Merge branch 'sa1100' into for-next

arch/arm/mach-sa1100/Makefile

@@ -3,7 +3,7 @@
 #
 
 # Common support
-obj-y := clock.o generic.o irq.o #nmi-oopser.o
+obj-y := clock.o generic.o #nmi-oopser.o
 
 # Specific board support
 obj-$(CONFIG_SA1100_ASSABET)		+= assabet.o

arch/arm/mach-sa1100/generic.c

@@ -20,9 +20,12 @@
 #include <linux/ioport.h>
 #include <linux/platform_device.h>
 #include <linux/reboot.h>
+#include <linux/irqchip/irq-sa11x0.h>
 
 #include <video/sa1100fb.h>
 
+#include <soc/sa1100/pwer.h>
+
 #include <asm/div64.h>
 #include <asm/mach/map.h>
 #include <asm/mach/flash.h>
@@ -375,6 +378,18 @@ void __init sa1100_timer_init(void)
 	pxa_timer_nodt_init(IRQ_OST0, io_p2v(0x90000000), 3686400);
 }
 
+static struct resource irq_resource =
+	DEFINE_RES_MEM_NAMED(0x90050000, SZ_64K, "irqs");
+
+void __init sa1100_init_irq(void)
+{
+	request_resource(&iomem_resource, &irq_resource);
+
+	sa11x0_init_irq_nodt(IRQ_GPIO0_SC, irq_resource.start);
+
+	sa1100_init_gpio();
+}
+
 /*
  * Disable the memory bus request/grant signals on the SA1110 to
  * ensure that we don't receive spurious memory requests.  We set
@@ -416,3 +431,25 @@ void sa1110_mb_enable(void)
 	local_irq_restore(flags);
 }
 
+int sa11x0_gpio_set_wake(unsigned int gpio, unsigned int on)
+{
+	if (on)
+		PWER |= BIT(gpio);
+	else
+		PWER &= ~BIT(gpio);
+
+	return 0;
+}
+
+int sa11x0_sc_set_wake(unsigned int irq, unsigned int on)
+{
+	if (BIT(irq) != IC_RTCAlrm)
+		return -EINVAL;
+
+	if (on)
+		PWER |= PWER_RTC;
+	else
+		PWER &= ~PWER_RTC;
+
+	return 0;
+}

drivers/irqchip/Makefile

@@ -47,3 +47,4 @@ obj-$(CONFIG_KEYSTONE_IRQ)		+= irq-keystone.o
 obj-$(CONFIG_MIPS_GIC)			+= irq-mips-gic.o
 obj-$(CONFIG_ARCH_MEDIATEK)		+= irq-mtk-sysirq.o
 obj-$(CONFIG_ARCH_DIGICOLOR)		+= irq-digicolor.o
+obj-$(CONFIG_ARCH_SA1100)		+= irq-sa11x0.o

arch/arm/mach-sa1100/irq.c → drivers/irqchip/irq-sa11x0.c

@@ -1,9 +1,8 @@
 /*
- * linux/arch/arm/mach-sa1100/irq.c
- *
+ * Copyright (C) 2015 Dmitry Eremin-Solenikov
  * Copyright (C) 1999-2001 Nicolas Pitre
  *
- * Generic IRQ handling for the SA11x0, GPIO 11-27 IRQ demultiplexing.
+ * Generic IRQ handling for the SA11x0.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -15,16 +14,21 @@
 #include <linux/io.h>
 #include <linux/irq.h>
 #include <linux/irqdomain.h>
-#include <linux/ioport.h>
 #include <linux/syscore_ops.h>
+#include <linux/irqchip/irq-sa11x0.h>
+
+#include <soc/sa1100/pwer.h>
 
-#include <mach/hardware.h>
-#include <mach/irqs.h>
-#include <asm/mach/irq.h>
 #include <asm/exception.h>
 
-#include "generic.h"
+#define ICIP	0x00  /* IC IRQ Pending reg. */
+#define ICMR	0x04  /* IC Mask Reg.        */
+#define ICLR	0x08  /* IC Level Reg.       */
+#define ICCR	0x0C  /* IC Control Reg.     */
+#define ICFP	0x10  /* IC FIQ Pending reg. */
+#define ICPR	0x20  /* IC Pending Reg.     */
 
+static void __iomem *iobase;
 
 /*
  * We don't need to ACK IRQs on the SA1100 unless they're GPIOs
@@ -32,27 +36,25 @@
  */
 static void sa1100_mask_irq(struct irq_data *d)
 {
-	ICMR &= ~BIT(d->hwirq);
+	u32 reg;
+
+	reg = readl_relaxed(iobase + ICMR);
+	reg &= ~BIT(d->hwirq);
+	writel_relaxed(reg, iobase + ICMR);
 }
 
 static void sa1100_unmask_irq(struct irq_data *d)
 {
-	ICMR |= BIT(d->hwirq);
+	u32 reg;
+
+	reg = readl_relaxed(iobase + ICMR);
+	reg |= BIT(d->hwirq);
+	writel_relaxed(reg, iobase + ICMR);
 }
 
