Merge branches 'at91', 'bcmring', 'ep93xx', 'iop', 'misc', 'nomadik', 'omap', 'pxa', 'spear' and 'versatile' into devel

Conflicts:
	arch/arm/Makefile
	arch/arm/common/Makefile
	arch/arm/mm/Kconfig

Documentation/arm/00-INDEX

@@ -20,6 +20,8 @@ Samsung-S3C24XX
 	- S3C24XX ARM Linux Overview
 Sharp-LH
 	- Linux on Sharp LH79524 and LH7A40X System On a Chip (SOC)
+SPEAr
+	- ST SPEAr platform Linux Overview
 VFP/
 	- Release notes for Linux Kernel Vector Floating Point support code
 empeg/

Documentation/arm/SPEAr/overview.txt

@@ -0,0 +1,60 @@
+			SPEAr ARM Linux Overview
+			==========================
+
+Introduction
+------------
+
+  SPEAr (Structured Processor Enhanced Architecture).
+  weblink : http://www.st.com/spear
+
+  The ST Microelectronics SPEAr range of ARM9/CortexA9 System-on-Chip CPUs are
+  supported by the 'spear' platform of ARM Linux. Currently SPEAr300,
+  SPEAr310, SPEAr320 and SPEAr600 SOCs are supported. Support for the SPEAr13XX
+  series is in progress.
+
+  Hierarchy in SPEAr is as follows:
+
+  SPEAr (Platform)
+	- SPEAr3XX (3XX SOC series, based on ARM9)
+		- SPEAr300 (SOC)
+			- SPEAr300_EVB (Evaluation Board)
+		- SPEAr310 (SOC)
+			- SPEAr310_EVB (Evaluation Board)
+		- SPEAr320 (SOC)
+			- SPEAr320_EVB (Evaluation Board)
+	- SPEAr6XX (6XX SOC series, based on ARM9)
+		- SPEAr600 (SOC)
+			- SPEAr600_EVB (Evaluation Board)
+	- SPEAr13XX (13XX SOC series, based on ARM CORTEXA9)
+		- SPEAr1300 (SOC)
+
+  Configuration
+  -------------
+
+  A generic configuration is provided for each machine, and can be used as the
+  default by
+	make spear600_defconfig
+	make spear300_defconfig
+	make spear310_defconfig
+	make spear320_defconfig
+
+  Layout
+  ------
+
+  The common files for multiple machine families (SPEAr3XX, SPEAr6XX and
+  SPEAr13XX) are located in the platform code contained in arch/arm/plat-spear
+  with headers in plat/.
+
+  Each machine series have a directory with name arch/arm/mach-spear followed by
+  series name. Like mach-spear3xx, mach-spear6xx and mach-spear13xx.
+
+  Common file for machines of spear3xx family is mach-spear3xx/spear3xx.c and for
+  spear6xx is mach-spear6xx/spear6xx.c. mach-spear* also contain soc/machine
+  specific files, like spear300.c, spear310.c, spear320.c and spear600.c.
+  mach-spear* also contains board specific files for each machine type.
+
+
+  Document Author
+  ---------------
+
+  Viresh Kumar, (c) 2010 ST Microelectronics

MAINTAINERS

@@ -5229,6 +5229,46 @@ F:	drivers/serial/sunsu.c
 F:	drivers/serial/sunzilog.c
 F:	drivers/serial/sunzilog.h
 
+SPEAR PLATFORM SUPPORT
+M:	Viresh Kumar <viresh.kumar@st.com>
+W:	http://www.st.com/spear
+S:	Maintained
+F:	arch/arm/plat-spear/
+
+SPEAR3XX MACHINE SUPPORT
+M:	Viresh Kumar <viresh.kumar@st.com>
+W:	http://www.st.com/spear
+S:	Maintained
+F:	arch/arm/mach-spear3xx/
+
+SPEAR6XX MACHINE SUPPORT
+M:	Rajeev Kumar <rajeev-dlh.kumar@st.com>
+W:	http://www.st.com/spear
+S:	Maintained
+F:	arch/arm/mach-spear6xx/
+
+SPEAR CLOCK FRAMEWORK SUPPORT
+M:	Viresh Kumar <viresh.kumar@st.com>
+W:	http://www.st.com/spear
+S:	Maintained
+F:	arch/arm/mach-spear*/clock.c
+F:	arch/arm/mach-spear*/include/mach/clkdev.h
+F:	arch/arm/plat-spear/clock.c
+F:	arch/arm/plat-spear/include/plat/clock.h and clkdev.h
+
+SPEAR PAD MULTIPLEXING SUPPORT
+M:	Viresh Kumar <viresh.kumar@st.com>
+W:	http://www.st.com/spear
+S:	Maintained
+F:	arch/arm/plat-spear/include/plat/padmux.h
+F:	arch/arm/plat-spear/padmux.c
+F:	arch/arm/mach-spear*/spear*xx.c
+F:	arch/arm/mach-spear*/include/mach/generic.h
+F:	arch/arm/mach-spear3xx/spear3*0.c
+F:	arch/arm/mach-spear3xx/spear3*0_evb.c
+F:	arch/arm/mach-spear6xx/spear600.c
+F:	arch/arm/mach-spear6xx/spear600_evb.c
+
 SPECIALIX IO8+ MULTIPORT SERIAL CARD DRIVER
 M:	Roger Wolff <R.E.Wolff@BitWizard.nl>
 S:	Supported

arch/arm/Kconfig

@@ -21,6 +21,7 @@ config ARM
 	select HAVE_GENERIC_DMA_COHERENT
 	select HAVE_KERNEL_GZIP
 	select HAVE_KERNEL_LZO
+	select HAVE_KERNEL_LZMA
 	select HAVE_PERF_EVENTS
 	select PERF_USE_VMALLOC
 	help
@@ -42,6 +43,11 @@ config GENERIC_GPIO
 
 config GENERIC_TIME
 	bool
+	default y
+
+config ARCH_USES_GETTIMEOFFSET
+	bool
+	default n
 
 config GENERIC_CLOCKEVENTS
 	bool
@@ -231,6 +237,7 @@ config ARCH_AAEC2000
 	select CPU_ARM920T
 	select ARM_AMBA
 	select HAVE_CLK
+	select ARCH_USES_GETTIMEOFFSET
 	help
 	  This enables support for systems based on the Agilent AAEC-2000
 
@@ -238,21 +245,24 @@ config ARCH_INTEGRATOR
 	bool "ARM Ltd. Integrator family"
 	select ARM_AMBA
 	select ARCH_HAS_CPUFREQ
-	select HAVE_CLK
 	select COMMON_CLKDEV
-	select ICST525
+	select ICST
+	select GENERIC_TIME
+	select GENERIC_CLOCKEVENTS
+	select PLAT_VERSATILE
 	help
 	  Support for ARM's Integrator platform.
 
 config ARCH_REALVIEW
 	bool "ARM Ltd. RealView family"
 	select ARM_AMBA
-	select HAVE_CLK
 	select COMMON_CLKDEV
-	select ICST307
+	select ICST
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
 	select ARCH_WANT_OPTIONAL_GPIOLIB
+	select PLAT_VERSATILE
+	select ARM_TIMER_SP804
 	help
 	  This enables support for ARM Ltd RealView boards.
 
@@ -260,20 +270,36 @@ config ARCH_VERSATILE
 	bool "ARM Ltd. Versatile family"
 	select ARM_AMBA
 	select ARM_VIC
-	select HAVE_CLK
 	select COMMON_CLKDEV
-	select ICST307
+	select ICST
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
 	select ARCH_WANT_OPTIONAL_GPIOLIB
+	select PLAT_VERSATILE
+	select ARM_TIMER_SP804
 	help
 	  This enables support for ARM Ltd Versatile board.
 
+config ARCH_VEXPRESS
+	bool "ARM Ltd. Versatile Express family"
+	select ARCH_WANT_OPTIONAL_GPIOLIB
+	select ARM_AMBA
+	select ARM_TIMER_SP804
+	select COMMON_CLKDEV
+	select GENERIC_CLOCKEVENTS
+	select GENERIC_TIME
+	select HAVE_CLK
+	select ICST
+	select PLAT_VERSATILE
+	help
+	  This enables support for the ARM Ltd Versatile Express boards.
+
 config ARCH_AT91
 	bool "Atmel AT91"
 	select GENERIC_GPIO
 	select ARCH_REQUIRE_GPIOLIB
 	select HAVE_CLK
+	select ARCH_USES_GETTIMEOFFSET
 	help
 	  This enables support for systems based on the Atmel AT91RM9200,
 	  AT91SAM9 and AT91CAP9 processors.
@@ -293,6 +319,7 @@ config ARCH_BCMRING
 config ARCH_CLPS711X
 	bool "Cirrus Logic CLPS711x/EP721x-based"
 	select CPU_ARM720T
+	select ARCH_USES_GETTIMEOFFSET
 	help
 	  Support for Cirrus Logic 711x/721x based boards.
 
@@ -301,6 +328,7 @@ config ARCH_GEMINI
 	select CPU_FA526
 	select GENERIC_GPIO
 	select ARCH_REQUIRE_GPIOLIB
+	select ARCH_USES_GETTIMEOFFSET
 	help
 	  Support for the Cortina Systems Gemini family SoCs
 
@@ -309,6 +337,7 @@ config ARCH_EBSA110
 	select CPU_SA110
 	select ISA
 	select NO_IOPORT
+	select ARCH_USES_GETTIMEOFFSET
 	help
 	  This is an evaluation board for the StrongARM processor available
 	  from Digital. It has limited hardware on-board, including an
@@ -321,10 +350,10 @@ config ARCH_EP93XX
 	select ARM_AMBA
 	select ARM_VIC
 	select GENERIC_GPIO
-	select HAVE_CLK
 	select COMMON_CLKDEV
 	select ARCH_REQUIRE_GPIOLIB
 	select ARCH_HAS_HOLES_MEMORYMODEL
+	select ARCH_USES_GETTIMEOFFSET
 	help
 	  This enables support for the Cirrus EP93xx series of CPUs.
 
@@ -332,6 +361,7 @@ config ARCH_FOOTBRIDGE
 	bool "FootBridge"
 	select CPU_SA110
 	select FOOTBRIDGE
+	select ARCH_USES_GETTIMEOFFSET
 	help
 	  Support for systems based on the DC21285 companion chip
 	  ("FootBridge"), such as the Simtec CATS and the Rebel NetWinder.
@@ -341,7 +371,6 @@ config ARCH_MXC
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
 	select ARCH_REQUIRE_GPIOLIB
-	select HAVE_CLK
 	select COMMON_CLKDEV
 	help
 	  Support for Freescale MXC/iMX-based family of processors
@@ -349,7 +378,6 @@ config ARCH_MXC
 config ARCH_STMP3XXX
 	bool "Freescale STMP3xxx"
 	select CPU_ARM926T
-	select HAVE_CLK
 	select COMMON_CLKDEV
 	select ARCH_REQUIRE_GPIOLIB
 	select GENERIC_TIME
@@ -372,6 +400,7 @@ config ARCH_H720X
 	bool "Hynix HMS720x-based"
 	select CPU_ARM720T
 	select ISA_DMA_API
+	select ARCH_USES_GETTIMEOFFSET
 	help
 	  This enables support for systems based on the Hynix HMS720x
 
@@ -414,6 +443,7 @@ config ARCH_IXP23XX
 	depends on MMU
 	select CPU_XSC3
  	select PCI
+	select ARCH_USES_GETTIMEOFFSET
 	help
 	  Support for Intel's IXP23xx (XScale) family of processors.
 
@@ -422,6 +452,7 @@ config ARCH_IXP2000
 	depends on MMU
 	select CPU_XSCALE
 	select PCI
+	select ARCH_USES_GETTIMEOFFSET
 	help
 	  Support for Intel's IXP2400/2800 (XScale) family of processors.
 
@@ -440,6 +471,7 @@ config ARCH_L7200
 	bool "LinkUp-L7200"
 	select CPU_ARM720T
 	select FIQ
+	select ARCH_USES_GETTIMEOFFSET
 	help
 	  Say Y here if you intend to run this kernel on a LinkUp Systems
 	  L7200 Software Development Board which uses an ARM720T processor.
@@ -516,7 +548,6 @@ config ARCH_MMP
 	depends on MMU
 	select GENERIC_GPIO
 	select ARCH_REQUIRE_GPIOLIB
-	select HAVE_CLK
 	select COMMON_CLKDEV
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
@@ -530,6 +561,7 @@ config ARCH_KS8695
 	select CPU_ARM922T
 	select GENERIC_GPIO
         select ARCH_REQUIRE_GPIOLIB
+	select ARCH_USES_GETTIMEOFFSET
 	help
 	  Support for Micrel/Kendin KS8695 "Centaur" (ARM922T) based
 	  System-on-Chip devices.
@@ -552,7 +584,6 @@ config ARCH_W90X900
 	select CPU_ARM926T
 	select ARCH_REQUIRE_GPIOLIB
 	select GENERIC_GPIO
-	select HAVE_CLK
 	select COMMON_CLKDEV
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
@@ -568,7 +599,6 @@ config ARCH_W90X900
 config ARCH_NUC93X
 	bool "Nuvoton NUC93X CPU"
 	select CPU_ARM926T
-	select HAVE_CLK
 	select COMMON_CLKDEV
 	help
 	  Support for Nuvoton (Winbond logic dept.) NUC93X MCU,The NUC93X is a
@@ -577,8 +607,8 @@ config ARCH_NUC93X
 config ARCH_PNX4008
 	bool "Philips Nexperia PNX4008 Mobile"
 	select CPU_ARM926T
-	select HAVE_CLK
 	select COMMON_CLKDEV
+	select ARCH_USES_GETTIMEOFFSET
 	help
 	  This enables support for Philips PNX4008 mobile platform.
 
@@ -588,7 +618,6 @@ config ARCH_PXA
 	select ARCH_MTD_XIP
 	select ARCH_HAS_CPUFREQ
 	select GENERIC_GPIO
-	select HAVE_CLK
 	select COMMON_CLKDEV
 	select ARCH_REQUIRE_GPIOLIB
 	select GENERIC_TIME
@@ -624,6 +653,7 @@ config ARCH_RPC
 	select ISA_DMA_API
 	select NO_IOPORT
 	select ARCH_SPARSEMEM_ENABLE
+	select ARCH_USES_GETTIMEOFFSET
 	help
 	  On the Acorn Risc-PC, Linux can support the internal IDE disk and
 	  CD-ROM interface, serial and parallel port, and the floppy drive.
@@ -650,6 +680,7 @@ config ARCH_S3C2410
 	select GENERIC_GPIO
 	select ARCH_HAS_CPUFREQ
 	select HAVE_CLK
+	select ARCH_USES_GETTIMEOFFSET
 	help
 	  Samsung S3C2410X CPU based systems, such as the Simtec Electronics
 	  BAST (<http://www.simtec.co.uk/products/EB110ITX/>), the IPAQ 1940 or
@@ -663,6 +694,7 @@ config ARCH_S3C64XX
 	select ARM_VIC
 	select HAVE_CLK
 	select NO_IOPORT
+	select ARCH_USES_GETTIMEOFFSET
 	select ARCH_HAS_CPUFREQ
 	select ARCH_REQUIRE_GPIOLIB
 	select SAMSUNG_CLKSRC
@@ -719,6 +751,7 @@ config ARCH_SHARK
 	select ISA_DMA
 	select ZONE_DMA
 	select PCI
+	select ARCH_USES_GETTIMEOFFSET
 	help
 	  Support for the StrongARM based Digital DNARD machine, also known
 	  as "Shark" (<http://www.shark-linux.de/shark.html>).
@@ -728,6 +761,7 @@ config ARCH_LH7A40X
 	select CPU_ARM922T
 	select ARCH_DISCONTIGMEM_ENABLE if !LH7A40X_CONTIGMEM
 	select ARCH_SPARSEMEM_ENABLE if !LH7A40X_CONTIGMEM
+	select ARCH_USES_GETTIMEOFFSET
 	help
 	  Say Y here for systems based on one of the Sharp LH7A40X
 	  System on a Chip processors.  These CPUs include an ARM922T
@@ -743,7 +777,6 @@ config ARCH_U300
 	select ARM_VIC
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
-	select HAVE_CLK
 	select COMMON_CLKDEV
 	select GENERIC_GPIO
 	help
@@ -756,6 +789,7 @@ config ARCH_U8500
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
 	select COMMON_CLKDEV
+	select ARCH_REQUIRE_GPIOLIB
 	help
 	  Support for ST-Ericsson's Ux500 architecture
 
@@ -764,7 +798,6 @@ config ARCH_NOMADIK
 	select ARM_AMBA
 	select ARM_VIC
 	select CPU_ARM926T
-	select HAVE_CLK
 	select COMMON_CLKDEV
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
@@ -780,7 +813,6 @@ config ARCH_DAVINCI
 	select GENERIC_CLOCKEVENTS
 	select GENERIC_GPIO
 	select ARCH_REQUIRE_GPIOLIB
-	select HAVE_CLK
 	select ZONE_DMA
 	select HAVE_IDE
 	select COMMON_CLKDEV
@@ -801,6 +833,18 @@ config ARCH_OMAP
 	help
 	  Support for TI's OMAP platform (OMAP1 and OMAP2).
 
+config PLAT_SPEAR
+	bool "ST SPEAr"
+	select ARM_AMBA
+	select ARCH_REQUIRE_GPIOLIB
+	select COMMON_CLKDEV
+	select GENERIC_CLOCKEVENTS
+	select GENERIC_GPIO
+	select GENERIC_TIME
+	select HAVE_CLK
+	help
+	  Support for ST's SPEAr platform (SPEAr3xx, SPEAr6xx and SPEAr13xx).
+
 endchoice
 
 #
@@ -886,6 +930,7 @@ source "arch/arm/plat-samsung/Kconfig"
 source "arch/arm/plat-s3c24xx/Kconfig"
 source "arch/arm/plat-s5p/Kconfig"
 source "arch/arm/plat-s5pc1xx/Kconfig"
+source "arch/arm/plat-spear/Kconfig"
 
 if ARCH_S3C2410
 source "arch/arm/mach-s3c2400/Kconfig"
@@ -919,6 +964,8 @@ source "arch/arm/mach-ux500/Kconfig"
 
 source "arch/arm/mach-versatile/Kconfig"
 
+source "arch/arm/mach-vexpress/Kconfig"
+
 source "arch/arm/mach-w90x900/Kconfig"
 
 # Definitions to make life easier
@@ -936,6 +983,12 @@ config PLAT_ORION
 config PLAT_PXA
 	bool
 
+config PLAT_VERSATILE
+	bool
+
+config ARM_TIMER_SP804
+	bool
+
 source arch/arm/mm/Kconfig
 
 config IWMMXT
@@ -1064,6 +1117,10 @@ config PCI
 	  your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or
 	  VESA. If you have PCI, say Y, otherwise N.
 
+config PCI_DOMAINS
+	bool
+	depends on PCI
+
 config PCI_SYSCALL
 	def_bool PCI
 
@@ -1092,10 +1149,11 @@ source "kernel/time/Kconfig"
 config SMP
 	bool "Symmetric Multi-Processing (EXPERIMENTAL)"
 	depends on EXPERIMENTAL && (REALVIEW_EB_ARM11MP || REALVIEW_EB_A9MP ||\
-		 MACH_REALVIEW_PB11MP || MACH_REALVIEW_PBX || ARCH_OMAP4 || ARCH_U8500)
+		 MACH_REALVIEW_PB11MP || MACH_REALVIEW_PBX || ARCH_OMAP4 ||\
+		 ARCH_U8500 || ARCH_VEXPRESS_CA9X4)
 	depends on GENERIC_CLOCKEVENTS
 	select USE_GENERIC_SMP_HELPERS
-	select HAVE_ARM_SCU if (ARCH_REALVIEW || ARCH_OMAP4 || ARCH_U8500)
+	select HAVE_ARM_SCU if (ARCH_REALVIEW || ARCH_OMAP4 || ARCH_U8500 || ARCH_VEXPRESS_CA9X4)
 	help
 	  This enables support for systems with more than one CPU. If you have
 	  a system with only one CPU, like most personal computers, say N. If

arch/arm/Makefile

@@ -175,9 +175,14 @@ machine-$(CONFIG_ARCH_STMP37XX)		:= stmp37xx
 machine-$(CONFIG_ARCH_U300)		:= u300
 machine-$(CONFIG_ARCH_U8500)		:= ux500
 machine-$(CONFIG_ARCH_VERSATILE)	:= versatile
+machine-$(CONFIG_ARCH_VEXPRESS)		:= vexpress
 machine-$(CONFIG_ARCH_W90X900)		:= w90x900
 machine-$(CONFIG_ARCH_NUC93X)		:= nuc93x
 machine-$(CONFIG_FOOTBRIDGE)		:= footbridge
+machine-$(CONFIG_MACH_SPEAR300)		:= spear3xx
+machine-$(CONFIG_MACH_SPEAR310)		:= spear3xx
+machine-$(CONFIG_MACH_SPEAR320)		:= spear3xx
+machine-$(CONFIG_MACH_SPEAR600)		:= spear6xx
 
 # Platform directory name.  This list is sorted alphanumerically
 # by CONFIG_* macro name.
@@ -192,6 +197,8 @@ plat-$(CONFIG_PLAT_PXA)		:= pxa
 plat-$(CONFIG_PLAT_S3C24XX)	:= s3c24xx samsung
 plat-$(CONFIG_PLAT_S5PC1XX)	:= s5pc1xx samsung
 plat-$(CONFIG_PLAT_S5P)		:= s5p samsung
+plat-$(CONFIG_PLAT_SPEAR)	:= spear
+plat-$(CONFIG_PLAT_VERSATILE)	:= versatile
 
 ifeq ($(CONFIG_ARCH_EBSA110),y)
 # This is what happens if you forget the IOCS16 line.

arch/arm/boot/compressed/Makefile

@@ -65,6 +65,7 @@ SEDFLAGS	= s/TEXT_START/$(ZTEXTADDR)/;s/BSS_START/$(ZBSSADDR)/
 
 suffix_$(CONFIG_KERNEL_GZIP) = gzip
 suffix_$(CONFIG_KERNEL_LZO)  = lzo
+suffix_$(CONFIG_KERNEL_LZMA) = lzma
 
 targets       := vmlinux vmlinux.lds \
 		 piggy.$(suffix_y) piggy.$(suffix_y).o \

arch/arm/boot/compressed/decompress.c

@@ -40,6 +40,10 @@ extern void error(char *);
 #include "../../../../lib/decompress_unlzo.c"
 #endif
 
+#ifdef CONFIG_KERNEL_LZMA
+#include "../../../../lib/decompress_unlzma.c"
+#endif
+
 void do_decompress(u8 *input, int len, u8 *output, void (*error)(char *x))
 {
 	decompress(input, len, NULL, NULL, output, NULL, error);

arch/arm/boot/compressed/piggy.lzma.S

@@ -0,0 +1,6 @@
+	.section .piggydata,#alloc
+	.globl	input_data
+input_data:
+	.incbin	"arch/arm/boot/compressed/piggy.lzma"
+	.globl	input_data_end
+input_data_end:

arch/arm/common/Kconfig

@@ -12,10 +12,10 @@ config ARM_VIC_NR
 	  The maximum number of VICs available in the system, for
 	  power management.
 
-config ICST525
+config ICST
 	bool
 
-config ICST307
+config PL330
 	bool
 
 config SA1111
@@ -40,3 +40,4 @@ config SHARP_SCOOP
 
 config COMMON_CLKDEV
 	bool
+	select HAVE_CLK

arch/arm/common/Makefile

@@ -4,8 +4,8 @@
 
 obj-$(CONFIG_ARM_GIC)		+= gic.o
 obj-$(CONFIG_ARM_VIC)		+= vic.o
-obj-$(CONFIG_ICST525)		+= icst525.o
-obj-$(CONFIG_ICST307)		+= icst307.o
+obj-$(CONFIG_ICST)		+= icst.o
+obj-$(CONFIG_PL330)		+= pl330.o
 obj-$(CONFIG_SA1111)		+= sa1111.o
 obj-$(CONFIG_PCI_HOST_VIA82C505) += via82c505.o
 obj-$(CONFIG_DMABOUNCE)		+= dmabounce.o

arch/arm/common/clkdev.c

@@ -52,12 +52,13 @@ static struct clk *clk_find(const char *dev_id, const char *con_id)
 				continue;
 			match += 1;
 		}
-		if (match == 0)
-			continue;
 
 		if (match > best) {
 			clk = p->clk;
-			best = match;
+			if (match != 3)
+				best = match;
+			else
+				break;
 		}
 	}
 	return clk;

arch/arm/common/icst.c

@@ -0,0 +1,100 @@
+/*
+ *  linux/arch/arm/common/icst307.c
+ *
+ *  Copyright (C) 2003 Deep Blue Solutions, Ltd, All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  Support functions for calculating clocks/divisors for the ICST307
+ *  clock generators.  See http://www.icst.com/ for more information
+ *  on these devices.
+ *
+ *  This is an almost identical implementation to the ICST525 clock generator.
+ *  The s2div and idx2s files are different
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+
+#include <asm/hardware/icst.h>
+
+/*
+ * Divisors for each OD setting.
+ */
+const unsigned char icst307_s2div[8] = { 10, 2, 8, 4, 5, 7, 3, 6 };
+const unsigned char icst525_s2div[8] = { 10, 2, 8, 4, 5, 7, 9, 6 };
+EXPORT_SYMBOL(icst307_s2div);
+EXPORT_SYMBOL(icst525_s2div);
+
+unsigned long icst_hz(const struct icst_params *p, struct icst_vco vco)
+{
+	return p->ref * 2 * (vco.v + 8) / ((vco.r + 2) * p->s2div[vco.s]);
+}
+
+EXPORT_SYMBOL(icst_hz);
+
+/*
+ * Ascending divisor S values.
+ */
+const unsigned char icst307_idx2s[8] = { 1, 6, 3, 4, 7, 5, 2, 0 };
+const unsigned char icst525_idx2s[8] = { 1, 3, 4, 7, 5, 2, 6, 0 };
+EXPORT_SYMBOL(icst307_idx2s);
+EXPORT_SYMBOL(icst525_idx2s);
+
+struct icst_vco
+icst_hz_to_vco(const struct icst_params *p, unsigned long freq)
+{
+	struct icst_vco vco = { .s = 1, .v = p->vd_max, .r = p->rd_max };
+	unsigned long f;
+	unsigned int i = 0, rd, best = (unsigned int)-1;
+
+	/*
+	 * First, find the PLL output divisor such
+	 * that the PLL output is within spec.
+	 */
+	do {
+		f = freq * p->s2div[p->idx2s[i]];
+
+		if (f > p->vco_min && f <= p->vco_max)
+			break;
+	} while (i < 8);
+
+	if (i >= 8)
+		return vco;
+
+	vco.s = p->idx2s[i];
+
+	/*
+	 * Now find the closest divisor combination
+	 * which gives a PLL output of 'f'.
+	 */
+	for (rd = p->rd_min; rd <= p->rd_max; rd++) {
+		unsigned long fref_div, f_pll;
+		unsigned int vd;
+		int f_diff;
+
+		fref_div = (2 * p->ref) / rd;
+
+		vd = (f + fref_div / 2) / fref_div;
+		if (vd < p->vd_min || vd > p->vd_max)
+			continue;
+
+		f_pll = fref_div * vd;
+		f_diff = f_pll - f;
+		if (f_diff < 0)
+			f_diff = -f_diff;
+
+		if ((unsigned)f_diff < best) {
+			vco.v = vd - 8;
+			vco.r = rd - 2;
+			if (f_diff == 0)
+				break;
+			best = f_diff;
+		}
+	}
+
+	return vco;
+}
+
+EXPORT_SYMBOL(icst_hz_to_vco);

arch/arm/common/icst307.c

@@ -1,161 +0,0 @@
-/*
- *  linux/arch/arm/common/icst307.c
- *
- *  Copyright (C) 2003 Deep Blue Solutions, Ltd, All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  Support functions for calculating clocks/divisors for the ICST307
- *  clock generators.  See http://www.icst.com/ for more information
- *  on these devices.
- *
- *  This is an almost identical implementation to the ICST525 clock generator.
- *  The s2div and idx2s files are different
- */
-#include <linux/module.h>
-#include <linux/kernel.h>
-
-#include <asm/hardware/icst307.h>
-
-/*
- * Divisors for each OD setting.
- */
-static unsigned char s2div[8] = { 10, 2, 8, 4, 5, 7, 3, 6 };
-
-unsigned long icst307_khz(const struct icst307_params *p, struct icst307_vco vco)
-{
-	return p->ref * 2 * (vco.v + 8) / ((vco.r + 2) * s2div[vco.s]);
-}
-
-EXPORT_SYMBOL(icst307_khz);
-
-/*
- * Ascending divisor S values.
- */
-static unsigned char idx2s[8] = { 1, 6, 3, 4, 7, 5, 2, 0 };
-
-struct icst307_vco
-icst307_khz_to_vco(const struct icst307_params *p, unsigned long freq)
-{
-	struct icst307_vco vco = { .s = 1, .v = p->vd_max, .r = p->rd_max };
-	unsigned long f;
-	unsigned int i = 0, rd, best = (unsigned int)-1;
-
-	/*
-	 * First, find the PLL output divisor such
-	 * that the PLL output is within spec.
-	 */
-	do {
-		f = freq * s2div[idx2s[i]];
-
-		/*
-		 * f must be between 6MHz and 200MHz (3.3 or 5V)
-		 */
-		if (f > 6000 && f <= p->vco_max)
-			break;
-	} while (i < ARRAY_SIZE(idx2s));
-
-	if (i >= ARRAY_SIZE(idx2s))
-		return vco;
-
-	vco.s = idx2s[i];
-
-	/*
-	 * Now find the closest divisor combination
-	 * which gives a PLL output of 'f'.
-	 */
-	for (rd = p->rd_min; rd <= p->rd_max; rd++) {
-		unsigned long fref_div, f_pll;
-		unsigned int vd;
-		int f_diff;
-
-		fref_div = (2 * p->ref) / rd;
-
-		vd = (f + fref_div / 2) / fref_div;
-		if (vd < p->vd_min || vd > p->vd_max)
-			continue;
-
-		f_pll = fref_div * vd;
-		f_diff = f_pll - f;
-		if (f_diff < 0)
-			f_diff = -f_diff;
-
-		if ((unsigned)f_diff < best) {
-			vco.v = vd - 8;
-			vco.r = rd - 2;
-			if (f_diff == 0)
-				break;
-			best = f_diff;
-		}
-	}
-
-	return vco;
-}
-
-EXPORT_SYMBOL(icst307_khz_to_vco);
-
-struct icst307_vco
-icst307_ps_to_vco(const struct icst307_params *p, unsigned long period)
-{
-	struct icst307_vco vco = { .s = 1, .v = p->vd_max, .r = p->rd_max };
-	unsigned long f, ps;
-	unsigned int i = 0, rd, best = (unsigned int)-1;
-
-	ps = 1000000000UL / p->vco_max;
-
-	/*
-	 * First, find the PLL output divisor such
-	 * that the PLL output is within spec.
-	 */
-	do {
-		f = period / s2div[idx2s[i]];
-
-		/*
-		 * f must be between 6MHz and 200MHz (3.3 or 5V)
-		 */
-		if (f >= ps && f < 1000000000UL / 6000 + 1)
-			break;
-	} while (i < ARRAY_SIZE(idx2s));
-
-	if (i >= ARRAY_SIZE(idx2s))
-		return vco;
-
-	vco.s = idx2s[i];
-
-	ps = 500000000UL / p->ref;
-
-	/*
-	 * Now find the closest divisor combination
-	 * which gives a PLL output of 'f'.
-	 */
-	for (rd = p->rd_min; rd <= p->rd_max; rd++) {
-		unsigned long f_in_div, f_pll;
-		unsigned int vd;
-		int f_diff;
-
-		f_in_div = ps * rd;
-
-		vd = (f_in_div + f / 2) / f;
-		if (vd < p->vd_min || vd > p->vd_max)
-			continue;
-
-		f_pll = (f_in_div + vd / 2) / vd;
-		f_diff = f_pll - f;
-		if (f_diff < 0)
-			f_diff = -f_diff;
-
-		if ((unsigned)f_diff < best) {
-			vco.v = vd - 8;
-			vco.r = rd - 2;
-			if (f_diff == 0)
-				break;
-			best = f_diff;
-		}
-	}
-
-	return vco;
-}
-
-EXPORT_SYMBOL(icst307_ps_to_vco);

