTY | PTE_WRITE | PTE_ATTRINDX(MT_NORMAL))
 
 #define PROT_SECT_DEVICE_nGnRE	(PROT_SECT_DEFAULT | PMD_SECT_PXN | PMD_SECT_UXN | PMD_ATTRINDX(MT_DEVICE_nGnRE))
 #define PROT_SECT_NORMAL	(PROT_SECT_DEFAULT | PMD_SECT_PXN | PMD_SECT_UXN | PMD_ATTRINDX(MT_NORMAL))
@@ -81,7 +81,7 @@ extern void __pgd_error(const char *file, int line, unsigned long val);
 
 #define PAGE_KERNEL		__pgprot(_PAGE_DEFAULT | PTE_PXN | PTE_UXN | PTE_DIRTY | PTE_WRITE)
 #define PAGE_KERNEL_RO		__pgprot(_PAGE_DEFAULT | PTE_PXN | PTE_UXN | PTE_DIRTY | PTE_RDONLY)
-#define PAGE_KERNEL_ROX	__pgprot(_PAGE_DEFAULT | PTE_UXN | PTE_DIRTY | PTE_RDONLY)
+#define PAGE_KERNEL_ROX		__pgprot(_PAGE_DEFAULT | PTE_UXN | PTE_DIRTY | PTE_RDONLY)
 #define PAGE_KERNEL_EXEC	__pgprot(_PAGE_DEFAULT | PTE_UXN | PTE_DIRTY | PTE_WRITE)
 #define PAGE_KERNEL_EXEC_CONT	__pgprot(_PAGE_DEFAULT | PTE_UXN | PTE_DIRTY | PTE_WRITE | PTE_CONT)
 
@@ -153,6 +153,7 @@ extern struct page *empty_zero_page;
 #define pte_write(pte)		(!!(pte_val(pte) & PTE_WRITE))
 #define pte_exec(pte)		(!(pte_val(pte) & PTE_UXN))
 #define pte_cont(pte)		(!!(pte_val(pte) & PTE_CONT))
+#define pte_user(pte)		(!!(pte_val(pte) & PTE_USER))
 
 #ifdef CONFIG_ARM64_HW_AFDBM
 #define pte_hw_dirty(pte)	(pte_write(pte) && !(pte_val(pte) & PTE_RDONLY))
@@ -163,8 +164,6 @@ extern struct page *empty_zero_page;
 #define pte_dirty(pte)		(pte_sw_dirty(pte) || pte_hw_dirty(pte))
 
 #define pte_valid(pte)		(!!(pte_val(pte) & PTE_VALID))
-#define pte_valid_user(pte) \
-	((pte_val(pte) & (PTE_VALID | PTE_USER)) == (PTE_VALID | PTE_USER))
 #define pte_valid_not_user(pte) \
 	((pte_val(pte) & (PTE_VALID | PTE_USER)) == PTE_VALID)
 #define pte_valid_young(pte) \
@@ -278,13 +277,13 @@ extern void __sync_icache_dcache(pte_t pteval, unsigned long addr);
 static inline void set_pte_at(struct mm_struct *mm, unsigned long addr,
 			      pte_t *ptep, pte_t pte)
 {
-	if (pte_valid_user(pte)) {
-		if (!pte_special(pte) && pte_exec(pte))
-			__sync_icache_dcache(pte, addr);
+	if (pte_valid(pte)) {
 		if (pte_sw_dirty(pte) && pte_write(pte))
 			pte_val(pte) &= ~PTE_RDONLY;
 		else
 			pte_val(pte) |= PTE_RDONLY;
+		if (pte_user(pte) && pte_exec(pte) && !pte_special(pte))
+			__sync_icache_dcache(pte, addr);
 	}
 
 	/*

arch/arm64/kernel/head.S

@@ -514,9 +514,14 @@ CPU_LE(	movk	x0, #0x30d0, lsl #16	)	// Clear EE and E0E on LE systems
 #endif
 
 	/* EL2 debug */
+	mrs	x0, id_aa64dfr0_el1		// Check ID_AA64DFR0_EL1 PMUVer
+	sbfx	x0, x0, #8, #4
+	cmp	x0, #1
+	b.lt	4f				// Skip if no PMU present
 	mrs	x0, pmcr_el0			// Disable debug access traps
 	ubfx	x0, x0, #11, #5			// to EL2 and allow access to
 	msr	mdcr_el2, x0			// all PMU counters from EL1
+4:
 
 	/* Stage-2 translation */
 	msr	vttbr_el2, xzr

arch/arm64/kernel/image.h

@@ -64,6 +64,16 @@
 
 #ifdef CONFIG_EFI
 
+/*
+ * Prevent the symbol aliases below from being emitted into the kallsyms
+ * table, by forcing them to be absolute symbols (which are conveniently
+ * ignored by scripts/kallsyms) rather than section relative symbols.
+ * The distinction is only relevant for partial linking, and only for symbols
+ * that are defined within a section declaration (which is not the case for
+ * the definitions below) so the resulting values will be identical.
+ */
+#define KALLSYMS_HIDE(sym)	ABSOLUTE(sym)
+
 /*
  * The EFI stub has its own symbol namespace prefixed by __efistub_, to
  * isolate it from the kernel proper. The following symbols are legally
@@ -73,25 +83,25 @@
  * linked at. The routines below are all implemented in assembler in a
  * position independent manner
  */
-__efistub_memcmp		= __pi_memcmp;
-__efistub_memchr		= __pi_memchr;
-__efistub_memcpy		= __pi_memcpy;
-__efistub_memmove		= __pi_memmove;
-__efistub_memset		= __pi_memset;
-__efistub_strlen		= __pi_strlen;
-__efistub_strcmp		= __pi_strcmp;
-__efistub_strncmp		= __pi_strncmp;
-__efistub___flush_dcache_area	= __pi___flush_dcache_area;
+__efistub_memcmp		= KALLSYMS_HIDE(__pi_memcmp);
+__efistub_memchr		= KALLSYMS_HIDE(__pi_memchr);
+__efistub_memcpy		= KALLSYMS_HIDE(__pi_memcpy);
+__efistub_memmove		= KALLSYMS_HIDE(__pi_memmove);
+__efistub_memset		= KALLSYMS_HIDE(__pi_memset);
+__efistub_strlen		= KALLSYMS_HIDE(__pi_strlen);
+__efistub_strcmp		= KALLSYMS_HIDE(__pi_strcmp);
+__efistub_strncmp		= KALLSYMS_HIDE(__pi_strncmp);
+__efistub___flush_dcache_area	= KALLSYMS_HIDE(__pi___flush_dcache_area);
 
 #ifdef CONFIG_KASAN
-__efistub___memcpy		= __pi_memcpy;
-__efistub___memmove		= __pi_memmove;
-__efistub___memset		= __pi_memset;
+__efistub___memcpy		= KALLSYMS_HIDE(__pi_memcpy);
+__efistub___memmove		= KALLSYMS_HIDE(__pi_memmove);
+__efistub___memset		= KALLSYMS_HIDE(__pi_memset);
 #endif
 
