Merge branch 'patchwork' into v4l_for_linus

* patchwork: (204 commits)
  [media] rc: sunxi-cir: Initialize the spinlock properly
  [media] rtl2832: do not filter out slave TS null packets
  [media] rtl2832: print reg number on error case
  [media] rtl28xxu: return demod reg page from driver cache
  [media] coda: enable MPEG-2 ES decoding
  [media] coda: don't start streaming without queued buffers
  [media] coda: hook up vidioc_prepare_buf
  [media] coda: relax coda_jpeg_check_buffer for trailing bytes
  [media] coda: make to_coda_video_device static
  [media] s5p-mfc: remove volatile attribute from MFC register addresses
  [media] s5p-mfc: merge together s5p_mfc_hw_call and s5p_mfc_hw_call_void
  [media] s5p-mfc: use spinlock to protect MFC context
  [media] s5p-mfc: remove unnecessary callbacks
  [media] s5p-mfc: make queue cleanup code common
  [media] s5p-mfc: use one implementation of s5p_mfc_get_new_ctx
  [media] s5p-mfc: constify s5p_mfc_codec_ops structures
  [media] au8522: Avoid memory leak for device config data
  [media] ir-lirc-codec.c: don't leak lirc->drv-rbuf
  [media] uvcvideo: small cleanup in uvc_video_clock_update()
  [media] uvcvideo: Fix reading the current exposure value of UVC
  ...

Documentation/DocBook/device-drivers.tmpl

@@ -238,78 +238,26 @@ X!Isound/sound_firmware.c
 !Iinclude/media/videobuf2-memops.h
      </sect1>
      <sect1><title>Digital TV (DVB) devices</title>
-!Idrivers/media/dvb-core/dvb_ca_en50221.h
-!Idrivers/media/dvb-core/dvb_frontend.h
+	<sect1><title>Digital TV Common functions</title>
 !Idrivers/media/dvb-core/dvb_math.h
 !Idrivers/media/dvb-core/dvb_ringbuffer.h
 !Idrivers/media/dvb-core/dvbdev.h
-	<sect1><title>Digital TV Demux API</title>
-	    <para>The kernel demux API defines a driver-internal interface for
-	    registering low-level, hardware specific driver to a hardware
-	    independent demux layer. It is only of interest for Digital TV
-	    device driver writers. The header file for this API is named
-	    <constant>demux.h</constant> and located in
-	    <constant>drivers/media/dvb-core</constant>.</para>
-
-	<para>The demux API should be implemented for each demux in the
-	system. It is used to select the TS source of a demux and to manage
-	the demux resources. When the demux client allocates a resource via
-	the demux API, it receives a pointer to the API of that
-	resource.</para>
-	<para>Each demux receives its TS input from a DVB front-end or from
-	memory, as set via this demux API. In a system with more than one
-	front-end, the API can be used to select one of the DVB front-ends
-	as a TS source for a demux, unless this is fixed in the HW platform.
-	The demux API only controls front-ends regarding to their connections
-	with demuxes; the APIs used to set the other front-end parameters,
-	such as tuning, are not defined in this document.</para>
-	<para>The functions that implement the abstract interface demux should
-	be defined static or module private and registered to the Demux
-	core for external access. It is not necessary to implement every
-	function in the struct <constant>dmx_demux</constant>. For example,
-	a demux interface might support Section filtering, but not PES
-	filtering. The API client is expected to check the value of any
-	function pointer before calling the function: the value of NULL means
-	that the &#8220;function is not available&#8221;.</para>
-	<para>Whenever the functions of the demux API modify shared data,
-	the possibilities of lost update and race condition problems should
-	be addressed, e.g. by protecting parts of code with mutexes.</para>
-	<para>Note that functions called from a bottom half context must not
-	sleep. Even a simple memory allocation without using GFP_ATOMIC can
-	result in a kernel thread being put to sleep if swapping is needed.
-	For example, the Linux kernel calls the functions of a network device
-	interface from a bottom half context. Thus, if a demux API function
-	is called from network device code, the function must not sleep.
-	</para>
-    </sect1>
-
-    <section id="demux_callback_api">
-	<title>Demux Callback API</title>
-	<para>This kernel-space API comprises the callback functions that
-	deliver filtered data to the demux client. Unlike the other DVB
-	kABIs, these functions are provided by the client and called from
-	the demux code.</para>
-	<para>The function pointers of this abstract interface are not
-	packed into a structure as in the other demux APIs, because the
-	callback functions are registered and used independent of each
-	other. As an example, it is possible for the API client to provide
-	several callback functions for receiving TS packets and no
-	callbacks for PES packets or sections.</para>
-	<para>The functions that implement the callback API need not be
-	re-entrant: when a demux driver calls one of these functions,
-	the driver is not allowed to call the function again before
-	the original call returns. If a callback is triggered by a
-	hardware interrupt, it is recommended to use the Linux
-	&#8220;bottom half&#8221; mechanism or start a tasklet instead of
-	making the callback function call directly from a hardware
-	interrupt.</para>
-	<para>This mechanism is implemented by
-	<link linkend='API-dmx-ts-cb'>dmx_ts_cb()</link> and
-	<link linkend='API-dmx-section-cb'>dmx_section_cb()</link>.</para>
-    </section>
-
+	</sect1>
+	<sect1><title>Digital TV Frontend kABI</title>
+!Pdrivers/media/dvb-core/dvb_frontend.h Digital TV Frontend
+!Idrivers/media/dvb-core/dvb_frontend.h
+	</sect1>
+	<sect1><title>Digital TV Demux kABI</title>
+!Pdrivers/media/dvb-core/demux.h Digital TV Demux
+	<sect1><title>Demux Callback API</title>
+!Pdrivers/media/dvb-core/demux.h Demux Callback
+	</sect1>
 !Idrivers/media/dvb-core/demux.h
-    </sect1>
+	</sect1>
+	<sect1><title>Digital TV Conditional Access kABI</title>
+!Idrivers/media/dvb-core/dvb_ca_en50221.h
+	</sect1>
+     </sect1>
     <sect1><title>Remote Controller devices</title>
 !Iinclude/media/rc-core.h
 !Iinclude/media/lirc_dev.h

Documentation/DocBook/media/Makefile

@@ -199,8 +199,10 @@ DVB_DOCUMENTED = \
 #
 
 install_media_images = \
-	$(Q)-mkdir $(MEDIA_OBJ_DIR)/media_api; \
-	cp $(OBJIMGFILES) $(MEDIA_SRC_DIR)/*.svg $(MEDIA_SRC_DIR)/v4l/*.svg $(MEDIA_OBJ_DIR)/media_api
+	$(Q)if [ "x$(findstring media_api.xml,$(DOCBOOKS))" != "x" ]; then \
+		mkdir -p $(MEDIA_OBJ_DIR)/media_api; \
+		cp $(OBJIMGFILES) $(MEDIA_SRC_DIR)/*.svg $(MEDIA_SRC_DIR)/v4l/*.svg $(MEDIA_OBJ_DIR)/media_api; \
+	fi
 
 $(MEDIA_OBJ_DIR)/%: $(MEDIA_SRC_DIR)/%.b64
 	$(Q)base64 -d $< >$@

Documentation/DocBook/media/dvb/dvbproperty.xml

@@ -76,7 +76,7 @@ int main(void)
 
 <para>NOTE: While it is possible to directly call the Kernel code like the
     above example, it is strongly recommended to use
-    <ulink url="http://linuxtv.org/docs/libdvbv5/index.html">libdvbv5</ulink>,
+    <ulink url="https://linuxtv.org/docs/libdvbv5/index.html">libdvbv5</ulink>,
     as it provides abstraction to work with the supported digital TV standards
     and provides methods for usual operations like program scanning and to
     read/write channel descriptor files.</para>

Documentation/DocBook/media/dvb/examples.xml

@@ -3,7 +3,7 @@
 </para>
 <para>NOTE: This section is out of date, and the code below won't even
     compile. Please refer to the
-    <ulink url="http://linuxtv.org/docs/libdvbv5/index.html">libdvbv5</ulink>
+    <ulink url="https://linuxtv.org/docs/libdvbv5/index.html">libdvbv5</ulink>
     for updated/recommended examples.
 </para>
 

Documentation/DocBook/media/dvb/intro.xml

@@ -32,7 +32,7 @@ and filtering several section and PES data streams at the same time.
 new standard Linux DVB API. As a commitment to the development of
 terminals based on open standards, Nokia and Convergence made it
 available to all Linux developers and published it on
-<ulink url="http://www.linuxtv.org/" /> in September 2000.
+<ulink url="https://linuxtv.org" /> in September 2000.
 Convergence is the maintainer of the Linux DVB API. Together with the
 LinuxTV community (i.e. you, the reader of this document), the Linux DVB
 API will be constantly reviewed and improved. With the Linux driver for

Documentation/DocBook/media/v4l/capture.c.xml

@@ -5,7 +5,7 @@
  *  This program can be used and distributed without restrictions.
  *
  *      This program is provided with the V4L2 API
- * see http://linuxtv.org/docs.php for more information
+ * see https://linuxtv.org/docs.php for more information
  */
 
 #include <stdio.h>

Documentation/DocBook/media/v4l/compat.xml

@@ -2666,7 +2666,7 @@ is useful to display images captured with V4L2 devices.</para>
         <para>V4L2 does not support digital terrestrial, cable or
 satellite broadcast. A separate project aiming at digital receivers
 exists. You can find its homepage at <ulink
-url="http://linuxtv.org">http://linuxtv.org</ulink>. The Linux DVB API
+url="https://linuxtv.org">https://linuxtv.org</ulink>. The Linux DVB API
 has no connection to the V4L2 API except that drivers for hybrid
 hardware may support both.</para>
       </section>

Documentation/DocBook/media/v4l/io.xml

@@ -699,7 +699,7 @@ linkend="v4l2-buf-type" /></entry>
 buffer. It depends on the negotiated data format and may change with
 each buffer for compressed variable size data like JPEG images.
 Drivers must set this field when <structfield>type</structfield>
-refers to an input stream, applications when it refers to an output stream.
+refers to a capture stream, applications when it refers to an output stream.
 If the application sets this to 0 for an output stream, then
 <structfield>bytesused</structfield> will be set to the size of the
 buffer (see the <structfield>length</structfield> field of this struct) by
@@ -720,14 +720,14 @@ linkend="buffer-flags" />.</entry>
 	    <entry>Indicates the field order of the image in the
 buffer, see <xref linkend="v4l2-field" />. This field is not used when
 the buffer contains VBI data. Drivers must set it when
-<structfield>type</structfield> refers to an input stream,
+<structfield>type</structfield> refers to a capture stream,
 applications when it refers to an output stream.</entry>
 	  </row>
 	  <row>
 	    <entry>struct timeval</entry>
 	    <entry><structfield>timestamp</structfield></entry>
 	    <entry></entry>
-	    <entry><para>For input streams this is time when the first data
+	    <entry><para>For capture streams this is time when the first data
 	    byte was captured, as returned by the
 	    <function>clock_gettime()</function> function for the relevant
 	    clock id; see <constant>V4L2_BUF_FLAG_TIMESTAMP_*</constant> in
@@ -866,7 +866,7 @@ must set this to 0.</entry>
 	    <entry></entry>
 	    <entry>The number of bytes occupied by data in the plane
 	      (its payload). Drivers must set this field when <structfield>type</structfield>
-	      refers to an input stream, applications when it refers to an output stream.
+	      refers to a capture stream, applications when it refers to an output stream.
 	      If the application sets this to 0 for an output stream, then
 	      <structfield>bytesused</structfield> will be set to the size of the
 	      plane (see the <structfield>length</structfield> field of this struct)
@@ -919,7 +919,7 @@ must set this to 0.</entry>
 	    <entry></entry>
 	    <entry>Offset in bytes to video data in the plane.
 	      Drivers must set this field when <structfield>type</structfield>
-	      refers to an input stream, applications when it refers to an output stream.
+	      refers to a capture stream, applications when it refers to an output stream.
 	      Note that data_offset is included in <structfield>bytesused</structfield>.
 	      So the size of the image in the plane is
 	      <structfield>bytesused</structfield>-<structfield>data_offset</structfield> at

Documentation/DocBook/media/v4l/v4l2.xml

@@ -151,6 +151,16 @@ Rubli, Andy Walls, Muralidharan Karicheri, Mauro Carvalho Chehab,
 structs, ioctls) must be noted in more detail in the history chapter
 (compat.xml), along with the possible impact on existing drivers and
 applications. -->
+      <revision>
+	<revnumber>4.5</revnumber>
+	<date>2015-10-29</date>
+	<authorinitials>rr</authorinitials>
+	<revremark>Extend vidioc-g-ext-ctrls;. Replace ctrl_class with a new
+union with ctrl_class and which. Which is used to select the current value of
+the control or the default value.
+	</revremark>
+      </revision>
+
       <revision>
 	<revnumber>4.4</revnumber>
 	<date>2015-05-26</date>

Documentation/DocBook/media/v4l/vidioc-create-bufs.xml

@@ -58,7 +58,7 @@
     <para>This ioctl is used to create buffers for <link linkend="mmap">memory
 mapped</link> or <link linkend="userp">user pointer</link> or <link
 linkend="dmabuf">DMA buffer</link> I/O. It can be used as an alternative or in
-addition to the <constant>VIDIOC_REQBUFS</constant> ioctl, when a tighter
+addition to the &VIDIOC-REQBUFS; ioctl, when a tighter
 control over buffers is required. This ioctl can be called multiple times to
 create buffers of different sizes.</para>
 
@@ -71,30 +71,28 @@ zeroed.</para>
 
     <para>The <structfield>format</structfield> field specifies the image format
 that the buffers must be able to handle. The application has to fill in this
-&v4l2-format;. Usually this will be done using the
-<constant>VIDIOC_TRY_FMT</constant> or <constant>VIDIOC_G_FMT</constant> ioctl()
-to ensure that the requested format is supported by the driver. Unsupported
-formats will result in an error.</para>
+&v4l2-format;. Usually this will be done using the &VIDIOC-TRY-FMT; or &VIDIOC-G-FMT; ioctls
+to ensure that the requested format is supported by the driver.
+Based on the format's <structfield>type</structfield> field the requested buffer
+size (for single-planar) or plane sizes (for multi-planar formats) will be
+used for the allocated buffers. The driver may return an error if the size(s)
+are not supported by the hardware (usually because they are too small).</para>
 
     <para>The buffers created by this ioctl will have as minimum size the size
-defined by the <structfield>format.pix.sizeimage</structfield> field. If the
+defined by the <structfield>format.pix.sizeimage</structfield> field (or the
+corresponding fields for other format types). Usually if the
 <structfield>format.pix.sizeimage</structfield> field is less than the minimum
-required for the given format, then <structfield>sizeimage</structfield> will be
-increased by the driver to that minimum to allocate the buffers. If it is
-larger, then the value will be used as-is. The same applies to the
-<structfield>sizeimage</structfield> field of the
-<structname>v4l2_plane_pix_format</structname> structure in the case of
-multiplanar formats.</para>
+required for the given format, then an error will be returned since drivers will
+typically not allow this. If it is larger, then the value will be used as-is.
+In other words, the driver may reject the requested size, but if it is accepted
+the driver will use it unchanged.</para>
 
     <para>When the ioctl is called with a pointer to this structure the driver
 will attempt to allocate up to the requested number of buffers and store the
 actual number allocated and the starting index in the
 <structfield>count</structfield> and the <structfield>index</structfield> fields
 respectively. On return <structfield>count</structfield> can be smaller than
-the number requested. The driver may also increase buffer sizes if required,
-however, it will not update <structfield>sizeimage</structfield> field values.
-The user has to use <constant>VIDIOC_QUERYBUF</constant> to retrieve that
-information.</para>
+the number requested.</para>
 
     <table pgwide="1" frame="none" id="v4l2-create-buffers">
       <title>struct <structname>v4l2_create_buffers</structname></title>

Documentation/DocBook/media/v4l/vidioc-dbg-g-chip-info.xml

@@ -99,7 +99,7 @@ if the driver supports writing registers to the device.</para>
     <para>We recommended the <application>v4l2-dbg</application>
 utility over calling this ioctl directly. It is available from the
 LinuxTV v4l-dvb repository; see <ulink
-url="http://linuxtv.org/repo/">http://linuxtv.org/repo/</ulink> for
+url="https://linuxtv.org/repo/">https://linuxtv.org/repo/</ulink> for
 access instructions.</para>
 
     <!-- Note for convenience vidioc-dbg-g-register.sgml

Documentation/DocBook/media/v4l/vidioc-dbg-g-register.xml

@@ -117,7 +117,7 @@ However when a driver supports these ioctls it must also support
     <para>We recommended the <application>v4l2-dbg</application>
 utility over calling these ioctls directly. It is available from the
 LinuxTV v4l-dvb repository; see <ulink
-url="http://linuxtv.org/repo/">http://linuxtv.org/repo/</ulink> for
+url="https://linuxtv.org/repo/">https://linuxtv.org/repo/</ulink> for
 access instructions.</para>
 
     <!-- Note for convenience vidioc-dbg-g-chip-info.sgml

Documentation/DocBook/media/v4l/vidioc-enumstd.xml

@@ -198,7 +198,7 @@ video4linux-list@redhat.com on 17 Oct 2002
 <constant>V4L2_STD_ATSC_16_VSB</constant> are U.S. terrestrial digital
 TV standards. Presently the V4L2 API does not support digital TV. See
 also the Linux DVB API at <ulink
-url="http://linuxtv.org">http://linuxtv.org</ulink>.</para>
+url="https://linuxtv.org">https://linuxtv.org</ulink>.</para>
 <para><programlisting>
 #define V4L2_STD_PAL_BG         (V4L2_STD_PAL_B         |\
 				 V4L2_STD_PAL_B1        |\

Documentation/DocBook/media/v4l/vidioc-g-ext-ctrls.xml

@@ -61,7 +61,7 @@ must belong to the same control class.</para>
 
     <para>Applications must always fill in the
 <structfield>count</structfield>,
-<structfield>ctrl_class</structfield>,
+<structfield>which</structfield>,
 <structfield>controls</structfield> and
 <structfield>reserved</structfield> fields of &v4l2-ext-controls;, and
 initialize the &v4l2-ext-control; array pointed to by the
@@ -109,7 +109,7 @@ the driver whether wrong values are automatically adjusted to a valid
 value or if an error is returned.</para>
 
     <para>When the <structfield>id</structfield> or
-<structfield>ctrl_class</structfield> is invalid drivers return an
+<structfield>which</structfield> is invalid drivers return an
 &EINVAL;. When the value is out of bounds drivers can choose to take
 the closest valid value or return an &ERANGE;, whatever seems more
 appropriate. In the first case the new value is set in
@@ -223,7 +223,12 @@ Valid if <constant>V4L2_CTRL_FLAG_HAS_PAYLOAD</constant> is set for this control
       <tgroup cols="3">
 	&cs-str;
 	<tbody valign="top">
+	 <row>
+	    <entry>union</entry>
+	    <entry>(anonymous)</entry>
+	  </row>
 	  <row>
+	    <entry></entry>
 	    <entry>__u32</entry>
 	    <entry><structfield>ctrl_class</structfield></entry>
 	    <entry>The control class to which all controls belong, see
@@ -233,6 +238,23 @@ belong to any control class. Whether drivers support this can be tested by setti
 <structfield>ctrl_class</structfield> to 0 and calling <constant>VIDIOC_TRY_EXT_CTRLS</constant>
 with a <structfield>count</structfield> of 0. If that succeeds, then the driver
 supports this feature.</entry>
+	  </row>
+	  <row>
+	    <entry></entry>
+	    <entry>__u32</entry>
+	    <entry><structfield>which</structfield></entry>
+	    <entry><para>Which value of the control to get/set/try. <constant>V4L2_CTRL_WHICH_CUR_VAL</constant>
+will return the current value of the control and <constant>V4L2_CTRL_WHICH_DEF_VAL</constant> will
+return the default value of the control. Please note that you can only get the default value of the
+control, you cannot set or try it.</para>
+<para>For backwards compatibility you can also use a control class here (see
+<xref linkend="ctrl-class" />). In that case all controls have to belong to that
+control class. This usage is deprecated, instead just use <constant>V4L2_CTRL_WHICH_CUR_VAL</constant>.
+There are some very old drivers that do not yet support <constant>V4L2_CTRL_WHICH_CUR_VAL</constant>
+and that require a control class here. You can test for such drivers by setting ctrl_class to
+<constant>V4L2_CTRL_WHICH_CUR_VAL</constant> and calling VIDIOC_TRY_EXT_CTRLS with a count of 0.
+If that fails, then the driver does not support <constant>V4L2_CTRL_WHICH_CUR_VAL</constant>.</para>
+</entry>
 	  </row>
 	  <row>
 	    <entry>__u32</entry>
@@ -390,7 +412,7 @@ These controls are described in <xref linkend="rf-tuner-controls" />.</entry>
 	<listitem>
 	  <para>The &v4l2-ext-control; <structfield>id</structfield>
 is invalid, the &v4l2-ext-controls;
-<structfield>ctrl_class</structfield> is invalid, or the &v4l2-ext-control;
+<structfield>which</structfield> is invalid, or the &v4l2-ext-control;
 <structfield>value</structfield> was inappropriate (e.g. the given menu
 index is not supported by the driver). This error code is
 also returned by the <constant>VIDIOC_S_EXT_CTRLS</constant> and

Documentation/DocBook/media_api.tmpl

@@ -19,10 +19,10 @@
 <!ENTITY cs-def                 "<colspec colname='c1' colwidth='3*' /><colspec colname='c2' colwidth='1*' /><colspec colname='c3' colwidth='4*' /><spanspec spanname='hspan' namest='c1' nameend='c3' />">
 
 <!-- Video for Linux mailing list address. -->
-<!ENTITY v4l-ml                 "<ulink url='http://www.linuxtv.org/lists.php'>http://www.linuxtv.org/lists.php</ulink>">
+<!ENTITY v4l-ml                 "<ulink url='https://linuxtv.org/lists.php'>https://linuxtv.org/lists.php</ulink>">
 
 <!-- LinuxTV v4l-dvb repository. -->
-<!ENTITY v4l-dvb		"<ulink url='http://linuxtv.org/repo/'>http://linuxtv.org/repo/</ulink>">
+<!ENTITY v4l-dvb		"<ulink url='https://linuxtv.org/repo/'>https://linuxtv.org/repo/</ulink>">
 <!ENTITY dash-ent-8             "<entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry>">
 <!ENTITY dash-ent-10            "<entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry>">
 <!ENTITY dash-ent-12            "<entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry>">
@@ -91,7 +91,7 @@
 	      components, like mixers, PCM capture, PCM playback, etc, which
 	      are controlled via ALSA API.</para>
 	<para>For additional information and for the latest development code,
-		see: <ulink url="http://linuxtv.org">http://linuxtv.org</ulink>.</para>
+		see: <ulink url="https://linuxtv.org">https://linuxtv.org</ulink>.</para>
 	<para>For discussing improvements, reporting troubles, sending new drivers, etc, please mail to: <ulink url="http://vger.kernel.org/vger-lists.html#linux-media">Linux Media Mailing List (LMML).</ulink>.</para>
 </preface>
 

Documentation/devicetree/bindings/media/stih407-c8sectpfe.txt

@@ -35,7 +35,7 @@ Required properties (tsin (child) node):
 
 - tsin-num	: tsin id of the InputBlock (must be between 0 to 6)
 - i2c-bus	: phandle to the I2C bus DT node which the demodulators & tuners on this tsin channel are connected.
-- rst-gpio	: reset gpio for this tsin channel.
+- reset-gpios	: reset gpio for this tsin channel.
 