-/*
- * Apart form GPIOs, only the RTC alarm can be a wakeup event.
- */
 static int sa1100_set_wake(struct irq_data *d, unsigned int on)
 {
-	if (BIT(d->hwirq) == IC_RTCAlrm) {
-		if (on)
-			PWER |= PWER_RTC;
-		else
-			PWER &= ~PWER_RTC;
-		return 0;
-	}
-	return -EINVAL;
+	return sa11x0_sc_set_wake(d->hwirq, on);
 }
 
 static struct irq_chip sa1100_normal_chip = {
@@ -80,9 +82,6 @@ static const struct irq_domain_ops sa1100_normal_irqdomain_ops = {
 
 static struct irq_domain *sa1100_normal_irqdomain;
 
-static struct resource irq_resource =
-	DEFINE_RES_MEM_NAMED(0x90050000, SZ_64K, "irqs");
-
 static struct sa1100irq_state {
 	unsigned int	saved;
 	unsigned int	icmr;
@@ -95,16 +94,14 @@ static int sa1100irq_suspend(void)
 	struct sa1100irq_state *st = &sa1100irq_state;
 
 	st->saved = 1;
-	st->icmr = ICMR;
-	st->iclr = ICLR;
-	st->iccr = ICCR;
+	st->icmr = readl_relaxed(iobase + ICMR);
+	st->iclr = readl_relaxed(iobase + ICLR);
+	st->iccr = readl_relaxed(iobase + ICCR);
 
 	/*
 	 * Disable all GPIO-based interrupts.
 	 */
-	ICMR &= ~(IC_GPIO11_27|IC_GPIO10|IC_GPIO9|IC_GPIO8|IC_GPIO7|
-		  IC_GPIO6|IC_GPIO5|IC_GPIO4|IC_GPIO3|IC_GPIO2|
-		  IC_GPIO1|IC_GPIO0);
+	writel_relaxed(st->icmr & 0xfffff000, iobase + ICMR);
 
 	return 0;
 }
@@ -114,10 +111,10 @@ static void sa1100irq_resume(void)
 	struct sa1100irq_state *st = &sa1100irq_state;
 
 	if (st->saved) {
-		ICCR = st->iccr;
-		ICLR = st->iclr;
+		writel_relaxed(st->iccr, iobase + ICCR);
+		writel_relaxed(st->iclr, iobase + ICLR);
 
-		ICMR = st->icmr;
+		writel_relaxed(st->icmr, iobase + ICMR);
 	}
 }
 
@@ -140,8 +137,8 @@ sa1100_handle_irq(struct pt_regs *regs)
 	uint32_t icip, icmr, mask;
 
 	do {
-		icip = (ICIP);
-		icmr = (ICMR);
+		icip = readl_relaxed(iobase + ICIP);
+		icmr = readl_relaxed(iobase + ICMR);
 		mask = icip & icmr;
 
 		if (mask == 0)
@@ -152,27 +149,27 @@ sa1100_handle_irq(struct pt_regs *regs)
 	} while (1);
 }
 
-void __init sa1100_init_irq(void)
+void __init sa11x0_init_irq_nodt(int irq_start, resource_size_t io_start)
 {
-	request_resource(&iomem_resource, &irq_resource);
+	iobase = ioremap(io_start, SZ_64K);
+	if (WARN_ON(!iobase))
+		return;
 
 	/* disable all IRQs */
-	ICMR = 0;
+	writel_relaxed(0, iobase + ICMR);
 
 	/* all IRQs are IRQ, not FIQ */
-	ICLR = 0;
+	writel_relaxed(0, iobase + ICLR);
 
 	/*
 	 * Whatever the doc says, this has to be set for the wait-on-irq
 	 * instruction to work... on a SA1100 rev 9 at least.
 	 */
-	ICCR = 1;
+	writel_relaxed(1, iobase + ICCR);
 
 	sa1100_normal_irqdomain = irq_domain_add_simple(NULL,
-			32, IRQ_GPIO0_SC,
+			32, irq_start,
 			&sa1100_normal_irqdomain_ops, NULL);
 
 	set_handle_irq(sa1100_handle_irq);
-
-	sa1100_init_gpio();
 }

include/linux/irqchip/irq-sa11x0.h

@@ -0,0 +1,17 @@
+/*
+ * Generic IRQ handling for the SA11x0.
+ *
+ * Copyright (C) 2015 Dmitry Eremin-Solenikov
+ * Copyright (C) 1999-2001 Nicolas Pitre
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __INCLUDE_LINUX_IRQCHIP_IRQ_SA11x0_H
+#define __INCLUDE_LINUX_IRQCHIP_IRQ_SA11x0_H
+
+void __init sa11x0_init_irq_nodt(int irq_start, resource_size_t io_start);
+
+#endif

include/soc/sa1100/pwer.h

@@ -0,0 +1,15 @@
+#ifndef SOC_SA1100_PWER_H
+#define SOC_SA1100_PWER_H
+
+/*
+ * Copyright (C) 2015, Dmitry Eremin-Solenikov
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+int sa11x0_gpio_set_wake(unsigned int gpio, unsigned int on);
+int sa11x0_sc_set_wake(unsigned int irq, unsigned int on);
+
+#endif