Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc

Pull powerpc updates from Ben Herrenschmidt:
 "Here is the bulk of the powerpc changes for this merge window.  It got
  a bit delayed in part because I wasn't paying attention, and in part
  because I discovered I had a core PCI change without a PCI maintainer
  ack in it.  Bjorn eventually agreed it was ok to merge it though we'll
  probably improve it later and I didn't want to rebase to add his ack.

  There is going to be a bit more next week, essentially fixes that I
  still want to sort through and test.

  The biggest item this time is the support to build the ppc64 LE kernel
  with our new v2 ABI.  We previously supported v2 userspace but the
  kernel itself was a tougher nut to crack.  This is now sorted mostly
  thanks to Anton and Rusty.

  We also have a fairly big series from Cedric that add support for
  64-bit LE zImage boot wrapper.  This was made harder by the fact that
  traditionally our zImage wrapper was always 32-bit, but our new LE
  toolchains don't really support 32-bit anymore (it's somewhat there
  but not really "supported") so we didn't want to rely on it.  This
  meant more churn that just endian fixes.

  This brings some more LE bits as well, such as the ability to run in
  LE mode without a hypervisor (ie. under OPAL firmware) by doing the
  right OPAL call to reinitialize the CPU to take HV interrupts in the
  right mode and the usual pile of endian fixes.

  There's another series from Gavin adding EEH improvements (one day we
  *will* have a release with less than 20 EEH patches, I promise!).

  Another highlight is the support for the "Split core" functionality on
  P8 by Michael.  This allows a P8 core to be split into "sub cores" of
  4 threads which allows the subcores to run different guests under KVM
  (the HW still doesn't support a partition per thread).

  And then the usual misc bits and fixes ..."

[ Further delayed by gmail deciding that BenH is a dirty spammer.
  Google knows.  ]

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (155 commits)
  powerpc/powernv: Add missing include to LPC code
  selftests/powerpc: Test the THP bug we fixed in the previous commit
  powerpc/mm: Check paca psize is up to date for huge mappings
  powerpc/powernv: Pass buffer size to OPAL validate flash call
  powerpc/pseries: hcall functions are exported to modules, need _GLOBAL_TOC()
  powerpc: Exported functions __clear_user and copy_page use r2 so need _GLOBAL_TOC()
  powerpc/powernv: Set memory_block_size_bytes to 256MB
  powerpc: Allow ppc_md platform hook to override memory_block_size_bytes
  powerpc/powernv: Fix endian issues in memory error handling code
  powerpc/eeh: Skip eeh sysfs when eeh is disabled
  powerpc: 64bit sendfile is capped at 2GB
  powerpc/powernv: Provide debugfs access to the LPC bus via OPAL
  powerpc/serial: Use saner flags when creating legacy ports
  powerpc: Add cpu family documentation
  powerpc/xmon: Fix up xmon format strings
  powerpc/powernv: Add calls to support little endian host
  powerpc: Document sysfs DSCR interface
  powerpc: Fix regression of per-CPU DSCR setting
  powerpc: Split __SYSFS_SPRSETUP macro
  arch: powerpc/fadump: Cleaning up inconsistent NULL checks
  ...

Documentation/ABI/stable/sysfs-devices-system-cpu

@@ -0,0 +1,25 @@
+What: 		/sys/devices/system/cpu/dscr_default
+Date:		13-May-2014
+KernelVersion:	v3.15.0
+Contact:
+Description:	Writes are equivalent to writing to
+		/sys/devices/system/cpu/cpuN/dscr on all CPUs.
+		Reads return the last written value or 0.
+		This value is not a global default: it is a way to set
+		all per-CPU defaults at the same time.
+Values:		64 bit unsigned integer (bit field)
+
+What: 		/sys/devices/system/cpu/cpu[0-9]+/dscr
+Date:		13-May-2014
+KernelVersion:	v3.15.0
+Contact:
+Description:	Default value for the Data Stream Control Register (DSCR) on
+		a CPU.
+		This default value is used when the kernel is executing and
+		for any process that has not set the DSCR itself.
+		If a process ever sets the DSCR (via direct access to the
+		SPR) that value will be persisted for that process and used
+		on any CPU where it executes (overriding the value described
+		here).
+		If set by a process it will be inherited by child processes.
+Values:		64 bit unsigned integer (bit field)

Documentation/devicetree/bindings/clock/corenet-clock.txt → Documentation/devicetree/bindings/clock/qoriq-clock.txt

@@ -7,6 +7,14 @@ which can then be passed to a variety of internal logic, including
 cores and peripheral IP blocks.
 Please refer to the Reference Manual for details.
 
+All references to "1.0" and "2.0" refer to the QorIQ chassis version to
+which the chip complies.
+
+Chassis Version		Example Chips
+---------------		-------------
+1.0			p4080, p5020, p5040
+2.0			t4240, b4860, t1040
+
 1. Clock Block Binding
 
 Required properties:
@@ -85,7 +93,7 @@ Example for clock block and clock provider:
 			#clock-cells = <0>;
 			compatible = "fsl,qoriq-sysclk-1.0";
 			clock-output-names = "sysclk";
-		}
+		};
 
 		pll0: pll0@800 {
 			#clock-cells = <1>;

Documentation/devicetree/bindings/mfd/bfticu.txt

@@ -0,0 +1,25 @@
+KEYMILE bfticu Chassis Management FPGA
+
+The bfticu is a multifunction device that manages the whole chassis.
+Its main functionality is to collect IRQs from the whole chassis and signals
+them to a single controller.
+
+Required properties:
+- compatible: "keymile,bfticu"
+- interrupt-controller: the bfticu FPGA is an interrupt controller
+- interrupts: the main IRQ line to signal the collected IRQs
+- #interrupt-cells : is 2 and their usage is compliant to the 2 cells variant
+  of Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
+- interrupt-parent: the parent IRQ ctrl the main IRQ is connected to
+- reg: access on the parent local bus (chip select, offset in chip select, size)
+
+Example:
+
+	chassis-mgmt@3,0 {
+		compatible = "keymile,bfticu";
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		reg = <3 0 0x100>;
+		interrupt-parent = <&mpic>;
+		interrupts = <6 1 0 0>;
+	};

Documentation/devicetree/bindings/mfd/qriox.txt

@@ -0,0 +1,17 @@
+KEYMILE qrio Board Control CPLD
+
+The qrio is a multifunction device that controls the KEYMILE boards based on
+the kmp204x design.
+It is consists of a reset controller, watchdog timer, LEDs, and 2 IRQ capable
+GPIO blocks.
+
+Required properties:
+- compatible: "keymile,qriox"
+- reg: access on the parent local bus (chip select, offset in chip select, size)
+
+Example:
+
+	board-control@1,0 {
+		compatible = "keymile,qriox";
+		reg = <1 0 0x80>;
+	};

Documentation/devicetree/bindings/powerpc/4xx/akebono.txt

@@ -0,0 +1,54 @@
+
+IBM Akebono board device tree
+=============================
+
+The IBM Akebono board is a development board for the PPC476GTR SoC.
+
+0) The root node
+
+   Required properties:
+
+   - model : "ibm,akebono".
+   - compatible : "ibm,akebono" , "ibm,476gtr".
+
+1.a) The Secure Digital Host Controller Interface (SDHCI) node
+
+  Represent the Secure Digital Host Controller Interfaces.
+
+  Required properties:
+
+   - compatible : should be "ibm,476gtr-sdhci","generic-sdhci".
+   - reg : should contain the SDHCI registers location and length.
+   - interrupt-parent : a phandle for the interrupt controller.
+   - interrupts : should contain the SDHCI interrupt.
+
+1.b) The Advanced Host Controller Interface (AHCI) SATA node
+
+  Represents the advanced host controller SATA interface.
+
+  Required properties:
+
+   - compatible : should be "ibm,476gtr-ahci".
+   - reg : should contain the AHCI registers location and length.
+   - interrupt-parent : a phandle for the interrupt controller.
+   - interrupts : should contain the AHCI interrupt.
+
+1.c) The FPGA node
+
+  The Akebono board stores some board information such as the revision
+  number in an FPGA which is represented by this node.
+
+  Required properties:
+
+   - compatible : should be "ibm,akebono-fpga".
+   - reg : should contain the FPGA registers location and length.
+
+1.d) The AVR node
+
+  The Akebono board has an Atmel AVR microprocessor attached to the I2C
+  bus as a power controller for the board.
+
+  Required properties:
+
+   - compatible : should be "ibm,akebono-avr".
+   - reg : should contain the I2C bus address for the AVR.

Documentation/devicetree/bindings/powerpc/4xx/hsta.txt

@@ -0,0 +1,19 @@
+
+ppc476gtr High Speed Serial Assist (HSTA) node
+==============================================
+
+The 476gtr SoC contains a high speed serial assist module attached
+between the plb4 and plb6 system buses to provide high speed data
+transfer between memory and system peripherals as well as support for
+PCI message signalled interrupts.
+
+Currently only the MSI support is used by Linux using the following
+device tree entries:
+
+Require properties:
+- compatible		: "ibm,476gtr-hsta-msi", "ibm,hsta-msi"
+- reg			: register mapping for the HSTA MSI space
+- interrupt-parent	: parent controller for mapping interrupts
+- interrupts		: ordered interrupt mapping for each MSI in the register
+			  space. The first interrupt should be associated with a
+			  register offset of 0x00, the second to 0x10, etc.

Documentation/devicetree/bindings/powerpc/fsl/board.txt

@@ -67,3 +67,20 @@ Example:
 			gpio-controller;
 		};
 	};
+
+* Freescale on-board FPGA connected on I2C bus
+
+Some Freescale boards like BSC9132QDS have on board FPGA connected on
+the i2c bus.
+
+Required properties:
+- compatible: Should be a board-specific string followed by a string
+  indicating the type of FPGA.  Example:
+	"fsl,<board>-fpga", "fsl,fpga-qixis-i2c"
+- reg: Should contain the address of the FPGA
+
+Example:
+	fpga: fpga@66 {
+		compatible = "fsl,bsc9132qds-fpga", "fsl,fpga-qixis-i2c";
+		reg = <0x66>;
+	};

Documentation/devicetree/bindings/powerpc/fsl/ccf.txt

@@ -0,0 +1,46 @@
+Freescale CoreNet Coherency Fabric(CCF) Device Tree Binding
+
+DESCRIPTION
+
+The CoreNet coherency fabric is a fabric-oriented, connectivity infrastructure
+that enables the implementation of coherent, multicore systems.
+
+Required properties:
+
+- compatible: <string list>
+		fsl,corenet1-cf - CoreNet coherency fabric version 1.
+		Example chips: T4240, B4860
+
+		fsl,corenet2-cf - CoreNet coherency fabric version 2.
+		Example chips: P5040, P5020, P4080, P3041, P2041
+
+		fsl,corenet-cf - Used to represent the common registers
+		between CCF version 1 and CCF version 2.  This compatible
+		is retained for compatibility reasons, as it was already
+		used for both CCF version 1 chips and CCF version 2
+		chips.  It should be specified after either
+		"fsl,corenet1-cf" or "fsl,corenet2-cf".
+
+- reg: <prop-encoded-array>
+		A standard property. Represents the CCF registers.
+
+- interrupts: <prop-encoded-array>
+		Interrupt mapping for CCF error interrupt.
+
+- fsl,ccf-num-csdids: <u32>
+		Specifies the number of Coherency Subdomain ID Port Mapping
+		Registers that are supported by the CCF.
+
+- fsl,ccf-num-snoopids: <u32>
+		Specifies the number of Snoop ID Port Mapping Registers that
+		are supported by CCF.
+
+Example:
+
+	corenet-cf@18000 {
+		compatible = "fsl,corenet2-cf", "fsl,corenet-cf";
+		reg = <0x18000 0x1000>;
+		interrupts = <16 2 1 31>;
+		fsl,ccf-num-csdids = <32>;
+		fsl,ccf-num-snoopids = <32>;
+	};

Documentation/devicetree/bindings/powerpc/fsl/cpus.txt

@@ -20,3 +20,14 @@ PROPERTIES
 	a property named fsl,eref-[CAT], where [CAT] is the abbreviated category
 	name with all uppercase letters converted to lowercase, indicates that
 	the category is supported by the implementation.
+
+    - fsl,portid-mapping
+	Usage: optional
+	Value type: <u32>
+	Definition: The Coherency Subdomain ID Port Mapping Registers and
+	Snoop ID Port Mapping registers, which are part of the CoreNet
+	Coherency fabric (CCF), provide a CoreNet Coherency Subdomain
+	ID/CoreNet Snoop ID to cpu mapping functions.  Certain bits from
+	these registers should be set if the coresponding CPU should be
+	snooped.  This property defines a bitmask which selects the bit
+	that should be set if this cpu should be snooped.

Documentation/devicetree/bindings/powerpc/fsl/pamu.txt

@@ -34,6 +34,15 @@ Optional properties:
 		  for legacy drivers.
 - interrupt-parent : <phandle>
 		  Phandle to interrupt controller
+- fsl,portid-mapping : <u32>
+		  The Coherency Subdomain ID Port Mapping Registers and
+		  Snoop ID Port Mapping registers, which are part of the
+		  CoreNet Coherency fabric (CCF), provide a CoreNet
+		  Coherency Subdomain ID/CoreNet Snoop ID to pamu mapping
+		  functions.  Certain bits from these registers should be
+		  set if PAMUs should be snooped.  This property defines
+		  a bitmask which selects the bits that should be set if
+		  PAMUs should be snooped.
 
 Child nodes:
 
@@ -88,6 +97,7 @@ Example:
 		compatible = "fsl,pamu-v1.0", "fsl,pamu";
 		reg = <0x20000 0x5000>;
 		ranges = <0 0x20000 0x5000>;
+		fsl,portid-mapping = <0xf80000>;
 		#address-cells = <1>;
 		#size-cells = <1>;
 		interrupts = <

Documentation/devicetree/bindings/vendor-prefixes.txt

@@ -142,3 +142,4 @@ wm	Wondermedia Technologies, Inc.
 xes	Extreme Engineering Solutions (X-ES)
 xlnx	Xilinx
 zyxel	ZyXEL Communications Corp.
+zarlink	Zarlink Semiconductor

Documentation/powerpc/cpu_families.txt

@@ -0,0 +1,221 @@
+CPU Families
+============
+
+This document tries to summarise some of the different cpu families that exist
+and are supported by arch/powerpc.
+
+
+Book3S (aka sPAPR)
+------------------
+
+ - Hash MMU
+ - Mix of 32 & 64 bit
+
+   +--------------+                 +----------------+
+   |  Old POWER   | --------------> | RS64 (threads) |
+   +--------------+                 +----------------+
+          |
+          |
+          v
+   +--------------+                 +----------------+      +------+
+   |     601      | --------------> |      603       | ---> | e300 |
+   +--------------+                 +----------------+      +------+
+          |                                 |
+          |                                 |
+          v                                 v
+   +--------------+                 +----------------+      +-------+
+   |     604      |                 |    750 (G3)    | ---> | 750CX |
+   +--------------+                 +----------------+      +-------+
+          |                                 |                   |
+          |                                 |                   |
+          v                                 v                   v
+   +--------------+                 +----------------+      +-------+
+   | 620 (64 bit) |                 |      7400      |      | 750CL |
+   +--------------+                 +----------------+      +-------+
+          |                                 |                   |
+          |                                 |                   |
+          v                                 v                   v
+   +--------------+                 +----------------+      +-------+
+   |  POWER3/630  |                 |      7410      |      | 750FX |
+   +--------------+                 +----------------+      +-------+
+          |                                 |
+          |                                 |
+          v                                 v
+   +--------------+                 +----------------+
+   |   POWER3+    |                 |      7450      |
+   +--------------+                 +----------------+
+          |                                 |
+          |                                 |
+          v                                 v
+   +--------------+                 +----------------+
+   |    POWER4    |                 |      7455      |
+   +--------------+                 +----------------+
+          |                                 |
+          |                                 |
+          v                                 v
+   +--------------+     +-------+   +----------------+
+   |   POWER4+    | --> |  970  |   |      7447      |
+   +--------------+     +-------+   +----------------+
+          |                 |               |
+          |                 |               |
+          v                 v               v
+   +--------------+     +-------+   +----------------+
+   |    POWER5    |     | 970FX |   |      7448      |
+   +--------------+     +-------+   +----------------+
+          |                 |               |
+          |                 |               |
+          v                 v               v
+   +--------------+     +-------+   +----------------+
+   |   POWER5+    |     | 970MP |   |      e600      |
+   +--------------+     +-------+   +----------------+
+          |
+          |
+          v
+   +--------------+
+   |   POWER5++   |
+   +--------------+
+          |
+          |
+          v
+   +--------------+       +-------+
+   |    POWER6    | <-?-> | Cell  |
+   +--------------+       +-------+
+          |
+          |
+          v
+   +--------------+
+   |    POWER7    |
+   +--------------+
+          |
+          |
+          v
+   +--------------+
+   |   POWER7+    |
+   +--------------+
+          |
+          |
+          v
+   +--------------+
+   |    POWER8    |
+   +--------------+
+
+
+   +---------------+
+   | PA6T (64 bit) |
+   +---------------+
+
+
+IBM BookE
+---------
+
+ - Software loaded TLB.
+ - All 32 bit
+
+   +--------------+
+   |     401      |
+   +--------------+
+          |
+          |
+          v
+   +--------------+
+   |     403      |
+   +--------------+
+          |
+          |
+          v
+   +--------------+
+   |     405      |
+   +--------------+
+          |
+          |
+          v
+   +--------------+
+   |     440      |
+   +--------------+
+          |
+          |
+          v
+   +--------------+     +----------------+
+   |     450      | --> |      BG/P      |
+   +--------------+     +----------------+
+          |
+          |
+          v
+   +--------------+
+   |     460      |
+   +--------------+
+          |
+          |
+          v
+   +--------------+
+   |     476      |
+   +--------------+
+
+
+Motorola/Freescale 8xx
+----------------------
+
+ - Software loaded with hardware assist.
+ - All 32 bit
+
+   +-------------+
+   | MPC8xx Core |
+   +-------------+
+
+
+Freescale BookE
+---------------
+
+ - Software loaded TLB.
+ - e6500 adds HW loaded indirect TLB entries.
+ - Mix of 32 & 64 bit
+
+   +--------------+
+   |     e200     |
+   +--------------+
+
+
+   +--------------------------------+
+   |              e500              |
+   +--------------------------------+
+                   |
+                   |
+                   v
+   +--------------------------------+
+   |             e500v2             |
+   +--------------------------------+
+                   |
+                   |
+                   v
+   +--------------------------------+
+   |        e500mc (Book3e)         |
+   +--------------------------------+
+                   |
+                   |
+                   v
+   +--------------------------------+
+   |          e5500 (64 bit)        |
+   +--------------------------------+
+                   |
+                   |
+                   v
+   +--------------------------------+
+   | e6500 (HW TLB) (Multithreaded) |
+   +--------------------------------+
+
+
+IBM A2 core
+-----------
+
+ - Book3E, software loaded TLB + HW loaded indirect TLB entries.
+ - 64 bit
+
+   +--------------+     +----------------+
+   |   A2 core    | --> |      WSP       |
+   +--------------+     +----------------+
+           |
+           |
+           v
+   +--------------+
+   |     BG/Q     |
+   +--------------+

arch/powerpc/Kconfig

@@ -453,6 +453,14 @@ config NODES_SHIFT
 	default "4"
 	depends on NEED_MULTIPLE_NODES
 
+config USE_PERCPU_NUMA_NODE_ID
+	def_bool y
+	depends on NUMA
+
+config HAVE_MEMORYLESS_NODES
+	def_bool y
+	depends on NUMA
+
 config ARCH_SELECT_MEMORY_MODEL
 	def_bool y
 	depends on PPC64

arch/powerpc/Makefile

@@ -113,8 +113,13 @@ else
 endif
 endif
 
-CFLAGS-$(CONFIG_PPC64)	:= -mtraceback=no -mcall-aixdesc
-CFLAGS-$(CONFIG_PPC64)	+= $(call cc-option,-mabi=elfv1)
+CFLAGS-$(CONFIG_PPC64)	:= -mtraceback=no
+ifeq ($(CONFIG_CPU_LITTLE_ENDIAN),y)
+CFLAGS-$(CONFIG_PPC64)	+= $(call cc-option,-mabi=elfv2,-mcall-aixdesc)
+AFLAGS-$(CONFIG_PPC64)	+= $(call cc-option,-mabi=elfv2)
+else
+CFLAGS-$(CONFIG_PPC64)	+= -mcall-aixdesc
+endif
 CFLAGS-$(CONFIG_PPC64)	+= $(call cc-option,-mcmodel=medium,-mminimal-toc)
 CFLAGS-$(CONFIG_PPC64)	+= $(call cc-option,-mno-pointers-to-nested-functions)
 CFLAGS-$(CONFIG_PPC32)	:= -ffixed-r2 $(MULTIPLEWORD)
@@ -153,7 +158,7 @@ CFLAGS-$(CONFIG_TUNE_CELL) += $(call cc-option,-mtune=cell)
 asinstr := $(call as-instr,lis 9$(comma)foo@high,-DHAVE_AS_ATHIGH=1)
 
 KBUILD_CPPFLAGS	+= -Iarch/$(ARCH) $(asinstr)
-KBUILD_AFLAGS	+= -Iarch/$(ARCH)
+KBUILD_AFLAGS	+= -Iarch/$(ARCH) $(AFLAGS-y)
 KBUILD_CFLAGS	+= -msoft-float -pipe -Iarch/$(ARCH) $(CFLAGS-y)
 CPP		= $(CC) -E $(KBUILD_CFLAGS)
 
@@ -161,6 +166,11 @@ CHECKFLAGS	+= -m$(CONFIG_WORD_SIZE) -D__powerpc__ -D__powerpc$(CONFIG_WORD_SIZE)
 
 KBUILD_LDFLAGS_MODULE += arch/powerpc/lib/crtsavres.o
 
+ifeq ($(CONFIG_476FPE_ERR46),y)
+	KBUILD_LDFLAGS_MODULE += --ppc476-workaround \
+		-T $(srctree)/arch/powerpc/platforms/44x/ppc476_modules.lds
+endif
+
 # No AltiVec or VSX instructions when building kernel
 KBUILD_CFLAGS += $(call cc-option,-mno-altivec)
 KBUILD_CFLAGS += $(call cc-option,-mno-vsx)

arch/powerpc/boot/Makefile

@@ -22,8 +22,14 @@ all: $(obj)/zImage
 BOOTCFLAGS    := -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs \
 		 -fno-strict-aliasing -Os -msoft-float -pipe \
 		 -fomit-frame-pointer -fno-builtin -fPIC -nostdinc \
-		 -isystem $(shell $(CROSS32CC) -print-file-name=include) \
-		 -mbig-endian
+		 -isystem $(shell $(CROSS32CC) -print-file-name=include)
+ifdef CONFIG_PPC64_BOOT_WRAPPER
+BOOTCFLAGS	+= -m64
+endif
+ifdef CONFIG_CPU_BIG_ENDIAN
+BOOTCFLAGS	+= -mbig-endian
+endif
+
 BOOTAFLAGS	:= -D__ASSEMBLY__ $(BOOTCFLAGS) -traditional -nostdinc
 
 ifdef CONFIG_DEBUG_INFO
@@ -47,6 +53,7 @@ $(obj)/cuboot-acadia.o: BOOTCFLAGS += -mcpu=405
 $(obj)/treeboot-walnut.o: BOOTCFLAGS += -mcpu=405
 $(obj)/treeboot-iss4xx.o: BOOTCFLAGS += -mcpu=405
 $(obj)/treeboot-currituck.o: BOOTCFLAGS += -mcpu=405
+$(obj)/treeboot-akebono.o: BOOTCFLAGS += -mcpu=405
 $(obj)/virtex405-head.o: BOOTAFLAGS += -mcpu=405
 
