Merge branch 'imx/devel' into next/dt

The board changes in the imx/devel branch conflict with other changes in
the device imx/dt branch.

Conflicts:
	arch/arm/mach-mx5/board-mx53_loco.c
	arch/arm/mach-mx5/board-mx53_smd.c
	arch/arm/plat-mxc/include/mach/common.h
	arch/arm/plat-mxc/include/mach/memory.h

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

arch/arm/Kconfig

@@ -413,6 +413,7 @@ config ARCH_MXC
 	select CLKSRC_MMIO
 	select GENERIC_IRQ_CHIP
 	select HAVE_SCHED_CLOCK
+	select MULTI_IRQ_HANDLER
 	help
 	  Support for Freescale MXC/iMX-based family of processors
 

arch/arm/Makefile

@@ -157,9 +157,7 @@ machine-$(CONFIG_ARCH_LPC32XX)		:= lpc32xx
 machine-$(CONFIG_ARCH_MMP)		:= mmp
 machine-$(CONFIG_ARCH_MSM)		:= msm
 machine-$(CONFIG_ARCH_MV78XX0)		:= mv78xx0
-machine-$(CONFIG_ARCH_MX1)		:= imx
-machine-$(CONFIG_ARCH_MX2)		:= imx
-machine-$(CONFIG_ARCH_MX25)		:= imx
+machine-$(CONFIG_ARCH_IMX_V4_V5)	:= imx
 machine-$(CONFIG_ARCH_MX3)		:= imx
 machine-$(CONFIG_ARCH_MX5)		:= mx5
 machine-$(CONFIG_ARCH_MXS)		:= mxs

arch/arm/configs/mx27_defconfig → arch/arm/configs/imx_v4_v5_defconfig

@@ -3,9 +3,7 @@ CONFIG_EXPERIMENTAL=y
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_EXPERT=y
-CONFIG_KALLSYMS_EXTRA_PASS=y
 # CONFIG_COMPAT_BRK is not set
 CONFIG_SLAB=y
 CONFIG_PROFILING=y
@@ -17,8 +15,12 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
 CONFIG_ARCH_MXC=y
-CONFIG_ARCH_MX2=y
-CONFIG_MACH_MX27=y
+CONFIG_ARCH_IMX_V4_V5=y
+CONFIG_ARCH_MX1ADS=y
+CONFIG_MACH_SCB9328=y
+CONFIG_MACH_MX21ADS=y
+CONFIG_MACH_MX25_3DS=y
+CONFIG_MACH_EUKREA_CPUIMX25=y
 CONFIG_MACH_MX27ADS=y
 CONFIG_MACH_PCM038=y
 CONFIG_MACH_CPUIMX27=y
@@ -29,6 +31,7 @@ CONFIG_MACH_IMX27_VISSTRIM_M10=y
 CONFIG_MACH_IMX27LITE=y
 CONFIG_MACH_PCA100=y
 CONFIG_MACH_MXT_TD60=y
+CONFIG_MACH_IMX27IPCAM=y
 CONFIG_MXC_IRQ_PRIOR=y
 CONFIG_MXC_PWM=y
 CONFIG_NO_HZ=y
@@ -39,7 +42,6 @@ CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_FPE_NWFPE=y
 CONFIG_FPE_NWFPE_XP=y
-CONFIG_PM=y
 CONFIG_PM_DEBUG=y
 CONFIG_NET=y
 CONFIG_PACKET=y
@@ -55,8 +57,9 @@ CONFIG_IP_PNP_DHCP=y
 # CONFIG_INET_DIAG is not set
 # CONFIG_IPV6 is not set
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
 CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
@@ -69,12 +72,15 @@ CONFIG_MTD_CFI_GEOMETRY=y
 CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_PHYSMAP=y
 CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_MXC=y
 CONFIG_MTD_UBI=y
+CONFIG_MISC_DEVICES=y
 CONFIG_EEPROM_AT24=y
+CONFIG_EEPROM_AT25=y
 CONFIG_NETDEVICES=y
 CONFIG_NET_ETHERNET=y
-CONFIG_FEC=y
+CONFIG_SMC91X=y
+CONFIG_DM9000=y
+CONFIG_SMC911X=y
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_INPUT_MOUSEDEV is not set
@@ -84,10 +90,10 @@ CONFIG_INPUT_EVDEV=y
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_ADS7846=m
 # CONFIG_SERIO is not set
+# CONFIG_LEGACY_PTYS is not set
 CONFIG_SERIAL_8250=m
 CONFIG_SERIAL_IMX=y
 CONFIG_SERIAL_IMX_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
 # CONFIG_HW_RANDOM is not set
 CONFIG_I2C=y
 CONFIG_I2C_CHARDEV=y
@@ -98,19 +104,56 @@ CONFIG_W1=y
 CONFIG_W1_MASTER_MXC=y
 CONFIG_W1_SLAVE_THERM=y
 # CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_IMX2_WDT=y
+CONFIG_MFD_MC13XXX=y
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_MC13783=y
+CONFIG_REGULATOR_MC13892=y
 CONFIG_FB=y
 CONFIG_FB_IMX=y
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_PWM=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_FONTS=y
 CONFIG_FONT_8x8=y
-# CONFIG_HID_SUPPORT is not set
-CONFIG_USB=m
+CONFIG_LOGO=y
+CONFIG_SOUND=y
+CONFIG_SND=y
+# CONFIG_SND_ARM is not set
+# CONFIG_SND_SPI is not set
+CONFIG_SND_SOC=y
+CONFIG_SND_IMX_SOC=y
+CONFIG_SND_SOC_MX27VIS_AIC32X4=y
+CONFIG_SND_SOC_PHYCORE_AC97=y
+CONFIG_SND_SOC_EUKREA_TLV320=y
+CONFIG_USB_HID=m
+CONFIG_USB=y
 # CONFIG_USB_DEVICE_CLASS is not set
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_MXC=y
 CONFIG_USB_ULPI=y
 CONFIG_MMC=y
 CONFIG_MMC_MXC=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_MC13783=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_BACKLIGHT=y
+CONFIG_LEDS_TRIGGER_GPIO=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_PCF8563=y
+CONFIG_RTC_DRV_IMXDI=y
+CONFIG_RTC_MXC=y
+CONFIG_DMADEVICES=y
+CONFIG_IMX_SDMA=y
+CONFIG_IMX_DMA=y
+# CONFIG_IOMMU_SUPPORT is not set
 # CONFIG_DNOTIFY is not set
 # CONFIG_PROC_PAGE_MONITOR is not set
 CONFIG_TMPFS=y
@@ -119,12 +162,9 @@ CONFIG_UBIFS_FS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_ROOT_NFS=y
-CONFIG_NLS=y
 CONFIG_NLS_CODEPAGE_437=m
 CONFIG_NLS_CODEPAGE_850=m
 CONFIG_NLS_ISO8859_1=y
 CONFIG_NLS_ISO8859_15=m
-CONFIG_DEBUG_FS=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_CRYPTO_ANSI_CPRNG is not set

arch/arm/configs/mx1_defconfig

@@ -1,91 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_EXPERT=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_MXC=y
-CONFIG_ARCH_MX1=y
-CONFIG_ARCH_MX1ADS=y
-CONFIG_MACH_SCB9328=y
-CONFIG_MACH_APF9328=y
-CONFIG_MXC_IRQ_PRIOR=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_PREEMPT=y
-CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="noinitrd console=ttymxc0,115200 root=/dev/mtdblock2 rw ip=off"
-CONFIG_PM=y
-CONFIG_PM_DEBUG=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_FW_LOADER=m
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_PHYSMAP=y
-# CONFIG_BLK_DEV is not set
-# CONFIG_MISC_DEVICES is not set
-CONFIG_NETDEVICES=y
-CONFIG_PHYLIB=y
-CONFIG_SMSC_PHY=y
-CONFIG_NET_ETHERNET=y
-CONFIG_DM9000=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-# CONFIG_INPUT is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT is not set
-CONFIG_SERIAL_IMX=y
-CONFIG_SERIAL_IMX_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_IMX=y
-CONFIG_W1=y
-CONFIG_W1_MASTER_MXC=y
-CONFIG_W1_SLAVE_THERM=y
-# CONFIG_HWMON is not set
-CONFIG_FB=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_IMX=y
-CONFIG_USB_ETH=m
-CONFIG_MMC=y
-CONFIG_MMC_MXC=y
-# CONFIG_DNOTIFY is not set
-CONFIG_INOTIFY=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-# CONFIG_ENABLE_WARN_DEPRECATED is not set
-# CONFIG_ENABLE_MUST_CHECK is not set
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set

arch/arm/configs/mx21_defconfig

@@ -1,97 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_EXPERT=y
-CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_MXC=y
-CONFIG_ARCH_MX2=y
-CONFIG_MACH_MX21ADS=y
-CONFIG_MXC_PWM=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_PREEMPT=y
-CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_NET=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_FW_LOADER is not set
-CONFIG_MTD=y
-CONFIG_MTD_DEBUG=y
-CONFIG_MTD_DEBUG_VERBOSE=3
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_GEOMETRY=y
-# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_MXC=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-# CONFIG_INPUT_MOUSEDEV is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_SERIO is not set
-# CONFIG_CONSOLE_TRANSLATIONS is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=1
-CONFIG_SERIAL_IMX=y
-CONFIG_SERIAL_IMX_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_IMX=y
-CONFIG_SPI=y
-# CONFIG_HWMON is not set
-CONFIG_FB=y
-CONFIG_FB_IMX=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FONTS=y
-CONFIG_FONT_8x8=y
-CONFIG_LOGO=y
-# CONFIG_HID_SUPPORT is not set
-# CONFIG_USB_SUPPORT is not set
-CONFIG_MMC=y
-CONFIG_MMC_MXC=y
-# CONFIG_DNOTIFY is not set
-CONFIG_MSDOS_FS=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set

arch/arm/configs/mx51_defconfig → arch/arm/configs/mx5_defconfig

@@ -1,5 +1,6 @@
 CONFIG_EXPERIMENTAL=y
 # CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_KERNEL_LZO=y
 CONFIG_SYSVIPC=y
 CONFIG_LOG_BUF_SHIFT=18
 CONFIG_RELAY=y
@@ -13,21 +14,29 @@ CONFIG_MODULE_SRCVERSION_ALL=y
 # CONFIG_LBDAF is not set
 # CONFIG_BLK_DEV_BSG is not set
 CONFIG_ARCH_MXC=y
-CONFIG_ARCH_MX51=y
+CONFIG_ARCH_MX5=y
 CONFIG_MACH_MX51_BABBAGE=y
 CONFIG_MACH_MX51_3DS=y
 CONFIG_MACH_EUKREA_CPUIMX51=y
+CONFIG_MACH_EUKREA_CPUIMX51SD=y
+CONFIG_MACH_MX51_EFIKAMX=y
+CONFIG_MACH_MX51_EFIKASB=y
+CONFIG_MACH_MX53_EVK=y
+CONFIG_MACH_MX53_SMD=y
+CONFIG_MACH_MX53_LOCO=y
+CONFIG_MACH_MX53_ARD=y
+CONFIG_MXC_PWM=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
+CONFIG_VMSPLIT_2G=y
 CONFIG_PREEMPT_VOLUNTARY=y
 CONFIG_AEABI=y
 # CONFIG_OABI_COMPAT is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=32768
-CONFIG_CMDLINE="noinitrd console=ttymxc0,115200 root=/dev/nfs nfsroot=192.168.0.101:/shared/nfs ip=dhcp"
+CONFIG_CMDLINE="noinitrd console=ttymxc0,115200"
 CONFIG_VFP=y
 CONFIG_NEON=y
 CONFIG_BINFMT_MISC=m
-CONFIG_PM=y
 CONFIG_PM_DEBUG=y
 CONFIG_PM_TEST_SUSPEND=y
 CONFIG_NET=y
@@ -42,13 +51,13 @@ CONFIG_IP_PNP_DHCP=y
 # CONFIG_INET_LRO is not set
 # CONFIG_IPV6 is not set
 # CONFIG_WIRELESS is not set
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
 # CONFIG_STANDALONE is not set
 CONFIG_CONNECTOR=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=65536
-# CONFIG_MISC_DEVICES is not set
-CONFIG_SCSI=y
 # CONFIG_SCSI_PROC_FS is not set
 CONFIG_BLK_DEV_SD=y
 CONFIG_SCSI_MULTI_LUN=y
@@ -56,8 +65,10 @@ CONFIG_SCSI_CONSTANTS=y
 CONFIG_SCSI_LOGGING=y
 CONFIG_SCSI_SCAN_ASYNC=y
 # CONFIG_SCSI_LOWLEVEL is not set
-CONFIG_ATA=m
+CONFIG_ATA=y
+CONFIG_PATA_IMX=y
 CONFIG_NETDEVICES=y
+CONFIG_MII=m
 CONFIG_MARVELL_PHY=y
 CONFIG_DAVICOM_PHY=y
 CONFIG_QSEMI_PHY=y
@@ -71,49 +82,57 @@ CONFIG_REALTEK_PHY=y
 CONFIG_NATIONAL_PHY=y
 CONFIG_STE10XP=y
 CONFIG_LSI_ET1011C_PHY=y
-CONFIG_MDIO_BITBANG=y
-CONFIG_MDIO_GPIO=y
+CONFIG_MICREL_PHY=y
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=m
-CONFIG_FEC=y
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_WLAN is not set
-CONFIG_INPUT_FF_MEMLESS=m
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
 CONFIG_INPUT_EVDEV=y
-CONFIG_KEYBOARD_GPIO=y
 CONFIG_INPUT_EVBUG=m
+CONFIG_KEYBOARD_GPIO=y
 CONFIG_MOUSE_PS2=m
 CONFIG_MOUSE_PS2_ELANTECH=y
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_MMA8450=y
 CONFIG_SERIO_SERPORT=m
 CONFIG_VT_HW_CONSOLE_BINDING=y
+# CONFIG_LEGACY_PTYS is not set
 # CONFIG_DEVKMEM is not set
 CONFIG_SERIAL_IMX=y
 CONFIG_SERIAL_IMX_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
 CONFIG_HW_RANDOM=y
 CONFIG_I2C=y
 # CONFIG_I2C_COMPAT is not set
-CONFIG_I2C_CHARDEV=m
+CONFIG_I2C_CHARDEV=y
 # CONFIG_I2C_HELPER_AUTO is not set
 CONFIG_I2C_ALGOBIT=m
 CONFIG_I2C_ALGOPCF=m
 CONFIG_I2C_ALGOPCA=m
+CONFIG_I2C_IMX=y
+CONFIG_SPI=y
+CONFIG_SPI_IMX=y
 CONFIG_GPIO_SYSFS=y
 # CONFIG_HWMON is not set
-# CONFIG_HID_SUPPORT is not set
+CONFIG_WATCHDOG=y
+CONFIG_IMX2_WDT=y
+CONFIG_MFD_MC13XXX=y
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_MC13892=y
 CONFIG_USB=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_MXC=y
 CONFIG_USB_STORAGE=y
 CONFIG_MMC=y
 CONFIG_MMC_BLOCK=m
-CONFIG_MMC_SDHCI=m
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_PLTFM=y
+CONFIG_MMC_SDHCI_ESDHC_IMX=y
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_INTF_DEV_UIE_EMUL=y
+CONFIG_RTC_MXC=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
@@ -127,7 +146,6 @@ CONFIG_EXT4_FS_SECURITY=y
 CONFIG_QUOTA=y
 CONFIG_QUOTA_NETLINK_INTERFACE=y
 # CONFIG_PRINT_QUOTA_WARNING is not set
-CONFIG_AUTOFS_FS=y
 CONFIG_AUTOFS4_FS=y
 CONFIG_FUSE_FS=y
 CONFIG_ISO9660_FS=m
@@ -151,17 +169,13 @@ CONFIG_NLS_ISO8859_15=m
 CONFIG_NLS_UTF8=y
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
 # CONFIG_SCHED_DEBUG is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_FTRACE is not set
 # CONFIG_ARM_UNWIND is not set
-CONFIG_DEBUG_LL=y
-CONFIG_EARLY_PRINTK=y
 CONFIG_SECURITYFS=y
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_LZO=y
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_LZO=m
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
 CONFIG_CRC_CCITT=m

arch/arm/configs/mxs_defconfig

@@ -26,6 +26,7 @@ CONFIG_MACH_MX23EVK=y
 CONFIG_MACH_MX28EVK=y
 CONFIG_MACH_STMP378X_DEVB=y
 CONFIG_MACH_TX28=y
+CONFIG_MACH_M28EVK=y
 # CONFIG_ARM_THUMB is not set
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y

arch/arm/mach-imx/Kconfig

@@ -5,6 +5,18 @@ config IMX_HAVE_DMA_V1
 # Some usages assume that having one of them implies not having (e.g.) ARCH_MX2.
 # To easily distinguish good and reviewed from unreviewed usages new (and IMHO
 # more sensible) names are used: SOC_IMX31 and SOC_IMX35
+config ARCH_MX1
+	bool
+
+config MACH_MX21
+	bool
+
+config ARCH_MX25
+	bool
+
+config MACH_MX27
+	bool
+
 config ARCH_MX31
 	bool
 
@@ -13,6 +25,7 @@ config ARCH_MX35
 
 config SOC_IMX1
 	bool
+	select ARCH_MX1
 	select CPU_ARM920T
 	select IMX_HAVE_DMA_V1
 	select IMX_HAVE_IOMUX_V1
@@ -20,6 +33,7 @@ config SOC_IMX1
 
 config SOC_IMX21
 	bool
+	select MACH_MX21
 	select CPU_ARM926T
 	select ARCH_MXC_AUDMUX_V1
 	select IMX_HAVE_DMA_V1
@@ -28,6 +42,7 @@ config SOC_IMX21
 
 config SOC_IMX25
 	bool
+	select ARCH_MX25
 	select CPU_ARM926T
 	select ARCH_MXC_AUDMUX_V2
 	select ARCH_MXC_IOMUX_V3
@@ -35,6 +50,7 @@ config SOC_IMX25
 
 config SOC_IMX27
 	bool
+	select MACH_MX27
 	select CPU_ARM926T
 	select ARCH_MXC_AUDMUX_V1
 	select IMX_HAVE_DMA_V1
@@ -59,7 +75,7 @@ config SOC_IMX35
 	select MXC_AVIC
 
 
-if ARCH_MX1
+if ARCH_IMX_V4_V5
 
 comment "MX1 platforms:"
 config MACH_MXLADS
@@ -87,30 +103,6 @@ config MACH_APF9328
 	help
 	  Say Yes here if you are using the Armadeus APF9328 development board
 
-endif
-
-if ARCH_MX2
-
-choice
-	prompt "CPUs:"
-	default MACH_MX21
-
-config MACH_MX21
-	bool "i.MX21 support"
-	help
-	  This enables support for Freescale's MX2 based i.MX21 processor.
-
-config MACH_MX27
-	bool "i.MX27 support"
-	help
-	  This enables support for Freescale's MX2 based i.MX27 processor.
-
-endchoice
-
-endif
-
-if MACH_MX21
-
 comment "MX21 platforms:"
 
 config MACH_MX21ADS
@@ -124,15 +116,12 @@ config MACH_MX21ADS
 	  Include support for MX21ADS platform. This includes specific
 	  configurations for the board and its peripherals.
 
-endif
-
-if ARCH_MX25
-
 comment "MX25 platforms:"
 
 config MACH_MX25_3DS
 	bool "Support MX25PDK (3DS) Platform"
 	select SOC_IMX25
+	select IMX_HAVE_PLATFORM_FLEXCAN
 	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 	select IMX_HAVE_PLATFORM_IMX2_WDT
 	select IMX_HAVE_PLATFORM_IMXDI_RTC
@@ -174,10 +163,6 @@ config MACH_EUKREA_MBIMXSD25_BASEBOARD
 
 endchoice
 
-endif
-
-if MACH_MX27
-
 comment "MX27 platforms:"
 
 config MACH_MX27ADS
@@ -485,6 +470,7 @@ config MACH_QONG
 	bool "Support Dave/DENX QongEVB-LITE platform"
 	select SOC_IMX31
 	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_IMX2_WDT
 	help
 	  Include support for Dave/DENX QongEVB-LITE platform. This includes
 	  specific configurations for the board and its peripherals.

arch/arm/mach-imx/Makefile

@@ -1,16 +1,15 @@
 obj-$(CONFIG_IMX_HAVE_DMA_V1) += dma-v1.o
 
-obj-$(CONFIG_ARCH_MX1) += clock-imx1.o mm-imx1.o
-obj-$(CONFIG_MACH_MX21) += clock-imx21.o mm-imx21.o
+obj-$(CONFIG_SOC_IMX1) += clock-imx1.o mm-imx1.o
+obj-$(CONFIG_SOC_IMX21) += clock-imx21.o mm-imx21.o
 
-obj-$(CONFIG_ARCH_MX25) += clock-imx25.o mm-imx25.o ehci-imx25.o
+obj-$(CONFIG_SOC_IMX25) += clock-imx25.o mm-imx25.o ehci-imx25.o cpu-imx25.o
 
-obj-$(CONFIG_MACH_MX27) += cpu-imx27.o pm-imx27.o
-obj-$(CONFIG_MACH_MX27) += clock-imx27.o mm-imx27.o ehci-imx27.o
+obj-$(CONFIG_SOC_IMX27) += cpu-imx27.o pm-imx27.o
+obj-$(CONFIG_SOC_IMX27) += clock-imx27.o mm-imx27.o ehci-imx27.o
 
-obj-$(CONFIG_SOC_IMX31) += mm-imx31.o cpu-imx31.o clock-imx31.o iomux-imx31.o ehci-imx31.o
-obj-$(CONFIG_SOC_IMX35) += mm-imx35.o cpu-imx35.o clock-imx35.o ehci-imx35.o
-obj-$(CONFIG_CACHE_L2X0) += cache-l2x0.o
+obj-$(CONFIG_SOC_IMX31) += mm-imx3.o cpu-imx31.o clock-imx31.o iomux-imx31.o ehci-imx31.o
+obj-$(CONFIG_SOC_IMX35) += mm-imx3.o cpu-imx35.o clock-imx35.o ehci-imx35.o
 
 # Support for CMOS sensor interface
 obj-$(CONFIG_MX1_VIDEO) += mx1-camera-fiq.o mx1-camera-fiq-ksym.o

arch/arm/mach-imx/cache-l2x0.c

@@ -1,56 +0,0 @@
-/*
- * Copyright (C) 2009-2010 Pengutronix
- * Sascha Hauer <s.hauer@pengutronix.de>
- * Juergen Beisert <j.beisert@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/err.h>
-#include <linux/kernel.h>
-
-#include <asm/hardware/cache-l2x0.h>
-
-#include <mach/hardware.h>
-
-static int mxc_init_l2x0(void)
-{
-	void __iomem *l2x0_base;
-	void __iomem *clkctl_base;
-
-	if (!cpu_is_mx31() && !cpu_is_mx35())
-		return 0;
-
-/*
- * First of all, we must repair broken chip settings. There are some
- * i.MX35 CPUs in the wild, comming with bogus L2 cache settings. These
- * misconfigured CPUs will run amok immediately when the L2 cache gets enabled.
- * Workaraound is to setup the correct register setting prior enabling the
- * L2 cache. This should not hurt already working CPUs, as they are using the
- * same value.
- */
-#define L2_MEM_VAL 0x10
-
-	clkctl_base = ioremap(MX35_CLKCTL_BASE_ADDR, 4096);
-	if (clkctl_base != NULL) {
-		writel(0x00000515, clkctl_base + L2_MEM_VAL);
-		iounmap(clkctl_base);
-	} else {
-		pr_err("L2 cache: Cannot fix timing. Trying to continue without\n");
-	}
-
-	l2x0_base = ioremap(MX3x_L2CC_BASE_ADDR, 4096);
-	if (IS_ERR(l2x0_base)) {
-		printk(KERN_ERR "remapping L2 cache area failed with %ld\n",
-				PTR_ERR(l2x0_base));
-		return 0;
-	}
-
-	l2x0_init(l2x0_base, 0x00030024, 0x00000000);
-
-	return 0;
-}
-arch_initcall(mxc_init_l2x0);

arch/arm/mach-imx/clock-imx25.c

@@ -263,6 +263,7 @@ DEFINE_CLOCK(audmux_clk, 0, CCM_CGCR1, 0, NULL, NULL, NULL);
 DEFINE_CLOCK(csi_clk,    0, CCM_CGCR1,  4, get_rate_csi, NULL,  &csi_per_clk);
 DEFINE_CLOCK(can1_clk,	 0, CCM_CGCR1,  2, get_rate_ipg, NULL, NULL);
 DEFINE_CLOCK(can2_clk,	 1, CCM_CGCR1,  3, get_rate_ipg, NULL, NULL);
+DEFINE_CLOCK(iim_clk,    0, CCM_CGCR1, 26, NULL, NULL, NULL);
 
