Merge branch 'linus' into perf/core, to pick up fixes

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Documentation/devicetree/bindings/arm/marvell/cp110-system-controller0.txt

@@ -45,7 +45,7 @@ The following clocks are available:
    - 1 15	SATA
    - 1 16	SATA USB
    - 1 17	Main
-   - 1 18	SD/MMC
+   - 1 18	SD/MMC/GOP
    - 1 21	Slow IO (SPI, NOR, BootROM, I2C, UART)
    - 1 22	USB3H0
    - 1 23	USB3H1
@@ -65,7 +65,7 @@ Required properties:
 	"cpm-audio", "cpm-communit", "cpm-nand", "cpm-ppv2", "cpm-sdio",
 	"cpm-mg-domain", "cpm-mg-core", "cpm-xor1", "cpm-xor0", "cpm-gop-dp", "none",
 	"cpm-pcie_x10", "cpm-pcie_x11", "cpm-pcie_x4", "cpm-pcie-xor", "cpm-sata",
-	"cpm-sata-usb", "cpm-main", "cpm-sd-mmc", "none", "none", "cpm-slow-io",
+	"cpm-sata-usb", "cpm-main", "cpm-sd-mmc-gop", "none", "none", "cpm-slow-io",
 	"cpm-usb3h0", "cpm-usb3h1", "cpm-usb3dev", "cpm-eip150", "cpm-eip197";
 
 Example:
@@ -78,6 +78,6 @@ Example:
 		gate-clock-output-names = "cpm-audio", "cpm-communit", "cpm-nand", "cpm-ppv2", "cpm-sdio",
 			"cpm-mg-domain", "cpm-mg-core", "cpm-xor1", "cpm-xor0", "cpm-gop-dp", "none",
 			"cpm-pcie_x10", "cpm-pcie_x11", "cpm-pcie_x4", "cpm-pcie-xor", "cpm-sata",
-			"cpm-sata-usb", "cpm-main", "cpm-sd-mmc", "none", "none", "cpm-slow-io",
+			"cpm-sata-usb", "cpm-main", "cpm-sd-mmc-gop", "none", "none", "cpm-slow-io",
 			"cpm-usb3h0", "cpm-usb3h1", "cpm-usb3dev", "cpm-eip150", "cpm-eip197";
 	};

Documentation/devicetree/bindings/display/exynos/exynos_dsim.txt

@@ -4,7 +4,6 @@ Required properties:
   - compatible: value should be one of the following
 		"samsung,exynos3250-mipi-dsi" /* for Exynos3250/3472 SoCs */
 		"samsung,exynos4210-mipi-dsi" /* for Exynos4 SoCs */
-		"samsung,exynos4415-mipi-dsi" /* for Exynos4415 SoC */
 		"samsung,exynos5410-mipi-dsi" /* for Exynos5410/5420/5440 SoCs */
 		"samsung,exynos5422-mipi-dsi" /* for Exynos5422/5800 SoCs */
 		"samsung,exynos5433-mipi-dsi" /* for Exynos5433 SoCs */

Documentation/devicetree/bindings/display/exynos/samsung-fimd.txt

@@ -11,7 +11,6 @@ Required properties:
 		"samsung,s5pv210-fimd"; /* for S5PV210 SoC */
 		"samsung,exynos3250-fimd"; /* for Exynos3250/3472 SoCs */
 		"samsung,exynos4210-fimd"; /* for Exynos4 SoCs */
-		"samsung,exynos4415-fimd"; /* for Exynos4415 SoC */
 		"samsung,exynos5250-fimd"; /* for Exynos5250 SoCs */
 		"samsung,exynos5420-fimd"; /* for Exynos5420/5422/5800 SoCs */
 

Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.txt

@@ -13,7 +13,7 @@ Required Properties:
 	- "rockchip,rk2928-dw-mshc": for Rockchip RK2928 and following,
 							before RK3288
 	- "rockchip,rk3288-dw-mshc": for Rockchip RK3288
-	- "rockchip,rk1108-dw-mshc", "rockchip,rk3288-dw-mshc": for Rockchip RK1108
+	- "rockchip,rv1108-dw-mshc", "rockchip,rk3288-dw-mshc": for Rockchip RV1108
 	- "rockchip,rk3036-dw-mshc", "rockchip,rk3288-dw-mshc": for Rockchip RK3036
 	- "rockchip,rk3368-dw-mshc", "rockchip,rk3288-dw-mshc": for Rockchip RK3368
 	- "rockchip,rk3399-dw-mshc", "rockchip,rk3288-dw-mshc": for Rockchip RK3399

Documentation/devicetree/bindings/phy/brcm,nsp-usb3-phy.txt

@@ -1,39 +0,0 @@
-Broadcom USB3 phy binding for northstar plus SoC
-The USB3 phy is internal to the SoC and is accessed using mdio interface.
-
-Required mdio bus properties:
-- reg: Should be 0x0 for SoC internal USB3 phy
-- #address-cells: must be 1
-- #size-cells: must be 0
-
-Required USB3 PHY properties:
-- compatible: should be "brcm,nsp-usb3-phy"
-- reg: USB3 Phy address on SoC internal MDIO bus and it should be 0x10.
-- usb3-ctrl-syscon: handler of syscon node defining physical address
-  of usb3 control register.
-- #phy-cells: must be 0
-
-Required usb3 control properties:
-- compatible: should be "brcm,nsp-usb3-ctrl"
-- reg: offset and length of the control registers
-
-Example:
-
-	mdio@0 {
-		reg = <0x0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		usb3_phy: usb-phy@10 {
-			compatible = "brcm,nsp-usb3-phy";
-			reg = <0x10>;
-			usb3-ctrl-syscon = <&usb3_ctrl>;
-			#phy-cells = <0>;
-			status = "disabled";
-		};
-	};
-
-	usb3_ctrl: syscon@104408 {
-		compatible = "brcm,nsp-usb3-ctrl", "syscon";
-		reg = <0x104408 0x3fc>;
-	};

Documentation/extcon/intel-int3496.txt

@@ -20,3 +20,8 @@ Index 1: The output gpio for enabling Vbus output from the device to the otg
 Index 2: The output gpio for muxing of the data pins between the USB host and
          the USB peripheral controller, write 1 to mux to the peripheral
          controller
+
+There is a mapping between indices and GPIO connection IDs as follows
+	id	index 0
+	vbus	index 1
+	mux	index 2

Documentation/gcc-plugins.txt

@@ -18,8 +18,8 @@ because gcc versions 4.5 and 4.6 are compiled by a C compiler,
 gcc-4.7 can be compiled by a C or a C++ compiler,
 and versions 4.8+ can only be compiled by a C++ compiler.
 
-Currently the GCC plugin infrastructure supports only the x86, arm and arm64
-architectures.
+Currently the GCC plugin infrastructure supports only the x86, arm, arm64 and
+powerpc architectures.
 
 This infrastructure was ported from grsecurity [6] and PaX [7].
 

Documentation/virtual/kvm/api.txt

@@ -3377,6 +3377,69 @@ struct kvm_ppc_resize_hpt {
 	__u32 pad;
 };
 
+4.104 KVM_X86_GET_MCE_CAP_SUPPORTED
+
+Capability: KVM_CAP_MCE
+Architectures: x86
+Type: system ioctl
+Parameters: u64 mce_cap (out)
+Returns: 0 on success, -1 on error
+
+Returns supported MCE capabilities. The u64 mce_cap parameter
+has the same format as the MSR_IA32_MCG_CAP register. Supported
+capabilities will have the corresponding bits set.
+
+4.105 KVM_X86_SETUP_MCE
+
+Capability: KVM_CAP_MCE
+Architectures: x86
+Type: vcpu ioctl
+Parameters: u64 mcg_cap (in)
+Returns: 0 on success,
+         -EFAULT if u64 mcg_cap cannot be read,
+         -EINVAL if the requested number of banks is invalid,
+         -EINVAL if requested MCE capability is not supported.
+
+Initializes MCE support for use. The u64 mcg_cap parameter
+has the same format as the MSR_IA32_MCG_CAP register and
+specifies which capabilities should be enabled. The maximum
+supported number of error-reporting banks can be retrieved when
+checking for KVM_CAP_MCE. The supported capabilities can be
+retrieved with KVM_X86_GET_MCE_CAP_SUPPORTED.
+
+4.106 KVM_X86_SET_MCE
+
+Capability: KVM_CAP_MCE
+Architectures: x86
+Type: vcpu ioctl
+Parameters: struct kvm_x86_mce (in)
+Returns: 0 on success,
+         -EFAULT if struct kvm_x86_mce cannot be read,
+         -EINVAL if the bank number is invalid,
+         -EINVAL if VAL bit is not set in status field.
+
+Inject a machine check error (MCE) into the guest. The input
+parameter is:
+
+struct kvm_x86_mce {
+	__u64 status;
+	__u64 addr;
+	__u64 misc;
+	__u64 mcg_status;
+	__u8 bank;
+	__u8 pad1[7];
+	__u64 pad2[3];
+};
+
+If the MCE being reported is an uncorrected error, KVM will
+inject it as an MCE exception into the guest. If the guest
+MCG_STATUS register reports that an MCE is in progress, KVM
+causes an KVM_EXIT_SHUTDOWN vmexit.
+
+Otherwise, if the MCE is a corrected error, KVM will just
+store it in the corresponding bank (provided this bank is
+not holding a previously reported uncorrected error).
+
 5. The kvm_run structure
 ------------------------
 

MAINTAINERS

@@ -3216,7 +3216,6 @@ F:	drivers/platform/chrome/
 
 CISCO VIC ETHERNET NIC DRIVER
 M:	Christian Benvenuti <benve@cisco.com>
-M:	Sujith Sankar <ssujith@cisco.com>
 M:	Govindarajulu Varadarajan <_govind@gmx.com>
 M:	Neel Patel <neepatel@cisco.com>
 S:	Supported
@@ -4776,6 +4775,12 @@ L:	linux-edac@vger.kernel.org
 S:	Maintained
 F:	drivers/edac/mpc85xx_edac.[ch]
 
+EDAC-PND2
+M:	Tony Luck <tony.luck@intel.com>
+L:	linux-edac@vger.kernel.org
+S:	Maintained
+F:	drivers/edac/pnd2_edac.[ch]
+
 EDAC-PASEMI
 M:	Egor Martovetsky <egor@pasemi.com>
 L:	linux-edac@vger.kernel.org
@@ -7774,13 +7779,6 @@ F:	include/net/mac80211.h
 F:	net/mac80211/
 F:	drivers/net/wireless/mac80211_hwsim.[ch]
 
-MACVLAN DRIVER
-M:	Patrick McHardy <kaber@trash.net>
-L:	netdev@vger.kernel.org
-S:	Maintained
-F:	drivers/net/macvlan.c
-F:	include/linux/if_macvlan.h
-
 MAILBOX API
 M:	Jassi Brar <jassisinghbrar@gmail.com>
 L:	linux-kernel@vger.kernel.org
@@ -7853,6 +7851,8 @@ F:	drivers/net/ethernet/marvell/mvneta.*
 MARVELL MWIFIEX WIRELESS DRIVER
 M:	Amitkumar Karwar <akarwar@marvell.com>
 M:	Nishant Sarmukadam <nishants@marvell.com>
+M:	Ganapathi Bhat <gbhat@marvell.com>
+M:	Xinming Hu <huxm@marvell.com>
 L:	linux-wireless@vger.kernel.org
 S:	Maintained
 F:	drivers/net/wireless/marvell/mwifiex/
@@ -13383,14 +13383,6 @@ W:	https://linuxtv.org
 S:	Maintained
 F:	drivers/media/platform/vivid/*
 
-VLAN (802.1Q)
-M:	Patrick McHardy <kaber@trash.net>
-L:	netdev@vger.kernel.org
-S:	Maintained
-F:	drivers/net/macvlan.c
-F:	include/linux/if_*vlan.h
-F:	net/8021q/
-
 VLYNQ BUS
 M:	Florian Fainelli <f.fainelli@gmail.com>
 L:	openwrt-devel@lists.openwrt.org (subscribers-only)

Makefile

@@ -1,7 +1,7 @@
 VERSION = 4
 PATCHLEVEL = 11
 SUBLEVEL = 0
-EXTRAVERSION = -rc2
+EXTRAVERSION = -rc4
 NAME = Fearless Coyote
 
 # *DOCUMENTATION*

arch/arm/boot/dts/am335x-pcm-953.dtsi

@@ -63,14 +63,14 @@
 			label = "home";
 			linux,code = <KEY_HOME>;
 			gpios = <&gpio3 7 GPIO_ACTIVE_HIGH>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		button@1 {
 			label = "menu";
 			linux,code = <KEY_MENU>;
 			gpios = <&gpio3 8 GPIO_ACTIVE_HIGH>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 	};

arch/arm/boot/dts/am57xx-idk-common.dtsi

@@ -315,6 +315,13 @@
 			/* ID & VBUS GPIOs provided in board dts */
 		};
 	};
+
+	tpic2810: tpic2810@60 {
+		compatible = "ti,tpic2810";
+		reg = <0x60>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
 };
 
 &mcspi3 {
@@ -330,13 +337,6 @@
 		spi-max-frequency = <1000000>;
 		spi-cpol;
 	};
-
-	tpic2810: tpic2810@60 {
-		compatible = "ti,tpic2810";
-		reg = <0x60>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
 };
 
 &uart3 {

arch/arm/boot/dts/bcm5301x.dtsi

@@ -66,14 +66,14 @@
 		timer@20200 {
 			compatible = "arm,cortex-a9-global-timer";
 			reg = <0x20200 0x100>;
-			interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_PPI 11 IRQ_TYPE_EDGE_RISING>;
 			clocks = <&periph_clk>;
 		};
 
 		local-timer@20600 {
 			compatible = "arm,cortex-a9-twd-timer";
 			reg = <0x20600 0x100>;
-			interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_PPI 13 IRQ_TYPE_EDGE_RISING>;
 			clocks = <&periph_clk>;
 		};
 

arch/arm/boot/dts/bcm953012k.dts

@@ -48,15 +48,14 @@
 	};
 
 	memory {
-		reg = <0x00000000 0x10000000>;
+		reg = <0x80000000 0x10000000>;
 	};
 };
 
 &uart0 {
-	clock-frequency = <62499840>;
+	status = "okay";
 };
 
 &uart1 {
-	clock-frequency = <62499840>;
 	status = "okay";
 };

arch/arm/boot/dts/bcm958522er.dts

@@ -55,6 +55,7 @@
 	gpio-restart {
 		compatible = "gpio-restart";
 		gpios = <&gpioa 15 GPIO_ACTIVE_LOW>;
+		open-source;
 		priority = <200>;
 	};
 };

arch/arm/boot/dts/bcm958525er.dts

@@ -55,6 +55,7 @@
 	gpio-restart {
 		compatible = "gpio-restart";
 		gpios = <&gpioa 15 GPIO_ACTIVE_LOW>;
+		open-source;
 		priority = <200>;
 	};
 };

arch/arm/boot/dts/bcm958525xmc.dts

@@ -55,6 +55,7 @@
 	gpio-restart {
 		compatible = "gpio-restart";
 		gpios = <&gpioa 31 GPIO_ACTIVE_LOW>;
+		open-source;
 		priority = <200>;
 	};
 };

arch/arm/boot/dts/bcm958622hr.dts

@@ -55,6 +55,7 @@
 	gpio-restart {
 		compatible = "gpio-restart";
 		gpios = <&gpioa 15 GPIO_ACTIVE_LOW>;
+		open-source;
 		priority = <200>;
 	};
 };

arch/arm/boot/dts/bcm958623hr.dts

@@ -55,6 +55,7 @@
 	gpio-restart {
 		compatible = "gpio-restart";
 		gpios = <&gpioa 15 GPIO_ACTIVE_LOW>;
+		open-source;
 		priority = <200>;
 	};
 };

arch/arm/boot/dts/bcm958625hr.dts

@@ -55,6 +55,7 @@
 	gpio-restart {
 		compatible = "gpio-restart";
 		gpios = <&gpioa 15 GPIO_ACTIVE_LOW>;
+		open-source;
 		priority = <200>;
 	};
 };

arch/arm/boot/dts/bcm988312hr.dts

@@ -55,6 +55,7 @@
 	gpio-restart {
 		compatible = "gpio-restart";
 		gpios = <&gpioa 15 GPIO_ACTIVE_LOW>;
+		open-source;
 		priority = <200>;
 	};
 };

arch/arm/boot/dts/imx6sx-udoo-neo.dtsi

@@ -121,11 +121,6 @@
 	};
 };
 
-&cpu0 {
-	arm-supply = <&sw1a_reg>;
-	soc-supply = <&sw1c_reg>;
-};
-
 &fec1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet1>;

arch/arm/boot/dts/sama5d2.dtsi

@@ -266,7 +266,7 @@
 		};
 
 		usb1: ohci@00400000 {
-			compatible = "atmel,sama5d2-ohci", "usb-ohci";
+			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
 			reg = <0x00400000 0x100000>;
 			interrupts = <41 IRQ_TYPE_LEVEL_HIGH 2>;
 			clocks = <&uhphs_clk>, <&uhphs_clk>, <&uhpck>;

arch/arm/boot/dts/ste-dbx5x0.dtsi

@@ -14,6 +14,7 @@
 #include <dt-bindings/mfd/dbx500-prcmu.h>
 #include <dt-bindings/arm/ux500_pm_domains.h>
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/ste-ab8500.h>
 #include "skeleton.dtsi"
 
 / {
@@ -603,6 +604,11 @@
 				interrupt-controller;
 				#interrupt-cells = <2>;
 
+				ab8500_clock: clock-controller {
+					compatible = "stericsson,ab8500-clk";
+					#clock-cells = <1>;
+				};
+
 				ab8500_gpio: ab8500-gpio {
 					compatible = "stericsson,ab8500-gpio";
 					gpio-controller;
@@ -686,6 +692,8 @@
 
 				ab8500-pwm {
 					compatible = "stericsson,ab8500-pwm";
+					clocks = <&ab8500_clock AB8500_SYSCLK_INT>;
+					clock-names = "intclk";
 				};
 
 				ab8500-debugfs {
@@ -700,6 +708,9 @@
 					V-AMIC2-supply = <&ab8500_ldo_anamic2_reg>;
 					V-DMIC-supply = <&ab8500_ldo_dmic_reg>;
 
+					clocks = <&ab8500_clock AB8500_SYSCLK_AUDIO>;
+					clock-names = "audioclk";
+
 					stericsson,earpeice-cmv = <950>; /* Units in mV. */
 				};
 
@@ -1095,6 +1106,14 @@
 			status = "disabled";
 		};
 
+		sound {
+			compatible = "stericsson,snd-soc-mop500";
+			stericsson,cpu-dai = <&msp1 &msp3>;
+			stericsson,audio-codec = <&codec>;
+			clocks = <&prcmu_clk PRCMU_SYSCLK>, <&ab8500_clock AB8500_SYSCLK_ULP>, <&ab8500_clock AB8500_SYSCLK_INT>;
+			clock-names = "sysclk", "ulpclk", "intclk";
+		};
+
 		msp0: msp@80123000 {
 			compatible = "stericsson,ux500-msp-i2s";
 			reg = <0x80123000 0x1000>;

arch/arm/boot/dts/ste-href.dtsi

@@ -186,15 +186,6 @@
 			status = "okay";
 		};
 