 
@@ -86,6 +93,7 @@ src-plat-$(CONFIG_44x) += treeboot-ebony.c cuboot-ebony.c treeboot-bamboo.c \
 				cuboot-taishan.c cuboot-katmai.c \
 				cuboot-warp.c cuboot-yosemite.c \
 				treeboot-iss4xx.c treeboot-currituck.c \
+				treeboot-akebono.c \
 				simpleboot.c fixed-head.S virtex.c
 src-plat-$(CONFIG_8xx) += cuboot-8xx.c fixed-head.S ep88xc.c redboot-8xx.c
 src-plat-$(CONFIG_PPC_MPC52xx) += cuboot-52xx.c
@@ -99,6 +107,11 @@ src-plat-$(CONFIG_EMBEDDED6xx) += cuboot-pq2.c cuboot-mpc7448hpc2.c \
 src-plat-$(CONFIG_AMIGAONE) += cuboot-amigaone.c
 src-plat-$(CONFIG_PPC_PS3) += ps3-head.S ps3-hvcall.S ps3.c
 src-plat-$(CONFIG_EPAPR_BOOT) += epapr.c epapr-wrapper.c
+src-plat-$(CONFIG_PPC_PSERIES) += pseries-head.S
+src-plat-$(CONFIG_PPC_POWERNV) += pseries-head.S
+src-plat-$(CONFIG_PPC_IBM_CELL_BLADE) += pseries-head.S
+src-plat-$(CONFIG_PPC_CELLEB) += pseries-head.S
+src-plat-$(CONFIG_PPC_CELL_QPACE) += pseries-head.S
 
 src-wlib := $(sort $(src-wlib-y))
 src-plat := $(sort $(src-plat-y))
@@ -137,7 +150,11 @@ $(addprefix $(obj)/,$(libfdt) $(libfdtheader)): $(obj)/%: $(srctree)/scripts/dtc
 $(obj)/empty.c:
 	@touch $@
 
-$(obj)/zImage.lds $(obj)/zImage.coff.lds $(obj)/zImage.ps3.lds: $(obj)/%: $(srctree)/$(src)/%.S
+$(obj)/zImage.lds: $(obj)/%: $(srctree)/$(src)/%.S
+	$(CROSS32CC) $(cpp_flags) -E -Wp,-MD,$(depfile) -P -Upowerpc \
+		-D__ASSEMBLY__ -DLINKER_SCRIPT -o $@ $<
+
+$(obj)/zImage.coff.lds $(obj)/zImage.ps3.lds : $(obj)/%: $(srctree)/$(src)/%.S
 	@cp $< $@
 
 clean-files := $(zlib) $(zlibheader) $(zliblinuxheader) \
@@ -235,6 +252,7 @@ image-$(CONFIG_YOSEMITE)		+= cuImage.yosemite
 image-$(CONFIG_ISS4xx)			+= treeImage.iss4xx \
 					   treeImage.iss4xx-mpic
 image-$(CONFIG_CURRITUCK)			+= treeImage.currituck
+image-$(CONFIG_AKEBONO)			+= treeImage.akebono
 
 # Board ports in arch/powerpc/platform/8xx/Kconfig
 image-$(CONFIG_MPC86XADS)		+= cuImage.mpc866ads

arch/powerpc/boot/addnote.c

@@ -6,6 +6,8 @@
  *
  * Copyright 2000 Paul Mackerras.
  *
+ * Adapted for 64 bit little endian images by Andrew Tauferner.
+ *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
  * as published by the Free Software Foundation; either version
@@ -55,36 +57,61 @@ unsigned int rpanote[N_RPA_DESCR] = {
 
 #define ROUNDUP(len)	(((len) + 3) & ~3)
 
-unsigned char buf[512];
+unsigned char buf[1024];
+#define ELFDATA2LSB     1
+#define ELFDATA2MSB     2
+static int e_data = ELFDATA2MSB;
+#define ELFCLASS32      1
+#define ELFCLASS64      2
+static int e_class = ELFCLASS32;
 
 #define GET_16BE(off)	((buf[off] << 8) + (buf[(off)+1]))
-#define GET_32BE(off)	((GET_16BE(off) << 16) + GET_16BE((off)+2))
-
-#define PUT_16BE(off, v)	(buf[off] = ((v) >> 8) & 0xff, \
-				 buf[(off) + 1] = (v) & 0xff)
-#define PUT_32BE(off, v)	(PUT_16BE((off), (v) >> 16), \
-				 PUT_16BE((off) + 2, (v)))
+#define GET_32BE(off)	((GET_16BE(off) << 16U) + GET_16BE((off)+2U))
+#define GET_64BE(off)	((((unsigned long long)GET_32BE(off)) << 32ULL) + \
+			((unsigned long long)GET_32BE((off)+4ULL)))
+#define PUT_16BE(off, v)(buf[off] = ((v) >> 8) & 0xff, \
+			 buf[(off) + 1] = (v) & 0xff)
+#define PUT_32BE(off, v)(PUT_16BE((off), (v) >> 16L), PUT_16BE((off) + 2, (v)))
+#define PUT_64BE(off, v)((PUT_32BE((off), (v) >> 32L), \
+			  PUT_32BE((off) + 4, (v))))
+
+#define GET_16LE(off)	((buf[off]) + (buf[(off)+1] << 8))
+#define GET_32LE(off)	(GET_16LE(off) + (GET_16LE((off)+2U) << 16U))
+#define GET_64LE(off)	((unsigned long long)GET_32LE(off) + \
+			(((unsigned long long)GET_32LE((off)+4ULL)) << 32ULL))
+#define PUT_16LE(off, v) (buf[off] = (v) & 0xff, \
+			  buf[(off) + 1] = ((v) >> 8) & 0xff)
+#define PUT_32LE(off, v) (PUT_16LE((off), (v)), PUT_16LE((off) + 2, (v) >> 16L))
+#define PUT_64LE(off, v) (PUT_32LE((off), (v)), PUT_32LE((off) + 4, (v) >> 32L))
+
+#define GET_16(off)	(e_data == ELFDATA2MSB ? GET_16BE(off) : GET_16LE(off))
+#define GET_32(off)	(e_data == ELFDATA2MSB ? GET_32BE(off) : GET_32LE(off))
+#define GET_64(off)	(e_data == ELFDATA2MSB ? GET_64BE(off) : GET_64LE(off))
+#define PUT_16(off, v)	(e_data == ELFDATA2MSB ? PUT_16BE(off, v) : \
+			 PUT_16LE(off, v))
+#define PUT_32(off, v)  (e_data == ELFDATA2MSB ? PUT_32BE(off, v) : \
+			 PUT_32LE(off, v))
+#define PUT_64(off, v)  (e_data == ELFDATA2MSB ? PUT_64BE(off, v) : \
+			 PUT_64LE(off, v))
 
 /* Structure of an ELF file */
 #define E_IDENT		0	/* ELF header */
-#define	E_PHOFF		28
-#define E_PHENTSIZE	42
-#define E_PHNUM		44
-#define E_HSIZE		52	/* size of ELF header */
+#define	E_PHOFF		(e_class == ELFCLASS32 ? 28 : 32)
+#define E_PHENTSIZE	(e_class == ELFCLASS32 ? 42 : 54)
+#define E_PHNUM		(e_class == ELFCLASS32 ? 44 : 56)
+#define E_HSIZE		(e_class == ELFCLASS32 ? 52 : 64)
 
 #define EI_MAGIC	0	/* offsets in E_IDENT area */
 #define EI_CLASS	4
 #define EI_DATA		5
 
 #define PH_TYPE		0	/* ELF program header */
-#define PH_OFFSET	4
-#define PH_FILESZ	16
-#define PH_HSIZE	32	/* size of program header */
+#define PH_OFFSET	(e_class == ELFCLASS32 ? 4 : 8)
+#define PH_FILESZ	(e_class == ELFCLASS32 ? 16 : 32)
+#define PH_HSIZE	(e_class == ELFCLASS32 ? 32 : 56)
 
 #define PT_NOTE		4	/* Program header type = note */
 
-#define ELFCLASS32	1
-#define ELFDATA2MSB	2
 
 unsigned char elf_magic[4] = { 0x7f, 'E', 'L', 'F' };
 
@@ -92,8 +119,8 @@ int
 main(int ac, char **av)
 {
 	int fd, n, i;
-	int ph, ps, np;
-	int nnote, nnote2, ns;
+	unsigned long ph, ps, np;
+	long nnote, nnote2, ns;
 
 	if (ac != 2) {
 		fprintf(stderr, "Usage: %s elf-file\n", av[0]);
@@ -114,26 +141,27 @@ main(int ac, char **av)
 		exit(1);
 	}
 
-	if (n < E_HSIZE || memcmp(&buf[E_IDENT+EI_MAGIC], elf_magic, 4) != 0)
+	if (memcmp(&buf[E_IDENT+EI_MAGIC], elf_magic, 4) != 0)
+		goto notelf;
+	e_class = buf[E_IDENT+EI_CLASS];
+	if (e_class != ELFCLASS32 && e_class != ELFCLASS64)
+		goto notelf;
+	e_data = buf[E_IDENT+EI_DATA];
+	if (e_data != ELFDATA2MSB && e_data != ELFDATA2LSB)
+		goto notelf;
+	if (n < E_HSIZE)
 		goto notelf;
 
-	if (buf[E_IDENT+EI_CLASS] != ELFCLASS32
-	    || buf[E_IDENT+EI_DATA] != ELFDATA2MSB) {
-		fprintf(stderr, "%s is not a big-endian 32-bit ELF image\n",
-			av[1]);
-		exit(1);
-	}
-
-	ph = GET_32BE(E_PHOFF);
-	ps = GET_16BE(E_PHENTSIZE);
-	np = GET_16BE(E_PHNUM);
+	ph = (e_class == ELFCLASS32 ? GET_32(E_PHOFF) : GET_64(E_PHOFF));
+	ps = GET_16(E_PHENTSIZE);
+	np = GET_16(E_PHNUM);
 	if (ph < E_HSIZE || ps < PH_HSIZE || np < 1)
 		goto notelf;
 	if (ph + (np + 2) * ps + nnote + nnote2 > n)
 		goto nospace;
 
 	for (i = 0; i < np; ++i) {
-		if (GET_32BE(ph + PH_TYPE) == PT_NOTE) {
+		if (GET_32(ph + PH_TYPE) == PT_NOTE) {
 			fprintf(stderr, "%s already has a note entry\n",
 				av[1]);
 			exit(0);
@@ -148,15 +176,22 @@ main(int ac, char **av)
 
 	/* fill in the program header entry */
 	ns = ph + 2 * ps;
-	PUT_32BE(ph + PH_TYPE, PT_NOTE);
-	PUT_32BE(ph + PH_OFFSET, ns);
-	PUT_32BE(ph + PH_FILESZ, nnote);
+	PUT_32(ph + PH_TYPE, PT_NOTE);
+	if (e_class == ELFCLASS32)
+		PUT_32(ph + PH_OFFSET, ns);
+	else
+		PUT_64(ph + PH_OFFSET, ns);
+
+	if (e_class == ELFCLASS32)
+		PUT_32(ph + PH_FILESZ, nnote);
+	else
+		PUT_64(ph + PH_FILESZ, nnote);
 
 	/* fill in the note area we point to */
 	/* XXX we should probably make this a proper section */
-	PUT_32BE(ns, strlen(arch) + 1);
-	PUT_32BE(ns + 4, N_DESCR * 4);
-	PUT_32BE(ns + 8, 0x1275);
+	PUT_32(ns, strlen(arch) + 1);
+	PUT_32(ns + 4, N_DESCR * 4);
+	PUT_32(ns + 8, 0x1275);
 	strcpy((char *) &buf[ns + 12], arch);
 	ns += 12 + strlen(arch) + 1;
 	for (i = 0; i < N_DESCR; ++i, ns += 4)
@@ -164,21 +199,28 @@ main(int ac, char **av)
 
 	/* fill in the second program header entry and the RPA note area */
 	ph += ps;
-	PUT_32BE(ph + PH_TYPE, PT_NOTE);
-	PUT_32BE(ph + PH_OFFSET, ns);
-	PUT_32BE(ph + PH_FILESZ, nnote2);
+	PUT_32(ph + PH_TYPE, PT_NOTE);
+	if (e_class == ELFCLASS32)
+		PUT_32(ph + PH_OFFSET, ns);
+	else
+		PUT_64(ph + PH_OFFSET, ns);
+
+	if (e_class == ELFCLASS32)
+		PUT_32(ph + PH_FILESZ, nnote);
+	else
+		PUT_64(ph + PH_FILESZ, nnote2);
 
 	/* fill in the note area we point to */
-	PUT_32BE(ns, strlen(rpaname) + 1);
-	PUT_32BE(ns + 4, sizeof(rpanote));
-	PUT_32BE(ns + 8, 0x12759999);
+	PUT_32(ns, strlen(rpaname) + 1);
+	PUT_32(ns + 4, sizeof(rpanote));
+	PUT_32(ns + 8, 0x12759999);
 	strcpy((char *) &buf[ns + 12], rpaname);
 	ns += 12 + ROUNDUP(strlen(rpaname) + 1);
 	for (i = 0; i < N_RPA_DESCR; ++i, ns += 4)
 		PUT_32BE(ns, rpanote[i]);
 
 	/* Update the number of program headers */
-	PUT_16BE(E_PHNUM, np + 2);
+	PUT_16(E_PHNUM, np + 2);
 
 	/* write back */
 	lseek(fd, (long) 0, SEEK_SET);

arch/powerpc/boot/crt0.S

@@ -1,17 +1,20 @@
 /*
  * Copyright (C) Paul Mackerras 1997.
  *
+ * Adapted for 64 bit LE PowerPC by Andrew Tauferner
+ *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
  * as published by the Free Software Foundation; either version
  * 2 of the License, or (at your option) any later version.
  *
- * NOTE: this code runs in 32 bit mode, is position-independent,
- * and is packaged as ELF32.
  */
 
 #include "ppc_asm.h"
 
+RELA = 7
+RELACOUNT = 0x6ffffff9
+
 	.text
 	/* A procedure descriptor used when booting this as a COFF file.
 	 * When making COFF, this comes first in the link and we're
@@ -21,6 +24,20 @@
 _zimage_start_opd:
 	.long	0x500000, 0, 0, 0
 
+#ifdef __powerpc64__
+.balign 8
+p_start:	.llong	_start
+p_etext:	.llong	_etext
+p_bss_start:	.llong	__bss_start
+p_end:		.llong	_end
+
+p_toc:		.llong	__toc_start + 0x8000 - p_base
+p_dyn:		.llong	__dynamic_start - p_base
+p_rela:		.llong	__rela_dyn_start - p_base
+p_prom:		.llong	0
+	.weak	_platform_stack_top
+p_pstack:	.llong	_platform_stack_top
+#else
 p_start:	.long	_start
 p_etext:	.long	_etext
 p_bss_start:	.long	__bss_start
@@ -28,6 +45,7 @@ p_end:		.long	_end
 
 	.weak	_platform_stack_top
 p_pstack:	.long	_platform_stack_top
+#endif
 
 	.weak	_zimage_start
 	.globl	_zimage_start
@@ -38,6 +56,7 @@ _zimage_start_lib:
 	   and the address where we're running. */
 	bl	.+4
 p_base:	mflr	r10		/* r10 now points to runtime addr of p_base */
+#ifndef __powerpc64__
 	/* grab the link address of the dynamic section in r11 */
 	addis	r11,r10,(_GLOBAL_OFFSET_TABLE_-p_base)@ha
 	lwz	r11,(_GLOBAL_OFFSET_TABLE_-p_base)@l(r11)
@@ -51,8 +70,6 @@ p_base:	mflr	r10		/* r10 now points to runtime addr of p_base */
 
 	/* The dynamic section contains a series of tagged entries.
 	 * We need the RELA and RELACOUNT entries. */
-RELA = 7
-RELACOUNT = 0x6ffffff9
 	li	r9,0
 	li	r0,0
 9:	lwz	r8,0(r12)	/* get tag */
@@ -120,9 +137,164 @@ RELACOUNT = 0x6ffffff9
 	li	r0,0
 	stwu	r0,-16(r1)	/* establish a stack frame */
 6:
+#else /* __powerpc64__ */
+	/* Save the prom pointer at p_prom. */
+	std	r5,(p_prom-p_base)(r10)
+
+	/* Set r2 to the TOC. */
+	ld	r2,(p_toc-p_base)(r10)
+	add	r2,r2,r10
+
+	/* Grab the link address of the dynamic section in r11. */
+	ld	r11,-32768(r2)
+	cmpwi	r11,0
+	beq	3f              /* if not linked -pie then no dynamic section */
+
+	ld	r11,(p_dyn-p_base)(r10)
+	add	r11,r11,r10
+	ld	r9,(p_rela-p_base)(r10)
+	add	r9,r9,r10
 
+	li	r7,0
+	li	r8,0
+9:	ld	r6,0(r11)       /* get tag */
+	cmpdi	r6,0
+	beq	12f              /* end of list */
+	cmpdi	r6,RELA
+	bne	10f
+	ld	r7,8(r11)       /* get RELA pointer in r7 */
+	b	11f
+10:	addis	r6,r6,(-RELACOUNT)@ha
+	cmpdi	r6,RELACOUNT@l
+	bne	11f
+	ld	r8,8(r11)       /* get RELACOUNT value in r8 */
+11:	addi	r11,r11,16
+	b	9b
+12:
+	cmpdi	r7,0            /* check we have both RELA and RELACOUNT */
+	cmpdi	cr1,r8,0
+	beq	3f
+	beq	cr1,3f
+
+	/* Calcuate the runtime offset. */
+	subf	r7,r7,r9
+
+	/* Run through the list of relocations and process the
+	 * R_PPC64_RELATIVE ones. */
+	mtctr	r8
+13:	ld	r0,8(r9)        /* ELF64_R_TYPE(reloc->r_info) */
+	cmpdi	r0,22           /* R_PPC64_RELATIVE */
+	bne	3f
+	ld	r6,0(r9)        /* reloc->r_offset */
+	ld	r0,16(r9)       /* reloc->r_addend */
+	add	r0,r0,r7
+	stdx	r0,r7,r6
+	addi	r9,r9,24
+	bdnz	13b
+
+	/* Do a cache flush for our text, in case the loader didn't */
+3:	ld	r9,p_start-p_base(r10)	/* note: these are relocated now */
+	ld	r8,p_etext-p_base(r10)
+4:	dcbf	r0,r9
+	icbi	r0,r9
+	addi	r9,r9,0x20
+	cmpld	cr0,r9,r8
+	blt	4b
+	sync
+	isync
+
+	/* Clear the BSS */
+	ld	r9,p_bss_start-p_base(r10)
+	ld	r8,p_end-p_base(r10)
+	li	r0,0
+5:	std	r0,0(r9)
+	addi	r9,r9,8
+	cmpld	cr0,r9,r8
+	blt	5b
+
+	/* Possibly set up a custom stack */
+	ld	r8,p_pstack-p_base(r10)
+	cmpdi	r8,0
+	beq	6f
+	ld	r1,0(r8)
+	li	r0,0
+	stdu	r0,-16(r1)	/* establish a stack frame */
+6:
+#endif  /* __powerpc64__ */
 	/* Call platform_init() */
 	bl	platform_init
 
 	/* Call start */
 	b	start
+
+#ifdef __powerpc64__
+
+#define PROM_FRAME_SIZE 512
+#define SAVE_GPR(n, base)       std     n,8*(n)(base)
+#define REST_GPR(n, base)       ld      n,8*(n)(base)
+#define SAVE_2GPRS(n, base)     SAVE_GPR(n, base); SAVE_GPR(n+1, base)
+#define SAVE_4GPRS(n, base)     SAVE_2GPRS(n, base); SAVE_2GPRS(n+2, base)
+#define SAVE_8GPRS(n, base)     SAVE_4GPRS(n, base); SAVE_4GPRS(n+4, base)
+#define SAVE_10GPRS(n, base)    SAVE_8GPRS(n, base); SAVE_2GPRS(n+8, base)
+#define REST_2GPRS(n, base)     REST_GPR(n, base); REST_GPR(n+1, base)
+#define REST_4GPRS(n, base)     REST_2GPRS(n, base); REST_2GPRS(n+2, base)
+#define REST_8GPRS(n, base)     REST_4GPRS(n, base); REST_4GPRS(n+4, base)
+#define REST_10GPRS(n, base)    REST_8GPRS(n, base); REST_2GPRS(n+8, base)
+
+/* prom handles the jump into and return from firmware.  The prom args pointer
+   is loaded in r3. */
+.globl prom
+prom:
+	mflr	r0
+	std	r0,16(r1)
+	stdu	r1,-PROM_FRAME_SIZE(r1) /* Save SP and create stack space */
+
+	SAVE_GPR(2, r1)
+	SAVE_GPR(13, r1)
+	SAVE_8GPRS(14, r1)
+	SAVE_10GPRS(22, r1)
+	mfcr    r10
+	std     r10,8*32(r1)
+	mfmsr   r10
+	std     r10,8*33(r1)
+
+	/* remove MSR_LE from msr but keep MSR_SF */
+	mfmsr	r10
+	rldicr	r10,r10,0,62
+	mtsrr1	r10
+
+	/* Load FW address, set LR to label 1, and jump to FW */
+	bl	0f
+0:	mflr	r10
+	addi	r11,r10,(1f-0b)
+	mtlr	r11
+
+	ld	r10,(p_prom-0b)(r10)
+	mtsrr0	r10
+
+	rfid
+
+1:	/* Return from OF */
+	FIXUP_ENDIAN
+
+	/* Restore registers and return. */
+	rldicl  r1,r1,0,32
+
+	/* Restore the MSR (back to 64 bits) */
+	ld      r10,8*(33)(r1)
+	mtmsr	r10
+	isync
+
+	/* Restore other registers */
+	REST_GPR(2, r1)
+	REST_GPR(13, r1)
+	REST_8GPRS(14, r1)
+	REST_10GPRS(22, r1)
+	ld      r10,8*32(r1)
+	mtcr	r10
+
+	addi    r1,r1,PROM_FRAME_SIZE
+	ld      r0,16(r1)
+	mtlr    r0
+	blr
+#endif

arch/powerpc/boot/dcr.h

@@ -15,6 +15,10 @@
 		asm volatile("mfdcrx %0,%1" : "=r"(rval) : "r"(rn)); \
 		rval; \
 	})
+#define mtdcrx(rn, val) \
+	({	\
+		asm volatile("mtdcrx %0,%1" : : "r"(rn), "r" (val)); \
+	})
 
