Merge branches 'pci/enumeration', 'pci/virtualization' and 'pci/cleanup' into next

* pci/enumeration:
  PCI: Generate uppercase hex for modalias interface class

* pci/virtualization:
  PCI: Add ACS quirk for Solarflare SFC9120 & SFC9140
  PCI: Remove unused pci_get_dma_source()
  PCI: Remove unused pci_find_upstream_pcie_bridge()

* pci/cleanup:
  PCI: Remove assignment from complicated "if" conditions
  PCI: Remove assignment from "if" conditions
  PCI: Remove unnecessary curly braces
  PCI: Add space before open parenthesis

drivers/pci/hotplug/acpi_pcihp.c

@@ -182,7 +182,8 @@ int acpi_pci_check_ejectable(struct pci_bus *pbus, acpi_handle handle)
 {
 	acpi_handle bridge_handle, parent_handle;
 
-	if (!(bridge_handle = acpi_pci_get_bridge_handle(pbus)))
+	bridge_handle = acpi_pci_get_bridge_handle(pbus);
+	if (!bridge_handle)
 		return 0;
 	if ((ACPI_FAILURE(acpi_get_parent(handle, &parent_handle))))
 		return 0;

drivers/pci/hotplug/acpiphp_ibm.c

@@ -302,7 +302,7 @@ static int ibm_get_table_from_acpi(char **bufp)
 		goto read_table_done;
 	}
 
-	for(size = 0, i = 0; i < package->package.count; i++) {
+	for (size = 0, i = 0; i < package->package.count; i++) {
 		if (package->package.elements[i].type != ACPI_TYPE_BUFFER) {
 			pr_err("%s:  Invalid APCI element %d\n", __func__, i);
 			goto read_table_done;

drivers/pci/hotplug/cpci_hotplug_core.c

@@ -125,7 +125,8 @@ disable_slot(struct hotplug_slot *hotplug_slot)
 
 	/* Unconfigure device */
 	dbg("%s - unconfiguring slot %s", __func__, slot_name(slot));
-	if ((retval = cpci_unconfigure_slot(slot))) {
+	retval = cpci_unconfigure_slot(slot);
+	if (retval) {
 		err("%s - could not unconfigure slot %s",
 		    __func__, slot_name(slot));
 		goto disable_error;
@@ -141,9 +142,11 @@ disable_slot(struct hotplug_slot *hotplug_slot)
 	}
 	cpci_led_on(slot);
 
-	if (controller->ops->set_power)
-		if ((retval = controller->ops->set_power(slot, 0)))
+	if (controller->ops->set_power) {
+		retval = controller->ops->set_power(slot, 0);
+		if (retval)
 			goto disable_error;
+	}
 
 	if (update_adapter_status(slot->hotplug_slot, 0))
 		warn("failure to update adapter file");
@@ -467,9 +470,9 @@ check_slots(void)
 			    __func__, slot_name(slot), hs_csr);
 
 			if (!slot->extracting) {
-				if (update_latch_status(slot->hotplug_slot, 0)) {
+				if (update_latch_status(slot->hotplug_slot, 0))
 					warn("failure to update latch file");
-				}
+
 				slot->extracting = 1;
 				atomic_inc(&extracting);
 			}

drivers/pci/hotplug/cpcihp_generic.c

@@ -56,7 +56,7 @@
 		if (debug)					\
 			printk (KERN_DEBUG "%s: " format "\n",	\
 				MY_NAME , ## arg);		\
-	} while(0)
+	} while (0)
 #define err(format, arg...) printk(KERN_ERR "%s: " format "\n", MY_NAME , ## arg)
 #define info(format, arg...) printk(KERN_INFO "%s: " format "\n", MY_NAME , ## arg)
 #define warn(format, arg...) printk(KERN_WARNING "%s: " format "\n", MY_NAME , ## arg)
@@ -82,28 +82,28 @@ static int __init validate_parameters(void)
 	char *p;
 	unsigned long tmp;
 
