Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

Pull input updates from Dmitry Torokhov:

 - the main change is a fix for my brain-dead patch to PS/2 button
   reporting for some protocols that made it in 4.17

 - there is a new driver for Spreadtum vibrator that I intended to send
   during merge window but ended up not sending the 2nd pull request.
   Given that this is a brand new driver we should not see regressions
   here

 - a fixup to Elantech PS/2 driver to avoid decoding errors on Thinkpad
   P52

 - addition of few more ACPI IDs for Silead and Elan drivers

 - RMI4 is switched to using IRQ domain code instead of rolling its own
   implementation

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: psmouse - fix button reporting for basic protocols
  Input: xpad - fix GPD Win 2 controller name
  Input: elan_i2c_smbus - fix more potential stack buffer overflows
  Input: elan_i2c - add ELAN0618 (Lenovo v330 15IKB) ACPI ID
  Input: elantech - fix V4 report decoding for module with middle key
  Input: elantech - enable middle button of touchpads on ThinkPad P52
  Input: do not assign new tracking ID when changing tool type
  Input: make input_report_slot_state() return boolean
  Input: synaptics-rmi4 - fix axis-swap behavior
  Input: synaptics-rmi4 - fix the error return code in rmi_probe_interrupts()
  Input: synaptics-rmi4 - convert irq distribution to irq_domain
  Input: silead - add MSSL0002 ACPI HID
  Input: goldfish_events - fix checkpatch warnings
  Input: add Spreadtrum vibrator driver

Documentation/devicetree/bindings/input/sprd,sc27xx-vibra.txt

@@ -0,0 +1,23 @@
+Spreadtrum SC27xx PMIC Vibrator
+
+Required properties:
+- compatible: should be "sprd,sc2731-vibrator".
+- reg: address of vibrator control register.
+
+Example :
+
+	sc2731_pmic: pmic@0 {
+		compatible = "sprd,sc2731";
+		reg = <0>;
+		spi-max-frequency = <26000000>;
+		interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		vibrator@eb4 {
+			compatible = "sprd,sc2731-vibrator";
+			reg = <0xeb4>;
+		};
+	};

drivers/input/input-mt.c

@@ -131,8 +131,10 @@ EXPORT_SYMBOL(input_mt_destroy_slots);
  * inactive, or if the tool type is changed, a new tracking id is
  * assigned to the slot. The tool type is only reported if the
  * corresponding absbit field is set.
+ *
+ * Returns true if contact is active.
  */
-void input_mt_report_slot_state(struct input_dev *dev,
+bool input_mt_report_slot_state(struct input_dev *dev,
 				unsigned int tool_type, bool active)
 {
 	struct input_mt *mt = dev->mt;
@@ -140,22 +142,24 @@ void input_mt_report_slot_state(struct input_dev *dev,
 	int id;
 
 	if (!mt)
-		return;
+		return false;
 
 	slot = &mt->slots[mt->slot];
 	slot->frame = mt->frame;
 
 	if (!active) {
 		input_event(dev, EV_ABS, ABS_MT_TRACKING_ID, -1);
-		return;
+		return false;
 	}
 
 	id = input_mt_get_value(slot, ABS_MT_TRACKING_ID);
-	if (id < 0 || input_mt_get_value(slot, ABS_MT_TOOL_TYPE) != tool_type)
+	if (id < 0)
 		id = input_mt_new_trkid(mt);
 
 	input_event(dev, EV_ABS, ABS_MT_TRACKING_ID, id);
 	input_event(dev, EV_ABS, ABS_MT_TOOL_TYPE, tool_type);
+
+	return true;
 }
 EXPORT_SYMBOL(input_mt_report_slot_state);
 

drivers/input/joystick/xpad.c

@@ -125,7 +125,7 @@ static const struct xpad_device {
 	u8 mapping;
 	u8 xtype;
 } xpad_device[] = {
-	{ 0x0079, 0x18d4, "GPD Win 2 Controller", 0, XTYPE_XBOX360 },
+	{ 0x0079, 0x18d4, "GPD Win 2 X-Box Controller", 0, XTYPE_XBOX360 },
 	{ 0x044f, 0x0f00, "Thrustmaster Wheel", 0, XTYPE_XBOX },
 	{ 0x044f, 0x0f03, "Thrustmaster Wheel", 0, XTYPE_XBOX },
 	{ 0x044f, 0x0f07, "Thrustmaster, Inc. Controller", 0, XTYPE_XBOX },

drivers/input/keyboard/goldfish_events.c

@@ -45,7 +45,7 @@ struct event_dev {
 static irqreturn_t events_interrupt(int irq, void *dev_id)
 {
 	struct event_dev *edev = dev_id;
-	unsigned type, code, value;
+	unsigned int type, code, value;
 
 	type = __raw_readl(edev->addr + REG_READ);
 	code = __raw_readl(edev->addr + REG_READ);
@@ -57,7 +57,7 @@ static irqreturn_t events_interrupt(int irq, void *dev_id)
 }
 
 static void events_import_bits(struct event_dev *edev,
-			unsigned long bits[], unsigned type, size_t count)
+			unsigned long bits[], unsigned int type, size_t count)
 {
 	void __iomem *addr = edev->addr;
 	int i, j;
@@ -99,6 +99,7 @@ static void events_import_abs_params(struct event_dev *edev)
 
 		for (j = 0; j < ARRAY_SIZE(val); j++) {
 			int offset = (i * ARRAY_SIZE(val) + j) * sizeof(u32);
+
 			val[j] = __raw_readl(edev->addr + REG_DATA + offset);
 		}
 
@@ -112,7 +113,7 @@ static int events_probe(struct platform_device *pdev)
 	struct input_dev *input_dev;
 	struct event_dev *edev;
 	struct resource *res;
-	unsigned keymapnamelen;
+	unsigned int keymapnamelen;
 	void __iomem *addr;
 	int irq;
 	int i;
@@ -150,7 +151,7 @@ static int events_probe(struct platform_device *pdev)
 	for (i = 0; i < keymapnamelen; i++)
 		edev->name[i] = __raw_readb(edev->addr + REG_DATA + i);
 
-	pr_debug("events_probe() keymap=%s\n", edev->name);
+	pr_debug("%s: keymap=%s\n", __func__, edev->name);
 
 	input_dev->name = edev->name;
 	input_dev->id.bustype = BUS_HOST;

drivers/input/misc/Kconfig

@@ -841,4 +841,14 @@ config INPUT_RAVE_SP_PWRBUTTON
 	  To compile this driver as a module, choose M here: the
 	  module will be called rave-sp-pwrbutton.
 
