|
@@ -0,0 +1,458 @@
|
|
|
+/*
|
|
|
+ * pv88090-regulator.c - Regulator device driver for PV88090
|
|
|
+ * Copyright (C) 2015 Powerventure Semiconductor Ltd.
|
|
|
+ *
|
|
|
+ * This program is free software; you can redistribute it and/or
|
|
|
+ * modify it under the terms of the GNU General Public License
|
|
|
+ * as published by the Free Software Foundation; either version 2
|
|
|
+ * of the License, or (at your option) any later version.
|
|
|
+ *
|
|
|
+ * This program is distributed in the hope that it will be useful,
|
|
|
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
|
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
|
+ * GNU General Public License for more details.
|
|
|
+ */
|
|
|
+
|
|
|
+#include <linux/err.h>
|
|
|
+#include <linux/gpio.h>
|
|
|
+#include <linux/i2c.h>
|
|
|
+#include <linux/module.h>
|
|
|
+#include <linux/init.h>
|
|
|
+#include <linux/slab.h>
|
|
|
+#include <linux/regulator/driver.h>
|
|
|
+#include <linux/regulator/machine.h>
|
|
|
+#include <linux/regmap.h>
|
|
|
+#include <linux/irq.h>
|
|
|
+#include <linux/interrupt.h>
|
|
|
+#include <linux/regulator/of_regulator.h>
|
|
|
+#include <linux/proc_fs.h>
|
|
|
+#include <linux/uaccess.h>
|
|
|
+#include "pv88090-regulator.h"
|
|
|
+
|
|
|
+#define PV88090_MAX_REGULATORS 5
|
|
|
+
|
|
|
+/* PV88090 REGULATOR IDs */
|
|
|
+enum {
|
|
|
+ /* BUCKs */
|
|
|
+ PV88090_ID_BUCK1,
|
|
|
+ PV88090_ID_BUCK2,
|
|
|
+ PV88090_ID_BUCK3,
|
|
|
+
|
|
|
+ /* LDOs */
|
|
|
+ PV88090_ID_LDO1,
|
|
|
+ PV88090_ID_LDO2,
|
|
|
+};
|
|
|
+
|
|
|
+struct pv88090_regulator {
|
|
|
+ struct regulator_desc desc;
|
|
|
+ /* Current limiting */
|
|
|
+ unsigned n_current_limits;
|
|
|
+ const int *current_limits;
|
|
|
+ unsigned int limit_mask;
|
|
|
+ unsigned int conf;
|
|
|
+ unsigned int conf2;
|
|
|
+};
|
|
|
+
|
|
|
+struct pv88090 {
|
|
|
+ struct device *dev;
|
|
|
+ struct regmap *regmap;
|
|
|
+ struct regulator_dev *rdev[PV88090_MAX_REGULATORS];
|
|
|
+};
|
|
|
+
|
|
|
+struct pv88090_buck_voltage {
|
|
|
+ int min_uV;
|
|
|
+ int max_uV;
|
|
|
+ int uV_step;
|
|
|
+};
|
|
|
+
|
|
|
+static const struct regmap_config pv88090_regmap_config = {
|
|
|
+ .reg_bits = 8,
|
|
|
+ .val_bits = 8,
|
|
|
+};
|
|
|
+
|
|
|
+/* Current limits array (in uA) for BUCK1, BUCK2, BUCK3.
|
|
|
+ * Entry indexes corresponds to register values.