-__efistub__text			= _text;
-__efistub__end			= _end;
-__efistub__edata		= _edata;
+__efistub__text			= KALLSYMS_HIDE(_text);
+__efistub__end			= KALLSYMS_HIDE(_end);
+__efistub__edata		= KALLSYMS_HIDE(_edata);
 
 #endif
 

arch/arm64/mm/dump.c

@@ -46,7 +46,7 @@ enum address_markers_idx {
 	PCI_START_NR,
 	PCI_END_NR,
 	MODULES_START_NR,
-	MODUELS_END_NR,
+	MODULES_END_NR,
 	KERNEL_SPACE_NR,
 };
 

arch/arm64/mm/kasan_init.c

@@ -120,6 +120,7 @@ static void __init cpu_set_ttbr1(unsigned long ttbr1)
 void __init kasan_init(void)
 {
 	struct memblock_region *reg;
+	int i;
 
 	/*
 	 * We are going to perform proper setup of shadow memory.
@@ -155,6 +156,14 @@ void __init kasan_init(void)
 				pfn_to_nid(virt_to_pfn(start)));
 	}
 
+	/*
+	 * KAsan may reuse the contents of kasan_zero_pte directly, so we
+	 * should make sure that it maps the zero page read-only.
+	 */
+	for (i = 0; i < PTRS_PER_PTE; i++)
+		set_pte(&kasan_zero_pte[i],
+			pfn_pte(virt_to_pfn(kasan_zero_page), PAGE_KERNEL_RO));
+
 	memset(kasan_zero_page, 0, PAGE_SIZE);
 	cpu_set_ttbr1(__pa(swapper_pg_dir));
 	flush_tlb_all();

arch/arm64/mm/pageattr.c

@@ -14,6 +14,7 @@
 #include <linux/mm.h>
 #include <linux/module.h>
 #include <linux/sched.h>
+#include <linux/vmalloc.h>
 
 #include <asm/pgtable.h>
 #include <asm/tlbflush.h>
@@ -44,6 +45,7 @@ static int change_memory_common(unsigned long addr, int numpages,
 	unsigned long end = start + size;
 	int ret;
 	struct page_change_data data;
+	struct vm_struct *area;
 
 	if (!PAGE_ALIGNED(addr)) {
 		start &= PAGE_MASK;
@@ -51,11 +53,27 @@ static int change_memory_common(unsigned long addr, int numpages,
 		WARN_ON_ONCE(1);
 	}
 
-	if (start < MODULES_VADDR || start >= MODULES_END)
+	/*
+	 * Kernel VA mappings are always live, and splitting live section
+	 * mappings into page mappings may cause TLB conflicts. This means
+	 * we have to ensure that changing the permission bits of the range
+	 * we are operating on does not result in such splitting.
+	 *
+	 * Let's restrict ourselves to mappings created by vmalloc (or vmap).
+	 * Those are guaranteed to consist entirely of page mappings, and
+	 * splitting is never needed.
+	 *
+	 * So check whether the [addr, addr + size) interval is entirely
+	 * covered by precisely one VM area that has the VM_ALLOC flag set.
+	 */
+	area = find_vm_area((void *)addr);
+	if (!area ||
+	    end > (unsigned long)area->addr + area->size ||
+	    !(area->flags & VM_ALLOC))
 		return -EINVAL;
 
-	if (end < MODULES_VADDR || end >= MODULES_END)
-		return -EINVAL;
+	if (!numpages)
+		return 0;
 
 	data.set_mask = set_mask;
 	data.clear_mask = clear_mask;

arch/arm64/mm/proc-macros.S

@@ -84,3 +84,15 @@
 	b.lo	9998b
 	dsb	\domain
 	.endm
+
+/*
+ * reset_pmuserenr_el0 - reset PMUSERENR_EL0 if PMUv3 present
+ */
+	.macro	reset_pmuserenr_el0, tmpreg
+	mrs	\tmpreg, id_aa64dfr0_el1	// Check ID_AA64DFR0_EL1 PMUVer
+	sbfx	\tmpreg, \tmpreg, #8, #4
+	cmp	\tmpreg, #1			// Skip if no PMU present
+	b.lt	9000f
+	msr	pmuserenr_el0, xzr		// Disable PMU access from EL0
+9000:
+	.endm

arch/arm64/mm/proc.S

@@ -117,7 +117,7 @@ ENTRY(cpu_do_resume)
 	 */
 	ubfx	x11, x11, #1, #1
 	msr	oslar_el1, x11
-	msr	pmuserenr_el0, xzr		// Disable PMU access from EL0
+	reset_pmuserenr_el0 x0			// Disable PMU access from EL0
 	mov	x0, x12
 	dsb	nsh		// Make sure local tlb invalidation completed
 	isb
@@ -154,7 +154,7 @@ ENTRY(__cpu_setup)
 	msr	cpacr_el1, x0			// Enable FP/ASIMD
 	mov	x0, #1 << 12			// Reset mdscr_el1 and disable
 	msr	mdscr_el1, x0			// access to the DCC from EL0
-	msr	pmuserenr_el0, xzr		// Disable PMU access from EL0
+	reset_pmuserenr_el0 x0			// Disable PMU access from EL0
 	/*
 	 * Memory region attributes for LPAE:
 	 *

arch/m32r/Kconfig

@@ -276,6 +276,7 @@ source "kernel/Kconfig.preempt"
 
 config SMP
 	bool "Symmetric multi-processing support"
+	depends on MMU
 	---help---
 	  This enables support for systems with more than one CPU. If you have
 	  a system with only one CPU, say N. If you have a system with more

arch/mips/bcm63xx/nvram.c

@@ -19,6 +19,8 @@
 
 #include <bcm63xx_nvram.h>
 
+#define BCM63XX_DEFAULT_PSI_SIZE	64
+
 static struct bcm963xx_nvram nvram;
 static int mac_addr_used;
 
@@ -85,3 +87,12 @@ int bcm63xx_nvram_get_mac_address(u8 *mac)
 	return 0;
 }
 EXPORT_SYMBOL(bcm63xx_nvram_get_mac_address);
+
+int bcm63xx_nvram_get_psi_size(void)
+{
+	if (nvram.psi_size > 0)
+		return nvram.psi_size;
+
+	return BCM63XX_DEFAULT_PSI_SIZE;
+}
+EXPORT_SYMBOL(bcm63xx_nvram_get_psi_size);

arch/mips/include/asm/mach-bcm63xx/bcm63xx_nvram.h

@@ -30,4 +30,6 @@ u8 *bcm63xx_nvram_get_name(void);
  */
 int bcm63xx_nvram_get_mac_address(u8 *mac);
 