 Optional properties (tsin (child) node):
 
@@ -55,27 +55,27 @@ Example:
 		status = "okay";
 		reg = <0x08a20000 0x10000>, <0x08a00000 0x4000>;
 		reg-names = "stfe", "stfe-ram";
-		interrupts = <0 34 0>, <0 35 0>;
+		interrupts = <GIC_SPI 34 IRQ_TYPE_NONE>, <GIC_SPI 35 IRQ_TYPE_NONE>;
 		interrupt-names = "stfe-error-irq", "stfe-idle-irq";
-
-		pinctrl-names	= "tsin0-serial", "tsin0-parallel", "tsin3-serial",
-				"tsin4-serial", "tsin5-serial";
-
 		pinctrl-0	= <&pinctrl_tsin0_serial>;
 		pinctrl-1	= <&pinctrl_tsin0_parallel>;
 		pinctrl-2	= <&pinctrl_tsin3_serial>;
 		pinctrl-3	= <&pinctrl_tsin4_serial_alt3>;
 		pinctrl-4	= <&pinctrl_tsin5_serial_alt1>;
-
+		pinctrl-names	= "tsin0-serial",
+				  "tsin0-parallel",
+				  "tsin3-serial",
+				  "tsin4-serial",
+				  "tsin5-serial";
 		clocks = <&clk_s_c0_flexgen CLK_PROC_STFE>;
-		clock-names = "stfe";
+		clock-names = "c8sectpfe";
 
 		/* tsin0 is TSA on NIMA */
 		tsin0: port@0 {
 			tsin-num		= <0>;
 			serial-not-parallel;
 			i2c-bus			= <&ssc2>;
-			rst-gpio		= <&pio15 4 0>;
+			reset-gpios		= <&pio15 4 GPIO_ACTIVE_HIGH>;
 			dvb-card		= <STV0367_TDA18212_NIMA_1>;
 		};
 
@@ -83,7 +83,7 @@ Example:
 			tsin-num		= <3>;
 			serial-not-parallel;
 			i2c-bus			= <&ssc3>;
-			rst-gpio		= <&pio15 7 0>;
+			reset-gpios		= <&pio15 7 GPIO_ACTIVE_HIGH>;
 			dvb-card		= <STV0367_TDA18212_NIMB_1>;
 		};
 	};

Documentation/dvb/README.dvb-usb

@@ -45,7 +45,7 @@ Supported devices
 See the LinuxTV DVB Wiki at www.linuxtv.org for a complete list of
 cards/drivers/firmwares:
 
-http://www.linuxtv.org/wiki/index.php/DVB_USB
+https://linuxtv.org/wiki/index.php/DVB_USB
 
 0. History & News:
   2005-06-30 - added support for WideView WT-220U (Thanks to Steve Chang)
@@ -121,7 +121,7 @@ working.
 Have a look at the Wikipage for the DVB-USB-drivers to find out, which firmware
 you need for your device:
 
-http://www.linuxtv.org/wiki/index.php/DVB_USB
+https://linuxtv.org/wiki/index.php/DVB_USB
 
 1.2. Compiling
 

Documentation/dvb/faq.txt

@@ -76,7 +76,7 @@ Some very frequently asked questions about linuxtv-dvb
 		the TuxBox CVS many interesting DVB applications and the dBox2
 		DVB source
 
-	http://www.linuxtv.org/downloads/	
+	https://linuxtv.org/downloads
 		DVB Swiss Army Knife library and utilities
 
 	http://www.nenie.org/misc/mpsys/

Documentation/dvb/get_dvb_firmware

@@ -152,7 +152,7 @@ sub tda10046lifeview {
 
 sub av7110 {
     my $sourcefile = "dvb-ttpci-01.fw-261d";
-    my $url = "http://www.linuxtv.org/downloads/firmware/$sourcefile";
+    my $url = "https://linuxtv.org/downloads/firmware/$sourcefile";
     my $hash = "603431b6259715a8e88f376a53b64e2f";
     my $outfile = "dvb-ttpci-01.fw";
 
@@ -303,7 +303,7 @@ sub vp7049 {
 }
 
 sub dibusb {
-	my $url = "http://www.linuxtv.org/downloads/firmware/dvb-usb-dibusb-5.0.0.11.fw";
+	my $url = "https://linuxtv.org/downloads/firmware/dvb-usb-dibusb-5.0.0.11.fw";
 	my $outfile = "dvb-dibusb-5.0.0.11.fw";
 	my $hash = "fa490295a527360ca16dcdf3224ca243";
 
@@ -351,7 +351,7 @@ sub nxt2004 {
 
 sub or51211 {
     my $fwfile = "dvb-fe-or51211.fw";
-    my $url = "http://linuxtv.org/downloads/firmware/$fwfile";
+    my $url = "https://linuxtv.org/downloads/firmware/$fwfile";
     my $hash = "d830949c771a289505bf9eafc225d491";
 
     checkstandard();
@@ -364,7 +364,7 @@ sub or51211 {
 
 sub cx231xx {
     my $fwfile = "v4l-cx231xx-avcore-01.fw";
-    my $url = "http://linuxtv.org/downloads/firmware/$fwfile";
+    my $url = "https://linuxtv.org/downloads/firmware/$fwfile";
     my $hash = "7d3bb956dc9df0eafded2b56ba57cc42";
 
     checkstandard();
@@ -376,7 +376,7 @@ sub cx231xx {
 }
 
 sub cx18 {
-    my $url = "http://linuxtv.org/downloads/firmware/";
+    my $url = "https://linuxtv.org/downloads/firmware/";
 
     my %files = (
 	'v4l-cx23418-apu.fw' => '588f081b562f5c653a3db1ad8f65939a',
@@ -450,7 +450,7 @@ sub mpc718 {
 }
 
 sub cx23885 {
-    my $url = "http://linuxtv.org/downloads/firmware/";
+    my $url = "https://linuxtv.org/downloads/firmware/";
 
     my %files = (
 	'v4l-cx23885-avcore-01.fw' => 'a9f8f5d901a7fb42f552e1ee6384f3bb',
@@ -472,7 +472,7 @@ sub cx23885 {
 }
 
 sub pvrusb2 {
-    my $url = "http://linuxtv.org/downloads/firmware/";
+    my $url = "https://linuxtv.org/downloads/firmware/";
 
     my %files = (
 	'v4l-cx25840.fw'           => 'dadb79e9904fc8af96e8111d9cb59320',
@@ -494,7 +494,7 @@ sub pvrusb2 {
 
 sub or51132_qam {
     my $fwfile = "dvb-fe-or51132-qam.fw";
-    my $url = "http://linuxtv.org/downloads/firmware/$fwfile";
+    my $url = "https://linuxtv.org/downloads/firmware/$fwfile";
     my $hash = "7702e8938612de46ccadfe9b413cb3b5";
 
     checkstandard();
@@ -507,7 +507,7 @@ sub or51132_qam {
 
 sub or51132_vsb {
     my $fwfile = "dvb-fe-or51132-vsb.fw";
-    my $url = "http://linuxtv.org/downloads/firmware/$fwfile";
+    my $url = "https://linuxtv.org/downloads/firmware/$fwfile";
     my $hash = "c16208e02f36fc439a557ad4c613364a";
 
     checkstandard();
@@ -519,7 +519,7 @@ sub or51132_vsb {
 }
 
 sub bluebird {
-	my $url = "http://www.linuxtv.org/download/dvb/firmware/dvb-usb-bluebird-01.fw";
+	my $url = "https://linuxtv.org/download/dvb/firmware/dvb-usb-bluebird-01.fw";
 	my $outfile = "dvb-usb-bluebird-01.fw";
 	my $hash = "658397cb9eba9101af9031302671f49d";
 
@@ -677,7 +677,7 @@ sub drxk_hauppauge_hvr930c {
 }
 
 sub drxk_terratec_h5 {
-    my $url = "http://www.linuxtv.org/downloads/firmware/";
+    my $url = "https://linuxtv.org/downloads/firmware/";
     my $hash = "19000dada8e2741162ccc50cc91fa7f1";
     my $fwfile = "dvb-usb-terratec-h5-drxk.fw";
 

Documentation/dvb/readme.txt

@@ -2,12 +2,12 @@ Linux Digital Video Broadcast (DVB) subsystem
 =============================================
 
 The main development site and CVS repository for these
-drivers is http://linuxtv.org/.
+drivers is https://linuxtv.org.
 
 The developer mailing list linux-dvb is also hosted there,
-see http://linuxtv.org/lists.php. Please check
-the archive http://linuxtv.org/pipermail/linux-dvb/
-and the Wiki http://linuxtv.org/wiki/
+see https://linuxtv.org/lists.php. Please check
+the archive https://linuxtv.org/pipermail/linux-dvb/
+and the Wiki https://linuxtv.org/wiki/
 before asking newbie questions on the list.
 
 API documentation, utilities and test/example programs
@@ -16,7 +16,7 @@ are available as part of the old driver package for Linux 2.4
 We plan to split this into separate packages, but it's not
 been done yet.
 
-http://linuxtv.org/downloads/
+https://linuxtv.org/downloads/
 
 What's inside this directory:
 

Documentation/video4linux/API.html

@@ -9,7 +9,7 @@
   <table border="0">
    <tr>
     <td>
-     <a href="http://linuxtv.org/downloads/legacy/video4linux/API/V4L1_API.html">V4L original API</a>
+     <a href="https://linuxtv.org/downloads/legacy/video4linux/API/V4L1_API.html">V4L original API</a>
     </td>
     <td>
      Obsoleted by V4L2 API

Documentation/video4linux/CARDLIST.em28xx

@@ -41,8 +41,8 @@
  40 -> Plextor ConvertX PX-TV100U               (em2861)        [093b:a005]
  41 -> Kworld 350 U DVB-T                       (em2870)        [eb1a:e350]
  42 -> Kworld 355 U DVB-T                       (em2870)        [eb1a:e355,eb1a:e357,eb1a:e359]
- 43 -> Terratec Cinergy T XS                    (em2870)        [0ccd:0043]
- 44 -> Terratec Cinergy T XS (MT2060)           (em2870)
+ 43 -> Terratec Cinergy T XS                    (em2870)
+ 44 -> Terratec Cinergy T XS (MT2060)           (em2870)        [0ccd:0043]
  45 -> Pinnacle PCTV DVB-T                      (em2870)
  46 -> Compro, VideoMate U3                     (em2870)        [185b:2870]
  47 -> KWorld DVB-T 305U                        (em2880)        [eb1a:e305]

Documentation/video4linux/fimc.txt

@@ -58,7 +58,7 @@ Not currently supported:
 4.1. Media device interface
 
 The driver supports Media Controller API as defined at
-http://linuxtv.org/downloads/v4l-dvb-apis/media_common.html
+https://linuxtv.org/downloads/v4l-dvb-apis/media_common.html
 The media device driver name is "SAMSUNG S5P FIMC".
 
 The purpose of this interface is to allow changing assignment of FIMC instances
@@ -83,11 +83,11 @@ undefined behaviour.
 4.3. Capture video node
 
 The driver supports V4L2 Video Capture Interface as defined at:
-http://linuxtv.org/downloads/v4l-dvb-apis/devices.html
+https://linuxtv.org/downloads/v4l-dvb-apis/devices.html
 
 At the capture and mem-to-mem video nodes only the multi-planar API is
 supported. For more details see:
-http://linuxtv.org/downloads/v4l-dvb-apis/planar-apis.html
+https://linuxtv.org/downloads/v4l-dvb-apis/planar-apis.html
 
 4.4. Camera capture subdevs
 

Documentation/video4linux/omap4_camera.txt

@@ -47,7 +47,7 @@ Tested platforms
 File list
 ---------
 drivers/staging/media/omap4iss/
-include/media/omap4iss.h
+include/linux/platform_data/media/omap4iss.h
 
 References
 ----------

Documentation/video4linux/si4713.txt

@@ -157,7 +157,7 @@ int main (int argc, char *argv[])
 }
 
 The struct si4713_rnl and SI4713_IOC_MEASURE_RNL are defined under
-include/media/si4713.h.
+include/linux/platform_data/media/si4713.h.
 
 Stereo/Mono and RDS subchannels
 ===============================

Documentation/video4linux/v4l2-pci-skeleton.c

@@ -163,11 +163,10 @@ static irqreturn_t skeleton_irq(int irq, void *dev_id)
  * minimum number: many DMA engines need a minimum of 2 buffers in the
  * queue and you need to have another available for userspace processing.
  */
-static int queue_setup(struct vb2_queue *vq, const void *parg,
+static int queue_setup(struct vb2_queue *vq,
 		       unsigned int *nbuffers, unsigned int *nplanes,
 		       unsigned int sizes[], void *alloc_ctxs[])
 {
-	const struct v4l2_format *fmt = parg;
 	struct skeleton *skel = vb2_get_drv_priv(vq);
 
 	skel->field = skel->format.field;
@@ -183,12 +182,12 @@ static int queue_setup(struct vb2_queue *vq, const void *parg,
 
 	if (vq->num_buffers + *nbuffers < 3)
 		*nbuffers = 3 - vq->num_buffers;
+	alloc_ctxs[0] = skel->alloc_ctx;
 
-	if (fmt && fmt->fmt.pix.sizeimage < skel->format.sizeimage)
-		return -EINVAL;
+	if (*nplanes)
+		return sizes[0] < skel->format.sizeimage ? -EINVAL : 0;
 	*nplanes = 1;
-	sizes[0] = fmt ? fmt->fmt.pix.sizeimage : skel->format.sizeimage;
-	alloc_ctxs[0] = skel->alloc_ctx;
+	sizes[0] = skel->format.sizeimage;
 	return 0;
 }
 
@@ -509,7 +508,7 @@ static int skeleton_s_dv_timings(struct file *file, void *_fh,
 		return -EINVAL;
 
 	/* Return 0 if the new timings are the same as the current timings. */
-	if (v4l2_match_dv_timings(timings, &skel->timings, 0))
+	if (v4l2_match_dv_timings(timings, &skel->timings, 0, false))
 		return 0;
 
 	/*

MAINTAINERS

@@ -206,7 +206,7 @@ F:	include/trace/events/9p.h
 A8293 MEDIA DRIVER
 M:	Antti Palosaari <crope@iki.fi>
 L:	linux-media@vger.kernel.org
-W:	http://linuxtv.org/
+W:	https://linuxtv.org
 W:	http://palosaari.fi/linux/
 Q:	http://patchwork.linuxtv.org/project/linux-media/list/
 T:	git git://linuxtv.org/anttip/media_tree.git
@@ -395,7 +395,7 @@ M:	Sakari Ailus <sakari.ailus@iki.fi>
 L:	linux-media@vger.kernel.org
 S:	Maintained
 F:	drivers/media/i2c/adp1653.c
-F:	include/media/adp1653.h
+F:	include/media/i2c/adp1653.h
 
 ADP5520 BACKLIGHT DRIVER WITH IO EXPANDER (ADP5520/ADP5501)
 M:	Michael Hennerich <michael.hennerich@analog.com>
@@ -466,7 +466,7 @@ F:	sound/oss/aedsp16.c
 AF9013 MEDIA DRIVER
 M:	Antti Palosaari <crope@iki.fi>
 L:	linux-media@vger.kernel.org
-W:	http://linuxtv.org/
+W:	https://linuxtv.org
 W:	http://palosaari.fi/linux/
 Q:	http://patchwork.linuxtv.org/project/linux-media/list/
 T:	git git://linuxtv.org/anttip/media_tree.git
@@ -476,7 +476,7 @@ F:	drivers/media/dvb-frontends/af9013*
 AF9033 MEDIA DRIVER
 M:	Antti Palosaari <crope@iki.fi>
 L:	linux-media@vger.kernel.org
-W:	http://linuxtv.org/
+W:	https://linuxtv.org
 W:	http://palosaari.fi/linux/
 Q:	http://patchwork.linuxtv.org/project/linux-media/list/
 T:	git git://linuxtv.org/anttip/media_tree.git
@@ -522,7 +522,7 @@ AIMSLAB FM RADIO RECEIVER DRIVER
 M:	Hans Verkuil <hverkuil@xs4all.nl>
 L:	linux-media@vger.kernel.org
 T:	git git://linuxtv.org/media_tree.git
-W:	http://linuxtv.org
+W:	https://linuxtv.org
 S:	Maintained
 F:	drivers/media/radio/radio-aimslab*
 
@@ -536,7 +536,7 @@ F:	include/linux/*aio*.h
 AIRSPY MEDIA DRIVER
 M:	Antti Palosaari <crope@iki.fi>
 L:	linux-media@vger.kernel.org
-W:	http://linuxtv.org/
+W:	https://linuxtv.org
 W:	http://palosaari.fi/linux/
 Q:	http://patchwork.linuxtv.org/project/linux-media/list/
 T:	git git://linuxtv.org/anttip/media_tree.git
@@ -1773,7 +1773,7 @@ L:	linux-media@vger.kernel.org
 T:	git git://linuxtv.org/media_tree.git
 S:	Maintained
 F:	drivers/media/i2c/as3645a.c
-F:	include/media/as3645a.h
+F:	include/media/i2c/as3645a.h
 
 ASC7621 HARDWARE MONITOR DRIVER
 M:	George Joseph <george.joseph@fairview5.com>
@@ -2064,7 +2064,7 @@ F:	net/ax25/
 AZ6007 DVB DRIVER
 M:	Mauro Carvalho Chehab <mchehab@osg.samsung.com>
 L:	linux-media@vger.kernel.org
-W:	http://linuxtv.org
+W:	https://linuxtv.org
 T:	git git://linuxtv.org/media_tree.git
 S:	Maintained
 F:	drivers/media/usb/dvb-usb-v2/az6007.c
@@ -2073,7 +2073,7 @@ AZTECH FM RADIO RECEIVER DRIVER
 M:	Hans Verkuil <hverkuil@xs4all.nl>
 L:	linux-media@vger.kernel.org
 T:	git git://linuxtv.org/media_tree.git
-W:	http://linuxtv.org
+W:	https://linuxtv.org
 S:	Maintained
 F:	drivers/media/radio/radio-aztech*
 
@@ -2126,7 +2126,7 @@ BDISP ST MEDIA DRIVER
 M:	Fabien Dessenne <fabien.dessenne@st.com>
 L:	linux-media@vger.kernel.org
 T:	git git://linuxtv.org/media_tree.git
-W:	http://linuxtv.org
+W:	https://linuxtv.org
 S:	Supported
 F:	drivers/media/platform/sti/bdisp
 
@@ -2519,7 +2519,7 @@ F:	fs/btrfs/
 BTTV VIDEO4LINUX DRIVER
 M:	Mauro Carvalho Chehab <mchehab@osg.samsung.com>
 L:	linux-media@vger.kernel.org
-W:	http://linuxtv.org
+W:	https://linuxtv.org
 T:	git git://linuxtv.org/media_tree.git
 S:	Odd fixes
 F:	Documentation/video4linux/bttv/
@@ -2558,7 +2558,7 @@ CADET FM/AM RADIO RECEIVER DRIVER
 M:	Hans Verkuil <hverkuil@xs4all.nl>
 L:	linux-media@vger.kernel.org
 T:	git git://linuxtv.org/media_tree.git
-W:	http://linuxtv.org
+W:	https://linuxtv.org
 S:	Maintained
 F:	drivers/media/radio/radio-cadet*
 
@@ -2851,7 +2851,7 @@ COBALT MEDIA DRIVER
 M:	Hans Verkuil <hans.verkuil@cisco.com>
 L:	linux-media@vger.kernel.org
 T:	git git://linuxtv.org/media_tree.git
-W:	http://linuxtv.org
+W:	https://linuxtv.org
 S:	Supported
 F:	drivers/media/pci/cobalt/
 
@@ -3096,6 +3096,15 @@ S:	Maintained
 F:	crypto/ansi_cprng.c
 F:	crypto/rng.c
 
+CS3308 MEDIA DRIVER
+M:	Hans Verkuil <hverkuil@xs4all.nl>
+L:	linux-media@vger.kernel.org
+T:	git git://linuxtv.org/media_tree.git
+W:	http://linuxtv.org
+S:	Odd Fixes
+F:	drivers/media/i2c/cs3308.c
+F:	drivers/media/i2c/cs3308.h
+
 CS5535 Audio ALSA driver
 M:	Jaya Kumar <jayakumar.alsa@gmail.com>
 S:	Maintained
@@ -3111,7 +3120,7 @@ M:	Andy Walls <awalls@md.metrocast.net>
 L:	ivtv-devel@ivtvdriver.org (subscribers-only)
 L:	linux-media@vger.kernel.org
 T:	git git://linuxtv.org/media_tree.git
-W:	http://linuxtv.org
+W:	https://linuxtv.org
 W:	http://www.ivtvdriver.org/index.php/Cx18
 S:	Maintained
 F:	Documentation/video4linux/cx18.txt
@@ -3122,7 +3131,7 @@ CX2341X MPEG ENCODER HELPER MODULE
 M:	Hans Verkuil <hverkuil@xs4all.nl>
 L:	linux-media@vger.kernel.org
 T:	git git://linuxtv.org/media_tree.git
-W:	http://linuxtv.org
+W:	https://linuxtv.org
 S:	Maintained
 F:	drivers/media/common/cx2341x*
 F:	include/media/cx2341x*
@@ -3131,7 +3140,7 @@ CX24120 MEDIA DRIVER
 M:	Jemma Denson <jdenson@gmail.com>
 M:	Patrick Boettcher <patrick.boettcher@posteo.de>
 L:	linux-media@vger.kernel.org
-W:	http://linuxtv.org/
+W:	https://linuxtv.org
 Q:	http://patchwork.linuxtv.org/project/linux-media/list/
 S:	Maintained
 F:	drivers/media/dvb-frontends/cx24120*
@@ -3139,7 +3148,7 @@ F:	drivers/media/dvb-frontends/cx24120*
 CX88 VIDEO4LINUX DRIVER
 M:	Mauro Carvalho Chehab <mchehab@osg.samsung.com>
 L:	linux-media@vger.kernel.org
-W:	http://linuxtv.org
+W:	https://linuxtv.org
 T:	git git://linuxtv.org/media_tree.git
 S:	Odd fixes
 F:	Documentation/video4linux/cx88/
@@ -3148,7 +3157,7 @@ F:	drivers/media/pci/cx88/
 CXD2820R MEDIA DRIVER
 M:	Antti Palosaari <crope@iki.fi>
 L:	linux-media@vger.kernel.org
-W:	http://linuxtv.org/
+W:	https://linuxtv.org
 W:	http://palosaari.fi/linux/
 Q:	http://patchwork.linuxtv.org/project/linux-media/list/
 T:	git git://linuxtv.org/anttip/media_tree.git
@@ -3254,7 +3263,7 @@ F:	drivers/net/wan/pc300*
 CYPRESS_FIRMWARE MEDIA DRIVER
 M:	Antti Palosaari <crope@iki.fi>
 L:	linux-media@vger.kernel.org
-W:	http://linuxtv.org/
+W:	https://linuxtv.org
 W:	http://palosaari.fi/linux/
 Q:	http://patchwork.linuxtv.org/project/linux-media/list/
 T:	git git://linuxtv.org/anttip/media_tree.git
@@ -3761,14 +3770,14 @@ DT3155 MEDIA DRIVER
 M:	Hans Verkuil <hverkuil@xs4all.nl>
 L:	linux-media@vger.kernel.org
 T:	git git://linuxtv.org/media_tree.git
-W:	http://linuxtv.org
+W:	https://linuxtv.org
 S:	Odd Fixes
 F:	drivers/media/pci/dt3155/
 
