ARM: common: edma: clear completion interrupts on stop

When stopping a DMA transfer with interrupts disabled it is possible
that the DMA transfer completes before the events are cleared. In
this case the completion interrupt will be pending, causing a
completion callback after the transfer was stopped.

By clearing the completion interrupt for the stopping channel it is
ensured that no completion event will be generated after the stop.

Signed-off-by: John Ogness <john.ogness@linutronix.de>
Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arch/arm/common/edma.c

@@ -1350,6 +1350,9 @@ void edma_stop(unsigned channel)
 		edma_shadow0_write_array(ctlr, SH_SECR, j, mask);
 		edma_write_array(ctlr, EDMA_EMCR, j, mask);
 
+		/* clear possibly pending completion interrupt */
+		edma_shadow0_write_array(ctlr, SH_ICR, j, mask);
+
 		pr_debug("EDMA: EER%d %08x\n", j,
 				edma_shadow0_read_array(ctlr, SH_EER, j));