|
|
|
+ */
|
|
|
+
|
|
|
+static const int pv88090_buck1_limits[] = {
|
|
|
+ 220000, 440000, 660000, 880000, 1100000, 1320000, 1540000, 1760000,
|
|
|
+ 1980000, 2200000, 2420000, 2640000, 2860000, 3080000, 3300000, 3520000,
|
|
|
+ 3740000, 3960000, 4180000, 4400000, 4620000, 4840000, 5060000, 5280000,
|
|
|
+ 5500000, 5720000, 5940000, 6160000, 6380000, 6600000, 6820000, 7040000
|
|
|
+};
|
|
|
+
|
|
|
+static const int pv88090_buck23_limits[] = {
|
|
|
+ 1496000, 2393000, 3291000, 4189000
|
|
|
+};
|
|
|
+
|
|
|
+static const struct pv88090_buck_voltage pv88090_buck_vol[3] = {
|
|
|
+ {
|
|
|
+ .min_uV = 600000,
|
|
|
+ .max_uV = 1393750,
|
|
|
+ .uV_step = 6250,
|
|
|
+ },
|
|
|
+
|
|
|
+ {
|
|
|
+ .min_uV = 1400000,
|
|
|
+ .max_uV = 2193750,
|
|
|
+ .uV_step = 6250,
|
|
|
+ },
|
|
|
+ {
|
|
|
+ .min_uV = 1250000,
|
|
|
+ .max_uV = 2837500,
|
|
|
+ .uV_step = 12500,
|
|
|
+ },
|
|
|
+};
|
|
|
+
|
|
|
+static unsigned int pv88090_buck_get_mode(struct regulator_dev *rdev)
|
|
|
+{
|
|
|
+ struct pv88090_regulator *info = rdev_get_drvdata(rdev);
|
|
|
+ unsigned int data;
|
|
|
+ int ret, mode = 0;
|
|
|
+
|
|
|
+ ret = regmap_read(rdev->regmap, info->conf, &data);
|
|
|
+ if (ret < 0)
|
|
|
+ return ret;
|
|
|
+
|
|
|
+ switch (data & PV88090_BUCK1_MODE_MASK) {
|
|
|
+ case PV88090_BUCK_MODE_SYNC:
|
|
|
+ mode = REGULATOR_MODE_FAST;
|
|
|
+ break;
|
|
|
+ case PV88090_BUCK_MODE_AUTO:
|
|
|
+ mode = REGULATOR_MODE_NORMAL;
|
|
|
+ break;
|
|
|
+ case PV88090_BUCK_MODE_SLEEP:
|
|
|
+ mode = REGULATOR_MODE_STANDBY;
|
|
|
+ break;
|
|
|
+ }
|
|
|
+
|
|
|
+ return mode;
|
|
|
+}
|
|
|
+
|
|
|
+static int pv88090_buck_set_mode(struct regulator_dev *rdev,
|
|
|
+ unsigned int mode)
|
|
|
+{
|
|
|
+ struct pv88090_regulator *info = rdev_get_drvdata(rdev);
|
|
|
+ int val = 0;
|
|
|
+
|
|
|
+ switch (mode) {
|
|
|
+ case REGULATOR_MODE_FAST:
|
|
|
+ val = PV88090_BUCK_MODE_SYNC;
|
|
|
+ break;
|
|
|
+ case REGULATOR_MODE_NORMAL:
|
|
|
+ val = PV88090_BUCK_MODE_AUTO;
|
|
|
+ break;
|
|
|
+ case REGULATOR_MODE_STANDBY:
|
|
|
+ val = PV88090_BUCK_MODE_SLEEP;
|
|
|
+ break;
|
|
|
+ default:
|
|
|
+ return -EINVAL;
|
|
|
+ }
|
|
|
+
|
|
|
+ return regmap_update_bits(rdev->regmap, info->conf,
|
|
|
+ PV88090_BUCK1_MODE_MASK, val);
|
|
|
+}
|
|
|
+
|
|
|
+static int pv88090_set_current_limit(struct regulator_dev *rdev, int min,
|
|
|
+ int max)
|
|
|
+{
|
|
|
+ struct pv88090_regulator *info = rdev_get_drvdata(rdev);
|
|
|
+ int i;
|
|