-		sound {
-			compatible = "stericsson,snd-soc-mop500";
-
-			stericsson,cpu-dai = <&msp1 &msp3>;
-			stericsson,audio-codec = <&codec>;
-			clocks = <&prcmu_clk PRCMU_SYSCLK>;
-			clock-names = "sysclk";
-		};
-
 		msp0: msp@80123000 {
 			pinctrl-names = "default";
 			pinctrl-0 = <&msp0_default_mode>;

arch/arm/boot/dts/ste-snowball.dts

@@ -159,15 +159,6 @@
 				     "", "", "", "", "", "", "", "";
 		};
 
-		sound {
-			compatible = "stericsson,snd-soc-mop500";
-
-			stericsson,cpu-dai = <&msp1 &msp3>;
-			stericsson,audio-codec = <&codec>;
-			clocks = <&prcmu_clk PRCMU_SYSCLK>;
-			clock-names = "sysclk";
-		};
-
 		msp0: msp@80123000 {
 			pinctrl-names = "default";
 			pinctrl-0 = <&msp0_default_mode>;

arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts

@@ -167,7 +167,7 @@
 					reg = <8>;
 					label = "cpu";
 					ethernet = <&gmac>;
-					phy-mode = "rgmii";
+					phy-mode = "rgmii-txid";
 					fixed-link {
 						speed = <1000>;
 						full-duplex;

arch/arm/boot/dts/sun8i-a23-a33.dtsi

@@ -495,7 +495,7 @@
 			resets = <&ccu RST_BUS_GPU>;
 
 			assigned-clocks = <&ccu CLK_GPU>;
-			assigned-clock-rates = <408000000>;
+			assigned-clock-rates = <384000000>;
 		};
 
 		gic: interrupt-controller@01c81000 {

arch/arm/boot/dts/sun8i-reference-design-tablet.dtsi

@@ -50,8 +50,6 @@
 
 	backlight: backlight {
 		compatible = "pwm-backlight";
-		pinctrl-names = "default";
-		pinctrl-0 = <&bl_en_pin>;
 		pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
 		brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
 		default-brightness-level = <8>;
@@ -93,11 +91,6 @@
 };
 
 &pio {
-	bl_en_pin: bl_en_pin@0 {
-		pins = "PH6";
-		function = "gpio_in";
-	};
-
 	mmc0_cd_pin: mmc0_cd_pin@0 {
 		pins = "PB4";
 		function = "gpio_in";

arch/arm/configs/omap2plus_defconfig

@@ -188,6 +188,7 @@ CONFIG_WL12XX=m
 CONFIG_WL18XX=m
 CONFIG_WLCORE_SPI=m
 CONFIG_WLCORE_SDIO=m
+CONFIG_INPUT_MOUSEDEV=m
 CONFIG_INPUT_JOYDEV=m
 CONFIG_INPUT_EVDEV=m
 CONFIG_KEYBOARD_ATKBD=m

arch/arm/mach-at91/pm.c

@@ -289,6 +289,22 @@ static void at91_ddr_standby(void)
 		at91_ramc_write(1, AT91_DDRSDRC_LPR, saved_lpr1);
 }
 
+static void sama5d3_ddr_standby(void)
+{
+	u32 lpr0;
+	u32 saved_lpr0;
+
+	saved_lpr0 = at91_ramc_read(0, AT91_DDRSDRC_LPR);
+	lpr0 = saved_lpr0 & ~AT91_DDRSDRC_LPCB;
+	lpr0 |= AT91_DDRSDRC_LPCB_POWER_DOWN;
+
+	at91_ramc_write(0, AT91_DDRSDRC_LPR, lpr0);
+
+	cpu_do_idle();
+
+	at91_ramc_write(0, AT91_DDRSDRC_LPR, saved_lpr0);
+}
+
 /* We manage both DDRAM/SDRAM controllers, we need more than one value to
  * remember.
  */
@@ -323,7 +339,7 @@ static const struct of_device_id const ramc_ids[] __initconst = {
 	{ .compatible = "atmel,at91rm9200-sdramc", .data = at91rm9200_standby },
 	{ .compatible = "atmel,at91sam9260-sdramc", .data = at91sam9_sdram_standby },
 	{ .compatible = "atmel,at91sam9g45-ddramc", .data = at91_ddr_standby },
-	{ .compatible = "atmel,sama5d3-ddramc", .data = at91_ddr_standby },
+	{ .compatible = "atmel,sama5d3-ddramc", .data = sama5d3_ddr_standby },
 	{ /*sentinel*/ }
 };
 

arch/arm/mach-omap2/Makefile

@@ -241,6 +241,3 @@ obj-$(CONFIG_MACH_OMAP2_TUSB6010)	+= usb-tusb6010.o
 
 onenand-$(CONFIG_MTD_ONENAND_OMAP2)	:= gpmc-onenand.o
 obj-y					+= $(onenand-m) $(onenand-y)
-
-nand-$(CONFIG_MTD_NAND_OMAP2)		:= gpmc-nand.o
-obj-y					+= $(nand-m) $(nand-y)

arch/arm/mach-omap2/gpmc-nand.c

@@ -1,154 +0,0 @@
-/*
- * gpmc-nand.c
- *
- * Copyright (C) 2009 Texas Instruments
- * Vimal Singh <vimalsingh@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/omap-gpmc.h>
-#include <linux/mtd/nand.h>
-#include <linux/platform_data/mtd-nand-omap2.h>
-
-#include <asm/mach/flash.h>
-
-#include "soc.h"
-
-/* minimum size for IO mapping */
-#define	NAND_IO_SIZE	4
-
-static bool gpmc_hwecc_bch_capable(enum omap_ecc ecc_opt)
-{
-	/* platforms which support all ECC schemes */
-	if (soc_is_am33xx() || soc_is_am43xx() || cpu_is_omap44xx() ||
-		 soc_is_omap54xx() || soc_is_dra7xx())
-		return 1;
-
-	if (ecc_opt == OMAP_ECC_BCH4_CODE_HW_DETECTION_SW ||
-		 ecc_opt == OMAP_ECC_BCH8_CODE_HW_DETECTION_SW) {
-		if (cpu_is_omap24xx())
-			return 0;
-		else if (cpu_is_omap3630() && (GET_OMAP_REVISION() == 0))
-			return 0;
-		else
-			return 1;
-	}
-
-	/* OMAP3xxx do not have ELM engine, so cannot support ECC schemes
-	 * which require H/W based ECC error detection */
-	if ((cpu_is_omap34xx() || cpu_is_omap3630()) &&
-	    ((ecc_opt == OMAP_ECC_BCH4_CODE_HW) ||
-		 (ecc_opt == OMAP_ECC_BCH8_CODE_HW)))
-		return 0;
-
-	/* legacy platforms support only HAM1 (1-bit Hamming) ECC scheme */
-	if (ecc_opt == OMAP_ECC_HAM1_CODE_HW ||
-	    ecc_opt == OMAP_ECC_HAM1_CODE_SW)
-		return 1;
-	else
-		return 0;
-}
-
-/* This function will go away once the device-tree convertion is complete */
-static void gpmc_set_legacy(struct omap_nand_platform_data *gpmc_nand_data,
-			    struct gpmc_settings *s)
-{
-	/* Enable RD PIN Monitoring Reg */
-	if (gpmc_nand_data->dev_ready) {
-		s->wait_on_read = true;
-		s->wait_on_write = true;
-	}
-
-	if (gpmc_nand_data->devsize == NAND_BUSWIDTH_16)
-		s->device_width = GPMC_DEVWIDTH_16BIT;
-	else
-		s->device_width = GPMC_DEVWIDTH_8BIT;
-}
-
-int gpmc_nand_init(struct omap_nand_platform_data *gpmc_nand_data,
-		   struct gpmc_timings *gpmc_t)
-{
-	int err	= 0;
-	struct gpmc_settings s;
-	struct platform_device *pdev;
-	struct resource gpmc_nand_res[] = {
-		{ .flags = IORESOURCE_MEM, },
-		{ .flags = IORESOURCE_IRQ, },
-		{ .flags = IORESOURCE_IRQ, },
-	};
-
-	BUG_ON(gpmc_nand_data->cs >= GPMC_CS_NUM);
-
-	err = gpmc_cs_request(gpmc_nand_data->cs, NAND_IO_SIZE,
-			      (unsigned long *)&gpmc_nand_res[0].start);
-	if (err < 0) {
-		pr_err("omap2-gpmc: Cannot request GPMC CS %d, error %d\n",
-		       gpmc_nand_data->cs, err);
-		return err;
-	}
-	gpmc_nand_res[0].end = gpmc_nand_res[0].start + NAND_IO_SIZE - 1;
-	gpmc_nand_res[1].start = gpmc_get_client_irq(GPMC_IRQ_FIFOEVENTENABLE);
-	gpmc_nand_res[2].start = gpmc_get_client_irq(GPMC_IRQ_COUNT_EVENT);
-
-	memset(&s, 0, sizeof(struct gpmc_settings));
-	gpmc_set_legacy(gpmc_nand_data, &s);
-
-	s.device_nand = true;
-
-	if (gpmc_t) {
-		err = gpmc_cs_set_timings(gpmc_nand_data->cs, gpmc_t, &s);
-		if (err < 0) {
-			pr_err("omap2-gpmc: Unable to set gpmc timings: %d\n",
-			       err);
-			return err;
-		}
-	}
-
-	err = gpmc_cs_program_settings(gpmc_nand_data->cs, &s);
-	if (err < 0)
-		goto out_free_cs;
-
-	err = gpmc_configure(GPMC_CONFIG_WP, 0);
-	if (err < 0)
-		goto out_free_cs;
-
-	if (!gpmc_hwecc_bch_capable(gpmc_nand_data->ecc_opt)) {
-		pr_err("omap2-nand: Unsupported NAND ECC scheme selected\n");
-		err = -EINVAL;
-		goto out_free_cs;
-	}
-
-
-	pdev = platform_device_alloc("omap2-nand", gpmc_nand_data->cs);
-	if (pdev) {
-		err = platform_device_add_resources(pdev, gpmc_nand_res,
-						    ARRAY_SIZE(gpmc_nand_res));
-		if (!err)
-			pdev->dev.platform_data = gpmc_nand_data;
-	} else {
-		err = -ENOMEM;
-	}
-	if (err)
-		goto out_free_pdev;
-
-	err = platform_device_add(pdev);
-	if (err) {
-		dev_err(&pdev->dev, "Unable to register NAND device\n");
-		goto out_free_pdev;
-	}
-
-	return 0;
-
-out_free_pdev:
-	platform_device_put(pdev);
-out_free_cs:
-	gpmc_cs_free(gpmc_nand_data->cs);
-
-	return err;
-}

arch/arm/mach-omap2/gpmc-onenand.c

@@ -367,7 +367,7 @@ static int gpmc_onenand_setup(void __iomem *onenand_base, int *freq_ptr)
 	return ret;
 }
 
-void gpmc_onenand_init(struct omap_onenand_platform_data *_onenand_data)
+int gpmc_onenand_init(struct omap_onenand_platform_data *_onenand_data)
 {
 	int err;
 	struct device *dev = &gpmc_onenand_device.dev;
@@ -393,15 +393,17 @@ void gpmc_onenand_init(struct omap_onenand_platform_data *_onenand_data)
 	if (err < 0) {
 		dev_err(dev, "Cannot request GPMC CS %d, error %d\n",
 			gpmc_onenand_data->cs, err);
-		return;
+		return err;
 	}
 
 	gpmc_onenand_resource.end = gpmc_onenand_resource.start +
 							ONENAND_IO_SIZE - 1;
 
-	if (platform_device_register(&gpmc_onenand_device) < 0) {
+	err = platform_device_register(&gpmc_onenand_device);
+	if (err) {
 		dev_err(dev, "Unable to register OneNAND device\n");
 		gpmc_cs_free(gpmc_onenand_data->cs);
-		return;
 	}
+
+	return err;
 }

arch/arm/mach-omap2/omap-headsmp.S

@@ -17,6 +17,7 @@
 
 #include <linux/linkage.h>
 #include <linux/init.h>
+#include <asm/assembler.h>
 
 #include "omap44xx.h"
 
@@ -66,7 +67,7 @@ wait_2:	ldr	r2, =AUX_CORE_BOOT0_PA	@ read from AuxCoreBoot0
 	cmp	r0, r4
 	bne	wait_2
 	ldr	r12, =API_HYP_ENTRY
-	adr	r0, hyp_boot
+	badr	r0, hyp_boot
 	smc	#0
 hyp_boot:
 	b	omap_secondary_startup

arch/arm/mach-omap2/omap_hwmod_3xxx_data.c

@@ -2112,11 +2112,20 @@ static struct omap_hwmod_ocp_if omap3_l4_core__i2c3 = {
 };
 
 /* L4 CORE -> SR1 interface */
+static struct omap_hwmod_addr_space omap3_sr1_addr_space[] = {
+	{
+		.pa_start	= OMAP34XX_SR1_BASE,
+		.pa_end		= OMAP34XX_SR1_BASE + SZ_1K - 1,
+		.flags		= ADDR_TYPE_RT,
+	},
+	{ },
+};
 
 static struct omap_hwmod_ocp_if omap34xx_l4_core__sr1 = {
 	.master		= &omap3xxx_l4_core_hwmod,
 	.slave		= &omap34xx_sr1_hwmod,
 	.clk		= "sr_l4_ick",
+	.addr		= omap3_sr1_addr_space,
 	.user		= OCP_USER_MPU,
 };
 
@@ -2124,15 +2133,25 @@ static struct omap_hwmod_ocp_if omap36xx_l4_core__sr1 = {
 	.master		= &omap3xxx_l4_core_hwmod,
 	.slave		= &omap36xx_sr1_hwmod,
 	.clk		= "sr_l4_ick",
+	.addr		= omap3_sr1_addr_space,
 	.user		= OCP_USER_MPU,
 };
 
 /* L4 CORE -> SR1 interface */
+static struct omap_hwmod_addr_space omap3_sr2_addr_space[] = {
+	{
+		.pa_start	= OMAP34XX_SR2_BASE,
+		.pa_end		= OMAP34XX_SR2_BASE + SZ_1K - 1,
+		.flags		= ADDR_TYPE_RT,
+	},
+	{ },
+};
 
 static struct omap_hwmod_ocp_if omap34xx_l4_core__sr2 = {
 	.master		= &omap3xxx_l4_core_hwmod,
 	.slave		= &omap34xx_sr2_hwmod,
 	.clk		= "sr_l4_ick",
+	.addr		= omap3_sr2_addr_space,
 	.user		= OCP_USER_MPU,
 };
 
@@ -2140,6 +2159,7 @@ static struct omap_hwmod_ocp_if omap36xx_l4_core__sr2 = {
 	.master		= &omap3xxx_l4_core_hwmod,
 	.slave		= &omap36xx_sr2_hwmod,
 	.clk		= "sr_l4_ick",
+	.addr		= omap3_sr2_addr_space,
 	.user		= OCP_USER_MPU,
 };
 
@@ -3111,16 +3131,20 @@ static struct omap_hwmod_ocp_if *omap3xxx_dss_hwmod_ocp_ifs[] __initdata = {
  * Return: 0 if device named @dev_name is not likely to be accessible,
  * or 1 if it is likely to be accessible.
  */
-static int __init omap3xxx_hwmod_is_hs_ip_block_usable(struct device_node *bus,
-						       const char *dev_name)
+static bool __init omap3xxx_hwmod_is_hs_ip_block_usable(struct device_node *bus,
+							const char *dev_name)
 {
+	struct device_node *node;
+	bool available;
+
 	if (!bus)
-		return (omap_type() == OMAP2_DEVICE_TYPE_GP) ? 1 : 0;
+		return omap_type() == OMAP2_DEVICE_TYPE_GP;
 
-	if (of_device_is_available(of_find_node_by_name(bus, dev_name)))
-		return 1;
+	node = of_get_child_by_name(bus, dev_name);
+	available = of_device_is_available(node);
+	of_node_put(node);
 
-	return 0;
+	return available;
 }
 
 int __init omap3xxx_hwmod_init(void)
@@ -3189,15 +3213,20 @@ int __init omap3xxx_hwmod_init(void)
 
 	if (h_sham && omap3xxx_hwmod_is_hs_ip_block_usable(bus, "sham")) {
 		r = omap_hwmod_register_links(h_sham);
-		if (r < 0)
+		if (r < 0) {
+			of_node_put(bus);
 			return r;
+		}
 	}
 
 	if (h_aes && omap3xxx_hwmod_is_hs_ip_block_usable(bus, "aes")) {
 		r = omap_hwmod_register_links(h_aes);
-		if (r < 0)
+		if (r < 0) {
+			of_node_put(bus);
 			return r;
+		}
 	}
+	of_node_put(bus);
 
 	/*
 	 * Register hwmod links specific to certain ES levels of a

arch/arm/tools/syscall.tbl

@@ -411,3 +411,4 @@
 394	common	pkey_mprotect		sys_pkey_mprotect
 395	common	pkey_alloc		sys_pkey_alloc
 396	common	pkey_free		sys_pkey_free
+397	common	statx			sys_statx

arch/arm64/Kconfig

@@ -1073,6 +1073,10 @@ config SYSVIPC_COMPAT
 	def_bool y
 	depends on COMPAT && SYSVIPC
 
+config KEYS_COMPAT
+	def_bool y
+	depends on COMPAT && KEYS
+
 endmenu
 
 menu "Power management options"

arch/arm64/boot/dts/broadcom/ns2.dtsi

@@ -114,6 +114,7 @@
 	pcie0: pcie@20020000 {
 		compatible = "brcm,iproc-pcie";
 		reg = <0 0x20020000 0 0x1000>;
+		dma-coherent;
 
 		#interrupt-cells = <1>;
 		interrupt-map-mask = <0 0 0 0>;
@@ -144,6 +145,7 @@
 	pcie4: pcie@50020000 {
 		compatible = "brcm,iproc-pcie";
 		reg = <0 0x50020000 0 0x1000>;
+		dma-coherent;
 
