|
@@ -7,12 +7,13 @@
|
|
|
* This program is free software; you can redistribute it and/or modify
|
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
|
* published by the Free Software Foundation.
|
|
|
-*/
|
|
|
+ */
|
|
|
|
|
|
/dts-v1/;
|
|
|
-#include "exynos5250.dtsi"
|
|
|
+#include <dt-bindings/gpio/gpio.h>
|
|
|
#include <dt-bindings/interrupt-controller/irq.h>
|
|
|
#include <dt-bindings/input/input.h>
|
|
|
+#include "exynos5250.dtsi"
|
|
|
|
|
|
/ {
|
|
|
model = "Insignal Arndale evaluation board based on EXYNOS5250";
|
|
@@ -26,465 +27,52 @@
|
|
|
bootargs = "console=ttySAC2,115200";
|
|
|
};
|
|
|
|
|
|
- rtc@101E0000 {
|
|
|
- status = "okay";
|
|
|
- };
|
|
|
-
|
|
|
- codec@11000000 {
|
|
|
- samsung,mfc-r = <0x43000000 0x800000>;
|
|
|
- samsung,mfc-l = <0x51000000 0x800000>;
|
|
|
- };
|
|
|
-
|
|
|
- i2c@12C60000 {
|
|
|
- samsung,i2c-sda-delay = <100>;
|
|
|
- samsung,i2c-max-bus-freq = <20000>;
|
|
|
- samsung,i2c-slave-addr = <0x66>;
|
|
|
- status = "okay";
|
|
|
-
|
|
|
- s5m8767_pmic@66 {
|
|
|
- compatible = "samsung,s5m8767-pmic";
|
|
|
- reg = <0x66>;
|
|
|
- interrupt-parent = <&gpx3>;
|
|
|
- interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
|
|
|
-
|
|
|
- vinb1-supply = <&main_dc_reg>;
|
|
|
- vinb2-supply = <&main_dc_reg>;
|
|
|
- vinb3-supply = <&main_dc_reg>;
|
|
|
- vinb4-supply = <&main_dc_reg>;
|
|
|
- vinb5-supply = <&main_dc_reg>;
|
|
|
- vinb6-supply = <&main_dc_reg>;
|
|
|
- vinb7-supply = <&main_dc_reg>;
|
|
|
- vinb8-supply = <&main_dc_reg>;
|
|
|
- vinb9-supply = <&main_dc_reg>;
|
|
|
-
|
|
|
- vinl1-supply = <&buck7_reg>;
|
|
|
- vinl2-supply = <&buck7_reg>;
|
|
|
- vinl3-supply = <&buck7_reg>;
|
|
|
- vinl4-supply = <&main_dc_reg>;
|
|
|
- vinl5-supply = <&main_dc_reg>;
|
|
|
- vinl6-supply = <&main_dc_reg>;
|
|
|
- vinl7-supply = <&main_dc_reg>;
|
|
|
- vinl8-supply = <&buck8_reg>;
|
|
|
- vinl9-supply = <&buck8_reg>;
|
|
|
-
|
|
|
- s5m8767,pmic-buck2-dvs-voltage = <1300000>;
|
|
|
- s5m8767,pmic-buck3-dvs-voltage = <1100000>;
|
|
|
- s5m8767,pmic-buck4-dvs-voltage = <1200000>;
|
|
|
- s5m8767,pmic-buck-dvs-gpios = <&gpd1 0 0>,
|
|
|
- <&gpd1 1 0>,
|
|
|
- <&gpd1 2 0>;
|
|
|
- s5m8767,pmic-buck-ds-gpios = <&gpx2 3 0>,
|
|
|
- <&gpx2 4 0>,
|
|
|
- <&gpx2 5 0>;
|
|
|
- regulators {
|
|
|
- ldo1_reg: LDO1 {
|
|
|
- regulator-name = "VDD_ALIVE_1.0V";
|
|
|
- regulator-min-microvolt = <1100000>;
|
|
|
- regulator-max-microvolt = <1100000>;
|
|
|
- regulator-always-on;
|
|
|
- regulator-boot-on;
|
|
|
- op_mode = <1>;
|
|
|
- };
|
|
|
-
|
|
|
- ldo2_reg: LDO2 {
|
|
|
- regulator-name = "VDD_28IO_DP_1.35V";
|
|
|
- regulator-min-microvolt = <1200000>;
|
|
|
- regulator-max-microvolt = <1200000>;
|
|
|
- regulator-always-on;
|
|
|
- regulator-boot-on;
|
|
|
- op_mode = <1>;
|
|
|
- };
|
|
|
-
|
|
|
- ldo3_reg: LDO3 {
|
|
|
- regulator-name = "VDD_COMMON1_1.8V";
|
|
|
- regulator-min-microvolt = <1800000>;
|
|
|
- regulator-max-microvolt = <1800000>;
|
|
|
- regulator-always-on;
|
|
|
- regulator-boot-on;
|
|
|
- op_mode = <1>;
|
|
|
- };
|
|
|
-
|
|
|
- ldo4_reg: LDO4 {
|
|
|
- regulator-name = "VDD_IOPERI_1.8V";
|
|
|
- regulator-min-microvolt = <1800000>;
|
|
|
- regulator-max-microvolt = <1800000>;
|
|
|
- regulator-always-on;
|
|
|
- op_mode = <1>;
|
|
|
- };
|
|
|
-
|
|
|
- ldo5_reg: LDO5 {
|
|
|
- regulator-name = "VDD_EXT_1.8V";
|
|
|
- regulator-min-microvolt = <1800000>;
|
|
|