 /* 440GP/440GX SDRAM controller DCRs */
 #define DCRN_SDRAM0_CFGADDR				0x010

arch/powerpc/boot/dts/akebono.dts

@@ -0,0 +1,415 @@
+/*
+ * Device Tree Source for IBM Embedded PPC 476 Platform
+ *
+ * Copyright © 2013 Tony Breeds IBM Corporation
+ * Copyright © 2013 Alistair Popple IBM Corporation
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without
+ * any warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+/memreserve/ 0x01f00000 0x00100000;	// spin table
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <2>;
+	model = "ibm,akebono";
+	compatible = "ibm,akebono", "ibm,476gtr";
+	dcr-parent = <&{/cpus/cpu@0}>;
+
+	aliases {
+		serial0 = &UART0;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			model = "PowerPC,476";
+			reg = <0>;
+			clock-frequency = <1600000000>; // 1.6 GHz
+			timebase-frequency = <100000000>; // 100Mhz
+			i-cache-line-size = <32>;
+			d-cache-line-size = <32>;
+			i-cache-size = <32768>;
+			d-cache-size = <32768>;
+			dcr-controller;
+			dcr-access-method = "native";
+			status = "ok";
+		};
+		cpu@1 {
+			device_type = "cpu";
+			model = "PowerPC,476";
+			reg = <1>;
+			clock-frequency = <1600000000>; // 1.6 GHz
+			timebase-frequency = <100000000>; // 100Mhz
+			i-cache-line-size = <32>;
+			d-cache-line-size = <32>;
+			i-cache-size = <32768>;
+			d-cache-size = <32768>;
+			dcr-controller;
+			dcr-access-method = "native";
+			status = "disabled";
+			enable-method = "spin-table";
+			cpu-release-addr = <0x0 0x01f00000>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x0>; // filled in by zImage
+	};
+
+	MPIC: interrupt-controller {
+		compatible = "chrp,open-pic";
+		interrupt-controller;
+		dcr-reg = <0xffc00000 0x00040000>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+		single-cpu-affinity;
+	};
+
+	plb {
+		compatible = "ibm,plb6";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		clock-frequency = <200000000>; // 200Mhz
+
+		HSTA0: hsta@310000e0000 {
+			compatible = "ibm,476gtr-hsta-msi", "ibm,hsta-msi";
+			reg = <0x310 0x000e0000 0x0 0xf0>;
+			interrupt-parent = <&MPIC>;
+			interrupts = <108 0
+				      109 0
+				      110 0
+				      111 0
+				      112 0
+				      113 0
+				      114 0
+				      115 0
+				      116 0
+				      117 0
+				      118 0
+				      119 0
+				      120 0
+				      121 0
+				      122 0
+				      123 0>;
+		};
+
+		MAL0: mcmal {
+			compatible = "ibm,mcmal-476gtr", "ibm,mcmal2";
+			dcr-reg = <0xc0000000 0x062>;
+			num-tx-chans = <1>;
+			num-rx-chans = <1>;
+			#address-cells = <0>;
+			#size-cells = <0>;
+			interrupt-parent = <&MPIC>;
+			interrupts = <	/*TXEOB*/ 77 0x4
+					/*RXEOB*/ 78 0x4
+					/*SERR*/  76 0x4
+					/*TXDE*/  79 0x4
+					/*RXDE*/  80 0x4>;
+		};
+
+		SATA0: sata@30000010000 {
+			compatible = "ibm,476gtr-ahci";
+			reg = <0x300 0x00010000 0x0 0x10000>;
+			interrupt-parent = <&MPIC>;
+			interrupts = <93 2>;
+		};
+
+		EHCI0: ehci@30010000000 {
+			compatible = "ibm,476gtr-ehci", "generic-ehci";
+			reg = <0x300 0x10000000 0x0 0x10000>;
+			interrupt-parent = <&MPIC>;
+			interrupts = <85 2>;
+		};
+
+		SD0: sd@30000000000 {
+			compatible = "ibm,476gtr-sdhci", "generic-sdhci";
+			reg = <0x300 0x00000000 0x0 0x10000>;
+			interrupts = <91 2>;
+			interrupt-parent = <&MPIC>;
+		};
+
+		OHCI0: ohci@30010010000 {
+			compatible = "ibm,476gtr-ohci", "generic-ohci";
+			reg = <0x300 0x10010000 0x0 0x10000>;
+			interrupt-parent = <&MPIC>;
+			interrupts = <89 1>;
+			};
+
+		OHCI1: ohci@30010020000 {
+			compatible = "ibm,476gtr-ohci", "generic-ohci";
+			reg = <0x300 0x10020000 0x0 0x10000>;
+			interrupt-parent = <&MPIC>;
+			interrupts = <88 1>;
+			};
+
+		POB0: opb {
+			compatible = "ibm,opb-4xx", "ibm,opb";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			/* Wish there was a nicer way of specifying a full
+			 * 32-bit range
+			 */
+			ranges = <0x00000000 0x0000033f 0x00000000 0x80000000
+				  0x80000000 0x0000033f 0x80000000 0x80000000>;
+			clock-frequency = <100000000>;
+
+			RGMII0: emac-rgmii-wol@50004 {
+				compatible = "ibm,rgmii-wol-476gtr", "ibm,rgmii-wol";
+				reg = <0x50004 0x00000008>;
+				has-mdio;
+			};
+
+			EMAC0: ethernet@30000 {
+				device_type = "network";
+				compatible = "ibm,emac-476gtr", "ibm,emac4sync";
+				interrupt-parent = <&EMAC0>;
+				interrupts = <0x0 0x1>;
+				#interrupt-cells = <1>;
+				#address-cells = <0>;
+				#size-cells = <0>;
+				interrupt-map = </*Status*/ 0x0 &MPIC 81 0x4
+						 /*Wake*/   0x1 &MPIC 82 0x4>;
+				reg = <0x30000 0x78>;
+
+				/* local-mac-address will normally be added by
+				 * the wrapper. If your device doesn't support
+				 * passing data to the wrapper (in the form
+				 * local-mac-addr=<hwaddr>) then you will need
+				 * to set it manually here. */
+				//local-mac-address = [000000000000];
+
+				mal-device = <&MAL0>;
+				mal-tx-channel = <0>;
+				mal-rx-channel = <0>;
+				cell-index = <0>;
+				max-frame-size = <9000>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
+				rx-fifo-size-gige = <16384>;
+				phy-mode = "rgmii";
+				phy-map = <0x00000000>;
+				rgmii-wol-device = <&RGMII0>;
+				has-inverted-stacr-oc;
+				has-new-stacr-staopc;
+			};
+
+			UART0: serial@10000 {
+				device_type = "serial";
+				compatible = "ns16750", "ns16550";
+				reg = <0x10000 0x00000008>;
+				virtual-reg = <0xe8010000>;
+				clock-frequency = <1851851>;
+				current-speed = <38400>;
+				interrupt-parent = <&MPIC>;
+				interrupts = <39 2>;
+			};
+
+			IIC0: i2c@00000000 {
+				compatible = "ibm,iic-476gtr", "ibm,iic";
+				reg = <0x0 0x00000020>;
+				interrupt-parent = <&MPIC>;
+				interrupts = <37 2>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				rtc@68 {
+					compatible = "stm,m41t80", "m41st85";
+					reg = <0x68>;
+				};
+			};
+
+			IIC1: i2c@00000100 {
+				compatible = "ibm,iic-476gtr", "ibm,iic";
+				reg = <0x100 0x00000020>;
+				interrupt-parent = <&MPIC>;
+				interrupts = <38 2>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				avr@58 {
+					compatible = "ibm,akebono-avr";
+					reg = <0x58>;
+				};
+			};
+
+			FPGA0: fpga@ebc00000 {
+				compatible = "ibm,akebono-fpga";
+				reg = <0xebc00000 0x8>;
+			};
+		};
+
+		PCIE0: pciex@10100000000 {
+			device_type = "pci";
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			compatible = "ibm,plb-pciex-476fpe", "ibm,plb-pciex";
+			primary;
+			port = <0x0>; /* port number */
+			reg = <0x00000101 0x00000000 0x0 0x10000000	       /* Config space access */
+			       0x00000100 0x00000000 0x0 0x00001000>;	/* UTL Registers space access */
+			dcr-reg = <0xc0 0x20>;
+
+//                                pci_space  < pci_addr          > < cpu_addr          > < size       >
+			ranges = <0x02000000 0x00000000 0x80000000 0x00000110 0x80000000 0x0 0x80000000
+			          0x01000000 0x0        0x0        0x00000140 0x0        0x0 0x00010000>;
+
+			/* Inbound starting at 0x0 to 0x40000000000. In order to use MSI
+			 * PCI devices must be able to write to the HSTA module.
+			 */
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x400 0x0>;
+
+			/* This drives busses 0 to 0xf */
+			bus-range = <0x0 0xf>;
+
+			/* Legacy interrupts (note the weird polarity, the bridge seems
+			 * to invert PCIe legacy interrupts).
+			 * We are de-swizzling here because the numbers are actually for
+			 * port of the root complex virtual P2P bridge. But I want
+			 * to avoid putting a node for it in the tree, so the numbers
+			 * below are basically de-swizzled numbers.
+			 * The real slot is on idsel 0, so the swizzling is 1:1
+			 */
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+			interrupt-map = <
+				0x0 0x0 0x0 0x1 &MPIC 45 0x2 /* int A */
+				0x0 0x0 0x0 0x2 &MPIC 46 0x2 /* int B */
+				0x0 0x0 0x0 0x3 &MPIC 47 0x2 /* int C */
+				0x0 0x0 0x0 0x4 &MPIC 48 0x2 /* int D */>;
+		};
+
+		PCIE1: pciex@20100000000 {
+			device_type = "pci";
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			compatible = "ibm,plb-pciex-476fpe", "ibm,plb-pciex";
+			primary;
+			port = <0x1>; /* port number */
+			reg = <0x00000201 0x00000000 0x0 0x10000000	       /* Config space access */
+			       0x00000200 0x00000000 0x0 0x00001000>;	/* UTL Registers space access */
+			dcr-reg = <0x100 0x20>;
+
+//                                pci_space  < pci_addr          > < cpu_addr          > < size       >
+			ranges = <0x02000000 0x00000000 0x80000000 0x00000210 0x80000000 0x0 0x80000000
+			          0x01000000 0x0        0x0        0x00000240 0x0        0x0 0x00010000>;
+
+			/* Inbound starting at 0x0 to 0x40000000000. In order to use MSI
+			 * PCI devices must be able to write to the HSTA module.
+			 */
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x400 0x0>;
+
+			/* This drives busses 0 to 0xf */
+			bus-range = <0x0 0xf>;
+
+			/* Legacy interrupts (note the weird polarity, the bridge seems
+			 * to invert PCIe legacy interrupts).
+			 * We are de-swizzling here because the numbers are actually for
+			 * port of the root complex virtual P2P bridge. But I want
+			 * to avoid putting a node for it in the tree, so the numbers
+			 * below are basically de-swizzled numbers.
+			 * The real slot is on idsel 0, so the swizzling is 1:1
+			 */
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+			interrupt-map = <
+				0x0 0x0 0x0 0x1 &MPIC 53 0x2 /* int A */
+				0x0 0x0 0x0 0x2 &MPIC 54 0x2 /* int B */
+				0x0 0x0 0x0 0x3 &MPIC 55 0x2 /* int C */
+				0x0 0x0 0x0 0x4 &MPIC 56 0x2 /* int D */>;
+		};
+
+		PCIE2: pciex@18100000000 {
+			device_type = "pci";
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			compatible = "ibm,plb-pciex-476fpe", "ibm,plb-pciex";
+			primary;
+			port = <0x2>; /* port number */
+			reg = <0x00000181 0x00000000 0x0 0x10000000	       /* Config space access */
+			       0x00000180 0x00000000 0x0 0x00001000>;	/* UTL Registers space access */
+			dcr-reg = <0xe0 0x20>;
+
+//                                pci_space  < pci_addr          > < cpu_addr          > < size       >
+			ranges = <0x02000000 0x00000000 0x80000000 0x00000190 0x80000000 0x0 0x80000000
+			          0x01000000 0x0        0x0        0x000001c0 0x0        0x0 0x00010000>;
+
+			/* Inbound starting at 0x0 to 0x40000000000. In order to use MSI
+			 * PCI devices must be able to write to the HSTA module.
+			 */
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x400 0x0>;
+
+			/* This drives busses 0 to 0xf */
+			bus-range = <0x0 0xf>;
+
+			/* Legacy interrupts (note the weird polarity, the bridge seems
+			 * to invert PCIe legacy interrupts).
+			 * We are de-swizzling here because the numbers are actually for
+			 * port of the root complex virtual P2P bridge. But I want
+			 * to avoid putting a node for it in the tree, so the numbers
+			 * below are basically de-swizzled numbers.
+			 * The real slot is on idsel 0, so the swizzling is 1:1
+			 */
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+			interrupt-map = <
+				0x0 0x0 0x0 0x1 &MPIC 61 0x2 /* int A */
+				0x0 0x0 0x0 0x2 &MPIC 62 0x2 /* int B */
+				0x0 0x0 0x0 0x3 &MPIC 63 0x2 /* int C */
+				0x0 0x0 0x0 0x4 &MPIC 64 0x2 /* int D */>;
+		};
+
+		PCIE3: pciex@28100000000 {
+			device_type = "pci";
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			compatible = "ibm,plb-pciex-476fpe", "ibm,plb-pciex";
+			primary;
+			port = <0x3>; /* port number */
+			reg = <0x00000281 0x00000000 0x0 0x10000000	       /* Config space access */
+			       0x00000280 0x00000000 0x0 0x00001000>;	/* UTL Registers space access */
+			dcr-reg = <0x120 0x20>;
+
+//                                pci_space  < pci_addr          > < cpu_addr          > < size       >
+			ranges = <0x02000000 0x00000000 0x80000000 0x00000290 0x80000000 0x0 0x80000000
+			          0x01000000 0x0        0x0        0x000002c0 0x0        0x0 0x00010000>;
+
+			/* Inbound starting at 0x0 to 0x40000000000. In order to use MSI
+			 * PCI devices must be able to write to the HSTA module.
+			 */
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x400 0x0>;
+
+			/* This drives busses 0 to 0xf */
+			bus-range = <0x0 0xf>;
+
+			/* Legacy interrupts (note the weird polarity, the bridge seems
+			 * to invert PCIe legacy interrupts).
+			 * We are de-swizzling here because the numbers are actually for
+			 * port of the root complex virtual P2P bridge. But I want
+			 * to avoid putting a node for it in the tree, so the numbers
+			 * below are basically de-swizzled numbers.
+			 * The real slot is on idsel 0, so the swizzling is 1:1
+			 */
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+			interrupt-map = <
+				0x0 0x0 0x0 0x1 &MPIC 69 0x2 /* int A */
+				0x0 0x0 0x0 0x2 &MPIC 70 0x2 /* int B */
+				0x0 0x0 0x0 0x3 &MPIC 71 0x2 /* int C */
+				0x0 0x0 0x0 0x4 &MPIC 72 0x2 /* int D */>;
+		};
+	};
+
+	chosen {
+		linux,stdout-path = &UART0;
+	};
+};

arch/powerpc/boot/dts/b4860emu.dts

@@ -61,21 +61,25 @@
 			device_type = "cpu";
 			reg = <0 1>;
 			next-level-cache = <&L2>;
+			fsl,portid-mapping = <0x80000000>;
 		};
 		cpu1: PowerPC,e6500@2 {
 			device_type = "cpu";
 			reg = <2 3>;
 			next-level-cache = <&L2>;
+			fsl,portid-mapping = <0x80000000>;
 		};
 		cpu2: PowerPC,e6500@4 {
 			device_type = "cpu";
 			reg = <4 5>;
 			next-level-cache = <&L2>;
+			fsl,portid-mapping = <0x80000000>;
 		};
 		cpu3: PowerPC,e6500@6 {
 			device_type = "cpu";
 			reg = <6 7>;
 			next-level-cache = <&L2>;
+			fsl,portid-mapping = <0x80000000>;
 		};
 	};
 };
@@ -157,7 +161,7 @@
 	};
 
 	corenet-cf@18000 {
-		compatible = "fsl,b4-corenet-cf";
+		compatible = "fsl,corenet2-cf", "fsl,corenet-cf";
 		reg = <0x18000 0x1000>;
 		interrupts = <16 2 1 0>;
 		fsl,ccf-num-csdids = <32>;
@@ -167,6 +171,7 @@
 	iommu@20000 {
 		compatible = "fsl,pamu-v1.0", "fsl,pamu";
 		reg = <0x20000 0x4000>;
+		fsl,portid-mapping = <0x8000>;
 		#address-cells = <1>;
 		#size-cells = <1>;
 		interrupts = <

arch/powerpc/boot/dts/bsc9132qds.dts

@@ -0,0 +1,35 @@
+/*
+ * BSC9132 QDS Device Tree Source
+ *
+ * Copyright 2014 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/include/ "fsl/bsc9132si-pre.dtsi"
+
+/ {
+	model = "fsl,bsc9132qds";
+	compatible = "fsl,bsc9132qds";
+
+	memory {
+		device_type = "memory";
+	};
+
+	ifc: ifc@ff71e000 {
+		/* NOR, NAND Flash on board */
+		ranges = <0x0 0x0 0x0 0x88000000 0x08000000
+			  0x1 0x0 0x0 0xff800000 0x00010000>;
+		reg = <0x0 0xff71e000 0x0 0x2000>;
+	};
+
+	soc: soc@ff700000 {
+		ranges = <0x0 0x0 0xff700000 0x100000>;
+	};
+};
+
+/include/ "bsc9132qds.dtsi"
+/include/ "fsl/bsc9132si-post.dtsi"

arch/powerpc/boot/dts/bsc9132qds.dtsi

@@ -0,0 +1,101 @@
+/*
+ * BSC9132 QDS Device Tree Source stub (no addresses or top-level ranges)
+ *
+ * Copyright 2014 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&ifc {
+	nor@0,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "cfi-flash";
+		reg = <0x0 0x0 0x8000000>;
+		bank-width = <2>;
+		device-width = <1>;
+	};
+
+	nand@1,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "fsl,ifc-nand";
+		reg = <0x1 0x0 0x4000>;
+	};
+};
+
+&soc {
+	spi@7000 {
+		flash@0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "spansion,s25sl12801";
+			reg = <0>;
+			spi-max-frequency = <30000000>;
+		};
+	};
+
+	i2c@3000 {
+		fpga: fpga@66 {
+			compatible = "fsl,bsc9132qds-fpga", "fsl,fpga-qixis-i2c";
+			reg = <0x66>;
+		};
+	};
+
+	usb@22000 {
+		phy_type = "ulpi";
+	};
+
+	mdio@24000 {
+		phy0: ethernet-phy@0 {
+			reg = <0x0>;
+		};
+
+		phy1: ethernet-phy@1 {
+			reg = <0x1>;
+		};
+
+		tbi0: tbi-phy@11 {
+			reg = <0x1f>;
+			device_type = "tbi-phy";
+		};
+	};
+
+	enet0: ethernet@b0000 {
+		phy-handle = <&phy0>;
+		tbi-handle = <&tbi0>;
+		phy-connection-type = "sgmii";
+	};
+
+	enet1: ethernet@b1000 {
+		phy-handle = <&phy1>;
+		tbi-handle = <&tbi0>;
+		phy-connection-type = "sgmii";
+	};
+};

arch/powerpc/boot/dts/fsl/b4420si-post.dtsi

@@ -76,10 +76,6 @@
 		compatible = "fsl,b4420-l3-cache-controller", "cache";
 	};
 
-	corenet-cf@18000 {
-		compatible = "fsl,b4420-corenet-cf";
-	};
-
 	guts: global-utilities@e0000 {
 		compatible = "fsl,b4420-device-config", "fsl,qoriq-device-config-2.0";
 	};

arch/powerpc/boot/dts/fsl/b4420si-pre.dtsi

@@ -66,12 +66,14 @@
 			reg = <0 1>;
 			clocks = <&mux0>;
 			next-level-cache = <&L2>;
+			fsl,portid-mapping = <0x80000000>;
 		};
 		cpu1: PowerPC,e6500@2 {
 			device_type = "cpu";
 			reg = <2 3>;
 			clocks = <&mux0>;
 			next-level-cache = <&L2>;
+			fsl,portid-mapping = <0x80000000>;
 		};
 	};
 };

arch/powerpc/boot/dts/fsl/b4860si-post.dtsi

@@ -120,10 +120,6 @@
 		compatible = "fsl,b4860-l3-cache-controller", "cache";
 	};
 
-	corenet-cf@18000 {
-		compatible = "fsl,b4860-corenet-cf";
-	};
-
 	guts: global-utilities@e0000 {
 		compatible = "fsl,b4860-device-config", "fsl,qoriq-device-config-2.0";
 	};

arch/powerpc/boot/dts/fsl/b4860si-pre.dtsi

@@ -66,24 +66,28 @@
 			reg = <0 1>;
 			clocks = <&mux0>;
 			next-level-cache = <&L2>;
+			fsl,portid-mapping = <0x80000000>;
 		};
 		cpu1: PowerPC,e6500@2 {
 			device_type = "cpu";
 			reg = <2 3>;
 			clocks = <&mux0>;
 			next-level-cache = <&L2>;
+			fsl,portid-mapping = <0x80000000>;
 		};
 		cpu2: PowerPC,e6500@4 {
 			device_type = "cpu";
 			reg = <4 5>;
 			clocks = <&mux0>;
 			next-level-cache = <&L2>;
+			fsl,portid-mapping = <0x80000000>;
 		};
 		cpu3: PowerPC,e6500@6 {
 			device_type = "cpu";
 			reg = <6 7>;
 			clocks = <&mux0>;
 			next-level-cache = <&L2>;
+			fsl,portid-mapping = <0x80000000>;
 		};
 	};
 };

arch/powerpc/boot/dts/fsl/b4si-post.dtsi

@@ -158,7 +158,7 @@
 	};
 
 	corenet-cf@18000 {
-		compatible = "fsl,b4-corenet-cf";
+		compatible = "fsl,corenet2-cf", "fsl,corenet-cf";
 		reg = <0x18000 0x1000>;
 		interrupts = <16 2 1 0>;
 		fsl,ccf-num-csdids = <32>;
@@ -168,6 +168,7 @@
 	iommu@20000 {
 		compatible =  "fsl,pamu-v1.0", "fsl,pamu";
 		reg = <0x20000 0x4000>;
+		fsl,portid-mapping = <0x8000>;
 		#address-cells = <1>;
 		#size-cells = <1>;
 		interrupts = <

arch/powerpc/boot/dts/fsl/bsc9132si-post.dtsi

@@ -0,0 +1,185 @@
+/*
+ * BSC9132 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2014 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&ifc {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	compatible = "fsl,ifc", "simple-bus";
+	/* FIXME: Test whether interrupts are split */
+	interrupts = <16 2 0 0 20 2 0 0>;
+};
+
+&soc {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	device_type = "soc";
+	compatible = "fsl,bsc9132-immr", "simple-bus";
+	bus-frequency = <0>;		// Filled out by uboot.
+
+	ecm-law@0 {
+		compatible = "fsl,ecm-law";
+		reg = <0x0 0x1000>;
+		fsl,num-laws = <12>;
+	};
+
+	ecm@1000 {
+		compatible = "fsl,bsc9132-ecm", "fsl,ecm";
+		reg = <0x1000 0x1000>;
+		interrupts = <16 2 0 0>;
+	};
+
+	memory-controller@2000 {
+		compatible = "fsl,bsc9132-memory-controller";
+		reg = <0x2000 0x1000>;
+		interrupts = <16 2 1 8>;
+	};
+
+/include/ "pq3-i2c-0.dtsi"
+	i2c@3000 {
+		interrupts = <17 2 0 0>;
+	};
+
+/include/ "pq3-i2c-1.dtsi"
+	i2c@3100 {
+		interrupts = <17 2 0 0>;
+	};
+
+/include/ "pq3-duart-0.dtsi"
+	serial0: serial@4500 {
+		interrupts = <18 2 0 0>;
+	};
+
+	serial1: serial@4600 {
+		interrupts = <18 2 0 0 >;
+	};
+/include/ "pq3-espi-0.dtsi"
+	spi0: spi@7000 {
+		fsl,espi-num-chipselects = <1>;
+		interrupts = <22 0x2 0 0>;
+	};
+
+/include/ "pq3-gpio-0.dtsi"
+	gpio-controller@f000 {
+		interrupts = <19 0x2 0 0>;
+		};
+
+	L2: l2-cache-controller@20000 {
+		compatible = "fsl,bsc9132-l2-cache-controller";
+		reg = <0x20000 0x1000>;
+		cache-line-size = <32>;	// 32 bytes
+		cache-size = <0x40000>; // L2,256K
+		interrupts = <16 2 1 0>;
+	};
+
+/include/ "pq3-dma-0.dtsi"
+
+dma@21300 {
+
+	dma-channel@0 {
+		interrupts = <62 2 0 0>;
+	};
+
+	dma-channel@80 {
+		interrupts = <63 2 0 0>;
+	};
+
+	dma-channel@100 {
+		interrupts = <64 2 0 0>;
+	};
+
+	dma-channel@180 {
+		interrupts = <65 2 0 0>;
+	};
+};
+
+/include/ "pq3-usb2-dr-0.dtsi"
+usb@22000 {
+	compatible = "fsl-usb2-dr","fsl-usb2-dr-v2.2";
+	interrupts = <40 0x2 0 0>;
+};
+
+/include/ "pq3-esdhc-0.dtsi"
+	sdhc@2e000 {
+		fsl,sdhci-auto-cmd12;
+		interrupts = <41 0x2 0 0>;
+	};
+
+/include/ "pq3-sec4.4-0.dtsi"
+crypto@30000 {
+	interrupts	 = <57 2 0 0>;
+
+	sec_jr0: jr@1000 {
+		interrupts	 = <58 2 0 0>;
+	};
+
+	sec_jr1: jr@2000 {
+		interrupts	 = <59 2 0 0>;
+	};
+
+	sec_jr2: jr@3000 {
+		interrupts	 = <60 2 0 0>;
+	};
+
+	sec_jr3: jr@4000 {
+		interrupts	 = <61 2 0 0>;
+	};
+};
+
+/include/ "pq3-mpic.dtsi"
+/include/ "pq3-mpic-timer-B.dtsi"
+
+/include/ "pq3-etsec2-0.dtsi"
+enet0: ethernet@b0000 {
+	queue-group@b0000 {
+		fsl,rx-bit-map = <0xff>;
+		fsl,tx-bit-map = <0xff>;
+		interrupts = <26 2 0 0 27 2 0 0 28 2 0 0>;
+	};
+};
+
+/include/ "pq3-etsec2-1.dtsi"
+enet1: ethernet@b1000 {
+	queue-group@b1000 {
+		fsl,rx-bit-map = <0xff>;
+		fsl,tx-bit-map = <0xff>;
+		interrupts = <33 2 0 0 34 2 0 0 35 2 0 0>;
+	};
+};
+
+global-utilities@e0000 {
+		compatible = "fsl,bsc9132-guts";
+		reg = <0xe0000 0x1000>;
+		fsl,has-rstcr;
+	};
+};

arch/powerpc/boot/dts/fsl/bsc9132si-pre.dtsi

@@ -0,0 +1,66 @@
+/*
+ * BSC9132 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2014 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+/include/ "e500v2_power_isa.dtsi"
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	aliases {
+		serial0 = &serial0;
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: PowerPC,e500v2@0 {
+			device_type = "cpu";
+			reg = <0x0>;
+			next-level-cache = <&L2>;
+		};
+
+		cpu1: PowerPC,e500v2@1 {
+			device_type = "cpu";
+			reg = <0x1>;
+			next-level-cache = <&L2>;
+		};
+	};
+};