 		#interrupt-cells = <1>;
 		interrupt-map-mask = <0 0 0 0>;
@@ -174,6 +176,7 @@
 	pcie8: pcie@60c00000 {
 		compatible = "brcm,iproc-pcie-paxc";
 		reg = <0 0x60c00000 0 0x1000>;
+		dma-coherent;
 		linux,pci-domain = <8>;
 
 		bus-range = <0x0 0x1>;
@@ -203,6 +206,7 @@
 			      <0x61030000 0x100>;
 			reg-names = "amac_base", "idm_base", "nicpm_base";
 			interrupts = <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>;
+			dma-coherent;
 			phy-handle = <&gphy0>;
 			phy-mode = "rgmii";
 			status = "disabled";
@@ -213,6 +217,7 @@
 			reg = <0x612c0000 0x445>;  /* PDC FS0 regs */
 			interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
 			#mbox-cells = <1>;
+			dma-coherent;
 			brcm,rx-status-len = <32>;
 			brcm,use-bcm-hdr;
 		};
@@ -222,6 +227,7 @@
 			reg = <0x612e0000 0x445>;  /* PDC FS1 regs */
 			interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
 			#mbox-cells = <1>;
+			dma-coherent;
 			brcm,rx-status-len = <32>;
 			brcm,use-bcm-hdr;
 		};
@@ -231,6 +237,7 @@
 			reg = <0x61300000 0x445>;  /* PDC FS2 regs */
 			interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
 			#mbox-cells = <1>;
+			dma-coherent;
 			brcm,rx-status-len = <32>;
 			brcm,use-bcm-hdr;
 		};
@@ -240,6 +247,7 @@
 			reg = <0x61320000 0x445>;  /* PDC FS3 regs */
 			interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
 			#mbox-cells = <1>;
+			dma-coherent;
 			brcm,rx-status-len = <32>;
 			brcm,use-bcm-hdr;
 		};
@@ -644,6 +652,7 @@
 		sata: ahci@663f2000 {
 			compatible = "brcm,iproc-ahci", "generic-ahci";
 			reg = <0x663f2000 0x1000>;
+			dma-coherent;
 			reg-names = "ahci";
 			interrupts = <GIC_SPI 438 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
@@ -667,6 +676,7 @@
 			compatible = "brcm,sdhci-iproc-cygnus";
 			reg = <0x66420000 0x100>;
 			interrupts = <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>;
+			dma-coherent;
 			bus-width = <8>;
 			clocks = <&genpll_sw BCM_NS2_GENPLL_SW_SDIO_CLK>;
 			status = "disabled";
@@ -676,6 +686,7 @@
 			compatible = "brcm,sdhci-iproc-cygnus";
 			reg = <0x66430000 0x100>;
 			interrupts = <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>;
+			dma-coherent;
 			bus-width = <8>;
 			clocks = <&genpll_sw BCM_NS2_GENPLL_SW_SDIO_CLK>;
 			status = "disabled";

arch/arm64/include/asm/cpufeature.h

@@ -251,7 +251,7 @@ static inline bool system_supports_fpsimd(void)
 static inline bool system_uses_ttbr0_pan(void)
 {
 	return IS_ENABLED(CONFIG_ARM64_SW_TTBR0_PAN) &&
-		!cpus_have_cap(ARM64_HAS_PAN);
+		!cpus_have_const_cap(ARM64_HAS_PAN);
 }
 
 #endif /* __ASSEMBLY__ */

arch/arm64/include/asm/unistd.h

@@ -44,7 +44,7 @@
 #define __ARM_NR_compat_cacheflush	(__ARM_NR_COMPAT_BASE+2)
 #define __ARM_NR_compat_set_tls		(__ARM_NR_COMPAT_BASE+5)
 
-#define __NR_compat_syscalls		394
+#define __NR_compat_syscalls		398
 #endif
 
 #define __ARCH_WANT_SYS_CLONE

arch/arm64/include/asm/unistd32.h

@@ -809,6 +809,14 @@ __SYSCALL(__NR_copy_file_range, sys_copy_file_range)
 __SYSCALL(__NR_preadv2, compat_sys_preadv2)
 #define __NR_pwritev2 393
 __SYSCALL(__NR_pwritev2, compat_sys_pwritev2)
+#define __NR_pkey_mprotect 394
+__SYSCALL(__NR_pkey_mprotect, sys_pkey_mprotect)
+#define __NR_pkey_alloc 395
+__SYSCALL(__NR_pkey_alloc, sys_pkey_alloc)
+#define __NR_pkey_free 396
+__SYSCALL(__NR_pkey_free, sys_pkey_free)
+#define __NR_statx 397
+__SYSCALL(__NR_statx, sys_statx)
 
 /*
  * Please add new compat syscalls above this comment and update

arch/arm64/kernel/cpuidle.c

@@ -30,7 +30,7 @@ int arm_cpuidle_init(unsigned int cpu)
 }
 
 /**
- * cpu_suspend() - function to enter a low-power idle state
+ * arm_cpuidle_suspend() - function to enter a low-power idle state
  * @arg: argument to pass to CPU suspend operations
  *
  * Return: 0 on success, -EOPNOTSUPP if CPU suspend hook not initialized, CPU

arch/arm64/kernel/kaslr.c

@@ -131,11 +131,15 @@ u64 __init kaslr_early_init(u64 dt_phys, u64 modulo_offset)
 	/*
 	 * The kernel Image should not extend across a 1GB/32MB/512MB alignment
 	 * boundary (for 4KB/16KB/64KB granule kernels, respectively). If this
-	 * happens, increase the KASLR offset by the size of the kernel image.
+	 * happens, increase the KASLR offset by the size of the kernel image
+	 * rounded up by SWAPPER_BLOCK_SIZE.
 	 */
 	if ((((u64)_text + offset + modulo_offset) >> SWAPPER_TABLE_SHIFT) !=
-	    (((u64)_end + offset + modulo_offset) >> SWAPPER_TABLE_SHIFT))
-		offset = (offset + (u64)(_end - _text)) & mask;
+	    (((u64)_end + offset + modulo_offset) >> SWAPPER_TABLE_SHIFT)) {
+		u64 kimg_sz = _end - _text;
+		offset = (offset + round_up(kimg_sz, SWAPPER_BLOCK_SIZE))
+				& mask;
+	}
 
 	if (IS_ENABLED(CONFIG_KASAN))
 		/*

arch/arm64/kernel/probes/kprobes.c

@@ -372,12 +372,6 @@ int __kprobes kprobe_fault_handler(struct pt_regs *regs, unsigned int fsr)
 	return 0;
 }
 
-int __kprobes kprobe_exceptions_notify(struct notifier_block *self,
-				       unsigned long val, void *data)
-{
-	return NOTIFY_DONE;
-}
-
 static void __kprobes kprobe_handler(struct pt_regs *regs)
 {
 	struct kprobe *p, *cur_kprobe;

arch/arm64/mm/kasan_init.c

@@ -162,7 +162,7 @@ void __init kasan_init(void)
 	clear_pgds(KASAN_SHADOW_START, KASAN_SHADOW_END);
 
 	vmemmap_populate(kimg_shadow_start, kimg_shadow_end,
-			 pfn_to_nid(virt_to_pfn(_text)));
+			 pfn_to_nid(virt_to_pfn(lm_alias(_text))));
 
 	/*
 	 * vmemmap_populate() has populated the shadow region that covers the

arch/m68k/configs/amiga_defconfig

@@ -25,6 +25,7 @@ CONFIG_SUN_PARTITION=y
 # CONFIG_EFI_PARTITION is not set
 CONFIG_SYSV68_PARTITION=y
 CONFIG_IOSCHED_DEADLINE=m
+CONFIG_MQ_IOSCHED_DEADLINE=m
 CONFIG_KEXEC=y
 CONFIG_BOOTINFO_PROC=y
 CONFIG_M68020=y
@@ -60,6 +61,7 @@ CONFIG_NET_IPVTI=m
 CONFIG_NET_FOU_IP_TUNNELS=y
 CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
+CONFIG_INET_ESP_OFFLOAD=m
 CONFIG_INET_IPCOMP=m
 CONFIG_INET_XFRM_MODE_TRANSPORT=m
 CONFIG_INET_XFRM_MODE_TUNNEL=m
@@ -71,6 +73,7 @@ CONFIG_IPV6=m
 CONFIG_IPV6_ROUTER_PREF=y
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
+CONFIG_INET6_ESP_OFFLOAD=m
 CONFIG_INET6_IPCOMP=m
 CONFIG_IPV6_ILA=m
 CONFIG_IPV6_VTI=m
@@ -101,6 +104,7 @@ CONFIG_NFT_NUMGEN=m
 CONFIG_NFT_CT=m
 CONFIG_NFT_SET_RBTREE=m
 CONFIG_NFT_SET_HASH=m
+CONFIG_NFT_SET_BITMAP=m
 CONFIG_NFT_COUNTER=m
 CONFIG_NFT_LOG=m
 CONFIG_NFT_LIMIT=m
@@ -298,6 +302,8 @@ CONFIG_MPLS_IPTUNNEL=m
 CONFIG_NET_L3_MASTER_DEV=y
 CONFIG_AF_KCM=m
 # CONFIG_WIRELESS is not set
+CONFIG_PSAMPLE=m
+CONFIG_NET_IFE=m
 CONFIG_NET_DEVLINK=m
 # CONFIG_UEVENT_HELPER is not set
 CONFIG_DEVTMPFS=y
@@ -371,6 +377,7 @@ CONFIG_NET_TEAM_MODE_LOADBALANCE=m
 CONFIG_MACVLAN=m
 CONFIG_MACVTAP=m
 CONFIG_IPVLAN=m
+CONFIG_IPVTAP=m
 CONFIG_VXLAN=m
 CONFIG_GENEVE=m
 CONFIG_GTP=m
@@ -383,6 +390,7 @@ CONFIG_VETH=m
 # CONFIG_NET_VENDOR_AMAZON is not set
 CONFIG_A2065=y
 CONFIG_ARIADNE=y
+# CONFIG_NET_VENDOR_AQUANTIA is not set
 # CONFIG_NET_VENDOR_ARC is not set
 # CONFIG_NET_CADENCE is not set
 # CONFIG_NET_VENDOR_BROADCOM is not set
@@ -404,7 +412,6 @@ CONFIG_ZORRO8390=y
 # CONFIG_NET_VENDOR_SOLARFLARE is not set
 # CONFIG_NET_VENDOR_SMSC is not set
 # CONFIG_NET_VENDOR_STMICRO is not set
-# CONFIG_NET_VENDOR_SYNOPSYS is not set
 # CONFIG_NET_VENDOR_VIA is not set
 # CONFIG_NET_VENDOR_WIZNET is not set
 CONFIG_PPP=m
@@ -564,6 +571,8 @@ CONFIG_NLS_MAC_TURKISH=m
 CONFIG_DLM=m
 # CONFIG_SECTION_MISMATCH_WARN_ONLY is not set
 CONFIG_MAGIC_SYSRQ=y
+CONFIG_WW_MUTEX_SELFTEST=m
+CONFIG_ATOMIC64_SELFTEST=m
 CONFIG_ASYNC_RAID6_TEST=m
 CONFIG_TEST_HEXDUMP=m
 CONFIG_TEST_STRING_HELPERS=m
@@ -594,6 +603,7 @@ CONFIG_CRYPTO_CHACHA20POLY1305=m
 CONFIG_CRYPTO_LRW=m
 CONFIG_CRYPTO_PCBC=m
 CONFIG_CRYPTO_KEYWRAP=m
+CONFIG_CRYPTO_CMAC=m
 CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_VMAC=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
@@ -605,6 +615,7 @@ CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_SHA3=m
 CONFIG_CRYPTO_TGR192=m
 CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_AES_TI=m
 CONFIG_CRYPTO_ANUBIS=m
 CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_CAMELLIA=m
@@ -629,4 +640,5 @@ CONFIG_CRYPTO_USER_API_SKCIPHER=m
 CONFIG_CRYPTO_USER_API_RNG=m
 CONFIG_CRYPTO_USER_API_AEAD=m
 # CONFIG_CRYPTO_HW is not set
+CONFIG_CRC32_SELFTEST=m
 CONFIG_XZ_DEC_TEST=m

arch/m68k/configs/apollo_defconfig

@@ -26,6 +26,7 @@ CONFIG_SUN_PARTITION=y
 # CONFIG_EFI_PARTITION is not set
 CONFIG_SYSV68_PARTITION=y
 CONFIG_IOSCHED_DEADLINE=m
+CONFIG_MQ_IOSCHED_DEADLINE=m
 CONFIG_KEXEC=y
 CONFIG_BOOTINFO_PROC=y
 CONFIG_M68020=y
@@ -58,6 +59,7 @@ CONFIG_NET_IPVTI=m
 CONFIG_NET_FOU_IP_TUNNELS=y
 CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
+CONFIG_INET_ESP_OFFLOAD=m
 CONFIG_INET_IPCOMP=m
 CONFIG_INET_XFRM_MODE_TRANSPORT=m
 CONFIG_INET_XFRM_MODE_TUNNEL=m
@@ -69,6 +71,7 @@ CONFIG_IPV6=m
 CONFIG_IPV6_ROUTER_PREF=y
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
+CONFIG_INET6_ESP_OFFLOAD=m
 CONFIG_INET6_IPCOMP=m
 CONFIG_IPV6_ILA=m
 CONFIG_IPV6_VTI=m
@@ -99,6 +102,7 @@ CONFIG_NFT_NUMGEN=m
 CONFIG_NFT_CT=m
 CONFIG_NFT_SET_RBTREE=m
 CONFIG_NFT_SET_HASH=m
+CONFIG_NFT_SET_BITMAP=m
 CONFIG_NFT_COUNTER=m
 CONFIG_NFT_LOG=m
 CONFIG_NFT_LIMIT=m
@@ -296,6 +300,8 @@ CONFIG_MPLS_IPTUNNEL=m
 CONFIG_NET_L3_MASTER_DEV=y
 CONFIG_AF_KCM=m
 # CONFIG_WIRELESS is not set
+CONFIG_PSAMPLE=m
+CONFIG_NET_IFE=m
 CONFIG_NET_DEVLINK=m
 # CONFIG_UEVENT_HELPER is not set
 CONFIG_DEVTMPFS=y
@@ -353,6 +359,7 @@ CONFIG_NET_TEAM_MODE_LOADBALANCE=m
 CONFIG_MACVLAN=m
 CONFIG_MACVTAP=m
 CONFIG_IPVLAN=m
+CONFIG_IPVTAP=m
 CONFIG_VXLAN=m
 CONFIG_GENEVE=m
 CONFIG_GTP=m
@@ -362,6 +369,7 @@ CONFIG_NETCONSOLE_DYNAMIC=y
 CONFIG_VETH=m
 # CONFIG_NET_VENDOR_ALACRITECH is not set
 # CONFIG_NET_VENDOR_AMAZON is not set
+# CONFIG_NET_VENDOR_AQUANTIA is not set
 # CONFIG_NET_VENDOR_ARC is not set
 # CONFIG_NET_CADENCE is not set
 # CONFIG_NET_VENDOR_BROADCOM is not set
@@ -378,7 +386,6 @@ CONFIG_VETH=m
 # CONFIG_NET_VENDOR_SEEQ is not set
 # CONFIG_NET_VENDOR_SOLARFLARE is not set
 # CONFIG_NET_VENDOR_STMICRO is not set
-# CONFIG_NET_VENDOR_SYNOPSYS is not set
 # CONFIG_NET_VENDOR_VIA is not set
 # CONFIG_NET_VENDOR_WIZNET is not set
 CONFIG_PPP=m
@@ -523,6 +530,8 @@ CONFIG_NLS_MAC_TURKISH=m
 CONFIG_DLM=m
 # CONFIG_SECTION_MISMATCH_WARN_ONLY is not set
 CONFIG_MAGIC_SYSRQ=y
+CONFIG_WW_MUTEX_SELFTEST=m
+CONFIG_ATOMIC64_SELFTEST=m
 CONFIG_ASYNC_RAID6_TEST=m
 CONFIG_TEST_HEXDUMP=m
 CONFIG_TEST_STRING_HELPERS=m
@@ -553,6 +562,7 @@ CONFIG_CRYPTO_CHACHA20POLY1305=m
 CONFIG_CRYPTO_LRW=m
 CONFIG_CRYPTO_PCBC=m
 CONFIG_CRYPTO_KEYWRAP=m
+CONFIG_CRYPTO_CMAC=m
 CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_VMAC=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
@@ -564,6 +574,7 @@ CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_SHA3=m
 CONFIG_CRYPTO_TGR192=m
 CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_AES_TI=m
 CONFIG_CRYPTO_ANUBIS=m
 CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_CAMELLIA=m
@@ -588,4 +599,5 @@ CONFIG_CRYPTO_USER_API_SKCIPHER=m
 CONFIG_CRYPTO_USER_API_RNG=m
 CONFIG_CRYPTO_USER_API_AEAD=m
 # CONFIG_CRYPTO_HW is not set
+CONFIG_CRC32_SELFTEST=m
 CONFIG_XZ_DEC_TEST=m

arch/m68k/configs/atari_defconfig

@@ -25,6 +25,7 @@ CONFIG_SUN_PARTITION=y
 # CONFIG_EFI_PARTITION is not set
 CONFIG_SYSV68_PARTITION=y
 CONFIG_IOSCHED_DEADLINE=m
+CONFIG_MQ_IOSCHED_DEADLINE=m
 CONFIG_KEXEC=y
 CONFIG_BOOTINFO_PROC=y
 CONFIG_M68020=y
@@ -58,6 +59,7 @@ CONFIG_NET_IPVTI=m
 CONFIG_NET_FOU_IP_TUNNELS=y
 CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
+CONFIG_INET_ESP_OFFLOAD=m
 CONFIG_INET_IPCOMP=m
 CONFIG_INET_XFRM_MODE_TRANSPORT=m
 CONFIG_INET_XFRM_MODE_TUNNEL=m
@@ -69,6 +71,7 @@ CONFIG_IPV6=m
 CONFIG_IPV6_ROUTER_PREF=y
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
+CONFIG_INET6_ESP_OFFLOAD=m
 CONFIG_INET6_IPCOMP=m
 CONFIG_IPV6_ILA=m
 CONFIG_IPV6_VTI=m
@@ -99,6 +102,7 @@ CONFIG_NFT_NUMGEN=m
 CONFIG_NFT_CT=m
 CONFIG_NFT_SET_RBTREE=m
 CONFIG_NFT_SET_HASH=m
+CONFIG_NFT_SET_BITMAP=m
 CONFIG_NFT_COUNTER=m
 CONFIG_NFT_LOG=m
 CONFIG_NFT_LIMIT=m
@@ -296,6 +300,8 @@ CONFIG_MPLS_IPTUNNEL=m
 CONFIG_NET_L3_MASTER_DEV=y
 CONFIG_AF_KCM=m
 # CONFIG_WIRELESS is not set
+CONFIG_PSAMPLE=m
+CONFIG_NET_IFE=m
 CONFIG_NET_DEVLINK=m
 # CONFIG_UEVENT_HELPER is not set
 CONFIG_DEVTMPFS=y
@@ -362,6 +368,7 @@ CONFIG_NET_TEAM_MODE_LOADBALANCE=m
 CONFIG_MACVLAN=m
 CONFIG_MACVTAP=m
 CONFIG_IPVLAN=m
+CONFIG_IPVTAP=m
 CONFIG_VXLAN=m
 CONFIG_GENEVE=m
 CONFIG_GTP=m
@@ -372,6 +379,7 @@ CONFIG_VETH=m
 # CONFIG_NET_VENDOR_ALACRITECH is not set
 # CONFIG_NET_VENDOR_AMAZON is not set
 CONFIG_ATARILANCE=y
+# CONFIG_NET_VENDOR_AQUANTIA is not set
 # CONFIG_NET_VENDOR_ARC is not set
 # CONFIG_NET_CADENCE is not set
 # CONFIG_NET_VENDOR_BROADCOM is not set
@@ -389,7 +397,6 @@ CONFIG_NE2000=y
 # CONFIG_NET_VENDOR_SOLARFLARE is not set
 CONFIG_SMC91X=y
 # CONFIG_NET_VENDOR_STMICRO is not set
-# CONFIG_NET_VENDOR_SYNOPSYS is not set
 # CONFIG_NET_VENDOR_VIA is not set
 # CONFIG_NET_VENDOR_WIZNET is not set
 CONFIG_PPP=m
@@ -544,6 +551,8 @@ CONFIG_NLS_MAC_TURKISH=m
 CONFIG_DLM=m
 # CONFIG_SECTION_MISMATCH_WARN_ONLY is not set
 CONFIG_MAGIC_SYSRQ=y
+CONFIG_WW_MUTEX_SELFTEST=m
+CONFIG_ATOMIC64_SELFTEST=m
 CONFIG_ASYNC_RAID6_TEST=m
 CONFIG_TEST_HEXDUMP=m
 CONFIG_TEST_STRING_HELPERS=m
@@ -574,6 +583,7 @@ CONFIG_CRYPTO_CHACHA20POLY1305=m
 CONFIG_CRYPTO_LRW=m
 CONFIG_CRYPTO_PCBC=m
 CONFIG_CRYPTO_KEYWRAP=m
+CONFIG_CRYPTO_CMAC=m
 CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_VMAC=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
@@ -585,6 +595,7 @@ CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_SHA3=m
 CONFIG_CRYPTO_TGR192=m
 CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_AES_TI=m
 CONFIG_CRYPTO_ANUBIS=m
 CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_CAMELLIA=m
@@ -609,4 +620,5 @@ CONFIG_CRYPTO_USER_API_SKCIPHER=m
 CONFIG_CRYPTO_USER_API_RNG=m
 CONFIG_CRYPTO_USER_API_AEAD=m
 # CONFIG_CRYPTO_HW is not set
+CONFIG_CRC32_SELFTEST=m
 CONFIG_XZ_DEC_TEST=m