arch/arm/common/icst525.c

@@ -1,160 +0,0 @@
-/*
- *  linux/arch/arm/common/icst525.c
- *
- *  Copyright (C) 2003 Deep Blue Solutions, Ltd, All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  Support functions for calculating clocks/divisors for the ICST525
- *  clock generators.  See http://www.icst.com/ for more information
- *  on these devices.
- */
-#include <linux/module.h>
-#include <linux/kernel.h>
-
-#include <asm/hardware/icst525.h>
-
-/*
- * Divisors for each OD setting.
- */
-static unsigned char s2div[8] = { 10, 2, 8, 4, 5, 7, 9, 6 };
-
-unsigned long icst525_khz(const struct icst525_params *p, struct icst525_vco vco)
-{
-	return p->ref * 2 * (vco.v + 8) / ((vco.r + 2) * s2div[vco.s]);
-}
-
-EXPORT_SYMBOL(icst525_khz);
-
-/*
- * Ascending divisor S values.
- */
-static unsigned char idx2s[] = { 1, 3, 4, 7, 5, 2, 6, 0 };
-
-struct icst525_vco
-icst525_khz_to_vco(const struct icst525_params *p, unsigned long freq)
-{
-	struct icst525_vco vco = { .s = 1, .v = p->vd_max, .r = p->rd_max };
-	unsigned long f;
-	unsigned int i = 0, rd, best = (unsigned int)-1;
-
-	/*
-	 * First, find the PLL output divisor such
-	 * that the PLL output is within spec.
-	 */
-	do {
-		f = freq * s2div[idx2s[i]];
-
-		/*
-		 * f must be between 10MHz and
-		 *  320MHz (5V) or 200MHz (3V)
-		 */
-		if (f > 10000 && f <= p->vco_max)
-			break;
-	} while (i < ARRAY_SIZE(idx2s));
-
-	if (i >= ARRAY_SIZE(idx2s))
-		return vco;
-
-	vco.s = idx2s[i];
-
-	/*
-	 * Now find the closest divisor combination
-	 * which gives a PLL output of 'f'.
-	 */
-	for (rd = p->rd_min; rd <= p->rd_max; rd++) {
-		unsigned long fref_div, f_pll;
-		unsigned int vd;
-		int f_diff;
-
-		fref_div = (2 * p->ref) / rd;
-
-		vd = (f + fref_div / 2) / fref_div;
-		if (vd < p->vd_min || vd > p->vd_max)
-			continue;
-
-		f_pll = fref_div * vd;
-		f_diff = f_pll - f;
-		if (f_diff < 0)
-			f_diff = -f_diff;
-
-		if ((unsigned)f_diff < best) {
-			vco.v = vd - 8;
-			vco.r = rd - 2;
-			if (f_diff == 0)
-				break;
-			best = f_diff;
-		}
-	}
-
-	return vco;
-}
-
-EXPORT_SYMBOL(icst525_khz_to_vco);
-
-struct icst525_vco
-icst525_ps_to_vco(const struct icst525_params *p, unsigned long period)
-{
-	struct icst525_vco vco = { .s = 1, .v = p->vd_max, .r = p->rd_max };
-	unsigned long f, ps;
-	unsigned int i = 0, rd, best = (unsigned int)-1;
-
-	ps = 1000000000UL / p->vco_max;
-
-	/*
-	 * First, find the PLL output divisor such
-	 * that the PLL output is within spec.
-	 */
-	do {
-		f = period / s2div[idx2s[i]];
-
-		/*
-		 * f must be between 10MHz and
-		 *  320MHz (5V) or 200MHz (3V)
-		 */
-		if (f >= ps && f < 100000)
-			break;
-	} while (i < ARRAY_SIZE(idx2s));
-
-	if (i >= ARRAY_SIZE(idx2s))
-		return vco;
-
-	vco.s = idx2s[i];
-
-	ps = 500000000UL / p->ref;
-
-	/*
-	 * Now find the closest divisor combination
-	 * which gives a PLL output of 'f'.
-	 */
-	for (rd = p->rd_min; rd <= p->rd_max; rd++) {
-		unsigned long f_in_div, f_pll;
-		unsigned int vd;
-		int f_diff;
-
-		f_in_div = ps * rd;
-
-		vd = (f_in_div + f / 2) / f;
-		if (vd < p->vd_min || vd > p->vd_max)
-			continue;
-
-		f_pll = (f_in_div + vd / 2) / vd;
-		f_diff = f_pll - f;
-		if (f_diff < 0)
-			f_diff = -f_diff;
-
-		if ((unsigned)f_diff < best) {
-			vco.v = vd - 8;
-			vco.r = rd - 2;
-			if (f_diff == 0)
-				break;
-			best = f_diff;
-		}
-	}
-
-	return vco;
-}
-
-EXPORT_SYMBOL(icst525_ps_to_vco);