+int bcm63xx_nvram_get_psi_size(void);
+
 #endif /* BCM63XX_NVRAM_H */

arch/powerpc/include/asm/book3s/64/hash.h

@@ -50,7 +50,9 @@
  * set of bits not changed in pmd_modify.
  */
 #define _HPAGE_CHG_MASK (PTE_RPN_MASK | _PAGE_HPTEFLAGS | _PAGE_DIRTY | \
-			 _PAGE_ACCESSED | _PAGE_THP_HUGE)
+			 _PAGE_ACCESSED | _PAGE_THP_HUGE | _PAGE_PTE | \
+			 _PAGE_SOFT_DIRTY)
+
 
 #ifdef CONFIG_PPC_64K_PAGES
 #include <asm/book3s/64/hash-64k.h>

arch/powerpc/include/asm/book3s/64/pgtable.h

@@ -223,7 +223,6 @@ static inline pte_t *pmdp_ptep(pmd_t *pmd)
 #define pmd_pfn(pmd)		pte_pfn(pmd_pte(pmd))
 #define pmd_dirty(pmd)		pte_dirty(pmd_pte(pmd))
 #define pmd_young(pmd)		pte_young(pmd_pte(pmd))
-#define pmd_dirty(pmd)		pte_dirty(pmd_pte(pmd))
 #define pmd_mkold(pmd)		pte_pmd(pte_mkold(pmd_pte(pmd)))
 #define pmd_wrprotect(pmd)	pte_pmd(pte_wrprotect(pmd_pte(pmd)))
 #define pmd_mkdirty(pmd)	pte_pmd(pte_mkdirty(pmd_pte(pmd)))

arch/powerpc/include/asm/kvm_host.h

@@ -38,8 +38,7 @@
 
 #define KVM_MAX_VCPUS		NR_CPUS
 #define KVM_MAX_VCORES		NR_CPUS
-#define KVM_USER_MEM_SLOTS 32
-#define KVM_MEM_SLOTS_NUM KVM_USER_MEM_SLOTS
+#define KVM_USER_MEM_SLOTS	512
 
 #ifdef CONFIG_KVM_MMIO
 #define KVM_COALESCED_MMIO_PAGE_OFFSET 1

arch/powerpc/include/asm/systbl.h

@@ -383,3 +383,4 @@ SYSCALL(ni_syscall)
 SYSCALL(ni_syscall)
 SYSCALL(ni_syscall)
 SYSCALL(mlock2)
+SYSCALL(copy_file_range)

arch/powerpc/include/asm/unistd.h

@@ -12,7 +12,7 @@
 #include <uapi/asm/unistd.h>
 
 
-#define NR_syscalls		379
+#define NR_syscalls		380
 
 #define __NR__exit __NR_exit
 

arch/powerpc/include/uapi/asm/unistd.h

@@ -389,5 +389,6 @@
 #define __NR_userfaultfd	364
 #define __NR_membarrier		365
 #define __NR_mlock2		378
+#define __NR_copy_file_range	379
 
 #endif /* _UAPI_ASM_POWERPC_UNISTD_H_ */

arch/powerpc/kernel/eeh_pe.c

@@ -883,32 +883,29 @@ void eeh_pe_restore_bars(struct eeh_pe *pe)
 const char *eeh_pe_loc_get(struct eeh_pe *pe)
 {
 	struct pci_bus *bus = eeh_pe_bus_get(pe);
-	struct device_node *dn = pci_bus_to_OF_node(bus);
+	struct device_node *dn;
 	const char *loc = NULL;
 
-	if (!dn)
-		goto out;
+	while (bus) {
+		dn = pci_bus_to_OF_node(bus);
+		if (!dn) {
+			bus = bus->parent;
+			continue;
+		}
 
-	/* PHB PE or root PE ? */
-	if (pci_is_root_bus(bus)) {
-		loc = of_get_property(dn, "ibm,loc-code", NULL);
-		if (!loc)
+		if (pci_is_root_bus(bus))
 			loc = of_get_property(dn, "ibm,io-base-loc-code", NULL);
+		else
+			loc = of_get_property(dn, "ibm,slot-location-code",
+					      NULL);
+
 		if (loc)
-			goto out;
+			return loc;
 
-		/* Check the root port */
-		dn = dn->child;
-		if (!dn)
-			goto out;
+		bus = bus->parent;
 	}
 
-	loc = of_get_property(dn, "ibm,loc-code", NULL);
-	if (!loc)
-		loc = of_get_property(dn, "ibm,slot-location-code", NULL);
-
-out:
-	return loc ? loc : "N/A";
+	return "N/A";
 }
 
 /**

arch/powerpc/kernel/misc_64.S

@@ -701,31 +701,3 @@ _GLOBAL(kexec_sequence)
 	li	r5,0
 	blr	/* image->start(physid, image->start, 0); */
 #endif /* CONFIG_KEXEC */
-
-#ifdef CONFIG_MODULES
-#if defined(_CALL_ELF) && _CALL_ELF == 2
-
-#ifdef CONFIG_MODVERSIONS
-.weak __crc_TOC.
-.section "___kcrctab+TOC.","a"
-.globl __kcrctab_TOC.
-__kcrctab_TOC.:
-	.llong	__crc_TOC.
-#endif
-
-/*
- * Export a fake .TOC. since both modpost and depmod will complain otherwise.
- * Both modpost and depmod strip the leading . so we do the same here.
- */
-.section "__ksymtab_strings","a"
-__kstrtab_TOC.:
-	.asciz "TOC."
-
-.section "___ksymtab+TOC.","a"
-/* This symbol name is important: it's used by modpost to find exported syms */
-.globl __ksymtab_TOC.
-__ksymtab_TOC.:
-	.llong 0 /* .value */
-	.llong __kstrtab_TOC.
-#endif /* ELFv2 */
-#endif /* MODULES */

arch/powerpc/kernel/module_64.c

@@ -326,7 +326,10 @@ static void dedotify_versions(struct modversion_info *vers,
 		}
 }
 
-/* Undefined symbols which refer to .funcname, hack to funcname (or .TOC.) */
+/*
+ * Undefined symbols which refer to .funcname, hack to funcname. Make .TOC.
+ * seem to be defined (value set later).
+ */
 static void dedotify(Elf64_Sym *syms, unsigned int numsyms, char *strtab)
 {
 	unsigned int i;
@@ -334,8 +337,11 @@ static void dedotify(Elf64_Sym *syms, unsigned int numsyms, char *strtab)
 	for (i = 1; i < numsyms; i++) {
 		if (syms[i].st_shndx == SHN_UNDEF) {
 			char *name = strtab + syms[i].st_name;
-			if (name[0] == '.')
+			if (name[0] == '.') {
+				if (strcmp(name+1, "TOC.") == 0)
+					syms[i].st_shndx = SHN_ABS;
 				memmove(name, name+1, strlen(name));
+			}
 		}
 	}
 }
@@ -351,7 +357,7 @@ static Elf64_Sym *find_dot_toc(Elf64_Shdr *sechdrs,
 	numsyms = sechdrs[symindex].sh_size / sizeof(Elf64_Sym);
 
 	for (i = 1; i < numsyms; i++) {
-		if (syms[i].st_shndx == SHN_UNDEF
+		if (syms[i].st_shndx == SHN_ABS
 		    && strcmp(strtab + syms[i].st_name, "TOC.") == 0)
 			return &syms[i];
 	}

arch/powerpc/kvm/book3s_64_mmu.c

@@ -377,15 +377,12 @@ no_seg_found:
 
 static void kvmppc_mmu_book3s_64_slbmte(struct kvm_vcpu *vcpu, u64 rs, u64 rb)
 {
-	struct kvmppc_vcpu_book3s *vcpu_book3s;
 	u64 esid, esid_1t;
 	int slb_nr;
 	struct kvmppc_slb *slbe;
 
 	dprintk("KVM MMU: slbmte(0x%llx, 0x%llx)\n", rs, rb);
 