 #define _REGISTER_CLOCK(d, n, c)	\
 	{				\
@@ -310,6 +311,7 @@ static struct clk_lookup lookups[] = {
 	_REGISTER_CLOCK("flexcan.1", NULL, can2_clk)
 	/* i.mx25 has the i.mx35 type sdma */
 	_REGISTER_CLOCK("imx35-sdma", NULL, sdma_clk)
+	_REGISTER_CLOCK(NULL, "iim", iim_clk)
 };
 
 int __init mx25_clocks_init(void)
@@ -334,6 +336,10 @@ int __init mx25_clocks_init(void)
 	/* Clock source for gpt is ahb_div */
 	__raw_writel(__raw_readl(CRM_BASE+0x64) & ~(1 << 5), CRM_BASE + 0x64);
 
+	clk_enable(&iim_clk);
+	imx_print_silicon_rev("i.MX25", mx25_revision());
+	clk_disable(&iim_clk);
+
 	mxc_timer_init(&gpt_clk, MX25_IO_ADDRESS(MX25_GPT1_BASE_ADDR), 54);
 
 	return 0;

arch/arm/mach-imx/clock-imx27.c

@@ -583,7 +583,7 @@ DEFINE_CLOCK(emi_clk,      0, PCCR1, 19, NULL, NULL, &ahb_clk);
 DEFINE_CLOCK(dma_clk1,     0, PCCR1, 20, NULL, NULL, &ahb_clk);
 DEFINE_CLOCK(csi_clk1,     0, PCCR1, 21, NULL, NULL, &ahb_clk);
 DEFINE_CLOCK(brom_clk,     0, PCCR1, 22, NULL, NULL, &ahb_clk);
-DEFINE_CLOCK(ata_clk,      0, PCCR1, 23, NULL, NULL, &ahb_clk);
+DEFINE_CLOCK(pata_clk,      0, PCCR1, 23, NULL, NULL, &ahb_clk);
 DEFINE_CLOCK(wdog_clk,     0, PCCR1, 24, NULL, NULL, &ipg_clk);
 DEFINE_CLOCK(usb_clk,      0, PCCR1, 25, get_rate_usb, &usb_clk1, &spll_clk);
 DEFINE_CLOCK(uart6_clk1,   0, PCCR1, 26, NULL, NULL, &ipg_clk);
@@ -666,7 +666,7 @@ static struct clk_lookup lookups[] = {
 	_REGISTER_CLOCK("imx27-fec.0", NULL, fec_clk)
 	_REGISTER_CLOCK(NULL, "emi", emi_clk)
 	_REGISTER_CLOCK(NULL, "sahara2", sahara2_clk)
-	_REGISTER_CLOCK(NULL, "ata", ata_clk)
+	_REGISTER_CLOCK("pata_imx", NULL, pata_clk)
 	_REGISTER_CLOCK(NULL, "mstick", mstick_clk)
 	_REGISTER_CLOCK("imx2-wdt.0", NULL, wdog_clk)
 	_REGISTER_CLOCK(NULL, "gpio", gpio_clk)
@@ -751,6 +751,8 @@ int __init mx27_clocks_init(unsigned long fref)
 	clk_enable(&gpio_clk);
 	clk_enable(&emi_clk);
 	clk_enable(&iim_clk);
+	imx_print_silicon_rev("i.MX27", mx27_revision());
+	clk_disable(&iim_clk);
 
 #if defined(CONFIG_DEBUG_LL) && !defined(CONFIG_DEBUG_ICEDCC)
 	clk_enable(&uart1_clk);

arch/arm/mach-imx/clock-imx31.c

@@ -476,7 +476,7 @@ DEFINE_CLOCK(gpt_clk,     0, MXC_CCM_CGR0,  4, NULL, NULL, &perclk_clk);
 DEFINE_CLOCK(epit1_clk,   0, MXC_CCM_CGR0,  6, NULL, NULL, &perclk_clk);
 DEFINE_CLOCK(epit2_clk,   1, MXC_CCM_CGR0,  8, NULL, NULL, &perclk_clk);
 DEFINE_CLOCK(iim_clk,     0, MXC_CCM_CGR0, 10, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(ata_clk,     0, MXC_CCM_CGR0, 12, NULL, NULL, &ipg_clk);
+DEFINE_CLOCK(pata_clk,     0, MXC_CCM_CGR0, 12, NULL, NULL, &ipg_clk);
 DEFINE_CLOCK(sdma_clk1,   0, MXC_CCM_CGR0, 14, NULL, NULL, &ahb_clk);
 DEFINE_CLOCK(cspi3_clk,   2, MXC_CCM_CGR0, 16, NULL, NULL, &ipg_clk);
 DEFINE_CLOCK(rng_clk,     0, MXC_CCM_CGR0, 18, NULL, NULL, &ipg_clk);
@@ -562,7 +562,7 @@ static struct clk_lookup lookups[] = {
 	_REGISTER_CLOCK("imx-ssi.0", NULL, ssi1_clk)
 	_REGISTER_CLOCK("imx-ssi.1", NULL, ssi2_clk)
 	_REGISTER_CLOCK(NULL, "firi", firi_clk)
-	_REGISTER_CLOCK(NULL, "ata", ata_clk)
+	_REGISTER_CLOCK("pata_imx", NULL, pata_clk)
 	_REGISTER_CLOCK(NULL, "rtic", rtic_clk)
 	_REGISTER_CLOCK(NULL, "rng", rng_clk)
 	_REGISTER_CLOCK("imx31-sdma", NULL, sdma_clk1)
@@ -611,11 +611,11 @@ int __init mx31_clocks_init(unsigned long fref)
 	clk_enable(&gpt_clk);
 	clk_enable(&emi_clk);
 	clk_enable(&iim_clk);
+	mx31_revision();
+	clk_disable(&iim_clk);
 
 	clk_enable(&serial_pll_clk);
 
-	mx31_read_cpu_rev();
-
 	if (mx31_revision() >= IMX_CHIP_REVISION_2_0) {
 		reg = __raw_readl(MXC_CCM_PMCR1);
 		/* No PLL restart on DVFS switch; enable auto EMI handshake */

arch/arm/mach-imx/clock-imx35.c

@@ -354,7 +354,7 @@ static void clk_cgr_disable(struct clk *clk)
 	}
 
 DEFINE_CLOCK(asrc_clk,   0, CCM_CGR0,  0, NULL, NULL);
-DEFINE_CLOCK(ata_clk,    0, CCM_CGR0,  2, get_rate_ipg, NULL);
+DEFINE_CLOCK(pata_clk,    0, CCM_CGR0,  2, get_rate_ipg, NULL);
 /* DEFINE_CLOCK(audmux_clk, 0, CCM_CGR0,  4, NULL, NULL); */
 DEFINE_CLOCK(can1_clk,   0, CCM_CGR0,  6, get_rate_ipg, NULL);
 DEFINE_CLOCK(can2_clk,   1, CCM_CGR0,  8, get_rate_ipg, NULL);
@@ -447,7 +447,7 @@ static struct clk nfc_clk = {
 
 static struct clk_lookup lookups[] = {
 	_REGISTER_CLOCK(NULL, "asrc", asrc_clk)
-	_REGISTER_CLOCK(NULL, "ata", ata_clk)
+	_REGISTER_CLOCK("pata_imx", NULL, pata_clk)
 	_REGISTER_CLOCK("flexcan.0", NULL, can1_clk)
 	_REGISTER_CLOCK("flexcan.1", NULL, can2_clk)
 	_REGISTER_CLOCK("imx35-cspi.0", NULL, cspi1_clk)
@@ -537,7 +537,8 @@ int __init mx35_clocks_init()
 	__raw_writel(cgr3, CCM_BASE + CCM_CGR3);
 
 	clk_enable(&iim_clk);
-	mx35_read_cpu_rev();
+	imx_print_silicon_rev("i.MX35", mx35_revision());
+	clk_disable(&iim_clk);
 
 #ifdef CONFIG_MXC_USE_EPIT
 	epit_timer_init(&epit1_clk,

arch/arm/mach-imx/cpu-imx25.c

@@ -0,0 +1,41 @@
+/*
+ * MX25 CPU type detection
+ *
+ * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
+ * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#include <linux/module.h>
+#include <linux/io.h>
+#include <mach/hardware.h>
+#include <mach/iim.h>
+
+static int mx25_cpu_rev = -1;
+
+static int mx25_read_cpu_rev(void)
+{
+	u32 rev;
+
+	rev = __raw_readl(MX25_IO_ADDRESS(MX25_IIM_BASE_ADDR + MXC_IIMSREV));
+	switch (rev) {
+	case 0x00:
+		return IMX_CHIP_REVISION_1_0;
+	case 0x01:
+		return IMX_CHIP_REVISION_1_1;
+	default:
+		return IMX_CHIP_REVISION_UNKNOWN;
+	}
+}
+
+int mx25_revision(void)
+{
+	if (mx25_cpu_rev == -1)
+		mx25_cpu_rev = mx25_read_cpu_rev();
+
+	return mx25_cpu_rev;
+}
+EXPORT_SYMBOL(mx25_revision);

arch/arm/mach-imx/cpu-imx27.c

@@ -26,12 +26,12 @@
 
 #include <mach/hardware.h>
 
-static int cpu_silicon_rev = -1;
-static int cpu_partnumber;
+static int mx27_cpu_rev = -1;
+static int mx27_cpu_partnumber;
 
 #define SYS_CHIP_ID             0x00    /* The offset of CHIP ID register */
 
-static void query_silicon_parameter(void)
+static int mx27_read_cpu_rev(void)
 {
 	u32 val;
 	/*
@@ -42,20 +42,18 @@ static void query_silicon_parameter(void)
 	val = __raw_readl(MX27_IO_ADDRESS(MX27_SYSCTRL_BASE_ADDR
 				+ SYS_CHIP_ID));
 
+	mx27_cpu_partnumber = (int)((val >> 12) & 0xFFFF);
+
 	switch (val >> 28) {
 	case 0:
-		cpu_silicon_rev = IMX_CHIP_REVISION_1_0;
-		break;
+		return IMX_CHIP_REVISION_1_0;
 	case 1:
-		cpu_silicon_rev = IMX_CHIP_REVISION_2_0;
-		break;
+		return IMX_CHIP_REVISION_2_0;
 	case 2:
-		cpu_silicon_rev = IMX_CHIP_REVISION_2_1;
-		break;
+		return IMX_CHIP_REVISION_2_1;
 	default:
-		cpu_silicon_rev = IMX_CHIP_REVISION_UNKNOWN;
+		return IMX_CHIP_REVISION_UNKNOWN;
 	}
-	cpu_partnumber = (int)((val >> 12) & 0xFFFF);
 }
 
 /*
@@ -65,12 +63,12 @@ static void query_silicon_parameter(void)
  */
 int mx27_revision(void)
 {
-	if (cpu_silicon_rev == -1)
-		query_silicon_parameter();
+	if (mx27_cpu_rev == -1)
+		mx27_cpu_rev = mx27_read_cpu_rev();
 
-	if (cpu_partnumber != 0x8821)
+	if (mx27_cpu_partnumber != 0x8821)
 		return -EINVAL;
 
-	return cpu_silicon_rev;
+	return mx27_cpu_rev;
 }
 EXPORT_SYMBOL(mx27_revision);

arch/arm/mach-imx/cpu-imx31.c

@@ -13,45 +13,50 @@
 #include <linux/io.h>
 #include <mach/hardware.h>
 #include <mach/iim.h>
+#include <mach/common.h>
 
-unsigned int mx31_cpu_rev;
-EXPORT_SYMBOL(mx31_cpu_rev);
+static int mx31_cpu_rev = -1;
 
 static struct {
 	u8 srev;
 	const char *name;
-	const char *v;
 	unsigned int rev;
-} mx31_cpu_type[] __initdata = {
-	{ .srev = 0x00, .name = "i.MX31(L)", .v = "1.0",  .rev = IMX_CHIP_REVISION_1_0	},
-	{ .srev = 0x10, .name = "i.MX31",    .v = "1.1",  .rev = IMX_CHIP_REVISION_1_1	},
-	{ .srev = 0x11, .name = "i.MX31L",   .v = "1.1",  .rev = IMX_CHIP_REVISION_1_1	},
-	{ .srev = 0x12, .name = "i.MX31",    .v = "1.15", .rev = IMX_CHIP_REVISION_1_1	},
-	{ .srev = 0x13, .name = "i.MX31L",   .v = "1.15", .rev = IMX_CHIP_REVISION_1_1	},
-	{ .srev = 0x14, .name = "i.MX31",    .v = "1.2",  .rev = IMX_CHIP_REVISION_1_2	},
-	{ .srev = 0x15, .name = "i.MX31L",   .v = "1.2",  .rev = IMX_CHIP_REVISION_1_2	},
-	{ .srev = 0x28, .name = "i.MX31",    .v = "2.0",  .rev = IMX_CHIP_REVISION_2_0	},
-	{ .srev = 0x29, .name = "i.MX31L",   .v = "2.0",  .rev = IMX_CHIP_REVISION_2_0	},
+} mx31_cpu_type[] = {
+	{ .srev = 0x00, .name = "i.MX31(L)", .rev = IMX_CHIP_REVISION_1_0 },
+	{ .srev = 0x10, .name = "i.MX31",    .rev = IMX_CHIP_REVISION_1_1 },
+	{ .srev = 0x11, .name = "i.MX31L",   .rev = IMX_CHIP_REVISION_1_1 },
+	{ .srev = 0x12, .name = "i.MX31",    .rev = IMX_CHIP_REVISION_1_1 },
+	{ .srev = 0x13, .name = "i.MX31L",   .rev = IMX_CHIP_REVISION_1_1 },
+	{ .srev = 0x14, .name = "i.MX31",    .rev = IMX_CHIP_REVISION_1_2 },
+	{ .srev = 0x15, .name = "i.MX31L",   .rev = IMX_CHIP_REVISION_1_2 },
+	{ .srev = 0x28, .name = "i.MX31",    .rev = IMX_CHIP_REVISION_2_0 },
+	{ .srev = 0x29, .name = "i.MX31L",   .rev = IMX_CHIP_REVISION_2_0 },
 };
 
-void __init mx31_read_cpu_rev(void)
+static int mx31_read_cpu_rev(void)
 {
 	u32 i, srev;
 
 	/* read SREV register from IIM module */
 	srev = __raw_readl(MX31_IO_ADDRESS(MX31_IIM_BASE_ADDR + MXC_IIMSREV));
+	srev &= 0xff;
 
 	for (i = 0; i < ARRAY_SIZE(mx31_cpu_type); i++)
 		if (srev == mx31_cpu_type[i].srev) {
-			printk(KERN_INFO
-				"CPU identified as %s, silicon rev %s\n",
-				mx31_cpu_type[i].name, mx31_cpu_type[i].v);
-
-			mx31_cpu_rev = mx31_cpu_type[i].rev;
-			return;
+			imx_print_silicon_rev(mx31_cpu_type[i].name,
+						mx31_cpu_type[i].rev);
+			return mx31_cpu_type[i].rev;
 		}
 
-	mx31_cpu_rev = IMX_CHIP_REVISION_UNKNOWN;
+	imx_print_silicon_rev("i.MX31", IMX_CHIP_REVISION_UNKNOWN);
+	return IMX_CHIP_REVISION_UNKNOWN;
+}
+
+int mx31_revision(void)
+{
+	if (mx31_cpu_rev == -1)
+		mx31_cpu_rev = mx31_read_cpu_rev();
 
-	printk(KERN_WARNING "Unknown CPU identifier. srev = %02x\n", srev);
+	return mx31_cpu_rev;
 }
+EXPORT_SYMBOL(mx31_revision);

arch/arm/mach-imx/cpu-imx35.c

@@ -13,32 +13,30 @@
 #include <mach/hardware.h>
 #include <mach/iim.h>
 
-unsigned int mx35_cpu_rev;
-EXPORT_SYMBOL(mx35_cpu_rev);
+static int mx35_cpu_rev = -1;
 
-void __init mx35_read_cpu_rev(void)
+static int mx35_read_cpu_rev(void)
 {
 	u32 rev;
-	char *srev;
 
 	rev = __raw_readl(MX35_IO_ADDRESS(MX35_IIM_BASE_ADDR + MXC_IIMSREV));
 	switch (rev) {
 	case 0x00:
-		mx35_cpu_rev = IMX_CHIP_REVISION_1_0;
-		srev = "1.0";
-		break;
+		return IMX_CHIP_REVISION_1_0;
 	case 0x10:
-		mx35_cpu_rev = IMX_CHIP_REVISION_2_0;
-		srev = "2.0";
-		break;
+		return IMX_CHIP_REVISION_2_0;
 	case 0x11:
-		mx35_cpu_rev = IMX_CHIP_REVISION_2_1;
-		srev = "2.1";
-		break;
+		return IMX_CHIP_REVISION_2_1;
 	default:
-		mx35_cpu_rev = IMX_CHIP_REVISION_UNKNOWN;
-		srev = "unknown";
+		return IMX_CHIP_REVISION_UNKNOWN;
 	}
+}
+
+int mx35_revision(void)
+{
+	if (mx35_cpu_rev == -1)
+		mx35_cpu_rev = mx35_read_cpu_rev();
 
-	printk(KERN_INFO "CPU identified as i.MX35, silicon rev %s\n", srev);
+	return mx35_cpu_rev;
 }
+EXPORT_SYMBOL(mx35_revision);

arch/arm/mach-imx/devices-imx27.h

@@ -76,3 +76,7 @@ extern const struct imx_spi_imx_data imx27_cspi_data[];
 #define imx27_add_spi_imx0(pdata)	imx27_add_cspi(0, pdata)
 #define imx27_add_spi_imx1(pdata)	imx27_add_cspi(1, pdata)
 #define imx27_add_spi_imx2(pdata)	imx27_add_cspi(2, pdata)
+
+extern const struct imx_pata_imx_data imx27_pata_imx_data;
+#define imx27_add_pata_imx() \
+	imx_add_pata_imx(&imx27_pata_imx_data)

arch/arm/mach-imx/devices-imx31.h

@@ -78,3 +78,7 @@ extern const struct imx_spi_imx_data imx31_cspi_data[];
 #define imx31_add_spi_imx0(pdata)	imx31_add_cspi(0, pdata)
 #define imx31_add_spi_imx1(pdata)	imx31_add_cspi(1, pdata)
 #define imx31_add_spi_imx2(pdata)	imx31_add_cspi(2, pdata)
+
+extern const struct imx_pata_imx_data imx31_pata_imx_data;
+#define imx31_add_pata_imx() \
+	imx_add_pata_imx(&imx31_pata_imx_data)

arch/arm/mach-imx/devices-imx35.h

@@ -81,3 +81,7 @@ extern const struct imx_spi_imx_data imx35_cspi_data[];
 	imx_add_spi_imx(&imx35_cspi_data[id], pdata)
 #define imx35_add_spi_imx0(pdata)	imx35_add_cspi(0, pdata)
 #define imx35_add_spi_imx1(pdata)	imx35_add_cspi(1, pdata)
+
+extern const struct imx_pata_imx_data imx35_pata_imx_data;
+#define imx35_add_pata_imx() \
+	imx_add_pata_imx(&imx35_pata_imx_data)

arch/arm/mach-imx/mach-apf9328.c

@@ -136,6 +136,7 @@ MACHINE_START(APF9328, "Armadeus APF9328")
 	.map_io       = mx1_map_io,
 	.init_early   = imx1_init_early,
 	.init_irq     = mx1_init_irq,
+	.handle_irq   = imx1_handle_irq,
 	.timer        = &apf9328_timer,
 	.init_machine = apf9328_init,
 MACHINE_END

arch/arm/mach-imx/mach-armadillo5x0.c

@@ -314,25 +314,19 @@ static struct mtd_partition armadillo5x0_nor_flash_partitions[] = {
 	},
 };
 
-static struct physmap_flash_data armadillo5x0_nor_flash_pdata = {
+static const struct physmap_flash_data
+		armadillo5x0_nor_flash_pdata __initconst = {
 	.width		= 2,
 	.parts		= armadillo5x0_nor_flash_partitions,
 	.nr_parts	= ARRAY_SIZE(armadillo5x0_nor_flash_partitions),
 };
 
-static struct resource armadillo5x0_nor_flash_resource = {
+static const struct resource armadillo5x0_nor_flash_resource __initconst = {
 	.flags		= IORESOURCE_MEM,
 	.start		= MX31_CS0_BASE_ADDR,
 	.end		= MX31_CS0_BASE_ADDR + SZ_64M - 1,
 };
 
-static struct platform_device armadillo5x0_nor_flash = {
-	.name			= "physmap-flash",
-	.id			= -1,
-	.num_resources		= 1,
-	.resource		= &armadillo5x0_nor_flash_resource,
-};
-
 /*
  * FB support
  */
@@ -514,8 +508,10 @@ static void __init armadillo5x0_init(void)
 	imx31_add_mx3_sdc_fb(&mx3fb_pdata);
 
 	/* Register NOR Flash */
-	mxc_register_device(&armadillo5x0_nor_flash,
-			    &armadillo5x0_nor_flash_pdata);
+	platform_device_register_resndata(NULL, "physmap-flash", -1,
+			&armadillo5x0_nor_flash_resource, 1,
+			&armadillo5x0_nor_flash_pdata,
+			sizeof(armadillo5x0_nor_flash_pdata));
 
 	/* Register NAND Flash */
 	imx31_add_mxc_nand(&armadillo5x0_nand_board_info);
@@ -562,6 +558,7 @@ MACHINE_START(ARMADILLO5X0, "Armadillo-500")
 	.map_io = mx31_map_io,
 	.init_early = imx31_init_early,
 	.init_irq = mx31_init_irq,
+	.handle_irq = imx31_handle_irq,
 	.timer = &armadillo5x0_timer,
 	.init_machine = armadillo5x0_init,
 MACHINE_END

arch/arm/mach-imx/mach-bug.c

@@ -62,6 +62,7 @@ MACHINE_START(BUG, "BugLabs BUGBase")
 	.map_io = mx31_map_io,
 	.init_early = imx31_init_early,
 	.init_irq = mx31_init_irq,
+	.handle_irq = imx31_handle_irq,
 	.timer = &bug_timer,
 	.init_machine = bug_board_init,
 MACHINE_END

arch/arm/mach-imx/mach-cpuimx27.c

@@ -315,6 +315,7 @@ MACHINE_START(EUKREA_CPUIMX27, "EUKREA CPUIMX27")
 	.map_io = mx27_map_io,
 	.init_early = imx27_init_early,
 	.init_irq = mx27_init_irq,
+	.handle_irq = imx27_handle_irq,
 	.timer = &eukrea_cpuimx27_timer,
 	.init_machine = eukrea_cpuimx27_init,
 MACHINE_END

arch/arm/mach-imx/mach-cpuimx35.c

@@ -66,7 +66,7 @@ static struct i2c_board_info eukrea_cpuimx35_i2c_devices[] = {
 		I2C_BOARD_INFO("tsc2007", 0x48),
 		.type		= "tsc2007",
 		.platform_data	= &tsc2007_info,
-		.irq		= gpio_to_irq(TSC2007_IRQGPIO),
+		.irq		= IMX_GPIO_TO_IRQ(TSC2007_IRQGPIO),
 	},
 };
 