arch/arm/common/pl330.c

@@ -0,0 +1,1966 @@
+/* linux/arch/arm/common/pl330.c
+ *
+ * Copyright (C) 2010 Samsung Electronics Co Ltd.
+ *	Jaswinder Singh <jassi.brar@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/string.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/dma-mapping.h>
+
+#include <asm/hardware/pl330.h>
+
+/* Register and Bit field Definitions */
+#define DS		0x0
+#define DS_ST_STOP	0x0
+#define DS_ST_EXEC	0x1
+#define DS_ST_CMISS	0x2
+#define DS_ST_UPDTPC	0x3
+#define DS_ST_WFE	0x4
+#define DS_ST_ATBRR	0x5
+#define DS_ST_QBUSY	0x6
+#define DS_ST_WFP	0x7
+#define DS_ST_KILL	0x8
+#define DS_ST_CMPLT	0x9
+#define DS_ST_FLTCMP	0xe
+#define DS_ST_FAULT	0xf
+
+#define DPC		0x4
+#define INTEN		0x20
+#define ES		0x24
+#define INTSTATUS	0x28
+#define INTCLR		0x2c
+#define FSM		0x30
+#define FSC		0x34
+#define FTM		0x38
+
+#define _FTC		0x40
+#define FTC(n)		(_FTC + (n)*0x4)
+
+#define _CS		0x100
+#define CS(n)		(_CS + (n)*0x8)
+#define CS_CNS		(1 << 21)
+
+#define _CPC		0x104
+#define CPC(n)		(_CPC + (n)*0x8)
+
+#define _SA		0x400
+#define SA(n)		(_SA + (n)*0x20)
+
+#define _DA		0x404
+#define DA(n)		(_DA + (n)*0x20)
+
+#define _CC		0x408
+#define CC(n)		(_CC + (n)*0x20)
+
+#define CC_SRCINC	(1 << 0)
+#define CC_DSTINC	(1 << 14)
+#define CC_SRCPRI	(1 << 8)
+#define CC_DSTPRI	(1 << 22)
+#define CC_SRCNS	(1 << 9)
+#define CC_DSTNS	(1 << 23)
+#define CC_SRCIA	(1 << 10)
+#define CC_DSTIA	(1 << 24)
+#define CC_SRCBRSTLEN_SHFT	4
+#define CC_DSTBRSTLEN_SHFT	18
+#define CC_SRCBRSTSIZE_SHFT	1
+#define CC_DSTBRSTSIZE_SHFT	15
+#define CC_SRCCCTRL_SHFT	11
+#define CC_SRCCCTRL_MASK	0x7
+#define CC_DSTCCTRL_SHFT	25
+#define CC_DRCCCTRL_MASK	0x7
+#define CC_SWAP_SHFT	28
+
+#define _LC0		0x40c
+#define LC0(n)		(_LC0 + (n)*0x20)
+
+#define _LC1		0x410
+#define LC1(n)		(_LC1 + (n)*0x20)
+
+#define DBGSTATUS	0xd00
+#define DBG_BUSY	(1 << 0)
+
+#define DBGCMD		0xd04
+#define DBGINST0	0xd08
+#define DBGINST1	0xd0c
+
+#define CR0		0xe00
+#define CR1		0xe04
+#define CR2		0xe08
+#define CR3		0xe0c
+#define CR4		0xe10
+#define CRD		0xe14
+
+#define PERIPH_ID	0xfe0
+#define PCELL_ID	0xff0
+
+#define CR0_PERIPH_REQ_SET	(1 << 0)
+#define CR0_BOOT_EN_SET		(1 << 1)
+#define CR0_BOOT_MAN_NS		(1 << 2)
+#define CR0_NUM_CHANS_SHIFT	4
+#define CR0_NUM_CHANS_MASK	0x7
+#define CR0_NUM_PERIPH_SHIFT	12
+#define CR0_NUM_PERIPH_MASK	0x1f
+#define CR0_NUM_EVENTS_SHIFT	17
+#define CR0_NUM_EVENTS_MASK	0x1f
+
+#define CR1_ICACHE_LEN_SHIFT	0
+#define CR1_ICACHE_LEN_MASK	0x7
+#define CR1_NUM_ICACHELINES_SHIFT	4
+#define CR1_NUM_ICACHELINES_MASK	0xf
+
+#define CRD_DATA_WIDTH_SHIFT	0
+#define CRD_DATA_WIDTH_MASK	0x7
+#define CRD_WR_CAP_SHIFT	4
+#define CRD_WR_CAP_MASK		0x7
+#define CRD_WR_Q_DEP_SHIFT	8
+#define CRD_WR_Q_DEP_MASK	0xf
+#define CRD_RD_CAP_SHIFT	12
+#define CRD_RD_CAP_MASK		0x7
+#define CRD_RD_Q_DEP_SHIFT	16
+#define CRD_RD_Q_DEP_MASK	0xf
+#define CRD_DATA_BUFF_SHIFT	20
+#define CRD_DATA_BUFF_MASK	0x3ff
+
+#define	PART		0x330
+#define DESIGNER	0x41
+#define REVISION	0x0
+#define INTEG_CFG	0x0
+#define PERIPH_ID_VAL	((PART << 0) | (DESIGNER << 12) \
+			  | (REVISION << 20) | (INTEG_CFG << 24))
+
+#define PCELL_ID_VAL	0xb105f00d
+
+#define PL330_STATE_STOPPED		(1 << 0)
+#define PL330_STATE_EXECUTING		(1 << 1)
+#define PL330_STATE_WFE			(1 << 2)
+#define PL330_STATE_FAULTING		(1 << 3)
+#define PL330_STATE_COMPLETING		(1 << 4)
+#define PL330_STATE_WFP			(1 << 5)
+#define PL330_STATE_KILLING		(1 << 6)
+#define PL330_STATE_FAULT_COMPLETING	(1 << 7)
+#define PL330_STATE_CACHEMISS		(1 << 8)
+#define PL330_STATE_UPDTPC		(1 << 9)
+#define PL330_STATE_ATBARRIER		(1 << 10)
+#define PL330_STATE_QUEUEBUSY		(1 << 11)
+#define PL330_STATE_INVALID		(1 << 15)
+
+#define PL330_STABLE_STATES (PL330_STATE_STOPPED | PL330_STATE_EXECUTING \
+				| PL330_STATE_WFE | PL330_STATE_FAULTING)
+
+#define CMD_DMAADDH	0x54
+#define CMD_DMAEND	0x00
+#define CMD_DMAFLUSHP	0x35
+#define CMD_DMAGO	0xa0
+#define CMD_DMALD	0x04
+#define CMD_DMALDP	0x25
+#define CMD_DMALP	0x20
+#define CMD_DMALPEND	0x28
+#define CMD_DMAKILL	0x01
+#define CMD_DMAMOV	0xbc
+#define CMD_DMANOP	0x18
+#define CMD_DMARMB	0x12
+#define CMD_DMASEV	0x34
+#define CMD_DMAST	0x08
+#define CMD_DMASTP	0x29
+#define CMD_DMASTZ	0x0c
+#define CMD_DMAWFE	0x36
+#define CMD_DMAWFP	0x30
+#define CMD_DMAWMB	0x13
+
+#define SZ_DMAADDH	3
+#define SZ_DMAEND	1
+#define SZ_DMAFLUSHP	2
+#define SZ_DMALD	1
+#define SZ_DMALDP	2
+#define SZ_DMALP	2
+#define SZ_DMALPEND	2
+#define SZ_DMAKILL	1
+#define SZ_DMAMOV	6
+#define SZ_DMANOP	1
+#define SZ_DMARMB	1
+#define SZ_DMASEV	2
+#define SZ_DMAST	1
+#define SZ_DMASTP	2
+#define SZ_DMASTZ	1
+#define SZ_DMAWFE	2
+#define SZ_DMAWFP	2
+#define SZ_DMAWMB	1
+#define SZ_DMAGO	6
+
+#define BRST_LEN(ccr)	((((ccr) >> CC_SRCBRSTLEN_SHFT) & 0xf) + 1)
+#define BRST_SIZE(ccr)	(1 << (((ccr) >> CC_SRCBRSTSIZE_SHFT) & 0x7))
+
+#define BYTE_TO_BURST(b, ccr)  ((b) / BRST_SIZE(ccr) / BRST_LEN(ccr))
+#define BURST_TO_BYTE(c, ccr)  ((c) * BRST_SIZE(ccr) * BRST_LEN(ccr))
+
+/*
+ * With 256 bytes, we can do more than 2.5MB and 5MB xfers per req
+ * at 1byte/burst for P<->M and M<->M respectively.
+ * For typical scenario, at 1word/burst, 10MB and 20MB xfers per req
+ * should be enough for P<->M and M<->M respectively.
+ */
+#define MCODE_BUFF_PER_REQ	256
+
+/*
+ * Mark a _pl330_req as free.
+ * We do it by writing DMAEND as the first instruction
+ * because no valid request is going to have DMAEND as
+ * its first instruction to execute.
+ */
+#define MARK_FREE(req)	do { \
+				_emit_END(0, (req)->mc_cpu); \
+				(req)->mc_len = 0; \
+			} while (0)
+
+/* If the _pl330_req is available to the client */
+#define IS_FREE(req)	(*((u8 *)((req)->mc_cpu)) == CMD_DMAEND)
+
+/* Use this _only_ to wait on transient states */
+#define UNTIL(t, s)	while (!(_state(t) & (s))) cpu_relax();
+
+#ifdef PL330_DEBUG_MCGEN
+static unsigned cmd_line;
+#define PL330_DBGCMD_DUMP(off, x...)	do { \
+						printk("%x:", cmd_line); \
+						printk(x); \
+						cmd_line += off; \
+					} while (0)
+#define PL330_DBGMC_START(addr)		(cmd_line = addr)
+#else
+#define PL330_DBGCMD_DUMP(off, x...)	do {} while (0)
+#define PL330_DBGMC_START(addr)		do {} while (0)
+#endif
+
+struct _xfer_spec {
+	u32 ccr;
+	struct pl330_req *r;
+	struct pl330_xfer *x;
+};
+
+enum dmamov_dst {
+	SAR = 0,
+	CCR,
+	DAR,
+};
+
+enum pl330_dst {
+	SRC = 0,
+	DST,
+};
+
+enum pl330_cond {
+	SINGLE,
+	BURST,
+	ALWAYS,
+};
+
+struct _pl330_req {
+	u32 mc_bus;
+	void *mc_cpu;
+	/* Number of bytes taken to setup MC for the req */
+	u32 mc_len;
+	struct pl330_req *r;
+	/* Hook to attach to DMAC's list of reqs with due callback */
+	struct list_head rqd;
+};
+
+/* ToBeDone for tasklet */
+struct _pl330_tbd {
+	bool reset_dmac;
+	bool reset_mngr;
+	u8 reset_chan;
+};
+
+/* A DMAC Thread */
+struct pl330_thread {
+	u8 id;
+	int ev;
+	/* If the channel is not yet acquired by any client */
+	bool free;
+	/* Parent DMAC */
+	struct pl330_dmac *dmac;
+	/* Only two at a time */
+	struct _pl330_req req[2];
+	/* Index of the last submitted request */
+	unsigned lstenq;
+};
+
+enum pl330_dmac_state {
+	UNINIT,
+	INIT,
+	DYING,
+};
+
+/* A DMAC */
+struct pl330_dmac {
+	spinlock_t		lock;
+	/* Holds list of reqs with due callbacks */
+	struct list_head	req_done;
+	/* Pointer to platform specific stuff */
+	struct pl330_info	*pinfo;
+	/* Maximum possible events/irqs */
+	int			events[32];
+	/* BUS address of MicroCode buffer */
+	u32			mcode_bus;
+	/* CPU address of MicroCode buffer */
+	void			*mcode_cpu;
+	/* List of all Channel threads */
+	struct pl330_thread	*channels;
+	/* Pointer to the MANAGER thread */
+	struct pl330_thread	*manager;
+	/* To handle bad news in interrupt */
+	struct tasklet_struct	tasks;
+	struct _pl330_tbd	dmac_tbd;
+	/* State of DMAC operation */
+	enum pl330_dmac_state	state;
+};
+
+static inline void _callback(struct pl330_req *r, enum pl330_op_err err)
+{
+	if (r && r->xfer_cb)
+		r->xfer_cb(r->token, err);
+}
+
+static inline bool _queue_empty(struct pl330_thread *thrd)
+{
+	return (IS_FREE(&thrd->req[0]) && IS_FREE(&thrd->req[1]))
+		? true : false;
+}
+
+static inline bool _queue_full(struct pl330_thread *thrd)
+{
+	return (IS_FREE(&thrd->req[0]) || IS_FREE(&thrd->req[1]))
+		? false : true;
+}
+
+static inline bool is_manager(struct pl330_thread *thrd)
+{
+	struct pl330_dmac *pl330 = thrd->dmac;
+
+	/* MANAGER is indexed at the end */
+	if (thrd->id == pl330->pinfo->pcfg.num_chan)
+		return true;
+	else
+		return false;
+}
+
+/* If manager of the thread is in Non-Secure mode */
+static inline bool _manager_ns(struct pl330_thread *thrd)
+{
+	struct pl330_dmac *pl330 = thrd->dmac;
+
+	return (pl330->pinfo->pcfg.mode & DMAC_MODE_NS) ? true : false;
+}
+
+static inline u32 get_id(struct pl330_info *pi, u32 off)
+{
+	void __iomem *regs = pi->base;
+	u32 id = 0;
+
+	id |= (readb(regs + off + 0x0) << 0);
+	id |= (readb(regs + off + 0x4) << 8);
+	id |= (readb(regs + off + 0x8) << 16);
+	id |= (readb(regs + off + 0xc) << 24);
+
+	return id;
+}
+
+static inline u32 _emit_ADDH(unsigned dry_run, u8 buf[],
+		enum pl330_dst da, u16 val)
+{
+	if (dry_run)
+		return SZ_DMAADDH;
+
+	buf[0] = CMD_DMAADDH;
+	buf[0] |= (da << 1);
+	*((u16 *)&buf[1]) = val;
+
+	PL330_DBGCMD_DUMP(SZ_DMAADDH, "\tDMAADDH %s %u\n",
+		da == 1 ? "DA" : "SA", val);
+
+	return SZ_DMAADDH;
+}
+
+static inline u32 _emit_END(unsigned dry_run, u8 buf[])
+{
+	if (dry_run)
+		return SZ_DMAEND;
+
+	buf[0] = CMD_DMAEND;
+
+	PL330_DBGCMD_DUMP(SZ_DMAEND, "\tDMAEND\n");
+
+	return SZ_DMAEND;
+}
+
+static inline u32 _emit_FLUSHP(unsigned dry_run, u8 buf[], u8 peri)
+{
+	if (dry_run)
+		return SZ_DMAFLUSHP;
+
+	buf[0] = CMD_DMAFLUSHP;
+
+	peri &= 0x1f;
+	peri <<= 3;
+	buf[1] = peri;
+
+	PL330_DBGCMD_DUMP(SZ_DMAFLUSHP, "\tDMAFLUSHP %u\n", peri >> 3);
+
+	return SZ_DMAFLUSHP;
+}
+
+static inline u32 _emit_LD(unsigned dry_run, u8 buf[],	enum pl330_cond cond)
+{
+	if (dry_run)
+		return SZ_DMALD;
+
+	buf[0] = CMD_DMALD;
+
+	if (cond == SINGLE)
+		buf[0] |= (0 << 1) | (1 << 0);
+	else if (cond == BURST)
+		buf[0] |= (1 << 1) | (1 << 0);
+
+	PL330_DBGCMD_DUMP(SZ_DMALD, "\tDMALD%c\n",
+		cond == SINGLE ? 'S' : (cond == BURST ? 'B' : 'A'));
+
+	return SZ_DMALD;
+}
+
+static inline u32 _emit_LDP(unsigned dry_run, u8 buf[],
+		enum pl330_cond cond, u8 peri)
+{
+	if (dry_run)
+		return SZ_DMALDP;
+
+	buf[0] = CMD_DMALDP;
+
+	if (cond == BURST)
+		buf[0] |= (1 << 1);
+
+	peri &= 0x1f;
+	peri <<= 3;
+	buf[1] = peri;
+
+	PL330_DBGCMD_DUMP(SZ_DMALDP, "\tDMALDP%c %u\n",
+		cond == SINGLE ? 'S' : 'B', peri >> 3);
+
+	return SZ_DMALDP;
+}
+
+static inline u32 _emit_LP(unsigned dry_run, u8 buf[],
+		unsigned loop, u8 cnt)
+{
+	if (dry_run)
+		return SZ_DMALP;
+
+	buf[0] = CMD_DMALP;
+
+	if (loop)
+		buf[0] |= (1 << 1);
+
+	cnt--; /* DMAC increments by 1 internally */
+	buf[1] = cnt;
+
+	PL330_DBGCMD_DUMP(SZ_DMALP, "\tDMALP_%c %u\n", loop ? '1' : '0', cnt);
+
+	return SZ_DMALP;
+}
+
+struct _arg_LPEND {
+	enum pl330_cond cond;
+	bool forever;
+	unsigned loop;
+	u8 bjump;
+};
+
+static inline u32 _emit_LPEND(unsigned dry_run, u8 buf[],
+		const struct _arg_LPEND *arg)
+{
+	enum pl330_cond cond = arg->cond;
+	bool forever = arg->forever;
+	unsigned loop = arg->loop;
+	u8 bjump = arg->bjump;
+
+	if (dry_run)
+		return SZ_DMALPEND;
+
+	buf[0] = CMD_DMALPEND;
+
+	if (loop)
+		buf[0] |= (1 << 2);
+
+	if (!forever)
+		buf[0] |= (1 << 4);
+
+	if (cond == SINGLE)
+		buf[0] |= (0 << 1) | (1 << 0);
+	else if (cond == BURST)
+		buf[0] |= (1 << 1) | (1 << 0);
+
+	buf[1] = bjump;
+
+	PL330_DBGCMD_DUMP(SZ_DMALPEND, "\tDMALP%s%c_%c bjmpto_%x\n",
+			forever ? "FE" : "END",
+			cond == SINGLE ? 'S' : (cond == BURST ? 'B' : 'A'),
+			loop ? '1' : '0',
+			bjump);
+
+	return SZ_DMALPEND;
+}
+
+static inline u32 _emit_KILL(unsigned dry_run, u8 buf[])
+{
+	if (dry_run)
+		return SZ_DMAKILL;
+
+	buf[0] = CMD_DMAKILL;
+
+	return SZ_DMAKILL;
+}
+
+static inline u32 _emit_MOV(unsigned dry_run, u8 buf[],
+		enum dmamov_dst dst, u32 val)
+{
+	if (dry_run)
+		return SZ_DMAMOV;
+
+	buf[0] = CMD_DMAMOV;
+	buf[1] = dst;
+	*((u32 *)&buf[2]) = val;
+
+	PL330_DBGCMD_DUMP(SZ_DMAMOV, "\tDMAMOV %s 0x%x\n",
+		dst == SAR ? "SAR" : (dst == DAR ? "DAR" : "CCR"), val);
+
+	return SZ_DMAMOV;
+}
+
+static inline u32 _emit_NOP(unsigned dry_run, u8 buf[])
+{
+	if (dry_run)
+		return SZ_DMANOP;
+
+	buf[0] = CMD_DMANOP;
+
+	PL330_DBGCMD_DUMP(SZ_DMANOP, "\tDMANOP\n");
+
+	return SZ_DMANOP;
+}
+
+static inline u32 _emit_RMB(unsigned dry_run, u8 buf[])
+{
+	if (dry_run)
+		return SZ_DMARMB;
+
+	buf[0] = CMD_DMARMB;
+
+	PL330_DBGCMD_DUMP(SZ_DMARMB, "\tDMARMB\n");
+
+	return SZ_DMARMB;
+}
+
+static inline u32 _emit_SEV(unsigned dry_run, u8 buf[], u8 ev)
+{
+	if (dry_run)
+		return SZ_DMASEV;
+
+	buf[0] = CMD_DMASEV;
+
+	ev &= 0x1f;
+	ev <<= 3;
+	buf[1] = ev;
+
+	PL330_DBGCMD_DUMP(SZ_DMASEV, "\tDMASEV %u\n", ev >> 3);
+
+	return SZ_DMASEV;
+}
+
+static inline u32 _emit_ST(unsigned dry_run, u8 buf[], enum pl330_cond cond)
+{
+	if (dry_run)
+		return SZ_DMAST;
+
+	buf[0] = CMD_DMAST;
+
+	if (cond == SINGLE)
+		buf[0] |= (0 << 1) | (1 << 0);
+	else if (cond == BURST)
+		buf[0] |= (1 << 1) | (1 << 0);
+
+	PL330_DBGCMD_DUMP(SZ_DMAST, "\tDMAST%c\n",
+		cond == SINGLE ? 'S' : (cond == BURST ? 'B' : 'A'));
+
+	return SZ_DMAST;
+}
+
+static inline u32 _emit_STP(unsigned dry_run, u8 buf[],
+		enum pl330_cond cond, u8 peri)
+{
+	if (dry_run)
+		return SZ_DMASTP;
+
+	buf[0] = CMD_DMASTP;
+
+	if (cond == BURST)
+		buf[0] |= (1 << 1);
+
+	peri &= 0x1f;
+	peri <<= 3;
+	buf[1] = peri;
+
+	PL330_DBGCMD_DUMP(SZ_DMASTP, "\tDMASTP%c %u\n",
+		cond == SINGLE ? 'S' : 'B', peri >> 3);
+
+	return SZ_DMASTP;
+}
+
+static inline u32 _emit_STZ(unsigned dry_run, u8 buf[])
+{
+	if (dry_run)
+		return SZ_DMASTZ;
+
+	buf[0] = CMD_DMASTZ;
+
+	PL330_DBGCMD_DUMP(SZ_DMASTZ, "\tDMASTZ\n");
+
+	return SZ_DMASTZ;
+}
+
+static inline u32 _emit_WFE(unsigned dry_run, u8 buf[], u8 ev,
+		unsigned invalidate)
+{
+	if (dry_run)
+		return SZ_DMAWFE;
+
+	buf[0] = CMD_DMAWFE;
+
+	ev &= 0x1f;
+	ev <<= 3;
+	buf[1] = ev;
+
+	if (invalidate)
+		buf[1] |= (1 << 1);
+
+	PL330_DBGCMD_DUMP(SZ_DMAWFE, "\tDMAWFE %u%s\n",
+		ev >> 3, invalidate ? ", I" : "");
+
+	return SZ_DMAWFE;
+}
+
+static inline u32 _emit_WFP(unsigned dry_run, u8 buf[],
+		enum pl330_cond cond, u8 peri)
+{
+	if (dry_run)
+		return SZ_DMAWFP;
+
+	buf[0] = CMD_DMAWFP;
+
+	if (cond == SINGLE)
+		buf[0] |= (0 << 1) | (0 << 0);
+	else if (cond == BURST)
+		buf[0] |= (1 << 1) | (0 << 0);
+	else
+		buf[0] |= (0 << 1) | (1 << 0);
+
+	peri &= 0x1f;
+	peri <<= 3;
+	buf[1] = peri;
+
+	PL330_DBGCMD_DUMP(SZ_DMAWFP, "\tDMAWFP%c %u\n",
+		cond == SINGLE ? 'S' : (cond == BURST ? 'B' : 'P'), peri >> 3);
+
+	return SZ_DMAWFP;
+}
+
+static inline u32 _emit_WMB(unsigned dry_run, u8 buf[])
+{
+	if (dry_run)
+		return SZ_DMAWMB;
+
+	buf[0] = CMD_DMAWMB;
+
+	PL330_DBGCMD_DUMP(SZ_DMAWMB, "\tDMAWMB\n");
+
+	return SZ_DMAWMB;
+}
+
+struct _arg_GO {
+	u8 chan;
+	u32 addr;
+	unsigned ns;
+};
+
+static inline u32 _emit_GO(unsigned dry_run, u8 buf[],
+		const struct _arg_GO *arg)
+{
+	u8 chan = arg->chan;
+	u32 addr = arg->addr;
+	unsigned ns = arg->ns;
+
+	if (dry_run)
+		return SZ_DMAGO;
+
+	buf[0] = CMD_DMAGO;
+	buf[0] |= (ns << 1);
+
+	buf[1] = chan & 0x7;
+
+	*((u32 *)&buf[2]) = addr;
+
+	return SZ_DMAGO;
+}
+
+#define msecs_to_loops(t) (loops_per_jiffy / 1000 * HZ * t)
+
+/* Returns Time-Out */
+static bool _until_dmac_idle(struct pl330_thread *thrd)
+{
+	void __iomem *regs = thrd->dmac->pinfo->base;
+	unsigned long loops = msecs_to_loops(5);
+
+	do {
+		/* Until Manager is Idle */
+		if (!(readl(regs + DBGSTATUS) & DBG_BUSY))
+			break;
+
+		cpu_relax();
+	} while (--loops);
+
+	if (!loops)
+		return true;
+
+	return false;
+}
+
+static inline void _execute_DBGINSN(struct pl330_thread *thrd,
+		u8 insn[], bool as_manager)
+{
+	void __iomem *regs = thrd->dmac->pinfo->base;
+	u32 val;
+
+	val = (insn[0] << 16) | (insn[1] << 24);
+	if (!as_manager) {
+		val |= (1 << 0);
+		val |= (thrd->id << 8); /* Channel Number */
+	}
+	writel(val, regs + DBGINST0);
+
+	val = *((u32 *)&insn[2]);
+	writel(val, regs + DBGINST1);
+
+	/* If timed out due to halted state-machine */
+	if (_until_dmac_idle(thrd)) {
+		dev_err(thrd->dmac->pinfo->dev, "DMAC halted!\n");
+		return;
+	}
+
+	/* Get going */
+	writel(0, regs + DBGCMD);
+}
+
+static inline u32 _state(struct pl330_thread *thrd)
+{
+	void __iomem *regs = thrd->dmac->pinfo->base;
+	u32 val;
+
+	if (is_manager(thrd))
+		val = readl(regs + DS) & 0xf;
+	else
+		val = readl(regs + CS(thrd->id)) & 0xf;
+
+	switch (val) {
+	case DS_ST_STOP:
+		return PL330_STATE_STOPPED;
+	case DS_ST_EXEC:
+		return PL330_STATE_EXECUTING;
+	case DS_ST_CMISS:
+		return PL330_STATE_CACHEMISS;
+	case DS_ST_UPDTPC:
+		return PL330_STATE_UPDTPC;
+	case DS_ST_WFE:
+		return PL330_STATE_WFE;
+	case DS_ST_FAULT:
+		return PL330_STATE_FAULTING;
+	case DS_ST_ATBRR:
+		if (is_manager(thrd))
+			return PL330_STATE_INVALID;
+		else
+			return PL330_STATE_ATBARRIER;
+	case DS_ST_QBUSY:
+		if (is_manager(thrd))
+			return PL330_STATE_INVALID;
+		else
+			return PL330_STATE_QUEUEBUSY;
+	case DS_ST_WFP:
+		if (is_manager(thrd))
+			return PL330_STATE_INVALID;
+		else
+			return PL330_STATE_WFP;
+	case DS_ST_KILL:
+		if (is_manager(thrd))
+			return PL330_STATE_INVALID;
+		else
+			return PL330_STATE_KILLING;
+	case DS_ST_CMPLT:
+		if (is_manager(thrd))
+			return PL330_STATE_INVALID;
+		else
+			return PL330_STATE_COMPLETING;
+	case DS_ST_FLTCMP:
+		if (is_manager(thrd))
+			return PL330_STATE_INVALID;
+		else
+			return PL330_STATE_FAULT_COMPLETING;
+	default:
+		return PL330_STATE_INVALID;
+	}
+}
+
+/* If the request 'req' of thread 'thrd' is currently active */
+static inline bool _req_active(struct pl330_thread *thrd,
+		struct _pl330_req *req)
+{
+	void __iomem *regs = thrd->dmac->pinfo->base;
+	u32 buf = req->mc_bus, pc = readl(regs + CPC(thrd->id));
+
+	if (IS_FREE(req))
+		return false;
+
+	return (pc >= buf && pc <= buf + req->mc_len) ? true : false;
+}
+
+/* Returns 0 if the thread is inactive, ID of active req + 1 otherwise */
+static inline unsigned _thrd_active(struct pl330_thread *thrd)
+{
+	if (_req_active(thrd, &thrd->req[0]))
+		return 1; /* First req active */
+
+	if (_req_active(thrd, &thrd->req[1]))
+		return 2; /* Second req active */
+
+	return 0;
+}
+
+static void _stop(struct pl330_thread *thrd)
+{
+	void __iomem *regs = thrd->dmac->pinfo->base;
+	u8 insn[6] = {0, 0, 0, 0, 0, 0};
+
+	if (_state(thrd) == PL330_STATE_FAULT_COMPLETING)
+		UNTIL(thrd, PL330_STATE_FAULTING | PL330_STATE_KILLING);
+
+	/* Return if nothing needs to be done */
+	if (_state(thrd) == PL330_STATE_COMPLETING
+		  || _state(thrd) == PL330_STATE_KILLING
+		  || _state(thrd) == PL330_STATE_STOPPED)
+		return;
+
+	_emit_KILL(0, insn);
+
+	/* Stop generating interrupts for SEV */
+	writel(readl(regs + INTEN) & ~(1 << thrd->ev), regs + INTEN);
+
+	_execute_DBGINSN(thrd, insn, is_manager(thrd));
+}
+
+/* Start doing req 'idx' of thread 'thrd' */
+static bool _trigger(struct pl330_thread *thrd)
+{
+	void __iomem *regs = thrd->dmac->pinfo->base;
+	struct _pl330_req *req;
+	struct pl330_req *r;
+	struct _arg_GO go;
+	unsigned ns;
+	u8 insn[6] = {0, 0, 0, 0, 0, 0};
+
+	/* Return if already ACTIVE */
+	if (_state(thrd) != PL330_STATE_STOPPED)
+		return true;
+
+	if (!IS_FREE(&thrd->req[1 - thrd->lstenq]))
+		req = &thrd->req[1 - thrd->lstenq];
+	else if (!IS_FREE(&thrd->req[thrd->lstenq]))
+		req = &thrd->req[thrd->lstenq];
+	else
+		req = NULL;
+
+	/* Return if no request */
+	if (!req || !req->r)
+		return true;
+
+	r = req->r;
+
+	if (r->cfg)
+		ns = r->cfg->nonsecure ? 1 : 0;
+	else if (readl(regs + CS(thrd->id)) & CS_CNS)
+		ns = 1;
+	else
+		ns = 0;
+
+	/* See 'Abort Sources' point-4 at Page 2-25 */
+	if (_manager_ns(thrd) && !ns)
+		dev_info(thrd->dmac->pinfo->dev, "%s:%d Recipe for ABORT!\n",
+			__func__, __LINE__);
+
+	go.chan = thrd->id;
+	go.addr = req->mc_bus;
+	go.ns = ns;
+	_emit_GO(0, insn, &go);
+
+	/* Set to generate interrupts for SEV */
+	writel(readl(regs + INTEN) | (1 << thrd->ev), regs + INTEN);
+
+	/* Only manager can execute GO */
+	_execute_DBGINSN(thrd, insn, true);
+
+	return true;
+}
+
+static bool _start(struct pl330_thread *thrd)
+{
+	switch (_state(thrd)) {
+	case PL330_STATE_FAULT_COMPLETING:
+		UNTIL(thrd, PL330_STATE_FAULTING | PL330_STATE_KILLING);
+
+		if (_state(thrd) == PL330_STATE_KILLING)
+			UNTIL(thrd, PL330_STATE_STOPPED)
+
+	case PL330_STATE_FAULTING:
+		_stop(thrd);
+
+	case PL330_STATE_KILLING:
+	case PL330_STATE_COMPLETING:
+		UNTIL(thrd, PL330_STATE_STOPPED)
+
+	case PL330_STATE_STOPPED:
+		return _trigger(thrd);
+
+	case PL330_STATE_WFP:
+	case PL330_STATE_QUEUEBUSY:
+	case PL330_STATE_ATBARRIER:
+	case PL330_STATE_UPDTPC:
+	case PL330_STATE_CACHEMISS:
+	case PL330_STATE_EXECUTING:
+		return true;
+
+	case PL330_STATE_WFE: /* For RESUME, nothing yet */
+	default:
+		return false;
+	}
+}
+
+static inline int _ldst_memtomem(unsigned dry_run, u8 buf[],
+		const struct _xfer_spec *pxs, int cyc)
+{
+	int off = 0;
+
+	while (cyc--) {
+		off += _emit_LD(dry_run, &buf[off], ALWAYS);
+		off += _emit_RMB(dry_run, &buf[off]);
+		off += _emit_ST(dry_run, &buf[off], ALWAYS);
+		off += _emit_WMB(dry_run, &buf[off]);
+	}
+
+	return off;
+}
+
+static inline int _ldst_devtomem(unsigned dry_run, u8 buf[],
+		const struct _xfer_spec *pxs, int cyc)
+{
+	int off = 0;
+
+	while (cyc--) {
+		off += _emit_WFP(dry_run, &buf[off], SINGLE, pxs->r->peri);
+		off += _emit_LDP(dry_run, &buf[off], SINGLE, pxs->r->peri);
+		off += _emit_ST(dry_run, &buf[off], ALWAYS);
+		off += _emit_FLUSHP(dry_run, &buf[off], pxs->r->peri);
+	}
+
+	return off;
+}
+
+static inline int _ldst_memtodev(unsigned dry_run, u8 buf[],
+		const struct _xfer_spec *pxs, int cyc)
+{
+	int off = 0;
+
+	while (cyc--) {
+		off += _emit_WFP(dry_run, &buf[off], SINGLE, pxs->r->peri);
+		off += _emit_LD(dry_run, &buf[off], ALWAYS);
+		off += _emit_STP(dry_run, &buf[off], SINGLE, pxs->r->peri);
+		off += _emit_FLUSHP(dry_run, &buf[off], pxs->r->peri);
+	}
+
+	return off;
+}
+
+static int _bursts(unsigned dry_run, u8 buf[],
+		const struct _xfer_spec *pxs, int cyc)
+{
+	int off = 0;
+
+	switch (pxs->r->rqtype) {
+	case MEMTODEV:
+		off += _ldst_memtodev(dry_run, &buf[off], pxs, cyc);
+		break;
+	case DEVTOMEM:
+		off += _ldst_devtomem(dry_run, &buf[off], pxs, cyc);
+		break;
+	case MEMTOMEM:
+		off += _ldst_memtomem(dry_run, &buf[off], pxs, cyc);
+		break;
+	default:
+		off += 0x40000000; /* Scare off the Client */
+		break;
+	}
+
+	return off;
+}
+
+/* Returns bytes consumed and updates bursts */
+static inline int _loop(unsigned dry_run, u8 buf[],
+		unsigned long *bursts, const struct _xfer_spec *pxs)
+{
+	int cyc, cycmax, szlp, szlpend, szbrst, off;
+	unsigned lcnt0, lcnt1, ljmp0, ljmp1;
+	struct _arg_LPEND lpend;
+
+	/* Max iterations possibile in DMALP is 256 */
+	if (*bursts >= 256*256) {
+		lcnt1 = 256;
+		lcnt0 = 256;
+		cyc = *bursts / lcnt1 / lcnt0;
+	} else if (*bursts > 256) {
+		lcnt1 = 256;
+		lcnt0 = *bursts / lcnt1;
+		cyc = 1;
+	} else {
+		lcnt1 = *bursts;
+		lcnt0 = 0;
+		cyc = 1;
+	}
+
+	szlp = _emit_LP(1, buf, 0, 0);
+	szbrst = _bursts(1, buf, pxs, 1);
+
+	lpend.cond = ALWAYS;
+	lpend.forever = false;
+	lpend.loop = 0;
+	lpend.bjump = 0;
+	szlpend = _emit_LPEND(1, buf, &lpend);
+
+	if (lcnt0) {
+		szlp *= 2;
+		szlpend *= 2;
+	}
+
+	/*
+	 * Max bursts that we can unroll due to limit on the
+	 * size of backward jump that can be encoded in DMALPEND
+	 * which is 8-bits and hence 255
+	 */
+	cycmax = (255 - (szlp + szlpend)) / szbrst;
+
+	cyc = (cycmax < cyc) ? cycmax : cyc;
+
+	off = 0;
+
+	if (lcnt0) {
+		off += _emit_LP(dry_run, &buf[off], 0, lcnt0);
+		ljmp0 = off;
+	}
+
+	off += _emit_LP(dry_run, &buf[off], 1, lcnt1);
+	ljmp1 = off;
+
+	off += _bursts(dry_run, &buf[off], pxs, cyc);
+
+	lpend.cond = ALWAYS;
+	lpend.forever = false;
+	lpend.loop = 1;
+	lpend.bjump = off - ljmp1;
+	off += _emit_LPEND(dry_run, &buf[off], &lpend);
+
+	if (lcnt0) {
+		lpend.cond = ALWAYS;
+		lpend.forever = false;
+		lpend.loop = 0;
+		lpend.bjump = off - ljmp0;
+		off += _emit_LPEND(dry_run, &buf[off], &lpend);
+	}
+
+	*bursts = lcnt1 * cyc;
+	if (lcnt0)
+		*bursts *= lcnt0;
+
+	return off;
+}
+
+static inline int _setup_loops(unsigned dry_run, u8 buf[],
+		const struct _xfer_spec *pxs)
+{
+	struct pl330_xfer *x = pxs->x;
+	u32 ccr = pxs->ccr;
+	unsigned long c, bursts = BYTE_TO_BURST(x->bytes, ccr);
+	int off = 0;
+
+	while (bursts) {
+		c = bursts;
+		off += _loop(dry_run, &buf[off], &c, pxs);
+		bursts -= c;
+	}
+
+	return off;
+}
+
+static inline int _setup_xfer(unsigned dry_run, u8 buf[],
+		const struct _xfer_spec *pxs)
+{
+	struct pl330_xfer *x = pxs->x;
+	int off = 0;
+
+	/* DMAMOV SAR, x->src_addr */
+	off += _emit_MOV(dry_run, &buf[off], SAR, x->src_addr);
+	/* DMAMOV DAR, x->dst_addr */
+	off += _emit_MOV(dry_run, &buf[off], DAR, x->dst_addr);
+
+	/* Setup Loop(s) */
+	off += _setup_loops(dry_run, &buf[off], pxs);
+
+	return off;
+}
+
+/*
+ * A req is a sequence of one or more xfer units.
+ * Returns the number of bytes taken to setup the MC for the req.
+ */
+static int _setup_req(unsigned dry_run, struct pl330_thread *thrd,
+		unsigned index, struct _xfer_spec *pxs)
+{
+	struct _pl330_req *req = &thrd->req[index];
+	struct pl330_xfer *x;
+	u8 *buf = req->mc_cpu;
+	int off = 0;
+
+	PL330_DBGMC_START(req->mc_bus);
+
+	/* DMAMOV CCR, ccr */
+	off += _emit_MOV(dry_run, &buf[off], CCR, pxs->ccr);
+
+	x = pxs->r->x;
+	do {
+		/* Error if xfer length is not aligned at burst size */
+		if (x->bytes % (BRST_SIZE(pxs->ccr) * BRST_LEN(pxs->ccr)))
+			return -EINVAL;
+
+		pxs->x = x;
+		off += _setup_xfer(dry_run, &buf[off], pxs);
+
+		x = x->next;
+	} while (x);
+
+	/* DMASEV peripheral/event */
+	off += _emit_SEV(dry_run, &buf[off], thrd->ev);
+	/* DMAEND */
+	off += _emit_END(dry_run, &buf[off]);
+
+	return off;
+}
+
+static inline u32 _prepare_ccr(const struct pl330_reqcfg *rqc)
+{
+	u32 ccr = 0;
+
+	if (rqc->src_inc)
+		ccr |= CC_SRCINC;
+
+	if (rqc->dst_inc)
+		ccr |= CC_DSTINC;
+
+	/* We set same protection levels for Src and DST for now */
+	if (rqc->privileged)
+		ccr |= CC_SRCPRI | CC_DSTPRI;
+	if (rqc->nonsecure)
+		ccr |= CC_SRCNS | CC_DSTNS;
+	if (rqc->insnaccess)
+		ccr |= CC_SRCIA | CC_DSTIA;
+
+	ccr |= (((rqc->brst_len - 1) & 0xf) << CC_SRCBRSTLEN_SHFT);
+	ccr |= (((rqc->brst_len - 1) & 0xf) << CC_DSTBRSTLEN_SHFT);
+
+	ccr |= (rqc->brst_size << CC_SRCBRSTSIZE_SHFT);
+	ccr |= (rqc->brst_size << CC_DSTBRSTSIZE_SHFT);
+
+	ccr |= (rqc->dcctl << CC_SRCCCTRL_SHFT);
+	ccr |= (rqc->scctl << CC_DSTCCTRL_SHFT);
+
+	ccr |= (rqc->swap << CC_SWAP_SHFT);
+
+	return ccr;
+}
+
+static inline bool _is_valid(u32 ccr)
+{
+	enum pl330_dstcachectrl dcctl;
+	enum pl330_srccachectrl scctl;
+
+	dcctl = (ccr >> CC_DSTCCTRL_SHFT) & CC_DRCCCTRL_MASK;
+	scctl = (ccr >> CC_SRCCCTRL_SHFT) & CC_SRCCCTRL_MASK;
+
+	if (dcctl == DINVALID1 || dcctl == DINVALID2
+			|| scctl == SINVALID1 || scctl == SINVALID2)
+		return false;
+	else
+		return true;
+}
+
+/*
+ * Submit a list of xfers after which the client wants notification.
+ * Client is not notified after each xfer unit, just once after all
+ * xfer units are done or some error occurs.
+ */
+int pl330_submit_req(void *ch_id, struct pl330_req *r)
+{
+	struct pl330_thread *thrd = ch_id;
+	struct pl330_dmac *pl330;
+	struct pl330_info *pi;
+	struct _xfer_spec xs;
+	unsigned long flags;
+	void __iomem *regs;
+	unsigned idx;
+	u32 ccr;
+	int ret = 0;
+
+	/* No Req or Unacquired Channel or DMAC */
+	if (!r || !thrd || thrd->free)
+		return -EINVAL;
+
+	pl330 = thrd->dmac;
+	pi = pl330->pinfo;
+	regs = pi->base;
+
+	if (pl330->state == DYING
+		|| pl330->dmac_tbd.reset_chan & (1 << thrd->id)) {
+		dev_info(thrd->dmac->pinfo->dev, "%s:%d\n",
+			__func__, __LINE__);
+		return -EAGAIN;
+	}
+
+	/* If request for non-existing peripheral */
+	if (r->rqtype != MEMTOMEM && r->peri >= pi->pcfg.num_peri) {
+		dev_info(thrd->dmac->pinfo->dev,
+				"%s:%d Invalid peripheral(%u)!\n",
+				__func__, __LINE__, r->peri);
+		return -EINVAL;
+	}
+
+	spin_lock_irqsave(&pl330->lock, flags);
+
+	if (_queue_full(thrd)) {
+		ret = -EAGAIN;
+		goto xfer_exit;
+	}
+
+	/* Prefer Secure Channel */
+	if (!_manager_ns(thrd))
+		r->cfg->nonsecure = 0;
+	else
+		r->cfg->nonsecure = 1;
+
+	/* Use last settings, if not provided */
+	if (r->cfg)
+		ccr = _prepare_ccr(r->cfg);
+	else
+		ccr = readl(regs + CC(thrd->id));
+
+	/* If this req doesn't have valid xfer settings */
+	if (!_is_valid(ccr)) {
+		ret = -EINVAL;
+		dev_info(thrd->dmac->pinfo->dev, "%s:%d Invalid CCR(%x)!\n",
+			__func__, __LINE__, ccr);
+		goto xfer_exit;
+	}
+
+	idx = IS_FREE(&thrd->req[0]) ? 0 : 1;
+
+	xs.ccr = ccr;
+	xs.r = r;
+
+	/* First dry run to check if req is acceptable */
+	ret = _setup_req(1, thrd, idx, &xs);
+	if (ret < 0)
+		goto xfer_exit;
+
+	if (ret > pi->mcbufsz / 2) {
+		dev_info(thrd->dmac->pinfo->dev,
+			"%s:%d Trying increasing mcbufsz\n",
+				__func__, __LINE__);
+		ret = -ENOMEM;
+		goto xfer_exit;
+	}
+
+	/* Hook the request */
+	thrd->lstenq = idx;
+	thrd->req[idx].mc_len = _setup_req(0, thrd, idx, &xs);
+	thrd->req[idx].r = r;
+
+	ret = 0;
+
+xfer_exit:
+	spin_unlock_irqrestore(&pl330->lock, flags);
+
+	return ret;
+}
+EXPORT_SYMBOL(pl330_submit_req);
+
+static void pl330_dotask(unsigned long data)
+{
+	struct pl330_dmac *pl330 = (struct pl330_dmac *) data;
+	struct pl330_info *pi = pl330->pinfo;
+	unsigned long flags;
+	int i;
+
+	spin_lock_irqsave(&pl330->lock, flags);
+
+	/* The DMAC itself gone nuts */
+	if (pl330->dmac_tbd.reset_dmac) {
+		pl330->state = DYING;
+		/* Reset the manager too */
+		pl330->dmac_tbd.reset_mngr = true;
+		/* Clear the reset flag */
+		pl330->dmac_tbd.reset_dmac = false;
+	}
+
+	if (pl330->dmac_tbd.reset_mngr) {
+		_stop(pl330->manager);
+		/* Reset all channels */
+		pl330->dmac_tbd.reset_chan = (1 << pi->pcfg.num_chan) - 1;
+		/* Clear the reset flag */
+		pl330->dmac_tbd.reset_mngr = false;
+	}
+
+	for (i = 0; i < pi->pcfg.num_chan; i++) {
+
+		if (pl330->dmac_tbd.reset_chan & (1 << i)) {
+			struct pl330_thread *thrd = &pl330->channels[i];
+			void __iomem *regs = pi->base;
+			enum pl330_op_err err;
+
+			_stop(thrd);
+
+			if (readl(regs + FSC) & (1 << thrd->id))
+				err = PL330_ERR_FAIL;
+			else
+				err = PL330_ERR_ABORT;
+
+			spin_unlock_irqrestore(&pl330->lock, flags);
+
+			_callback(thrd->req[1 - thrd->lstenq].r, err);
+			_callback(thrd->req[thrd->lstenq].r, err);
+
+			spin_lock_irqsave(&pl330->lock, flags);
+
+			thrd->req[0].r = NULL;
+			thrd->req[1].r = NULL;
+			MARK_FREE(&thrd->req[0]);
+			MARK_FREE(&thrd->req[1]);
+
+			/* Clear the reset flag */
+			pl330->dmac_tbd.reset_chan &= ~(1 << i);
+		}
+	}
+
+	spin_unlock_irqrestore(&pl330->lock, flags);
+
+	return;
+}
+
+/* Returns 1 if state was updated, 0 otherwise */
+int pl330_update(const struct pl330_info *pi)
+{
+	struct _pl330_req *rqdone;
+	struct pl330_dmac *pl330;
+	unsigned long flags;
+	void __iomem *regs;
+	u32 val;
+	int id, ev, ret = 0;
+
+	if (!pi || !pi->pl330_data)
+		return 0;
+
+	regs = pi->base;
+	pl330 = pi->pl330_data;
+
+	spin_lock_irqsave(&pl330->lock, flags);
+
+	val = readl(regs + FSM) & 0x1;
+	if (val)
+		pl330->dmac_tbd.reset_mngr = true;
+	else
+		pl330->dmac_tbd.reset_mngr = false;
+
+	val = readl(regs + FSC) & ((1 << pi->pcfg.num_chan) - 1);
+	pl330->dmac_tbd.reset_chan |= val;
+	if (val) {
+		int i = 0;
+		while (i < pi->pcfg.num_chan) {
+			if (val & (1 << i)) {
+				dev_info(pi->dev,
+					"Reset Channel-%d\t CS-%x FTC-%x\n",
+						i, readl(regs + CS(i)),
+						readl(regs + FTC(i)));
+				_stop(&pl330->channels[i]);
+			}
+			i++;
+		}
+	}
+
+	/* Check which event happened i.e, thread notified */
+	val = readl(regs + ES);
+	if (pi->pcfg.num_events < 32
+			&& val & ~((1 << pi->pcfg.num_events) - 1)) {
+		pl330->dmac_tbd.reset_dmac = true;
+		dev_err(pi->dev, "%s:%d Unexpected!\n", __func__, __LINE__);
+		ret = 1;
+		goto updt_exit;
+	}
+
+	for (ev = 0; ev < pi->pcfg.num_events; ev++) {
+		if (val & (1 << ev)) { /* Event occured */
+			struct pl330_thread *thrd;
+			u32 inten = readl(regs + INTEN);
+			int active;
+
+			/* Clear the event */
+			if (inten & (1 << ev))
+				writel(1 << ev, regs + INTCLR);
+
+			ret = 1;
+
+			id = pl330->events[ev];
+
+			thrd = &pl330->channels[id];
+
+			active = _thrd_active(thrd);
+			if (!active) /* Aborted */
+				continue;
+
+			active -= 1;
+
+			rqdone = &thrd->req[active];
+			MARK_FREE(rqdone);
+
+			/* Get going again ASAP */
+			_start(thrd);
+
+			/* For now, just make a list of callbacks to be done */
+			list_add_tail(&rqdone->rqd, &pl330->req_done);
+		}
+	}
+
+	/* Now that we are in no hurry, do the callbacks */
+	while (!list_empty(&pl330->req_done)) {
+		rqdone = container_of(pl330->req_done.next,
+					struct _pl330_req, rqd);
+
+		list_del_init(&rqdone->rqd);
+
+		spin_unlock_irqrestore(&pl330->lock, flags);
+		_callback(rqdone->r, PL330_ERR_NONE);
+		spin_lock_irqsave(&pl330->lock, flags);
+	}
+
+updt_exit:
+	spin_unlock_irqrestore(&pl330->lock, flags);
+
+	if (pl330->dmac_tbd.reset_dmac
+			|| pl330->dmac_tbd.reset_mngr
+			|| pl330->dmac_tbd.reset_chan) {
+		ret = 1;
+		tasklet_schedule(&pl330->tasks);
+	}
+
+	return ret;
+}
+EXPORT_SYMBOL(pl330_update);
+
+int pl330_chan_ctrl(void *ch_id, enum pl330_chan_op op)
+{
+	struct pl330_thread *thrd = ch_id;
+	struct pl330_dmac *pl330;
+	unsigned long flags;
+	int ret = 0, active;
+
+	if (!thrd || thrd->free || thrd->dmac->state == DYING)
+		return -EINVAL;
+
+	pl330 = thrd->dmac;
+
+	spin_lock_irqsave(&pl330->lock, flags);
+
+	switch (op) {
+	case PL330_OP_FLUSH:
+		/* Make sure the channel is stopped */
+		_stop(thrd);
+
+		thrd->req[0].r = NULL;
+		thrd->req[1].r = NULL;
+		MARK_FREE(&thrd->req[0]);
+		MARK_FREE(&thrd->req[1]);
+		break;
+
+	case PL330_OP_ABORT:
+		active = _thrd_active(thrd);
+
+		/* Make sure the channel is stopped */
+		_stop(thrd);
+
+		/* ABORT is only for the active req */
+		if (!active)
+			break;
+
+		active--;
+
+		thrd->req[active].r = NULL;
+		MARK_FREE(&thrd->req[active]);
+
+		/* Start the next */
+	case PL330_OP_START:
+		if (!_start(thrd))
+			ret = -EIO;
+		break;
+
+	default:
+		ret = -EINVAL;
+	}
+
+	spin_unlock_irqrestore(&pl330->lock, flags);
+	return ret;
+}
+EXPORT_SYMBOL(pl330_chan_ctrl);
+
+int pl330_chan_status(void *ch_id, struct pl330_chanstatus *pstatus)
+{
+	struct pl330_thread *thrd = ch_id;
+	struct pl330_dmac *pl330;
+	struct pl330_info *pi;
+	void __iomem *regs;
+	int active;
+	u32 val;
+
+	if (!pstatus || !thrd || thrd->free)
+		return -EINVAL;
+
+	pl330 = thrd->dmac;
+	pi = pl330->pinfo;
+	regs = pi->base;
+
+	/* The client should remove the DMAC and add again */
+	if (pl330->state == DYING)
+		pstatus->dmac_halted = true;
+	else
+		pstatus->dmac_halted = false;
+
+	val = readl(regs + FSC);
+	if (val & (1 << thrd->id))
+		pstatus->faulting = true;
+	else
+		pstatus->faulting = false;
+
+	active = _thrd_active(thrd);
+
+	if (!active) {
+		/* Indicate that the thread is not running */
+		pstatus->top_req = NULL;
+		pstatus->wait_req = NULL;
+	} else {
+		active--;
+		pstatus->top_req = thrd->req[active].r;
+		pstatus->wait_req = !IS_FREE(&thrd->req[1 - active])
+					? thrd->req[1 - active].r : NULL;
+	}
+
+	pstatus->src_addr = readl(regs + SA(thrd->id));
+	pstatus->dst_addr = readl(regs + DA(thrd->id));
+
+	return 0;
+}
+EXPORT_SYMBOL(pl330_chan_status);
+
+/* Reserve an event */
+static inline int _alloc_event(struct pl330_thread *thrd)
+{
+	struct pl330_dmac *pl330 = thrd->dmac;
+	struct pl330_info *pi = pl330->pinfo;
+	int ev;
+
+	for (ev = 0; ev < pi->pcfg.num_events; ev++)
+		if (pl330->events[ev] == -1) {
+			pl330->events[ev] = thrd->id;
+			return ev;
+		}
+
+	return -1;
+}
+
+/* Upon success, returns IdentityToken for the
+ * allocated channel, NULL otherwise.
+ */
+void *pl330_request_channel(const struct pl330_info *pi)
+{
+	struct pl330_thread *thrd = NULL;
+	struct pl330_dmac *pl330;
+	unsigned long flags;
+	int chans, i;
+
+	if (!pi || !pi->pl330_data)
+		return NULL;
+
+	pl330 = pi->pl330_data;
+
+	if (pl330->state == DYING)
+		return NULL;
+
+	chans = pi->pcfg.num_chan;
+
+	spin_lock_irqsave(&pl330->lock, flags);
+
+	for (i = 0; i < chans; i++) {
+		thrd = &pl330->channels[i];
+		if (thrd->free) {
+			thrd->ev = _alloc_event(thrd);
+			if (thrd->ev >= 0) {
+				thrd->free = false;
+				thrd->lstenq = 1;
+				thrd->req[0].r = NULL;
+				MARK_FREE(&thrd->req[0]);
+				thrd->req[1].r = NULL;
+				MARK_FREE(&thrd->req[1]);
+				break;
+			}
+		}
+		thrd = NULL;
+	}
+
+	spin_unlock_irqrestore(&pl330->lock, flags);
+
+	return thrd;
+}
+EXPORT_SYMBOL(pl330_request_channel);
+
+/* Release an event */
+static inline void _free_event(struct pl330_thread *thrd, int ev)
+{
+	struct pl330_dmac *pl330 = thrd->dmac;
+	struct pl330_info *pi = pl330->pinfo;
+
+	/* If the event is valid and was held by the thread */
+	if (ev >= 0 && ev < pi->pcfg.num_events
+			&& pl330->events[ev] == thrd->id)
+		pl330->events[ev] = -1;
+}
+
+void pl330_release_channel(void *ch_id)
+{
+	struct pl330_thread *thrd = ch_id;
+	struct pl330_dmac *pl330;
+	unsigned long flags;
+
+	if (!thrd || thrd->free)
+		return;
+
+	_stop(thrd);
+
+	_callback(thrd->req[1 - thrd->lstenq].r, PL330_ERR_ABORT);
+	_callback(thrd->req[thrd->lstenq].r, PL330_ERR_ABORT);
+
+	pl330 = thrd->dmac;
+
+	spin_lock_irqsave(&pl330->lock, flags);
+	_free_event(thrd, thrd->ev);
+	thrd->free = true;
+	spin_unlock_irqrestore(&pl330->lock, flags);
+}
+EXPORT_SYMBOL(pl330_release_channel);
+
+/* Initialize the structure for PL330 configuration, that can be used
+ * by the client driver the make best use of the DMAC
+ */
+static void read_dmac_config(struct pl330_info *pi)
+{
+	void __iomem *regs = pi->base;
+	u32 val;
+
+	val = readl(regs + CRD) >> CRD_DATA_WIDTH_SHIFT;
+	val &= CRD_DATA_WIDTH_MASK;
+	pi->pcfg.data_bus_width = 8 * (1 << val);
+
+	val = readl(regs + CRD) >> CRD_DATA_BUFF_SHIFT;
+	val &= CRD_DATA_BUFF_MASK;
+	pi->pcfg.data_buf_dep = val + 1;
+
+	val = readl(regs + CR0) >> CR0_NUM_CHANS_SHIFT;
+	val &= CR0_NUM_CHANS_MASK;
+	val += 1;
+	pi->pcfg.num_chan = val;
+
+	val = readl(regs + CR0);
+	if (val & CR0_PERIPH_REQ_SET) {
+		val = (val >> CR0_NUM_PERIPH_SHIFT) & CR0_NUM_PERIPH_MASK;
+		val += 1;
+		pi->pcfg.num_peri = val;
+		pi->pcfg.peri_ns = readl(regs + CR4);
+	} else {
+		pi->pcfg.num_peri = 0;
+	}
+
+	val = readl(regs + CR0);
+	if (val & CR0_BOOT_MAN_NS)
+		pi->pcfg.mode |= DMAC_MODE_NS;
+	else
+		pi->pcfg.mode &= ~DMAC_MODE_NS;
+
+	val = readl(regs + CR0) >> CR0_NUM_EVENTS_SHIFT;
+	val &= CR0_NUM_EVENTS_MASK;
+	val += 1;
+	pi->pcfg.num_events = val;
+
+	pi->pcfg.irq_ns = readl(regs + CR3);
+
+	pi->pcfg.periph_id = get_id(pi, PERIPH_ID);
+	pi->pcfg.pcell_id = get_id(pi, PCELL_ID);
+}
+
+static inline void _reset_thread(struct pl330_thread *thrd)
+{
+	struct pl330_dmac *pl330 = thrd->dmac;
+	struct pl330_info *pi = pl330->pinfo;
+
+	thrd->req[0].mc_cpu = pl330->mcode_cpu
+				+ (thrd->id * pi->mcbufsz);
+	thrd->req[0].mc_bus = pl330->mcode_bus
+				+ (thrd->id * pi->mcbufsz);
+	thrd->req[0].r = NULL;
+	MARK_FREE(&thrd->req[0]);
+
+	thrd->req[1].mc_cpu = thrd->req[0].mc_cpu
+				+ pi->mcbufsz / 2;
+	thrd->req[1].mc_bus = thrd->req[0].mc_bus
+				+ pi->mcbufsz / 2;
+	thrd->req[1].r = NULL;
+	MARK_FREE(&thrd->req[1]);
+}
+
+static int dmac_alloc_threads(struct pl330_dmac *pl330)
+{
+	struct pl330_info *pi = pl330->pinfo;
+	int chans = pi->pcfg.num_chan;
+	struct pl330_thread *thrd;
+	int i;
+
+	/* Allocate 1 Manager and 'chans' Channel threads */
+	pl330->channels = kzalloc((1 + chans) * sizeof(*thrd),
+					GFP_KERNEL);
+	if (!pl330->channels)
+		return -ENOMEM;
+
+	/* Init Channel threads */
+	for (i = 0; i < chans; i++) {
+		thrd = &pl330->channels[i];
+		thrd->id = i;
+		thrd->dmac = pl330;
+		_reset_thread(thrd);
+		thrd->free = true;
+	}
+
+	/* MANAGER is indexed at the end */
+	thrd = &pl330->channels[chans];
+	thrd->id = chans;
+	thrd->dmac = pl330;
+	thrd->free = false;
+	pl330->manager = thrd;
+
+	return 0;
+}
+
+static int dmac_alloc_resources(struct pl330_dmac *pl330)
+{
+	struct pl330_info *pi = pl330->pinfo;
+	int chans = pi->pcfg.num_chan;
+	int ret;
+
+	/*
+	 * Alloc MicroCode buffer for 'chans' Channel threads.
+	 * A channel's buffer offset is (Channel_Id * MCODE_BUFF_PERCHAN)
+	 */
+	pl330->mcode_cpu = dma_alloc_coherent(pi->dev,
+				chans * pi->mcbufsz,
+				&pl330->mcode_bus, GFP_KERNEL);
+	if (!pl330->mcode_cpu) {
+		dev_err(pi->dev, "%s:%d Can't allocate memory!\n",
+			__func__, __LINE__);
+		return -ENOMEM;
+	}
+
+	ret = dmac_alloc_threads(pl330);
+	if (ret) {
+		dev_err(pi->dev, "%s:%d Can't to create channels for DMAC!\n",
+			__func__, __LINE__);
+		dma_free_coherent(pi->dev,
+				chans * pi->mcbufsz,
+				pl330->mcode_cpu, pl330->mcode_bus);
+		return ret;
+	}
+
+	return 0;
+}
+
+int pl330_add(struct pl330_info *pi)
+{
+	struct pl330_dmac *pl330;
+	void __iomem *regs;
+	int i, ret;
+
+	if (!pi || !pi->dev)
+		return -EINVAL;
+
+	/* If already added */
+	if (pi->pl330_data)
+		return -EINVAL;
+
+	/*
+	 * If the SoC can perform reset on the DMAC, then do it
+	 * before reading its configuration.
+	 */
+	if (pi->dmac_reset)
+		pi->dmac_reset(pi);
+
+	regs = pi->base;
+
+	/* Check if we can handle this DMAC */
+	if (get_id(pi, PERIPH_ID) != PERIPH_ID_VAL
+	   || get_id(pi, PCELL_ID) != PCELL_ID_VAL) {
+		dev_err(pi->dev, "PERIPH_ID 0x%x, PCELL_ID 0x%x !\n",
+			readl(regs + PERIPH_ID), readl(regs + PCELL_ID));
+		return -EINVAL;
+	}
+
+	/* Read the configuration of the DMAC */
+	read_dmac_config(pi);
+
+	if (pi->pcfg.num_events == 0) {
+		dev_err(pi->dev, "%s:%d Can't work without events!\n",
+			__func__, __LINE__);
+		return -EINVAL;
+	}
+
+	pl330 = kzalloc(sizeof(*pl330), GFP_KERNEL);
+	if (!pl330) {
+		dev_err(pi->dev, "%s:%d Can't allocate memory!\n",
+			__func__, __LINE__);
+		return -ENOMEM;
+	}
+
+	/* Assign the info structure and private data */
+	pl330->pinfo = pi;
+	pi->pl330_data = pl330;
+
+	spin_lock_init(&pl330->lock);
+
+	INIT_LIST_HEAD(&pl330->req_done);
+
+	/* Use default MC buffer size if not provided */
+	if (!pi->mcbufsz)
+		pi->mcbufsz = MCODE_BUFF_PER_REQ * 2;
+
+	/* Mark all events as free */
+	for (i = 0; i < pi->pcfg.num_events; i++)
+		pl330->events[i] = -1;
+
+	/* Allocate resources needed by the DMAC */
+	ret = dmac_alloc_resources(pl330);
+	if (ret) {
+		dev_err(pi->dev, "Unable to create channels for DMAC\n");
+		kfree(pl330);
+		return ret;
+	}
+
+	tasklet_init(&pl330->tasks, pl330_dotask, (unsigned long) pl330);
+
+	pl330->state = INIT;
+
+	return 0;
+}
+EXPORT_SYMBOL(pl330_add);
+
+static int dmac_free_threads(struct pl330_dmac *pl330)
+{
+	struct pl330_info *pi = pl330->pinfo;
+	int chans = pi->pcfg.num_chan;
+	struct pl330_thread *thrd;
+	int i;
+
+	/* Release Channel threads */
+	for (i = 0; i < chans; i++) {
+		thrd = &pl330->channels[i];
+		pl330_release_channel((void *)thrd);
+	}
+
+	/* Free memory */
+	kfree(pl330->channels);
+
+	return 0;
+}
+
+static void dmac_free_resources(struct pl330_dmac *pl330)
+{
+	struct pl330_info *pi = pl330->pinfo;
+	int chans = pi->pcfg.num_chan;
+
+	dmac_free_threads(pl330);
+
+	dma_free_coherent(pi->dev, chans * pi->mcbufsz,
+				pl330->mcode_cpu, pl330->mcode_bus);
+}
+
+void pl330_del(struct pl330_info *pi)
+{
+	struct pl330_dmac *pl330;
+
+	if (!pi || !pi->pl330_data)
+		return;
+
+	pl330 = pi->pl330_data;
+
+	pl330->state = UNINIT;
+
+	tasklet_kill(&pl330->tasks);
+
+	/* Free DMAC resources */
+	dmac_free_resources(pl330);
+
+	kfree(pl330);
+	pi->pl330_data = NULL;
+}
+EXPORT_SYMBOL(pl330_del);

