[media] mceusb: TX -EPIPE (urb status = -32) lockup fix

Once IR blasting or mceusb device commands fail with mce_async_callback()
TX -EPIPE error, all subsequent TX to device then fail with the same error.
...
[  249.986174] mceusb 1-1.2:1.0: requesting 38000 HZ carrier
[  249.986210] mceusb 1-1.2:1.0: send request called (size=0x4)
[  249.986256] mceusb 1-1.2:1.0: send request complete (res=0)
[  249.986403] mceusb 1-1.2:1.0: Error: request urb status = -32 (TX HALT)
[  249.999885] mceusb 1-1.2:1.0: send request called (size=0x3)
[  249.999929] mceusb 1-1.2:1.0: send request complete (res=0)
[  250.000013] mceusb 1-1.2:1.0: Error: request urb status = -32 (TX HALT)
[  250.019830] mceusb 1-1.2:1.0: send request called (size=0x21)
[  250.019868] mceusb 1-1.2:1.0: send request complete (res=0)
[  250.020007] mceusb 1-1.2:1.0: Error: request urb status = -32 (TX HALT)
...

Fault simulation/injection is by executing the following USB operation
in a mceusb instrumented driver, prior to TX I/O.
    retval = usb_control_msg(ir->usbdev, usb_sndctrlpipe(ir->usbdev, 0),
	USB_REQ_SET_FEATURE, USB_RECIP_ENDPOINT,
	USB_ENDPOINT_HALT, usb_pipeendpoint(ir->pipe_out),
	NULL, 0, USB_CTRL_SET_TIMEOUT);
    dev_dbg(ir->dev, "set halt retval, %d", retval);

After setting halt state for the TX endpoint, perform an lirc "irsend"
to generate TX traffic to device. After the TX HALT, the patch restores
subsequent TX to working state.
...
[  508.009638] mceusb 1-1.2:1.0: send request called (size=0x3)
[  508.009697] mceusb 1-1.2:1.0: send request complete (res=0)
[  508.009847] mce_async_callback()
[  508.009864] mceusb 1-1.2:1.0: Error: request urb status = -32 (TX HALT)
[  508.009890] mceusb 1-1.2:1.0: kevent 0 scheduled
[  508.021552] mceusb 1-1.2:1.0: send request called (size=0x21)
[  508.021598] mceusb 1-1.2:1.0: send request complete (res=0)
[  508.021963] mce_async_callback()
[  508.021981] mceusb 1-1.2:1.0: tx data: 84 b0 0c 8c 0c 84 8c 0c 8c 0c 84 8c 0c 8c 0c 84 98 0c 98 0c 84 98 0c 8c 0c 84 8c 0c 8c 0c 81 8c 80 (length=33)
[  508.021997] mceusb 1-1.2:1.0: Raw IR data, 0 pulse/space samples
[  508.066627] mceusb 1-1.2:1.0: send request called (size=0x3)
[  508.066669] mceusb 1-1.2:1.0: send request complete (res=0)
[  508.066841] mce_async_callback()
[  508.066858] mceusb 1-1.2:1.0: tx data: 9f 08 03 (length=3)
...

Signed-off-by: A Sun <as1033x@comcast.net>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

drivers/media/rc/mceusb.c

@@ -419,6 +419,7 @@ struct mceusb_dev {
 	struct urb *urb_in;
 	unsigned int pipe_in;
 	struct usb_endpoint_descriptor *usb_ep_out;
+	unsigned int pipe_out;
 
 	/* buffers and dma */
 	unsigned char *buf_in;
@@ -739,6 +740,11 @@ static void mce_async_callback(struct urb *urb)
 		break;
 
 	case -EPIPE:
+		dev_err(ir->dev, "Error: request urb status = %d (TX HALT)",
+			urb->status);
+		mceusb_defer_kevent(ir, EVENT_TX_HALT);
+		break;
+
 	default:
 		dev_err(ir->dev, "Error: request urb status = %d", urb->status);
 		break;
@@ -753,7 +759,7 @@ static void mce_async_callback(struct urb *urb)
 static void mce_request_packet(struct mceusb_dev *ir, unsigned char *data,
 								int size)
 {
-	int res, pipe;
+	int res;
 	struct urb *async_urb;
 	struct device *dev = ir->dev;
 	unsigned char *async_buf;
@@ -771,19 +777,14 @@ static void mce_request_packet(struct mceusb_dev *ir, unsigned char *data,
 	}
 
 	/* outbound data */
-	if (usb_endpoint_xfer_int(ir->usb_ep_out)) {
-		pipe = usb_sndintpipe(ir->usbdev,
-				 ir->usb_ep_out->bEndpointAddress);
-		usb_fill_int_urb(async_urb, ir->usbdev, pipe, async_buf,
-				 size, mce_async_callback, ir,
+	if (usb_endpoint_xfer_int(ir->usb_ep_out))
+		usb_fill_int_urb(async_urb, ir->usbdev, ir->pipe_out,
+				 async_buf, size, mce_async_callback, ir,
 				 ir->usb_ep_out->bInterval);
-	} else {
-		pipe = usb_sndbulkpipe(ir->usbdev,
-				 ir->usb_ep_out->bEndpointAddress);
-		usb_fill_bulk_urb(async_urb, ir->usbdev, pipe,
-				 async_buf, size, mce_async_callback,
-				 ir);
-	}
+	else
+		usb_fill_bulk_urb(async_urb, ir->usbdev, ir->pipe_out,
+				  async_buf, size, mce_async_callback, ir);
+
 	memcpy(async_buf, data, size);
 
 	dev_dbg(dev, "send request called (size=%#x)", size);
@@ -1222,16 +1223,24 @@ static void mceusb_deferred_kevent(struct work_struct *work)
 		if (status < 0) {
 			dev_err(ir->dev, "rx clear halt error %d",
 				status);
-			return;
 		}
 		clear_bit(EVENT_RX_HALT, &ir->kevent_flags);
-		status = usb_submit_urb(ir->urb_in, GFP_KERNEL);
-		if (status < 0) {
-			dev_err(ir->dev, "rx unhalt submit urb error %d",
-				status);
-			return;
+		if (status == 0) {
+			status = usb_submit_urb(ir->urb_in, GFP_KERNEL);
+			if (status < 0) {
+				dev_err(ir->dev,
+					"rx unhalt submit urb error %d",
+					status);
+			}
 		}
 	}
+
+	if (test_bit(EVENT_TX_HALT, &ir->kevent_flags)) {
+		status = usb_clear_halt(ir->usbdev, ir->pipe_out);
+		if (status < 0)
+			dev_err(ir->dev, "tx clear halt error %d", status);
+		clear_bit(EVENT_TX_HALT, &ir->kevent_flags);
+	}
 }
 
 static struct rc_dev *mceusb_init_rc_dev(struct mceusb_dev *ir)
@@ -1386,6 +1395,12 @@ static int mceusb_dev_probe(struct usb_interface *intf,
 
 	/* Saving usb interface data for use by the transmitter routine */
 	ir->usb_ep_out = ep_out;
+	if (usb_endpoint_xfer_int(ep_out))
+		ir->pipe_out = usb_sndintpipe(ir->usbdev,
+					      ep_out->bEndpointAddress);
+	else
+		ir->pipe_out = usb_sndbulkpipe(ir->usbdev,
+					       ep_out->bEndpointAddress);
 
 	if (dev->descriptor.iManufacturer
 	    && usb_string(dev, dev->descriptor.iManufacturer,