arch/m68k/configs/bvme6000_defconfig

@@ -25,6 +25,7 @@ CONFIG_UNIXWARE_DISKLABEL=y
 CONFIG_SUN_PARTITION=y
 # CONFIG_EFI_PARTITION is not set
 CONFIG_IOSCHED_DEADLINE=m
+CONFIG_MQ_IOSCHED_DEADLINE=m
 CONFIG_KEXEC=y
 CONFIG_BOOTINFO_PROC=y
 CONFIG_M68040=y
@@ -56,6 +57,7 @@ CONFIG_NET_IPVTI=m
 CONFIG_NET_FOU_IP_TUNNELS=y
 CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
+CONFIG_INET_ESP_OFFLOAD=m
 CONFIG_INET_IPCOMP=m
 CONFIG_INET_XFRM_MODE_TRANSPORT=m
 CONFIG_INET_XFRM_MODE_TUNNEL=m
@@ -67,6 +69,7 @@ CONFIG_IPV6=m
 CONFIG_IPV6_ROUTER_PREF=y
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
+CONFIG_INET6_ESP_OFFLOAD=m
 CONFIG_INET6_IPCOMP=m
 CONFIG_IPV6_ILA=m
 CONFIG_IPV6_VTI=m
@@ -97,6 +100,7 @@ CONFIG_NFT_NUMGEN=m
 CONFIG_NFT_CT=m
 CONFIG_NFT_SET_RBTREE=m
 CONFIG_NFT_SET_HASH=m
+CONFIG_NFT_SET_BITMAP=m
 CONFIG_NFT_COUNTER=m
 CONFIG_NFT_LOG=m
 CONFIG_NFT_LIMIT=m
@@ -294,6 +298,8 @@ CONFIG_MPLS_IPTUNNEL=m
 CONFIG_NET_L3_MASTER_DEV=y
 CONFIG_AF_KCM=m
 # CONFIG_WIRELESS is not set
+CONFIG_PSAMPLE=m
+CONFIG_NET_IFE=m
 CONFIG_NET_DEVLINK=m
 # CONFIG_UEVENT_HELPER is not set
 CONFIG_DEVTMPFS=y
@@ -352,6 +358,7 @@ CONFIG_NET_TEAM_MODE_LOADBALANCE=m
 CONFIG_MACVLAN=m
 CONFIG_MACVTAP=m
 CONFIG_IPVLAN=m
+CONFIG_IPVTAP=m
 CONFIG_VXLAN=m
 CONFIG_GENEVE=m
 CONFIG_GTP=m
@@ -361,6 +368,7 @@ CONFIG_NETCONSOLE_DYNAMIC=y
 CONFIG_VETH=m
 # CONFIG_NET_VENDOR_ALACRITECH is not set
 # CONFIG_NET_VENDOR_AMAZON is not set
+# CONFIG_NET_VENDOR_AQUANTIA is not set
 # CONFIG_NET_VENDOR_ARC is not set
 # CONFIG_NET_CADENCE is not set
 # CONFIG_NET_VENDOR_BROADCOM is not set
@@ -377,7 +385,6 @@ CONFIG_BVME6000_NET=y
 # CONFIG_NET_VENDOR_SEEQ is not set
 # CONFIG_NET_VENDOR_SOLARFLARE is not set
 # CONFIG_NET_VENDOR_STMICRO is not set
-# CONFIG_NET_VENDOR_SYNOPSYS is not set
 # CONFIG_NET_VENDOR_VIA is not set
 # CONFIG_NET_VENDOR_WIZNET is not set
 CONFIG_PPP=m
@@ -515,6 +522,8 @@ CONFIG_NLS_MAC_TURKISH=m
 CONFIG_DLM=m
 # CONFIG_SECTION_MISMATCH_WARN_ONLY is not set
 CONFIG_MAGIC_SYSRQ=y
+CONFIG_WW_MUTEX_SELFTEST=m
+CONFIG_ATOMIC64_SELFTEST=m
 CONFIG_ASYNC_RAID6_TEST=m
 CONFIG_TEST_HEXDUMP=m
 CONFIG_TEST_STRING_HELPERS=m
@@ -545,6 +554,7 @@ CONFIG_CRYPTO_CHACHA20POLY1305=m
 CONFIG_CRYPTO_LRW=m
 CONFIG_CRYPTO_PCBC=m
 CONFIG_CRYPTO_KEYWRAP=m
+CONFIG_CRYPTO_CMAC=m
 CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_VMAC=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
@@ -556,6 +566,7 @@ CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_SHA3=m
 CONFIG_CRYPTO_TGR192=m
 CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_AES_TI=m
 CONFIG_CRYPTO_ANUBIS=m
 CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_CAMELLIA=m
@@ -580,4 +591,5 @@ CONFIG_CRYPTO_USER_API_SKCIPHER=m
 CONFIG_CRYPTO_USER_API_RNG=m
 CONFIG_CRYPTO_USER_API_AEAD=m
 # CONFIG_CRYPTO_HW is not set
+CONFIG_CRC32_SELFTEST=m
 CONFIG_XZ_DEC_TEST=m

arch/m68k/configs/hp300_defconfig

@@ -26,6 +26,7 @@ CONFIG_SUN_PARTITION=y
 # CONFIG_EFI_PARTITION is not set
 CONFIG_SYSV68_PARTITION=y
 CONFIG_IOSCHED_DEADLINE=m
+CONFIG_MQ_IOSCHED_DEADLINE=m
 CONFIG_KEXEC=y
 CONFIG_BOOTINFO_PROC=y
 CONFIG_M68020=y
@@ -58,6 +59,7 @@ CONFIG_NET_IPVTI=m
 CONFIG_NET_FOU_IP_TUNNELS=y
 CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
+CONFIG_INET_ESP_OFFLOAD=m
 CONFIG_INET_IPCOMP=m
 CONFIG_INET_XFRM_MODE_TRANSPORT=m
 CONFIG_INET_XFRM_MODE_TUNNEL=m
@@ -69,6 +71,7 @@ CONFIG_IPV6=m
 CONFIG_IPV6_ROUTER_PREF=y
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
+CONFIG_INET6_ESP_OFFLOAD=m
 CONFIG_INET6_IPCOMP=m
 CONFIG_IPV6_ILA=m
 CONFIG_IPV6_VTI=m
@@ -99,6 +102,7 @@ CONFIG_NFT_NUMGEN=m
 CONFIG_NFT_CT=m
 CONFIG_NFT_SET_RBTREE=m
 CONFIG_NFT_SET_HASH=m
+CONFIG_NFT_SET_BITMAP=m
 CONFIG_NFT_COUNTER=m
 CONFIG_NFT_LOG=m
 CONFIG_NFT_LIMIT=m
@@ -296,6 +300,8 @@ CONFIG_MPLS_IPTUNNEL=m
 CONFIG_NET_L3_MASTER_DEV=y
 CONFIG_AF_KCM=m
 # CONFIG_WIRELESS is not set
+CONFIG_PSAMPLE=m
+CONFIG_NET_IFE=m
 CONFIG_NET_DEVLINK=m
 # CONFIG_UEVENT_HELPER is not set
 CONFIG_DEVTMPFS=y
@@ -353,6 +359,7 @@ CONFIG_NET_TEAM_MODE_LOADBALANCE=m
 CONFIG_MACVLAN=m
 CONFIG_MACVTAP=m
 CONFIG_IPVLAN=m
+CONFIG_IPVTAP=m
 CONFIG_VXLAN=m
 CONFIG_GENEVE=m
 CONFIG_GTP=m
@@ -363,6 +370,7 @@ CONFIG_VETH=m
 # CONFIG_NET_VENDOR_ALACRITECH is not set
 # CONFIG_NET_VENDOR_AMAZON is not set
 CONFIG_HPLANCE=y
+# CONFIG_NET_VENDOR_AQUANTIA is not set
 # CONFIG_NET_VENDOR_ARC is not set
 # CONFIG_NET_CADENCE is not set
 # CONFIG_NET_VENDOR_BROADCOM is not set
@@ -379,7 +387,6 @@ CONFIG_HPLANCE=y
 # CONFIG_NET_VENDOR_SEEQ is not set
 # CONFIG_NET_VENDOR_SOLARFLARE is not set
 # CONFIG_NET_VENDOR_STMICRO is not set
-# CONFIG_NET_VENDOR_SYNOPSYS is not set
 # CONFIG_NET_VENDOR_VIA is not set
 # CONFIG_NET_VENDOR_WIZNET is not set
 CONFIG_PPP=m
@@ -525,6 +532,8 @@ CONFIG_NLS_MAC_TURKISH=m
 CONFIG_DLM=m
 # CONFIG_SECTION_MISMATCH_WARN_ONLY is not set
 CONFIG_MAGIC_SYSRQ=y
+CONFIG_WW_MUTEX_SELFTEST=m
+CONFIG_ATOMIC64_SELFTEST=m
 CONFIG_ASYNC_RAID6_TEST=m
 CONFIG_TEST_HEXDUMP=m
 CONFIG_TEST_STRING_HELPERS=m
@@ -555,6 +564,7 @@ CONFIG_CRYPTO_CHACHA20POLY1305=m
 CONFIG_CRYPTO_LRW=m
 CONFIG_CRYPTO_PCBC=m
 CONFIG_CRYPTO_KEYWRAP=m
+CONFIG_CRYPTO_CMAC=m
 CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_VMAC=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
@@ -566,6 +576,7 @@ CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_SHA3=m
 CONFIG_CRYPTO_TGR192=m
 CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_AES_TI=m
 CONFIG_CRYPTO_ANUBIS=m
 CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_CAMELLIA=m
@@ -590,4 +601,5 @@ CONFIG_CRYPTO_USER_API_SKCIPHER=m
 CONFIG_CRYPTO_USER_API_RNG=m
 CONFIG_CRYPTO_USER_API_AEAD=m
 # CONFIG_CRYPTO_HW is not set
+CONFIG_CRC32_SELFTEST=m
 CONFIG_XZ_DEC_TEST=m

arch/m68k/configs/mac_defconfig

@@ -25,6 +25,7 @@ CONFIG_SUN_PARTITION=y
 # CONFIG_EFI_PARTITION is not set
 CONFIG_SYSV68_PARTITION=y
 CONFIG_IOSCHED_DEADLINE=m
+CONFIG_MQ_IOSCHED_DEADLINE=m
 CONFIG_KEXEC=y
 CONFIG_BOOTINFO_PROC=y
 CONFIG_M68020=y
@@ -57,6 +58,7 @@ CONFIG_NET_IPVTI=m
 CONFIG_NET_FOU_IP_TUNNELS=y
 CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
+CONFIG_INET_ESP_OFFLOAD=m
 CONFIG_INET_IPCOMP=m
 CONFIG_INET_XFRM_MODE_TRANSPORT=m
 CONFIG_INET_XFRM_MODE_TUNNEL=m
@@ -68,6 +70,7 @@ CONFIG_IPV6=m
 CONFIG_IPV6_ROUTER_PREF=y
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
+CONFIG_INET6_ESP_OFFLOAD=m
 CONFIG_INET6_IPCOMP=m
 CONFIG_IPV6_ILA=m
 CONFIG_IPV6_VTI=m
@@ -98,6 +101,7 @@ CONFIG_NFT_NUMGEN=m
 CONFIG_NFT_CT=m
 CONFIG_NFT_SET_RBTREE=m
 CONFIG_NFT_SET_HASH=m
+CONFIG_NFT_SET_BITMAP=m
 CONFIG_NFT_COUNTER=m
 CONFIG_NFT_LOG=m
 CONFIG_NFT_LIMIT=m
@@ -298,6 +302,8 @@ CONFIG_MPLS_IPTUNNEL=m
 CONFIG_NET_L3_MASTER_DEV=y
 CONFIG_AF_KCM=m
 # CONFIG_WIRELESS is not set
+CONFIG_PSAMPLE=m
+CONFIG_NET_IFE=m
 CONFIG_NET_DEVLINK=m
 # CONFIG_UEVENT_HELPER is not set
 CONFIG_DEVTMPFS=y
@@ -369,6 +375,7 @@ CONFIG_NET_TEAM_MODE_LOADBALANCE=m
 CONFIG_MACVLAN=m
 CONFIG_MACVTAP=m
 CONFIG_IPVLAN=m
+CONFIG_IPVTAP=m
 CONFIG_VXLAN=m
 CONFIG_GENEVE=m
 CONFIG_GTP=m
@@ -379,6 +386,7 @@ CONFIG_VETH=m
 # CONFIG_NET_VENDOR_ALACRITECH is not set
 # CONFIG_NET_VENDOR_AMAZON is not set
 CONFIG_MACMACE=y
+# CONFIG_NET_VENDOR_AQUANTIA is not set
 # CONFIG_NET_VENDOR_ARC is not set
 # CONFIG_NET_CADENCE is not set
 # CONFIG_NET_VENDOR_BROADCOM is not set
@@ -398,7 +406,6 @@ CONFIG_MAC8390=y
 # CONFIG_NET_VENDOR_SOLARFLARE is not set
 # CONFIG_NET_VENDOR_SMSC is not set
 # CONFIG_NET_VENDOR_STMICRO is not set
-# CONFIG_NET_VENDOR_SYNOPSYS is not set
 # CONFIG_NET_VENDOR_VIA is not set
 # CONFIG_NET_VENDOR_WIZNET is not set
 CONFIG_PPP=m
@@ -547,6 +554,8 @@ CONFIG_NLS_MAC_TURKISH=m
 CONFIG_DLM=m
 # CONFIG_SECTION_MISMATCH_WARN_ONLY is not set
 CONFIG_MAGIC_SYSRQ=y
+CONFIG_WW_MUTEX_SELFTEST=m
+CONFIG_ATOMIC64_SELFTEST=m
 CONFIG_ASYNC_RAID6_TEST=m
 CONFIG_TEST_HEXDUMP=m
 CONFIG_TEST_STRING_HELPERS=m
@@ -577,6 +586,7 @@ CONFIG_CRYPTO_CHACHA20POLY1305=m
 CONFIG_CRYPTO_LRW=m
 CONFIG_CRYPTO_PCBC=m
 CONFIG_CRYPTO_KEYWRAP=m
+CONFIG_CRYPTO_CMAC=m
 CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_VMAC=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
@@ -588,6 +598,7 @@ CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_SHA3=m
 CONFIG_CRYPTO_TGR192=m
 CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_AES_TI=m
 CONFIG_CRYPTO_ANUBIS=m
 CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_CAMELLIA=m
@@ -612,4 +623,5 @@ CONFIG_CRYPTO_USER_API_SKCIPHER=m
 CONFIG_CRYPTO_USER_API_RNG=m
 CONFIG_CRYPTO_USER_API_AEAD=m
 # CONFIG_CRYPTO_HW is not set
+CONFIG_CRC32_SELFTEST=m
 CONFIG_XZ_DEC_TEST=m

arch/m68k/configs/multi_defconfig

@@ -21,6 +21,7 @@ CONFIG_SOLARIS_X86_PARTITION=y
 CONFIG_UNIXWARE_DISKLABEL=y
 # CONFIG_EFI_PARTITION is not set
 CONFIG_IOSCHED_DEADLINE=m
+CONFIG_MQ_IOSCHED_DEADLINE=m
 CONFIG_KEXEC=y
 CONFIG_BOOTINFO_PROC=y
 CONFIG_M68020=y
@@ -67,6 +68,7 @@ CONFIG_NET_IPVTI=m
 CONFIG_NET_FOU_IP_TUNNELS=y
 CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
+CONFIG_INET_ESP_OFFLOAD=m
 CONFIG_INET_IPCOMP=m
 CONFIG_INET_XFRM_MODE_TRANSPORT=m
 CONFIG_INET_XFRM_MODE_TUNNEL=m
@@ -78,6 +80,7 @@ CONFIG_IPV6=m
 CONFIG_IPV6_ROUTER_PREF=y
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
+CONFIG_INET6_ESP_OFFLOAD=m
 CONFIG_INET6_IPCOMP=m
 CONFIG_IPV6_ILA=m
 CONFIG_IPV6_VTI=m
@@ -108,6 +111,7 @@ CONFIG_NFT_NUMGEN=m
 CONFIG_NFT_CT=m
 CONFIG_NFT_SET_RBTREE=m
 CONFIG_NFT_SET_HASH=m
+CONFIG_NFT_SET_BITMAP=m
 CONFIG_NFT_COUNTER=m
 CONFIG_NFT_LOG=m
 CONFIG_NFT_LIMIT=m
@@ -308,6 +312,8 @@ CONFIG_MPLS_IPTUNNEL=m
 CONFIG_NET_L3_MASTER_DEV=y
 CONFIG_AF_KCM=m
 # CONFIG_WIRELESS is not set
+CONFIG_PSAMPLE=m
+CONFIG_NET_IFE=m
 CONFIG_NET_DEVLINK=m
 # CONFIG_UEVENT_HELPER is not set
 CONFIG_DEVTMPFS=y
@@ -402,6 +408,7 @@ CONFIG_NET_TEAM_MODE_LOADBALANCE=m
 CONFIG_MACVLAN=m
 CONFIG_MACVTAP=m
 CONFIG_IPVLAN=m
+CONFIG_IPVTAP=m
 CONFIG_VXLAN=m
 CONFIG_GENEVE=m
 CONFIG_GTP=m
@@ -419,6 +426,7 @@ CONFIG_HPLANCE=y
 CONFIG_MVME147_NET=y
 CONFIG_SUN3LANCE=y
 CONFIG_MACMACE=y
+# CONFIG_NET_VENDOR_AQUANTIA is not set
 # CONFIG_NET_VENDOR_ARC is not set
 # CONFIG_NET_CADENCE is not set
 # CONFIG_NET_VENDOR_BROADCOM is not set
@@ -444,7 +452,6 @@ CONFIG_ZORRO8390=y
 # CONFIG_NET_VENDOR_SOLARFLARE is not set
 CONFIG_SMC91X=y
 # CONFIG_NET_VENDOR_STMICRO is not set
-# CONFIG_NET_VENDOR_SYNOPSYS is not set
 # CONFIG_NET_VENDOR_VIA is not set
 # CONFIG_NET_VENDOR_WIZNET is not set
 CONFIG_PLIP=m
@@ -627,6 +634,8 @@ CONFIG_NLS_MAC_TURKISH=m
 CONFIG_DLM=m
 # CONFIG_SECTION_MISMATCH_WARN_ONLY is not set
 CONFIG_MAGIC_SYSRQ=y
+CONFIG_WW_MUTEX_SELFTEST=m
+CONFIG_ATOMIC64_SELFTEST=m
 CONFIG_ASYNC_RAID6_TEST=m
 CONFIG_TEST_HEXDUMP=m
 CONFIG_TEST_STRING_HELPERS=m
@@ -657,6 +666,7 @@ CONFIG_CRYPTO_CHACHA20POLY1305=m
 CONFIG_CRYPTO_LRW=m
 CONFIG_CRYPTO_PCBC=m
 CONFIG_CRYPTO_KEYWRAP=m
+CONFIG_CRYPTO_CMAC=m
 CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_VMAC=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
@@ -668,6 +678,7 @@ CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_SHA3=m
 CONFIG_CRYPTO_TGR192=m
 CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_AES_TI=m
 CONFIG_CRYPTO_ANUBIS=m
 CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_CAMELLIA=m
@@ -692,4 +703,5 @@ CONFIG_CRYPTO_USER_API_SKCIPHER=m
 CONFIG_CRYPTO_USER_API_RNG=m
 CONFIG_CRYPTO_USER_API_AEAD=m
 # CONFIG_CRYPTO_HW is not set
+CONFIG_CRC32_SELFTEST=m
 CONFIG_XZ_DEC_TEST=m