- regulator-max-microvolt = <1800000>;
|
|
|
- regulator-always-on;
|
|
|
- regulator-boot-on;
|
|
|
- op_mode = <1>;
|
|
|
- };
|
|
|
-
|
|
|
- ldo6_reg: LDO6 {
|
|
|
- regulator-name = "VDD_MPLL_1.1V";
|
|
|
- regulator-min-microvolt = <1100000>;
|
|
|
- regulator-max-microvolt = <1100000>;
|
|
|
- regulator-always-on;
|
|
|
- regulator-boot-on;
|
|
|
- op_mode = <1>;
|
|
|
- };
|
|
|
-
|
|
|
- ldo7_reg: LDO7 {
|
|
|
- regulator-name = "VDD_XPLL_1.1V";
|
|
|
- regulator-min-microvolt = <1100000>;
|
|
|
- regulator-max-microvolt = <1100000>;
|
|
|
- regulator-always-on;
|
|
|
- regulator-boot-on;
|
|
|
- op_mode = <1>;
|
|
|
- };
|
|
|
-
|
|
|
- ldo8_reg: LDO8 {
|
|
|
- regulator-name = "VDD_COMMON2_1.0V";
|
|
|
- regulator-min-microvolt = <1000000>;
|
|
|
- regulator-max-microvolt = <1000000>;
|
|
|
- regulator-always-on;
|
|
|
- regulator-boot-on;
|
|
|
- op_mode = <1>;
|
|
|
- };
|
|
|
-
|
|
|
- ldo9_reg: LDO9 {
|
|
|
- regulator-name = "VDD_33ON_3.0V";
|
|
|
- regulator-min-microvolt = <3000000>;
|
|
|
- regulator-max-microvolt = <3000000>;
|
|
|
- op_mode = <1>;
|
|
|
- };
|
|
|
-
|
|
|
- ldo10_reg: LDO10 {
|
|
|
- regulator-name = "VDD_COMMON3_1.8V";
|
|
|
- regulator-min-microvolt = <1800000>;
|
|
|
- regulator-max-microvolt = <1800000>;
|
|
|
- regulator-always-on;
|
|
|
- regulator-boot-on;
|
|
|
- op_mode = <1>;
|
|
|
- };
|
|
|
-
|
|
|
- ldo11_reg: LDO11 {
|
|
|
- regulator-name = "VDD_ABB2_1.8V";
|
|
|
- regulator-min-microvolt = <1800000>;
|
|
|
- regulator-max-microvolt = <1800000>;
|
|
|
- regulator-always-on;
|
|
|
- regulator-boot-on;
|
|
|
- op_mode = <1>;
|
|
|
- };
|
|
|
-
|
|
|
- ldo12_reg: LDO12 {
|
|
|
- regulator-name = "VDD_USB_3.0V";
|
|
|
- regulator-min-microvolt = <3000000>;
|
|
|
- regulator-max-microvolt = <3000000>;
|
|
|
- regulator-always-on;
|
|
|
- regulator-boot-on;
|
|
|
- op_mode = <1>;
|
|
|
- };
|
|
|
-
|
|
|
- ldo13_reg: LDO13 {
|
|
|
- regulator-name = "VDDQ_C2C_W_1.8V";
|
|
|
- regulator-min-microvolt = <1800000>;
|
|
|
- regulator-max-microvolt = <1800000>;
|
|
|
- regulator-always-on;
|
|
|
- regulator-boot-on;
|
|
|
- op_mode = <1>;
|
|
|
- };
|
|
|
-
|
|
|
- ldo14_reg: LDO14 {
|
|
|
- regulator-name = "VDD18_ABB0_3_1.8V";
|
|
|
- regulator-min-microvolt = <1800000>;
|
|
|
- regulator-max-microvolt = <1800000>;
|
|
|
- regulator-always-on;
|
|
|
- regulator-boot-on;
|
|
|
- op_mode = <1>;
|
|
|
- };
|
|
|
-
|
|
|
- ldo15_reg: LDO15 {
|
|
|
- regulator-name = "VDD10_COMMON4_1.0V";
|
|
|
- regulator-min-microvolt = <1000000>;
|
|
|
- regulator-max-microvolt = <1000000>;
|
|
|
- regulator-always-on;
|
|
|
- regulator-boot-on;
|
|
|
- op_mode = <1>;
|
|
|
- };
|
|
|
-
|
|
|
- ldo16_reg: LDO16 {
|
|
|
- regulator-name = "VDD18_HSIC_1.8V";
|
|
|
- regulator-min-microvolt = <1800000>;
|
|
|
- regulator-max-microvolt = <1800000>;
|
|
|
- regulator-always-on;
|
|
|
- regulator-boot-on;
|
|
|
- op_mode = <1>;
|
|
|
- };
|
|
|
-
|
|
|
- ldo17_reg: LDO17 {
|
|
|
- regulator-name = "VDDQ_MMC2_3_2.8V";
|
|
|
- regulator-min-microvolt = <2800000>;
|
|
|
- regulator-max-microvolt = <2800000>;
|
|
|
- regulator-always-on;
|
|
|
- regulator-boot-on;
|
|
|
- op_mode = <1>;
|
|
|
- };
|
|
|
-
|
|
|
- ldo18_reg: LDO18 {
|
|
|
- regulator-name = "VDD_33ON_2.8V";
|
|
|
- regulator-min-microvolt = <2800000>;
|
|
|
- regulator-max-microvolt = <2800000>;
|
|
|
- op_mode = <1>;
|
|
|
- };
|
|
|
-
|
|
|
- ldo22_reg: LDO22 {
|
|
|