@@ -198,6 +198,7 @@ MACHINE_START(EUKREA_CPUIMX35SD, "Eukrea CPUIMX35")
 	.map_io = mx35_map_io,
 	.init_early = imx35_init_early,
 	.init_irq = mx35_init_irq,
+	.handle_irq = imx35_handle_irq,
 	.timer = &eukrea_cpuimx35_timer,
 	.init_machine = eukrea_cpuimx35_init,
 MACHINE_END

arch/arm/mach-imx/mach-eukrea_cpuimx25.c

@@ -167,6 +167,7 @@ MACHINE_START(EUKREA_CPUIMX25SD, "Eukrea CPUIMX25")
 	.map_io = mx25_map_io,
 	.init_early = imx25_init_early,
 	.init_irq = mx25_init_irq,
+	.handle_irq = imx25_handle_irq,
 	.timer = &eukrea_cpuimx25_timer,
 	.init_machine = eukrea_cpuimx25_init,
 MACHINE_END

arch/arm/mach-imx/mach-imx27_visstrim_m10.c

@@ -279,6 +279,7 @@ MACHINE_START(IMX27_VISSTRIM_M10, "Vista Silicon Visstrim_M10")
 	.map_io = mx27_map_io,
 	.init_early = imx27_init_early,
 	.init_irq = mx27_init_irq,
+	.handle_irq = imx27_handle_irq,
 	.timer = &visstrim_m10_timer,
 	.init_machine = visstrim_m10_board_init,
 MACHINE_END

arch/arm/mach-imx/mach-imx27ipcam.c

@@ -75,6 +75,7 @@ MACHINE_START(IMX27IPCAM, "Freescale IMX27IPCAM")
 	.map_io = mx27_map_io,
 	.init_early = imx27_init_early,
 	.init_irq = mx27_init_irq,
+	.handle_irq = imx27_handle_irq,
 	.timer = &mx27ipcam_timer,
 	.init_machine = mx27ipcam_init,
 MACHINE_END

arch/arm/mach-imx/mach-imx27lite.c

@@ -81,6 +81,7 @@ MACHINE_START(IMX27LITE, "LogicPD i.MX27LITE")
 	.map_io = mx27_map_io,
 	.init_early = imx27_init_early,
 	.init_irq = mx27_init_irq,
+	.handle_irq = imx27_handle_irq,
 	.timer = &mx27lite_timer,
 	.init_machine = mx27lite_init,
 MACHINE_END

arch/arm/mach-imx/mach-kzm_arm11_01.c

@@ -275,6 +275,7 @@ MACHINE_START(KZM_ARM11_01, "Kyoto Microcomputer Co., Ltd. KZM-ARM11-01")
 	.map_io = kzm_map_io,
 	.init_early = imx31_init_early,
 	.init_irq = mx31_init_irq,
+	.handle_irq = imx31_handle_irq,
 	.timer = &kzm_timer,
 	.init_machine = kzm_board_init,
 MACHINE_END

arch/arm/mach-imx/mach-mx1ads.c

@@ -68,23 +68,16 @@ static const struct imxuart_platform_data uart1_pdata __initconst = {
  * Physmap flash
  */
 
-static struct physmap_flash_data mx1ads_flash_data = {
+static const struct physmap_flash_data mx1ads_flash_data __initconst = {
 	.width		= 4,		/* bankwidth in bytes */
 };
 
-static struct resource flash_resource = {
+static const struct resource flash_resource __initconst = {
 	.start	= MX1_CS0_PHYS,
 	.end	= MX1_CS0_PHYS + SZ_32M - 1,
 	.flags	= IORESOURCE_MEM,
 };
 
-static struct platform_device flash_device = {
-	.name	= "physmap-flash",
-	.id	= 0,
-	.resource = &flash_resource,
-	.num_resources = 1,
-};
-
 /*
  * I2C
  */
@@ -125,7 +118,9 @@ static void __init mx1ads_init(void)
 	imx1_add_imx_uart1(&uart1_pdata);
 
 	/* Physmap flash */
-	mxc_register_device(&flash_device, &mx1ads_flash_data);
+	platform_device_register_resndata(NULL, "physmap-flash", 0,
+			&flash_resource, 1,
+			&mx1ads_flash_data, sizeof(mx1ads_flash_data));
 
 	/* I2C */
 	i2c_register_board_info(0, mx1ads_i2c_devices,
@@ -149,6 +144,7 @@ MACHINE_START(MX1ADS, "Freescale MX1ADS")
 	.map_io = mx1_map_io,
 	.init_early = imx1_init_early,
 	.init_irq = mx1_init_irq,
+	.handle_irq = imx1_handle_irq,
 	.timer = &mx1ads_timer,
 	.init_machine = mx1ads_init,
 MACHINE_END
@@ -158,6 +154,7 @@ MACHINE_START(MXLADS, "Freescale MXLADS")
 	.map_io = mx1_map_io,
 	.init_early = imx1_init_early,
 	.init_irq = mx1_init_irq,
+	.handle_irq = imx1_handle_irq,
 	.timer = &mx1ads_timer,
 	.init_machine = mx1ads_init,
 MACHINE_END

arch/arm/mach-imx/mach-mx21ads.c

@@ -309,6 +309,7 @@ MACHINE_START(MX21ADS, "Freescale i.MX21ADS")
 	.map_io = mx21ads_map_io,
 	.init_early = imx21_init_early,
 	.init_irq = mx21_init_irq,
+	.handle_irq = imx21_handle_irq,
 	.timer = &mx21ads_timer,
 	.init_machine = mx21ads_board_init,
 MACHINE_END

arch/arm/mach-imx/mach-mx25_3ds.c

@@ -43,6 +43,8 @@
 
 #include "devices-imx25.h"
 
+#define MX25PDK_CAN_PWDN	IMX_GPIO_NR(4, 6)
+
 static const struct imxuart_platform_data uart_pdata __initconst = {
 	.flags = IMXUART_HAVE_RTSCTS,
 };
@@ -108,6 +110,11 @@ static iomux_v3_cfg_t mx25pdk_pads[] = {
 	/* I2C1 */
 	MX25_PAD_I2C1_CLK__I2C1_CLK,
 	MX25_PAD_I2C1_DAT__I2C1_DAT,
+
+	/* CAN1 */
+	MX25_PAD_GPIO_A__CAN1_TX,
+	MX25_PAD_GPIO_B__CAN1_RX,
+	MX25_PAD_D14__GPIO_4_6,	/* CAN_PWDN */
 };
 
 static const struct fec_platform_data mx25_fec_pdata __initconst = {
@@ -240,6 +247,9 @@ static void __init mx25pdk_init(void)
 
 	imx25_add_sdhci_esdhc_imx(0, &mx25pdk_esdhc_pdata);
 	imx25_add_imx_i2c0(&mx25_3ds_i2c0_data);
+
+	gpio_request_one(MX25PDK_CAN_PWDN, GPIOF_OUT_INIT_LOW, "can-pwdn");
+	imx25_add_flexcan0(NULL);
 }
 
 static void __init mx25pdk_timer_init(void)
@@ -257,6 +267,7 @@ MACHINE_START(MX25_3DS, "Freescale MX25PDK (3DS)")
 	.map_io = mx25_map_io,
 	.init_early = imx25_init_early,
 	.init_irq = mx25_init_irq,
+	.handle_irq = imx25_handle_irq,
 	.timer = &mx25pdk_timer,
 	.init_machine = mx25pdk_init,
 MACHINE_END

arch/arm/mach-imx/mach-mx27_3ds.c

@@ -359,7 +359,7 @@ static struct spi_board_info mx27_3ds_spi_devs[] __initdata = {
 		.bus_num	= 1,
 		.chip_select	= 0, /* SS0 */
 		.platform_data	= &mc13783_pdata,
-		.irq = gpio_to_irq(PMIC_INT),
+		.irq = IMX_GPIO_TO_IRQ(PMIC_INT),
 		.mode = SPI_CS_HIGH,
 	}, {
 		.modalias	= "l4f00242t03",
@@ -425,6 +425,7 @@ MACHINE_START(MX27_3DS, "Freescale MX27PDK")
 	.map_io = mx27_map_io,
 	.init_early = imx27_init_early,
 	.init_irq = mx27_init_irq,
+	.handle_irq = imx27_handle_irq,
 	.timer = &mx27pdk_timer,
 	.init_machine = mx27pdk_init,
 MACHINE_END

arch/arm/mach-imx/mach-mx27ads.c

@@ -349,6 +349,7 @@ MACHINE_START(MX27ADS, "Freescale i.MX27ADS")
 	.map_io = mx27ads_map_io,
 	.init_early = imx27_init_early,
 	.init_irq = mx27_init_irq,
+	.handle_irq = imx27_handle_irq,
 	.timer = &mx27ads_timer,
 	.init_machine = mx27ads_board_init,
 MACHINE_END

arch/arm/mach-imx/mach-mx31_3ds.c

@@ -768,6 +768,7 @@ MACHINE_START(MX31_3DS, "Freescale MX31PDK (3DS)")
 	.map_io = mx31_map_io,
 	.init_early = imx31_init_early,
 	.init_irq = mx31_init_irq,
+	.handle_irq = imx31_handle_irq,
 	.timer = &mx31_3ds_timer,
 	.init_machine = mx31_3ds_init,
 	.reserve = mx31_3ds_reserve,

arch/arm/mach-imx/mach-mx31ads.c

@@ -539,6 +539,7 @@ MACHINE_START(MX31ADS, "Freescale MX31ADS")
 	.map_io = mx31ads_map_io,
 	.init_early = imx31_init_early,
 	.init_irq = mx31ads_init_irq,
+	.handle_irq = imx31_handle_irq,
 	.timer = &mx31ads_timer,
 	.init_machine = mx31ads_init,
 MACHINE_END

arch/arm/mach-imx/mach-mx31lilly.c

@@ -299,6 +299,7 @@ MACHINE_START(LILLY1131, "INCO startec LILLY-1131")
 	.map_io = mx31_map_io,
 	.init_early = imx31_init_early,
 	.init_irq = mx31_init_irq,
+	.handle_irq = imx31_handle_irq,
 	.timer = &mx31lilly_timer,
 	.init_machine = mx31lilly_board_init,
 MACHINE_END

arch/arm/mach-imx/mach-mx31lite.c

@@ -284,6 +284,7 @@ MACHINE_START(MX31LITE, "LogicPD i.MX31 SOM")
 	.map_io = mx31lite_map_io,
 	.init_early = imx31_init_early,
 	.init_irq = mx31_init_irq,
+	.handle_irq = imx31_handle_irq,
 	.timer = &mx31lite_timer,
 	.init_machine = mx31lite_init,
 MACHINE_END

arch/arm/mach-imx/mach-mx31moboard.c

@@ -28,6 +28,9 @@
 #include <linux/spi/spi.h>
 #include <linux/types.h>
 #include <linux/memblock.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/err.h>
 
 #include <linux/usb/otg.h>
 #include <linux/usb/ulpi.h>
@@ -490,6 +493,18 @@ err:
 
 }
 
+static void mx31moboard_poweroff(void)
+{
+	struct clk *clk = clk_get_sys("imx2-wdt.0", NULL);
+
+	if (!IS_ERR(clk))
+		clk_enable(clk);
+
+	mxc_iomux_mode(MX31_PIN_WATCHDOG_RST__WATCHDOG_RST);
+
+	__raw_writew(1 << 6 | 1 << 2, MX31_IO_ADDRESS(MX31_WDOG_BASE_ADDR));
+}
+
 static int mx31moboard_baseboard;
 core_param(mx31moboard_baseboard, mx31moboard_baseboard, int, 0444);
 
@@ -528,6 +543,8 @@ static void __init mx31moboard_init(void)
 
 	moboard_usbh2_init();
 
+	pm_power_off = mx31moboard_poweroff;
+
 	switch (mx31moboard_baseboard) {
 	case MX31NOBOARD:
 		break;
@@ -572,6 +589,7 @@ MACHINE_START(MX31MOBOARD, "EPFL Mobots mx31moboard")
 	.map_io = mx31_map_io,
 	.init_early = imx31_init_early,
 	.init_irq = mx31_init_irq,
+	.handle_irq = imx31_handle_irq,
 	.timer = &mx31moboard_timer,
 	.init_machine = mx31moboard_init,
 MACHINE_END

arch/arm/mach-imx/mach-mx35_3ds.c

@@ -221,6 +221,7 @@ MACHINE_START(MX35_3DS, "Freescale MX35PDK")
 	.map_io = mx35_map_io,
 	.init_early = imx35_init_early,
 	.init_irq = mx35_init_irq,
+	.handle_irq = imx35_handle_irq,
 	.timer = &mx35pdk_timer,
 	.init_machine = mx35_3ds_init,
 MACHINE_END

arch/arm/mach-imx/mach-mxt_td60.c

@@ -271,6 +271,7 @@ MACHINE_START(MXT_TD60, "Maxtrack i-MXT TD60")
 	.map_io = mx27_map_io,
 	.init_early = imx27_init_early,
 	.init_irq = mx27_init_irq,
+	.handle_irq = imx27_handle_irq,
 	.timer = &mxt_td60_timer,
 	.init_machine = mxt_td60_board_init,
 MACHINE_END

arch/arm/mach-imx/mach-pca100.c

@@ -439,6 +439,7 @@ MACHINE_START(PCA100, "phyCARD-i.MX27")
 	.map_io = mx27_map_io,
 	.init_early = imx27_init_early,
 	.init_irq = mx27_init_irq,
+	.handle_irq = imx27_handle_irq,
 	.init_machine = pca100_init,
 	.timer = &pca100_timer,
 MACHINE_END

arch/arm/mach-imx/mach-pcm037.c

@@ -693,6 +693,7 @@ MACHINE_START(PCM037, "Phytec Phycore pcm037")
 	.map_io = mx31_map_io,
 	.init_early = imx31_init_early,
 	.init_irq = mx31_init_irq,
+	.handle_irq = imx31_handle_irq,
 	.timer = &pcm037_timer,
 	.init_machine = pcm037_init,
 MACHINE_END

arch/arm/mach-imx/mach-pcm038.c

@@ -353,6 +353,7 @@ MACHINE_START(PCM038, "phyCORE-i.MX27")
 	.map_io = mx27_map_io,
 	.init_early = imx27_init_early,
 	.init_irq = mx27_init_irq,
+	.handle_irq = imx27_handle_irq,
 	.timer = &pcm038_timer,
 	.init_machine = pcm038_init,
 MACHINE_END

arch/arm/mach-imx/mach-pcm043.c

@@ -422,6 +422,7 @@ MACHINE_START(PCM043, "Phytec Phycore pcm043")
 	.map_io = mx35_map_io,
 	.init_early = imx35_init_early,
 	.init_irq = mx35_init_irq,
+	.handle_irq = imx35_handle_irq,
 	.timer = &pcm043_timer,
 	.init_machine = pcm043_init,
 MACHINE_END

arch/arm/mach-imx/mach-qong.c

@@ -249,6 +249,7 @@ static void __init qong_init(void)
 	mxc_init_imx_uart();
 	qong_init_nor_mtd();
 	qong_init_fpga();
+	imx31_add_imx2_wdt(NULL);
 }
 
 static void __init qong_timer_init(void)
@@ -266,6 +267,7 @@ MACHINE_START(QONG, "Dave/DENX QongEVB-LITE")
 	.map_io = mx31_map_io,
 	.init_early = imx31_init_early,
 	.init_irq = mx31_init_irq,
+	.handle_irq = imx31_handle_irq,
 	.timer = &qong_timer,
 	.init_machine = qong_init,
 MACHINE_END

arch/arm/mach-imx/mach-scb9328.c

@@ -141,6 +141,7 @@ MACHINE_START(SCB9328, "Synertronixx scb9328")
 	.map_io = mx1_map_io,
 	.init_early = imx1_init_early,
 	.init_irq = mx1_init_irq,
+	.handle_irq = imx1_handle_irq,
 	.timer = &scb9328_timer,
 	.init_machine = scb9328_init,
 MACHINE_END

arch/arm/mach-imx/mach-vpr200.c

@@ -162,7 +162,7 @@ static struct i2c_board_info vpr200_i2c_devices[] = {
 	}, {
 		I2C_BOARD_INFO("mc13892", 0x08),
 		.platform_data = &vpr200_pmic,
-		.irq = gpio_to_irq(GPIO_PMIC_INT),
+		.irq = IMX_GPIO_TO_IRQ(GPIO_PMIC_INT),
 	}
 };
 
@@ -319,6 +319,7 @@ MACHINE_START(VPR200, "VPR200")
 	.map_io = mx35_map_io,
 	.init_early = imx35_init_early,
 	.init_irq = mx35_init_irq,
+	.handle_irq = imx35_handle_irq,
 	.timer = &vpr200_timer,
 	.init_machine = vpr200_board_init,
 MACHINE_END

arch/arm/mach-imx/mm-imx3.c

@@ -0,0 +1,256 @@
+/*
+ *  Copyright (C) 1999,2000 Arm Limited
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd
+ *  Copyright (C) 2002 Shane Nay (shane@minirl.com)
+ *  Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ *    - add MX31 specific definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <linux/err.h>
+
+#include <asm/pgtable.h>
+#include <asm/hardware/cache-l2x0.h>
+#include <asm/mach/map.h>
+
+#include <mach/common.h>
+#include <mach/devices-common.h>
+#include <mach/hardware.h>
+#include <mach/iomux-v3.h>
+#include <mach/irqs.h>
+
+static void imx3_idle(void)
+{
+	unsigned long reg = 0;
+	__asm__ __volatile__(
+		/* disable I and D cache */
+		"mrc p15, 0, %0, c1, c0, 0\n"
+		"bic %0, %0, #0x00001000\n"
+		"bic %0, %0, #0x00000004\n"
+		"mcr p15, 0, %0, c1, c0, 0\n"
+		/* invalidate I cache */
+		"mov %0, #0\n"
+		"mcr p15, 0, %0, c7, c5, 0\n"
+		/* clear and invalidate D cache */
+		"mov %0, #0\n"
+		"mcr p15, 0, %0, c7, c14, 0\n"
+		/* WFI */
+		"mov %0, #0\n"
+		"mcr p15, 0, %0, c7, c0, 4\n"
+		"nop\n" "nop\n" "nop\n" "nop\n"
+		"nop\n" "nop\n" "nop\n"
+		/* enable I and D cache */
+		"mrc p15, 0, %0, c1, c0, 0\n"
+		"orr %0, %0, #0x00001000\n"
+		"orr %0, %0, #0x00000004\n"
+		"mcr p15, 0, %0, c1, c0, 0\n"
+		: "=r" (reg));
+}
+
+static void __iomem *imx3_ioremap(unsigned long phys_addr, size_t size,
+				  unsigned int mtype)
+{
+	if (mtype == MT_DEVICE) {
+		/*
+		 * Access all peripherals below 0x80000000 as nonshared device
+		 * on mx3, but leave l2cc alone.  Otherwise cache corruptions
+		 * can occur.
+		 */
+		if (phys_addr < 0x80000000 &&
+				!addr_in_module(phys_addr, MX3x_L2CC))
+			mtype = MT_DEVICE_NONSHARED;
+	}
+
+	return __arm_ioremap(phys_addr, size, mtype);
+}
+
+void imx3_init_l2x0(void)
+{
+	void __iomem *l2x0_base;
+	void __iomem *clkctl_base;
+
+/*
+ * First of all, we must repair broken chip settings. There are some
+ * i.MX35 CPUs in the wild, comming with bogus L2 cache settings. These
+ * misconfigured CPUs will run amok immediately when the L2 cache gets enabled.
+ * Workaraound is to setup the correct register setting prior enabling the
+ * L2 cache. This should not hurt already working CPUs, as they are using the
+ * same value.
+ */
+#define L2_MEM_VAL 0x10
+
+	clkctl_base = ioremap(MX35_CLKCTL_BASE_ADDR, 4096);
+	if (clkctl_base != NULL) {
+		writel(0x00000515, clkctl_base + L2_MEM_VAL);
+		iounmap(clkctl_base);
+	} else {
+		pr_err("L2 cache: Cannot fix timing. Trying to continue without\n");
+	}
+
+	l2x0_base = ioremap(MX3x_L2CC_BASE_ADDR, 4096);
+	if (IS_ERR(l2x0_base)) {
+		printk(KERN_ERR "remapping L2 cache area failed with %ld\n",
+				PTR_ERR(l2x0_base));
+		return;
+	}
+
+	l2x0_init(l2x0_base, 0x00030024, 0x00000000);
+}
+
+static struct map_desc mx31_io_desc[] __initdata = {
+	imx_map_entry(MX31, X_MEMC, MT_DEVICE),
+	imx_map_entry(MX31, AVIC, MT_DEVICE_NONSHARED),
+	imx_map_entry(MX31, AIPS1, MT_DEVICE_NONSHARED),
+	imx_map_entry(MX31, AIPS2, MT_DEVICE_NONSHARED),
+	imx_map_entry(MX31, SPBA0, MT_DEVICE_NONSHARED),
+};
+
+/*
+ * This function initializes the memory map. It is called during the
+ * system startup to create static physical to virtual memory mappings
+ * for the IO modules.
+ */
+void __init mx31_map_io(void)
+{
+	iotable_init(mx31_io_desc, ARRAY_SIZE(mx31_io_desc));
+}
+
+static struct map_desc mx35_io_desc[] __initdata = {
+	imx_map_entry(MX35, X_MEMC, MT_DEVICE),
+	imx_map_entry(MX35, AVIC, MT_DEVICE_NONSHARED),
+	imx_map_entry(MX35, AIPS1, MT_DEVICE_NONSHARED),
+	imx_map_entry(MX35, AIPS2, MT_DEVICE_NONSHARED),
+	imx_map_entry(MX35, SPBA0, MT_DEVICE_NONSHARED),
+};
+
+void __init mx35_map_io(void)
+{
+	iotable_init(mx35_io_desc, ARRAY_SIZE(mx35_io_desc));
+}
+
+void __init imx31_init_early(void)
+{
+	mxc_set_cpu_type(MXC_CPU_MX31);
+	mxc_arch_reset_init(MX31_IO_ADDRESS(MX31_WDOG_BASE_ADDR));
+	imx_idle = imx3_idle;
+	imx_ioremap = imx3_ioremap;
+}
+
+void __init imx35_init_early(void)
+{
+	mxc_set_cpu_type(MXC_CPU_MX35);
+	mxc_iomux_v3_init(MX35_IO_ADDRESS(MX35_IOMUXC_BASE_ADDR));
+	mxc_arch_reset_init(MX35_IO_ADDRESS(MX35_WDOG_BASE_ADDR));
+	imx_idle = imx3_idle;
+	imx_ioremap = imx3_ioremap;
+}
+
+void __init mx31_init_irq(void)
+{
+	mxc_init_irq(MX31_IO_ADDRESS(MX31_AVIC_BASE_ADDR));
+}
+
+void __init mx35_init_irq(void)
+{
+	mxc_init_irq(MX35_IO_ADDRESS(MX35_AVIC_BASE_ADDR));
+}
+
+static struct sdma_script_start_addrs imx31_to1_sdma_script __initdata = {
+	.per_2_per_addr = 1677,
+};
+
+static struct sdma_script_start_addrs imx31_to2_sdma_script __initdata = {
+	.ap_2_ap_addr = 423,
+	.ap_2_bp_addr = 829,
+	.bp_2_ap_addr = 1029,
+};
+
+static struct sdma_platform_data imx31_sdma_pdata __initdata = {
+	.fw_name = "sdma-imx31-to2.bin",
+	.script_addrs = &imx31_to2_sdma_script,
+};
+
+void __init imx31_soc_init(void)
+{
+	int to_version = mx31_revision() >> 4;
+
+	imx3_init_l2x0();
+
+	mxc_register_gpio("imx31-gpio", 0, MX31_GPIO1_BASE_ADDR, SZ_16K, MX31_INT_GPIO1, 0);
+	mxc_register_gpio("imx31-gpio", 1, MX31_GPIO2_BASE_ADDR, SZ_16K, MX31_INT_GPIO2, 0);
+	mxc_register_gpio("imx31-gpio", 2, MX31_GPIO3_BASE_ADDR, SZ_16K, MX31_INT_GPIO3, 0);
+
+	if (to_version == 1) {
+		strncpy(imx31_sdma_pdata.fw_name, "sdma-imx31-to1.bin",
+			strlen(imx31_sdma_pdata.fw_name));
+		imx31_sdma_pdata.script_addrs = &imx31_to1_sdma_script;
+	}
+
+	imx_add_imx_sdma("imx31-sdma", MX31_SDMA_BASE_ADDR, MX31_INT_SDMA, &imx31_sdma_pdata);
+}
+
+static struct sdma_script_start_addrs imx35_to1_sdma_script __initdata = {
+	.ap_2_ap_addr = 642,
+	.uart_2_mcu_addr = 817,
+	.mcu_2_app_addr = 747,
+	.uartsh_2_mcu_addr = 1183,
+	.per_2_shp_addr = 1033,
+	.mcu_2_shp_addr = 961,
+	.ata_2_mcu_addr = 1333,
+	.mcu_2_ata_addr = 1252,
+	.app_2_mcu_addr = 683,
+	.shp_2_per_addr = 1111,
+	.shp_2_mcu_addr = 892,
+};
+
+static struct sdma_script_start_addrs imx35_to2_sdma_script __initdata = {
+	.ap_2_ap_addr = 729,
+	.uart_2_mcu_addr = 904,
+	.per_2_app_addr = 1597,
+	.mcu_2_app_addr = 834,
+	.uartsh_2_mcu_addr = 1270,
+	.per_2_shp_addr = 1120,
+	.mcu_2_shp_addr = 1048,
+	.ata_2_mcu_addr = 1429,
+	.mcu_2_ata_addr = 1339,
+	.app_2_per_addr = 1531,
+	.app_2_mcu_addr = 770,
+	.shp_2_per_addr = 1198,
+	.shp_2_mcu_addr = 979,
+};
+
+static struct sdma_platform_data imx35_sdma_pdata __initdata = {
+	.fw_name = "sdma-imx35-to2.bin",
+	.script_addrs = &imx35_to2_sdma_script,
+};
+
+void __init imx35_soc_init(void)
+{
+	int to_version = mx35_revision() >> 4;
+
+	imx3_init_l2x0();
+
+	/* i.mx35 has the i.mx31 type gpio */
+	mxc_register_gpio("imx31-gpio", 0, MX35_GPIO1_BASE_ADDR, SZ_16K, MX35_INT_GPIO1, 0);
+	mxc_register_gpio("imx31-gpio", 1, MX35_GPIO2_BASE_ADDR, SZ_16K, MX35_INT_GPIO2, 0);
+	mxc_register_gpio("imx31-gpio", 2, MX35_GPIO3_BASE_ADDR, SZ_16K, MX35_INT_GPIO3, 0);
+
+	if (to_version == 1) {
+		strncpy(imx35_sdma_pdata.fw_name, "sdma-imx35-to1.bin",
+			strlen(imx35_sdma_pdata.fw_name));
+		imx35_sdma_pdata.script_addrs = &imx35_to1_sdma_script;
+	}
+
+	imx_add_imx_sdma("imx35-sdma", MX35_SDMA_BASE_ADDR, MX35_INT_SDMA, &imx35_sdma_pdata);
+}

