Merge branch 'next/fixes-non-critical' into next/cleanup

Merging in the few fixes we had also received, no need to keep those in
a separate branch.

* next/fixes-non-critical:
  drivers: CCI: Correct use of ! and &
  MAINTAINERS: Add sdhci-st file to ARCH/STI architecture
  ARM: EXYNOS: Fix build breakge with PM_SLEEP=n
  ARM: omap2+: gpmc-nand: Use dynamic platform_device_alloc()
  omap16xx: Removes fixme no longer needed in ocpi_enable()
  ARM: dts: OMAP5: Add device nodes for ABB
  ARM: omap2+: usb-tusb6010.c: Cleaning up variable is set more than once

Signed-off-by: Olof Johansson <olof@lixom.net>

MAINTAINERS

@@ -1356,6 +1356,7 @@ F:	drivers/pinctrl/pinctrl-st.c
 F:	drivers/media/rc/st_rc.c
 F:	drivers/i2c/busses/i2c-st.c
 F:	drivers/tty/serial/st-asc.c
+F:	drivers/mmc/host/sdhci-st.c
 
 ARM/TECHNOLOGIC SYSTEMS TS7250 MACHINE SUPPORT
 M:	Lennert Buytenhek <kernel@wantstofly.org>

arch/arm/boot/dts/omap5.dtsi

@@ -985,6 +985,66 @@
 				dma-names = "audio_tx";
 			};
 		};
+
+		abb_mpu: regulator-abb-mpu {
+			compatible = "ti,abb-v2";
+			regulator-name = "abb_mpu";
+			#address-cells = <0>;
+			#size-cells = <0>;
+			clocks = <&sys_clkin>;
+			ti,settling-time = <50>;
+			ti,clock-cycles = <16>;
+
+			reg = <0x4ae07cdc 0x8>, <0x4ae06014 0x4>,
+			      <0x4a0021c4 0x8>, <0x4ae0c318 0x4>;
+			reg-names = "base-address", "int-address",
+				    "efuse-address", "ldo-address";
+			ti,tranxdone-status-mask = <0x80>;
+			/* LDOVBBMPU_MUX_CTRL */
+			ti,ldovbb-override-mask = <0x400>;
+			/* LDOVBBMPU_VSET_OUT */
+			ti,ldovbb-vset-mask = <0x1F>;
+
+			/*
+			 * NOTE: only FBB mode used but actual vset will
+			 * determine final biasing
+			 */
+			ti,abb_info = <
+			/*uV		ABB	efuse	rbb_m fbb_m	vset_m*/
+			1060000		0	0x0	0 0x02000000 0x01F00000
+			1250000		0	0x4	0 0x02000000 0x01F00000
+			>;
+		};
+
+		abb_mm: regulator-abb-mm {
+			compatible = "ti,abb-v2";
+			regulator-name = "abb_mm";
+			#address-cells = <0>;
+			#size-cells = <0>;
+			clocks = <&sys_clkin>;
+			ti,settling-time = <50>;
+			ti,clock-cycles = <16>;
+
+			reg = <0x4ae07ce4 0x8>, <0x4ae06010 0x4>,
+			      <0x4a0021a4 0x8>, <0x4ae0c314 0x4>;
+			reg-names = "base-address", "int-address",
+				    "efuse-address", "ldo-address";
+			ti,tranxdone-status-mask = <0x80000000>;
+			/* LDOVBBMM_MUX_CTRL */
+			ti,ldovbb-override-mask = <0x400>;
+			/* LDOVBBMM_VSET_OUT */
+			ti,ldovbb-vset-mask = <0x1F>;
+
+			/*
+			 * NOTE: only FBB mode used but actual vset will
+			 * determine final biasing
+			 */
+			ti,abb_info = <
+			/*uV		ABB	efuse	rbb_m fbb_m	vset_m*/
+			1025000		0	0x0	0 0x02000000 0x01F00000
+			1120000		0	0x4	0 0x02000000 0x01F00000
+			>;
+		};
 	};
 };
 

arch/arm/mach-exynos/platsmp.c

@@ -31,6 +31,72 @@
 
 extern void exynos4_secondary_startup(void);
 