+config INPUT_SC27XX_VIBRA
+	tristate "Spreadtrum sc27xx vibrator support"
+	depends on MFD_SC27XX_PMIC || COMPILE_TEST
+	select INPUT_FF_MEMLESS
+	help
+	  This option enables support for Spreadtrum sc27xx vibrator driver.
+
+	  To compile this driver as a module, choose M here. The module will
+	  be called sc27xx_vibra.
+
 endif

drivers/input/misc/Makefile

@@ -66,6 +66,7 @@ obj-$(CONFIG_INPUT_RETU_PWRBUTTON)	+= retu-pwrbutton.o
 obj-$(CONFIG_INPUT_AXP20X_PEK)		+= axp20x-pek.o
 obj-$(CONFIG_INPUT_GPIO_ROTARY_ENCODER)	+= rotary_encoder.o
 obj-$(CONFIG_INPUT_RK805_PWRKEY)	+= rk805-pwrkey.o
+obj-$(CONFIG_INPUT_SC27XX_VIBRA)	+= sc27xx-vibra.o
 obj-$(CONFIG_INPUT_SGI_BTNS)		+= sgi_btns.o
 obj-$(CONFIG_INPUT_SIRFSOC_ONKEY)	+= sirfsoc-onkey.o
 obj-$(CONFIG_INPUT_SOC_BUTTON_ARRAY)	+= soc_button_array.o

drivers/input/misc/sc27xx-vibra.c

@@ -0,0 +1,154 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2018 Spreadtrum Communications Inc.
+ */
+
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/input.h>
+#include <linux/workqueue.h>
+
+#define CUR_DRV_CAL_SEL		GENMASK(13, 12)
+#define SLP_LDOVIBR_PD_EN	BIT(9)
+#define LDO_VIBR_PD		BIT(8)
+
+struct vibra_info {
+	struct input_dev	*input_dev;
+	struct work_struct	play_work;
+	struct regmap		*regmap;
+	u32			base;
+	u32			strength;
+	bool			enabled;
+};
+
+static void sc27xx_vibra_set(struct vibra_info *info, bool on)
+{
+	if (on) {
+		regmap_update_bits(info->regmap, info->base, LDO_VIBR_PD, 0);
+		regmap_update_bits(info->regmap, info->base,
+				   SLP_LDOVIBR_PD_EN, 0);
+		info->enabled = true;
+	} else {
+		regmap_update_bits(info->regmap, info->base, LDO_VIBR_PD,
+				   LDO_VIBR_PD);
+		regmap_update_bits(info->regmap, info->base,
+				   SLP_LDOVIBR_PD_EN, SLP_LDOVIBR_PD_EN);
+		info->enabled = false;
+	}
+}
+
+static int sc27xx_vibra_hw_init(struct vibra_info *info)
+{
+	return regmap_update_bits(info->regmap, info->base, CUR_DRV_CAL_SEL, 0);
+}
+
+static void sc27xx_vibra_play_work(struct work_struct *work)
+{
+	struct vibra_info *info = container_of(work, struct vibra_info,
+					       play_work);
+
+	if (info->strength && !info->enabled)
+		sc27xx_vibra_set(info, true);
+	else if (info->strength == 0 && info->enabled)
+		sc27xx_vibra_set(info, false);
+}
+
+static int sc27xx_vibra_play(struct input_dev *input, void *data,
+			     struct ff_effect *effect)
+{
+	struct vibra_info *info = input_get_drvdata(input);
+
+	info->strength = effect->u.rumble.weak_magnitude;
+	schedule_work(&info->play_work);
+
+	return 0;
+}
+
+static void sc27xx_vibra_close(struct input_dev *input)
+{
+	struct vibra_info *info = input_get_drvdata(input);
+
+	cancel_work_sync(&info->play_work);
+	if (info->enabled)
+		sc27xx_vibra_set(info, false);
+}
+
+static int sc27xx_vibra_probe(struct platform_device *pdev)
+{
+	struct vibra_info *info;
+	int error;
+
+	info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL);
+	if (!info)
+		return -ENOMEM;
+
+	info->regmap = dev_get_regmap(pdev->dev.parent, NULL);
+	if (!info->regmap) {
+		dev_err(&pdev->dev, "failed to get vibrator regmap.\n");
+		return -ENODEV;
+	}
+
+	error = device_property_read_u32(&pdev->dev, "reg", &info->base);
+	if (error) {
+		dev_err(&pdev->dev, "failed to get vibrator base address.\n");
+		return error;
+	}
+
+	info->input_dev = devm_input_allocate_device(&pdev->dev);
+	if (!info->input_dev) {
+		dev_err(&pdev->dev, "failed to allocate input device.\n");
+		return -ENOMEM;
+	}
+
+	info->input_dev->name = "sc27xx:vibrator";
+	info->input_dev->id.version = 0;
+	info->input_dev->close = sc27xx_vibra_close;
+
+	input_set_drvdata(info->input_dev, info);
+	input_set_capability(info->input_dev, EV_FF, FF_RUMBLE);
+	INIT_WORK(&info->play_work, sc27xx_vibra_play_work);
+	info->enabled = false;
+
+	error = sc27xx_vibra_hw_init(info);
+	if (error) {
+		dev_err(&pdev->dev, "failed to initialize the vibrator.\n");
+		return error;
+	}
+
+	error = input_ff_create_memless(info->input_dev, NULL,
+					sc27xx_vibra_play);
+	if (error) {
+		dev_err(&pdev->dev, "failed to register vibrator to FF.\n");
+		return error;
+	}
+
+	error = input_register_device(info->input_dev);
+	if (error) {
+		dev_err(&pdev->dev, "failed to register input device.\n");
+		return error;
+	}
+
+	return 0;
+}
+
+static const struct of_device_id sc27xx_vibra_of_match[] = {
+	{ .compatible = "sprd,sc2731-vibrator", },
+	{}
+};
+MODULE_DEVICE_TABLE(of, sc27xx_vibra_of_match);
+
+static struct platform_driver sc27xx_vibra_driver = {
+	.driver = {
+		.name = "sc27xx-vibrator",
+		.of_match_table = sc27xx_vibra_of_match,
+	},
+	.probe = sc27xx_vibra_probe,
+};
+
+module_platform_driver(sc27xx_vibra_driver);
+
+MODULE_DESCRIPTION("Spreadtrum SC27xx Vibrator Driver");
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Xiaotong Lu <xiaotong.lu@spreadtrum.com>");