arch/arm/mach-imx/mm-imx31.c

@@ -1,91 +0,0 @@
-/*
- *  Copyright (C) 1999,2000 Arm Limited
- *  Copyright (C) 2000 Deep Blue Solutions Ltd
- *  Copyright (C) 2002 Shane Nay (shane@minirl.com)
- *  Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- *    - add MX31 specific definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/err.h>
-
-#include <asm/pgtable.h>
-#include <asm/mach/map.h>
-
-#include <mach/common.h>
-#include <mach/devices-common.h>
-#include <mach/hardware.h>
-#include <mach/iomux-v3.h>
-#include <mach/irqs.h>
-
-static struct map_desc mx31_io_desc[] __initdata = {
-	imx_map_entry(MX31, X_MEMC, MT_DEVICE),
-	imx_map_entry(MX31, AVIC, MT_DEVICE_NONSHARED),
-	imx_map_entry(MX31, AIPS1, MT_DEVICE_NONSHARED),
-	imx_map_entry(MX31, AIPS2, MT_DEVICE_NONSHARED),
-	imx_map_entry(MX31, SPBA0, MT_DEVICE_NONSHARED),
-};
-
-/*
- * This function initializes the memory map. It is called during the
- * system startup to create static physical to virtual memory mappings
- * for the IO modules.
- */
-void __init mx31_map_io(void)
-{
-	iotable_init(mx31_io_desc, ARRAY_SIZE(mx31_io_desc));
-}
-
-void __init imx31_init_early(void)
-{
-	mxc_set_cpu_type(MXC_CPU_MX31);
-	mxc_arch_reset_init(MX31_IO_ADDRESS(MX31_WDOG_BASE_ADDR));
-}
-
-void __init mx31_init_irq(void)
-{
-	mxc_init_irq(MX31_IO_ADDRESS(MX31_AVIC_BASE_ADDR));
-}
-
-static struct sdma_script_start_addrs imx31_to1_sdma_script __initdata = {
-	.per_2_per_addr = 1677,
-};
-
-static struct sdma_script_start_addrs imx31_to2_sdma_script __initdata = {
-	.ap_2_ap_addr = 423,
-	.ap_2_bp_addr = 829,
-	.bp_2_ap_addr = 1029,
-};
-
-static struct sdma_platform_data imx31_sdma_pdata __initdata = {
-	.fw_name = "sdma-imx31-to2.bin",
-	.script_addrs = &imx31_to2_sdma_script,
-};
-
-void __init imx31_soc_init(void)
-{
-	int to_version = mx31_revision() >> 4;
-
-	mxc_register_gpio("imx31-gpio", 0, MX31_GPIO1_BASE_ADDR, SZ_16K, MX31_INT_GPIO1, 0);
-	mxc_register_gpio("imx31-gpio", 1, MX31_GPIO2_BASE_ADDR, SZ_16K, MX31_INT_GPIO2, 0);
-	mxc_register_gpio("imx31-gpio", 2, MX31_GPIO3_BASE_ADDR, SZ_16K, MX31_INT_GPIO3, 0);
-
-	if (to_version == 1) {
-		strncpy(imx31_sdma_pdata.fw_name, "sdma-imx31-to1.bin",
-			strlen(imx31_sdma_pdata.fw_name));
-		imx31_sdma_pdata.script_addrs = &imx31_to1_sdma_script;
-	}
-
-	imx_add_imx_sdma("imx31-sdma", MX31_SDMA_BASE_ADDR, MX31_INT_SDMA, &imx31_sdma_pdata);
-}

arch/arm/mach-imx/mm-imx35.c

@@ -1,109 +0,0 @@
-/*
- *  Copyright (C) 1999,2000 Arm Limited
- *  Copyright (C) 2000 Deep Blue Solutions Ltd
- *  Copyright (C) 2002 Shane Nay (shane@minirl.com)
- *  Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- *    - add MX31 specific definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/err.h>
-
-#include <asm/pgtable.h>
-#include <asm/mach/map.h>
-#include <asm/hardware/cache-l2x0.h>
-
-#include <mach/common.h>
-#include <mach/devices-common.h>
-#include <mach/hardware.h>
-#include <mach/iomux-v3.h>
-#include <mach/irqs.h>
-
-static struct map_desc mx35_io_desc[] __initdata = {
-	imx_map_entry(MX35, X_MEMC, MT_DEVICE),
-	imx_map_entry(MX35, AVIC, MT_DEVICE_NONSHARED),
-	imx_map_entry(MX35, AIPS1, MT_DEVICE_NONSHARED),
-	imx_map_entry(MX35, AIPS2, MT_DEVICE_NONSHARED),
-	imx_map_entry(MX35, SPBA0, MT_DEVICE_NONSHARED),
-};
-
-void __init mx35_map_io(void)
-{
-	iotable_init(mx35_io_desc, ARRAY_SIZE(mx35_io_desc));
-}
-
-void __init imx35_init_early(void)
-{
-	mxc_set_cpu_type(MXC_CPU_MX35);
-	mxc_iomux_v3_init(MX35_IO_ADDRESS(MX35_IOMUXC_BASE_ADDR));
-	mxc_arch_reset_init(MX35_IO_ADDRESS(MX35_WDOG_BASE_ADDR));
-}
-
-void __init mx35_init_irq(void)
-{
-	mxc_init_irq(MX35_IO_ADDRESS(MX35_AVIC_BASE_ADDR));
-}
-
-static struct sdma_script_start_addrs imx35_to1_sdma_script __initdata = {
-	.ap_2_ap_addr = 642,
-	.uart_2_mcu_addr = 817,
-	.mcu_2_app_addr = 747,
-	.uartsh_2_mcu_addr = 1183,
-	.per_2_shp_addr = 1033,
-	.mcu_2_shp_addr = 961,
-	.ata_2_mcu_addr = 1333,
-	.mcu_2_ata_addr = 1252,
-	.app_2_mcu_addr = 683,
-	.shp_2_per_addr = 1111,
-	.shp_2_mcu_addr = 892,
-};
-
-static struct sdma_script_start_addrs imx35_to2_sdma_script __initdata = {
-	.ap_2_ap_addr = 729,
-	.uart_2_mcu_addr = 904,
-	.per_2_app_addr = 1597,
-	.mcu_2_app_addr = 834,
-	.uartsh_2_mcu_addr = 1270,
-	.per_2_shp_addr = 1120,
-	.mcu_2_shp_addr = 1048,
-	.ata_2_mcu_addr = 1429,
-	.mcu_2_ata_addr = 1339,
-	.app_2_per_addr = 1531,
-	.app_2_mcu_addr = 770,
-	.shp_2_per_addr = 1198,
-	.shp_2_mcu_addr = 979,
-};
-
-static struct sdma_platform_data imx35_sdma_pdata __initdata = {
-	.fw_name = "sdma-imx35-to2.bin",
-	.script_addrs = &imx35_to2_sdma_script,
-};
-
-void __init imx35_soc_init(void)
-{
-	int to_version = mx35_revision() >> 4;
-
-	/* i.mx35 has the i.mx31 type gpio */
-	mxc_register_gpio("imx31-gpio", 0, MX35_GPIO1_BASE_ADDR, SZ_16K, MX35_INT_GPIO1, 0);
-	mxc_register_gpio("imx31-gpio", 1, MX35_GPIO2_BASE_ADDR, SZ_16K, MX35_INT_GPIO2, 0);
-	mxc_register_gpio("imx31-gpio", 2, MX35_GPIO3_BASE_ADDR, SZ_16K, MX35_INT_GPIO3, 0);
-
-	if (to_version == 1) {
-		strncpy(imx35_sdma_pdata.fw_name, "sdma-imx35-to1.bin",
-			strlen(imx35_sdma_pdata.fw_name));
-		imx35_sdma_pdata.script_addrs = &imx35_to1_sdma_script;
-	}
-
-	imx_add_imx_sdma("imx35-sdma", MX35_SDMA_BASE_ADDR, MX35_INT_SDMA, &imx35_sdma_pdata);
-}

arch/arm/mach-imx/pm-imx27.c

@@ -11,7 +11,7 @@
 #include <linux/suspend.h>
 #include <linux/io.h>
 #include <mach/system.h>
-#include <mach/mx27.h>
+#include <mach/hardware.h>
 
 static int mx27_suspend_enter(suspend_state_t state)
 {

arch/arm/mach-mx5/Kconfig

@@ -1,8 +1,9 @@
-if ARCH_MX503 || ARCH_MX51
+if ARCH_MX5
+
 # ARCH_MX5/50/53 are left to mark places where prevent multi-soc in single
 # image. So for most time, SOC_IMX50/51/53 should be used.
 
-config ARCH_MX5
+config ARCH_MX51
 	bool
 
 config ARCH_MX50
@@ -19,7 +20,6 @@ config SOC_IMX50
 	select ARCH_MXC_IOMUX_V3
 	select ARCH_MXC_AUDMUX_V2
 	select ARCH_HAS_CPUFREQ
-	select ARCH_MX5
 	select ARCH_MX50
 
 config	SOC_IMX51
@@ -30,7 +30,7 @@ config	SOC_IMX51
 	select ARCH_MXC_IOMUX_V3
 	select ARCH_MXC_AUDMUX_V2
 	select ARCH_HAS_CPUFREQ
-	select ARCH_MX5
+	select ARCH_MX51
 
 config	SOC_IMX53
 	bool
@@ -38,10 +38,8 @@ config	SOC_IMX53
 	select ARM_L1_CACHE_SHIFT_6
 	select MXC_TZIC
 	select ARCH_MXC_IOMUX_V3
-	select ARCH_MX5
 	select ARCH_MX53
 
-if ARCH_MX50_SUPPORTED
 #comment "i.MX50 machines:"
 
 config MACH_MX50_RDP
@@ -52,14 +50,10 @@ config MACH_MX50_RDP
 	select IMX_HAVE_PLATFORM_IMX_UART
 	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 	select IMX_HAVE_PLATFORM_SPI_IMX
-	select IMX_HAVE_PLATFORM_FEC
 	help
 	  Include support for MX50 reference design platform (RDP) board. This
 	  includes specific configurations for the board and its peripherals.
 
-endif # ARCH_MX50_SUPPORTED
-
-if ARCH_MX51
 comment "i.MX51 machines:"
 
 config MACH_IMX51_DT
@@ -74,9 +68,11 @@ config MACH_IMX51_DT
 config MACH_MX51_BABBAGE
 	bool "Support MX51 BABBAGE platforms"
 	select SOC_IMX51
+	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 	select IMX_HAVE_PLATFORM_IMX2_WDT
 	select IMX_HAVE_PLATFORM_IMX_I2C
 	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_MXC_EHCI
 	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 	select IMX_HAVE_PLATFORM_SPI_IMX
 	help
@@ -100,8 +96,10 @@ config MACH_MX51_3DS
 config MACH_EUKREA_CPUIMX51
 	bool "Support Eukrea CPUIMX51 module"
 	select SOC_IMX51
+	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 	select IMX_HAVE_PLATFORM_IMX_I2C
 	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_MXC_EHCI
 	select IMX_HAVE_PLATFORM_MXC_NAND
 	select IMX_HAVE_PLATFORM_SPI_IMX
 	help
@@ -128,10 +126,12 @@ endchoice
 config MACH_EUKREA_CPUIMX51SD
 	bool "Support Eukrea CPUIMX51SD module"
 	select SOC_IMX51
+	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 	select IMX_HAVE_PLATFORM_IMX_I2C
-	select IMX_HAVE_PLATFORM_SPI_IMX
 	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_MXC_EHCI
 	select IMX_HAVE_PLATFORM_MXC_NAND
+	select IMX_HAVE_PLATFORM_SPI_IMX
 	help
 	  Include support for Eukrea CPUIMX51SD platform. This includes
 	  specific configurations for the module and its peripherals.
@@ -156,6 +156,8 @@ config MX51_EFIKA_COMMON
 	bool
 	select SOC_IMX51
 	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_MXC_EHCI
+	select IMX_HAVE_PLATFORM_PATA_IMX
 	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 	select IMX_HAVE_PLATFORM_SPI_IMX
 	select MXC_ULPI if USB_ULPI
@@ -176,9 +178,6 @@ config MACH_MX51_EFIKASB
 	  Include support for Genesi Efika Smartbook. This includes specific
 	  configurations for the board and its peripherals.
 
-endif # ARCH_MX51
-
-if ARCH_MX53_SUPPORTED
 comment "i.MX53 machines:"
 
 config MACH_IMX53_DT
@@ -242,6 +241,4 @@ config MACH_MX53_ARD
 	  Include support for MX53 ARD platform. This includes specific
 	  configurations for the board and its peripherals.
 
-endif # ARCH_MX53_SUPPORTED
-
 endif

arch/arm/mach-mx5/Makefile

@@ -3,8 +3,7 @@
 #
 
 # Object file lists.
-obj-y   := cpu.o mm.o clock-mx51-mx53.o devices.o ehci.o system.o
-obj-$(CONFIG_SOC_IMX50) += mm-mx50.o
+obj-y   := cpu.o mm.o clock-mx51-mx53.o ehci.o system.o
 
 obj-$(CONFIG_PM) += pm-imx5.o
 obj-$(CONFIG_CPU_FREQ_IMX)    += cpu_op-mx51.o

arch/arm/mach-mx5/board-cpuimx51.c

@@ -22,21 +22,18 @@
 #include <linux/delay.h>
 #include <linux/io.h>
 #include <linux/interrupt.h>
-#include <linux/irq.h>
 
 #include <mach/eukrea-baseboards.h>
 #include <mach/common.h>
 #include <mach/hardware.h>
 #include <mach/iomux-mx51.h>
 
-#include <asm/irq.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
 
 #include "devices-imx51.h"
-#include "devices.h"
 
 #define CPUIMX51_USBH1_STP	IMX_GPIO_NR(1, 27)
 #define CPUIMX51_QUARTA_GPIO	IMX_GPIO_NR(3, 28)
@@ -57,7 +54,7 @@
 static struct plat_serial8250_port serial_platform_data[] = {
 	{
 		.mapbase = (unsigned long)(MX51_CS1_BASE_ADDR + 0x400000),
-		.irq = gpio_to_irq(CPUIMX51_QUARTA_GPIO),
+		.irq = IMX_GPIO_TO_IRQ(CPUIMX51_QUARTA_GPIO),
 		.irqflags = IRQF_TRIGGER_HIGH,
 		.uartclk = CPUIMX51_QUART_XTAL,
 		.regshift = CPUIMX51_QUART_REGSHIFT,
@@ -65,7 +62,7 @@ static struct plat_serial8250_port serial_platform_data[] = {
 		.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
 	}, {
 		.mapbase = (unsigned long)(MX51_CS1_BASE_ADDR + 0x800000),
-		.irq = gpio_to_irq(CPUIMX51_QUARTB_GPIO),
+		.irq = IMX_GPIO_TO_IRQ(CPUIMX51_QUARTB_GPIO),
 		.irqflags = IRQF_TRIGGER_HIGH,
 		.uartclk = CPUIMX51_QUART_XTAL,
 		.regshift = CPUIMX51_QUART_REGSHIFT,
@@ -73,7 +70,7 @@ static struct plat_serial8250_port serial_platform_data[] = {
 		.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
 	}, {
 		.mapbase = (unsigned long)(MX51_CS1_BASE_ADDR + 0x1000000),
-		.irq = gpio_to_irq(CPUIMX51_QUARTC_GPIO),
+		.irq = IMX_GPIO_TO_IRQ(CPUIMX51_QUARTC_GPIO),
 		.irqflags = IRQF_TRIGGER_HIGH,
 		.uartclk = CPUIMX51_QUART_XTAL,
 		.regshift = CPUIMX51_QUART_REGSHIFT,
@@ -81,7 +78,7 @@ static struct plat_serial8250_port serial_platform_data[] = {
 		.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
 	}, {
 		.mapbase = (unsigned long)(MX51_CS1_BASE_ADDR + 0x2000000),
-		.irq = gpio_to_irq(CPUIMX51_QUARTD_GPIO),
+		.irq = IMX_GPIO_TO_IRQ(CPUIMX51_QUARTD_GPIO),
 		.irqflags = IRQF_TRIGGER_HIGH,
 		.uartclk = CPUIMX51_QUART_XTAL,
 		.regshift = CPUIMX51_QUART_REGSHIFT,
@@ -167,7 +164,7 @@ static int initialize_otg_port(struct platform_device *pdev)
 	void __iomem *usb_base;
 	void __iomem *usbother_base;
 
-	usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K);
+	usb_base = ioremap(MX51_USB_OTG_BASE_ADDR, SZ_4K);
 	if (!usb_base)
 		return -ENOMEM;
 	usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET;
@@ -190,7 +187,7 @@ static int initialize_usbh1_port(struct platform_device *pdev)
 	void __iomem *usb_base;
 	void __iomem *usbother_base;
 
-	usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K);
+	usb_base = ioremap(MX51_USB_OTG_BASE_ADDR, SZ_4K);
 	if (!usb_base)
 		return -ENOMEM;
 	usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET;
@@ -206,17 +203,17 @@ static int initialize_usbh1_port(struct platform_device *pdev)
 			MXC_EHCI_ITC_NO_THRESHOLD);
 }
 
-static struct mxc_usbh_platform_data dr_utmi_config = {
+static const struct mxc_usbh_platform_data dr_utmi_config __initconst = {
 	.init		= initialize_otg_port,
 	.portsc	= MXC_EHCI_UTMI_16BIT,
 };
 
-static struct fsl_usb2_platform_data usb_pdata = {
+static const struct fsl_usb2_platform_data usb_pdata __initconst = {
 	.operating_mode	= FSL_USB2_DR_DEVICE,
 	.phy_mode	= FSL_USB2_PHY_UTMI_WIDE,
 };
 
-static struct mxc_usbh_platform_data usbh1_config = {
+static const struct mxc_usbh_platform_data usbh1_config __initconst = {
 	.init		= initialize_usbh1_port,
 	.portsc	= MXC_EHCI_MODE_ULPI,
 };
@@ -270,12 +267,12 @@ static void __init eukrea_cpuimx51_init(void)
 				ARRAY_SIZE(eukrea_cpuimx51_i2c_devices));
 
 	if (otg_mode_host)
-		mxc_register_device(&mxc_usbdr_host_device, &dr_utmi_config);
+		imx51_add_mxc_ehci_otg(&dr_utmi_config);
 	else {
 		initialize_otg_port(NULL);
-		mxc_register_device(&mxc_usbdr_udc_device, &usb_pdata);
+		imx51_add_fsl_usb2_udc(&usb_pdata);
 	}
-	mxc_register_device(&mxc_usbh1_device, &usbh1_config);
+	imx51_add_mxc_ehci_hs(1, &usbh1_config);
 
 #ifdef CONFIG_MACH_EUKREA_MBIMX51_BASEBOARD
 	eukrea_mbimx51_baseboard_init();
@@ -297,6 +294,7 @@ MACHINE_START(EUKREA_CPUIMX51, "Eukrea CPUIMX51 Module")
 	.map_io = mx51_map_io,
 	.init_early = imx51_init_early,
 	.init_irq = mx51_init_irq,
+	.handle_irq = imx51_handle_irq,
 	.timer = &mxc_timer,
 	.init_machine = eukrea_cpuimx51_init,
 MACHINE_END

arch/arm/mach-mx5/board-cpuimx51sd.c

@@ -22,7 +22,6 @@
 #include <linux/delay.h>
 #include <linux/io.h>
 #include <linux/interrupt.h>
-#include <linux/irq.h>
 #include <linux/i2c-gpio.h>
 #include <linux/spi/spi.h>
 #include <linux/can/platform/mcp251x.h>
@@ -32,14 +31,12 @@
 #include <mach/hardware.h>
 #include <mach/iomux-mx51.h>
 
-#include <asm/irq.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
 
 #include "devices-imx51.h"
-#include "devices.h"
 #include "cpu_op-mx51.h"
 
 #define USBH1_RST		IMX_GPIO_NR(2, 28)
@@ -108,7 +105,7 @@ static iomux_v3_cfg_t eukrea_cpuimx51sd_pads[] = {
 
 	/* Touchscreen */
 	/* IRQ */
-	_MX51_PAD_GPIO_NAND__GPIO_NAND | MUX_PAD_CTRL(PAD_CTL_PUS_22K_UP |
+	NEW_PAD_CTRL(MX51_PAD_GPIO_NAND__GPIO_NAND, PAD_CTL_PUS_22K_UP |
 			PAD_CTL_PKE | PAD_CTL_SRE_FAST |
 			PAD_CTL_DSE_HIGH | PAD_CTL_PUE | PAD_CTL_HYS),
 };
@@ -129,7 +126,7 @@ static struct i2c_board_info eukrea_cpuimx51sd_i2c_devices[] = {
 		I2C_BOARD_INFO("tsc2007", 0x49),
 		.type		= "tsc2007",
 		.platform_data	= &tsc2007_info,
-		.irq		= gpio_to_irq(TSC2007_IRQGPIO),
+		.irq		= IMX_GPIO_TO_IRQ(TSC2007_IRQGPIO),
 	},
 };
 
@@ -149,7 +146,7 @@ static int initialize_otg_port(struct platform_device *pdev)
 	void __iomem *usb_base;
 	void __iomem *usbother_base;
 