arch/m68k/configs/mvme147_defconfig

@@ -25,6 +25,7 @@ CONFIG_UNIXWARE_DISKLABEL=y
 CONFIG_SUN_PARTITION=y
 # CONFIG_EFI_PARTITION is not set
 CONFIG_IOSCHED_DEADLINE=m
+CONFIG_MQ_IOSCHED_DEADLINE=m
 CONFIG_KEXEC=y
 CONFIG_BOOTINFO_PROC=y
 CONFIG_M68030=y
@@ -55,6 +56,7 @@ CONFIG_NET_IPVTI=m
 CONFIG_NET_FOU_IP_TUNNELS=y
 CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
+CONFIG_INET_ESP_OFFLOAD=m
 CONFIG_INET_IPCOMP=m
 CONFIG_INET_XFRM_MODE_TRANSPORT=m
 CONFIG_INET_XFRM_MODE_TUNNEL=m
@@ -66,6 +68,7 @@ CONFIG_IPV6=m
 CONFIG_IPV6_ROUTER_PREF=y
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
+CONFIG_INET6_ESP_OFFLOAD=m
 CONFIG_INET6_IPCOMP=m
 CONFIG_IPV6_ILA=m
 CONFIG_IPV6_VTI=m
@@ -96,6 +99,7 @@ CONFIG_NFT_NUMGEN=m
 CONFIG_NFT_CT=m
 CONFIG_NFT_SET_RBTREE=m
 CONFIG_NFT_SET_HASH=m
+CONFIG_NFT_SET_BITMAP=m
 CONFIG_NFT_COUNTER=m
 CONFIG_NFT_LOG=m
 CONFIG_NFT_LIMIT=m
@@ -293,6 +297,8 @@ CONFIG_MPLS_IPTUNNEL=m
 CONFIG_NET_L3_MASTER_DEV=y
 CONFIG_AF_KCM=m
 # CONFIG_WIRELESS is not set
+CONFIG_PSAMPLE=m
+CONFIG_NET_IFE=m
 CONFIG_NET_DEVLINK=m
 # CONFIG_UEVENT_HELPER is not set
 CONFIG_DEVTMPFS=y
@@ -351,6 +357,7 @@ CONFIG_NET_TEAM_MODE_LOADBALANCE=m
 CONFIG_MACVLAN=m
 CONFIG_MACVTAP=m
 CONFIG_IPVLAN=m
+CONFIG_IPVTAP=m
 CONFIG_VXLAN=m
 CONFIG_GENEVE=m
 CONFIG_GTP=m
@@ -361,6 +368,7 @@ CONFIG_VETH=m
 # CONFIG_NET_VENDOR_ALACRITECH is not set
 # CONFIG_NET_VENDOR_AMAZON is not set
 CONFIG_MVME147_NET=y
+# CONFIG_NET_VENDOR_AQUANTIA is not set
 # CONFIG_NET_VENDOR_ARC is not set
 # CONFIG_NET_CADENCE is not set
 # CONFIG_NET_VENDOR_BROADCOM is not set
@@ -377,7 +385,6 @@ CONFIG_MVME147_NET=y
 # CONFIG_NET_VENDOR_SEEQ is not set
 # CONFIG_NET_VENDOR_SOLARFLARE is not set
 # CONFIG_NET_VENDOR_STMICRO is not set
-# CONFIG_NET_VENDOR_SYNOPSYS is not set
 # CONFIG_NET_VENDOR_VIA is not set
 # CONFIG_NET_VENDOR_WIZNET is not set
 CONFIG_PPP=m
@@ -515,6 +522,8 @@ CONFIG_NLS_MAC_TURKISH=m
 CONFIG_DLM=m
 # CONFIG_SECTION_MISMATCH_WARN_ONLY is not set
 CONFIG_MAGIC_SYSRQ=y
+CONFIG_WW_MUTEX_SELFTEST=m
+CONFIG_ATOMIC64_SELFTEST=m
 CONFIG_ASYNC_RAID6_TEST=m
 CONFIG_TEST_HEXDUMP=m
 CONFIG_TEST_STRING_HELPERS=m
@@ -545,6 +554,7 @@ CONFIG_CRYPTO_CHACHA20POLY1305=m
 CONFIG_CRYPTO_LRW=m
 CONFIG_CRYPTO_PCBC=m
 CONFIG_CRYPTO_KEYWRAP=m
+CONFIG_CRYPTO_CMAC=m
 CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_VMAC=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
@@ -556,6 +566,7 @@ CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_SHA3=m
 CONFIG_CRYPTO_TGR192=m
 CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_AES_TI=m
 CONFIG_CRYPTO_ANUBIS=m
 CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_CAMELLIA=m
@@ -580,4 +591,5 @@ CONFIG_CRYPTO_USER_API_SKCIPHER=m
 CONFIG_CRYPTO_USER_API_RNG=m
 CONFIG_CRYPTO_USER_API_AEAD=m
 # CONFIG_CRYPTO_HW is not set
+CONFIG_CRC32_SELFTEST=m
 CONFIG_XZ_DEC_TEST=m

arch/m68k/configs/mvme16x_defconfig

@@ -25,6 +25,7 @@ CONFIG_UNIXWARE_DISKLABEL=y
 CONFIG_SUN_PARTITION=y
 # CONFIG_EFI_PARTITION is not set
 CONFIG_IOSCHED_DEADLINE=m
+CONFIG_MQ_IOSCHED_DEADLINE=m
 CONFIG_KEXEC=y
 CONFIG_BOOTINFO_PROC=y
 CONFIG_M68040=y
@@ -56,6 +57,7 @@ CONFIG_NET_IPVTI=m
 CONFIG_NET_FOU_IP_TUNNELS=y
 CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
+CONFIG_INET_ESP_OFFLOAD=m
 CONFIG_INET_IPCOMP=m
 CONFIG_INET_XFRM_MODE_TRANSPORT=m
 CONFIG_INET_XFRM_MODE_TUNNEL=m
@@ -67,6 +69,7 @@ CONFIG_IPV6=m
 CONFIG_IPV6_ROUTER_PREF=y
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
+CONFIG_INET6_ESP_OFFLOAD=m
 CONFIG_INET6_IPCOMP=m
 CONFIG_IPV6_ILA=m
 CONFIG_IPV6_VTI=m
@@ -97,6 +100,7 @@ CONFIG_NFT_NUMGEN=m
 CONFIG_NFT_CT=m
 CONFIG_NFT_SET_RBTREE=m
 CONFIG_NFT_SET_HASH=m
+CONFIG_NFT_SET_BITMAP=m
 CONFIG_NFT_COUNTER=m
 CONFIG_NFT_LOG=m
 CONFIG_NFT_LIMIT=m
@@ -294,6 +298,8 @@ CONFIG_MPLS_IPTUNNEL=m
 CONFIG_NET_L3_MASTER_DEV=y
 CONFIG_AF_KCM=m
 # CONFIG_WIRELESS is not set
+CONFIG_PSAMPLE=m
+CONFIG_NET_IFE=m
 CONFIG_NET_DEVLINK=m
 # CONFIG_UEVENT_HELPER is not set
 CONFIG_DEVTMPFS=y
@@ -352,6 +358,7 @@ CONFIG_NET_TEAM_MODE_LOADBALANCE=m
 CONFIG_MACVLAN=m
 CONFIG_MACVTAP=m
 CONFIG_IPVLAN=m
+CONFIG_IPVTAP=m
 CONFIG_VXLAN=m
 CONFIG_GENEVE=m
 CONFIG_GTP=m
@@ -361,6 +368,7 @@ CONFIG_NETCONSOLE_DYNAMIC=y
 CONFIG_VETH=m
 # CONFIG_NET_VENDOR_ALACRITECH is not set
 # CONFIG_NET_VENDOR_AMAZON is not set
+# CONFIG_NET_VENDOR_AQUANTIA is not set
 # CONFIG_NET_VENDOR_ARC is not set
 # CONFIG_NET_CADENCE is not set
 # CONFIG_NET_VENDOR_BROADCOM is not set
@@ -377,7 +385,6 @@ CONFIG_MVME16x_NET=y
 # CONFIG_NET_VENDOR_SEEQ is not set
 # CONFIG_NET_VENDOR_SOLARFLARE is not set
 # CONFIG_NET_VENDOR_STMICRO is not set
-# CONFIG_NET_VENDOR_SYNOPSYS is not set
 # CONFIG_NET_VENDOR_VIA is not set
 # CONFIG_NET_VENDOR_WIZNET is not set
 CONFIG_PPP=m
@@ -515,6 +522,8 @@ CONFIG_NLS_MAC_TURKISH=m
 CONFIG_DLM=m
 # CONFIG_SECTION_MISMATCH_WARN_ONLY is not set
 CONFIG_MAGIC_SYSRQ=y
+CONFIG_WW_MUTEX_SELFTEST=m
+CONFIG_ATOMIC64_SELFTEST=m
 CONFIG_ASYNC_RAID6_TEST=m
 CONFIG_TEST_HEXDUMP=m
 CONFIG_TEST_STRING_HELPERS=m
@@ -545,6 +554,7 @@ CONFIG_CRYPTO_CHACHA20POLY1305=m
 CONFIG_CRYPTO_LRW=m
 CONFIG_CRYPTO_PCBC=m
 CONFIG_CRYPTO_KEYWRAP=m
+CONFIG_CRYPTO_CMAC=m
 CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_VMAC=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
@@ -556,6 +566,7 @@ CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_SHA3=m
 CONFIG_CRYPTO_TGR192=m
 CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_AES_TI=m
 CONFIG_CRYPTO_ANUBIS=m
 CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_CAMELLIA=m
@@ -580,4 +591,5 @@ CONFIG_CRYPTO_USER_API_SKCIPHER=m
 CONFIG_CRYPTO_USER_API_RNG=m
 CONFIG_CRYPTO_USER_API_AEAD=m
 # CONFIG_CRYPTO_HW is not set
+CONFIG_CRC32_SELFTEST=m
 CONFIG_XZ_DEC_TEST=m

arch/m68k/configs/q40_defconfig

@@ -26,6 +26,7 @@ CONFIG_SUN_PARTITION=y
 # CONFIG_EFI_PARTITION is not set
 CONFIG_SYSV68_PARTITION=y
 CONFIG_IOSCHED_DEADLINE=m
+CONFIG_MQ_IOSCHED_DEADLINE=m
 CONFIG_KEXEC=y
 CONFIG_BOOTINFO_PROC=y
 CONFIG_M68040=y
@@ -56,6 +57,7 @@ CONFIG_NET_IPVTI=m
 CONFIG_NET_FOU_IP_TUNNELS=y
 CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
+CONFIG_INET_ESP_OFFLOAD=m
 CONFIG_INET_IPCOMP=m
 CONFIG_INET_XFRM_MODE_TRANSPORT=m
 CONFIG_INET_XFRM_MODE_TUNNEL=m
@@ -67,6 +69,7 @@ CONFIG_IPV6=m
 CONFIG_IPV6_ROUTER_PREF=y
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
+CONFIG_INET6_ESP_OFFLOAD=m
 CONFIG_INET6_IPCOMP=m
 CONFIG_IPV6_ILA=m
 CONFIG_IPV6_VTI=m
@@ -97,6 +100,7 @@ CONFIG_NFT_NUMGEN=m
 CONFIG_NFT_CT=m
 CONFIG_NFT_SET_RBTREE=m
 CONFIG_NFT_SET_HASH=m
+CONFIG_NFT_SET_BITMAP=m
 CONFIG_NFT_COUNTER=m
 CONFIG_NFT_LOG=m
 CONFIG_NFT_LIMIT=m
@@ -294,6 +298,8 @@ CONFIG_MPLS_IPTUNNEL=m
 CONFIG_NET_L3_MASTER_DEV=y
 CONFIG_AF_KCM=m
 # CONFIG_WIRELESS is not set
+CONFIG_PSAMPLE=m
+CONFIG_NET_IFE=m
 CONFIG_NET_DEVLINK=m
 # CONFIG_UEVENT_HELPER is not set
 CONFIG_DEVTMPFS=y
@@ -358,6 +364,7 @@ CONFIG_NET_TEAM_MODE_LOADBALANCE=m
 CONFIG_MACVLAN=m
 CONFIG_MACVTAP=m
 CONFIG_IPVLAN=m
+CONFIG_IPVTAP=m
 CONFIG_VXLAN=m
 CONFIG_GENEVE=m
 CONFIG_GTP=m
@@ -369,6 +376,7 @@ CONFIG_VETH=m
 # CONFIG_NET_VENDOR_ALACRITECH is not set
 # CONFIG_NET_VENDOR_AMAZON is not set
 # CONFIG_NET_VENDOR_AMD is not set
+# CONFIG_NET_VENDOR_AQUANTIA is not set
 # CONFIG_NET_VENDOR_ARC is not set
 # CONFIG_NET_CADENCE is not set
 # CONFIG_NET_VENDOR_BROADCOM is not set
@@ -388,7 +396,6 @@ CONFIG_NE2000=y
 # CONFIG_NET_VENDOR_SOLARFLARE is not set
 # CONFIG_NET_VENDOR_SMSC is not set
 # CONFIG_NET_VENDOR_STMICRO is not set
-# CONFIG_NET_VENDOR_SYNOPSYS is not set
 # CONFIG_NET_VENDOR_VIA is not set
 # CONFIG_NET_VENDOR_WIZNET is not set
 CONFIG_PLIP=m
@@ -538,6 +545,8 @@ CONFIG_NLS_MAC_TURKISH=m
 CONFIG_DLM=m
 # CONFIG_SECTION_MISMATCH_WARN_ONLY is not set
 CONFIG_MAGIC_SYSRQ=y
+CONFIG_WW_MUTEX_SELFTEST=m
+CONFIG_ATOMIC64_SELFTEST=m
 CONFIG_ASYNC_RAID6_TEST=m
 CONFIG_TEST_HEXDUMP=m
 CONFIG_TEST_STRING_HELPERS=m
@@ -568,6 +577,7 @@ CONFIG_CRYPTO_CHACHA20POLY1305=m
 CONFIG_CRYPTO_LRW=m
 CONFIG_CRYPTO_PCBC=m
 CONFIG_CRYPTO_KEYWRAP=m
+CONFIG_CRYPTO_CMAC=m
 CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_VMAC=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
@@ -579,6 +589,7 @@ CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_SHA3=m
 CONFIG_CRYPTO_TGR192=m
 CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_AES_TI=m
 CONFIG_CRYPTO_ANUBIS=m
 CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_CAMELLIA=m
@@ -603,4 +614,5 @@ CONFIG_CRYPTO_USER_API_SKCIPHER=m
 CONFIG_CRYPTO_USER_API_RNG=m
 CONFIG_CRYPTO_USER_API_AEAD=m
 # CONFIG_CRYPTO_HW is not set
+CONFIG_CRC32_SELFTEST=m
 CONFIG_XZ_DEC_TEST=m

