staging: unisys: visorinput: combine ultrainputreport.h with visorinput.c

The file ultrainputreport.h was just being used by visorinput.c. Move the
definitions into visorinput.c and get rid of the file.

Signed-off-by: David Kershner <david.kershner@unisys.com>
Reviewed-by: Tim Sell <timothy.sell@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/staging/unisys/visorinput/ultrainputreport.h

@@ -1,55 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (C) 2010 - 2015 UNISYS CORPORATION
- * All rights reserved.
- */
-
-#ifndef __SPAR_ULTRAINPUTREPORT_H__
-#define __SPAR_ULTRAINPUTREPORT_H__
-
-#include <linux/types.h>
-
-/* These defines identify mouse and keyboard activity which is specified by the
- * firmware to the host using the cmsimpleinput protocol.  @ingroup coretypes
- */
-/* only motion; arg1=x, arg2=y */
-#define INPUTACTION_XY_MOTION 1
-
-/* arg1: 1=left,2=center,3=right */
-#define INPUTACTION_MOUSE_BUTTON_DOWN 2
-#define INPUTACTION_MOUSE_BUTTON_UP 3
-#define INPUTACTION_MOUSE_BUTTON_CLICK 4
-#define INPUTACTION_MOUSE_BUTTON_DCLICK 5
-
-/* arg1: wheel rotation away from/toward user */
-#define INPUTACTION_WHEEL_ROTATE_AWAY 6
-#define INPUTACTION_WHEEL_ROTATE_TOWARD 7
-
-/* arg1: scancode, as follows: If arg1 <= 0xff, it's a 1-byte scancode and arg1
- *	 is that scancode. If arg1 > 0xff, it's a 2-byte scanecode, with the 1st
- *	 byte in the low 8 bits, and the 2nd byte in the high 8 bits.
- *	 E.g., the right ALT key would appear as x'38e0'.
- */
-#define INPUTACTION_KEY_DOWN 64
-#define INPUTACTION_KEY_UP 65
-#define INPUTACTION_KEY_DOWN_UP 67
-
-/* arg1: scancode (in same format as inputaction_keyDown); MUST refer to one of
- *	 the locking keys, like capslock, numlock, or scrolllock.
- * arg2: 1 iff locking key should be in the LOCKED position (e.g., light is ON)
- */
-#define INPUTACTION_SET_LOCKING_KEY_STATE 66
-
-struct visor_inputactivity {
-	u16 action;
-	u16 arg1;
-	u16 arg2;
-	u16 arg3;
-} __packed;
-
-struct visor_inputreport {
-	u64 seq_no;
-	struct visor_inputactivity activity;
-} __packed;
-
-#endif

drivers/staging/unisys/visorinput/visorinput.c

@@ -18,7 +18,36 @@
 #include <linux/uuid.h>
 #include <linux/visorbus.h>
 
-#include "ultrainputreport.h"
+/* These defines identify mouse and keyboard activity which is specified by the
+ * firmware to the host using the cmsimpleinput protocol.  @ingroup coretypes
+ */
+/* only motion; arg1=x, arg2=y */
+#define INPUTACTION_XY_MOTION 1
+
+/* arg1: 1=left,2=center,3=right */
+#define INPUTACTION_MOUSE_BUTTON_DOWN 2
+#define INPUTACTION_MOUSE_BUTTON_UP 3
+#define INPUTACTION_MOUSE_BUTTON_CLICK 4
+#define INPUTACTION_MOUSE_BUTTON_DCLICK 5
+
+/* arg1: wheel rotation away from/toward user */
+#define INPUTACTION_WHEEL_ROTATE_AWAY 6
+#define INPUTACTION_WHEEL_ROTATE_TOWARD 7
+
+/* arg1: scancode, as follows: If arg1 <= 0xff, it's a 1-byte scancode and arg1
+ *	 is that scancode. If arg1 > 0xff, it's a 2-byte scanecode, with the 1st
+ *	 byte in the low 8 bits, and the 2nd byte in the high 8 bits.
+ *	 E.g., the right ALT key would appear as x'38e0'.
+ */
+#define INPUTACTION_KEY_DOWN 64
+#define INPUTACTION_KEY_UP 65
+#define INPUTACTION_KEY_DOWN_UP 67
+
+/* arg1: scancode (in same format as inputaction_keyDown); MUST refer to one of
+ *	 the locking keys, like capslock, numlock, or scrolllock.
+ * arg2: 1 iff locking key should be in the LOCKED position (e.g., light is ON)
+ */
+#define INPUTACTION_SET_LOCKING_KEY_STATE 66
 
 /* Keyboard channel {c73416d0-b0b8-44af-b304-9d2ae99f1b3d} */
 #define VISOR_KEYBOARD_CHANNEL_GUID \
@@ -36,6 +65,18 @@
 #define PIXELS_DOWN_DEFAULT   768
 #define KEYCODE_TABLE_BYTES   256
 
+struct visor_inputactivity {
+	u16 action;
+	u16 arg1;
+	u16 arg2;
+	u16 arg3;
+} __packed;
+
+struct visor_inputreport {
+	u64 seq_no;
+	struct visor_inputactivity activity;
+} __packed;
+
 /* header of keyboard/mouse channels */
 struct visor_input_channel_data {
 	u32 n_input_reports;