drivers/input/mouse/elan_i2c.h

@@ -27,6 +27,8 @@
 #define ETP_DISABLE_POWER	0x0001
 #define ETP_PRESSURE_OFFSET	25
 
+#define ETP_CALIBRATE_MAX_LEN	3
+
 /* IAP Firmware handling */
 #define ETP_PRODUCT_ID_FORMAT_STRING	"%d.0"
 #define ETP_FW_NAME		"elan_i2c_" ETP_PRODUCT_ID_FORMAT_STRING ".bin"

drivers/input/mouse/elan_i2c_core.c

@@ -613,7 +613,7 @@ static ssize_t calibrate_store(struct device *dev,
 	int tries = 20;
 	int retval;
 	int error;
-	u8 val[3];
+	u8 val[ETP_CALIBRATE_MAX_LEN];
 
 	retval = mutex_lock_interruptible(&data->sysfs_mutex);
 	if (retval)
@@ -1345,6 +1345,7 @@ static const struct acpi_device_id elan_acpi_id[] = {
 	{ "ELAN060C", 0 },
 	{ "ELAN0611", 0 },
 	{ "ELAN0612", 0 },
+	{ "ELAN0618", 0 },
 	{ "ELAN1000", 0 },
 	{ }
 };

drivers/input/mouse/elan_i2c_smbus.c

@@ -56,7 +56,7 @@
 static int elan_smbus_initialize(struct i2c_client *client)
 {
 	u8 check[ETP_SMBUS_HELLOPACKET_LEN] = { 0x55, 0x55, 0x55, 0x55, 0x55 };
-	u8 values[ETP_SMBUS_HELLOPACKET_LEN] = { 0, 0, 0, 0, 0 };
+	u8 values[I2C_SMBUS_BLOCK_MAX] = {0};
 	int len, error;
 
 	/* Get hello packet */
@@ -117,12 +117,16 @@ static int elan_smbus_calibrate(struct i2c_client *client)
 static int elan_smbus_calibrate_result(struct i2c_client *client, u8 *val)
 {
 	int error;
+	u8 buf[I2C_SMBUS_BLOCK_MAX] = {0};
+
+	BUILD_BUG_ON(ETP_CALIBRATE_MAX_LEN > sizeof(buf));
 
 	error = i2c_smbus_read_block_data(client,
-					  ETP_SMBUS_CALIBRATE_QUERY, val);
+					  ETP_SMBUS_CALIBRATE_QUERY, buf);
 	if (error < 0)
 		return error;
 
+	memcpy(val, buf, ETP_CALIBRATE_MAX_LEN);
 	return 0;
 }
 
@@ -472,6 +476,8 @@ static int elan_smbus_get_report(struct i2c_client *client, u8 *report)
 {
 	int len;
 
+	BUILD_BUG_ON(I2C_SMBUS_BLOCK_MAX > ETP_SMBUS_REPORT_LEN);
+
 	len = i2c_smbus_read_block_data(client,
 					ETP_SMBUS_PACKET_QUERY,
 					&report[ETP_SMBUS_REPORT_OFFSET]);

drivers/input/mouse/elantech.c

@@ -799,7 +799,7 @@ static int elantech_packet_check_v4(struct psmouse *psmouse)
 	else if (ic_version == 7 && etd->info.samples[1] == 0x2A)
 		sanity_check = ((packet[3] & 0x1c) == 0x10);
 	else
-		sanity_check = ((packet[0] & 0x0c) == 0x04 &&
+		sanity_check = ((packet[0] & 0x08) == 0x00 &&
 				(packet[3] & 0x1c) == 0x10);
 
 	if (!sanity_check)
@@ -1175,6 +1175,12 @@ static const struct dmi_system_id elantech_dmi_has_middle_button[] = {
 	{ }
 };
 
+static const char * const middle_button_pnp_ids[] = {
+	"LEN2131", /* ThinkPad P52 w/ NFC */
+	"LEN2132", /* ThinkPad P52 */
+	NULL
+};
+
 /*
  * Set the appropriate event bits for the input subsystem
  */
@@ -1194,7 +1200,8 @@ static int elantech_set_input_params(struct psmouse *psmouse)
 	__clear_bit(EV_REL, dev->evbit);
 