arch/m68k/configs/sun3_defconfig

@@ -25,6 +25,7 @@ CONFIG_UNIXWARE_DISKLABEL=y
 # CONFIG_EFI_PARTITION is not set
 CONFIG_SYSV68_PARTITION=y
 CONFIG_IOSCHED_DEADLINE=m
+CONFIG_MQ_IOSCHED_DEADLINE=m
 CONFIG_KEXEC=y
 CONFIG_BOOTINFO_PROC=y
 CONFIG_SUN3=y
@@ -53,6 +54,7 @@ CONFIG_NET_IPVTI=m
 CONFIG_NET_FOU_IP_TUNNELS=y
 CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
+CONFIG_INET_ESP_OFFLOAD=m
 CONFIG_INET_IPCOMP=m
 CONFIG_INET_XFRM_MODE_TRANSPORT=m
 CONFIG_INET_XFRM_MODE_TUNNEL=m
@@ -64,6 +66,7 @@ CONFIG_IPV6=m
 CONFIG_IPV6_ROUTER_PREF=y
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
+CONFIG_INET6_ESP_OFFLOAD=m
 CONFIG_INET6_IPCOMP=m
 CONFIG_IPV6_ILA=m
 CONFIG_IPV6_VTI=m
@@ -94,6 +97,7 @@ CONFIG_NFT_NUMGEN=m
 CONFIG_NFT_CT=m
 CONFIG_NFT_SET_RBTREE=m
 CONFIG_NFT_SET_HASH=m
+CONFIG_NFT_SET_BITMAP=m
 CONFIG_NFT_COUNTER=m
 CONFIG_NFT_LOG=m
 CONFIG_NFT_LIMIT=m
@@ -291,6 +295,8 @@ CONFIG_MPLS_IPTUNNEL=m
 CONFIG_NET_L3_MASTER_DEV=y
 CONFIG_AF_KCM=m
 # CONFIG_WIRELESS is not set
+CONFIG_PSAMPLE=m
+CONFIG_NET_IFE=m
 CONFIG_NET_DEVLINK=m
 # CONFIG_UEVENT_HELPER is not set
 CONFIG_DEVTMPFS=y
@@ -349,6 +355,7 @@ CONFIG_NET_TEAM_MODE_LOADBALANCE=m
 CONFIG_MACVLAN=m
 CONFIG_MACVTAP=m
 CONFIG_IPVLAN=m
+CONFIG_IPVTAP=m
 CONFIG_VXLAN=m
 CONFIG_GENEVE=m
 CONFIG_GTP=m
@@ -359,6 +366,7 @@ CONFIG_VETH=m
 # CONFIG_NET_VENDOR_ALACRITECH is not set
 # CONFIG_NET_VENDOR_AMAZON is not set
 CONFIG_SUN3LANCE=y
+# CONFIG_NET_VENDOR_AQUANTIA is not set
 # CONFIG_NET_VENDOR_ARC is not set
 # CONFIG_NET_CADENCE is not set
 # CONFIG_NET_VENDOR_EZCHIP is not set
@@ -375,7 +383,6 @@ CONFIG_SUN3_82586=y
 # CONFIG_NET_VENDOR_SOLARFLARE is not set
 # CONFIG_NET_VENDOR_STMICRO is not set
 # CONFIG_NET_VENDOR_SUN is not set
-# CONFIG_NET_VENDOR_SYNOPSYS is not set
 # CONFIG_NET_VENDOR_VIA is not set
 # CONFIG_NET_VENDOR_WIZNET is not set
 CONFIG_PPP=m
@@ -517,6 +524,8 @@ CONFIG_NLS_MAC_TURKISH=m
 CONFIG_DLM=m
 # CONFIG_SECTION_MISMATCH_WARN_ONLY is not set
 CONFIG_MAGIC_SYSRQ=y
+CONFIG_WW_MUTEX_SELFTEST=m
+CONFIG_ATOMIC64_SELFTEST=m
 CONFIG_ASYNC_RAID6_TEST=m
 CONFIG_TEST_HEXDUMP=m
 CONFIG_TEST_STRING_HELPERS=m
@@ -546,6 +555,7 @@ CONFIG_CRYPTO_CHACHA20POLY1305=m
 CONFIG_CRYPTO_LRW=m
 CONFIG_CRYPTO_PCBC=m
 CONFIG_CRYPTO_KEYWRAP=m
+CONFIG_CRYPTO_CMAC=m
 CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_VMAC=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
@@ -557,6 +567,7 @@ CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_SHA3=m
 CONFIG_CRYPTO_TGR192=m
 CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_AES_TI=m
 CONFIG_CRYPTO_ANUBIS=m
 CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_CAMELLIA=m
@@ -581,4 +592,5 @@ CONFIG_CRYPTO_USER_API_SKCIPHER=m
 CONFIG_CRYPTO_USER_API_RNG=m
 CONFIG_CRYPTO_USER_API_AEAD=m
 # CONFIG_CRYPTO_HW is not set
+CONFIG_CRC32_SELFTEST=m
 CONFIG_XZ_DEC_TEST=m

arch/m68k/configs/sun3x_defconfig

@@ -25,6 +25,7 @@ CONFIG_UNIXWARE_DISKLABEL=y
 # CONFIG_EFI_PARTITION is not set
 CONFIG_SYSV68_PARTITION=y
 CONFIG_IOSCHED_DEADLINE=m
+CONFIG_MQ_IOSCHED_DEADLINE=m
 CONFIG_KEXEC=y
 CONFIG_BOOTINFO_PROC=y
 CONFIG_SUN3X=y
@@ -53,6 +54,7 @@ CONFIG_NET_IPVTI=m
 CONFIG_NET_FOU_IP_TUNNELS=y
 CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
+CONFIG_INET_ESP_OFFLOAD=m
 CONFIG_INET_IPCOMP=m
 CONFIG_INET_XFRM_MODE_TRANSPORT=m
 CONFIG_INET_XFRM_MODE_TUNNEL=m
@@ -64,6 +66,7 @@ CONFIG_IPV6=m
 CONFIG_IPV6_ROUTER_PREF=y
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
+CONFIG_INET6_ESP_OFFLOAD=m
 CONFIG_INET6_IPCOMP=m
 CONFIG_IPV6_ILA=m
 CONFIG_IPV6_VTI=m
@@ -94,6 +97,7 @@ CONFIG_NFT_NUMGEN=m
 CONFIG_NFT_CT=m
 CONFIG_NFT_SET_RBTREE=m
 CONFIG_NFT_SET_HASH=m
+CONFIG_NFT_SET_BITMAP=m
 CONFIG_NFT_COUNTER=m
 CONFIG_NFT_LOG=m
 CONFIG_NFT_LIMIT=m
@@ -291,6 +295,8 @@ CONFIG_MPLS_IPTUNNEL=m
 CONFIG_NET_L3_MASTER_DEV=y
 CONFIG_AF_KCM=m
 # CONFIG_WIRELESS is not set
+CONFIG_PSAMPLE=m
+CONFIG_NET_IFE=m
 CONFIG_NET_DEVLINK=m
 # CONFIG_UEVENT_HELPER is not set
 CONFIG_DEVTMPFS=y
@@ -349,6 +355,7 @@ CONFIG_NET_TEAM_MODE_LOADBALANCE=m
 CONFIG_MACVLAN=m
 CONFIG_MACVTAP=m
 CONFIG_IPVLAN=m
+CONFIG_IPVTAP=m
 CONFIG_VXLAN=m
 CONFIG_GENEVE=m
 CONFIG_GTP=m
@@ -359,6 +366,7 @@ CONFIG_VETH=m
 # CONFIG_NET_VENDOR_ALACRITECH is not set
 # CONFIG_NET_VENDOR_AMAZON is not set
 CONFIG_SUN3LANCE=y
+# CONFIG_NET_VENDOR_AQUANTIA is not set
 # CONFIG_NET_VENDOR_ARC is not set
 # CONFIG_NET_CADENCE is not set
 # CONFIG_NET_VENDOR_BROADCOM is not set
@@ -375,7 +383,6 @@ CONFIG_SUN3LANCE=y
 # CONFIG_NET_VENDOR_SEEQ is not set
 # CONFIG_NET_VENDOR_SOLARFLARE is not set
 # CONFIG_NET_VENDOR_STMICRO is not set
-# CONFIG_NET_VENDOR_SYNOPSYS is not set
 # CONFIG_NET_VENDOR_VIA is not set
 # CONFIG_NET_VENDOR_WIZNET is not set
 CONFIG_PPP=m
@@ -517,6 +524,8 @@ CONFIG_NLS_MAC_TURKISH=m
 CONFIG_DLM=m
 # CONFIG_SECTION_MISMATCH_WARN_ONLY is not set
 CONFIG_MAGIC_SYSRQ=y
+CONFIG_WW_MUTEX_SELFTEST=m
+CONFIG_ATOMIC64_SELFTEST=m
 CONFIG_ASYNC_RAID6_TEST=m
 CONFIG_TEST_HEXDUMP=m
 CONFIG_TEST_STRING_HELPERS=m
@@ -547,6 +556,7 @@ CONFIG_CRYPTO_CHACHA20POLY1305=m
 CONFIG_CRYPTO_LRW=m
 CONFIG_CRYPTO_PCBC=m
 CONFIG_CRYPTO_KEYWRAP=m
+CONFIG_CRYPTO_CMAC=m
 CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_VMAC=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
@@ -558,6 +568,7 @@ CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_SHA3=m
 CONFIG_CRYPTO_TGR192=m
 CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_AES_TI=m
 CONFIG_CRYPTO_ANUBIS=m
 CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_CAMELLIA=m
@@ -582,4 +593,5 @@ CONFIG_CRYPTO_USER_API_SKCIPHER=m
 CONFIG_CRYPTO_USER_API_RNG=m
 CONFIG_CRYPTO_USER_API_AEAD=m
 # CONFIG_CRYPTO_HW is not set
+CONFIG_CRC32_SELFTEST=m
 CONFIG_XZ_DEC_TEST=m

arch/m68k/include/asm/bitops.h

@@ -148,7 +148,7 @@ static inline void bfchg_mem_change_bit(int nr, volatile unsigned long *vaddr)
 #define __change_bit(nr, vaddr)	change_bit(nr, vaddr)
 
 
-static inline int test_bit(int nr, const unsigned long *vaddr)
+static inline int test_bit(int nr, const volatile unsigned long *vaddr)
 {
 	return (vaddr[nr >> 5] & (1UL << (nr & 31))) != 0;
 }

arch/m68k/include/asm/unistd.h

@@ -4,7 +4,7 @@
 #include <uapi/asm/unistd.h>
 
 
-#define NR_syscalls		379
+#define NR_syscalls		380
 
 #define __ARCH_WANT_OLD_READDIR
 #define __ARCH_WANT_OLD_STAT

arch/m68k/include/uapi/asm/unistd.h

@@ -384,5 +384,6 @@
 #define __NR_copy_file_range	376
 #define __NR_preadv2		377
 #define __NR_pwritev2		378
+#define __NR_statx		379
 
 #endif /* _UAPI_ASM_M68K_UNISTD_H_ */

arch/m68k/kernel/syscalltable.S

@@ -399,3 +399,4 @@ ENTRY(sys_call_table)
 	.long sys_copy_file_range
 	.long sys_preadv2
 	.long sys_pwritev2
+	.long sys_statx

arch/openrisc/include/asm/cmpxchg.h

@@ -77,7 +77,11 @@ static inline unsigned long __xchg(unsigned long val, volatile void *ptr,
 	return val;
 }
 
-#define xchg(ptr, with) \
-	((typeof(*(ptr)))__xchg((unsigned long)(with), (ptr), sizeof(*(ptr))))
+#define xchg(ptr, with) 						\
+	({								\
+		(__typeof__(*(ptr))) __xchg((unsigned long)(with),	\
+					    (ptr),			\
+					    sizeof(*(ptr)));		\
+	})
 
 #endif /* __ASM_OPENRISC_CMPXCHG_H */

arch/openrisc/include/asm/uaccess.h

@@ -211,7 +211,7 @@ do {									\
 	case 1: __get_user_asm(x, ptr, retval, "l.lbz"); break;		\
 	case 2: __get_user_asm(x, ptr, retval, "l.lhz"); break;		\
 	case 4: __get_user_asm(x, ptr, retval, "l.lwz"); break;		\
-	case 8: __get_user_asm2(x, ptr, retval);			\
+	case 8: __get_user_asm2(x, ptr, retval); break;			\
 	default: (x) = __get_user_bad();				\
 	}								\
 } while (0)

arch/openrisc/kernel/or32_ksyms.c

@@ -30,6 +30,7 @@
 #include <asm/hardirq.h>
 #include <asm/delay.h>
 #include <asm/pgalloc.h>
+#include <asm/pgtable.h>
 
 #define DECLARE_EXPORT(name) extern void name(void); EXPORT_SYMBOL(name)
 
@@ -42,6 +43,9 @@ DECLARE_EXPORT(__muldi3);
 DECLARE_EXPORT(__ashrdi3);
 DECLARE_EXPORT(__ashldi3);
 DECLARE_EXPORT(__lshrdi3);
+DECLARE_EXPORT(__ucmpdi2);
 
+EXPORT_SYMBOL(empty_zero_page);
 EXPORT_SYMBOL(__copy_tofrom_user);
+EXPORT_SYMBOL(__clear_user);
 EXPORT_SYMBOL(memset);

arch/openrisc/kernel/process.c

@@ -90,6 +90,7 @@ void arch_cpu_idle(void)
 }
 
 void (*pm_power_off) (void) = machine_power_off;
+EXPORT_SYMBOL(pm_power_off);
 
 /*
  * When a process does an "exec", machine state like FPU and debug

arch/parisc/include/asm/cacheflush.h

@@ -43,28 +43,9 @@ static inline void flush_kernel_dcache_page(struct page *page)
 
 #define flush_kernel_dcache_range(start,size) \
 	flush_kernel_dcache_range_asm((start), (start)+(size));
-/* vmap range flushes and invalidates.  Architecturally, we don't need
- * the invalidate, because the CPU should refuse to speculate once an
- * area has been flushed, so invalidate is left empty */
-static inline void flush_kernel_vmap_range(void *vaddr, int size)
-{
-	unsigned long start = (unsigned long)vaddr;
-
-	flush_kernel_dcache_range_asm(start, start + size);
-}
-static inline void invalidate_kernel_vmap_range(void *vaddr, int size)
-{
-	unsigned long start = (unsigned long)vaddr;
-	void *cursor = vaddr;
 
-	for ( ; cursor < vaddr + size; cursor += PAGE_SIZE) {
-		struct page *page = vmalloc_to_page(cursor);
-
-		if (test_and_clear_bit(PG_dcache_dirty, &page->flags))
-			flush_kernel_dcache_page(page);
-	}
-	flush_kernel_dcache_range_asm(start, start + size);
-}
+void flush_kernel_vmap_range(void *vaddr, int size);
+void invalidate_kernel_vmap_range(void *vaddr, int size);
 
 #define flush_cache_vmap(start, end)		flush_cache_all()
 #define flush_cache_vunmap(start, end)		flush_cache_all()

arch/parisc/include/asm/uaccess.h

@@ -32,7 +32,8 @@
  * that put_user is the same as __put_user, etc.
  */
 
-#define access_ok(type, uaddr, size) (1)
+#define access_ok(type, uaddr, size)	\
+	( (uaddr) == (uaddr) )
 
 #define put_user __put_user
 #define get_user __get_user

arch/parisc/include/uapi/asm/unistd.h

@@ -362,8 +362,9 @@
 #define __NR_copy_file_range	(__NR_Linux + 346)
 #define __NR_preadv2		(__NR_Linux + 347)
 #define __NR_pwritev2		(__NR_Linux + 348)
+#define __NR_statx		(__NR_Linux + 349)
 
-#define __NR_Linux_syscalls	(__NR_pwritev2 + 1)
+#define __NR_Linux_syscalls	(__NR_statx + 1)
 
 
 #define __IGNORE_select		/* newselect */

arch/parisc/kernel/cache.c

@@ -616,3 +616,25 @@ flush_cache_page(struct vm_area_struct *vma, unsigned long vmaddr, unsigned long
 		__flush_cache_page(vma, vmaddr, PFN_PHYS(pfn));
 	}
 }
+
+void flush_kernel_vmap_range(void *vaddr, int size)
+{
+	unsigned long start = (unsigned long)vaddr;
+
+	if ((unsigned long)size > parisc_cache_flush_threshold)
+		flush_data_cache();
+	else
+		flush_kernel_dcache_range_asm(start, start + size);
+}
+EXPORT_SYMBOL(flush_kernel_vmap_range);
+
+void invalidate_kernel_vmap_range(void *vaddr, int size)
+{
+	unsigned long start = (unsigned long)vaddr;
+
+	if ((unsigned long)size > parisc_cache_flush_threshold)
+		flush_data_cache();
+	else
+		flush_kernel_dcache_range_asm(start, start + size);
+}
+EXPORT_SYMBOL(invalidate_kernel_vmap_range);

arch/parisc/kernel/module.c

@@ -620,6 +620,10 @@ int apply_relocate_add(Elf_Shdr *sechdrs,
 			 */
 			*loc = fsel(val, addend); 
 			break;
+		case R_PARISC_SECREL32:
+			/* 32-bit section relative address. */
+			*loc = fsel(val, addend);
+			break;
 		case R_PARISC_DPREL21L:
 			/* left 21 bit of relative address */
 			val = lrsel(val - dp, addend);
@@ -807,6 +811,10 @@ int apply_relocate_add(Elf_Shdr *sechdrs,
 			 */
 			*loc = fsel(val, addend); 
 			break;
+		case R_PARISC_SECREL32:
+			/* 32-bit section relative address. */
+			*loc = fsel(val, addend);
+			break;
 		case R_PARISC_FPTR64:
 			/* 64-bit function address */
 			if(in_local(me, (void *)(val + addend))) {

arch/parisc/kernel/perf.c

@@ -39,7 +39,7 @@
  *  the PDC INTRIGUE calls.  This is done to eliminate bugs introduced
  *  in various PDC revisions.  The code is much more maintainable
  *  and reliable this way vs having to debug on every version of PDC
- *  on every box. 
+ *  on every box.
  */
 
 #include <linux/capability.h>
@@ -195,8 +195,8 @@ static int perf_config(uint32_t *image_ptr);
 static int perf_release(struct inode *inode, struct file *file);
 static int perf_open(struct inode *inode, struct file *file);
 static ssize_t perf_read(struct file *file, char __user *buf, size_t cnt, loff_t *ppos);
-static ssize_t perf_write(struct file *file, const char __user *buf, size_t count, 
-	loff_t *ppos);
+static ssize_t perf_write(struct file *file, const char __user *buf,
+	size_t count, loff_t *ppos);
 static long perf_ioctl(struct file *file, unsigned int cmd, unsigned long arg);
 static void perf_start_counters(void);
 static int perf_stop_counters(uint32_t *raddr);
@@ -222,7 +222,7 @@ extern void perf_intrigue_disable_perf_counters (void);
 /*
  * configure:
  *
- * Configure the cpu with a given data image.  First turn off the counters, 
+ * Configure the cpu with a given data image.  First turn off the counters,
  * then download the image, then turn the counters back on.
  */
 static int perf_config(uint32_t *image_ptr)
@@ -234,7 +234,7 @@ static int perf_config(uint32_t *image_ptr)
 	error = perf_stop_counters(raddr);
 	if (error != 0) {
 		printk("perf_config: perf_stop_counters = %ld\n", error);
-		return -EINVAL; 
+		return -EINVAL;
 	}
 
 printk("Preparing to write image\n");
@@ -242,7 +242,7 @@ printk("Preparing to write image\n");
 	error = perf_write_image((uint64_t *)image_ptr);
 	if (error != 0) {
 		printk("perf_config: DOWNLOAD = %ld\n", error);
-		return -EINVAL; 
+		return -EINVAL;
 	}
 
 printk("Preparing to start counters\n");
@@ -254,7 +254,7 @@ printk("Preparing to start counters\n");
 }
 
 /*
- * Open the device and initialize all of its memory.  The device is only 
+ * Open the device and initialize all of its memory.  The device is only
  * opened once, but can be "queried" by multiple processes that know its
  * file descriptor.
  */
@@ -298,19 +298,19 @@ static ssize_t perf_read(struct file *file, char __user *buf, size_t cnt, loff_t
  * called on the processor that the download should happen
  * on.
  */
-static ssize_t perf_write(struct file *file, const char __user *buf, size_t count, 
-	loff_t *ppos)
+static ssize_t perf_write(struct file *file, const char __user *buf,
+	size_t count, loff_t *ppos)
 {
 	size_t image_size;
 	uint32_t image_type;
 	uint32_t interface_type;
 	uint32_t test;
 
-	if (perf_processor_interface == ONYX_INTF) 
+	if (perf_processor_interface == ONYX_INTF)
 		image_size = PCXU_IMAGE_SIZE;
-	else if (perf_processor_interface == CUDA_INTF) 
+	else if (perf_processor_interface == CUDA_INTF)
 		image_size = PCXW_IMAGE_SIZE;
-	else 
+	else
 		return -EFAULT;
 
 	if (!capable(CAP_SYS_ADMIN))
@@ -330,22 +330,22 @@ static ssize_t perf_write(struct file *file, const char __user *buf, size_t coun
 