- regulator-name = "EXT_33_OFF";
|
|
|
- regulator-min-microvolt = <3300000>;
|
|
|
- regulator-max-microvolt = <3300000>;
|
|
|
- op_mode = <1>;
|
|
|
- };
|
|
|
-
|
|
|
- ldo23_reg: LDO23 {
|
|
|
- regulator-name = "EXT_28_OFF";
|
|
|
- regulator-min-microvolt = <2800000>;
|
|
|
- regulator-max-microvolt = <2800000>;
|
|
|
- op_mode = <1>;
|
|
|
- };
|
|
|
-
|
|
|
- ldo25_reg: LDO25 {
|
|
|
- regulator-name = "PVDD_LDO25";
|
|
|
- regulator-min-microvolt = <1200000>;
|
|
|
- regulator-max-microvolt = <1200000>;
|
|
|
- op_mode = <1>;
|
|
|
- };
|
|
|
-
|
|
|
- ldo26_reg: LDO26 {
|
|
|
- regulator-name = "EXT_18_OFF";
|
|
|
- regulator-min-microvolt = <1800000>;
|
|
|
- regulator-max-microvolt = <1800000>;
|
|
|
- op_mode = <1>;
|
|
|
- };
|
|
|
-
|
|
|
- buck1_reg: BUCK1 {
|
|
|
- regulator-name = "vdd_mif";
|
|
|
- regulator-min-microvolt = <950000>;
|
|
|
- regulator-max-microvolt = <1200000>;
|
|
|
- regulator-always-on;
|
|
|
- regulator-boot-on;
|
|
|
- op_mode = <1>;
|
|
|
- };
|
|
|
-
|
|
|
- buck2_reg: BUCK2 {
|
|
|
- regulator-name = "vdd_arm";
|
|
|
- regulator-min-microvolt = <912500>;
|
|
|
- regulator-max-microvolt = <1300000>;
|
|
|
- regulator-always-on;
|
|
|
- regulator-boot-on;
|
|
|
- op_mode = <1>;
|
|
|
- };
|
|
|
-
|
|
|
- buck3_reg: BUCK3 {
|
|
|
- regulator-name = "vdd_int";
|
|
|
- regulator-min-microvolt = <900000>;
|
|
|
- regulator-max-microvolt = <1200000>;
|
|
|
- regulator-always-on;
|
|
|
- regulator-boot-on;
|
|
|
- op_mode = <1>;
|
|
|
- };
|
|
|
-
|
|
|
- buck4_reg: BUCK4 {
|
|
|
- regulator-name = "vdd_g3d";
|
|
|
- regulator-min-microvolt = <1000000>;
|
|
|
- regulator-max-microvolt = <1000000>;
|
|
|
- regulator-always-on;
|
|
|
- regulator-boot-on;
|
|
|
- op_mode = <1>;
|
|
|
- };
|
|
|
-
|
|
|
- buck5_reg: BUCK5 {
|
|
|
- regulator-name = "VDD_MEM_1.35V";
|
|
|
- regulator-min-microvolt = <750000>;
|
|
|
- regulator-max-microvolt = <1355000>;
|
|
|
- regulator-always-on;
|
|
|
- regulator-boot-on;
|
|
|
- op_mode = <1>;
|
|
|
- };
|
|
|
-
|
|
|
- buck7_reg: BUCK7 {
|
|
|
- regulator-name = "PVDD_BUCK7";
|
|
|
- regulator-always-on;
|
|
|
- op_mode = <1>;
|
|
|
- };
|
|
|
-
|
|
|
- buck8_reg: BUCK8 {
|
|
|
- regulator-name = "PVDD_BUCK8";
|
|
|
- regulator-always-on;
|
|
|
- op_mode = <1>;
|
|
|
- };
|
|
|
-
|
|
|
- buck9_reg: BUCK9 {
|
|
|
- regulator-name = "VDD_33_OFF_EXT1";
|
|
|
- regulator-min-microvolt = <750000>;
|
|
|
- regulator-max-microvolt = <3000000>;
|
|
|
- op_mode = <1>;
|
|
|
- };
|
|
|
- };
|
|
|
- };
|
|
|
- };
|
|
|
-
|
|
|
- i2c@12C80000 {
|
|
|
- status = "okay";
|
|
|
-
|
|
|
- samsung,i2c-sda-delay = <100>;
|
|
|
- samsung,i2c-max-bus-freq = <66000>;
|
|
|
- samsung,i2c-slave-addr = <0x50>;
|
|
|
-
|
|
|
- hdmiddc@50 {
|
|
|
- compatible = "samsung,exynos4210-hdmiddc";
|
|
|
- reg = <0x50>;
|
|
|
- };
|
|
|
- };
|
|
|
-
|
|
|
- i2c@12C90000 {
|
|
|
- status = "okay";
|
|
|
-
|
|
|
- wm1811a@1a {
|
|
|
-
|
|
|
- compatible = "wlf,wm1811";
|
|
|
- reg = <0x1a>;
|
|
|
-
|
|
|
- AVDD2-supply = <&main_dc_reg>;
|
|
|
- CPVDD-supply = <&main_dc_reg>;
|
|
|
- DBVDD1-supply = <&main_dc_reg>;
|
|
|
- DBVDD2-supply = <&main_dc_reg>;
|
|
|
- DBVDD3-supply = <&main_dc_reg>;
|
|
|
- LDO1VDD-supply = <&main_dc_reg>;
|
|
|
- SPKVDD1-supply = <&main_dc_reg>;
|
|
|
- SPKVDD2-supply = <&main_dc_reg>;
|
|
|
-
|
|
|
- wlf,ldo1ena = <&gpb0 0 0>;
|
|
|
- wlf,ldo2ena = <&gpb0 1 0>;
|
|
|
- };
|
|
|
- };