 	__set_bit(BTN_LEFT, dev->keybit);
-	if (dmi_check_system(elantech_dmi_has_middle_button))
+	if (dmi_check_system(elantech_dmi_has_middle_button) ||
+			psmouse_matches_pnp_id(psmouse, middle_button_pnp_ids))
 		__set_bit(BTN_MIDDLE, dev->keybit);
 	__set_bit(BTN_RIGHT, dev->keybit);
 

drivers/input/mouse/psmouse-base.c

@@ -192,8 +192,8 @@ psmouse_ret_t psmouse_process_byte(struct psmouse *psmouse)
 			else
 				input_report_rel(dev, REL_WHEEL, -wheel);
 
-			input_report_key(dev, BTN_SIDE,  BIT(4));
-			input_report_key(dev, BTN_EXTRA, BIT(5));
+			input_report_key(dev, BTN_SIDE,  packet[3] & BIT(4));
+			input_report_key(dev, BTN_EXTRA, packet[3] & BIT(5));
 			break;
 		}
 		break;
@@ -203,13 +203,13 @@ psmouse_ret_t psmouse_process_byte(struct psmouse *psmouse)
 		input_report_rel(dev, REL_WHEEL, -(s8) packet[3]);
 
 		/* Extra buttons on Genius NewNet 3D */
-		input_report_key(dev, BTN_SIDE,  BIT(6));
-		input_report_key(dev, BTN_EXTRA, BIT(7));
+		input_report_key(dev, BTN_SIDE,  packet[0] & BIT(6));
+		input_report_key(dev, BTN_EXTRA, packet[0] & BIT(7));
 		break;
 
 	case PSMOUSE_THINKPS:
 		/* Extra button on ThinkingMouse */
-		input_report_key(dev, BTN_EXTRA, BIT(3));
+		input_report_key(dev, BTN_EXTRA, packet[0] & BIT(3));
 
 		/*
 		 * Without this bit of weirdness moving up gives wildly
@@ -223,7 +223,7 @@ psmouse_ret_t psmouse_process_byte(struct psmouse *psmouse)
 		 * Cortron PS2 Trackball reports SIDE button in the
 		 * 4th bit of the first byte.
 		 */
-		input_report_key(dev, BTN_SIDE, BIT(3));
+		input_report_key(dev, BTN_SIDE, packet[0] & BIT(3));
 		packet[0] |= BIT(3);
 		break;
 

drivers/input/rmi4/Kconfig

@@ -3,6 +3,7 @@
 #
 config RMI4_CORE
 	tristate "Synaptics RMI4 bus support"
+	select IRQ_DOMAIN
 	help
 	  Say Y here if you want to support the Synaptics RMI4 bus.  This is
 	  required for all RMI4 device support.

drivers/input/rmi4/rmi_2d_sensor.c

@@ -32,15 +32,15 @@ void rmi_2d_sensor_abs_process(struct rmi_2d_sensor *sensor,
 	if (obj->type == RMI_2D_OBJECT_NONE)
 		return;
 
-	if (axis_align->swap_axes)
-		swap(obj->x, obj->y);
-
 	if (axis_align->flip_x)
 		obj->x = sensor->max_x - obj->x;
 
 	if (axis_align->flip_y)
 		obj->y = sensor->max_y - obj->y;
 
+	if (axis_align->swap_axes)
+		swap(obj->x, obj->y);
+
 	/*
 	 * Here checking if X offset or y offset are specified is
 	 * redundant. We just add the offsets or clip the values.
@@ -120,15 +120,15 @@ void rmi_2d_sensor_rel_report(struct rmi_2d_sensor *sensor, int x, int y)
 	x = min(RMI_2D_REL_POS_MAX, max(RMI_2D_REL_POS_MIN, (int)x));
 	y = min(RMI_2D_REL_POS_MAX, max(RMI_2D_REL_POS_MIN, (int)y));
 
-	if (axis_align->swap_axes)
-		swap(x, y);
-
 	if (axis_align->flip_x)
 		x = min(RMI_2D_REL_POS_MAX, -x);
 
 	if (axis_align->flip_y)
 		y = min(RMI_2D_REL_POS_MAX, -y);
 
+	if (axis_align->swap_axes)
+		swap(x, y);
+
 	if (x || y) {
 		input_report_rel(sensor->input, REL_X, x);
 		input_report_rel(sensor->input, REL_Y, y);
@@ -141,17 +141,10 @@ static void rmi_2d_sensor_set_input_params(struct rmi_2d_sensor *sensor)
 	struct input_dev *input = sensor->input;
 	int res_x;
 	int res_y;
+	int max_x, max_y;
 	int input_flags = 0;
 
 	if (sensor->report_abs) {
-		if (sensor->axis_align.swap_axes) {
-			swap(sensor->max_x, sensor->max_y);
-			swap(sensor->axis_align.clip_x_low,
-			     sensor->axis_align.clip_y_low);
-			swap(sensor->axis_align.clip_x_high,
-			     sensor->axis_align.clip_y_high);
-		}
-
 		sensor->min_x = sensor->axis_align.clip_x_low;
 		if (sensor->axis_align.clip_x_high)
 			sensor->max_x = min(sensor->max_x,
@@ -163,14 +156,19 @@ static void rmi_2d_sensor_set_input_params(struct rmi_2d_sensor *sensor)
 				sensor->axis_align.clip_y_high);
 
 		set_bit(EV_ABS, input->evbit);
-		input_set_abs_params(input, ABS_MT_POSITION_X, 0, sensor->max_x,
-					0, 0);
-		input_set_abs_params(input, ABS_MT_POSITION_Y, 0, sensor->max_y,
-					0, 0);
+
+		max_x = sensor->max_x;
+		max_y = sensor->max_y;
+		if (sensor->axis_align.swap_axes)
+			swap(max_x, max_y);
+		input_set_abs_params(input, ABS_MT_POSITION_X, 0, max_x, 0, 0);
+		input_set_abs_params(input, ABS_MT_POSITION_Y, 0, max_y, 0, 0);
 