arch/powerpc/boot/dts/fsl/p2041si-post.dtsi

@@ -246,7 +246,7 @@
 	};
 
 	corenet-cf@18000 {
-		compatible = "fsl,corenet-cf";
+		compatible = "fsl,corenet1-cf", "fsl,corenet-cf";
 		reg = <0x18000 0x1000>;
 		interrupts = <16 2 1 31>;
 		fsl,ccf-num-csdids = <32>;
@@ -262,6 +262,7 @@
 		interrupts = <
 			24 2 0 0
 			16 2 1 30>;
+		fsl,portid-mapping = <0x0f000000>;
 
 		pamu0: pamu@0 {
 			reg = <0 0x1000>;

arch/powerpc/boot/dts/fsl/p2041si-pre.dtsi

@@ -83,6 +83,7 @@
 			reg = <0>;
 			clocks = <&mux0>;
 			next-level-cache = <&L2_0>;
+			fsl,portid-mapping = <0x80000000>;
 			L2_0: l2-cache {
 				next-level-cache = <&cpc>;
 			};
@@ -92,6 +93,7 @@
 			reg = <1>;
 			clocks = <&mux1>;
 			next-level-cache = <&L2_1>;
+			fsl,portid-mapping = <0x40000000>;
 			L2_1: l2-cache {
 				next-level-cache = <&cpc>;
 			};
@@ -101,6 +103,7 @@
 			reg = <2>;
 			clocks = <&mux2>;
 			next-level-cache = <&L2_2>;
+			fsl,portid-mapping = <0x20000000>;
 			L2_2: l2-cache {
 				next-level-cache = <&cpc>;
 			};
@@ -110,6 +113,7 @@
 			reg = <3>;
 			clocks = <&mux3>;
 			next-level-cache = <&L2_3>;
+			fsl,portid-mapping = <0x10000000>;
 			L2_3: l2-cache {
 				next-level-cache = <&cpc>;
 			};

arch/powerpc/boot/dts/fsl/p3041si-post.dtsi

@@ -273,7 +273,7 @@
 	};
 
 	corenet-cf@18000 {
-		compatible = "fsl,corenet-cf";
+		compatible = "fsl,corenet1-cf", "fsl,corenet-cf";
 		reg = <0x18000 0x1000>;
 		interrupts = <16 2 1 31>;
 		fsl,ccf-num-csdids = <32>;
@@ -289,6 +289,7 @@
 		interrupts = <
 			24 2 0 0
 			16 2 1 30>;
+		fsl,portid-mapping = <0x0f000000>;
 
 		pamu0: pamu@0 {
 			reg = <0 0x1000>;

arch/powerpc/boot/dts/fsl/p3041si-pre.dtsi

@@ -84,6 +84,7 @@
 			reg = <0>;
 			clocks = <&mux0>;
 			next-level-cache = <&L2_0>;
+			fsl,portid-mapping = <0x80000000>;
 			L2_0: l2-cache {
 				next-level-cache = <&cpc>;
 			};
@@ -93,6 +94,7 @@
 			reg = <1>;
 			clocks = <&mux1>;
 			next-level-cache = <&L2_1>;
+			fsl,portid-mapping = <0x40000000>;
 			L2_1: l2-cache {
 				next-level-cache = <&cpc>;
 			};
@@ -102,6 +104,7 @@
 			reg = <2>;
 			clocks = <&mux2>;
 			next-level-cache = <&L2_2>;
+			fsl,portid-mapping = <0x20000000>;
 			L2_2: l2-cache {
 				next-level-cache = <&cpc>;
 			};
@@ -111,6 +114,7 @@
 			reg = <3>;
 			clocks = <&mux3>;
 			next-level-cache = <&L2_3>;
+			fsl,portid-mapping = <0x10000000>;
 			L2_3: l2-cache {
 				next-level-cache = <&cpc>;
 			};

arch/powerpc/boot/dts/fsl/p4080si-post.dtsi

@@ -281,7 +281,7 @@
 	};
 
 	corenet-cf@18000 {
-		compatible = "fsl,corenet-cf";
+		compatible = "fsl,corenet1-cf", "fsl,corenet-cf";
 		reg = <0x18000 0x1000>;
 		interrupts = <16 2 1 31>;
 		fsl,ccf-num-csdids = <32>;
@@ -297,6 +297,7 @@
 		interrupts = <
 			24 2 0 0
 			16 2 1 30>;
+		fsl,portid-mapping = <0x00f80000>;
 
 		pamu0: pamu@0 {
 			reg = <0 0x1000>;

arch/powerpc/boot/dts/fsl/p4080si-pre.dtsi

@@ -83,6 +83,7 @@
 			reg = <0>;
 			clocks = <&mux0>;
 			next-level-cache = <&L2_0>;
+			fsl,portid-mapping = <0x80000000>;
 			L2_0: l2-cache {
 				next-level-cache = <&cpc>;
 			};
@@ -92,6 +93,7 @@
 			reg = <1>;
 			clocks = <&mux1>;
 			next-level-cache = <&L2_1>;
+			fsl,portid-mapping = <0x40000000>;
 			L2_1: l2-cache {
 				next-level-cache = <&cpc>;
 			};
@@ -101,6 +103,7 @@
 			reg = <2>;
 			clocks = <&mux2>;
 			next-level-cache = <&L2_2>;
+			fsl,portid-mapping = <0x20000000>;
 			L2_2: l2-cache {
 				next-level-cache = <&cpc>;
 			};
@@ -110,6 +113,7 @@
 			reg = <3>;
 			clocks = <&mux3>;
 			next-level-cache = <&L2_3>;
+			fsl,portid-mapping = <0x10000000>;
 			L2_3: l2-cache {
 				next-level-cache = <&cpc>;
 			};
@@ -119,6 +123,7 @@
 			reg = <4>;
 			clocks = <&mux4>;
 			next-level-cache = <&L2_4>;
+			fsl,portid-mapping = <0x08000000>;
 			L2_4: l2-cache {
 				next-level-cache = <&cpc>;
 			};
@@ -128,6 +133,7 @@
 			reg = <5>;
 			clocks = <&mux5>;
 			next-level-cache = <&L2_5>;
+			fsl,portid-mapping = <0x04000000>;
 			L2_5: l2-cache {
 				next-level-cache = <&cpc>;
 			};
@@ -137,6 +143,7 @@
 			reg = <6>;
 			clocks = <&mux6>;
 			next-level-cache = <&L2_6>;
+			fsl,portid-mapping = <0x02000000>;
 			L2_6: l2-cache {
 				next-level-cache = <&cpc>;
 			};
@@ -146,6 +153,7 @@
 			reg = <7>;
 			clocks = <&mux7>;
 			next-level-cache = <&L2_7>;
+			fsl,portid-mapping = <0x01000000>;
 			L2_7: l2-cache {
 				next-level-cache = <&cpc>;
 			};

arch/powerpc/boot/dts/fsl/p5020si-post.dtsi

@@ -278,7 +278,7 @@
 	};
 
 	corenet-cf@18000 {
-		compatible = "fsl,corenet-cf";
+		compatible = "fsl,corenet1-cf", "fsl,corenet-cf";
 		reg = <0x18000 0x1000>;
 		interrupts = <16 2 1 31>;
 		fsl,ccf-num-csdids = <32>;
@@ -294,6 +294,7 @@
 		interrupts = <
 			24 2 0 0
 			16 2 1 30>;
+		fsl,portid-mapping = <0x3c000000>;
 
 		pamu0: pamu@0 {
 			reg = <0 0x1000>;

arch/powerpc/boot/dts/fsl/p5020si-pre.dtsi

@@ -90,6 +90,7 @@
 			reg = <0>;
 			clocks = <&mux0>;
 			next-level-cache = <&L2_0>;
+			fsl,portid-mapping = <0x80000000>;
 			L2_0: l2-cache {
 				next-level-cache = <&cpc>;
 			};
@@ -99,6 +100,7 @@
 			reg = <1>;
 			clocks = <&mux1>;
 			next-level-cache = <&L2_1>;
+			fsl,portid-mapping = <0x40000000>;
 			L2_1: l2-cache {
 				next-level-cache = <&cpc>;
 			};

arch/powerpc/boot/dts/fsl/p5040si-post.dtsi

@@ -233,7 +233,7 @@
 	};
 
 	corenet-cf@18000 {
-		compatible = "fsl,corenet-cf";
+		compatible = "fsl,corenet1-cf", "fsl,corenet-cf";
 		reg = <0x18000 0x1000>;
 		interrupts = <16 2 1 31>;
 		fsl,ccf-num-csdids = <32>;
@@ -248,6 +248,7 @@
 		#size-cells = <1>;
 		interrupts = <24 2 0 0
 			      16 2 1 30>;
+		fsl,portid-mapping = <0x0f800000>;
 
 		pamu0: pamu@0 {
 			reg = <0 0x1000>;

arch/powerpc/boot/dts/fsl/p5040si-pre.dtsi

@@ -83,6 +83,7 @@
 			reg = <0>;
 			clocks = <&mux0>;
 			next-level-cache = <&L2_0>;
+			fsl,portid-mapping = <0x80000000>;
 			L2_0: l2-cache {
 				next-level-cache = <&cpc>;
 			};
@@ -92,6 +93,7 @@
 			reg = <1>;
 			clocks = <&mux1>;
 			next-level-cache = <&L2_1>;
+			fsl,portid-mapping = <0x40000000>;
 			L2_1: l2-cache {
 				next-level-cache = <&cpc>;
 			};
@@ -101,6 +103,7 @@
 			reg = <2>;
 			clocks = <&mux2>;
 			next-level-cache = <&L2_2>;
+			fsl,portid-mapping = <0x20000000>;
 			L2_2: l2-cache {
 				next-level-cache = <&cpc>;
 			};
@@ -110,6 +113,7 @@
 			reg = <3>;
 			clocks = <&mux3>;
 			next-level-cache = <&L2_3>;
+			fsl,portid-mapping = <0x10000000>;
 			L2_3: l2-cache {
 				next-level-cache = <&cpc>;
 			};

arch/powerpc/boot/dts/fsl/t1040si-post.dtsi

@@ -0,0 +1,430 @@
+/*
+ * T1040 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2013 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&ifc {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	compatible = "fsl,ifc", "simple-bus";
+	interrupts = <25 2 0 0>;
+};
+
+&pci0 {
+	compatible = "fsl,t1040-pcie", "fsl,qoriq-pcie-v2.4", "fsl,qoriq-pcie";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0x0 0xff>;
+	interrupts = <20 2 0 0>;
+	fsl,iommu-parent = <&pamu0>;
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <20 2 0 0>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0 0 1 &mpic 40 1 0 0
+			0000 0 0 2 &mpic 1 1 0 0
+			0000 0 0 3 &mpic 2 1 0 0
+			0000 0 0 4 &mpic 3 1 0 0
+			>;
+	};
+};
+
+&pci1 {
+	compatible = "fsl,t1040-pcie", "fsl,qoriq-pcie-v2.4", "fsl,qoriq-pcie";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0 0xff>;
+	interrupts = <21 2 0 0>;
+	fsl,iommu-parent = <&pamu0>;
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <21 2 0 0>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0 0 1 &mpic 41 1 0 0
+			0000 0 0 2 &mpic 5 1 0 0
+			0000 0 0 3 &mpic 6 1 0 0
+			0000 0 0 4 &mpic 7 1 0 0
+			>;
+	};
+};
+
+&pci2 {
+	compatible = "fsl,t1040-pcie", "fsl,qoriq-pcie-v2.4", "fsl,qoriq-pcie";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0x0 0xff>;
+	interrupts = <22 2 0 0>;
+	fsl,iommu-parent = <&pamu0>;
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <22 2 0 0>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0 0 1 &mpic 42 1 0 0
+			0000 0 0 2 &mpic 9 1 0 0
+			0000 0 0 3 &mpic 10 1 0 0
+			0000 0 0 4 &mpic 11 1 0 0
+			>;
+	};
+};
+
+&pci3 {
+	compatible = "fsl,t1040-pcie", "fsl,qoriq-pcie-v2.4", "fsl,qoriq-pcie";
+	device_type = "pci";
+	#size-cells = <2>;
+	#address-cells = <3>;
+	bus-range = <0x0 0xff>;
+	interrupts = <23 2 0 0>;
+	fsl,iommu-parent = <&pamu0>;
+	pcie@0 {
+		reg = <0 0 0 0 0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		interrupts = <23 2 0 0>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0 0 1 &mpic 43 1 0 0
+			0000 0 0 2 &mpic 0 1 0 0
+			0000 0 0 3 &mpic 4 1 0 0
+			0000 0 0 4 &mpic 8 1 0 0
+			>;
+	};
+};
+
+&dcsr {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "fsl,dcsr", "simple-bus";
+
+	dcsr-epu@0 {
+		compatible = "fsl,t1040-dcsr-epu", "fsl,dcsr-epu";
+		interrupts = <52 2 0 0
+			      84 2 0 0
+			      85 2 0 0>;
+		reg = <0x0 0x1000>;
+	};
+	dcsr-npc {
+		compatible = "fsl,t1040-dcsr-cnpc", "fsl,dcsr-cnpc";
+		reg = <0x1000 0x1000 0x1002000 0x10000>;
+	};
+	dcsr-nxc@2000 {
+		compatible = "fsl,dcsr-nxc";
+		reg = <0x2000 0x1000>;
+	};
+	dcsr-corenet {
+		compatible = "fsl,dcsr-corenet";
+		reg = <0x8000 0x1000 0x1A000 0x1000>;
+	};
+	dcsr-dpaa@9000 {
+		compatible = "fsl,t1040-dcsr-dpaa", "fsl,dcsr-dpaa";
+		reg = <0x9000 0x1000>;
+	};
+	dcsr-ocn@11000 {
+		compatible = "fsl,t1040-dcsr-ocn", "fsl,dcsr-ocn";
+		reg = <0x11000 0x1000>;
+	};
+	dcsr-ddr@12000 {
+		compatible = "fsl,dcsr-ddr";
+		dev-handle = <&ddr1>;
+		reg = <0x12000 0x1000>;
+	};
+	dcsr-nal@18000 {
+		compatible = "fsl,t1040-dcsr-nal", "fsl,dcsr-nal";
+		reg = <0x18000 0x1000>;
+	};
+	dcsr-rcpm@22000 {
+		compatible = "fsl,t1040-dcsr-rcpm", "fsl,dcsr-rcpm";
+		reg = <0x22000 0x1000>;
+	};
+	dcsr-snpc@30000 {
+		compatible = "fsl,t1040-dcsr-snpc", "fsl,dcsr-snpc";
+		reg = <0x30000 0x1000 0x1022000 0x10000>;
+	};
+	dcsr-snpc@31000 {
+		compatible = "fsl,t1040-dcsr-snpc", "fsl,dcsr-snpc";
+		reg = <0x31000 0x1000 0x1042000 0x10000>;
+	};
+	dcsr-cpu-sb-proxy@100000 {
+		compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+		cpu-handle = <&cpu0>;
+		reg = <0x100000 0x1000 0x101000 0x1000>;
+	};
+	dcsr-cpu-sb-proxy@108000 {
+		compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+		cpu-handle = <&cpu1>;
+		reg = <0x108000 0x1000 0x109000 0x1000>;
+	};
+	dcsr-cpu-sb-proxy@110000 {
+		compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+		cpu-handle = <&cpu2>;
+		reg = <0x110000 0x1000 0x111000 0x1000>;
+	};
+	dcsr-cpu-sb-proxy@118000 {
+		compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
+		cpu-handle = <&cpu3>;
+		reg = <0x118000 0x1000 0x119000 0x1000>;
+	};
+};
+
+&soc {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	device_type = "soc";
+	compatible = "simple-bus";
+
+	soc-sram-error {
+		compatible = "fsl,soc-sram-error";
+		interrupts = <16 2 1 29>;
+	};
+
+	corenet-law@0 {
+		compatible = "fsl,corenet-law";
+		reg = <0x0 0x1000>;
+		fsl,num-laws = <16>;
+	};
+
+	ddr1: memory-controller@8000 {
+		compatible = "fsl,qoriq-memory-controller-v5.0",
+				"fsl,qoriq-memory-controller";
+		reg = <0x8000 0x1000>;
+		interrupts = <16 2 1 23>;
+	};
+
+	cpc: l3-cache-controller@10000 {
+		compatible = "fsl,t1040-l3-cache-controller", "cache";
+		reg = <0x10000 0x1000>;
+		interrupts = <16 2 1 27>;
+	};
+
+	corenet-cf@18000 {
+		compatible = "fsl,corenet2-cf", "fsl,corenet-cf";
+		reg = <0x18000 0x1000>;
+		interrupts = <16 2 1 31>;
+		fsl,ccf-num-csdids = <32>;
+		fsl,ccf-num-snoopids = <32>;
+	};
+
+	iommu@20000 {
+		compatible = "fsl,pamu-v1.0", "fsl,pamu";
+		reg = <0x20000 0x1000>;
+		ranges = <0 0x20000 0x1000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		interrupts = <
+			24 2 0 0
+			16 2 1 30>;
+		pamu0: pamu@0 {
+			reg = <0 0x1000>;
+			fsl,primary-cache-geometry = <128 1>;
+			fsl,secondary-cache-geometry = <16 2>;
+		};
+	};
+
+/include/ "qoriq-mpic.dtsi"
+
+	guts: global-utilities@e0000 {
+		compatible = "fsl,t1040-device-config", "fsl,qoriq-device-config-2.0";
+		reg = <0xe0000 0xe00>;
+		fsl,has-rstcr;
+		fsl,liodn-bits = <12>;
+	};
+
+	clockgen: global-utilities@e1000 {
+		compatible = "fsl,t1040-clockgen", "fsl,qoriq-clockgen-2.0";
+		ranges = <0x0 0xe1000 0x1000>;
+		reg = <0xe1000 0x1000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		sysclk: sysclk {
+			#clock-cells = <0>;
+			compatible = "fsl,qoriq-sysclk-2.0";
+			clock-output-names = "sysclk", "fixed-clock";
+		};
+
+
+		pll0: pll0@800 {
+			#clock-cells = <1>;
+			reg = <0x800 4>;
+			compatible = "fsl,qoriq-core-pll-2.0";
+			clocks = <&sysclk>;
+			clock-output-names = "pll0", "pll0-div2", "pll0-div4";
+		};
+
+		pll1: pll1@820 {
+			#clock-cells = <1>;
+			reg = <0x820 4>;
+			compatible = "fsl,qoriq-core-pll-2.0";
+			clocks = <&sysclk>;
+			clock-output-names = "pll1", "pll1-div2", "pll1-div4";
+		};
+
+		mux0: mux0@0 {
+			#clock-cells = <0>;
+			reg = <0x0 4>;
+			compatible = "fsl,qoriq-core-mux-2.0";
+			clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>,
+				 <&pll1 0>, <&pll1 1>, <&pll1 2>;
+			clock-names = "pll0", "pll0-div2", "pll1-div4",
+				"pll1", "pll1-div2", "pll1-div4";
+			clock-output-names = "cmux0";
+		};
+
+		mux1: mux1@20 {
+			#clock-cells = <0>;
+			reg = <0x20 4>;
+			compatible = "fsl,qoriq-core-mux-2.0";
+			clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>,
+				 <&pll1 0>, <&pll1 1>, <&pll1 2>;
+			clock-names = "pll0", "pll0-div2", "pll1-div4",
+				"pll1", "pll1-div2", "pll1-div4";
+			clock-output-names = "cmux1";
+		};
+
+		mux2: mux2@40 {
+			#clock-cells = <0>;
+			reg = <0x40 4>;
+			compatible = "fsl,qoriq-core-mux-2.0";
+			clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>,
+				 <&pll1 0>, <&pll1 1>, <&pll1 2>;
+			clock-names = "pll0", "pll0-div2", "pll1-div4",
+				"pll1", "pll1-div2", "pll1-div4";
+			clock-output-names = "cmux2";
+		};
+
+		mux3: mux3@60 {
+			#clock-cells = <0>;
+			reg = <0x60 4>;
+			compatible = "fsl,qoriq-core-mux-2.0";
+			clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>,
+				 <&pll1 0>, <&pll1 1>, <&pll1 2>;
+			clock-names = "pll0_0", "pll0_1", "pll0_2",
+				"pll1_0", "pll1_1", "pll1_2";
+			clock-output-names = "cmux3";
+		};
+	};
+
+	rcpm: global-utilities@e2000 {
+		compatible = "fsl,t1040-rcpm", "fsl,qoriq-rcpm-2.0";
+		reg = <0xe2000 0x1000>;
+	};
+
+	sfp: sfp@e8000 {
+		compatible = "fsl,t1040-sfp";
+		reg	   = <0xe8000 0x1000>;
+	};
+
+	serdes: serdes@ea000 {
+		compatible = "fsl,t1040-serdes";
+		reg	   = <0xea000 0x4000>;
+	};
+
+/include/ "elo3-dma-0.dtsi"
+/include/ "elo3-dma-1.dtsi"
+/include/ "qoriq-espi-0.dtsi"
+	spi@110000 {
+		fsl,espi-num-chipselects = <4>;
+	};
+
+/include/ "qoriq-esdhc-0.dtsi"
+	sdhc@114000 {
+		compatible = "fsl,t1040-esdhc", "fsl,esdhc";
+		fsl,iommu-parent = <&pamu0>;
+		fsl,liodn-reg = <&guts 0x530>; /* eSDHCLIODNR */
+		sdhci,auto-cmd12;
+	};
+/include/ "qoriq-i2c-0.dtsi"
+/include/ "qoriq-i2c-1.dtsi"
+/include/ "qoriq-duart-0.dtsi"
+/include/ "qoriq-duart-1.dtsi"
+/include/ "qoriq-gpio-0.dtsi"
+/include/ "qoriq-gpio-1.dtsi"
+/include/ "qoriq-gpio-2.dtsi"
+/include/ "qoriq-gpio-3.dtsi"
+/include/ "qoriq-usb2-mph-0.dtsi"
+		usb0: usb@210000 {
+			compatible = "fsl-usb2-mph-v2.4", "fsl-usb2-mph";
+			fsl,iommu-parent = <&pamu0>;
+			fsl,liodn-reg = <&guts 0x520>; /* USB1LIODNR */
+			phy_type = "utmi";
+			port0;
+		};
+/include/ "qoriq-usb2-dr-0.dtsi"
+		usb1: usb@211000 {
+			compatible = "fsl-usb2-dr-v2.4", "fsl-usb2-dr";
+			fsl,iommu-parent = <&pamu0>;
+			fsl,liodn-reg = <&guts 0x524>; /* USB2LIODNR */
+			dr_mode = "host";
+			phy_type = "utmi";
+		};
+
+	display@180000 {
+		compatible = "fsl,t1040-diu", "fsl,diu";
+		reg = <0x180000 1000>;
+		interrupts = <74 2 0 0>;
+	};
+
+/include/ "qoriq-sata2-0.dtsi"
+	sata@220000 {
+		fsl,iommu-parent = <&pamu0>;
+		fsl,liodn-reg = <&guts 0x550>; /* SATA1LIODNR */
+	};
+/include/ "qoriq-sata2-1.dtsi"
+	sata@221000 {
+		fsl,iommu-parent = <&pamu0>;
+		fsl,liodn-reg = <&guts 0x554>; /* SATA2LIODNR */
+	};
+/include/ "qoriq-sec5.0-0.dtsi"
+};

arch/powerpc/boot/dts/fsl/t1042si-post.dtsi

@@ -0,0 +1,37 @@
+/*
+ * T1042 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2013 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "t1040si-post.dtsi"
+
+/* Place holder for ethernet related device tree nodes */

arch/powerpc/boot/dts/fsl/t104xsi-pre.dtsi

@@ -0,0 +1,104 @@
+/*
+ * T1040/T1042 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2013 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+/include/ "e5500_power_isa.dtsi"
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	aliases {
+		ccsr = &soc;
+		dcsr = &dcsr;
+
+		serial0 = &serial0;
+		serial1 = &serial1;
+		serial2 = &serial2;
+		serial3 = &serial3;
+		pci0 = &pci0;
+		pci1 = &pci1;
+		pci2 = &pci2;
+		pci3 = &pci3;
+		usb0 = &usb0;
+		usb1 = &usb1;
+		sdhc = &sdhc;
+
+		crypto = &crypto;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: PowerPC,e5500@0 {
+			device_type = "cpu";
+			reg = <0>;
+			clocks = <&mux0>;
+			next-level-cache = <&L2_1>;
+			L2_1: l2-cache {
+				next-level-cache = <&cpc>;
+			};
+		};
+		cpu1: PowerPC,e5500@1 {
+			device_type = "cpu";
+			reg = <1>;
+			clocks = <&mux1>;
+			next-level-cache = <&L2_2>;
+			L2_2: l2-cache {
+				next-level-cache = <&cpc>;
+			};
+		};
+		cpu2: PowerPC,e5500@2 {
+			device_type = "cpu";
+			reg = <2>;
+			clocks = <&mux2>;
+			next-level-cache = <&L2_3>;
+			L2_3: l2-cache {
+				next-level-cache = <&cpc>;
+			};
+		};
+		cpu3: PowerPC,e5500@3 {
+			device_type = "cpu";
+			reg = <3>;
+			clocks = <&mux3>;
+			next-level-cache = <&L2_4>;
+			L2_4: l2-cache {
+				next-level-cache = <&cpc>;
+			};
+		};
+	};
+};