|
|
|
-
|
|
|
- i2c@12CE0000 {
|
|
|
- status = "okay";
|
|
|
-
|
|
|
- samsung,i2c-sda-delay = <100>;
|
|
|
- samsung,i2c-max-bus-freq = <66000>;
|
|
|
- samsung,i2c-slave-addr = <0x38>;
|
|
|
-
|
|
|
- hdmiphy@38 {
|
|
|
- compatible = "samsung,exynos4212-hdmiphy";
|
|
|
- reg = <0x38>;
|
|
|
- };
|
|
|
- };
|
|
|
-
|
|
|
- i2c@121D0000 {
|
|
|
- status = "okay";
|
|
|
- samsung,i2c-sda-delay = <100>;
|
|
|
- samsung,i2c-max-bus-freq = <40000>;
|
|
|
- samsung,i2c-slave-addr = <0x38>;
|
|
|
-
|
|
|
- sata_phy_i2c:sata-phy@38 {
|
|
|
- compatible = "samsung,exynos-sataphy-i2c";
|
|
|
- reg = <0x38>;
|
|
|
- };
|
|
|
- };
|
|
|
-
|
|
|
- sata@122F0000 {
|
|
|
- status = "okay";
|
|
|
- };
|
|
|
-
|
|
|
- sata-phy@12170000 {
|
|
|
- status = "okay";
|
|
|
- samsung,exynos-sataphy-i2c-phandle = <&sata_phy_i2c>;
|
|
|
- };
|
|
|
-
|
|
|
- mmc_0: mmc@12200000 {
|
|
|
- status = "okay";
|
|
|
- num-slots = <1>;
|
|
|
- broken-cd;
|
|
|
- card-detect-delay = <200>;
|
|
|
- samsung,dw-mshc-ciu-div = <3>;
|
|
|
- samsung,dw-mshc-sdr-timing = <2 3>;
|
|
|
- samsung,dw-mshc-ddr-timing = <1 2>;
|
|
|
- vmmc-supply = <&mmc_reg>;
|
|
|
- pinctrl-names = "default";
|
|
|
- pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>;
|
|
|
- bus-width = <8>;
|
|
|
- cap-mmc-highspeed;
|
|
|
- };
|
|
|
-
|
|
|
- mmc_2: mmc@12220000 {
|
|
|
- status = "okay";
|
|
|
- num-slots = <1>;
|
|
|
- card-detect-delay = <200>;
|
|
|
- samsung,dw-mshc-ciu-div = <3>;
|
|
|
- samsung,dw-mshc-sdr-timing = <2 3>;
|
|
|
- samsung,dw-mshc-ddr-timing = <1 2>;
|
|
|
- vmmc-supply = <&mmc_reg>;
|
|
|
- pinctrl-names = "default";
|
|
|
- pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
|
|
|
- bus-width = <4>;
|
|
|
- disable-wp;
|
|
|
- cap-sd-highspeed;
|
|
|
- };
|
|
|
-
|
|
|
- i2s0: i2s@03830000 {
|
|
|
- status = "okay";
|
|
|
- };
|
|
|
-
|
|
|
gpio_keys {
|
|
|
compatible = "gpio-keys";
|
|
|
|
|
|
menu {
|
|
|
label = "SW-TACT2";
|
|
|
- gpios = <&gpx1 4 1>;
|
|
|
+ gpios = <&gpx1 4 GPIO_ACTIVE_LOW>;
|
|
|
linux,code = <KEY_MENU>;
|
|
|
gpio-key,wakeup;
|
|
|
};
|
|
|
|
|
|
home {
|
|
|
label = "SW-TACT3";
|
|
|
- gpios = <&gpx1 5 1>;
|
|
|
+ gpios = <&gpx1 5 GPIO_ACTIVE_LOW>;
|
|
|
linux,code = <KEY_HOME>;
|
|
|
gpio-key,wakeup;
|
|
|
};
|
|
|
|
|
|
up {
|
|
|
label = "SW-TACT4";
|
|
|
- gpios = <&gpx1 6 1>;
|
|
|
+ gpios = <&gpx1 6 GPIO_ACTIVE_LOW>;
|
|
|
linux,code = <KEY_UP>;
|
|
|
gpio-key,wakeup;
|
|
|
};
|
|
|
|
|
|
down {
|
|
|
label = "SW-TACT5";
|
|
|
- gpios = <&gpx1 7 1>;
|
|
|
+ gpios = <&gpx1 7 GPIO_ACTIVE_LOW>;
|
|
|
linux,code = <KEY_DOWN>;
|
|
|
gpio-key,wakeup;
|
|
|
};
|
|
|
|
|
|
back {
|
|
|
label = "SW-TACT6";
|
|
|
- gpios = <&gpx2 0 1>;
|
|
|
+ gpios = <&gpx2 0 GPIO_ACTIVE_LOW>;
|
|
|
linux,code = <KEY_BACK>;
|
|
|
gpio-key,wakeup;
|
|
|
};
|
|
|
|
|
|
wakeup {
|
|
|
label = "SW-TACT7";
|
|
|
- gpios = <&gpx2 1 1>;
|
|
|
+ gpios = <&gpx2 1 GPIO_ACTIVE_LOW>;
|
|
|
linux,code = <KEY_WAKEUP>;
|
|
|
gpio-key,wakeup;
|
|
|
};
|
|
|
};
|
|
|
|
|
|
- hdmi {
|
|
|
- hpd-gpio = <&gpx3 7 2>;
|
|
|
- vdd_osc-supply = <&ldo10_reg>;
|
|
|
- vdd_pll-supply = <&ldo8_reg>;
|
|
|
- vdd-supply = <&ldo8_reg>;
|
|
|
- };
|
|
|
-
|
|
|
regulators {
|
|
|
compatible = "simple-bus";
|
|
|
#address-cells = <1>;
|
|
@@ -502,7 +90,7 @@
|
|
|
regulator-name = "VDD_33ON_2.8V";
|
|
|
regulator-min-microvolt = <2800000>;
|
|
|
regulator-max-microvolt = <2800000>;
|
|
|
