Merge remote-tracking branch 'airlied/drm-next' into drm-intel-next-queued

Backmerge drm-next to get at the nonblocking atomic helpers, needed to
merge the i915 conversion.

Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>

Documentation/.gitignore

@@ -0,0 +1 @@
+output

Documentation/DocBook/Makefile

@@ -33,10 +33,6 @@ PDF_METHOD	= $(prefer-db2x)
 PS_METHOD	= $(prefer-db2x)
 
 
-###
-# The targets that may be used.
-PHONY += xmldocs sgmldocs psdocs pdfdocs htmldocs mandocs installmandocs cleandocs
-
 targets += $(DOCBOOKS)
 BOOKS := $(addprefix $(obj)/,$(DOCBOOKS))
 xmldocs: $(BOOKS)
@@ -63,6 +59,9 @@ installmandocs: mandocs
 		sort -k 2 -k 1 | uniq -f 1 | sed -e 's: :/:' | \
 		xargs install -m 644 -t /usr/local/man/man9/
 
+# no-op for the DocBook toolchain
+epubdocs:
+
 ###
 #External programs used
 KERNELDOCXMLREF = $(srctree)/scripts/kernel-doc-xml-ref

Documentation/DocBook/device-drivers.tmpl

@@ -128,16 +128,48 @@ X!Edrivers/base/interface.c
 !Edrivers/base/platform.c
 !Edrivers/base/bus.c
      </sect1>
-     <sect1><title>Device Drivers DMA Management</title>
+     <sect1>
+       <title>Buffer Sharing and Synchronization</title>
+       <para>
+         The dma-buf subsystem provides the framework for sharing buffers
+         for hardware (DMA) access across multiple device drivers and
+         subsystems, and for synchronizing asynchronous hardware access.
+       </para>
+       <para>
+         This is used, for example, by drm "prime" multi-GPU support, but
+         is of course not limited to GPU use cases.
+       </para>
+       <para>
+         The three main components of this are: (1) dma-buf, representing
+         a sg_table and exposed to userspace as a file descriptor to allow
+         passing between devices, (2) fence, which provides a mechanism
+         to signal when one device as finished access, and (3) reservation,
+         which manages the shared or exclusive fence(s) associated with
+         the buffer.
+       </para>
+       <sect2><title>dma-buf</title>
 !Edrivers/dma-buf/dma-buf.c
+!Iinclude/linux/dma-buf.h
+       </sect2>
+       <sect2><title>reservation</title>
+!Pdrivers/dma-buf/reservation.c Reservation Object Overview
+!Edrivers/dma-buf/reservation.c
+!Iinclude/linux/reservation.h
+       </sect2>
+       <sect2><title>fence</title>
 !Edrivers/dma-buf/fence.c
-!Edrivers/dma-buf/seqno-fence.c
 !Iinclude/linux/fence.h
+!Edrivers/dma-buf/seqno-fence.c
 !Iinclude/linux/seqno-fence.h
+!Edrivers/dma-buf/fence-array.c
+!Iinclude/linux/fence-array.h
 !Edrivers/dma-buf/reservation.c
 !Iinclude/linux/reservation.h
 !Edrivers/dma-buf/sync_file.c
 !Iinclude/linux/sync_file.h
+       </sect2>
+     </sect1>
+     <sect1><title>Device Drivers DMA Management</title>
 !Edrivers/base/dma-coherent.c
 !Edrivers/base/dma-mapping.c
      </sect1>

Documentation/DocBook/gpu.tmpl

@@ -1017,6 +1017,11 @@ int max_width, max_height;</synopsis>
 	<function>drm_framebuffer_unregister_private</function>.
       </para>
     </sect2>
+    <sect2>
+      <title>DRM Format Handling</title>
+!Iinclude/drm/drm_fourcc.h
+!Edrivers/gpu/drm/drm_fourcc.c
+    </sect2>
     <sect2>
       <title>Dumb Buffer Objects</title>
       <para>
@@ -1570,7 +1575,7 @@ void intel_crt_init(struct drm_device *dev)
       </sect3>
       <sect3>
 	<title>Implementing Asynchronous Atomic Commit</title>
-!Pdrivers/gpu/drm/drm_atomic_helper.c implementing async commit
+!Pdrivers/gpu/drm/drm_atomic_helper.c implementing nonblocking commit
       </sect3>
       <sect3>
 	<title>Atomic State Reset and Initialization</title>
@@ -1683,6 +1688,12 @@ void intel_crt_init(struct drm_device *dev)
 !Edrivers/gpu/drm/drm_panel.c
 !Pdrivers/gpu/drm/drm_panel.c drm panel
     </sect2>
+    <sect2>
+      <title>Simple KMS Helper Reference</title>
+!Iinclude/drm/drm_simple_kms_helper.h
+!Edrivers/gpu/drm/drm_simple_kms_helper.c
+!Pdrivers/gpu/drm/drm_simple_kms_helper.c overview
+    </sect2>
   </sect1>
 
   <!-- Internals: kms properties -->

Documentation/Makefile.sphinx

@@ -0,0 +1,63 @@
+# -*- makefile -*-
+# Makefile for Sphinx documentation
+#
+
+# You can set these variables from the command line.
+SPHINXBUILD   = sphinx-build
+SPHINXOPTS    =
+PAPER         =
+BUILDDIR      = $(obj)/output
+
+# User-friendly check for sphinx-build
+HAVE_SPHINX := $(shell if which $(SPHINXBUILD) >/dev/null 2>&1; then echo 1; else echo 0; fi)
+
+ifeq ($(HAVE_SPHINX),0)
+
+.DEFAULT:
+	$(warning The '$(SPHINXBUILD)' command was not found. Make sure you have Sphinx installed and in PATH, or set the SPHINXBUILD make variable to point to the full path of the '$(SPHINXBUILD)' executable.)
+	@echo "  SKIP    Sphinx $@ target."
+
+else # HAVE_SPHINX
+
+# User-friendly check for rst2pdf
+HAVE_RST2PDF := $(shell if python -c "import rst2pdf" >/dev/null 2>&1; then echo 1; else echo 0; fi)
+
+# Internal variables.
+PAPEROPT_a4     = -D latex_paper_size=a4
+PAPEROPT_letter = -D latex_paper_size=letter
+KERNELDOC       = $(srctree)/scripts/kernel-doc
+KERNELDOC_CONF  = -D kerneldoc_srctree=$(srctree) -D kerneldoc_bin=$(KERNELDOC)
+ALLSPHINXOPTS   = -D version=$(KERNELVERSION) -D release=$(KERNELRELEASE) -d $(BUILDDIR)/.doctrees $(KERNELDOC_CONF) $(PAPEROPT_$(PAPER)) -c $(srctree)/$(src) $(SPHINXOPTS) $(srctree)/$(src)
+# the i18n builder cannot share the environment and doctrees with the others
+I18NSPHINXOPTS  = $(PAPEROPT_$(PAPER)) $(SPHINXOPTS) .
+
+quiet_cmd_sphinx = SPHINX  $@
+      cmd_sphinx = $(SPHINXBUILD) -b $2 $(ALLSPHINXOPTS) $(BUILDDIR)/$2
+
+htmldocs:
+	$(call cmd,sphinx,html)
+
+pdfdocs:
+ifeq ($(HAVE_RST2PDF),0)
+	$(warning The Python 'rst2pdf' module was not found. Make sure you have the module installed to produce PDF output.)
+	@echo "  SKIP    Sphinx $@ target."
+else # HAVE_RST2PDF
+	$(call cmd,sphinx,pdf)
+endif # HAVE_RST2PDF
+
+epubdocs:
+	$(call cmd,sphinx,epub)
+
+xmldocs:
+	$(call cmd,sphinx,xml)
+
+# no-ops for the Sphinx toolchain
+sgmldocs:
+psdocs:
+mandocs:
+installmandocs:
+
+cleandocs:
+	$(Q)rm -rf $(BUILDDIR)
+
+endif # HAVE_SPHINX

Documentation/arm64/silicon-errata.txt

@@ -56,6 +56,7 @@ stable kernels.
 | ARM            | MMU-500         | #841119,#826419 | N/A                     |
 |                |                 |                 |                         |
 | Cavium         | ThunderX ITS    | #22375, #24313  | CAVIUM_ERRATUM_22375    |
+| Cavium         | ThunderX ITS    | #23144          | CAVIUM_ERRATUM_23144    |
 | Cavium         | ThunderX GICv3  | #23154          | CAVIUM_ERRATUM_23154    |
 | Cavium         | ThunderX Core   | #27456          | CAVIUM_ERRATUM_27456    |
 | Cavium         | ThunderX SMMUv2 | #27704          | N/A		       |

Documentation/conf.py

@@ -0,0 +1,414 @@
+# -*- coding: utf-8 -*-
+#
+# The Linux Kernel documentation build configuration file, created by
+# sphinx-quickstart on Fri Feb 12 13:51:46 2016.
+#
+# This file is execfile()d with the current directory set to its
+# containing dir.
+#
+# Note that not all possible configuration values are present in this
+# autogenerated file.
+#
+# All configuration values have a default; values that are commented out
+# serve to show the default.
+
+import sys
+import os
+
+# If extensions (or modules to document with autodoc) are in another directory,
+# add these directories to sys.path here. If the directory is relative to the
+# documentation root, use os.path.abspath to make it absolute, like shown here.
+sys.path.insert(0, os.path.abspath('sphinx'))
+
+# -- General configuration ------------------------------------------------
+
+# If your documentation needs a minimal Sphinx version, state it here.
+#needs_sphinx = '1.0'
+
+# Add any Sphinx extension module names here, as strings. They can be
+# extensions coming with Sphinx (named 'sphinx.ext.*') or your custom
+# ones.
+extensions = ['kernel-doc']
+
+# Gracefully handle missing rst2pdf.
+try:
+    import rst2pdf
+    extensions += ['rst2pdf.pdfbuilder']
+except ImportError:
+    pass
+
+# Add any paths that contain templates here, relative to this directory.
+templates_path = ['_templates']
+
+# The suffix(es) of source filenames.
+# You can specify multiple suffix as a list of string:
+# source_suffix = ['.rst', '.md']
+source_suffix = '.rst'
+
+# The encoding of source files.
+#source_encoding = 'utf-8-sig'
+
+# The master toctree document.
+master_doc = 'index'
+
+# General information about the project.
+project = 'The Linux Kernel'
+copyright = '2016, The kernel development community'
+author = 'The kernel development community'
+
+# The version info for the project you're documenting, acts as replacement for
+# |version| and |release|, also used in various other places throughout the
+# built documents.
+#
+# In a normal build, version and release are are set to KERNELVERSION and
+# KERNELRELEASE, respectively, from the Makefile via Sphinx command line
+# arguments.
+#
+# The following code tries to extract the information by reading the Makefile,
+# when Sphinx is run directly (e.g. by Read the Docs).
+try:
+    makefile_version = None
+    makefile_patchlevel = None
+    for line in open('../Makefile'):
+        key, val = [x.strip() for x in line.split('=', 2)]
+        if key == 'VERSION':
+            makefile_version = val
+        elif key == 'PATCHLEVEL':
+            makefile_patchlevel = val
+        if makefile_version and makefile_patchlevel:
+            break
+except:
+    pass
+finally:
+    if makefile_version and makefile_patchlevel:
+        version = release = makefile_version + '.' + makefile_patchlevel
+    else:
+        sys.stderr.write('Warning: Could not extract kernel version\n')
+        version = release = "unknown version"
+
+# The language for content autogenerated by Sphinx. Refer to documentation
+# for a list of supported languages.
+#
+# This is also used if you do content translation via gettext catalogs.
+# Usually you set "language" from the command line for these cases.
+language = None
+
+# There are two options for replacing |today|: either, you set today to some
+# non-false value, then it is used:
+#today = ''
+# Else, today_fmt is used as the format for a strftime call.
+#today_fmt = '%B %d, %Y'
+
+# List of patterns, relative to source directory, that match files and
+# directories to ignore when looking for source files.
+exclude_patterns = ['output']
+
+# The reST default role (used for this markup: `text`) to use for all
+# documents.
+#default_role = None
+
+# If true, '()' will be appended to :func: etc. cross-reference text.
+#add_function_parentheses = True
+
+# If true, the current module name will be prepended to all description
+# unit titles (such as .. function::).
+#add_module_names = True
+
+# If true, sectionauthor and moduleauthor directives will be shown in the
+# output. They are ignored by default.
+#show_authors = False
+
+# The name of the Pygments (syntax highlighting) style to use.
+pygments_style = 'sphinx'
+
+# A list of ignored prefixes for module index sorting.
+#modindex_common_prefix = []
+
+# If true, keep warnings as "system message" paragraphs in the built documents.
+#keep_warnings = False
+
+# If true, `todo` and `todoList` produce output, else they produce nothing.
+todo_include_todos = False
+
+primary_domain = 'C'
+highlight_language = 'C'
+
+# -- Options for HTML output ----------------------------------------------
+
+# The theme to use for HTML and HTML Help pages.  See the documentation for
+# a list of builtin themes.
+
+# The Read the Docs theme is available from
+# - https://github.com/snide/sphinx_rtd_theme
+# - https://pypi.python.org/pypi/sphinx_rtd_theme
+# - python-sphinx-rtd-theme package (on Debian)
+try:
+    import sphinx_rtd_theme
+    html_theme = 'sphinx_rtd_theme'
+    html_theme_path = [sphinx_rtd_theme.get_html_theme_path()]
+except ImportError:
+    sys.stderr.write('Warning: The Sphinx \'sphinx_rtd_theme\' HTML theme was not found. Make sure you have the theme installed to produce pretty HTML output. Falling back to the default theme.\n')
+
+# Theme options are theme-specific and customize the look and feel of a theme
+# further.  For a list of options available for each theme, see the
+# documentation.
+#html_theme_options = {}
+
+# Add any paths that contain custom themes here, relative to this directory.
+#html_theme_path = []
+
+# The name for this set of Sphinx documents.  If None, it defaults to
+# "<project> v<release> documentation".
+#html_title = None
+
+# A shorter title for the navigation bar.  Default is the same as html_title.
+#html_short_title = None
+
+# The name of an image file (relative to this directory) to place at the top
+# of the sidebar.
+#html_logo = None
+
+# The name of an image file (within the static path) to use as favicon of the
+# docs.  This file should be a Windows icon file (.ico) being 16x16 or 32x32
+# pixels large.
+#html_favicon = None
+
+# Add any paths that contain custom static files (such as style sheets) here,
+# relative to this directory. They are copied after the builtin static files,
+# so a file named "default.css" will overwrite the builtin "default.css".
+#html_static_path = ['_static']
+
+# Add any extra paths that contain custom files (such as robots.txt or
+# .htaccess) here, relative to this directory. These files are copied
+# directly to the root of the documentation.
+#html_extra_path = []
+
+# If not '', a 'Last updated on:' timestamp is inserted at every page bottom,
+# using the given strftime format.
+#html_last_updated_fmt = '%b %d, %Y'
+
+# If true, SmartyPants will be used to convert quotes and dashes to
+# typographically correct entities.
+#html_use_smartypants = True
+
+# Custom sidebar templates, maps document names to template names.
+#html_sidebars = {}
+
+# Additional templates that should be rendered to pages, maps page names to
+# template names.
+#html_additional_pages = {}
+
+# If false, no module index is generated.
+#html_domain_indices = True
+
+# If false, no index is generated.
+#html_use_index = True
+
+# If true, the index is split into individual pages for each letter.
+#html_split_index = False
+
+# If true, links to the reST sources are added to the pages.
+#html_show_sourcelink = True
+
+# If true, "Created using Sphinx" is shown in the HTML footer. Default is True.
+#html_show_sphinx = True
+
+# If true, "(C) Copyright ..." is shown in the HTML footer. Default is True.
+#html_show_copyright = True
+
+# If true, an OpenSearch description file will be output, and all pages will
+# contain a <link> tag referring to it.  The value of this option must be the
+# base URL from which the finished HTML is served.
+#html_use_opensearch = ''
+
+# This is the file name suffix for HTML files (e.g. ".xhtml").
+#html_file_suffix = None
+
+# Language to be used for generating the HTML full-text search index.
+# Sphinx supports the following languages:
+#   'da', 'de', 'en', 'es', 'fi', 'fr', 'h', 'it', 'ja'
+#   'nl', 'no', 'pt', 'ro', 'r', 'sv', 'tr'
+#html_search_language = 'en'
+
+# A dictionary with options for the search language support, empty by default.
+# Now only 'ja' uses this config value
+#html_search_options = {'type': 'default'}
+
+# The name of a javascript file (relative to the configuration directory) that
+# implements a search results scorer. If empty, the default will be used.
+#html_search_scorer = 'scorer.js'
+
+# Output file base name for HTML help builder.
+htmlhelp_basename = 'TheLinuxKerneldoc'
+
+# -- Options for LaTeX output ---------------------------------------------
+
+latex_elements = {
+# The paper size ('letterpaper' or 'a4paper').
+#'papersize': 'letterpaper',
+
+# The font size ('10pt', '11pt' or '12pt').
+#'pointsize': '10pt',
+
+# Additional stuff for the LaTeX preamble.
+#'preamble': '',
+
+# Latex figure (float) alignment
+#'figure_align': 'htbp',
+}
+
+# Grouping the document tree into LaTeX files. List of tuples
+# (source start file, target name, title,
+#  author, documentclass [howto, manual, or own class]).
+latex_documents = [
+    (master_doc, 'TheLinuxKernel.tex', 'The Linux Kernel Documentation',
+     'The kernel development community', 'manual'),
+]
+
+# The name of an image file (relative to this directory) to place at the top of
+# the title page.
+#latex_logo = None
+
+# For "manual" documents, if this is true, then toplevel headings are parts,
+# not chapters.
+#latex_use_parts = False
+
+# If true, show page references after internal links.
+#latex_show_pagerefs = False
+
+# If true, show URL addresses after external links.
+#latex_show_urls = False
+
+# Documents to append as an appendix to all manuals.
+#latex_appendices = []
+
+# If false, no module index is generated.
+#latex_domain_indices = True
+
+
+# -- Options for manual page output ---------------------------------------
+
+# One entry per manual page. List of tuples
+# (source start file, name, description, authors, manual section).
+man_pages = [
+    (master_doc, 'thelinuxkernel', 'The Linux Kernel Documentation',
+     [author], 1)
+]
+
+# If true, show URL addresses after external links.
+#man_show_urls = False
+
+
+# -- Options for Texinfo output -------------------------------------------
+
+# Grouping the document tree into Texinfo files. List of tuples
+# (source start file, target name, title, author,
+#  dir menu entry, description, category)
+texinfo_documents = [
+    (master_doc, 'TheLinuxKernel', 'The Linux Kernel Documentation',
+     author, 'TheLinuxKernel', 'One line description of project.',
+     'Miscellaneous'),
+]
+
+# Documents to append as an appendix to all manuals.
+#texinfo_appendices = []
+
+# If false, no module index is generated.
+#texinfo_domain_indices = True
+
+# How to display URL addresses: 'footnote', 'no', or 'inline'.
+#texinfo_show_urls = 'footnote'
+
+# If true, do not generate a @detailmenu in the "Top" node's menu.
+#texinfo_no_detailmenu = False
+
+
+# -- Options for Epub output ----------------------------------------------
+
+# Bibliographic Dublin Core info.
+epub_title = project
+epub_author = author
+epub_publisher = author
+epub_copyright = copyright
+
+# The basename for the epub file. It defaults to the project name.
+#epub_basename = project
+
+# The HTML theme for the epub output. Since the default themes are not
+# optimized for small screen space, using the same theme for HTML and epub
+# output is usually not wise. This defaults to 'epub', a theme designed to save
+# visual space.
+#epub_theme = 'epub'
+
+# The language of the text. It defaults to the language option
+# or 'en' if the language is not set.
+#epub_language = ''
+
+# The scheme of the identifier. Typical schemes are ISBN or URL.
+#epub_scheme = ''
+
+# The unique identifier of the text. This can be a ISBN number
+# or the project homepage.
+#epub_identifier = ''
+
+# A unique identification for the text.
+#epub_uid = ''
+
+# A tuple containing the cover image and cover page html template filenames.
+#epub_cover = ()
+
+# A sequence of (type, uri, title) tuples for the guide element of content.opf.
+#epub_guide = ()
+
+# HTML files that should be inserted before the pages created by sphinx.
+# The format is a list of tuples containing the path and title.
+#epub_pre_files = []
+
+# HTML files that should be inserted after the pages created by sphinx.
+# The format is a list of tuples containing the path and title.
+#epub_post_files = []
+
+# A list of files that should not be packed into the epub file.
+epub_exclude_files = ['search.html']
+
+# The depth of the table of contents in toc.ncx.
+#epub_tocdepth = 3
+
+# Allow duplicate toc entries.
+#epub_tocdup = True
+
+# Choose between 'default' and 'includehidden'.
+#epub_tocscope = 'default'
+
+# Fix unsupported image types using the Pillow.
+#epub_fix_images = False
+
+# Scale large images.
+#epub_max_image_width = 0
+
+# How to display URL addresses: 'footnote', 'no', or 'inline'.
+#epub_show_urls = 'inline'
+
+# If false, no index is generated.
+#epub_use_index = True
+
+#=======
+# rst2pdf
+#
+# Grouping the document tree into PDF files. List of tuples
+# (source start file, target name, title, author, options).
+#
+# See the Sphinx chapter of http://ralsina.me/static/manual.pdf
+#
+# FIXME: Do not add the index file here; the result will be too big. Adding
+# multiple PDF files here actually tries to get the cross-referencing right
+# *between* PDF files.
+pdf_documents = [
+    ('index', u'Kernel', u'Kernel', u'J. Random Bozo'),
+]
+
+# kernel-doc extension configuration for running Sphinx directly (e.g. by Read
+# the Docs). In a normal build, these are supplied from the Makefile via command
+# line arguments.
+kerneldoc_bin = '../scripts/kernel-doc'
+kerneldoc_srctree = '..'

Documentation/devicetree/bindings/display/imx/ldb.txt

@@ -62,6 +62,7 @@ Required properties:
    display-timings are used instead.
 
 Optional properties (required if display-timings are used):
+ - ddc-i2c-bus: phandle of an I2C controller used for DDC EDID probing
  - display-timings : A node that describes the display timings as defined in
    Documentation/devicetree/bindings/display/display-timing.txt.
  - fsl,data-mapping : should be "spwg" or "jeida"

Documentation/devicetree/bindings/display/panel/panel-dpi.txt

@@ -7,6 +7,8 @@ Required properties:
 Optional properties:
 - label: a symbolic name for the panel
 - enable-gpios: panel enable gpio
+- reset-gpios: GPIO to control the RESET pin
+- vcc-supply: phandle of regulator that will be used to enable power to the display
 
 Required nodes:
 - "panel-timing" containing video timings

Documentation/dmaengine/provider.txt

@@ -323,7 +323,7 @@ supported.
    * device_resume
      - Resumes a transfer on the channel
      - This command should operate synchronously on the channel,
-       pausing right away the work of the given channel
+       resuming right away the work of the given channel
 
    * device_terminate_all
      - Aborts all the pending and ongoing transfers on the channel

Documentation/filesystems/devpts.txt

@@ -1,141 +1,26 @@
+Each mount of the devpts filesystem is now distinct such that ptys
+and their indicies allocated in one mount are independent from ptys
+and their indicies in all other mounts.
 
-To support containers, we now allow multiple instances of devpts filesystem,
-such that indices of ptys allocated in one instance are independent of indices
-allocated in other instances of devpts.
+All mounts of the devpts filesystem now create a /dev/pts/ptmx node
+with permissions 0000.
 
-To preserve backward compatibility, this support for multiple instances is
-enabled only if:
+To retain backwards compatibility the a ptmx device node (aka any node
+created with "mknod name c 5 2") when opened will look for an instance
+of devpts under the name "pts" in the same directory as the ptmx device
+node.
 
-	- CONFIG_DEVPTS_MULTIPLE_INSTANCES=y, and
-	- '-o newinstance' mount option is specified while mounting devpts
-
-IOW, devpts now supports both single-instance and multi-instance semantics.
-
-If CONFIG_DEVPTS_MULTIPLE_INSTANCES=n, there is no change in behavior and
-this referred to as the "legacy" mode. In this mode, the new mount options
-(-o newinstance and -o ptmxmode) will be ignored with a 'bogus option' message
-on console.
-
-If CONFIG_DEVPTS_MULTIPLE_INSTANCES=y and devpts is mounted without the
-'newinstance' option (as in current start-up scripts) the new mount binds
-to the initial kernel mount of devpts. This mode is referred to as the
-'single-instance' mode and the current, single-instance semantics are
-preserved, i.e PTYs are common across the system.
-
-The only difference between this single-instance mode and the legacy mode
-is the presence of new, '/dev/pts/ptmx' node with permissions 0000, which
-can safely be ignored.
-
-If CONFIG_DEVPTS_MULTIPLE_INSTANCES=y and 'newinstance' option is specified,
-the mount is considered to be in the multi-instance mode and a new instance
-of the devpts fs is created. Any ptys created in this instance are independent
-of ptys in other instances of devpts. Like in the single-instance mode, the
-/dev/pts/ptmx node is present. To effectively use the multi-instance mode,
-open of /dev/ptmx must be a redirected to '/dev/pts/ptmx' using a symlink or
-bind-mount.
-
-Eg: A container startup script could do the following:
-
-	$ chmod 0666 /dev/pts/ptmx
-	$ rm /dev/ptmx
-	$ ln -s pts/ptmx /dev/ptmx
-	$ ns_exec -cm /bin/bash
-
-	# We are now in new container
-
-	$ umount /dev/pts
-	$ mount -t devpts -o newinstance lxcpts /dev/pts
-	$ sshd -p 1234
-
-where 'ns_exec -cm /bin/bash' calls clone() with CLONE_NEWNS flag and execs
-/bin/bash in the child process.  A pty created by the sshd is not visible in
-the original mount of /dev/pts.
+As an option instead of placing a /dev/ptmx device node at /dev/ptmx
+it is possible to place a symlink to /dev/pts/ptmx at /dev/ptmx or
+to bind mount /dev/ptx/ptmx to /dev/ptmx.  If you opt for using
+the devpts filesystem in this manner devpts should be mounted with
+the ptmxmode=0666, or chmod 0666 /dev/pts/ptmx should be called.
 