arch/powerpc/boot/dts/fsl/t4240si-post.dtsi

@@ -343,7 +343,7 @@
 	};
 
 	corenet-cf@18000 {
-		compatible = "fsl,corenet-cf";
+		compatible = "fsl,corenet2-cf", "fsl,corenet-cf";
 		reg = <0x18000 0x1000>;
 		interrupts = <16 2 1 31>;
 		fsl,ccf-num-csdids = <32>;
@@ -353,6 +353,7 @@
 	iommu@20000 {
 		compatible = "fsl,pamu-v1.0", "fsl,pamu";
 		reg = <0x20000 0x6000>;
+		fsl,portid-mapping = <0x8000>;
 		interrupts = <
 			24 2 0 0
 			16 2 1 30>;

arch/powerpc/boot/dts/fsl/t4240si-pre.dtsi

@@ -69,72 +69,84 @@
 			reg = <0 1>;
 			clocks = <&mux0>;
 			next-level-cache = <&L2_1>;
+			fsl,portid-mapping = <0x80000000>;
 		};
 		cpu1: PowerPC,e6500@2 {
 			device_type = "cpu";
 			reg = <2 3>;
 			clocks = <&mux0>;
 			next-level-cache = <&L2_1>;
+			fsl,portid-mapping = <0x80000000>;
 		};
 		cpu2: PowerPC,e6500@4 {
 			device_type = "cpu";
 			reg = <4 5>;
 			clocks = <&mux0>;
 			next-level-cache = <&L2_1>;
+			fsl,portid-mapping = <0x80000000>;
 		};
 		cpu3: PowerPC,e6500@6 {
 			device_type = "cpu";
 			reg = <6 7>;
 			clocks = <&mux0>;
 			next-level-cache = <&L2_1>;
+			fsl,portid-mapping = <0x80000000>;
 		};
 		cpu4: PowerPC,e6500@8 {
 			device_type = "cpu";
 			reg = <8 9>;
 			clocks = <&mux1>;
 			next-level-cache = <&L2_2>;
+			fsl,portid-mapping = <0x40000000>;
 		};
 		cpu5: PowerPC,e6500@10 {
 			device_type = "cpu";
 			reg = <10 11>;
 			clocks = <&mux1>;
 			next-level-cache = <&L2_2>;
+			fsl,portid-mapping = <0x40000000>;
 		};
 		cpu6: PowerPC,e6500@12 {
 			device_type = "cpu";
 			reg = <12 13>;
 			clocks = <&mux1>;
 			next-level-cache = <&L2_2>;
+			fsl,portid-mapping = <0x40000000>;
 		};
 		cpu7: PowerPC,e6500@14 {
 			device_type = "cpu";
 			reg = <14 15>;
 			clocks = <&mux1>;
 			next-level-cache = <&L2_2>;
+			fsl,portid-mapping = <0x40000000>;
 		};
 		cpu8: PowerPC,e6500@16 {
 			device_type = "cpu";
 			reg = <16 17>;
 			clocks = <&mux2>;
 			next-level-cache = <&L2_3>;
+			fsl,portid-mapping = <0x20000000>;
 		};
 		cpu9: PowerPC,e6500@18 {
 			device_type = "cpu";
 			reg = <18 19>;
 			clocks = <&mux2>;
 			next-level-cache = <&L2_3>;
+			fsl,portid-mapping = <0x20000000>;
 		};
 		cpu10: PowerPC,e6500@20 {
 			device_type = "cpu";
 			reg = <20 21>;
 			clocks = <&mux2>;
 			next-level-cache = <&L2_3>;
+			fsl,portid-mapping = <0x20000000>;
 		};
 		cpu11: PowerPC,e6500@22 {
 			device_type = "cpu";
 			reg = <22 23>;
 			clocks = <&mux2>;
 			next-level-cache = <&L2_3>;
+			fsl,portid-mapping = <0x20000000>;
 		};
 	};
 };

arch/powerpc/boot/dts/kmcoge4.dts

@@ -0,0 +1,152 @@
+/*
+ * Keymile kmcoge4 Device Tree Source, based on the P2041RDB DTS
+ *
+ * (C) Copyright 2014
+ * Valentin Longchamp, Keymile AG, valentin.longchamp@keymile.com
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/include/ "fsl/p2041si-pre.dtsi"
+
+/ {
+	model = "keymile,kmcoge4";
+	compatible = "keymile,kmcoge4", "keymile,kmp204x";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	memory {
+		device_type = "memory";
+	};
+
+	dcsr: dcsr@f00000000 {
+		ranges = <0x00000000 0xf 0x00000000 0x01008000>;
+	};
+
+	soc: soc@ffe000000 {
+		ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
+		reg = <0xf 0xfe000000 0 0x00001000>;
+		spi@110000 {
+			flash@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "spansion,s25fl256s1";
+				reg = <0>;
+				spi-max-frequency = <20000000>; /* input clock */
+			};
+
+			network_clock@1 {
+				compatible = "zarlink,zl30343";
+				reg = <1>;
+				spi-max-frequency = <8000000>;
+			};
+
+			flash@2 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "micron,m25p32";
+				reg = <2>;
+				spi-max-frequency = <15000000>;
+			};
+		};
+
+		i2c@119000 {
+			status = "disabled";
+		};
+
+		i2c@119100 {
+			status = "disabled";
+		};
+
+		usb0: usb@210000 {
+			status = "disabled";
+		};
+
+		usb1: usb@211000 {
+			status = "disabled";
+		};
+
+		sata@220000 {
+			status = "disabled";
+		};
+
+		sata@221000 {
+			status = "disabled";
+		};
+	};
+
+	rio: rapidio@ffe0c0000 {
+		status = "disabled";
+	};
+
+	lbc: localbus@ffe124000 {
+		reg = <0xf 0xfe124000 0 0x1000>;
+		ranges = <0 0 0xf 0xffa00000 0x00040000		/* LB 0 */
+			  1 0 0xf 0xfb000000 0x00010000		/* LB 1 */
+			  2 0 0xf 0xd0000000 0x10000000		/* LB 2 */
+			  3 0 0xf 0xe0000000 0x10000000>;	/* LB 3 */
+
+		nand@0,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,elbc-fcm-nand";
+			reg = <0 0 0x40000>;
+		};
+
+		board-control@1,0 {
+			compatible = "keymile,qriox";
+			reg = <1 0 0x80>;
+		};
+
+		chassis-mgmt@3,0 {
+			compatible = "keymile,bfticu";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			reg = <3 0 0x100>;
+			interrupt-parent = <&mpic>;
+			interrupts = <6 1 0 0>;
+		};
+	};
+
+	pci0: pcie@ffe200000 {
+		reg = <0xf 0xfe200000 0 0x1000>;
+		ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000
+			  0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x20000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+	pci1: pcie@ffe201000 {
+		status = "disabled";
+	};
+
+	pci2: pcie@ffe202000 {
+		reg = <0xf 0xfe202000 0 0x1000>;
+		ranges = <0x02000000 0 0xe0000000 0xc 0x20000000 0 0x20000000
+			  0x01000000 0 0x00000000 0xf 0xf8010000 0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x20000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+};
+
+/include/ "fsl/p2041si-post.dtsi"

arch/powerpc/boot/dts/oca4080.dts

@@ -0,0 +1,118 @@
+/*
+ * OCA4080 Device Tree Source
+ *
+ * Copyright 2014 Prodrive Technologies B.V.
+ *
+ * Based on:
+ * P4080DS Device Tree Source
+ * Copyright 2009-2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "fsl/p4080si-pre.dtsi"
+
+/ {
+	model = "fsl,OCA4080";
+	compatible = "fsl,OCA4080";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	memory {
+		device_type = "memory";
+	};
+
+	dcsr: dcsr@f00000000 {
+		ranges = <0x00000000 0xf 0x00000000 0x01008000>;
+	};
+
+	soc: soc@ffe000000 {
+		ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
+		reg = <0xf 0xfe000000 0 0x00001000>;
+
+		i2c@118000 {
+			status = "disabled";
+		};
+
+		i2c@118100 {
+			status = "disabled";
+		};
+
+		i2c@119000 {
+			status = "disabled";
+		};
+
+		i2c@119100 {
+			status = "disabled";
+		};
+
+		usb0: usb@210000 {
+			status = "disabled";
+		};
+
+		usb1: usb@211000 {
+			status = "disabled";
+		};
+	};
+
+	rio: rapidio@ffe0c0000 {
+		reg = <0xf 0xfe0c0000 0 0x11000>;
+
+		port1 {
+			ranges = <0 0 0xc 0x20000000 0 0x10000000>;
+		};
+	};
+
+	lbc: localbus@ffe124000 {
+		reg = <0xf 0xfe124000 0 0x1000>;
+		ranges = <0 0 0xf 0xef800000 0x800000>;
+
+		flash@0,0 {
+			compatible = "cfi-flash";
+			reg = <0 0 0x00800000>;
+			bank-width = <2>;
+			device-width = <2>;
+		};
+	};
+
+	pci0: pcie@ffe200000 {
+		status = "disabled";
+	};
+
+	pci1: pcie@ffe201000 {
+		status = "disabled";
+	};
+
+	pci2: pcie@ffe202000 {
+		status = "disabled";
+	};
+};
+
+/include/ "fsl/p4080si-post.dtsi"

arch/powerpc/boot/dts/p1023rds.dts

@@ -1,219 +0,0 @@
-/*
- * P1023 RDS Device Tree Source
- *
- * Copyright 2010-2011 Freescale Semiconductor Inc.
- *
- * Author: Roy Zang <tie-fei.zang@freescale.com>
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *     * Redistributions of source code must retain the above copyright
- *       notice, this list of conditions and the following disclaimer.
- *     * Redistributions in binary form must reproduce the above copyright
- *       notice, this list of conditions and the following disclaimer in the
- *       documentation and/or other materials provided with the distribution.
- *     * Neither the name of Freescale Semiconductor nor the
- *       names of its contributors may be used to endorse or promote products
- *       derived from this software without specific prior written permission.
- *
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
- * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/include/ "fsl/p1023si-pre.dtsi"
-
-/ {
-	model = "fsl,P1023";
-	compatible = "fsl,P1023RDS";
-	#address-cells = <2>;
-	#size-cells = <2>;
-	interrupt-parent = <&mpic>;
-
-	memory {
-		device_type = "memory";
-	};
-
-	soc: soc@ff600000 {
-		ranges = <0x0 0x0 0xff600000 0x200000>;
-
-		i2c@3000 {
-			rtc@68 {
-				compatible = "dallas,ds1374";
-				reg = <0x68>;
-			};
-		};
-
-		spi@7000 {
-			fsl_dataflash@0 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				compatible = "atmel,at45db081d";
-				reg = <0>;
-				spi-max-frequency = <40000000>; /* input clock */
-				partition@u-boot {
-					/* 512KB for u-boot Bootloader Image */
-					label = "u-boot-spi";
-					reg = <0x00000000 0x00080000>;
-					read-only;
-				};
-				partition@dtb {
-					/* 512KB for DTB Image */
-					label = "dtb-spi";
-					reg = <0x00080000 0x00080000>;
-					read-only;
-				};
-			};
-		};
-
-		usb@22000 {
-			dr_mode = "host";
-			phy_type = "ulpi";
-		};
-	};
-
-	lbc: localbus@ff605000 {
-		reg = <0 0xff605000 0 0x1000>;
-
-		/* NOR Flash, BCSR */
-		ranges = <0x0 0x0 0x0 0xee000000 0x02000000
-			  0x1 0x0 0x0 0xe0000000 0x00008000>;
-
-		nor@0,0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "cfi-flash";
-			reg = <0x0 0x0 0x02000000>;
-			bank-width = <2>;
-			device-width = <1>;
-			partition@0 {
-				label = "ramdisk";
-				reg = <0x00000000 0x01c00000>;
-			};
-			partition@1c00000 {
-				label = "kernel";
-				reg = <0x01c00000 0x002e0000>;
-			};
-			partiton@1ee0000 {
-				label = "dtb";
-				reg = <0x01ee0000 0x00020000>;
-			};
-			partition@1f00000 {
-				label = "firmware";
-				reg = <0x01f00000 0x00080000>;
-				read-only;
-			};
-			partition@1f80000 {
-				label = "u-boot";
-				reg = <0x01f80000 0x00080000>;
-				read-only;
-			};
-		};
-
-		fpga@1,0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,p1023rds-fpga";
-			reg = <1 0 0x8000>;
-			ranges = <0 1 0 0x8000>;
-
-			bcsr@20 {
-				compatible = "fsl,p1023rds-bcsr";
-				reg = <0x20 0x20>;
-			};
-		};
-	};
-
-	pci0: pcie@ff60a000 {
-		reg = <0 0xff60a000 0 0x1000>;
-		ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000
-			  0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x10000>;
-		pcie@0 {
-			/* IRQ[0:3] are pulled up on board, set to active-low */
-			interrupt-map-mask = <0xf800 0 0 7>;
-			interrupt-map = <
-				/* IDSEL 0x0 */
-				0000 0 0 1 &mpic 0 1 0 0
-				0000 0 0 2 &mpic 1 1 0 0
-				0000 0 0 3 &mpic 2 1 0 0
-				0000 0 0 4 &mpic 3 1 0 0
-				>;
-			ranges = <0x2000000 0x0 0xc0000000
-				  0x2000000 0x0 0xc0000000
-				  0x0 0x20000000
-
-				  0x1000000 0x0 0x0
-				  0x1000000 0x0 0x0
-				  0x0 0x100000>;
-		};
-	};
-
-	board_pci1: pci1: pcie@ff609000 {
-		reg = <0 0xff609000 0 0x1000>;
-		ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
-			  0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
-		pcie@0 {
-			/*
-			 * IRQ[4:6] only for PCIe, set to active-high,
-			 * IRQ[7] is pulled up on board, set to active-low
-			 */
-			interrupt-map-mask = <0xf800 0 0 7>;
-			interrupt-map = <
-				/* IDSEL 0x0 */
-				0000 0 0 1 &mpic 4 2 0 0
-				0000 0 0 2 &mpic 5 2 0 0
-				0000 0 0 3 &mpic 6 2 0 0
-				0000 0 0 4 &mpic 7 1 0 0
-				>;
-			ranges = <0x2000000 0x0 0xa0000000
-				  0x2000000 0x0 0xa0000000
-				  0x0 0x20000000
-
-				  0x1000000 0x0 0x0
-				  0x1000000 0x0 0x0
-				  0x0 0x100000>;
-		};
-	};
-
-	pci2: pcie@ff60b000 {
-		reg = <0 0xff60b000 0 0x1000>;
-		ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
-			  0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
-		pcie@0 {
-			/*
-			 * IRQ[8:10] are pulled up on board, set to active-low
-			 * IRQ[11] only for PCIe, set to active-high,
-			 */
-			interrupt-map-mask = <0xf800 0 0 7>;
-			interrupt-map = <
-				/* IDSEL 0x0 */
-				0000 0 0 1 &mpic 8 1 0 0
-				0000 0 0 2 &mpic 9 1 0 0
-				0000 0 0 3 &mpic 10 1 0 0
-				0000 0 0 4 &mpic 11 2 0 0
-				>;
-			ranges = <0x2000000 0x0 0x80000000
-				  0x2000000 0x0 0x80000000
-				  0x0 0x20000000
-
-				  0x1000000 0x0 0x0
-				  0x1000000 0x0 0x0
-				  0x0 0x100000>;
-		};
-	};
-};
-
-/include/ "fsl/p1023si-post.dtsi"

arch/powerpc/boot/dts/t1040qds.dts

@@ -0,0 +1,46 @@
+/*
+ * T1040QDS Device Tree Source
+ *
+ * Copyright 2013 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "fsl/t104xsi-pre.dtsi"
+/include/ "t104xqds.dtsi"
+
+/ {
+	model = "fsl,T1040QDS";
+	compatible = "fsl,T1040QDS";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+};
+
+/include/ "fsl/t1040si-post.dtsi"

arch/powerpc/boot/dts/t1042qds.dts

@@ -0,0 +1,46 @@
+/*
+ * T1042QDS Device Tree Source
+ *
+ * Copyright 2013 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "fsl/t104xsi-pre.dtsi"
+/include/ "t104xqds.dtsi"
+
+/ {
+	model = "fsl,T1042QDS";
+	compatible = "fsl,T1042QDS";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+};
+
+/include/ "fsl/t1042si-post.dtsi"

arch/powerpc/boot/dts/t104xqds.dtsi

@@ -0,0 +1,166 @@
+/*
+ * T104xQDS Device Tree Source
+ *
+ * Copyright 2013 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/ {
+	model = "fsl,T1040QDS";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	ifc: localbus@ffe124000 {
+		reg = <0xf 0xfe124000 0 0x2000>;
+		ranges = <0 0 0xf 0xe8000000 0x08000000
+			  2 0 0xf 0xff800000 0x00010000
+			  3 0 0xf 0xffdf0000 0x00008000>;
+
+		nor@0,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "cfi-flash";
+			reg = <0x0 0x0 0x8000000>;
+
+			bank-width = <2>;
+			device-width = <1>;
+		};
+
+		nand@2,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,ifc-nand";
+			reg = <0x2 0x0 0x10000>;
+		};
+
+		board-control@3,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,fpga-qixis";
+			reg = <3 0 0x300>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+	};
+
+	dcsr: dcsr@f00000000 {
+		ranges = <0x00000000 0xf 0x00000000 0x01072000>;
+	};
+
+	soc: soc@ffe000000 {
+		ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
+		reg = <0xf 0xfe000000 0 0x00001000>;
+
+		spi@110000 {
+			flash@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "micron,n25q128a11";
+				reg = <0>;
+				spi-max-frequency = <10000000>; /* input clock */
+			};
+		};
+
+		i2c@118000 {
+			pca9547@77 {
+				compatible = "philips,pca9547";
+				reg = <0x77>;
+			};
+			rtc@68 {
+				compatible = "dallas,ds3232";
+				reg = <0x68>;
+				interrupts = <0x1 0x1 0 0>;
+			};
+		};
+	};
+
+	pci0: pcie@ffe240000 {
+		reg = <0xf 0xfe240000 0 0x10000>;
+		ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x10000000
+			  0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x10000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+	pci1: pcie@ffe250000 {
+		reg = <0xf 0xfe250000 0 0x10000>;
+		ranges = <0x02000000 0x0 0xe0000000 0xc 0x10000000 0x0 0x10000000
+			  0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x10000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+	pci2: pcie@ffe260000 {
+		reg = <0xf 0xfe260000 0 0x10000>;
+		ranges = <0x02000000 0 0xe0000000 0xc 0x20000000 0 0x10000000
+			  0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x10000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+	pci3: pcie@ffe270000 {
+		reg = <0xf 0xfe270000 0 0x10000>;
+		ranges = <0x02000000 0 0xe0000000 0xc 0x30000000 0 0x10000000
+			  0x01000000 0 0x00000000 0xf 0xf8030000 0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x10000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+};

arch/powerpc/boot/dts/t4240emu.dts

@@ -60,63 +60,75 @@
 			device_type = "cpu";
 			reg = <0 1>;
 			next-level-cache = <&L2_1>;
+			fsl,portid-mapping = <0x80000000>;
 		};
 		cpu1: PowerPC,e6500@2 {
 			device_type = "cpu";
 			reg = <2 3>;
 			next-level-cache = <&L2_1>;
+			fsl,portid-mapping = <0x80000000>;
 		};
 		cpu2: PowerPC,e6500@4 {
 			device_type = "cpu";
 			reg = <4 5>;
 			next-level-cache = <&L2_1>;
+			fsl,portid-mapping = <0x80000000>;
 		};
 		cpu3: PowerPC,e6500@6 {
 			device_type = "cpu";
 			reg = <6 7>;
 			next-level-cache = <&L2_1>;
+			fsl,portid-mapping = <0x80000000>;
 		};
 
 		cpu4: PowerPC,e6500@8 {
 			device_type = "cpu";
 			reg = <8 9>;
 			next-level-cache = <&L2_2>;
+			fsl,portid-mapping = <0x40000000>;
 		};
 		cpu5: PowerPC,e6500@10 {
 			device_type = "cpu";
 			reg = <10 11>;
 			next-level-cache = <&L2_2>;
+			fsl,portid-mapping = <0x40000000>;
 		};
 		cpu6: PowerPC,e6500@12 {
 			device_type = "cpu";
 			reg = <12 13>;
 			next-level-cache = <&L2_2>;
+			fsl,portid-mapping = <0x40000000>;
 		};
 		cpu7: PowerPC,e6500@14 {
 			device_type = "cpu";
 			reg = <14 15>;
 			next-level-cache = <&L2_2>;
+			fsl,portid-mapping = <0x40000000>;
 		};
 
 		cpu8: PowerPC,e6500@16 {
 			device_type = "cpu";
 			reg = <16 17>;
 			next-level-cache = <&L2_3>;
+			fsl,portid-mapping = <0x20000000>;
 		};
 		cpu9: PowerPC,e6500@18 {
 			device_type = "cpu";
 			reg = <18 19>;
 			next-level-cache = <&L2_3>;
+			fsl,portid-mapping = <0x20000000>;
 		};
 		cpu10: PowerPC,e6500@20 {
 			device_type = "cpu";
 			reg = <20 21>;
 			next-level-cache = <&L2_3>;
+			fsl,portid-mapping = <0x20000000>;
 		};
 		cpu11: PowerPC,e6500@22 {
 			device_type = "cpu";
 			reg = <22 23>;
 			next-level-cache = <&L2_3>;
+			fsl,portid-mapping = <0x20000000>;
 		};
 	};
 };
@@ -213,7 +225,7 @@
 	};
 
 	corenet-cf@18000 {
-		compatible = "fsl,corenet-cf";
+		compatible = "fsl,corenet2-cf", "fsl,corenet-cf";
 		reg = <0x18000 0x1000>;
 		interrupts = <16 2 1 31>;
 		fsl,ccf-num-csdids = <32>;
@@ -223,6 +235,7 @@
 	iommu@20000 {
 		compatible = "fsl,pamu-v1.0", "fsl,pamu";
 		reg = <0x20000 0x6000>;
+		fsl,portid-mapping = <0x8000>;
 		interrupts = <
 			24 2 0 0
 			16 2 1 30>;

arch/powerpc/boot/elf_util.c

@@ -26,7 +26,11 @@ int parse_elf64(void *hdr, struct elf_info *info)
 	      elf64->e_ident[EI_MAG2]  == ELFMAG2	&&
 	      elf64->e_ident[EI_MAG3]  == ELFMAG3	&&
 	      elf64->e_ident[EI_CLASS] == ELFCLASS64	&&
+#ifdef __LITTLE_ENDIAN__
+	      elf64->e_ident[EI_DATA]  == ELFDATA2LSB	&&
+#else
 	      elf64->e_ident[EI_DATA]  == ELFDATA2MSB	&&
+#endif
 	      (elf64->e_type            == ET_EXEC ||
 	       elf64->e_type            == ET_DYN)	&&
 	      elf64->e_machine         == EM_PPC64))

arch/powerpc/boot/of.c

@@ -40,8 +40,8 @@ static void *of_try_claim(unsigned long size)
 #ifdef DEBUG
 		printf("    trying: 0x%08lx\n\r", claim_base);
 #endif
-		addr = (unsigned long)of_claim(claim_base, size, 0);
-		if ((void *)addr != (void *)-1)
+		addr = (unsigned long) of_claim(claim_base, size, 0);
+		if (addr != PROM_ERROR)
 			break;
 	}
 	if (addr == 0)

arch/powerpc/boot/of.h

@@ -1,12 +1,15 @@
 #ifndef _PPC_BOOT_OF_H_
 #define _PPC_BOOT_OF_H_
 
+#include "swab.h"
+
 typedef void *phandle;
-typedef void *ihandle;
+typedef u32 ihandle;
 
 void of_init(void *promptr);
 int of_call_prom(const char *service, int nargs, int nret, ...);
-void *of_claim(unsigned long virt, unsigned long size, unsigned long align);
+unsigned int of_claim(unsigned long virt, unsigned long size,
+	unsigned long align);
 void *of_vmlinux_alloc(unsigned long size);
 void of_exit(void);
 void *of_finddevice(const char *name);
@@ -18,4 +21,16 @@ int of_setprop(const void *phandle, const char *name, const void *buf,
 /* Console functions */
 void of_console_init(void);
 
