MIPS: BMIPS: Add support GPIO device nodes

Adds GPIO device nodes to BCM7xxx MIPS based SoCs.

Signed-off-by: Jaedon Shin <jaedon.shin@gmail.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Jonas Gorski <jonas.gorski@gmail.com>
Cc: Kevin Cernekee <cernekee@gmail.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: MIPS Mailing List <linux-mips@linux-mips.org>
Cc: devicetree@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/14001/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

arch/mips/boot/dts/brcm/bcm7125.dtsi

@@ -197,6 +197,18 @@
 			status = "disabled";
 		};
 
+		upg_gio: gpio@406700 {
+			compatible = "brcm,brcmstb-gpio";
+			reg = <0x406700 0x80>;
+			#gpio-cells = <2>;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			interrupt-controller;
+			interrupt-parent = <&upg_irq0_intc>;
+			interrupts = <6>;
+			brcm,gpio-bank-widths = <32 32 32 18>;
+		};
+
 		ehci0: usb@488300 {
 			compatible = "brcm,bcm7125-ehci", "generic-ehci";
 			reg = <0x488300 0x100>;

arch/mips/boot/dts/brcm/bcm7346.dtsi

@@ -232,6 +232,43 @@
 			status = "disabled";
 		};
 
+		aon_pm_l2_intc: interrupt-controller@408440 {
+			compatible = "brcm,l2-intc";
+			reg = <0x408440 0x30>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <53>;
+			brcm,irq-can-wake;
+		};
+
+		upg_gio: gpio@406700 {
+			compatible = "brcm,brcmstb-gpio";
+			reg = <0x406700 0x60>;
+			#gpio-cells = <2>;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			interrupt-controller;
+			interrupt-parent = <&upg_irq0_intc>;
+			interrupts = <6>;
+			brcm,gpio-bank-widths = <32 32 16>;
+		};
+
+		upg_gio_aon: gpio@408c00 {
+			compatible = "brcm,brcmstb-gpio";
+			reg = <0x408c00 0x60>;
+			#gpio-cells = <2>;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			interrupt-controller;
+			interrupt-parent = <&upg_aon_irq0_intc>;
+			interrupts = <6>;
+			interrupts-extended = <&upg_aon_irq0_intc 6>,
+					      <&aon_pm_l2_intc 5>;
+			wakeup-source;
+			brcm,gpio-bank-widths = <27 32 2>;
+		};
+
 		enet0: ethernet@430000 {
 			phy-mode = "internal";
 			phy-handle = <&phy1>;

arch/mips/boot/dts/brcm/bcm7358.dtsi

@@ -216,6 +216,43 @@
 			status = "disabled";
 		};
 
+		aon_pm_l2_intc: interrupt-controller@408240 {
+			compatible = "brcm,l2-intc";
+			reg = <0x408240 0x30>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <50>;
+			brcm,irq-can-wake;
+		};
+
+		upg_gio: gpio@406500 {
+			compatible = "brcm,brcmstb-gpio";
+			reg = <0x406500 0xa0>;
+			#gpio-cells = <2>;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			interrupt-controller;
+			interrupt-parent = <&upg_irq0_intc>;
+			interrupts = <6>;
+			brcm,gpio-bank-widths = <32 32 32 29 4>;
+		};
+
+		upg_gio_aon: gpio@408c00 {
+			compatible = "brcm,brcmstb-gpio";
+			reg = <0x408c00 0x60>;
+			#gpio-cells = <2>;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			interrupt-controller;
+			interrupt-parent = <&upg_aon_irq0_intc>;
+			interrupts = <6>;
+			interrupts-extended = <&upg_aon_irq0_intc 6>,
+					      <&aon_pm_l2_intc 5>;
+			wakeup-source;
+			brcm,gpio-bank-widths = <21 32 2>;
+		};
+
 		enet0: ethernet@430000 {
 			phy-mode = "internal";
 			phy-handle = <&phy1>;

arch/mips/boot/dts/brcm/bcm7360.dtsi

@@ -208,6 +208,43 @@
 			status = "disabled";
 		};
 
+		aon_pm_l2_intc: interrupt-controller@408440 {
+			compatible = "brcm,l2-intc";
+			reg = <0x408440 0x30>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <50>;
+			brcm,irq-can-wake;
+		};
+
+		upg_gio: gpio@406500 {
+			compatible = "brcm,brcmstb-gpio";
+			reg = <0x406500 0xa0>;
+			#gpio-cells = <2>;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			interrupt-controller;
+			interrupt-parent = <&upg_irq0_intc>;
+			interrupts = <6>;
+			brcm,gpio-bank-widths = <32 32 32 29 4>;
+		};
+
+		upg_gio_aon: gpio@408c00 {
+			compatible = "brcm,brcmstb-gpio";
+			reg = <0x408c00 0x60>;
+			#gpio-cells = <2>;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			interrupt-controller;
+			interrupt-parent = <&upg_aon_irq0_intc>;
+			interrupts = <6>;
+			interrupts-extended = <&upg_aon_irq0_intc 6>,
+					      <&aon_pm_l2_intc 5>;
+			wakeup-source;
+			brcm,gpio-bank-widths = <21 32 2>;
+		};
+
 		enet0: ethernet@430000 {
 			phy-mode = "internal";
 			phy-handle = <&phy1>;

arch/mips/boot/dts/brcm/bcm7362.dtsi

@@ -204,6 +204,43 @@
 			status = "disabled";
 		};
 