-	usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K);
+	usb_base = ioremap(MX51_USB_OTG_BASE_ADDR, SZ_4K);
 	if (!usb_base)
 		return -ENOMEM;
 	usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET;
@@ -172,7 +169,7 @@ static int initialize_usbh1_port(struct platform_device *pdev)
 	void __iomem *usb_base;
 	void __iomem *usbother_base;
 
-	usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K);
+	usb_base = ioremap(MX51_USB_OTG_BASE_ADDR, SZ_4K);
 	if (!usb_base)
 		return -ENOMEM;
 	usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET;
@@ -189,17 +186,17 @@ static int initialize_usbh1_port(struct platform_device *pdev)
 			MXC_EHCI_ITC_NO_THRESHOLD);
 }
 
-static struct mxc_usbh_platform_data dr_utmi_config = {
+static const struct mxc_usbh_platform_data dr_utmi_config __initconst = {
 	.init		= initialize_otg_port,
 	.portsc	= MXC_EHCI_UTMI_16BIT,
 };
 
-static struct fsl_usb2_platform_data usb_pdata = {
+static const struct fsl_usb2_platform_data usb_pdata __initconst = {
 	.operating_mode	= FSL_USB2_DR_DEVICE,
 	.phy_mode	= FSL_USB2_PHY_UTMI_WIDE,
 };
 
-static struct mxc_usbh_platform_data usbh1_config = {
+static const struct mxc_usbh_platform_data usbh1_config __initconst = {
 	.init		= initialize_usbh1_port,
 	.portsc	= MXC_EHCI_MODE_ULPI,
 };
@@ -245,7 +242,7 @@ static struct spi_board_info cpuimx51sd_spi_device[] = {
 		.mode		= SPI_MODE_0,
 		.chip_select     = 0,
 		.platform_data   = &mcp251x_info,
-		.irq             = gpio_to_irq(CAN_IRQGPIO)
+		.irq             = IMX_GPIO_TO_IRQ(CAN_IRQGPIO)
 	},
 };
 
@@ -303,17 +300,17 @@ static void __init eukrea_cpuimx51sd_init(void)
 	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
 
 	if (otg_mode_host)
-		mxc_register_device(&mxc_usbdr_host_device, &dr_utmi_config);
+		imx51_add_mxc_ehci_otg(&dr_utmi_config);
 	else {
 		initialize_otg_port(NULL);
-		mxc_register_device(&mxc_usbdr_udc_device, &usb_pdata);
+		imx51_add_fsl_usb2_udc(&usb_pdata);
 	}
 
 	gpio_request(USBH1_RST, "usb_rst");
 	gpio_direction_output(USBH1_RST, 0);
 	msleep(20);
 	gpio_set_value(USBH1_RST, 1);
-	mxc_register_device(&mxc_usbh1_device, &usbh1_config);
+	imx51_add_mxc_ehci_hs(1, &usbh1_config);
 
 #ifdef CONFIG_MACH_EUKREA_MBIMXSD51_BASEBOARD
 	eukrea_mbimxsd51_baseboard_init();
@@ -335,6 +332,7 @@ MACHINE_START(EUKREA_CPUIMX51SD, "Eukrea CPUIMX51SD")
 	.map_io = mx51_map_io,
 	.init_early = imx51_init_early,
 	.init_irq = mx51_init_irq,
+	.handle_irq = imx51_handle_irq,
 	.timer = &mxc_timer,
 	.init_machine = eukrea_cpuimx51sd_init,
 MACHINE_END

arch/arm/mach-mx5/board-mx50_rdp.c

@@ -219,6 +219,7 @@ MACHINE_START(MX50_RDP, "Freescale MX50 Reference Design Platform")
 	.map_io = mx50_map_io,
 	.init_early = imx50_init_early,
 	.init_irq = mx50_init_irq,
+	.handle_irq = imx50_handle_irq,
 	.timer = &mx50_rdp_timer,
 	.init_machine = mx50_rdp_board_init,
 MACHINE_END

arch/arm/mach-mx5/board-mx51_3ds.c

@@ -25,7 +25,6 @@
 #include <mach/3ds_debugboard.h>
 
 #include "devices-imx51.h"
-#include "devices.h"
 
 #define EXPIO_PARENT_INT	gpio_to_irq(IMX_GPIO_NR(1, 6))
 #define MX51_3DS_ECSPI2_CS	(GPIO_PORTC + 28)
@@ -173,6 +172,7 @@ MACHINE_START(MX51_3DS, "Freescale MX51 3-Stack Board")
 	.map_io = mx51_map_io,
 	.init_early = imx51_init_early,
 	.init_irq = mx51_init_irq,
+	.handle_irq = imx51_handle_irq,
 	.timer = &mx51_3ds_timer,
 	.init_machine = mx51_3ds_init,
 MACHINE_END

arch/arm/mach-mx5/board-mx51_babbage.c

@@ -24,14 +24,12 @@
 #include <mach/hardware.h>
 #include <mach/iomux-mx51.h>
 
-#include <asm/irq.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
 
 #include "devices-imx51.h"
-#include "devices.h"
 #include "cpu_op-mx51.h"
 
 #define BABBAGE_USB_HUB_RESET	IMX_GPIO_NR(1, 7)
@@ -176,7 +174,7 @@ static const struct imxi2c_platform_data babbage_i2c_data __initconst = {
 	.bitrate = 100000,
 };
 
-static struct imxi2c_platform_data babbage_hsi2c_data = {
+static const struct imxi2c_platform_data babbage_hsi2c_data __initconst = {
 	.bitrate = 400000,
 };
 
@@ -249,7 +247,7 @@ static int initialize_otg_port(struct platform_device *pdev)
 	void __iomem *usb_base;
 	void __iomem *usbother_base;
 
-	usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K);
+	usb_base = ioremap(MX51_USB_OTG_BASE_ADDR, SZ_4K);
 	if (!usb_base)
 		return -ENOMEM;
 	usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET;
@@ -272,7 +270,7 @@ static int initialize_usbh1_port(struct platform_device *pdev)
 	void __iomem *usb_base;
 	void __iomem *usbother_base;
 
-	usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K);
+	usb_base = ioremap(MX51_USB_OTG_BASE_ADDR, SZ_4K);
 	if (!usb_base)
 		return -ENOMEM;
 	usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET;
@@ -288,17 +286,17 @@ static int initialize_usbh1_port(struct platform_device *pdev)
 			MXC_EHCI_ITC_NO_THRESHOLD);
 }
 
-static struct mxc_usbh_platform_data dr_utmi_config = {
+static const struct mxc_usbh_platform_data dr_utmi_config __initconst = {
 	.init		= initialize_otg_port,
 	.portsc	= MXC_EHCI_UTMI_16BIT,
 };
 
-static struct fsl_usb2_platform_data usb_pdata = {
+static const struct fsl_usb2_platform_data usb_pdata __initconst = {
 	.operating_mode	= FSL_USB2_DR_DEVICE,
 	.phy_mode	= FSL_USB2_PHY_UTMI_WIDE,
 };
 
-static struct mxc_usbh_platform_data usbh1_config = {
+static const struct mxc_usbh_platform_data usbh1_config __initconst = {
 	.init		= initialize_usbh1_port,
 	.portsc	= MXC_EHCI_MODE_ULPI,
 };
@@ -363,8 +361,8 @@ void __init imx51_babbage_common_init(void)
 static void __init mx51_babbage_init(void)
 {
 	iomux_v3_cfg_t usbh1stp = MX51_PAD_USBH1_STP__USBH1_STP;
-	iomux_v3_cfg_t power_key = _MX51_PAD_EIM_A27__GPIO2_21 |
-		MUX_PAD_CTRL(PAD_CTL_SRE_FAST | PAD_CTL_DSE_HIGH | PAD_CTL_PUS_100K_UP);
+	iomux_v3_cfg_t power_key = NEW_PAD_CTRL(MX51_PAD_EIM_A27__GPIO2_21,
+		PAD_CTL_SRE_FAST | PAD_CTL_DSE_HIGH | PAD_CTL_PUS_100K_UP);
 
 	imx51_soc_init();
 
@@ -386,17 +384,17 @@ static void __init mx51_babbage_init(void)
 
 	imx51_add_imx_i2c(0, &babbage_i2c_data);
 	imx51_add_imx_i2c(1, &babbage_i2c_data);
-	mxc_register_device(&mxc_hsi2c_device, &babbage_hsi2c_data);
+	imx51_add_hsi2c(&babbage_hsi2c_data);
 
 	if (otg_mode_host)
-		mxc_register_device(&mxc_usbdr_host_device, &dr_utmi_config);
+		imx51_add_mxc_ehci_otg(&dr_utmi_config);
 	else {
 		initialize_otg_port(NULL);
-		mxc_register_device(&mxc_usbdr_udc_device, &usb_pdata);
+		imx51_add_fsl_usb2_udc(&usb_pdata);
 	}
 
 	gpio_usbh1_active();
-	mxc_register_device(&mxc_usbh1_device, &usbh1_config);
+	imx51_add_mxc_ehci_hs(1, &usbh1_config);
 	/* setback USBH1_STP to be function */
 	mxc_iomux_v3_setup_pad(usbh1stp);
 	babbage_usbhub_reset();
@@ -425,6 +423,7 @@ MACHINE_START(MX51_BABBAGE, "Freescale MX51 Babbage Board")
 	.map_io = mx51_map_io,
 	.init_early = imx51_init_early,
 	.init_irq = mx51_init_irq,
+	.handle_irq = imx51_handle_irq,
 	.timer = &mx51_babbage_timer,
 	.init_machine = mx51_babbage_init,
 MACHINE_END

arch/arm/mach-mx5/board-mx51_efikamx.c

@@ -32,14 +32,12 @@
 #include <mach/hardware.h>
 #include <mach/iomux-mx51.h>
 
-#include <asm/irq.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
 
 #include "devices-imx51.h"
-#include "devices.h"
 #include "efika.h"
 
 #define EFIKAMX_PCBID0		IMX_GPIO_NR(3, 16)
@@ -163,6 +161,11 @@ static const struct gpio_led_platform_data
 	.num_leds = ARRAY_SIZE(mx51_efikamx_leds),
 };
 
+static struct esdhc_platform_data sd_pdata = {
+	.cd_type = ESDHC_CD_CONTROLLER,
+	.wp_type = ESDHC_WP_CONTROLLER,
+};
+
 static struct gpio_keys_button mx51_efikamx_powerkey[] = {
 	{
 		.code = KEY_POWER,
@@ -239,9 +242,11 @@ static void __init mx51_efikamx_init(void)
 
 	/* on < 1.2 boards both SD controllers are used */
 	if (system_rev < 0x12) {
-		imx51_add_sdhci_esdhc_imx(1, NULL);
+		imx51_add_sdhci_esdhc_imx(0, NULL);
+		imx51_add_sdhci_esdhc_imx(1, &sd_pdata);
 		mx51_efikamx_leds[2].default_trigger = "mmc1";
-	}
+	} else
+		imx51_add_sdhci_esdhc_imx(0, &sd_pdata);
 
 	gpio_led_register_device(-1, &mx51_efikamx_leds_data);
 	imx_add_gpio_keys(&mx51_efikamx_powerkey_data);
@@ -284,6 +289,7 @@ MACHINE_START(MX51_EFIKAMX, "Genesi EfikaMX nettop")
 	.map_io = mx51_map_io,
 	.init_early = imx51_init_early,
 	.init_irq = mx51_init_irq,
+	.handle_irq = imx51_handle_irq,
 	.timer = &mx51_efikamx_timer,
 	.init_machine = mx51_efikamx_init,
 MACHINE_END

arch/arm/mach-mx5/board-mx51_efikasb.c

@@ -35,14 +35,12 @@
 #include <mach/hardware.h>
 #include <mach/iomux-mx51.h>
 
-#include <asm/irq.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
 
 #include "devices-imx51.h"
-#include "devices.h"
 #include "efika.h"
 
 #define EFIKASB_USBH2_STP	IMX_GPIO_NR(2, 20)
@@ -56,6 +54,7 @@
 #define EFIKASB_RFKILL		IMX_GPIO_NR(3, 1)
 
 #define MX51_PAD_PWRKEY IOMUX_PAD(0x48c, 0x0f8, 1, 0x0,   0, PAD_CTL_PUS_100K_UP | PAD_CTL_PKE)
+#define MX51_PAD_SD1_CD	IOMUX_PAD(0x47c, 0x0e8, 1, __NA_, 0, MX51_ESDHC_PAD_CTRL)
 
 static iomux_v3_cfg_t mx51efikasb_pads[] = {
 	/* USB HOST2 */
@@ -97,6 +96,8 @@ static iomux_v3_cfg_t mx51efikasb_pads[] = {
 
 	/* BT */
 	MX51_PAD_EIM_A17__GPIO2_11,
+
+	MX51_PAD_SD1_CD,
 };
 
 static int initialize_usbh2_port(struct platform_device *pdev)
@@ -119,7 +120,7 @@ static int initialize_usbh2_port(struct platform_device *pdev)
 	return mx51_initialize_usb_hw(pdev->id, MXC_EHCI_ITC_NO_THRESHOLD);
 }
 
-static struct mxc_usbh_platform_data usbh2_config = {
+static struct mxc_usbh_platform_data usbh2_config __initdata = {
 	.init   = initialize_usbh2_port,
 	.portsc = MXC_EHCI_MODE_ULPI,
 };
@@ -129,7 +130,7 @@ static void __init mx51_efikasb_usb(void)
 	usbh2_config.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
 			ULPI_OTG_DRVVBUS_EXT | ULPI_OTG_EXTVBUSIND);
 	if (usbh2_config.otg)
-		mxc_register_device(&mxc_usbh2_device, &usbh2_config);
+		imx51_add_mxc_ehci_hs(2, &usbh2_config);
 }
 
 static const struct gpio_led mx51_efikasb_leds[] __initconst = {
@@ -182,6 +183,18 @@ static const struct gpio_keys_platform_data mx51_efikasb_keys_data __initconst =
 	.nbuttons = ARRAY_SIZE(mx51_efikasb_keys),
 };
 
+static struct esdhc_platform_data sd0_pdata = {
+#define EFIKASB_SD1_CD	IMX_GPIO_NR(2, 27)
+	.cd_gpio = EFIKASB_SD1_CD,
+	.cd_type = ESDHC_CD_GPIO,
+	.wp_type = ESDHC_WP_CONTROLLER,
+};
+
+static struct esdhc_platform_data sd1_pdata = {
+	.cd_type = ESDHC_CD_CONTROLLER,
+	.wp_type = ESDHC_WP_CONTROLLER,
+};
+
 static struct regulator *pwgt1, *pwgt2;
 
 static void mx51_efikasb_power_off(void)
@@ -250,7 +263,8 @@ static void __init efikasb_board_init(void)
 
 	mx51_efikasb_board_id();
 	mx51_efikasb_usb();
-	imx51_add_sdhci_esdhc_imx(1, NULL);
+	imx51_add_sdhci_esdhc_imx(0, &sd0_pdata);
+	imx51_add_sdhci_esdhc_imx(1, &sd1_pdata);
 
 	gpio_led_register_device(-1, &mx51_efikasb_leds_data);
 	imx_add_gpio_keys(&mx51_efikasb_keys_data);
@@ -270,6 +284,7 @@ MACHINE_START(MX51_EFIKASB, "Genesi Efika Smartbook")
 	.map_io = mx51_map_io,
 	.init_early = imx51_init_early,
 	.init_irq = mx51_init_irq,
+	.handle_irq = imx51_handle_irq,
 	.init_machine =  efikasb_board_init,
 	.timer = &mx51_efikasb_timer,
 MACHINE_END

arch/arm/mach-mx5/board-mx53_ard.c

@@ -134,8 +134,8 @@ static struct resource ard_smsc911x_resources[] = {
 		.flags = IORESOURCE_MEM,
 	},
 	{
-		.start =  gpio_to_irq(ARD_ETHERNET_INT_B),
-		.end =  gpio_to_irq(ARD_ETHERNET_INT_B),
+		.start =  IMX_GPIO_TO_IRQ(ARD_ETHERNET_INT_B),
+		.end =  IMX_GPIO_TO_IRQ(ARD_ETHERNET_INT_B),
 		.flags = IORESOURCE_IRQ,
 	},
 };
@@ -238,6 +238,7 @@ static void __init mx53_ard_board_init(void)
 	imx53_add_imx_i2c(1, &mx53_ard_i2c2_data);
 	imx53_add_imx_i2c(2, &mx53_ard_i2c3_data);
 	imx_add_gpio_keys(&ard_button_data);
+	imx53_add_ahci_imx();
 }
 
 static void __init mx53_ard_timer_init(void)
@@ -253,6 +254,7 @@ MACHINE_START(MX53_ARD, "Freescale MX53 ARD Board")
 	.map_io = mx53_map_io,
 	.init_early = imx53_init_early,
 	.init_irq = mx53_init_irq,
+	.handle_irq = imx53_handle_irq,
 	.timer = &mx53_ard_timer,
 	.init_machine = mx53_ard_board_init,
 MACHINE_END

arch/arm/mach-mx5/board-mx53_evk.c

@@ -172,6 +172,7 @@ MACHINE_START(MX53_EVK, "Freescale MX53 EVK Board")
 	.map_io = mx53_map_io,
 	.init_early = imx53_init_early,
 	.init_irq = mx53_init_irq,
+	.handle_irq = imx53_handle_irq,
 	.timer = &mx53_evk_timer,
 	.init_machine = mx53_evk_board_init,
 MACHINE_END

arch/arm/mach-mx5/board-mx53_loco.c

@@ -22,6 +22,7 @@
 #include <linux/clk.h>
 #include <linux/delay.h>
 #include <linux/gpio.h>
+#include <linux/i2c.h>
 
 #include <mach/common.h>
 #include <mach/hardware.h>
@@ -42,6 +43,7 @@
 #define LOCO_SD3_CD			IMX_GPIO_NR(3, 11)
 #define LOCO_SD3_WP			IMX_GPIO_NR(3, 12)
 #define LOCO_SD1_CD			IMX_GPIO_NR(3, 13)
+#define LOCO_ACCEL_EN			IMX_GPIO_NR(6, 14)
 
 static iomux_v3_cfg_t mx53_loco_pads[] = {
 	/* FEC */
@@ -64,6 +66,10 @@ static iomux_v3_cfg_t mx53_loco_pads[] = {
 	MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD,
 	MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS,
 	MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD,
+	/* I2C1 */
+	MX53_PAD_CSI0_DAT8__I2C1_SDA,
+	MX53_PAD_CSI0_DAT9__I2C1_SCL,
+	MX53_PAD_NANDF_CS1__GPIO6_14,	/* Accelerometer Enable */
 	/* I2C2 */
 	MX53_PAD_KEY_COL3__I2C2_SCL,
 	MX53_PAD_KEY_ROW3__I2C2_SDA,
@@ -263,8 +269,15 @@ void __init imx53_qsb_common_init(void)
 					 ARRAY_SIZE(mx53_loco_pads));
 }
 
+static struct i2c_board_info mx53loco_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("mma8450", 0x1C),
+	},
+};
+
 static void __init mx53_loco_board_init(void)
 {
+	int ret;
 	imx53_soc_init();
 	imx53_qsb_common_init();
 
@@ -272,12 +285,20 @@ static void __init mx53_loco_board_init(void)
 	mx53_loco_fec_reset();
 	imx53_add_fec(&mx53_loco_fec_data);
 	imx53_add_imx2_wdt(0, NULL);
+
+	ret = gpio_request_one(LOCO_ACCEL_EN, GPIOF_OUT_INIT_HIGH, "accel_en");
+	if (ret)
+		pr_err("Cannot request ACCEL_EN pin: %d\n", ret);
+
+	i2c_register_board_info(0, mx53loco_i2c_devices,
+				ARRAY_SIZE(mx53loco_i2c_devices));
 	imx53_add_imx_i2c(0, &mx53_loco_i2c_data);
 	imx53_add_imx_i2c(1, &mx53_loco_i2c_data);
 	imx53_add_sdhci_esdhc_imx(0, &mx53_loco_sd1_data);
 	imx53_add_sdhci_esdhc_imx(2, &mx53_loco_sd3_data);
 	imx_add_gpio_keys(&loco_button_data);
 	gpio_led_register_device(-1, &mx53loco_leds_data);
+	imx53_add_ahci_imx();
 }
 
 static void __init mx53_loco_timer_init(void)
@@ -293,6 +314,7 @@ MACHINE_START(MX53_LOCO, "Freescale MX53 LOCO Board")
 	.map_io = mx53_map_io,
 	.init_early = imx53_init_early,
 	.init_irq = mx53_init_irq,
+	.handle_irq = imx53_handle_irq,
 	.timer = &mx53_loco_timer,
 	.init_machine = mx53_loco_board_init,
 MACHINE_END

arch/arm/mach-mx5/board-mx53_smd.c

@@ -35,6 +35,7 @@
 #include "devices-imx53.h"
 
 #define SMD_FEC_PHY_RST		IMX_GPIO_NR(7, 6)
+#define MX53_SMD_SATA_PWR_EN    IMX_GPIO_NR(3, 3)
 
 static iomux_v3_cfg_t mx53_smd_pads[] = {
 	MX53_PAD_CSI0_DAT10__UART1_TXD_MUX,
@@ -111,6 +112,19 @@ static const struct imxi2c_platform_data mx53_smd_i2c_data __initconst = {
 	.bitrate = 100000,
 };
 
+static inline void mx53_smd_ahci_pwr_on(void)
+{
+	int ret;
+
+	/* Enable SATA PWR */
+	ret = gpio_request_one(MX53_SMD_SATA_PWR_EN,
+			GPIOF_DIR_OUT | GPIOF_INIT_HIGH, "ahci-sata-pwr");
+	if (ret) {
+		pr_err("failed to enable SATA_PWR_EN: %d\n", ret);
+		return;
+	}
+}
+
 void __init imx53_smd_common_init(void)
 {
 	mxc_iomux_v3_setup_multiple_pads(mx53_smd_pads,
@@ -130,6 +144,8 @@ static void __init mx53_smd_board_init(void)
 	imx53_add_sdhci_esdhc_imx(0, NULL);
 	imx53_add_sdhci_esdhc_imx(1, NULL);
 	imx53_add_sdhci_esdhc_imx(2, NULL);
+	mx53_smd_ahci_pwr_on();
+	imx53_add_ahci_imx();
 }
 
 static void __init mx53_smd_timer_init(void)
@@ -145,6 +161,7 @@ MACHINE_START(MX53_SMD, "Freescale MX53 SMD Board")
 	.map_io = mx53_map_io,
 	.init_early = imx53_init_early,
 	.init_irq = mx53_init_irq,
+	.handle_irq = imx53_handle_irq,
 	.timer = &mx53_smd_timer,
 	.init_machine = mx53_smd_board_init,
 MACHINE_END

arch/arm/mach-mx5/clock-mx51-mx53.c

@@ -1402,6 +1402,22 @@ static struct clk esdhc4_mx53_clk = {
 	.secondary = &esdhc4_ipg_clk,
 };
 
+static struct clk sata_clk = {
+	.parent = &ipg_clk,
+	.enable = _clk_max_enable,
+	.enable_reg = MXC_CCM_CCGR4,
+	.enable_shift = MXC_CCM_CCGRx_CG1_OFFSET,
+	.disable = _clk_max_disable,
+};
+
+static struct clk ahci_phy_clk = {
+	.parent = &usb_phy1_clk,
+};
+
+static struct clk ahci_dma_clk = {
+	.parent = &ahb_clk,
+};
+
 DEFINE_CLOCK(mipi_esc_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG5_OFFSET, NULL, NULL, NULL, &pll2_sw_clk);
 DEFINE_CLOCK(mipi_hsc2_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG4_OFFSET, NULL, NULL, &mipi_esc_clk, &pll2_sw_clk);
 DEFINE_CLOCK(mipi_hsc1_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG3_OFFSET, NULL, NULL, &mipi_hsc2_clk, &pll2_sw_clk);
@@ -1419,6 +1435,10 @@ DEFINE_CLOCK(ipu_di0_clk, 0, MXC_CCM_CCGR6, MXC_CCM_CCGRx_CG5_OFFSET,
 DEFINE_CLOCK(ipu_di1_clk, 0, MXC_CCM_CCGR6, MXC_CCM_CCGRx_CG6_OFFSET,
 		NULL, NULL, &pll3_sw_clk, NULL);
 