+typedef u32			__be32;
+
+#ifdef __LITTLE_ENDIAN__
+#define cpu_to_be32(x) swab32(x)
+#define be32_to_cpu(x) swab32(x)
+#else
+#define cpu_to_be32(x) (x)
+#define be32_to_cpu(x) (x)
+#endif
+
+#define PROM_ERROR (-1u)
+
 #endif /* _PPC_BOOT_OF_H_ */

arch/powerpc/boot/ofconsole.c

@@ -18,7 +18,7 @@
 
 #include "of.h"
 
-static void *of_stdout_handle;
+static unsigned int of_stdout_handle;
 
 static int of_console_open(void)
 {
@@ -27,8 +27,10 @@ static int of_console_open(void)
 	if (((devp = of_finddevice("/chosen")) != NULL)
 	    && (of_getprop(devp, "stdout", &of_stdout_handle,
 			   sizeof(of_stdout_handle))
-		== sizeof(of_stdout_handle)))
+		== sizeof(of_stdout_handle))) {
+		of_stdout_handle = be32_to_cpu(of_stdout_handle);
 		return 0;
+	}
 
 	return -1;
 }

arch/powerpc/boot/oflib.c

@@ -16,74 +16,83 @@
 
 #include "of.h"
 
+typedef u32 prom_arg_t;
+
+/* The following structure is used to communicate with open firmware.
+ * All arguments in and out are in big endian format. */
+struct prom_args {
+	__be32 service;	/* Address of service name string. */
+	__be32 nargs;	/* Number of input arguments. */
+	__be32 nret;	/* Number of output arguments. */
+	__be32 args[10];	/* Input/output arguments. */
+};
+
+#ifdef __powerpc64__
+extern int prom(void *);
+#else
 static int (*prom) (void *);
+#endif
 
 void of_init(void *promptr)
 {
+#ifndef __powerpc64__
 	prom = (int (*)(void *))promptr;
+#endif
 }
 
+#define ADDR(x)		(u32)(unsigned long)(x)
+
 int of_call_prom(const char *service, int nargs, int nret, ...)
 {
 	int i;
-	struct prom_args {
-		const char *service;
-		int nargs;
-		int nret;
-		unsigned int args[12];
-	} args;
+	struct prom_args args;
 	va_list list;
 
-	args.service = service;
-	args.nargs = nargs;
-	args.nret = nret;
+	args.service = cpu_to_be32(ADDR(service));
+	args.nargs = cpu_to_be32(nargs);
+	args.nret = cpu_to_be32(nret);
 
 	va_start(list, nret);
 	for (i = 0; i < nargs; i++)
-		args.args[i] = va_arg(list, unsigned int);
+		args.args[i] = cpu_to_be32(va_arg(list, prom_arg_t));
 	va_end(list);
 
 	for (i = 0; i < nret; i++)
 		args.args[nargs+i] = 0;
 
 	if (prom(&args) < 0)
-		return -1;
+		return PROM_ERROR;
 
-	return (nret > 0)? args.args[nargs]: 0;
+	return (nret > 0) ? be32_to_cpu(args.args[nargs]) : 0;
 }
 
 static int of_call_prom_ret(const char *service, int nargs, int nret,
-			    unsigned int *rets, ...)
+			    prom_arg_t *rets, ...)
 {
 	int i;
-	struct prom_args {
-		const char *service;
-		int nargs;
-		int nret;
-		unsigned int args[12];
-	} args;
+	struct prom_args args;
 	va_list list;
 
-	args.service = service;
-	args.nargs = nargs;
-	args.nret = nret;
+	args.service = cpu_to_be32(ADDR(service));
+	args.nargs = cpu_to_be32(nargs);
+	args.nret = cpu_to_be32(nret);
 
 	va_start(list, rets);
 	for (i = 0; i < nargs; i++)
-		args.args[i] = va_arg(list, unsigned int);
+		args.args[i] = cpu_to_be32(va_arg(list, prom_arg_t));
 	va_end(list);
 
 	for (i = 0; i < nret; i++)
 		args.args[nargs+i] = 0;
 
 	if (prom(&args) < 0)
-		return -1;
+		return PROM_ERROR;
 
-	if (rets != (void *) 0)
+	if (rets != NULL)
 		for (i = 1; i < nret; ++i)
-			rets[i-1] = args.args[nargs+i];
+			rets[i-1] = be32_to_cpu(args.args[nargs+i]);
 
-	return (nret > 0)? args.args[nargs]: 0;
+	return (nret > 0) ? be32_to_cpu(args.args[nargs]) : 0;
 }
 
 /* returns true if s2 is a prefix of s1 */
@@ -103,7 +112,7 @@ static int string_match(const char *s1, const char *s2)
  */
 static int need_map = -1;
 static ihandle chosen_mmu;
-static phandle memory;
+static ihandle memory;
 
 static int check_of_version(void)
 {
@@ -132,10 +141,10 @@ static int check_of_version(void)
 		printf("no mmu\n");
 		return 0;
 	}
-	memory = (ihandle) of_call_prom("open", 1, 1, "/memory");
-	if (memory == (ihandle) -1) {
-		memory = (ihandle) of_call_prom("open", 1, 1, "/memory@0");
-		if (memory == (ihandle) -1) {
+	memory = of_call_prom("open", 1, 1, "/memory");
+	if (memory == PROM_ERROR) {
+		memory = of_call_prom("open", 1, 1, "/memory@0");
+		if (memory == PROM_ERROR) {
 			printf("no memory node\n");
 			return 0;
 		}
@@ -144,40 +153,41 @@ static int check_of_version(void)
 	return 1;
 }
 
-void *of_claim(unsigned long virt, unsigned long size, unsigned long align)
+unsigned int of_claim(unsigned long virt, unsigned long size,
+		      unsigned long align)
 {
 	int ret;
-	unsigned int result;
+	prom_arg_t result;
 
 	if (need_map < 0)
 		need_map = check_of_version();
 	if (align || !need_map)
-		return (void *) of_call_prom("claim", 3, 1, virt, size, align);
+		return of_call_prom("claim", 3, 1, virt, size, align);
 
 	ret = of_call_prom_ret("call-method", 5, 2, &result, "claim", memory,
 			       align, size, virt);
 	if (ret != 0 || result == -1)
-		return (void *) -1;
+		return  -1;
 	ret = of_call_prom_ret("call-method", 5, 2, &result, "claim", chosen_mmu,
 			       align, size, virt);
 	/* 0x12 == coherent + read/write */
 	ret = of_call_prom("call-method", 6, 1, "map", chosen_mmu,
 			   0x12, size, virt, virt);
-	return (void *) virt;
+	return virt;
 }
 
 void *of_vmlinux_alloc(unsigned long size)
 {
 	unsigned long start = (unsigned long)_start, end = (unsigned long)_end;
-	void *addr;
+	unsigned long addr;
 	void *p;
 
 	/* With some older POWER4 firmware we need to claim the area the kernel
 	 * will reside in.  Newer firmwares don't need this so we just ignore
 	 * the return value.
 	 */
-	addr = of_claim(start, end - start, 0);
-	printf("Trying to claim from 0x%lx to 0x%lx (0x%lx) got %p\r\n",
+	addr = (unsigned long) of_claim(start, end - start, 0);
+	printf("Trying to claim from 0x%lx to 0x%lx (0x%lx) got %lx\r\n",
 	       start, end, end - start, addr);
 
 	p = malloc(size);
@@ -197,7 +207,7 @@ void of_exit(void)
  */
 void *of_finddevice(const char *name)
 {
-	return (phandle) of_call_prom("finddevice", 1, 1, name);
+	return (void *) (unsigned long) of_call_prom("finddevice", 1, 1, name);
 }
 
 int of_getprop(const void *phandle, const char *name, void *buf,

arch/powerpc/boot/ppc_asm.h

@@ -62,4 +62,16 @@
 #define SPRN_TBRL	268
 #define SPRN_TBRU	269
 
+#define FIXUP_ENDIAN						   \
+	tdi   0, 0, 0x48; /* Reverse endian of b . + 8		*/ \
+	b     $+36;	  /* Skip trampoline if endian is good	*/ \
+	.long 0x05009f42; /* bcl 20,31,$+4			*/ \
+	.long 0xa602487d; /* mflr r10				*/ \
+	.long 0x1c004a39; /* addi r10,r10,28			*/ \
+	.long 0xa600607d; /* mfmsr r11				*/ \
+	.long 0x01006b69; /* xori r11,r11,1			*/ \
+	.long 0xa6035a7d; /* mtsrr0 r10				*/ \
+	.long 0xa6037b7d; /* mtsrr1 r11				*/ \
+	.long 0x2400004c  /* rfid				*/
+
 #endif /* _PPC64_PPC_ASM_H */

arch/powerpc/boot/pseries-head.S

@@ -0,0 +1,8 @@
+#include "ppc_asm.h"
+
+	.text
+
+	.globl _zimage_start
+_zimage_start:
+	FIXUP_ENDIAN
+	b _zimage_start_lib

arch/powerpc/boot/stdio.c

@@ -21,6 +21,18 @@ size_t strnlen(const char * s, size_t count)
 	return sc - s;
 }
 
+#ifdef __powerpc64__
+
+# define do_div(n, base) ({						\
+	unsigned int __base = (base);					\
+	unsigned int __rem;						\
+	__rem = ((unsigned long long)(n)) % __base;			\
+	(n) = ((unsigned long long)(n)) / __base;			\
+	__rem;								\
+})
+
+#else
+
 extern unsigned int __div64_32(unsigned long long *dividend,
 			       unsigned int divisor);
 
@@ -39,6 +51,8 @@ extern unsigned int __div64_32(unsigned long long *dividend,
 	__rem;								\
  })
 
+#endif /* __powerpc64__ */
+
 static int skip_atoi(const char **s)
 {
 	int i, c;

arch/powerpc/boot/swab.h

@@ -0,0 +1,29 @@
+#ifndef _PPC_BOOT_SWAB_H_
+#define _PPC_BOOT_SWAB_H_
+
+static inline u16 swab16(u16 x)
+{
+	return  ((x & (u16)0x00ffU) << 8) |
+		((x & (u16)0xff00U) >> 8);
+}
+
+static inline u32 swab32(u32 x)
+{
+	return  ((x & (u32)0x000000ffUL) << 24) |
+		((x & (u32)0x0000ff00UL) <<  8) |
+		((x & (u32)0x00ff0000UL) >>  8) |
+		((x & (u32)0xff000000UL) >> 24);
+}
+
+static inline u64 swab64(u64 x)
+{
+	return  (u64)((x & (u64)0x00000000000000ffULL) << 56) |
+		(u64)((x & (u64)0x000000000000ff00ULL) << 40) |
+		(u64)((x & (u64)0x0000000000ff0000ULL) << 24) |
+		(u64)((x & (u64)0x00000000ff000000ULL) <<  8) |
+		(u64)((x & (u64)0x000000ff00000000ULL) >>  8) |
+		(u64)((x & (u64)0x0000ff0000000000ULL) >> 24) |
+		(u64)((x & (u64)0x00ff000000000000ULL) >> 40) |
+		(u64)((x & (u64)0xff00000000000000ULL) >> 56);
+}
+#endif /* _PPC_BOOT_SWAB_H_ */

arch/powerpc/boot/treeboot-akebono.c

@@ -0,0 +1,163 @@
+/*
+ * Copyright © 2013 Tony Breeds IBM Corporation
+ * Copyright © 2013 Alistair Popple IBM Corporation
+ *
+ * Based on earlier code:
+ *   Copyright (C) Paul Mackerras 1997.
+ *
+ *   Matt Porter <mporter@kernel.crashing.org>
+ *   Copyright 2002-2005 MontaVista Software Inc.
+ *
+ *   Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
+ *   Copyright (c) 2003, 2004 Zultys Technologies
+ *
+ *    Copyright 2007 David Gibson, IBM Corporation.
+ *    Copyright 2010 Ben. Herrenschmidt, IBM Corporation.
+ *    Copyright © 2011 David Kleikamp IBM Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#include <stdarg.h>
+#include <stddef.h>
+#include "types.h"
+#include "elf.h"
+#include "string.h"
+#include "stdlib.h"
+#include "stdio.h"
+#include "page.h"
+#include "ops.h"
+#include "reg.h"
+#include "io.h"
+#include "dcr.h"
+#include "4xx.h"
+#include "44x.h"
+#include "libfdt.h"
+
+BSS_STACK(4096);
+
+#define SPRN_PIR	0x11E	/* Processor Indentification Register */
+#define USERDATA_LEN	256	/* Length of userdata passed in by PIBS */
+#define MAX_RANKS	0x4
+#define DDR3_MR0CF	0x80010011U
+#define CCTL0_MCO2	0x8000080FU
+#define CCTL0_MCO3	0x80000810U
+#define CCTL0_MCO4	0x80000811U
+#define CCTL0_MCO5	0x80000812U
+#define CCTL0_MCO6	0x80000813U
+
+static unsigned long long ibm_akebono_memsize;
+static long long unsigned mac_addr;
+
+static unsigned long long ibm_akebono_detect_memsize(void)
+{
+	u32 reg;
+	unsigned i;
+	unsigned long long memsize = 0;
+
+	for (i = 0; i < MAX_RANKS; i++) {
+		reg = mfdcrx(DDR3_MR0CF + i);
+
+		if (!(reg & 1))
+			continue;
+
+		reg &= 0x0000f000;
+		reg >>= 12;
+		memsize += (0x800000ULL << reg);
+	}
+
+	return memsize;
+}
+
+static void ibm_akebono_fixups(void)
+{
+	void *emac;
+	u32 reg;
+
+	dt_fixup_memory(0x0ULL,  ibm_akebono_memsize);
+
+	/* Fixup the SD timeout frequency */
+	mtdcrx(CCTL0_MCO4, 0x1);
+
+	/* Disable SD high-speed mode (which seems to be broken) */
+	reg = mfdcrx(CCTL0_MCO2) & ~0x2;
+	mtdcrx(CCTL0_MCO2, reg);
+
+	/* Set the MAC address */
+	emac = finddevice("/plb/opb/ethernet");
+	if (emac > 0) {
+		if (mac_addr)
+			setprop(emac, "local-mac-address",
+				((u8 *) &mac_addr) + 2 , 6);
+	}
+}
+
+void platform_init(char *userdata)
+{
+	unsigned long end_of_ram, avail_ram;
+	u32 pir_reg;
+	int node, size;
+	const u32 *timebase;
+	int len, i, userdata_len;
+	char *end;
+
+	userdata[USERDATA_LEN - 1] = '\0';
+	userdata_len = strlen(userdata);
+	for (i = 0; i < userdata_len - 15; i++) {
+		if (strncmp(&userdata[i], "local-mac-addr=", 15) == 0) {
+			if (i > 0 && userdata[i - 1] != ' ') {
+				/* We've only found a substring ending
+				 * with local-mac-addr so this isn't
+				 * our mac address. */
+				continue;
+			}
+
+			mac_addr = strtoull(&userdata[i + 15], &end, 16);
+
+			/* Remove the "local-mac-addr=<...>" from the kernel
+			 * command line, including the tailing space if
+			 * present. */
+			if (*end == ' ')
+				end++;
+
+			len = ((int) end) - ((int) &userdata[i]);
+			memmove(&userdata[i], end,
+				userdata_len - (len + i) + 1);
+			break;
+		}
+	}
+
+	loader_info.cmdline = userdata;
+	loader_info.cmdline_len = 256;
+
+	ibm_akebono_memsize = ibm_akebono_detect_memsize();
+	if (ibm_akebono_memsize >> 32)
+		end_of_ram = ~0UL;
+	else
+		end_of_ram = ibm_akebono_memsize;
+	avail_ram = end_of_ram - (unsigned long)_end;
+
+	simple_alloc_init(_end, avail_ram, 128, 64);
+	platform_ops.fixups = ibm_akebono_fixups;
+	platform_ops.exit = ibm44x_dbcr_reset;
+	pir_reg = mfspr(SPRN_PIR);
+
+	/* Make sure FDT blob is sane */
+	if (fdt_check_header(_dtb_start) != 0)
+		fatal("Invalid device tree blob\n");
+
+	node = fdt_node_offset_by_prop_value(_dtb_start, -1, "device_type",
+					     "cpu", sizeof("cpu"));
+	if (!node)
+		fatal("Cannot find cpu node\n");
+	timebase = fdt_getprop(_dtb_start, node, "timebase-frequency", &size);
+	if (timebase && (size == 4))
+		timebase_period_ns = 1000000000 / *timebase;
+
+	fdt_set_boot_cpuid_phys(_dtb_start, pir_reg);
+	fdt_init(_dtb_start);
+
+	serial_console_init();
+}

arch/powerpc/boot/util.S

@@ -45,7 +45,7 @@ udelay:
 	mfspr	r4,SPRN_PVR
 	srwi	r4,r4,16
 	cmpwi	0,r4,1		/* 601 ? */
-	bne	.udelay_not_601
+	bne	.Ludelay_not_601
 00:	li	r0,86	/* Instructions / microsecond? */
 	mtctr	r0
 10:	addi	r0,r0,0 /* NOP */
@@ -54,7 +54,7 @@ udelay:
 	bne	00b
 	blr
 
-.udelay_not_601:
+.Ludelay_not_601:
 	mulli	r4,r3,1000	/* nanoseconds */
 	/*  Change r4 to be the number of ticks using:
 	 *	(nanoseconds + (timebase_period_ns - 1 )) / timebase_period_ns

arch/powerpc/boot/wrapper

@@ -40,6 +40,7 @@ cacheit=
 binary=
 gzip=.gz
 pie=
+format=
 
 # cross-compilation prefix
 CROSS=
@@ -136,6 +137,14 @@ if [ -z "$kernel" ]; then
     kernel=vmlinux
 fi
 
+elfformat="`${CROSS}objdump -p "$kernel" | grep 'file format' | awk '{print $4}'`"
+case "$elfformat" in
+    elf64-powerpcle)	format=elf64lppc	;;
+    elf64-powerpc)	format=elf32ppc	;;
+    elf32-powerpc)	format=elf32ppc	;;
+esac
+
+
 platformo=$object/"$platform".o
 lds=$object/zImage.lds
 ext=strip
@@ -152,8 +161,12 @@ of)
     make_space=n
     ;;
 pseries)
-    platformo="$object/of.o $object/epapr.o"
+    platformo="$object/pseries-head.o $object/of.o $object/epapr.o"
     link_address='0x4000000'
+    if [ "$format" != "elf32ppc" ]; then
+	link_address=
+	pie=-pie
+    fi
     make_space=n
     ;;
 maple)
@@ -257,6 +270,9 @@ gamecube|wii)
 treeboot-currituck)
     link_address='0x1000000'
     ;;
+treeboot-akebono)
+    link_address='0x1000000'
+    ;;
 treeboot-iss4xx-mpic)
     platformo="$object/treeboot-iss4xx.o"
     ;;
@@ -379,7 +395,7 @@ if [ "$platform" != "miboot" ]; then
     if [ -n "$link_address" ] ; then
         text_start="-Ttext $link_address"
     fi
-    ${CROSS}ld -m elf32ppc -T $lds $text_start $pie -o "$ofile" \
+    ${CROSS}ld -m $format -T $lds $text_start $pie -o "$ofile" \
 	$platformo $tmp $object/wrapper.a
     rm $tmp
 fi

arch/powerpc/boot/zImage.lds.S

@@ -1,4 +1,10 @@
+#include <asm-generic/vmlinux.lds.h>
+
+#ifdef CONFIG_PPC64_BOOT_WRAPPER
+OUTPUT_ARCH(powerpc:common64)
+#else
 OUTPUT_ARCH(powerpc:common)
+#endif
 ENTRY(_zimage_start)
 EXTERN(_zimage_start)
 SECTIONS
@@ -16,7 +22,9 @@ SECTIONS
     *(.rodata*)
     *(.data*)
     *(.sdata*)
+#ifndef CONFIG_PPC64_BOOT_WRAPPER
     *(.got2)
+#endif
   }
   .dynsym : { *(.dynsym) }
   .dynstr : { *(.dynstr) }
@@ -27,7 +35,13 @@ SECTIONS
   }
   .hash : { *(.hash) }
   .interp : { *(.interp) }
-  .rela.dyn : { *(.rela*) }
+  .rela.dyn :
+  {
+#ifdef CONFIG_PPC64_BOOT_WRAPPER
+    __rela_dyn_start = .;
+#endif
+    *(.rela*)
+  }
 
   . = ALIGN(8);
   .kernel:dtb :
@@ -53,6 +67,15 @@ SECTIONS
     _initrd_end =  .;
   }
 
+#ifdef CONFIG_PPC64_BOOT_WRAPPER
+  .got :
+  {
+    __toc_start = .;
+    *(.got)
+    *(.toc)
+  }
+#endif
+
   . = ALIGN(4096);
   .bss       :
   {

arch/powerpc/configs/44x/akebono_defconfig

@@ -0,0 +1,148 @@
+CONFIG_44x=y
+CONFIG_SMP=y
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_RD_XZ=y
+CONFIG_EXPERT=y
+CONFIG_KALLSYMS_ALL=y
+# CONFIG_SLUB_CPU_PARTIAL is not set
+CONFIG_PROFILING=y
+CONFIG_OPROFILE=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_POWERNV_MSI is not set
+CONFIG_PPC_47x=y
+# CONFIG_EBONY is not set
+CONFIG_AKEBONO=y
+CONFIG_HIGHMEM=y
+CONFIG_HZ_100=y
+CONFIG_IRQ_ALL_CPUS=y
+# CONFIG_COMPACTION is not set
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE=""
+# CONFIG_SUSPEND is not set
+CONFIG_PCI_MSI=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_IPV6 is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_CONNECTOR=y
+CONFIG_MTD=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_PHYSMAP_OF=y
+CONFIG_PROC_DEVICETREE=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_SIZE=35000
+# CONFIG_SCSI_PROC_FS is not set
+CONFIG_BLK_DEV_SD=y
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SATA_PMP is not set
+# CONFIG_ATA_SFF is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_NET_VENDOR_ADAPTEC is not set
+# CONFIG_NET_VENDOR_ALTEON is not set
+# CONFIG_NET_VENDOR_AMD is not set
+# CONFIG_NET_VENDOR_ARC is not set
+# CONFIG_NET_VENDOR_ATHEROS is not set
+# CONFIG_NET_CADENCE is not set
+# CONFIG_NET_VENDOR_BROADCOM is not set
+# CONFIG_NET_VENDOR_BROCADE is not set
+# CONFIG_NET_VENDOR_CHELSIO is not set
+# CONFIG_NET_VENDOR_CISCO is not set
+# CONFIG_NET_VENDOR_DEC is not set
+# CONFIG_NET_VENDOR_DLINK is not set
+# CONFIG_NET_VENDOR_EMULEX is not set
+# CONFIG_NET_VENDOR_EXAR is not set
+# CONFIG_NET_VENDOR_HP is not set
+CONFIG_IBM_EMAC=y
+# CONFIG_NET_VENDOR_MARVELL is not set
+# CONFIG_NET_VENDOR_MELLANOX is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_MYRI is not set
+# CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_NVIDIA is not set
+# CONFIG_NET_VENDOR_OKI is not set
+# CONFIG_NET_VENDOR_QLOGIC is not set
+# CONFIG_NET_VENDOR_REALTEK is not set
+# CONFIG_NET_VENDOR_RDC is not set
+# CONFIG_NET_VENDOR_SEEQ is not set
+# CONFIG_NET_VENDOR_SILAN is not set
+# CONFIG_NET_VENDOR_SIS is not set
+# CONFIG_NET_VENDOR_SMSC is not set
+# CONFIG_NET_VENDOR_STMICRO is not set
+# CONFIG_NET_VENDOR_SUN is not set
+# CONFIG_NET_VENDOR_TEHUTI is not set
+# CONFIG_NET_VENDOR_TI is not set
+# CONFIG_NET_VENDOR_VIA is not set
+# CONFIG_NET_VENDOR_WIZNET is not set
+# CONFIG_NET_VENDOR_XILINX is not set
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_MOUSE_PS2 is not set
+# CONFIG_SERIO is not set
+# CONFIG_VT is not set
+CONFIG_SERIAL_8250=y
+# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_OF_PLATFORM=y
+# CONFIG_HW_RANDOM is not set
+CONFIG_I2C_CHARDEV=y
+# CONFIG_HWMON is not set
+CONFIG_THERMAL=y
+# CONFIG_USB_DEFAULT_PERSIST is not set
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_HCD_PCI is not set
+CONFIG_USB_STORAGE=y
+CONFIG_MMC=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_M41T80=y
+CONFIG_EXT2_FS=y
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY_USER is not set
+CONFIG_VFAT_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_TMPFS=y
+CONFIG_CRAMFS=y
+# CONFIG_NETWORK_FILESYSTEMS is not set
+CONFIG_NLS_DEFAULT="n"
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_FS=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DETECT_HUNG_TASK=y
+CONFIG_XMON=y
+CONFIG_XMON_DEFAULT=y
+CONFIG_PPC_EARLY_DEBUG=y
+CONFIG_PPC_EARLY_DEBUG_44x_PHYSLOW=0x00010000
+CONFIG_PPC_EARLY_DEBUG_44x_PHYSHIGH=0x33f
+CONFIG_CRYPTO_PCBC=y
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_SHA1_PPC=y
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set