arch/arm/common/vic.c

@@ -266,13 +266,53 @@ static int vic_set_wake(unsigned int irq, unsigned int on)
 #endif /* CONFIG_PM */
 
 static struct irq_chip vic_chip = {
-	.name	= "VIC",
-	.ack	= vic_ack_irq,
-	.mask	= vic_mask_irq,
-	.unmask	= vic_unmask_irq,
-	.set_wake = vic_set_wake,
+	.name		= "VIC",
+	.ack		= vic_ack_irq,
+	.mask		= vic_mask_irq,
+	.unmask		= vic_unmask_irq,
+	.set_wake	= vic_set_wake,
 };
 
+static void __init vic_disable(void __iomem *base)
+{
+	writel(0, base + VIC_INT_SELECT);
+	writel(0, base + VIC_INT_ENABLE);
+	writel(~0, base + VIC_INT_ENABLE_CLEAR);
+	writel(0, base + VIC_IRQ_STATUS);
+	writel(0, base + VIC_ITCR);
+	writel(~0, base + VIC_INT_SOFT_CLEAR);
+}
+
+static void __init vic_clear_interrupts(void __iomem *base)
+{
+	unsigned int i;
+
+	writel(0, base + VIC_PL190_VECT_ADDR);
+	for (i = 0; i < 19; i++) {
+		unsigned int value;
+
+		value = readl(base + VIC_PL190_VECT_ADDR);
+		writel(value, base + VIC_PL190_VECT_ADDR);
+	}
+}
+
+static void __init vic_set_irq_sources(void __iomem *base,
+				unsigned int irq_start, u32 vic_sources)
+{
+	unsigned int i;
+
+	for (i = 0; i < 32; i++) {
+		if (vic_sources & (1 << i)) {
+			unsigned int irq = irq_start + i;
+
+			set_irq_chip(irq, &vic_chip);
+			set_irq_chip_data(irq, base);
+			set_irq_handler(irq, handle_level_irq);
+			set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
+		}
+	}
+}
+
 /*
  * The PL190 cell from ARM has been modified by ST to handle 64 interrupts.
  * The original cell has 32 interrupts, while the modified one has 64,
@@ -287,13 +327,7 @@ static void __init vic_init_st(void __iomem *base, unsigned int irq_start,
 	int vic_2nd_block = ((unsigned long)base & ~PAGE_MASK) != 0;
 
 	/* Disable all interrupts initially. */
-
-	writel(0, base + VIC_INT_SELECT);
-	writel(0, base + VIC_INT_ENABLE);
-	writel(~0, base + VIC_INT_ENABLE_CLEAR);
-	writel(0, base + VIC_IRQ_STATUS);
-	writel(0, base + VIC_ITCR);
-	writel(~0, base + VIC_INT_SOFT_CLEAR);
+	vic_disable(base);
 
 	/*
 	 * Make sure we clear all existing interrupts. The vector registers
@@ -302,13 +336,8 @@ static void __init vic_init_st(void __iomem *base, unsigned int irq_start,
 	 * the second base address, which is 0x20 in the page
 	 */
 	if (vic_2nd_block) {
-		writel(0, base + VIC_PL190_VECT_ADDR);
-		for (i = 0; i < 19; i++) {
-			unsigned int value;
+		vic_clear_interrupts(base);
 
-			value = readl(base + VIC_PL190_VECT_ADDR);
-			writel(value, base + VIC_PL190_VECT_ADDR);
-		}
 		/* ST has 16 vectors as well, but we don't enable them by now */
 		for (i = 0; i < 16; i++) {
 			void __iomem *reg = base + VIC_VECT_CNTL0 + (i * 4);
@@ -318,16 +347,7 @@ static void __init vic_init_st(void __iomem *base, unsigned int irq_start,
 		writel(32, base + VIC_PL190_DEF_VECT_ADDR);
 	}
 
-	for (i = 0; i < 32; i++) {
-		if (vic_sources & (1 << i)) {
-			unsigned int irq = irq_start + i;
-
-			set_irq_chip(irq, &vic_chip);
-			set_irq_chip_data(irq, base);
-			set_irq_handler(irq, handle_level_irq);
-			set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
-		}
-	}
+	vic_set_irq_sources(base, irq_start, vic_sources);
 }
 
 /**
@@ -365,37 +385,14 @@ void __init vic_init(void __iomem *base, unsigned int irq_start,
 	}
 
 	/* Disable all interrupts initially. */
+	vic_disable(base);
 
-	writel(0, base + VIC_INT_SELECT);
-	writel(0, base + VIC_INT_ENABLE);
-	writel(~0, base + VIC_INT_ENABLE_CLEAR);
-	writel(0, base + VIC_IRQ_STATUS);
-	writel(0, base + VIC_ITCR);
-	writel(~0, base + VIC_INT_SOFT_CLEAR);
-
-	/*
-	 * Make sure we clear all existing interrupts
-	 */
-	writel(0, base + VIC_PL190_VECT_ADDR);
-	for (i = 0; i < 19; i++) {
-		unsigned int value;
-
-		value = readl(base + VIC_PL190_VECT_ADDR);
-		writel(value, base + VIC_PL190_VECT_ADDR);
-	}
+	/* Make sure we clear all existing interrupts */
+	vic_clear_interrupts(base);
 
 	vic_init2(base);
 
-	for (i = 0; i < 32; i++) {
-		if (vic_sources & (1 << i)) {
-			unsigned int irq = irq_start + i;
-
-			set_irq_chip(irq, &vic_chip);
-			set_irq_chip_data(irq, base);
-			set_irq_handler(irq, handle_level_irq);
-			set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
-		}
-	}
+	vic_set_irq_sources(base, irq_start, vic_sources);
 
 	vic_pm_register(base, irq_start, resume_sources);
 }

arch/arm/configs/spear300_defconfig

@@ -0,0 +1,773 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.32
+# Tue Mar 23 14:36:23 2010
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=17
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_MODVERSIONS=y
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+CONFIG_MMU=y
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5PC1XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_BCMRING is not set
+CONFIG_PLAT_SPEAR=y
+CONFIG_ARCH_SPEAR3XX=y
+# CONFIG_ARCH_SPEAR6XX is not set
+CONFIG_MACH_SPEAR300=y
+# CONFIG_MACH_SPEAR310 is not set
+# CONFIG_MACH_SPEAR320 is not set
+CONFIG_BOARD_SPEAR300_EVB=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_LEGACY=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+CONFIG_ARM_L1_CACHE_SHIFT=5
+CONFIG_ARM_VIC=y
+CONFIG_ARM_VIC_NR=2
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+CONFIG_ARM_AMBA=y
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=100
+# CONFIG_AEABI is not set
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0
+CONFIG_ZBOOT_ROM_BSS=0
+CONFIG_CMDLINE=""
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+# CONFIG_FPE_NWFPE is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+CONFIG_BINFMT_MISC=y
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+# CONFIG_NET is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=16384
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+CONFIG_INPUT_FF_MEMLESS=y
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_AMBAKMI is not set
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_AMBA_PL010 is not set
+CONFIG_SERIAL_AMBA_PL011=y
+CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+CONFIG_RAW_DRIVER=y
+CONFIG_MAX_RAW_DEVS=8192
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+CONFIG_GPIO_PL061=y
+
+#
+# I2C GPIO expanders:
+#
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+
+#
+# AC97 GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+# CONFIG_EXT2_FS_POSIX_ACL is not set
+CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+CONFIG_EXT3_FS_SECURITY=y
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+# CONFIG_INOTIFY is not set
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+CONFIG_AUTOFS4_FS=m
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="utf8"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+CONFIG_NLS_ASCII=m
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+CONFIG_DEBUG_SPINLOCK=y
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+CONFIG_DEBUG_SPINLOCK_SLEEP=y
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+CONFIG_RCU_CPU_STALL_DETECTOR=y
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_BOOT_TRACER is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+# CONFIG_CRC32 is not set
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y

arch/arm/configs/spear310_defconfig

@@ -0,0 +1,775 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.32
+# Tue Mar 23 14:37:01 2010
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=17
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_MODVERSIONS=y
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+CONFIG_MMU=y
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5PC1XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_BCMRING is not set
+CONFIG_PLAT_SPEAR=y
+CONFIG_ARCH_SPEAR3XX=y
+# CONFIG_ARCH_SPEAR6XX is not set
+# CONFIG_MACH_SPEAR300 is not set
+CONFIG_MACH_SPEAR310=y
+# CONFIG_MACH_SPEAR320 is not set
+# CONFIG_BOARD_SPEAR300_EVB is not set
+CONFIG_BOARD_SPEAR310_EVB=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_LEGACY=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+CONFIG_ARM_L1_CACHE_SHIFT=5
+CONFIG_ARM_VIC=y
+CONFIG_ARM_VIC_NR=2
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+CONFIG_ARM_AMBA=y
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=100
+# CONFIG_AEABI is not set
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0
+CONFIG_ZBOOT_ROM_BSS=0
+CONFIG_CMDLINE=""
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+# CONFIG_FPE_NWFPE is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+CONFIG_BINFMT_MISC=y
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+# CONFIG_NET is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=16384
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_MG_DISK is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+CONFIG_INPUT_FF_MEMLESS=y
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_AMBAKMI is not set
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_AMBA_PL010 is not set
+CONFIG_SERIAL_AMBA_PL011=y
+CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+CONFIG_RAW_DRIVER=y
+CONFIG_MAX_RAW_DEVS=8192
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+CONFIG_GPIO_PL061=y
+
+#
+# I2C GPIO expanders:
+#
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+
+#
+# AC97 GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+# CONFIG_EXT2_FS_POSIX_ACL is not set
+CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+CONFIG_EXT3_FS_SECURITY=y
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+# CONFIG_INOTIFY is not set
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+CONFIG_AUTOFS4_FS=m
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="utf8"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+CONFIG_NLS_ASCII=m
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+CONFIG_DEBUG_SPINLOCK=y
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+CONFIG_DEBUG_SPINLOCK_SLEEP=y
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+CONFIG_RCU_CPU_STALL_DETECTOR=y
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_BOOT_TRACER is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+# CONFIG_CRC32 is not set
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y

arch/arm/configs/spear320_defconfig

@@ -0,0 +1,775 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.32
+# Tue Mar 23 14:37:12 2010
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=17
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_MODVERSIONS=y
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+CONFIG_MMU=y
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5PC1XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_BCMRING is not set
+CONFIG_PLAT_SPEAR=y
+CONFIG_ARCH_SPEAR3XX=y
+# CONFIG_ARCH_SPEAR6XX is not set
+# CONFIG_MACH_SPEAR300 is not set
+# CONFIG_MACH_SPEAR310 is not set
+CONFIG_MACH_SPEAR320=y
+# CONFIG_BOARD_SPEAR300_EVB is not set
+CONFIG_BOARD_SPEAR320_EVB=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_LEGACY=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+CONFIG_ARM_L1_CACHE_SHIFT=5
+CONFIG_ARM_VIC=y
+CONFIG_ARM_VIC_NR=2
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+CONFIG_ARM_AMBA=y
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=100
+# CONFIG_AEABI is not set
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0
+CONFIG_ZBOOT_ROM_BSS=0
+CONFIG_CMDLINE=""
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+# CONFIG_FPE_NWFPE is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+CONFIG_BINFMT_MISC=y
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+# CONFIG_NET is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=16384
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_MG_DISK is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+CONFIG_INPUT_FF_MEMLESS=y
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_AMBAKMI is not set
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_AMBA_PL010 is not set
+CONFIG_SERIAL_AMBA_PL011=y
+CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+CONFIG_RAW_DRIVER=y
+CONFIG_MAX_RAW_DEVS=8192
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+CONFIG_GPIO_PL061=y
+
+#
+# I2C GPIO expanders:
+#
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+
+#
+# AC97 GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+# CONFIG_EXT2_FS_POSIX_ACL is not set
+CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+CONFIG_EXT3_FS_SECURITY=y
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+# CONFIG_INOTIFY is not set
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+CONFIG_AUTOFS4_FS=m
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="utf8"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+CONFIG_NLS_ASCII=m
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+CONFIG_DEBUG_SPINLOCK=y
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+CONFIG_DEBUG_SPINLOCK_SLEEP=y
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+CONFIG_RCU_CPU_STALL_DETECTOR=y
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_BOOT_TRACER is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+# CONFIG_CRC32 is not set
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y

arch/arm/configs/spear600_defconfig

@@ -0,0 +1,760 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.32
+# Tue Mar 23 14:37:26 2010
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=17
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_MODVERSIONS=y
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+CONFIG_MMU=y
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5PC1XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_BCMRING is not set
+CONFIG_PLAT_SPEAR=y
+# CONFIG_ARCH_SPEAR3XX is not set
+CONFIG_ARCH_SPEAR6XX=y
+# CONFIG_MACH_SPEAR300 is not set
+# CONFIG_MACH_SPEAR310 is not set
+# CONFIG_MACH_SPEAR320 is not set
+# CONFIG_BOARD_SPEAR300_EVB is not set
+CONFIG_MACH_SPEAR600=y
+CONFIG_BOARD_SPEAR600_EVB=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_LEGACY=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+CONFIG_ARM_L1_CACHE_SHIFT=5
+CONFIG_ARM_VIC=y
+CONFIG_ARM_VIC_NR=2
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+CONFIG_ARM_AMBA=y
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=100
+# CONFIG_AEABI is not set
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0
+CONFIG_ZBOOT_ROM_BSS=0
+CONFIG_CMDLINE=""
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+# CONFIG_FPE_NWFPE is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+CONFIG_BINFMT_MISC=y
+# CONFIG_ARTHUR is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+# CONFIG_NET is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=16384
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+CONFIG_INPUT_FF_MEMLESS=y
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_AMBAKMI is not set
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_AMBA_PL010 is not set
+CONFIG_SERIAL_AMBA_PL011=y
+CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_R3964 is not set
+CONFIG_RAW_DRIVER=y
+CONFIG_MAX_RAW_DEVS=8192
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+CONFIG_GPIO_PL061=y
+
+#
+# I2C GPIO expanders:
+#
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+
+#
+# AC97 GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+# CONFIG_EXT2_FS_POSIX_ACL is not set
+CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+CONFIG_EXT3_FS_SECURITY=y
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+# CONFIG_INOTIFY is not set
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+CONFIG_AUTOFS4_FS=m
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="utf8"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+CONFIG_NLS_ASCII=m
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+CONFIG_DEBUG_SPINLOCK=y
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+CONFIG_DEBUG_SPINLOCK_SLEEP=y
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+CONFIG_RCU_CPU_STALL_DETECTOR=y
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_BOOT_TRACER is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+# CONFIG_CRC32 is not set
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y

arch/arm/include/asm/hardware/arm_timer.h

@@ -1,21 +1,30 @@
 #ifndef __ASM_ARM_HARDWARE_ARM_TIMER_H
 #define __ASM_ARM_HARDWARE_ARM_TIMER_H
 
-#define TIMER_LOAD	0x00
-#define TIMER_VALUE	0x04
-#define TIMER_CTRL	0x08
-#define TIMER_CTRL_ONESHOT	(1 << 0)
-#define TIMER_CTRL_32BIT	(1 << 1)
-#define TIMER_CTRL_DIV1		(0 << 2)
-#define TIMER_CTRL_DIV16	(1 << 2)
-#define TIMER_CTRL_DIV256	(2 << 2)
-#define TIMER_CTRL_IE		(1 << 5)	/* Interrupt Enable (versatile only) */
-#define TIMER_CTRL_PERIODIC	(1 << 6)
-#define TIMER_CTRL_ENABLE	(1 << 7)
+/*
+ * ARM timer implementation, found in Integrator, Versatile and Realview
+ * platforms.  Not all platforms support all registers and bits in these
+ * registers, so we mark them with A for Integrator AP, C for Integrator
+ * CP, V for Versatile and R for Realview.
+ *
+ * Integrator AP has 16-bit timers, Integrator CP, Versatile and Realview
+ * can have 16-bit or 32-bit selectable via a bit in the control register.
+ */
+#define TIMER_LOAD	0x00			/* ACVR rw */
+#define TIMER_VALUE	0x04			/* ACVR ro */
+#define TIMER_CTRL	0x08			/* ACVR rw */
+#define TIMER_CTRL_ONESHOT	(1 << 0)	/*  CVR */
+#define TIMER_CTRL_32BIT	(1 << 1)	/*  CVR */
+#define TIMER_CTRL_DIV1		(0 << 2)	/* ACVR */
+#define TIMER_CTRL_DIV16	(1 << 2)	/* ACVR */
+#define TIMER_CTRL_DIV256	(2 << 2)	/* ACVR */
+#define TIMER_CTRL_IE		(1 << 5)	/*   VR */
+#define TIMER_CTRL_PERIODIC	(1 << 6)	/* ACVR */
+#define TIMER_CTRL_ENABLE	(1 << 7)	/* ACVR */
 
-#define TIMER_INTCLR	0x0c
-#define TIMER_RIS	0x10
-#define TIMER_MIS	0x14
-#define TIMER_BGLOAD	0x18
+#define TIMER_INTCLR	0x0c			/* ACVR wo */
+#define TIMER_RIS	0x10			/*  CVR ro */
+#define TIMER_MIS	0x14			/*  CVR ro */
+#define TIMER_BGLOAD	0x18			/*  CVR rw */
 
 #endif

arch/arm/include/asm/hardware/cache-l2x0.h

@@ -21,6 +21,9 @@
 #define __ASM_ARM_HARDWARE_L2X0_H
 
 #define L2X0_CACHE_ID			0x000
+#define   L2X0_CACHE_ID_PART_MASK	(0xf << 6)
+#define   L2X0_CACHE_ID_PART_L210	(1 << 6)
+#define   L2X0_CACHE_ID_PART_L310	(3 << 6)
 #define L2X0_CACHE_TYPE			0x004
 #define L2X0_CTRL			0x100
 #define L2X0_AUX_CTRL			0x104

arch/arm/include/asm/hardware/icst.h

@@ -0,0 +1,59 @@
+/*
+ *  arch/arm/include/asm/hardware/icst.h
+ *
+ *  Copyright (C) 2003 Deep Blue Solutions, Ltd, All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  Support functions for calculating clocks/divisors for the ICST
+ *  clock generators.  See http://www.icst.com/ for more information
+ *  on these devices.
+ */
+#ifndef ASMARM_HARDWARE_ICST_H
+#define ASMARM_HARDWARE_ICST_H
+
+struct icst_params {
+	unsigned long	ref;
+	unsigned long	vco_max;	/* inclusive */
+	unsigned long	vco_min;	/* exclusive */
+	unsigned short	vd_min;		/* inclusive */
+	unsigned short	vd_max;		/* inclusive */
+	unsigned char	rd_min;		/* inclusive */
+	unsigned char	rd_max;		/* inclusive */
+	const unsigned char *s2div;	/* chip specific s2div array */
+	const unsigned char *idx2s;	/* chip specific idx2s array */
+};
+
+struct icst_vco {
+	unsigned short	v;
+	unsigned char	r;
+	unsigned char	s;
+};
+
+unsigned long icst_hz(const struct icst_params *p, struct icst_vco vco);
+struct icst_vco icst_hz_to_vco(const struct icst_params *p, unsigned long freq);
+
+/*
+ * ICST307 VCO frequency must be between 6MHz and 200MHz (3.3 or 5V).
+ * This frequency is pre-output divider.
+ */
+#define ICST307_VCO_MIN	6000000
+#define ICST307_VCO_MAX	200000000
+
+extern const unsigned char icst307_s2div[];
+extern const unsigned char icst307_idx2s[];
+
+/*
+ * ICST525 VCO frequency must be between 10MHz and 200MHz (3V) or 320MHz (5V).
+ * This frequency is pre-output divider.
+ */
+#define ICST525_VCO_MIN		10000000
+#define ICST525_VCO_MAX_3V	200000000
+#define ICST525_VCO_MAX_5V	320000000
+
+extern const unsigned char icst525_s2div[];
+extern const unsigned char icst525_idx2s[];
+
+#endif

arch/arm/include/asm/hardware/icst307.h

@@ -1,38 +0,0 @@
-/*
- *  arch/arm/include/asm/hardware/icst307.h
- *
- *  Copyright (C) 2003 Deep Blue Solutions, Ltd, All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  Support functions for calculating clocks/divisors for the ICS307
- *  clock generators.  See http://www.icst.com/ for more information
- *  on these devices.
- *
- *  This file is similar to the icst525.h file
- */
-#ifndef ASMARM_HARDWARE_ICST307_H
-#define ASMARM_HARDWARE_ICST307_H
-
-struct icst307_params {
-	unsigned long	ref;
-	unsigned long	vco_max;	/* inclusive */
-	unsigned short	vd_min;		/* inclusive */
-	unsigned short	vd_max;		/* inclusive */
-	unsigned char	rd_min;		/* inclusive */
-	unsigned char	rd_max;		/* inclusive */
-};
-
-struct icst307_vco {
-	unsigned short	v;
-	unsigned char	r;
-	unsigned char	s;
-};
-
-unsigned long icst307_khz(const struct icst307_params *p, struct icst307_vco vco);
-struct icst307_vco icst307_khz_to_vco(const struct icst307_params *p, unsigned long freq);
-struct icst307_vco icst307_ps_to_vco(const struct icst307_params *p, unsigned long period);
-
-#endif

arch/arm/include/asm/hardware/icst525.h

@@ -1,36 +0,0 @@
-/*
- *  arch/arm/include/asm/hardware/icst525.h
- *
- *  Copyright (C) 2003 Deep Blue Solutions, Ltd, All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  Support functions for calculating clocks/divisors for the ICST525
- *  clock generators.  See http://www.icst.com/ for more information
- *  on these devices.
- */
-#ifndef ASMARM_HARDWARE_ICST525_H
-#define ASMARM_HARDWARE_ICST525_H
-
-struct icst525_params {
-	unsigned long	ref;
-	unsigned long	vco_max;	/* inclusive */
-	unsigned short	vd_min;		/* inclusive */
-	unsigned short	vd_max;		/* inclusive */
-	unsigned char	rd_min;		/* inclusive */
-	unsigned char	rd_max;		/* inclusive */
-};
-
-struct icst525_vco {
-	unsigned short	v;
-	unsigned char	r;
-	unsigned char	s;
-};
-
-unsigned long icst525_khz(const struct icst525_params *p, struct icst525_vco vco);
-struct icst525_vco icst525_khz_to_vco(const struct icst525_params *p, unsigned long freq);
-struct icst525_vco icst525_ps_to_vco(const struct icst525_params *p, unsigned long period);
-
-#endif

