Merge tag 'renesas-soc-for-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/soc

Pull "Renesas ARM Based SoC Soc Updates for v3.19" from Simon Horman:

* Select CONFIG_ZONE_DMA when CONFIG_ARM_LPAE is enabled
* Add CA7 arch_timer initialization for r8a7794
* Handle CA7 arch timer delay
* Add shmobile_init_late() to sh7372
  - This is consistent with other shmobile SoCs

* tag 'renesas-soc-for-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  ARM: shmobile: Select CONFIG_ZONE_DMA when CONFIG_ARM_LPAE is enabled
  ARM: shmobile: rcar-gen2: Add CA7 arch_timer initialization for r8a7794
  ARM: shmobile: sh7372: Add shmobile_init_late()
  ARM: shmobile: Handle CA7 arch timer delay

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

arch/arm/mach-shmobile/Kconfig

@@ -1,5 +1,6 @@
 config ARCH_SHMOBILE
 	bool
+	select ZONE_DMA if ARM_LPAE
 
 config PM_RCAR
 	bool

arch/arm/mach-shmobile/setup-rcar-gen2.c

@@ -3,6 +3,7 @@
  *
  * Copyright (C) 2013  Renesas Solutions Corp.
  * Copyright (C) 2013  Magnus Damm
+ * Copyright (C) 2014  Ulrich Hecht
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -24,6 +25,7 @@
 #include <linux/dma-contiguous.h>
 #include <linux/io.h>
 #include <linux/kernel.h>
+#include <linux/of.h>
 #include <linux/of_fdt.h>
 #include <asm/mach/arch.h>
 #include "common.h"
@@ -54,37 +56,61 @@ void __init rcar_gen2_timer_init(void)
 {
 #if defined(CONFIG_ARM_ARCH_TIMER) || defined(CONFIG_COMMON_CLK)
 	u32 mode = rcar_gen2_read_mode_pins();
+	bool is_e2 = (bool)of_find_compatible_node(NULL, NULL,
+		"renesas,r8a7794");
 #endif
 #ifdef CONFIG_ARM_ARCH_TIMER
 	void __iomem *base;
 	int extal_mhz = 0;
 	u32 freq;
 
-	/* At Linux boot time the r8a7790 arch timer comes up
-	 * with the counter disabled. Moreover, it may also report
-	 * a potentially incorrect fixed 13 MHz frequency. To be
-	 * correct these registers need to be updated to use the
-	 * frequency EXTAL / 2 which can be determined by the MD pins.
-	 */
-
-	switch (mode & (MD(14) | MD(13))) {
-	case 0:
-		extal_mhz = 15;
-		break;
-	case MD(13):
-		extal_mhz = 20;
-		break;
-	case MD(14):
-		extal_mhz = 26;
-		break;
-	case MD(13) | MD(14):
-		extal_mhz = 30;
-		break;
+	if (is_e2) {
+		freq = 260000000 / 8;	/* ZS / 8 */
+		/* CNTVOFF has to be initialized either from non-secure
+		 * Hypervisor mode or secure Monitor mode with SCR.NS==1.
+		 * If TrustZone is enabled then it should be handled by the
+		 * secure code.
+		 */
+		asm volatile(
+		"	cps	0x16\n"
+		"	mrc	p15, 0, r1, c1, c1, 0\n"
+		"	orr	r0, r1, #1\n"
+		"	mcr	p15, 0, r0, c1, c1, 0\n"
+		"	isb\n"
+		"	mov	r0, #0\n"
+		"	mcrr	p15, 4, r0, r0, c14\n"
+		"	isb\n"
+		"	mcr	p15, 0, r1, c1, c1, 0\n"
+		"	isb\n"
+		"	cps	0x13\n"
+			: : : "r0", "r1");
+	} else {
+		/* At Linux boot time the r8a7790 arch timer comes up
+		 * with the counter disabled. Moreover, it may also report
+		 * a potentially incorrect fixed 13 MHz frequency. To be
+		 * correct these registers need to be updated to use the
+		 * frequency EXTAL / 2 which can be determined by the MD pins.
+		 */
+
+		switch (mode & (MD(14) | MD(13))) {
+		case 0:
+			extal_mhz = 15;
+			break;
+		case MD(13):
+			extal_mhz = 20;
+			break;
+		case MD(14):
+			extal_mhz = 26;
+			break;
+		case MD(13) | MD(14):
+			extal_mhz = 30;
+			break;
+		}
+
+		/* The arch timer frequency equals EXTAL / 2 */
+		freq = extal_mhz * (1000000 / 2);
 	}
 
-	/* The arch timer frequency equals EXTAL / 2 */
-	freq = extal_mhz * (1000000 / 2);
-
 	/* Remap "armgcnt address map" space */
 	base = ioremap(0xe6080000, PAGE_SIZE);
 

arch/arm/mach-shmobile/setup-sh7372.c

@@ -1012,6 +1012,7 @@ DT_MACHINE_START(SH7372_DT, "Generic SH7372 (Flattened Device Tree)")
 	.init_irq	= sh7372_init_irq,
 	.handle_irq	= shmobile_handle_irq_intc,
 	.init_machine	= sh7372_add_standard_devices_dt,
+	.init_late	= shmobile_init_late,
 	.dt_compat	= sh7372_boards_compat_dt,
 MACHINE_END
 

arch/arm/mach-shmobile/timer.c

@@ -45,6 +45,7 @@ void __init shmobile_init_delay(void)
 	struct device_node *np, *cpus;
 	bool is_a7_a8_a9 = false;
 	bool is_a15 = false;
+	bool has_arch_timer = false;
 	u32 max_freq = 0;
 
 	cpus = of_find_node_by_path("/cpus");
@@ -57,12 +58,16 @@ void __init shmobile_init_delay(void)
 		if (!of_property_read_u32(np, "clock-frequency", &freq))
 			max_freq = max(max_freq, freq);
 
-		if (of_device_is_compatible(np, "arm,cortex-a7") ||
-		    of_device_is_compatible(np, "arm,cortex-a8") ||
-		    of_device_is_compatible(np, "arm,cortex-a9"))
+		if (of_device_is_compatible(np, "arm,cortex-a8") ||
+		    of_device_is_compatible(np, "arm,cortex-a9")) {
 			is_a7_a8_a9 = true;
-		else if (of_device_is_compatible(np, "arm,cortex-a15"))
+		} else if (of_device_is_compatible(np, "arm,cortex-a7")) {
+			is_a7_a8_a9 = true;
+			has_arch_timer = true;
+		} else if (of_device_is_compatible(np, "arm,cortex-a15")) {
 			is_a15 = true;
+			has_arch_timer = true;
+		}
 	}
 
 	of_node_put(cpus);
@@ -70,10 +75,12 @@ void __init shmobile_init_delay(void)
 	if (!max_freq)
 		return;
 
-	if (is_a7_a8_a9)
-		shmobile_setup_delay_hz(max_freq, 1, 3);
-	else if (is_a15 && !IS_ENABLED(CONFIG_ARM_ARCH_TIMER))
-		shmobile_setup_delay_hz(max_freq, 2, 4);
+	if (!has_arch_timer || !IS_ENABLED(CONFIG_ARM_ARCH_TIMER)) {
+		if (is_a7_a8_a9)
+			shmobile_setup_delay_hz(max_freq, 1, 3);
+		else if (is_a15)
+			shmobile_setup_delay_hz(max_freq, 2, 4);
+	}
 }
 
 static void __init shmobile_late_time_init(void)