 Total count of pty pairs in all instances is limited by sysctls:
 kernel.pty.max = 4096		- global limit
-kernel.pty.reserve = 1024	- reserve for initial instance
+kernel.pty.reserve = 1024	- reserved for filesystems mounted from the initial mount namespace
 kernel.pty.nr			- current count of ptys
 
 Per-instance limit could be set by adding mount option "max=<count>".
 This feature was added in kernel 3.4 together with sysctl kernel.pty.reserve.
 In kernels older than 3.4 sysctl kernel.pty.max works as per-instance limit.
-
-User-space changes
-------------------
-
-In multi-instance mode (i.e '-o newinstance' mount option is specified at least
-once), following user-space issues should be noted.
-
-1. If -o newinstance mount option is never used, /dev/pts/ptmx can be ignored
-   and no change is needed to system-startup scripts.
-
-2. To effectively use multi-instance mode (i.e -o newinstance is specified)
-   administrators or startup scripts should "redirect" open of /dev/ptmx to
-   /dev/pts/ptmx using either a bind mount or symlink.
-
-	$ mount -t devpts -o newinstance devpts /dev/pts
-
-   followed by either
-
-	$ rm /dev/ptmx
-	$ ln -s pts/ptmx /dev/ptmx
-	$ chmod 666 /dev/pts/ptmx
-   or
-	$ mount -o bind /dev/pts/ptmx /dev/ptmx
-
-3. The '/dev/ptmx -> pts/ptmx' symlink is the preferred method since it
-   enables better error-reporting and treats both single-instance and
-   multi-instance mounts similarly.
-
-   But this method requires that system-startup scripts set the mode of
-   /dev/pts/ptmx correctly (default mode is 0000). The scripts can set the
-   mode by, either
-
-   	- adding ptmxmode mount option to devpts entry in /etc/fstab, or
-	- using 'chmod 0666 /dev/pts/ptmx'
-
-4. If multi-instance mode mount is needed for containers, but the system
-   startup scripts have not yet been updated, container-startup scripts
-   should bind mount /dev/ptmx to /dev/pts/ptmx to avoid breaking single-
-   instance mounts.
-
-   Or, in general, container-startup scripts should use:
-
-	mount -t devpts -o newinstance -o ptmxmode=0666 devpts /dev/pts
-	if [ ! -L /dev/ptmx ]; then
-		mount -o bind /dev/pts/ptmx /dev/ptmx
-	fi
-
-   When all devpts mounts are multi-instance, /dev/ptmx can permanently be
-   a symlink to pts/ptmx and the bind mount can be ignored.
-
-5. A multi-instance mount that is not accompanied by the /dev/ptmx to
-   /dev/pts/ptmx redirection would result in an unusable/unreachable pty.
-
-	mount -t devpts -o newinstance lxcpts /dev/pts
-
-   immediately followed by:
-
-	open("/dev/ptmx")
-
-    would create a pty, say /dev/pts/7, in the initial kernel mount.
-    But /dev/pts/7 would be invisible in the new mount.
-
-6. The permissions for /dev/pts/ptmx node should be specified when mounting
-   /dev/pts, using the '-o ptmxmode=%o' mount option (default is 0000).
-
-	mount -t devpts -o newinstance -o ptmxmode=0644 devpts /dev/pts
-
-   The permissions can be later be changed as usual with 'chmod'.
-
-	chmod 666 /dev/pts/ptmx
-
-7. A mount of devpts without the 'newinstance' option results in binding to
-   initial kernel mount.  This behavior while preserving legacy semantics,
-   does not provide strict isolation in a container environment. i.e by
-   mounting devpts without the 'newinstance' option, a container could
-   get visibility into the 'host' or root container's devpts.
-   
-   To workaround this and have strict isolation, all mounts of devpts,
-   including the mount in the root container, should use the newinstance
-   option.

Documentation/index.rst

@@ -0,0 +1,23 @@
+.. The Linux Kernel documentation master file, created by
+   sphinx-quickstart on Fri Feb 12 13:51:46 2016.
+   You can adapt this file completely to your liking, but it should at least
+   contain the root `toctree` directive.
+
+Welcome to The Linux Kernel's documentation!
+============================================
+
+Nothing for you to see here *yet*. Please move along.
+
+Contents:
+
+.. toctree::
+   :maxdepth: 2
+
+
+Indices and tables
+==================
+
+* :ref:`genindex`
+* :ref:`modindex`
+* :ref:`search`
+

Documentation/kdump/gdbmacros.txt

@@ -170,21 +170,92 @@ document trapinfo
 	address the kernel panicked.
 end
 
+define dump_log_idx
+	set $idx = $arg0
+	if ($argc > 1)
+		set $prev_flags = $arg1
+	else
+		set $prev_flags = 0
+	end
+	set $msg = ((struct printk_log *) (log_buf + $idx))
+	set $prefix = 1
+	set $newline = 1
+	set $log = log_buf + $idx + sizeof(*$msg)
 
-define dmesg
-	set $i = 0
-	set $end_idx = (log_end - 1) & (log_buf_len - 1)
+	# prev & LOG_CONT && !(msg->flags & LOG_PREIX)
+	if (($prev_flags & 8) && !($msg->flags & 4))
+		set $prefix = 0
+	end
+
+	# msg->flags & LOG_CONT
+	if ($msg->flags & 8)
+		# (prev & LOG_CONT && !(prev & LOG_NEWLINE))
+		if (($prev_flags & 8) && !($prev_flags & 2))
+			set $prefix = 0
+		end
+		# (!(msg->flags & LOG_NEWLINE))
+		if (!($msg->flags & 2))
+			set $newline = 0
+		end
+	end
+
+	if ($prefix)
+		printf "[%5lu.%06lu] ", $msg->ts_nsec / 1000000000, $msg->ts_nsec % 1000000000
+	end
+	if ($msg->text_len != 0)
+		eval "printf \"%%%d.%ds\", $log", $msg->text_len, $msg->text_len
+	end
+	if ($newline)
+		printf "\n"
+	end
+	if ($msg->dict_len > 0)
+		set $dict = $log + $msg->text_len
+		set $idx = 0
+		set $line = 1
+		while ($idx < $msg->dict_len)
+			if ($line)
+				printf " "
+				set $line = 0
+			end
+			set $c = $dict[$idx]
+			if ($c == '\0')
+				printf "\n"
+				set $line = 1
+			else
+				if ($c < ' ' || $c >= 127 || $c == '\\')
+					printf "\\x%02x", $c
+				else
+					printf "%c", $c
+				end
+			end
+			set $idx = $idx + 1
+		end
+		printf "\n"
+	end
+end
+document dump_log_idx
+	Dump a single log given its index in the log buffer.  The first
+	parameter is the index into log_buf, the second is optional and
+	specified the previous log buffer's flags, used for properly
+	formatting continued lines.
+end
 
-	while ($i < logged_chars)
-		set $idx = (log_end - 1 - logged_chars + $i) & (log_buf_len - 1)
+define dmesg
+	set $i = log_first_idx
+	set $end_idx = log_first_idx
+	set $prev_flags = 0
 
-		if ($idx + 100 <= $end_idx) || \
-		   ($end_idx <= $idx && $idx + 100 < log_buf_len)
-			printf "%.100s", &log_buf[$idx]
-			set $i = $i + 100
+	while (1)
+		set $msg = ((struct printk_log *) (log_buf + $i))
+		if ($msg->len == 0)
+			set $i = 0
 		else
-			printf "%c", log_buf[$idx]
-			set $i = $i + 1
+			dump_log_idx $i $prev_flags
+			set $i = $i + $msg->len
+			set $prev_flags = $msg->flags
+		end
+		if ($i == $end_idx)
+			loop_break
 		end
 	end
 end

Documentation/kernel-parameters.txt

@@ -3992,8 +3992,9 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 
 	trace_event=[event-list]
 			[FTRACE] Set and start specified trace events in order
-			to facilitate early boot debugging.
-			See also Documentation/trace/events.txt
+			to facilitate early boot debugging. The event-list is a
+			comma separated list of trace events to enable. See
+			also Documentation/trace/events.txt
 
 	trace_options=[option-list]
 			[FTRACE] Enable or disable tracer options at boot.

Documentation/mic/mpssd/mpssd.c

@@ -1538,9 +1538,9 @@ set_cmdline(struct mic_info *mic)
 
 	len = snprintf(buffer, PATH_MAX,
 		"clocksource=tsc highres=off nohz=off ");
-	len += snprintf(buffer + len, PATH_MAX,
+	len += snprintf(buffer + len, PATH_MAX - len,
 		"cpufreq_on;corec6_off;pc3_off;pc6_off ");
-	len += snprintf(buffer + len, PATH_MAX,
+	len += snprintf(buffer + len, PATH_MAX - len,
 		"ifcfg=static;address,172.31.%d.1;netmask,255.255.255.0",
 		mic->id + 1);
 

Documentation/networking/dsa/dsa.txt

@@ -369,8 +369,6 @@ does not allocate any driver private context space.
 Switch configuration
 --------------------
 
-- priv_size: additional size needed by the switch driver for its private context
-
 - tag_protocol: this is to indicate what kind of tagging protocol is supported,
   should be a valid value from the dsa_tag_protocol enum
 
@@ -416,11 +414,6 @@ PHY devices and link management
   to the switch port MDIO registers. If unavailable return a negative error
   code.
 
-- poll_link: Function invoked by DSA to query the link state of the switch
-  builtin Ethernet PHYs, per port. This function is responsible for calling
-  netif_carrier_{on,off} when appropriate, and can be used to poll all ports in a
-  single call. Executes from workqueue context.
-
 - adjust_link: Function invoked by the PHY library when a slave network device
   is attached to a PHY device. This function is responsible for appropriately
   configuring the switch port link parameters: speed, duplex, pause based on
@@ -542,6 +535,16 @@ Bridge layer
 Bridge VLAN filtering
 ---------------------
 
+- port_vlan_filtering: bridge layer function invoked when the bridge gets
+  configured for turning on or off VLAN filtering. If nothing specific needs to
+  be done at the hardware level, this callback does not need to be implemented.
+  When VLAN filtering is turned on, the hardware must be programmed with
+  rejecting 802.1Q frames which have VLAN IDs outside of the programmed allowed
+  VLAN ID map/rules.  If there is no PVID programmed into the switch port,
+  untagged frames must be rejected as well. When turned off the switch must
+  accept any 802.1Q frames irrespective of their VLAN ID, and untagged frames are
+  allowed.
+
 - port_vlan_prepare: bridge layer function invoked when the bridge prepares the
   configuration of a VLAN on the given port. If the operation is not supported
   by the hardware, this function should return -EOPNOTSUPP to inform the bridge

Documentation/networking/ip-sysctl.txt

@@ -1036,15 +1036,17 @@ proxy_arp_pvlan - BOOLEAN
 
 shared_media - BOOLEAN
 	Send(router) or accept(host) RFC1620 shared media redirects.
-	Overrides ip_secure_redirects.
+	Overrides secure_redirects.
 	shared_media for the interface will be enabled if at least one of
 	conf/{all,interface}/shared_media is set to TRUE,
 	it will be disabled otherwise
 	default TRUE
 
 secure_redirects - BOOLEAN
-	Accept ICMP redirect messages only for gateways,
-	listed in default gateway list.
+	Accept ICMP redirect messages only to gateways listed in the
+	interface's current gateway list. Even if disabled, RFC1122 redirect
+	rules still apply.
+	Overridden by shared_media.
 	secure_redirects for the interface will be enabled if at least one of
 	conf/{all,interface}/secure_redirects is set to TRUE,
 	it will be disabled otherwise

Documentation/security/keys.txt

@@ -826,7 +826,8 @@ The keyctl syscall functions are:
  (*) Compute a Diffie-Hellman shared secret or public key
 
        long keyctl(KEYCTL_DH_COMPUTE, struct keyctl_dh_params *params,
-		   char *buffer, size_t buflen);
+		   char *buffer, size_t buflen,
+		   void *reserved);
 
      The params struct contains serial numbers for three keys:
 
@@ -843,6 +844,8 @@ The keyctl syscall functions are:
      public key.  If the base is the remote public key, the result is
      the shared secret.
 
+     The reserved argument must be set to NULL.
+
      The buffer length must be at least the length of the prime, or zero.
 
      If the buffer length is nonzero, the length of the result is

Documentation/security/self-protection.txt

@@ -183,8 +183,9 @@ provide meaningful defenses.
 ### Canaries, blinding, and other secrets
 
 It should be noted that things like the stack canary discussed earlier
-are technically statistical defenses, since they rely on a (leakable)
-secret value.
+are technically statistical defenses, since they rely on a secret value,
+and such values may become discoverable through an information exposure
+flaw.
 
 Blinding literal values for things like JITs, where the executable
 contents may be partially under the control of userspace, need a similar
@@ -199,8 +200,8 @@ working?) in order to maximize their success.
 Since the location of kernel memory is almost always instrumental in
 mounting a successful attack, making the location non-deterministic
 raises the difficulty of an exploit. (Note that this in turn makes
-the value of leaks higher, since they may be used to discover desired
-memory locations.)
+the value of information exposures higher, since they may be used to
+discover desired memory locations.)
 
 #### Text and module base
 
@@ -222,14 +223,21 @@ become more difficult to locate.
 Much of the kernel's dynamic memory (e.g. kmalloc, vmalloc, etc) ends up
 being relatively deterministic in layout due to the order of early-boot
 initializations. If the base address of these areas is not the same
-between boots, targeting them is frustrated, requiring a leak specific
-to the region.
+between boots, targeting them is frustrated, requiring an information
+exposure specific to the region.
+
+#### Structure layout
+
+By performing a per-build randomization of the layout of sensitive
+structures, attacks must either be tuned to known kernel builds or expose
+enough kernel memory to determine structure layouts before manipulating
+them.
 
 
-## Preventing Leaks
+## Preventing Information Exposures
 
 Since the locations of sensitive structures are the primary target for
-attacks, it is important to defend against leaks of both kernel memory
+attacks, it is important to defend against exposure of both kernel memory
 addresses and kernel memory contents (since they may contain kernel
 addresses or other sensitive things like canary values).
 
@@ -250,8 +258,8 @@ sure structure holes are cleared.
 When releasing memory, it is best to poison the contents (clear stack on
 syscall return, wipe heap memory on a free), to avoid reuse attacks that
 rely on the old contents of memory. This frustrates many uninitialized
-variable attacks, stack info leaks, heap info leaks, and use-after-free
-attacks.
+variable attacks, stack content exposures, heap content exposures, and
+use-after-free attacks.
 
 ### Destination tracking
 

Documentation/sphinx/convert_template.sed

@@ -0,0 +1,18 @@
+#
+# Pandoc doesn't grok <function> or <structname>, so convert them
+# ahead of time.
+#
+# Use the following escapes to pass through pandoc:
+#	$bq = "`"
+#	$lt = "<"
+#	$gt = ">"
+#
+s%<function>\([^<(]\+\)()</function>%:c:func:$bq\1()$bq%g
+s%<function>\([^<(]\+\)</function>%:c:func:$bq\1()$bq%g
+s%<structname>struct *\([^<]\+\)</structname>%:c:type:$bqstruct \1 $lt\1$gt$bq%g
+s%struct <structname>\([^<]\+\)</structname>%:c:type:$bqstruct \1 $lt\1$gt$bq%g
+s%<structname>\([^<]\+\)</structname>%:c:type:$bqstruct \1 $lt\1$gt$bq%g
+#
+# Wrap docproc directives in para and code blocks.
+#
+s%^\(!.*\)$%<para><code>DOCPROC: \1</code></para>%

Documentation/sphinx/kernel-doc.py

@@ -0,0 +1,127 @@
+# coding=utf-8
+#
+# Copyright © 2016 Intel Corporation
+#
+# Permission is hereby granted, free of charge, to any person obtaining a
+# copy of this software and associated documentation files (the "Software"),
+# to deal in the Software without restriction, including without limitation
+# the rights to use, copy, modify, merge, publish, distribute, sublicense,
+# and/or sell copies of the Software, and to permit persons to whom the
+# Software is furnished to do so, subject to the following conditions:
+#
+# The above copyright notice and this permission notice (including the next
+# paragraph) shall be included in all copies or substantial portions of the
+# Software.
+#
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+# THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+# LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+# FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
+# IN THE SOFTWARE.
+#
+# Authors:
+#    Jani Nikula <jani.nikula@intel.com>
+#
+# Please make sure this works on both python2 and python3.
+#
+
+import os
+import subprocess
+import sys
+import re
+
+from docutils import nodes, statemachine
+from docutils.statemachine import ViewList
+from docutils.parsers.rst import directives
+from sphinx.util.compat import Directive
+
+class KernelDocDirective(Directive):
+    """Extract kernel-doc comments from the specified file"""
+    required_argument = 1
+    optional_arguments = 4
+    option_spec = {
+        'doc': directives.unchanged_required,
+        'functions': directives.unchanged_required,
+        'export': directives.flag,
+        'internal': directives.flag,
+    }
+    has_content = False
+
+    def run(self):
+        env = self.state.document.settings.env
+        cmd = [env.config.kerneldoc_bin, '-rst', '-enable-lineno']
+
+        filename = env.config.kerneldoc_srctree + '/' + self.arguments[0]
+
+        # Tell sphinx of the dependency
+        env.note_dependency(os.path.abspath(filename))
+
+        tab_width = self.options.get('tab-width', self.state.document.settings.tab_width)
+        source = filename
+
+        # FIXME: make this nicer and more robust against errors
+        if 'export' in self.options:
+            cmd += ['-export']
+        elif 'internal' in self.options:
+            cmd += ['-internal']
+        elif 'doc' in self.options:
+            cmd += ['-function', str(self.options.get('doc'))]
+        elif 'functions' in self.options:
+            for f in str(self.options.get('functions')).split(' '):
+                cmd += ['-function', f]
+
+        cmd += [filename]
+
+        try:
+            env.app.verbose('calling kernel-doc \'%s\'' % (" ".join(cmd)))
+
+            p = subprocess.Popen(cmd, stdout=subprocess.PIPE, stderr=subprocess.PIPE, universal_newlines=True)
+            out, err = p.communicate()
+
+            # python2 needs conversion to unicode.
+            # python3 with universal_newlines=True returns strings.
+            if sys.version_info.major < 3:
+                out, err = unicode(out, 'utf-8'), unicode(err, 'utf-8')
+
+            if p.returncode != 0:
+                sys.stderr.write(err)
+
+                env.app.warn('kernel-doc \'%s\' failed with return code %d' % (" ".join(cmd), p.returncode))
+                return [nodes.error(None, nodes.paragraph(text = "kernel-doc missing"))]
+            elif env.config.kerneldoc_verbosity > 0:
+                sys.stderr.write(err)
+
+            lines = statemachine.string2lines(out, tab_width, convert_whitespace=True)
+            result = ViewList()
+
+            lineoffset = 0;
+            line_regex = re.compile("^#define LINENO ([0-9]+)$")
+            for line in lines:
+                match = line_regex.search(line)
+                if match:
+                    # sphinx counts lines from 0
+                    lineoffset = int(match.group(1)) - 1
+                    # we must eat our comments since the upset the markup
+                else:
+                    result.append(line, source, lineoffset)
+                    lineoffset += 1
+
+            node = nodes.section()
+            node.document = self.state.document
+            self.state.nested_parse(result, self.content_offset, node)
+
+            return node.children
+
+        except Exception as e:
+            env.app.warn('kernel-doc \'%s\' processing failed with: %s' %
+                         (" ".join(cmd), str(e)))
+            return [nodes.error(None, nodes.paragraph(text = "kernel-doc missing"))]
+
+def setup(app):
+    app.add_config_value('kerneldoc_bin', None, 'env')
+    app.add_config_value('kerneldoc_srctree', None, 'env')
+    app.add_config_value('kerneldoc_verbosity', 1, 'env')
+
+    app.add_directive('kernel-doc', KernelDocDirective)

Documentation/sphinx/post_convert.sed

@@ -0,0 +1,23 @@
+#
+# Unescape.
+#
+s/$bq/`/g
+s/$lt/</g
+s/$gt/>/g
+#
+# pandoc thinks that both "_" needs to be escaped.  Remove the extra
+# backslashes.
+#
+s/\\_/_/g
+#
+# Unwrap docproc directives.
+#
+s/^``DOCPROC: !E\(.*\)``$/.. kernel-doc:: \1\n   :export:/
+s/^``DOCPROC: !I\(.*\)``$/.. kernel-doc:: \1\n   :internal:/
+s/^``DOCPROC: !F\([^ ]*\) \(.*\)``$/.. kernel-doc:: \1\n   :functions: \2/
+s/^``DOCPROC: !P\([^ ]*\) \(.*\)``$/.. kernel-doc:: \1\n   :doc: \2/
+s/^``DOCPROC: \(!.*\)``$/.. WARNING: DOCPROC directive not supported: \1/
+#
+# Trim trailing whitespace.
+#
+s/[[:space:]]*$//

Documentation/sphinx/tmplcvt

@@ -0,0 +1,19 @@
+#!/bin/bash
+#
+# Convert a template file into something like RST
+#
+# fix <function>
+# feed to pandoc
+# fix \_
+# title line?
+#
+
+in=$1
+rst=$2
+tmp=$rst.tmp
+
+cp $in $tmp
+sed --in-place -f convert_template.sed $tmp
+pandoc -s -S -f docbook -t rst -o $rst $tmp
+sed --in-place -f post_convert.sed $rst
+rm $tmp

Documentation/sync_file.txt

@@ -6,8 +6,8 @@
 
 This document serves as a guide for device drivers writers on what the
 sync_file API is, and how drivers can support it. Sync file is the carrier of
-the fences(struct fence) that needs to synchronized between drivers or across
-process boundaries.
+the fences(struct fence) that are needed to synchronize between drivers or
+across process boundaries.
 
 The sync_file API is meant to be used to send and receive fence information
 to/from userspace. It enables userspace to do explicit fencing, where instead
@@ -32,7 +32,7 @@ in-fences and out-fences
 Sync files can go either to or from userspace. When a sync_file is sent from
 the driver to userspace we call the fences it contains 'out-fences'. They are
 related to a buffer that the driver is processing or is going to process, so
-the driver an create out-fence to be able to notify, through fence_signal(),
+the driver creates an out-fence to be able to notify, through fence_signal(),
 when it has finished using (or processing) that buffer. Out-fences are fences
 that the driver creates.
 