 DVB_USB_AF9015 MEDIA DRIVER
 M:	Antti Palosaari <crope@iki.fi>
 L:	linux-media@vger.kernel.org
-W:	http://linuxtv.org/
+W:	https://linuxtv.org
 W:	http://palosaari.fi/linux/
 Q:	http://patchwork.linuxtv.org/project/linux-media/list/
 T:	git git://linuxtv.org/anttip/media_tree.git
@@ -3778,7 +3787,7 @@ F:	drivers/media/usb/dvb-usb-v2/af9015*
 DVB_USB_AF9035 MEDIA DRIVER
 M:	Antti Palosaari <crope@iki.fi>
 L:	linux-media@vger.kernel.org
-W:	http://linuxtv.org/
+W:	https://linuxtv.org
 W:	http://palosaari.fi/linux/
 Q:	http://patchwork.linuxtv.org/project/linux-media/list/
 T:	git git://linuxtv.org/anttip/media_tree.git
@@ -3788,7 +3797,7 @@ F:	drivers/media/usb/dvb-usb-v2/af9035*
 DVB_USB_ANYSEE MEDIA DRIVER
 M:	Antti Palosaari <crope@iki.fi>
 L:	linux-media@vger.kernel.org
-W:	http://linuxtv.org/
+W:	https://linuxtv.org
 W:	http://palosaari.fi/linux/
 Q:	http://patchwork.linuxtv.org/project/linux-media/list/
 T:	git git://linuxtv.org/anttip/media_tree.git
@@ -3798,7 +3807,7 @@ F:	drivers/media/usb/dvb-usb-v2/anysee*
 DVB_USB_AU6610 MEDIA DRIVER
 M:	Antti Palosaari <crope@iki.fi>
 L:	linux-media@vger.kernel.org
-W:	http://linuxtv.org/
+W:	https://linuxtv.org
 W:	http://palosaari.fi/linux/
 Q:	http://patchwork.linuxtv.org/project/linux-media/list/
 T:	git git://linuxtv.org/anttip/media_tree.git
@@ -3808,7 +3817,7 @@ F:	drivers/media/usb/dvb-usb-v2/au6610*
 DVB_USB_CE6230 MEDIA DRIVER
 M:	Antti Palosaari <crope@iki.fi>
 L:	linux-media@vger.kernel.org
-W:	http://linuxtv.org/
+W:	https://linuxtv.org
 W:	http://palosaari.fi/linux/
 Q:	http://patchwork.linuxtv.org/project/linux-media/list/
 T:	git git://linuxtv.org/anttip/media_tree.git
@@ -3818,7 +3827,7 @@ F:	drivers/media/usb/dvb-usb-v2/ce6230*
 DVB_USB_CXUSB MEDIA DRIVER
 M:	Michael Krufky <mkrufky@linuxtv.org>
 L:	linux-media@vger.kernel.org
-W:	http://linuxtv.org/
+W:	https://linuxtv.org
 W:	http://github.com/mkrufky
 Q:	http://patchwork.linuxtv.org/project/linux-media/list/
 T:	git git://linuxtv.org/media_tree.git
@@ -3828,7 +3837,7 @@ F:	drivers/media/usb/dvb-usb/cxusb*
 DVB_USB_EC168 MEDIA DRIVER
 M:	Antti Palosaari <crope@iki.fi>
 L:	linux-media@vger.kernel.org
-W:	http://linuxtv.org/
+W:	https://linuxtv.org
 W:	http://palosaari.fi/linux/
 Q:	http://patchwork.linuxtv.org/project/linux-media/list/
 T:	git git://linuxtv.org/anttip/media_tree.git
@@ -3838,7 +3847,7 @@ F:	drivers/media/usb/dvb-usb-v2/ec168*
 DVB_USB_GL861 MEDIA DRIVER
 M:	Antti Palosaari <crope@iki.fi>
 L:	linux-media@vger.kernel.org
-W:	http://linuxtv.org/
+W:	https://linuxtv.org
 Q:	http://patchwork.linuxtv.org/project/linux-media/list/
 T:	git git://linuxtv.org/anttip/media_tree.git
 S:	Maintained
@@ -3847,7 +3856,7 @@ F:	drivers/media/usb/dvb-usb-v2/gl861*
 DVB_USB_MXL111SF MEDIA DRIVER
 M:	Michael Krufky <mkrufky@linuxtv.org>
 L:	linux-media@vger.kernel.org
-W:	http://linuxtv.org/
+W:	https://linuxtv.org
 W:	http://github.com/mkrufky
 Q:	http://patchwork.linuxtv.org/project/linux-media/list/
 T:	git git://linuxtv.org/mkrufky/mxl111sf.git
@@ -3857,7 +3866,7 @@ F:	drivers/media/usb/dvb-usb-v2/mxl111sf*
 DVB_USB_RTL28XXU MEDIA DRIVER
 M:	Antti Palosaari <crope@iki.fi>
 L:	linux-media@vger.kernel.org
-W:	http://linuxtv.org/
+W:	https://linuxtv.org
 W:	http://palosaari.fi/linux/
 Q:	http://patchwork.linuxtv.org/project/linux-media/list/
 T:	git git://linuxtv.org/anttip/media_tree.git
@@ -3867,7 +3876,7 @@ F:	drivers/media/usb/dvb-usb-v2/rtl28xxu*
 DVB_USB_V2 MEDIA DRIVER
 M:	Antti Palosaari <crope@iki.fi>
 L:	linux-media@vger.kernel.org
-W:	http://linuxtv.org/
+W:	https://linuxtv.org
 W:	http://palosaari.fi/linux/
 Q:	http://patchwork.linuxtv.org/project/linux-media/list/
 T:	git git://linuxtv.org/anttip/media_tree.git
@@ -3897,7 +3906,7 @@ F:	Documentation/devicetree/bindings/input/e3x0-button.txt
 E4000 MEDIA DRIVER
 M:	Antti Palosaari <crope@iki.fi>
 L:	linux-media@vger.kernel.org
-W:	http://linuxtv.org/
+W:	https://linuxtv.org
 W:	http://palosaari.fi/linux/
 Q:	http://patchwork.linuxtv.org/project/linux-media/list/
 T:	git git://linuxtv.org/anttip/media_tree.git
@@ -3913,7 +3922,7 @@ F:	drivers/scsi/eata.c
 EC100 MEDIA DRIVER
 M:	Antti Palosaari <crope@iki.fi>
 L:	linux-media@vger.kernel.org
-W:	http://linuxtv.org/
+W:	https://linuxtv.org
 W:	http://palosaari.fi/linux/
 Q:	http://patchwork.linuxtv.org/project/linux-media/list/
 T:	git git://linuxtv.org/anttip/media_tree.git
@@ -4137,7 +4146,7 @@ F:	drivers/net/ethernet/ibm/ehea/
 EM28XX VIDEO4LINUX DRIVER
 M:	Mauro Carvalho Chehab <mchehab@osg.samsung.com>
 L:	linux-media@vger.kernel.org
-W:	http://linuxtv.org
+W:	https://linuxtv.org
 T:	git git://linuxtv.org/media_tree.git
 S:	Maintained
 F:	drivers/media/usb/em28xx/
@@ -4277,7 +4286,7 @@ F:	drivers/media/tuners/fc0011.c
 FC2580 MEDIA DRIVER
 M:	Antti Palosaari <crope@iki.fi>
 L:	linux-media@vger.kernel.org
-W:	http://linuxtv.org/
+W:	https://linuxtv.org
 W:	http://palosaari.fi/linux/
 Q:	http://patchwork.linuxtv.org/project/linux-media/list/
 T:	git git://linuxtv.org/anttip/media_tree.git
@@ -4600,7 +4609,7 @@ M:	Heungjun Kim <riverful.kim@samsung.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
 F:	drivers/media/i2c/m5mols/
-F:	include/media/m5mols.h
+F:	include/media/i2c/m5mols.h
 
 FUJITSU TABLET EXTRAS
 M:	Robert Gerlach <khnz@gmx.de>
@@ -4646,7 +4655,7 @@ GEMTEK FM RADIO RECEIVER DRIVER
 M:	Hans Verkuil <hverkuil@xs4all.nl>
 L:	linux-media@vger.kernel.org
 T:	git git://linuxtv.org/media_tree.git
-W:	http://linuxtv.org
+W:	https://linuxtv.org
 S:	Maintained
 F:	drivers/media/radio/radio-gemtek*
 
@@ -4854,7 +4863,7 @@ HDPVR USB VIDEO ENCODER DRIVER
 M:	Hans Verkuil <hverkuil@xs4all.nl>
 L:	linux-media@vger.kernel.org
 T:	git git://linuxtv.org/media_tree.git
-W:	http://linuxtv.org
+W:	https://linuxtv.org
 S:	Odd Fixes
 F:	drivers/media/usb/hdpvr/
 
@@ -4873,7 +4882,7 @@ F:	drivers/tty/hvc/
 HACKRF MEDIA DRIVER
 M:	Antti Palosaari <crope@iki.fi>
 L:	linux-media@vger.kernel.org
-W:	http://linuxtv.org/
+W:	https://linuxtv.org
 W:	http://palosaari.fi/linux/
 Q:	http://patchwork.linuxtv.org/project/linux-media/list/
 T:	git git://linuxtv.org/anttip/media_tree.git
@@ -4916,7 +4925,7 @@ F:	sound/parisc/harmony.*
 HD29L2 MEDIA DRIVER
 M:	Antti Palosaari <crope@iki.fi>
 L:	linux-media@vger.kernel.org
-W:	http://linuxtv.org/
+W:	https://linuxtv.org
 W:	http://palosaari.fi/linux/
 Q:	http://patchwork.linuxtv.org/project/linux-media/list/
 T:	git git://linuxtv.org/anttip/media_tree.git
@@ -5822,7 +5831,7 @@ ISA RADIO MODULE
 M:	Hans Verkuil <hverkuil@xs4all.nl>
 L:	linux-media@vger.kernel.org
 T:	git git://linuxtv.org/media_tree.git
-W:	http://linuxtv.org
+W:	https://linuxtv.org
 S:	Maintained
 F:	drivers/media/radio/radio-isa*
 
@@ -5892,7 +5901,7 @@ F:	drivers/hwmon/it87.c
 IT913X MEDIA DRIVER
 M:	Antti Palosaari <crope@iki.fi>
 L:	linux-media@vger.kernel.org
-W:	http://linuxtv.org/
+W:	https://linuxtv.org
 W:	http://palosaari.fi/linux/
 Q:	http://patchwork.linuxtv.org/project/linux-media/list/
 T:	git git://linuxtv.org/anttip/media_tree.git
@@ -5913,7 +5922,7 @@ F:	include/uapi/linux/ivtv*
 IX2505V MEDIA DRIVER
 M:	Malcolm Priestley <tvboxspy@gmail.com>
 L:	linux-media@vger.kernel.org
-W:	http://linuxtv.org/
+W:	https://linuxtv.org
 Q:	http://patchwork.linuxtv.org/project/linux-media/list/
 S:	Maintained
 F:	drivers/media/dvb-frontends/ix2505v*
@@ -6002,7 +6011,7 @@ KEENE FM RADIO TRANSMITTER DRIVER
 M:	Hans Verkuil <hverkuil@xs4all.nl>
 L:	linux-media@vger.kernel.org
 T:	git git://linuxtv.org/media_tree.git
-W:	http://linuxtv.org
+W:	https://linuxtv.org
 S:	Maintained
 F:	drivers/media/radio/radio-keene*
 
@@ -6254,7 +6263,7 @@ F:	drivers/usb/misc/legousbtower.c
 LG2160 MEDIA DRIVER
 M:	Michael Krufky <mkrufky@linuxtv.org>
 L:	linux-media@vger.kernel.org
-W:	http://linuxtv.org/
+W:	https://linuxtv.org
 W:	http://github.com/mkrufky
 Q:	http://patchwork.linuxtv.org/project/linux-media/list/
 T:	git git://linuxtv.org/mkrufky/tuners.git
@@ -6264,7 +6273,7 @@ F:	drivers/media/dvb-frontends/lg2160.*
 LGDT3305 MEDIA DRIVER
 M:	Michael Krufky <mkrufky@linuxtv.org>
 L:	linux-media@vger.kernel.org
-W:	http://linuxtv.org/
+W:	https://linuxtv.org
 W:	http://github.com/mkrufky
 Q:	http://patchwork.linuxtv.org/project/linux-media/list/
 T:	git git://linuxtv.org/mkrufky/tuners.git
@@ -6521,7 +6530,7 @@ F:	drivers/hwmon/lm95234.c
 LME2510 MEDIA DRIVER
 M:	Malcolm Priestley <tvboxspy@gmail.com>
 L:	linux-media@vger.kernel.org
-W:	http://linuxtv.org/
+W:	https://linuxtv.org
 Q:	http://patchwork.linuxtv.org/project/linux-media/list/
 S:	Maintained
 F:	drivers/media/usb/dvb-usb-v2/lmedm04*
@@ -6627,7 +6636,7 @@ F:	arch/m68k/hp300/
 M88DS3103 MEDIA DRIVER
 M:	Antti Palosaari <crope@iki.fi>
 L:	linux-media@vger.kernel.org
-W:	http://linuxtv.org/
+W:	https://linuxtv.org
 W:	http://palosaari.fi/linux/
 Q:	http://patchwork.linuxtv.org/project/linux-media/list/
 T:	git git://linuxtv.org/anttip/media_tree.git
@@ -6637,7 +6646,7 @@ F:	drivers/media/dvb-frontends/m88ds3103*
 M88RS2000 MEDIA DRIVER
 M:	Malcolm Priestley <tvboxspy@gmail.com>
 L:	linux-media@vger.kernel.org
-W:	http://linuxtv.org/
+W:	https://linuxtv.org
 Q:	http://patchwork.linuxtv.org/project/linux-media/list/
 S:	Maintained
 F:	drivers/media/dvb-frontends/m88rs2000*
@@ -6816,7 +6825,7 @@ MAXIRADIO FM RADIO RECEIVER DRIVER
 M:	Hans Verkuil <hverkuil@xs4all.nl>
 L:	linux-media@vger.kernel.org
 T:	git git://linuxtv.org/media_tree.git
-W:	http://linuxtv.org
+W:	https://linuxtv.org
 S:	Maintained
 F:	drivers/media/radio/radio-maxiradio*
 
@@ -6838,7 +6847,7 @@ F:	drivers/media/platform/vsp1/
 MEDIA DRIVERS FOR ASCOT2E
 M:	Sergey Kozlov <serjk@netup.ru>
 L:	linux-media@vger.kernel.org
-W:	http://linuxtv.org
+W:	https://linuxtv.org
 W:	http://netup.tv/
 T:	git git://linuxtv.org/media_tree.git
 S:	Supported
@@ -6847,7 +6856,7 @@ F:	drivers/media/dvb-frontends/ascot2e*
 MEDIA DRIVERS FOR CXD2841ER
 M:	Sergey Kozlov <serjk@netup.ru>
 L:	linux-media@vger.kernel.org
-W:	http://linuxtv.org/
+W:	https://linuxtv.org
 W:	http://netup.tv/
 T:	git git://linuxtv.org/media_tree.git
 S:	Supported
@@ -6856,7 +6865,7 @@ F:	drivers/media/dvb-frontends/cxd2841er*
 MEDIA DRIVERS FOR HORUS3A
 M:	Sergey Kozlov <serjk@netup.ru>
 L:	linux-media@vger.kernel.org
-W:	http://linuxtv.org/
+W:	https://linuxtv.org
 W:	http://netup.tv/
 T:	git git://linuxtv.org/media_tree.git
 S:	Supported
@@ -6865,7 +6874,7 @@ F:	drivers/media/dvb-frontends/horus3a*
 MEDIA DRIVERS FOR LNBH25
 M:	Sergey Kozlov <serjk@netup.ru>
 L:	linux-media@vger.kernel.org
-W:	http://linuxtv.org/
+W:	https://linuxtv.org
 W:	http://netup.tv/
 T:	git git://linuxtv.org/media_tree.git
 S:	Supported
@@ -6874,7 +6883,7 @@ F:	drivers/media/dvb-frontends/lnbh25*
 MEDIA DRIVERS FOR NETUP PCI UNIVERSAL DVB devices
 M:	Sergey Kozlov <serjk@netup.ru>
 L:	linux-media@vger.kernel.org
-W:	http://linuxtv.org/
+W:	https://linuxtv.org
 W:	http://netup.tv/
 T:	git git://linuxtv.org/media_tree.git
 S:	Supported
@@ -6884,7 +6893,7 @@ MEDIA INPUT INFRASTRUCTURE (V4L/DVB)
 M:	Mauro Carvalho Chehab <mchehab@osg.samsung.com>
 P:	LinuxTV.org Project
 L:	linux-media@vger.kernel.org
-W:	http://linuxtv.org
+W:	https://linuxtv.org
 Q:	http://patchwork.kernel.org/project/linux-media/list/
 T:	git git://linuxtv.org/media_tree.git
 S:	Maintained
@@ -6893,6 +6902,7 @@ F:	Documentation/video4linux/
 F:	Documentation/DocBook/media/
 F:	drivers/media/
 F:	drivers/staging/media/
+F:	include/linux/platform_data/media/
 F:	include/media/
 F:	include/uapi/linux/dvb/
 F:	include/uapi/linux/videodev2.h
@@ -7044,7 +7054,7 @@ MIROSOUND PCM20 FM RADIO RECEIVER DRIVER
 M:	Hans Verkuil <hverkuil@xs4all.nl>
 L:	linux-media@vger.kernel.org
 T:	git git://linuxtv.org/media_tree.git
-W:	http://linuxtv.org
+W:	https://linuxtv.org
 S:	Odd Fixes
 F:	drivers/media/radio/radio-miropcm20*
 
@@ -7080,7 +7090,7 @@ F:	drivers/iio/temperature/mlx90614.c
 MN88472 MEDIA DRIVER
 M:	Antti Palosaari <crope@iki.fi>
 L:	linux-media@vger.kernel.org
-W:	http://linuxtv.org/
+W:	https://linuxtv.org
 W:	http://palosaari.fi/linux/
 Q:	http://patchwork.linuxtv.org/project/linux-media/list/
 T:	git git://linuxtv.org/anttip/media_tree.git
@@ -7091,7 +7101,7 @@ F:	drivers/media/dvb-frontends/mn88472.h
 MN88473 MEDIA DRIVER
 M:	Antti Palosaari <crope@iki.fi>
 L:	linux-media@vger.kernel.org
-W:	http://linuxtv.org/
+W:	https://linuxtv.org
 W:	http://palosaari.fi/linux/
 Q:	http://patchwork.linuxtv.org/project/linux-media/list/
 T:	git git://linuxtv.org/anttip/media_tree.git
@@ -7146,7 +7156,7 @@ F:	drivers/platform/x86/msi-wmi.c
 MSI001 MEDIA DRIVER
 M:	Antti Palosaari <crope@iki.fi>
 L:	linux-media@vger.kernel.org
-W:	http://linuxtv.org/
+W:	https://linuxtv.org
 W:	http://palosaari.fi/linux/
 Q:	http://patchwork.linuxtv.org/project/linux-media/list/
 T:	git git://linuxtv.org/anttip/media_tree.git
@@ -7156,7 +7166,7 @@ F:	drivers/media/tuners/msi001*
 MSI2500 MEDIA DRIVER
 M:	Antti Palosaari <crope@iki.fi>
 L:	linux-media@vger.kernel.org
-W:	http://linuxtv.org/
+W:	https://linuxtv.org
 W:	http://palosaari.fi/linux/
 Q:	http://patchwork.linuxtv.org/project/linux-media/list/
 T:	git git://linuxtv.org/anttip/media_tree.git
@@ -7175,7 +7185,7 @@ L:	linux-media@vger.kernel.org
 T:	git git://linuxtv.org/media_tree.git
 S:	Maintained
 F:	drivers/media/i2c/mt9m032.c
-F:	include/media/mt9m032.h
+F:	include/media/i2c/mt9m032.h
 
 MT9P031 APTINA CAMERA SENSOR
 M:	Laurent Pinchart <laurent.pinchart@ideasonboard.com>
@@ -7183,7 +7193,7 @@ L:	linux-media@vger.kernel.org
 T:	git git://linuxtv.org/media_tree.git
 S:	Maintained
 F:	drivers/media/i2c/mt9p031.c
-F:	include/media/mt9p031.h
+F:	include/media/i2c/mt9p031.h
 
 MT9T001 APTINA CAMERA SENSOR
 M:	Laurent Pinchart <laurent.pinchart@ideasonboard.com>
@@ -7191,7 +7201,7 @@ L:	linux-media@vger.kernel.org
 T:	git git://linuxtv.org/media_tree.git
 S:	Maintained
 F:	drivers/media/i2c/mt9t001.c
-F:	include/media/mt9t001.h
+F:	include/media/i2c/mt9t001.h
 
 MT9V032 APTINA CAMERA SENSOR
 M:	Laurent Pinchart <laurent.pinchart@ideasonboard.com>
@@ -7200,7 +7210,7 @@ T:	git git://linuxtv.org/media_tree.git
 S:	Maintained
 F:	Documentation/devicetree/bindings/media/i2c/mt9v032.txt
 F:	drivers/media/i2c/mt9v032.c
-F:	include/media/mt9v032.h
+F:	include/media/i2c/mt9v032.h
 
 MULTIFUNCTION DEVICES (MFD)
 M:	Lee Jones <lee.jones@linaro.org>
@@ -7244,7 +7254,7 @@ F:	drivers/usb/musb/
 MXL5007T MEDIA DRIVER
 M:	Michael Krufky <mkrufky@linuxtv.org>
 L:	linux-media@vger.kernel.org
-W:	http://linuxtv.org/
+W:	https://linuxtv.org
 W:	http://github.com/mkrufky
 Q:	http://patchwork.linuxtv.org/project/linux-media/list/
 T:	git git://linuxtv.org/mkrufky/tuners.git
@@ -8745,7 +8755,7 @@ F:	include/uapi/linux/qnxtypes.h
 QT1010 MEDIA DRIVER
 M:	Antti Palosaari <crope@iki.fi>
 L:	linux-media@vger.kernel.org
-W:	http://linuxtv.org/
+W:	https://linuxtv.org
 W:	http://palosaari.fi/linux/
 Q:	http://patchwork.linuxtv.org/project/linux-media/list/
 T:	git git://linuxtv.org/anttip/media_tree.git
@@ -9038,7 +9048,7 @@ F:	net/rose/
 RTL2830 MEDIA DRIVER
 M:	Antti Palosaari <crope@iki.fi>
 L:	linux-media@vger.kernel.org
-W:	http://linuxtv.org/
+W:	https://linuxtv.org
 W:	http://palosaari.fi/linux/
 Q:	http://patchwork.linuxtv.org/project/linux-media/list/
 T:	git git://linuxtv.org/anttip/media_tree.git
@@ -9048,7 +9058,7 @@ F:	drivers/media/dvb-frontends/rtl2830*
 RTL2832 MEDIA DRIVER
 M:	Antti Palosaari <crope@iki.fi>
 L:	linux-media@vger.kernel.org
-W:	http://linuxtv.org/
+W:	https://linuxtv.org
 W:	http://palosaari.fi/linux/
 Q:	http://patchwork.linuxtv.org/project/linux-media/list/
 T:	git git://linuxtv.org/anttip/media_tree.git
@@ -9058,7 +9068,7 @@ F:	drivers/media/dvb-frontends/rtl2832*
 RTL2832_SDR MEDIA DRIVER
 M:	Antti Palosaari <crope@iki.fi>
 L:	linux-media@vger.kernel.org
-W:	http://linuxtv.org/
+W:	https://linuxtv.org
 W:	http://palosaari.fi/linux/
 Q:	http://patchwork.linuxtv.org/project/linux-media/list/
 T:	git git://linuxtv.org/anttip/media_tree.git
@@ -9189,14 +9199,14 @@ SAA6588 RDS RECEIVER DRIVER
 M:	Hans Verkuil <hverkuil@xs4all.nl>
 L:	linux-media@vger.kernel.org
 T:	git git://linuxtv.org/media_tree.git
-W:	http://linuxtv.org
+W:	https://linuxtv.org
 S:	Odd Fixes
 F:	drivers/media/i2c/saa6588*
 
 SAA7134 VIDEO4LINUX DRIVER
 M:	Mauro Carvalho Chehab <mchehab@osg.samsung.com>
 L:	linux-media@vger.kernel.org
-W:	http://linuxtv.org
+W:	https://linuxtv.org
 T:	git git://linuxtv.org/media_tree.git
 S:	Odd fixes
 F:	Documentation/video4linux/*.saa7134
@@ -9258,7 +9268,7 @@ L:	linux-media@vger.kernel.org
 L:	linux-samsung-soc@vger.kernel.org (moderated for non-subscribers)
 S:	Maintained
 F:	drivers/media/platform/s3c-camif/
-F:	include/media/s3c_camif.h
+F:	include/media/drv-intf/s3c_camif.h
 
 SAMSUNG S5C73M3 CAMERA DRIVER
 M:	Kyungmin Park <kyungmin.park@samsung.com>
@@ -9633,7 +9643,7 @@ F:	drivers/misc/sgi-xp/
 SI2157 MEDIA DRIVER
 M:	Antti Palosaari <crope@iki.fi>
 L:	linux-media@vger.kernel.org
-W:	http://linuxtv.org/
+W:	https://linuxtv.org
 W:	http://palosaari.fi/linux/
 Q:	http://patchwork.linuxtv.org/project/linux-media/list/
 T:	git git://linuxtv.org/anttip/media_tree.git
@@ -9643,7 +9653,7 @@ F:	drivers/media/tuners/si2157*
 SI2168 MEDIA DRIVER
 M:	Antti Palosaari <crope@iki.fi>
 L:	linux-media@vger.kernel.org
-W:	http://linuxtv.org/
+W:	https://linuxtv.org
 W:	http://palosaari.fi/linux/
 Q:	http://patchwork.linuxtv.org/project/linux-media/list/
 T:	git git://linuxtv.org/anttip/media_tree.git
@@ -9654,7 +9664,7 @@ SI470X FM RADIO RECEIVER I2C DRIVER
 M:	Hans Verkuil <hverkuil@xs4all.nl>
 L:	linux-media@vger.kernel.org
 T:	git git://linuxtv.org/media_tree.git
-W:	http://linuxtv.org
+W:	https://linuxtv.org
 S:	Odd Fixes
 F:	drivers/media/radio/si470x/radio-si470x-i2c.c
 
@@ -9662,7 +9672,7 @@ SI470X FM RADIO RECEIVER USB DRIVER
 M:	Hans Verkuil <hverkuil@xs4all.nl>
 L:	linux-media@vger.kernel.org
 T:	git git://linuxtv.org/media_tree.git
-W:	http://linuxtv.org
+W:	https://linuxtv.org
 S:	Maintained
 F:	drivers/media/radio/si470x/radio-si470x-common.c
 F:	drivers/media/radio/si470x/radio-si470x.h
@@ -9672,7 +9682,7 @@ SI4713 FM RADIO TRANSMITTER I2C DRIVER
 M:	Eduardo Valentin <edubezval@gmail.com>
 L:	linux-media@vger.kernel.org
 T:	git git://linuxtv.org/media_tree.git
-W:	http://linuxtv.org
+W:	https://linuxtv.org
 S:	Odd Fixes
 F:	drivers/media/radio/si4713/si4713.?
 