arch/arm/include/asm/hardware/pl330.h

@@ -0,0 +1,217 @@
+/* linux/include/asm/hardware/pl330.h
+ *
+ * Copyright (C) 2010 Samsung Electronics Co. Ltd.
+ *	Jaswinder Singh <jassi.brar@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __PL330_CORE_H
+#define __PL330_CORE_H
+
+#define PL330_MAX_CHAN		8
+#define PL330_MAX_IRQS		32
+#define PL330_MAX_PERI		32
+
+enum pl330_srccachectrl {
+	SCCTRL0 = 0, /* Noncacheable and nonbufferable */
+	SCCTRL1, /* Bufferable only */
+	SCCTRL2, /* Cacheable, but do not allocate */
+	SCCTRL3, /* Cacheable and bufferable, but do not allocate */
+	SINVALID1,
+	SINVALID2,
+	SCCTRL6, /* Cacheable write-through, allocate on reads only */
+	SCCTRL7, /* Cacheable write-back, allocate on reads only */
+};
+
+enum pl330_dstcachectrl {
+	DCCTRL0 = 0, /* Noncacheable and nonbufferable */
+	DCCTRL1, /* Bufferable only */
+	DCCTRL2, /* Cacheable, but do not allocate */
+	DCCTRL3, /* Cacheable and bufferable, but do not allocate */
+	DINVALID1 = 8,
+	DINVALID2,
+	DCCTRL6, /* Cacheable write-through, allocate on writes only */
+	DCCTRL7, /* Cacheable write-back, allocate on writes only */
+};
+
+/* Populated by the PL330 core driver for DMA API driver's info */
+struct pl330_config {
+	u32	periph_id;
+	u32	pcell_id;
+#define DMAC_MODE_NS	(1 << 0)
+	unsigned int	mode;
+	unsigned int	data_bus_width:10; /* In number of bits */
+	unsigned int	data_buf_dep:10;
+	unsigned int	num_chan:4;
+	unsigned int	num_peri:6;
+	u32		peri_ns;
+	unsigned int	num_events:6;
+	u32		irq_ns;
+};
+
+/* Handle to the DMAC provided to the PL330 core */
+struct pl330_info {
+	/* Owning device */
+	struct device *dev;
+	/* Size of MicroCode buffers for each channel. */
+	unsigned mcbufsz;
+	/* ioremap'ed address of PL330 registers. */
+	void __iomem	*base;
+	/* Client can freely use it. */
+	void	*client_data;
+	/* PL330 core data, Client must not touch it. */
+	void	*pl330_data;
+	/* Populated by the PL330 core driver during pl330_add */
+	struct pl330_config	pcfg;
+	/*
+	 * If the DMAC has some reset mechanism, then the
+	 * client may want to provide pointer to the method.
+	 */
+	void (*dmac_reset)(struct pl330_info *pi);
+};
+
+enum pl330_byteswap {
+	SWAP_NO = 0,
+	SWAP_2,
+	SWAP_4,
+	SWAP_8,
+	SWAP_16,
+};
+
+/**
+ * Request Configuration.
+ * The PL330 core does not modify this and uses the last
+ * working configuration if the request doesn't provide any.
+ *
+ * The Client may want to provide this info only for the
+ * first request and a request with new settings.
+ */
+struct pl330_reqcfg {
+	/* Address Incrementing */
+	unsigned dst_inc:1;
+	unsigned src_inc:1;
+
+	/*
+	 * For now, the SRC & DST protection levels
+	 * and burst size/length are assumed same.
+	 */
+	bool nonsecure;
+	bool privileged;
+	bool insnaccess;
+	unsigned brst_len:5;
+	unsigned brst_size:3; /* in power of 2 */
+
+	enum pl330_dstcachectrl dcctl;
+	enum pl330_srccachectrl scctl;
+	enum pl330_byteswap swap;
+};
+
+/*
+ * One cycle of DMAC operation.
+ * There may be more than one xfer in a request.
+ */
+struct pl330_xfer {
+	u32 src_addr;
+	u32 dst_addr;
+	/* Size to xfer */
+	u32 bytes;
+	/*
+	 * Pointer to next xfer in the list.
+	 * The last xfer in the req must point to NULL.
+	 */
+	struct pl330_xfer *next;
+};
+
+/* The xfer callbacks are made with one of these arguments. */
+enum pl330_op_err {
+	/* The all xfers in the request were success. */
+	PL330_ERR_NONE,
+	/* If req aborted due to global error. */
+	PL330_ERR_ABORT,
+	/* If req failed due to problem with Channel. */
+	PL330_ERR_FAIL,
+};
+
+enum pl330_reqtype {
+	MEMTOMEM,
+	MEMTODEV,
+	DEVTOMEM,
+	DEVTODEV,
+};
+
+/* A request defining Scatter-Gather List ending with NULL xfer. */
+struct pl330_req {
+	enum pl330_reqtype rqtype;
+	/* Index of peripheral for the xfer. */
+	unsigned peri:5;
+	/* Unique token for this xfer, set by the client. */
+	void *token;
+	/* Callback to be called after xfer. */
+	void (*xfer_cb)(void *token, enum pl330_op_err err);
+	/* If NULL, req will be done at last set parameters. */
+	struct pl330_reqcfg *cfg;
+	/* Pointer to first xfer in the request. */
+	struct pl330_xfer *x;
+};
+
+/*
+ * To know the status of the channel and DMAC, the client
+ * provides a pointer to this structure. The PL330 core
+ * fills it with current information.
+ */
+struct pl330_chanstatus {
+	/*
+	 * If the DMAC engine halted due to some error,
+	 * the client should remove-add DMAC.
+	 */
+	bool dmac_halted;
+	/*
+	 * If channel is halted due to some error,
+	 * the client should ABORT/FLUSH and START the channel.
+	 */
+	bool faulting;
+	/* Location of last load */
+	u32 src_addr;
+	/* Location of last store */
+	u32 dst_addr;
+	/*
+	 * Pointer to the currently active req, NULL if channel is
+	 * inactive, even though the requests may be present.
+	 */
+	struct pl330_req *top_req;
+	/* Pointer to req waiting second in the queue if any. */
+	struct pl330_req *wait_req;
+};
+
+enum pl330_chan_op {
+	/* Start the channel */
+	PL330_OP_START,
+	/* Abort the active xfer */
+	PL330_OP_ABORT,
+	/* Stop xfer and flush queue */
+	PL330_OP_FLUSH,
+};
+
+extern int pl330_add(struct pl330_info *);
+extern void pl330_del(struct pl330_info *pi);
+extern int pl330_update(const struct pl330_info *pi);
+extern void pl330_release_channel(void *ch_id);
+extern void *pl330_request_channel(const struct pl330_info *pi);
+extern int pl330_chan_status(void *ch_id, struct pl330_chanstatus *pstatus);
+extern int pl330_chan_ctrl(void *ch_id, enum pl330_chan_op op);
+extern int pl330_submit_req(void *ch_id, struct pl330_req *r);
+
+#endif	/* __PL330_CORE_H */

arch/arm/include/asm/hardware/sp810.h

@@ -0,0 +1,59 @@
+/*
+ * arch/arm/include/asm/hardware/sp810.h
+ *
+ * ARM PrimeXsys System Controller SP810 header file
+ *
+ * Copyright (C) 2009 ST Microelectronics
+ * Viresh Kumar<viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARM_SP810_H
+#define __ASM_ARM_SP810_H
+
+#include <linux/io.h>
+
+/* sysctl registers offset */
+#define SCCTRL			0x000
+#define SCSYSSTAT		0x004
+#define SCIMCTRL		0x008
+#define SCIMSTAT		0x00C
+#define SCXTALCTRL		0x010
+#define SCPLLCTRL		0x014
+#define SCPLLFCTRL		0x018
+#define SCPERCTRL0		0x01C
+#define SCPERCTRL1		0x020
+#define SCPEREN			0x024
+#define SCPERDIS		0x028
+#define SCPERCLKEN		0x02C
+#define SCPERSTAT		0x030
+#define SCSYSID0		0xEE0
+#define SCSYSID1		0xEE4
+#define SCSYSID2		0xEE8
+#define SCSYSID3		0xEEC
+#define SCITCR			0xF00
+#define SCITIR0			0xF04
+#define SCITIR1			0xF08
+#define SCITOR			0xF0C
+#define SCCNTCTRL		0xF10
+#define SCCNTDATA		0xF14
+#define SCCNTSTEP		0xF18
+#define SCPERIPHID0		0xFE0
+#define SCPERIPHID1		0xFE4
+#define SCPERIPHID2		0xFE8
+#define SCPERIPHID3		0xFEC
+#define SCPCELLID0		0xFF0
+#define SCPCELLID1		0xFF4
+#define SCPCELLID2		0xFF8
+#define SCPCELLID3		0xFFC
+
+static inline void sysctl_soft_reset(void __iomem *base)
+{
+	/* writing any value to SCSYSSTAT reg will reset system */
+	writel(0, base + SCSYSSTAT);
+}
+
+#endif	/* __ASM_ARM_SP810_H */

arch/arm/include/asm/mach/pci.h

@@ -8,10 +8,16 @@
  * published by the Free Software Foundation.
  */
 
+#ifndef __ASM_MACH_PCI_H
+#define __ASM_MACH_PCI_H
+
 struct pci_sys_data;
 struct pci_bus;
 
 struct hw_pci {
+#ifdef CONFIG_PCI_DOMAINS
+	int		domain;
+#endif
 	struct list_head buses;
 	int		nr_controllers;
 	int		(*setup)(int nr, struct pci_sys_data *);
@@ -26,6 +32,9 @@ struct hw_pci {
  * Per-controller structure
  */
 struct pci_sys_data {
+#ifdef CONFIG_PCI_DOMAINS
+	int		domain;
+#endif
 	struct list_head node;
 	int		busnr;		/* primary bus number			*/
 	u64		mem_offset;	/* bus->cpu memory mapping offset	*/
@@ -70,3 +79,5 @@ extern int pci_v3_setup(int nr, struct pci_sys_data *);
 extern struct pci_bus *pci_v3_scan_bus(int nr, struct pci_sys_data *);
 extern void pci_v3_preinit(void);
 extern void pci_v3_postinit(void);
+
+#endif /* __ASM_MACH_PCI_H */

arch/arm/include/asm/mach/time.h

@@ -38,7 +38,7 @@ struct sys_timer {
 	void			(*init)(void);
 	void			(*suspend)(void);
 	void			(*resume)(void);
-#ifndef CONFIG_GENERIC_TIME
+#ifdef CONFIG_ARCH_USES_GETTIMEOFFSET
 	unsigned long		(*offset)(void);
 #endif
 };

arch/arm/include/asm/pci.h

@@ -4,8 +4,23 @@
 #ifdef __KERNEL__
 #include <asm-generic/pci-dma-compat.h>
 
+#include <asm/mach/pci.h> /* for pci_sys_data */
 #include <mach/hardware.h> /* for PCIBIOS_MIN_* */
 
+#ifdef CONFIG_PCI_DOMAINS
+static inline int pci_domain_nr(struct pci_bus *bus)
+{
+	struct pci_sys_data *root = bus->sysdata;
+
+	return root->domain;
+}
+
+static inline int pci_proc_domain(struct pci_bus *bus)
+{
+	return pci_domain_nr(bus);
+}
+#endif /* CONFIG_PCI_DOMAINS */
+
 #ifdef CONFIG_PCI_HOST_ITE8152
 /* ITE bridge requires setting latency timer to avoid early bus access
    termination by PIC bus mater devices

arch/arm/include/asm/pgtable.h

@@ -314,7 +314,7 @@ static inline pte_t pte_mkspecial(pte_t pte) { return pte; }
 	__pgprot_modify(prot, L_PTE_MT_MASK, L_PTE_MT_UNCACHED)
 #define pgprot_writecombine(prot) \
 	__pgprot_modify(prot, L_PTE_MT_MASK, L_PTE_MT_BUFFERABLE)
-#if __LINUX_ARM_ARCH__ >= 7
+#ifdef CONFIG_ARM_DMA_MEM_BUFFERABLE
 #define pgprot_dmacoherent(prot) \
 	__pgprot_modify(prot, L_PTE_MT_MASK|L_PTE_EXEC, L_PTE_MT_BUFFERABLE)
 #else

arch/arm/include/asm/pmu.h

@@ -12,6 +12,11 @@
 #ifndef __ARM_PMU_H__
 #define __ARM_PMU_H__
 
+enum arm_pmu_type {
+	ARM_PMU_DEVICE_CPU	= 0,
+	ARM_NUM_PMU_DEVICES,
+};
+
 #ifdef CONFIG_CPU_HAS_PMU
 
 struct pmu_irqs {

arch/arm/include/asm/scatterlist.h

@@ -4,24 +4,8 @@
 #include <asm/memory.h>
 #include <asm/types.h>
 
-struct scatterlist {
-#ifdef CONFIG_DEBUG_SG
-	unsigned long	sg_magic;
-#endif
-	unsigned long	page_link;
-	unsigned int	offset;		/* buffer offset		 */
-	dma_addr_t	dma_address;	/* dma address			 */
-	unsigned int	length;		/* length			 */
-};
+#include <asm-generic/scatterlist.h>
 
-/*
- * These macros should be used after a pci_map_sg call has been done
- * to get bus addresses of each of the SG entries and their lengths.
- * You should only work with the number of sg entries pci_map_sg
- * returns, or alternatively stop on the first sg_dma_len(sg) which
- * is 0.
- */
-#define sg_dma_address(sg)      ((sg)->dma_address)
-#define sg_dma_len(sg)          ((sg)->length)
+#undef ARCH_HAS_SG_CHAIN
 
 #endif /* _ASMARM_SCATTERLIST_H */

arch/arm/include/asm/smp.h

@@ -82,7 +82,7 @@ struct secondary_data {
 extern struct secondary_data secondary_data;
 
 extern int __cpu_disable(void);
-extern int mach_cpu_disable(unsigned int cpu);
+extern int platform_cpu_disable(unsigned int cpu);
 
 extern void __cpu_die(unsigned int cpu);
 extern void cpu_die(void);

arch/arm/include/asm/system.h

@@ -137,7 +137,7 @@ extern unsigned int user_debug;
 #define dmb() __asm__ __volatile__ ("" : : : "memory")
 #endif
 
-#if __LINUX_ARM_ARCH__ >= 7 || defined(CONFIG_SMP)
+#if defined(CONFIG_ARM_DMA_MEM_BUFFERABLE) || defined(CONFIG_SMP)
 #define mb()		dmb()
 #define rmb()		dmb()
 #define wmb()		dmb()

arch/arm/kernel/bios32.c

@@ -527,6 +527,9 @@ static void __init pcibios_init_hw(struct hw_pci *hw)
 		if (!sys)
 			panic("PCI: unable to allocate sys data!");
 
+#ifdef CONFIG_PCI_DOMAINS
+		sys->domain  = hw->domain;
+#endif
 		sys->hw      = hw;
 		sys->busnr   = busnr;
 		sys->swizzle = hw->swizzle;

arch/arm/kernel/dma.c

@@ -16,6 +16,8 @@
 #include <linux/spinlock.h>
 #include <linux/errno.h>
 #include <linux/scatterlist.h>
+#include <linux/seq_file.h>
+#include <linux/proc_fs.h>
 
 #include <asm/dma.h>
 
@@ -264,3 +266,37 @@ int get_dma_residue(unsigned int chan)
 	return ret;
 }
 EXPORT_SYMBOL(get_dma_residue);
+
+#ifdef CONFIG_PROC_FS
+static int proc_dma_show(struct seq_file *m, void *v)
+{
+	int i;
+
+	for (i = 0 ; i < MAX_DMA_CHANNELS ; i++) {
+		dma_t *dma = dma_channel(i);
+		if (dma && dma->lock)
+			seq_printf(m, "%2d: %s\n", i, dma->device_id);
+	}
+	return 0;
+}
+
+static int proc_dma_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, proc_dma_show, NULL);
+}
+
+static const struct file_operations proc_dma_operations = {
+	.open		= proc_dma_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+};
+
+static int __init proc_dma_init(void)
+{
+	proc_create("dma", 0, NULL, &proc_dma_operations);
+	return 0;
+}
+
+__initcall(proc_dma_init);
+#endif

arch/arm/kernel/smp.c

@@ -162,7 +162,7 @@ int __cpu_disable(void)
 	struct task_struct *p;
 	int ret;
 
-	ret = mach_cpu_disable(cpu);
+	ret = platform_cpu_disable(cpu);
 	if (ret)
 		return ret;
 

arch/arm/kernel/time.c

@@ -72,12 +72,15 @@ unsigned long profile_pc(struct pt_regs *regs)
 EXPORT_SYMBOL(profile_pc);
 #endif
 
-#ifndef CONFIG_GENERIC_TIME
-static unsigned long dummy_gettimeoffset(void)
+#ifdef CONFIG_ARCH_USES_GETTIMEOFFSET
+u32 arch_gettimeoffset(void)
 {
+	if (system_timer->offset != NULL)
+		return system_timer->offset() * 1000;
+
 	return 0;
 }
-#endif
+#endif /* CONFIG_ARCH_USES_GETTIMEOFFSET */
 
 #ifdef CONFIG_LEDS_TIMER
 static inline void do_leds(void)
@@ -93,63 +96,6 @@ static inline void do_leds(void)
 #define	do_leds()
 #endif
 
-#ifndef CONFIG_GENERIC_TIME
-void do_gettimeofday(struct timeval *tv)
-{
-	unsigned long flags;
-	unsigned long seq;
-	unsigned long usec, sec;
-
-	do {
-		seq = read_seqbegin_irqsave(&xtime_lock, flags);
-		usec = system_timer->offset();
-		sec = xtime.tv_sec;
-		usec += xtime.tv_nsec / 1000;
-	} while (read_seqretry_irqrestore(&xtime_lock, seq, flags));
-
-	/* usec may have gone up a lot: be safe */
-	while (usec >= 1000000) {
-		usec -= 1000000;
-		sec++;
-	}
-
-	tv->tv_sec = sec;
-	tv->tv_usec = usec;
-}
-
-EXPORT_SYMBOL(do_gettimeofday);
-
-int do_settimeofday(struct timespec *tv)
-{
-	time_t wtm_sec, sec = tv->tv_sec;
-	long wtm_nsec, nsec = tv->tv_nsec;
-
-	if ((unsigned long)tv->tv_nsec >= NSEC_PER_SEC)
-		return -EINVAL;
-
-	write_seqlock_irq(&xtime_lock);
-	/*
-	 * This is revolting. We need to set "xtime" correctly. However, the
-	 * value in this location is the value at the most recent update of
-	 * wall time.  Discover what correction gettimeofday() would have
-	 * done, and then undo it!
-	 */
-	nsec -= system_timer->offset() * NSEC_PER_USEC;
-
-	wtm_sec  = wall_to_monotonic.tv_sec + (xtime.tv_sec - sec);
-	wtm_nsec = wall_to_monotonic.tv_nsec + (xtime.tv_nsec - nsec);
-
-	set_normalized_timespec(&xtime, sec, nsec);
-	set_normalized_timespec(&wall_to_monotonic, wtm_sec, wtm_nsec);
-
-	ntp_clear();
-	write_sequnlock_irq(&xtime_lock);
-	clock_was_set();
-	return 0;
-}
-
-EXPORT_SYMBOL(do_settimeofday);
-#endif /* !CONFIG_GENERIC_TIME */
 
 #ifndef CONFIG_GENERIC_CLOCKEVENTS
 /*
@@ -214,10 +160,6 @@ device_initcall(timer_init_sysfs);
 
 void __init time_init(void)
 {
-#ifndef CONFIG_GENERIC_TIME
-	if (system_timer->offset == NULL)
-		system_timer->offset = dummy_gettimeoffset;
-#endif
 	system_timer->init();
 }
 

arch/arm/mach-at91/Kconfig

@@ -97,6 +97,7 @@ config ARCH_AT572D940HF
 
 config ARCH_AT91X40
 	bool "AT91x40"
+	select ARCH_USES_GETTIMEOFFSET
 
 endchoice
 

arch/arm/mach-bcmring/arch.c

@@ -29,6 +29,7 @@
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/mach/time.h>
+#include <asm/pmu.h>
 
 #include <asm/mach/arch.h>
 #include <mach/dma.h>
@@ -85,8 +86,23 @@ static struct platform_device nand_device = {
 	.num_resources	= ARRAY_SIZE(nand_resource),
 };
 
+static struct resource pmu_resource = {
+	.start	= IRQ_PMUIRQ,
+	.end	= IRQ_PMUIRQ,
+	.flags	= IORESOURCE_IRQ,
+};
+
+static struct platform_device pmu_device = {
+	.name		= "arm-pmu",
+	.id		= ARM_PMU_DEVICE_CPU,
+	.resource	= &pmu_resource,
+	.num_resources	= 1,
+};
+
+
 static struct platform_device *devices[] __initdata = {
 	&nand_device,
+	&pmu_device,
 };
 
 /****************************************************************************

arch/arm/mach-clps711x/mm.c

@@ -22,7 +22,6 @@
 #include <linux/kernel.h>
 #include <linux/mm.h>
 #include <linux/init.h>
-#include <linux/bootmem.h>
 
 #include <asm/sizes.h>
 #include <mach/hardware.h>

arch/arm/mach-ep93xx/adssphere.c

@@ -41,7 +41,7 @@ static struct platform_device adssphere_flash = {
 	.resource	= &adssphere_flash_resource,
 };
 
-static struct ep93xx_eth_data adssphere_eth_data = {
+static struct ep93xx_eth_data __initdata adssphere_eth_data = {
 	.phy_id		= 1,
 };
 

arch/arm/mach-ep93xx/clock.c

@@ -96,6 +96,10 @@ static struct clk clk_keypad = {
 	.enable_mask	= EP93XX_SYSCON_KEYTCHCLKDIV_KEN,
 	.set_rate	= set_keytchclk_rate,
 };
+static struct clk clk_spi = {
+	.parent		= &clk_xtali,
+	.rate		= EP93XX_EXT_CLK_RATE,
+};
 static struct clk clk_pwm = {
 	.parent		= &clk_xtali,
 	.rate		= EP93XX_EXT_CLK_RATE,
@@ -186,6 +190,7 @@ static struct clk_lookup clocks[] = {
 	INIT_CK("ep93xx-ohci",		NULL,		&clk_usb_host),
 	INIT_CK("ep93xx-keypad",	NULL,		&clk_keypad),
 	INIT_CK("ep93xx-fb",		NULL,		&clk_video),
+	INIT_CK("ep93xx-spi.0",		NULL,		&clk_spi),
 	INIT_CK(NULL,			"pwm_clk",	&clk_pwm),
 	INIT_CK(NULL,			"m2p0",		&clk_m2p0),
 	INIT_CK(NULL,			"m2p1",		&clk_m2p1),
@@ -473,6 +478,14 @@ static int __init ep93xx_clock_init(void)
 	/* Initialize the pll2 derived clocks */
 	clk_usb_host.rate = clk_pll2.rate / (((value >> 28) & 0xf) + 1);
 
+	/*
+	 * EP93xx SSP clock rate was doubled in version E2. For more information
+	 * see:
+	 *     http://www.cirrus.com/en/pubs/appNote/AN273REV4.pdf
+	 */
+	if (ep93xx_chip_revision() < EP93XX_CHIP_REV_E2)
+		clk_spi.rate /= 2;
+
 	pr_info("PLL1 running at %ld MHz, PLL2 at %ld MHz\n",
 		clk_pll1.rate / 1000000, clk_pll2.rate / 1000000);
 	pr_info("FCLK %ld MHz, HCLK %ld MHz, PCLK %ld MHz\n",

arch/arm/mach-ep93xx/core.c

@@ -31,10 +31,12 @@
 #include <linux/amba/serial.h>
 #include <linux/i2c.h>
 #include <linux/i2c-gpio.h>
+#include <linux/spi/spi.h>
 
 #include <mach/hardware.h>
 #include <mach/fb.h>
 #include <mach/ep93xx_keypad.h>
+#include <mach/ep93xx_spi.h>
 
 #include <asm/mach/map.h>
 #include <asm/mach/time.h>
@@ -222,6 +224,20 @@ void ep93xx_devcfg_set_clear(unsigned int set_bits, unsigned int clear_bits)
 }
 EXPORT_SYMBOL(ep93xx_devcfg_set_clear);
 
+/**
+ * ep93xx_chip_revision() - returns the EP93xx chip revision
+ *
+ * See <mach/platform.h> for more information.
+ */
+unsigned int ep93xx_chip_revision(void)
+{
+	unsigned int v;
+
+	v = __raw_readl(EP93XX_SYSCON_SYSCFG);
+	v &= EP93XX_SYSCON_SYSCFG_REV_MASK;
+	v >>= EP93XX_SYSCON_SYSCFG_REV_SHIFT;
+	return v;
+}
 
 /*************************************************************************
  * EP93xx peripheral handling
@@ -330,6 +346,10 @@ static struct platform_device ep93xx_ohci_device = {
 	.resource	= ep93xx_ohci_resources,
 };
 
+
+/*************************************************************************
+ * EP93xx ethernet peripheral handling
+ *************************************************************************/
 static struct ep93xx_eth_data ep93xx_eth_data;
 
 static struct resource ep93xx_eth_resource[] = {
@@ -354,6 +374,12 @@ static struct platform_device ep93xx_eth_device = {
 	.resource	= ep93xx_eth_resource,
 };
 
+/**
+ * ep93xx_register_eth - Register the built-in ethernet platform device.
+ * @data:	platform specific ethernet configuration (__initdata)
+ * @copy_addr:	flag indicating that the MAC address should be copied
+ *		from the IndAd registers (as programmed by the bootloader)
+ */
 void __init ep93xx_register_eth(struct ep93xx_eth_data *data, int copy_addr)
 {
 	if (copy_addr)
@@ -370,11 +396,19 @@ void __init ep93xx_register_eth(struct ep93xx_eth_data *data, int copy_addr)
 static struct i2c_gpio_platform_data ep93xx_i2c_data;
 
 static struct platform_device ep93xx_i2c_device = {
-	.name			= "i2c-gpio",
-	.id			= 0,
-	.dev.platform_data	= &ep93xx_i2c_data,
+	.name		= "i2c-gpio",
+	.id		= 0,
+	.dev		= {
+		.platform_data	= &ep93xx_i2c_data,
+	},
 };
 
+/**
+ * ep93xx_register_i2c - Register the i2c platform device.
+ * @data:	platform specific i2c-gpio configuration (__initdata)
+ * @devices:	platform specific i2c bus device information (__initdata)
+ * @num:	the number of devices on the i2c bus
+ */
 void __init ep93xx_register_i2c(struct i2c_gpio_platform_data *data,
 				struct i2c_board_info *devices, int num)
 {
@@ -398,17 +432,67 @@ void __init ep93xx_register_i2c(struct i2c_gpio_platform_data *data,
 	platform_device_register(&ep93xx_i2c_device);
 }
 
+/*************************************************************************
+ * EP93xx SPI peripheral handling
+ *************************************************************************/
+static struct ep93xx_spi_info ep93xx_spi_master_data;
+
+static struct resource ep93xx_spi_resources[] = {
+	{
+		.start	= EP93XX_SPI_PHYS_BASE,
+		.end	= EP93XX_SPI_PHYS_BASE + 0x18 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= IRQ_EP93XX_SSP,
+		.end	= IRQ_EP93XX_SSP,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device ep93xx_spi_device = {
+	.name		= "ep93xx-spi",
+	.id		= 0,
+	.dev		= {
+		.platform_data = &ep93xx_spi_master_data,
+	},
+	.num_resources	= ARRAY_SIZE(ep93xx_spi_resources),
+	.resource	= ep93xx_spi_resources,
+};
+
+/**
+ * ep93xx_register_spi() - registers spi platform device
+ * @info: ep93xx board specific spi master info (__initdata)
+ * @devices: SPI devices to register (__initdata)
+ * @num: number of SPI devices to register
+ *
+ * This function registers platform device for the EP93xx SPI controller and
+ * also makes sure that SPI pins are muxed so that I2S is not using those pins.
+ */
+void __init ep93xx_register_spi(struct ep93xx_spi_info *info,
+				struct spi_board_info *devices, int num)
+{
+	/*
+	 * When SPI is used, we need to make sure that I2S is muxed off from
+	 * SPI pins.
+	 */
+	ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_I2SONSSP);
+
+	ep93xx_spi_master_data = *info;
+	spi_register_board_info(devices, num);
+	platform_device_register(&ep93xx_spi_device);
+}
 
 /*************************************************************************
  * EP93xx LEDs
  *************************************************************************/
 static struct gpio_led ep93xx_led_pins[] = {
 	{
-		.name			= "platform:grled",
-		.gpio			= EP93XX_GPIO_LINE_GRLED,
+		.name	= "platform:grled",
+		.gpio	= EP93XX_GPIO_LINE_GRLED,
 	}, {
-		.name			= "platform:rdled",
-		.gpio			= EP93XX_GPIO_LINE_RDLED,
+		.name	= "platform:rdled",
+		.gpio	= EP93XX_GPIO_LINE_RDLED,
 	},
 };
 
@@ -528,7 +612,7 @@ static struct platform_device ep93xx_fb_device = {
 	.name			= "ep93xx-fb",
 	.id			= -1,
 	.dev			= {
-		.platform_data	= &ep93xxfb_data,
+		.platform_data		= &ep93xxfb_data,
 		.coherent_dma_mask	= DMA_BIT_MASK(32),
 		.dma_mask		= &ep93xx_fb_device.dev.coherent_dma_mask,
 	},
@@ -536,6 +620,10 @@ static struct platform_device ep93xx_fb_device = {
 	.resource		= ep93xx_fb_resource,
 };
 
+/**
+ * ep93xx_register_fb - Register the framebuffer platform device.
+ * @data:	platform specific framebuffer configuration (__initdata)
+ */
 void __init ep93xx_register_fb(struct ep93xxfb_mach_info *data)
 {
 	ep93xxfb_data = *data;
@@ -546,6 +634,8 @@ void __init ep93xx_register_fb(struct ep93xxfb_mach_info *data)
 /*************************************************************************
  * EP93xx matrix keypad peripheral handling
  *************************************************************************/
+static struct ep93xx_keypad_platform_data ep93xx_keypad_data;
+
 static struct resource ep93xx_keypad_resource[] = {
 	{
 		.start	= EP93XX_KEY_MATRIX_PHYS_BASE,
@@ -559,15 +649,22 @@ static struct resource ep93xx_keypad_resource[] = {
 };
 
 static struct platform_device ep93xx_keypad_device = {
-	.name			= "ep93xx-keypad",
-	.id			= -1,
-	.num_resources		= ARRAY_SIZE(ep93xx_keypad_resource),
-	.resource		= ep93xx_keypad_resource,
+	.name		= "ep93xx-keypad",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &ep93xx_keypad_data,
+	},
+	.num_resources	= ARRAY_SIZE(ep93xx_keypad_resource),
+	.resource	= ep93xx_keypad_resource,
 };
 
+/**
+ * ep93xx_register_keypad - Register the keypad platform device.
+ * @data:	platform specific keypad configuration (__initdata)
+ */
 void __init ep93xx_register_keypad(struct ep93xx_keypad_platform_data *data)
 {
-	ep93xx_keypad_device.dev.platform_data = data;
+	ep93xx_keypad_data = *data;
 	platform_device_register(&ep93xx_keypad_device);
 }
 

arch/arm/mach-ep93xx/edb93xx.c

@@ -74,7 +74,7 @@ static void __init edb93xx_register_flash(void)
 	}
 }
 
-static struct ep93xx_eth_data edb93xx_eth_data = {
+static struct ep93xx_eth_data __initdata edb93xx_eth_data = {
 	.phy_id		= 1,
 };
 