Documentation/zh_CN/CodingStyle

@@ -24,34 +24,33 @@ Documentation/CodingStyle的中文翻译
 
 		Linux内核代码风格
 
-这是一个简短的文档，描述了linux内核的首选代码风格。代码风格是因人而异的，而且我
-不愿意把我的观点强加给任何人，不过这里所讲述的是我必须要维护的代码所遵守的风格，
-并且我也希望绝大多数其他代码也能遵守这个风格。请在写代码时至少考虑一下本文所述的
-风格。
+这是一个简短的文档，描述了 linux 内核的首选代码风格。代码风格是因人而异的，而且我
+不愿意把自己的观点强加给任何人，但这就像我去做任何事情都必须遵循的原则那样，我也
+希望在绝大多数事上保持这种的态度。请（在写代码时）至少考虑一下这里的代码风格。
 
-首先，我建议你打印一份GNU代码规范，然后不要读它。烧了它，这是一个具有重大象征性
-意义的动作。
+首先，我建议你打印一份 GNU 代码规范，然后不要读。烧了它，这是一个具有重大象征性意义
+的动作。
 
 不管怎样，现在我们开始：
 
 
-	 	第一章：缩进
+		第一章：缩进
 
-制表符是8个字符，所以缩进也是8个字符。有些异端运动试图将缩进变为4（乃至2）个字符
-深，这几乎相当于尝试将圆周率的值定义为3。
+制表符是 8 个字符，所以缩进也是 8 个字符。有些异端运动试图将缩进变为 4（甚至 2！）
+个字符深，这几乎相当于尝试将圆周率的值定义为 3。
 
 理由：缩进的全部意义就在于清楚的定义一个控制块起止于何处。尤其是当你盯着你的屏幕
-连续看了20小时之后，你将会发现大一点的缩进会使你更容易分辨缩进。
+连续看了 20 小时之后，你将会发现大一点的缩进会使你更容易分辨缩进。
 
-现在，有些人会抱怨8个字符的缩进会使代码向右边移动的太远，在80个字符的终端屏幕上
-就很难读这样的代码。这个问题的答案是，如果你需要3级以上的缩进，不管用何种方式你
+现在，有些人会抱怨 8 个字符的缩进会使代码向右边移动的太远，在 80 个字符的终端屏幕上
+就很难读这样的代码。这个问题的答案是，如果你需要 3 级以上的缩进，不管用何种方式你
 的代码已经有问题了，应该修正你的程序。
 
-简而言之，8个字符的缩进可以让代码更容易阅读，还有一个好处是当你的函数嵌套太深的
+简而言之，8 个字符的缩进可以让代码更容易阅读，还有一个好处是当你的函数嵌套太深的
 时候可以给你警告。留心这个警告。
 
-在switch语句中消除多级缩进的首选的方式是让“switch”和从属于它的“case”标签对齐于同
-一列，而不要“两次缩进”“case”标签。比如：
+在 switch 语句中消除多级缩进的首选的方式是让 “switch” 和从属于它的 “case” 标签
+对齐于同一列，而不要 “两次缩进” “case” 标签。比如：
 
 	switch (suffix) {
 	case 'G':
@@ -70,7 +69,6 @@ Documentation/CodingStyle的中文翻译
 		break;
 	}
 
-
 不要把多个语句放在一行里，除非你有什么东西要隐藏：
 
 	if (condition) do_this;
@@ -79,7 +77,7 @@ Documentation/CodingStyle的中文翻译
 也不要在一行里放多个赋值语句。内核代码风格超级简单。就是避免可能导致别人误读的表
 达式。
 
-除了注释、文档和Kconfig之外，不要使用空格来缩进，前面的例子是例外，是有意为之。
+除了注释、文档和 Kconfig 之外，不要使用空格来缩进，前面的例子是例外，是有意为之。
 
 选用一个好的编辑器，不要在行尾留空格。
 
@@ -88,27 +86,18 @@ Documentation/CodingStyle的中文翻译
 
 代码风格的意义就在于使用平常使用的工具来维持代码的可读性和可维护性。
 
-每一行的长度的限制是80列，我们强烈建议您遵守这个惯例。
+每一行的长度的限制是 80 列，我们强烈建议您遵守这个惯例。
 
-长于80列的语句要打散成有意义的片段。每个片段要明显短于原来的语句，而且放置的位置
-也明显的靠右。同样的规则也适用于有很长参数列表的函数头。长字符串也要打散成较短的
-字符串。唯一的例外是超过80列可以大幅度提高可读性并且不会隐藏信息的情况。
-
-void fun(int a, int b, int c)
-{
-	if (condition)
-		printk(KERN_WARNING "Warning this is a long printk with "
-						"3 parameters a: %u b: %u "
-						"c: %u \n", a, b, c);
-	else
-		next_statement;
-}
+长于 80 列的语句要打散成有意义的片段。除非超过 80 列能显著增加可读性，并且不会隐藏
+信息。子片段要明显短于母片段，并明显靠右。这同样适用于有着很长参数列表的函数头。
+然而，绝对不要打散对用户可见的字符串，例如 printk 信息，因为这将导致无法 grep 这些
+信息。
 
 		第三章：大括号和空格的放置
 
 C语言风格中另外一个常见问题是大括号的放置。和缩进大小不同，选择或弃用某种放置策
-略并没有多少技术上的原因，不过首选的方式，就像Kernighan和Ritchie展示给我们的，是
-把起始大括号放在行尾，而把结束大括号放在行首，所以：
+略并没有多少技术上的原因，不过首选的方式，就像 Kernighan 和 Ritchie 展示给我们的，
+是把起始大括号放在行尾，而把结束大括号放在行首，所以：
 
 	if (x is true) {
 		we do y
@@ -134,12 +123,12 @@ C语言风格中另外一个常见问题是大括号的放置。和缩进大小
 		body of function
 	}
 
-全世界的异端可能会抱怨这个不一致性是……呃……不一致的，不过所有思维健全的人都知道（
-a）K&R是_正确的_，并且（b）K&R是正确的。此外，不管怎样函数都是特殊的（在C语言中
-，函数是不能嵌套的）。
+全世界的异端可能会抱怨这个不一致性是……呃……不一致的，不过所有思维健全的人都知道
+(a) K&R 是 _正确的_，并且 (b) K&R 是正确的。此外，不管怎样函数都是特殊的（C
+函数是不能嵌套的）。
 
-注意结束大括号独自占据一行，除非它后面跟着同一个语句的剩余部分，也就是do语句中的
-“while”或者if语句中的“else”，像这样：
+注意结束大括号独自占据一行，除非它后面跟着同一个语句的剩余部分，也就是 do 语句中的
+“while” 或者 if 语句中的 “else”，像这样：
 
 	do {
 		body of do-loop
@@ -158,41 +147,50 @@ a）K&R是_正确的_，并且（b）K&R是正确的。此外，不管怎样函
 理由：K&R。
 
 也请注意这种大括号的放置方式也能使空（或者差不多空的）行的数量最小化，同时不失可
-读性。因此，由于你的屏幕上的新行是不可再生资源（想想25行的终端屏幕），你将会有更
+读性。因此，由于你的屏幕上的新行是不可再生资源（想想 25 行的终端屏幕），你将会有更
 多的空行来放置注释。
 
 当只有一个单独的语句的时候，不用加不必要的大括号。
 
-if (condition)
-	action();
+	if (condition)
+		action();
+
+和
+
+	if (condition)
+		do_this();
+	else
+		do_that();
 
-这点不适用于本身为某个条件语句的一个分支的单独语句。这时需要在两个分支里都使用大
-括号。
+这并不适用于只有一个条件分支是单语句的情况；这时所有分支都要使用大括号：
 
-if (condition) {
-	do_this();
-	do_that();
-} else {
-	otherwise();
-}
+	if (condition) {
+		do_this();
+		do_that();
+	} else {
+		otherwise();
+	}
 
 		3.1：空格
 
-Linux内核的空格使用方式（主要）取决于它是用于函数还是关键字。（大多数）关键字后
-要加一个空格。值得注意的例外是sizeof、typeof、alignof和__attribute__，这些关键字
-某些程度上看起来更像函数（它们在Linux里也常常伴随小括号而使用，尽管在C语言里这样
-的小括号不是必需的，就像“struct fileinfo info”声明过后的“sizeof info”）。
+Linux 内核的空格使用方式（主要）取决于它是用于函数还是关键字。（大多数）关键字后
+要加一个空格。值得注意的例外是 sizeof、typeof、alignof 和 __attribute__，这些
+关键字某些程度上看起来更像函数（它们在 Linux 里也常常伴随小括号而使用，尽管在 C 里
+这样的小括号不是必需的，就像 “struct fileinfo info” 声明过后的 “sizeof info”）。
 
 所以在这些关键字之后放一个空格：
+
 	if, switch, case, for, do, while
-但是不要在sizeof、typeof、alignof或者__attribute__这些关键字之后放空格。例如，
+
+但是不要在 sizeof、typeof、alignof 或者 __attribute__ 这些关键字之后放空格。例如，
+
 	s = sizeof(struct file);
 
 不要在小括号里的表达式两侧加空格。这是一个反例：
 
 	s = sizeof( struct file );
 
-当声明指针类型或者返回指针类型的函数时，“*”的首选使用方式是使之靠近变量名或者函
+当声明指针类型或者返回指针类型的函数时，“*” 的首选使用方式是使之靠近变量名或者函
 数名，而不是靠近类型名。例子：
 
 	char *linux_banner;
@@ -204,15 +202,18 @@ Linux内核的空格使用方式（主要）取决于它是用于函数还是关
 	=  +  -  <  >  *  /  %  |  &  ^  <=  >=  ==  !=  ?  :
 
 但是一元操作符后不要加空格：
+
 	&  *  +  -  ~  !  sizeof  typeof  alignof  __attribute__  defined
 
 后缀自加和自减一元操作符前不加空格：
+
 	++  --
 
 前缀自加和自减一元操作符后不加空格：
+
 	++  --
 
-“.”和“->”结构体成员操作符前后不加空格。
+‘.’ 和 “->” 结构体成员操作符前后不加空格。
 
 不要在行尾留空白。有些可以自动缩进的编辑器会在新行的行首加入适量的空白，然后你
 就可以直接在那一行输入代码。不过假如你最后没有在那一行输入代码，有些编辑器就不
@@ -225,23 +226,23 @@ Linux内核的空格使用方式（主要）取决于它是用于函数还是关
 
 		第四章：命名
 
-C是一个简朴的语言，你的命名也应该这样。和Modula-2和Pascal程序员不同，C程序员不使
-用类似ThisVariableIsATemporaryCounter这样华丽的名字。C程序员会称那个变量为“tmp”
-，这样写起来会更容易，而且至少不会令其难于理解。
+C是一个简朴的语言，你的命名也应该这样。和 Modula-2 和 Pascal 程序员不同，C 程序员
+不使用类似 ThisVariableIsATemporaryCounter 这样华丽的名字。C 程序员会称那个变量
+为 “tmp”，这样写起来会更容易，而且至少不会令其难于理解。
 
 不过，虽然混用大小写的名字是不提倡使用的，但是全局变量还是需要一个具描述性的名字
-。称一个全局函数为“foo”是一个难以饶恕的错误。
+。称一个全局函数为 “foo” 是一个难以饶恕的错误。
 
 全局变量（只有当你真正需要它们的时候再用它）需要有一个具描述性的名字，就像全局函
-数。如果你有一个可以计算活动用户数量的函数，你应该叫它“count_active_users()”或者
-类似的名字，你不应该叫它“cntuser()”。
+数。如果你有一个可以计算活动用户数量的函数，你应该叫它 “count_active_users()”
+或者类似的名字，你不应该叫它 “cntuser()”。
 
 在函数名中包含函数类型（所谓的匈牙利命名法）是脑子出了问题——编译器知道那些类型而
 且能够检查那些类型，这样做只能把程序员弄糊涂了。难怪微软总是制造出有问题的程序。
 
 本地变量名应该简短，而且能够表达相关的含义。如果你有一些随机的整数型的循环计数器
-，它应该被称为“i”。叫它“loop_counter”并无益处，如果它没有被误解的可能的话。类似
-的，“tmp”可以用来称呼任意类型的临时变量。
+，它应该被称为 “i”。叫它 “loop_counter” 并无益处，如果它没有被误解的可能的话。
+类似的，“tmp” 可以用来称呼任意类型的临时变量。
 
 如果你怕混淆了你的本地变量名，你就遇到另一个问题了，叫做函数增长荷尔蒙失衡综合症
 。请看第六章（函数）。
@@ -249,9 +250,9 @@ C是一个简朴的语言，你的命名也应该这样。和Modula-2和Pascal
 
 		第五章：Typedef
 
-不要使用类似“vps_t”之类的东西。
+不要使用类似 “vps_t” 之类的东西。
 
-对结构体和指针使用typedef是一个错误。当你在代码里看到：
+对结构体和指针使用 typedef 是一个错误。当你在代码里看到：
 
 	vps_t a;
 
@@ -261,91 +262,91 @@ C是一个简朴的语言，你的命名也应该这样。和Modula-2和Pascal
 
 	struct virtual_container *a;
 
-你就知道“a”是什么了。
+你就知道 “a” 是什么了。
 
-很多人认为typedef“能提高可读性”。实际不是这样的。它们只在下列情况下有用：
+很多人认为 typedef “能提高可读性”。实际不是这样的。它们只在下列情况下有用：
 
- (a) 完全不透明的对象（这种情况下要主动使用typedef来隐藏这个对象实际上是什么）。
+ (a) 完全不透明的对象（这种情况下要主动使用 typedef 来隐藏这个对象实际上是什么）。
 
-     例如：“pte_t”等不透明对象，你只能用合适的访问函数来访问它们。
+     例如：“pte_t” 等不透明对象，你只能用合适的访问函数来访问它们。
 
-     注意！不透明性和“访问函数”本身是不好的。我们使用pte_t等类型的原因在于真的是
+     注意！不透明性和“访问函数”本身是不好的。我们使用 pte_t 等类型的原因在于真的是
      完全没有任何共用的可访问信息。
 
- (b) 清楚的整数类型，如此，这层抽象就可以帮助消除到底是“int”还是“long”的混淆。
+ (b) 清楚的整数类型，如此，这层抽象就可以帮助消除到底是 “int” 还是 “long” 的混淆。
 
-     u8/u16/u32是完全没有问题的typedef，不过它们更符合类别(d)而不是这里。
+     u8/u16/u32 是完全没有问题的 typedef，不过它们更符合类别 (d) 而不是这里。
 
-     再次注意！要这样做，必须事出有因。如果某个变量是“unsigned long“，那么没有必要
+     再次注意！要这样做，必须事出有因。如果某个变量是 “unsigned long“，那么没有必要
 
 	typedef unsigned long myflags_t;
 
-     不过如果有一个明确的原因，比如它在某种情况下可能会是一个“unsigned int”而在
-     其他情况下可能为“unsigned long”，那么就不要犹豫，请务必使用typedef。
+     不过如果有一个明确的原因，比如它在某种情况下可能会是一个 “unsigned int” 而在
+     其他情况下可能为 “unsigned long”，那么就不要犹豫，请务必使用 typedef。
 
  (c) 当你使用sparse按字面的创建一个新类型来做类型检查的时候。
 
  (d) 和标准C99类型相同的类型，在某些例外的情况下。
 
-     虽然让眼睛和脑筋来适应新的标准类型比如“uint32_t”不需要花很多时间，可是有些
+     虽然让眼睛和脑筋来适应新的标准类型比如 “uint32_t” 不需要花很多时间，可是有些
      人仍然拒绝使用它们。
 
-     因此，Linux特有的等同于标准类型的“u8/u16/u32/u64”类型和它们的有符号类型是被
+     因此，Linux 特有的等同于标准类型的 “u8/u16/u32/u64” 类型和它们的有符号类型是被
      允许的——尽管在你自己的新代码中，它们不是强制要求要使用的。
 
      当编辑已经使用了某个类型集的已有代码时，你应该遵循那些代码中已经做出的选择。
 
  (e) 可以在用户空间安全使用的类型。
 
-     在某些用户空间可见的结构体里，我们不能要求C99类型而且不能用上面提到的“u32”
-     类型。因此，我们在与用户空间共享的所有结构体中使用__u32和类似的类型。
+     在某些用户空间可见的结构体里，我们不能要求C99类型而且不能用上面提到的 “u32”
+     类型。因此，我们在与用户空间共享的所有结构体中使用 __u32 和类似的类型。
 
-可能还有其他的情况，不过基本的规则是永远不要使用typedef，除非你可以明确的应用上
+可能还有其他的情况，不过基本的规则是永远不要使用 typedef，除非你可以明确的应用上
 述某个规则中的一个。
 
 总的来说，如果一个指针或者一个结构体里的元素可以合理的被直接访问到，那么它们就不
-应该是一个typedef。
+应该是一个 typedef。
 
 
 		第六章：函数
 
 函数应该简短而漂亮，并且只完成一件事情。函数应该可以一屏或者两屏显示完（我们都知
-道ISO/ANSI屏幕大小是80x24），只做一件事情，而且把它做好。
+道 ISO/ANSI 屏幕大小是 80x24），只做一件事情，而且把它做好。
 
 一个函数的最大长度是和该函数的复杂度和缩进级数成反比的。所以，如果你有一个理论上
-很简单的只有一个很长（但是简单）的case语句的函数，而且你需要在每个case里做很多很
-小的事情，这样的函数尽管很长，但也是可以的。
+很简单的只有一个很长（但是简单）的 case 语句的函数，而且你需要在每个 case 里做
+很多很小的事情，这样的函数尽管很长，但也是可以的。
 
 不过，如果你有一个复杂的函数，而且你怀疑一个天分不是很高的高中一年级学生可能甚至
 搞不清楚这个函数的目的，你应该严格的遵守前面提到的长度限制。使用辅助函数，并为之
 取个具描述性的名字（如果你觉得它们的性能很重要的话，可以让编译器内联它们，这样的
 效果往往会比你写一个复杂函数的效果要好。）
 
-函数的另外一个衡量标准是本地变量的数量。此数量不应超过5－10个，否则你的函数就有
+函数的另外一个衡量标准是本地变量的数量。此数量不应超过 5－10 个，否则你的函数就有
 问题了。重新考虑一下你的函数，把它分拆成更小的函数。人的大脑一般可以轻松的同时跟
-踪7个不同的事物，如果再增多的话，就会糊涂了。即便你聪颖过人，你也可能会记不清你2
-个星期前做过的事情。
+踪 7 个不同的事物，如果再增多的话，就会糊涂了。即便你聪颖过人，你也可能会记不清你
+2 个星期前做过的事情。
 
-在源文件里，使用空行隔开不同的函数。如果该函数需要被导出，它的EXPORT*宏应该紧贴
+在源文件里，使用空行隔开不同的函数。如果该函数需要被导出，它的 EXPORT* 宏应该紧贴
 在它的结束大括号之下。比如：
 
-int system_is_up(void)
-{
-	return system_state == SYSTEM_RUNNING;
-}
-EXPORT_SYMBOL(system_is_up);
+	int system_is_up(void)
+	{
+		return system_state == SYSTEM_RUNNING;
+	}
+	EXPORT_SYMBOL(system_is_up);
 
-在函数原型中，包含函数名和它们的数据类型。虽然C语言里没有这样的要求，在Linux里这
+在函数原型中，包含函数名和它们的数据类型。虽然C语言里没有这样的要求，在 Linux 里这
 是提倡的做法，因为这样可以很简单的给读者提供更多的有价值的信息。
 
 
 		第七章：集中的函数退出途径
 
-虽然被某些人声称已经过时，但是goto语句的等价物还是经常被编译器所使用，具体形式是
+虽然被某些人声称已经过时，但是 goto 语句的等价物还是经常被编译器所使用，具体形式是
 无条件跳转指令。
 
-当一个函数从多个位置退出并且需要做一些通用的清理工作的时候，goto的好处就显现出来
-了。
+当一个函数从多个位置退出，并且需要做一些类似清理的常见操作时，goto 语句就很方便了。
+如果并不需要清理操作，那么直接 return 即可。
 
 理由是：
 
@@ -354,26 +355,37 @@ EXPORT_SYMBOL(system_is_up);
 - 可以避免由于修改时忘记更新某个单独的退出点而导致的错误
 - 减轻了编译器的工作，无需删除冗余代码;)
 
-int fun(int a)
-{
-	int result = 0;
-	char *buffer = kmalloc(SIZE);
-
-	if (buffer == NULL)
-		return -ENOMEM;
-
-	if (condition1) {
-		while (loop1) {
-			...
+	int fun(int a)
+	{
+		int result = 0;
+		char *buffer;
+
+		buffer = kmalloc(SIZE, GFP_KERNEL);
+		if (!buffer)
+			return -ENOMEM;
+
+		if (condition1) {
+			while (loop1) {
+				...
+			}
+			result = 1;
+			goto out_buffer;
 		}
-		result = 1;
-		goto out;
+		...
+	out_buffer:
+		kfree(buffer);
+		return result;
 	}
-	...
-out:
-	kfree(buffer);
-	return result;
-}
+
+一个需要注意的常见错误是“一个 err 错误”，就像这样：
+
+	err:
+		kfree(foo->bar);
+		kfree(foo);
+		return ret;
+
+这段代码的错误是，在某些退出路径上 “foo” 是 NULL。通常情况下，通过把它分离成两个
+错误标签 “err_bar:” 和 “err_foo:” 来修复这个错误。
 
 		第八章：注释
 
@@ -386,10 +398,10 @@ out:
 加太多。你应该做的，是把注释放在函数的头部，告诉人们它做了什么，也可以加上它做这
 些事情的原因。
 
-当注释内核API函数时，请使用kernel-doc格式。请看
-Documentation/kernel-doc-nano-HOWTO.txt和scripts/kernel-doc以获得详细信息。
+当注释内核API函数时，请使用 kernel-doc 格式。请看
+Documentation/kernel-doc-nano-HOWTO.txt和scripts/kernel-doc 以获得详细信息。
 
-Linux的注释风格是C89“/* ... */”风格。不要使用C99风格“// ...”注释。
+Linux的注释风格是 C89 “/* ... */” 风格。不要使用 C99 风格 “// ...” 注释。
 
 长（多行）的首选注释风格是：
 
@@ -402,6 +414,15 @@ Linux的注释风格是C89“/* ... */”风格。不要使用C99风格“// ...
 	 * with beginning and ending almost-blank lines.
 	 */
 
+对于在 net/ 和 drivers/net/ 的文件，首选的长（多行）注释风格有些不同。
+
+	/* The preferred comment style for files in net/ and drivers/net
+	 * looks like this.
+	 *
+	 * It is nearly the same as the generally preferred comment style,
+	 * but there is no initial almost-blank line.
+	 */
+
 注释数据也是很重要的，不管是基本类型还是衍生类型。为了方便实现这一点，每一行应只
 声明一个数据（不要使用逗号来一次声明多个数据）。这样你就有空间来为每个数据写一段
 小注释来解释它们的用途了。
@@ -409,49 +430,63 @@ Linux的注释风格是C89“/* ... */”风格。不要使用C99风格“// ...
 
 		第九章：你已经把事情弄糟了
 
-这没什么，我们都是这样。可能你的使用了很长时间Unix的朋友已经告诉你“GNU emacs”能
-自动帮你格式化C源代码，而且你也注意到了，确实是这样，不过它所使用的默认值和我们
-想要的相去甚远（实际上，甚至比随机打的还要差——无数个猴子在GNU emacs里打字永远不
-会创造出一个好程序）（译注：请参考Infinite Monkey Theorem）
-
-所以你要么放弃GNU emacs，要么改变它让它使用更合理的设定。要采用后一个方案，你可
-以把下面这段粘贴到你的.emacs文件里。
-
-(defun linux-c-mode ()
-  "C mode with adjusted defaults for use with the Linux kernel."
-  (interactive)
-  (c-mode)
-  (c-set-style "K&R")
-  (setq tab-width 8)
-  (setq indent-tabs-mode t)
-  (setq c-basic-offset 8))
-
-这样就定义了M-x linux-c-mode命令。当你hack一个模块的时候，如果你把字符串
--*- linux-c -*-放在头两行的某个位置，这个模式将会被自动调用。如果你希望在你修改
-/usr/src/linux里的文件时魔术般自动打开linux-c-mode的话，你也可能需要添加
-
-(setq auto-mode-alist (cons '("/usr/src/linux.*/.*\\.[ch]$" . linux-c-mode)
-			auto-mode-alist))
-
-到你的.emacs文件里。
-
-不过就算你尝试让emacs正确的格式化代码失败了，也并不意味着你失去了一切：还可以用“
-indent”。
-
-不过，GNU indent也有和GNU emacs一样有问题的设定，所以你需要给它一些命令选项。不
-过，这还不算太糟糕，因为就算是GNU indent的作者也认同K&R的权威性（GNU的人并不是坏
-人，他们只是在这个问题上被严重的误导了），所以你只要给indent指定选项“-kr -i8”
-（代表“K&R，8个字符缩进”），或者使用“scripts/Lindent”，这样就可以以最时髦的方式
+这没什么，我们都是这样。可能你的使用了很长时间 Unix 的朋友已经告诉你 “GNU emacs” 能
+自动帮你格式化 C 源代码，而且你也注意到了，确实是这样，不过它所使用的默认值和我们
+想要的相去甚远（实际上，甚至比随机打的还要差——无数个猴子在 GNU emacs 里打字永远不
+会创造出一个好程序）（译注：请参考 Infinite Monkey Theorem）
+
+所以你要么放弃 GNU emacs，要么改变它让它使用更合理的设定。要采用后一个方案，你可
+以把下面这段粘贴到你的 .emacs 文件里。
+
+(defun c-lineup-arglist-tabs-only (ignored)
+  "Line up argument lists by tabs, not spaces"
+  (let* ((anchor (c-langelem-pos c-syntactic-element))
+         (column (c-langelem-2nd-pos c-syntactic-element))
+         (offset (- (1+ column) anchor))
+         (steps (floor offset c-basic-offset)))
+    (* (max steps 1)
+       c-basic-offset)))
+
+(add-hook 'c-mode-common-hook
+          (lambda ()
+            ;; Add kernel style
+            (c-add-style
+             "linux-tabs-only"
+             '("linux" (c-offsets-alist
+                        (arglist-cont-nonempty
+                         c-lineup-gcc-asm-reg
+                         c-lineup-arglist-tabs-only))))))
+
+(add-hook 'c-mode-hook
+          (lambda ()
+            (let ((filename (buffer-file-name)))
+              ;; Enable kernel mode for the appropriate files
+              (when (and filename
+                         (string-match (expand-file-name "~/src/linux-trees")
+                                       filename))
+                (setq indent-tabs-mode t)
+                (setq show-trailing-whitespace t)
+                (c-set-style "linux-tabs-only")))))
+
+这会让 emacs 在 ~/src/linux-trees 目录下的 C 源文件获得更好的内核代码风格。
+
+不过就算你尝试让 emacs 正确的格式化代码失败了，也并不意味着你失去了一切：还可以用
+“indent”。
+
+不过，GNU indent 也有和 GNU emacs 一样有问题的设定，所以你需要给它一些命令选项。不
+过，这还不算太糟糕，因为就算是 GNU indent 的作者也认同 K&R 的权威性（GNU 的人并不是
+坏人，他们只是在这个问题上被严重的误导了），所以你只要给 indent 指定选项 “-kr -i8”
+（代表 “K&R，8 个字符缩进”），或者使用 “scripts/Lindent”，这样就可以以最时髦的方式
 缩进源代码。
 
-“indent”有很多选项，特别是重新格式化注释的时候，你可能需要看一下它的手册页。不过
-记住：“indent”不能修正坏的编程习惯。
+“indent” 有很多选项，特别是重新格式化注释的时候，你可能需要看一下它的手册页。不过
+记住：“indent” 不能修正坏的编程习惯。
 
 
-		第十章：Kconfig配置文件
+		第十章：Kconfig 配置文件
 
-对于遍布源码树的所有Kconfig*配置文件来说，它们缩进方式与C代码相比有所不同。紧挨
-在“config”定义下面的行缩进一个制表符，帮助信息则再多缩进2个空格。比如：
+对于遍布源码树的所有 Kconfig* 配置文件来说，它们缩进方式与 C 代码相比有所不同。紧挨
+在 “config” 定义下面的行缩进一个制表符，帮助信息则再多缩进 2 个空格。比如：
 
 config AUDIT
 	bool "Auditing support"
@@ -470,7 +505,7 @@ config ADFS_FS_RW
 	depends on ADFS_FS
 	...
 