@@ -9680,7 +9690,7 @@ SI4713 FM RADIO TRANSMITTER PLATFORM DRIVER
 M:	Eduardo Valentin <edubezval@gmail.com>
 L:	linux-media@vger.kernel.org
 T:	git git://linuxtv.org/media_tree.git
-W:	http://linuxtv.org
+W:	https://linuxtv.org
 S:	Odd Fixes
 F:	drivers/media/radio/si4713/radio-platform-si4713.c
 
@@ -9688,14 +9698,14 @@ SI4713 FM RADIO TRANSMITTER USB DRIVER
 M:	Hans Verkuil <hverkuil@xs4all.nl>
 L:	linux-media@vger.kernel.org
 T:	git git://linuxtv.org/media_tree.git
-W:	http://linuxtv.org
+W:	https://linuxtv.org
 S:	Maintained
 F:	drivers/media/radio/si4713/radio-usb-si4713.c
 
 SIANO DVB DRIVER
 M:	Mauro Carvalho Chehab <mchehab@osg.samsung.com>
 L:	linux-media@vger.kernel.org
-W:	http://linuxtv.org
+W:	https://linuxtv.org
 T:	git git://linuxtv.org/media_tree.git
 S:	Odd fixes
 F:	drivers/media/common/siano/
@@ -9720,7 +9730,7 @@ SH_VOU V4L2 OUTPUT DRIVER
 L:	linux-media@vger.kernel.org
 S:	Orphan
 F:	drivers/media/platform/sh_vou.c
-F:	include/media/sh_vou.h
+F:	include/media/drv-intf/sh_vou.h
 
 SIMPLE FIRMWARE INTERFACE (SFI)
 M:	Len Brown <lenb@kernel.org>
@@ -9761,7 +9771,7 @@ F:	drivers/i2c/busses/i2c-davinci.c
 TI DAVINCI SERIES MEDIA DRIVER
 M:	"Lad, Prabhakar" <prabhakar.csengg@gmail.com>
 L:	linux-media@vger.kernel.org
-W:	http://linuxtv.org/
+W:	https://linuxtv.org
 Q:	http://patchwork.linuxtv.org/project/linux-media/list/
 T:	git git://linuxtv.org/mhadli/v4l-dvb-davinci_devices.git
 S:	Maintained
@@ -9771,7 +9781,7 @@ F:	include/media/davinci/
 TI AM437X VPFE DRIVER
 M:	"Lad, Prabhakar" <prabhakar.csengg@gmail.com>
 L:	linux-media@vger.kernel.org
-W:	http://linuxtv.org/
+W:	https://linuxtv.org
 Q:	http://patchwork.linuxtv.org/project/linux-media/list/
 T:	git git://linuxtv.org/mhadli/v4l-dvb-davinci_devices.git
 S:	Maintained
@@ -9780,12 +9790,12 @@ F:	drivers/media/platform/am437x/
 OV2659 OMNIVISION SENSOR DRIVER
 M:	"Lad, Prabhakar" <prabhakar.csengg@gmail.com>
 L:	linux-media@vger.kernel.org
-W:	http://linuxtv.org/
+W:	https://linuxtv.org
 Q:	http://patchwork.linuxtv.org/project/linux-media/list/
 T:	git git://linuxtv.org/mhadli/v4l-dvb-davinci_devices.git
 S:	Maintained
 F:	drivers/media/i2c/ov2659.c
-F:	include/media/ov2659.h
+F:	include/media/i2c/ov2659.h
 
 SILICON MOTION SM712 FRAME BUFFER DRIVER
 M:	Sudip Mukherjee <sudipm.mukherjee@gmail.com>
@@ -9874,7 +9884,7 @@ M:	Sakari Ailus <sakari.ailus@iki.fi>
 L:	linux-media@vger.kernel.org
 S:	Maintained
 F:	drivers/media/i2c/smiapp/
-F:	include/media/smiapp.h
+F:	include/media/i2c/smiapp.h
 F:	drivers/media/i2c/smiapp-pll.c
 F:	drivers/media/i2c/smiapp-pll.h
 F:	include/uapi/linux/smiapp.h
@@ -10038,7 +10048,7 @@ F:	sound/soc/soc-generic-dmaengine-pcm.c
 SP2 MEDIA DRIVER
 M:	Olli Salonen <olli.salonen@iki.fi>
 L:	linux-media@vger.kernel.org
-W:	http://linuxtv.org/
+W:	https://linuxtv.org
 Q:	http://patchwork.linuxtv.org/project/linux-media/list/
 S:	Maintained
 F:	drivers/media/dvb-frontends/sp2*
@@ -10400,7 +10410,7 @@ F:	net/ipv4/tcp_lp.c
 TDA10071 MEDIA DRIVER
 M:	Antti Palosaari <crope@iki.fi>
 L:	linux-media@vger.kernel.org
-W:	http://linuxtv.org/
+W:	https://linuxtv.org
 W:	http://palosaari.fi/linux/
 Q:	http://patchwork.linuxtv.org/project/linux-media/list/
 T:	git git://linuxtv.org/anttip/media_tree.git
@@ -10410,7 +10420,7 @@ F:	drivers/media/dvb-frontends/tda10071*
 TDA18212 MEDIA DRIVER
 M:	Antti Palosaari <crope@iki.fi>
 L:	linux-media@vger.kernel.org
-W:	http://linuxtv.org/
+W:	https://linuxtv.org
 W:	http://palosaari.fi/linux/
 Q:	http://patchwork.linuxtv.org/project/linux-media/list/
 T:	git git://linuxtv.org/anttip/media_tree.git
@@ -10420,7 +10430,7 @@ F:	drivers/media/tuners/tda18212*
 TDA18218 MEDIA DRIVER
 M:	Antti Palosaari <crope@iki.fi>
 L:	linux-media@vger.kernel.org
-W:	http://linuxtv.org/
+W:	https://linuxtv.org
 W:	http://palosaari.fi/linux/
 Q:	http://patchwork.linuxtv.org/project/linux-media/list/
 T:	git git://linuxtv.org/anttip/media_tree.git
@@ -10430,7 +10440,7 @@ F:	drivers/media/tuners/tda18218*
 TDA18271 MEDIA DRIVER
 M:	Michael Krufky <mkrufky@linuxtv.org>
 L:	linux-media@vger.kernel.org
-W:	http://linuxtv.org/
+W:	https://linuxtv.org
 W:	http://github.com/mkrufky
 Q:	http://patchwork.linuxtv.org/project/linux-media/list/
 T:	git git://linuxtv.org/mkrufky/tuners.git
@@ -10440,7 +10450,7 @@ F:	drivers/media/tuners/tda18271*
 TDA827x MEDIA DRIVER
 M:	Michael Krufky <mkrufky@linuxtv.org>
 L:	linux-media@vger.kernel.org
-W:	http://linuxtv.org/
+W:	https://linuxtv.org
 W:	http://github.com/mkrufky
 Q:	http://patchwork.linuxtv.org/project/linux-media/list/
 T:	git git://linuxtv.org/mkrufky/tuners.git
@@ -10450,7 +10460,7 @@ F:	drivers/media/tuners/tda8290.*
 TDA8290 MEDIA DRIVER
 M:	Michael Krufky <mkrufky@linuxtv.org>
 L:	linux-media@vger.kernel.org
-W:	http://linuxtv.org/
+W:	https://linuxtv.org
 W:	http://github.com/mkrufky
 Q:	http://patchwork.linuxtv.org/project/linux-media/list/
 T:	git git://linuxtv.org/mkrufky/tuners.git
@@ -10461,14 +10471,14 @@ TDA9840 MEDIA DRIVER
 M:	Hans Verkuil <hverkuil@xs4all.nl>
 L:	linux-media@vger.kernel.org
 T:	git git://linuxtv.org/media_tree.git
-W:	http://linuxtv.org
+W:	https://linuxtv.org
 S:	Maintained
 F:	drivers/media/i2c/tda9840*
 
 TEA5761 TUNER DRIVER
 M:	Mauro Carvalho Chehab <mchehab@osg.samsung.com>
 L:	linux-media@vger.kernel.org
-W:	http://linuxtv.org
+W:	https://linuxtv.org
 T:	git git://linuxtv.org/media_tree.git
 S:	Odd fixes
 F:	drivers/media/tuners/tea5761.*
@@ -10476,7 +10486,7 @@ F:	drivers/media/tuners/tea5761.*
 TEA5767 TUNER DRIVER
 M:	Mauro Carvalho Chehab <mchehab@osg.samsung.com>
 L:	linux-media@vger.kernel.org
-W:	http://linuxtv.org
+W:	https://linuxtv.org
 T:	git git://linuxtv.org/media_tree.git
 S:	Maintained
 F:	drivers/media/tuners/tea5767.*
@@ -10485,7 +10495,7 @@ TEA6415C MEDIA DRIVER
 M:	Hans Verkuil <hverkuil@xs4all.nl>
 L:	linux-media@vger.kernel.org
 T:	git git://linuxtv.org/media_tree.git
-W:	http://linuxtv.org
+W:	https://linuxtv.org
 S:	Maintained
 F:	drivers/media/i2c/tea6415c*
 
@@ -10493,7 +10503,7 @@ TEA6420 MEDIA DRIVER
 M:	Hans Verkuil <hverkuil@xs4all.nl>
 L:	linux-media@vger.kernel.org
 T:	git git://linuxtv.org/media_tree.git
-W:	http://linuxtv.org
+W:	https://linuxtv.org
 S:	Maintained
 F:	drivers/media/i2c/tea6420*
 
@@ -10591,7 +10601,7 @@ THANKO'S RAREMONO AM/FM/SW RADIO RECEIVER USB DRIVER
 M:	Hans Verkuil <hverkuil@xs4all.nl>
 L:	linux-media@vger.kernel.org
 T:	git git://linuxtv.org/media_tree.git
-W:	http://linuxtv.org
+W:	https://linuxtv.org
 S:	Maintained
 F:	drivers/media/radio/radio-raremono.c
 
@@ -10815,7 +10825,7 @@ M:	Mats Randgaard <matrandg@cisco.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
 F:	drivers/media/i2c/tc358743*
-F:	include/media/tc358743.h
+F:	include/media/i2c/tc358743.h
 
 TMIO MMC DRIVER
 M:	Ian Molton <ian@mnementh.co.uk>
@@ -10843,7 +10853,7 @@ F:	mm/shmem.c
 TM6000 VIDEO4LINUX DRIVER
 M:	Mauro Carvalho Chehab <mchehab@osg.samsung.com>
 L:	linux-media@vger.kernel.org
-W:	http://linuxtv.org
+W:	https://linuxtv.org
 T:	git git://linuxtv.org/media_tree.git
 S:	Odd fixes
 F:	drivers/media/usb/tm6000/
@@ -10852,7 +10862,7 @@ TW68 VIDEO4LINUX DRIVER
 M:	Hans Verkuil <hverkuil@xs4all.nl>
 L:	linux-media@vger.kernel.org
 T:	git git://linuxtv.org/media_tree.git
-W:	http://linuxtv.org
+W:	https://linuxtv.org
 S:	Odd Fixes
 F:	drivers/media/pci/tw68/
 
@@ -10913,7 +10923,7 @@ F:	include/uapi/linux/tty.h
 TUA9001 MEDIA DRIVER
 M:	Antti Palosaari <crope@iki.fi>
 L:	linux-media@vger.kernel.org
-W:	http://linuxtv.org/
+W:	https://linuxtv.org
 W:	http://palosaari.fi/linux/
 Q:	http://patchwork.linuxtv.org/project/linux-media/list/
 T:	git git://linuxtv.org/anttip/media_tree.git
@@ -11260,7 +11270,7 @@ USB VISION DRIVER
 M:	Hans Verkuil <hverkuil@xs4all.nl>
 L:	linux-media@vger.kernel.org
 T:	git git://linuxtv.org/media_tree.git
-W:	http://linuxtv.org
+W:	https://linuxtv.org
 S:	Odd Fixes
 F:	drivers/media/usb/usbvision/
 
@@ -11474,7 +11484,7 @@ VIVID VIRTUAL VIDEO DRIVER
 M:	Hans Verkuil <hverkuil@xs4all.nl>
 L:	linux-media@vger.kernel.org
 T:	git git://linuxtv.org/media_tree.git
-W:	http://linuxtv.org
+W:	https://linuxtv.org
 S:	Maintained
 F:	drivers/media/platform/vivid/*
 
@@ -11763,7 +11773,7 @@ F:	arch/x86/entry/vdso/
 XC2028/3028 TUNER DRIVER
 M:	Mauro Carvalho Chehab <mchehab@osg.samsung.com>
 L:	linux-media@vger.kernel.org
-W:	http://linuxtv.org
+W:	https://linuxtv.org
 T:	git git://linuxtv.org/media_tree.git
 S:	Maintained
 F:	drivers/media/tuners/tuner-xc2028.*
@@ -11932,7 +11942,7 @@ ZR36067 VIDEO FOR LINUX DRIVER
 L:	mjpeg-users@lists.sourceforge.net
 L:	linux-media@vger.kernel.org
 W:	http://mjpeg.sourceforge.net/driver-zoran/
-T:	hg http://linuxtv.org/hg/v4l-dvb
+T:	hg https://linuxtv.org/hg/v4l-dvb
 S:	Odd Fixes
 F:	drivers/media/pci/zoran/
 

arch/arm/boot/dts/stihxxx-b2120.dtsi

@@ -6,6 +6,9 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
+#include <dt-bindings/clock/stih407-clks.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/media/c8sectpfe.h>
 / {
 	soc {
 		sbc_serial0: serial@9530000 {
@@ -35,12 +38,18 @@
 			status = "okay";
 		};
 
-		i2c@9842000 {
+		ssc2: i2c@9842000 {
 			status = "okay";
+			clock-frequency = <100000>;
+			st,i2c-min-scl-pulse-width-us = <0>;
+			st,i2c-min-sda-pulse-width-us = <5>;
 		};
 
-		i2c@9843000 {
+		ssc3: i2c@9843000 {
 			status = "okay";
+			clock-frequency = <100000>;
+			st,i2c-min-scl-pulse-width-us = <0>;
+			st,i2c-min-sda-pulse-width-us = <5>;
 		};
 
 		i2c@9844000 {
@@ -93,5 +102,38 @@
 			phy-mode = "rgmii";
 			fixed-link = <0 1 1000 0 0>;
 		};
+
+		demux@08a20000 {
+			compatible	= "st,stih407-c8sectpfe";
+			status		= "okay";
+			reg		= <0x08a20000 0x10000>,
+					  <0x08a00000 0x4000>;
+			reg-names	= "c8sectpfe", "c8sectpfe-ram";
+			interrupts	= <GIC_SPI 34 IRQ_TYPE_NONE>,
+					  <GIC_SPI 35 IRQ_TYPE_NONE>;
+			interrupt-names	= "c8sectpfe-error-irq",
+					  "c8sectpfe-idle-irq";
+			pinctrl-0	= <&pinctrl_tsin0_serial>;
+			pinctrl-1	= <&pinctrl_tsin0_parallel>;
+			pinctrl-2	= <&pinctrl_tsin3_serial>;
+			pinctrl-3	= <&pinctrl_tsin4_serial_alt3>;
+			pinctrl-4	= <&pinctrl_tsin5_serial_alt1>;
+			pinctrl-names	= "tsin0-serial",
+					  "tsin0-parallel",
+					  "tsin3-serial",
+					  "tsin4-serial",
+					  "tsin5-serial";
+			clocks		= <&clk_s_c0_flexgen CLK_PROC_STFE>;
+			clock-names	= "c8sectpfe";
+
+			/* tsin0 is TSA on NIMA */
+			tsin0: port@0 {
+				tsin-num	= <0>;
+				serial-not-parallel;
+				i2c-bus		= <&ssc2>;
+				reset-gpios	= <&pio15 4 GPIO_ACTIVE_HIGH>;
+				dvb-card	= <STV0367_TDA18212_NIMA_1>;
+			};
+		};
 	};
 };

arch/arm/mach-davinci/board-da850-evm.c

@@ -49,8 +49,8 @@
 #include <asm/mach/arch.h>
 #include <asm/system_info.h>
 
-#include <media/tvp514x.h>
-#include <media/adv7343.h>
+#include <media/i2c/tvp514x.h>
+#include <media/i2c/adv7343.h>
 
 #define DA850_EVM_PHY_ID		"davinci_mdio-0:00"
 #define DA850_LCD_PWR_PIN		GPIO_TO_PIN(2, 8)

arch/arm/mach-davinci/board-dm355-evm.c

@@ -19,7 +19,7 @@
 #include <linux/gpio.h>
 #include <linux/clk.h>
 #include <linux/videodev2.h>
-#include <media/tvp514x.h>
+#include <media/i2c/tvp514x.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/eeprom.h>
 #include <linux/platform_data/gpio-davinci.h>

arch/arm/mach-davinci/board-dm365-evm.c

@@ -40,8 +40,8 @@
 #include <linux/platform_data/mtd-davinci.h>
 #include <linux/platform_data/keyscan-davinci.h>
 
-#include <media/ths7303.h>
-#include <media/tvp514x.h>
+#include <media/i2c/ths7303.h>
+#include <media/i2c/tvp514x.h>
 
 #include "davinci.h"
 

arch/arm/mach-davinci/board-dm644x-evm.c

@@ -26,7 +26,7 @@
 #include <linux/v4l2-dv-timings.h>
 #include <linux/export.h>
 
-#include <media/tvp514x.h>
+#include <media/i2c/tvp514x.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>

arch/arm/mach-davinci/board-dm646x-evm.c

@@ -25,8 +25,8 @@
 #include <linux/platform_data/at24.h>
 #include <linux/i2c/pcf857x.h>
 
-#include <media/tvp514x.h>
-#include <media/adv7343.h>
+#include <media/i2c/tvp514x.h>
+#include <media/i2c/adv7343.h>
 
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/nand.h>

arch/arm/mach-imx/devices/devices-common.h

@@ -177,7 +177,7 @@ struct platform_device *__init imx_add_imx_uart_1irq(
 		const struct imxuart_platform_data *pdata);
 
 #include <linux/platform_data/video-mx3fb.h>
-#include <linux/platform_data/camera-mx3.h>
+#include <linux/platform_data/media/camera-mx3.h>
 struct imx_ipu_core_data {
 	resource_size_t iobase;
 	resource_size_t synirq;
@@ -192,7 +192,7 @@ struct platform_device *__init imx_add_mx3_sdc_fb(
 		const struct imx_ipu_core_data *data,
 		struct mx3fb_platform_data *pdata);
 
-#include <linux/platform_data/camera-mx2.h>
+#include <linux/platform_data/media/camera-mx2.h>
 struct imx_mx2_camera_data {
 	const char *devid;
 	resource_size_t iobasecsi;

arch/arm/mach-omap1/include/mach/camera.h

@@ -1,7 +1,7 @@
 #ifndef __ASM_ARCH_CAMERA_H_
 #define __ASM_ARCH_CAMERA_H_
 
-#include <media/omap1_camera.h>
+#include <linux/platform_data/media/omap1_camera.h>
 
 void omap1_camera_init(void *);
 

arch/arm/mach-omap2/board-rx51-peripherals.c

@@ -39,7 +39,7 @@
 
 #include <sound/tlv320aic3x.h>
 #include <sound/tpa6130a2-plat.h>
-#include <media/si4713.h>
+#include <linux/platform_data/media/si4713.h>
 #include <linux/platform_data/leds-lp55xx.h>
 
 #include <linux/platform_data/tsl2563.h>
@@ -48,7 +48,7 @@
 #include <video/omap-panel-data.h>
 
 #if defined(CONFIG_IR_RX51) || defined(CONFIG_IR_RX51_MODULE)
-#include <media/ir-rx51.h>
+#include <linux/platform_data/media/ir-rx51.h>
 #endif
 
 #include "mux.h"

arch/arm/mach-pxa/devices.c

@@ -14,7 +14,7 @@
 #include <mach/irqs.h>
 #include <linux/platform_data/usb-ohci-pxa27x.h>
 #include <linux/platform_data/keypad-pxa27x.h>
-#include <linux/platform_data/camera-pxa.h>
+#include <linux/platform_data/media/camera-pxa.h>
 #include <mach/audio.h>
 #include <mach/hardware.h>
 #include <linux/platform_data/mmp_dma.h>

arch/arm/mach-pxa/em-x270.c

@@ -46,7 +46,7 @@
 #include <linux/platform_data/usb-ohci-pxa27x.h>
 #include <linux/platform_data/mmc-pxamci.h>
 #include <linux/platform_data/keypad-pxa27x.h>
-#include <linux/platform_data/camera-pxa.h>
+#include <linux/platform_data/media/camera-pxa.h>
 
 #include "generic.h"
 #include "devices.h"

arch/arm/mach-pxa/ezx.c

@@ -34,7 +34,7 @@
 #include <linux/platform_data/usb-ohci-pxa27x.h>
 #include <mach/hardware.h>
 #include <linux/platform_data/keypad-pxa27x.h>
-#include <linux/platform_data/camera-pxa.h>
+#include <linux/platform_data/media/camera-pxa.h>
 
 #include "devices.h"
 #include "generic.h"

arch/arm/mach-pxa/mioa701.c

@@ -54,7 +54,7 @@
 #include <linux/platform_data/mmc-pxamci.h>
 #include <mach/udc.h>
 #include <mach/pxa27x-udc.h>
-#include <linux/platform_data/camera-pxa.h>
+#include <linux/platform_data/media/camera-pxa.h>
 #include <mach/audio.h>
 #include <mach/smemc.h>
 #include <media/soc_camera.h>

arch/arm/mach-pxa/palmtreo.c

@@ -43,7 +43,7 @@
 #include <linux/platform_data/usb-ohci-pxa27x.h>
 #include <mach/pxa2xx-regs.h>
 #include <linux/platform_data/asoc-palm27x.h>
-#include <linux/platform_data/camera-pxa.h>
+#include <linux/platform_data/media/camera-pxa.h>
 #include <mach/palm27x.h>
 
 #include <sound/pxa2xx-lib.h>

arch/arm/mach-pxa/palmz72.c

@@ -49,7 +49,7 @@
 #include <mach/palm27x.h>
 
 #include <mach/pm.h>
-#include <linux/platform_data/camera-pxa.h>
+#include <linux/platform_data/media/camera-pxa.h>
 
 #include <media/soc_camera.h>
 

arch/arm/mach-pxa/pcm990-baseboard.c

@@ -27,10 +27,10 @@
 #include <linux/pwm.h>
 #include <linux/pwm_backlight.h>
 
-#include <media/mt9v022.h>
+#include <media/i2c/mt9v022.h>
 #include <media/soc_camera.h>
 
-#include <linux/platform_data/camera-pxa.h>
+#include <linux/platform_data/media/camera-pxa.h>
 #include <asm/mach/map.h>
 #include <mach/pxa27x.h>
 #include <mach/audio.h>

arch/arm/plat-samsung/devs.c

@@ -36,7 +36,7 @@
 #include <linux/platform_data/s3c-hsotg.h>
 #include <linux/platform_data/dma-s3c24xx.h>
 
-#include <media/s5p_hdmi.h>
+#include <linux/platform_data/media/s5p_hdmi.h>
 
 #include <asm/irq.h>
 #include <asm/mach/arch.h>

arch/blackfin/mach-bf561/boards/ezkit.c

@@ -443,7 +443,7 @@ static const struct ppi_info ppi_info = {
 };
 
 #if IS_ENABLED(CONFIG_VIDEO_ADV7183)
-#include <media/adv7183.h>
+#include <media/i2c/adv7183.h>
 static struct v4l2_input adv7183_inputs[] = {
 	{
 		.index = 0,

arch/blackfin/mach-bf609/boards/ezkit.c

@@ -933,7 +933,7 @@ static struct bfin_capture_config bfin_capture_data = {
 #endif
 
 #if IS_ENABLED(CONFIG_VIDEO_ADV7842)
-#include <media/adv7842.h>
+#include <media/i2c/adv7842.h>
 
 static struct v4l2_input adv7842_inputs[] = {
 	{
@@ -1084,7 +1084,7 @@ static const struct ppi_info ppi_info = {
 };
 
 #if IS_ENABLED(CONFIG_VIDEO_ADV7511)
-#include <media/adv7511.h>
+#include <media/i2c/adv7511.h>
 
 static struct v4l2_output adv7511_outputs[] = {
 	{
@@ -1125,7 +1125,7 @@ static struct bfin_display_config bfin_display_data = {
 #endif
 