|
+
|
|
|
+ /* search for closest to maximum */
|
|
|
+ for (i = info->n_current_limits; i >= 0; i--) {
|
|
|
+ if (min <= info->current_limits[i]
|
|
|
+ && max >= info->current_limits[i]) {
|
|
|
+ return regmap_update_bits(rdev->regmap,
|
|
|
+ info->conf,
|
|
|
+ info->limit_mask,
|
|
|
+ i << PV88090_BUCK1_ILIM_SHIFT);
|
|
|
+ }
|
|
|
+ }
|
|
|
+
|
|
|
+ return -EINVAL;
|
|
|
+}
|
|
|
+
|
|
|
+static int pv88090_get_current_limit(struct regulator_dev *rdev)
|
|
|
+{
|
|
|
+ struct pv88090_regulator *info = rdev_get_drvdata(rdev);
|
|
|
+ unsigned int data;
|
|
|
+ int ret;
|
|
|
+
|
|
|
+ ret = regmap_read(rdev->regmap, info->conf, &data);
|
|
|
+ if (ret < 0)
|
|
|
+ return ret;
|
|
|
+
|
|
|
+ data = (data & info->limit_mask) >> PV88090_BUCK1_ILIM_SHIFT;
|
|
|
+ return info->current_limits[data];
|
|
|
+}
|
|
|
+
|
|
|
+static struct regulator_ops pv88090_buck_ops = {
|
|
|
+ .get_mode = pv88090_buck_get_mode,
|
|
|
+ .set_mode = pv88090_buck_set_mode,
|
|
|
+ .enable = regulator_enable_regmap,
|
|
|
+ .disable = regulator_disable_regmap,
|
|
|
+ .is_enabled = regulator_is_enabled_regmap,
|
|
|
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
|
|
|
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
|
|
|
+ .list_voltage = regulator_list_voltage_linear,
|
|
|
+ .set_current_limit = pv88090_set_current_limit,
|
|
|
+ .get_current_limit = pv88090_get_current_limit,
|
|
|
+};
|
|
|
+
|
|
|
+static struct regulator_ops pv88090_ldo_ops = {
|
|
|
+ .enable = regulator_enable_regmap,
|
|
|
+ .disable = regulator_disable_regmap,
|
|
|
+ .is_enabled = regulator_is_enabled_regmap,
|
|
|
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
|
|
|
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
|
|
|
+ .list_voltage = regulator_list_voltage_linear,
|
|
|
+};
|
|
|
+
|
|
|
+#define PV88090_BUCK(chip, regl_name, min, step, max, limits_array) \
|
|
|
+{\
|
|
|
+ .desc = {\
|
|
|
+ .id = chip##_ID_##regl_name,\
|
|
|
+ .name = __stringify(chip##_##regl_name),\
|
|
|
+ .of_match = of_match_ptr(#regl_name),\
|
|
|
+ .regulators_node = of_match_ptr("regulators"),\
|
|
|
+ .type = REGULATOR_VOLTAGE,\
|
|
|
+ .owner = THIS_MODULE,\
|
|
|
+ .ops = &pv88090_buck_ops,\
|
|
|
+ .min_uV = min, \
|
|
|
+ .uV_step = step, \
|
|
|
+ .n_voltages = ((max) - (min))/(step) + 1, \
|
|
|
+ .enable_reg = PV88090_REG_##regl_name##_CONF0, \
|
|
|
+ .enable_mask = PV88090_##regl_name##_EN, \
|
|
|
+ .vsel_reg = PV88090_REG_##regl_name##_CONF0, \