-	if(!bridge) {
+	if (!bridge) {
 		info("not configured, disabling.");
 		return -EINVAL;
 	}
 	str = bridge;
-	if(!*str)
+	if (!*str)
 		return -EINVAL;
 
 	tmp = simple_strtoul(str, &p, 16);
-	if(p == str || tmp > 0xff) {
+	if (p == str || tmp > 0xff) {
 		err("Invalid hotplug bus bridge device bus number");
 		return -EINVAL;
 	}
 	bridge_busnr = (u8) tmp;
 	dbg("bridge_busnr = 0x%02x", bridge_busnr);
-	if(*p != ':') {
+	if (*p != ':') {
 		err("Invalid hotplug bus bridge device");
 		return -EINVAL;
 	}
 	str = p + 1;
 	tmp = simple_strtoul(str, &p, 16);
-	if(p == str || tmp > 0x1f) {
+	if (p == str || tmp > 0x1f) {
 		err("Invalid hotplug bus bridge device slot number");
 		return -EINVAL;
 	}
@@ -112,18 +112,18 @@ static int __init validate_parameters(void)
 
 	dbg("first_slot = 0x%02x", first_slot);
 	dbg("last_slot = 0x%02x", last_slot);
-	if(!(first_slot && last_slot)) {
+	if (!(first_slot && last_slot)) {
 		err("Need to specify first_slot and last_slot");
 		return -EINVAL;
 	}
-	if(last_slot < first_slot) {
+	if (last_slot < first_slot) {
 		err("first_slot must be less than last_slot");
 		return -EINVAL;
 	}
 
 	dbg("port = 0x%04x", port);
 	dbg("enum_bit = 0x%02x", enum_bit);
-	if(enum_bit > 7) {
+	if (enum_bit > 7) {
 		err("Invalid #ENUM bit");
 		return -EINVAL;
 	}
@@ -151,12 +151,12 @@ static int __init cpcihp_generic_init(void)
 		return status;
 
 	r = request_region(port, 1, "#ENUM hotswap signal register");
-	if(!r)
+	if (!r)
 		return -EBUSY;
 
 	dev = pci_get_domain_bus_and_slot(0, bridge_busnr,
 					  PCI_DEVFN(bridge_slot, 0));
-	if(!dev || dev->hdr_type != PCI_HEADER_TYPE_BRIDGE) {
+	if (!dev || dev->hdr_type != PCI_HEADER_TYPE_BRIDGE) {
 		err("Invalid bridge device %s", bridge);
 		pci_dev_put(dev);
 		return -EINVAL;
@@ -169,21 +169,21 @@ static int __init cpcihp_generic_init(void)
 	generic_hpc.ops = &generic_hpc_ops;
 
 	status = cpci_hp_register_controller(&generic_hpc);
-	if(status != 0) {
+	if (status != 0) {
 		err("Could not register cPCI hotplug controller");
 		return -ENODEV;
 	}
 	dbg("registered controller");
 
 	status = cpci_hp_register_bus(bus, first_slot, last_slot);
-	if(status != 0) {
+	if (status != 0) {
 		err("Could not register cPCI hotplug bus");
 		goto init_bus_register_error;
 	}
 	dbg("registered bus");
 
 	status = cpci_hp_start();
-	if(status != 0) {
+	if (status != 0) {
 		err("Could not started cPCI hotplug system");
 		goto init_start_error;
 	}

drivers/pci/hotplug/cpcihp_zt5550.c

@@ -51,7 +51,7 @@
 		if (debug)					\
 			printk (KERN_DEBUG "%s: " format "\n",	\
 				MY_NAME , ## arg);		\
-	} while(0)
+	} while (0)
 #define err(format, arg...) printk(KERN_ERR "%s: " format "\n", MY_NAME , ## arg)
 #define info(format, arg...) printk(KERN_INFO "%s: " format "\n", MY_NAME , ## arg)
 #define warn(format, arg...) printk(KERN_WARNING "%s: " format "\n", MY_NAME , ## arg)
@@ -82,13 +82,13 @@ static int zt5550_hc_config(struct pci_dev *pdev)
 	int ret;
 
 	/* Since we know that no boards exist with two HC chips, treat it as an error */
-	if(hc_dev) {
+	if (hc_dev) {
 		err("too many host controller devices?");
 		return -EBUSY;
 	}
 
 	ret = pci_enable_device(pdev);
-	if(ret) {
+	if (ret) {
 		err("cannot enable %s\n", pci_name(pdev));
 		return ret;
 	}
@@ -98,7 +98,7 @@ static int zt5550_hc_config(struct pci_dev *pdev)
 	dbg("pci resource start %llx", (unsigned long long)pci_resource_start(hc_dev, 1));
 	dbg("pci resource len %llx", (unsigned long long)pci_resource_len(hc_dev, 1));
 