+/* PATA */
+DEFINE_CLOCK(pata_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG0_OFFSET,
+		NULL, NULL, &ipg_clk, &spba_clk);
+
 #define _REGISTER_CLOCK(d, n, c) \
        { \
 		.dev_id = d, \
@@ -1475,6 +1495,7 @@ static struct clk_lookup mx51_lookups[] = {
 	_REGISTER_CLOCK("imx-ipuv3", "di0", ipu_di0_clk)
 	_REGISTER_CLOCK("imx-ipuv3", "di1", ipu_di1_clk)
 	_REGISTER_CLOCK(NULL, "gpc_dvfs", gpc_dvfs_clk)
+	_REGISTER_CLOCK("pata_imx", NULL, pata_clk)
 };
 
 static struct clk_lookup mx53_lookups[] = {
@@ -1508,6 +1529,10 @@ static struct clk_lookup mx53_lookups[] = {
 	_REGISTER_CLOCK("imx-ssi.1", NULL, ssi2_clk)
 	_REGISTER_CLOCK("imx-ssi.2", NULL, ssi3_clk)
 	_REGISTER_CLOCK("imx-keypad", NULL, dummy_clk)
+	_REGISTER_CLOCK("pata_imx", NULL, pata_clk)
+	_REGISTER_CLOCK("imx53-ahci.0", "ahci", sata_clk)
+	_REGISTER_CLOCK("imx53-ahci.0", "ahci_phy", ahci_phy_clk)
+	_REGISTER_CLOCK("imx53-ahci.0", "ahci_dma", ahci_dma_clk)
 };
 
 static void clk_tree_init(void)
@@ -1549,9 +1574,8 @@ int __init mx51_clocks_init(unsigned long ckil, unsigned long osc,
 	clk_enable(&main_bus_clk);
 
 	clk_enable(&iim_clk);
-	mx51_revision();
+	imx_print_silicon_rev("i.MX51", mx51_revision());
 	clk_disable(&iim_clk);
-	mx51_display_revision();
 
 	/* move usb_phy_clk to 24MHz */
 	clk_set_parent(&usb_phy1_clk, &osc_clk);
@@ -1569,7 +1593,7 @@ int __init mx51_clocks_init(unsigned long ckil, unsigned long osc,
 
 	/* System timer */
 	mxc_timer_init(&gpt_clk, MX51_IO_ADDRESS(MX51_GPT1_BASE_ADDR),
-		MX51_MXC_INT_GPT);
+		MX51_INT_GPT);
 	return 0;
 }
 
@@ -1593,9 +1617,8 @@ int __init mx53_clocks_init(unsigned long ckil, unsigned long osc,
 	clk_enable(&main_bus_clk);
 
 	clk_enable(&iim_clk);
-	mx53_revision();
+	imx_print_silicon_rev("i.MX53", mx53_revision());
 	clk_disable(&iim_clk);
-	mx53_display_revision();
 
 	/* Set SDHC parents to be PLL2 */
 	clk_set_parent(&esdhc1_clk, &pll2_sw_clk);

arch/arm/mach-mx5/cpu.c

@@ -18,7 +18,7 @@
 #include <mach/hardware.h>
 #include <asm/io.h>
 
-static int cpu_silicon_rev = -1;
+static int mx5_cpu_rev = -1;
 
 #define IIM_SREV 0x24
 #define MX50_HW_ADADIG_DIGPROG	0xB0
@@ -28,11 +28,14 @@ static int get_mx51_srev(void)
 	void __iomem *iim_base = MX51_IO_ADDRESS(MX51_IIM_BASE_ADDR);
 	u32 rev = readl(iim_base + IIM_SREV) & 0xff;
 
-	if (rev == 0x0)
+	switch (rev) {
+	case 0x0:
 		return IMX_CHIP_REVISION_2_0;
-	else if (rev == 0x10)
+	case 0x10:
 		return IMX_CHIP_REVISION_3_0;
-	return 0;
+	default:
+		return IMX_CHIP_REVISION_UNKNOWN;
+	}
 }
 
 /*
@@ -45,33 +48,13 @@ int mx51_revision(void)
 	if (!cpu_is_mx51())
 		return -EINVAL;
 
-	if (cpu_silicon_rev == -1)
-		cpu_silicon_rev = get_mx51_srev();
+	if (mx5_cpu_rev == -1)
+		mx5_cpu_rev = get_mx51_srev();
 
-	return cpu_silicon_rev;
+	return mx5_cpu_rev;
 }
 EXPORT_SYMBOL(mx51_revision);
 
-void mx51_display_revision(void)
-{
-	int rev;
-	char *srev;
-	rev = mx51_revision();
-
-	switch (rev) {
-	case IMX_CHIP_REVISION_2_0:
-		srev = IMX_CHIP_REVISION_2_0_STRING;
-		break;
-	case IMX_CHIP_REVISION_3_0:
-		srev = IMX_CHIP_REVISION_3_0_STRING;
-		break;
-	default:
-		srev = IMX_CHIP_REVISION_UNKNOWN_STRING;
-	}
-	printk(KERN_INFO "CPU identified as i.MX51, silicon rev %s\n", srev);
-}
-EXPORT_SYMBOL(mx51_display_revision);
-
 #ifdef CONFIG_NEON
 
 /*
@@ -121,10 +104,10 @@ int mx53_revision(void)
 	if (!cpu_is_mx53())
 		return -EINVAL;
 
-	if (cpu_silicon_rev == -1)
-		cpu_silicon_rev = get_mx53_srev();
+	if (mx5_cpu_rev == -1)
+		mx5_cpu_rev = get_mx53_srev();
 
-	return cpu_silicon_rev;
+	return mx5_cpu_rev;
 }
 EXPORT_SYMBOL(mx53_revision);
 
@@ -134,7 +117,7 @@ static int get_mx50_srev(void)
 	u32 rev;
 
 	if (!anatop) {
-		cpu_silicon_rev = -EINVAL;
+		mx5_cpu_rev = -EINVAL;
 		return 0;
 	}
 
@@ -159,36 +142,13 @@ int mx50_revision(void)
 	if (!cpu_is_mx50())
 		return -EINVAL;
 
-	if (cpu_silicon_rev == -1)
-		cpu_silicon_rev = get_mx50_srev();
+	if (mx5_cpu_rev == -1)
+		mx5_cpu_rev = get_mx50_srev();
 
-	return cpu_silicon_rev;
+	return mx5_cpu_rev;
 }
 EXPORT_SYMBOL(mx50_revision);
 
-void mx53_display_revision(void)
-{
-	int rev;
-	char *srev;
-	rev = mx53_revision();
-
-	switch (rev) {
-	case IMX_CHIP_REVISION_1_0:
-		srev = IMX_CHIP_REVISION_1_0_STRING;
-		break;
-	case IMX_CHIP_REVISION_2_0:
-		srev = IMX_CHIP_REVISION_2_0_STRING;
-		break;
-	case IMX_CHIP_REVISION_2_1:
-		srev = IMX_CHIP_REVISION_2_1_STRING;
-		break;
-	default:
-		srev = IMX_CHIP_REVISION_UNKNOWN_STRING;
-	}
-	printk(KERN_INFO "CPU identified as i.MX53, silicon rev %s\n", srev);
-}
-EXPORT_SYMBOL(mx53_display_revision);
-
 static int __init post_cpu_init(void)
 {
 	unsigned int reg;

arch/arm/mach-mx5/devices-imx51.h

@@ -13,9 +13,15 @@ extern const struct imx_fec_data imx51_fec_data;
 #define imx51_add_fec(pdata)	\
 	imx_add_fec(&imx51_fec_data, pdata)
 
+extern const struct imx_fsl_usb2_udc_data imx51_fsl_usb2_udc_data;
+#define imx51_add_fsl_usb2_udc(pdata)	\
+	imx_add_fsl_usb2_udc(&imx51_fsl_usb2_udc_data, pdata)
+
 extern const struct imx_imx_i2c_data imx51_imx_i2c_data[];
 #define imx51_add_imx_i2c(id, pdata)	\
 	imx_add_imx_i2c(&imx51_imx_i2c_data[id], pdata)
+#define imx51_add_hsi2c(pdata)	\
+	imx51_add_imx_i2c(2, pdata)
 
 extern const struct imx_imx_ssi_data imx51_imx_ssi_data[];
 #define imx51_add_imx_ssi(id, pdata)	\
@@ -25,6 +31,13 @@ extern const struct imx_imx_uart_1irq_data imx51_imx_uart_data[];
 #define imx51_add_imx_uart(id, pdata)	\
 	imx_add_imx_uart_1irq(&imx51_imx_uart_data[id], pdata)
 
+extern const struct imx_mxc_ehci_data imx51_mxc_ehci_otg_data;
+#define imx51_add_mxc_ehci_otg(pdata)	\
+	imx_add_mxc_ehci(&imx51_mxc_ehci_otg_data, pdata)
+extern const struct imx_mxc_ehci_data imx51_mxc_ehci_hs_data[];
+#define imx51_add_mxc_ehci_hs(id, pdata)	\
+	imx_add_mxc_ehci(&imx51_mxc_ehci_hs_data[id - 1], pdata)
+
 extern const struct imx_mxc_nand_data imx51_mxc_nand_data;
 #define imx51_add_mxc_nand(pdata)	\
 	imx_add_mxc_nand(&imx51_mxc_nand_data, pdata)
@@ -52,3 +65,7 @@ extern const struct imx_mxc_pwm_data imx51_mxc_pwm_data[];
 extern const struct imx_imx_keypad_data imx51_imx_keypad_data;
 #define imx51_add_imx_keypad(pdata)	\
 	imx_add_imx_keypad(&imx51_imx_keypad_data, pdata)
+
+extern const struct imx_pata_imx_data imx51_pata_imx_data;
+#define imx51_add_pata_imx() \
+	imx_add_pata_imx(&imx51_pata_imx_data)

arch/arm/mach-mx5/devices-imx53.h

@@ -40,3 +40,9 @@ extern const struct imx_imx_ssi_data imx53_imx_ssi_data[];
 extern const struct imx_imx_keypad_data imx53_imx_keypad_data;
 #define imx53_add_imx_keypad(pdata)	\
 	imx_add_imx_keypad(&imx53_imx_keypad_data, pdata)
+
+extern const struct imx_pata_imx_data imx53_pata_imx_data;
+#define imx53_add_pata_imx() \
+	imx_add_pata_imx(&imx53_pata_imx_data)
+
+extern struct platform_device *__init imx53_add_ahci_imx(void);

arch/arm/mach-mx5/devices.c

@@ -1,120 +0,0 @@
-/*
- * Copyright 2009 Amit Kucheria <amit.kucheria@canonical.com>
- * Copyright (C) 2010 Freescale Semiconductor, Inc.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include <linux/platform_device.h>
-#include <linux/dma-mapping.h>
-#include <mach/hardware.h>
-#include <mach/imx-uart.h>
-#include <mach/irqs.h>
-
-static struct resource mxc_hsi2c_resources[] = {
-	{
-		.start = MX51_HSI2C_DMA_BASE_ADDR,
-		.end = MX51_HSI2C_DMA_BASE_ADDR + SZ_16K - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = MX51_MXC_INT_HS_I2C,
-		.end = MX51_MXC_INT_HS_I2C,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device mxc_hsi2c_device = {
-	.name = "imx-i2c",
-	.id = 2,
-	.num_resources = ARRAY_SIZE(mxc_hsi2c_resources),
-	.resource = mxc_hsi2c_resources
-};
-
-static u64 usb_dma_mask = DMA_BIT_MASK(32);
-
-static struct resource usbotg_resources[] = {
-	{
-		.start = MX51_OTG_BASE_ADDR,
-		.end = MX51_OTG_BASE_ADDR + 0x1ff,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = MX51_MXC_INT_USB_OTG,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-/* OTG gadget device */
-struct platform_device mxc_usbdr_udc_device = {
-	.name		= "fsl-usb2-udc",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(usbotg_resources),
-	.resource	= usbotg_resources,
-	.dev		= {
-		.dma_mask		= &usb_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-};
-
-struct platform_device mxc_usbdr_host_device = {
-	.name = "mxc-ehci",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(usbotg_resources),
-	.resource = usbotg_resources,
-	.dev = {
-		.dma_mask = &usb_dma_mask,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-	},
-};
-
-static struct resource usbh1_resources[] = {
-	{
-		.start = MX51_OTG_BASE_ADDR + 0x200,
-		.end = MX51_OTG_BASE_ADDR + 0x200 + 0x1ff,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = MX51_MXC_INT_USB_H1,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device mxc_usbh1_device = {
-	.name = "mxc-ehci",
-	.id = 1,
-	.num_resources = ARRAY_SIZE(usbh1_resources),
-	.resource = usbh1_resources,
-	.dev = {
-		.dma_mask = &usb_dma_mask,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-	},
-};
-
-static struct resource usbh2_resources[] = {
-	{
-		.start = MX51_OTG_BASE_ADDR + 0x400,
-		.end = MX51_OTG_BASE_ADDR + 0x400 + 0x1ff,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = MX51_MXC_INT_USB_H2,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device mxc_usbh2_device = {
-	.name = "mxc-ehci",
-	.id = 2,
-	.num_resources = ARRAY_SIZE(usbh2_resources),
-	.resource = usbh2_resources,
-	.dev = {
-		.dma_mask = &usb_dma_mask,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-	},
-};

arch/arm/mach-mx5/devices.h

@@ -1,5 +0,0 @@
-extern struct platform_device mxc_usbdr_host_device;
-extern struct platform_device mxc_usbh1_device;
-extern struct platform_device mxc_usbh2_device;
-extern struct platform_device mxc_usbdr_udc_device;
-extern struct platform_device mxc_hsi2c_device;

arch/arm/mach-mx5/ehci.c

@@ -52,7 +52,7 @@ int mx51_initialize_usb_hw(int port, unsigned int flags)
 	void __iomem *usbother_base;
 	int ret = 0;
 
-	usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K);
+	usb_base = ioremap(MX51_USB_OTG_BASE_ADDR, SZ_4K);
 	if (!usb_base) {
 		printk(KERN_ERR "%s(): ioremap failed\n", __func__);
 		return -ENOMEM;

arch/arm/mach-mx5/eukrea_mbimx51-baseboard.c

@@ -28,7 +28,6 @@
 #include <asm/mach/arch.h>
 
 #include "devices-imx51.h"
-#include "devices.h"
 
 #define MBIMX51_TSC2007_GPIO	IMX_GPIO_NR(3, 30)
 #define MBIMX51_LED0		IMX_GPIO_NR(3, 5)
@@ -160,7 +159,7 @@ struct tsc2007_platform_data tsc2007_data = {
 static struct i2c_board_info mbimx51_i2c_devices[] = {
 	{
 		I2C_BOARD_INFO("tsc2007", 0x49),
-		.irq  = gpio_to_irq(MBIMX51_TSC2007_GPIO),
+		.irq  = IMX_GPIO_TO_IRQ(MBIMX51_TSC2007_GPIO),
 		.platform_data = &tsc2007_data,
 	}, {
 		I2C_BOARD_INFO("tlv320aic23", 0x1a),

arch/arm/mach-mx5/eukrea_mbimxsd-baseboard.c

@@ -24,7 +24,6 @@
 
 #include <linux/gpio.h>
 #include <linux/interrupt.h>
-#include <linux/irq.h>
 #include <linux/leds.h>
 #include <linux/platform_device.h>
 #include <linux/input.h>
@@ -41,13 +40,12 @@
 #include <mach/audmux.h>
 
 #include "devices-imx51.h"
-#include "devices.h"
 
 static iomux_v3_cfg_t eukrea_mbimxsd_pads[] = {
 	/* LED */
 	MX51_PAD_NANDF_D10__GPIO3_30,
 	/* SWITCH */
-	_MX51_PAD_NANDF_D9__GPIO3_31 | MUX_PAD_CTRL(PAD_CTL_PUS_22K_UP |
+	NEW_PAD_CTRL(MX51_PAD_NANDF_D9__GPIO3_31, PAD_CTL_PUS_22K_UP |
 			PAD_CTL_PKE | PAD_CTL_SRE_FAST |
 			PAD_CTL_DSE_HIGH | PAD_CTL_PUE | PAD_CTL_HYS),
 	/* UART2 */
@@ -66,7 +64,7 @@ static iomux_v3_cfg_t eukrea_mbimxsd_pads[] = {
 	MX51_PAD_SD1_DATA2__SD1_DATA2,
 	MX51_PAD_SD1_DATA3__SD1_DATA3,
 	/* SD1 CD */
-	_MX51_PAD_GPIO1_0__SD1_CD | MUX_PAD_CTRL(PAD_CTL_PUS_22K_UP |
+	NEW_PAD_CTRL(MX51_PAD_GPIO1_0__SD1_CD, PAD_CTL_PUS_22K_UP |
 			PAD_CTL_PKE | PAD_CTL_SRE_FAST |
 			PAD_CTL_DSE_HIGH | PAD_CTL_PUE | PAD_CTL_HYS),
 };

arch/arm/mach-mx5/mm-mx50.c

@@ -1,72 +0,0 @@
-/*
- * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
-
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
-
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- *
- * Create static mapping between physical to virtual memory.
- */
-
-#include <linux/mm.h>
-#include <linux/init.h>
-
-#include <asm/mach/map.h>
-
-#include <mach/hardware.h>
-#include <mach/common.h>
-#include <mach/iomux-v3.h>
-#include <mach/irqs.h>
-
-/*
- * Define the MX50 memory map.
- */
-static struct map_desc mx50_io_desc[] __initdata = {
-	imx_map_entry(MX50, TZIC, MT_DEVICE),
-	imx_map_entry(MX50, SPBA0, MT_DEVICE),
-	imx_map_entry(MX50, AIPS1, MT_DEVICE),
-	imx_map_entry(MX50, AIPS2, MT_DEVICE),
-};
-
-/*
- * This function initializes the memory map. It is called during the
- * system startup to create static physical to virtual memory mappings
- * for the IO modules.
- */
-void __init mx50_map_io(void)
-{
-	iotable_init(mx50_io_desc, ARRAY_SIZE(mx50_io_desc));
-}
-
-void __init imx50_init_early(void)
-{
-	mxc_set_cpu_type(MXC_CPU_MX50);
-	mxc_iomux_v3_init(MX50_IO_ADDRESS(MX50_IOMUXC_BASE_ADDR));
-	mxc_arch_reset_init(MX50_IO_ADDRESS(MX50_WDOG_BASE_ADDR));
-}
-
-void __init mx50_init_irq(void)
-{
-	tzic_init_irq(MX50_IO_ADDRESS(MX50_TZIC_BASE_ADDR));
-}
-
-void __init imx50_soc_init(void)
-{
-	/* i.mx50 has the i.mx31 type gpio */
-	mxc_register_gpio("imx31-gpio", 0, MX50_GPIO1_BASE_ADDR, SZ_16K, MX50_INT_GPIO1_LOW, MX50_INT_GPIO1_HIGH);
-	mxc_register_gpio("imx31-gpio", 1, MX50_GPIO2_BASE_ADDR, SZ_16K, MX50_INT_GPIO2_LOW, MX50_INT_GPIO2_HIGH);
-	mxc_register_gpio("imx31-gpio", 2, MX50_GPIO3_BASE_ADDR, SZ_16K, MX50_INT_GPIO3_LOW, MX50_INT_GPIO3_HIGH);
-	mxc_register_gpio("imx31-gpio", 3, MX50_GPIO4_BASE_ADDR, SZ_16K, MX50_INT_GPIO4_LOW, MX50_INT_GPIO4_HIGH);
-	mxc_register_gpio("imx31-gpio", 4, MX50_GPIO5_BASE_ADDR, SZ_16K, MX50_INT_GPIO5_LOW, MX50_INT_GPIO5_HIGH);
-	mxc_register_gpio("imx31-gpio", 5, MX50_GPIO6_BASE_ADDR, SZ_16K, MX50_INT_GPIO6_LOW, MX50_INT_GPIO6_HIGH);
-}

arch/arm/mach-mx5/mm.c

@@ -21,12 +21,27 @@
 #include <mach/devices-common.h>
 #include <mach/iomux-v3.h>
 
+static void imx5_idle(void)
+{
+	mx5_cpu_lp_set(WAIT_UNCLOCKED_POWER_OFF);
+}
+
+/*
+ * Define the MX50 memory map.
+ */
+static struct map_desc mx50_io_desc[] __initdata = {
+	imx_map_entry(MX50, TZIC, MT_DEVICE),
+	imx_map_entry(MX50, SPBA0, MT_DEVICE),
+	imx_map_entry(MX50, AIPS1, MT_DEVICE),
+	imx_map_entry(MX50, AIPS2, MT_DEVICE),
+};
+
 /*
  * Define the MX51 memory map.
  */
 static struct map_desc mx51_io_desc[] __initdata = {
+	imx_map_entry(MX51, TZIC, MT_DEVICE),
 	imx_map_entry(MX51, IRAM, MT_DEVICE),
-	imx_map_entry(MX51, DEBUG, MT_DEVICE),
 	imx_map_entry(MX51, AIPS1, MT_DEVICE),
 	imx_map_entry(MX51, SPBA0, MT_DEVICE),
 	imx_map_entry(MX51, AIPS2, MT_DEVICE),
@@ -36,6 +51,7 @@ static struct map_desc mx51_io_desc[] __initdata = {
  * Define the MX53 memory map.
  */
 static struct map_desc mx53_io_desc[] __initdata = {
+	imx_map_entry(MX53, TZIC, MT_DEVICE),
 	imx_map_entry(MX53, AIPS1, MT_DEVICE),
 	imx_map_entry(MX53, SPBA0, MT_DEVICE),
 	imx_map_entry(MX53, AIPS2, MT_DEVICE),
@@ -46,21 +62,34 @@ static struct map_desc mx53_io_desc[] __initdata = {
  * system startup to create static physical to virtual memory mappings
  * for the IO modules.
  */
+void __init mx50_map_io(void)
+{
+	iotable_init(mx50_io_desc, ARRAY_SIZE(mx50_io_desc));
+}
+
 void __init mx51_map_io(void)
 {
 	iotable_init(mx51_io_desc, ARRAY_SIZE(mx51_io_desc));
 }
 
+void __init mx53_map_io(void)
+{
+	iotable_init(mx53_io_desc, ARRAY_SIZE(mx53_io_desc));
+}
+
+void __init imx50_init_early(void)
+{
+	mxc_set_cpu_type(MXC_CPU_MX50);
+	mxc_iomux_v3_init(MX50_IO_ADDRESS(MX50_IOMUXC_BASE_ADDR));
+	mxc_arch_reset_init(MX50_IO_ADDRESS(MX50_WDOG_BASE_ADDR));
+}
+
 void __init imx51_init_early(void)
 {
 	mxc_set_cpu_type(MXC_CPU_MX51);
 	mxc_iomux_v3_init(MX51_IO_ADDRESS(MX51_IOMUXC_BASE_ADDR));
 	mxc_arch_reset_init(MX51_IO_ADDRESS(MX51_WDOG1_BASE_ADDR));
-}
-
-void __init mx53_map_io(void)
-{
-	iotable_init(mx53_io_desc, ARRAY_SIZE(mx53_io_desc));
+	imx_idle = imx5_idle;
 }
 
 void __init imx53_init_early(void)
@@ -70,35 +99,19 @@ void __init imx53_init_early(void)
 	mxc_arch_reset_init(MX53_IO_ADDRESS(MX53_WDOG1_BASE_ADDR));
 }
 
-void __init mx51_init_irq(void)
+void __init mx50_init_irq(void)
 {
-	unsigned long tzic_addr;
-	void __iomem *tzic_virt;
-
-	if (mx51_revision() < IMX_CHIP_REVISION_2_0)
-		tzic_addr = MX51_TZIC_BASE_ADDR_TO1;
-	else
-		tzic_addr = MX51_TZIC_BASE_ADDR;
-
-	tzic_virt = ioremap(tzic_addr, SZ_16K);
-	if (!tzic_virt)
-		panic("unable to map TZIC interrupt controller\n");
+	tzic_init_irq(MX50_IO_ADDRESS(MX50_TZIC_BASE_ADDR));
+}
 