 		if (sensor->x_mm && sensor->y_mm) {
 			res_x = (sensor->max_x - sensor->min_x) / sensor->x_mm;
 			res_y = (sensor->max_y - sensor->min_y) / sensor->y_mm;
+			if (sensor->axis_align.swap_axes)
+				swap(res_x, res_y);
 
 			input_abs_set_res(input, ABS_X, res_x);
 			input_abs_set_res(input, ABS_Y, res_y);

drivers/input/rmi4/rmi_bus.c

@@ -9,6 +9,8 @@
 
 #include <linux/kernel.h>
 #include <linux/device.h>
+#include <linux/irq.h>
+#include <linux/irqdomain.h>
 #include <linux/list.h>
 #include <linux/pm.h>
 #include <linux/rmi.h>
@@ -167,6 +169,39 @@ static inline void rmi_function_of_probe(struct rmi_function *fn)
 {}
 #endif
 
+static struct irq_chip rmi_irq_chip = {
+	.name = "rmi4",
+};
+
+static int rmi_create_function_irq(struct rmi_function *fn,
+				   struct rmi_function_handler *handler)
+{
+	struct rmi_driver_data *drvdata = dev_get_drvdata(&fn->rmi_dev->dev);
+	int i, error;
+
+	for (i = 0; i < fn->num_of_irqs; i++) {
+		set_bit(fn->irq_pos + i, fn->irq_mask);
+
+		fn->irq[i] = irq_create_mapping(drvdata->irqdomain,
+						fn->irq_pos + i);
+
+		irq_set_chip_data(fn->irq[i], fn);
+		irq_set_chip_and_handler(fn->irq[i], &rmi_irq_chip,
+					 handle_simple_irq);
+		irq_set_nested_thread(fn->irq[i], 1);
+
+		error = devm_request_threaded_irq(&fn->dev, fn->irq[i], NULL,
+					handler->attention, IRQF_ONESHOT,
+					dev_name(&fn->dev), fn);
+		if (error) {
+			dev_err(&fn->dev, "Error %d registering IRQ\n", error);
+			return error;
+		}
+	}
+
+	return 0;
+}
+
 static int rmi_function_probe(struct device *dev)
 {
 	struct rmi_function *fn = to_rmi_function(dev);
@@ -178,7 +213,14 @@ static int rmi_function_probe(struct device *dev)
 
 	if (handler->probe) {
 		error = handler->probe(fn);
-		return error;
+		if (error)
+			return error;
+	}
+
+	if (fn->num_of_irqs && handler->attention) {
+		error = rmi_create_function_irq(fn, handler);
+		if (error)
+			return error;
 	}
 
 	return 0;
@@ -230,12 +272,18 @@ err_put_device:
 
 void rmi_unregister_function(struct rmi_function *fn)
 {
+	int i;
+
 	rmi_dbg(RMI_DEBUG_CORE, &fn->dev, "Unregistering F%02X.\n",
 			fn->fd.function_number);
 
 	device_del(&fn->dev);
 	of_node_put(fn->dev.of_node);
 	put_device(&fn->dev);
+
+	for (i = 0; i < fn->num_of_irqs; i++)
+		irq_dispose_mapping(fn->irq[i]);
+
 }
 
 /**

drivers/input/rmi4/rmi_bus.h

@@ -14,6 +14,12 @@
 
 struct rmi_device;
 
+/*
+ * The interrupt source count in the function descriptor can represent up to
+ * 6 interrupt sources in the normal manner.
+ */
+#define RMI_FN_MAX_IRQS	6
+
 /**
  * struct rmi_function - represents the implementation of an RMI4
  * function for a particular device (basically, a driver for that RMI4 function)
@@ -26,6 +32,7 @@ struct rmi_device;
  * @irq_pos: The position in the irq bitfield this function holds
  * @irq_mask: For convenience, can be used to mask IRQ bits off during ATTN
  * interrupt handling.
+ * @irqs: assigned virq numbers (up to num_of_irqs)
  *
  * @node: entry in device's list of functions
  */
@@ -36,6 +43,7 @@ struct rmi_function {
 	struct list_head node;
 
 	unsigned int num_of_irqs;
+	int irq[RMI_FN_MAX_IRQS];
 	unsigned int irq_pos;
 	unsigned long irq_mask[];
 };
@@ -76,7 +84,7 @@ struct rmi_function_handler {
 	void (*remove)(struct rmi_function *fn);
 	int (*config)(struct rmi_function *fn);
 	int (*reset)(struct rmi_function *fn);
-	int (*attention)(struct rmi_function *fn, unsigned long *irq_bits);
+	irqreturn_t (*attention)(int irq, void *ctx);
 	int (*suspend)(struct rmi_function *fn);
 	int (*resume)(struct rmi_function *fn);
 };

drivers/input/rmi4/rmi_driver.c

@@ -21,6 +21,7 @@
 #include <linux/pm.h>
 #include <linux/slab.h>
 #include <linux/of.h>
+#include <linux/irqdomain.h>
 #include <uapi/linux/input.h>
 #include <linux/rmi.h>
 #include "rmi_bus.h"
@@ -127,28 +128,11 @@ static int rmi_driver_process_config_requests(struct rmi_device *rmi_dev)
 	return 0;
 }
 