 #if IS_ENABLED(CONFIG_VIDEO_ADV7343)
-#include <media/adv7343.h>
+#include <media/i2c/adv7343.h>
 
 static struct v4l2_output adv7343_outputs[] = {
 	{

arch/sh/boards/mach-ap325rxa/setup.c

@@ -27,10 +27,10 @@
 #include <linux/gpio.h>
 #include <linux/videodev2.h>
 #include <linux/sh_intc.h>
-#include <media/ov772x.h>
+#include <media/i2c/ov772x.h>
 #include <media/soc_camera.h>
-#include <media/soc_camera_platform.h>
-#include <media/sh_mobile_ceu.h>
+#include <linux/platform_data/media/soc_camera_platform.h>
+#include <media/drv-intf/sh_mobile_ceu.h>
 #include <video/sh_mobile_lcdc.h>
 #include <asm/io.h>
 #include <asm/clock.h>

arch/sh/boards/mach-ecovec24/setup.c

@@ -38,10 +38,10 @@
 #include <video/sh_mobile_lcdc.h>
 #include <sound/sh_fsi.h>
 #include <sound/simple_card.h>
-#include <media/sh_mobile_ceu.h>
+#include <media/drv-intf/sh_mobile_ceu.h>
 #include <media/soc_camera.h>
-#include <media/tw9910.h>
-#include <media/mt9t112.h>
+#include <media/i2c/tw9910.h>
+#include <media/i2c/mt9t112.h>
 #include <asm/heartbeat.h>
 #include <asm/clock.h>
 #include <asm/suspend.h>
@@ -900,8 +900,8 @@ static struct platform_device irda_device = {
 	.resource       = irda_resources,
 };
 
-#include <media/ak881x.h>
-#include <media/sh_vou.h>
+#include <media/i2c/ak881x.h>
+#include <media/drv-intf/sh_vou.h>
 
 static struct ak881x_pdata ak881x_pdata = {
 	.flags = AK881X_IF_MODE_SLAVE,

arch/sh/boards/mach-kfr2r09/setup.c

@@ -27,9 +27,9 @@
 #include <linux/usb/r8a66597.h>
 #include <linux/videodev2.h>
 #include <linux/sh_intc.h>
-#include <media/rj54n1cb0c.h>
+#include <media/i2c/rj54n1cb0c.h>
 #include <media/soc_camera.h>
-#include <media/sh_mobile_ceu.h>
+#include <media/drv-intf/sh_mobile_ceu.h>
 #include <video/sh_mobile_lcdc.h>
 #include <asm/suspend.h>
 #include <asm/clock.h>

arch/sh/boards/mach-migor/setup.c

@@ -27,10 +27,10 @@
 #include <linux/videodev2.h>
 #include <linux/sh_intc.h>
 #include <video/sh_mobile_lcdc.h>
-#include <media/sh_mobile_ceu.h>
-#include <media/ov772x.h>
+#include <media/drv-intf/sh_mobile_ceu.h>
+#include <media/i2c/ov772x.h>
 #include <media/soc_camera.h>
-#include <media/tw9910.h>
+#include <media/i2c/tw9910.h>
 #include <asm/clock.h>
 #include <asm/machvec.h>
 #include <asm/io.h>

arch/sh/boards/mach-se/7724/setup.c

@@ -30,7 +30,7 @@
 #include <linux/sh_intc.h>
 #include <linux/videodev2.h>
 #include <video/sh_mobile_lcdc.h>
-#include <media/sh_mobile_ceu.h>
+#include <media/drv-intf/sh_mobile_ceu.h>
 #include <sound/sh_fsi.h>
 #include <sound/simple_card.h>
 #include <asm/io.h>
@@ -534,8 +534,8 @@ static struct platform_device irda_device = {
 	.resource       = irda_resources,
 };
 
-#include <media/ak881x.h>
-#include <media/sh_vou.h>
+#include <media/i2c/ak881x.h>
+#include <media/drv-intf/sh_vou.h>
 
 static struct ak881x_pdata ak881x_pdata = {
 	.flags = AK881X_IF_MODE_SLAVE,

drivers/gpu/ipu-v3/ipu-cpmem.c

@@ -161,7 +161,7 @@ static u32 ipu_ch_param_read_field(struct ipuv3_channel *ch, u32 wbs)
  * The DRM pixel formats and IPU internal representation are ordered the other
  * way around, with the first named component ordered at the most significant
  * bits. Further, V4L2 formats are not well defined:
- *     http://linuxtv.org/downloads/v4l-dvb-apis/packed-rgb.html
+ *     https://linuxtv.org/downloads/v4l-dvb-apis/packed-rgb.html
  * We choose the interpretation which matches GStreamer behavior.
  */
 static int v4l2_pix_fmt_to_drm_fourcc(u32 pixelformat)

drivers/input/touchscreen/sur40.c

@@ -444,7 +444,7 @@ static void sur40_process_video(struct sur40_state *sur40)
 		goto err_poll;
 
 	/* mark as finished */
-	v4l2_get_timestamp(&new_buf->vb.timestamp);
+	new_buf->vb.vb2_buf.timestamp = ktime_get_ns();
 	new_buf->vb.sequence = sur40->sequence++;
 	new_buf->vb.field = V4L2_FIELD_NONE;
 	vb2_buffer_done(&new_buf->vb.vb2_buf, VB2_BUF_STATE_DONE);
@@ -644,22 +644,21 @@ static void sur40_disconnect(struct usb_interface *interface)
  * minimum number: many DMA engines need a minimum of 2 buffers in the
  * queue and you need to have another available for userspace processing.
  */
-static int sur40_queue_setup(struct vb2_queue *q, const void *parg,
+static int sur40_queue_setup(struct vb2_queue *q,
 		       unsigned int *nbuffers, unsigned int *nplanes,
 		       unsigned int sizes[], void *alloc_ctxs[])
 {
-	const struct v4l2_format *fmt = parg;
 	struct sur40_state *sur40 = vb2_get_drv_priv(q);
 
 	if (q->num_buffers + *nbuffers < 3)
 		*nbuffers = 3 - q->num_buffers;
+	alloc_ctxs[0] = sur40->alloc_ctx;
 
-	if (fmt && fmt->fmt.pix.sizeimage < sur40_video_format.sizeimage)
-		return -EINVAL;
+	if (*nplanes)
+		return sizes[0] < sur40_video_format.sizeimage ? -EINVAL : 0;
 
 	*nplanes = 1;
-	sizes[0] = fmt ? fmt->fmt.pix.sizeimage : sur40_video_format.sizeimage;
-	alloc_ctxs[0] = sur40->alloc_ctx;
+	sizes[0] = sur40_video_format.sizeimage;
 
 	return 0;
 }

drivers/media/Kconfig

@@ -9,7 +9,7 @@ menuconfig MEDIA_SUPPORT
 	  If you want to use Webcams, Video grabber devices and/or TV devices
 	  enable this option and other options below.
 	  Additional info and docs are available on the web at
-	  <http://linuxtv.org>
+	  <https://linuxtv.org>
 
 if MEDIA_SUPPORT
 
@@ -51,7 +51,7 @@ config MEDIA_RADIO_SUPPORT
 	  Enable AM/FM radio support.
 
 	  Additional info and docs are available on the web at
-	  <http://linuxtv.org>
+	  <https://linuxtv.org>
 
 	  Say Y when you have a board with radio support.
 

drivers/media/common/cx2341x.c

@@ -27,7 +27,7 @@
 #include <linux/videodev2.h>
 
 #include <media/tuner.h>
-#include <media/cx2341x.h>
+#include <media/drv-intf/cx2341x.h>
 #include <media/v4l2-common.h>
 
 MODULE_DESCRIPTION("cx23415/6/8 driver");

drivers/media/common/saa7146/saa7146_core.c

@@ -20,7 +20,7 @@
 
 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
 
-#include <media/saa7146.h>
+#include <media/drv-intf/saa7146.h>
 #include <linux/module.h>
 
 static int saa7146_num;

drivers/media/common/saa7146/saa7146_fops.c

@@ -1,6 +1,6 @@
 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
 
-#include <media/saa7146_vv.h>
+#include <media/drv-intf/saa7146_vv.h>
 #include <linux/module.h>
 
 /****************************************************************************/

drivers/media/common/saa7146/saa7146_hlp.c

@@ -2,7 +2,7 @@
 
 #include <linux/kernel.h>
 #include <linux/export.h>
-#include <media/saa7146_vv.h>
+#include <media/drv-intf/saa7146_vv.h>
 
 static void calculate_output_format_register(struct saa7146_dev* saa, u32 palette, u32* clip_format)
 {

drivers/media/common/saa7146/saa7146_i2c.c

@@ -1,6 +1,6 @@
 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
 
-#include <media/saa7146_vv.h>
+#include <media/drv-intf/saa7146_vv.h>
 
 static u32 saa7146_i2c_func(struct i2c_adapter *adapter)
 {

drivers/media/common/saa7146/saa7146_vbi.c

@@ -1,4 +1,4 @@
-#include <media/saa7146_vv.h>
+#include <media/drv-intf/saa7146_vv.h>
 
 static int vbi_pixel_to_capture = 720 * 2;
 

drivers/media/common/saa7146/saa7146_video.c

@@ -1,6 +1,6 @@
 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
 
-#include <media/saa7146_vv.h>
+#include <media/drv-intf/saa7146_vv.h>
 #include <media/v4l2-event.h>
 #include <media/v4l2-ctrls.h>
 #include <linux/module.h>

drivers/media/common/siano/smsir.h

@@ -30,8 +30,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include <linux/input.h>
 #include <media/rc-core.h>
 
-#define IR_DEFAULT_TIMEOUT		100
-
 struct smscore_device_t;
 
 struct ir_t {

drivers/media/dvb-core/demux.h

@@ -32,6 +32,49 @@
 #include <linux/time.h>
 #include <linux/dvb/dmx.h>
 
+/**
+ * DOC: Digital TV Demux
+ *
+ * The Kernel Digital TV Demux kABI defines a driver-internal interface for
+ * registering low-level, hardware specific driver to a hardware independent
+ * demux layer. It is only of interest for Digital TV device driver writers.
+ * The header file for this kABI is named demux.h and located in
+ * drivers/media/dvb-core.
+ *
+ * The demux kABI should be implemented for each demux in the system. It is
+ * used to select the TS source of a demux and to manage the demux resources.
+ * When the demux client allocates a resource via the demux kABI, it receives
+ * a pointer to the kABI of that resource.
+ *
+ * Each demux receives its TS input from a DVB front-end or from memory, as
+ * set via this demux kABI. In a system with more than one front-end, the kABI
+ * can be used to select one of the DVB front-ends as a TS source for a demux,
+ * unless this is fixed in the HW platform.
+ *
+ * The demux kABI only controls front-ends regarding to their connections with
+ * demuxes; the kABI used to set the other front-end parameters, such as
+ * tuning, are devined via the Digital TV Frontend kABI.
+ *
+ * The functions that implement the abstract interface demux should be defined
+ * static or module private and registered to the Demux core for external
+ * access. It is not necessary to implement every function in the struct
+ * &dmx_demux. For example, a demux interface might support Section filtering,
+ * but not PES filtering. The kABI client is expected to check the value of any
+ * function pointer before calling the function: the value of NULL means
+ * that the function is not available.
+ *
+ * Whenever the functions of the demux API modify shared data, the
+ * possibilities of lost update and race condition problems should be
+ * addressed, e.g. by protecting parts of code with mutexes.
+ *
+ * Note that functions called from a bottom half context must not sleep.
+ * Even a simple memory allocation without using %GFP_ATOMIC can result in a
+ * kernel thread being put to sleep if swapping is needed. For example, the
+ * Linux Kernel calls the functions of a network device interface from a
+ * bottom half context. Thus, if a demux kABI function is called from network
+ * device code, the function must not sleep.
+ */
+
 /*
  * Common definitions
  */
@@ -187,8 +230,28 @@ struct dmx_section_feed {
 	int (*stop_filtering)(struct dmx_section_feed *feed);
 };
 
-/*
- * Callback functions
+/**
+ * DOC: Demux Callback
+ *
+ * This kernel-space API comprises the callback functions that deliver filtered
+ * data to the demux client. Unlike the other DVB kABIs, these functions are
+ * provided by the client and called from the demux code.
+ *
+ * The function pointers of this abstract interface are not packed into a
+ * structure as in the other demux APIs, because the callback functions are
+ * registered and used independent of each other. As an example, it is possible
+ * for the API client to provide several callback functions for receiving TS
+ * packets and no callbacks for PES packets or sections.
+ *
+ * The functions that implement the callback API need not be re-entrant: when
+ * a demux driver calls one of these functions, the driver is not allowed to
+ * call the function again before the original call returns. If a callback is
+ * triggered by a hardware interrupt, it is recommended to use the Linux
+ * bottom half mechanism or start a tasklet instead of making the callback
+ * function call directly from a hardware interrupt.
+ *
+ * This mechanism is implemented by dmx_ts_cb() and dmx_section_cb()
+ * callbacks.
  */
 
 /**

drivers/media/dvb-core/dvb-usb-ids.h

@@ -389,4 +389,5 @@
 #define USB_PID_PCTV_2002E_SE                           0x025d
 #define USB_PID_SVEON_STV27                             0xd3af
 #define USB_PID_TURBOX_DTT_2000                         0xd3a4
+#define USB_PID_WINTV_SOLOHD                            0x0264
 #endif

drivers/media/dvb-core/dvb_frontend.c

@@ -891,21 +891,21 @@ static void dvb_frontend_stop(struct dvb_frontend *fe)
 }
 
 /*
- * Sleep until gettimeofday() > waketime + add_usec
- * This needs to be as precise as possible, but as the delay is
- * usually between 2ms and 32ms, it is done using a scheduled msleep
- * followed by usleep (normally a busy-wait loop) for the remainder
+ * Sleep for the amount of time given by add_usec parameter
+ *
+ * This needs to be as precise as possible, as it affects the detection of
+ * the dish tone command at the satellite subsystem. The precision is improved
+ * by using a scheduled msleep followed by udelay for the remainder.
  */
 void dvb_frontend_sleep_until(ktime_t *waketime, u32 add_usec)
 {
-	s32 delta, newdelta;
+	s32 delta;
 
-	ktime_add_us(*waketime, add_usec);
+	*waketime = ktime_add_us(*waketime, add_usec);
 	delta = ktime_us_delta(ktime_get_real(), *waketime);
 	if (delta > 2500) {
 		msleep((delta - 1500) / 1000);
-		newdelta = ktime_us_delta(ktime_get_real(), *waketime);
-		delta = (newdelta > delta) ? 0 : newdelta;
+		delta = ktime_us_delta(ktime_get_real(), *waketime);
 	}
 	if (delta > 0)
 		udelay(delta);
@@ -2313,9 +2313,9 @@ static int dvb_frontend_ioctl_legacy(struct file *file,
 		dev_dbg(fe->dvb->device, "%s: current delivery system on cache: %d, V3 type: %d\n",
 				 __func__, c->delivery_system, fe->ops.info.type);
 
-		/* Force the CAN_INVERSION_AUTO bit on. If the frontend doesn't
-		 * do it, it is done for it. */
-		info->caps |= FE_CAN_INVERSION_AUTO;
+		/* Set CAN_INVERSION_AUTO bit on in other than oneshot mode */
+		if (!(fepriv->tune_mode_flags & FE_TUNE_MODE_ONESHOT))
+			info->caps |= FE_CAN_INVERSION_AUTO;
 		err = 0;
 		break;
 	}
@@ -2710,6 +2710,11 @@ int dvb_frontend_resume(struct dvb_frontend *fe)
 	else if (fe->ops.tuner_ops.init)
 		ret = fe->ops.tuner_ops.init(fe);
 
+	if (fe->ops.set_tone && fepriv->tone != -1)
+		fe->ops.set_tone(fe, fepriv->tone);
+	if (fe->ops.set_voltage && fepriv->voltage != -1)
+		fe->ops.set_voltage(fe, fepriv->voltage);
+
 	fe->exit = DVB_FE_NO_EXIT;
 	fepriv->state = FESTATE_RETUNE;
 	dvb_frontend_wakeup(fe);

drivers/media/dvb-core/dvb_frontend.h

@@ -42,6 +42,29 @@
 
 #include "dvbdev.h"
 
+/**
+ * DOC: Digital TV Frontend
+ *
+ * The Digital TV Frontend kABI defines a driver-internal interface for
+ * registering low-level, hardware specific driver to a hardware independent
+ * frontend layer. It is only of interest for Digital TV device driver writers.
+ * The header file for this API is named dvb_frontend.h and located in
+ * drivers/media/dvb-core.
+ *
+ * Before using the Digital TV frontend core, the bridge driver should attach
+ * the frontend demod, tuner and SEC devices and call dvb_register_frontend(),
+ * in order to register the new frontend at the subsystem. At device
+ * detach/removal, the bridge driver should call dvb_unregister_frontend() to
+ * remove the frontend from the core and then dvb_frontend_detach() to free the
+ * memory allocated by the frontend drivers.
+ *
+ * The drivers should also call dvb_frontend_suspend() as part of their
+ * handler for the &device_driver.suspend(), and dvb_frontend_resume() as
+ * part of their handler for &device_driver.resume().
+ *
+ * A few other optional functions are provided to handle some special cases.
+ */
+
 /*
  * Maximum number of Delivery systems per frontend. It
  * should be smaller or equal to 32
@@ -112,16 +135,6 @@ struct analog_parameters {
 	u64 std;
 };
 
-enum tuner_param {
-	DVBFE_TUNER_FREQUENCY		= (1 <<  0),
-	DVBFE_TUNER_TUNERSTEP		= (1 <<  1),
-	DVBFE_TUNER_IFFREQ		= (1 <<  2),
-	DVBFE_TUNER_BANDWIDTH		= (1 <<  3),
-	DVBFE_TUNER_REFCLOCK		= (1 <<  4),
-	DVBFE_TUNER_IQSENSE		= (1 <<  5),
-	DVBFE_TUNER_DUMMY		= (1 << 31)
-};
-
 /**
  * enum dvbfe_algo - defines the algorithm used to tune into a channel
  *
@@ -152,15 +165,6 @@ enum dvbfe_algo {
 	DVBFE_ALGO_RECOVERY		= (1 << 31)
 };
 
-struct tuner_state {
-	u32 frequency;
-	u32 tunerstep;
-	u32 ifreq;
-	u32 bandwidth;
-	u32 iqsense;
-	u32 refclock;
-};
-
 /**
  * enum dvbfe_search - search callback possible return status
  *
@@ -209,12 +213,12 @@ enum dvbfe_search {
  *			are stored at @dvb_frontend.dtv_property_cache;. The
  *			tuner demod can change the parameters to reflect the
  *			changes needed for the channel to be tuned, and
- *			update statistics.
+ *			update statistics. This is the recommended way to set
+ *			the tuner parameters and should be used on newer
+ *			drivers.
  * @set_analog_params:	callback function used to tune into an analog TV
  *			channel on hybrid tuners. It passes @analog_parameters;
  *			to the driver.
- * @calc_regs:		callback function used to pass register data settings
- *			for simple tuners.
  * @set_config:		callback function used to send some tuner-specific
  *			parameters.
  * @get_frequency:	get the actual tuned frequency
@@ -227,16 +231,10 @@ enum dvbfe_search {
  *			via DVBv5 API (@dvb_frontend.dtv_property_cache;).
  * @get_afc:		Used only by analog TV core. Reports the frequency
  *			drift due to AFC.
- * @set_frequency:	Set a new frequency. Please notice that using
- *			set_params is preferred.
- * @set_bandwidth:	Set a new frequency. Please notice that using
- *			set_params is preferred.
- * @set_state:		callback function used on some legacy drivers that
- * 			don't implement set_params in order to set properties.
- * 			Shouldn't be used on new drivers.
- * @get_state:		callback function used to get properties by some
- * 			legacy drivers that don't implement set_params.
- * 			Shouldn't be used on new drivers.
+ * @calc_regs:		callback function used to pass register data settings
+ *			for simple tuners.  Shouldn't be used on newer drivers.
+ * @set_frequency:	Set a new frequency. Shouldn't be used on newer drivers.
+ * @set_bandwidth:	Set a new frequency. Shouldn't be used on newer drivers.
  *
  * NOTE: frequencies used on get_frequency and set_frequency are in Hz for
  * terrestrial/cable or kHz for satellite.
@@ -252,14 +250,10 @@ struct dvb_tuner_ops {
 	int (*suspend)(struct dvb_frontend *fe);
 	int (*resume)(struct dvb_frontend *fe);
 
-	/** This is for simple PLLs - set all parameters in one go. */
+	/* This is the recomended way to set the tuner */
 	int (*set_params)(struct dvb_frontend *fe);
 	int (*set_analog_params)(struct dvb_frontend *fe, struct analog_parameters *p);
 
-	/** This is support for demods like the mt352 - fills out the supplied buffer with what to write. */
-	int (*calc_regs)(struct dvb_frontend *fe, u8 *buf, int buf_len);
-
-	/** This is to allow setting tuner-specific configs */
 	int (*set_config)(struct dvb_frontend *fe, void *priv_cfg);
 
 	int (*get_frequency)(struct dvb_frontend *fe, u32 *frequency);
@@ -272,17 +266,23 @@ struct dvb_tuner_ops {
 	int (*get_rf_strength)(struct dvb_frontend *fe, u16 *strength);
 	int (*get_afc)(struct dvb_frontend *fe, s32 *afc);
 
-	/** These are provided separately from set_params in order to facilitate silicon
-	 * tuners which require sophisticated tuning loops, controlling each parameter separately. */
-	int (*set_frequency)(struct dvb_frontend *fe, u32 frequency);
-	int (*set_bandwidth)(struct dvb_frontend *fe, u32 bandwidth);
+	/*
+	 * This is support for demods like the mt352 - fills out the supplied
+	 * buffer with what to write.
+	 *
+	 * Don't use on newer drivers.
+	 */
+	int (*calc_regs)(struct dvb_frontend *fe, u8 *buf, int buf_len);
 
 	/*
-	 * These are provided separately from set_params in order to facilitate silicon
-	 * tuners which require sophisticated tuning loops, controlling each parameter separately.
+	 * These are provided separately from set_params in order to
+	 * facilitate silicon tuners which require sophisticated tuning loops,
+	 * controlling each parameter separately.
+	 *
+	 * Don't use on newer drivers.
 	 */
-	int (*set_state)(struct dvb_frontend *fe, enum tuner_param param, struct tuner_state *state);
-	int (*get_state)(struct dvb_frontend *fe, enum tuner_param param, struct tuner_state *state);
+	int (*set_frequency)(struct dvb_frontend *fe, u32 frequency);
+	int (*set_bandwidth)(struct dvb_frontend *fe, u32 bandwidth);
 };
 
 /**
@@ -404,6 +404,11 @@ struct dtv_frontend_properties;
  *			FE_ENABLE_HIGH_LNB_VOLTAGE ioctl (only Satellite).
  * @dishnetwork_send_legacy_command: callback function to implement the
  *			FE_DISHNETWORK_SEND_LEGACY_CMD ioctl (only Satellite).
+ *			Drivers should not use this, except when the DVB
+ *			core emulation fails to provide proper support (e.g.
+ *			if set_voltage() takes more than 8ms to work), and
+ *			when backward compatibility with this legacy API is
+ *			required.
  * @i2c_gate_ctrl:	controls the I2C gate. Newer drivers should use I2C
  *			mux support instead.
  * @ts_bus_ctrl:	callback function used to take control of the TS bus.
@@ -466,7 +471,8 @@ struct dvb_frontend_ops {
 	int (*ts_bus_ctrl)(struct dvb_frontend* fe, int acquire);
 	int (*set_lna)(struct dvb_frontend *);
 
-	/* These callbacks are for devices that implement their own
+	/*
+	 * These callbacks are for devices that implement their own
 	 * tuning algorithms, rather than a simple swzigzag
 	 */
 	enum dvbfe_search (*search)(struct dvb_frontend *fe);
@@ -682,17 +688,126 @@ struct dvb_frontend {
 	unsigned int exit;
 };
 
-extern int dvb_register_frontend(struct dvb_adapter *dvb,
+/**
+ * dvb_register_frontend() - Registers a DVB frontend at the adapter
+ *
+ * @dvb: pointer to the dvb adapter
+ * @fe: pointer to the frontend struct
+ *
+ * Allocate and initialize the private data needed by the frontend core to
+ * manage the frontend and calls dvb_register_device() to register a new
+ * frontend. It also cleans the property cache that stores the frontend
+ * parameters and selects the first available delivery system.
+ */
+int dvb_register_frontend(struct dvb_adapter *dvb,
 				 struct dvb_frontend *fe);
 