-	tzic_init_irq(tzic_virt);
+void __init mx51_init_irq(void)
+{
+	tzic_init_irq(MX51_IO_ADDRESS(MX51_TZIC_BASE_ADDR));
 }
 
 void __init mx53_init_irq(void)
 {
-	unsigned long tzic_addr;
-	void __iomem *tzic_virt;
-
-	tzic_addr = MX53_TZIC_BASE_ADDR;
-
-	tzic_virt = ioremap(tzic_addr, SZ_16K);
-	if (!tzic_virt)
-		panic("unable to map TZIC interrupt controller\n");
-
-	tzic_init_irq(tzic_virt);
+	tzic_init_irq(MX53_IO_ADDRESS(MX53_TZIC_BASE_ADDR));
 }
 
 static struct sdma_script_start_addrs imx51_sdma_script __initdata = {
@@ -138,13 +151,24 @@ static struct sdma_platform_data imx53_sdma_pdata __initdata = {
 	.script_addrs = &imx53_sdma_script,
 };
 
+void __init imx50_soc_init(void)
+{
+	/* i.mx50 has the i.mx31 type gpio */
+	mxc_register_gpio("imx31-gpio", 0, MX50_GPIO1_BASE_ADDR, SZ_16K, MX50_INT_GPIO1_LOW, MX50_INT_GPIO1_HIGH);
+	mxc_register_gpio("imx31-gpio", 1, MX50_GPIO2_BASE_ADDR, SZ_16K, MX50_INT_GPIO2_LOW, MX50_INT_GPIO2_HIGH);
+	mxc_register_gpio("imx31-gpio", 2, MX50_GPIO3_BASE_ADDR, SZ_16K, MX50_INT_GPIO3_LOW, MX50_INT_GPIO3_HIGH);
+	mxc_register_gpio("imx31-gpio", 3, MX50_GPIO4_BASE_ADDR, SZ_16K, MX50_INT_GPIO4_LOW, MX50_INT_GPIO4_HIGH);
+	mxc_register_gpio("imx31-gpio", 4, MX50_GPIO5_BASE_ADDR, SZ_16K, MX50_INT_GPIO5_LOW, MX50_INT_GPIO5_HIGH);
+	mxc_register_gpio("imx31-gpio", 5, MX50_GPIO6_BASE_ADDR, SZ_16K, MX50_INT_GPIO6_LOW, MX50_INT_GPIO6_HIGH);
+}
+
 void __init imx51_soc_init(void)
 {
 	/* i.mx51 has the i.mx31 type gpio */
-	mxc_register_gpio("imx31-gpio", 0, MX51_GPIO1_BASE_ADDR, SZ_16K, MX51_MXC_INT_GPIO1_LOW, MX51_MXC_INT_GPIO1_HIGH);
-	mxc_register_gpio("imx31-gpio", 1, MX51_GPIO2_BASE_ADDR, SZ_16K, MX51_MXC_INT_GPIO2_LOW, MX51_MXC_INT_GPIO2_HIGH);
-	mxc_register_gpio("imx31-gpio", 2, MX51_GPIO3_BASE_ADDR, SZ_16K, MX51_MXC_INT_GPIO3_LOW, MX51_MXC_INT_GPIO3_HIGH);
-	mxc_register_gpio("imx31-gpio", 3, MX51_GPIO4_BASE_ADDR, SZ_16K, MX51_MXC_INT_GPIO4_LOW, MX51_MXC_INT_GPIO4_HIGH);
+	mxc_register_gpio("imx31-gpio", 0, MX51_GPIO1_BASE_ADDR, SZ_16K, MX51_INT_GPIO1_LOW, MX51_INT_GPIO1_HIGH);
+	mxc_register_gpio("imx31-gpio", 1, MX51_GPIO2_BASE_ADDR, SZ_16K, MX51_INT_GPIO2_LOW, MX51_INT_GPIO2_HIGH);
+	mxc_register_gpio("imx31-gpio", 2, MX51_GPIO3_BASE_ADDR, SZ_16K, MX51_INT_GPIO3_LOW, MX51_INT_GPIO3_HIGH);
+	mxc_register_gpio("imx31-gpio", 3, MX51_GPIO4_BASE_ADDR, SZ_16K, MX51_INT_GPIO4_LOW, MX51_INT_GPIO4_HIGH);
 
 	/* i.mx51 has the i.mx35 type sdma */
 	imx_add_imx_sdma("imx35-sdma", MX51_SDMA_BASE_ADDR, MX51_INT_SDMA, &imx51_sdma_pdata);

arch/arm/mach-mx5/mx51_efika.c

@@ -34,14 +34,12 @@
 #include <linux/usb/ulpi.h>
 #include <mach/ulpi.h>
 
-#include <asm/irq.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
 
 #include "devices-imx51.h"
-#include "devices.h"
 #include "efika.h"
 #include "cpu_op-mx51.h"
 
@@ -133,7 +131,7 @@ static int initialize_otg_port(struct platform_device *pdev)
 	u32 v;
 	void __iomem *usb_base;
 	void __iomem *usbother_base;
-	usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K);
+	usb_base = ioremap(MX51_USB_OTG_BASE_ADDR, SZ_4K);
 	if (!usb_base)
 		return -ENOMEM;
 	usbother_base = (void __iomem *)(usb_base + MX5_USBOTHER_REGS_OFFSET);
@@ -150,7 +148,7 @@ static int initialize_otg_port(struct platform_device *pdev)
 	return mx51_initialize_usb_hw(pdev->id, MXC_EHCI_INTERNAL_PHY);
 }
 
-static struct mxc_usbh_platform_data dr_utmi_config = {
+static const struct mxc_usbh_platform_data dr_utmi_config __initconst = {
 	.init   = initialize_otg_port,
 	.portsc = MXC_EHCI_UTMI_16BIT,
 };
@@ -170,7 +168,7 @@ static int initialize_usbh1_port(struct platform_device *pdev)
 	gpio_set_value(EFIKAMX_USBH1_STP, 1);
 	msleep(1);
 
-	usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K);
+	usb_base = ioremap(MX51_USB_OTG_BASE_ADDR, SZ_4K);
 	socregs_base = (void __iomem *)(usb_base + MX5_USBOTHER_REGS_OFFSET);
 
 	/* The clock for the USBH1 ULPI port will come externally */
@@ -189,7 +187,7 @@ static int initialize_usbh1_port(struct platform_device *pdev)
 	return mx51_initialize_usb_hw(pdev->id, MXC_EHCI_ITC_NO_THRESHOLD);
 }
 
-static struct mxc_usbh_platform_data usbh1_config = {
+static struct mxc_usbh_platform_data usbh1_config __initdata = {
 	.init   = initialize_usbh1_port,
 	.portsc = MXC_EHCI_MODE_ULPI,
 };
@@ -217,9 +215,9 @@ static void __init mx51_efika_usb(void)
 	usbh1_config.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
 			ULPI_OTG_DRVVBUS_EXT | ULPI_OTG_EXTVBUSIND);
 
-	mxc_register_device(&mxc_usbdr_host_device, &dr_utmi_config);
+	imx51_add_mxc_ehci_otg(&dr_utmi_config);
 	if (usbh1_config.otg)
-		mxc_register_device(&mxc_usbh1_device, &usbh1_config);
+		imx51_add_mxc_ehci_hs(1, &usbh1_config);
 }
 
 static struct mtd_partition mx51_efika_spi_nor_partitions[] = {
@@ -589,7 +587,7 @@ static struct spi_board_info mx51_efika_spi_board_info[] __initdata = {
 		.bus_num = 0,
 		.chip_select = 0,
 		.platform_data = &mx51_efika_mc13892_data,
-		.irq = gpio_to_irq(EFIKAMX_PMIC),
+		.irq = IMX_GPIO_TO_IRQ(EFIKAMX_PMIC),
 	},
 };
 
@@ -609,7 +607,6 @@ void __init efika_board_common_init(void)
 					ARRAY_SIZE(mx51efika_pads));
 	imx51_add_imx_uart(0, &uart_pdata);
 	mx51_efika_usb();
-	imx51_add_sdhci_esdhc_imx(0, NULL);
 
 	/* FIXME: comes from original code. check this. */
 	if (mx51_revision() < IMX_CHIP_REVISION_2_0)
@@ -627,8 +624,9 @@ void __init efika_board_common_init(void)
 		ARRAY_SIZE(mx51_efika_spi_board_info));
 	imx51_add_ecspi(0, &mx51_efika_spi_pdata);
 
+	imx51_add_pata_imx();
+
 #if defined(CONFIG_CPU_FREQ_IMX)
 	get_cpu_op = mx51_get_cpu_op;
 #endif
 }
-

arch/arm/mach-mx5/pm-imx5.c

@@ -14,7 +14,8 @@
 #include <linux/err.h>
 #include <asm/cacheflush.h>
 #include <asm/tlbflush.h>
-#include <mach/system.h>
+#include <mach/common.h>
+#include <mach/hardware.h>
 #include "crm_regs.h"
 
 static struct clk *gpc_dvfs_clk;

arch/arm/mach-mx5/system.c

@@ -13,6 +13,7 @@
 #include <linux/platform_device.h>
 #include <linux/io.h>
 #include <mach/hardware.h>
+#include <mach/common.h>
 #include "crm_regs.h"
 
 /* set cpu low power mode before WFI instruction. This function is called

arch/arm/mach-mxs/Kconfig

@@ -23,6 +23,7 @@ config MACH_STMP378X_DEVB
 	select MXS_HAVE_AMBA_DUART
 	select MXS_HAVE_PLATFORM_AUART
 	select MXS_HAVE_PLATFORM_MXS_MMC
+	select MXS_HAVE_PLATFORM_RTC_STMP3XXX
 	help
 	  Include support for STMP378x-devb platform. This includes specific
 	  configurations for the board and its peripherals.
@@ -34,6 +35,7 @@ config MACH_MX23EVK
 	select MXS_HAVE_PLATFORM_AUART
 	select MXS_HAVE_PLATFORM_MXS_MMC
 	select MXS_HAVE_PLATFORM_MXSFB
+	select MXS_HAVE_PLATFORM_RTC_STMP3XXX
 	help
 	  Include support for MX23EVK platform. This includes specific
 	  configurations for the board and its peripherals.
@@ -48,6 +50,9 @@ config MACH_MX28EVK
 	select MXS_HAVE_PLATFORM_FLEXCAN
 	select MXS_HAVE_PLATFORM_MXS_MMC
 	select MXS_HAVE_PLATFORM_MXSFB
+	select MXS_HAVE_PLATFORM_MXS_SAIF
+	select MXS_HAVE_PLATFORM_MXS_I2C
+	select MXS_HAVE_PLATFORM_RTC_STMP3XXX
 	select MXS_OCOTP
 	help
 	  Include support for MX28EVK platform. This includes specific
@@ -63,9 +68,27 @@ config MODULE_TX28
 	select MXS_HAVE_PLATFORM_MXS_I2C
 	select MXS_HAVE_PLATFORM_MXS_MMC
 	select MXS_HAVE_PLATFORM_MXS_PWM
+	select MXS_HAVE_PLATFORM_RTC_STMP3XXX
+
+config MODULE_M28
+	bool
+	select SOC_IMX28
+	select LEDS_GPIO_REGISTER
+	select MXS_HAVE_AMBA_DUART
+	select MXS_HAVE_PLATFORM_AUART
+	select MXS_HAVE_PLATFORM_FEC
+	select MXS_HAVE_PLATFORM_FLEXCAN
+	select MXS_HAVE_PLATFORM_MXS_I2C
+	select MXS_HAVE_PLATFORM_MXS_MMC
+	select MXS_HAVE_PLATFORM_MXSFB
+	select MXS_OCOTP
 
 config MACH_TX28
 	bool "Ka-Ro TX28 module"
 	select MODULE_TX28
 
+config MACH_M28EVK
+	bool "Support DENX M28EVK Platform"
+	select MODULE_M28
+
 endif

arch/arm/mach-mxs/Makefile

@@ -1,15 +1,16 @@
 # Common support
-obj-y := clock.o devices.o icoll.o iomux.o system.o timer.o
+obj-y := clock.o devices.o icoll.o iomux.o system.o timer.o mm.o
 
 obj-$(CONFIG_MXS_OCOTP) += ocotp.o
 obj-$(CONFIG_PM) += pm.o
 
-obj-$(CONFIG_SOC_IMX23) += clock-mx23.o mm-mx23.o
-obj-$(CONFIG_SOC_IMX28) += clock-mx28.o mm-mx28.o
+obj-$(CONFIG_SOC_IMX23) += clock-mx23.o
+obj-$(CONFIG_SOC_IMX28) += clock-mx28.o
 
 obj-$(CONFIG_MACH_STMP378X_DEVB) += mach-stmp378x_devb.o
 obj-$(CONFIG_MACH_MX23EVK) += mach-mx23evk.o
 obj-$(CONFIG_MACH_MX28EVK) += mach-mx28evk.o
+obj-$(CONFIG_MACH_M28EVK)    += mach-m28evk.o
 obj-$(CONFIG_MODULE_TX28) += module-tx28.o
 obj-$(CONFIG_MACH_TX28)    += mach-tx28.o
 

arch/arm/mach-mxs/clock-mx28.c

@@ -640,6 +640,8 @@ static struct clk_lookup lookups[] = {
 	_REGISTER_CLOCK(NULL, "lradc", lradc_clk)
 	_REGISTER_CLOCK(NULL, "spdif", spdif_clk)
 	_REGISTER_CLOCK("imx28-fb", NULL, lcdif_clk)
+	_REGISTER_CLOCK("mxs-saif.0", NULL, saif0_clk)
+	_REGISTER_CLOCK("mxs-saif.1", NULL, saif1_clk)
 };
 
 static int clk_misc_init(void)
@@ -708,11 +710,11 @@ static int clk_misc_init(void)
 
 	/* SAIF has to use frac div for functional operation */
 	reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_SAIF0);
-	reg &= ~BM_CLKCTRL_SAIF0_DIV_FRAC_EN;
+	reg |= BM_CLKCTRL_SAIF0_DIV_FRAC_EN;
 	__raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_SAIF0);
 
 	reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_SAIF1);
-	reg &= ~BM_CLKCTRL_SAIF1_DIV_FRAC_EN;
+	reg |= BM_CLKCTRL_SAIF1_DIV_FRAC_EN;
 	__raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_SAIF1);
 
 	/*
@@ -738,11 +740,17 @@ static int clk_misc_init(void)
 	__raw_writel(BM_CLKCTRL_CPU_INTERRUPT_WAIT,
 			CLKCTRL_BASE_ADDR + HW_CLKCTRL_CPU_SET);
 
-	/* Extra fec clock setting */
-	reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_ENET);
-	reg &= ~BM_CLKCTRL_ENET_SLEEP;
-	reg |= BM_CLKCTRL_ENET_CLK_OUT_EN;
-	__raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_ENET);
+	/*
+	 * Extra fec clock setting
+	 * The DENX M28 uses an external clock source
+	 * and the clock output must not be enabled
+	 */
+	if (!machine_is_m28evk()) {
+		reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_ENET);
+		reg &= ~BM_CLKCTRL_ENET_SLEEP;
+		reg |= BM_CLKCTRL_ENET_CLK_OUT_EN;
+		__raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_ENET);
+	}
 
 	/*
 	 * 480 MHz seems too high to be ssp clock source directly,
@@ -774,6 +782,8 @@ int __init mx28_clocks_init(void)
 	clk_enable(&uart_clk);
 
 	clk_set_parent(&lcdif_clk, &ref_pix_clk);
+	clk_set_parent(&saif0_clk, &pll0_clk);
+	clk_set_parent(&saif1_clk, &pll0_clk);
 
 	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
 

arch/arm/mach-mxs/devices-mx23.h

@@ -29,3 +29,5 @@ extern const struct mxs_mxs_mmc_data mx23_mxs_mmc_data[] __initconst;
 
 struct platform_device *__init mx23_add_mxsfb(
 		const struct mxsfb_platform_data *pdata);
+
+struct platform_device *__init mx23_add_rtc_stmp3xxx(void);

arch/arm/mach-mxs/devices-mx28.h

@@ -45,3 +45,8 @@ extern const struct mxs_mxs_mmc_data mx28_mxs_mmc_data[] __initconst;
 
 struct platform_device *__init mx28_add_mxsfb(
 		const struct mxsfb_platform_data *pdata);
+
+extern const struct mxs_saif_data mx28_saif_data[] __initconst;
+#define mx28_add_saif(id)              mxs_add_saif(&mx28_saif_data[id])
+
+struct platform_device *__init mx28_add_rtc_stmp3xxx(void);

arch/arm/mach-mxs/devices/Kconfig

@@ -23,3 +23,9 @@ config MXS_HAVE_PLATFORM_MXS_PWM
 
 config MXS_HAVE_PLATFORM_MXSFB
 	bool
+
+config MXS_HAVE_PLATFORM_MXS_SAIF
+	bool
+
+config MXS_HAVE_PLATFORM_RTC_STMP3XXX
+	bool

arch/arm/mach-mxs/devices/Makefile

@@ -8,3 +8,5 @@ obj-$(CONFIG_MXS_HAVE_PLATFORM_MXS_MMC) += platform-mxs-mmc.o
 obj-$(CONFIG_MXS_HAVE_PLATFORM_MXS_PWM) += platform-mxs-pwm.o
 obj-y += platform-gpio-mxs.o
 obj-$(CONFIG_MXS_HAVE_PLATFORM_MXSFB) += platform-mxsfb.o
+obj-$(CONFIG_MXS_HAVE_PLATFORM_MXS_SAIF) += platform-mxs-saif.o
+obj-$(CONFIG_MXS_HAVE_PLATFORM_RTC_STMP3XXX) += platform-rtc-stmp3xxx.o

arch/arm/mach-mxs/devices/platform-mxs-saif.c

@@ -0,0 +1,60 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include <linux/compiler.h>
+#include <linux/err.h>
+#include <linux/init.h>
+
+#include <mach/mx23.h>
+#include <mach/mx28.h>
+#include <mach/devices-common.h>
+
+#define mxs_saif_data_entry_single(soc, _id)				\
+	{								\
+		.id = _id,						\
+		.iobase = soc ## _SAIF ## _id ## _BASE_ADDR,		\
+		.irq = soc ## _INT_SAIF ## _id,				\
+		.dma = soc ## _DMA_SAIF ## _id,				\
+		.dmairq = soc ## _INT_SAIF ## _id ##_DMA,		\
+	}
+
+#define mxs_saif_data_entry(soc, _id)					\
+	[_id] = mxs_saif_data_entry_single(soc, _id)
+
+#ifdef CONFIG_SOC_IMX28
+const struct mxs_saif_data mx28_saif_data[] __initconst = {
+	mxs_saif_data_entry(MX28, 0),
+	mxs_saif_data_entry(MX28, 1),
+};
+#endif
+
+struct platform_device *__init mxs_add_saif(const struct mxs_saif_data *data)
+{
+	struct resource res[] = {
+		{
+			.start = data->iobase,
+			.end = data->iobase + SZ_4K - 1,
+			.flags = IORESOURCE_MEM,
+		}, {
+			.start = data->irq,
+			.end = data->irq,
+			.flags = IORESOURCE_IRQ,
+		}, {
+			.start = data->dma,
+			.end = data->dma,
+			.flags = IORESOURCE_DMA,
+		}, {
+			.start = data->dmairq,
+			.end = data->dmairq,
+			.flags = IORESOURCE_IRQ,
+		},
+
+	};
+
+	return mxs_add_platform_device("mxs-saif", data->id, res,
+					ARRAY_SIZE(res), NULL, 0);
+}

arch/arm/mach-mxs/devices/platform-rtc-stmp3xxx.c

@@ -0,0 +1,51 @@
+/*
+ * Copyright (C) 2011 Pengutronix, Wolfram Sang <w.sang@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include <asm/sizes.h>
+#include <mach/mx23.h>
+#include <mach/mx28.h>
+#include <mach/devices-common.h>
+
+#ifdef CONFIG_SOC_IMX23
+struct platform_device *__init mx23_add_rtc_stmp3xxx(void)
+{
+	struct resource res[] = {
+		{
+			.start = MX23_RTC_BASE_ADDR,
+			.end = MX23_RTC_BASE_ADDR + SZ_8K - 1,
+			.flags = IORESOURCE_MEM,
+		}, {
+			.start = MX23_INT_RTC_ALARM,
+			.end = MX23_INT_RTC_ALARM,
+			.flags = IORESOURCE_IRQ,
+		},
+	};
+
+	return mxs_add_platform_device("stmp3xxx-rtc", 0, res, ARRAY_SIZE(res),
+					NULL, 0);
+}
+#endif /* CONFIG_SOC_IMX23 */
+
+#ifdef CONFIG_SOC_IMX28
+struct platform_device *__init mx28_add_rtc_stmp3xxx(void)
+{
+	struct resource res[] = {
+		{
+			.start = MX28_RTC_BASE_ADDR,
+			.end = MX28_RTC_BASE_ADDR + SZ_8K - 1,
+			.flags = IORESOURCE_MEM,
+		}, {
+			.start = MX28_INT_RTC_ALARM,
+			.end = MX28_INT_RTC_ALARM,
+			.flags = IORESOURCE_IRQ,
+		},
+	};
+
+	return mxs_add_platform_device("stmp3xxx-rtc", 0, res, ARRAY_SIZE(res),
+					NULL, 0);
+}
+#endif /* CONFIG_SOC_IMX28 */

arch/arm/mach-mxs/include/mach/devices-common.h

@@ -92,3 +92,15 @@ struct platform_device *__init mxs_add_mxs_mmc(
 /* pwm */
 struct platform_device *__init mxs_add_mxs_pwm(
 		resource_size_t iobase, int id);
+
+/* saif */
+struct mxs_saif_data {
+	int id;
+	resource_size_t iobase;
+	resource_size_t irq;
+	resource_size_t dma;
+	resource_size_t dmairq;
+};
+
+struct platform_device *__init mxs_add_saif(
+		const struct mxs_saif_data *data);

arch/arm/mach-mxs/include/mach/gpio.h

@@ -22,14 +22,10 @@
 
 #include <asm-generic/gpio.h>
 
-#define MXS_GPIO_NR(bank, nr)	((bank) * 32 + (nr))
-
 /* use gpiolib dispatchers */
 #define gpio_get_value		__gpio_get_value
 #define gpio_set_value		__gpio_set_value
 #define gpio_cansleep		__gpio_cansleep
 #define gpio_to_irq		__gpio_to_irq
 
-#define irq_to_gpio(irq)	((irq) - MXS_GPIO_IRQ_START)
-
 #endif /* __MACH_MXS_GPIO_H__ */

arch/arm/mach-mxs/include/mach/mxs.h

@@ -33,6 +33,7 @@
 		0)
 #define cpu_is_mx28()		(					\
 		machine_is_mx28evk() ||					\
+		machine_is_m28evk() ||					\
 		machine_is_tx28() ||					\
 		0)
 
