rtlwifi: rtl8192cu: Remove all instances of DBG_EMERG

This is a step toward eliminating the RT_TRACE macros. Those calls that
have DBG_EMERG as the level are always logged, and they represent error
conditions, thus they are replaced with pr_err().

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

drivers/net/wireless/realtek/rtlwifi/rtl8192cu/hw.c

@@ -452,8 +452,7 @@ static int _rtl92cu_init_power_on(struct ieee80211_hw *hw)
 			break;
 		}
 		if (pollingCount++ > 100) {
-			RT_TRACE(rtlpriv, COMP_INIT, DBG_EMERG,
-				 "Failed to polling REG_APS_FSMCO[PFM_ALDN] done!\n");
+			pr_err("Failed to polling REG_APS_FSMCO[PFM_ALDN] done!\n");
 			return -ENODEV;
 		}
 	} while (true);
@@ -486,8 +485,7 @@ static int _rtl92cu_init_power_on(struct ieee80211_hw *hw)
 			break;
 		}
 		if (pollingCount++ > 1000) {
-			RT_TRACE(rtlpriv, COMP_INIT, DBG_EMERG,
-				 "Failed to polling REG_APS_FSMCO[APFM_ONMAC] done!\n");
+			pr_err("Failed to polling REG_APS_FSMCO[APFM_ONMAC] done!\n");
 			return -ENODEV;
 		}
 	} while (true);
@@ -687,7 +685,6 @@ static void _rtl92cu_init_chipN_three_out_ep_priority(struct ieee80211_hw *hw,
 						      u8 queue_sel)
 {
 	u16 beQ, bkQ, viQ, voQ, mgtQ, hiQ;
-	struct rtl_priv *rtlpriv = rtl_priv(hw);
 
 	if (!wmm_enable) { /* typical setting */
 		beQ	= QUEUE_LOW;
@@ -705,8 +702,7 @@ static void _rtl92cu_init_chipN_three_out_ep_priority(struct ieee80211_hw *hw,
 		hiQ	= QUEUE_HIGH;
 	}
 	_rtl92c_init_chipN_reg_priority(hw, beQ, bkQ, viQ, voQ, mgtQ, hiQ);
-	RT_TRACE(rtlpriv, COMP_INIT, DBG_EMERG, "Tx queue select :0x%02x..\n",
-		 queue_sel);
+	pr_info("Tx queue select :0x%02x..\n", queue_sel);
 }
 
 static void _rtl92cu_init_chipN_queue_priority(struct ieee80211_hw *hw,
@@ -765,8 +761,7 @@ static void _rtl92cu_init_chipT_queue_priority(struct ieee80211_hw *hw,
 		break;
 	}
 	rtl_write_byte(rtlpriv, (REG_TRXDMA_CTRL+1), hq_sele);
-	RT_TRACE(rtlpriv, COMP_INIT, DBG_EMERG, "Tx queue select :0x%02x..\n",
-		 hq_sele);
+	pr_info("Tx queue select :0x%02x..\n", hq_sele);
 }
 
 static void _rtl92cu_init_queue_priority(struct ieee80211_hw *hw,
@@ -848,8 +843,7 @@ static int _rtl92cu_init_mac(struct ieee80211_hw *hw)
 	err = _rtl92cu_init_power_on(hw);
 