-extern int dvb_unregister_frontend(struct dvb_frontend *fe);
+/**
+ * dvb_unregister_frontend() - Unregisters a DVB frontend
+ *
+ * @fe: pointer to the frontend struct
+ *
+ * Stops the frontend kthread, calls dvb_unregister_device() and frees the
+ * private frontend data allocated by dvb_register_frontend().
+ *
+ * NOTE: This function doesn't frees the memory allocated by the demod,
+ * by the SEC driver and by the tuner. In order to free it, an explicit call to
+ * dvb_frontend_detach() is needed, after calling this function.
+ */
+int dvb_unregister_frontend(struct dvb_frontend *fe);
 
-extern void dvb_frontend_detach(struct dvb_frontend *fe);
+/**
+ * dvb_frontend_detach() - Detaches and frees frontend specific data
+ *
+ * @fe: pointer to the frontend struct
+ *
+ * This function should be called after dvb_unregister_frontend(). It
+ * calls the SEC, tuner and demod release functions:
+ * &dvb_frontend_ops.release_sec, &dvb_frontend_ops.tuner_ops.release,
+ * &dvb_frontend_ops.analog_ops.release and &dvb_frontend_ops.release.
+ *
+ * If the driver is compiled with CONFIG_MEDIA_ATTACH, it also decreases
+ * the module reference count, needed to allow userspace to remove the
+ * previously used DVB frontend modules.
+ */
+void dvb_frontend_detach(struct dvb_frontend *fe);
+
+/**
+ * dvb_frontend_suspend() - Suspends a Digital TV frontend
+ *
+ * @fe: pointer to the frontend struct
+ *
+ * This function prepares a Digital TV frontend to suspend.
+ *
+ * In order to prepare the tuner to suspend, if
+ * &dvb_frontend_ops.tuner_ops.suspend() is available, it calls it. Otherwise,
+ * it will call &dvb_frontend_ops.tuner_ops.sleep(), if available.
+ *
+ * It will also call &dvb_frontend_ops.sleep() to put the demod to suspend.
+ *
+ * The drivers should also call dvb_frontend_suspend() as part of their
+ * handler for the &device_driver.suspend().
+ */
+int dvb_frontend_suspend(struct dvb_frontend *fe);
+
+/**
+ * dvb_frontend_resume() - Resumes a Digital TV frontend
+ *
+ * @fe: pointer to the frontend struct
+ *
+ * This function resumes the usual operation of the tuner after resume.
+ *
+ * In order to resume the frontend, it calls the demod &dvb_frontend_ops.init().
+ *
+ * If &dvb_frontend_ops.tuner_ops.resume() is available, It, it calls it.
+ * Otherwise,t will call &dvb_frontend_ops.tuner_ops.init(), if available.
+ *
+ * Once tuner and demods are resumed, it will enforce that the SEC voltage and
+ * tone are restored to their previous values and wake up the frontend's
+ * kthread in order to retune the frontend.
+ *
+ * The drivers should also call dvb_frontend_resume() as part of their
+ * handler for the &device_driver.resume().
+ */
+int dvb_frontend_resume(struct dvb_frontend *fe);
 
-extern void dvb_frontend_reinitialise(struct dvb_frontend *fe);
-extern int dvb_frontend_suspend(struct dvb_frontend *fe);
-extern int dvb_frontend_resume(struct dvb_frontend *fe);
+/**
+ * dvb_frontend_reinitialise() - forces a reinitialisation at the frontend
+ *
+ * @fe: pointer to the frontend struct
+ *
+ * Calls &dvb_frontend_ops.init() and &dvb_frontend_ops.tuner_ops.init(),
+ * and resets SEC tone and voltage (for Satellite systems).
+ *
+ * NOTE: Currently, this function is used only by one driver (budget-av).
+ * It seems to be due to address some special issue with that specific
+ * frontend.
+ */
+void dvb_frontend_reinitialise(struct dvb_frontend *fe);
 
-extern void dvb_frontend_sleep_until(ktime_t *waketime, u32 add_usec);
+/**
+ * dvb_frontend_sleep_until() - Sleep for the amount of time given by
+ *                      add_usec parameter
+ *
+ * @waketime: pointer to a struct ktime_t
+ * @add_usec: time to sleep, in microseconds
+ *
+ * This function is used to measure the time required for the
+ * %FE_DISHNETWORK_SEND_LEGACY_CMD ioctl to work. It needs to be as precise
+ * as possible, as it affects the detection of the dish tone command at the
+ * satellite subsystem.
+ *
+ * Its used internally by the DVB frontend core, in order to emulate
+ * %FE_DISHNETWORK_SEND_LEGACY_CMD using the &dvb_frontend_ops.set_voltage()
+ * callback.
+ *
+ * NOTE: it should not be used at the drivers, as the emulation for the
+ * legacy callback is provided by the Kernel. The only situation where this
+ * should be at the drivers is when there are some bugs at the hardware that
+ * would prevent the core emulation to work. On such cases, the driver would
+ * be writing a &dvb_frontend_ops.dishnetwork_send_legacy_command() and
+ * calling this function directly.
+ */
+void dvb_frontend_sleep_until(ktime_t *waketime, u32 add_usec);
 
 #endif

drivers/media/dvb-frontends/Kconfig

@@ -264,7 +264,7 @@ config DVB_MB86A16
 config DVB_TDA10071
 	tristate "NXP TDA10071"
 	depends on DVB_CORE && I2C
-	select REGMAP
+	select REGMAP_I2C
 	default m if !MEDIA_SUBDRV_AUTOSELECT
 	help
 	  Say Y when you want to support this frontend.

drivers/media/dvb-frontends/au8522_common.c

@@ -44,7 +44,7 @@ int au8522_writereg(struct au8522_state *state, u16 reg, u8 data)
 	int ret;
 	u8 buf[] = { (reg >> 8) | 0x80, reg & 0xff, data };
 
-	struct i2c_msg msg = { .addr = state->config->demod_address,
+	struct i2c_msg msg = { .addr = state->config.demod_address,
 			       .flags = 0, .buf = buf, .len = 3 };
 
 	ret = i2c_transfer(state->i2c, &msg, 1);
@@ -64,9 +64,9 @@ u8 au8522_readreg(struct au8522_state *state, u16 reg)
 	u8 b1[] = { 0 };
 
 	struct i2c_msg msg[] = {
-		{ .addr = state->config->demod_address, .flags = 0,
+		{ .addr = state->config.demod_address, .flags = 0,
 		  .buf = b0, .len = 2 },
-		{ .addr = state->config->demod_address, .flags = I2C_M_RD,
+		{ .addr = state->config.demod_address, .flags = I2C_M_RD,
 		  .buf = b1, .len = 1 } };
 
 	ret = i2c_transfer(state->i2c, msg, 2);
@@ -140,7 +140,7 @@ EXPORT_SYMBOL(au8522_release_state);
 
 static int au8522_led_gpio_enable(struct au8522_state *state, int onoff)
 {
-	struct au8522_led_config *led_config = state->config->led_cfg;
+	struct au8522_led_config *led_config = state->config.led_cfg;
 	u8 val;
 
 	/* bail out if we can't control an LED */
@@ -170,7 +170,7 @@ static int au8522_led_gpio_enable(struct au8522_state *state, int onoff)
  */
 int au8522_led_ctrl(struct au8522_state *state, int led)
 {
-	struct au8522_led_config *led_config = state->config->led_cfg;
+	struct au8522_led_config *led_config = state->config.led_cfg;
 	int i, ret = 0;
 
 	/* bail out if we can't control an LED */

drivers/media/dvb-frontends/au8522_decoder.c

@@ -730,7 +730,6 @@ static int au8522_probe(struct i2c_client *client,
 	struct v4l2_ctrl_handler *hdl;
 	struct v4l2_subdev *sd;
 	int instance;
-	struct au8522_config *demod_config;
 
 	/* Check if the adapter supports the needed features */
 	if (!i2c_check_functionality(client->adapter,
@@ -754,15 +753,7 @@ static int au8522_probe(struct i2c_client *client,
 		break;
 	}
 
-	demod_config = kzalloc(sizeof(struct au8522_config), GFP_KERNEL);
-	if (demod_config == NULL) {
-		if (instance == 1)
-			kfree(state);
-		return -ENOMEM;
-	}
-	demod_config->demod_address = 0x8e >> 1;
-
-	state->config = demod_config;
+	state->config.demod_address = 0x8e >> 1;
 	state->i2c = client->adapter;
 
 	sd = &state->sd;
@@ -784,8 +775,7 @@ static int au8522_probe(struct i2c_client *client,
 		int err = hdl->error;
 
 		v4l2_ctrl_handler_free(hdl);
-		kfree(demod_config);
-		kfree(state);
+		au8522_release_state(state);
 		return err;
 	}
 

drivers/media/dvb-frontends/au8522_dig.c

@@ -566,7 +566,7 @@ static int au8522_enable_modulation(struct dvb_frontend *fe,
 			au8522_writereg(state,
 				VSB_mod_tab[i].reg,
 				VSB_mod_tab[i].data);
-		au8522_set_if(fe, state->config->vsb_if);
+		au8522_set_if(fe, state->config.vsb_if);
 		break;
 	case QAM_64:
 		dprintk("%s() QAM 64\n", __func__);
@@ -574,7 +574,7 @@ static int au8522_enable_modulation(struct dvb_frontend *fe,
 			au8522_writereg(state,
 				QAM64_mod_tab[i].reg,
 				QAM64_mod_tab[i].data);
-		au8522_set_if(fe, state->config->qam_if);
+		au8522_set_if(fe, state->config.qam_if);
 		break;
 	case QAM_256:
 		if (zv_mode) {
@@ -583,7 +583,7 @@ static int au8522_enable_modulation(struct dvb_frontend *fe,
 				au8522_writereg(state,
 					QAM256_mod_tab_zv_mode[i].reg,
 					QAM256_mod_tab_zv_mode[i].data);
-			au8522_set_if(fe, state->config->qam_if);
+			au8522_set_if(fe, state->config.qam_if);
 			msleep(100);
 			au8522_writereg(state, 0x821a, 0x00);
 		} else {
@@ -592,7 +592,7 @@ static int au8522_enable_modulation(struct dvb_frontend *fe,
 				au8522_writereg(state,
 					QAM256_mod_tab[i].reg,
 					QAM256_mod_tab[i].data);
-			au8522_set_if(fe, state->config->qam_if);
+			au8522_set_if(fe, state->config.qam_if);
 		}
 		break;
 	default:
@@ -666,7 +666,7 @@ static int au8522_read_status(struct dvb_frontend *fe, enum fe_status *status)
 			*status |= FE_HAS_LOCK | FE_HAS_SYNC;
 	}
 
-	switch (state->config->status_mode) {
+	switch (state->config.status_mode) {
 	case AU8522_DEMODLOCKING:
 		dprintk("%s() DEMODLOCKING\n", __func__);
 		if (*status & FE_HAS_VITERBI)
@@ -704,7 +704,7 @@ static int au8522_read_status(struct dvb_frontend *fe, enum fe_status *status)
 
 static int au8522_led_status(struct au8522_state *state, const u16 *snr)
 {
-	struct au8522_led_config *led_config = state->config->led_cfg;
+	struct au8522_led_config *led_config = state->config.led_cfg;
 	int led;
 	u16 strong;
 
@@ -758,7 +758,7 @@ static int au8522_read_snr(struct dvb_frontend *fe, u16 *snr)
 					    au8522_readreg(state, 0x4311),
 					    snr);
 
-	if (state->config->led_cfg)
+	if (state->config.led_cfg)
 		au8522_led_status(state, snr);
 
 	return ret;
@@ -866,7 +866,7 @@ struct dvb_frontend *au8522_attach(const struct au8522_config *config,
 	}
 
 	/* setup the state */
-	state->config = config;
+	state->config = *config;
 	state->i2c = i2c;
 	state->operational_mode = AU8522_DIGITAL_MODE;
 

drivers/media/dvb-frontends/au8522_priv.h

@@ -50,7 +50,7 @@ struct au8522_state {
 	struct list_head hybrid_tuner_instance_list;
 
 	/* configuration settings */
-	const struct au8522_config *config;
+	struct au8522_config config;
 
 	struct dvb_frontend frontend;
 

drivers/media/dvb-frontends/bsbe1-d01a.h

@@ -21,7 +21,7 @@
  * Or, point your browser to http://www.gnu.org/copyleft/gpl.html
  *
  *
- * the project's page is at http://www.linuxtv.org
+ * the project's page is at https://linuxtv.org
  */
 
 #ifndef BSBE1_D01A_H

drivers/media/dvb-frontends/bsbe1.h

@@ -19,7 +19,7 @@
  * Or, point your browser to http://www.gnu.org/copyleft/gpl.html
  *
  *
- * the project's page is at http://www.linuxtv.org
+ * the project's page is at https://linuxtv.org
  */
 
 #ifndef BSBE1_H

drivers/media/dvb-frontends/bsru6.h

@@ -19,7 +19,7 @@
  * Or, point your browser to http://www.gnu.org/copyleft/gpl.html
  *
  *
- * the project's page is at http://www.linuxtv.org
+ * the project's page is at https://linuxtv.org
  */
 
 #ifndef BSRU6_H

drivers/media/dvb-frontends/isl6405.c

@@ -22,7 +22,7 @@
  * Or, point your browser to http://www.gnu.org/copyleft/gpl.html
  *
  *
- * the project's page is at http://www.linuxtv.org
+ * the project's page is at https://linuxtv.org
  */
 #include <linux/delay.h>
 #include <linux/errno.h>

drivers/media/dvb-frontends/isl6405.h

@@ -22,7 +22,7 @@
  * Or, point your browser to http://www.gnu.org/copyleft/gpl.html
  *
  *
- * the project's page is at http://www.linuxtv.org
+ * the project's page is at https://linuxtv.org
  */
 
 #ifndef _ISL6405_H

drivers/media/dvb-frontends/isl6421.c

@@ -22,7 +22,7 @@
  * Or, point your browser to http://www.gnu.org/copyleft/gpl.html
  *
  *
- * the project's page is at http://www.linuxtv.org
+ * the project's page is at https://linuxtv.org
  */
 #include <linux/delay.h>
 #include <linux/errno.h>

drivers/media/dvb-frontends/isl6421.h

@@ -22,7 +22,7 @@
  * Or, point your browser to http://www.gnu.org/copyleft/gpl.html
  *
  *
- * the project's page is at http://www.linuxtv.org
+ * the project's page is at https://linuxtv.org
  */
 
 #ifndef _ISL6421_H

drivers/media/dvb-frontends/lnbp21.c

@@ -22,7 +22,7 @@
  * Or, point your browser to http://www.gnu.org/copyleft/gpl.html
  *
  *
- * the project's page is at http://www.linuxtv.org
+ * the project's page is at https://linuxtv.org
  */
 #include <linux/delay.h>
 #include <linux/errno.h>

drivers/media/dvb-frontends/lnbp21.h

@@ -21,7 +21,7 @@
  * Or, point your browser to http://www.gnu.org/copyleft/gpl.html
  *
  *
- * the project's page is at http://www.linuxtv.org
+ * the project's page is at https://linuxtv.org
  */
 
 #ifndef _LNBP21_H

drivers/media/dvb-frontends/lnbp22.c

@@ -22,7 +22,7 @@
  * Or, point your browser to http://www.gnu.org/copyleft/gpl.html
  *
  *
- * the project's page is at http://www.linuxtv.org
+ * the project's page is at https://linuxtv.org
  */
 #include <linux/delay.h>
 #include <linux/errno.h>

drivers/media/dvb-frontends/lnbp22.h

@@ -22,7 +22,7 @@
  * Or, point your browser to http://www.gnu.org/copyleft/gpl.html
  *
  *
- * the project's page is at http://www.linuxtv.org
+ * the project's page is at https://linuxtv.org
  */
 
 #ifndef _LNBP22_H

drivers/media/dvb-frontends/rtl2832.c

@@ -976,7 +976,8 @@ static int rtl2832_regmap_read(void *context, const void *reg_buf,
 
 	ret = __i2c_transfer(client->adapter, msg, 2);
 	if (ret != 2) {
-		dev_warn(&client->dev, "i2c reg read failed %d\n", ret);
+		dev_warn(&client->dev, "i2c reg read failed %d reg %02x\n",
+			 ret, *(u8 *)reg_buf);
 		if (ret >= 0)
 			ret = -EREMOTEIO;
 		return ret;
@@ -999,7 +1000,8 @@ static int rtl2832_regmap_write(void *context, const void *data, size_t count)
 
 	ret = __i2c_transfer(client->adapter, msg, 1);
 	if (ret != 1) {
-		dev_warn(&client->dev, "i2c reg write failed %d\n", ret);
+		dev_warn(&client->dev, "i2c reg write failed %d reg %02x\n",
+			 ret, *(u8 *)data);
 		if (ret >= 0)
 			ret = -EREMOTEIO;
 		return ret;
@@ -1028,7 +1030,8 @@ static int rtl2832_regmap_gather_write(void *context, const void *reg,
 
 	ret = __i2c_transfer(client->adapter, msg, 1);
 	if (ret != 1) {
-		dev_warn(&client->dev, "i2c reg write failed %d\n", ret);
+		dev_warn(&client->dev, "i2c reg write failed %d reg %02x\n",
+			 ret, *(u8 const *)reg);
 		if (ret >= 0)
 			ret = -EREMOTEIO;
 		return ret;
@@ -1097,18 +1100,6 @@ static int rtl2832_enable_slave_ts(struct i2c_client *client)
 	if (ret)
 		goto err;
 
-	ret = rtl2832_bulk_write(client, 0x022, "\x01", 1);
-	if (ret)
-		goto err;
-
-	ret = rtl2832_bulk_write(client, 0x026, "\x1f", 1);
-	if (ret)
-		goto err;
-
-	ret = rtl2832_bulk_write(client, 0x027, "\xff", 1);
-	if (ret)
-		goto err;
-
 	ret = rtl2832_bulk_write(client, 0x192, "\x7f\xf7\xff", 3);
 	if (ret)
 		goto err;

drivers/media/dvb-frontends/rtl2832_sdr.c

@@ -310,7 +310,7 @@ static void rtl2832_sdr_urb_complete(struct urb *urb)
 		len = rtl2832_sdr_convert_stream(dev, ptr, urb->transfer_buffer,
 				urb->actual_length);
 		vb2_set_plane_payload(&fbuf->vb.vb2_buf, 0, len);
-		v4l2_get_timestamp(&fbuf->vb.timestamp);
+		fbuf->vb.vb2_buf.timestamp = ktime_get_ns();
 		fbuf->vb.sequence = dev->sequence++;
 		vb2_buffer_done(&fbuf->vb.vb2_buf, VB2_BUF_STATE_DONE);
 	}
@@ -490,7 +490,7 @@ static int rtl2832_sdr_querycap(struct file *file, void *fh,
 
 /* Videobuf2 operations */
 static int rtl2832_sdr_queue_setup(struct vb2_queue *vq,
-		const void *parg, unsigned int *nbuffers,
+		unsigned int *nbuffers,
 		unsigned int *nplanes, unsigned int sizes[], void *alloc_ctxs[])
 {
 	struct rtl2832_sdr_dev *dev = vb2_get_drv_priv(vq);

drivers/media/dvb-frontends/si2165.c

@@ -1,21 +1,21 @@
 /*
-    Driver for Silicon Labs Si2161 DVB-T and Si2165 DVB-C/-T Demodulator
-
-    Copyright (C) 2013-2014 Matthias Schwarzott <zzam@gentoo.org>
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    References:
-    http://www.silabs.com/Support%20Documents/TechnicalDocs/Si2165-short.pdf
-*/
+ *  Driver for Silicon Labs Si2161 DVB-T and Si2165 DVB-C/-T Demodulator
+ *
+ *  Copyright (C) 2013-2014 Matthias Schwarzott <zzam@gentoo.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  References:
+ *  http://www.silabs.com/Support%20Documents/TechnicalDocs/Si2165-short.pdf
+ */
 
 #include <linux/delay.h>
 #include <linux/errno.h>
@@ -31,16 +31,18 @@
 #include "si2165_priv.h"
 #include "si2165.h"
 
-/* Hauppauge WinTV-HVR-930C-HD B130 / PCTV QuatroStick 521e 1113xx
- * uses 16 MHz xtal */
-
-/* Hauppauge WinTV-HVR-930C-HD B131 / PCTV QuatroStick 522e 1114xx
- * uses 24 MHz clock provided by tuner */
+/*
+ * Hauppauge WinTV-HVR-930C-HD B130 / PCTV QuatroStick 521e 1113xx
+ * uses 16 MHz xtal
+ *
+ * Hauppauge WinTV-HVR-930C-HD B131 / PCTV QuatroStick 522e 1114xx
+ * uses 24 MHz clock provided by tuner
+ */
 
 struct si2165_state {
 	struct i2c_adapter *i2c;
 
-	struct dvb_frontend frontend;
+	struct dvb_frontend fe;
 
 	struct si2165_config config;
 
@@ -241,6 +243,27 @@ err:
 	return ret;
 }
 
+#define REG16(reg, val) { (reg), (val) & 0xff }, { (reg)+1, (val)>>8 & 0xff }
+struct si2165_reg_value_pair {
+	u16 reg;
+	u8 val;
+};
+
+static int si2165_write_reg_list(struct si2165_state *state,
+				 const struct si2165_reg_value_pair *regs,
+				 int count)
+{
+	int i;
+	int ret;
+
+	for (i = 0; i < count; i++) {
+		ret = si2165_writereg8(state, regs[i].reg, regs[i].val);
+		if (ret < 0)
+			return ret;
+	}
+	return 0;
+}
+
 static int si2165_get_tune_settings(struct dvb_frontend *fe,
 				    struct dvb_frontend_tune_settings *s)
 {
@@ -258,8 +281,10 @@ static int si2165_init_pll(struct si2165_state *state)
 	u8 divl = 12;
 	u8 buf[4];
 
-	/* hardcoded values can be deleted if calculation is verified
-	 * or it yields the same values as the windows driver */
+	/*
+	 * hardcoded values can be deleted if calculation is verified
+	 * or it yields the same values as the windows driver
+	 */
 	switch (ref_freq_Hz) {
 	case 16000000u:
 		divn = 56;
@@ -274,8 +299,10 @@ static int si2165_init_pll(struct si2165_state *state)
 		if (ref_freq_Hz > 16000000u)
 			divr = 2;
 
-		/* now select divn and divp such that
-		 * fvco is in 1624..1824 MHz */
+		/*
+		 * now select divn and divp such that
+		 * fvco is in 1624..1824 MHz
+		 */
 		if (1624000000u * divr > ref_freq_Hz * 2u * 63u)
 			divp = 4;
 
@@ -341,10 +368,12 @@ static int si2165_upload_firmware_block(struct si2165_state *state,
 	if (len % 4 != 0)
 		return -EINVAL;
 
-	deb_fw_load("si2165_upload_firmware_block called with len=0x%x offset=0x%x blockcount=0x%x\n",
+	deb_fw_load(
+		"si2165_upload_firmware_block called with len=0x%x offset=0x%x blockcount=0x%x\n",
 				len, offset, block_count);
 	while (offset+12 <= len && cur_block < block_count) {
-		deb_fw_load("si2165_upload_firmware_block in while len=0x%x offset=0x%x cur_block=0x%x blockcount=0x%x\n",
+		deb_fw_load(
+			"si2165_upload_firmware_block in while len=0x%x offset=0x%x cur_block=0x%x blockcount=0x%x\n",
 					len, offset, cur_block, block_count);
 		wordcount = data[offset];
 		if (wordcount < 1 || data[offset+1] ||
@@ -383,7 +412,8 @@ static int si2165_upload_firmware_block(struct si2165_state *state,
 		cur_block++;
 	}
 
-	deb_fw_load("si2165_upload_firmware_block after while len=0x%x offset=0x%x cur_block=0x%x blockcount=0x%x\n",
+	deb_fw_load(
+		"si2165_upload_firmware_block after while len=0x%x offset=0x%x cur_block=0x%x blockcount=0x%x\n",
 				len, offset, cur_block, block_count);
 
 	if (poffset)
@@ -633,7 +663,7 @@ static int si2165_init(struct dvb_frontend *fe)
 		goto error;
 
 	/* ber_pkt */
-	ret = si2165_writereg16(state, 0x0470 , 0x7530);
+	ret = si2165_writereg16(state, 0x0470, 0x7530);
 	if (ret < 0)
 		goto error;
 
@@ -660,22 +690,19 @@ static int si2165_init(struct dvb_frontend *fe)
 			goto error;
 	}
 