-	vcpu_book3s = to_book3s(vcpu);
-
 	esid = GET_ESID(rb);
 	esid_1t = GET_ESID_1T(rb);
 	slb_nr = rb & 0xfff;

arch/powerpc/kvm/book3s_hv.c

@@ -833,6 +833,24 @@ static int kvmppc_handle_exit_hv(struct kvm_run *run, struct kvm_vcpu *vcpu,
 
 	vcpu->stat.sum_exits++;
 
+	/*
+	 * This can happen if an interrupt occurs in the last stages
+	 * of guest entry or the first stages of guest exit (i.e. after
+	 * setting paca->kvm_hstate.in_guest to KVM_GUEST_MODE_GUEST_HV
+	 * and before setting it to KVM_GUEST_MODE_HOST_HV).
+	 * That can happen due to a bug, or due to a machine check
+	 * occurring at just the wrong time.
+	 */
+	if (vcpu->arch.shregs.msr & MSR_HV) {
+		printk(KERN_EMERG "KVM trap in HV mode!\n");
+		printk(KERN_EMERG "trap=0x%x | pc=0x%lx | msr=0x%llx\n",
+			vcpu->arch.trap, kvmppc_get_pc(vcpu),
+			vcpu->arch.shregs.msr);
+		kvmppc_dump_regs(vcpu);
+		run->exit_reason = KVM_EXIT_INTERNAL_ERROR;
+		run->hw.hardware_exit_reason = vcpu->arch.trap;
+		return RESUME_HOST;
+	}
 	run->exit_reason = KVM_EXIT_UNKNOWN;
 	run->ready_for_interrupt_injection = 1;
 	switch (vcpu->arch.trap) {

arch/powerpc/kvm/book3s_hv_rmhandlers.S

@@ -2153,7 +2153,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_ARCH_207S)
 
 	/* Emulate H_SET_DABR/X on P8 for the sake of compat mode guests */
 2:	rlwimi	r5, r4, 5, DAWRX_DR | DAWRX_DW
-	rlwimi	r5, r4, 1, DAWRX_WT
+	rlwimi	r5, r4, 2, DAWRX_WT
 	clrrdi	r4, r4, 3
 	std	r4, VCPU_DAWR(r3)
 	std	r5, VCPU_DAWRX(r3)
@@ -2404,6 +2404,8 @@ machine_check_realmode:
 	 * guest as machine check causing guest to crash.
 	 */
 	ld	r11, VCPU_MSR(r9)
+	rldicl.	r0, r11, 64-MSR_HV_LG, 63 /* check if it happened in HV mode */
+	bne	mc_cont			/* if so, exit to host */
 	andi.	r10, r11, MSR_RI	/* check for unrecoverable exception */
 	beq	1f			/* Deliver a machine check to guest */
 	ld	r10, VCPU_PC(r9)

arch/powerpc/kvm/powerpc.c

@@ -919,21 +919,17 @@ int kvm_vcpu_ioctl_get_one_reg(struct kvm_vcpu *vcpu, struct kvm_one_reg *reg)
 				r = -ENXIO;
 				break;
 			}
-			vcpu->arch.vr.vr[reg->id - KVM_REG_PPC_VR0] = val.vval;
+			val.vval = vcpu->arch.vr.vr[reg->id - KVM_REG_PPC_VR0];
 			break;
 		case KVM_REG_PPC_VSCR:
 			if (!cpu_has_feature(CPU_FTR_ALTIVEC)) {
 				r = -ENXIO;
 				break;
 			}
-			vcpu->arch.vr.vscr.u[3] = set_reg_val(reg->id, val);
+			val = get_reg_val(reg->id, vcpu->arch.vr.vscr.u[3]);
 			break;
 		case KVM_REG_PPC_VRSAVE:
-			if (!cpu_has_feature(CPU_FTR_ALTIVEC)) {
-				r = -ENXIO;
-				break;
-			}
-			vcpu->arch.vrsave = set_reg_val(reg->id, val);
+			val = get_reg_val(reg->id, vcpu->arch.vrsave);
 			break;
 #endif /* CONFIG_ALTIVEC */
 		default:
@@ -974,17 +970,21 @@ int kvm_vcpu_ioctl_set_one_reg(struct kvm_vcpu *vcpu, struct kvm_one_reg *reg)
 				r = -ENXIO;
 				break;
 			}
-			val.vval = vcpu->arch.vr.vr[reg->id - KVM_REG_PPC_VR0];
+			vcpu->arch.vr.vr[reg->id - KVM_REG_PPC_VR0] = val.vval;
 			break;
 		case KVM_REG_PPC_VSCR:
 			if (!cpu_has_feature(CPU_FTR_ALTIVEC)) {
 				r = -ENXIO;
 				break;
 			}
-			val = get_reg_val(reg->id, vcpu->arch.vr.vscr.u[3]);
+			vcpu->arch.vr.vscr.u[3] = set_reg_val(reg->id, val);
 			break;
 		case KVM_REG_PPC_VRSAVE:
-			val = get_reg_val(reg->id, vcpu->arch.vrsave);
+			if (!cpu_has_feature(CPU_FTR_ALTIVEC)) {
+				r = -ENXIO;
+				break;
+			}
+			vcpu->arch.vrsave = set_reg_val(reg->id, val);
 			break;
 #endif /* CONFIG_ALTIVEC */
 		default:

arch/powerpc/mm/mem.c

@@ -560,12 +560,12 @@ subsys_initcall(add_system_ram_resources);
  */
 int devmem_is_allowed(unsigned long pfn)
 {
+	if (page_is_rtas_user_buf(pfn))
+		return 1;
 	if (iomem_is_exclusive(PFN_PHYS(pfn)))
 		return 0;
 	if (!page_is_ram(pfn))
 		return 1;
-	if (page_is_rtas_user_buf(pfn))
-		return 1;
 	return 0;
 }
 #endif /* CONFIG_STRICT_DEVMEM */

arch/powerpc/perf/power8-pmu.c

@@ -816,7 +816,7 @@ static struct power_pmu power8_pmu = {
 	.get_constraint		= power8_get_constraint,
 	.get_alternatives	= power8_get_alternatives,
 	.disable_pmc		= power8_disable_pmc,
-	.flags			= PPMU_HAS_SSLOT | PPMU_HAS_SIER | PPMU_ARCH_207S,
+	.flags			= PPMU_HAS_SIER | PPMU_ARCH_207S,
 	.n_generic		= ARRAY_SIZE(power8_generic_events),
 	.generic_events		= power8_generic_events,
 	.cache_events		= &power8_cache_events,

arch/s390/include/asm/irqflags.h

@@ -8,6 +8,8 @@
 
 #include <linux/types.h>
 
+#define ARCH_IRQ_ENABLED	(3UL << (BITS_PER_LONG - 8))
+
 /* store then OR system mask. */
 #define __arch_local_irq_stosm(__or)					\
 ({									\
@@ -54,14 +56,17 @@ static inline notrace void arch_local_irq_enable(void)
 	__arch_local_irq_stosm(0x03);
 }
 