-static void process_one_interrupt(struct rmi_driver_data *data,
-				  struct rmi_function *fn)
-{
-	struct rmi_function_handler *fh;
-
-	if (!fn || !fn->dev.driver)
-		return;
-
-	fh = to_rmi_function_handler(fn->dev.driver);
-	if (fh->attention) {
-		bitmap_and(data->fn_irq_bits, data->irq_status, fn->irq_mask,
-				data->irq_count);
-		if (!bitmap_empty(data->fn_irq_bits, data->irq_count))
-			fh->attention(fn, data->fn_irq_bits);
-	}
-}
-
 static int rmi_process_interrupt_requests(struct rmi_device *rmi_dev)
 {
 	struct rmi_driver_data *data = dev_get_drvdata(&rmi_dev->dev);
 	struct device *dev = &rmi_dev->dev;
-	struct rmi_function *entry;
+	int i;
 	int error;
 
 	if (!data)
@@ -173,16 +157,8 @@ static int rmi_process_interrupt_requests(struct rmi_device *rmi_dev)
 	 */
 	mutex_unlock(&data->irq_mutex);
 
-	/*
-	 * It would be nice to be able to use irq_chip to handle these
-	 * nested IRQs.  Unfortunately, most of the current customers for
-	 * this driver are using older kernels (3.0.x) that don't support
-	 * the features required for that.  Once they've shifted to more
-	 * recent kernels (say, 3.3 and higher), this should be switched to
-	 * use irq_chip.
-	 */
-	list_for_each_entry(entry, &data->function_list, node)
-		process_one_interrupt(data, entry);
+	for_each_set_bit(i, data->irq_status, data->irq_count)
+		handle_nested_irq(irq_find_mapping(data->irqdomain, i));
 
 	if (data->input)
 		input_sync(data->input);
@@ -1001,9 +977,13 @@ EXPORT_SYMBOL_GPL(rmi_driver_resume);
 static int rmi_driver_remove(struct device *dev)
 {
 	struct rmi_device *rmi_dev = to_rmi_device(dev);
+	struct rmi_driver_data *data = dev_get_drvdata(&rmi_dev->dev);
 
 	rmi_disable_irq(rmi_dev, false);
 
+	irq_domain_remove(data->irqdomain);
+	data->irqdomain = NULL;
+
 	rmi_f34_remove_sysfs(rmi_dev);
 	rmi_free_function_list(rmi_dev);
 
@@ -1035,7 +1015,8 @@ int rmi_probe_interrupts(struct rmi_driver_data *data)
 {
 	struct rmi_device *rmi_dev = data->rmi_dev;
 	struct device *dev = &rmi_dev->dev;
-	int irq_count;
+	struct fwnode_handle *fwnode = rmi_dev->xport->dev->fwnode;
+	int irq_count = 0;
 	size_t size;
 	int retval;
 
@@ -1046,7 +1027,6 @@ int rmi_probe_interrupts(struct rmi_driver_data *data)
 	 * being accessed.
 	 */
 	rmi_dbg(RMI_DEBUG_CORE, dev, "%s: Counting IRQs.\n", __func__);
-	irq_count = 0;
 	data->bootloader_mode = false;
 
 	retval = rmi_scan_pdt(rmi_dev, &irq_count, rmi_count_irqs);
@@ -1058,6 +1038,15 @@ int rmi_probe_interrupts(struct rmi_driver_data *data)
 	if (data->bootloader_mode)
 		dev_warn(dev, "Device in bootloader mode.\n");
 
+	/* Allocate and register a linear revmap irq_domain */
+	data->irqdomain = irq_domain_create_linear(fwnode, irq_count,
+						   &irq_domain_simple_ops,
+						   data);
+	if (!data->irqdomain) {
+		dev_err(&rmi_dev->dev, "Failed to create IRQ domain\n");
+		return -ENOMEM;
+	}
+
 	data->irq_count = irq_count;
 	data->num_of_irq_regs = (data->irq_count + 7) / 8;
 
@@ -1080,10 +1069,9 @@ int rmi_init_functions(struct rmi_driver_data *data)
 {
 	struct rmi_device *rmi_dev = data->rmi_dev;
 	struct device *dev = &rmi_dev->dev;
-	int irq_count;
+	int irq_count = 0;
 	int retval;
 
-	irq_count = 0;
 	rmi_dbg(RMI_DEBUG_CORE, dev, "%s: Creating functions.\n", __func__);
 	retval = rmi_scan_pdt(rmi_dev, &irq_count, rmi_create_function);
 	if (retval < 0) {

drivers/input/rmi4/rmi_f01.c

@@ -681,9 +681,9 @@ static int rmi_f01_resume(struct rmi_function *fn)
 	return 0;
 }
 
-static int rmi_f01_attention(struct rmi_function *fn,
-			     unsigned long *irq_bits)
+static irqreturn_t rmi_f01_attention(int irq, void *ctx)
 {
+	struct rmi_function *fn = ctx;
 	struct rmi_device *rmi_dev = fn->rmi_dev;
 	int error;
 	u8 device_status;
@@ -692,7 +692,7 @@ static int rmi_f01_attention(struct rmi_function *fn,
 	if (error) {
 		dev_err(&fn->dev,
 			"Failed to read device status: %d.\n", error);
-		return error;
+		return IRQ_RETVAL(error);
 	}
 
 	if (RMI_F01_STATUS_BOOTLOADER(device_status))
@@ -704,11 +704,11 @@ static int rmi_f01_attention(struct rmi_function *fn,
 		error = rmi_dev->driver->reset_handler(rmi_dev);
 		if (error) {
 			dev_err(&fn->dev, "Device reset failed: %d\n", error);
-			return error;
+			return IRQ_RETVAL(error);
 		}
 	}
 
-	return 0;
+	return IRQ_HANDLED;
 }
 
 struct rmi_function_handler rmi_f01_handler = {

drivers/input/rmi4/rmi_f03.c

@@ -244,8 +244,9 @@ static int rmi_f03_config(struct rmi_function *fn)
 	return 0;
 }
 