-	/* write adc values after each reset*/
-	ret = si2165_writereg8(state, 0x012a, 0x46);
-	if (ret < 0)
-		goto error;
-	ret = si2165_writereg8(state, 0x012c, 0x00);
+	/* ts output config */
+	ret = si2165_writereg8(state, 0x04e4, 0x20);
 	if (ret < 0)
-		goto error;
-	ret = si2165_writereg8(state, 0x012e, 0x0a);
+		return ret;
+	ret = si2165_writereg16(state, 0x04ef, 0x00fe);
 	if (ret < 0)
-		goto error;
-	ret = si2165_writereg8(state, 0x012f, 0xff);
+		return ret;
+	ret = si2165_writereg24(state, 0x04f4, 0x555555);
 	if (ret < 0)
-		goto error;
-	ret = si2165_writereg8(state, 0x0123, 0x70);
+		return ret;
+	ret = si2165_writereg8(state, 0x04e5, 0x01);
 	if (ret < 0)
-		goto error;
+		return ret;
 
 	return 0;
 error:
@@ -733,16 +760,26 @@ static int si2165_set_oversamp(struct si2165_state *state, u32 dvb_rate)
 	do_div(oversamp, dvb_rate);
 	reg_value = oversamp & 0x3fffffff;
 
-	/* oversamp, usbdump contained 0x03100000; */
+	dprintk("%s: Write oversamp=%#x\n", __func__, reg_value);
 	return si2165_writereg32(state, 0x00e4, reg_value);
 }
 
-static int si2165_set_if_freq_shift(struct si2165_state *state, u32 IF)
+static int si2165_set_if_freq_shift(struct si2165_state *state)
 {
+	struct dvb_frontend *fe = &state->fe;
 	u64 if_freq_shift;
 	s32 reg_value = 0;
 	u32 fe_clk = si2165_get_fe_clk(state);
+	u32 IF = 0;
 
+	if (!fe->ops.tuner_ops.get_if_frequency) {
+		dev_err(&state->i2c->dev,
+			"%s: Error: get_if_frequency() not defined at tuner. Can't work without it!\n",
+			KBUILD_MODNAME);
+		return -EINVAL;
+	}
+
+	fe->ops.tuner_ops.get_if_frequency(fe, &IF);
 	if_freq_shift = IF;
 	if_freq_shift <<= 29;
 
@@ -758,25 +795,39 @@ static int si2165_set_if_freq_shift(struct si2165_state *state, u32 IF)
 	return si2165_writereg32(state, 0x00e8, reg_value);
 }
 
-static int si2165_set_parameters(struct dvb_frontend *fe)
+static const struct si2165_reg_value_pair dvbt_regs[] = {
+	/* standard = DVB-T */
+	{ 0x00ec, 0x01 },
+	{ 0x08f8, 0x00 },
+	/* impulsive_noise_remover */
+	{ 0x031c, 0x01 },
+	{ 0x00cb, 0x00 },
+	/* agc2 */
+	{ 0x016e, 0x41 },
+	{ 0x016c, 0x0e },
+	{ 0x016d, 0x10 },
+	/* agc */
+	{ 0x015b, 0x03 },
+	{ 0x0150, 0x78 },
+	/* agc */
+	{ 0x01a0, 0x78 },
+	{ 0x01c8, 0x68 },
+	/* freq_sync_range */
+	REG16(0x030c, 0x0064),
+	/* gp_reg0 */
+	{ 0x0387, 0x00 }
+};
+
+static int si2165_set_frontend_dvbt(struct dvb_frontend *fe)
 {
 	int ret;
 	struct dtv_frontend_properties *p = &fe->dtv_property_cache;
 	struct si2165_state *state = fe->demodulator_priv;
-	u8 val[3];
-	u32 IF;
 	u32 dvb_rate = 0;
 	u16 bw10k;
 
 	dprintk("%s: called\n", __func__);
 
-	if (!fe->ops.tuner_ops.get_if_frequency) {
-		dev_err(&state->i2c->dev,
-			"%s: Error: get_if_frequency() not defined at tuner. Can't work without it!\n",
-			KBUILD_MODNAME);
-		return -EINVAL;
-	}
-
 	if (!state->has_dvbt)
 		return -EINVAL;
 
@@ -788,34 +839,10 @@ static int si2165_set_parameters(struct dvb_frontend *fe)
 		bw10k = 800;
 	}
 
-	/* standard = DVB-T */
-	ret = si2165_writereg8(state, 0x00ec, 0x01);
-	if (ret < 0)
-		return ret;
 	ret = si2165_adjust_pll_divl(state, 12);
 	if (ret < 0)
 		return ret;
 
-	fe->ops.tuner_ops.get_if_frequency(fe, &IF);
-	ret = si2165_set_if_freq_shift(state, IF);
-	if (ret < 0)
-		return ret;
-	ret = si2165_writereg8(state, 0x08f8, 0x00);
-	if (ret < 0)
-		return ret;
-	/* ts output config */
-	ret = si2165_writereg8(state, 0x04e4, 0x20);
-	if (ret < 0)
-		return ret;
-	ret = si2165_writereg16(state, 0x04ef, 0x00fe);
-	if (ret < 0)
-		return ret;
-	ret = si2165_writereg24(state, 0x04f4, 0x555555);
-	if (ret < 0)
-		return ret;
-	ret = si2165_writereg8(state, 0x04e5, 0x01);
-	if (ret < 0)
-		return ret;
 	/* bandwidth in 10KHz steps */
 	ret = si2165_writereg16(state, 0x0308, bw10k);
 	if (ret < 0)
@@ -823,48 +850,115 @@ static int si2165_set_parameters(struct dvb_frontend *fe)
 	ret = si2165_set_oversamp(state, dvb_rate);
 	if (ret < 0)
 		return ret;
-	/* impulsive_noise_remover */
-	ret = si2165_writereg8(state, 0x031c, 0x01);
-	if (ret < 0)
-		return ret;
-	ret = si2165_writereg8(state, 0x00cb, 0x00);
+
+	ret = si2165_write_reg_list(state, dvbt_regs, ARRAY_SIZE(dvbt_regs));
 	if (ret < 0)
 		return ret;
+
+	return 0;
+}
+
+static const struct si2165_reg_value_pair dvbc_regs[] = {
+	/* standard = DVB-C */
+	{ 0x00ec, 0x05 },
+	{ 0x08f8, 0x00 },
+
 	/* agc2 */
-	ret = si2165_writereg8(state, 0x016e, 0x41);
-	if (ret < 0)
-		return ret;
-	ret = si2165_writereg8(state, 0x016c, 0x0e);
-	if (ret < 0)
-		return ret;
-	ret = si2165_writereg8(state, 0x016d, 0x10);
-	if (ret < 0)
-		return ret;
+	{ 0x016e, 0x50 },
+	{ 0x016c, 0x0e },
+	{ 0x016d, 0x10 },
 	/* agc */
-	ret = si2165_writereg8(state, 0x015b, 0x03);
-	if (ret < 0)
-		return ret;
-	ret = si2165_writereg8(state, 0x0150, 0x78);
-	if (ret < 0)
-		return ret;
+	{ 0x015b, 0x03 },
+	{ 0x0150, 0x68 },
 	/* agc */
-	ret = si2165_writereg8(state, 0x01a0, 0x78);
+	{ 0x01a0, 0x68 },
+	{ 0x01c8, 0x50 },
+
+	{ 0x0278, 0x0d },
+
+	{ 0x023a, 0x05 },
+	{ 0x0261, 0x09 },
+	REG16(0x0350, 0x3e80),
+	{ 0x02f4, 0x00 },
+
+	{ 0x00cb, 0x01 },
+	REG16(0x024c, 0x0000),
+	REG16(0x027c, 0x0000),
+	{ 0x0232, 0x03 },
+	{ 0x02f4, 0x0b },
+	{ 0x018b, 0x00 },
+};
+
+static int si2165_set_frontend_dvbc(struct dvb_frontend *fe)
+{
+	struct si2165_state *state = fe->demodulator_priv;
+	int ret;
+	struct dtv_frontend_properties *p = &fe->dtv_property_cache;
+	const u32 dvb_rate = p->symbol_rate;
+	const u32 bw_hz = p->bandwidth_hz;
+
+	if (!state->has_dvbc)
+		return -EINVAL;
+
+	if (dvb_rate == 0)
+		return -EINVAL;
+
+	ret = si2165_adjust_pll_divl(state, 14);
 	if (ret < 0)
 		return ret;
-	ret = si2165_writereg8(state, 0x01c8, 0x68);
+
+	/* Oversampling */
+	ret = si2165_set_oversamp(state, dvb_rate);
 	if (ret < 0)
 		return ret;
-	/* freq_sync_range */
-	ret = si2165_writereg16(state, 0x030c, 0x0064);
+
+	ret = si2165_writereg32(state, 0x00c4, bw_hz);
 	if (ret < 0)
 		return ret;
-	/* gp_reg0 */
-	ret = si2165_readreg8(state, 0x0387, val);
+
+	ret = si2165_write_reg_list(state, dvbc_regs, ARRAY_SIZE(dvbc_regs));
 	if (ret < 0)
 		return ret;
-	ret = si2165_writereg8(state, 0x0387, 0x00);
+
+	return 0;
+}
+
+static const struct si2165_reg_value_pair agc_rewrite[] = {
+	{ 0x012a, 0x46 },
+	{ 0x012c, 0x00 },
+	{ 0x012e, 0x0a },
+	{ 0x012f, 0xff },
+	{ 0x0123, 0x70 }
+};
+
+static int si2165_set_frontend(struct dvb_frontend *fe)
+{
+	struct si2165_state *state = fe->demodulator_priv;
+	struct dtv_frontend_properties *p = &fe->dtv_property_cache;
+	u32 delsys = p->delivery_system;
+	int ret;
+	u8 val[3];
+
+	/* initial setting of if freq shift */
+	ret = si2165_set_if_freq_shift(state);
 	if (ret < 0)
 		return ret;
+
+	switch (delsys) {
+	case SYS_DVBT:
+		ret = si2165_set_frontend_dvbt(fe);
+		if (ret < 0)
+			return ret;
+		break;
+	case SYS_DVBC_ANNEX_A:
+		ret = si2165_set_frontend_dvbc(fe);
+		if (ret < 0)
+			return ret;
+		break;
+	default:
+		return -EINVAL;
+	}
+
 	/* dsp_addr_jump */
 	ret = si2165_writereg32(state, 0x0348, 0xf4000000);
 	if (ret < 0)
@@ -874,8 +968,7 @@ static int si2165_set_parameters(struct dvb_frontend *fe)
 		fe->ops.tuner_ops.set_params(fe);
 
 	/* recalc if_freq_shift if IF might has changed */
-	fe->ops.tuner_ops.get_if_frequency(fe, &IF);
-	ret = si2165_set_if_freq_shift(state, IF);
+	ret = si2165_set_if_freq_shift(state);
 	if (ret < 0)
 		return ret;
 
@@ -886,6 +979,7 @@ static int si2165_set_parameters(struct dvb_frontend *fe)
 	ret = si2165_writereg8(state, 0x0341, 0x00);
 	if (ret < 0)
 		return ret;
+
 	/* reset all */
 	ret = si2165_writereg8(state, 0x00c0, 0x00);
 	if (ret < 0)
@@ -894,6 +988,13 @@ static int si2165_set_parameters(struct dvb_frontend *fe)
 	ret = si2165_writereg32(state, 0x0384, 0x00000000);
 	if (ret < 0)
 		return ret;
+
+	/* write adc values after each reset*/
+	ret = si2165_write_reg_list(state, agc_rewrite,
+				    ARRAY_SIZE(agc_rewrite));
+	if (ret < 0)
+		return ret;
+
 	/* start_synchro */
 	ret = si2165_writereg8(state, 0x02e0, 0x01);
 	if (ret < 0)
@@ -917,7 +1018,12 @@ static void si2165_release(struct dvb_frontend *fe)
 static struct dvb_frontend_ops si2165_ops = {
 	.info = {
 		.name = "Silicon Labs ",
-		.caps =	FE_CAN_FEC_1_2 |
+		 /* For DVB-C */
+		.symbol_rate_min = 1000000,
+		.symbol_rate_max = 7200000,
+		/* For DVB-T */
+		.frequency_stepsize = 166667,
+		.caps = FE_CAN_FEC_1_2 |
 			FE_CAN_FEC_2_3 |
 			FE_CAN_FEC_3_4 |
 			FE_CAN_FEC_5_6 |
@@ -930,7 +1036,6 @@ static struct dvb_frontend_ops si2165_ops = {
 			FE_CAN_QAM_128 |
 			FE_CAN_QAM_256 |
 			FE_CAN_QAM_AUTO |
-			FE_CAN_TRANSMISSION_MODE_AUTO |
 			FE_CAN_GUARD_INTERVAL_AUTO |
 			FE_CAN_HIERARCHY_AUTO |
 			FE_CAN_MUTE_TS |
@@ -943,7 +1048,7 @@ static struct dvb_frontend_ops si2165_ops = {
 	.init = si2165_init,
 	.sleep = si2165_sleep,
 
-	.set_frontend      = si2165_set_parameters,
+	.set_frontend      = si2165_set_frontend,
 	.read_status       = si2165_read_status,
 
 	.release = si2165_release,
@@ -979,9 +1084,9 @@ struct dvb_frontend *si2165_attach(const struct si2165_config *config,
 	}
 
 	/* create dvb_frontend */
-	memcpy(&state->frontend.ops, &si2165_ops,
+	memcpy(&state->fe.ops, &si2165_ops,
 		sizeof(struct dvb_frontend_ops));
-	state->frontend.demodulator_priv = state;
+	state->fe.demodulator_priv = state;
 
 	/* powerup */
 	io_ret = si2165_writereg8(state, 0x0000, state->config.chip_mode);
@@ -1033,20 +1138,22 @@ struct dvb_frontend *si2165_attach(const struct si2165_config *config,
 		KBUILD_MODNAME, chip_name, rev_char, state->chip_type,
 		state->chip_revcode);
 
-	strlcat(state->frontend.ops.info.name, chip_name,
-			sizeof(state->frontend.ops.info.name));
+	strlcat(state->fe.ops.info.name, chip_name,
+			sizeof(state->fe.ops.info.name));
 
 	n = 0;
 	if (state->has_dvbt) {
-		state->frontend.ops.delsys[n++] = SYS_DVBT;
-		strlcat(state->frontend.ops.info.name, " DVB-T",
-			sizeof(state->frontend.ops.info.name));
+		state->fe.ops.delsys[n++] = SYS_DVBT;
+		strlcat(state->fe.ops.info.name, " DVB-T",
+			sizeof(state->fe.ops.info.name));
+	}
+	if (state->has_dvbc) {
+		state->fe.ops.delsys[n++] = SYS_DVBC_ANNEX_A;
+		strlcat(state->fe.ops.info.name, " DVB-C",
+			sizeof(state->fe.ops.info.name));
 	}
-	if (state->has_dvbc)
-		dev_warn(&state->i2c->dev, "%s: DVB-C is not yet supported.\n",
-		       KBUILD_MODNAME);
 
-	return &state->frontend;
+	return &state->fe;
 
 error:
 	kfree(state);

drivers/media/dvb-frontends/stb6100.c

@@ -252,6 +252,7 @@ static int stb6100_get_bandwidth(struct dvb_frontend *fe, u32 *bandwidth)
 {
 	int rc;
 	u8 f;
+	u32 bw;
 	struct stb6100_state *state = fe->tuner_priv;
 
 	rc = stb6100_read_reg(state, STB6100_F);
@@ -259,9 +260,9 @@ static int stb6100_get_bandwidth(struct dvb_frontend *fe, u32 *bandwidth)
 		return rc;
 	f = rc & STB6100_F_F;
 
-	state->status.bandwidth = (f + 5) * 2000;	/* x2 for ZIF	*/
+	bw = (f + 5) * 2000;	/* x2 for ZIF	*/
 
-	*bandwidth = state->bandwidth = state->status.bandwidth * 1000;
+	*bandwidth = state->bandwidth = bw * 1000;
 	dprintk(verbose, FE_DEBUG, 1, "bandwidth = %u Hz", state->bandwidth);
 	return 0;
 }
@@ -495,68 +496,28 @@ static int stb6100_sleep(struct dvb_frontend *fe)
 static int stb6100_init(struct dvb_frontend *fe)
 {
 	struct stb6100_state *state = fe->tuner_priv;
-	struct tuner_state *status = &state->status;
+	int refclk = 27000000; /* Hz */
 
-	status->tunerstep	= 125000;
-	status->ifreq		= 0;
-	status->refclock	= 27000000;	/* Hz	*/
-	status->iqsense		= 1;
-	status->bandwidth	= 36000;	/* kHz	*/
-	state->bandwidth	= status->bandwidth * 1000;	/* Hz	*/
-	state->reference	= status->refclock / 1000;	/* kHz	*/
+	/*
+	 * iqsense = 1
+	 * tunerstep = 125000
+	 */
+	state->bandwidth        = 36000000;		/* Hz	*/
+	state->reference	= refclk / 1000;	/* kHz	*/
 
 	/* Set default bandwidth. Modified, PN 13-May-10	*/
 	return 0;
 }
 
-static int stb6100_get_state(struct dvb_frontend *fe,
-			     enum tuner_param param,
-			     struct tuner_state *state)
+static int stb6100_set_params(struct dvb_frontend *fe)
 {
-	switch (param) {
-	case DVBFE_TUNER_FREQUENCY:
-		stb6100_get_frequency(fe, &state->frequency);
-		break;
-	case DVBFE_TUNER_TUNERSTEP:
-		break;
-	case DVBFE_TUNER_IFFREQ:
-		break;
-	case DVBFE_TUNER_BANDWIDTH:
-		stb6100_get_bandwidth(fe, &state->bandwidth);
-		break;
-	case DVBFE_TUNER_REFCLOCK:
-		break;
-	default:
-		break;
-	}
+	struct dtv_frontend_properties *c = &fe->dtv_property_cache;
 
-	return 0;
-}
+	if (c->frequency > 0)
+		stb6100_set_frequency(fe, c->frequency);
 
-static int stb6100_set_state(struct dvb_frontend *fe,
-			     enum tuner_param param,
-			     struct tuner_state *state)
-{
-	struct stb6100_state *tstate = fe->tuner_priv;
-
-	switch (param) {
-	case DVBFE_TUNER_FREQUENCY:
-		stb6100_set_frequency(fe, state->frequency);
-		tstate->frequency = state->frequency;
-		break;
-	case DVBFE_TUNER_TUNERSTEP:
-		break;
-	case DVBFE_TUNER_IFFREQ:
-		break;
-	case DVBFE_TUNER_BANDWIDTH:
-		stb6100_set_bandwidth(fe, state->bandwidth);
-		tstate->bandwidth = state->bandwidth;
-		break;
-	case DVBFE_TUNER_REFCLOCK:
-		break;
-	default:
-		break;
-	}
+	if (c->bandwidth_hz > 0)
+		stb6100_set_bandwidth(fe, c->bandwidth_hz);
 
 	return 0;
 }
@@ -572,8 +533,9 @@ static struct dvb_tuner_ops stb6100_ops = {
 	.init		= stb6100_init,
 	.sleep          = stb6100_sleep,
 	.get_status	= stb6100_get_status,
-	.get_state	= stb6100_get_state,
-	.set_state	= stb6100_set_state,
+	.set_params	= stb6100_set_params,
+	.get_frequency  = stb6100_get_frequency,
+	.get_bandwidth  = stb6100_get_bandwidth,
 	.release	= stb6100_release
 };
 

drivers/media/dvb-frontends/stb6100.h

@@ -86,7 +86,6 @@ struct stb6100_state {
 	const struct stb6100_config	*config;
 	struct dvb_tuner_ops		ops;
 	struct dvb_frontend		*frontend;
-	struct tuner_state		status;
 
 	u32 frequency;
 	u32 srate;

drivers/media/dvb-frontends/stb6100_cfg.h

@@ -19,20 +19,21 @@
 	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
 */
 
+#include <linux/dvb/frontend.h>
+#include "dvb_frontend.h"
+
 static int stb6100_get_frequency(struct dvb_frontend *fe, u32 *frequency)
 {
 	struct dvb_frontend_ops	*frontend_ops = &fe->ops;
 	struct dvb_tuner_ops	*tuner_ops = &frontend_ops->tuner_ops;
-	struct tuner_state	t_state;
 	int err = 0;
 
-	if (tuner_ops->get_state) {
-		err = tuner_ops->get_state(fe, DVBFE_TUNER_FREQUENCY, &t_state);
+	if (tuner_ops->get_frequency) {
+		err = tuner_ops->get_frequency(fe, frequency);
 		if (err < 0) {
 			printk("%s: Invalid parameter\n", __func__);
 			return err;
 		}
-		*frequency = t_state.frequency;
 	}
 	return 0;
 }
@@ -41,13 +42,16 @@ static int stb6100_set_frequency(struct dvb_frontend *fe, u32 frequency)
 {
 	struct dvb_frontend_ops	*frontend_ops = &fe->ops;
 	struct dvb_tuner_ops	*tuner_ops = &frontend_ops->tuner_ops;
-	struct tuner_state	t_state;
+	struct dtv_frontend_properties *c = &fe->dtv_property_cache;
+	u32 bw = c->bandwidth_hz;
 	int err = 0;
 
-	t_state.frequency = frequency;
+	c->frequency = frequency;
+	c->bandwidth_hz = 0;		/* Don't adjust the bandwidth */
 
-	if (tuner_ops->set_state) {
-		err = tuner_ops->set_state(fe, DVBFE_TUNER_FREQUENCY, &t_state);
+	if (tuner_ops->set_params) {
+		err = tuner_ops->set_params(fe);
+		c->bandwidth_hz = bw;
 		if (err < 0) {
 			printk("%s: Invalid parameter\n", __func__);
 			return err;
@@ -60,16 +64,14 @@ static int stb6100_get_bandwidth(struct dvb_frontend *fe, u32 *bandwidth)
 {
 	struct dvb_frontend_ops	*frontend_ops = &fe->ops;
 	struct dvb_tuner_ops	*tuner_ops = &frontend_ops->tuner_ops;
-	struct tuner_state	t_state;
 	int err = 0;
 
-	if (tuner_ops->get_state) {
-		err = tuner_ops->get_state(fe, DVBFE_TUNER_BANDWIDTH, &t_state);
+	if (tuner_ops->get_bandwidth) {
+		err = tuner_ops->get_bandwidth(fe, bandwidth);
 		if (err < 0) {
 			printk("%s: Invalid parameter\n", __func__);
 			return err;
 		}
-		*bandwidth = t_state.bandwidth;
 	}
 	return 0;
 }
@@ -78,13 +80,16 @@ static int stb6100_set_bandwidth(struct dvb_frontend *fe, u32 bandwidth)
 {
 	struct dvb_frontend_ops	*frontend_ops = &fe->ops;
 	struct dvb_tuner_ops	*tuner_ops = &frontend_ops->tuner_ops;
-	struct tuner_state	t_state;
+	struct dtv_frontend_properties *c = &fe->dtv_property_cache;
+	u32 freq = c->frequency;
 	int err = 0;
 
-	t_state.bandwidth = bandwidth;
+	c->bandwidth_hz = bandwidth;
+	c->frequency = 0;		/* Don't adjust the frequency */
 
-	if (tuner_ops->set_state) {
-		err = tuner_ops->set_state(fe, DVBFE_TUNER_BANDWIDTH, &t_state);
+	if (tuner_ops->set_params) {
+		err = tuner_ops->set_params(fe);
+		c->frequency = freq;
 		if (err < 0) {
 			printk("%s: Invalid parameter\n", __func__);
 			return err;

drivers/media/dvb-frontends/stb6100_proc.h

@@ -17,27 +17,27 @@
 	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
 */
 
+#include <linux/dvb/frontend.h>
+#include "dvb_frontend.h"
+
 static int stb6100_get_freq(struct dvb_frontend *fe, u32 *frequency)
 {
 	struct dvb_frontend_ops	*frontend_ops = &fe->ops;
 	struct dvb_tuner_ops	*tuner_ops = &frontend_ops->tuner_ops;
-	struct tuner_state	state;
 	int err = 0;
 
-	if (tuner_ops->get_state) {
+	if (tuner_ops->get_frequency) {
 		if (frontend_ops->i2c_gate_ctrl)
 			frontend_ops->i2c_gate_ctrl(fe, 1);
 