@@ -86,6 +87,8 @@
 	.type = _type,							\
 }
 
+#define MXS_GPIO_NR(bank, nr)	((bank) * 32 + (nr))
+
 #define MXS_SET_ADDR		0x4
 #define MXS_CLR_ADDR		0x8
 #define MXS_TOG_ADDR		0xc

arch/arm/mach-mxs/include/mach/uncompress.h

@@ -63,6 +63,7 @@ static inline void __arch_decomp_setup(unsigned long arch_id)
 		mxs_duart_base = MX23_DUART_BASE_ADDR;
 		break;
 	case MACH_TYPE_MX28EVK:
+	case MACH_TYPE_M28EVK:
 	case MACH_TYPE_TX28:
 		mxs_duart_base = MX28_DUART_BASE_ADDR;
 		break;

arch/arm/mach-mxs/mach-m28evk.c

@@ -0,0 +1,366 @@
+/*
+ * Copyright (C) 2011
+ * Stefano Babic, DENX Software Engineering, <sbabic@denx.de>
+ *
+ * based on: mach-mx28_evk.c
+ * Copyright 2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/leds.h>
+#include <linux/irq.h>
+#include <linux/clk.h>
+#include <linux/i2c.h>
+#include <linux/i2c/at24.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+
+#include <mach/common.h>
+#include <mach/iomux-mx28.h>
+
+#include "devices-mx28.h"
+
+#define M28EVK_GPIO_USERLED1	MXS_GPIO_NR(3, 16)
+#define M28EVK_GPIO_USERLED2	MXS_GPIO_NR(3, 17)
+
+#define MX28EVK_BL_ENABLE	MXS_GPIO_NR(3, 18)
+#define M28EVK_LCD_ENABLE	MXS_GPIO_NR(3, 28)
+
+#define MX28EVK_MMC0_WRITE_PROTECT	MXS_GPIO_NR(2, 12)
+#define MX28EVK_MMC1_WRITE_PROTECT	MXS_GPIO_NR(0, 28)
+
+static const iomux_cfg_t m28evk_pads[] __initconst = {
+	/* duart */
+	MX28_PAD_AUART0_CTS__DUART_RX | MXS_PAD_CTRL,
+	MX28_PAD_AUART0_RTS__DUART_TX | MXS_PAD_CTRL,
+
+	/* auart0 */
+	MX28_PAD_AUART0_RX__AUART0_RX | MXS_PAD_CTRL,
+	MX28_PAD_AUART0_TX__AUART0_TX | MXS_PAD_CTRL,
+
+	/* auart3 */
+	MX28_PAD_AUART3_RX__AUART3_RX | MXS_PAD_CTRL,
+	MX28_PAD_AUART3_TX__AUART3_TX | MXS_PAD_CTRL,
+	MX28_PAD_AUART3_CTS__AUART3_CTS | MXS_PAD_CTRL,
+	MX28_PAD_AUART3_RTS__AUART3_RTS | MXS_PAD_CTRL,
+
+#define MXS_PAD_FEC	(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP)
+	/* fec0 */
+	MX28_PAD_ENET0_MDC__ENET0_MDC | MXS_PAD_FEC,
+	MX28_PAD_ENET0_MDIO__ENET0_MDIO | MXS_PAD_FEC,
+	MX28_PAD_ENET0_RX_EN__ENET0_RX_EN | MXS_PAD_FEC,
+	MX28_PAD_ENET0_RXD0__ENET0_RXD0 | MXS_PAD_FEC,
+	MX28_PAD_ENET0_RXD1__ENET0_RXD1 | MXS_PAD_FEC,
+	MX28_PAD_ENET0_TX_EN__ENET0_TX_EN | MXS_PAD_FEC,
+	MX28_PAD_ENET0_TXD0__ENET0_TXD0 | MXS_PAD_FEC,
+	MX28_PAD_ENET0_TXD1__ENET0_TXD1 | MXS_PAD_FEC,
+	MX28_PAD_ENET_CLK__CLKCTRL_ENET | MXS_PAD_FEC,
+	/* fec1 */
+	MX28_PAD_ENET0_CRS__ENET1_RX_EN | MXS_PAD_FEC,
+	MX28_PAD_ENET0_RXD2__ENET1_RXD0 | MXS_PAD_FEC,
+	MX28_PAD_ENET0_RXD3__ENET1_RXD1 | MXS_PAD_FEC,
+	MX28_PAD_ENET0_COL__ENET1_TX_EN | MXS_PAD_FEC,
+	MX28_PAD_ENET0_TXD2__ENET1_TXD0 | MXS_PAD_FEC,
+	MX28_PAD_ENET0_TXD3__ENET1_TXD1 | MXS_PAD_FEC,
+
+	/* flexcan0 */
+	MX28_PAD_GPMI_RDY2__CAN0_TX,
+	MX28_PAD_GPMI_RDY3__CAN0_RX,
+
+	/* flexcan1 */
+	MX28_PAD_GPMI_CE2N__CAN1_TX,
+	MX28_PAD_GPMI_CE3N__CAN1_RX,
+
+	/* I2C */
+	MX28_PAD_I2C0_SCL__I2C0_SCL,
+	MX28_PAD_I2C0_SDA__I2C0_SDA,
+
+	/* mxsfb (lcdif) */
+	MX28_PAD_LCD_D00__LCD_D0 | MXS_PAD_CTRL,
+	MX28_PAD_LCD_D01__LCD_D1 | MXS_PAD_CTRL,
+	MX28_PAD_LCD_D02__LCD_D2 | MXS_PAD_CTRL,
+	MX28_PAD_LCD_D03__LCD_D3 | MXS_PAD_CTRL,
+	MX28_PAD_LCD_D04__LCD_D4 | MXS_PAD_CTRL,
+	MX28_PAD_LCD_D05__LCD_D5 | MXS_PAD_CTRL,
+	MX28_PAD_LCD_D06__LCD_D6 | MXS_PAD_CTRL,
+	MX28_PAD_LCD_D07__LCD_D7 | MXS_PAD_CTRL,
+	MX28_PAD_LCD_D08__LCD_D8 | MXS_PAD_CTRL,
+	MX28_PAD_LCD_D09__LCD_D9 | MXS_PAD_CTRL,
+	MX28_PAD_LCD_D10__LCD_D10 | MXS_PAD_CTRL,
+	MX28_PAD_LCD_D11__LCD_D11 | MXS_PAD_CTRL,
+	MX28_PAD_LCD_D12__LCD_D12 | MXS_PAD_CTRL,
+	MX28_PAD_LCD_D13__LCD_D13 | MXS_PAD_CTRL,
+	MX28_PAD_LCD_D14__LCD_D14 | MXS_PAD_CTRL,
+	MX28_PAD_LCD_D15__LCD_D15 | MXS_PAD_CTRL,
+	MX28_PAD_LCD_D16__LCD_D16 | MXS_PAD_CTRL,
+	MX28_PAD_LCD_D17__LCD_D17 | MXS_PAD_CTRL,
+	MX28_PAD_LCD_D18__LCD_D18 | MXS_PAD_CTRL,
+	MX28_PAD_LCD_D19__LCD_D19 | MXS_PAD_CTRL,
+	MX28_PAD_LCD_D20__LCD_D20 | MXS_PAD_CTRL,
+	MX28_PAD_LCD_D21__LCD_D21 | MXS_PAD_CTRL,
+	MX28_PAD_LCD_D22__LCD_D22 | MXS_PAD_CTRL,
+	MX28_PAD_LCD_D23__LCD_D23 | MXS_PAD_CTRL,
+
+	MX28_PAD_LCD_ENABLE__LCD_ENABLE	| MXS_PAD_CTRL,
+	MX28_PAD_LCD_DOTCLK__LCD_DOTCLK | MXS_PAD_CTRL,
+
+	/* mmc0 */
+	MX28_PAD_SSP0_DATA0__SSP0_D0 |
+		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+	MX28_PAD_SSP0_DATA1__SSP0_D1 |
+		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+	MX28_PAD_SSP0_DATA2__SSP0_D2 |
+		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+	MX28_PAD_SSP0_DATA3__SSP0_D3 |
+		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+	MX28_PAD_SSP0_DATA4__SSP0_D4 |
+		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+	MX28_PAD_SSP0_DATA5__SSP0_D5 |
+		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+	MX28_PAD_SSP0_DATA6__SSP0_D6 |
+		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+	MX28_PAD_SSP0_DATA7__SSP0_D7 |
+		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+	MX28_PAD_SSP0_CMD__SSP0_CMD |
+		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+	MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT |
+		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
+	MX28_PAD_SSP0_SCK__SSP0_SCK |
+		(MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
+
+	/* mmc1 */
+	MX28_PAD_GPMI_D00__SSP1_D0 |
+		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+	MX28_PAD_GPMI_D01__SSP1_D1 |
+		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+	MX28_PAD_GPMI_D02__SSP1_D2 |
+		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+	MX28_PAD_GPMI_D03__SSP1_D3 |
+		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+	MX28_PAD_GPMI_D04__SSP1_D4 |
+		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+	MX28_PAD_GPMI_D05__SSP1_D5 |
+		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+	MX28_PAD_GPMI_D06__SSP1_D6 |
+		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+	MX28_PAD_GPMI_D07__SSP1_D7 |
+		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+	MX28_PAD_GPMI_RDY1__SSP1_CMD |
+		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+	MX28_PAD_GPMI_RDY0__SSP1_CARD_DETECT |
+		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
+	MX28_PAD_GPMI_WRN__SSP1_SCK |
+		(MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
+	/* write protect */
+	MX28_PAD_GPMI_RESETN__GPIO_0_28 |
+		(MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
+	/* slot power enable */
+	MX28_PAD_PWM4__GPIO_3_29 |
+		(MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
+
+	/* led */
+	MX28_PAD_PWM0__GPIO_3_16 | MXS_PAD_CTRL,
+	MX28_PAD_PWM1__GPIO_3_17 | MXS_PAD_CTRL,
+
+	/* nand */
+	MX28_PAD_GPMI_D00__GPMI_D0 |
+		(MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL),
+	MX28_PAD_GPMI_D01__GPMI_D1 |
+		(MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL),
+	MX28_PAD_GPMI_D02__GPMI_D2 |
+		(MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL),
+	MX28_PAD_GPMI_D03__GPMI_D3 |
+		(MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL),
+	MX28_PAD_GPMI_D04__GPMI_D4 |
+		(MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL),
+	MX28_PAD_GPMI_D05__GPMI_D5 |
+		(MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL),
+	MX28_PAD_GPMI_D06__GPMI_D6 |
+		(MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL),
+	MX28_PAD_GPMI_D07__GPMI_D7 |
+		(MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL),
+	MX28_PAD_GPMI_CE0N__GPMI_CE0N |
+		(MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL),
+	MX28_PAD_GPMI_RDY0__GPMI_READY0 |
+		(MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL),
+	MX28_PAD_GPMI_RDN__GPMI_RDN |
+		(MXS_PAD_12MA | MXS_PAD_1V8 | MXS_PAD_PULLUP),
+	MX28_PAD_GPMI_WRN__GPMI_WRN |
+		(MXS_PAD_12MA | MXS_PAD_1V8 | MXS_PAD_PULLUP),
+	MX28_PAD_GPMI_ALE__GPMI_ALE |
+		(MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_PULLUP),
+	MX28_PAD_GPMI_CLE__GPMI_CLE |
+		(MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_PULLUP),
+	MX28_PAD_GPMI_RESETN__GPMI_RESETN |
+		(MXS_PAD_12MA | MXS_PAD_1V8 | MXS_PAD_PULLUP),
+
+	/* Backlight */
+	MX28_PAD_PWM3__GPIO_3_28 | MXS_PAD_CTRL,
+};
+
+/* led */
+static const struct gpio_led m28evk_leds[] __initconst = {
+	{
+		.name = "user-led1",
+		.default_trigger = "heartbeat",
+		.gpio = M28EVK_GPIO_USERLED1,
+	},
+	{
+		.name = "user-led2",
+		.default_trigger = "heartbeat",
+		.gpio = M28EVK_GPIO_USERLED2,
+	},
+};
+
+static const struct gpio_led_platform_data m28evk_led_data __initconst = {
+	.leds = m28evk_leds,
+	.num_leds = ARRAY_SIZE(m28evk_leds),
+};
+
+static struct fec_platform_data mx28_fec_pdata[] __initdata = {
+	{
+		/* fec0 */
+		.phy = PHY_INTERFACE_MODE_RMII,
+	}, {
+		/* fec1 */
+		.phy = PHY_INTERFACE_MODE_RMII,
+	},
+};
+
+static int __init m28evk_fec_get_mac(void)
+{
+	int i;
+	u32 val;
+	const u32 *ocotp = mxs_get_ocotp();
+
+	if (!ocotp) {
+		pr_err("%s: timeout when reading fec mac from OCOTP\n",
+			__func__);
+		return -ETIMEDOUT;
+	}
+
+	/*
+	 * OCOTP only stores the last 4 octets for each mac address,
+	 * so hard-code DENX OUI (C0:E5:4E) here.
+	 */
+	for (i = 0; i < 2; i++) {
+		val = ocotp[i * 4];
+		mx28_fec_pdata[i].mac[0] = 0xC0;
+		mx28_fec_pdata[i].mac[1] = 0xE5;
+		mx28_fec_pdata[i].mac[2] = 0x4E;
+		mx28_fec_pdata[i].mac[3] = (val >> 16) & 0xff;
+		mx28_fec_pdata[i].mac[4] = (val >> 8) & 0xff;
+		mx28_fec_pdata[i].mac[5] = (val >> 0) & 0xff;
+	}
+
+	return 0;
+}
+
+/* mxsfb (lcdif) */
+static struct fb_videomode m28evk_video_modes[] = {
+	{
+		.name		= "Ampire AM-800480R2TMQW-T01H",
+		.refresh	= 60,
+		.xres		= 800,
+		.yres		= 480,
+		.pixclock	= 30066, /* picosecond (33.26 MHz) */
+		.left_margin	= 0,
+		.right_margin	= 256,
+		.upper_margin	= 0,
+		.lower_margin	= 45,
+		.hsync_len	= 1,
+		.vsync_len	= 1,
+		.sync		= FB_SYNC_DATA_ENABLE_HIGH_ACT,
+	},
+};
+
+static const struct mxsfb_platform_data m28evk_mxsfb_pdata __initconst = {
+	.mode_list	= m28evk_video_modes,
+	.mode_count	= ARRAY_SIZE(m28evk_video_modes),
+	.default_bpp	= 16,
+	.ld_intf_width	= STMLCDIF_18BIT,
+};
+
+static struct at24_platform_data m28evk_eeprom = {
+	.byte_len = 16384,
+	.page_size = 32,
+	.flags = AT24_FLAG_ADDR16,
+};
+
+static struct i2c_board_info m28_stk5v3_i2c_boardinfo[] __initdata = {
+	{
+		I2C_BOARD_INFO("at24", 0x51),	/* E0=1, E1=0, E2=0 */
+		.platform_data = &m28evk_eeprom,
+	},
+};
+
+static struct mxs_mmc_platform_data m28evk_mmc_pdata[] __initdata = {
+	{
+		/* mmc0 */
+		.wp_gpio = MX28EVK_MMC0_WRITE_PROTECT,
+		.flags = SLOTF_8_BIT_CAPABLE,
+	}, {
+		/* mmc1 */
+		.wp_gpio = MX28EVK_MMC1_WRITE_PROTECT,
+		.flags = SLOTF_8_BIT_CAPABLE,
+	},
+};
+
+static void __init m28evk_init(void)
+{
+	mxs_iomux_setup_multiple_pads(m28evk_pads, ARRAY_SIZE(m28evk_pads));
+
+	mx28_add_duart();
+	mx28_add_auart0();
+	mx28_add_auart3();
+
+	if (!m28evk_fec_get_mac()) {
+		mx28_add_fec(0, &mx28_fec_pdata[0]);
+		mx28_add_fec(1, &mx28_fec_pdata[1]);
+	}
+
+	mx28_add_flexcan(0, NULL);
+	mx28_add_flexcan(1, NULL);
+
+	mx28_add_mxsfb(&m28evk_mxsfb_pdata);
+
+	mx28_add_mxs_mmc(0, &m28evk_mmc_pdata[0]);
+	mx28_add_mxs_mmc(1, &m28evk_mmc_pdata[1]);
+
+	gpio_led_register_device(0, &m28evk_led_data);
+
+	/* I2C */
+	mx28_add_mxs_i2c(0);
+	i2c_register_board_info(0, m28_stk5v3_i2c_boardinfo,
+			ARRAY_SIZE(m28_stk5v3_i2c_boardinfo));
+}
+
+static void __init m28evk_timer_init(void)
+{
+	mx28_clocks_init();
+}
+
+static struct sys_timer m28evk_timer = {
+	.init	= m28evk_timer_init,
+};
+
+MACHINE_START(M28EVK, "DENX M28 EVK")
+	.map_io		= mx28_map_io,
+	.init_irq	= mx28_init_irq,
+	.init_machine	= m28evk_init,
+	.timer		= &m28evk_timer,
+MACHINE_END

arch/arm/mach-mxs/mach-mx23evk.c

@@ -15,7 +15,6 @@
 #include <linux/delay.h>
 #include <linux/platform_device.h>
 #include <linux/gpio.h>
-#include <linux/irq.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -167,6 +166,7 @@ static void __init mx23evk_init(void)
 		gpio_set_value(MX23EVK_BL_ENABLE, 1);
 
 	mx23_add_mxsfb(&mx23evk_mxsfb_pdata);
+	mx23_add_rtc_stmp3xxx();
 }
 
 static void __init mx23evk_timer_init(void)

arch/arm/mach-mxs/mach-mx28evk.c

@@ -16,8 +16,10 @@
 #include <linux/platform_device.h>
 #include <linux/gpio.h>
 #include <linux/leds.h>
-#include <linux/irq.h>
 #include <linux/clk.h>
+#include <linux/i2c.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/fixed.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -183,6 +185,24 @@ static const iomux_cfg_t mx28evk_pads[] __initconst = {
 
 	/* led */
 	MX28_PAD_AUART1_TX__GPIO_3_5 | MXS_PAD_CTRL,
+
+	/* I2C */
+	MX28_PAD_I2C0_SCL__I2C0_SCL |
+		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+	MX28_PAD_I2C0_SDA__I2C0_SDA |
+		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+
+	/* saif0 & saif1 */
+	MX28_PAD_SAIF0_MCLK__SAIF0_MCLK |
+		(MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+	MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK |
+		(MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+	MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK |
+		(MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+	MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0 |
+		(MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+	MX28_PAD_SAIF1_SDATA0__SAIF1_SDATA0 |
+		(MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
 };
 
 /* led */
@@ -352,6 +372,55 @@ static struct mxs_mmc_platform_data mx28evk_mmc_pdata[] __initdata = {
 	},
 };
 
+static struct i2c_board_info mxs_i2c0_board_info[] __initdata = {
+	{
+		I2C_BOARD_INFO("sgtl5000", 0x0a),
+	},
+};
+
+#if defined(CONFIG_REGULATOR_FIXED_VOLTAGE) || defined(CONFIG_REGULATOR_FIXED_VOLTAGE_MODULE)
+static struct regulator_consumer_supply mx28evk_audio_consumer_supplies[] = {
+	REGULATOR_SUPPLY("VDDA", "0-000a"),
+	REGULATOR_SUPPLY("VDDIO", "0-000a"),
+};
+
+static struct regulator_init_data mx28evk_vdd_reg_init_data = {
+	.constraints	= {
+		.name	= "3V3",
+		.always_on = 1,
+	},
+	.consumer_supplies = mx28evk_audio_consumer_supplies,
+	.num_consumer_supplies = ARRAY_SIZE(mx28evk_audio_consumer_supplies),
+};
+
+static struct fixed_voltage_config mx28evk_vdd_pdata = {
+	.supply_name	= "board-3V3",
+	.microvolts	= 3300000,
+	.gpio		= -EINVAL,
+	.enabled_at_boot = 1,
+	.init_data	= &mx28evk_vdd_reg_init_data,
+};
+static struct platform_device mx28evk_voltage_regulator = {
+	.name		= "reg-fixed-voltage",
+	.id		= -1,
+	.num_resources	= 0,
+	.dev		= {
+		.platform_data	= &mx28evk_vdd_pdata,
+	},
+};
+static void __init mx28evk_add_regulators(void)
+{
+	platform_device_register(&mx28evk_voltage_regulator);
+}
+#else
+static void __init mx28evk_add_regulators(void) {}
+#endif
+
+static struct gpio mx28evk_lcd_gpios[] = {
+	{ MX28EVK_LCD_ENABLE, GPIOF_OUT_INIT_HIGH, "lcd-enable" },
+	{ MX28EVK_BL_ENABLE, GPIOF_OUT_INIT_HIGH, "bl-enable" },
+};
+
 static void __init mx28evk_init(void)
 {
 	int ret;
@@ -378,19 +447,24 @@ static void __init mx28evk_init(void)
 		mx28_add_flexcan(1, &mx28evk_flexcan_pdata[1]);
 	}
 
-	ret = gpio_request_one(MX28EVK_LCD_ENABLE, GPIOF_DIR_OUT, "lcd-enable");
+	ret = gpio_request_array(mx28evk_lcd_gpios,
+				 ARRAY_SIZE(mx28evk_lcd_gpios));
 	if (ret)
-		pr_warn("failed to request gpio lcd-enable: %d\n", ret);
+		pr_warn("failed to request gpio pins for lcd: %d\n", ret);
 	else
-		gpio_set_value(MX28EVK_LCD_ENABLE, 1);
+		mx28_add_mxsfb(&mx28evk_mxsfb_pdata);
 
-	ret = gpio_request_one(MX28EVK_BL_ENABLE, GPIOF_DIR_OUT, "bl-enable");
-	if (ret)
-		pr_warn("failed to request gpio bl-enable: %d\n", ret);
-	else
-		gpio_set_value(MX28EVK_BL_ENABLE, 1);
+	mx28_add_saif(0);
+	mx28_add_saif(1);
+
+	mx28_add_mxs_i2c(0);
+	i2c_register_board_info(0, mxs_i2c0_board_info,
+				ARRAY_SIZE(mxs_i2c0_board_info));
 
-	mx28_add_mxsfb(&mx28evk_mxsfb_pdata);
+	mx28evk_add_regulators();
+
+	mxs_add_platform_device("mxs-sgtl5000", 0, NULL, 0,
+			NULL, 0);
 
 	/* power on mmc slot by writing 0 to the gpio */
 	ret = gpio_request_one(MX28EVK_MMC0_SLOT_POWER, GPIOF_OUT_INIT_LOW,
@@ -403,7 +477,11 @@ static void __init mx28evk_init(void)
 			       "mmc1-slot-power");
 	if (ret)
 		pr_warn("failed to request gpio mmc1-slot-power: %d\n", ret);
+	else
+		mx28_add_mxs_mmc(1, &mx28evk_mmc_pdata[1]);
+
 	mx28_add_mxs_mmc(1, &mx28evk_mmc_pdata[1]);
+	mx28_add_rtc_stmp3xxx();
 
 	gpio_led_register_device(0, &mx28evk_led_data);
 }

arch/arm/mach-mxs/mach-stmp378x_devb.c

@@ -19,7 +19,6 @@
 
 #include <linux/platform_device.h>
 #include <linux/gpio.h>
-#include <linux/irq.h>
 #include <linux/spi/spi.h>
 
 #include <asm/mach-types.h>
@@ -91,6 +90,7 @@ static void __init stmp378x_dvb_init(void)
 
 	mx23_add_duart();
 	mx23_add_auart0();
+	mx23_add_rtc_stmp3xxx();
 
 	/* power on mmc slot */
 	ret = gpio_request_one(STMP378X_DEVB_MMC0_SLOT_POWER,

arch/arm/mach-mxs/mach-tx28.c

@@ -161,6 +161,7 @@ static void __init tx28_stk5v3_init(void)
 	i2c_register_board_info(0, tx28_stk5v3_i2c_boardinfo,
 			ARRAY_SIZE(tx28_stk5v3_i2c_boardinfo));
 	mx28_add_mxs_mmc(0, &tx28_mmc0_pdata);
+	mx28_add_rtc_stmp3xxx();
 }
 
 static void __init tx28_timer_init(void)

arch/arm/mach-mxs/mm-mx28.c

@@ -1,44 +0,0 @@
-/*
- * Copyright 2008-2010 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * The code contained herein is licensed under the GNU General Public
- * License.  You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- *
- * Create static mapping between physical to virtual memory.
- */
-
-#include <linux/mm.h>
-#include <linux/init.h>
-
-#include <asm/mach/map.h>
-
-#include <mach/mx28.h>
-#include <mach/common.h>
-#include <mach/iomux.h>
-
-/*
- * Define the MX28 memory map.
- */
-static struct map_desc mx28_io_desc[] __initdata = {
-	mxs_map_entry(MX28, OCRAM, MT_DEVICE),
-	mxs_map_entry(MX28, IO, MT_DEVICE),
-};
-
-/*
- * This function initializes the memory map. It is called during the
- * system startup to create static physical to virtual memory mappings
- * for the IO modules.
- */
-void __init mx28_map_io(void)
-{
-	iotable_init(mx28_io_desc, ARRAY_SIZE(mx28_io_desc));
-}
-
-void __init mx28_init_irq(void)
-{
-	icoll_init_irq();
-}