+/* This only restores external and I/O interrupt state */
 static inline notrace void arch_local_irq_restore(unsigned long flags)
 {
-	__arch_local_irq_ssm(flags);
+	/* only disabled->disabled and disabled->enabled is valid */
+	if (flags & ARCH_IRQ_ENABLED)
+		arch_local_irq_enable();
 }
 
 static inline notrace bool arch_irqs_disabled_flags(unsigned long flags)
 {
-	return !(flags & (3UL << (BITS_PER_LONG - 8)));
+	return !(flags & ARCH_IRQ_ENABLED);
 }
 
 static inline notrace bool arch_irqs_disabled(void)

arch/s390/include/asm/kvm_host.h

@@ -546,7 +546,6 @@ struct kvm_vcpu_arch {
 	struct kvm_s390_sie_block *sie_block;
 	unsigned int      host_acrs[NUM_ACRS];
 	struct fpu	  host_fpregs;
-	struct fpu	  guest_fpregs;
 	struct kvm_s390_local_interrupt local_int;
 	struct hrtimer    ckc_timer;
 	struct kvm_s390_pgm_info pgm;

arch/s390/include/asm/pci_io.h

@@ -8,10 +8,13 @@
 #include <asm/pci_insn.h>
 
 /* I/O Map */
-#define ZPCI_IOMAP_MAX_ENTRIES		0x7fff
-#define ZPCI_IOMAP_ADDR_BASE		0x8000000000000000ULL
-#define ZPCI_IOMAP_ADDR_IDX_MASK	0x7fff000000000000ULL
-#define ZPCI_IOMAP_ADDR_OFF_MASK	0x0000ffffffffffffULL
+#define ZPCI_IOMAP_SHIFT		48
+#define ZPCI_IOMAP_ADDR_BASE		0x8000000000000000UL
+#define ZPCI_IOMAP_ADDR_OFF_MASK	((1UL << ZPCI_IOMAP_SHIFT) - 1)
+#define ZPCI_IOMAP_MAX_ENTRIES							\
+	((ULONG_MAX - ZPCI_IOMAP_ADDR_BASE + 1) / (1UL << ZPCI_IOMAP_SHIFT))
+#define ZPCI_IOMAP_ADDR_IDX_MASK						\
+	(~ZPCI_IOMAP_ADDR_OFF_MASK - ZPCI_IOMAP_ADDR_BASE)
 
 struct zpci_iomap_entry {
 	u32 fh;
@@ -21,8 +24,9 @@ struct zpci_iomap_entry {
 
 extern struct zpci_iomap_entry *zpci_iomap_start;
 
+#define ZPCI_ADDR(idx) (ZPCI_IOMAP_ADDR_BASE | ((u64) idx << ZPCI_IOMAP_SHIFT))
 #define ZPCI_IDX(addr)								\
-	(((__force u64) addr & ZPCI_IOMAP_ADDR_IDX_MASK) >> 48)
+	(((__force u64) addr & ZPCI_IOMAP_ADDR_IDX_MASK) >> ZPCI_IOMAP_SHIFT)
 #define ZPCI_OFFSET(addr)							\
 	((__force u64) addr & ZPCI_IOMAP_ADDR_OFF_MASK)
 

arch/s390/include/asm/processor.h

@@ -166,14 +166,14 @@ extern __vector128 init_task_fpu_regs[__NUM_VXRS];
  */
 #define start_thread(regs, new_psw, new_stackp) do {			\
 	regs->psw.mask	= PSW_USER_BITS | PSW_MASK_EA | PSW_MASK_BA;	\
-	regs->psw.addr	= new_psw | PSW_ADDR_AMODE;			\
+	regs->psw.addr	= new_psw;					\
 	regs->gprs[15]	= new_stackp;					\
 	execve_tail();							\
 } while (0)
 
 #define start_thread31(regs, new_psw, new_stackp) do {			\
 	regs->psw.mask	= PSW_USER_BITS | PSW_MASK_BA;			\
-	regs->psw.addr	= new_psw | PSW_ADDR_AMODE;			\
+	regs->psw.addr	= new_psw;					\
 	regs->gprs[15]	= new_stackp;					\
 	crst_table_downgrade(current->mm, 1UL << 31);			\
 	execve_tail();							\

arch/s390/include/asm/ptrace.h

@@ -149,7 +149,7 @@ static inline int test_pt_regs_flag(struct pt_regs *regs, int flag)
 #define arch_has_block_step()	(1)
 
 #define user_mode(regs) (((regs)->psw.mask & PSW_MASK_PSTATE) != 0)
-#define instruction_pointer(regs) ((regs)->psw.addr & PSW_ADDR_INSN)
+#define instruction_pointer(regs) ((regs)->psw.addr)
 #define user_stack_pointer(regs)((regs)->gprs[15])
 #define profile_pc(regs) instruction_pointer(regs)
 
@@ -161,7 +161,7 @@ static inline long regs_return_value(struct pt_regs *regs)
 static inline void instruction_pointer_set(struct pt_regs *regs,
 					   unsigned long val)
 {
-	regs->psw.addr = val | PSW_ADDR_AMODE;
+	regs->psw.addr = val;
 }
 
 int regs_query_register_offset(const char *name);
@@ -171,7 +171,7 @@ unsigned long regs_get_kernel_stack_nth(struct pt_regs *regs, unsigned int n);
 
 static inline unsigned long kernel_stack_pointer(struct pt_regs *regs)
 {
-	return regs->gprs[15] & PSW_ADDR_INSN;
+	return regs->gprs[15];
 }
 
 #endif /* __ASSEMBLY__ */

arch/s390/include/uapi/asm/unistd.h

@@ -310,7 +310,8 @@
 #define __NR_recvmsg		372
 #define __NR_shutdown		373
 #define __NR_mlock2		374
-#define NR_syscalls 375
+#define __NR_copy_file_range	375
+#define NR_syscalls 376
 