arch/powerpc/configs/85xx/kmp204x_defconfig

@@ -0,0 +1,225 @@
+CONFIG_PPC_85xx=y
+CONFIG_SMP=y
+CONFIG_NR_CPUS=8
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_AUDIT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_CGROUPS=y
+CONFIG_CGROUP_SCHED=y
+CONFIG_RELAY=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_KALLSYMS_ALL=y
+CONFIG_EMBEDDED=y
+CONFIG_PERF_EVENTS=y
+CONFIG_SLAB=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+# CONFIG_BLK_DEV_BSG is not set
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_MAC_PARTITION=y
+CONFIG_CORENET_GENERIC=y
+CONFIG_MPIC_MSGR=y
+CONFIG_HIGHMEM=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_BINFMT_MISC=m
+CONFIG_KEXEC=y
+CONFIG_FORCE_MAX_ZONEORDER=13
+CONFIG_PCI=y
+CONFIG_PCIEPORTBUS=y
+# CONFIG_PCIEASPM is not set
+CONFIG_PCI_MSI=y
+CONFIG_ADVANCED_OPTIONS=y
+CONFIG_LOWMEM_SIZE_BOOL=y
+CONFIG_LOWMEM_SIZE=0x20000000
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_XFRM_USER=y
+CONFIG_XFRM_SUB_POLICY=y
+CONFIG_XFRM_STATISTICS=y
+CONFIG_NET_KEY=y
+CONFIG_NET_KEY_MIGRATE=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+CONFIG_NET_IPIP=y
+CONFIG_IP_MROUTE=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+CONFIG_INET_AH=y
+CONFIG_INET_ESP=y
+CONFIG_INET_IPCOMP=y
+# CONFIG_INET_LRO is not set
+CONFIG_IPV6=y
+CONFIG_IP_SCTP=m
+CONFIG_TIPC=y
+CONFIG_NET_SCHED=y
+CONFIG_NET_SCH_CBQ=y
+CONFIG_NET_SCH_HTB=y
+CONFIG_NET_SCH_HFSC=y
+CONFIG_NET_SCH_PRIO=y
+CONFIG_NET_SCH_MULTIQ=y
+CONFIG_NET_SCH_RED=y
+CONFIG_NET_SCH_SFQ=y
+CONFIG_NET_SCH_TEQL=y
+CONFIG_NET_SCH_TBF=y
+CONFIG_NET_SCH_GRED=y
+CONFIG_NET_CLS_BASIC=y
+CONFIG_NET_CLS_TCINDEX=y
+CONFIG_NET_CLS_U32=y
+CONFIG_CLS_U32_PERF=y
+CONFIG_CLS_U32_MARK=y
+CONFIG_NET_CLS_FLOW=y
+CONFIG_NET_CLS_CGROUP=y
+CONFIG_UEVENT_HELPER_PATH="/sbin/mdev"
+CONFIG_DEVTMPFS=y
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_PHYSMAP_OF=y
+CONFIG_MTD_M25P80=y
+CONFIG_MTD_PHRAM=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_ECC_BCH=y
+CONFIG_MTD_NAND_FSL_ELBC=y
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_GLUEBI=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=2
+CONFIG_BLK_DEV_RAM_SIZE=2048
+CONFIG_EEPROM_AT24=y
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=y
+CONFIG_BLK_DEV_SR=y
+CONFIG_CHR_DEV_SG=y
+CONFIG_SCSI_MULTI_LUN=y
+CONFIG_SCSI_LOGGING=y
+CONFIG_SCSI_SYM53C8XX_2=y
+CONFIG_NETDEVICES=y
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_NET_VENDOR_ADAPTEC is not set
+# CONFIG_NET_VENDOR_ALTEON is not set
+# CONFIG_NET_VENDOR_AMD is not set
+# CONFIG_NET_VENDOR_ATHEROS is not set
+# CONFIG_NET_CADENCE is not set
+# CONFIG_NET_VENDOR_BROADCOM is not set
+# CONFIG_NET_VENDOR_BROCADE is not set
+# CONFIG_NET_VENDOR_CHELSIO is not set
+# CONFIG_NET_VENDOR_CISCO is not set
+# CONFIG_NET_VENDOR_DEC is not set
+# CONFIG_NET_VENDOR_DLINK is not set
+# CONFIG_NET_VENDOR_EMULEX is not set
+# CONFIG_NET_VENDOR_EXAR is not set
+CONFIG_FSL_PQ_MDIO=y
+CONFIG_FSL_XGMAC_MDIO=y
+# CONFIG_NET_VENDOR_HP is not set
+# CONFIG_NET_VENDOR_INTEL is not set
+# CONFIG_NET_VENDOR_MARVELL is not set
+# CONFIG_NET_VENDOR_MELLANOX is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_MICROCHIP is not set
+# CONFIG_NET_VENDOR_MYRI is not set
+# CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_NVIDIA is not set
+# CONFIG_NET_VENDOR_OKI is not set
+# CONFIG_NET_PACKET_ENGINE is not set
+# CONFIG_NET_VENDOR_QLOGIC is not set
+# CONFIG_NET_VENDOR_REALTEK is not set
+# CONFIG_NET_VENDOR_RDC is not set
+# CONFIG_NET_VENDOR_SEEQ is not set
+# CONFIG_NET_VENDOR_SILAN is not set
+# CONFIG_NET_VENDOR_SIS is not set
+# CONFIG_NET_VENDOR_SMSC is not set
+# CONFIG_NET_VENDOR_STMICRO is not set
+# CONFIG_NET_VENDOR_SUN is not set
+# CONFIG_NET_VENDOR_TEHUTI is not set
+# CONFIG_NET_VENDOR_TI is not set
+# CONFIG_NET_VENDOR_VIA is not set
+# CONFIG_NET_VENDOR_WIZNET is not set
+# CONFIG_NET_VENDOR_XILINX is not set
+CONFIG_MARVELL_PHY=y
+CONFIG_VITESSE_PHY=y
+CONFIG_FIXED_PHY=y
+# CONFIG_WLAN is not set
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_LEGACY_PTYS is not set
+CONFIG_PPC_EPAPR_HV_BYTECHAN=y
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_DETECT_IRQ=y
+CONFIG_SERIAL_8250_RSA=y
+CONFIG_NVRAM=y
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_MUX=y
+CONFIG_I2C_MUX_PCA954x=y
+CONFIG_I2C_MPC=y
+CONFIG_SPI=y
+CONFIG_SPI_FSL_SPI=y
+CONFIG_SPI_FSL_ESPI=y
+CONFIG_SPI_SPIDEV=m
+CONFIG_PTP_1588_CLOCK=y
+# CONFIG_HWMON is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_EDAC=y
+CONFIG_EDAC_MM_EDAC=y
+CONFIG_EDAC_MPC85XX=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_DS3232=y
+CONFIG_RTC_DRV_CMOS=y
+CONFIG_UIO=y
+CONFIG_STAGING=y
+# CONFIG_NET_VENDOR_SILICOM is not set
+CONFIG_CLK_PPC_CORENET=y
+CONFIG_EXT2_FS=y
+CONFIG_NTFS_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_TMPFS=y
+CONFIG_JFFS2_FS=y
+CONFIG_UBIFS_FS=y
+CONFIG_CRAMFS=y
+CONFIG_SQUASHFS=y
+CONFIG_SQUASHFS_XZ=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_UTF8=m
+CONFIG_CRC_ITU_T=m
+CONFIG_DEBUG_INFO=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_SHIRQ=y
+CONFIG_DETECT_HUNG_TASK=y
+CONFIG_SCHEDSTATS=y
+CONFIG_RCU_TRACE=y
+CONFIG_UPROBE_EVENT=y
+CONFIG_CRYPTO_NULL=y
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_MD4=y
+CONFIG_CRYPTO_SHA256=y
+CONFIG_CRYPTO_SHA512=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_DEV_FSL_CAAM=y

arch/powerpc/configs/corenet32_smp_defconfig

@@ -72,6 +72,7 @@ CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_CFI=y
+CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_CFI_AMDSTD=y
 CONFIG_MTD_PHYSMAP_OF=y
 CONFIG_MTD_M25P80=y

arch/powerpc/configs/mpc85xx_defconfig

@@ -32,7 +32,6 @@ CONFIG_P1010_RDB=y
 CONFIG_P1022_DS=y
 CONFIG_P1022_RDK=y
 CONFIG_P1023_RDB=y
-CONFIG_P1023_RDS=y
 CONFIG_SOCRATES=y
 CONFIG_KSI8560=y
 CONFIG_XES_MPC85xx=y

arch/powerpc/configs/mpc85xx_smp_defconfig

@@ -35,7 +35,6 @@ CONFIG_P1010_RDB=y
 CONFIG_P1022_DS=y
 CONFIG_P1022_RDK=y
 CONFIG_P1023_RDB=y
-CONFIG_P1023_RDS=y
 CONFIG_SOCRATES=y
 CONFIG_KSI8560=y
 CONFIG_XES_MPC85xx=y

arch/powerpc/include/asm/code-patching.h

@@ -42,15 +42,47 @@ void __patch_exception(int exc, unsigned long addr);
 } while (0)
 #endif
 
+#define OP_RT_RA_MASK	0xffff0000UL
+#define LIS_R2		0x3c020000UL
+#define ADDIS_R2_R12	0x3c4c0000UL
+#define ADDI_R2_R2	0x38420000UL
+
 static inline unsigned long ppc_function_entry(void *func)
 {
-#ifdef CONFIG_PPC64
+#if defined(CONFIG_PPC64)
+#if defined(_CALL_ELF) && _CALL_ELF == 2
+	u32 *insn = func;
+
+	/*
+	 * A PPC64 ABIv2 function may have a local and a global entry
+	 * point. We need to use the local entry point when patching
+	 * functions, so identify and step over the global entry point
+	 * sequence.
+	 *
+	 * The global entry point sequence is always of the form:
+	 *
+	 * addis r2,r12,XXXX
+	 * addi  r2,r2,XXXX
+	 *
+	 * A linker optimisation may convert the addis to lis:
+	 *
+	 * lis   r2,XXXX
+	 * addi  r2,r2,XXXX
+	 */
+	if ((((*insn & OP_RT_RA_MASK) == ADDIS_R2_R12) ||
+	     ((*insn & OP_RT_RA_MASK) == LIS_R2)) &&
+	    ((*(insn+1) & OP_RT_RA_MASK) == ADDI_R2_R2))
+		return (unsigned long)(insn + 2);
+	else
+		return (unsigned long)func;
+#else
 	/*
-	 * On PPC64 the function pointer actually points to the function's
-	 * descriptor. The first entry in the descriptor is the address
-	 * of the function text.
+	 * On PPC64 ABIv1 the function pointer actually points to the
+	 * function's descriptor. The first entry in the descriptor is the
+	 * address of the function text.
 	 */
 	return ((func_descr_t *)func)->entry;
+#endif
 #else
 	return (unsigned long)func;
 #endif

arch/powerpc/include/asm/context_tracking.h

@@ -2,9 +2,9 @@
 #define _ASM_POWERPC_CONTEXT_TRACKING_H
 
 #ifdef CONFIG_CONTEXT_TRACKING
-#define SCHEDULE_USER bl	.schedule_user
+#define SCHEDULE_USER bl	schedule_user
 #else
-#define SCHEDULE_USER bl	.schedule
+#define SCHEDULE_USER bl	schedule
 #endif
 
 #endif

arch/powerpc/include/asm/cputhreads.h

@@ -18,10 +18,12 @@
 
 #ifdef CONFIG_SMP
 extern int threads_per_core;
+extern int threads_per_subcore;
 extern int threads_shift;
 extern cpumask_t threads_core_mask;
 #else
 #define threads_per_core	1
+#define threads_per_subcore	1
 #define threads_shift		0
 #define threads_core_mask	(CPU_MASK_CPU0)
 #endif
@@ -74,6 +76,11 @@ static inline int cpu_thread_in_core(int cpu)
 	return cpu & (threads_per_core - 1);
 }
 
+static inline int cpu_thread_in_subcore(int cpu)
+{
+	return cpu & (threads_per_subcore - 1);
+}
+
 static inline int cpu_first_thread_sibling(int cpu)
 {
 	return cpu & ~(threads_per_core - 1);

arch/powerpc/include/asm/debug.h

@@ -46,7 +46,8 @@ static inline int debugger_break_match(struct pt_regs *regs) { return 0; }
 static inline int debugger_fault_handler(struct pt_regs *regs) { return 0; }
 #endif
 
-int set_breakpoint(struct arch_hw_breakpoint *brk);
+void set_breakpoint(struct arch_hw_breakpoint *brk);
+void __set_breakpoint(struct arch_hw_breakpoint *brk);
 #ifdef CONFIG_PPC_ADV_DEBUG_REGS
 extern void do_send_trap(struct pt_regs *regs, unsigned long address,
 			 unsigned long error_code, int signal_code, int brkpt);

arch/powerpc/include/asm/eeh.h

@@ -32,6 +32,22 @@ struct device_node;
 
 #ifdef CONFIG_EEH
 
+/* EEH subsystem flags */
+#define EEH_ENABLED		0x1	/* EEH enabled		*/
+#define EEH_FORCE_DISABLED	0x2	/* EEH disabled		*/
+#define EEH_PROBE_MODE_DEV	0x4	/* From PCI device	*/
+#define EEH_PROBE_MODE_DEVTREE	0x8	/* From device tree	*/
+
+/*
+ * Delay for PE reset, all in ms
+ *
+ * PCI specification has reset hold time of 100 milliseconds.
+ * We have 250 milliseconds here. The PCI bus settlement time
+ * is specified as 1.5 seconds and we have 1.8 seconds.
+ */
+#define EEH_PE_RST_HOLD_TIME		250
+#define EEH_PE_RST_SETTLE_TIME		1800
+
 /*
  * The struct is used to trace PE related EEH functionality.
  * In theory, there will have one instance of the struct to
@@ -53,7 +69,7 @@ struct device_node;
 
 #define EEH_PE_ISOLATED		(1 << 0)	/* Isolated PE		*/
 #define EEH_PE_RECOVERING	(1 << 1)	/* Recovering PE	*/
-#define EEH_PE_PHB_DEAD		(1 << 2)	/* Dead PHB		*/
+#define EEH_PE_RESET		(1 << 2)	/* PE reset in progress	*/
 
 #define EEH_PE_KEEP		(1 << 8)	/* Keep PE on hotplug	*/
 
@@ -92,6 +108,7 @@ struct eeh_pe {
 
 #define EEH_DEV_NO_HANDLER	(1 << 8)	/* No error handler	*/
 #define EEH_DEV_SYSFS		(1 << 9)	/* Sysfs created	*/
+#define EEH_DEV_REMOVED		(1 << 10)	/* Removed permanently	*/
 
 struct eeh_dev {
 	int mode;			/* EEH mode			*/
@@ -99,7 +116,9 @@ struct eeh_dev {
 	int config_addr;		/* Config address		*/
 	int pe_config_addr;		/* PE config address		*/
 	u32 config_space[16];		/* Saved PCI config space	*/
-	u8 pcie_cap;			/* Saved PCIe capability	*/
+	int pcix_cap;			/* Saved PCIx capability	*/
+	int pcie_cap;			/* Saved PCIe capability	*/
+	int aer_cap;			/* Saved AER capability		*/
 	struct eeh_pe *pe;		/* Associated PE		*/
 	struct list_head list;		/* Form link list in the PE	*/
 	struct pci_controller *phb;	/* Associated PHB		*/
@@ -171,37 +190,40 @@ struct eeh_ops {
 	int (*restore_config)(struct device_node *dn);
 };
 
+extern int eeh_subsystem_flags;
 extern struct eeh_ops *eeh_ops;
-extern bool eeh_subsystem_enabled;
 extern raw_spinlock_t confirm_error_lock;
-extern int eeh_probe_mode;
 
 static inline bool eeh_enabled(void)
 {
-	return eeh_subsystem_enabled;
+	if ((eeh_subsystem_flags & EEH_FORCE_DISABLED) ||
+	    !(eeh_subsystem_flags & EEH_ENABLED))
+		return false;
+
+	return true;
 }
 
 static inline void eeh_set_enable(bool mode)
 {
-	eeh_subsystem_enabled = mode;
+	if (mode)
+		eeh_subsystem_flags |= EEH_ENABLED;
+	else
+		eeh_subsystem_flags &= ~EEH_ENABLED;
 }
 
-#define EEH_PROBE_MODE_DEV	(1<<0)	/* From PCI device	*/
-#define EEH_PROBE_MODE_DEVTREE	(1<<1)	/* From device tree	*/
-
 static inline void eeh_probe_mode_set(int flag)
 {
-	eeh_probe_mode = flag;
+	eeh_subsystem_flags |= flag;
 }
 
 static inline int eeh_probe_mode_devtree(void)
 {
-	return (eeh_probe_mode == EEH_PROBE_MODE_DEVTREE);
+	return (eeh_subsystem_flags & EEH_PROBE_MODE_DEVTREE);
 }
 
 static inline int eeh_probe_mode_dev(void)
 {
-	return (eeh_probe_mode == EEH_PROBE_MODE_DEV);
+	return (eeh_subsystem_flags & EEH_PROBE_MODE_DEV);
 }
 
 static inline void eeh_serialize_lock(unsigned long *flags)

arch/powerpc/include/asm/elf.h

@@ -90,6 +90,8 @@ typedef elf_vrregset_t elf_fpxregset_t;
 do {								\
 	if (((ex).e_flags & 0x3) == 2)				\
 		set_thread_flag(TIF_ELF2ABI);			\
+	else							\
+		clear_thread_flag(TIF_ELF2ABI);			\
 	if ((ex).e_ident[EI_CLASS] == ELFCLASS32)		\
 		set_thread_flag(TIF_32BIT);			\
 	else							\

arch/powerpc/include/asm/exception-64e.h

@@ -174,10 +174,10 @@ exc_##label##_book3e:
 	mtlr	r16;
 #define TLB_MISS_STATS_D(name)						    \
 	addi	r9,r13,MMSTAT_DSTATS+name;				    \
-	bl	.tlb_stat_inc;
+	bl	tlb_stat_inc;
 #define TLB_MISS_STATS_I(name)						    \
 	addi	r9,r13,MMSTAT_ISTATS+name;				    \
-	bl	.tlb_stat_inc;
+	bl	tlb_stat_inc;
 #define TLB_MISS_STATS_X(name)						    \
 	ld	r8,PACA_EXTLB+EX_TLB_ESR(r13);				    \
 	cmpdi	cr2,r8,-1;						    \
@@ -185,7 +185,7 @@ exc_##label##_book3e:
 	addi	r9,r13,MMSTAT_DSTATS+name;				    \
 	b	62f;							    \
 61:	addi	r9,r13,MMSTAT_ISTATS+name;				    \
-62:	bl	.tlb_stat_inc;
+62:	bl	tlb_stat_inc;
 #define TLB_MISS_STATS_SAVE_INFO					    \
 	std	r14,EX_TLB_ESR(r12);	/* save ESR */
 #define TLB_MISS_STATS_SAVE_INFO_BOLTED					    \

arch/powerpc/include/asm/exception-64s.h

@@ -517,7 +517,7 @@ label##_relon_hv:							\
 #define DISABLE_INTS	RECONCILE_IRQ_STATE(r10,r11)
 
 #define ADD_NVGPRS				\
-	bl	.save_nvgprs
+	bl	save_nvgprs
 
 #define RUNLATCH_ON				\
 BEGIN_FTR_SECTION				\

arch/powerpc/include/asm/ftrace.h

@@ -61,6 +61,7 @@ struct dyn_arch_ftrace {
 #endif
 
 #if defined(CONFIG_FTRACE_SYSCALLS) && defined(CONFIG_PPC64) && !defined(__ASSEMBLY__)
+#if !defined(_CALL_ELF) || _CALL_ELF != 2
 #define ARCH_HAS_SYSCALL_MATCH_SYM_NAME
 static inline bool arch_syscall_match_sym_name(const char *sym, const char *name)
 {
@@ -72,6 +73,7 @@ static inline bool arch_syscall_match_sym_name(const char *sym, const char *name
 	 */
 	return !strcmp(sym + 4, name + 3);
 }
+#endif
 #endif /* CONFIG_FTRACE_SYSCALLS && CONFIG_PPC64 && !__ASSEMBLY__ */
 
 #endif /* _ASM_POWERPC_FTRACE */

arch/powerpc/include/asm/hw_breakpoint.h

@@ -79,7 +79,7 @@ static inline void hw_breakpoint_disable(void)
 	brk.address = 0;
 	brk.type = 0;
 	brk.len = 0;
-	set_breakpoint(&brk);
+	__set_breakpoint(&brk);
 }
 extern void thread_change_pc(struct task_struct *tsk, struct pt_regs *regs);
 

arch/powerpc/include/asm/irqflags.h

@@ -20,9 +20,9 @@
  */
 #define TRACE_WITH_FRAME_BUFFER(func)		\
 	mflr	r0;				\
-	stdu	r1, -32(r1);			\
+	stdu	r1, -STACK_FRAME_OVERHEAD(r1);	\
 	std	r0, 16(r1);			\
-	stdu	r1, -32(r1);			\
+	stdu	r1, -STACK_FRAME_OVERHEAD(r1);	\
 	bl func;				\
 	ld	r1, 0(r1);			\
 	ld	r1, 0(r1);
@@ -36,8 +36,8 @@
  * have to call a C function so call a wrapper that saves all the
  * C-clobbered registers.
  */
-#define TRACE_ENABLE_INTS	TRACE_WITH_FRAME_BUFFER(.trace_hardirqs_on)
-#define TRACE_DISABLE_INTS	TRACE_WITH_FRAME_BUFFER(.trace_hardirqs_off)
+#define TRACE_ENABLE_INTS	TRACE_WITH_FRAME_BUFFER(trace_hardirqs_on)
+#define TRACE_DISABLE_INTS	TRACE_WITH_FRAME_BUFFER(trace_hardirqs_off)
 
 /*
  * This is used by assembly code to soft-disable interrupts first and

arch/powerpc/include/asm/kprobes.h

@@ -30,6 +30,7 @@
 #include <linux/ptrace.h>
 #include <linux/percpu.h>
 #include <asm/probes.h>
+#include <asm/code-patching.h>
 
 #define  __ARCH_WANT_KPROBES_INSN_SLOT
 
@@ -56,9 +57,9 @@ typedef ppc_opcode_t kprobe_opcode_t;
 		if ((colon = strchr(name, ':')) != NULL) {		\
 			colon++;					\
 			if (*colon != '\0' && *colon != '.')		\
-				addr = *(kprobe_opcode_t **)addr;	\
+				addr = (kprobe_opcode_t *)ppc_function_entry(addr); \
 		} else if (name[0] != '.')				\
-			addr = *(kprobe_opcode_t **)addr;		\
+			addr = (kprobe_opcode_t *)ppc_function_entry(addr); \
 	} else {							\
 		char dot_name[KSYM_NAME_LEN];				\
 		dot_name[0] = '.';					\

arch/powerpc/include/asm/kvm_ppc.h

@@ -337,6 +337,10 @@ static inline void kvmppc_fast_vcpu_kick(struct kvm_vcpu *vcpu)
 	vcpu->kvm->arch.kvm_ops->fast_vcpu_kick(vcpu);
 }
 
+extern void kvm_hv_vm_activated(void);
+extern void kvm_hv_vm_deactivated(void);
+extern bool kvm_hv_mode_active(void);
+
 #else
 static inline void __init kvm_cma_reserve(void)
 {}
@@ -356,6 +360,9 @@ static inline void kvmppc_fast_vcpu_kick(struct kvm_vcpu *vcpu)
 {
 	kvm_vcpu_kick(vcpu);
 }
+
+static inline bool kvm_hv_mode_active(void)		{ return false; }
+
 #endif
 