|
|
|
+ .vsel_mask = PV88090_V##regl_name##_MASK, \
|
|
|
+ },\
|
|
|
+ .current_limits = limits_array, \
|
|
|
+ .n_current_limits = ARRAY_SIZE(limits_array), \
|
|
|
+ .limit_mask = PV88090_##regl_name##_ILIM_MASK, \
|
|
|
+ .conf = PV88090_REG_##regl_name##_CONF1, \
|
|
|
+ .conf2 = PV88090_REG_##regl_name##_CONF2, \
|
|
|
+}
|
|
|
+
|
|
|
+#define PV88090_LDO(chip, regl_name, min, step, max) \
|
|
|
+{\
|
|
|
+ .desc = {\
|
|
|
+ .id = chip##_ID_##regl_name,\
|
|
|
+ .name = __stringify(chip##_##regl_name),\
|
|
|
+ .of_match = of_match_ptr(#regl_name),\
|
|
|
+ .regulators_node = of_match_ptr("regulators"),\
|
|
|
+ .type = REGULATOR_VOLTAGE,\
|
|
|
+ .owner = THIS_MODULE,\
|
|
|
+ .ops = &pv88090_ldo_ops,\
|
|
|
+ .min_uV = min, \
|
|
|
+ .uV_step = step, \
|
|
|
+ .n_voltages = ((max) - (min))/(step) + 1, \
|
|
|
+ .enable_reg = PV88090_REG_##regl_name##_CONT, \
|
|
|
+ .enable_mask = PV88090_##regl_name##_EN, \
|
|
|
+ .vsel_reg = PV88090_REG_##regl_name##_CONT, \
|
|
|
+ .vsel_mask = PV88090_V##regl_name##_MASK, \
|
|
|
+ },\
|
|
|
+}
|
|
|
+
|
|
|
+static struct pv88090_regulator pv88090_regulator_info[] = {
|
|
|
+ PV88090_BUCK(PV88090, BUCK1, 600000, 6250, 1393750,
|
|
|
+ pv88090_buck1_limits),
|
|
|
+ PV88090_BUCK(PV88090, BUCK2, 600000, 6250, 1393750,
|
|
|
+ pv88090_buck23_limits),
|
|
|
+ PV88090_BUCK(PV88090, BUCK3, 600000, 6250, 1393750,
|
|
|
+ pv88090_buck23_limits),
|
|
|
+ PV88090_LDO(PV88090, LDO1, 1200000, 50000, 4350000),
|
|
|
+ PV88090_LDO(PV88090, LDO2, 650000, 25000, 2225000),
|
|
|
+};
|
|
|
+
|
|
|
+static irqreturn_t pv88090_irq_handler(int irq, void *data)
|
|
|
+{
|
|
|
+ struct pv88090 *chip = data;
|
|
|
+ int i, reg_val, err, ret = IRQ_NONE;
|
|
|
+
|
|
|
+ err = regmap_read(chip->regmap, PV88090_REG_EVENT_A, ®_val);
|
|
|
+ if (err < 0)
|
|
|
+ goto error_i2c;
|
|
|
+
|
|
|
+ if (reg_val & PV88090_E_VDD_FLT) {
|
|
|
+ for (i = 0; i < PV88090_MAX_REGULATORS; i++) {
|
|
|
+ if (chip->rdev[i] != NULL) {
|
|
|
+ regulator_notifier_call_chain(chip->rdev[i],
|
|
|
+ REGULATOR_EVENT_UNDER_VOLTAGE,
|
|
|
+ NULL);
|
|
|
+ }
|
|
|
+ }
|
|
|
+
|
|
|
+ err = regmap_update_bits(chip->regmap, PV88090_REG_EVENT_A,
|
|
|
+ PV88090_E_VDD_FLT, PV88090_E_VDD_FLT);
|
|
|
+ if (err < 0)
|
|
|
+ goto error_i2c;
|
|
|
+
|
|
|
+ ret = IRQ_HANDLED;
|
|
|
+ }
|
|
|
+
|
|
|
+ if (reg_val & PV88090_E_OVER_TEMP) {
|
|
|
+ for (i = 0; i < PV88090_MAX_REGULATORS; i++) {
|
|
|
+ if (chip->rdev[i] != NULL) {
|
|