-要查看配置文件的完整文档，请看Documentation/kbuild/kconfig-language.txt。
+要查看配置文件的完整文档，请看 Documentation/kbuild/kconfig-language.txt。
 
 
 		第十一章：数据结构
@@ -489,11 +524,11 @@ config ADFS_FS_RW
 很多数据结构实际上有2级引用计数，它们通常有不同“类”的用户。子类计数器统计子类用
 户的数量，每当子类计数器减至零时，全局计数器减一。
 
-这种“多级引用计数”的例子可以在内存管理（“struct mm_struct”：mm_users和mm_count）
+这种“多级引用计数”的例子可以在内存管理（“struct mm_struct”：mm_users 和 mm_count）
 和文件系统（“struct super_block”：s_count和s_active）中找到。
 
 记住：如果另一个执行线索可以找到你的数据结构，但是这个数据结构没有引用计数器，这
-里几乎肯定是一个bug。
+里几乎肯定是一个 bug。
 
 
 		第十二章：宏，枚举和RTL
@@ -508,102 +543,128 @@ config ADFS_FS_RW
 
 一般的，如果能写成内联函数就不要写成像函数的宏。
 
-含有多个语句的宏应该被包含在一个do-while代码块里：
+含有多个语句的宏应该被包含在一个 do-while 代码块里：
 
-#define macrofun(a, b, c) 			\
-	do {					\
-		if (a == 5)			\
-			do_this(b, c);		\
-	} while (0)
+	#define macrofun(a, b, c)			\
+		do {					\
+			if (a == 5)			\
+				do_this(b, c);		\
+		} while (0)
 
 使用宏的时候应避免的事情：
 
 1) 影响控制流程的宏：
 
-#define FOO(x)					\
-	do {					\
-		if (blah(x) < 0)		\
-			return -EBUGGERED;	\
-	} while(0)
+	#define FOO(x)					\
+		do {					\
+			if (blah(x) < 0)		\
+				return -EBUGGERED;	\
+		} while (0)
 
 非常不好。它看起来像一个函数，不过却能导致“调用”它的函数退出；不要打乱读者大脑里
 的语法分析器。
 
 2) 依赖于一个固定名字的本地变量的宏：
 
-#define FOO(val) bar(index, val)
+	#define FOO(val) bar(index, val)
 
 可能看起来像是个不错的东西，不过它非常容易把读代码的人搞糊涂，而且容易导致看起来
 不相关的改动带来错误。
 
-3) 作为左值的带参数的宏： FOO(x) = y；如果有人把FOO变成一个内联函数的话，这种用
+3) 作为左值的带参数的宏： FOO(x) = y；如果有人把 FOO 变成一个内联函数的话，这种用
 法就会出错了。
 
 4) 忘记了优先级：使用表达式定义常量的宏必须将表达式置于一对小括号之内。带参数的
 宏也要注意此类问题。
 
-#define CONSTANT 0x4000
-#define CONSTEXP (CONSTANT | 3)
+	#define CONSTANT 0x4000
+	#define CONSTEXP (CONSTANT | 3)
+
+5) 在宏里定义类似函数的本地变量时命名冲突：
 
-cpp手册对宏的讲解很详细。Gcc internals手册也详细讲解了RTL（译注：register
+	#define FOO(x)				\
+	({					\
+		typeof(x) ret;			\
+		ret = calc_ret(x);		\
+		(ret);				\
+	})
+
+ret 是本地变量的通用名字 - __foo_ret 更不容易与一个已存在的变量冲突。
+
+cpp 手册对宏的讲解很详细。gcc internals 手册也详细讲解了 RTL（译注：register
 transfer language），内核里的汇编语言经常用到它。
 
 
 		第十三章：打印内核消息
 
 内核开发者应该是受过良好教育的。请一定注意内核信息的拼写，以给人以好的印象。不要
-用不规范的单词比如“dont”，而要用“do not”或者“don't”。保证这些信息简单、明了、无
-歧义。
+用不规范的单词比如 “dont”，而要用 “do not”或者 “don't”。保证这些信息简单、明了、
+无歧义。
 
 内核信息不必以句号（译注：英文句号，即点）结束。
 
-在小括号里打印数字(%d)没有任何价值，应该避免这样做。
+在小括号里打印数字 (%d) 没有任何价值，应该避免这样做。
 
-<linux/device.h>里有一些驱动模型诊断宏，你应该使用它们，以确保信息对应于正确的
-设备和驱动，并且被标记了正确的消息级别。这些宏有：dev_err(), dev_warn(),
-dev_info()等等。对于那些不和某个特定设备相关连的信息，<linux/kernel.h>定义了
-pr_debug()和pr_info()。
+<linux/device.h> 里有一些驱动模型诊断宏，你应该使用它们，以确保信息对应于正确的
+设备和驱动，并且被标记了正确的消息级别。这些宏有：dev_err()，dev_warn()，
+dev_info() 等等。对于那些不和某个特定设备相关连的信息，<linux/printk.h> 定义了
+pr_notice()，pr_info()，pr_warn()，pr_err() 和其他。
 
-写出好的调试信息可以是一个很大的挑战；当你写出来之后，这些信息在远程除错的时候
-就会成为极大的帮助。当DEBUG符号没有被定义的时候，这些信息不应该被编译进内核里
-（也就是说，默认地，它们不应该被包含在内）。如果你使用dev_dbg()或者pr_debug()，
-就能自动达到这个效果。很多子系统拥有Kconfig选项来启用-DDEBUG。还有一个相关的惯例
-是使用VERBOSE_DEBUG来添加dev_vdbg()消息到那些已经由DEBUG启用的消息之上。
+写出好的调试信息可以是一个很大的挑战；一旦你写出后，这些信息在远程除错时能提供极大
+的帮助。然而打印调试信息的处理方式同打印非调试信息不同。其他 pr_XXX() 函数能无条件地
+打印，pr_debug() 却不；默认情况下它不会被编译，除非定义了 DEBUG 或设定了
+CONFIG_DYNAMIC_DEBUG。实际这同样是为了 dev_dbg()，一个相关约定是在一个已经开启了
+DEBUG 时，使用 VERBOSE_DEBUG 来添加 dev_vdbg()。
+
+许多子系统拥有 Kconfig 调试选项来开启 -DDEBUG 在对应的 Makefile 里面；在其他
+情况下，特殊文件使用 #define DEBUG。当一条调试信息需要被无条件打印时，例如，如果
+已经包含一个调试相关的 #ifdef 条件，printk(KERN_DEBUG ...) 就可被使用。
 
 
 		第十四章：分配内存
 
-内核提供了下面的一般用途的内存分配函数：kmalloc()，kzalloc()，kcalloc()和
-vmalloc()。请参考API文档以获取有关它们的详细信息。
+内核提供了下面的一般用途的内存分配函数：
+kmalloc()，kzalloc()，kmalloc_array()，kcalloc()，vmalloc() 和 vzalloc()。
+请参考 API 文档以获取有关它们的详细信息。
 
 传递结构体大小的首选形式是这样的：
 
 	p = kmalloc(sizeof(*p), ...);
 
-另外一种传递方式中，sizeof的操作数是结构体的名字，这样会降低可读性，并且可能会引
-入bug。有可能指针变量类型被改变时，而对应的传递给内存分配函数的sizeof的结果不变。
+另外一种传递方式中，sizeof 的操作数是结构体的名字，这样会降低可读性，并且可能会引
+入 bug。有可能指针变量类型被改变时，而对应的传递给内存分配函数的 sizeof 的结果不变。
 
-强制转换一个void指针返回值是多余的。C语言本身保证了从void指针到其他任何指针类型
+强制转换一个 void 指针返回值是多余的。C 语言本身保证了从 void 指针到其他任何指针类型
 的转换是没有问题的。
 
+分配一个数组的首选形式是这样的：
+
+	p = kmalloc_array(n, sizeof(...), ...);
+
+分配一个零长数组的首选形式是这样的：
+
+	p = kcalloc(n, sizeof(...), ...);
+
+两种形式检查分配大小 n * sizeof(...) 的溢出，如果溢出返回 NULL。
+
 
 		第十五章：内联弊病
 
-有一个常见的误解是内联函数是gcc提供的可以让代码运行更快的一个选项。虽然使用内联
+有一个常见的误解是内联函数是 gcc 提供的可以让代码运行更快的一个选项。虽然使用内联
 函数有时候是恰当的（比如作为一种替代宏的方式，请看第十二章），不过很多情况下不是
-这样。inline关键字的过度使用会使内核变大，从而使整个系统运行速度变慢。因为大内核
+这样。inline 关键字的过度使用会使内核变大，从而使整个系统运行速度变慢。因为大内核
 会占用更多的指令高速缓存（译注：一级缓存通常是指令缓存和数据缓存分开的）而且会导
-致pagecache的可用内存减少。想象一下，一次pagecache未命中就会导致一次磁盘寻址，将
-耗时5毫秒。5毫秒的时间内CPU能执行很多很多指令。
+致 pagecache 的可用内存减少。想象一下，一次pagecache未命中就会导致一次磁盘寻址，
+将耗时 5 毫秒。5 毫秒的时间内 CPU 能执行很多很多指令。
 
-一个基本的原则是如果一个函数有3行以上，就不要把它变成内联函数。这个原则的一个例
+一个基本的原则是如果一个函数有 3 行以上，就不要把它变成内联函数。这个原则的一个例
 外是，如果你知道某个参数是一个编译时常量，而且因为这个常量你确定编译器在编译时能
-优化掉你的函数的大部分代码，那仍然可以给它加上inline关键字。kmalloc()内联函数就
+优化掉你的函数的大部分代码，那仍然可以给它加上 inline 关键字。kmalloc() 内联函数就
 是一个很好的例子。
 
-人们经常主张给static的而且只用了一次的函数加上inline，如此不会有任何损失，因为没
-有什么好权衡的。虽然从技术上说这是正确的，但是实际上这种情况下即使不加inline gcc
-也可以自动使其内联。而且其他用户可能会要求移除inline，由此而来的争论会抵消inline
+人们经常主张给 static 的而且只用了一次的函数加上 inline，如此不会有任何损失，因为没
+有什么好权衡的。虽然从技术上说这是正确的，但是实际上这种情况下即使不加 inline gcc
+也可以自动使其内联。而且其他用户可能会要求移除 inline，由此而来的争论会抵消 inline
 自身的潜在价值，得不偿失。
 
 
@@ -613,37 +674,37 @@ vmalloc()。请参考API文档以获取有关它们的详细信息。
 的一个值可以表示为一个错误代码整数（-Exxx＝失败，0＝成功）或者一个“成功”布尔值（
 0＝失败，非0＝成功）。
 
-混合使用这两种表达方式是难于发现的bug的来源。如果C语言本身严格区分整形和布尔型变
-量，那么编译器就能够帮我们发现这些错误……不过C语言不区分。为了避免产生这种bug，请
+混合使用这两种表达方式是难于发现的 bug 的来源。如果 C 语言本身严格区分整形和布尔型变
+量，那么编译器就能够帮我们发现这些错误……不过 C 语言不区分。为了避免产生这种 bug，请
 遵循下面的惯例：
 
 	如果函数的名字是一个动作或者强制性的命令，那么这个函数应该返回错误代码整
 	数。如果是一个判断，那么函数应该返回一个“成功”布尔值。
 
-比如，“add work”是一个命令，所以add_work()函数在成功时返回0，在失败时返回-EBUSY。
-类似的，因为“PCI device present”是一个判断，所以pci_dev_present()函数在成功找到
-一个匹配的设备时应该返回1，如果找不到时应该返回0。
+比如，“add work” 是一个命令，所以 add_work() 函数在成功时返回 0，在失败时返回 -EBUSY。
+类似的，因为 “PCI device present” 是一个判断，所以 pci_dev_present() 函数在成功找到
+一个匹配的设备时应该返回 1，如果找不到时应该返回 0。
 
 所有导出（译注：EXPORT）的函数都必须遵守这个惯例，所有的公共函数也都应该如此。私
 有（static）函数不需要如此，但是我们也推荐这样做。
 
 返回值是实际计算结果而不是计算是否成功的标志的函数不受此惯例的限制。一般的，他们
 通过返回一些正常值范围之外的结果来表示出错。典型的例子是返回指针的函数，他们使用
-NULL或者ERR_PTR机制来报告错误。
+NULL 或者 ERR_PTR 机制来报告错误。
 
 
 		第十七章：不要重新发明内核宏
 
-头文件include/linux/kernel.h包含了一些宏，你应该使用它们，而不要自己写一些它们的
+头文件 include/linux/kernel.h 包含了一些宏，你应该使用它们，而不要自己写一些它们的
 变种。比如，如果你需要计算一个数组的长度，使用这个宏
 
-  #define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0]))
+	#define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0]))
 
 类似的，如果你要计算某结构体成员的大小，使用
 
-  #define FIELD_SIZEOF(t, f) (sizeof(((t*)0)->f))
+	#define FIELD_SIZEOF(t, f) (sizeof(((t*)0)->f))
 
-还有可以做严格的类型检查的min()和max()宏，如果你需要可以使用它们。你可以自己看看
+还有可以做严格的类型检查的 min() 和 max() 宏，如果你需要可以使用它们。你可以自己看看
 那个头文件里还定义了什么你可以拿来用的东西，如果有定义的话，你就不应在你的代码里
 自己重新定义。
 
@@ -653,42 +714,100 @@ NULL或者ERR_PTR机制来报告错误。
 有一些编辑器可以解释嵌入在源文件里的由一些特殊标记标明的配置信息。比如，emacs
 能够解释被标记成这样的行：
 
--*- mode: c -*-
+	-*- mode: c -*-
 
 或者这样的：
 
-/*
-Local Variables:
-compile-command: "gcc -DMAGIC_DEBUG_FLAG foo.c"
-End:
-*/
+	/*
+	Local Variables:
+	compile-command: "gcc -DMAGIC_DEBUG_FLAG foo.c"
+	End:
+	*/
 
-Vim能够解释这样的标记：
+Vim 能够解释这样的标记：
 
-/* vim:set sw=8 noet */
+	/* vim:set sw=8 noet */
 
 不要在源代码中包含任何这样的内容。每个人都有他自己的编辑器配置，你的源文件不应
 该覆盖别人的配置。这包括有关缩进和模式配置的标记。人们可以使用他们自己定制的模
 式，或者使用其他可以产生正确的缩进的巧妙方法。
 
 
+		第十九章：内联汇编
+
+在特定架构的代码中，你也许需要内联汇编来使用 CPU 接口和平台相关功能。在需要
+这么做时，不要犹豫。然而，当 C 可以完成工作时，不要无端地使用内联汇编。如果
+可能，你可以并且应该用 C 和硬件交互。
+
+考虑去写通用一点的内联汇编作为简明的辅助函数，而不是重复写下它们的细节。记住
+内联汇编可以使用 C 参数。
+
+大而特殊的汇编函数应该放在 .S 文件中，对应 C 的原型定义在 C 头文件中。汇编
+函数的 C 原型应该使用 “asmlinkage”。
+
+你可能需要将你的汇编语句标记为 volatile，来阻止 GCC 在没发现任何副作用后就
+移除了它。你不必总是这样做，虽然，这样可以限制不必要的优化。
+
+在写一个包含多条指令的单个内联汇编语句时，把每条指令用引号字符串分离，并写在
+单独一行，在每个字符串结尾，除了 \n\t 结尾之外，在汇编输出中适当地缩进下
+一条指令：
+
+	asm ("magic %reg1, #42\n\t"
+	     "more_magic %reg2, %reg3"
+	     : /* outputs */ : /* inputs */ : /* clobbers */);
+
+
+		第二十章：条件编译
+
+只要可能，就不要在 .c 文件里面使用预处理条件；这样做让代码更难阅读并且逻辑难以
+跟踪。替代方案是，在头文件定义函数在这些 .c 文件中使用这类的条件表达式，提供空
+操作的桩版本（译注：桩程序，是指用来替换一部分功能的程序段）在 #else 情况下，
+再从 .c 文件中无条件地调用这些函数。编译器会避免生成任何桩调用的代码，产生一致
+的结果，但逻辑将更加清晰。
+
+宁可编译整个函数，而不是部分函数或部分表达式。而不是在一个表达式添加 ifdef，
+解析部分或全部表达式到一个单独的辅助函数，并应用条件到该函数内。
+
+如果你有一个在特定配置中可能是未使用的函数或变量，编译器将警告它定义了但未使用，
+标记这个定义为 __maybe_unused 而不是将它包含在一个预处理条件中。（然而，如果
+一个函数或变量总是未使用的，就直接删除它。）
+
+在代码中，可能的情况下，使用 IS_ENABLED 宏来转化某个 Kconfig 标记为 C 的布尔
+表达式，并在正常的 C 条件中使用它：
+
+	if (IS_ENABLED(CONFIG_SOMETHING)) {
+		...
+	}
+
+编译器会无条件地做常数合并，就像使用 #ifdef 那样，包含或排除代码块，所以这不会
+带来任何运行时开销。然而，这种方法依旧允许 C 编译器查看块内的代码，并检查它的正确
+性（语法，类型，符号引用，等等）。因此，如果条件不满足，代码块内的引用符号将不存在，
+你必须继续使用 #ifdef。
+
+在任何有意义的 #if 或 #ifdef 块的末尾（超过几行），在 #endif 同一行的后面写下
+注释，指出该条件表达式被使用。例如：
+
+	#ifdef CONFIG_SOMETHING
+	...
+	#endif /* CONFIG_SOMETHING */
+
 
 		附录 I：参考
 
-The C Programming Language, 第二版, 作者Brian W. Kernighan和Denni
-M. Ritchie. Prentice Hall, Inc., 1988. ISBN 0-13-110362-8 (软皮),
-0-13-110370-9 (硬皮). URL: http://cm.bell-labs.com/cm/cs/cbook/
+The C Programming Language, 第二版
+作者：Brian W. Kernighan 和 Denni M. Ritchie.
+Prentice Hall, Inc., 1988.
+ISBN 0-13-110362-8 (软皮), 0-13-110370-9 (硬皮).
 
-The Practice of Programming 作者Brian W. Kernighan和Rob Pike.  Addison-Wesley,
-Inc., 1999.  ISBN 0-201-61586-X.  URL: http://cm.bell-labs.com/cm/cs/tpop/
+The Practice of Programming
+作者：Brian W. Kernighan 和 Rob Pike.
+Addison-Wesley, Inc., 1999.
+ISBN 0-201-61586-X.
 
-cpp，gcc，gcc internals和indent的GNU手册——和K&R及本文相符合的部分，全部可以在
-http://www.gnu.org/manual/找到
+GNU 手册 - 遵循 K&R 标准和此文本 - cpp, gcc, gcc internals and indent,
+都可以从 http://www.gnu.org/manual/ 找到
 
 WG14是C语言的国际标准化工作组，URL: http://www.open-std.org/JTC1/SC22/WG14/
 
-Kernel CodingStyle，作者greg@kroah.com发表于OLS 2002：
+Kernel CodingStyle，作者 greg@kroah.com 发表于OLS 2002：
 http://www.kroah.com/linux/talks/ols_2002_kernel_codingstyle_talk/html/
-
---
-最后更新于2007年7月13日。

MAINTAINERS

@@ -4104,6 +4104,21 @@ F:	drivers/gpu/drm/vc4/
 F:	include/uapi/drm/vc4_drm.h
 F:	Documentation/devicetree/bindings/display/brcm,bcm-vc4.txt
 
+DRM DRIVERS FOR TI OMAP
+M:	Tomi Valkeinen <tomi.valkeinen@ti.com>
+L:	dri-devel@lists.freedesktop.org
+S:	Maintained
+F:	drivers/gpu/drm/omapdrm/
+F:	Documentation/devicetree/bindings/display/ti/
+
+DRM DRIVERS FOR TI LCDC
+M:	Jyri Sarha <jsarha@ti.com>
+R:	Tomi Valkeinen <tomi.valkeinen@ti.com>
+L:	dri-devel@lists.freedesktop.org
+S:	Maintained
+F:	drivers/gpu/drm/tilcdc/
+F:	Documentation/devicetree/bindings/display/tilcdc/
+
 DSBR100 USB FM RADIO DRIVER
 M:	Alexey Klimov <klimov.linux@gmail.com>
 L:	linux-media@vger.kernel.org
@@ -7992,6 +8007,7 @@ Q:	http://patchwork.ozlabs.org/project/netdev/list/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/davem/net.git
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next.git
 S:	Odd Fixes
+F:	Documentation/devicetree/bindings/net/
 F:	drivers/net/
 F:	include/linux/if_*
 F:	include/linux/netdevice.h
@@ -8947,6 +8963,7 @@ M:	Linus Walleij <linus.walleij@linaro.org>
 L:	linux-gpio@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl.git
 S:	Maintained
+F:	Documentation/devicetree/bindings/pinctrl/
 F:	drivers/pinctrl/
 F:	include/linux/pinctrl/
 

Makefile

@@ -1,7 +1,7 @@
 VERSION = 4
 PATCHLEVEL = 7
 SUBLEVEL = 0
-EXTRAVERSION = -rc1
+EXTRAVERSION = -rc2
 NAME = Psychotic Stoned Sheep
 
 # *DOCUMENTATION*
@@ -1412,8 +1412,11 @@ $(help-board-dirs): help-%:
 
 # Documentation targets
 # ---------------------------------------------------------------------------
-%docs: scripts_basic FORCE
+DOC_TARGETS := xmldocs sgmldocs psdocs pdfdocs htmldocs mandocs installmandocs epubdocs cleandocs
+PHONY += $(DOC_TARGETS)
+$(DOC_TARGETS): scripts_basic FORCE
 	$(Q)$(MAKE) $(build)=scripts build_docproc build_check-lc_ctype
+	$(Q)$(MAKE) $(build)=Documentation -f $(srctree)/Documentation/Makefile.sphinx $@
 	$(Q)$(MAKE) $(build)=Documentation/DocBook $@
 
 else # KBUILD_EXTMOD

arch/arc/boot/dts/nsimosci.dts

@@ -20,7 +20,7 @@
 		/* this is for console on PGU */
 		/* bootargs = "console=tty0 consoleblank=0"; */
 		/* this is for console on serial */
-		bootargs = "earlycon=uart8250,mmio32,0xf0000000,115200n8 console=tty0 console=ttyS0,115200n8 consoleblank=0 debug";
+		bootargs = "earlycon=uart8250,mmio32,0xf0000000,115200n8 console=tty0 console=ttyS0,115200n8 consoleblank=0 debug video=640x480-24";
 	};
 
 	aliases {
@@ -58,9 +58,17 @@
 			no-loopback-test = <1>;
 		};
 
-		pgu0: pgu@f9000000 {
-			compatible = "snps,arcpgufb";
+		pguclk: pguclk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <25175000>;
+		};
+
+		pgu@f9000000 {
+			compatible = "snps,arcpgu";
 			reg = <0xf9000000 0x400>;
+			clocks = <&pguclk>;
+			clock-names = "pxlclk";
 		};
 
 		ps2: ps2@f9001000 {

arch/arc/boot/dts/nsimosci_hs.dts

@@ -20,7 +20,7 @@
 		/* this is for console on PGU */
 		/* bootargs = "console=tty0 consoleblank=0"; */
 		/* this is for console on serial */
-		bootargs = "earlycon=uart8250,mmio32,0xf0000000,115200n8 console=tty0 console=ttyS0,115200n8 consoleblank=0 debug";
+		bootargs = "earlycon=uart8250,mmio32,0xf0000000,115200n8 console=tty0 console=ttyS0,115200n8 consoleblank=0 debug video=640x480-24";
 	};
 
 	aliases {
@@ -58,9 +58,17 @@
 			no-loopback-test = <1>;
 		};
 
-		pgu0: pgu@f9000000 {
-			compatible = "snps,arcpgufb";
+		pguclk: pguclk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <25175000>;
+		};
+
+		pgu@f9000000 {
+			compatible = "snps,arcpgu";
 			reg = <0xf9000000 0x400>;
+			clocks = <&pguclk>;
+			clock-names = "pxlclk";
 		};
 
 		ps2: ps2@f9001000 {

arch/arc/boot/dts/nsimosci_hs_idu.dts

@@ -18,7 +18,7 @@
 
 	chosen {
 		/* this is for console on serial */
-		bootargs = "earlycon=uart8250,mmio32,0xf0000000,115200n8 console=tty0 console=ttyS0,115200n8 consoleblan=0 debug";
+		bootargs = "earlycon=uart8250,mmio32,0xf0000000,115200n8 console=tty0 console=ttyS0,115200n8 consoleblan=0 debug video=640x480-24";
 	};
 
 	aliases {
@@ -77,9 +77,17 @@
 			no-loopback-test = <1>;
 		};
 