+/**
+ * exynos_core_power_down : power down the specified cpu
+ * @cpu : the cpu to power down
+ *
+ * Power down the specified cpu. The sequence must be finished by a
+ * call to cpu_do_idle()
+ *
+ */
+void exynos_cpu_power_down(int cpu)
+{
+	__raw_writel(0, EXYNOS_ARM_CORE_CONFIGURATION(cpu));
+}
+
+/**
+ * exynos_cpu_power_up : power up the specified cpu
+ * @cpu : the cpu to power up
+ *
+ * Power up the specified cpu
+ */
+void exynos_cpu_power_up(int cpu)
+{
+	__raw_writel(S5P_CORE_LOCAL_PWR_EN,
+		     EXYNOS_ARM_CORE_CONFIGURATION(cpu));
+}
+
+/**
+ * exynos_cpu_power_state : returns the power state of the cpu
+ * @cpu : the cpu to retrieve the power state from
+ *
+ */
+int exynos_cpu_power_state(int cpu)
+{
+	return (__raw_readl(EXYNOS_ARM_CORE_STATUS(cpu)) &
+			S5P_CORE_LOCAL_PWR_EN);
+}
+
+/**
+ * exynos_cluster_power_down : power down the specified cluster
+ * @cluster : the cluster to power down
+ */
+void exynos_cluster_power_down(int cluster)
+{
+	__raw_writel(0, EXYNOS_COMMON_CONFIGURATION(cluster));
+}
+
+/**
+ * exynos_cluster_power_up : power up the specified cluster
+ * @cluster : the cluster to power up
+ */
+void exynos_cluster_power_up(int cluster)
+{
+	__raw_writel(S5P_CORE_LOCAL_PWR_EN,
+		     EXYNOS_COMMON_CONFIGURATION(cluster));
+}
+
+/**
+ * exynos_cluster_power_state : returns the power state of the cluster
+ * @cluster : the cluster to retrieve the power state from
+ *
+ */
+int exynos_cluster_power_state(int cluster)
+{
+	return (__raw_readl(EXYNOS_COMMON_STATUS(cluster)) &
+			S5P_CORE_LOCAL_PWR_EN);
+}
+
 static inline void __iomem *cpu_boot_reg_base(void)
 {
 	if (soc_is_exynos4210() && samsung_rev() == EXYNOS4210_REV_1_1)

arch/arm/mach-exynos/pm.c

@@ -101,72 +101,6 @@ static int exynos_irq_set_wake(struct irq_data *data, unsigned int state)
 	return -ENOENT;
 }
 
