|
@@ -0,0 +1,49 @@
|
|
|
+Ilitek ILI9322 TFT panel driver with SPI control bus
|
|
|
+
|
|
|
+This is a driver for 320x240 TFT panels, accepting a variety of input
|
|
|
+streams that get adapted and scaled to the panel. The panel output has
|
|
|
+960 TFT source driver pins and 240 TFT gate driver pins, VCOM, VCOML and
|
|
|
+VCOMH outputs.
|
|
|
+
|
|
|
+Required properties:
|
|
|
+ - compatible: "dlink,dir-685-panel", "ilitek,ili9322"
|
|
|
+ (full system-specific compatible is always required to look up configuration)
|
|
|
+ - reg: address of the panel on the SPI bus
|
|
|
+
|
|
|
+Optional properties:
|
|
|
+ - vcc-supply: core voltage supply, see regulator/regulator.txt
|
|
|
+ - iovcc-supply: voltage supply for the interface input/output signals,
|
|
|
+ see regulator/regulator.txt
|
|
|
+ - vci-supply: voltage supply for analog parts, see regulator/regulator.txt
|
|
|
+ - reset-gpios: a GPIO spec for the reset pin, see gpio/gpio.txt
|
|
|
+
|
|
|
+ The following optional properties only apply to RGB and YUV input modes and
|
|
|
+ can be omitted for BT.656 input modes:
|
|
|
+
|
|
|
+ - pixelclk-active: see display/panel/display-timing.txt
|
|
|
+ - de-active: see display/panel/display-timing.txt
|
|
|
+ - hsync-active: see display/panel/display-timing.txt
|
|
|
+ - vsync-active: see display/panel/display-timing.txt
|
|
|
+
|
|
|
+The panel must obey the rules for a SPI slave device as specified in
|
|
|
+spi/spi-bus.txt
|
|
|
+
|
|
|
+The device node can contain one 'port' child node with one child
|
|
|
+'endpoint' node, according to the bindings defined in
|
|
|
+media/video-interfaces.txt. This node should describe panel's video bus.
|
|
|
+
|
|
|
+Example:
|
|
|
+
|
|
|
+panel: display@0 {
|
|
|
+ compatible = "dlink,dir-685-panel", "ilitek,ili9322";
|
|
|
+ reg = <0>;
|
|
|
+ vcc-supply = <&vdisp>;
|
|
|
+ iovcc-supply = <&vdisp>;
|
|
|
+ vci-supply = <&vdisp>;
|
|
|
+
|
|
|
+ port {
|
|
|
+ panel_in: endpoint {
|
|
|
+ remote-endpoint = <&display_out>;
|
|
|
+ };
|
|
|
+ };
|
|
|
+};
|