-		pgu0: pgu@f9000000 {
-			compatible = "snps,arcpgufb";
+		pguclk: pguclk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <25175000>;
+		};
+
+		pgu@f9000000 {
+			compatible = "snps,arcpgu";
 			reg = <0xf9000000 0x400>;
+			clocks = <&pguclk>;
+			clock-names = "pxlclk";
 		};
 
 		ps2: ps2@f9001000 {

arch/arc/boot/dts/vdk_axs10x_mb.dtsi

@@ -23,6 +23,11 @@
 				#clock-cells = <0>;
 			};
 
+			pguclk: pguclk {
+				#clock-cells = <0>;
+				compatible = "fixed-clock";
+				clock-frequency = <25175000>;
+			};
 		};
 
 		ethernet@0x18000 {
@@ -75,11 +80,11 @@
 		};
 
 /* PGU output directly sent to virtual LCD screen; hdmi controller not modelled */
-		pgu@0x17000 {
-			compatible = "snps,arcpgufb";
+		pgu@17000 {
+			compatible = "snps,arcpgu";
 			reg = <0x17000 0x400>;
-			clock-frequency = <51000000>; /* PGU'clock is initated in init function */
-			/* interrupts = <5>;   PGU interrupts not used, this vector is used for ps2 below */
+			clocks = <&pguclk>;
+			clock-names = "pxlclk";
 		};
 
 /* VDK has additional ps2 keyboard/mouse interface integrated in LCD screen model */

arch/arc/boot/dts/vdk_hs38_smp.dts

@@ -16,6 +16,6 @@
 	compatible = "snps,axs103";
 
 	chosen {
-		bootargs = "earlycon=uart8250,mmio32,0xe0022000,115200n8 console=tty0 console=ttyS3,115200n8 consoleblank=0";
+		bootargs = "earlycon=uart8250,mmio32,0xe0022000,115200n8 console=tty0 console=ttyS3,115200n8 consoleblank=0 video=640x480-24";
 	};
 };

arch/arc/configs/nsimosci_defconfig

@@ -58,7 +58,8 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=1
 CONFIG_SERIAL_OF_PLATFORM=y
 # CONFIG_HW_RANDOM is not set
 # CONFIG_HWMON is not set
-CONFIG_FB=y
+CONFIG_DRM=y
+CONFIG_DRM_ARCPGU=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_LOGO=y
 # CONFIG_HID is not set

arch/arc/configs/nsimosci_hs_defconfig

@@ -57,7 +57,8 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=1
 CONFIG_SERIAL_OF_PLATFORM=y
 # CONFIG_HW_RANDOM is not set
 # CONFIG_HWMON is not set
-CONFIG_FB=y
+CONFIG_DRM=y
+CONFIG_DRM_ARCPGU=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_LOGO=y
 # CONFIG_HID is not set

arch/arc/configs/nsimosci_hs_smp_defconfig

@@ -70,7 +70,8 @@ CONFIG_SERIAL_8250_DW=y
 CONFIG_SERIAL_OF_PLATFORM=y
 # CONFIG_HW_RANDOM is not set
 # CONFIG_HWMON is not set
-CONFIG_FB=y
+CONFIG_DRM=y
+CONFIG_DRM_ARCPGU=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_LOGO=y
 # CONFIG_HID is not set

arch/arc/configs/vdk_hs38_smp_defconfig

@@ -63,12 +63,9 @@ CONFIG_SERIAL_8250_DW=y
 CONFIG_SERIAL_OF_PLATFORM=y
 # CONFIG_HW_RANDOM is not set
 # CONFIG_HWMON is not set
-CONFIG_FB=y
-CONFIG_ARCPGU_RGB888=y
-CONFIG_ARCPGU_DISPTYPE=0
-# CONFIG_VGA_CONSOLE is not set
+CONFIG_DRM=y
+CONFIG_DRM_ARCPGU=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
 CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_MONO is not set
 # CONFIG_LOGO_LINUX_VGA16 is not set

arch/arm/kernel/ptrace.c

@@ -733,8 +733,8 @@ static int vfp_set(struct task_struct *target,
 	if (ret)
 		return ret;
 
-	vfp_flush_hwstate(thread);
 	thread->vfpstate.hard = new_vfp;
+	vfp_flush_hwstate(thread);
 
 	return 0;
 }

arch/arm/mach-omap2/board-ldp.c

@@ -39,7 +39,7 @@
 #include "gpmc.h"
 #include "gpmc-smsc911x.h"
 
-#include <video/omapdss.h>
+#include <linux/platform_data/omapdss.h>
 #include <video/omap-panel-data.h>
 
 #include "board-flash.h"
@@ -47,6 +47,7 @@
 #include "hsmmc.h"
 #include "control.h"
 #include "common-board-devices.h"
+#include "display.h"
 
 #define LDP_SMSC911X_CS		1
 #define LDP_SMSC911X_GPIO	152

arch/arm/mach-omap2/board-rx51-video.c

@@ -15,13 +15,14 @@
 #include <linux/spi/spi.h>
 #include <linux/mm.h>
 #include <asm/mach-types.h>
-#include <video/omapdss.h>
+#include <linux/platform_data/omapdss.h>
 #include <video/omap-panel-data.h>
 
 #include <linux/platform_data/spi-omap2-mcspi.h>
 
 #include "soc.h"
 #include "board-rx51.h"
+#include "display.h"
 
 #include "mux.h"
 
@@ -32,7 +33,6 @@
 static struct connector_atv_platform_data rx51_tv_pdata = {
 	.name = "tv",
 	.source = "venc.0",
-	.connector_type = OMAP_DSS_VENC_TYPE_COMPOSITE,
 	.invert_polarity = false,
 };
 

arch/arm/mach-omap2/display.c

@@ -29,7 +29,7 @@
 #include <linux/mfd/syscon.h>
 #include <linux/regmap.h>
 
-#include <video/omapdss.h>
+#include <linux/platform_data/omapdss.h>
 #include "omap_hwmod.h"
 #include "omap_device.h"
 #include "omap-pm.h"

arch/arm/mach-omap2/display.h

@@ -33,4 +33,9 @@ int omap_init_vout(void);
 
 struct device_node * __init omapdss_find_dss_of_node(void);
 
+struct omap_dss_board_info;
+
+/* Init with the board info */
+int omap_display_init(struct omap_dss_board_info *board_data);
+
 #endif

arch/arm/mach-omap2/dss-common.c

@@ -27,7 +27,7 @@
 #include <linux/gpio.h>
 #include <linux/platform_device.h>
 
-#include <video/omapdss.h>
+#include <linux/platform_data/omapdss.h>
 #include <video/omap-panel-data.h>
 
 #include "soc.h"

arch/arm64/Kconfig

@@ -113,6 +113,18 @@ config ARCH_PHYS_ADDR_T_64BIT
 config MMU
 	def_bool y
 
+config ARM64_PAGE_SHIFT
+	int
+	default 16 if ARM64_64K_PAGES
+	default 14 if ARM64_16K_PAGES
+	default 12
+
+config ARM64_CONT_SHIFT
+	int
+	default 5 if ARM64_64K_PAGES
+	default 7 if ARM64_16K_PAGES
+	default 4
+
 config ARCH_MMAP_RND_BITS_MIN
        default 14 if ARM64_64K_PAGES
        default 16 if ARM64_16K_PAGES
@@ -426,6 +438,15 @@ config CAVIUM_ERRATUM_22375
 
 	  If unsure, say Y.
 
+config CAVIUM_ERRATUM_23144
+	bool "Cavium erratum 23144: ITS SYNC hang on dual socket system"
+	depends on NUMA
+	default y
+	help
+	  ITS SYNC command hang for cross node io and collections/cpu mapping.
+
+	  If unsure, say Y.
+
 config CAVIUM_ERRATUM_23154
 	bool "Cavium erratum 23154: Access to ICC_IAR1_EL1 is not sync'ed"
 	default y

arch/arm64/Kconfig.debug

@@ -12,7 +12,8 @@ config ARM64_PTDUMP
 	  who are working in architecture specific areas of the kernel.
 	  It is probably not a good idea to enable this feature in a production
 	  kernel.
-	  If in doubt, say "N"
+
+	  If in doubt, say N.
 
 config PID_IN_CONTEXTIDR
 	bool "Write the current PID to the CONTEXTIDR register"
@@ -38,15 +39,15 @@ config ARM64_RANDOMIZE_TEXT_OFFSET
 	  value.
 
 config DEBUG_SET_MODULE_RONX
-        bool "Set loadable kernel module data as NX and text as RO"
-        depends on MODULES
-        help
-          This option helps catch unintended modifications to loadable
-          kernel module's text and read-only data. It also prevents execution
-          of module data. Such protection may interfere with run-time code
-          patching and dynamic kernel tracing - and they might also protect
-          against certain classes of kernel exploits.
-          If in doubt, say "N".
+	bool "Set loadable kernel module data as NX and text as RO"
+	depends on MODULES
+	default y
+	help
+	  Is this is set, kernel module text and rodata will be made read-only.
+	  This is to help catch accidental or malicious attempts to change the
+	  kernel's executable code.
+
+	  If in doubt, say Y.
 
 config DEBUG_RODATA
 	bool "Make kernel text and rodata read-only"
@@ -56,7 +57,7 @@ config DEBUG_RODATA
 	  is to help catch accidental or malicious attempts to change the
 	  kernel's executable code.
 
-	  If in doubt, say Y
+	  If in doubt, say Y.
 
 config DEBUG_ALIGN_RODATA
 	depends on DEBUG_RODATA
@@ -69,7 +70,7 @@ config DEBUG_ALIGN_RODATA
 	  alignment and potentially wasted space. Turn on this option if
 	  performance is more important than memory pressure.
 
-	  If in doubt, say N
+	  If in doubt, say N.
 
 source "drivers/hwtracing/coresight/Kconfig"
 

arch/arm64/Makefile

@@ -60,7 +60,9 @@ head-y		:= arch/arm64/kernel/head.o
 
 # The byte offset of the kernel image in RAM from the start of RAM.
 ifeq ($(CONFIG_ARM64_RANDOMIZE_TEXT_OFFSET), y)
-TEXT_OFFSET := $(shell awk 'BEGIN {srand(); printf "0x%03x000\n", int(512 * rand())}')
+TEXT_OFFSET := $(shell awk "BEGIN {srand(); printf \"0x%06x\n\", \
+		 int(2 * 1024 * 1024 / (2 ^ $(CONFIG_ARM64_PAGE_SHIFT)) * \
+		 rand()) * (2 ^ $(CONFIG_ARM64_PAGE_SHIFT))}")
 else
 TEXT_OFFSET := 0x00080000
 endif

arch/arm64/include/asm/elf.h

@@ -160,14 +160,14 @@ extern int arch_setup_additional_pages(struct linux_binprm *bprm,
 #define STACK_RND_MASK			(0x3ffff >> (PAGE_SHIFT - 12))
 #endif
 
-#ifdef CONFIG_COMPAT
-
 #ifdef __AARCH64EB__
 #define COMPAT_ELF_PLATFORM		("v8b")
 #else
 #define COMPAT_ELF_PLATFORM		("v8l")
 #endif
 
+#ifdef CONFIG_COMPAT
+
 #define COMPAT_ELF_ET_DYN_BASE		(2 * TASK_SIZE_32 / 3)
 
 /* AArch32 registers. */

arch/arm64/include/asm/memory.h

@@ -55,8 +55,9 @@
 #define VMEMMAP_SIZE (UL(1) << (VA_BITS - PAGE_SHIFT - 1 + STRUCT_PAGE_MAX_SHIFT))
 
 /*
- * PAGE_OFFSET - the virtual address of the start of the kernel image (top
+ * PAGE_OFFSET - the virtual address of the start of the linear map (top
  *		 (VA_BITS - 1))
+ * KIMAGE_VADDR - the virtual address of the start of the kernel image
  * VA_BITS - the maximum number of bits for virtual addresses.
  * VA_START - the first kernel virtual address.
  * TASK_SIZE - the maximum size of a user space task.

arch/arm64/include/asm/page.h

@@ -23,16 +23,8 @@
 
 /* PAGE_SHIFT determines the page size */
 /* CONT_SHIFT determines the number of pages which can be tracked together  */
-#ifdef CONFIG_ARM64_64K_PAGES
-#define PAGE_SHIFT		16
-#define CONT_SHIFT		5
-#elif defined(CONFIG_ARM64_16K_PAGES)
-#define PAGE_SHIFT		14
-#define CONT_SHIFT		7
-#else
-#define PAGE_SHIFT		12
-#define CONT_SHIFT		4
-#endif
+#define PAGE_SHIFT		CONFIG_ARM64_PAGE_SHIFT
+#define CONT_SHIFT		CONFIG_ARM64_CONT_SHIFT
 #define PAGE_SIZE		(_AC(1, UL) << PAGE_SHIFT)
 #define PAGE_MASK		(~(PAGE_SIZE-1))
 

arch/arm64/include/asm/uaccess.h

@@ -80,19 +80,6 @@ static inline void set_fs(mm_segment_t fs)
 
 #define segment_eq(a, b)	((a) == (b))
 
-/*
- * Return 1 if addr < current->addr_limit, 0 otherwise.
- */
-#define __addr_ok(addr)							\
-({									\
-	unsigned long flag;						\
-	asm("cmp %1, %0; cset %0, lo"					\
-		: "=&r" (flag)						\
-		: "r" (addr), "0" (current_thread_info()->addr_limit)	\
-		: "cc");						\
-	flag;								\
-})
-
 /*
  * Test whether a block of memory is a valid user space address.
  * Returns 1 if the range is valid, 0 otherwise.

arch/arm64/include/asm/unistd.h

@@ -44,7 +44,7 @@
 #define __ARM_NR_compat_cacheflush	(__ARM_NR_COMPAT_BASE+2)
 #define __ARM_NR_compat_set_tls		(__ARM_NR_COMPAT_BASE+5)
 
-#define __NR_compat_syscalls		390
+#define __NR_compat_syscalls		394
 #endif
 
 #define __ARCH_WANT_SYS_CLONE

arch/arm64/include/asm/unistd32.h

@@ -801,6 +801,14 @@ __SYSCALL(__NR_execveat, compat_sys_execveat)
 __SYSCALL(__NR_userfaultfd, sys_userfaultfd)
 #define __NR_membarrier 389
 __SYSCALL(__NR_membarrier, sys_membarrier)
+#define __NR_mlock2 390
+__SYSCALL(__NR_mlock2, sys_mlock2)
+#define __NR_copy_file_range 391
+__SYSCALL(__NR_copy_file_range, sys_copy_file_range)
+#define __NR_preadv2 392
+__SYSCALL(__NR_preadv2, compat_sys_preadv2)
+#define __NR_pwritev2 393
+__SYSCALL(__NR_pwritev2, compat_sys_pwritev2)
 
 /*
  * Please add new compat syscalls above this comment and update

arch/arm64/kernel/cpuinfo.c

@@ -22,6 +22,8 @@
 
 #include <linux/bitops.h>
 #include <linux/bug.h>
+#include <linux/compat.h>
+#include <linux/elf.h>
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/personality.h>
@@ -104,6 +106,7 @@ static const char *const compat_hwcap2_str[] = {
 static int c_show(struct seq_file *m, void *v)
 {
 	int i, j;
+	bool compat = personality(current->personality) == PER_LINUX32;
 
 	for_each_online_cpu(i) {
 		struct cpuinfo_arm64 *cpuinfo = &per_cpu(cpu_data, i);
@@ -115,6 +118,9 @@ static int c_show(struct seq_file *m, void *v)
 		 * "processor".  Give glibc what it expects.
 		 */
 		seq_printf(m, "processor\t: %d\n", i);
+		if (compat)
+			seq_printf(m, "model name\t: ARMv8 Processor rev %d (%s)\n",
+				   MIDR_REVISION(midr), COMPAT_ELF_PLATFORM);
 
 		seq_printf(m, "BogoMIPS\t: %lu.%02lu\n",
 			   loops_per_jiffy / (500000UL/HZ),
@@ -127,7 +133,7 @@ static int c_show(struct seq_file *m, void *v)
 		 * software which does already (at least for 32-bit).
 		 */
 		seq_puts(m, "Features\t:");
-		if (personality(current->personality) == PER_LINUX32) {
+		if (compat) {
 #ifdef CONFIG_COMPAT
 			for (j = 0; compat_hwcap_str[j]; j++)
 				if (compat_elf_hwcap & (1 << j))

arch/arm64/kernel/traps.c

@@ -477,8 +477,9 @@ asmlinkage void bad_mode(struct pt_regs *regs, int reason, unsigned int esr)
 	void __user *pc = (void __user *)instruction_pointer(regs);
 	console_verbose();
 
-	pr_crit("Bad mode in %s handler detected, code 0x%08x -- %s\n",
-		handler[reason], esr, esr_get_class_string(esr));
+	pr_crit("Bad mode in %s handler detected on CPU%d, code 0x%08x -- %s\n",
+		handler[reason], smp_processor_id(), esr,
+		esr_get_class_string(esr));
 	__show_regs(regs);
 
 	info.si_signo = SIGILL;

arch/arm64/kvm/hyp/vgic-v3-sr.c

@@ -169,7 +169,8 @@ void __hyp_text __vgic_v3_save_state(struct kvm_vcpu *vcpu)
 	 * Make sure stores to the GIC via the memory mapped interface
 	 * are now visible to the system register interface.
 	 */
-	dsb(st);
+	if (!cpu_if->vgic_sre)
+		dsb(st);
 
 	cpu_if->vgic_vmcr  = read_gicreg(ICH_VMCR_EL2);
 
@@ -190,12 +191,11 @@ void __hyp_text __vgic_v3_save_state(struct kvm_vcpu *vcpu)
 			if (!(vcpu->arch.vgic_cpu.live_lrs & (1UL << i)))
 				continue;
 
-			if (cpu_if->vgic_elrsr & (1 << i)) {
+			if (cpu_if->vgic_elrsr & (1 << i))
 				cpu_if->vgic_lr[i] &= ~ICH_LR_STATE;
-				continue;
-			}
+			else
+				cpu_if->vgic_lr[i] = __gic_v3_get_lr(i);
 
-			cpu_if->vgic_lr[i] = __gic_v3_get_lr(i);
 			__gic_v3_set_lr(0, i);
 		}
 
@@ -236,8 +236,12 @@ void __hyp_text __vgic_v3_save_state(struct kvm_vcpu *vcpu)
 
 	val = read_gicreg(ICC_SRE_EL2);
 	write_gicreg(val | ICC_SRE_EL2_ENABLE, ICC_SRE_EL2);
-	isb(); /* Make sure ENABLE is set at EL2 before setting SRE at EL1 */
-	write_gicreg(1, ICC_SRE_EL1);
+
+	if (!cpu_if->vgic_sre) {
+		/* Make sure ENABLE is set at EL2 before setting SRE at EL1 */
+		isb();
+		write_gicreg(1, ICC_SRE_EL1);
+	}
 }
 
 void __hyp_text __vgic_v3_restore_state(struct kvm_vcpu *vcpu)
@@ -256,8 +260,10 @@ void __hyp_text __vgic_v3_restore_state(struct kvm_vcpu *vcpu)
 	 * been actually programmed with the value we want before
 	 * starting to mess with the rest of the GIC.
 	 */
-	write_gicreg(cpu_if->vgic_sre, ICC_SRE_EL1);
-	isb();
+	if (!cpu_if->vgic_sre) {
+		write_gicreg(0, ICC_SRE_EL1);
+		isb();
+	}
 
 	val = read_gicreg(ICH_VTR_EL2);
 	max_lr_idx = vtr_to_max_lr_idx(val);
@@ -306,18 +312,18 @@ void __hyp_text __vgic_v3_restore_state(struct kvm_vcpu *vcpu)
 	 * (re)distributors. This ensure the guest will read the
 	 * correct values from the memory-mapped interface.
 	 */
-	isb();
-	dsb(sy);
+	if (!cpu_if->vgic_sre) {
+		isb();
+		dsb(sy);
+	}
 	vcpu->arch.vgic_cpu.live_lrs = live_lrs;
 
 	/*
 	 * Prevent the guest from touching the GIC system registers if
 	 * SRE isn't enabled for GICv3 emulation.
 	 */
-	if (!cpu_if->vgic_sre) {
-		write_gicreg(read_gicreg(ICC_SRE_EL2) & ~ICC_SRE_EL2_ENABLE,
-			     ICC_SRE_EL2);
-	}
+	write_gicreg(read_gicreg(ICC_SRE_EL2) & ~ICC_SRE_EL2_ENABLE,
+		     ICC_SRE_EL2);
 }
 
 void __hyp_text __vgic_v3_init_lrs(void)

arch/arm64/kvm/sys_regs.c

@@ -134,6 +134,17 @@ static bool access_gic_sgi(struct kvm_vcpu *vcpu,
 	return true;
 }
 
+static bool access_gic_sre(struct kvm_vcpu *vcpu,
+			   struct sys_reg_params *p,
+			   const struct sys_reg_desc *r)
+{
+	if (p->is_write)
+		return ignore_write(vcpu, p);
+
+	p->regval = vcpu->arch.vgic_cpu.vgic_v3.vgic_sre;
+	return true;
+}
+
 static bool trap_raz_wi(struct kvm_vcpu *vcpu,
 			struct sys_reg_params *p,
 			const struct sys_reg_desc *r)
@@ -958,7 +969,7 @@ static const struct sys_reg_desc sys_reg_descs[] = {
 	  access_gic_sgi },
 	/* ICC_SRE_EL1 */
 	{ Op0(0b11), Op1(0b000), CRn(0b1100), CRm(0b1100), Op2(0b101),
-	  trap_raz_wi },
+	  access_gic_sre },
 
 	/* CONTEXTIDR_EL1 */
 	{ Op0(0b11), Op1(0b000), CRn(0b1101), CRm(0b0000), Op2(0b001),

arch/arm64/mm/dump.c

@@ -150,6 +150,7 @@ static const struct prot_bits pte_bits[] = {
 
 struct pg_level {
 	const struct prot_bits *bits;
+	const char *name;
 	size_t num;
 	u64 mask;
 };
@@ -157,15 +158,19 @@ struct pg_level {
 static struct pg_level pg_level[] = {
 	{
 	}, { /* pgd */
+		.name	= "PGD",
 		.bits	= pte_bits,
 		.num	= ARRAY_SIZE(pte_bits),
 	}, { /* pud */
+		.name	= (CONFIG_PGTABLE_LEVELS > 3) ? "PUD" : "PGD",
 		.bits	= pte_bits,
 		.num	= ARRAY_SIZE(pte_bits),
 	}, { /* pmd */
+		.name	= (CONFIG_PGTABLE_LEVELS > 2) ? "PMD" : "PGD",
 		.bits	= pte_bits,
 		.num	= ARRAY_SIZE(pte_bits),
 	}, { /* pte */
+		.name	= "PTE",
 		.bits	= pte_bits,
 		.num	= ARRAY_SIZE(pte_bits),
 	},
@@ -214,7 +219,8 @@ static void note_page(struct pg_state *st, unsigned long addr, unsigned level,
 				delta >>= 10;
 				unit++;
 			}
-			seq_printf(st->seq, "%9lu%c", delta, *unit);
+			seq_printf(st->seq, "%9lu%c %s", delta, *unit,
+				   pg_level[st->level].name);
 			if (pg_level[st->level].bits)
 				dump_prot(st, pg_level[st->level].bits,
 					  pg_level[st->level].num);

arch/arm64/mm/hugetlbpage.c

@@ -306,6 +306,10 @@ static __init int setup_hugepagesz(char *opt)
 		hugetlb_add_hstate(PMD_SHIFT - PAGE_SHIFT);
 	} else if (ps == PUD_SIZE) {
 		hugetlb_add_hstate(PUD_SHIFT - PAGE_SHIFT);
+	} else if (ps == (PAGE_SIZE * CONT_PTES)) {
+		hugetlb_add_hstate(CONT_PTE_SHIFT);
+	} else if (ps == (PMD_SIZE * CONT_PMDS)) {
+		hugetlb_add_hstate((PMD_SHIFT + CONT_PMD_SHIFT) - PAGE_SHIFT);
 	} else {
 		hugetlb_bad_size();
 		pr_err("hugepagesz: Unsupported page size %lu K\n", ps >> 10);
@@ -314,3 +318,13 @@ static __init int setup_hugepagesz(char *opt)
 	return 1;
 }
 __setup("hugepagesz=", setup_hugepagesz);
+
+#ifdef CONFIG_ARM64_64K_PAGES
+static __init int add_default_hugepagesz(void)
+{
+	if (size_to_hstate(CONT_PTES * PAGE_SIZE) == NULL)
+		hugetlb_add_hstate(CONT_PMD_SHIFT);
+	return 0;
+}
+arch_initcall(add_default_hugepagesz);
+#endif

arch/parisc/include/asm/traps.h

@@ -8,6 +8,8 @@ struct pt_regs;
 void parisc_terminate(char *msg, struct pt_regs *regs,
 		int code, unsigned long offset) __noreturn __cold;
 
+void die_if_kernel(char *str, struct pt_regs *regs, long err);
+
 /* mm/fault.c */
 void do_page_fault(struct pt_regs *regs, unsigned long code,
 		unsigned long address);

arch/parisc/kernel/processor.c

@@ -324,8 +324,9 @@ int init_per_cpu(int cpunum)
 		per_cpu(cpu_data, cpunum).fp_rev = coproc_cfg.revision;
 		per_cpu(cpu_data, cpunum).fp_model = coproc_cfg.model;
 
-		printk(KERN_INFO  "FP[%d] enabled: Rev %ld Model %ld\n",
-			cpunum, coproc_cfg.revision, coproc_cfg.model);
+		if (cpunum == 0)
+			printk(KERN_INFO  "FP[%d] enabled: Rev %ld Model %ld\n",
+				cpunum, coproc_cfg.revision, coproc_cfg.model);
 