+		aon_pm_l2_intc: interrupt-controller@408440 {
+			compatible = "brcm,l2-intc";
+			reg = <0x408440 0x30>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <50>;
+			brcm,irq-can-wake;
+		};
+
+		upg_gio: gpio@406500 {
+			compatible = "brcm,brcmstb-gpio";
+			reg = <0x406500 0xa0>;
+			#gpio-cells = <2>;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			interrupt-controller;
+			interrupt-parent = <&upg_irq0_intc>;
+			interrupts = <6>;
+			brcm,gpio-bank-widths = <32 32 32 29 4>;
+		};
+
+		upg_gio_aon: gpio@408c00 {
+			compatible = "brcm,brcmstb-gpio";
+			reg = <0x408c00 0x60>;
+			#gpio-cells = <2>;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			interrupt-controller;
+			interrupt-parent = <&upg_aon_irq0_intc>;
+			interrupts = <6>;
+			interrupts-extended = <&upg_aon_irq0_intc 6>,
+					      <&aon_pm_l2_intc 5>;
+			wakeup-source;
+			brcm,gpio-bank-widths = <21 32 2>;
+		};
+
 		enet0: ethernet@430000 {
 			phy-mode = "internal";
 			phy-handle = <&phy1>;

arch/mips/boot/dts/brcm/bcm7420.dtsi

@@ -213,6 +213,18 @@
 			status = "disabled";
 		};
 
+		upg_gio: gpio@406700 {
+			compatible = "brcm,brcmstb-gpio";
+			reg = <0x406700 0x80>;
+			#gpio-cells = <2>;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			interrupt-controller;
+			interrupt-parent = <&upg_irq0_intc>;
+			interrupts = <6>;
+			brcm,gpio-bank-widths = <32 32 32 27>;
+		};
+
 		enet0: ethernet@468000 {
 			phy-mode = "internal";
 			phy-handle = <&phy1>;

arch/mips/boot/dts/brcm/bcm7425.dtsi

@@ -231,6 +231,43 @@
 			status = "disabled";
 		};
 
+		aon_pm_l2_intc: interrupt-controller@408440 {
+			compatible = "brcm,l2-intc";
+			reg = <0x408440 0x30>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <49>;
+			brcm,irq-can-wake;
+		};
+
+		upg_gio: gpio@406700 {
+			compatible = "brcm,brcmstb-gpio";
+			reg = <0x406700 0x80>;
+			#gpio-cells = <2>;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			interrupt-controller;
+			interrupt-parent = <&upg_irq0_intc>;
+			interrupts = <6>;
+			brcm,gpio-bank-widths = <32 32 32 21>;
+		};
+
+		upg_gio_aon: gpio@4094c0 {
+			compatible = "brcm,brcmstb-gpio";
+			reg = <0x4094c0 0x40>;
+			#gpio-cells = <2>;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			interrupt-controller;
+			interrupt-parent = <&upg_aon_irq0_intc>;
+			interrupts = <6>;
+			interrupts-extended = <&upg_aon_irq0_intc 6>,
+					      <&aon_pm_l2_intc 5>;
+			wakeup-source;
+			brcm,gpio-bank-widths = <18 4>;
+		};
+
 		enet0: ethernet@b80000 {
 			phy-mode = "internal";
 			phy-handle = <&phy1>;

arch/mips/boot/dts/brcm/bcm7435.dtsi

@@ -246,6 +246,43 @@
 			status = "disabled";
 		};
 
+		aon_pm_l2_intc: interrupt-controller@408440 {
+			compatible = "brcm,l2-intc";
+			reg = <0x408440 0x30>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&periph_intc>;
+			interrupts = <54>;
+			brcm,irq-can-wake;
+		};
+
+		upg_gio: gpio@406700 {
+			compatible = "brcm,brcmstb-gpio";
+			reg = <0x406700 0x80>;
+			#gpio-cells = <2>;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			interrupt-controller;
+			interrupt-parent = <&upg_irq0_intc>;
+			interrupts = <6>;
+			brcm,gpio-bank-widths = <32 32 32 21>;
+		};
+
+		upg_gio_aon: gpio@4094c0 {
+			compatible = "brcm,brcmstb-gpio";
+			reg = <0x4094c0 0x40>;
+			#gpio-cells = <2>;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			interrupt-controller;
+			interrupt-parent = <&upg_aon_irq0_intc>;
+			interrupts = <6>;
+			interrupts-extended = <&upg_aon_irq0_intc 6>,
+					      <&aon_pm_l2_intc 5>;
+			wakeup-source;
+			brcm,gpio-bank-widths = <18 4>;
+		};
+
 		enet0: ethernet@b80000 {
 			phy-mode = "internal";
 			phy-handle = <&phy1>;