- gpio = <&gpx1 1 1>;
|
|
|
+ gpio = <&gpx1 1 GPIO_ACTIVE_LOW>;
|
|
|
enable-active-high;
|
|
|
};
|
|
|
|
|
@@ -520,35 +108,6 @@
|
|
|
};
|
|
|
};
|
|
|
|
|
|
- dp-controller@145B0000 {
|
|
|
- samsung,color-space = <0>;
|
|
|
- samsung,dynamic-range = <0>;
|
|
|
- samsung,ycbcr-coeff = <0>;
|
|
|
- samsung,color-depth = <1>;
|
|
|
- samsung,link-rate = <0x0a>;
|
|
|
- samsung,lane-count = <4>;
|
|
|
- status = "okay";
|
|
|
- };
|
|
|
-
|
|
|
- fimd: fimd@14400000 {
|
|
|
- status = "okay";
|
|
|
- display-timings {
|
|
|
- native-mode = <&timing0>;
|
|
|
- timing0: timing@0 {
|
|
|
- /* 2560x1600 DP panel */
|
|
|
- clock-frequency = <50000>;
|
|
|
- hactive = <2560>;
|
|
|
- vactive = <1600>;
|
|
|
- hfront-porch = <48>;
|
|
|
- hback-porch = <80>;
|
|
|
- hsync-len = <32>;
|
|
|
- vback-porch = <16>;
|
|
|
- vfront-porch = <8>;
|
|
|
- vsync-len = <6>;
|
|
|
- };
|
|
|
- };
|
|
|
- };
|
|
|
-
|
|
|
usb_hub_bus {
|
|
|
compatible = "simple-bus";
|
|
|
#address-cells = <1>;
|
|
@@ -558,8 +117,452 @@
|
|
|
usb_hub: usb_hub {
|
|
|
compatible = "smsc,usb3503a";
|
|
|
|
|
|
- reset-gpios = <&gpx3 5 1>;
|
|
|
- connect-gpios = <&gpd1 7 1>;
|
|
|
+ reset-gpios = <&gpx3 5 GPIO_ACTIVE_LOW>;
|
|
|
+ connect-gpios = <&gpd1 7 GPIO_ACTIVE_LOW>;
|
|
|
+ };
|
|
|
+ };
|
|
|
+};
|
|
|
+
|
|
|
+&dp {
|
|
|
+ status = "okay";
|
|
|
+ samsung,color-space = <0>;
|
|
|
+ samsung,dynamic-range = <0>;
|
|
|
+ samsung,ycbcr-coeff = <0>;
|
|
|
+ samsung,color-depth = <1>;
|
|
|
+ samsung,link-rate = <0x0a>;
|
|
|
+ samsung,lane-count = <4>;
|
|
|
+};
|
|
|
+
|
|
|
+&fimd {
|
|
|
+ status = "okay";
|
|
|
+
|
|
|
+ display-timings {
|
|
|
+ native-mode = <&timing0>;
|
|
|
+
|
|
|
+ timing0: timing@0 {
|
|
|
+ /* 2560x1600 DP panel */
|
|
|
+ clock-frequency = <50000>;
|
|
|
+ hactive = <2560>;
|
|
|
+ vactive = <1600>;
|
|
|
+ hfront-porch = <48>;
|
|
|
+ hback-porch = <80>;
|
|
|
+ hsync-len = <32>;
|
|
|
+ vback-porch = <16>;
|
|
|
+ vfront-porch = <8>;
|
|
|
+ vsync-len = <6>;
|
|
|
+ };
|
|
|
+ };
|
|
|
+};
|
|
|
+
|
|
|
+&hdmi {
|
|
|
+ hpd-gpio = <&gpx3 7 2>;
|
|
|
+ vdd_osc-supply = <&ldo10_reg>;
|
|
|
+ vdd_pll-supply = <&ldo8_reg>;
|
|
|
+ vdd-supply = <&ldo8_reg>;
|
|
|
+};
|
|
|
+
|
|
|
+&i2c_0 {
|
|
|
+ status = "okay";
|
|
|
+ samsung,i2c-sda-delay = <100>;
|
|
|
+ samsung,i2c-max-bus-freq = <20000>;
|
|
|
+ samsung,i2c-slave-addr = <0x66>;
|
|
|
+
|
|
|
+ s5m8767_pmic@66 {
|
|
|
+ compatible = "samsung,s5m8767-pmic";
|
|
|
+ reg = <0x66>;
|
|
|
+ interrupt-parent = <&gpx3>;
|
|
|
+ interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
|
|
|
+
|
|
|
+ vinb1-supply = <&main_dc_reg>;
|
|
|
+ vinb2-supply = <&main_dc_reg>;
|
|
|
+ vinb3-supply = <&main_dc_reg>;
|
|
|
+ vinb4-supply = <&main_dc_reg>;
|
|
|
+ vinb5-supply = <&main_dc_reg>;
|
|
|
+ vinb6-supply = <&main_dc_reg>;
|
|
|
+ vinb7-supply = <&main_dc_reg>;
|
|
|
+ vinb8-supply = <&main_dc_reg>;
|
|
|
+ vinb9-supply = <&main_dc_reg>;
|
|
|
+
|
|
|
+ vinl1-supply = <&buck7_reg>;
|
|
|
+ vinl2-supply = <&buck7_reg>;
|
|
|
+ vinl3-supply = <&buck7_reg>;
|
|
|
+ vinl4-supply = <&main_dc_reg>;
|
|
|
+ vinl5-supply = <&main_dc_reg>;
|
|
|
+ vinl6-supply = <&main_dc_reg>;
|
|
|
+ vinl7-supply = <&main_dc_reg>;
|
|
|
+ vinl8-supply = <&buck8_reg>;
|
|
|
+ vinl9-supply = <&buck8_reg>;
|
|
|
+
|
|
|
+ s5m8767,pmic-buck2-dvs-voltage = <1300000>;
|
|
|
+ s5m8767,pmic-buck3-dvs-voltage = <1100000>;
|
|
|