 		/*
 		** store status register to stack (hopefully aligned)

arch/parisc/kernel/time.c

@@ -309,11 +309,6 @@ void __init time_init(void)
 	clocks_calc_mult_shift(&cyc2ns_mul, &cyc2ns_shift, current_cr16_khz,
 				NSEC_PER_MSEC, 0);
 
-#if defined(CONFIG_HAVE_UNSTABLE_SCHED_CLOCK) && defined(CONFIG_64BIT)
-	/* At bootup only one 64bit CPU is online and cr16 is "stable" */
-	set_sched_clock_stable();
-#endif
-
 	start_cpu_itimer();	/* get CPU 0 started */
 
 	/* register at clocksource framework */

arch/parisc/kernel/unaligned.c

@@ -28,6 +28,7 @@
 #include <linux/ratelimit.h>
 #include <asm/uaccess.h>
 #include <asm/hardirq.h>
+#include <asm/traps.h>
 
 /* #define DEBUG_UNALIGNED 1 */
 
@@ -130,8 +131,6 @@
 
 int unaligned_enabled __read_mostly = 1;
 
-void die_if_kernel (char *str, struct pt_regs *regs, long err);
-
 static int emulate_ldh(struct pt_regs *regs, int toreg)
 {
 	unsigned long saddr = regs->ior;
@@ -666,7 +665,7 @@ void handle_unaligned(struct pt_regs *regs)
 		break;
 	}
 
-	if (modify && R1(regs->iir))
+	if (ret == 0 && modify && R1(regs->iir))
 		regs->gr[R1(regs->iir)] = newbase;
 
 
@@ -677,6 +676,14 @@ void handle_unaligned(struct pt_regs *regs)
 
 	if (ret)
 	{
+		/*
+		 * The unaligned handler failed.
+		 * If we were called by __get_user() or __put_user() jump
+		 * to it's exception fixup handler instead of crashing.
+		 */
+		if (!user_mode(regs) && fixup_exception(regs))
+			return;
+
 		printk(KERN_CRIT "Unaligned handler failed, ret = %d\n", ret);
 		die_if_kernel("Unaligned data reference", regs, 28);
 

arch/parisc/kernel/unwind.c

@@ -75,7 +75,10 @@ find_unwind_entry(unsigned long addr)
 	if (addr >= kernel_unwind_table.start && 
 	    addr <= kernel_unwind_table.end)
 		e = find_unwind_entry_in_table(&kernel_unwind_table, addr);
-	else 
+	else {
+		unsigned long flags;
+
+		spin_lock_irqsave(&unwind_lock, flags);
 		list_for_each_entry(table, &unwind_tables, list) {
 			if (addr >= table->start && 
 			    addr <= table->end)
@@ -86,6 +89,8 @@ find_unwind_entry(unsigned long addr)
 				break;
 			}
 		}
+		spin_unlock_irqrestore(&unwind_lock, flags);
+	}
 
 	return e;
 }
@@ -303,18 +308,16 @@ static void unwind_frame_regs(struct unwind_frame_info *info)
 
 			insn = *(unsigned int *)npc;
 
-			if ((insn & 0xffffc000) == 0x37de0000 ||
-			    (insn & 0xffe00000) == 0x6fc00000) {
+			if ((insn & 0xffffc001) == 0x37de0000 ||
+			    (insn & 0xffe00001) == 0x6fc00000) {
 				/* ldo X(sp), sp, or stwm X,D(sp) */
-				frame_size += (insn & 0x1 ? -1 << 13 : 0) | 
-					((insn & 0x3fff) >> 1);
+				frame_size += (insn & 0x3fff) >> 1;
 				dbg("analyzing func @ %lx, insn=%08x @ "
 				    "%lx, frame_size = %ld\n", info->ip,
 				    insn, npc, frame_size);
-			} else if ((insn & 0xffe00008) == 0x73c00008) {
+			} else if ((insn & 0xffe00009) == 0x73c00008) {
 				/* std,ma X,D(sp) */
-				frame_size += (insn & 0x1 ? -1 << 13 : 0) | 
-					(((insn >> 4) & 0x3ff) << 3);
+				frame_size += ((insn >> 4) & 0x3ff) << 3;
 				dbg("analyzing func @ %lx, insn=%08x @ "
 				    "%lx, frame_size = %ld\n", info->ip,
 				    insn, npc, frame_size);
@@ -333,6 +336,9 @@ static void unwind_frame_regs(struct unwind_frame_info *info)
 			}
 		}
 
+		if (frame_size > e->Total_frame_size << 3)
+			frame_size = e->Total_frame_size << 3;
+
 		if (!unwind_special(info, e->region_start, frame_size)) {
 			info->prev_sp = info->sp - frame_size;
 			if (e->Millicode)

arch/powerpc/include/asm/reg.h

@@ -717,7 +717,7 @@
 #define   MMCR0_FCWAIT	0x00000002UL /* freeze counter in WAIT state */
 #define   MMCR0_FCHV	0x00000001UL /* freeze conditions in hypervisor mode */
 #define SPRN_MMCR1	798
-#define SPRN_MMCR2	769
+#define SPRN_MMCR2	785
 #define SPRN_MMCRA	0x312
 #define   MMCRA_SDSYNC	0x80000000UL /* SDAR synced with SIAR */
 #define   MMCRA_SDAR_DCACHE_MISS 0x40000000UL
@@ -754,13 +754,13 @@
 #define SPRN_PMC6	792
 #define SPRN_PMC7	793
 #define SPRN_PMC8	794
-#define SPRN_SIAR	780
-#define SPRN_SDAR	781
 #define SPRN_SIER	784
 #define   SIER_SIPR		0x2000000	/* Sampled MSR_PR */
 #define   SIER_SIHV		0x1000000	/* Sampled MSR_HV */
 #define   SIER_SIAR_VALID	0x0400000	/* SIAR contents valid */
 #define   SIER_SDAR_VALID	0x0200000	/* SDAR contents valid */
+#define SPRN_SIAR	796
+#define SPRN_SDAR	797
 #define SPRN_TACR	888
 #define SPRN_TCSCR	889
 #define SPRN_CSIGR	890

arch/powerpc/kernel/prom_init.c

@@ -656,6 +656,7 @@ unsigned char ibm_architecture_vec[] = {
 	W(0xffff0000), W(0x003e0000),	/* POWER6 */
 	W(0xffff0000), W(0x003f0000),	/* POWER7 */
 	W(0xffff0000), W(0x004b0000),	/* POWER8E */
+	W(0xffff0000), W(0x004c0000),   /* POWER8NVL */
 	W(0xffff0000), W(0x004d0000),	/* POWER8 */
 	W(0xffffffff), W(0x0f000004),	/* all 2.07-compliant */
 	W(0xffffffff), W(0x0f000003),	/* all 2.06-compliant */

arch/powerpc/mm/hash_utils_64.c

@@ -159,6 +159,19 @@ static struct mmu_psize_def mmu_psize_defaults_gp[] = {
 	},
 };
 
+/*
+ * 'R' and 'C' update notes:
+ *  - Under pHyp or KVM, the updatepp path will not set C, thus it *will*
+ *     create writeable HPTEs without C set, because the hcall H_PROTECT
+ *     that we use in that case will not update C
+ *  - The above is however not a problem, because we also don't do that
+ *     fancy "no flush" variant of eviction and we use H_REMOVE which will
+ *     do the right thing and thus we don't have the race I described earlier
+ *
+ *    - Under bare metal,  we do have the race, so we need R and C set
+ *    - We make sure R is always set and never lost
+ *    - C is _PAGE_DIRTY, and *should* always be set for a writeable mapping
+ */
 unsigned long htab_convert_pte_flags(unsigned long pteflags)
 {
 	unsigned long rflags = 0;
@@ -186,9 +199,14 @@ unsigned long htab_convert_pte_flags(unsigned long pteflags)
 			rflags |= 0x1;
 	}
 	/*
-	 * Always add "C" bit for perf. Memory coherence is always enabled
+	 * We can't allow hardware to update hpte bits. Hence always
+	 * set 'R' bit and set 'C' if it is a write fault
+	 * Memory coherence is always enabled
 	 */
-	rflags |=  HPTE_R_C | HPTE_R_M;
+	rflags |=  HPTE_R_R | HPTE_R_M;
+
+	if (pteflags & _PAGE_DIRTY)
+		rflags |= HPTE_R_C;
 	/*
 	 * Add in WIG bits
 	 */

arch/powerpc/mm/pgtable-book3s64.c

@@ -33,10 +33,7 @@ int pmdp_set_access_flags(struct vm_area_struct *vma, unsigned long address,
 	changed = !pmd_same(*(pmdp), entry);
 	if (changed) {
 		__ptep_set_access_flags(pmdp_ptep(pmdp), pmd_pte(entry));
-		/*
-		 * Since we are not supporting SW TLB systems, we don't
-		 * have any thing similar to flush_tlb_page_nohash()
-		 */
+		flush_tlb_range(vma, address, address + HPAGE_PMD_SIZE);
 	}
 	return changed;
 }

arch/powerpc/mm/pgtable-radix.c

@@ -296,11 +296,6 @@ found:
 void __init radix__early_init_mmu(void)
 {
 	unsigned long lpcr;
-	/*
-	 * setup LPCR UPRT based on mmu_features
-	 */
-	lpcr = mfspr(SPRN_LPCR);
-	mtspr(SPRN_LPCR, lpcr | LPCR_UPRT);
 
 #ifdef CONFIG_PPC_64K_PAGES
 	/* PAGE_SIZE mappings */
@@ -343,8 +338,11 @@ void __init radix__early_init_mmu(void)
 	__pte_frag_size_shift = H_PTE_FRAG_SIZE_SHIFT;
 
 	radix_init_page_sizes();
-	if (!firmware_has_feature(FW_FEATURE_LPAR))
+	if (!firmware_has_feature(FW_FEATURE_LPAR)) {
+		lpcr = mfspr(SPRN_LPCR);
+		mtspr(SPRN_LPCR, lpcr | LPCR_UPRT);
 		radix_init_partition_table();
+	}
 
 	radix_init_pgtable();
 }
@@ -353,16 +351,15 @@ void radix__early_init_mmu_secondary(void)
 {
 	unsigned long lpcr;
 	/*
-	 * setup LPCR UPRT based on mmu_features
+	 * update partition table control register and UPRT
 	 */
-	lpcr = mfspr(SPRN_LPCR);
-	mtspr(SPRN_LPCR, lpcr | LPCR_UPRT);
-	/*
-	 * update partition table control register, 64 K size.
-	 */
-	if (!firmware_has_feature(FW_FEATURE_LPAR))
+	if (!firmware_has_feature(FW_FEATURE_LPAR)) {
+		lpcr = mfspr(SPRN_LPCR);
+		mtspr(SPRN_LPCR, lpcr | LPCR_UPRT);
+
 		mtspr(SPRN_PTCR,
 		      __pa(partition_tb) | (PATB_SIZE_SHIFT - 12));
+	}
 }
 
 void radix__setup_initial_memory_limit(phys_addr_t first_memblock_base,

arch/powerpc/platforms/pseries/eeh_pseries.c

@@ -53,7 +53,6 @@ static int ibm_read_slot_reset_state2;
 static int ibm_slot_error_detail;
 static int ibm_get_config_addr_info;
 static int ibm_get_config_addr_info2;
-static int ibm_configure_bridge;
 static int ibm_configure_pe;
 
 /*
@@ -81,7 +80,14 @@ static int pseries_eeh_init(void)
 	ibm_get_config_addr_info2	= rtas_token("ibm,get-config-addr-info2");
 	ibm_get_config_addr_info	= rtas_token("ibm,get-config-addr-info");
 	ibm_configure_pe		= rtas_token("ibm,configure-pe");
-	ibm_configure_bridge		= rtas_token("ibm,configure-bridge");
+
+	/*
+	 * ibm,configure-pe and ibm,configure-bridge have the same semantics,
+	 * however ibm,configure-pe can be faster.  If we can't find
+	 * ibm,configure-pe then fall back to using ibm,configure-bridge.
+	 */
+	if (ibm_configure_pe == RTAS_UNKNOWN_SERVICE)
+		ibm_configure_pe 	= rtas_token("ibm,configure-bridge");
 
 	/*
 	 * Necessary sanity check. We needn't check "get-config-addr-info"
@@ -93,8 +99,7 @@ static int pseries_eeh_init(void)
 	    (ibm_read_slot_reset_state2 == RTAS_UNKNOWN_SERVICE &&
 	     ibm_read_slot_reset_state == RTAS_UNKNOWN_SERVICE)	||
 	    ibm_slot_error_detail == RTAS_UNKNOWN_SERVICE	||
-	    (ibm_configure_pe == RTAS_UNKNOWN_SERVICE		&&
-	     ibm_configure_bridge == RTAS_UNKNOWN_SERVICE)) {
+	    ibm_configure_pe == RTAS_UNKNOWN_SERVICE) {
 		pr_info("EEH functionality not supported\n");
 		return -EINVAL;
 	}
@@ -615,29 +620,41 @@ static int pseries_eeh_configure_bridge(struct eeh_pe *pe)
 {
 	int config_addr;
 	int ret;
+	/* Waiting 0.2s maximum before skipping configuration */
+	int max_wait = 200;
 
 	/* Figure out the PE address */
 	config_addr = pe->config_addr;
 	if (pe->addr)
 		config_addr = pe->addr;
 
-	/* Use new configure-pe function, if supported */
-	if (ibm_configure_pe != RTAS_UNKNOWN_SERVICE) {
+	while (max_wait > 0) {
 		ret = rtas_call(ibm_configure_pe, 3, 1, NULL,
 				config_addr, BUID_HI(pe->phb->buid),
 				BUID_LO(pe->phb->buid));
-	} else if (ibm_configure_bridge != RTAS_UNKNOWN_SERVICE) {
-		ret = rtas_call(ibm_configure_bridge, 3, 1, NULL,
-				config_addr, BUID_HI(pe->phb->buid),
-				BUID_LO(pe->phb->buid));
-	} else {
-		return -EFAULT;
-	}
 
-	if (ret)
-		pr_warn("%s: Unable to configure bridge PHB#%d-PE#%x (%d)\n",
-			__func__, pe->phb->global_number, pe->addr, ret);
+		if (!ret)
+			return ret;
+
+		/*
+		 * If RTAS returns a delay value that's above 100ms, cut it
+		 * down to 100ms in case firmware made a mistake.  For more
+		 * on how these delay values work see rtas_busy_delay_time
+		 */
+		if (ret > RTAS_EXTENDED_DELAY_MIN+2 &&
+		    ret <= RTAS_EXTENDED_DELAY_MAX)
+			ret = RTAS_EXTENDED_DELAY_MIN+2;
+
+		max_wait -= rtas_busy_delay_time(ret);
+
+		if (max_wait < 0)
+			break;
+
+		rtas_busy_delay(ret);
+	}
 
+	pr_warn("%s: Unable to configure bridge PHB#%d-PE#%x (%d)\n",
+		__func__, pe->phb->global_number, pe->addr, ret);
 	return ret;
 }
 

arch/s390/configs/default_defconfig

@@ -1,8 +1,7 @@
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
-CONFIG_FHANDLE=y
 CONFIG_AUDIT=y
-CONFIG_NO_HZ=y
+CONFIG_NO_HZ_IDLE=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_BSD_PROCESS_ACCT_V3=y
@@ -13,19 +12,19 @@ CONFIG_TASK_IO_ACCOUNTING=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_NUMA_BALANCING=y
-CONFIG_CGROUP_FREEZER=y
-CONFIG_CGROUP_PIDS=y
-CONFIG_CGROUP_DEVICE=y
-CONFIG_CPUSETS=y
-CONFIG_CGROUP_CPUACCT=y
 CONFIG_MEMCG=y
 CONFIG_MEMCG_SWAP=y
-CONFIG_MEMCG_KMEM=y
-CONFIG_CGROUP_HUGETLB=y
-CONFIG_CGROUP_PERF=y
+CONFIG_BLK_CGROUP=y
 CONFIG_CFS_BANDWIDTH=y
 CONFIG_RT_GROUP_SCHED=y
-CONFIG_BLK_CGROUP=y
+CONFIG_CGROUP_PIDS=y
+CONFIG_CGROUP_FREEZER=y
+CONFIG_CGROUP_HUGETLB=y
+CONFIG_CPUSETS=y
+CONFIG_CGROUP_DEVICE=y
+CONFIG_CGROUP_CPUACCT=y
+CONFIG_CGROUP_PERF=y
+CONFIG_CHECKPOINT_RESTORE=y
 CONFIG_NAMESPACES=y
 CONFIG_USER_NS=y
 CONFIG_SCHED_AUTOGROUP=y
@@ -55,7 +54,6 @@ CONFIG_UNIXWARE_DISKLABEL=y
 CONFIG_CFQ_GROUP_IOSCHED=y
 CONFIG_DEFAULT_DEADLINE=y
 CONFIG_LIVEPATCH=y
-CONFIG_MARCH_Z196=y
 CONFIG_TUNE_ZEC12=y
 CONFIG_NR_CPUS=256
 CONFIG_NUMA=y
@@ -65,6 +63,15 @@ CONFIG_MEMORY_HOTPLUG=y
 CONFIG_MEMORY_HOTREMOVE=y
 CONFIG_KSM=y
 CONFIG_TRANSPARENT_HUGEPAGE=y
+CONFIG_CLEANCACHE=y
+CONFIG_FRONTSWAP=y
+CONFIG_CMA=y
+CONFIG_MEM_SOFT_DIRTY=y
+CONFIG_ZPOOL=m
+CONFIG_ZBUD=m
+CONFIG_ZSMALLOC=m
+CONFIG_ZSMALLOC_STAT=y
+CONFIG_IDLE_PAGE_TRACKING=y
 CONFIG_PCI=y
 CONFIG_PCI_DEBUG=y
 CONFIG_HOTPLUG_PCI=y
@@ -452,6 +459,7 @@ CONFIG_HW_RANDOM_VIRTIO=m
 CONFIG_RAW_DRIVER=m
 CONFIG_HANGCHECK_TIMER=m
 CONFIG_TN3270_FS=y
+# CONFIG_HWMON is not set
 CONFIG_WATCHDOG=y
 CONFIG_WATCHDOG_NOWAYOUT=y
 CONFIG_SOFT_WATCHDOG=m
@@ -537,6 +545,8 @@ CONFIG_DLM=m
 CONFIG_PRINTK_TIME=y
 CONFIG_DYNAMIC_DEBUG=y
 CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_INFO_DWARF4=y
+CONFIG_GDB_SCRIPTS=y
 CONFIG_FRAME_WARN=1024
 CONFIG_READABLE_ASM=y
 CONFIG_UNUSED_SYMBOLS=y
@@ -555,13 +565,17 @@ CONFIG_SLUB_DEBUG_ON=y
 CONFIG_SLUB_STATS=y
 CONFIG_DEBUG_STACK_USAGE=y
 CONFIG_DEBUG_VM=y
+CONFIG_DEBUG_VM_VMACACHE=y
 CONFIG_DEBUG_VM_RB=y
+CONFIG_DEBUG_VM_PGFLAGS=y
 CONFIG_DEBUG_MEMORY_INIT=y
 CONFIG_MEMORY_NOTIFIER_ERROR_INJECT=m
 CONFIG_DEBUG_PER_CPU_MAPS=y
 CONFIG_DEBUG_SHIRQ=y
 CONFIG_DETECT_HUNG_TASK=y
+CONFIG_WQ_WATCHDOG=y
 CONFIG_PANIC_ON_OOPS=y
+CONFIG_DEBUG_TIMEKEEPING=y
 CONFIG_TIMER_STATS=y
 CONFIG_DEBUG_RT_MUTEXES=y
 CONFIG_DEBUG_WW_MUTEX_SLOWPATH=y
@@ -596,6 +610,8 @@ CONFIG_FTRACE_SYSCALLS=y
 CONFIG_STACK_TRACER=y
 CONFIG_BLK_DEV_IO_TRACE=y
 CONFIG_UPROBE_EVENT=y
+CONFIG_FUNCTION_PROFILER=y
+CONFIG_TRACE_ENUM_MAP_FILE=y
 CONFIG_LKDTM=m
 CONFIG_TEST_LIST_SORT=y
 CONFIG_KPROBES_SANITY_TEST=y
@@ -607,7 +623,6 @@ CONFIG_TEST_STRING_HELPERS=y
 CONFIG_TEST_KSTRTOX=y
 CONFIG_DMA_API_DEBUG=y
 CONFIG_TEST_BPF=m
-# CONFIG_STRICT_DEVMEM is not set
 CONFIG_S390_PTDUMP=y
 CONFIG_ENCRYPTED_KEYS=m
 CONFIG_SECURITY=y
@@ -651,7 +666,6 @@ CONFIG_CRYPTO_SEED=m
 CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_TEA=m
 CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_ZLIB=y
 CONFIG_CRYPTO_LZO=m
 CONFIG_CRYPTO_LZ4=m
 CONFIG_CRYPTO_LZ4HC=m
@@ -664,7 +678,7 @@ CONFIG_CRYPTO_SHA512_S390=m
 CONFIG_CRYPTO_DES_S390=m
 CONFIG_CRYPTO_AES_S390=m
 CONFIG_CRYPTO_GHASH_S390=m
-CONFIG_ASYMMETRIC_KEY_TYPE=m
+CONFIG_ASYMMETRIC_KEY_TYPE=y
 CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=m
 CONFIG_X509_CERTIFICATE_PARSER=m
 CONFIG_CRC7=m

arch/s390/configs/gcov_defconfig

@@ -1,8 +1,7 @@
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
-CONFIG_FHANDLE=y
 CONFIG_AUDIT=y
-CONFIG_NO_HZ=y
+CONFIG_NO_HZ_IDLE=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_BSD_PROCESS_ACCT_V3=y
@@ -13,17 +12,17 @@ CONFIG_TASK_IO_ACCOUNTING=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_NUMA_BALANCING=y
-CONFIG_CGROUP_FREEZER=y
-CONFIG_CGROUP_PIDS=y
-CONFIG_CGROUP_DEVICE=y
-CONFIG_CPUSETS=y
-CONFIG_CGROUP_CPUACCT=y
 CONFIG_MEMCG=y
 CONFIG_MEMCG_SWAP=y
-CONFIG_MEMCG_KMEM=y
+CONFIG_BLK_CGROUP=y
+CONFIG_CGROUP_PIDS=y
+CONFIG_CGROUP_FREEZER=y
 CONFIG_CGROUP_HUGETLB=y
+CONFIG_CPUSETS=y
+CONFIG_CGROUP_DEVICE=y
+CONFIG_CGROUP_CPUACCT=y
 CONFIG_CGROUP_PERF=y
-CONFIG_BLK_CGROUP=y
+CONFIG_CHECKPOINT_RESTORE=y
 CONFIG_NAMESPACES=y
 CONFIG_USER_NS=y
 CONFIG_SCHED_AUTOGROUP=y
@@ -53,7 +52,6 @@ CONFIG_SOLARIS_X86_PARTITION=y
 CONFIG_UNIXWARE_DISKLABEL=y
 CONFIG_CFQ_GROUP_IOSCHED=y
 CONFIG_DEFAULT_DEADLINE=y
-CONFIG_MARCH_Z196=y
 CONFIG_TUNE_ZEC12=y
 CONFIG_NR_CPUS=256
 CONFIG_NUMA=y
@@ -62,6 +60,14 @@ CONFIG_MEMORY_HOTPLUG=y
 CONFIG_MEMORY_HOTREMOVE=y
 CONFIG_KSM=y
 CONFIG_TRANSPARENT_HUGEPAGE=y
+CONFIG_CLEANCACHE=y
+CONFIG_FRONTSWAP=y
+CONFIG_CMA=y
+CONFIG_ZSWAP=y
+CONFIG_ZBUD=m
+CONFIG_ZSMALLOC=m
+CONFIG_ZSMALLOC_STAT=y
+CONFIG_IDLE_PAGE_TRACKING=y
 CONFIG_PCI=y
 CONFIG_HOTPLUG_PCI=y
 CONFIG_HOTPLUG_PCI_S390=y
@@ -530,6 +536,8 @@ CONFIG_NLS_UTF8=m
 CONFIG_DLM=m
 CONFIG_PRINTK_TIME=y
 CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_INFO_DWARF4=y
+CONFIG_GDB_SCRIPTS=y
 # CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_FRAME_WARN=1024
 CONFIG_UNUSED_SYMBOLS=y
@@ -547,13 +555,13 @@ CONFIG_LATENCYTOP=y
 CONFIG_DEBUG_STRICT_USER_COPY_CHECKS=y
 CONFIG_BLK_DEV_IO_TRACE=y
 # CONFIG_KPROBE_EVENT is not set
+CONFIG_TRACE_ENUM_MAP_FILE=y
 CONFIG_LKDTM=m
 CONFIG_RBTREE_TEST=m
 CONFIG_INTERVAL_TREE_TEST=m
 CONFIG_PERCPU_TEST=m
 CONFIG_ATOMIC64_SELFTEST=y
 CONFIG_TEST_BPF=m
-# CONFIG_STRICT_DEVMEM is not set
 CONFIG_S390_PTDUMP=y
 CONFIG_ENCRYPTED_KEYS=m
 CONFIG_SECURITY=y
@@ -597,8 +605,6 @@ CONFIG_CRYPTO_SEED=m
 CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_TEA=m
 CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_ZLIB=y
-CONFIG_CRYPTO_LZO=m
 CONFIG_CRYPTO_LZ4=m
 CONFIG_CRYPTO_LZ4HC=m
 CONFIG_CRYPTO_USER_API_HASH=m
@@ -610,7 +616,7 @@ CONFIG_CRYPTO_SHA512_S390=m
 CONFIG_CRYPTO_DES_S390=m
 CONFIG_CRYPTO_AES_S390=m
 CONFIG_CRYPTO_GHASH_S390=m
-CONFIG_ASYMMETRIC_KEY_TYPE=m
+CONFIG_ASYMMETRIC_KEY_TYPE=y
 CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=m
 CONFIG_X509_CERTIFICATE_PARSER=m
 CONFIG_CRC7=m