 	if (err) {
-		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
-			 "Failed to init power on!\n");
+		pr_err("Failed to init power on!\n");
 		return err;
 	}
 	if (!wmm_enable) {
@@ -860,8 +854,7 @@ static int _rtl92cu_init_mac(struct ieee80211_hw *hw)
 					: WMM_CHIP_A_TX_PAGE_BOUNDARY;
 	}
 	if (false == rtl92c_init_llt_table(hw, boundary)) {
-		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
-			 "Failed to init LLT Table!\n");
+		pr_err("Failed to init LLT Table!\n");
 		return -EINVAL;
 	}
 	_rtl92cu_init_queue_reserved_page(hw, wmm_enable, out_ep_nums,
@@ -986,7 +979,7 @@ int rtl92cu_hw_init(struct ieee80211_hw *hw)
 	rtlhal->hw_type = HARDWARE_TYPE_RTL8192CU;
 	err = _rtl92cu_init_mac(hw);
 	if (err) {
-		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "init mac failed!\n");
+		pr_err("init mac failed!\n");
 		goto exit;
 	}
 	err = rtl92c_download_fw(hw);
@@ -1099,8 +1092,7 @@ static void  _ResetDigitalProcedure1(struct ieee80211_hw *hw, bool bWithoutHWSM)
 				udelay(50);
 			}
 			if (retry_cnts >= 100) {
-				RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
-					 "#####=> 8051 reset failed!.........................\n");
+				pr_err("8051 reset failed!.........................\n");
 				/* if 8051 reset fail, reset MAC. */
 				rtl_write_byte(rtlpriv,
 					       REG_SYS_FUNC_EN + 1,
@@ -1340,8 +1332,7 @@ static int _rtl92cu_set_media_status(struct ieee80211_hw *hw,
 			 "Set Network type to AP!\n");
 		break;
 	default:
-		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
-			 "Network type %d not supported!\n", type);
+		pr_err("Network type %d not supported!\n", type);
 		goto error_out;
 	}
 	rtl_write_byte(rtlpriv, MSR, bt_msr);
@@ -1555,8 +1546,7 @@ void rtl92cu_get_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val)
 	case HAL_DEF_WOWLAN:
 		break;
 	default:
-		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
-			 "switch case %#x not processed\n", variable);
+		pr_err("switch case %#x not processed\n", variable);
 		break;
 	}
 }
@@ -1926,8 +1916,7 @@ void rtl92cu_set_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val)
 			break;
 		}
 	default:
-		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
-			 "switch case %#x not processed\n", variable);
+		pr_err("switch case %#x not processed\n", variable);
 		break;
 	}
 }

drivers/net/wireless/realtek/rtlwifi/rtl8192cu/led.c

@@ -57,8 +57,8 @@ void rtl92cu_sw_led_on(struct ieee80211_hw *hw, struct rtl_led *pled)
 		rtl_write_byte(rtlpriv, REG_LEDCFG2, (ledcfg & 0x0f) | BIT(5));
 		break;
 	default:
-		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
-			 "switch case %#x not processed\n", pled->ledpin);
+		pr_err("switch case %#x not processed\n",
+		       pled->ledpin);
 		break;
 	}
 	pled->ledon = true;
@@ -90,8 +90,8 @@ void rtl92cu_sw_led_off(struct ieee80211_hw *hw, struct rtl_led *pled)
 		rtl_write_byte(rtlpriv, REG_LEDCFG2, (ledcfg | BIT(3)));
 		break;
 	default:
-		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
-			 "switch case %#x not processed\n", pled->ledpin);
+		pr_err("switch case %#x not processed\n",
+		       pled->ledpin);
 		break;
 	}
 	pled->ledon = false;

drivers/net/wireless/realtek/rtlwifi/rtl8192cu/mac.c

@@ -157,9 +157,8 @@ bool rtl92c_llt_write(struct ieee80211_hw *hw, u32 address, u32 data)
 		if (_LLT_NO_ACTIVE == _LLT_OP_VALUE(value))
 			break;
 		if (count > POLLING_LLT_THRESHOLD) {
-			RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
-				 "Failed to polling write LLT done at address %d! _LLT_OP_VALUE(%x)\n",
-				 address, _LLT_OP_VALUE(value));
+			pr_err("Failed to polling write LLT done at address %d! _LLT_OP_VALUE(%x)\n",
+			       address, _LLT_OP_VALUE(value));
 			status = false;
 			break;
 		}
@@ -262,8 +261,7 @@ void rtl92c_set_key(struct ieee80211_hw *hw, u32 key_index,
 			enc_algo = CAM_AES;
 			break;
 		default:
-			RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
-				 "illegal switch case\n");
+			pr_err("illegal switch case\n");
 			enc_algo = CAM_TKIP;
 			break;
 		}
@@ -280,9 +278,7 @@ void rtl92c_set_key(struct ieee80211_hw *hw, u32 key_index,
 					entry_id = rtl_cam_get_free_entry(hw,
 								 p_macaddr);
 					if (entry_id >=  TOTAL_CAM_ENTRY) {
-						RT_TRACE(rtlpriv, COMP_SEC,
-							 DBG_EMERG,
-							 "Can not find free hw security cam entry\n");
+						pr_err("Can not find free hw security cam entry\n");
 						return;
 					}
 				} else {

