MIPS: smp-mt,smp-cmp: Enable all HW IRQs on secondary CPUs

Commit 18743d2781d0 ("irqchip: mips-gic: Stop using per-platform mapping
tables") in v3.19-rc1 changed the routing of IPIs through the GIC to go
to the HW0 IRQ pin along with the rest of the GIC interrupts, rather
than to HW1 and HW2 pins.

This breaks SMP boot using the CMP or MT SMP implementations because HW0
doesn't get unmasked when secondary CPUs are initialised so the IPIs
will never interrupt secondary CPUs (nor any other interrupts routed
through the GIC).

Commit ff1e29ade4c6 ("MIPS: smp-cps: Enable all hardware interrupts on
secondary CPUs") fixed this in advance for the CPS SMP implementation by
unmasking all hardware interrupt lines for secondary CPUs, so lets do
the same for the CMP and MT implementations.

Fixes: 18743d2781d0 ("irqchip: mips-gic: Stop using per-platform mapping tables")
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Andrew Bresticker <abrestic@chromium.org>
Cc: Qais Yousef <qais.yousef@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/9025/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

arch/mips/kernel/smp-cmp.c

@@ -44,8 +44,8 @@ static void cmp_init_secondary(void)
 	struct cpuinfo_mips *c __maybe_unused = &current_cpu_data;
 
 	/* Assume GIC is present */
-	change_c0_status(ST0_IM, STATUSF_IP3 | STATUSF_IP4 | STATUSF_IP6 |
-				 STATUSF_IP7);
+	change_c0_status(ST0_IM, STATUSF_IP2 | STATUSF_IP3 | STATUSF_IP4 |
+				 STATUSF_IP5 | STATUSF_IP6 | STATUSF_IP7);
 
 	/* Enable per-cpu interrupts: platform specific */
 

arch/mips/kernel/smp-mt.c

@@ -161,7 +161,8 @@ static void vsmp_init_secondary(void)
 #ifdef CONFIG_MIPS_GIC
 	/* This is Malta specific: IPI,performance and timer interrupts */
 	if (gic_present)
-		change_c0_status(ST0_IM, STATUSF_IP3 | STATUSF_IP4 |
+		change_c0_status(ST0_IM, STATUSF_IP2 | STATUSF_IP3 |
+					 STATUSF_IP4 | STATUSF_IP5 |
 					 STATUSF_IP6 | STATUSF_IP7);
 	else
 #endif