-/**
- * exynos_core_power_down : power down the specified cpu
- * @cpu : the cpu to power down
- *
- * Power down the specified cpu. The sequence must be finished by a
- * call to cpu_do_idle()
- *
- */
-void exynos_cpu_power_down(int cpu)
-{
-	__raw_writel(0, EXYNOS_ARM_CORE_CONFIGURATION(cpu));
-}
-
-/**
- * exynos_cpu_power_up : power up the specified cpu
- * @cpu : the cpu to power up
- *
- * Power up the specified cpu
- */
-void exynos_cpu_power_up(int cpu)
-{
-	__raw_writel(S5P_CORE_LOCAL_PWR_EN,
-		     EXYNOS_ARM_CORE_CONFIGURATION(cpu));
-}
-
-/**
- * exynos_cpu_power_state : returns the power state of the cpu
- * @cpu : the cpu to retrieve the power state from
- *
- */
-int exynos_cpu_power_state(int cpu)
-{
-	return (__raw_readl(EXYNOS_ARM_CORE_STATUS(cpu)) &
-			S5P_CORE_LOCAL_PWR_EN);
-}
-
-/**
- * exynos_cluster_power_down : power down the specified cluster
- * @cluster : the cluster to power down
- */
-void exynos_cluster_power_down(int cluster)
-{
-	__raw_writel(0, EXYNOS_COMMON_CONFIGURATION(cluster));
-}
-
-/**
- * exynos_cluster_power_up : power up the specified cluster
- * @cluster : the cluster to power up
- */
-void exynos_cluster_power_up(int cluster)
-{
-	__raw_writel(S5P_CORE_LOCAL_PWR_EN,
-		     EXYNOS_COMMON_CONFIGURATION(cluster));
-}
-
-/**
- * exynos_cluster_power_state : returns the power state of the cluster
- * @cluster : the cluster to retrieve the power state from
- *
- */
-int exynos_cluster_power_state(int cluster)
-{
-	return (__raw_readl(EXYNOS_COMMON_STATUS(cluster)) &
-			S5P_CORE_LOCAL_PWR_EN);
-}
-
 #define EXYNOS_BOOT_VECTOR_ADDR	(samsung_rev() == EXYNOS4210_REV_1_1 ? \
 			S5P_INFORM7 : (samsung_rev() == EXYNOS4210_REV_1_0 ? \
 			(sysram_base_addr + 0x24) : S5P_INFORM0))

arch/arm/mach-omap1/ocpi.c

@@ -55,7 +55,6 @@ static struct clk *ocpi_ck;
 
 /*
  * Enables device access to OMAP buses via the OCPI bridge
- * FIXME: Add locking
  */
 int ocpi_enable(void)
 {

arch/arm/mach-omap2/gpmc-nand.c

@@ -24,25 +24,6 @@
 /* minimum size for IO mapping */
 #define	NAND_IO_SIZE	4
 
-static struct resource gpmc_nand_resource[] = {
-	{
-		.flags		= IORESOURCE_MEM,
-	},
-	{
-		.flags		= IORESOURCE_IRQ,
-	},
-	{
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device gpmc_nand_device = {
-	.name		= "omap2-nand",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(gpmc_nand_resource),
-	.resource	= gpmc_nand_resource,
-};
-
 static bool gpmc_hwecc_bch_capable(enum omap_ecc ecc_opt)
 {
 	/* platforms which support all ECC schemes */
@@ -93,43 +74,41 @@ int gpmc_nand_init(struct omap_nand_platform_data *gpmc_nand_data,
 {
 	int err	= 0;
 	struct gpmc_settings s;
-	struct device *dev = &gpmc_nand_device.dev;
-
-	memset(&s, 0, sizeof(struct gpmc_settings));
+	struct platform_device *pdev;
+	struct resource gpmc_nand_res[] = {
+		{ .flags = IORESOURCE_MEM, },
+		{ .flags = IORESOURCE_IRQ, },
+		{ .flags = IORESOURCE_IRQ, },
+	};
 
-	gpmc_nand_device.dev.platform_data = gpmc_nand_data;
+	BUG_ON(gpmc_nand_data->cs >= GPMC_CS_NUM);
 
 	err = gpmc_cs_request(gpmc_nand_data->cs, NAND_IO_SIZE,
-				(unsigned long *)&gpmc_nand_resource[0].start);
+			      (unsigned long *)&gpmc_nand_res[0].start);
 	if (err < 0) {
-		dev_err(dev, "Cannot request GPMC CS %d, error %d\n",
-			gpmc_nand_data->cs, err);
+		pr_err("omap2-gpmc: Cannot request GPMC CS %d, error %d\n",
+		       gpmc_nand_data->cs, err);
 		return err;
 	}
-
-	gpmc_nand_resource[0].end = gpmc_nand_resource[0].start +
-							NAND_IO_SIZE - 1;
-
-	gpmc_nand_resource[1].start =
-				gpmc_get_client_irq(GPMC_IRQ_FIFOEVENTENABLE);
-	gpmc_nand_resource[2].start =
-				gpmc_get_client_irq(GPMC_IRQ_COUNT_EVENT);
+	gpmc_nand_res[0].end = gpmc_nand_res[0].start + NAND_IO_SIZE - 1;
+	gpmc_nand_res[1].start = gpmc_get_client_irq(GPMC_IRQ_FIFOEVENTENABLE);
+	gpmc_nand_res[2].start = gpmc_get_client_irq(GPMC_IRQ_COUNT_EVENT);
 