@@ -82,7 +82,7 @@ static struct ep93xx_eth_data edb93xx_eth_data = {
 /*************************************************************************
  * EDB93xx i2c peripheral handling
  *************************************************************************/
-static struct i2c_gpio_platform_data edb93xx_i2c_gpio_data = {
+static struct i2c_gpio_platform_data __initdata edb93xx_i2c_gpio_data = {
 	.sda_pin		= EP93XX_GPIO_LINE_EEDAT,
 	.sda_is_open_drain	= 0,
 	.scl_pin		= EP93XX_GPIO_LINE_EECLK,

arch/arm/mach-ep93xx/gesbc9312.c

@@ -41,7 +41,7 @@ static struct platform_device gesbc9312_flash = {
 	.resource	= &gesbc9312_flash_resource,
 };
 
-static struct ep93xx_eth_data gesbc9312_eth_data = {
+static struct ep93xx_eth_data __initdata gesbc9312_eth_data = {
 	.phy_id		= 1,
 };
 

arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h

@@ -106,6 +106,7 @@
 
 #define EP93XX_AAC_BASE			EP93XX_APB_IOMEM(0x00080000)
 
+#define EP93XX_SPI_PHYS_BASE		EP93XX_APB_PHYS(0x000a0000)
 #define EP93XX_SPI_BASE			EP93XX_APB_IOMEM(0x000a0000)
 
 #define EP93XX_IRDA_BASE		EP93XX_APB_IOMEM(0x000b0000)

arch/arm/mach-ep93xx/include/mach/platform.h

@@ -6,9 +6,11 @@
 
 struct i2c_gpio_platform_data;
 struct i2c_board_info;
+struct spi_board_info;
 struct platform_device;
 struct ep93xxfb_mach_info;
 struct ep93xx_keypad_platform_data;
+struct ep93xx_spi_info;
 
 struct ep93xx_eth_data
 {
@@ -33,9 +35,19 @@ static inline void ep93xx_devcfg_clear_bits(unsigned int bits)
 	ep93xx_devcfg_set_clear(0x00, bits);
 }
 
+#define EP93XX_CHIP_REV_D0	3
+#define EP93XX_CHIP_REV_D1	4
+#define EP93XX_CHIP_REV_E0	5
+#define EP93XX_CHIP_REV_E1	6
+#define EP93XX_CHIP_REV_E2	7
+
+unsigned int ep93xx_chip_revision(void);
+
 void ep93xx_register_eth(struct ep93xx_eth_data *data, int copy_addr);
 void ep93xx_register_i2c(struct i2c_gpio_platform_data *data,
 			 struct i2c_board_info *devices, int num);
+void ep93xx_register_spi(struct ep93xx_spi_info *info,
+			 struct spi_board_info *devices, int num);
 void ep93xx_register_fb(struct ep93xxfb_mach_info *data);
 void ep93xx_register_pwm(int pwm0, int pwm1);
 int ep93xx_pwm_acquire_gpio(struct platform_device *pdev);

arch/arm/mach-ep93xx/micro9.c

@@ -80,7 +80,7 @@ static void __init micro9_register_flash(void)
 /*************************************************************************
  * Micro9 Ethernet
  *************************************************************************/
-static struct ep93xx_eth_data micro9_eth_data = {
+static struct ep93xx_eth_data __initdata micro9_eth_data = {
 	.phy_id		= 0x1f,
 };
 

arch/arm/mach-ep93xx/simone.c

@@ -49,17 +49,17 @@ static struct platform_device simone_flash = {
 	},
 };
 
-static struct ep93xx_eth_data simone_eth_data = {
+static struct ep93xx_eth_data __initdata simone_eth_data = {
 	.phy_id		= 1,
 };
 
-static struct ep93xxfb_mach_info simone_fb_info = {
+static struct ep93xxfb_mach_info __initdata simone_fb_info = {
 	.num_modes	= EP93XXFB_USE_MODEDB,
 	.bpp		= 16,
 	.flags		= EP93XXFB_USE_SDCSN0 | EP93XXFB_PCLK_FALLING,
 };
 
-static struct i2c_gpio_platform_data simone_i2c_gpio_data = {
+static struct i2c_gpio_platform_data __initdata simone_i2c_gpio_data = {
 	.sda_pin		= EP93XX_GPIO_LINE_EEDAT,
 	.sda_is_open_drain	= 0,
 	.scl_pin		= EP93XX_GPIO_LINE_EECLK,

arch/arm/mach-ep93xx/snappercl15.c

@@ -125,11 +125,11 @@ static struct platform_device snappercl15_nand_device = {
 	.num_resources		= ARRAY_SIZE(snappercl15_nand_resource),
 };
 
-static struct ep93xx_eth_data snappercl15_eth_data = {
+static struct ep93xx_eth_data __initdata snappercl15_eth_data = {
 	.phy_id			= 1,
 };
 
-static struct i2c_gpio_platform_data snappercl15_i2c_gpio_data = {
+static struct i2c_gpio_platform_data __initdata snappercl15_i2c_gpio_data = {
 	.sda_pin		= EP93XX_GPIO_LINE_EEDAT,
 	.sda_is_open_drain	= 0,
 	.scl_pin		= EP93XX_GPIO_LINE_EECLK,
@@ -145,7 +145,7 @@ static struct i2c_board_info __initdata snappercl15_i2c_data[] = {
 	},
 };
 
-static struct ep93xxfb_mach_info snappercl15_fb_info = {
+static struct ep93xxfb_mach_info __initdata snappercl15_fb_info = {
 	.num_modes		= EP93XXFB_USE_MODEDB,
 	.bpp			= 16,
 };

arch/arm/mach-ep93xx/ts72xx.c

@@ -186,7 +186,7 @@ static struct platform_device ts72xx_wdt_device = {
 	.resource	= ts72xx_wdt_resources,
 };
 
-static struct ep93xx_eth_data ts72xx_eth_data = {
+static struct ep93xx_eth_data __initdata ts72xx_eth_data = {
 	.phy_id		= 1,
 };
 

arch/arm/mach-integrator/Kconfig

@@ -11,6 +11,7 @@ config ARCH_INTEGRATOR_AP
 config ARCH_INTEGRATOR_CP
 	bool "Support Integrator/CP platform"
 	select ARCH_CINTEGRATOR
+	select ARM_TIMER_SP804
 	help
 	  Include support for the ARM(R) Integrator CP platform.
 

arch/arm/mach-integrator/Makefile

@@ -4,7 +4,7 @@
 
 # Object file lists.
 
-obj-y					:= clock.o core.o lm.o
+obj-y					:= core.o lm.o
 obj-$(CONFIG_ARCH_INTEGRATOR_AP)	+= integrator_ap.o
 obj-$(CONFIG_ARCH_INTEGRATOR_CP)	+= integrator_cp.o
 

arch/arm/mach-integrator/common.h

@@ -1,2 +0,0 @@
-extern void integrator_time_init(unsigned long, unsigned int);
-extern unsigned long integrator_gettimeoffset(void);

arch/arm/mach-integrator/core.c

@@ -24,15 +24,13 @@
 #include <asm/clkdev.h>
 #include <mach/clkdev.h>
 #include <mach/hardware.h>
+#include <mach/platform.h>
 #include <asm/irq.h>
-#include <asm/hardware/arm_timer.h>
 #include <mach/cm.h>
 #include <asm/system.h>
 #include <asm/leds.h>
 #include <asm/mach/time.h>
 
-#include "common.h"
-
 static struct amba_pl010_data integrator_uart_data;
 
 static struct amba_device rtc_device = {
@@ -163,8 +161,8 @@ arch_initcall(integrator_init);
  *  UART0  7    6
  *  UART1  5    4
  */
-#define SC_CTRLC	(IO_ADDRESS(INTEGRATOR_SC_BASE) + INTEGRATOR_SC_CTRLC_OFFSET)
-#define SC_CTRLS	(IO_ADDRESS(INTEGRATOR_SC_BASE) + INTEGRATOR_SC_CTRLS_OFFSET)
+#define SC_CTRLC	IO_ADDRESS(INTEGRATOR_SC_CTRLC)
+#define SC_CTRLS	IO_ADDRESS(INTEGRATOR_SC_CTRLS)
 
 static void integrator_uart_set_mctrl(struct amba_device *dev, void __iomem *base, unsigned int mctrl)
 {
@@ -196,7 +194,7 @@ static struct amba_pl010_data integrator_uart_data = {
 	.set_mctrl = integrator_uart_set_mctrl,
 };
 
-#define CM_CTRL	IO_ADDRESS(INTEGRATOR_HDR_BASE) + INTEGRATOR_HDR_CTRL_OFFSET
+#define CM_CTRL	IO_ADDRESS(INTEGRATOR_HDR_CTRL)
 
 static DEFINE_SPINLOCK(cm_lock);
 
@@ -217,120 +215,3 @@ void cm_control(u32 mask, u32 set)
 }
 
 EXPORT_SYMBOL(cm_control);
-
-/*
- * Where is the timer (VA)?
- */
-#define TIMER0_VA_BASE (IO_ADDRESS(INTEGRATOR_CT_BASE)+0x00000000)
-#define TIMER1_VA_BASE (IO_ADDRESS(INTEGRATOR_CT_BASE)+0x00000100)
-#define TIMER2_VA_BASE (IO_ADDRESS(INTEGRATOR_CT_BASE)+0x00000200)
-#define VA_IC_BASE     IO_ADDRESS(INTEGRATOR_IC_BASE) 
-
-/*
- * How long is the timer interval?
- */
-#define TIMER_INTERVAL	(TICKS_PER_uSEC * mSEC_10)
-#if TIMER_INTERVAL >= 0x100000
-#define TICKS2USECS(x)	(256 * (x) / TICKS_PER_uSEC)
-#elif TIMER_INTERVAL >= 0x10000
-#define TICKS2USECS(x)	(16 * (x) / TICKS_PER_uSEC)
-#else
-#define TICKS2USECS(x)	((x) / TICKS_PER_uSEC)
-#endif
-
-static unsigned long timer_reload;
-
-/*
- * Returns number of ms since last clock interrupt.  Note that interrupts
- * will have been disabled by do_gettimeoffset()
- */
-unsigned long integrator_gettimeoffset(void)
-{
-	unsigned long ticks1, ticks2, status;
-
-	/*
-	 * Get the current number of ticks.  Note that there is a race
-	 * condition between us reading the timer and checking for
-	 * an interrupt.  We get around this by ensuring that the
-	 * counter has not reloaded between our two reads.
-	 */
-	ticks2 = readl(TIMER1_VA_BASE + TIMER_VALUE) & 0xffff;
-	do {
-		ticks1 = ticks2;
-		status = __raw_readl(VA_IC_BASE + IRQ_RAW_STATUS);
-		ticks2 = readl(TIMER1_VA_BASE + TIMER_VALUE) & 0xffff;
-	} while (ticks2 > ticks1);
-
-	/*
-	 * Number of ticks since last interrupt.
-	 */
-	ticks1 = timer_reload - ticks2;
-
-	/*
-	 * Interrupt pending?  If so, we've reloaded once already.
-	 */
-	if (status & (1 << IRQ_TIMERINT1))
-		ticks1 += timer_reload;
-
-	/*
-	 * Convert the ticks to usecs
-	 */
-	return TICKS2USECS(ticks1);
-}
-
-/*
- * IRQ handler for the timer
- */
-static irqreturn_t
-integrator_timer_interrupt(int irq, void *dev_id)
-{
-	/*
-	 * clear the interrupt
-	 */
-	writel(1, TIMER1_VA_BASE + TIMER_INTCLR);
-
-	timer_tick();
-
-	return IRQ_HANDLED;
-}
-
-static struct irqaction integrator_timer_irq = {
-	.name		= "Integrator Timer Tick",
-	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
-	.handler	= integrator_timer_interrupt,
-};
-
-/*
- * Set up timer interrupt, and return the current time in seconds.
- */
-void __init integrator_time_init(unsigned long reload, unsigned int ctrl)
-{
-	unsigned int timer_ctrl = TIMER_CTRL_ENABLE | TIMER_CTRL_PERIODIC;
-
-	timer_reload = reload;
-	timer_ctrl |= ctrl;
-
-	if (timer_reload > 0x100000) {
-		timer_reload >>= 8;
-		timer_ctrl |= TIMER_CTRL_DIV256;
-	} else if (timer_reload > 0x010000) {
-		timer_reload >>= 4;
-		timer_ctrl |= TIMER_CTRL_DIV16;
-	}
-
-	/*
-	 * Initialise to a known state (all timers off)
-	 */
-	writel(0, TIMER0_VA_BASE + TIMER_CTRL);
-	writel(0, TIMER1_VA_BASE + TIMER_CTRL);
-	writel(0, TIMER2_VA_BASE + TIMER_CTRL);
-
-	writel(timer_reload, TIMER1_VA_BASE + TIMER_LOAD);
-	writel(timer_reload, TIMER1_VA_BASE + TIMER_VALUE);
-	writel(timer_ctrl, TIMER1_VA_BASE + TIMER_CTRL);
-
-	/*
-	 * Make irqs happen for the system timer
-	 */
-	setup_irq(IRQ_TIMERINT1, &integrator_timer_irq);
-}

arch/arm/mach-integrator/cpu.c

@@ -20,32 +20,39 @@
 #include <linux/io.h>
 
 #include <mach/hardware.h>
+#include <mach/platform.h>
 #include <asm/mach-types.h>
-#include <asm/hardware/icst525.h>
+#include <asm/hardware/icst.h>
 
 static struct cpufreq_driver integrator_driver;
 
-#define CM_ID  	(IO_ADDRESS(INTEGRATOR_HDR_BASE)+INTEGRATOR_HDR_ID_OFFSET)
-#define CM_OSC	(IO_ADDRESS(INTEGRATOR_HDR_BASE)+INTEGRATOR_HDR_OSC_OFFSET)
-#define CM_STAT (IO_ADDRESS(INTEGRATOR_HDR_BASE)+INTEGRATOR_HDR_STAT_OFFSET)
-#define CM_LOCK (IO_ADDRESS(INTEGRATOR_HDR_BASE)+INTEGRATOR_HDR_LOCK_OFFSET)
+#define CM_ID  	IO_ADDRESS(INTEGRATOR_HDR_ID)
+#define CM_OSC	IO_ADDRESS(INTEGRATOR_HDR_OSC)
+#define CM_STAT IO_ADDRESS(INTEGRATOR_HDR_STAT)
+#define CM_LOCK IO_ADDRESS(INTEGRATOR_HDR_LOCK)
 
-static const struct icst525_params lclk_params = {
-	.ref		= 24000,
-	.vco_max	= 320000,
+static const struct icst_params lclk_params = {
+	.ref		= 24000000,
+	.vco_max	= ICST525_VCO_MAX_5V,
+	.vco_min	= ICST525_VCO_MIN,
 	.vd_min		= 8,
 	.vd_max		= 132,
 	.rd_min		= 24,
 	.rd_max		= 24,
+	.s2div		= icst525_s2div,
+	.idx2s		= icst525_idx2s,
 };
 
-static const struct icst525_params cclk_params = {
-	.ref		= 24000,
-	.vco_max	= 320000,
+static const struct icst_params cclk_params = {
+	.ref		= 24000000,
+	.vco_max	= ICST525_VCO_MAX_5V,
+	.vco_min	= ICST525_VCO_MIN,
 	.vd_min		= 12,
 	.vd_max		= 160,
 	.rd_min		= 24,
 	.rd_max		= 24,
+	.s2div		= icst525_s2div,
+	.idx2s		= icst525_idx2s,
 };
 
 /*
@@ -53,17 +60,17 @@ static const struct icst525_params cclk_params = {
  */
 static int integrator_verify_policy(struct cpufreq_policy *policy)
 {
-	struct icst525_vco vco;
+	struct icst_vco vco;
 
 	cpufreq_verify_within_limits(policy, 
 				     policy->cpuinfo.min_freq, 
 				     policy->cpuinfo.max_freq);
 
-	vco = icst525_khz_to_vco(&cclk_params, policy->max);
-	policy->max = icst525_khz(&cclk_params, vco);
+	vco = icst_hz_to_vco(&cclk_params, policy->max * 1000);
+	policy->max = icst_hz(&cclk_params, vco) / 1000;
 
-	vco = icst525_khz_to_vco(&cclk_params, policy->min);
-	policy->min = icst525_khz(&cclk_params, vco);
+	vco = icst_hz_to_vco(&cclk_params, policy->min * 1000);
+	policy->min = icst_hz(&cclk_params, vco) / 1000;
 
 	cpufreq_verify_within_limits(policy, 
 				     policy->cpuinfo.min_freq, 
@@ -79,7 +86,7 @@ static int integrator_set_target(struct cpufreq_policy *policy,
 {
 	cpumask_t cpus_allowed;
 	int cpu = policy->cpu;
-	struct icst525_vco vco;
+	struct icst_vco vco;
 	struct cpufreq_freqs freqs;
 	u_int cm_osc;
 
@@ -105,17 +112,17 @@ static int integrator_set_target(struct cpufreq_policy *policy,
 	}
 	vco.v = cm_osc & 255;
 	vco.r = 22;
-	freqs.old = icst525_khz(&cclk_params, vco);
+	freqs.old = icst_hz(&cclk_params, vco) / 1000;
 
-	/* icst525_khz_to_vco rounds down -- so we need the next
+	/* icst_hz_to_vco rounds down -- so we need the next
 	 * larger freq in case of CPUFREQ_RELATION_L.
 	 */
 	if (relation == CPUFREQ_RELATION_L)
 		target_freq += 999;
 	if (target_freq > policy->max)
 		target_freq = policy->max;
-	vco = icst525_khz_to_vco(&cclk_params, target_freq);
-	freqs.new = icst525_khz(&cclk_params, vco);
+	vco = icst_hz_to_vco(&cclk_params, target_freq * 1000);
+	freqs.new = icst_hz(&cclk_params, vco) / 1000;
 
 	freqs.cpu = policy->cpu;
 
@@ -155,7 +162,7 @@ static unsigned int integrator_get(unsigned int cpu)
 	cpumask_t cpus_allowed;
 	unsigned int current_freq;
 	u_int cm_osc;
-	struct icst525_vco vco;
+	struct icst_vco vco;
 
 	cpus_allowed = current->cpus_allowed;
 
@@ -173,7 +180,7 @@ static unsigned int integrator_get(unsigned int cpu)
 	vco.v = cm_osc & 255;
 	vco.r = 22;
 
-	current_freq = icst525_khz(&cclk_params, vco); /* current freq */
+	current_freq = icst_hz(&cclk_params, vco) / 1000; /* current freq */
 
 	set_cpus_allowed(current, cpus_allowed);
 

arch/arm/mach-integrator/impd1.c

@@ -24,7 +24,7 @@
 
 #include <asm/clkdev.h>
 #include <mach/clkdev.h>
-#include <asm/hardware/icst525.h>
+#include <asm/hardware/icst.h>
 #include <mach/lm.h>
 #include <mach/impd1.h>
 #include <asm/sizes.h>
@@ -40,32 +40,25 @@ struct impd1_module {
 	struct clk_lookup *clks[3];
 };
 
-static const struct icst525_params impd1_vco_params = {
-	.ref		= 24000,	/* 24 MHz */
-	.vco_max	= 200000,	/* 200 MHz */
+static const struct icst_params impd1_vco_params = {
+	.ref		= 24000000,	/* 24 MHz */
+	.vco_max	= ICST525_VCO_MAX_3V,
+	.vco_min	= ICST525_VCO_MIN,
 	.vd_min		= 12,
 	.vd_max		= 519,
 	.rd_min		= 3,
 	.rd_max		= 120,
+	.s2div		= icst525_s2div,
+	.idx2s		= icst525_idx2s,
 };
 
-static void impd1_setvco(struct clk *clk, struct icst525_vco vco)
+static void impd1_setvco(struct clk *clk, struct icst_vco vco)
 {
 	struct impd1_module *impd1 = clk->data;
-	int vconr = clk - impd1->vcos;
-	u32 val;
-
-	val = vco.v | (vco.r << 9) | (vco.s << 16);
+	u32 val = vco.v | (vco.r << 9) | (vco.s << 16);
 
 	writel(0xa05f, impd1->base + IMPD1_LOCK);
-	switch (vconr) {
-	case 0:
-		writel(val, impd1->base + IMPD1_OSC1);
-		break;
-	case 1:
-		writel(val, impd1->base + IMPD1_OSC2);
-		break;
-	}
+	writel(val, clk->vcoreg);
 	writel(0, impd1->base + IMPD1_LOCK);
 
 #ifdef DEBUG
@@ -73,11 +66,17 @@ static void impd1_setvco(struct clk *clk, struct icst525_vco vco)
 	vco.r = (val >> 9) & 0x7f;
 	vco.s = (val >> 16) & 7;
 
-	pr_debug("IM-PD1: VCO%d clock is %ld kHz\n",
-		 vconr, icst525_khz(&impd1_vco_params, vco));
+	pr_debug("IM-PD1: VCO%d clock is %ld Hz\n",
+		 vconr, icst525_hz(&impd1_vco_params, vco));
 #endif
 }
 
+static const struct clk_ops impd1_clk_ops = {
+	.round	= icst_clk_round,
+	.set	= icst_clk_set,
+	.setvco	= impd1_setvco,
+};
+
 void impd1_tweak_control(struct device *dev, u32 mask, u32 val)
 {
 	struct impd1_module *impd1 = dev_get_drvdata(dev);
@@ -373,11 +372,13 @@ static int impd1_probe(struct lm_device *dev)
 		(unsigned long)dev->resource.start);
 
 	for (i = 0; i < ARRAY_SIZE(impd1->vcos); i++) {
+		impd1->vcos[i].ops = &impd1_clk_ops,
 		impd1->vcos[i].owner = THIS_MODULE,
 		impd1->vcos[i].params = &impd1_vco_params,
-		impd1->vcos[i].data = impd1,
-		impd1->vcos[i].setvco = impd1_setvco;
+		impd1->vcos[i].data = impd1;
 	}
+	impd1->vcos[0].vcoreg = impd1->base + IMPD1_OSC1;
+	impd1->vcos[1].vcoreg = impd1->base + IMPD1_OSC2;
 
 	impd1->clks[0] = clkdev_alloc(&impd1->vcos[0], NULL, "lm%x:01000",
 					dev->id);

arch/arm/mach-integrator/include/mach/clkdev.h

@@ -2,14 +2,15 @@
 #define __ASM_MACH_CLKDEV_H
 
 #include <linux/module.h>
-#include <asm/hardware/icst525.h>
+#include <plat/clock.h>
 
 struct clk {
 	unsigned long		rate;
+	const struct clk_ops	*ops;
 	struct module		*owner;
-	const struct icst525_params *params;
+	const struct icst_params *params;
+	void __iomem		*vcoreg;
 	void			*data;
-	void			(*setvco)(struct clk *, struct icst525_vco vco);
 };
 
 static inline int __clk_get(struct clk *clk)

arch/arm/mach-integrator/include/mach/entry-macro.S

@@ -8,6 +8,7 @@
  * warranty of any kind, whether express or implied.
  */
 #include <mach/hardware.h>
+#include <mach/platform.h>
 #include <mach/irqs.h>
 
  		.macro	disable_fiq

arch/arm/mach-integrator/include/mach/hardware.h

@@ -23,7 +23,6 @@
 #define __ASM_ARCH_HARDWARE_H
 
 #include <asm/sizes.h>
-#include <mach/platform.h>
 
 /*
  * Where in virtual memory the IO devices (timers, system controllers
@@ -36,17 +35,19 @@
 #define PCIO_BASE		PCI_IO_VADDR
 #define PCIMEM_BASE		PCI_MEMORY_VADDR
 
-#ifdef CONFIG_MMU
-/* macro to get at IO space when running virtually */
-#define IO_ADDRESS(x) (((x) >> 4) + IO_BASE) 
-#else
-#define IO_ADDRESS(x) (x)
-#endif
-
 #define pcibios_assign_all_busses()	1
 
 #define PCIBIOS_MIN_IO		0x6000
 #define PCIBIOS_MIN_MEM 	0x00100000
 
+/* macro to get at IO space when running virtually */
+#ifdef CONFIG_MMU
+#define IO_ADDRESS(x)	(((x) & 0x000fffff) | (((x) >> 4) & 0x0ff00000) | IO_BASE)
+#else
+#define IO_ADDRESS(x)	(x)
+#endif
+
+#define __io_address(n)		((void __iomem *)IO_ADDRESS(n))
+
 #endif
 

arch/arm/mach-integrator/include/mach/platform.h

@@ -23,9 +23,6 @@
  *
  *   Integrator address map
  *
- * 	NOTE: This is a multi-hosted header file for use with uHAL and
- * 	      supported debuggers.
- *
  * ***********************************************************************/
 
 #ifndef __address_h
@@ -290,12 +287,14 @@
 #define INTEGRATOR_DBG_LEDS             (INTEGRATOR_DBG_BASE + INTEGRATOR_DBG_LEDS_OFFSET)
 #define INTEGRATOR_DBG_SWITCH           (INTEGRATOR_DBG_BASE + INTEGRATOR_DBG_SWITCH_OFFSET)
 
+#define INTEGRATOR_AP_GPIO_BASE		0x1B000000	/* GPIO */
 
-#if defined(CONFIG_ARCH_INTEGRATOR_AP)
-#define INTEGRATOR_GPIO_BASE            0x1B000000	 /*  GPIO */
-#elif defined(CONFIG_ARCH_INTEGRATOR_CP)
-#define INTEGRATOR_GPIO_BASE            0xC9000000	 /*  GPIO */
-#endif
+#define INTEGRATOR_CP_MMC_BASE		0x1C000000	/* MMC */
+#define INTEGRATOR_CP_AACI_BASE		0x1D000000	/* AACI */
+#define INTEGRATOR_CP_ETH_BASE		0xC8000000	/* Ethernet */
+#define INTEGRATOR_CP_GPIO_BASE		0xC9000000	/* GPIO */
+#define INTEGRATOR_CP_SIC_BASE		0xCA000000	/* SIC */
+#define INTEGRATOR_CP_CTL_BASE		0xCB000000	/* CP system control */
 
 /* ------------------------------------------------------------------------
  *  KMI keyboard/mouse definitions
@@ -328,20 +327,6 @@
  */
 #define PHYS_PCI_V3_BASE                0x62000000
 
-#define PCI_DRAMSIZE                    INTEGRATOR_SSRAM_SIZE
-
-/* 'export' these to UHAL */
-#define UHAL_PCI_IO                     PCI_IO_BASE
-#define UHAL_PCI_MEM                    PCI_MEM_BASE
-#define UHAL_PCI_ALLOC_IO_BASE          0x00004000
-#define UHAL_PCI_ALLOC_MEM_BASE         PCI_MEM_BASE
-#define UHAL_PCI_MAX_SLOT               20
-
-/* ========================================================================
- *  Start of uHAL definitions
- * ========================================================================
- */
-
 /* ------------------------------------------------------------------------
  *  Integrator Interrupt Controllers
  * ------------------------------------------------------------------------
@@ -389,7 +374,7 @@
  */
 
 /* ------------------------------------------------------------------------
- *  LED's - The header LED is not accessible via the uHAL API
+ *  LED's
  * ------------------------------------------------------------------------
  *
  */
@@ -401,35 +386,19 @@
 
 #define LED_BANK                        INTEGRATOR_DBG_LEDS
 
-/*
- *  Memory definitions - run uHAL out of SSRAM.
- *
- */
-#define uHAL_MEMORY_SIZE                INTEGRATOR_SSRAM_SIZE
-
-/*
- *  Clean base - dummy
- *
- */
-#define CLEAN_BASE                      INTEGRATOR_BOOT_ROM_HI
-
 /*
  *  Timer definitions
  *
  *  Only use timer 1 & 2
  *  (both run at 24MHz and will need the clock divider set to 16).
  *
- *  Timer 0 runs at bus frequency and therefore could vary and currently
- *  uHAL can't handle that.
- *
+ *  Timer 0 runs at bus frequency
  */
 
 #define INTEGRATOR_TIMER0_BASE          INTEGRATOR_CT_BASE
 #define INTEGRATOR_TIMER1_BASE          (INTEGRATOR_CT_BASE + 0x100)
 #define INTEGRATOR_TIMER2_BASE          (INTEGRATOR_CT_BASE + 0x200)
 
-#define MAX_TIMER                       2
-#define MAX_PERIOD                      699050
 #define TICKS_PER_uSEC                  24
 
 /*
@@ -437,14 +406,9 @@
  *
  */
 #define mSEC_1                          1000
-#define mSEC_5                          (mSEC_1 * 5)
 #define mSEC_10                         (mSEC_1 * 10)
-#define mSEC_25                         (mSEC_1 * 25)
-#define SEC_1                           (mSEC_1 * 1000)
 
 #define INTEGRATOR_CSR_BASE             0x10000000
 #define INTEGRATOR_CSR_SIZE             0x10000000
 
 #endif
-
-/* 	END */

arch/arm/mach-integrator/integrator_ap.c

@@ -27,9 +27,14 @@
 #include <linux/sysdev.h>
 #include <linux/amba/bus.h>
 #include <linux/amba/kmi.h>
+#include <linux/clocksource.h>
+#include <linux/clockchips.h>
+#include <linux/interrupt.h>
 #include <linux/io.h>
 
 #include <mach/hardware.h>
+#include <mach/platform.h>
+#include <asm/hardware/arm_timer.h>
 #include <asm/irq.h>
 #include <asm/setup.h>
 #include <asm/param.h>		/* HZ */
@@ -43,8 +48,6 @@
 #include <asm/mach/map.h>
 #include <asm/mach/time.h>
 
-#include "common.h"
-
 /* 
  * All IO addresses are mapped onto VA 0xFFFx.xxxx, where x.xxxx
  * is the (PA >> 12).
@@ -55,7 +58,7 @@
 #define VA_IC_BASE	IO_ADDRESS(INTEGRATOR_IC_BASE) 
 #define VA_SC_BASE	IO_ADDRESS(INTEGRATOR_SC_BASE)
 #define VA_EBI_BASE	IO_ADDRESS(INTEGRATOR_EBI_BASE)
-#define VA_CMIC_BASE	IO_ADDRESS(INTEGRATOR_HDR_BASE) + INTEGRATOR_HDR_IC_OFFSET
+#define VA_CMIC_BASE	IO_ADDRESS(INTEGRATOR_HDR_IC)
 
 /*
  * Logical      Physical
@@ -117,8 +120,8 @@ static struct map_desc ap_io_desc[] __initdata = {
 		.length		= SZ_4K,
 		.type		= MT_DEVICE
 	}, {
-		.virtual	= IO_ADDRESS(INTEGRATOR_GPIO_BASE),
-		.pfn		= __phys_to_pfn(INTEGRATOR_GPIO_BASE),
+		.virtual	= IO_ADDRESS(INTEGRATOR_AP_GPIO_BASE),
+		.pfn		= __phys_to_pfn(INTEGRATOR_AP_GPIO_BASE),
 		.length		= SZ_4K,
 		.type		= MT_DEVICE
 	}, {
@@ -334,14 +337,163 @@ static void __init ap_init(void)
 	}
 }
 