 /* 
  * There are some system calls that are not present on 64 bit, some

arch/s390/kernel/compat_wrapper.c

@@ -177,3 +177,4 @@ COMPAT_SYSCALL_WRAP3(getsockname, int, fd, struct sockaddr __user *, usockaddr,
 COMPAT_SYSCALL_WRAP3(getpeername, int, fd, struct sockaddr __user *, usockaddr, int __user *, usockaddr_len);
 COMPAT_SYSCALL_WRAP6(sendto, int, fd, void __user *, buff, size_t, len, unsigned int, flags, struct sockaddr __user *, addr, int, addr_len);
 COMPAT_SYSCALL_WRAP3(mlock2, unsigned long, start, size_t, len, int, flags);
+COMPAT_SYSCALL_WRAP6(copy_file_range, int, fd_in, loff_t __user *, off_in, int, fd_out, loff_t __user *, off_out, size_t, len, unsigned int, flags);

arch/s390/kernel/crash_dump.c

@@ -59,8 +59,6 @@ struct save_area * __init save_area_alloc(bool is_boot_cpu)
 	struct save_area *sa;
 
 	sa = (void *) memblock_alloc(sizeof(*sa), 8);
-	if (!sa)
-		return NULL;
 	if (is_boot_cpu)
 		list_add(&sa->list, &dump_save_areas);
 	else

arch/s390/kernel/debug.c

@@ -1470,7 +1470,7 @@ debug_dflt_header_fn(debug_info_t * id, struct debug_view *view,
 		except_str = "*";
 	else
 		except_str = "-";
-	caller = ((unsigned long) entry->caller) & PSW_ADDR_INSN;
+	caller = (unsigned long) entry->caller;
 	rc += sprintf(out_buf, "%02i %011lld:%06lu %1u %1s %02i %p  ",
 		      area, (long long)time_spec.tv_sec,
 		      time_spec.tv_nsec / 1000, level, except_str,

arch/s390/kernel/dumpstack.c

@@ -34,22 +34,21 @@ __show_trace(unsigned long sp, unsigned long low, unsigned long high)
 	unsigned long addr;
 
 	while (1) {
-		sp = sp & PSW_ADDR_INSN;
 		if (sp < low || sp > high - sizeof(*sf))
 			return sp;
 		sf = (struct stack_frame *) sp;
-		addr = sf->gprs[8] & PSW_ADDR_INSN;
+		addr = sf->gprs[8];
 		printk("([<%016lx>] %pSR)\n", addr, (void *)addr);
 		/* Follow the backchain. */
 		while (1) {
 			low = sp;
-			sp = sf->back_chain & PSW_ADDR_INSN;
+			sp = sf->back_chain;
 			if (!sp)
 				break;
 			if (sp <= low || sp > high - sizeof(*sf))
 				return sp;
 			sf = (struct stack_frame *) sp;
-			addr = sf->gprs[8] & PSW_ADDR_INSN;
+			addr = sf->gprs[8];
 			printk(" [<%016lx>] %pSR\n", addr, (void *)addr);
 		}
 		/* Zero backchain detected, check for interrupt frame. */
@@ -57,7 +56,7 @@ __show_trace(unsigned long sp, unsigned long low, unsigned long high)
 		if (sp <= low || sp > high - sizeof(*regs))
 			return sp;
 		regs = (struct pt_regs *) sp;
-		addr = regs->psw.addr & PSW_ADDR_INSN;
+		addr = regs->psw.addr;
 		printk(" [<%016lx>] %pSR\n", addr, (void *)addr);
 		low = sp;
 		sp = regs->gprs[15];

arch/s390/kernel/early.c

@@ -252,14 +252,14 @@ static void early_pgm_check_handler(void)
 	unsigned long addr;
 
 	addr = S390_lowcore.program_old_psw.addr;
-	fixup = search_exception_tables(addr & PSW_ADDR_INSN);
+	fixup = search_exception_tables(addr);
 	if (!fixup)
 		disabled_wait(0);
 	/* Disable low address protection before storing into lowcore. */
 	__ctl_store(cr0, 0, 0);
 	cr0_new = cr0 & ~(1UL << 28);
 	__ctl_load(cr0_new, 0, 0);
-	S390_lowcore.program_old_psw.addr = extable_fixup(fixup)|PSW_ADDR_AMODE;
+	S390_lowcore.program_old_psw.addr = extable_fixup(fixup);
 	__ctl_load(cr0, 0, 0);
 }
 
@@ -268,9 +268,9 @@ static noinline __init void setup_lowcore_early(void)
 	psw_t psw;
 
 	psw.mask = PSW_MASK_BASE | PSW_DEFAULT_KEY | PSW_MASK_EA | PSW_MASK_BA;
-	psw.addr = PSW_ADDR_AMODE | (unsigned long) s390_base_ext_handler;
+	psw.addr = (unsigned long) s390_base_ext_handler;
 	S390_lowcore.external_new_psw = psw;
-	psw.addr = PSW_ADDR_AMODE | (unsigned long) s390_base_pgm_handler;
+	psw.addr = (unsigned long) s390_base_pgm_handler;
 	S390_lowcore.program_new_psw = psw;
 	s390_base_pgm_handler_fn = early_pgm_check_handler;
 }

arch/s390/kernel/ftrace.c

@@ -203,7 +203,7 @@ unsigned long prepare_ftrace_return(unsigned long parent, unsigned long ip)
 		goto out;
 	if (unlikely(atomic_read(&current->tracing_graph_pause)))
 		goto out;
-	ip = (ip & PSW_ADDR_INSN) - MCOUNT_INSN_SIZE;
+	ip -= MCOUNT_INSN_SIZE;
 	trace.func = ip;
 	trace.depth = current->curr_ret_stack + 1;
 	/* Only trace if the calling function expects to. */

arch/s390/kernel/ipl.c

@@ -2057,12 +2057,12 @@ void s390_reset_system(void)
 	/* Set new machine check handler */
 	S390_lowcore.mcck_new_psw.mask = PSW_KERNEL_BITS | PSW_MASK_DAT;
 	S390_lowcore.mcck_new_psw.addr =
-		PSW_ADDR_AMODE | (unsigned long) s390_base_mcck_handler;
+		(unsigned long) s390_base_mcck_handler;
 
 	/* Set new program check handler */
 	S390_lowcore.program_new_psw.mask = PSW_KERNEL_BITS | PSW_MASK_DAT;
 	S390_lowcore.program_new_psw.addr =
-		PSW_ADDR_AMODE | (unsigned long) s390_base_pgm_handler;
+		(unsigned long) s390_base_pgm_handler;
 
 	/*
 	 * Clear subchannel ID and number to signal new kernel that no CCW or

arch/s390/kernel/kprobes.c

@@ -226,7 +226,7 @@ static void enable_singlestep(struct kprobe_ctlblk *kcb,
 	__ctl_load(per_kprobe, 9, 11);
 	regs->psw.mask |= PSW_MASK_PER;
 	regs->psw.mask &= ~(PSW_MASK_IO | PSW_MASK_EXT);
-	regs->psw.addr = ip | PSW_ADDR_AMODE;
+	regs->psw.addr = ip;
 }
 NOKPROBE_SYMBOL(enable_singlestep);
 