|
+ regulator_notifier_call_chain(chip->rdev[i],
|
|
|
+ REGULATOR_EVENT_OVER_TEMP,
|
|
|
+ NULL);
|
|
|
+ }
|
|
|
+ }
|
|
|
+
|
|
|
+ err = regmap_update_bits(chip->regmap, PV88090_REG_EVENT_A,
|
|
|
+ PV88090_E_OVER_TEMP, PV88090_E_OVER_TEMP);
|
|
|
+ if (err < 0)
|
|
|
+ goto error_i2c;
|
|
|
+
|
|
|
+ ret = IRQ_HANDLED;
|
|
|
+ }
|
|
|
+
|
|
|
+ return ret;
|
|
|
+
|
|
|
+error_i2c:
|
|
|
+ dev_err(chip->dev, "I2C error : %d\n", err);
|
|
|
+ return IRQ_NONE;
|
|
|
+}
|
|
|
+
|
|
|
+/*
|
|
|
+ * I2C driver interface functions
|
|
|
+ */
|
|
|
+static int pv88090_i2c_probe(struct i2c_client *i2c,
|
|
|
+ const struct i2c_device_id *id)
|
|
|
+{
|
|
|
+ struct regulator_init_data *init_data = dev_get_platdata(&i2c->dev);
|
|
|
+ struct pv88090 *chip;
|
|
|
+ struct regulator_config config = { };
|
|
|
+ int error, i, ret = 0;
|
|
|
+ unsigned int conf2, range, index;
|
|
|
+
|
|
|
+ chip = devm_kzalloc(&i2c->dev, sizeof(struct pv88090), GFP_KERNEL);
|
|
|
+ if (!chip)
|
|
|
+ return -ENOMEM;
|
|
|
+
|
|
|
+ chip->dev = &i2c->dev;
|
|
|
+ chip->regmap = devm_regmap_init_i2c(i2c, &pv88090_regmap_config);
|
|
|
+ if (IS_ERR(chip->regmap)) {
|
|
|
+ error = PTR_ERR(chip->regmap);
|
|
|
+ dev_err(chip->dev, "Failed to allocate register map: %d\n",
|
|
|
+ error);
|
|
|
+ return error;
|
|
|
+ }
|
|
|
+
|
|
|
+ i2c_set_clientdata(i2c, chip);
|
|
|
+
|
|
|
+ if (i2c->irq != 0) {
|
|
|
+ ret = regmap_write(chip->regmap, PV88090_REG_MASK_A, 0xFF);
|
|
|
+ if (ret < 0) {
|
|
|
+ dev_err(chip->dev,
|
|
|
+ "Failed to mask A reg: %d\n", ret);
|
|
|
+ return ret;
|
|
|
+ }
|
|
|
+
|
|
|
+ ret = regmap_write(chip->regmap, PV88090_REG_MASK_B, 0xFF);
|
|
|
+ if (ret < 0) {
|
|
|
+ dev_err(chip->dev,
|
|
|
+ "Failed to mask B reg: %d\n", ret);
|
|
|
+ return ret;
|
|
|
+ }
|
|
|
+
|
|
|
+ ret = request_threaded_irq(i2c->irq, NULL,
|
|
|
+ pv88090_irq_handler,
|
|
|
+ IRQF_TRIGGER_LOW|IRQF_ONESHOT,
|
|
|
+ "pv88090", chip);
|
|
|
+ if (ret != 0) {
|
|
|
+ dev_err(chip->dev, "Failed to request IRQ: %d\n",
|
|
|
+ i2c->irq);
|
|
|
+ return ret;
|
|
|
+ }
|
|
|
+
|
|
|
+ ret = regmap_update_bits(chip->regmap, PV88090_REG_MASK_A,
|
|
|
+ PV88090_M_VDD_FLT | PV88090_M_OVER_TEMP, 0);
|
|
|
+ if (ret < 0) {
|
|
|
+ dev_err(chip->dev,
|
|
|
+ "Failed to update mask reg: %d\n", ret);
|
|
|
+ return ret;
|
|
|
+ }
|
|
|
+
|
|
|
+ } else {
|
|
|
+ dev_warn(chip->dev, "No IRQ configured\n");
|
|
|
+ }
|
|
|
+
|
|
|
+ config.dev = chip->dev;
|
|
|