-		err = tuner_ops->get_state(fe, DVBFE_TUNER_FREQUENCY, &state);
+		err = tuner_ops->get_frequency(fe, frequency);
 		if (err < 0) {
-			printk(KERN_ERR "%s: Invalid parameter\n", __func__);
+			printk("%s: Invalid parameter\n", __func__);
 			return err;
 		}
 
 		if (frontend_ops->i2c_gate_ctrl)
 			frontend_ops->i2c_gate_ctrl(fe, 0);
-
-		*frequency = state.frequency;
 	}
 
 	return 0;
@@ -47,18 +47,21 @@ static int stb6100_set_freq(struct dvb_frontend *fe, u32 frequency)
 {
 	struct dvb_frontend_ops	*frontend_ops = &fe->ops;
 	struct dvb_tuner_ops	*tuner_ops = &frontend_ops->tuner_ops;
-	struct tuner_state	state;
+	struct dtv_frontend_properties *c = &fe->dtv_property_cache;
+	u32 bw = c->bandwidth_hz;
 	int err = 0;
 
-	state.frequency = frequency;
+	c->frequency = frequency;
+	c->bandwidth_hz = 0;		/* Don't adjust the bandwidth */
 
-	if (tuner_ops->set_state) {
+	if (tuner_ops->set_params) {
 		if (frontend_ops->i2c_gate_ctrl)
 			frontend_ops->i2c_gate_ctrl(fe, 1);
 
-		err = tuner_ops->set_state(fe, DVBFE_TUNER_FREQUENCY, &state);
+		err = tuner_ops->set_params(fe);
+		c->bandwidth_hz = bw;
 		if (err < 0) {
-			printk(KERN_ERR "%s: Invalid parameter\n", __func__);
+			printk("%s: Invalid parameter\n", __func__);
 			return err;
 		}
 
@@ -74,14 +77,13 @@ static int stb6100_get_bandw(struct dvb_frontend *fe, u32 *bandwidth)
 {
 	struct dvb_frontend_ops	*frontend_ops = &fe->ops;
 	struct dvb_tuner_ops	*tuner_ops = &frontend_ops->tuner_ops;
-	struct tuner_state	state;
 	int err = 0;
 
-	if (tuner_ops->get_state) {
+	if (tuner_ops->get_bandwidth) {
 		if (frontend_ops->i2c_gate_ctrl)
 			frontend_ops->i2c_gate_ctrl(fe, 1);
 
-		err = tuner_ops->get_state(fe, DVBFE_TUNER_BANDWIDTH, &state);
+		err = tuner_ops->get_bandwidth(fe, bandwidth);
 		if (err < 0) {
 			printk(KERN_ERR "%s: Invalid parameter\n", __func__);
 			return err;
@@ -89,8 +91,6 @@ static int stb6100_get_bandw(struct dvb_frontend *fe, u32 *bandwidth)
 
 		if (frontend_ops->i2c_gate_ctrl)
 			frontend_ops->i2c_gate_ctrl(fe, 0);
-
-		*bandwidth = state.bandwidth;
 	}
 
 	return 0;
@@ -100,16 +100,19 @@ static int stb6100_set_bandw(struct dvb_frontend *fe, u32 bandwidth)
 {
 	struct dvb_frontend_ops	*frontend_ops = &fe->ops;
 	struct dvb_tuner_ops	*tuner_ops = &frontend_ops->tuner_ops;
-	struct tuner_state	state;
+	struct dtv_frontend_properties *c = &fe->dtv_property_cache;
+	u32 freq = c->frequency;
 	int err = 0;
 
-	state.bandwidth = bandwidth;
+	c->bandwidth_hz = bandwidth;
+	c->frequency = 0;		/* Don't adjust the frequency */
 
-	if (tuner_ops->set_state) {
+	if (tuner_ops->set_params) {
 		if (frontend_ops->i2c_gate_ctrl)
 			frontend_ops->i2c_gate_ctrl(fe, 1);
 
-		err = tuner_ops->set_state(fe, DVBFE_TUNER_BANDWIDTH, &state);
+		err = tuner_ops->set_params(fe);
+		c->frequency = freq;
 		if (err < 0) {
 			printk(KERN_ERR "%s: Invalid parameter\n", __func__);
 			return err;

drivers/media/dvb-frontends/tda665x.c

@@ -66,26 +66,13 @@ exit:
 	return err;
 }
 
-static int tda665x_get_state(struct dvb_frontend *fe,
-			     enum tuner_param param,
-			     struct tuner_state *tstate)
+static int tda665x_get_frequency(struct dvb_frontend *fe, u32 *frequency)
 {
 	struct tda665x_state *state = fe->tuner_priv;
-	int err = 0;
 
-	switch (param) {
-	case DVBFE_TUNER_FREQUENCY:
-		tstate->frequency = state->frequency;
-		break;
-	case DVBFE_TUNER_BANDWIDTH:
-		break;
-	default:
-		printk(KERN_ERR "%s: Unknown parameter (param=%d)\n", __func__, param);
-		err = -EINVAL;
-		break;
-	}
+	*frequency = state->frequency;
 
-	return err;
+	return 0;
 }
 
 static int tda665x_get_status(struct dvb_frontend *fe, u32 *status)
@@ -111,9 +98,8 @@ exit:
 	return err;
 }
 
-static int tda665x_set_state(struct dvb_frontend *fe,
-			     enum tuner_param param,
-			     struct tuner_state *tstate)
+static int tda665x_set_frequency(struct dvb_frontend *fe,
+				 u32 new_frequency)
 {
 	struct tda665x_state *state = fe->tuner_priv;
 	const struct tda665x_config *config = state->config;
@@ -121,88 +107,96 @@ static int tda665x_set_state(struct dvb_frontend *fe,
 	u8 buf[4];
 	int err = 0;
 
-	if (param & DVBFE_TUNER_FREQUENCY) {
-
-		frequency = tstate->frequency;
-		if ((frequency < config->frequency_max) || (frequency > config->frequency_min)) {
-			printk(KERN_ERR "%s: Frequency beyond limits, frequency=%d\n", __func__, frequency);
-			return -EINVAL;
-		}
-
-		frequency += config->frequency_offst;
-		frequency *= config->ref_multiplier;
-		frequency += config->ref_divider >> 1;
-		frequency /= config->ref_divider;
-
-		buf[0] = (u8) ((frequency & 0x7f00) >> 8);
-		buf[1] = (u8) (frequency & 0x00ff) >> 0;
-		buf[2] = 0x80 | 0x40 | 0x02;
-		buf[3] = 0x00;
-
-		/* restore frequency */
-		frequency = tstate->frequency;
-
-		if (frequency < 153000000) {
-			/* VHF-L */
-			buf[3] |= 0x01; /* fc, Low Band, 47 - 153 MHz */
-			if (frequency < 68000000)
-				buf[3] |= 0x40; /* 83uA */
-			if (frequency < 1040000000)
-				buf[3] |= 0x60; /* 122uA */
-			if (frequency < 1250000000)
-				buf[3] |= 0x80; /* 163uA */
-			else
-				buf[3] |= 0xa0; /* 254uA */
-		} else if (frequency < 438000000) {
-			/* VHF-H */
-			buf[3] |= 0x02; /* fc, Mid Band, 153 - 438 MHz */
-			if (frequency < 230000000)
-				buf[3] |= 0x40;
-			if (frequency < 300000000)
-				buf[3] |= 0x60;
-			else
-				buf[3] |= 0x80;
-		} else {
-			/* UHF */
-			buf[3] |= 0x04; /* fc, High Band, 438 - 862 MHz */
-			if (frequency < 470000000)
-				buf[3] |= 0x60;
-			if (frequency < 526000000)
-				buf[3] |= 0x80;
-			else
-				buf[3] |= 0xa0;
-		}
-
-		/* Set params */
-		err = tda665x_write(state, buf, 5);
-		if (err < 0)
-			goto exit;
-
-		/* sleep for some time */
-		printk(KERN_DEBUG "%s: Waiting to Phase LOCK\n", __func__);
-		msleep(20);
-		/* check status */
-		err = tda665x_get_status(fe, &status);
-		if (err < 0)
-			goto exit;
-
-		if (status == 1) {
-			printk(KERN_DEBUG "%s: Tuner Phase locked: status=%d\n", __func__, status);
-			state->frequency = frequency; /* cache successful state */
-		} else {
-			printk(KERN_ERR "%s: No Phase lock: status=%d\n", __func__, status);
-		}
-	} else {
-		printk(KERN_ERR "%s: Unknown parameter (param=%d)\n", __func__, param);
+	if ((new_frequency < config->frequency_max)
+	    || (new_frequency > config->frequency_min)) {
+		printk(KERN_ERR "%s: Frequency beyond limits, frequency=%d\n",
+		       __func__, new_frequency);
 		return -EINVAL;
 	}
 
+	frequency = new_frequency;
+
+	frequency += config->frequency_offst;
+	frequency *= config->ref_multiplier;
+	frequency += config->ref_divider >> 1;
+	frequency /= config->ref_divider;
+
+	buf[0] = (u8) ((frequency & 0x7f00) >> 8);
+	buf[1] = (u8) (frequency & 0x00ff) >> 0;
+	buf[2] = 0x80 | 0x40 | 0x02;
+	buf[3] = 0x00;
+
+	/* restore frequency */
+	frequency = new_frequency;
+
+	if (frequency < 153000000) {
+		/* VHF-L */
+		buf[3] |= 0x01; /* fc, Low Band, 47 - 153 MHz */
+		if (frequency < 68000000)
+			buf[3] |= 0x40; /* 83uA */
+		if (frequency < 1040000000)
+			buf[3] |= 0x60; /* 122uA */
+		if (frequency < 1250000000)
+			buf[3] |= 0x80; /* 163uA */
+		else
+			buf[3] |= 0xa0; /* 254uA */
+	} else if (frequency < 438000000) {
+		/* VHF-H */
+		buf[3] |= 0x02; /* fc, Mid Band, 153 - 438 MHz */
+		if (frequency < 230000000)
+			buf[3] |= 0x40;
+		if (frequency < 300000000)
+			buf[3] |= 0x60;
+		else
+			buf[3] |= 0x80;
+	} else {
+		/* UHF */
+		buf[3] |= 0x04; /* fc, High Band, 438 - 862 MHz */
+		if (frequency < 470000000)
+			buf[3] |= 0x60;
+		if (frequency < 526000000)
+			buf[3] |= 0x80;
+		else
+			buf[3] |= 0xa0;
+	}
+
+	/* Set params */
+	err = tda665x_write(state, buf, 5);
+	if (err < 0)
+		goto exit;
+
+	/* sleep for some time */
+	printk(KERN_DEBUG "%s: Waiting to Phase LOCK\n", __func__);
+	msleep(20);
+	/* check status */
+	err = tda665x_get_status(fe, &status);
+	if (err < 0)
+		goto exit;
+
+	if (status == 1) {
+		printk(KERN_DEBUG "%s: Tuner Phase locked: status=%d\n",
+		       __func__, status);
+		state->frequency = frequency; /* cache successful state */
+	} else {
+		printk(KERN_ERR "%s: No Phase lock: status=%d\n",
+		       __func__, status);
+	}
+
 	return 0;
 exit:
 	printk(KERN_ERR "%s: I/O Error\n", __func__);
 	return err;
 }
 
+static int tda665x_set_params(struct dvb_frontend *fe)
+{
+	struct dtv_frontend_properties *c = &fe->dtv_property_cache;
+
+	tda665x_set_frequency(fe, c->frequency);
+
+	return 0;
+}
+
 static int tda665x_release(struct dvb_frontend *fe)
 {
 	struct tda665x_state *state = fe->tuner_priv;
@@ -213,10 +207,9 @@ static int tda665x_release(struct dvb_frontend *fe)
 }
 
 static struct dvb_tuner_ops tda665x_ops = {
-
-	.set_state	= tda665x_set_state,
-	.get_state	= tda665x_get_state,
 	.get_status	= tda665x_get_status,
+	.set_params	= tda665x_set_params,
+	.get_frequency	= tda665x_get_frequency,
 	.release	= tda665x_release
 };
 

drivers/media/dvb-frontends/tda8261.c

@@ -83,88 +83,71 @@ static int tda8261_get_status(struct dvb_frontend *fe, u32 *status)
 static const u32 div_tab[] = { 2000, 1000,  500,  250,  125 }; /* kHz */
 static const u8  ref_div[] = { 0x00, 0x01, 0x02, 0x05, 0x07 };
 
-static int tda8261_get_state(struct dvb_frontend *fe,
-			     enum tuner_param param,
-			     struct tuner_state *tstate)
+static int tda8261_get_frequency(struct dvb_frontend *fe, u32 *frequency)
 {
 	struct tda8261_state *state = fe->tuner_priv;
-	int err = 0;
 
-	switch (param) {
-	case DVBFE_TUNER_FREQUENCY:
-		tstate->frequency = state->frequency;
-		break;
-	case DVBFE_TUNER_BANDWIDTH:
-		tstate->bandwidth = 40000000; /* FIXME! need to calculate Bandwidth */
-		break;
-	default:
-		pr_err("%s: Unknown parameter (param=%d)\n", __func__, param);
-		err = -EINVAL;
-		break;
-	}
+	*frequency = state->frequency;
 
-	return err;
+	return 0;
 }
 
-static int tda8261_set_state(struct dvb_frontend *fe,
-			     enum tuner_param param,
-			     struct tuner_state *tstate)
+static int tda8261_set_params(struct dvb_frontend *fe)
 {
+	struct dtv_frontend_properties *c = &fe->dtv_property_cache;
 	struct tda8261_state *state = fe->tuner_priv;
 	const struct tda8261_config *config = state->config;
 	u32 frequency, N, status = 0;
 	u8 buf[4];
 	int err = 0;
 
-	if (param & DVBFE_TUNER_FREQUENCY) {
-		/**
-		 * N = Max VCO Frequency / Channel Spacing
-		 * Max VCO Frequency = VCO frequency + (channel spacing - 1)
-		 * (to account for half channel spacing on either side)
-		 */
-		frequency = tstate->frequency;
-		if ((frequency < 950000) || (frequency > 2150000)) {
-			pr_warn("%s: Frequency beyond limits, frequency=%d\n", __func__, frequency);
-			return -EINVAL;
-		}
-		N = (frequency + (div_tab[config->step_size] - 1)) / div_tab[config->step_size];
-		pr_debug("%s: Step size=%d, Divider=%d, PG=0x%02x (%d)\n",
-			__func__, config->step_size, div_tab[config->step_size], N, N);
-
-		buf[0] = (N >> 8) & 0xff;
-		buf[1] = N & 0xff;
-		buf[2] = (0x01 << 7) | ((ref_div[config->step_size] & 0x07) << 1);
-
-		if (frequency < 1450000)
-			buf[3] = 0x00;
-		else if (frequency < 2000000)
-			buf[3] = 0x40;
-		else if (frequency < 2150000)
-			buf[3] = 0x80;
-
-		/* Set params */
-		if ((err = tda8261_write(state, buf)) < 0) {
-			pr_err("%s: I/O Error\n", __func__);
-			return err;
-		}
-		/* sleep for some time */
-		pr_debug("%s: Waiting to Phase LOCK\n", __func__);
-		msleep(20);
-		/* check status */
-		if ((err = tda8261_get_status(fe, &status)) < 0) {
-			pr_err("%s: I/O Error\n", __func__);
-			return err;
-		}
-		if (status == 1) {
-			pr_debug("%s: Tuner Phase locked: status=%d\n", __func__, status);
-			state->frequency = frequency; /* cache successful state */
-		} else {
-			pr_debug("%s: No Phase lock: status=%d\n", __func__, status);
-		}
-	} else {
-		pr_err("%s: Unknown parameter (param=%d)\n", __func__, param);
+	/*
+	 * N = Max VCO Frequency / Channel Spacing
+	 * Max VCO Frequency = VCO frequency + (channel spacing - 1)
+	 * (to account for half channel spacing on either side)
+	 */
+	frequency = c->frequency;
+	if ((frequency < 950000) || (frequency > 2150000)) {
+		pr_warn("%s: Frequency beyond limits, frequency=%d\n",
+			__func__, frequency);
 		return -EINVAL;
 	}
+	N = (frequency + (div_tab[config->step_size] - 1)) / div_tab[config->step_size];
+	pr_debug("%s: Step size=%d, Divider=%d, PG=0x%02x (%d)\n",
+		__func__, config->step_size, div_tab[config->step_size], N, N);
+
+	buf[0] = (N >> 8) & 0xff;
+	buf[1] = N & 0xff;
+	buf[2] = (0x01 << 7) | ((ref_div[config->step_size] & 0x07) << 1);
+
+	if (frequency < 1450000)
+		buf[3] = 0x00;
+	else if (frequency < 2000000)
+		buf[3] = 0x40;
+	else if (frequency < 2150000)
+		buf[3] = 0x80;
+
+	/* Set params */
+	err = tda8261_write(state, buf);
+	if (err < 0) {
+		pr_err("%s: I/O Error\n", __func__);
+		return err;
+	}
+	/* sleep for some time */
+	pr_debug("%s: Waiting to Phase LOCK\n", __func__);
+	msleep(20);
+	/* check status */
+	if ((err = tda8261_get_status(fe, &status)) < 0) {
+		pr_err("%s: I/O Error\n", __func__);
+		return err;
+	}
+	if (status == 1) {
+		pr_debug("%s: Tuner Phase locked: status=%d\n", __func__,
+			 status);
+		state->frequency = frequency; /* cache successful state */
+	} else {
+		pr_debug("%s: No Phase lock: status=%d\n", __func__, status);
+	}
 
 	return 0;
 }
@@ -182,14 +165,13 @@ static struct dvb_tuner_ops tda8261_ops = {
 
 	.info = {
 		.name		= "TDA8261",
-//		.tuner_name	= NULL,
 		.frequency_min	=  950000,
 		.frequency_max	= 2150000,
 		.frequency_step = 0
 	},
 
-	.set_state	= tda8261_set_state,
-	.get_state	= tda8261_get_state,
+	.set_params	= tda8261_set_params,
+	.get_frequency	= tda8261_get_frequency,
 	.get_status	= tda8261_get_status,
 	.release	= tda8261_release
 };
@@ -210,10 +192,7 @@ struct dvb_frontend *tda8261_attach(struct dvb_frontend *fe,
 	fe->ops.tuner_ops	= tda8261_ops;
 
 	fe->ops.tuner_ops.info.frequency_step = div_tab[config->step_size];
-//	fe->ops.tuner_ops.tuner_name	 = &config->buf;
 
-//	printk("%s: Attaching %s TDA8261 8PSK/QPSK tuner\n",
-//		__func__, fe->ops.tuner_ops.tuner_name);
 	pr_info("%s: Attaching TDA8261 8PSK/QPSK tuner\n", __func__);
 
 	return fe;

drivers/media/dvb-frontends/tda8261_cfg.h

@@ -21,17 +21,15 @@ static int tda8261_get_frequency(struct dvb_frontend *fe, u32 *frequency)
 {
 	struct dvb_frontend_ops	*frontend_ops = &fe->ops;
 	struct dvb_tuner_ops	*tuner_ops = &frontend_ops->tuner_ops;
-	struct tuner_state	t_state;
 	int err = 0;
 
-	if (tuner_ops->get_state) {
-		err = tuner_ops->get_state(fe, DVBFE_TUNER_FREQUENCY, &t_state);
+	if (tuner_ops->get_frequency) {
+		err = tuner_ops->get_frequency(fe, frequency);
 		if (err < 0) {
-			printk("%s: Invalid parameter\n", __func__);
+			pr_err("%s: Invalid parameter\n", __func__);
 			return err;
 		}
-		*frequency = t_state.frequency;
-		printk("%s: Frequency=%d\n", __func__, t_state.frequency);
+		pr_debug("%s: Frequency=%d\n", __func__, *frequency);
 	}
 	return 0;
 }
@@ -40,37 +38,24 @@ static int tda8261_set_frequency(struct dvb_frontend *fe, u32 frequency)
 {
 	struct dvb_frontend_ops	*frontend_ops = &fe->ops;
 	struct dvb_tuner_ops	*tuner_ops = &frontend_ops->tuner_ops;
-	struct tuner_state	t_state;
+	struct dtv_frontend_properties *c = &fe->dtv_property_cache;
 	int err = 0;
 
-	t_state.frequency = frequency;
-
-	if (tuner_ops->set_state) {
-		err = tuner_ops->set_state(fe, DVBFE_TUNER_FREQUENCY, &t_state);
+	if (tuner_ops->set_params) {
+		err = tuner_ops->set_params(fe);
 		if (err < 0) {
-			printk("%s: Invalid parameter\n", __func__);
+			pr_err("%s: Invalid parameter\n", __func__);
 			return err;
 		}
 	}
-	printk("%s: Frequency=%d\n", __func__, t_state.frequency);
+	pr_debug("%s: Frequency=%d\n", __func__, c->frequency);
 	return 0;
 }
 
 static int tda8261_get_bandwidth(struct dvb_frontend *fe, u32 *bandwidth)
 {
-	struct dvb_frontend_ops	*frontend_ops = &fe->ops;
-	struct dvb_tuner_ops	*tuner_ops = &frontend_ops->tuner_ops;
-	struct tuner_state	t_state;
-	int err = 0;
+	/* FIXME! need to calculate Bandwidth */
+	*bandwidth = 40000000;
 
-	if (tuner_ops->get_state) {
-		err = tuner_ops->get_state(fe, DVBFE_TUNER_BANDWIDTH, &t_state);
-		if (err < 0) {
-			printk("%s: Invalid parameter\n", __func__);
-			return err;
-		}
-		*bandwidth = t_state.bandwidth;
-		printk("%s: Bandwidth=%d\n", __func__, t_state.bandwidth);
-	}
 	return 0;
 }

drivers/media/dvb-frontends/tdhd1.h

@@ -20,7 +20,7 @@
  * Or, point your browser to http://www.gnu.org/copyleft/gpl.html
  *
  *
- * The project's page is at http://www.linuxtv.org
+ * The project's page is at https://linuxtv.org
  */
 
 #ifndef TDHD1_H

drivers/media/i2c/Kconfig

@@ -83,6 +83,16 @@ config VIDEO_MSP3400
 	  To compile this driver as a module, choose M here: the
 	  module will be called msp3400.
 
+config VIDEO_CS3308
+	tristate "Cirrus Logic CS3308 audio ADC"
+	depends on VIDEO_V4L2 && I2C
+	---help---
+	  Support for the Cirrus Logic CS3308 High Performance 8-Channel
+	  Analog Volume Control
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called cs3308.
+
 config VIDEO_CS5345
 	tristate "Cirrus Logic CS5345 audio ADC"
 	depends on VIDEO_V4L2 && I2C

drivers/media/i2c/Makefile

@@ -43,6 +43,7 @@ obj-$(CONFIG_VIDEO_TVP7002) += tvp7002.o
 obj-$(CONFIG_VIDEO_TW2804) += tw2804.o
 obj-$(CONFIG_VIDEO_TW9903) += tw9903.o
 obj-$(CONFIG_VIDEO_TW9906) += tw9906.o
+obj-$(CONFIG_VIDEO_CS3308) += cs3308.o
 obj-$(CONFIG_VIDEO_CS5345) += cs5345.o
 obj-$(CONFIG_VIDEO_CS53L32A) += cs53l32a.o
 obj-$(CONFIG_VIDEO_M52790) += m52790.o

drivers/media/i2c/ad9389b.c

@@ -35,7 +35,7 @@
 #include <media/v4l2-common.h>
 #include <media/v4l2-dv-timings.h>
 #include <media/v4l2-ctrls.h>
-#include <media/ad9389b.h>
+#include <media/i2c/ad9389b.h>
 
 static int debug;
 module_param(debug, int, 0644);

drivers/media/i2c/adp1653.c

@@ -37,7 +37,7 @@
 #include <linux/slab.h>
 #include <linux/of.h>
 #include <linux/gpio/consumer.h>
-#include <media/adp1653.h>
+#include <media/i2c/adp1653.h>
 #include <media/v4l2-device.h>
 
 #define TIMEOUT_MAX		820000

drivers/media/i2c/adv7180.c

@@ -1112,7 +1112,7 @@ static int init_device(struct adv7180_state *state)
 	mutex_lock(&state->mutex);
 
 	adv7180_write(state, ADV7180_REG_PWR_MAN, ADV7180_PWR_MAN_RES);
-	usleep_range(2000, 10000);
+	usleep_range(5000, 10000);
 
 	ret = state->chip_info->init(state);
 	if (ret)

drivers/media/i2c/adv7183.c

@@ -27,7 +27,7 @@
 #include <linux/types.h>
 #include <linux/videodev2.h>
 
-#include <media/adv7183.h>
+#include <media/i2c/adv7183.h>
 #include <media/v4l2-ctrls.h>
 #include <media/v4l2-device.h>
 

drivers/media/i2c/adv7343.c

@@ -28,7 +28,7 @@
 #include <linux/of.h>
 #include <linux/of_graph.h>
 
-#include <media/adv7343.h>
+#include <media/i2c/adv7343.h>
 #include <media/v4l2-async.h>
 #include <media/v4l2-device.h>
 #include <media/v4l2-ctrls.h>