arch/s390/configs/performance_defconfig

@@ -1,8 +1,7 @@
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
-CONFIG_FHANDLE=y
 CONFIG_AUDIT=y
-CONFIG_NO_HZ=y
+CONFIG_NO_HZ_IDLE=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_BSD_PROCESS_ACCT_V3=y
@@ -14,17 +13,17 @@ CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_NUMA_BALANCING=y
 # CONFIG_NUMA_BALANCING_DEFAULT_ENABLED is not set
-CONFIG_CGROUP_FREEZER=y
-CONFIG_CGROUP_PIDS=y
-CONFIG_CGROUP_DEVICE=y
-CONFIG_CPUSETS=y
-CONFIG_CGROUP_CPUACCT=y
 CONFIG_MEMCG=y
 CONFIG_MEMCG_SWAP=y
-CONFIG_MEMCG_KMEM=y
+CONFIG_BLK_CGROUP=y
+CONFIG_CGROUP_PIDS=y
+CONFIG_CGROUP_FREEZER=y
 CONFIG_CGROUP_HUGETLB=y
+CONFIG_CPUSETS=y
+CONFIG_CGROUP_DEVICE=y
+CONFIG_CGROUP_CPUACCT=y
 CONFIG_CGROUP_PERF=y
-CONFIG_BLK_CGROUP=y
+CONFIG_CHECKPOINT_RESTORE=y
 CONFIG_NAMESPACES=y
 CONFIG_USER_NS=y
 CONFIG_SCHED_AUTOGROUP=y
@@ -53,7 +52,6 @@ CONFIG_UNIXWARE_DISKLABEL=y
 CONFIG_CFQ_GROUP_IOSCHED=y
 CONFIG_DEFAULT_DEADLINE=y
 CONFIG_LIVEPATCH=y
-CONFIG_MARCH_Z196=y
 CONFIG_TUNE_ZEC12=y
 CONFIG_NR_CPUS=512
 CONFIG_NUMA=y
@@ -62,6 +60,14 @@ CONFIG_MEMORY_HOTPLUG=y
 CONFIG_MEMORY_HOTREMOVE=y
 CONFIG_KSM=y
 CONFIG_TRANSPARENT_HUGEPAGE=y
+CONFIG_CLEANCACHE=y
+CONFIG_FRONTSWAP=y
+CONFIG_CMA=y
+CONFIG_ZSWAP=y
+CONFIG_ZBUD=m
+CONFIG_ZSMALLOC=m
+CONFIG_ZSMALLOC_STAT=y
+CONFIG_IDLE_PAGE_TRACKING=y
 CONFIG_PCI=y
 CONFIG_HOTPLUG_PCI=y
 CONFIG_HOTPLUG_PCI_S390=y
@@ -447,6 +453,7 @@ CONFIG_HW_RANDOM_VIRTIO=m
 CONFIG_RAW_DRIVER=m
 CONFIG_HANGCHECK_TIMER=m
 CONFIG_TN3270_FS=y
+# CONFIG_HWMON is not set
 CONFIG_WATCHDOG=y
 CONFIG_WATCHDOG_NOWAYOUT=y
 CONFIG_SOFT_WATCHDOG=m
@@ -530,6 +537,8 @@ CONFIG_NLS_UTF8=m
 CONFIG_DLM=m
 CONFIG_PRINTK_TIME=y
 CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_INFO_DWARF4=y
+CONFIG_GDB_SCRIPTS=y
 # CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_FRAME_WARN=1024
 CONFIG_UNUSED_SYMBOLS=y
@@ -546,11 +555,12 @@ CONFIG_FTRACE_SYSCALLS=y
 CONFIG_STACK_TRACER=y
 CONFIG_BLK_DEV_IO_TRACE=y
 CONFIG_UPROBE_EVENT=y
+CONFIG_FUNCTION_PROFILER=y
+CONFIG_TRACE_ENUM_MAP_FILE=y
 CONFIG_LKDTM=m
 CONFIG_PERCPU_TEST=m
 CONFIG_ATOMIC64_SELFTEST=y
 CONFIG_TEST_BPF=m
-# CONFIG_STRICT_DEVMEM is not set
 CONFIG_S390_PTDUMP=y
 CONFIG_ENCRYPTED_KEYS=m
 CONFIG_SECURITY=y
@@ -594,8 +604,6 @@ CONFIG_CRYPTO_SEED=m
 CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_TEA=m
 CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_ZLIB=y
-CONFIG_CRYPTO_LZO=m
 CONFIG_CRYPTO_LZ4=m
 CONFIG_CRYPTO_LZ4HC=m
 CONFIG_CRYPTO_USER_API_HASH=m
@@ -607,7 +615,7 @@ CONFIG_CRYPTO_SHA512_S390=m
 CONFIG_CRYPTO_DES_S390=m
 CONFIG_CRYPTO_AES_S390=m
 CONFIG_CRYPTO_GHASH_S390=m
-CONFIG_ASYMMETRIC_KEY_TYPE=m
+CONFIG_ASYMMETRIC_KEY_TYPE=y
 CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=m
 CONFIG_X509_CERTIFICATE_PARSER=m
 CONFIG_CRC7=m

arch/s390/configs/zfcpdump_defconfig

@@ -1,5 +1,5 @@
 # CONFIG_SWAP is not set
-CONFIG_NO_HZ=y
+CONFIG_NO_HZ_IDLE=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
@@ -7,7 +7,6 @@ CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_PARTITION_ADVANCED=y
 CONFIG_IBM_PARTITION=y
 CONFIG_DEFAULT_DEADLINE=y
-CONFIG_MARCH_Z196=y
 CONFIG_TUNE_ZEC12=y
 # CONFIG_COMPAT is not set
 CONFIG_NR_CPUS=2
@@ -64,7 +63,6 @@ CONFIG_PANIC_ON_OOPS=y
 # CONFIG_SCHED_DEBUG is not set
 CONFIG_RCU_CPU_STALL_TIMEOUT=60
 # CONFIG_FTRACE is not set
-# CONFIG_STRICT_DEVMEM is not set
 # CONFIG_PFAULT is not set
 # CONFIG_S390_HYPFS_FS is not set
 # CONFIG_VIRTUALIZATION is not set

arch/s390/defconfig

@@ -1,8 +1,8 @@
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
-CONFIG_FHANDLE=y
+CONFIG_USELIB=y
 CONFIG_AUDIT=y
-CONFIG_NO_HZ=y
+CONFIG_NO_HZ_IDLE=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_TASKSTATS=y
 CONFIG_TASK_DELAY_ACCT=y
@@ -11,19 +11,19 @@ CONFIG_TASK_IO_ACCOUNTING=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_CGROUPS=y
-CONFIG_CGROUP_FREEZER=y
-CONFIG_CGROUP_PIDS=y
-CONFIG_CGROUP_DEVICE=y
-CONFIG_CPUSETS=y
-CONFIG_CGROUP_CPUACCT=y
 CONFIG_MEMCG=y
 CONFIG_MEMCG_SWAP=y
-CONFIG_MEMCG_KMEM=y
-CONFIG_CGROUP_HUGETLB=y
-CONFIG_CGROUP_PERF=y
+CONFIG_BLK_CGROUP=y
 CONFIG_CGROUP_SCHED=y
 CONFIG_RT_GROUP_SCHED=y
-CONFIG_BLK_CGROUP=y
+CONFIG_CGROUP_PIDS=y
+CONFIG_CGROUP_FREEZER=y
+CONFIG_CGROUP_HUGETLB=y
+CONFIG_CPUSETS=y
+CONFIG_CGROUP_DEVICE=y
+CONFIG_CGROUP_CPUACCT=y
+CONFIG_CGROUP_PERF=y
+CONFIG_CHECKPOINT_RESTORE=y
 CONFIG_NAMESPACES=y
 CONFIG_USER_NS=y
 CONFIG_BLK_DEV_INITRD=y
@@ -44,7 +44,6 @@ CONFIG_PARTITION_ADVANCED=y
 CONFIG_IBM_PARTITION=y
 CONFIG_DEFAULT_DEADLINE=y
 CONFIG_LIVEPATCH=y
-CONFIG_MARCH_Z196=y
 CONFIG_NR_CPUS=256
 CONFIG_NUMA=y
 CONFIG_HZ_100=y
@@ -52,6 +51,14 @@ CONFIG_MEMORY_HOTPLUG=y
 CONFIG_MEMORY_HOTREMOVE=y
 CONFIG_KSM=y
 CONFIG_TRANSPARENT_HUGEPAGE=y
+CONFIG_CLEANCACHE=y
+CONFIG_FRONTSWAP=y
+CONFIG_CMA=y
+CONFIG_ZSWAP=y
+CONFIG_ZBUD=m
+CONFIG_ZSMALLOC=m
+CONFIG_ZSMALLOC_STAT=y
+CONFIG_IDLE_PAGE_TRACKING=y
 CONFIG_CRASH_DUMP=y
 CONFIG_BINFMT_MISC=m
 CONFIG_HIBERNATION=y
@@ -61,7 +68,6 @@ CONFIG_UNIX=y
 CONFIG_NET_KEY=y
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
-# CONFIG_INET_LRO is not set
 CONFIG_L2TP=m
 CONFIG_L2TP_DEBUGFS=m
 CONFIG_VLAN_8021Q=y
@@ -144,6 +150,9 @@ CONFIG_TMPFS=y
 CONFIG_TMPFS_POSIX_ACL=y
 CONFIG_HUGETLBFS=y
 # CONFIG_NETWORK_FILESYSTEMS is not set
+CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_INFO_DWARF4=y
+CONFIG_GDB_SCRIPTS=y
 CONFIG_UNUSED_SYMBOLS=y
 CONFIG_DEBUG_SECTION_MISMATCH=y
 CONFIG_DEBUG_FORCE_WEAK_PER_CPU=y
@@ -158,20 +167,21 @@ CONFIG_LOCK_STAT=y
 CONFIG_DEBUG_LOCKDEP=y
 CONFIG_DEBUG_ATOMIC_SLEEP=y
 CONFIG_DEBUG_LIST=y
-CONFIG_DEBUG_PI_LIST=y
 CONFIG_DEBUG_SG=y
 CONFIG_DEBUG_NOTIFIERS=y
 CONFIG_RCU_CPU_STALL_TIMEOUT=60
 CONFIG_RCU_TRACE=y
 CONFIG_LATENCYTOP=y
 CONFIG_DEBUG_STRICT_USER_COPY_CHECKS=y
-CONFIG_TRACER_SNAPSHOT=y
+CONFIG_SCHED_TRACER=y
+CONFIG_FTRACE_SYSCALLS=y
 CONFIG_TRACER_SNAPSHOT_PER_CPU_SWAP=y
 CONFIG_STACK_TRACER=y
 CONFIG_BLK_DEV_IO_TRACE=y
 CONFIG_UPROBE_EVENT=y
+CONFIG_FUNCTION_PROFILER=y
+CONFIG_TRACE_ENUM_MAP_FILE=y
 CONFIG_KPROBES_SANITY_TEST=y
-# CONFIG_STRICT_DEVMEM is not set
 CONFIG_S390_PTDUMP=y
 CONFIG_CRYPTO_CRYPTD=m
 CONFIG_CRYPTO_AUTHENC=m
@@ -212,8 +222,6 @@ CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_TEA=m
 CONFIG_CRYPTO_TWOFISH=m
 CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_ZLIB=m
-CONFIG_CRYPTO_LZO=m
 CONFIG_CRYPTO_LZ4=m
 CONFIG_CRYPTO_LZ4HC=m
 CONFIG_CRYPTO_ANSI_CPRNG=m

arch/s390/mm/fault.c

@@ -250,6 +250,7 @@ static noinline void do_sigsegv(struct pt_regs *regs, int si_code)
 
 	report_user_fault(regs, SIGSEGV, 1);
 	si.si_signo = SIGSEGV;
+	si.si_errno = 0;
 	si.si_code = si_code;
 	si.si_addr = (void __user *)(regs->int_parm_long & __FAIL_ADDR_MASK);
 	force_sig_info(SIGSEGV, &si, current);

arch/s390/net/bpf_jit.h

@@ -37,7 +37,7 @@ extern u8 sk_load_word[], sk_load_half[], sk_load_byte[];
  *	      |		      |     |
  *	      +---------------+     |
  *	      | 8 byte skbp   |     |
- * R15+170 -> +---------------+     |
+ * R15+176 -> +---------------+     |
  *	      | 8 byte hlen   |     |
  * R15+168 -> +---------------+     |
  *	      | 4 byte align  |     |
@@ -58,7 +58,7 @@ extern u8 sk_load_word[], sk_load_half[], sk_load_byte[];
 #define STK_OFF		(STK_SPACE - STK_160_UNUSED)
 #define STK_OFF_TMP	160	/* Offset of tmp buffer on stack */
 #define STK_OFF_HLEN	168	/* Offset of SKB header length on stack */
-#define STK_OFF_SKBP	170	/* Offset of SKB pointer on stack */
+#define STK_OFF_SKBP	176	/* Offset of SKB pointer on stack */
 
 #define STK_OFF_R6	(160 - 11 * 8)	/* Offset of r6 on stack */
 #define STK_OFF_TCCNT	(160 - 12 * 8)	/* Offset of tail_call_cnt on stack */

arch/s390/net/bpf_jit_comp.c

@@ -45,7 +45,7 @@ struct bpf_jit {
 	int labels[1];		/* Labels for local jumps */
 };
 
-#define BPF_SIZE_MAX	0x7ffff	/* Max size for program (20 bit signed displ) */
+#define BPF_SIZE_MAX	0xffff	/* Max size for program (16 bit branches) */
 
 #define SEEN_SKB	1	/* skb access */
 #define SEEN_MEM	2	/* use mem[] for temporary storage */
@@ -450,7 +450,7 @@ static void bpf_jit_prologue(struct bpf_jit *jit)
 		emit_load_skb_data_hlen(jit);
 	if (jit->seen & SEEN_SKB_CHANGE)
 		/* stg %b1,ST_OFF_SKBP(%r0,%r15) */
-		EMIT6_DISP_LH(0xe3000000, 0x0024, REG_W1, REG_0, REG_15,
+		EMIT6_DISP_LH(0xe3000000, 0x0024, BPF_REG_1, REG_0, REG_15,
 			      STK_OFF_SKBP);
 }
 

arch/sparc/include/asm/head_64.h

@@ -15,6 +15,10 @@
 
 #define	PTREGS_OFF	(STACK_BIAS + STACKFRAME_SZ)
 
+#define	RTRAP_PSTATE		(PSTATE_TSO|PSTATE_PEF|PSTATE_PRIV|PSTATE_IE)
+#define	RTRAP_PSTATE_IRQOFF	(PSTATE_TSO|PSTATE_PEF|PSTATE_PRIV)
+#define RTRAP_PSTATE_AG_IRQOFF	(PSTATE_TSO|PSTATE_PEF|PSTATE_PRIV|PSTATE_AG)
+
 #define __CHEETAH_ID	0x003e0014
 #define __JALAPENO_ID	0x003e0016
 #define __SERRANO_ID	0x003e0022

arch/sparc/include/asm/ttable.h

@@ -589,8 +589,8 @@ user_rtt_fill_64bit:					\
 	 restored;					\
 	nop; nop; nop; nop; nop; nop;			\
 	nop; nop; nop; nop; nop;			\
-	ba,a,pt	%xcc, user_rtt_fill_fixup;		\
-	ba,a,pt	%xcc, user_rtt_fill_fixup;		\
+	ba,a,pt	%xcc, user_rtt_fill_fixup_dax;		\
+	ba,a,pt	%xcc, user_rtt_fill_fixup_mna;		\
 	ba,a,pt	%xcc, user_rtt_fill_fixup;
 
 
@@ -652,8 +652,8 @@ user_rtt_fill_32bit:					\
 	 restored;					\
 	nop; nop; nop; nop; nop;			\
 	nop; nop; nop;					\
-	ba,a,pt	%xcc, user_rtt_fill_fixup;		\
-	ba,a,pt	%xcc, user_rtt_fill_fixup;		\
+	ba,a,pt	%xcc, user_rtt_fill_fixup_dax;		\
+	ba,a,pt	%xcc, user_rtt_fill_fixup_mna;		\
 	ba,a,pt	%xcc, user_rtt_fill_fixup;
 
 

arch/sparc/kernel/Makefile

@@ -21,6 +21,7 @@ CFLAGS_REMOVE_perf_event.o := -pg
 CFLAGS_REMOVE_pcr.o := -pg
 endif
 
+obj-$(CONFIG_SPARC64)   += urtt_fill.o
 obj-$(CONFIG_SPARC32)   += entry.o wof.o wuf.o
 obj-$(CONFIG_SPARC32)   += etrap_32.o
 obj-$(CONFIG_SPARC32)   += rtrap_32.o

arch/sparc/kernel/rtrap_64.S

@@ -14,10 +14,6 @@
 #include <asm/visasm.h>
 #include <asm/processor.h>
 
-#define		RTRAP_PSTATE		(PSTATE_TSO|PSTATE_PEF|PSTATE_PRIV|PSTATE_IE)
-#define		RTRAP_PSTATE_IRQOFF	(PSTATE_TSO|PSTATE_PEF|PSTATE_PRIV)
-#define		RTRAP_PSTATE_AG_IRQOFF	(PSTATE_TSO|PSTATE_PEF|PSTATE_PRIV|PSTATE_AG)
-
 #ifdef CONFIG_CONTEXT_TRACKING
 # define SCHEDULE_USER schedule_user
 #else
@@ -242,52 +238,17 @@ rt_continue:	ldx			[%sp + PTREGS_OFF + PT_V9_G1], %g1
 		 wrpr			%g1, %cwp
 		ba,a,pt			%xcc, user_rtt_fill_64bit
 
-user_rtt_fill_fixup:
-		rdpr	%cwp, %g1
-		add	%g1, 1, %g1
-		wrpr	%g1, 0x0, %cwp
-
-		rdpr	%wstate, %g2
-		sll	%g2, 3, %g2
-		wrpr	%g2, 0x0, %wstate
-
-		/* We know %canrestore and %otherwin are both zero.  */
-
-		sethi	%hi(sparc64_kern_pri_context), %g2
-		ldx	[%g2 + %lo(sparc64_kern_pri_context)], %g2
-		mov	PRIMARY_CONTEXT, %g1
-
-661:		stxa	%g2, [%g1] ASI_DMMU
-		.section .sun4v_1insn_patch, "ax"
-		.word	661b
-		stxa	%g2, [%g1] ASI_MMU
-		.previous
-
-		sethi	%hi(KERNBASE), %g1
-		flush	%g1
+user_rtt_fill_fixup_dax:
+		ba,pt	%xcc, user_rtt_fill_fixup_common
+		 mov	1, %g3
 
-		or	%g4, FAULT_CODE_WINFIXUP, %g4
-		stb	%g4, [%g6 + TI_FAULT_CODE]
-		stx	%g5, [%g6 + TI_FAULT_ADDR]
+user_rtt_fill_fixup_mna:
+		ba,pt	%xcc, user_rtt_fill_fixup_common
+		 mov	2, %g3
 
-		mov	%g6, %l1
-		wrpr	%g0, 0x0, %tl
-
-661:		nop
-		.section		.sun4v_1insn_patch, "ax"
-		.word			661b
-		SET_GL(0)
-		.previous
-
-		wrpr	%g0, RTRAP_PSTATE, %pstate
-
-		mov	%l1, %g6
-		ldx	[%g6 + TI_TASK], %g4
-		LOAD_PER_CPU_BASE(%g5, %g6, %g1, %g2, %g3)
-		call	do_sparc64_fault
-		 add	%sp, PTREGS_OFF, %o0
-		ba,pt	%xcc, rtrap
-		 nop
+user_rtt_fill_fixup:
+		ba,pt	%xcc, user_rtt_fill_fixup_common
+		 clr	%g3
 
 user_rtt_pre_restore:
 		add			%g1, 1, %g1

arch/sparc/kernel/signal32.c

@@ -138,12 +138,24 @@ int copy_siginfo_from_user32(siginfo_t *to, compat_siginfo_t __user *from)
 	return 0;
 }
 
+/* Checks if the fp is valid.  We always build signal frames which are
+ * 16-byte aligned, therefore we can always enforce that the restore
+ * frame has that property as well.
+ */
+static bool invalid_frame_pointer(void __user *fp, int fplen)
+{
+	if ((((unsigned long) fp) & 15) ||
+	    ((unsigned long)fp) > 0x100000000ULL - fplen)
+		return true;
+	return false;
+}
+
 void do_sigreturn32(struct pt_regs *regs)
 {
 	struct signal_frame32 __user *sf;
 	compat_uptr_t fpu_save;
 	compat_uptr_t rwin_save;
-	unsigned int psr;
+	unsigned int psr, ufp;
 	unsigned int pc, npc;
 	sigset_t set;
 	compat_sigset_t seta;
@@ -158,11 +170,16 @@ void do_sigreturn32(struct pt_regs *regs)
 	sf = (struct signal_frame32 __user *) regs->u_regs[UREG_FP];
 
 	/* 1. Make sure we are not getting garbage from the user */
-	if (!access_ok(VERIFY_READ, sf, sizeof(*sf)) ||
-	    (((unsigned long) sf) & 3))
+	if (invalid_frame_pointer(sf, sizeof(*sf)))
+		goto segv;
+
+	if (get_user(ufp, &sf->info.si_regs.u_regs[UREG_FP]))
+		goto segv;
+
+	if (ufp & 0x7)
 		goto segv;
 
-	if (get_user(pc, &sf->info.si_regs.pc) ||
+	if (__get_user(pc, &sf->info.si_regs.pc) ||
 	    __get_user(npc, &sf->info.si_regs.npc))
 		goto segv;
 
@@ -227,7 +244,7 @@ segv:
 asmlinkage void do_rt_sigreturn32(struct pt_regs *regs)
 {
 	struct rt_signal_frame32 __user *sf;
-	unsigned int psr, pc, npc;
+	unsigned int psr, pc, npc, ufp;
 	compat_uptr_t fpu_save;
 	compat_uptr_t rwin_save;
 	sigset_t set;
@@ -242,11 +259,16 @@ asmlinkage void do_rt_sigreturn32(struct pt_regs *regs)
 	sf = (struct rt_signal_frame32 __user *) regs->u_regs[UREG_FP];
 
 	/* 1. Make sure we are not getting garbage from the user */
-	if (!access_ok(VERIFY_READ, sf, sizeof(*sf)) ||
-	    (((unsigned long) sf) & 3))
+	if (invalid_frame_pointer(sf, sizeof(*sf)))
 		goto segv;
 
-	if (get_user(pc, &sf->regs.pc) || 
+	if (get_user(ufp, &sf->regs.u_regs[UREG_FP]))
+		goto segv;
+
+	if (ufp & 0x7)
+		goto segv;
+
+	if (__get_user(pc, &sf->regs.pc) || 
 	    __get_user(npc, &sf->regs.npc))
 		goto segv;
 
@@ -307,14 +329,6 @@ segv:
 	force_sig(SIGSEGV, current);
 }
 
-/* Checks if the fp is valid */
-static int invalid_frame_pointer(void __user *fp, int fplen)
-{
-	if ((((unsigned long) fp) & 7) || ((unsigned long)fp) > 0x100000000ULL - fplen)
-		return 1;
-	return 0;
-}
-
 static void __user *get_sigframe(struct ksignal *ksig, struct pt_regs *regs, unsigned long framesize)
 {
 	unsigned long sp;

arch/sparc/kernel/signal_32.c

@@ -60,10 +60,22 @@ struct rt_signal_frame {
 #define SF_ALIGNEDSZ  (((sizeof(struct signal_frame) + 7) & (~7)))
 #define RT_ALIGNEDSZ  (((sizeof(struct rt_signal_frame) + 7) & (~7)))
 
+/* Checks if the fp is valid.  We always build signal frames which are
+ * 16-byte aligned, therefore we can always enforce that the restore
+ * frame has that property as well.
+ */
+static inline bool invalid_frame_pointer(void __user *fp, int fplen)
+{
+	if ((((unsigned long) fp) & 15) || !__access_ok((unsigned long)fp, fplen))
+		return true;
+
+	return false;
+}
+
 asmlinkage void do_sigreturn(struct pt_regs *regs)
 {
+	unsigned long up_psr, pc, npc, ufp;
 	struct signal_frame __user *sf;
-	unsigned long up_psr, pc, npc;
 	sigset_t set;
 	__siginfo_fpu_t __user *fpu_save;
 	__siginfo_rwin_t __user *rwin_save;
@@ -77,10 +89,13 @@ asmlinkage void do_sigreturn(struct pt_regs *regs)
 	sf = (struct signal_frame __user *) regs->u_regs[UREG_FP];
 