+ s5m8767,pmic-buck4-dvs-voltage = <1200000>;
|
|
|
+ s5m8767,pmic-buck-dvs-gpios = <&gpd1 0 GPIO_ACTIVE_HIGH>,
|
|
|
+ <&gpd1 1 GPIO_ACTIVE_HIGH>,
|
|
|
+ <&gpd1 2 GPIO_ACTIVE_HIGH>;
|
|
|
+ s5m8767,pmic-buck-ds-gpios = <&gpx2 3 GPIO_ACTIVE_HIGH>,
|
|
|
+ <&gpx2 4 GPIO_ACTIVE_HIGH>,
|
|
|
+ <&gpx2 5 GPIO_ACTIVE_HIGH>;
|
|
|
+
|
|
|
+ regulators {
|
|
|
+ ldo1_reg: LDO1 {
|
|
|
+ regulator-name = "VDD_ALIVE_1.0V";
|
|
|
+ regulator-min-microvolt = <1100000>;
|
|
|
+ regulator-max-microvolt = <1100000>;
|
|
|
+ regulator-always-on;
|
|
|
+ regulator-boot-on;
|
|
|
+ op_mode = <1>;
|
|
|
+ };
|
|
|
+
|
|
|
+ ldo2_reg: LDO2 {
|
|
|
+ regulator-name = "VDD_28IO_DP_1.35V";
|
|
|
+ regulator-min-microvolt = <1200000>;
|
|
|
+ regulator-max-microvolt = <1200000>;
|
|
|
+ regulator-always-on;
|
|
|
+ regulator-boot-on;
|
|
|
+ op_mode = <1>;
|
|
|
+ };
|
|
|
+
|
|
|
+ ldo3_reg: LDO3 {
|
|
|
+ regulator-name = "VDD_COMMON1_1.8V";
|
|
|
+ regulator-min-microvolt = <1800000>;
|
|
|
+ regulator-max-microvolt = <1800000>;
|
|
|
+ regulator-always-on;
|
|
|
+ regulator-boot-on;
|
|
|
+ op_mode = <1>;
|
|
|
+ };
|
|
|
+
|
|
|
+ ldo4_reg: LDO4 {
|
|
|
+ regulator-name = "VDD_IOPERI_1.8V";
|
|
|
+ regulator-min-microvolt = <1800000>;
|
|
|
+ regulator-max-microvolt = <1800000>;
|
|
|
+ regulator-always-on;
|
|
|
+ op_mode = <1>;
|
|
|
+ };
|
|
|
+
|
|
|
+ ldo5_reg: LDO5 {
|
|
|
+ regulator-name = "VDD_EXT_1.8V";
|
|
|
+ regulator-min-microvolt = <1800000>;
|
|
|
+ regulator-max-microvolt = <1800000>;
|
|
|
+ regulator-always-on;
|
|
|
+ regulator-boot-on;
|
|
|
+ op_mode = <1>;
|
|
|
+ };
|
|
|
+
|
|
|
+ ldo6_reg: LDO6 {
|
|
|
+ regulator-name = "VDD_MPLL_1.1V";
|
|
|
+ regulator-min-microvolt = <1100000>;
|
|
|
+ regulator-max-microvolt = <1100000>;
|
|
|
+ regulator-always-on;
|
|
|
+ regulator-boot-on;
|
|
|
+ op_mode = <1>;
|
|
|
+ };
|
|
|
+
|
|
|
+ ldo7_reg: LDO7 {
|
|
|
+ regulator-name = "VDD_XPLL_1.1V";
|
|
|
+ regulator-min-microvolt = <1100000>;
|
|
|
+ regulator-max-microvolt = <1100000>;
|
|
|
+ regulator-always-on;
|
|
|
+ regulator-boot-on;
|
|
|
+ op_mode = <1>;
|
|
|
+ };
|
|
|
+
|
|
|
+ ldo8_reg: LDO8 {
|
|
|
+ regulator-name = "VDD_COMMON2_1.0V";
|
|
|
+ regulator-min-microvolt = <1000000>;
|
|
|
+ regulator-max-microvolt = <1000000>;
|
|
|
+ regulator-always-on;
|
|
|
+ regulator-boot-on;
|
|
|
+ op_mode = <1>;
|
|
|
+ };
|
|
|
+
|
|
|
+ ldo9_reg: LDO9 {
|
|
|
+ regulator-name = "VDD_33ON_3.0V";
|
|
|
+ regulator-min-microvolt = <3000000>;
|
|
|
+ regulator-max-microvolt = <3000000>;
|
|
|
+ op_mode = <1>;
|
|
|
+ };
|
|
|
+
|
|
|
+ ldo10_reg: LDO10 {
|
|
|
+ regulator-name = "VDD_COMMON3_1.8V";
|
|
|
+ regulator-min-microvolt = <1800000>;
|
|
|
+ regulator-max-microvolt = <1800000>;
|
|
|
+ regulator-always-on;
|
|
|
+ regulator-boot-on;
|
|
|
+ op_mode = <1>;
|
|
|
+ };
|
|
|
+
|
|
|
+ ldo11_reg: LDO11 {
|
|
|
+ regulator-name = "VDD_ABB2_1.8V";
|
|
|
+ regulator-min-microvolt = <1800000>;
|
|
|
+ regulator-max-microvolt = <1800000>;
|
|
|
+ regulator-always-on;
|
|
|
+ regulator-boot-on;
|
|
|
+ op_mode = <1>;
|
|
|
+ };
|
|
|
+
|
|
|
+ ldo12_reg: LDO12 {
|
|
|
+ regulator-name = "VDD_USB_3.0V";
|
|
|
+ regulator-min-microvolt = <3000000>;
|
|
|
+ regulator-max-microvolt = <3000000>;
|
|
|
+ regulator-always-on;
|
|
|
+ regulator-boot-on;
|
|
|
+ op_mode = <1>;
|
|
|
+ };
|
|
|
+
|
|
|
+ ldo13_reg: LDO13 {
|
|
|
+ regulator-name = "VDDQ_C2C_W_1.8V";