 	if (gpmc_t) {
 		err = gpmc_cs_set_timings(gpmc_nand_data->cs, gpmc_t);
 		if (err < 0) {
-			dev_err(dev, "Unable to set gpmc timings: %d\n", err);
+			pr_err("omap2-gpmc: Unable to set gpmc timings: %d\n", err);
 			return err;
 		}
 	}
 
+	memset(&s, 0, sizeof(struct gpmc_settings));
 	if (gpmc_nand_data->of_node)
 		gpmc_read_settings_dt(gpmc_nand_data->of_node, &s);
 	else
 		gpmc_set_legacy(gpmc_nand_data, &s);
 
 	s.device_nand = true;
-
 	err = gpmc_cs_program_settings(gpmc_nand_data->cs, &s);
 	if (err < 0)
 		goto out_free_cs;
@@ -141,18 +120,34 @@ int gpmc_nand_init(struct omap_nand_platform_data *gpmc_nand_data,
 	gpmc_update_nand_reg(&gpmc_nand_data->reg, gpmc_nand_data->cs);
 
 	if (!gpmc_hwecc_bch_capable(gpmc_nand_data->ecc_opt)) {
-		dev_err(dev, "Unsupported NAND ECC scheme selected\n");
-		return -EINVAL;
+		pr_err("omap2-nand: Unsupported NAND ECC scheme selected\n");
+		err = -EINVAL;
+		goto out_free_cs;
 	}
 
-	err = platform_device_register(&gpmc_nand_device);
-	if (err < 0) {
-		dev_err(dev, "Unable to register NAND device\n");
-		goto out_free_cs;
+
+	pdev = platform_device_alloc("omap2-nand", gpmc_nand_data->cs);
+	if (pdev) {
+		err = platform_device_add_resources(pdev, gpmc_nand_res,
+						    ARRAY_SIZE(gpmc_nand_res));
+		if (!err)
+			pdev->dev.platform_data = gpmc_nand_data;
+	} else {
+		err = -ENOMEM;
+	}
+	if (err)
+		goto out_free_pdev;
+
+	err = platform_device_add(pdev);
+	if (err) {
+		dev_err(&pdev->dev, "Unable to register NAND device\n");
+		goto out_free_pdev;
 	}
 
 	return 0;
 
+out_free_pdev:
+	platform_device_put(pdev);
 out_free_cs:
 	gpmc_cs_free(gpmc_nand_data->cs);
 

arch/arm/mach-omap2/usb-tusb6010.c

@@ -95,7 +95,6 @@ static int tusb_set_sync_mode(unsigned sysclk_ps)
 	dev_t.t_avdp_w = t_scsnh_advnh;
 	dev_t.cyc_aavdh_we = 3;
 	dev_t.cyc_wpl = 6;
-	dev_t.t_ce_rdyz = 7000;
 
 	gpmc_calc_timings(&t, &tusb_sync, &dev_t);
 

drivers/bus/arm-cci.c

@@ -397,7 +397,8 @@ static irqreturn_t pmu_handle_irq(int irq_num, void *dev)
 		hw_counter = &event->hw;
 
 		/* Did this counter overflow? */
-		if (!pmu_read_register(idx, CCI_PMU_OVRFLW) & CCI_PMU_OVRFLW_FLAG)
+		if (!(pmu_read_register(idx, CCI_PMU_OVRFLW) &
+		      CCI_PMU_OVRFLW_FLAG))
 			continue;
 
 		pmu_write_register(CCI_PMU_OVRFLW_FLAG, idx, CCI_PMU_OVRFLW);