 	/* 1. Make sure we are not getting garbage from the user */
-	if (!access_ok(VERIFY_READ, sf, sizeof(*sf)))
+	if (!invalid_frame_pointer(sf, sizeof(*sf)))
+		goto segv_and_exit;
+
+	if (get_user(ufp, &sf->info.si_regs.u_regs[UREG_FP]))
 		goto segv_and_exit;
 
-	if (((unsigned long) sf) & 3)
+	if (ufp & 0x7)
 		goto segv_and_exit;
 
 	err = __get_user(pc,  &sf->info.si_regs.pc);
@@ -127,7 +142,7 @@ segv_and_exit:
 asmlinkage void do_rt_sigreturn(struct pt_regs *regs)
 {
 	struct rt_signal_frame __user *sf;
-	unsigned int psr, pc, npc;
+	unsigned int psr, pc, npc, ufp;
 	__siginfo_fpu_t __user *fpu_save;
 	__siginfo_rwin_t __user *rwin_save;
 	sigset_t set;
@@ -135,8 +150,13 @@ asmlinkage void do_rt_sigreturn(struct pt_regs *regs)
 
 	synchronize_user_stack();
 	sf = (struct rt_signal_frame __user *) regs->u_regs[UREG_FP];
-	if (!access_ok(VERIFY_READ, sf, sizeof(*sf)) ||
-	    (((unsigned long) sf) & 0x03))
+	if (!invalid_frame_pointer(sf, sizeof(*sf)))
+		goto segv;
+
+	if (get_user(ufp, &sf->regs.u_regs[UREG_FP]))
+		goto segv;
+
+	if (ufp & 0x7)
 		goto segv;
 
 	err = __get_user(pc, &sf->regs.pc);
@@ -178,15 +198,6 @@ segv:
 	force_sig(SIGSEGV, current);
 }
 
-/* Checks if the fp is valid */
-static inline int invalid_frame_pointer(void __user *fp, int fplen)
-{
-	if ((((unsigned long) fp) & 7) || !__access_ok((unsigned long)fp, fplen))
-		return 1;
-
-	return 0;
-}
-
 static inline void __user *get_sigframe(struct ksignal *ksig, struct pt_regs *regs, unsigned long framesize)
 {
 	unsigned long sp = regs->u_regs[UREG_FP];

arch/sparc/kernel/signal_64.c

@@ -234,6 +234,17 @@ do_sigsegv:
 	goto out;
 }
 
+/* Checks if the fp is valid.  We always build rt signal frames which
+ * are 16-byte aligned, therefore we can always enforce that the
+ * restore frame has that property as well.
+ */
+static bool invalid_frame_pointer(void __user *fp)
+{
+	if (((unsigned long) fp) & 15)
+		return true;
+	return false;
+}
+
 struct rt_signal_frame {
 	struct sparc_stackf	ss;
 	siginfo_t		info;
@@ -246,8 +257,8 @@ struct rt_signal_frame {
 
 void do_rt_sigreturn(struct pt_regs *regs)
 {
+	unsigned long tpc, tnpc, tstate, ufp;
 	struct rt_signal_frame __user *sf;
-	unsigned long tpc, tnpc, tstate;
 	__siginfo_fpu_t __user *fpu_save;
 	__siginfo_rwin_t __user *rwin_save;
 	sigset_t set;
@@ -261,10 +272,16 @@ void do_rt_sigreturn(struct pt_regs *regs)
 		(regs->u_regs [UREG_FP] + STACK_BIAS);
 
 	/* 1. Make sure we are not getting garbage from the user */
-	if (((unsigned long) sf) & 3)
+	if (invalid_frame_pointer(sf))
+		goto segv;
+
+	if (get_user(ufp, &sf->regs.u_regs[UREG_FP]))
 		goto segv;
 
-	err = get_user(tpc, &sf->regs.tpc);
+	if ((ufp + STACK_BIAS) & 0x7)
+		goto segv;
+
+	err = __get_user(tpc, &sf->regs.tpc);
 	err |= __get_user(tnpc, &sf->regs.tnpc);
 	if (test_thread_flag(TIF_32BIT)) {
 		tpc &= 0xffffffff;
@@ -308,14 +325,6 @@ segv:
 	force_sig(SIGSEGV, current);
 }
 
-/* Checks if the fp is valid */
-static int invalid_frame_pointer(void __user *fp)
-{
-	if (((unsigned long) fp) & 15)
-		return 1;
-	return 0;
-}
-
 static inline void __user *get_sigframe(struct ksignal *ksig, struct pt_regs *regs, unsigned long framesize)
 {
 	unsigned long sp = regs->u_regs[UREG_FP] + STACK_BIAS;

arch/sparc/kernel/sigutil_32.c

@@ -48,6 +48,10 @@ int save_fpu_state(struct pt_regs *regs, __siginfo_fpu_t __user *fpu)
 int restore_fpu_state(struct pt_regs *regs, __siginfo_fpu_t __user *fpu)
 {
 	int err;
+
+	if (((unsigned long) fpu) & 3)
+		return -EFAULT;
+
 #ifdef CONFIG_SMP
 	if (test_tsk_thread_flag(current, TIF_USEDFPU))
 		regs->psr &= ~PSR_EF;
@@ -97,7 +101,10 @@ int restore_rwin_state(__siginfo_rwin_t __user *rp)
 	struct thread_info *t = current_thread_info();
 	int i, wsaved, err;
 
-	__get_user(wsaved, &rp->wsaved);
+	if (((unsigned long) rp) & 3)
+		return -EFAULT;
+
+	get_user(wsaved, &rp->wsaved);
 	if (wsaved > NSWINS)
 		return -EFAULT;
 

arch/sparc/kernel/sigutil_64.c

@@ -37,7 +37,10 @@ int restore_fpu_state(struct pt_regs *regs, __siginfo_fpu_t __user *fpu)
 	unsigned long fprs;
 	int err;
 
-	err = __get_user(fprs, &fpu->si_fprs);
+	if (((unsigned long) fpu) & 7)
+		return -EFAULT;
+
+	err = get_user(fprs, &fpu->si_fprs);
 	fprs_write(0);
 	regs->tstate &= ~TSTATE_PEF;
 	if (fprs & FPRS_DL)
@@ -72,7 +75,10 @@ int restore_rwin_state(__siginfo_rwin_t __user *rp)
 	struct thread_info *t = current_thread_info();
 	int i, wsaved, err;
 
-	__get_user(wsaved, &rp->wsaved);
+	if (((unsigned long) rp) & 7)
+		return -EFAULT;
+
+	get_user(wsaved, &rp->wsaved);
 	if (wsaved > NSWINS)
 		return -EFAULT;
 

arch/sparc/kernel/urtt_fill.S

@@ -0,0 +1,98 @@
+#include <asm/thread_info.h>
+#include <asm/trap_block.h>
+#include <asm/spitfire.h>
+#include <asm/ptrace.h>
+#include <asm/head.h>
+
+		.text
+		.align	8
+		.globl	user_rtt_fill_fixup_common
+user_rtt_fill_fixup_common:
+		rdpr	%cwp, %g1
+		add	%g1, 1, %g1
+		wrpr	%g1, 0x0, %cwp
+
+		rdpr	%wstate, %g2
+		sll	%g2, 3, %g2
+		wrpr	%g2, 0x0, %wstate
+
+		/* We know %canrestore and %otherwin are both zero.  */
+
+		sethi	%hi(sparc64_kern_pri_context), %g2
+		ldx	[%g2 + %lo(sparc64_kern_pri_context)], %g2
+		mov	PRIMARY_CONTEXT, %g1
+
+661:		stxa	%g2, [%g1] ASI_DMMU
+		.section .sun4v_1insn_patch, "ax"
+		.word	661b
+		stxa	%g2, [%g1] ASI_MMU
+		.previous
+
+		sethi	%hi(KERNBASE), %g1
+		flush	%g1
+
+		mov	%g4, %l4
+		mov	%g5, %l5
+		brnz,pn	%g3, 1f
+		 mov	%g3, %l3
+
+		or	%g4, FAULT_CODE_WINFIXUP, %g4
+		stb	%g4, [%g6 + TI_FAULT_CODE]
+		stx	%g5, [%g6 + TI_FAULT_ADDR]
+1:
+		mov	%g6, %l1
+		wrpr	%g0, 0x0, %tl
+
+661:		nop
+		.section		.sun4v_1insn_patch, "ax"
+		.word			661b
+		SET_GL(0)
+		.previous
+
+		wrpr	%g0, RTRAP_PSTATE, %pstate
+
+		mov	%l1, %g6
+		ldx	[%g6 + TI_TASK], %g4
+		LOAD_PER_CPU_BASE(%g5, %g6, %g1, %g2, %g3)
+
+		brnz,pn	%l3, 1f
+		 nop
+
+		call	do_sparc64_fault
+		 add	%sp, PTREGS_OFF, %o0
+		ba,pt	%xcc, rtrap
+		 nop
+
+1:		cmp	%g3, 2
+		bne,pn	%xcc, 2f
+		 nop
+
+		sethi	%hi(tlb_type), %g1
+		lduw	[%g1 + %lo(tlb_type)], %g1
+		cmp	%g1, 3
+		bne,pt	%icc, 1f
+		 add	%sp, PTREGS_OFF, %o0
+		mov	%l4, %o2
+		call	sun4v_do_mna
+		 mov	%l5, %o1
+		ba,a,pt	%xcc, rtrap
+1:		mov	%l4, %o1
+		mov	%l5, %o2
+		call	mem_address_unaligned
+		 nop
+		ba,a,pt	%xcc, rtrap
+
+2:		sethi	%hi(tlb_type), %g1
+		mov	%l4, %o1
+		lduw	[%g1 + %lo(tlb_type)], %g1
+		mov	%l5, %o2
+		cmp	%g1, 3
+		bne,pt	%icc, 1f
+		 add	%sp, PTREGS_OFF, %o0
+		call	sun4v_data_access_exception
+		 nop
+		ba,a,pt	%xcc, rtrap
+
+1:		call	spitfire_data_access_exception
+		 nop
+		ba,a,pt	%xcc, rtrap

arch/sparc/mm/init_64.c

@@ -2824,9 +2824,10 @@ void hugetlb_setup(struct pt_regs *regs)
 	 * the Data-TLB for huge pages.
 	 */
 	if (tlb_type == cheetah_plus) {
+		bool need_context_reload = false;
 		unsigned long ctx;
 
-		spin_lock(&ctx_alloc_lock);
+		spin_lock_irq(&ctx_alloc_lock);
 		ctx = mm->context.sparc64_ctx_val;
 		ctx &= ~CTX_PGSZ_MASK;
 		ctx |= CTX_PGSZ_BASE << CTX_PGSZ0_SHIFT;
@@ -2845,9 +2846,12 @@ void hugetlb_setup(struct pt_regs *regs)
 			 * also executing in this address space.
 			 */
 			mm->context.sparc64_ctx_val = ctx;
-			on_each_cpu(context_reload, mm, 0);
+			need_context_reload = true;
 		}
-		spin_unlock(&ctx_alloc_lock);
+		spin_unlock_irq(&ctx_alloc_lock);
+
+		if (need_context_reload)
+			on_each_cpu(context_reload, mm, 0);
 	}
 }
 #endif

arch/x86/kvm/cpuid.c

@@ -181,19 +181,22 @@ int kvm_vcpu_ioctl_set_cpuid(struct kvm_vcpu *vcpu,
 			     struct kvm_cpuid_entry __user *entries)
 {
 	int r, i;
-	struct kvm_cpuid_entry *cpuid_entries;
+	struct kvm_cpuid_entry *cpuid_entries = NULL;
 
 	r = -E2BIG;
 	if (cpuid->nent > KVM_MAX_CPUID_ENTRIES)
 		goto out;
 	r = -ENOMEM;
-	cpuid_entries = vmalloc(sizeof(struct kvm_cpuid_entry) * cpuid->nent);
-	if (!cpuid_entries)
-		goto out;
-	r = -EFAULT;
-	if (copy_from_user(cpuid_entries, entries,
-			   cpuid->nent * sizeof(struct kvm_cpuid_entry)))
-		goto out_free;
+	if (cpuid->nent) {
+		cpuid_entries = vmalloc(sizeof(struct kvm_cpuid_entry) *
+					cpuid->nent);
+		if (!cpuid_entries)
+			goto out;
+		r = -EFAULT;
+		if (copy_from_user(cpuid_entries, entries,
+				   cpuid->nent * sizeof(struct kvm_cpuid_entry)))
+			goto out;
+	}
 	for (i = 0; i < cpuid->nent; i++) {
 		vcpu->arch.cpuid_entries[i].function = cpuid_entries[i].function;
 		vcpu->arch.cpuid_entries[i].eax = cpuid_entries[i].eax;
@@ -212,9 +215,8 @@ int kvm_vcpu_ioctl_set_cpuid(struct kvm_vcpu *vcpu,
 	kvm_x86_ops->cpuid_update(vcpu);
 	r = kvm_update_cpuid(vcpu);
 
-out_free:
-	vfree(cpuid_entries);
 out:
+	vfree(cpuid_entries);
 	return r;
 }
 

arch/x86/kvm/mmu.c

@@ -336,12 +336,12 @@ static gfn_t pse36_gfn_delta(u32 gpte)
 #ifdef CONFIG_X86_64
 static void __set_spte(u64 *sptep, u64 spte)
 {
-	*sptep = spte;
+	WRITE_ONCE(*sptep, spte);
 }
 
 static void __update_clear_spte_fast(u64 *sptep, u64 spte)
 {
-	*sptep = spte;
+	WRITE_ONCE(*sptep, spte);
 }
 
 static u64 __update_clear_spte_slow(u64 *sptep, u64 spte)
@@ -390,7 +390,7 @@ static void __set_spte(u64 *sptep, u64 spte)
 	 */
 	smp_wmb();
 
-	ssptep->spte_low = sspte.spte_low;
+	WRITE_ONCE(ssptep->spte_low, sspte.spte_low);
 }
 
 static void __update_clear_spte_fast(u64 *sptep, u64 spte)
@@ -400,7 +400,7 @@ static void __update_clear_spte_fast(u64 *sptep, u64 spte)
 	ssptep = (union split_spte *)sptep;
 	sspte = (union split_spte)spte;
 
-	ssptep->spte_low = sspte.spte_low;
+	WRITE_ONCE(ssptep->spte_low, sspte.spte_low);
 
 	/*
 	 * If we map the spte from present to nonpresent, we should clear

arch/x86/kvm/x86.c

@@ -2314,6 +2314,7 @@ int kvm_get_msr_common(struct kvm_vcpu *vcpu, struct msr_data *msr_info)
 	case MSR_AMD64_NB_CFG:
 	case MSR_FAM10H_MMIO_CONF_BASE:
 	case MSR_AMD64_BU_CFG2:
+	case MSR_IA32_PERF_CTL:
 		msr_info->data = 0;
 		break;
 	case MSR_K7_EVNTSEL0 ... MSR_K7_EVNTSEL3:
@@ -2972,6 +2973,10 @@ static int kvm_vcpu_ioctl_x86_set_vcpu_events(struct kvm_vcpu *vcpu,
 			      | KVM_VCPUEVENT_VALID_SMM))
 		return -EINVAL;
 
+	if (events->exception.injected &&
+	    (events->exception.nr > 31 || events->exception.nr == NMI_VECTOR))
+		return -EINVAL;
+
 	process_nmi(vcpu);
 	vcpu->arch.exception.pending = events->exception.injected;
 	vcpu->arch.exception.nr = events->exception.nr;
@@ -3036,6 +3041,11 @@ static int kvm_vcpu_ioctl_x86_set_debugregs(struct kvm_vcpu *vcpu,
 	if (dbgregs->flags)
 		return -EINVAL;
 
+	if (dbgregs->dr6 & ~0xffffffffull)
+		return -EINVAL;
+	if (dbgregs->dr7 & ~0xffffffffull)
+		return -EINVAL;
+
 	memcpy(vcpu->arch.db, dbgregs->db, sizeof(vcpu->arch.db));
 	kvm_update_dr0123(vcpu);
 	vcpu->arch.dr6 = dbgregs->dr6;
@@ -7815,7 +7825,7 @@ int __x86_set_memory_region(struct kvm *kvm, int id, gpa_t gpa, u32 size)
 
 	slot = id_to_memslot(slots, id);
 	if (size) {
-		if (WARN_ON(slot->npages))
+		if (slot->npages)
 			return -EEXIST;
 
 		/*

crypto/asymmetric_keys/Kconfig

@@ -13,6 +13,7 @@ config ASYMMETRIC_PUBLIC_KEY_SUBTYPE
 	tristate "Asymmetric public-key crypto algorithm subtype"
 	select MPILIB
 	select CRYPTO_HASH_INFO
+	select CRYPTO_AKCIPHER
 	help
 	  This option provides support for asymmetric public key type handling.
 	  If signature generation and/or verification are to be used,

drivers/acpi/acpi_processor.c

@@ -331,15 +331,6 @@ static int acpi_processor_get_info(struct acpi_device *device)
 		pr->throttling.duty_width = acpi_gbl_FADT.duty_width;
 
 		pr->pblk = object.processor.pblk_address;
-
-		/*
-		 * We don't care about error returns - we just try to mark
-		 * these reserved so that nobody else is confused into thinking
-		 * that this region might be unused..
-		 *
-		 * (In particular, allocating the IO range for Cardbus)
-		 */
-		request_region(pr->throttling.address, 6, "ACPI CPU throttle");
 	}
 
 	/*

drivers/acpi/acpi_video.c

@@ -754,7 +754,8 @@ static int acpi_video_bqc_quirk(struct acpi_video_device *device,
 }
 
 int acpi_video_get_levels(struct acpi_device *device,
-			  struct acpi_video_device_brightness **dev_br)
+			  struct acpi_video_device_brightness **dev_br,
+			  int *pmax_level)
 {
 	union acpi_object *obj = NULL;
 	int i, max_level = 0, count = 0, level_ac_battery = 0;
@@ -841,6 +842,8 @@ int acpi_video_get_levels(struct acpi_device *device,
 
 	br->count = count;
 	*dev_br = br;
+	if (pmax_level)
+		*pmax_level = max_level;
 
 out:
 	kfree(obj);
@@ -869,7 +872,7 @@ acpi_video_init_brightness(struct acpi_video_device *device)
 	struct acpi_video_device_brightness *br = NULL;
 	int result = -EINVAL;
 
-	result = acpi_video_get_levels(device->dev, &br);
+	result = acpi_video_get_levels(device->dev, &br, &max_level);
 	if (result)
 		return result;
 	device->brightness = br;
@@ -1737,7 +1740,7 @@ static void acpi_video_run_bcl_for_osi(struct acpi_video_bus *video)
 
 	mutex_lock(&video->device_list_lock);
 	list_for_each_entry(dev, &video->video_device_list, entry) {
-		if (!acpi_video_device_lcd_query_levels(dev, &levels))
+		if (!acpi_video_device_lcd_query_levels(dev->dev->handle, &levels))
 			kfree(levels);
 	}
 	mutex_unlock(&video->device_list_lock);

drivers/acpi/acpica/hwregs.c

@@ -83,27 +83,22 @@ acpi_hw_write_multiple(u32 value,
 static u8
 acpi_hw_get_access_bit_width(struct acpi_generic_address *reg, u8 max_bit_width)
 {
-	u64 address;
-
 	if (!reg->access_width) {
+		if (reg->space_id == ACPI_ADR_SPACE_SYSTEM_IO) {
+			max_bit_width = 32;
+		}
+
 		/*
 		 * Detect old register descriptors where only the bit_width field
-		 * makes senses. The target address is copied to handle possible
-		 * alignment issues.
+		 * makes senses.
 		 */
-		ACPI_MOVE_64_TO_64(&address, &reg->address);
-		if (!reg->bit_offset && reg->bit_width &&
+		if (reg->bit_width < max_bit_width &&
+		    !reg->bit_offset && reg->bit_width &&
 		    ACPI_IS_POWER_OF_TWO(reg->bit_width) &&
-		    ACPI_IS_ALIGNED(reg->bit_width, 8) &&
-		    ACPI_IS_ALIGNED(address, reg->bit_width)) {
+		    ACPI_IS_ALIGNED(reg->bit_width, 8)) {
 			return (reg->bit_width);
-		} else {
-			if (reg->space_id == ACPI_ADR_SPACE_SYSTEM_IO) {
-				return (32);
-			} else {
-				return (max_bit_width);
-			}
 		}
+		return (max_bit_width);
 	} else {
 		return (1 << (reg->access_width + 2));
 	}

drivers/acpi/processor_throttling.c

@@ -676,6 +676,15 @@ static int acpi_processor_get_throttling_fadt(struct acpi_processor *pr)
 	if (!pr->flags.throttling)
 		return -ENODEV;
 
+	/*
+	 * We don't care about error returns - we just try to mark
+	 * these reserved so that nobody else is confused into thinking
+	 * that this region might be unused..
+	 *
+	 * (In particular, allocating the IO range for Cardbus)
+	 */
+	request_region(pr->throttling.address, 6, "ACPI CPU throttle");
+
 	pr->throttling.state = 0;
 
 	duty_mask = pr->throttling.state_count - 1;

drivers/atm/firestream.c

@@ -181,13 +181,17 @@ static char *res_strings[] = {
 	"reserved 27", 
 	"reserved 28", 
 	"reserved 29", 
-	"reserved 30", 
+	"reserved 30", /* FIXME: The strings between 30-40 might be wrong. */
 	"reassembly abort: no buffers", 
 	"receive buffer overflow", 
 	"change in GFC", 
 	"receive buffer full", 
 	"low priority discard - no receive descriptor", 
 	"low priority discard - missing end of packet", 
+	"reserved 37",
+	"reserved 38",
+	"reserved 39",
+	"reseverd 40",
 	"reserved 41", 
 	"reserved 42", 
 	"reserved 43", 

drivers/atm/iphase.c

@@ -1128,7 +1128,7 @@ static int rx_pkt(struct atm_dev *dev)
 	/* make the ptr point to the corresponding buffer desc entry */  
 	buf_desc_ptr += desc;	  
         if (!desc || (desc > iadev->num_rx_desc) || 
-                      ((buf_desc_ptr->vc_index & 0xffff) > iadev->num_vc)) { 
+                      ((buf_desc_ptr->vc_index & 0xffff) >= iadev->num_vc)) {
             free_desc(dev, desc);
             IF_ERR(printk("IA: bad descriptor desc = %d \n", desc);)
             return -1;

drivers/cpufreq/cpufreq.c

@@ -1832,7 +1832,7 @@ EXPORT_SYMBOL(cpufreq_unregister_notifier);
 unsigned int cpufreq_driver_fast_switch(struct cpufreq_policy *policy,
 					unsigned int target_freq)
 {
-	clamp_val(target_freq, policy->min, policy->max);
+	target_freq = clamp_val(target_freq, policy->min, policy->max);
 
 	return cpufreq_driver->fast_switch(policy, target_freq);
 }

drivers/cpufreq/intel_pstate.c

@@ -449,7 +449,7 @@ static void intel_pstate_init_acpi_perf_limits(struct cpufreq_policy *policy)
 		cpu->acpi_perf_data.states[0].core_frequency =
 					policy->cpuinfo.max_freq / 1000;
 	cpu->valid_pss_table = true;
-	pr_info("_PPC limits will be enforced\n");
+	pr_debug("_PPC limits will be enforced\n");
 
 	return;
 

drivers/crypto/ccp/ccp-crypto-aes-xts.c

@@ -122,6 +122,7 @@ static int ccp_aes_xts_crypt(struct ablkcipher_request *req,
 	struct ccp_ctx *ctx = crypto_tfm_ctx(req->base.tfm);
 	struct ccp_aes_req_ctx *rctx = ablkcipher_request_ctx(req);
 	unsigned int unit;
+	u32 unit_size;
 	int ret;
 
 	if (!ctx->u.aes.key_len)
@@ -133,11 +134,17 @@ static int ccp_aes_xts_crypt(struct ablkcipher_request *req,
 	if (!req->info)
 		return -EINVAL;
 
-	for (unit = 0; unit < ARRAY_SIZE(unit_size_map); unit++)
-		if (!(req->nbytes & (unit_size_map[unit].size - 1)))
-			break;
+	unit_size = CCP_XTS_AES_UNIT_SIZE__LAST;
+	if (req->nbytes <= unit_size_map[0].size) {
+		for (unit = 0; unit < ARRAY_SIZE(unit_size_map); unit++) {
+			if (!(req->nbytes & (unit_size_map[unit].size - 1))) {
+				unit_size = unit_size_map[unit].value;
+				break;
+			}
+		}
+	}
 
-	if ((unit_size_map[unit].value == CCP_XTS_AES_UNIT_SIZE__LAST) ||
+	if ((unit_size == CCP_XTS_AES_UNIT_SIZE__LAST) ||
 	    (ctx->u.aes.key_len != AES_KEYSIZE_128)) {
 		/* Use the fallback to process the request for any
 		 * unsupported unit sizes or key sizes
@@ -158,7 +165,7 @@ static int ccp_aes_xts_crypt(struct ablkcipher_request *req,
 	rctx->cmd.engine = CCP_ENGINE_XTS_AES_128;
 	rctx->cmd.u.xts.action = (encrypt) ? CCP_AES_ACTION_ENCRYPT
 					   : CCP_AES_ACTION_DECRYPT;
-	rctx->cmd.u.xts.unit_size = unit_size_map[unit].value;
+	rctx->cmd.u.xts.unit_size = unit_size;
 	rctx->cmd.u.xts.key = &ctx->u.aes.key_sg;
 	rctx->cmd.u.xts.key_len = ctx->u.aes.key_len;
 	rctx->cmd.u.xts.iv = &rctx->iv_sg;