|
|
|
+ regulator-min-microvolt = <1800000>;
|
|
|
+ regulator-max-microvolt = <1800000>;
|
|
|
+ regulator-always-on;
|
|
|
+ regulator-boot-on;
|
|
|
+ op_mode = <1>;
|
|
|
+ };
|
|
|
+
|
|
|
+ ldo14_reg: LDO14 {
|
|
|
+ regulator-name = "VDD18_ABB0_3_1.8V";
|
|
|
+ regulator-min-microvolt = <1800000>;
|
|
|
+ regulator-max-microvolt = <1800000>;
|
|
|
+ regulator-always-on;
|
|
|
+ regulator-boot-on;
|
|
|
+ op_mode = <1>;
|
|
|
+ };
|
|
|
+
|
|
|
+ ldo15_reg: LDO15 {
|
|
|
+ regulator-name = "VDD10_COMMON4_1.0V";
|
|
|
+ regulator-min-microvolt = <1000000>;
|
|
|
+ regulator-max-microvolt = <1000000>;
|
|
|
+ regulator-always-on;
|
|
|
+ regulator-boot-on;
|
|
|
+ op_mode = <1>;
|
|
|
+ };
|
|
|
+
|
|
|
+ ldo16_reg: LDO16 {
|
|
|
+ regulator-name = "VDD18_HSIC_1.8V";
|
|
|
+ regulator-min-microvolt = <1800000>;
|
|
|
+ regulator-max-microvolt = <1800000>;
|
|
|
+ regulator-always-on;
|
|
|
+ regulator-boot-on;
|
|
|
+ op_mode = <1>;
|
|
|
+ };
|
|
|
+
|
|
|
+ ldo17_reg: LDO17 {
|
|
|
+ regulator-name = "VDDQ_MMC2_3_2.8V";
|
|
|
+ regulator-min-microvolt = <2800000>;
|
|
|
+ regulator-max-microvolt = <2800000>;
|
|
|
+ regulator-always-on;
|
|
|
+ regulator-boot-on;
|
|
|
+ op_mode = <1>;
|
|
|
+ };
|
|
|
+
|
|
|
+ ldo18_reg: LDO18 {
|
|
|
+ regulator-name = "VDD_33ON_2.8V";
|
|
|
+ regulator-min-microvolt = <2800000>;
|
|
|
+ regulator-max-microvolt = <2800000>;
|
|
|
+ op_mode = <1>;
|
|
|
+ };
|
|
|
+
|
|
|
+ ldo22_reg: LDO22 {
|
|
|
+ regulator-name = "EXT_33_OFF";
|
|
|
+ regulator-min-microvolt = <3300000>;
|
|
|
+ regulator-max-microvolt = <3300000>;
|
|
|
+ op_mode = <1>;
|
|
|
+ };
|
|
|
+
|
|
|
+ ldo23_reg: LDO23 {
|
|
|
+ regulator-name = "EXT_28_OFF";
|
|
|
+ regulator-min-microvolt = <2800000>;
|
|
|
+ regulator-max-microvolt = <2800000>;
|
|
|
+ op_mode = <1>;
|
|
|
+ };
|
|
|
+
|
|
|
+ ldo25_reg: LDO25 {
|
|
|
+ regulator-name = "PVDD_LDO25";
|
|
|
+ regulator-min-microvolt = <1200000>;
|
|
|
+ regulator-max-microvolt = <1200000>;
|
|
|
+ op_mode = <1>;
|
|
|
+ };
|
|
|
+
|
|
|
+ ldo26_reg: LDO26 {
|
|
|
+ regulator-name = "EXT_18_OFF";
|
|
|
+ regulator-min-microvolt = <1800000>;
|
|
|
+ regulator-max-microvolt = <1800000>;
|
|
|
+ op_mode = <1>;
|
|
|
+ };
|
|
|
+
|
|
|
+ buck1_reg: BUCK1 {
|
|
|
+ regulator-name = "vdd_mif";
|
|
|
+ regulator-min-microvolt = <950000>;
|
|
|
+ regulator-max-microvolt = <1200000>;
|
|
|
+ regulator-always-on;
|
|
|
+ regulator-boot-on;
|
|
|
+ op_mode = <1>;
|
|
|
+ };
|
|
|
+
|
|
|
+ buck2_reg: BUCK2 {
|
|
|
+ regulator-name = "vdd_arm";
|
|
|
+ regulator-min-microvolt = <912500>;
|
|
|
+ regulator-max-microvolt = <1300000>;
|
|
|
+ regulator-always-on;
|
|
|
+ regulator-boot-on;
|
|
|
+ op_mode = <1>;
|
|
|
+ };
|
|
|
+
|
|
|
+ buck3_reg: BUCK3 {
|
|
|
+ regulator-name = "vdd_int";
|
|
|
+ regulator-min-microvolt = <900000>;
|
|
|
+ regulator-max-microvolt = <1200000>;
|
|
|
+ regulator-always-on;
|
|
|
+ regulator-boot-on;
|
|
|
+ op_mode = <1>;
|
|
|
+ };
|
|
|
+
|
|
|
+ buck4_reg: BUCK4 {
|
|
|
+ regulator-name = "vdd_g3d";
|
|
|
+ regulator-min-microvolt = <1000000>;
|
|
|
+ regulator-max-microvolt = <1000000>;
|
|
|
+ regulator-always-on;
|
|
|
+ regulator-boot-on;
|
|
|
+ op_mode = <1>;
|
|
|
+ };
|
|
|
+
|
|
|
+ buck5_reg: BUCK5 {
|
|
|
+ regulator-name = "VDD_MEM_1.35V";
|
|
|
+ regulator-min-microvolt = <750000>;
|
|
|
+ regulator-max-microvolt = <1355000>;
|
|
|
+ regulator-always-on;
