Merge tag 'usb-3.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB fixes / quirks from Greg KH:
 "Here are some USB and PHY fixes and quirks for 3.17-rc6.  Nothing
  major, just a few things that have been reported"

* tag 'usb-3.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  USB: storage: Add quirks for Entrega/Xircom USB to SCSI converters
  USB: storage: Add quirk for Ariston Technologies iConnect USB to SCSI adapter
  USB: storage: Add quirk for Adaptec USBConnect 2000 USB-to-SCSI Adapter
  USB: EHCI: unlink QHs even after the controller has stopped
  phy: spear1340-miphy: fix driver dependencies
  phy: spear1310-miphy: fix driver dependencies
  phy: miphy365x: Fix off-by-one error

drivers/phy/Kconfig

@@ -214,12 +214,14 @@ config PHY_QCOM_IPQ806X_SATA
 config PHY_ST_SPEAR1310_MIPHY
 	tristate "ST SPEAR1310-MIPHY driver"
 	select GENERIC_PHY
+	depends on MACH_SPEAR1310 || COMPILE_TEST
 	help
 	  Support for ST SPEAr1310 MIPHY which can be used for PCIe and SATA.
 
 config PHY_ST_SPEAR1340_MIPHY
 	tristate "ST SPEAR1340-MIPHY driver"
 	select GENERIC_PHY
+	depends on MACH_SPEAR1340 || COMPILE_TEST
 	help
 	  Support for ST SPEAr1340 MIPHY which can be used for PCIe and SATA.
 

drivers/phy/phy-miphy365x.c

@@ -163,6 +163,7 @@ enum miphy_sata_gen {
 };
 
 static u8 rx_tx_spd[] = {
+	0, /* GEN0 doesn't exist. */
 	TX_SPDSEL_GEN1_VAL | RX_SPDSEL_GEN1_VAL,
 	TX_SPDSEL_GEN2_VAL | RX_SPDSEL_GEN2_VAL,
 	TX_SPDSEL_GEN3_VAL | RX_SPDSEL_GEN3_VAL

drivers/usb/host/ehci-hcd.c

@@ -965,8 +965,6 @@ rescan:
 	}
 
 	qh->exception = 1;
-	if (ehci->rh_state < EHCI_RH_RUNNING)
-		qh->qh_state = QH_STATE_IDLE;
 	switch (qh->qh_state) {
 	case QH_STATE_LINKED:
 		WARN_ON(!list_empty(&qh->qtd_list));

drivers/usb/storage/unusual_devs.h

@@ -101,6 +101,12 @@ UNUSUAL_DEV(  0x03f0, 0x4002, 0x0001, 0x0001,
 		"PhotoSmart R707",
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_FIX_CAPACITY),
 
+UNUSUAL_DEV(  0x03f3, 0x0001, 0x0000, 0x9999,
+		"Adaptec",
+		"USBConnect 2000",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_euscsi_init,
+		US_FL_SCM_MULT_TARG ),
+
 /* Reported by Sebastian Kapfer <sebastian_kapfer@gmx.net>
  * and Olaf Hering <olh@suse.de> (different bcd's, same vendor/product)
  * for USB floppies that need the SINGLE_LUN enforcement.
@@ -1125,6 +1131,18 @@ UNUSUAL_DEV(  0x0851, 0x1543, 0x0200, 0x0200,
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_NOT_LOCKABLE),
 
+UNUSUAL_DEV(  0x085a, 0x0026, 0x0100, 0x0133,
+		"Xircom",
+		"PortGear USB-SCSI (Mac USB Dock)",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_euscsi_init,
+		US_FL_SCM_MULT_TARG ),
+
+UNUSUAL_DEV(  0x085a, 0x0028, 0x0100, 0x0133,
+		"Xircom",
+		"PortGear USB to SCSI Converter",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_euscsi_init,
+		US_FL_SCM_MULT_TARG ),
+
 /* Submitted by Jan De Luyck <lkml@kcore.org> */
 UNUSUAL_DEV(  0x08bd, 0x1100, 0x0000, 0x0000,
 		"CITIZEN",
@@ -1964,6 +1982,14 @@ UNUSUAL_DEV(  0x152d, 0x2329, 0x0100, 0x0100,
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_IGNORE_RESIDUE | US_FL_SANE_SENSE ),
 
+/* Entrega Technologies U1-SC25 (later Xircom PortGear PGSCSI)
+ * and Mac USB Dock USB-SCSI */
+UNUSUAL_DEV(  0x1645, 0x0007, 0x0100, 0x0133,
+		"Entrega Technologies",
+		"USB to SCSI Converter",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_euscsi_init,
+		US_FL_SCM_MULT_TARG ),
+
 /* Reported by Robert Schedel <r.schedel@yahoo.de>
  * Note: this is a 'super top' device like the above 14cd/6600 device */
 UNUSUAL_DEV(  0x1652, 0x6600, 0x0201, 0x0201,
@@ -1986,6 +2012,12 @@ UNUSUAL_DEV(  0x177f, 0x0400, 0x0000, 0x0000,
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_BULK_IGNORE_TAG | US_FL_MAX_SECTORS_64 ),
 
+UNUSUAL_DEV(  0x1822, 0x0001, 0x0000, 0x9999,
+		"Ariston Technologies",
+		"iConnect USB to SCSI adapter",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_euscsi_init,
+		US_FL_SCM_MULT_TARG ),
+
 /* Reported by Hans de Goede <hdegoede@redhat.com>
  * These Appotech controllers are found in Picture Frames, they provide a
  * (buggy) emulation of a cdrom drive which contains the windows software