+/*
+ * Where is the timer (VA)?
+ */
+#define TIMER0_VA_BASE IO_ADDRESS(INTEGRATOR_TIMER0_BASE)
+#define TIMER1_VA_BASE IO_ADDRESS(INTEGRATOR_TIMER1_BASE)
+#define TIMER2_VA_BASE IO_ADDRESS(INTEGRATOR_TIMER2_BASE)
+
+/*
+ * How long is the timer interval?
+ */
+#define TIMER_INTERVAL	(TICKS_PER_uSEC * mSEC_10)
+#if TIMER_INTERVAL >= 0x100000
+#define TICKS2USECS(x)	(256 * (x) / TICKS_PER_uSEC)
+#elif TIMER_INTERVAL >= 0x10000
+#define TICKS2USECS(x)	(16 * (x) / TICKS_PER_uSEC)
+#else
+#define TICKS2USECS(x)	((x) / TICKS_PER_uSEC)
+#endif
+
+static unsigned long timer_reload;
+
+static void __iomem * const clksrc_base = (void __iomem *)TIMER2_VA_BASE;
+
+static cycle_t timersp_read(struct clocksource *cs)
+{
+	return ~(readl(clksrc_base + TIMER_VALUE) & 0xffff);
+}
+
+static struct clocksource clocksource_timersp = {
+	.name		= "timer2",
+	.rating		= 200,
+	.read		= timersp_read,
+	.mask		= CLOCKSOURCE_MASK(16),
+	.shift		= 16,
+	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+static void integrator_clocksource_init(u32 khz)
+{
+	struct clocksource *cs = &clocksource_timersp;
+	void __iomem *base = clksrc_base;
+	u32 ctrl = TIMER_CTRL_ENABLE;
+
+	if (khz >= 1500) {
+		khz /= 16;
+		ctrl = TIMER_CTRL_DIV16;
+	}
+
+	writel(ctrl, base + TIMER_CTRL);
+	writel(0xffff, base + TIMER_LOAD);
+
+	cs->mult = clocksource_khz2mult(khz, cs->shift);
+	clocksource_register(cs);
+}
+
+static void __iomem * const clkevt_base = (void __iomem *)TIMER1_VA_BASE;
+
+/*
+ * IRQ handler for the timer
+ */
+static irqreturn_t integrator_timer_interrupt(int irq, void *dev_id)
+{
+	struct clock_event_device *evt = dev_id;
+
+	/* clear the interrupt */
+	writel(1, clkevt_base + TIMER_INTCLR);
+
+	evt->event_handler(evt);
+
+	return IRQ_HANDLED;
+}
+
+static void clkevt_set_mode(enum clock_event_mode mode, struct clock_event_device *evt)
+{
+	u32 ctrl = readl(clkevt_base + TIMER_CTRL) & ~TIMER_CTRL_ENABLE;
+
+	BUG_ON(mode == CLOCK_EVT_MODE_ONESHOT);
+
+	if (mode == CLOCK_EVT_MODE_PERIODIC) {
+		writel(ctrl, clkevt_base + TIMER_CTRL);
+		writel(timer_reload, clkevt_base + TIMER_LOAD);
+		ctrl |= TIMER_CTRL_PERIODIC | TIMER_CTRL_ENABLE;
+	}
+
+	writel(ctrl, clkevt_base + TIMER_CTRL);
+}
+
+static int clkevt_set_next_event(unsigned long next, struct clock_event_device *evt)
+{
+	unsigned long ctrl = readl(clkevt_base + TIMER_CTRL);
+
+	writel(ctrl & ~TIMER_CTRL_ENABLE, clkevt_base + TIMER_CTRL);
+	writel(next, clkevt_base + TIMER_LOAD);
+	writel(ctrl | TIMER_CTRL_ENABLE, clkevt_base + TIMER_CTRL);
+
+	return 0;
+}
+
+static struct clock_event_device integrator_clockevent = {
+	.name		= "timer1",
+	.shift		= 34,
+	.features	= CLOCK_EVT_FEAT_PERIODIC,
+	.set_mode	= clkevt_set_mode,
+	.set_next_event	= clkevt_set_next_event,
+	.rating		= 300,
+	.cpumask	= cpu_all_mask,
+};
+
+static struct irqaction integrator_timer_irq = {
+	.name		= "timer",
+	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
+	.handler	= integrator_timer_interrupt,
+	.dev_id		= &integrator_clockevent,
+};
+
+static void integrator_clockevent_init(u32 khz)
+{
+	struct clock_event_device *evt = &integrator_clockevent;
+	unsigned int ctrl = 0;
+
+	if (khz * 1000 > 0x100000 * HZ) {
+		khz /= 256;
+		ctrl |= TIMER_CTRL_DIV256;
+	} else if (khz * 1000 > 0x10000 * HZ) {
+		khz /= 16;
+		ctrl |= TIMER_CTRL_DIV16;
+	}
+
+	timer_reload = khz * 1000 / HZ;
+	writel(ctrl, clkevt_base + TIMER_CTRL);
+
+	evt->irq = IRQ_TIMERINT1;
+	evt->mult = div_sc(khz, NSEC_PER_MSEC, evt->shift);
+	evt->max_delta_ns = clockevent_delta2ns(0xffff, evt);
+	evt->min_delta_ns = clockevent_delta2ns(0xf, evt);
+
+	setup_irq(IRQ_TIMERINT1, &integrator_timer_irq);
+	clockevents_register_device(evt);
+}
+
+/*
+ * Set up timer(s).
+ */
 static void __init ap_init_timer(void)
 {
-	integrator_time_init(1000000 * TICKS_PER_uSEC / HZ, 0);
+	u32 khz = TICKS_PER_uSEC * 1000;
+
+	writel(0, TIMER0_VA_BASE + TIMER_CTRL);
+	writel(0, TIMER1_VA_BASE + TIMER_CTRL);
+	writel(0, TIMER2_VA_BASE + TIMER_CTRL);
+
+	integrator_clocksource_init(khz);
+	integrator_clockevent_init(khz);
 }
 
 static struct sys_timer ap_timer = {
 	.init		= ap_init_timer,
-	.offset		= integrator_gettimeoffset,
 };
 
 MACHINE_START(INTEGRATOR, "ARM-Integrator")

arch/arm/mach-integrator/integrator_cp.c

@@ -25,10 +25,12 @@
 #include <asm/clkdev.h>
 #include <mach/clkdev.h>
 #include <mach/hardware.h>
+#include <mach/platform.h>
 #include <asm/irq.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
-#include <asm/hardware/icst525.h>
+#include <asm/hardware/arm_timer.h>
+#include <asm/hardware/icst.h>
 
 #include <mach/cm.h>
 #include <mach/lm.h>
@@ -39,24 +41,20 @@
 #include <asm/mach/map.h>
 #include <asm/mach/time.h>
 
-#include "common.h"
-
-#define INTCP_PA_MMC_BASE		0x1c000000
-#define INTCP_PA_AACI_BASE		0x1d000000
+#include <plat/timer-sp.h>
 
 #define INTCP_PA_FLASH_BASE		0x24000000
 #define INTCP_FLASH_SIZE		SZ_32M
 
 #define INTCP_PA_CLCD_BASE		0xc0000000
 
-#define INTCP_VA_CIC_BASE		IO_ADDRESS(INTEGRATOR_HDR_BASE) + 0x40
+#define INTCP_VA_CIC_BASE		IO_ADDRESS(INTEGRATOR_HDR_BASE + 0x40)
 #define INTCP_VA_PIC_BASE		IO_ADDRESS(INTEGRATOR_IC_BASE)
-#define INTCP_VA_SIC_BASE		IO_ADDRESS(0xca000000)
+#define INTCP_VA_SIC_BASE		IO_ADDRESS(INTEGRATOR_CP_SIC_BASE)
 
-#define INTCP_PA_ETH_BASE		0xc8000000
 #define INTCP_ETH_SIZE			0x10
 
-#define INTCP_VA_CTRL_BASE		IO_ADDRESS(0xcb000000)
+#define INTCP_VA_CTRL_BASE		IO_ADDRESS(INTEGRATOR_CP_CTL_BASE)
 #define INTCP_FLASHPROG			0x04
 #define CINTEGRATOR_FLASHPROG_FLVPPEN	(1 << 0)
 #define CINTEGRATOR_FLASHPROG_FLWREN	(1 << 1)
@@ -71,7 +69,9 @@
  * f1600000	16000000	UART 0
  * f1700000	17000000	UART 1
  * f1a00000	1a000000	Debug LEDs
- * f1b00000	1b000000	GPIO
+ * fc900000	c9000000	GPIO
+ * fca00000	ca000000	SIC
+ * fcb00000	cb000000	CP system control
  */
 
 static struct map_desc intcp_io_desc[] __initdata = {
@@ -116,18 +116,18 @@ static struct map_desc intcp_io_desc[] __initdata = {
 		.length		= SZ_4K,
 		.type		= MT_DEVICE
 	}, {
-		.virtual	= IO_ADDRESS(INTEGRATOR_GPIO_BASE),
-		.pfn		= __phys_to_pfn(INTEGRATOR_GPIO_BASE),
+		.virtual	= IO_ADDRESS(INTEGRATOR_CP_GPIO_BASE),
+		.pfn		= __phys_to_pfn(INTEGRATOR_CP_GPIO_BASE),
 		.length		= SZ_4K,
 		.type		= MT_DEVICE
 	}, {
-		.virtual	= IO_ADDRESS(0xca000000),
-		.pfn		= __phys_to_pfn(0xca000000),
+		.virtual	= IO_ADDRESS(INTEGRATOR_CP_SIC_BASE),
+		.pfn		= __phys_to_pfn(INTEGRATOR_CP_SIC_BASE),
 		.length		= SZ_4K,
 		.type		= MT_DEVICE
 	}, {
-		.virtual	= IO_ADDRESS(0xcb000000),
-		.pfn		= __phys_to_pfn(0xcb000000),
+		.virtual	= IO_ADDRESS(INTEGRATOR_CP_CTL_BASE),
+		.pfn		= __phys_to_pfn(INTEGRATOR_CP_CTL_BASE),
 		.length		= SZ_4K,
 		.type		= MT_DEVICE
 	}
@@ -266,33 +266,43 @@ static void __init intcp_init_irq(void)
 /*
  * Clock handling
  */
-#define CM_LOCK (IO_ADDRESS(INTEGRATOR_HDR_BASE)+INTEGRATOR_HDR_LOCK_OFFSET)
-#define CM_AUXOSC (IO_ADDRESS(INTEGRATOR_HDR_BASE)+0x1c)
+#define CM_LOCK		(__io_address(INTEGRATOR_HDR_BASE)+INTEGRATOR_HDR_LOCK_OFFSET)
+#define CM_AUXOSC	(__io_address(INTEGRATOR_HDR_BASE)+0x1c)
 
-static const struct icst525_params cp_auxvco_params = {
-	.ref		= 24000,
-	.vco_max	= 320000,
+static const struct icst_params cp_auxvco_params = {
+	.ref		= 24000000,
+	.vco_max	= ICST525_VCO_MAX_5V,
+	.vco_min	= ICST525_VCO_MIN,
 	.vd_min 	= 8,
 	.vd_max 	= 263,
 	.rd_min 	= 3,
 	.rd_max 	= 65,
+	.s2div		= icst525_s2div,
+	.idx2s		= icst525_idx2s,
 };
 
-static void cp_auxvco_set(struct clk *clk, struct icst525_vco vco)
+static void cp_auxvco_set(struct clk *clk, struct icst_vco vco)
 {
 	u32 val;
 
-	val = readl(CM_AUXOSC) & ~0x7ffff;
+	val = readl(clk->vcoreg) & ~0x7ffff;
 	val |= vco.v | (vco.r << 9) | (vco.s << 16);
 
 	writel(0xa05f, CM_LOCK);
-	writel(val, CM_AUXOSC);
+	writel(val, clk->vcoreg);
 	writel(0, CM_LOCK);
 }
 
+static const struct clk_ops cp_auxclk_ops = {
+	.round	= icst_clk_round,
+	.set	= icst_clk_set,
+	.setvco	= cp_auxvco_set,
+};
+
 static struct clk cp_auxclk = {
+	.ops	= &cp_auxclk_ops,
 	.params	= &cp_auxvco_params,
-	.setvco = cp_auxvco_set,
+	.vcoreg	= CM_AUXOSC,
 };
 
 static struct clk_lookup cp_lookups[] = {
@@ -363,8 +373,8 @@ static struct platform_device intcp_flash_device = {
 
 static struct resource smc91x_resources[] = {
 	[0] = {
-		.start	= INTCP_PA_ETH_BASE,
-		.end	= INTCP_PA_ETH_BASE + INTCP_ETH_SIZE - 1,
+		.start	= INTEGRATOR_CP_ETH_BASE,
+		.end	= INTEGRATOR_CP_ETH_BASE + INTCP_ETH_SIZE - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
@@ -394,8 +404,8 @@ static struct platform_device *intcp_devs[] __initdata = {
  */
 static unsigned int mmc_status(struct device *dev)
 {
-	unsigned int status = readl(IO_ADDRESS(0xca000000) + 4);
-	writel(8, IO_ADDRESS(0xcb000000) + 8);
+	unsigned int status = readl(IO_ADDRESS(0xca000000 + 4));
+	writel(8, IO_ADDRESS(INTEGRATOR_CP_CTL_BASE + 8));
 
 	return status & 8;
 }
@@ -413,8 +423,8 @@ static struct amba_device mmc_device = {
 		.platform_data = &mmc_data,
 	},
 	.res		= {
-		.start	= INTCP_PA_MMC_BASE,
-		.end	= INTCP_PA_MMC_BASE + SZ_4K - 1,
+		.start	= INTEGRATOR_CP_MMC_BASE,
+		.end	= INTEGRATOR_CP_MMC_BASE + SZ_4K - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	.irq		= { IRQ_CP_MMCIINT0, IRQ_CP_MMCIINT1 },
@@ -426,8 +436,8 @@ static struct amba_device aaci_device = {
 		.init_name = "mb:1d",
 	},
 	.res		= {
-		.start	= INTCP_PA_AACI_BASE,
-		.end	= INTCP_PA_AACI_BASE + SZ_4K - 1,
+		.start	= INTEGRATOR_CP_AACI_BASE,
+		.end	= INTEGRATOR_CP_AACI_BASE + SZ_4K - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	.irq		= { IRQ_CP_AACIINT, NO_IRQ },
@@ -567,16 +577,22 @@ static void __init intcp_init(void)
 	}
 }
 
-#define TIMER_CTRL_IE	(1 << 5)			/* Interrupt Enable */
+#define TIMER0_VA_BASE __io_address(INTEGRATOR_TIMER0_BASE)
+#define TIMER1_VA_BASE __io_address(INTEGRATOR_TIMER1_BASE)
+#define TIMER2_VA_BASE __io_address(INTEGRATOR_TIMER2_BASE)
 
 static void __init intcp_timer_init(void)
 {
-	integrator_time_init(1000000 / HZ, TIMER_CTRL_IE);
+	writel(0, TIMER0_VA_BASE + TIMER_CTRL);
+	writel(0, TIMER1_VA_BASE + TIMER_CTRL);
+	writel(0, TIMER2_VA_BASE + TIMER_CTRL);
+
+	sp804_clocksource_init(TIMER2_VA_BASE);
+	sp804_clockevents_init(TIMER1_VA_BASE, IRQ_TIMERINT1);
 }
 
 static struct sys_timer cp_timer = {
 	.init		= intcp_timer_init,
-	.offset		= integrator_gettimeoffset,
 };
 
 MACHINE_START(CINTEGRATOR, "ARM-IntegratorCP")

arch/arm/mach-integrator/leds.c

@@ -27,6 +27,7 @@
 #include <linux/io.h>
 
 #include <mach/hardware.h>
+#include <mach/platform.h>
 #include <asm/leds.h>
 #include <asm/system.h>
 #include <asm/mach-types.h>

arch/arm/mach-integrator/pci_v3.c

@@ -30,6 +30,7 @@
 #include <linux/io.h>
 
 #include <mach/hardware.h>
+#include <mach/platform.h>
 #include <asm/irq.h>
 #include <asm/signal.h>
 #include <asm/system.h>
@@ -390,9 +391,9 @@ static int __init pci_v3_setup_resources(struct resource **resource)
  * means I can't get additional information on the reason for the pm2fb
  * problems.  I suppose I'll just have to mind-meld with the machine. ;)
  */
-#define SC_PCI     (IO_ADDRESS(INTEGRATOR_SC_BASE) + INTEGRATOR_SC_PCIENABLE_OFFSET)
-#define SC_LBFADDR (IO_ADDRESS(INTEGRATOR_SC_BASE) + 0x20)
-#define SC_LBFCODE (IO_ADDRESS(INTEGRATOR_SC_BASE) + 0x24)
+#define SC_PCI     IO_ADDRESS(INTEGRATOR_SC_PCIENABLE)
+#define SC_LBFADDR IO_ADDRESS(INTEGRATOR_SC_BASE + 0x20)
+#define SC_LBFCODE IO_ADDRESS(INTEGRATOR_SC_BASE + 0x24)
 
 static int
 v3_pci_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs)

arch/arm/mach-iop32x/n2100.c

@@ -177,7 +177,7 @@ static struct plat_serial8250_port n2100_serial_port[] = {
 		.mapbase	= N2100_UART,
 		.membase	= (char *)N2100_UART,
 		.irq		= 0,
-		.flags		= UPF_SKIP_TEST,
+		.flags		= UPF_SKIP_TEST | UPF_AUTO_IRQ | UPF_SHARE_IRQ,
 		.iotype		= UPIO_MEM,
 		.regshift	= 0,
 		.uartclk	= 1843200,

arch/arm/mach-ixp4xx/common.c

@@ -21,7 +21,6 @@
 #include <linux/tty.h>
 #include <linux/platform_device.h>
 #include <linux/serial_core.h>
-#include <linux/bootmem.h>
 #include <linux/interrupt.h>
 #include <linux/bitops.h>
 #include <linux/time.h>

arch/arm/mach-nomadik/Kconfig

@@ -6,6 +6,7 @@ config MACH_NOMADIK_8815NHK
 	bool "ST 8815 Nomadik Hardware Kit (evaluation board)"
 	select NOMADIK_8815
 	select HAS_MTU
+	select NOMADIK_GPIO
 
 endmenu
 

arch/arm/mach-nomadik/Makefile

@@ -7,7 +7,7 @@
 
 # Object file lists.
 
-obj-y			+= clock.o gpio.o
+obj-y			+= clock.o
 
 # Cpu revision
 obj-$(CONFIG_NOMADIK_8815) += cpu-8815.o

arch/arm/mach-nomadik/board-nhk8815.c

@@ -32,7 +32,6 @@
 #include <mach/setup.h>
 #include <mach/nand.h>
 #include <mach/fsmc.h>
-#include "clock.h"
 
 /* Initial value for SRC control register: all timers use MXTAL/8 source */
 #define SRC_CR_INIT_MASK	0x00007fff
@@ -202,11 +201,6 @@ static struct amba_device *amba_devs[] __initdata = {
 	&uart1_device,
 };
 
-/* We have a fixed clock alone, by now */
-static struct clk nhk8815_clk_48 = {
-	.rate = 48*1000*1000,
-};
-
 static struct resource nhk8815_eth_resources[] = {
 	{
 		.name = "smc91x-regs",
@@ -276,10 +270,8 @@ static void __init nhk8815_platform_init(void)
 	platform_add_devices(nhk8815_platform_devices,
 			     ARRAY_SIZE(nhk8815_platform_devices));
 
-	for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
-		nmdk_clk_create(&nhk8815_clk_48, amba_devs[i]->dev.init_name);
+	for (i = 0; i < ARRAY_SIZE(amba_devs); i++)
 		amba_device_register(amba_devs[i], &iomem_resource);
-	}
 }
 
 MACHINE_START(NOMADIK, "NHK8815")

arch/arm/mach-nomadik/clock.c

@@ -32,14 +32,36 @@ void clk_disable(struct clk *clk)
 }
 EXPORT_SYMBOL(clk_disable);
 
-/* Create a clock structure with the given name */
-int nmdk_clk_create(struct clk *clk, const char *dev_id)
-{
-	struct clk_lookup *clkdev;
+/* We have a fixed clock alone, for now */
+static struct clk clk_48 = {
+	.rate = 48 * 1000 * 1000,
+};
+
+/*
+ * Catch-all default clock to satisfy drivers using the clk API.  We don't
+ * model the actual hardware clocks yet.
+ */
+static struct clk clk_default;
 
-	clkdev = clkdev_alloc(clk, NULL, dev_id);
-	if (!clkdev)
-		return -ENOMEM;
-	clkdev_add(clkdev);
+#define CLK(_clk, dev)				\
+	{					\
+		.clk		= _clk,		\
+		.dev_id		= dev,		\
+	}
+
+static struct clk_lookup lookups[] = {
+	CLK(&clk_48, "uart0"),
+	CLK(&clk_48, "uart1"),
+	CLK(&clk_default, "gpio.0"),
+	CLK(&clk_default, "gpio.1"),
+	CLK(&clk_default, "gpio.2"),
+	CLK(&clk_default, "gpio.3"),
+};
+
+static int __init clk_init(void)
+{
+	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
 	return 0;
 }
+
+arch_initcall(clk_init);

arch/arm/mach-nomadik/clock.h

@@ -11,4 +11,3 @@
 struct clk {
 	unsigned long		rate;
 };
-extern int nmdk_clk_create(struct clk *clk, const char *dev_id);

arch/arm/mach-nomadik/cpu-8815.c

@@ -20,6 +20,7 @@
 #include <linux/init.h>
 #include <linux/device.h>
 #include <linux/amba/bus.h>
+#include <linux/platform_device.h>
 #include <linux/gpio.h>
 
 #include <mach/hardware.h>
@@ -30,60 +31,66 @@
 #include <asm/cacheflush.h>
 #include <asm/hardware/cache-l2x0.h>
 
+#define __MEM_4K_RESOURCE(x) \
+	.res = {.start = (x), .end = (x) + SZ_4K - 1, .flags = IORESOURCE_MEM}
+
 /* The 8815 has 4 GPIO blocks, let's register them immediately */
+
+#define GPIO_RESOURCE(block)						\
+	{								\
+		.start	= NOMADIK_GPIO##block##_BASE,			\
+		.end	= NOMADIK_GPIO##block##_BASE + SZ_4K - 1,	\
+		.flags	= IORESOURCE_MEM,				\
+	},								\
+	{								\
+		.start	= IRQ_GPIO##block,				\
+		.end	= IRQ_GPIO##block,				\
+		.flags	= IORESOURCE_IRQ,				\
+	}
+
+#define GPIO_DEVICE(block)						\
+	{								\
+		.name 		= "gpio",				\
+		.id		= block,				\
+		.num_resources 	= 2,					\
+		.resource	= &cpu8815_gpio_resources[block * 2],	\
+		.dev = {						\
+			.platform_data = &cpu8815_gpio[block],		\
+		},							\
+	}
+
 static struct nmk_gpio_platform_data cpu8815_gpio[] = {
 	{
 		.name = "GPIO-0-31",
 		.first_gpio = 0,
 		.first_irq = NOMADIK_GPIO_TO_IRQ(0),
-		.parent_irq = IRQ_GPIO0,
 	}, {
 		.name = "GPIO-32-63",
 		.first_gpio = 32,
 		.first_irq = NOMADIK_GPIO_TO_IRQ(32),
-		.parent_irq = IRQ_GPIO1,
 	}, {
 		.name = "GPIO-64-95",
 		.first_gpio = 64,
 		.first_irq = NOMADIK_GPIO_TO_IRQ(64),
-		.parent_irq = IRQ_GPIO2,
 	}, {
 		.name = "GPIO-96-127", /* 124..127 not routed to pin */
 		.first_gpio = 96,
 		.first_irq = NOMADIK_GPIO_TO_IRQ(96),
-		.parent_irq = IRQ_GPIO3,
 	}
 };
 
-#define __MEM_4K_RESOURCE(x) \
-	.res = {.start = (x), .end = (x) + SZ_4K - 1, .flags = IORESOURCE_MEM}
+static struct resource cpu8815_gpio_resources[] = {
+	GPIO_RESOURCE(0),
+	GPIO_RESOURCE(1),
+	GPIO_RESOURCE(2),
+	GPIO_RESOURCE(3),
+};
 
-static struct amba_device cpu8815_amba_gpio[] = {
-	{
-		.dev = {
-			.init_name = "gpio0",
-			.platform_data = cpu8815_gpio + 0,
-		},
-		__MEM_4K_RESOURCE(NOMADIK_GPIO0_BASE),
-	}, {
-		.dev = {
-			.init_name = "gpio1",
-			.platform_data = cpu8815_gpio + 1,
-		},
-		__MEM_4K_RESOURCE(NOMADIK_GPIO1_BASE),
-	}, {
-		.dev = {
-			.init_name = "gpio2",
-			.platform_data = cpu8815_gpio + 2,
-		},
-		__MEM_4K_RESOURCE(NOMADIK_GPIO2_BASE),
-	}, {
-		.dev = {
-			.init_name = "gpio3",
-			.platform_data = cpu8815_gpio + 3,
-		},
-		__MEM_4K_RESOURCE(NOMADIK_GPIO3_BASE),
-	},
+static struct platform_device cpu8815_platform_gpio[] = {
+	GPIO_DEVICE(0),
+	GPIO_DEVICE(1),
+	GPIO_DEVICE(2),
+	GPIO_DEVICE(3),
 };
 
 static struct amba_device cpu8815_amba_rng = {
@@ -93,11 +100,14 @@ static struct amba_device cpu8815_amba_rng = {
 	__MEM_4K_RESOURCE(NOMADIK_RNG_BASE),
 };
 
+static struct platform_device *platform_devs[] __initdata = {
+	cpu8815_platform_gpio + 0,
+	cpu8815_platform_gpio + 1,
+	cpu8815_platform_gpio + 2,
+	cpu8815_platform_gpio + 3,
+};
+
 static struct amba_device *amba_devs[] __initdata = {
-	cpu8815_amba_gpio + 0,
-	cpu8815_amba_gpio + 1,
-	cpu8815_amba_gpio + 2,
-	cpu8815_amba_gpio + 3,
 	&cpu8815_amba_rng
 };
 
@@ -105,6 +115,7 @@ static int __init cpu8815_init(void)
 {
 	int i;
 
+	platform_add_devices(platform_devs, ARRAY_SIZE(platform_devs));
 	for (i = 0; i < ARRAY_SIZE(amba_devs); i++)
 		amba_device_register(amba_devs[i], &iomem_resource);
 	return 0;

arch/arm/mach-nomadik/include/mach/gpio.h

@@ -1,71 +1,6 @@
-/*
- * Structures and registers for GPIO access in the Nomadik SoC
- *
- * Copyright (C) 2008 STMicroelectronics
- *     Author: Prafulla WADASKAR <prafulla.wadaskar@st.com>
- * Copyright (C) 2009 Alessandro Rubini <rubini@unipv.it>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
 #ifndef __ASM_ARCH_GPIO_H
 #define __ASM_ARCH_GPIO_H
 
-#include <asm-generic/gpio.h>
-
-/*
- * These currently cause a function call to happen, they may be optimized
- * if needed by adding cpu-specific defines to identify blocks
- * (see mach-pxa/include/mach/gpio.h as an example using GPLR etc)
- */
-#define gpio_get_value  __gpio_get_value
-#define gpio_set_value  __gpio_set_value
-#define gpio_cansleep   __gpio_cansleep
-#define gpio_to_irq     __gpio_to_irq
-
-/*
- * "nmk_gpio" and "NMK_GPIO" stand for "Nomadik GPIO", leaving
- * the "gpio" namespace for generic and cross-machine functions
- */
-
-/* Register in the logic block */
-#define NMK_GPIO_DAT	0x00
-#define NMK_GPIO_DATS	0x04
-#define NMK_GPIO_DATC	0x08
-#define NMK_GPIO_PDIS	0x0c
-#define NMK_GPIO_DIR	0x10
-#define NMK_GPIO_DIRS	0x14
-#define NMK_GPIO_DIRC	0x18
-#define NMK_GPIO_SLPC	0x1c
-#define NMK_GPIO_AFSLA	0x20
-#define NMK_GPIO_AFSLB	0x24
-
-#define NMK_GPIO_RIMSC	0x40
-#define NMK_GPIO_FIMSC	0x44
-#define NMK_GPIO_IS	0x48
-#define NMK_GPIO_IC	0x4c
-#define NMK_GPIO_RWIMSC	0x50
-#define NMK_GPIO_FWIMSC	0x54
-#define NMK_GPIO_WKS	0x58
-
-/* Alternate functions: function C is set in hw by setting both A and B */
-#define NMK_GPIO_ALT_GPIO	0
-#define NMK_GPIO_ALT_A	1
-#define NMK_GPIO_ALT_B	2
-#define NMK_GPIO_ALT_C	(NMK_GPIO_ALT_A | NMK_GPIO_ALT_B)
-
-extern int nmk_gpio_set_mode(int gpio, int gpio_mode);
-extern int nmk_gpio_get_mode(int gpio);
-
-/*
- * Platform data to register a block: only the initial gpio/irq number.
- */
-struct nmk_gpio_platform_data {
-	char *name;
-	int first_gpio;
-	int first_irq;
-	int parent_irq;
-};
+#include <plat/gpio.h>
 
 #endif /* __ASM_ARCH_GPIO_H */

arch/arm/mach-omap1/board-htcherald.c

@@ -28,7 +28,6 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/input.h>
-#include <linux/bootmem.h>
 #include <linux/io.h>
 #include <linux/gpio.h>
 

arch/arm/mach-omap2/devices.c

@@ -17,8 +17,10 @@
 #include <linux/clk.h>
 
 #include <mach/hardware.h>
+#include <mach/irqs.h>
 #include <asm/mach-types.h>
 #include <asm/mach/map.h>
+#include <asm/pmu.h>
 
 #include <plat/control.h>
 #include <plat/tc.h>
@@ -453,6 +455,37 @@ static void omap_init_mcspi(void)
 static inline void omap_init_mcspi(void) {}
 #endif
 
+static struct resource omap2_pmu_resource = {
+	.start	= 3,
+	.end	= 3,
+	.flags	= IORESOURCE_IRQ,
+};
+
+static struct resource omap3_pmu_resource = {
+	.start	= INT_34XX_BENCH_MPU_EMUL,
+	.end	= INT_34XX_BENCH_MPU_EMUL,
+	.flags	= IORESOURCE_IRQ,
+};
+
+static struct platform_device omap_pmu_device = {
+	.name		= "arm-pmu",
+	.id		= ARM_PMU_DEVICE_CPU,
+	.num_resources	= 1,
+};
+
+static void omap_init_pmu(void)
+{
+	if (cpu_is_omap24xx())
+		omap_pmu_device.resource = &omap2_pmu_resource;
+	else if (cpu_is_omap34xx())
+		omap_pmu_device.resource = &omap3_pmu_resource;
+	else
+		return;
+
+	platform_device_register(&omap_pmu_device);
+}
+
+
 #ifdef CONFIG_OMAP_SHA1_MD5
 static struct resource sha1_md5_resources[] = {
 	{
@@ -797,6 +830,7 @@ static int __init omap2_init_devices(void)
 	omap_init_camera();
 	omap_init_mbox();
 	omap_init_mcspi();
+	omap_init_pmu();
 	omap_hdq_init();
 	omap_init_sti();
 	omap_init_sha1_md5();

arch/arm/mach-omap2/omap_hwmod.c

@@ -43,7 +43,6 @@
 #include <linux/err.h>
 #include <linux/list.h>
 #include <linux/mutex.h>
-#include <linux/bootmem.h>
 