|
|
|
+ regulator-boot-on;
|
|
|
+ op_mode = <1>;
|
|
|
+ };
|
|
|
+
|
|
|
+ buck7_reg: BUCK7 {
|
|
|
+ regulator-name = "PVDD_BUCK7";
|
|
|
+ regulator-always-on;
|
|
|
+ op_mode = <1>;
|
|
|
+ };
|
|
|
+
|
|
|
+ buck8_reg: BUCK8 {
|
|
|
+ regulator-name = "PVDD_BUCK8";
|
|
|
+ regulator-always-on;
|
|
|
+ op_mode = <1>;
|
|
|
+ };
|
|
|
+
|
|
|
+ buck9_reg: BUCK9 {
|
|
|
+ regulator-name = "VDD_33_OFF_EXT1";
|
|
|
+ regulator-min-microvolt = <750000>;
|
|
|
+ regulator-max-microvolt = <3000000>;
|
|
|
+ op_mode = <1>;
|
|
|
+ };
|
|
|
};
|
|
|
};
|
|
|
};
|
|
|
+
|
|
|
+&i2c_2 {
|
|
|
+ status = "okay";
|
|
|
+
|
|
|
+ samsung,i2c-sda-delay = <100>;
|
|
|
+ samsung,i2c-max-bus-freq = <66000>;
|
|
|
+ samsung,i2c-slave-addr = <0x50>;
|
|
|
+
|
|
|
+ hdmiddc@50 {
|
|
|
+ compatible = "samsung,exynos4210-hdmiddc";
|
|
|
+ reg = <0x50>;
|
|
|
+ };
|
|
|
+};
|
|
|
+
|
|
|
+&i2c_3 {
|
|
|
+ status = "okay";
|
|
|
+
|
|
|
+ wm1811a@1a {
|
|
|
+ compatible = "wlf,wm1811";
|
|
|
+ reg = <0x1a>;
|
|
|
+
|
|
|
+ AVDD2-supply = <&main_dc_reg>;
|
|
|
+ CPVDD-supply = <&main_dc_reg>;
|
|
|
+ DBVDD1-supply = <&main_dc_reg>;
|
|
|
+ DBVDD2-supply = <&main_dc_reg>;
|
|
|
+ DBVDD3-supply = <&main_dc_reg>;
|
|
|
+ LDO1VDD-supply = <&main_dc_reg>;
|
|
|
+ SPKVDD1-supply = <&main_dc_reg>;
|
|
|
+ SPKVDD2-supply = <&main_dc_reg>;
|
|
|
+
|
|
|
+ wlf,ldo1ena = <&gpb0 0 GPIO_ACTIVE_HIGH>;
|
|
|
+ wlf,ldo2ena = <&gpb0 1 GPIO_ACTIVE_HIGH>;
|
|
|
+ };
|
|
|
+};
|
|
|
+
|
|
|
+&i2c_8 {
|
|
|
+ status = "okay";
|
|
|
+
|
|
|
+ samsung,i2c-sda-delay = <100>;
|
|
|
+ samsung,i2c-max-bus-freq = <66000>;
|
|
|
+ samsung,i2c-slave-addr = <0x38>;
|
|
|
+
|
|
|
+ hdmiphy@38 {
|
|
|
+ compatible = "samsung,exynos4212-hdmiphy";
|
|
|
+ reg = <0x38>;
|
|
|
+ };
|
|
|
+};
|
|
|
+
|
|
|
+&i2c_9 {
|
|
|
+ status = "okay";
|
|
|
+ samsung,i2c-sda-delay = <100>;
|
|
|
+ samsung,i2c-max-bus-freq = <40000>;
|
|
|
+ samsung,i2c-slave-addr = <0x38>;
|
|
|
+
|
|
|
+ sata_phy_i2c:sata-phy@38 {
|
|
|
+ compatible = "samsung,exynos-sataphy-i2c";
|
|
|
+ reg = <0x38>;
|
|
|
+ };
|
|
|
+};
|
|
|
+
|
|
|
+&i2s0 {
|
|
|
+ status = "okay";
|
|
|
+};
|
|
|
+
|
|
|
+&mfc {
|
|
|
+ samsung,mfc-r = <0x43000000 0x800000>;
|
|
|
+ samsung,mfc-l = <0x51000000 0x800000>;
|
|
|
+};
|
|
|
+
|
|
|
+&mmc_0 {
|
|
|
+ status = "okay";
|
|
|
+ num-slots = <1>;
|
|
|
+ broken-cd;
|
|
|
+ card-detect-delay = <200>;
|
|
|
+ samsung,dw-mshc-ciu-div = <3>;
|
|
|
+ samsung,dw-mshc-sdr-timing = <2 3>;
|
|
|
+ samsung,dw-mshc-ddr-timing = <1 2>;
|
|
|
+ vmmc-supply = <&mmc_reg>;
|
|
|
+ pinctrl-names = "default";
|
|
|
+ pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>;
|
|
|
+ bus-width = <8>;
|
|
|
+ cap-mmc-highspeed;
|
|
|
+};
|
|
|
+
|
|
|
+&mmc_2 {
|
|
|
+ status = "okay";
|
|
|
+ num-slots = <1>;
|
|
|
+ card-detect-delay = <200>;
|
|
|
+ samsung,dw-mshc-ciu-div = <3>;
|
|
|
+ samsung,dw-mshc-sdr-timing = <2 3>;
|
|
|
+ samsung,dw-mshc-ddr-timing = <1 2>;
|
|
|
+ vmmc-supply = <&mmc_reg>;
|
|
|
+ pinctrl-names = "default";
|
|
|
+ pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
|
|
|
+ bus-width = <4>;
|
|
|
+ disable-wp;
|
|
|
+ cap-sd-highspeed;
|
|
|
+};
|
|
|
+
|
|
|
+&rtc {
|
|
|
+ status = "okay";
|
|
|
+};
|
|
|
+
|
|
|
+&sata {
|
|
|
+ status = "okay";
|
|
|
+};
|
|
|
+
|
|
|
+&sata_phy {
|
|
|
+ status = "okay";
|
|
|
+ samsung,exynos-sataphy-i2c-phandle = <&sata_phy_i2c>;
|
|
|
+};
|