 	/* First check the machine type is correct for
 	   the requested image */
-        if (((perf_processor_interface == CUDA_INTF) &&
-		       (interface_type != CUDA_INTF)) ||
-	    ((perf_processor_interface == ONYX_INTF) &&
-	               (interface_type != ONYX_INTF))) 
+	if (((perf_processor_interface == CUDA_INTF) &&
+			(interface_type != CUDA_INTF)) ||
+		((perf_processor_interface == ONYX_INTF) &&
+			(interface_type != ONYX_INTF)))
 		return -EINVAL;
 
 	/* Next check to make sure the requested image
 	   is valid */
-	if (((interface_type == CUDA_INTF) && 
+	if (((interface_type == CUDA_INTF) &&
 		       (test >= MAX_CUDA_IMAGES)) ||
-	    ((interface_type == ONYX_INTF) && 
-		       (test >= MAX_ONYX_IMAGES))) 
+	    ((interface_type == ONYX_INTF) &&
+		       (test >= MAX_ONYX_IMAGES)))
 		return -EINVAL;
 
 	/* Copy the image into the processor */
-	if (interface_type == CUDA_INTF) 
+	if (interface_type == CUDA_INTF)
 		return perf_config(cuda_images[test]);
 	else
 		return perf_config(onyx_images[test]);
@@ -359,7 +359,7 @@ static ssize_t perf_write(struct file *file, const char __user *buf, size_t coun
 static void perf_patch_images(void)
 {
 #if 0 /* FIXME!! */
-/* 
+/*
  * NOTE:  this routine is VERY specific to the current TLB image.
  * If the image is changed, this routine might also need to be changed.
  */
@@ -367,9 +367,9 @@ static void perf_patch_images(void)
 	extern void $i_dtlb_miss_2_0();
 	extern void PA2_0_iva();
 
-	/* 
+	/*
 	 * We can only use the lower 32-bits, the upper 32-bits should be 0
-	 * anyway given this is in the kernel 
+	 * anyway given this is in the kernel
 	 */
 	uint32_t itlb_addr  = (uint32_t)&($i_itlb_miss_2_0);
 	uint32_t dtlb_addr  = (uint32_t)&($i_dtlb_miss_2_0);
@@ -377,21 +377,21 @@ static void perf_patch_images(void)
 
 	if (perf_processor_interface == ONYX_INTF) {
 		/* clear last 2 bytes */
-		onyx_images[TLBMISS][15] &= 0xffffff00;  
+		onyx_images[TLBMISS][15] &= 0xffffff00;
 		/* set 2 bytes */
 		onyx_images[TLBMISS][15] |= (0x000000ff&((dtlb_addr) >> 24));
 		onyx_images[TLBMISS][16] = (dtlb_addr << 8)&0xffffff00;
 		onyx_images[TLBMISS][17] = itlb_addr;
 
 		/* clear last 2 bytes */
-		onyx_images[TLBHANDMISS][15] &= 0xffffff00;  
+		onyx_images[TLBHANDMISS][15] &= 0xffffff00;
 		/* set 2 bytes */
 		onyx_images[TLBHANDMISS][15] |= (0x000000ff&((dtlb_addr) >> 24));
 		onyx_images[TLBHANDMISS][16] = (dtlb_addr << 8)&0xffffff00;
 		onyx_images[TLBHANDMISS][17] = itlb_addr;
 
 		/* clear last 2 bytes */
-		onyx_images[BIG_CPI][15] &= 0xffffff00;  
+		onyx_images[BIG_CPI][15] &= 0xffffff00;
 		/* set 2 bytes */
 		onyx_images[BIG_CPI][15] |= (0x000000ff&((dtlb_addr) >> 24));
 		onyx_images[BIG_CPI][16] = (dtlb_addr << 8)&0xffffff00;
@@ -404,24 +404,24 @@ static void perf_patch_images(void)
 
 	} else if (perf_processor_interface == CUDA_INTF) {
 		/* Cuda interface */
-		cuda_images[TLBMISS][16] =  
+		cuda_images[TLBMISS][16] =
 			(cuda_images[TLBMISS][16]&0xffff0000) |
 			((dtlb_addr >> 8)&0x0000ffff);
-		cuda_images[TLBMISS][17] = 
+		cuda_images[TLBMISS][17] =
 			((dtlb_addr << 24)&0xff000000) | ((itlb_addr >> 16)&0x000000ff);
 		cuda_images[TLBMISS][18] = (itlb_addr << 16)&0xffff0000;
 
-		cuda_images[TLBHANDMISS][16] = 
+		cuda_images[TLBHANDMISS][16] =
 			(cuda_images[TLBHANDMISS][16]&0xffff0000) |
 			((dtlb_addr >> 8)&0x0000ffff);
-		cuda_images[TLBHANDMISS][17] = 
+		cuda_images[TLBHANDMISS][17] =
 			((dtlb_addr << 24)&0xff000000) | ((itlb_addr >> 16)&0x000000ff);
 		cuda_images[TLBHANDMISS][18] = (itlb_addr << 16)&0xffff0000;
 
-		cuda_images[BIG_CPI][16] = 
+		cuda_images[BIG_CPI][16] =
 			(cuda_images[BIG_CPI][16]&0xffff0000) |
 			((dtlb_addr >> 8)&0x0000ffff);
-		cuda_images[BIG_CPI][17] = 
+		cuda_images[BIG_CPI][17] =
 			((dtlb_addr << 24)&0xff000000) | ((itlb_addr >> 16)&0x000000ff);
 		cuda_images[BIG_CPI][18] = (itlb_addr << 16)&0xffff0000;
 	} else {
@@ -433,7 +433,7 @@ static void perf_patch_images(void)
 
 /*
  * ioctl routine
- * All routines effect the processor that they are executed on.  Thus you 
+ * All routines effect the processor that they are executed on.  Thus you
  * must be running on the processor that you wish to change.
  */
 
@@ -459,7 +459,7 @@ static long perf_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 			}
 
 			/* copy out the Counters */
-			if (copy_to_user((void __user *)arg, raddr, 
+			if (copy_to_user((void __user *)arg, raddr,
 					sizeof (raddr)) != 0) {
 				error =  -EFAULT;
 				break;
@@ -487,7 +487,7 @@ static const struct file_operations perf_fops = {
 	.open = perf_open,
 	.release = perf_release
 };
-	
+
 static struct miscdevice perf_dev = {
 	MISC_DYNAMIC_MINOR,
 	PA_PERF_DEV,
@@ -595,7 +595,7 @@ static int perf_stop_counters(uint32_t *raddr)
 		/* OR sticky2 (bit 1496) to counter2 bit 32 */
 		tmp64 |= (userbuf[23] >> 8) & 0x0000000080000000;
 		raddr[2] = (uint32_t)tmp64;
-		
+
 		/* Counter3 is bits 1497 to 1528 */
 		tmp64 =  (userbuf[23] >> 7) & 0x00000000ffffffff;
 		/* OR sticky3 (bit 1529) to counter3 bit 32 */
@@ -617,7 +617,7 @@ static int perf_stop_counters(uint32_t *raddr)
 		userbuf[22] = 0;
 		userbuf[23] = 0;
 
-		/* 
+		/*
 		 * Write back the zeroed bytes + the image given
 		 * the read was destructive.
 		 */
@@ -625,13 +625,13 @@ static int perf_stop_counters(uint32_t *raddr)
 	} else {
 
 		/*
-		 * Read RDR-15 which contains the counters and sticky bits 
+		 * Read RDR-15 which contains the counters and sticky bits
 		 */
 		if (!perf_rdr_read_ubuf(15, userbuf)) {
 			return -13;
 		}
 
-		/* 
+		/*
 		 * Clear out the counters
 		 */
 		perf_rdr_clear(15);
@@ -644,7 +644,7 @@ static int perf_stop_counters(uint32_t *raddr)
 		raddr[2] = (uint32_t)((userbuf[1] >> 32) & 0x00000000ffffffffUL);
 		raddr[3] = (uint32_t)(userbuf[1] & 0x00000000ffffffffUL);
 	}
- 
+
 	return 0;
 }
 
@@ -682,7 +682,7 @@ static int perf_rdr_read_ubuf(uint32_t	rdr_num, uint64_t *buffer)
 	i = tentry->num_words;
 	while (i--) {
 		buffer[i] = 0;
-	}	
+	}
 
 	/* Check for bits an even number of 64 */
 	if ((xbits = width & 0x03f) != 0) {
@@ -808,18 +808,22 @@ static int perf_write_image(uint64_t *memaddr)
 	}
 
 	runway = ioremap_nocache(cpu_device->hpa.start, 4096);
+	if (!runway) {
+		pr_err("perf_write_image: ioremap failed!\n");
+		return -ENOMEM;
+	}
 
 	/* Merge intrigue bits into Runway STATUS 0 */
 	tmp64 = __raw_readq(runway + RUNWAY_STATUS) & 0xffecfffffffffffful;
-	__raw_writeq(tmp64 | (*memaddr++ & 0x0013000000000000ul), 
+	__raw_writeq(tmp64 | (*memaddr++ & 0x0013000000000000ul),
 		     runway + RUNWAY_STATUS);
-	
+
 	/* Write RUNWAY DEBUG registers */
 	for (i = 0; i < 8; i++) {
 		__raw_writeq(*memaddr++, runway + RUNWAY_DEBUG);
 	}
 
-	return 0; 
+	return 0;
 }
 
 /*
@@ -843,7 +847,7 @@ printk("perf_rdr_write\n");
 			perf_rdr_shift_out_U(rdr_num, buffer[i]);
 		} else {
 			perf_rdr_shift_out_W(rdr_num, buffer[i]);
-		}	
+		}
 	}
 printk("perf_rdr_write done\n");
 }

arch/parisc/kernel/process.c

@@ -142,6 +142,8 @@ void machine_power_off(void)
 
 	printk(KERN_EMERG "System shut down completed.\n"
 	       "Please power this system off now.");
+
+	for (;;);
 }
 
 void (*pm_power_off)(void) = machine_power_off;

arch/parisc/kernel/syscall_table.S

@@ -444,6 +444,7 @@
 	ENTRY_SAME(copy_file_range)
 	ENTRY_COMP(preadv2)
 	ENTRY_COMP(pwritev2)
+	ENTRY_SAME(statx)
 
 
 .ifne (. - 90b) - (__NR_Linux_syscalls * (91b - 90b))

arch/powerpc/include/asm/systbl.h

@@ -387,3 +387,4 @@ SYSCALL(copy_file_range)
 COMPAT_SYS_SPU(preadv2)
 COMPAT_SYS_SPU(pwritev2)
 SYSCALL(kexec_file_load)
+SYSCALL(statx)

arch/powerpc/include/asm/unistd.h

@@ -12,7 +12,7 @@
 #include <uapi/asm/unistd.h>
 
 
-#define NR_syscalls		383
+#define NR_syscalls		384
 
 #define __NR__exit __NR_exit
 

arch/powerpc/include/uapi/asm/unistd.h

@@ -393,5 +393,6 @@
 #define __NR_preadv2		380
 #define __NR_pwritev2		381
 #define __NR_kexec_file_load	382
+#define __NR_statx		383
 
 #endif /* _UAPI_ASM_POWERPC_UNISTD_H_ */

arch/powerpc/kernel/idle_book3s.S

@@ -449,9 +449,23 @@ END_FTR_SECTION_IFSET(CPU_FTR_ARCH_300)
 _GLOBAL(pnv_wakeup_tb_loss)
 	ld	r1,PACAR1(r13)
 	/*
-	 * Before entering any idle state, the NVGPRs are saved in the stack
-	 * and they are restored before switching to the process context. Hence
-	 * until they are restored, they are free to be used.
+	 * Before entering any idle state, the NVGPRs are saved in the stack.
+	 * If there was a state loss, or PACA_NAPSTATELOST was set, then the
+	 * NVGPRs are restored. If we are here, it is likely that state is lost,
+	 * but not guaranteed -- neither ISA207 nor ISA300 tests to reach
+	 * here are the same as the test to restore NVGPRS:
+	 * PACA_THREAD_IDLE_STATE test for ISA207, PSSCR test for ISA300,
+	 * and SRR1 test for restoring NVGPRs.
+	 *
+	 * We are about to clobber NVGPRs now, so set NAPSTATELOST to
+	 * guarantee they will always be restored. This might be tightened
+	 * with careful reading of specs (particularly for ISA300) but this
+	 * is already a slow wakeup path and it's simpler to be safe.
+	 */
+	li	r0,1
+	stb	r0,PACA_NAPSTATELOST(r13)
+
+	/*
 	 *
 	 * Save SRR1 and LR in NVGPRs as they might be clobbered in
 	 * opal_call() (called in CHECK_HMI_INTERRUPT). SRR1 is required

arch/powerpc/mm/init_64.c

@@ -397,8 +397,7 @@ static void early_check_vec5(void)
 void __init mmu_early_init_devtree(void)
 {
 	/* Disable radix mode based on kernel command line. */
-	/* We don't yet have the machinery to do radix as a guest. */
-	if (disable_radix || !(mfmsr() & MSR_HV))
+	if (disable_radix)
 		cur_cpu_spec->mmu_features &= ~MMU_FTR_TYPE_RADIX;
 
 	/*

arch/powerpc/platforms/pseries/lpar.c

@@ -751,7 +751,9 @@ void __init hpte_init_pseries(void)
 	mmu_hash_ops.flush_hash_range	 = pSeries_lpar_flush_hash_range;
 	mmu_hash_ops.hpte_clear_all      = pseries_hpte_clear_all;
 	mmu_hash_ops.hugepage_invalidate = pSeries_lpar_hugepage_invalidate;
-	mmu_hash_ops.resize_hpt		 = pseries_lpar_resize_hpt;
+
+	if (firmware_has_feature(FW_FEATURE_HPT_RESIZE))
+		mmu_hash_ops.resize_hpt = pseries_lpar_resize_hpt;
 }
 
 void radix_init_pseries(void)

arch/x86/include/asm/kvm_page_track.h

@@ -46,6 +46,7 @@ struct kvm_page_track_notifier_node {
 };
 
 void kvm_page_track_init(struct kvm *kvm);
+void kvm_page_track_cleanup(struct kvm *kvm);
 
 void kvm_page_track_free_memslot(struct kvm_memory_slot *free,
 				 struct kvm_memory_slot *dont);

arch/x86/include/asm/pgtable-3level.h

@@ -121,12 +121,9 @@ static inline void native_pmd_clear(pmd_t *pmd)
 	*(tmp + 1) = 0;
 }
 
-#if !defined(CONFIG_SMP) || (defined(CONFIG_HIGHMEM64G) && \
-		defined(CONFIG_PARAVIRT))
 static inline void native_pud_clear(pud_t *pudp)
 {
 }
-#endif
 
 static inline void pud_clear(pud_t *pudp)
 {

arch/x86/include/asm/pgtable.h

@@ -62,7 +62,7 @@ extern struct mm_struct *pgd_page_get_mm(struct page *page);
 # define set_pud(pudp, pud)		native_set_pud(pudp, pud)
 #endif
 
-#ifndef __PAGETABLE_PMD_FOLDED
+#ifndef __PAGETABLE_PUD_FOLDED
 #define pud_clear(pud)			native_pud_clear(pud)
 #endif
 

arch/x86/kernel/acpi/boot.c

@@ -179,10 +179,15 @@ static int acpi_register_lapic(int id, u32 acpiid, u8 enabled)
 		return -EINVAL;
 	}
 
+	if (!enabled) {
+		++disabled_cpus;
+		return -EINVAL;
+	}
+
 	if (boot_cpu_physical_apicid != -1U)
 		ver = boot_cpu_apic_version;
 
-	cpu = __generic_processor_info(id, ver, enabled);
+	cpu = generic_processor_info(id, ver);
 	if (cpu >= 0)
 		early_per_cpu(x86_cpu_to_acpiid, cpu) = acpiid;
 
@@ -710,7 +715,7 @@ static void __init acpi_set_irq_model_ioapic(void)
 #ifdef CONFIG_ACPI_HOTPLUG_CPU
 #include <acpi/processor.h>
 
-int acpi_map_cpu2node(acpi_handle handle, int cpu, int physid)
+static int acpi_map_cpu2node(acpi_handle handle, int cpu, int physid)
 {
 #ifdef CONFIG_ACPI_NUMA
 	int nid;

arch/x86/kernel/apic/apic.c

@@ -2063,7 +2063,7 @@ static int allocate_logical_cpuid(int apicid)
 	return nr_logical_cpuids++;
 }
 
-int __generic_processor_info(int apicid, int version, bool enabled)
+int generic_processor_info(int apicid, int version)
 {
 	int cpu, max = nr_cpu_ids;
 	bool boot_cpu_detected = physid_isset(boot_cpu_physical_apicid,
@@ -2121,11 +2121,9 @@ int __generic_processor_info(int apicid, int version, bool enabled)
 	if (num_processors >= nr_cpu_ids) {
 		int thiscpu = max + disabled_cpus;
 
-		if (enabled) {
-			pr_warning("APIC: NR_CPUS/possible_cpus limit of %i "
-				   "reached. Processor %d/0x%x ignored.\n",
-				   max, thiscpu, apicid);
-		}
+		pr_warning("APIC: NR_CPUS/possible_cpus limit of %i "
+			   "reached. Processor %d/0x%x ignored.\n",
+			   max, thiscpu, apicid);
 
 		disabled_cpus++;
 		return -EINVAL;
@@ -2177,23 +2175,13 @@ int __generic_processor_info(int apicid, int version, bool enabled)
 		apic->x86_32_early_logical_apicid(cpu);
 #endif
 	set_cpu_possible(cpu, true);
-
-	if (enabled) {
-		num_processors++;
-		physid_set(apicid, phys_cpu_present_map);
-		set_cpu_present(cpu, true);
-	} else {
-		disabled_cpus++;
-	}
+	physid_set(apicid, phys_cpu_present_map);
+	set_cpu_present(cpu, true);
+	num_processors++;
 
 	return cpu;
 }
 
-int generic_processor_info(int apicid, int version)
-{
-	return __generic_processor_info(apicid, version, true);
-}
-
 int hard_smp_processor_id(void)
 {
 	return read_apic_id();

arch/x86/kernel/cpu/intel_rdt_rdtgroup.c

@@ -727,7 +727,7 @@ void rdtgroup_kn_unlock(struct kernfs_node *kn)
 	if (atomic_dec_and_test(&rdtgrp->waitcount) &&
 	    (rdtgrp->flags & RDT_DELETED)) {
 		kernfs_unbreak_active_protection(kn);
-		kernfs_put(kn);
+		kernfs_put(rdtgrp->kn);
 		kfree(rdtgrp);
 	} else {
 		kernfs_unbreak_active_protection(kn);

arch/x86/kernel/head64.c

@@ -4,6 +4,7 @@
  *  Copyright (C) 2000 Andrea Arcangeli <andrea@suse.de> SuSE
  */
 