-static int rmi_f03_attention(struct rmi_function *fn, unsigned long *irq_bits)
+static irqreturn_t rmi_f03_attention(int irq, void *ctx)
 {
+	struct rmi_function *fn = ctx;
 	struct rmi_device *rmi_dev = fn->rmi_dev;
 	struct rmi_driver_data *drvdata = dev_get_drvdata(&rmi_dev->dev);
 	struct f03_data *f03 = dev_get_drvdata(&fn->dev);
@@ -262,7 +263,7 @@ static int rmi_f03_attention(struct rmi_function *fn, unsigned long *irq_bits)
 		/* First grab the data passed by the transport device */
 		if (drvdata->attn_data.size < ob_len) {
 			dev_warn(&fn->dev, "F03 interrupted, but data is missing!\n");
-			return 0;
+			return IRQ_HANDLED;
 		}
 
 		memcpy(obs, drvdata->attn_data.data, ob_len);
@@ -277,7 +278,7 @@ static int rmi_f03_attention(struct rmi_function *fn, unsigned long *irq_bits)
 				"%s: Failed to read F03 output buffers: %d\n",
 				__func__, error);
 			serio_interrupt(f03->serio, 0, SERIO_TIMEOUT);
-			return error;
+			return IRQ_RETVAL(error);
 		}
 	}
 
@@ -303,7 +304,7 @@ static int rmi_f03_attention(struct rmi_function *fn, unsigned long *irq_bits)
 		serio_interrupt(f03->serio, ob_data, serio_flags);
 	}
 
-	return 0;
+	return IRQ_HANDLED;
 }
 
 static void rmi_f03_remove(struct rmi_function *fn)

drivers/input/rmi4/rmi_f11.c

@@ -570,9 +570,7 @@ static inline u8 rmi_f11_parse_finger_state(const u8 *f_state, u8 n_finger)
 }
 
 static void rmi_f11_finger_handler(struct f11_data *f11,
-				   struct rmi_2d_sensor *sensor,
-				   unsigned long *irq_bits, int num_irq_regs,
-				   int size)
+				   struct rmi_2d_sensor *sensor, int size)
 {
 	const u8 *f_state = f11->data.f_state;
 	u8 finger_state;
@@ -581,12 +579,7 @@ static void rmi_f11_finger_handler(struct f11_data *f11,
 	int rel_fingers;
 	int abs_size = sensor->nbr_fingers * RMI_F11_ABS_BYTES;
 
-	int abs_bits = bitmap_and(f11->result_bits, irq_bits, f11->abs_mask,
-				  num_irq_regs * 8);
-	int rel_bits = bitmap_and(f11->result_bits, irq_bits, f11->rel_mask,
-				  num_irq_regs * 8);
-
-	if (abs_bits) {
+	if (sensor->report_abs) {
 		if (abs_size > size)
 			abs_fingers = size / RMI_F11_ABS_BYTES;
 		else
@@ -604,19 +597,7 @@ static void rmi_f11_finger_handler(struct f11_data *f11,
 			rmi_f11_abs_pos_process(f11, sensor, &sensor->objs[i],
 							finger_state, i);
 		}
-	}
 
-	if (rel_bits) {
-		if ((abs_size + sensor->nbr_fingers * RMI_F11_REL_BYTES) > size)
-			rel_fingers = (size - abs_size) / RMI_F11_REL_BYTES;
-		else
-			rel_fingers = sensor->nbr_fingers;
-
-		for (i = 0; i < rel_fingers; i++)
-			rmi_f11_rel_pos_report(f11, i);
-	}
-
-	if (abs_bits) {
 		/*
 		 * the absolute part is made in 2 parts to allow the kernel
 		 * tracking to take place.
@@ -638,7 +619,16 @@ static void rmi_f11_finger_handler(struct f11_data *f11,
 		}
 
 		input_mt_sync_frame(sensor->input);
+	} else if (sensor->report_rel) {
+		if ((abs_size + sensor->nbr_fingers * RMI_F11_REL_BYTES) > size)
+			rel_fingers = (size - abs_size) / RMI_F11_REL_BYTES;
+		else
+			rel_fingers = sensor->nbr_fingers;
+
+		for (i = 0; i < rel_fingers; i++)
+			rmi_f11_rel_pos_report(f11, i);
 	}
+
 }
 
 static int f11_2d_construct_data(struct f11_data *f11)
@@ -1276,8 +1266,9 @@ static int rmi_f11_config(struct rmi_function *fn)
 	return 0;
 }
 
-static int rmi_f11_attention(struct rmi_function *fn, unsigned long *irq_bits)
+static irqreturn_t rmi_f11_attention(int irq, void *ctx)
 {
+	struct rmi_function *fn = ctx;
 	struct rmi_device *rmi_dev = fn->rmi_dev;
 	struct rmi_driver_data *drvdata = dev_get_drvdata(&rmi_dev->dev);
 	struct f11_data *f11 = dev_get_drvdata(&fn->dev);
@@ -1303,13 +1294,12 @@ static int rmi_f11_attention(struct rmi_function *fn, unsigned long *irq_bits)
 				data_base_addr, f11->sensor.data_pkt,
 				f11->sensor.pkt_size);
 		if (error < 0)
-			return error;
+			return IRQ_RETVAL(error);
 	}
 
-	rmi_f11_finger_handler(f11, &f11->sensor, irq_bits,
-				drvdata->num_of_irq_regs, valid_bytes);
+	rmi_f11_finger_handler(f11, &f11->sensor, valid_bytes);
 
-	return 0;
+	return IRQ_HANDLED;
 }
 
 static int rmi_f11_resume(struct rmi_function *fn)

drivers/input/rmi4/rmi_f12.c

@@ -197,10 +197,10 @@ static void rmi_f12_process_objects(struct f12_data *f12, u8 *data1, int size)
 		rmi_2d_sensor_abs_report(sensor, &sensor->objs[i], i);
 }
 