drivers/net/wireless/realtek/rtlwifi/rtl8192cu/phy.c

@@ -274,8 +274,7 @@ bool rtl92cu_phy_config_rf_with_headerfile(struct ieee80211_hw *hw,
 		break;
 	case RF90_PATH_C:
 	case RF90_PATH_D:
-		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
-			 "switch case %#x not processed\n", rfpath);
+		pr_err("switch case %#x not processed\n", rfpath);
 		break;
 	default:
 		break;
@@ -314,8 +313,8 @@ void rtl92cu_phy_set_bw_mode_callback(struct ieee80211_hw *hw)
 		rtl_write_byte(rtlpriv, REG_RRSR + 2, reg_prsr_rsc);
 		break;
 	default:
-		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
-			 "unknown bandwidth: %#X\n", rtlphy->current_chan_bw);
+		pr_err("unknown bandwidth: %#X\n",
+		       rtlphy->current_chan_bw);
 		break;
 	}
 	switch (rtlphy->current_chan_bw) {
@@ -336,8 +335,8 @@ void rtl92cu_phy_set_bw_mode_callback(struct ieee80211_hw *hw)
 			       HAL_PRIME_CHNL_OFFSET_LOWER) ? 2 : 1);
 		break;
 	default:
-		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
-			 "unknown bandwidth: %#X\n", rtlphy->current_chan_bw);
+		pr_err("unknown bandwidth: %#X\n",
+		       rtlphy->current_chan_bw);
 		break;
 	}
 	rtl92cu_phy_rf6052_set_bandwidth(hw, rtlphy->current_chan_bw);
@@ -509,8 +508,8 @@ static bool _rtl92cu_phy_set_rf_power_state(struct ieee80211_hw *hw,
 		_rtl92c_phy_set_rf_sleep(hw);
 		break;
 	default:
-		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
-			 "switch case %#x not processed\n", rfpwr_state);
+		pr_err("switch case %#x not processed\n",
+		       rfpwr_state);
 		bresult = false;
 		break;
 	}

drivers/net/wireless/realtek/rtlwifi/rtl8192cu/rf.c

@@ -51,8 +51,7 @@ void rtl92cu_phy_rf6052_set_bandwidth(struct ieee80211_hw *hw, u8 bandwidth)
 			      rtlphy->rfreg_chnlval[0]);
 		break;
 	default:
-		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
-			 "unknown bandwidth: %#X\n", bandwidth);
+		pr_err("unknown bandwidth: %#X\n", bandwidth);
 		break;
 	}
 }

drivers/net/wireless/realtek/rtlwifi/rtl8192cu/sw.c

@@ -68,8 +68,7 @@ static int rtl92cu_init_sw_vars(struct ieee80211_hw *hw)
 	/* for firmware buf */
 	rtlpriv->rtlhal.pfirmware = vzalloc(0x4000);
 	if (!rtlpriv->rtlhal.pfirmware) {
-		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
-			 "Can't alloc buffer for fw\n");
+		pr_err("Can't alloc buffer for fw\n");
 		return 1;
 	}
 	if (IS_VENDOR_UMC_A_CUT(rtlpriv->rtlhal.version) &&
@@ -158,7 +157,7 @@ static struct rtl_hal_ops rtl8192cu_hal_ops = {
 
 static struct rtl_mod_params rtl92cu_mod_params = {
 	.sw_crypto = 0,
-	.debug = DBG_EMERG,
+	.debug = 0,
 };
 
 module_param_named(swenc, rtl92cu_mod_params.sw_crypto, bool, 0444);