+#define DISABLE_BRANCH_PROFILING
 #include <linux/init.h>
 #include <linux/linkage.h>
 #include <linux/types.h>

arch/x86/kernel/nmi.c

@@ -166,11 +166,9 @@ int __register_nmi_handler(unsigned int type, struct nmiaction *action)
 	spin_lock_irqsave(&desc->lock, flags);
 
 	/*
-	 * most handlers of type NMI_UNKNOWN never return because
-	 * they just assume the NMI is theirs.  Just a sanity check
-	 * to manage expectations
+	 * Indicate if there are multiple registrations on the
+	 * internal NMI handler call chains (SERR and IO_CHECK).
 	 */
-	WARN_ON_ONCE(type == NMI_UNKNOWN && !list_empty(&desc->head));
 	WARN_ON_ONCE(type == NMI_SERR && !list_empty(&desc->head));
 	WARN_ON_ONCE(type == NMI_IO_CHECK && !list_empty(&desc->head));
 

arch/x86/kernel/tsc.c

@@ -1333,6 +1333,8 @@ static int __init init_tsc_clocksource(void)
 	 * the refined calibration and directly register it as a clocksource.
 	 */
 	if (boot_cpu_has(X86_FEATURE_TSC_KNOWN_FREQ)) {
+		if (boot_cpu_has(X86_FEATURE_ART))
+			art_related_clocksource = &clocksource_tsc;
 		clocksource_register_khz(&clocksource_tsc, tsc_khz);
 		return 0;
 	}

arch/x86/kernel/unwind_frame.c

@@ -82,19 +82,43 @@ static size_t regs_size(struct pt_regs *regs)
 	return sizeof(*regs);
 }
 
+#ifdef CONFIG_X86_32
+#define GCC_REALIGN_WORDS 3
+#else
+#define GCC_REALIGN_WORDS 1
+#endif
+
 static bool is_last_task_frame(struct unwind_state *state)
 {
-	unsigned long bp = (unsigned long)state->bp;
-	unsigned long regs = (unsigned long)task_pt_regs(state->task);
+	unsigned long *last_bp = (unsigned long *)task_pt_regs(state->task) - 2;
+	unsigned long *aligned_bp = last_bp - GCC_REALIGN_WORDS;
 
 	/*
 	 * We have to check for the last task frame at two different locations
 	 * because gcc can occasionally decide to realign the stack pointer and
-	 * change the offset of the stack frame by a word in the prologue of a
-	 * function called by head/entry code.
+	 * change the offset of the stack frame in the prologue of a function
+	 * called by head/entry code.  Examples:
+	 *
+	 * <start_secondary>:
+	 *      push   %edi
+	 *      lea    0x8(%esp),%edi
+	 *      and    $0xfffffff8,%esp
+	 *      pushl  -0x4(%edi)
+	 *      push   %ebp
+	 *      mov    %esp,%ebp
+	 *
+	 * <x86_64_start_kernel>:
+	 *      lea    0x8(%rsp),%r10
+	 *      and    $0xfffffffffffffff0,%rsp
+	 *      pushq  -0x8(%r10)
+	 *      push   %rbp
+	 *      mov    %rsp,%rbp
+	 *
+	 * Note that after aligning the stack, it pushes a duplicate copy of
+	 * the return address before pushing the frame pointer.
 	 */
-	return bp == regs - FRAME_HEADER_SIZE ||
-	       bp == regs - FRAME_HEADER_SIZE - sizeof(long);
+	return (state->bp == last_bp ||
+		(state->bp == aligned_bp && *(aligned_bp+1) == *(last_bp+1)));
 }
 
 /*

arch/x86/kvm/i8259.c

@@ -657,6 +657,9 @@ void kvm_pic_destroy(struct kvm *kvm)
 {
 	struct kvm_pic *vpic = kvm->arch.vpic;
 
+	if (!vpic)
+		return;
+
 	kvm_io_bus_unregister_dev(vpic->kvm, KVM_PIO_BUS, &vpic->dev_master);
 	kvm_io_bus_unregister_dev(vpic->kvm, KVM_PIO_BUS, &vpic->dev_slave);
 	kvm_io_bus_unregister_dev(vpic->kvm, KVM_PIO_BUS, &vpic->dev_eclr);

arch/x86/kvm/ioapic.c

@@ -635,6 +635,9 @@ void kvm_ioapic_destroy(struct kvm *kvm)
 {
 	struct kvm_ioapic *ioapic = kvm->arch.vioapic;
 
+	if (!ioapic)
+		return;
+
 	cancel_delayed_work_sync(&ioapic->eoi_inject);
 	kvm_io_bus_unregister_dev(kvm, KVM_MMIO_BUS, &ioapic->dev);
 	kvm->arch.vioapic = NULL;

arch/x86/kvm/page_track.c

@@ -160,6 +160,14 @@ bool kvm_page_track_is_active(struct kvm_vcpu *vcpu, gfn_t gfn,
 	return !!ACCESS_ONCE(slot->arch.gfn_track[mode][index]);
 }
 
+void kvm_page_track_cleanup(struct kvm *kvm)
+{
+	struct kvm_page_track_notifier_head *head;
+
+	head = &kvm->arch.track_notifier_head;
+	cleanup_srcu_struct(&head->track_srcu);
+}
+
 void kvm_page_track_init(struct kvm *kvm)
 {
 	struct kvm_page_track_notifier_head *head;

arch/x86/kvm/svm.c

@@ -1379,6 +1379,9 @@ static void avic_vm_destroy(struct kvm *kvm)
 	unsigned long flags;
 	struct kvm_arch *vm_data = &kvm->arch;
 
+	if (!avic)
+		return;
+
 	avic_free_vm_id(vm_data->avic_vm_id);
 
 	if (vm_data->avic_logical_id_table_page)

arch/x86/kvm/vmx.c

@@ -1239,6 +1239,11 @@ static inline bool cpu_has_vmx_invvpid_global(void)
 	return vmx_capability.vpid & VMX_VPID_EXTENT_GLOBAL_CONTEXT_BIT;
 }
 
+static inline bool cpu_has_vmx_invvpid(void)
+{
+	return vmx_capability.vpid & VMX_VPID_INVVPID_BIT;
+}
+
 static inline bool cpu_has_vmx_ept(void)
 {
 	return vmcs_config.cpu_based_2nd_exec_ctrl &
@@ -2753,7 +2758,6 @@ static void nested_vmx_setup_ctls_msrs(struct vcpu_vmx *vmx)
 		SECONDARY_EXEC_RDTSCP |
 		SECONDARY_EXEC_DESC |
 		SECONDARY_EXEC_VIRTUALIZE_X2APIC_MODE |
-		SECONDARY_EXEC_ENABLE_VPID |
 		SECONDARY_EXEC_APIC_REGISTER_VIRT |
 		SECONDARY_EXEC_VIRTUAL_INTR_DELIVERY |
 		SECONDARY_EXEC_WBINVD_EXITING |
@@ -2781,10 +2785,12 @@ static void nested_vmx_setup_ctls_msrs(struct vcpu_vmx *vmx)
 	 * though it is treated as global context.  The alternative is
 	 * not failing the single-context invvpid, and it is worse.
 	 */
-	if (enable_vpid)
+	if (enable_vpid) {
+		vmx->nested.nested_vmx_secondary_ctls_high |=
+			SECONDARY_EXEC_ENABLE_VPID;
 		vmx->nested.nested_vmx_vpid_caps = VMX_VPID_INVVPID_BIT |
 			VMX_VPID_EXTENT_SUPPORTED_MASK;
-	else
+	} else
 		vmx->nested.nested_vmx_vpid_caps = 0;
 
 	if (enable_unrestricted_guest)
@@ -4024,6 +4030,12 @@ static void vmx_flush_tlb(struct kvm_vcpu *vcpu)
 	__vmx_flush_tlb(vcpu, to_vmx(vcpu)->vpid);
 }
 
+static void vmx_flush_tlb_ept_only(struct kvm_vcpu *vcpu)
+{
+	if (enable_ept)
+		vmx_flush_tlb(vcpu);
+}
+
 static void vmx_decache_cr0_guest_bits(struct kvm_vcpu *vcpu)
 {
 	ulong cr0_guest_owned_bits = vcpu->arch.cr0_guest_owned_bits;
@@ -6517,8 +6529,10 @@ static __init int hardware_setup(void)
 	if (boot_cpu_has(X86_FEATURE_NX))
 		kvm_enable_efer_bits(EFER_NX);
 
-	if (!cpu_has_vmx_vpid())
+	if (!cpu_has_vmx_vpid() || !cpu_has_vmx_invvpid() ||
+		!(cpu_has_vmx_invvpid_single() || cpu_has_vmx_invvpid_global()))
 		enable_vpid = 0;
+
 	if (!cpu_has_vmx_shadow_vmcs())
 		enable_shadow_vmcs = 0;
 	if (enable_shadow_vmcs)
@@ -8501,7 +8515,8 @@ static int vmx_handle_exit(struct kvm_vcpu *vcpu)
 	    && kvm_vmx_exit_handlers[exit_reason])
 		return kvm_vmx_exit_handlers[exit_reason](vcpu);
 	else {
-		WARN_ONCE(1, "vmx: unexpected exit reason 0x%x\n", exit_reason);
+		vcpu_unimpl(vcpu, "vmx: unexpected exit reason 0x%x\n",
+				exit_reason);
 		kvm_queue_exception(vcpu, UD_VECTOR);
 		return 1;
 	}
@@ -8547,6 +8562,7 @@ static void vmx_set_virtual_x2apic_mode(struct kvm_vcpu *vcpu, bool set)
 	} else {
 		sec_exec_control &= ~SECONDARY_EXEC_VIRTUALIZE_X2APIC_MODE;
 		sec_exec_control |= SECONDARY_EXEC_VIRTUALIZE_APIC_ACCESSES;
+		vmx_flush_tlb_ept_only(vcpu);
 	}
 	vmcs_write32(SECONDARY_VM_EXEC_CONTROL, sec_exec_control);
 
@@ -8572,8 +8588,10 @@ static void vmx_set_apic_access_page_addr(struct kvm_vcpu *vcpu, hpa_t hpa)
 	 */
 	if (!is_guest_mode(vcpu) ||
 	    !nested_cpu_has2(get_vmcs12(&vmx->vcpu),
-			     SECONDARY_EXEC_VIRTUALIZE_APIC_ACCESSES))
+			     SECONDARY_EXEC_VIRTUALIZE_APIC_ACCESSES)) {
 		vmcs_write64(APIC_ACCESS_ADDR, hpa);
+		vmx_flush_tlb_ept_only(vcpu);
+	}
 }
 
 static void vmx_hwapic_isr_update(struct kvm_vcpu *vcpu, int max_isr)
@@ -9974,7 +9992,6 @@ static int prepare_vmcs02(struct kvm_vcpu *vcpu, struct vmcs12 *vmcs12,
 {
 	struct vcpu_vmx *vmx = to_vmx(vcpu);
 	u32 exec_control;
-	bool nested_ept_enabled = false;
 
 	vmcs_write16(GUEST_ES_SELECTOR, vmcs12->guest_es_selector);
 	vmcs_write16(GUEST_CS_SELECTOR, vmcs12->guest_cs_selector);
@@ -10121,8 +10138,6 @@ static int prepare_vmcs02(struct kvm_vcpu *vcpu, struct vmcs12 *vmcs12,
 				vmcs12->guest_intr_status);
 		}
 
-		nested_ept_enabled = (exec_control & SECONDARY_EXEC_ENABLE_EPT) != 0;
-
 		/*
 		 * Write an illegal value to APIC_ACCESS_ADDR. Later,
 		 * nested_get_vmcs12_pages will either fix it up or
@@ -10255,6 +10270,9 @@ static int prepare_vmcs02(struct kvm_vcpu *vcpu, struct vmcs12 *vmcs12,
 	if (nested_cpu_has_ept(vmcs12)) {
 		kvm_mmu_unload(vcpu);
 		nested_ept_init_mmu_context(vcpu);
+	} else if (nested_cpu_has2(vmcs12,
+				   SECONDARY_EXEC_VIRTUALIZE_APIC_ACCESSES)) {
+		vmx_flush_tlb_ept_only(vcpu);
 	}
 
 	/*
@@ -10282,12 +10300,10 @@ static int prepare_vmcs02(struct kvm_vcpu *vcpu, struct vmcs12 *vmcs12,
 	vmx_set_efer(vcpu, vcpu->arch.efer);
 
 	/* Shadow page tables on either EPT or shadow page tables. */
-	if (nested_vmx_load_cr3(vcpu, vmcs12->guest_cr3, nested_ept_enabled,
+	if (nested_vmx_load_cr3(vcpu, vmcs12->guest_cr3, nested_cpu_has_ept(vmcs12),
 				entry_failure_code))
 		return 1;
 
-	kvm_mmu_reset_context(vcpu);
-
 	if (!enable_ept)
 		vcpu->arch.walk_mmu->inject_page_fault = vmx_inject_page_fault_nested;
 
@@ -11056,6 +11072,10 @@ static void nested_vmx_vmexit(struct kvm_vcpu *vcpu, u32 exit_reason,
 		vmx->nested.change_vmcs01_virtual_x2apic_mode = false;
 		vmx_set_virtual_x2apic_mode(vcpu,
 				vcpu->arch.apic_base & X2APIC_ENABLE);
+	} else if (!nested_cpu_has_ept(vmcs12) &&
+		   nested_cpu_has2(vmcs12,
+				   SECONDARY_EXEC_VIRTUALIZE_APIC_ACCESSES)) {
+		vmx_flush_tlb_ept_only(vcpu);
 	}
 
 	/* This is needed for same reason as it was needed in prepare_vmcs02 */

arch/x86/kvm/x86.c

@@ -8153,11 +8153,12 @@ void kvm_arch_destroy_vm(struct kvm *kvm)
 	if (kvm_x86_ops->vm_destroy)
 		kvm_x86_ops->vm_destroy(kvm);
 	kvm_iommu_unmap_guest(kvm);
-	kfree(kvm->arch.vpic);
-	kfree(kvm->arch.vioapic);
+	kvm_pic_destroy(kvm);
+	kvm_ioapic_destroy(kvm);
 	kvm_free_vcpus(kvm);
 	kvfree(rcu_dereference_check(kvm->arch.apic_map, 1));
 	kvm_mmu_uninit_vm(kvm);
+	kvm_page_track_cleanup(kvm);
 }
 
 void kvm_arch_free_memslot(struct kvm *kvm, struct kvm_memory_slot *free,
@@ -8566,11 +8567,11 @@ void kvm_arch_async_page_present(struct kvm_vcpu *vcpu,
 {
 	struct x86_exception fault;
 
-	trace_kvm_async_pf_ready(work->arch.token, work->gva);
 	if (work->wakeup_all)
 		work->arch.token = ~0; /* broadcast wakeup */
 	else
 		kvm_del_async_pf_gfn(vcpu, work->arch.gfn);
+	trace_kvm_async_pf_ready(work->arch.token, work->gva);
 
 	if ((vcpu->arch.apf.msr_val & KVM_ASYNC_PF_ENABLED) &&
 	    !apf_put_user(vcpu, KVM_PV_REASON_PAGE_READY)) {

arch/x86/mm/kasan_init_64.c

@@ -1,3 +1,4 @@
+#define DISABLE_BRANCH_PROFILING
 #define pr_fmt(fmt) "kasan: " fmt
 #include <linux/bootmem.h>
 #include <linux/kasan.h>

arch/x86/mm/mpx.c

@@ -590,7 +590,7 @@ static unsigned long mpx_bd_entry_to_bt_addr(struct mm_struct *mm,
  * we might run off the end of the bounds table if we are on
  * a 64-bit kernel and try to get 8 bytes.
  */
-int get_user_bd_entry(struct mm_struct *mm, unsigned long *bd_entry_ret,
+static int get_user_bd_entry(struct mm_struct *mm, unsigned long *bd_entry_ret,
 		long __user *bd_entry_ptr)
 {
 	u32 bd_entry_32;

arch/x86/platform/intel-mid/device_libs/Makefile

@@ -26,5 +26,6 @@ obj-$(subst m,y,$(CONFIG_GPIO_PCA953X)) += platform_pcal9555a.o
 obj-$(subst m,y,$(CONFIG_GPIO_PCA953X)) += platform_tca6416.o
 # MISC Devices
 obj-$(subst m,y,$(CONFIG_KEYBOARD_GPIO)) += platform_gpio_keys.o
+obj-$(subst m,y,$(CONFIG_INTEL_MID_POWER_BUTTON)) += platform_mrfld_power_btn.o
 obj-$(subst m,y,$(CONFIG_RTC_DRV_CMOS)) += platform_mrfld_rtc.o
 obj-$(subst m,y,$(CONFIG_INTEL_MID_WATCHDOG)) += platform_mrfld_wdt.o

arch/x86/platform/intel-mid/device_libs/platform_mrfld_power_btn.c

@@ -0,0 +1,82 @@
+/*
+ * Intel Merrifield power button support
+ *
+ * (C) Copyright 2017 Intel Corporation
+ *
+ * Author: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; version 2
+ * of the License.
+ */
+
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/platform_device.h>
+#include <linux/sfi.h>
+
+#include <asm/intel-mid.h>
+#include <asm/intel_scu_ipc.h>
+
+static struct resource mrfld_power_btn_resources[] = {
+	{
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device mrfld_power_btn_dev = {
+	.name		= "msic_power_btn",
+	.id		= PLATFORM_DEVID_NONE,
+	.num_resources	= ARRAY_SIZE(mrfld_power_btn_resources),
+	.resource	= mrfld_power_btn_resources,
+};
+
+static int mrfld_power_btn_scu_status_change(struct notifier_block *nb,
+					     unsigned long code, void *data)
+{
+	if (code == SCU_DOWN) {
+		platform_device_unregister(&mrfld_power_btn_dev);
+		return 0;
+	}
+
+	return platform_device_register(&mrfld_power_btn_dev);
+}
+
+static struct notifier_block mrfld_power_btn_scu_notifier = {
+	.notifier_call	= mrfld_power_btn_scu_status_change,
+};
+
+static int __init register_mrfld_power_btn(void)
+{
+	if (intel_mid_identify_cpu() != INTEL_MID_CPU_CHIP_TANGIER)
+		return -ENODEV;
+
+	/*
+	 * We need to be sure that the SCU IPC is ready before
+	 * PMIC power button device can be registered:
+	 */
+	intel_scu_notifier_add(&mrfld_power_btn_scu_notifier);
+
+	return 0;
+}
+arch_initcall(register_mrfld_power_btn);
+
+static void __init *mrfld_power_btn_platform_data(void *info)
+{
+	struct resource *res = mrfld_power_btn_resources;
+	struct sfi_device_table_entry *pentry = info;
+
+	res->start = res->end = pentry->irq;
+	return NULL;
+}
+
+static const struct devs_id mrfld_power_btn_dev_id __initconst = {
+	.name			= "bcove_power_btn",
+	.type			= SFI_DEV_TYPE_IPC,
+	.delay			= 1,
+	.msic			= 1,
+	.get_platform_data	= &mrfld_power_btn_platform_data,
+};
+
+sfi_device(mrfld_power_btn_dev_id);