-static int rmi_f12_attention(struct rmi_function *fn,
-			     unsigned long *irq_nr_regs)
+static irqreturn_t rmi_f12_attention(int irq, void *ctx)
 {
 	int retval;
+	struct rmi_function *fn = ctx;
 	struct rmi_device *rmi_dev = fn->rmi_dev;
 	struct rmi_driver_data *drvdata = dev_get_drvdata(&rmi_dev->dev);
 	struct f12_data *f12 = dev_get_drvdata(&fn->dev);
@@ -222,7 +222,7 @@ static int rmi_f12_attention(struct rmi_function *fn,
 		if (retval < 0) {
 			dev_err(&fn->dev, "Failed to read object data. Code: %d.\n",
 				retval);
-			return retval;
+			return IRQ_RETVAL(retval);
 		}
 	}
 
@@ -232,7 +232,7 @@ static int rmi_f12_attention(struct rmi_function *fn,
 
 	input_mt_sync_frame(sensor->input);
 
-	return 0;
+	return IRQ_HANDLED;
 }
 
 static int rmi_f12_write_control_regs(struct rmi_function *fn)

drivers/input/rmi4/rmi_f30.c

@@ -122,8 +122,9 @@ static void rmi_f30_report_button(struct rmi_function *fn,
 	}
 }
 
-static int rmi_f30_attention(struct rmi_function *fn, unsigned long *irq_bits)
+static irqreturn_t rmi_f30_attention(int irq, void *ctx)
 {
+	struct rmi_function *fn = ctx;
 	struct f30_data *f30 = dev_get_drvdata(&fn->dev);
 	struct rmi_driver_data *drvdata = dev_get_drvdata(&fn->rmi_dev->dev);
 	int error;
@@ -134,7 +135,7 @@ static int rmi_f30_attention(struct rmi_function *fn, unsigned long *irq_bits)
 		if (drvdata->attn_data.size < f30->register_count) {
 			dev_warn(&fn->dev,
 				 "F30 interrupted, but data is missing\n");
-			return 0;
+			return IRQ_HANDLED;
 		}
 		memcpy(f30->data_regs, drvdata->attn_data.data,
 			f30->register_count);
@@ -147,7 +148,7 @@ static int rmi_f30_attention(struct rmi_function *fn, unsigned long *irq_bits)
 			dev_err(&fn->dev,
 				"%s: Failed to read F30 data registers: %d\n",
 				__func__, error);
-			return error;
+			return IRQ_RETVAL(error);
 		}
 	}
 
@@ -159,7 +160,7 @@ static int rmi_f30_attention(struct rmi_function *fn, unsigned long *irq_bits)
 			rmi_f03_commit_buttons(f30->f03);
 	}
 
-	return 0;
+	return IRQ_HANDLED;
 }
 
 static int rmi_f30_config(struct rmi_function *fn)

drivers/input/rmi4/rmi_f34.c

@@ -100,8 +100,9 @@ static int rmi_f34_command(struct f34_data *f34, u8 command,
 	return 0;
 }
 
-static int rmi_f34_attention(struct rmi_function *fn, unsigned long *irq_bits)
+static irqreturn_t rmi_f34_attention(int irq, void *ctx)
 {
+	struct rmi_function *fn = ctx;
 	struct f34_data *f34 = dev_get_drvdata(&fn->dev);
 	int ret;
 	u8 status;
@@ -126,7 +127,7 @@ static int rmi_f34_attention(struct rmi_function *fn, unsigned long *irq_bits)
 			complete(&f34->v7.cmd_done);
 	}
 
-	return 0;
+	return IRQ_HANDLED;
 }
 
 static int rmi_f34_write_blocks(struct f34_data *f34, const void *data,

drivers/input/rmi4/rmi_f54.c

@@ -610,11 +610,6 @@ error:
 	mutex_unlock(&f54->data_mutex);
 }
 
-static int rmi_f54_attention(struct rmi_function *fn, unsigned long *irqbits)
-{
-	return 0;
-}
-
 static int rmi_f54_config(struct rmi_function *fn)
 {
 	struct rmi_driver *drv = fn->rmi_dev->driver;
@@ -756,6 +751,5 @@ struct rmi_function_handler rmi_f54_handler = {
 	.func = 0x54,
 	.probe = rmi_f54_probe,
 	.config = rmi_f54_config,
-	.attention = rmi_f54_attention,
 	.remove = rmi_f54_remove,
 };

drivers/input/touchscreen/silead.c

@@ -603,6 +603,7 @@ static const struct acpi_device_id silead_ts_acpi_match[] = {
 	{ "GSL3692", 0 },
 	{ "MSSL1680", 0 },
 	{ "MSSL0001", 0 },
+	{ "MSSL0002", 0 },
 	{ }
 };
 MODULE_DEVICE_TABLE(acpi, silead_ts_acpi_match);

include/linux/input/mt.h

@@ -100,7 +100,7 @@ static inline bool input_is_mt_axis(int axis)
 	return axis == ABS_MT_SLOT || input_is_mt_value(axis);
 }
 
-void input_mt_report_slot_state(struct input_dev *dev,
+bool input_mt_report_slot_state(struct input_dev *dev,
 				unsigned int tool_type, bool active);
 
 void input_mt_report_finger_count(struct input_dev *dev, int count);

include/linux/rmi.h

@@ -354,6 +354,8 @@ struct rmi_driver_data {
 	struct mutex irq_mutex;
 	struct input_dev *input;
 
+	struct irq_domain *irqdomain;
+
 	u8 pdt_props;
 
 	u8 num_rx_electrodes;