@@ -238,7 +238,7 @@ static void disable_singlestep(struct kprobe_ctlblk *kcb,
 	__ctl_load(kcb->kprobe_saved_ctl, 9, 11);
 	regs->psw.mask &= ~PSW_MASK_PER;
 	regs->psw.mask |= kcb->kprobe_saved_imask;
-	regs->psw.addr = ip | PSW_ADDR_AMODE;
+	regs->psw.addr = ip;
 }
 NOKPROBE_SYMBOL(disable_singlestep);
 
@@ -310,7 +310,7 @@ static int kprobe_handler(struct pt_regs *regs)
 	 */
 	preempt_disable();
 	kcb = get_kprobe_ctlblk();
-	p = get_kprobe((void *)((regs->psw.addr & PSW_ADDR_INSN) - 2));
+	p = get_kprobe((void *)(regs->psw.addr - 2));
 
 	if (p) {
 		if (kprobe_running()) {
@@ -460,7 +460,7 @@ static int trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs)
 			break;
 	}
 
-	regs->psw.addr = orig_ret_address | PSW_ADDR_AMODE;
+	regs->psw.addr = orig_ret_address;
 
 	pop_kprobe(get_kprobe_ctlblk());
 	kretprobe_hash_unlock(current, &flags);
@@ -490,7 +490,7 @@ NOKPROBE_SYMBOL(trampoline_probe_handler);
 static void resume_execution(struct kprobe *p, struct pt_regs *regs)
 {
 	struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
-	unsigned long ip = regs->psw.addr & PSW_ADDR_INSN;
+	unsigned long ip = regs->psw.addr;
 	int fixup = probe_get_fixup_type(p->ainsn.insn);
 
 	/* Check if the kprobes location is an enabled ftrace caller */
@@ -605,9 +605,9 @@ static int kprobe_trap_handler(struct pt_regs *regs, int trapnr)
 		 * In case the user-specified fault handler returned
 		 * zero, try to fix up.
 		 */
-		entry = search_exception_tables(regs->psw.addr & PSW_ADDR_INSN);
+		entry = search_exception_tables(regs->psw.addr);
 		if (entry) {
-			regs->psw.addr = extable_fixup(entry) | PSW_ADDR_AMODE;
+			regs->psw.addr = extable_fixup(entry);
 			return 1;
 		}
 
@@ -683,7 +683,7 @@ int setjmp_pre_handler(struct kprobe *p, struct pt_regs *regs)
 	memcpy(&kcb->jprobe_saved_regs, regs, sizeof(struct pt_regs));
 
 	/* setup return addr to the jprobe handler routine */
-	regs->psw.addr = (unsigned long) jp->entry | PSW_ADDR_AMODE;
+	regs->psw.addr = (unsigned long) jp->entry;
 	regs->psw.mask &= ~(PSW_MASK_IO | PSW_MASK_EXT);
 
 	/* r15 is the stack pointer */

arch/s390/kernel/perf_event.c

@@ -74,7 +74,7 @@ static unsigned long guest_is_user_mode(struct pt_regs *regs)
 
 static unsigned long instruction_pointer_guest(struct pt_regs *regs)
 {
-	return sie_block(regs)->gpsw.addr & PSW_ADDR_INSN;
+	return sie_block(regs)->gpsw.addr;
 }
 
 unsigned long perf_instruction_pointer(struct pt_regs *regs)
@@ -231,29 +231,27 @@ static unsigned long __store_trace(struct perf_callchain_entry *entry,
 	struct pt_regs *regs;
 
 	while (1) {
-		sp = sp & PSW_ADDR_INSN;
 		if (sp < low || sp > high - sizeof(*sf))
 			return sp;
 		sf = (struct stack_frame *) sp;
-		perf_callchain_store(entry, sf->gprs[8] & PSW_ADDR_INSN);
+		perf_callchain_store(entry, sf->gprs[8]);
 		/* Follow the backchain. */
 		while (1) {
 			low = sp;
-			sp = sf->back_chain & PSW_ADDR_INSN;
+			sp = sf->back_chain;
 			if (!sp)
 				break;
 			if (sp <= low || sp > high - sizeof(*sf))
 				return sp;
 			sf = (struct stack_frame *) sp;
-			perf_callchain_store(entry,
-					     sf->gprs[8] & PSW_ADDR_INSN);
+			perf_callchain_store(entry, sf->gprs[8]);
 		}
 		/* Zero backchain detected, check for interrupt frame. */
 		sp = (unsigned long) (sf + 1);
 		if (sp <= low || sp > high - sizeof(*regs))
 			return sp;
 		regs = (struct pt_regs *) sp;
-		perf_callchain_store(entry, sf->gprs[8] & PSW_ADDR_INSN);
+		perf_callchain_store(entry, sf->gprs[8]);
 		low = sp;
 		sp = regs->gprs[15];
 	}

arch/s390/kernel/process.c

@@ -56,10 +56,10 @@ unsigned long thread_saved_pc(struct task_struct *tsk)
 		return 0;
 	low = task_stack_page(tsk);
 	high = (struct stack_frame *) task_pt_regs(tsk);
-	sf = (struct stack_frame *) (tsk->thread.ksp & PSW_ADDR_INSN);
+	sf = (struct stack_frame *) tsk->thread.ksp;
 	if (sf <= low || sf > high)
 		return 0;
-	sf = (struct stack_frame *) (sf->back_chain & PSW_ADDR_INSN);
+	sf = (struct stack_frame *) sf->back_chain;
 	if (sf <= low || sf > high)
 		return 0;
 	return sf->gprs[8];
@@ -154,7 +154,7 @@ int copy_thread(unsigned long clone_flags, unsigned long new_stackp,
 		memset(&frame->childregs, 0, sizeof(struct pt_regs));
 		frame->childregs.psw.mask = PSW_KERNEL_BITS | PSW_MASK_DAT |
 				PSW_MASK_IO | PSW_MASK_EXT | PSW_MASK_MCHECK;
-		frame->childregs.psw.addr = PSW_ADDR_AMODE |
+		frame->childregs.psw.addr =
 				(unsigned long) kernel_thread_starter;
 		frame->childregs.gprs[9] = new_stackp; /* function */
 		frame->childregs.gprs[10] = arg;
@@ -220,14 +220,14 @@ unsigned long get_wchan(struct task_struct *p)
 		return 0;
 	low = task_stack_page(p);
 	high = (struct stack_frame *) task_pt_regs(p);
-	sf = (struct stack_frame *) (p->thread.ksp & PSW_ADDR_INSN);
+	sf = (struct stack_frame *) p->thread.ksp;
 	if (sf <= low || sf > high)
 		return 0;
 	for (count = 0; count < 16; count++) {
-		sf = (struct stack_frame *) (sf->back_chain & PSW_ADDR_INSN);
+		sf = (struct stack_frame *) sf->back_chain;
 		if (sf <= low || sf > high)
 			return 0;
-		return_address = sf->gprs[8] & PSW_ADDR_INSN;
+		return_address = sf->gprs[8];
 		if (!in_sched_functions(return_address))
 			return return_address;
 	}

arch/s390/kernel/ptrace.c

@@ -84,7 +84,7 @@ void update_cr_regs(struct task_struct *task)
 		if (test_tsk_thread_flag(task, TIF_UPROBE_SINGLESTEP))
 			new.control |= PER_EVENT_IFETCH;
 		new.start = 0;
-		new.end = PSW_ADDR_INSN;
+		new.end = -1UL;
 	}
 