+ config.regmap = chip->regmap;
|
|
|
+
|
|
|
+ for (i = 0; i < PV88090_MAX_REGULATORS; i++) {
|
|
|
+ if (init_data)
|
|
|
+ config.init_data = &init_data[i];
|
|
|
+
|
|
|
+ if (i == PV88090_ID_BUCK2 || i == PV88090_ID_BUCK3) {
|
|
|
+ ret = regmap_read(chip->regmap,
|
|
|
+ pv88090_regulator_info[i].conf2, &conf2);
|
|
|
+ if (ret < 0)
|
|
|
+ return ret;
|
|
|
+
|
|
|
+ conf2 = ((conf2 >> PV88090_BUCK_VDAC_RANGE_SHIFT)
|
|
|
+ && PV88090_BUCK_VDAC_RANGE_MASK);
|
|
|
+
|
|
|
+ ret = regmap_read(chip->regmap,
|
|
|
+ PV88090_REG_BUCK_FOLD_RANGE, &range);
|
|
|
+ if (ret < 0)
|
|
|
+ return ret;
|
|
|
+
|
|
|
+ range = ((range
|
|
|
+ >> (PV88080_BUCK_VRANGE_GAIN_SHIFT + i - 1))
|
|
|
+ && PV88080_BUCK_VRANGE_GAIN_MASK);
|
|
|
+ index = ((range << 1) | conf2);
|
|
|
+
|
|
|
+ pv88090_regulator_info[i].desc.min_uV
|
|
|
+ = pv88090_buck_vol[index].min_uV;
|
|
|
+ pv88090_regulator_info[i].desc.uV_step
|
|
|
+ = pv88090_buck_vol[index].uV_step;
|
|
|
+ pv88090_regulator_info[i].desc.n_voltages
|
|
|
+ = ((pv88090_buck_vol[index].max_uV)
|
|
|
+ - (pv88090_buck_vol[index].min_uV))
|
|
|
+ /(pv88090_buck_vol[index].uV_step) + 1;
|
|
|
+ }
|
|
|
+
|
|
|
+ config.driver_data = (void *)&pv88090_regulator_info[i];
|
|
|
+ chip->rdev[i] = devm_regulator_register(chip->dev,
|
|
|
+ &pv88090_regulator_info[i].desc, &config);
|
|
|
+ if (IS_ERR(chip->rdev[i])) {
|
|
|
+ dev_err(chip->dev,
|
|
|
+ "Failed to register PV88090 regulator\n");
|
|
|
+ return PTR_ERR(chip->rdev[i]);
|
|
|
+ }
|
|
|
+ }
|
|
|
+
|
|
|
+ return 0;
|
|
|
+}
|
|
|
+
|
|
|
+static const struct i2c_device_id pv88090_i2c_id[] = {
|
|
|
+ {"pv88090", 0},
|
|
|
+ {},
|
|
|
+};
|
|
|
+MODULE_DEVICE_TABLE(i2c, pv88090_i2c_id);
|
|
|
+
|
|
|
+#ifdef CONFIG_OF
|
|
|
+static const struct of_device_id pv88090_dt_ids[] = {
|
|
|
+ { .compatible = "pvs,pv88090", .data = &pv88090_i2c_id[0] },
|
|
|
+ {},
|
|
|
+};
|
|
|
+MODULE_DEVICE_TABLE(of, pv88090_dt_ids);
|
|
|
+#endif
|
|
|
+
|
|
|
+static struct i2c_driver pv88090_regulator_driver = {
|
|
|
+ .driver = {
|
|
|
+ .name = "pv88090",
|
|
|
+ .of_match_table = of_match_ptr(pv88090_dt_ids),
|
|
|
+ },
|
|
|
+ .probe = pv88090_i2c_probe,
|
|
|
+ .id_table = pv88090_i2c_id,
|
|
|
+};
|
|
|
+
|
|
|
+module_i2c_driver(pv88090_regulator_driver);
|
|
|
+
|
|
|
+MODULE_AUTHOR("James Ban <James.Ban.opensource@diasemi.com>");
|
|
|
+MODULE_DESCRIPTION("Regulator device driver for Powerventure PV88090");
|
|
|
+MODULE_LICENSE("GPL");
|