 #ifdef CONFIG_KVM_XICS

arch/powerpc/include/asm/linkage.h

@@ -2,6 +2,7 @@
 #define _ASM_POWERPC_LINKAGE_H
 
 #ifdef CONFIG_PPC64
+#if !defined(_CALL_ELF) || _CALL_ELF != 2
 #define cond_syscall(x) \
 	asm ("\t.weak " #x "\n\t.set " #x ", sys_ni_syscall\n"		\
 	     "\t.weak ." #x "\n\t.set ." #x ", .sys_ni_syscall\n")
@@ -9,5 +10,6 @@
 	asm ("\t.globl " #alias "\n\t.set " #alias ", " #name "\n"	\
 	     "\t.globl ." #alias "\n\t.set ." #alias ", ." #name)
 #endif
+#endif
 
 #endif	/* _ASM_POWERPC_LINKAGE_H */

arch/powerpc/include/asm/machdep.h

@@ -98,6 +98,9 @@ struct machdep_calls {
 	void		(*iommu_save)(void);
 	void		(*iommu_restore)(void);
 #endif
+#ifdef CONFIG_MEMORY_HOTPLUG_SPARSE
+	unsigned long	(*memory_block_size)(void);
+#endif
 #endif /* CONFIG_PPC64 */
 
 	void		(*pci_dma_dev_setup)(struct pci_dev *dev);
@@ -113,6 +116,8 @@ struct machdep_calls {
 	/* Optional, may be NULL. */
 	void		(*show_cpuinfo)(struct seq_file *m);
 	void		(*show_percpuinfo)(struct seq_file *m, int i);
+	/* Returns the current operating frequency of "cpu" in Hz */
+	unsigned long  	(*get_proc_freq)(unsigned int cpu);
 
 	void		(*init_IRQ)(void);
 
@@ -241,6 +246,9 @@ struct machdep_calls {
 	/* Called during PCI resource reassignment */
 	resource_size_t (*pcibios_window_alignment)(struct pci_bus *, unsigned long type);
 
+	/* Reset the secondary bus of bridge */
+	void  (*pcibios_reset_secondary_bus)(struct pci_dev *dev);
+
 	/* Called to shutdown machine specific hardware not already controlled
 	 * by other drivers.
 	 */

arch/powerpc/include/asm/module.h

@@ -35,6 +35,7 @@ struct mod_arch_specific {
 #ifdef __powerpc64__
 	unsigned int stubs_section;	/* Index of stubs section in module */
 	unsigned int toc_section;	/* What section is the TOC? */
+	bool toc_fixed;			/* Have we fixed up .TOC.? */
 #ifdef CONFIG_DYNAMIC_FTRACE
 	unsigned long toc;
 	unsigned long tramp;
@@ -77,6 +78,9 @@ struct mod_arch_specific {
 #    endif	/* MODULE */
 #endif
 
+bool is_module_trampoline(u32 *insns);
+int module_trampoline_target(struct module *mod, u32 *trampoline,
+			     unsigned long *target);
 
 struct exception_table_entry;
 void sort_ex_table(struct exception_table_entry *start,

arch/powerpc/include/asm/opal.h

@@ -154,6 +154,7 @@ extern int opal_enter_rtas(struct rtas_args *args,
 #define OPAL_LPC_READ				67
 #define OPAL_LPC_WRITE				68
 #define OPAL_RETURN_CPU				69
+#define OPAL_REINIT_CPUS			70
 #define OPAL_ELOG_READ				71
 #define OPAL_ELOG_WRITE				72
 #define OPAL_ELOG_ACK				73
@@ -509,7 +510,7 @@ enum OpalMemErr_DynErrType {
 struct OpalMemoryErrorData {
 	enum OpalMemErr_Version	version:8;	/* 0x00 */
 	enum OpalMemErrType	type:8;		/* 0x01 */
-	uint16_t		flags;		/* 0x02 */
+	__be16			flags;		/* 0x02 */
 	uint8_t			reserved_1[4];	/* 0x04 */
 
 	union {
@@ -517,15 +518,15 @@ struct OpalMemoryErrorData {
 		struct {
 			enum OpalMemErr_ResilErrType resil_err_type:8;
 			uint8_t		reserved_1[7];
-			uint64_t	physical_address_start;
-			uint64_t	physical_address_end;
+			__be64		physical_address_start;
+			__be64		physical_address_end;
 		} resilience;
 		/* Dynamic memory deallocation error info */
 		struct {
 			enum OpalMemErr_DynErrType dyn_err_type:8;
 			uint8_t		reserved_1[7];
-			uint64_t	physical_address_start;
-			uint64_t	physical_address_end;
+			__be64		physical_address_start;
+			__be64		physical_address_end;
 		} dyn_dealloc;
 	} u;
 };
@@ -725,6 +726,11 @@ struct OpalIoPhb3ErrorData {
 	uint64_t pestB[OPAL_PHB3_NUM_PEST_REGS];
 };
 
+enum {
+	OPAL_REINIT_CPUS_HILE_BE	= (1 << 0),
+	OPAL_REINIT_CPUS_HILE_LE	= (1 << 1),
+};
+
 typedef struct oppanel_line {
 	const char * 	line;
 	uint64_t 	line_len;
@@ -849,6 +855,7 @@ int64_t opal_pci_next_error(uint64_t phb_id, uint64_t *first_frozen_pe,
 			    uint16_t *pci_error_type, uint16_t *severity);
 int64_t opal_pci_poll(uint64_t phb_id);
 int64_t opal_return_cpu(void);
+int64_t opal_reinit_cpus(uint64_t flags);
 
 int64_t opal_xscom_read(uint32_t gcid, uint64_t pcb_addr, __be64 *val);
 int64_t opal_xscom_write(uint32_t gcid, uint64_t pcb_addr, uint64_t val);
@@ -916,6 +923,7 @@ extern void opal_get_rtc_time(struct rtc_time *tm);
 extern unsigned long opal_get_boot_time(void);
 extern void opal_nvram_init(void);
 extern void opal_flash_init(void);
+extern void opal_flash_term_callback(void);
 extern int opal_elog_init(void);
 extern void opal_platform_dump_init(void);
 extern void opal_sys_param_init(void);

arch/powerpc/include/asm/paca.h

@@ -92,7 +92,10 @@ struct paca_struct {
 	struct slb_shadow *slb_shadow_ptr;
 	struct dtl_entry *dispatch_log;
 	struct dtl_entry *dispatch_log_end;
+#endif /* CONFIG_PPC_STD_MMU_64 */
+	u64 dscr_default;		/* per-CPU default DSCR */
 
+#ifdef CONFIG_PPC_STD_MMU_64
 	/*
 	 * Now, starting in cacheline 2, the exception save areas
 	 */

arch/powerpc/include/asm/ppc-pci.h

@@ -58,6 +58,7 @@ int rtas_write_config(struct pci_dn *, int where, int size, u32 val);
 int rtas_read_config(struct pci_dn *, int where, int size, u32 *val);
 void eeh_pe_state_mark(struct eeh_pe *pe, int state);
 void eeh_pe_state_clear(struct eeh_pe *pe, int state);
+void eeh_pe_dev_mode_mark(struct eeh_pe *pe, int mode);
 
 void eeh_sysfs_add_device(struct pci_dev *pdev);
 void eeh_sysfs_remove_device(struct pci_dev *pdev);

arch/powerpc/include/asm/ppc_asm.h

@@ -57,7 +57,7 @@ BEGIN_FW_FTR_SECTION;							\
 	LDX_BE	r10,0,r10;		/* get log write index */	\
 	cmpd	cr1,r11,r10;						\
 	beq+	cr1,33f;						\
-	bl	.accumulate_stolen_time;				\
+	bl	accumulate_stolen_time;				\
 	ld	r12,_MSR(r1);						\
 	andi.	r10,r12,MSR_PR;		/* Restore cr0 (coming from user) */ \
 33:									\
@@ -189,57 +189,53 @@ END_FW_FTR_SECTION_IFSET(FW_FEATURE_SPLPAR)
 #define __STK_REG(i)   (112 + ((i)-14)*8)
 #define STK_REG(i)     __STK_REG(__REG_##i)
 
+#if defined(_CALL_ELF) && _CALL_ELF == 2
+#define STK_GOT		24
+#define __STK_PARAM(i)	(32 + ((i)-3)*8)
+#else
+#define STK_GOT		40
 #define __STK_PARAM(i)	(48 + ((i)-3)*8)
+#endif
 #define STK_PARAM(i)	__STK_PARAM(__REG_##i)
 
-#define XGLUE(a,b) a##b
-#define GLUE(a,b) XGLUE(a,b)
+#if defined(_CALL_ELF) && _CALL_ELF == 2
 
 #define _GLOBAL(name) \
 	.section ".text"; \
 	.align 2 ; \
+	.type name,@function; \
 	.globl name; \
-	.globl GLUE(.,name); \
-	.section ".opd","aw"; \
-name: \
-	.quad GLUE(.,name); \
-	.quad .TOC.@tocbase; \
-	.quad 0; \
-	.previous; \
-	.type GLUE(.,name),@function; \
-GLUE(.,name):
+name:
 
-#define _INIT_GLOBAL(name) \
-	__REF; \
+#define _GLOBAL_TOC(name) \
+	.section ".text"; \
 	.align 2 ; \
+	.type name,@function; \
 	.globl name; \
-	.globl GLUE(.,name); \
-	.section ".opd","aw"; \
 name: \
-	.quad GLUE(.,name); \
-	.quad .TOC.@tocbase; \
-	.quad 0; \
-	.previous; \
-	.type GLUE(.,name),@function; \
-GLUE(.,name):
+0:	addis r2,r12,(.TOC.-0b)@ha; \
+	addi r2,r2,(.TOC.-0b)@l; \
+	.localentry name,.-name
 
 #define _KPROBE(name) \
 	.section ".kprobes.text","a"; \
 	.align 2 ; \
+	.type name,@function; \
 	.globl name; \
-	.globl GLUE(.,name); \
-	.section ".opd","aw"; \
-name: \
-	.quad GLUE(.,name); \
-	.quad .TOC.@tocbase; \
-	.quad 0; \
-	.previous; \
-	.type GLUE(.,name),@function; \
-GLUE(.,name):
+name:
+
+#define DOTSYM(a)	a
+
+#else
+
+#define XGLUE(a,b) a##b
+#define GLUE(a,b) XGLUE(a,b)
 
-#define _STATIC(name) \
+#define _GLOBAL(name) \
 	.section ".text"; \
 	.align 2 ; \
+	.globl name; \
+	.globl GLUE(.,name); \
 	.section ".opd","aw"; \
 name: \
 	.quad GLUE(.,name); \
@@ -249,9 +245,13 @@ name: \
 	.type GLUE(.,name),@function; \
 GLUE(.,name):
 
-#define _INIT_STATIC(name) \
-	__REF; \
+#define _GLOBAL_TOC(name) _GLOBAL(name)
+
+#define _KPROBE(name) \
+	.section ".kprobes.text","a"; \
 	.align 2 ; \
+	.globl name; \
+	.globl GLUE(.,name); \
 	.section ".opd","aw"; \
 name: \
 	.quad GLUE(.,name); \
@@ -261,6 +261,10 @@ name: \
 	.type GLUE(.,name),@function; \
 GLUE(.,name):
 
+#define DOTSYM(a)	GLUE(.,a)
+
+#endif
+
 #else /* 32-bit */
 
 #define _ENTRY(n)	\

arch/powerpc/include/asm/processor.h

@@ -449,7 +449,7 @@ extern unsigned long cpuidle_disable;
 enum idle_boot_override {IDLE_NO_OVERRIDE = 0, IDLE_POWERSAVE_OFF};
 
 extern int powersave_nap;	/* set if nap mode can be used in idle loop */
-extern void power7_nap(void);
+extern void power7_nap(int check_irq);
 extern void power7_sleep(void);
 extern void flush_instruction_cache(void);
 extern void hard_reset_now(void);

arch/powerpc/include/asm/reg.h

@@ -215,6 +215,7 @@
 #define SPRN_TEXASR	0x82	/* Transaction EXception & Summary */
 #define   TEXASR_FS	__MASK(63-36)	/* Transaction Failure Summary */
 #define SPRN_TEXASRU	0x83	/* ''	   ''	   ''	 Upper 32  */
+#define   TEXASR_FS     __MASK(63-36) /* TEXASR Failure Summary */
 #define SPRN_TFHAR	0x80	/* Transaction Failure Handler Addr */
 #define SPRN_CTRLF	0x088
 #define SPRN_CTRLT	0x098
@@ -224,6 +225,7 @@
 #define   CTRL_TE	0x00c00000	/* thread enable */
 #define   CTRL_RUNLATCH	0x1
 #define SPRN_DAWR	0xB4
+#define SPRN_RPR	0xBA	/* Relative Priority Register */
 #define SPRN_CIABR	0xBB
 #define   CIABR_PRIV		0x3
 #define   CIABR_PRIV_USER	1
@@ -272,8 +274,10 @@
 #define SPRN_HSRR1	0x13B	/* Hypervisor Save/Restore 1 */
 #define SPRN_IC		0x350	/* Virtual Instruction Count */
 #define SPRN_VTB	0x351	/* Virtual Time Base */
+#define SPRN_LDBAR	0x352	/* LD Base Address Register */
 #define SPRN_PMICR	0x354   /* Power Management Idle Control Reg */
 #define SPRN_PMSR	0x355   /* Power Management Status Reg */
+#define SPRN_PMMAR	0x356	/* Power Management Memory Activity Register */
 #define SPRN_PMCR	0x374	/* Power Management Control Register */
 
 /* HFSCR and FSCR bit numbers are the same */
@@ -433,6 +437,12 @@
 #define HID0_BTCD	(1<<1)		/* Branch target cache disable */
 #define HID0_NOPDST	(1<<1)		/* No-op dst, dstt, etc. instr. */
 #define HID0_NOPTI	(1<<0)		/* No-op dcbt and dcbst instr. */
+/* POWER8 HID0 bits */
+#define HID0_POWER8_4LPARMODE	__MASK(61)
+#define HID0_POWER8_2LPARMODE	__MASK(57)
+#define HID0_POWER8_1TO2LPAR	__MASK(52)
+#define HID0_POWER8_1TO4LPAR	__MASK(51)
+#define HID0_POWER8_DYNLPARDIS	__MASK(48)
 
 #define SPRN_HID1	0x3F1		/* Hardware Implementation Register 1 */
 #ifdef CONFIG_6xx

arch/powerpc/include/asm/sections.h

@@ -50,6 +50,7 @@ static inline int overlaps_kvm_tmp(unsigned long start, unsigned long end)
 #endif
 }
 
+#if !defined(_CALL_ELF) || _CALL_ELF != 2
 #undef dereference_function_descriptor
 static inline void *dereference_function_descriptor(void *ptr)
 {
@@ -60,6 +61,7 @@ static inline void *dereference_function_descriptor(void *ptr)
 		ptr = p;
 	return ptr;
 }
+#endif
 
 #endif
 

arch/powerpc/include/asm/smp.h

@@ -68,14 +68,6 @@ void generic_mach_cpu_die(void);
 void generic_set_cpu_dead(unsigned int cpu);
 void generic_set_cpu_up(unsigned int cpu);
 int generic_check_cpu_restart(unsigned int cpu);
-
-extern void inhibit_secondary_onlining(void);
-extern void uninhibit_secondary_onlining(void);
-
-#else /* HOTPLUG_CPU */
-static inline void inhibit_secondary_onlining(void) {}
-static inline void uninhibit_secondary_onlining(void) {}
-
 #endif
 
 #ifdef CONFIG_PPC64

arch/powerpc/include/asm/string.h

@@ -10,9 +10,7 @@
 #define __HAVE_ARCH_STRNCMP
 #define __HAVE_ARCH_STRCAT
 #define __HAVE_ARCH_MEMSET
-#ifdef __BIG_ENDIAN__
 #define __HAVE_ARCH_MEMCPY
-#endif
 #define __HAVE_ARCH_MEMMOVE
 #define __HAVE_ARCH_MEMCMP
 #define __HAVE_ARCH_MEMCHR
@@ -24,9 +22,7 @@ extern int strcmp(const char *,const char *);
 extern int strncmp(const char *, const char *, __kernel_size_t);
 extern char * strcat(char *, const char *);
 extern void * memset(void *,int,__kernel_size_t);
-#ifdef __BIG_ENDIAN__
 extern void * memcpy(void *,const void *,__kernel_size_t);
-#endif
 extern void * memmove(void *,const void *,__kernel_size_t);
 extern int memcmp(const void *,const void *,__kernel_size_t);
 extern void * memchr(const void *,int,__kernel_size_t);

arch/powerpc/include/asm/systbl.h

@@ -62,7 +62,7 @@ COMPAT_SYS_SPU(fcntl)
 SYSCALL(ni_syscall)
 SYSCALL_SPU(setpgid)
 SYSCALL(ni_syscall)
-SYSX(sys_ni_syscall,sys_olduname, sys_olduname)
+SYSX(sys_ni_syscall,sys_olduname,sys_olduname)
 SYSCALL_SPU(umask)
 SYSCALL_SPU(chroot)
 COMPAT_SYS(ustat)
@@ -190,7 +190,7 @@ SYSCALL_SPU(getcwd)
 SYSCALL_SPU(capget)
 SYSCALL_SPU(capset)
 COMPAT_SYS(sigaltstack)
-COMPAT_SYS_SPU(sendfile)
+SYSX_SPU(sys_sendfile64,compat_sys_sendfile,sys_sendfile)
 SYSCALL(ni_syscall)
 SYSCALL(ni_syscall)
 PPC_SYS(vfork)
@@ -258,7 +258,7 @@ SYSCALL_SPU(tgkill)
 COMPAT_SYS_SPU(utimes)
 COMPAT_SYS_SPU(statfs64)
 COMPAT_SYS_SPU(fstatfs64)
-SYSX(sys_ni_syscall, ppc_fadvise64_64, ppc_fadvise64_64)
+SYSX(sys_ni_syscall,ppc_fadvise64_64,ppc_fadvise64_64)
 PPC_SYS_SPU(rtas)
 OLDSYS(debug_setcontext)
 SYSCALL(ni_syscall)
@@ -295,7 +295,7 @@ SYSCALL_SPU(mkdirat)
 SYSCALL_SPU(mknodat)
 SYSCALL_SPU(fchownat)
 COMPAT_SYS_SPU(futimesat)
-SYSX_SPU(sys_newfstatat, sys_fstatat64, sys_fstatat64)
+SYSX_SPU(sys_newfstatat,sys_fstatat64,sys_fstatat64)
 SYSCALL_SPU(unlinkat)
 SYSCALL_SPU(renameat)
 SYSCALL_SPU(linkat)

arch/powerpc/include/asm/topology.h

@@ -16,19 +16,6 @@ struct device_node;
 
 #include <asm/mmzone.h>
 
-static inline int cpu_to_node(int cpu)
-{
-	int nid;
-
-	nid = numa_cpu_lookup_table[cpu];
-
-	/*
-	 * During early boot, the numa-cpu lookup table might not have been
-	 * setup for all CPUs yet. In such cases, default to node 0.
-	 */
-	return (nid < 0) ? 0 : nid;
-}
-
 #define parent_node(node)	(node)
 
 #define cpumask_of_node(node) ((node) == -1 ?				\

arch/powerpc/include/uapi/asm/Kbuild

@@ -15,7 +15,6 @@ header-y += ioctls.h
 header-y += ipcbuf.h
 header-y += kvm.h
 header-y += kvm_para.h
-header-y += linkage.h
 header-y += mman.h
 header-y += msgbuf.h
 header-y += nvram.h

arch/powerpc/include/uapi/asm/elf.h

@@ -291,9 +291,17 @@ do {									\
 #define R_PPC64_DTPREL16_HIGHERA 104 /* half16	(sym+add)@dtprel@highera */
 #define R_PPC64_DTPREL16_HIGHEST 105 /* half16	(sym+add)@dtprel@highest */
 #define R_PPC64_DTPREL16_HIGHESTA 106 /* half16	(sym+add)@dtprel@highesta */
+#define R_PPC64_TLSGD		107
+#define R_PPC64_TLSLD		108
+#define R_PPC64_TOCSAVE		109
+
+#define R_PPC64_REL16		249
+#define R_PPC64_REL16_LO	250
+#define R_PPC64_REL16_HI	251
+#define R_PPC64_REL16_HA	252
 
 /* Keep this the last entry.  */
-#define R_PPC64_NUM		107
+#define R_PPC64_NUM		253
 
 /* There's actually a third entry here, but it's unused */
 struct ppc64_opd_entry

arch/powerpc/kernel/asm-offsets.c

@@ -248,6 +248,7 @@ int main(void)
 #endif
 	DEFINE(PACAHWCPUID, offsetof(struct paca_struct, hw_cpu_id));
 	DEFINE(PACAKEXECSTATE, offsetof(struct paca_struct, kexec_state));
+	DEFINE(PACA_DSCR, offsetof(struct paca_struct, dscr_default));
 	DEFINE(PACA_STARTTIME, offsetof(struct paca_struct, starttime));
 	DEFINE(PACA_STARTTIME_USER, offsetof(struct paca_struct, starttime_user));
 	DEFINE(PACA_USER_TIME, offsetof(struct paca_struct, user_time));

arch/powerpc/kernel/cpu_setup_fsl_booke.S

@@ -94,12 +94,12 @@ _GLOBAL(setup_altivec_idle)
 _GLOBAL(__setup_cpu_e6500)
 	mflr	r6
 #ifdef CONFIG_PPC64
-	bl	.setup_altivec_ivors
+	bl	setup_altivec_ivors
 	/* Touch IVOR42 only if the CPU supports E.HV category */
 	mfspr	r10,SPRN_MMUCFG
 	rlwinm.	r10,r10,0,MMUCFG_LPIDSIZE
 	beq	1f
-	bl	.setup_lrat_ivor
+	bl	setup_lrat_ivor
 1:
 #endif
 	bl	setup_pw20_idle
@@ -164,15 +164,15 @@ _GLOBAL(__setup_cpu_e5500)
 #ifdef CONFIG_PPC_BOOK3E_64
 _GLOBAL(__restore_cpu_e6500)
 	mflr	r5
-	bl	.setup_altivec_ivors
+	bl	setup_altivec_ivors
 	/* Touch IVOR42 only if the CPU supports E.HV category */
 	mfspr	r10,SPRN_MMUCFG
 	rlwinm.	r10,r10,0,MMUCFG_LPIDSIZE
 	beq	1f
-	bl	.setup_lrat_ivor
+	bl	setup_lrat_ivor
 1:
-	bl	.setup_pw20_idle
-	bl	.setup_altivec_idle
+	bl	setup_pw20_idle
+	bl	setup_altivec_idle
 	bl	__restore_cpu_e5500
 	mtlr	r5
 	blr
@@ -181,9 +181,9 @@ _GLOBAL(__restore_cpu_e5500)
 	mflr	r4
 	bl	__e500_icache_setup
 	bl	__e500_dcache_setup
-	bl	.__setup_base_ivors
-	bl	.setup_perfmon_ivor
-	bl	.setup_doorbell_ivors
+	bl	__setup_base_ivors
+	bl	setup_perfmon_ivor
+	bl	setup_doorbell_ivors
 	/*
 	 * We only want to touch IVOR38-41 if we're running on hardware
 	 * that supports category E.HV.  The architectural way to determine
@@ -192,7 +192,7 @@ _GLOBAL(__restore_cpu_e5500)
 	mfspr	r10,SPRN_MMUCFG
 	rlwinm.	r10,r10,0,MMUCFG_LPIDSIZE
 	beq	1f
-	bl	.setup_ehv_ivors
+	bl	setup_ehv_ivors
 1:
 	mtlr	r4
 	blr
@@ -201,9 +201,9 @@ _GLOBAL(__setup_cpu_e5500)
 	mflr	r5
 	bl	__e500_icache_setup
 	bl	__e500_dcache_setup
-	bl	.__setup_base_ivors
-	bl	.setup_perfmon_ivor
-	bl	.setup_doorbell_ivors
+	bl	__setup_base_ivors
+	bl	setup_perfmon_ivor
+	bl	setup_doorbell_ivors
 	/*
 	 * We only want to touch IVOR38-41 if we're running on hardware
 	 * that supports category E.HV.  The architectural way to determine
@@ -212,7 +212,7 @@ _GLOBAL(__setup_cpu_e5500)
 	mfspr	r10,SPRN_MMUCFG
 	rlwinm.	r10,r10,0,MMUCFG_LPIDSIZE
 	beq	1f
-	bl	.setup_ehv_ivors
+	bl	setup_ehv_ivors
 	b	2f
 1:
 	ld	r10,CPU_SPEC_FEATURES(r4)