 	/* Take care of the PER enablement bit in the PSW. */
@@ -148,7 +148,7 @@ static inline unsigned long __peek_user_per(struct task_struct *child,
 	else if (addr == (addr_t) &dummy->cr11)
 		/* End address of the active per set. */
 		return test_thread_flag(TIF_SINGLE_STEP) ?
-			PSW_ADDR_INSN : child->thread.per_user.end;
+			-1UL : child->thread.per_user.end;
 	else if (addr == (addr_t) &dummy->bits)
 		/* Single-step bit. */
 		return test_thread_flag(TIF_SINGLE_STEP) ?
@@ -495,8 +495,6 @@ long arch_ptrace(struct task_struct *child, long request,
 		}
 		return 0;
 	default:
-		/* Removing high order bit from addr (only for 31 bit). */
-		addr &= PSW_ADDR_INSN;
 		return ptrace_request(child, request, addr, data);
 	}
 }

arch/s390/kernel/setup.c

@@ -301,25 +301,21 @@ static void __init setup_lowcore(void)
 	BUILD_BUG_ON(sizeof(struct lowcore) != LC_PAGES * 4096);
 	lc = __alloc_bootmem_low(LC_PAGES * PAGE_SIZE, LC_PAGES * PAGE_SIZE, 0);
 	lc->restart_psw.mask = PSW_KERNEL_BITS;
-	lc->restart_psw.addr =
-		PSW_ADDR_AMODE | (unsigned long) restart_int_handler;
+	lc->restart_psw.addr = (unsigned long) restart_int_handler;
 	lc->external_new_psw.mask = PSW_KERNEL_BITS |
 		PSW_MASK_DAT | PSW_MASK_MCHECK;
-	lc->external_new_psw.addr =
-		PSW_ADDR_AMODE | (unsigned long) ext_int_handler;
+	lc->external_new_psw.addr = (unsigned long) ext_int_handler;
 	lc->svc_new_psw.mask = PSW_KERNEL_BITS |
 		PSW_MASK_DAT | PSW_MASK_IO | PSW_MASK_EXT | PSW_MASK_MCHECK;
-	lc->svc_new_psw.addr = PSW_ADDR_AMODE | (unsigned long) system_call;
+	lc->svc_new_psw.addr = (unsigned long) system_call;
 	lc->program_new_psw.mask = PSW_KERNEL_BITS |
 		PSW_MASK_DAT | PSW_MASK_MCHECK;
-	lc->program_new_psw.addr =
-		PSW_ADDR_AMODE | (unsigned long) pgm_check_handler;
+	lc->program_new_psw.addr = (unsigned long) pgm_check_handler;
 	lc->mcck_new_psw.mask = PSW_KERNEL_BITS;
-	lc->mcck_new_psw.addr =
-		PSW_ADDR_AMODE | (unsigned long) mcck_int_handler;
+	lc->mcck_new_psw.addr = (unsigned long) mcck_int_handler;
 	lc->io_new_psw.mask = PSW_KERNEL_BITS |
 		PSW_MASK_DAT | PSW_MASK_MCHECK;
-	lc->io_new_psw.addr = PSW_ADDR_AMODE | (unsigned long) io_int_handler;
+	lc->io_new_psw.addr = (unsigned long) io_int_handler;
 	lc->clock_comparator = -1ULL;
 	lc->kernel_stack = ((unsigned long) &init_thread_union)
 		+ THREAD_SIZE - STACK_FRAME_OVERHEAD - sizeof(struct pt_regs);

arch/s390/kernel/signal.c

@@ -331,13 +331,13 @@ static int setup_frame(int sig, struct k_sigaction *ka,
 	/* Set up to return from userspace.  If provided, use a stub
 	   already in userspace.  */
 	if (ka->sa.sa_flags & SA_RESTORER) {
-		restorer = (unsigned long) ka->sa.sa_restorer | PSW_ADDR_AMODE;
+		restorer = (unsigned long) ka->sa.sa_restorer;
 	} else {
 		/* Signal frame without vector registers are short ! */
 		__u16 __user *svc = (void __user *) frame + frame_size - 2;
 		if (__put_user(S390_SYSCALL_OPCODE | __NR_sigreturn, svc))
 			return -EFAULT;
-		restorer = (unsigned long) svc | PSW_ADDR_AMODE;
+		restorer = (unsigned long) svc;
 	}
 
 	/* Set up registers for signal handler */
@@ -347,7 +347,7 @@ static int setup_frame(int sig, struct k_sigaction *ka,
 	regs->psw.mask = PSW_MASK_EA | PSW_MASK_BA |
 		(PSW_USER_BITS & PSW_MASK_ASC) |
 		(regs->psw.mask & ~PSW_MASK_ASC);
-	regs->psw.addr = (unsigned long) ka->sa.sa_handler | PSW_ADDR_AMODE;
+	regs->psw.addr = (unsigned long) ka->sa.sa_handler;
 
 	regs->gprs[2] = sig;
 	regs->gprs[3] = (unsigned long) &frame->sc;
@@ -394,13 +394,12 @@ static int setup_rt_frame(struct ksignal *ksig, sigset_t *set,
 	/* Set up to return from userspace.  If provided, use a stub
 	   already in userspace.  */
 	if (ksig->ka.sa.sa_flags & SA_RESTORER) {
-		restorer = (unsigned long)
-			ksig->ka.sa.sa_restorer | PSW_ADDR_AMODE;
+		restorer = (unsigned long) ksig->ka.sa.sa_restorer;
 	} else {
 		__u16 __user *svc = &frame->svc_insn;
 		if (__put_user(S390_SYSCALL_OPCODE | __NR_rt_sigreturn, svc))
 			return -EFAULT;
-		restorer = (unsigned long) svc | PSW_ADDR_AMODE;
+		restorer = (unsigned long) svc;
 	}
 
 	/* Create siginfo on the signal stack */
@@ -426,7 +425,7 @@ static int setup_rt_frame(struct ksignal *ksig, sigset_t *set,
 	regs->psw.mask = PSW_MASK_EA | PSW_MASK_BA |
 		(PSW_USER_BITS & PSW_MASK_ASC) |
 		(regs->psw.mask & ~PSW_MASK_ASC);
-	regs->psw.addr = (unsigned long) ksig->ka.sa.sa_handler | PSW_ADDR_AMODE;
+	regs->psw.addr = (unsigned long) ksig->ka.sa.sa_handler;
 
 	regs->gprs[2] = ksig->sig;
 	regs->gprs[3] = (unsigned long) &frame->info;