 #include <plat/common.h>
 #include <plat/cpu.h>

arch/arm/mach-realview/Makefile

@@ -2,7 +2,7 @@
 # Makefile for the linux kernel.
 #
 
-obj-y					:= core.o clock.o
+obj-y					:= core.o
 obj-$(CONFIG_MACH_REALVIEW_EB)		+= realview_eb.o
 obj-$(CONFIG_MACH_REALVIEW_PB11MP)	+= realview_pb11mp.o
 obj-$(CONFIG_MACH_REALVIEW_PB1176)	+= realview_pb1176.o

arch/arm/mach-realview/clock.c

@@ -1,64 +0,0 @@
-/*
- *  linux/arch/arm/mach-realview/clock.c
- *
- *  Copyright (C) 2004 ARM Limited.
- *  Written by Deep Blue Solutions Limited.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/device.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/string.h>
-#include <linux/clk.h>
-#include <linux/mutex.h>
-
-#include <asm/hardware/icst307.h>
-
-#include "clock.h"
-
-int clk_enable(struct clk *clk)
-{
-	return 0;
-}
-EXPORT_SYMBOL(clk_enable);
-
-void clk_disable(struct clk *clk)
-{
-}
-EXPORT_SYMBOL(clk_disable);
-
-unsigned long clk_get_rate(struct clk *clk)
-{
-	return clk->rate;
-}
-EXPORT_SYMBOL(clk_get_rate);
-
-long clk_round_rate(struct clk *clk, unsigned long rate)
-{
-	struct icst307_vco vco;
-	vco = icst307_khz_to_vco(clk->params, rate / 1000);
-	return icst307_khz(clk->params, vco) * 1000;
-}
-EXPORT_SYMBOL(clk_round_rate);
-
-int clk_set_rate(struct clk *clk, unsigned long rate)
-{
-	int ret = -EIO;
-
-	if (clk->setvco) {
-		struct icst307_vco vco;
-
-		vco = icst307_khz_to_vco(clk->params, rate / 1000);
-		clk->rate = icst307_khz(clk->params, vco) * 1000;
-		clk->setvco(clk, vco);
-		ret = 0;
-	}
-	return ret;
-}
-EXPORT_SYMBOL(clk_set_rate);

arch/arm/mach-realview/clock.h

@@ -1,19 +0,0 @@
-/*
- *  linux/arch/arm/mach-realview/clock.h
- *
- *  Copyright (C) 2004 ARM Limited.
- *  Written by Deep Blue Solutions Limited.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-struct module;
-struct icst307_params;
-
-struct clk {
-	unsigned long		rate;
-	const struct icst307_params *params;
-	void			*data;
-	void			(*setvco)(struct clk *, struct icst307_vco vco);
-};

arch/arm/mach-realview/core.c

@@ -25,8 +25,6 @@
 #include <linux/interrupt.h>
 #include <linux/amba/bus.h>
 #include <linux/amba/clcd.h>
-#include <linux/clocksource.h>
-#include <linux/clockchips.h>
 #include <linux/io.h>
 #include <linux/smsc911x.h>
 #include <linux/ata_platform.h>
@@ -39,7 +37,7 @@
 #include <asm/leds.h>
 #include <asm/mach-types.h>
 #include <asm/hardware/arm_timer.h>
-#include <asm/hardware/icst307.h>
+#include <asm/hardware/icst.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
@@ -48,13 +46,12 @@
 
 #include <asm/hardware/gic.h>
 
+#include <mach/clkdev.h>
 #include <mach/platform.h>
 #include <mach/irqs.h>
+#include <plat/timer-sp.h>
 
 #include "core.h"
-#include "clock.h"
-
-#define REALVIEW_REFCOUNTER	(__io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_24MHz_OFFSET)
 
 /* used by entry-macro.S and platsmp.c */
 void __iomem *gic_cpu_base_addr;
@@ -78,20 +75,6 @@ void __init realview_adjust_zones(int node, unsigned long *size,
 }
 #endif
 
-/*
- * This is the RealView sched_clock implementation.  This has
- * a resolution of 41.7ns, and a maximum value of about 179s.
- */
-unsigned long long sched_clock(void)
-{
-	unsigned long long v;
-
-	v = (unsigned long long)readl(REALVIEW_REFCOUNTER) * 125;
-	do_div(v, 3);
-
-	return v;
-}
-
 
 #define REALVIEW_FLASHCTRL    (__io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_FLASH_OFFSET)
 
@@ -273,37 +256,40 @@ struct mmci_platform_data realview_mmc1_plat_data = {
 /*
  * Clock handling
  */
-static const struct icst307_params realview_oscvco_params = {
-	.ref		= 24000,
-	.vco_max	= 200000,
+static const struct icst_params realview_oscvco_params = {
+	.ref		= 24000000,
+	.vco_max	= ICST307_VCO_MAX,
+	.vco_min	= ICST307_VCO_MIN,
 	.vd_min		= 4 + 8,
 	.vd_max		= 511 + 8,
 	.rd_min		= 1 + 2,
 	.rd_max		= 127 + 2,
+	.s2div		= icst307_s2div,
+	.idx2s		= icst307_idx2s,
 };
 
-static void realview_oscvco_set(struct clk *clk, struct icst307_vco vco)
+static void realview_oscvco_set(struct clk *clk, struct icst_vco vco)
 {
 	void __iomem *sys_lock = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_LOCK_OFFSET;
-	void __iomem *sys_osc;
 	u32 val;
 
-	if (machine_is_realview_pb1176())
-		sys_osc = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_OSC0_OFFSET;
-	else
-		sys_osc = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_OSC4_OFFSET;
-
-	val = readl(sys_osc) & ~0x7ffff;
+	val = readl(clk->vcoreg) & ~0x7ffff;
 	val |= vco.v | (vco.r << 9) | (vco.s << 16);
 
 	writel(0xa05f, sys_lock);
-	writel(val, sys_osc);
+	writel(val, clk->vcoreg);
 	writel(0, sys_lock);
 }
 
+static const struct clk_ops oscvco_clk_ops = {
+	.round	= icst_clk_round,
+	.set	= icst_clk_set,
+	.setvco	= realview_oscvco_set,
+};
+
 static struct clk oscvco_clk = {
+	.ops	= &oscvco_clk_ops,
 	.params	= &realview_oscvco_params,
-	.setvco = realview_oscvco_set,
 };
 
 /*
@@ -346,7 +332,13 @@ static struct clk_lookup lookups[] = {
 
 static int __init clk_init(void)
 {
+	if (machine_is_realview_pb1176())
+		oscvco_clk.vcoreg = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_OSC0_OFFSET;
+	else
+		oscvco_clk.vcoreg = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_OSC4_OFFSET;
+
 	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
+
 	return 0;
 }
 arch_initcall(clk_init);
@@ -642,133 +634,6 @@ void __iomem *timer1_va_base;
 void __iomem *timer2_va_base;
 void __iomem *timer3_va_base;
 
-/*
- * How long is the timer interval?
- */
-#define TIMER_INTERVAL	(TICKS_PER_uSEC * mSEC_10)
-#if TIMER_INTERVAL >= 0x100000
-#define TIMER_RELOAD	(TIMER_INTERVAL >> 8)
-#define TIMER_DIVISOR	(TIMER_CTRL_DIV256)
-#define TICKS2USECS(x)	(256 * (x) / TICKS_PER_uSEC)
-#elif TIMER_INTERVAL >= 0x10000
-#define TIMER_RELOAD	(TIMER_INTERVAL >> 4)		/* Divide by 16 */
-#define TIMER_DIVISOR	(TIMER_CTRL_DIV16)
-#define TICKS2USECS(x)	(16 * (x) / TICKS_PER_uSEC)
-#else
-#define TIMER_RELOAD	(TIMER_INTERVAL)
-#define TIMER_DIVISOR	(TIMER_CTRL_DIV1)
-#define TICKS2USECS(x)	((x) / TICKS_PER_uSEC)
-#endif
-
-static void timer_set_mode(enum clock_event_mode mode,
-			   struct clock_event_device *clk)
-{
-	unsigned long ctrl;
-
-	switch(mode) {
-	case CLOCK_EVT_MODE_PERIODIC:
-		writel(TIMER_RELOAD, timer0_va_base + TIMER_LOAD);
-
-		ctrl = TIMER_CTRL_PERIODIC;
-		ctrl |= TIMER_CTRL_32BIT | TIMER_CTRL_IE | TIMER_CTRL_ENABLE;
-		break;
-	case CLOCK_EVT_MODE_ONESHOT:
-		/* period set, and timer enabled in 'next_event' hook */
-		ctrl = TIMER_CTRL_ONESHOT;
-		ctrl |= TIMER_CTRL_32BIT | TIMER_CTRL_IE;
-		break;
-	case CLOCK_EVT_MODE_UNUSED:
-	case CLOCK_EVT_MODE_SHUTDOWN:
-	default:
-		ctrl = 0;
-	}
-
-	writel(ctrl, timer0_va_base + TIMER_CTRL);
-}
-
-static int timer_set_next_event(unsigned long evt,
-				struct clock_event_device *unused)
-{
-	unsigned long ctrl = readl(timer0_va_base + TIMER_CTRL);
-
-	writel(evt, timer0_va_base + TIMER_LOAD);
-	writel(ctrl | TIMER_CTRL_ENABLE, timer0_va_base + TIMER_CTRL);
-
-	return 0;
-}
-
-static struct clock_event_device timer0_clockevent =	 {
-	.name		= "timer0",
-	.shift		= 32,
-	.features       = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
-	.set_mode	= timer_set_mode,
-	.set_next_event	= timer_set_next_event,
-	.rating		= 300,
-	.cpumask	= cpu_all_mask,
-};
-
-static void __init realview_clockevents_init(unsigned int timer_irq)
-{
-	timer0_clockevent.irq = timer_irq;
-	timer0_clockevent.mult =
-		div_sc(1000000, NSEC_PER_SEC, timer0_clockevent.shift);
-	timer0_clockevent.max_delta_ns =
-		clockevent_delta2ns(0xffffffff, &timer0_clockevent);
-	timer0_clockevent.min_delta_ns =
-		clockevent_delta2ns(0xf, &timer0_clockevent);
-
-	clockevents_register_device(&timer0_clockevent);
-}
-
-/*
- * IRQ handler for the timer
- */
-static irqreturn_t realview_timer_interrupt(int irq, void *dev_id)
-{
-	struct clock_event_device *evt = &timer0_clockevent;
-
-	/* clear the interrupt */
-	writel(1, timer0_va_base + TIMER_INTCLR);
-
-	evt->event_handler(evt);
-
-	return IRQ_HANDLED;
-}
-
-static struct irqaction realview_timer_irq = {
-	.name		= "RealView Timer Tick",
-	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
-	.handler	= realview_timer_interrupt,
-};
-
-static cycle_t realview_get_cycles(struct clocksource *cs)
-{
-	return ~readl(timer3_va_base + TIMER_VALUE);
-}
-
-static struct clocksource clocksource_realview = {
-	.name	= "timer3",
-	.rating	= 200,
-	.read	= realview_get_cycles,
-	.mask	= CLOCKSOURCE_MASK(32),
-	.shift	= 20,
-	.flags	= CLOCK_SOURCE_IS_CONTINUOUS,
-};
-
-static void __init realview_clocksource_init(void)
-{
-	/* setup timer 0 as free-running clocksource */
-	writel(0, timer3_va_base + TIMER_CTRL);
-	writel(0xffffffff, timer3_va_base + TIMER_LOAD);
-	writel(0xffffffff, timer3_va_base + TIMER_VALUE);
-	writel(TIMER_CTRL_32BIT | TIMER_CTRL_ENABLE | TIMER_CTRL_PERIODIC,
-		timer3_va_base + TIMER_CTRL);
-
-	clocksource_realview.mult =
-		clocksource_khz2mult(1000, clocksource_realview.shift);
-	clocksource_register(&clocksource_realview);
-}
-
 /*
  * Set up the clock source and clock events devices
  */
@@ -796,13 +661,8 @@ void __init realview_timer_init(unsigned int timer_irq)
 	writel(0, timer2_va_base + TIMER_CTRL);
 	writel(0, timer3_va_base + TIMER_CTRL);
 
-	/* 
-	 * Make irqs happen for the system timer
-	 */
-	setup_irq(timer_irq, &realview_timer_irq);
-
-	realview_clocksource_init();
-	realview_clockevents_init(timer_irq);
+	sp804_clocksource_init(timer3_va_base);
+	sp804_clockevents_init(timer0_va_base, timer_irq);
 }
 
 /*

arch/arm/mach-realview/hotplug.c

@@ -131,7 +131,7 @@ void platform_cpu_die(unsigned int cpu)
 	cpu_leave_lowpower();
 }
 
-int mach_cpu_disable(unsigned int cpu)
+int platform_cpu_disable(unsigned int cpu)
 {
 	/*
 	 * we don't allow CPU 0 to be shutdown (it is still too special

arch/arm/mach-realview/include/mach/clkdev.h

@@ -1,6 +1,15 @@
 #ifndef __ASM_MACH_CLKDEV_H
 #define __ASM_MACH_CLKDEV_H
 
+#include <plat/clock.h>
+
+struct clk {
+	unsigned long		rate;
+	const struct clk_ops	*ops;
+	const struct icst_params *params;
+	void __iomem		*vcoreg;
+};
+
 #define __clk_get(clk) ({ 1; })
 #define __clk_put(clk) do { } while (0)
 

arch/arm/mach-realview/include/mach/irqs-pb1176.h

@@ -31,6 +31,7 @@
 #define IRQ_DC1176_SOFTINT	(IRQ_DC1176_GIC_START + 1)	/* Software interrupt */
 #define IRQ_DC1176_COMMRx	(IRQ_DC1176_GIC_START + 2)	/* Debug Comm Rx interrupt */
 #define IRQ_DC1176_COMMTx	(IRQ_DC1176_GIC_START + 3)	/* Debug Comm Tx interrupt */
+#define IRQ_DC1176_CORE_PMU	(IRQ_DC1176_GIC_START + 7)	/* Core PMU interrupt */
 #define IRQ_DC1176_TIMER0	(IRQ_DC1176_GIC_START + 8)	/* Timer 0 */
 #define IRQ_DC1176_TIMER1	(IRQ_DC1176_GIC_START + 9)	/* Timer 1 */
 #define IRQ_DC1176_TIMER2	(IRQ_DC1176_GIC_START + 10)	/* Timer 2 */

arch/arm/mach-realview/include/mach/irqs-pba8.h

@@ -23,12 +23,6 @@
 
 #define IRQ_PBA8_GIC_START			32
 
-/* L220
-#define IRQ_PBA8_L220_EVENT	(IRQ_PBA8_GIC_START + 29)
-#define IRQ_PBA8_L220_SLAVE	(IRQ_PBA8_GIC_START + 30)
-#define IRQ_PBA8_L220_DECODE	(IRQ_PBA8_GIC_START + 31)
-*/
-
 /*
  * PB-A8 on-board gic irq sources
  */
@@ -65,6 +59,8 @@
 #define IRQ_PBA8_TSPEN		(IRQ_PBA8_GIC_START + 30)	/* Touchscreen pen */
 #define IRQ_PBA8_TSKPAD		(IRQ_PBA8_GIC_START + 31)	/* Touchscreen keypad */
 
+#define IRQ_PBA8_PMU		(IRQ_PBA8_GIC_START + 47)	/* Cortex-A8 PMU */
+
 /* ... */
 #define IRQ_PBA8_PCI0		(IRQ_PBA8_GIC_START + 50)
 #define IRQ_PBA8_PCI1		(IRQ_PBA8_GIC_START + 51)

arch/arm/mach-realview/include/mach/irqs-pbx.h

@@ -22,12 +22,6 @@
 
 #define IRQ_PBX_GIC_START			32
 
-/* L220
-#define IRQ_PBX_L220_EVENT	(IRQ_PBX_GIC_START + 29)
-#define IRQ_PBX_L220_SLAVE	(IRQ_PBX_GIC_START + 30)
-#define IRQ_PBX_L220_DECODE	(IRQ_PBX_GIC_START + 31)
-*/
-
 /*
  * PBX on-board gic irq sources
  */
@@ -77,10 +71,10 @@
 #define IRQ_PBX_TIMER4_5        (IRQ_PBX_GIC_START + 41)        /* Timer 0/1 (default timer) */
 #define IRQ_PBX_TIMER6_7        (IRQ_PBX_GIC_START + 42)        /* Timer 2/3 */
 /* ... */
-#define IRQ_PBX_PMU_CPU3        (IRQ_PBX_GIC_START + 44)        /* CPU PMU Interrupts */
-#define IRQ_PBX_PMU_CPU2        (IRQ_PBX_GIC_START + 45)
-#define IRQ_PBX_PMU_CPU1        (IRQ_PBX_GIC_START + 46)
-#define IRQ_PBX_PMU_CPU0        (IRQ_PBX_GIC_START + 47)
+#define IRQ_PBX_PMU_CPU0        (IRQ_PBX_GIC_START + 44)        /* CPU PMU Interrupts */
+#define IRQ_PBX_PMU_CPU1        (IRQ_PBX_GIC_START + 45)
+#define IRQ_PBX_PMU_CPU2        (IRQ_PBX_GIC_START + 46)
+#define IRQ_PBX_PMU_CPU3        (IRQ_PBX_GIC_START + 47)
 
 /* ... */
 #define IRQ_PBX_PCI0		(IRQ_PBX_GIC_START + 50)

arch/arm/mach-realview/include/mach/platform.h

@@ -231,12 +231,6 @@
 #define REALVIEW_INTREG_OFFSET		0x8	/* Interrupt control */
 #define REALVIEW_DECODE_OFFSET		0xC	/* Fitted logic modules */
 
-/* 
- *  Clean base - dummy
- * 
- */
-#define CLEAN_BASE                      REALVIEW_BOOT_ROM_HI
-
 /*
  * System controller bit assignment
  */
@@ -249,20 +243,6 @@
 #define REALVIEW_TIMER4_EnSel	21
 
 
-#define MAX_TIMER                       2
-#define MAX_PERIOD                      699050
-#define TICKS_PER_uSEC                  1
-
-/* 
- *  These are useconds NOT ticks.  
- * 
- */
-#define mSEC_1                          1000
-#define mSEC_5                          (mSEC_1 * 5)
-#define mSEC_10                         (mSEC_1 * 10)
-#define mSEC_25                         (mSEC_1 * 25)
-#define SEC_1                           (mSEC_1 * 1000)
-
 #define REALVIEW_CSR_BASE             0x10000000
 #define REALVIEW_CSR_SIZE             0x10000000
 

arch/arm/mach-realview/realview_eb.c

@@ -31,8 +31,8 @@
 #include <asm/irq.h>
 #include <asm/leds.h>
 #include <asm/mach-types.h>
+#include <asm/pmu.h>
 #include <asm/hardware/gic.h>
-#include <asm/hardware/icst307.h>
 #include <asm/hardware/cache-l2x0.h>
 #include <asm/localtimer.h>
 
@@ -44,7 +44,6 @@
 #include <mach/irqs.h>
 
 #include "core.h"
-#include "clock.h"
 
 static struct map_desc realview_eb_io_desc[] __initdata = {
 	{
@@ -294,6 +293,36 @@ static struct resource realview_eb_isp1761_resources[] = {
 	},
 };
 
+static struct resource pmu_resources[] = {
+	[0] = {
+		.start		= IRQ_EB11MP_PMU_CPU0,
+		.end		= IRQ_EB11MP_PMU_CPU0,
+		.flags		= IORESOURCE_IRQ,
+	},
+	[1] = {
+		.start		= IRQ_EB11MP_PMU_CPU1,
+		.end		= IRQ_EB11MP_PMU_CPU1,
+		.flags		= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start		= IRQ_EB11MP_PMU_CPU2,
+		.end		= IRQ_EB11MP_PMU_CPU2,
+		.flags		= IORESOURCE_IRQ,
+	},
+	[3] = {
+		.start		= IRQ_EB11MP_PMU_CPU3,
+		.end		= IRQ_EB11MP_PMU_CPU3,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device pmu_device = {
+	.name			= "arm-pmu",
+	.id			= ARM_PMU_DEVICE_CPU,
+	.num_resources		= ARRAY_SIZE(pmu_resources),
+	.resource		= pmu_resources,
+};
+
 static void __init gic_init_irq(void)
 {
 	if (core_tile_eb11mp() || core_tile_a9mp()) {
@@ -407,6 +436,7 @@ static void __init realview_eb_init(void)
 		 * Bits:  .... ...0 0111 1001 0000 .... .... .... */
 		l2x0_init(__io_address(REALVIEW_EB11MP_L220_BASE), 0x00790000, 0xfe000fff);
 #endif
+		platform_device_register(&pmu_device);
 	}
 
 	realview_flash_register(&realview_eb_flash_resource, 1);

arch/arm/mach-realview/realview_pb1176.c

@@ -31,8 +31,8 @@
 #include <asm/irq.h>
 #include <asm/leds.h>
 #include <asm/mach-types.h>
+#include <asm/pmu.h>
 #include <asm/hardware/gic.h>
-#include <asm/hardware/icst307.h>
 #include <asm/hardware/cache-l2x0.h>
 
 #include <asm/mach/arch.h>
@@ -44,7 +44,6 @@
 #include <mach/irqs.h>
 
 #include "core.h"
-#include "clock.h"
 
 static struct map_desc realview_pb1176_io_desc[] __initdata = {
 	{
@@ -263,6 +262,19 @@ static struct resource realview_pb1176_isp1761_resources[] = {
 	},
 };
 
+static struct resource pmu_resource = {
+	.start		= IRQ_DC1176_CORE_PMU,
+	.end		= IRQ_DC1176_CORE_PMU,
+	.flags		= IORESOURCE_IRQ,
+};
+
+static struct platform_device pmu_device = {
+	.name			= "arm-pmu",
+	.id			= ARM_PMU_DEVICE_CPU,
+	.num_resources		= 1,
+	.resource		= &pmu_resource,
+};
+
 static void __init gic_init_irq(void)
 {
 	/* ARM1176 DevChip GIC, primary */
@@ -324,6 +336,7 @@ static void __init realview_pb1176_init(void)
 	realview_eth_register(NULL, realview_pb1176_smsc911x_resources);
 	platform_device_register(&realview_i2c_device);
 	realview_usb_register(realview_pb1176_isp1761_resources);
+	platform_device_register(&pmu_device);
 
 	for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
 		struct amba_device *d = amba_devs[i];

arch/arm/mach-realview/realview_pb11mp.c

@@ -31,8 +31,8 @@
 #include <asm/irq.h>
 #include <asm/leds.h>
 #include <asm/mach-types.h>
+#include <asm/pmu.h>
 #include <asm/hardware/gic.h>
-#include <asm/hardware/icst307.h>
 #include <asm/hardware/cache-l2x0.h>
 #include <asm/localtimer.h>
 
@@ -45,7 +45,6 @@
 #include <mach/irqs.h>
 
 #include "core.h"
-#include "clock.h"
 
 static struct map_desc realview_pb11mp_io_desc[] __initdata = {
 	{
@@ -260,6 +259,36 @@ static struct resource realview_pb11mp_isp1761_resources[] = {
 	},
 };
 
+static struct resource pmu_resources[] = {
+	[0] = {
+		.start		= IRQ_TC11MP_PMU_CPU0,
+		.end		= IRQ_TC11MP_PMU_CPU0,
+		.flags		= IORESOURCE_IRQ,
+	},
+	[1] = {
+		.start		= IRQ_TC11MP_PMU_CPU1,
+		.end		= IRQ_TC11MP_PMU_CPU1,
+		.flags		= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start		= IRQ_TC11MP_PMU_CPU2,
+		.end		= IRQ_TC11MP_PMU_CPU2,
+		.flags		= IORESOURCE_IRQ,
+	},
+	[3] = {
+		.start		= IRQ_TC11MP_PMU_CPU3,
+		.end		= IRQ_TC11MP_PMU_CPU3,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device pmu_device = {
+	.name			= "arm-pmu",
+	.id			= ARM_PMU_DEVICE_CPU,
+	.num_resources		= ARRAY_SIZE(pmu_resources),
+	.resource		= pmu_resources,
+};
+
 static void __init gic_init_irq(void)
 {
 	unsigned int pldctrl;
@@ -329,6 +358,7 @@ static void __init realview_pb11mp_init(void)
 	platform_device_register(&realview_i2c_device);
 	platform_device_register(&realview_cf_device);
 	realview_usb_register(realview_pb11mp_isp1761_resources);
+	platform_device_register(&pmu_device);
 
 	for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
 		struct amba_device *d = amba_devs[i];

arch/arm/mach-realview/realview_pba8.c

@@ -30,8 +30,8 @@
 #include <asm/irq.h>
 #include <asm/leds.h>
 #include <asm/mach-types.h>
+#include <asm/pmu.h>
 #include <asm/hardware/gic.h>
-#include <asm/hardware/icst307.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -42,7 +42,6 @@
 #include <mach/irqs.h>
 
 #include "core.h"
-#include "clock.h"
 
 static struct map_desc realview_pba8_io_desc[] __initdata = {
 	{
@@ -250,6 +249,19 @@ static struct resource realview_pba8_isp1761_resources[] = {
 	},
 };
 
+static struct resource pmu_resource = {
+	.start		= IRQ_PBA8_PMU,
+	.end		= IRQ_PBA8_PMU,
+	.flags		= IORESOURCE_IRQ,
+};
+
+static struct platform_device pmu_device = {
+	.name			= "arm-pmu",
+	.id			= ARM_PMU_DEVICE_CPU,
+	.num_resources		= 1,
+	.resource		= &pmu_resource,
+};
+
 static void __init gic_init_irq(void)
 {
 	/* ARM PB-A8 on-board GIC */
@@ -296,6 +308,7 @@ static void __init realview_pba8_init(void)
 	platform_device_register(&realview_i2c_device);
 	platform_device_register(&realview_cf_device);
 	realview_usb_register(realview_pba8_isp1761_resources);
+	platform_device_register(&pmu_device);
 
 	for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
 		struct amba_device *d = amba_devs[i];

arch/arm/mach-realview/realview_pbx.c

@@ -29,6 +29,7 @@
 #include <asm/irq.h>
 #include <asm/leds.h>
 #include <asm/mach-types.h>
+#include <asm/pmu.h>
 #include <asm/smp_twd.h>
 #include <asm/hardware/gic.h>
 #include <asm/hardware/cache-l2x0.h>
@@ -270,6 +271,36 @@ static struct resource realview_pbx_isp1761_resources[] = {
 	},
 };
 
+static struct resource pmu_resources[] = {
+	[0] = {
+		.start		= IRQ_PBX_PMU_CPU0,
+		.end		= IRQ_PBX_PMU_CPU0,
+		.flags		= IORESOURCE_IRQ,
+	},
+	[1] = {
+		.start		= IRQ_PBX_PMU_CPU1,
+		.end		= IRQ_PBX_PMU_CPU1,
+		.flags		= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start		= IRQ_PBX_PMU_CPU2,
+		.end		= IRQ_PBX_PMU_CPU2,
+		.flags		= IORESOURCE_IRQ,
+	},
+	[3] = {
+		.start		= IRQ_PBX_PMU_CPU3,
+		.end		= IRQ_PBX_PMU_CPU3,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device pmu_device = {
+	.name			= "arm-pmu",
+	.id			= ARM_PMU_DEVICE_CPU,
+	.num_resources		= ARRAY_SIZE(pmu_resources),
+	.resource		= pmu_resources,
+};
+
 static void __init gic_init_irq(void)
 {
 	/* ARM PBX on-board GIC */
@@ -354,6 +385,7 @@ static void __init realview_pbx_init(void)
 		/* 16KB way size, 8-way associativity, parity disabled
 		 * Bits:  .. 0 0 0 0 1 00 1 0 1 001 0 000 0 .... .... .... */
 		l2x0_init(l2x0_base, 0x02520000, 0xc0000fff);
+		platform_device_register(&pmu_device);
 	}
 #endif
 

arch/arm/mach-spear3xx/Kconfig

@@ -0,0 +1,33 @@
+#
+# SPEAr3XX Machine configuration file
+#
+
+if ARCH_SPEAR3XX
+
+choice
+	prompt "SPEAr3XX Family"
+	default MACH_SPEAR300
+
+config MACH_SPEAR300
+	bool "SPEAr300"
+	help
+	  Supports ST SPEAr300 Machine
+
+config MACH_SPEAR310
+	bool "SPEAr310"
+	help
+	  Supports ST SPEAr310 Machine
+
+config MACH_SPEAR320
+	bool "SPEAr320"
+	help
+	  Supports ST SPEAr320 Machine
+
+endchoice
+
+# Adding SPEAr3XX machine specific configuration files
+source "arch/arm/mach-spear3xx/Kconfig300"
+source "arch/arm/mach-spear3xx/Kconfig310"
+source "arch/arm/mach-spear3xx/Kconfig320"
+
+endif #ARCH_SPEAR3XX

arch/arm/mach-spear3xx/Kconfig300

@@ -0,0 +1,17 @@
+#
+# SPEAr300 machine configuration file
+#
+
+if MACH_SPEAR300
+
+choice
+	prompt "SPEAr300 Boards"
+	default BOARD_SPEAR300_EVB
+
+config BOARD_SPEAR300_EVB
+	bool "SPEAr300 Evaluation Board"
+	help
+	  Supports ST SPEAr300 Evaluation Board
+endchoice
+
+endif	#MACH_SPEAR300

arch/arm/mach-spear3xx/Kconfig310

@@ -0,0 +1,17 @@
+#
+# SPEAr310 machine configuration file
+#
+
+if MACH_SPEAR310
+
+choice
+	prompt "SPEAr310 Boards"
+	default BOARD_SPEAR310_EVB
+
+config BOARD_SPEAR310_EVB
+	bool "SPEAr310 Evaluation Board"
+	help
+	  Supports ST SPEAr310 Evaluation Board
+endchoice
+
+endif	#MACH_SPEAR310

arch/arm/mach-spear3xx/Kconfig320

@@ -0,0 +1,17 @@
+#
+# SPEAr320 machine configuration file
+#
+
+if MACH_SPEAR320
+
+choice
+	prompt "SPEAr320 Boards"
+	default BOARD_SPEAR320_EVB
+
+config BOARD_SPEAR320_EVB
+	bool "SPEAr320 Evaluation Board"
+	help
+	  Supports ST SPEAr320 Evaluation Board
+endchoice
+
+endif	#MACH_SPEAR320

arch/arm/mach-spear3xx/Makefile

@@ -0,0 +1,26 @@
+#
+# Makefile for SPEAr3XX machine series
+#
+
+# common files
+obj-y	+= spear3xx.o clock.o
+
+# spear300 specific files
+obj-$(CONFIG_MACH_SPEAR300) += spear300.o
+
+# spear300 boards files
+obj-$(CONFIG_BOARD_SPEAR300_EVB) += spear300_evb.o
+
+
+# spear310 specific files
+obj-$(CONFIG_MACH_SPEAR310) += spear310.o
+
+# spear310 boards files
+obj-$(CONFIG_BOARD_SPEAR310_EVB) += spear310_evb.o
+
+
+# spear320 specific files
+obj-$(CONFIG_MACH_SPEAR320) += spear320.o
+
+# spear320 boards files
+obj-$(CONFIG_BOARD_SPEAR320_EVB) += spear320_evb.o

arch/arm/mach-spear3xx/Makefile.boot

@@ -0,0 +1,3 @@
+zreladdr-y	:= 0x00008000
+params_phys-y	:= 0x00000100
+initrd_phys-y	:= 0x00800000