-	if(!request_mem_region(pci_resource_start(hc_dev, 1),
+	if (!request_mem_region(pci_resource_start(hc_dev, 1),
 				pci_resource_len(hc_dev, 1), MY_NAME)) {
 		err("cannot reserve MMIO region");
 		ret = -ENOMEM;
@@ -107,7 +107,7 @@ static int zt5550_hc_config(struct pci_dev *pdev)
 
 	hc_registers =
 	    ioremap(pci_resource_start(hc_dev, 1), pci_resource_len(hc_dev, 1));
-	if(!hc_registers) {
+	if (!hc_registers) {
 		err("cannot remap MMIO region %llx @ %llx",
 			(unsigned long long)pci_resource_len(hc_dev, 1),
 			(unsigned long long)pci_resource_start(hc_dev, 1));
@@ -146,7 +146,7 @@ exit_disable_device:
 
 static int zt5550_hc_cleanup(void)
 {
-	if(!hc_dev)
+	if (!hc_dev)
 		return -ENODEV;
 
 	iounmap(hc_registers);
@@ -170,9 +170,9 @@ static int zt5550_hc_check_irq(void *dev_id)
 	u8 reg;
 
 	ret = 0;
-	if(dev_id == zt5550_hpc.dev_id) {
+	if (dev_id == zt5550_hpc.dev_id) {
 		reg = readb(csr_int_status);
-		if(reg)
+		if (reg)
 			ret = 1;
 	}
 	return ret;
@@ -182,9 +182,9 @@ static int zt5550_hc_enable_irq(void)
 {
 	u8 reg;
 
-	if(hc_dev == NULL) {
+	if (hc_dev == NULL)
 		return -ENODEV;
-	}
+
 	reg = readb(csr_int_mask);
 	reg = reg & ~ENUM_INT_MASK;
 	writeb(reg, csr_int_mask);
@@ -195,9 +195,8 @@ static int zt5550_hc_disable_irq(void)
 {
 	u8 reg;
 
-	if(hc_dev == NULL) {
+	if (hc_dev == NULL)
 		return -ENODEV;
-	}
 
 	reg = readb(csr_int_mask);
 	reg = reg | ENUM_INT_MASK;
@@ -210,15 +209,15 @@ static int zt5550_hc_init_one (struct pci_dev *pdev, const struct pci_device_id
 	int status;
 
 	status = zt5550_hc_config(pdev);
-	if(status != 0) {
+	if (status != 0)
 		return status;
-	}
+
 	dbg("returned from zt5550_hc_config");
 
 	memset(&zt5550_hpc, 0, sizeof (struct cpci_hp_controller));
 	zt5550_hpc_ops.query_enum = zt5550_hc_query_enum;
 	zt5550_hpc.ops = &zt5550_hpc_ops;
-	if(!poll) {
+	if (!poll) {
 		zt5550_hpc.irq = hc_dev->irq;
 		zt5550_hpc.irq_flags = IRQF_SHARED;
 		zt5550_hpc.dev_id = hc_dev;
@@ -231,15 +230,16 @@ static int zt5550_hc_init_one (struct pci_dev *pdev, const struct pci_device_id
 	}
 
 	status = cpci_hp_register_controller(&zt5550_hpc);
-	if(status != 0) {
+	if (status != 0) {
 		err("could not register cPCI hotplug controller");
 		goto init_hc_error;
 	}
 	dbg("registered controller");
 
 	/* Look for first device matching cPCI bus's bridge vendor and device IDs */
-	if(!(bus0_dev = pci_get_device(PCI_VENDOR_ID_DEC,
-					 PCI_DEVICE_ID_DEC_21154, NULL))) {
+	bus0_dev = pci_get_device(PCI_VENDOR_ID_DEC,
+				  PCI_DEVICE_ID_DEC_21154, NULL);
+	if (!bus0_dev) {
 		status = -ENODEV;
 		goto init_register_error;
 	}
@@ -247,14 +247,14 @@ static int zt5550_hc_init_one (struct pci_dev *pdev, const struct pci_device_id
 	pci_dev_put(bus0_dev);
 
 	status = cpci_hp_register_bus(bus0, 0x0a, 0x0f);
-	if(status != 0) {
+	if (status != 0) {
 		err("could not register cPCI hotplug bus");
 		goto init_register_error;
 	}
 	dbg("registered bus");
 
 	status = cpci_hp_start();
-	if(status != 0) {
+	if (status != 0) {
 		err("could not started cPCI hotplug system");
 		cpci_hp_unregister_bus(bus0);
 		goto init_register_error;
@@ -300,11 +300,11 @@ static int __init zt5550_init(void)
 
 	info(DRIVER_DESC " version: " DRIVER_VERSION);
 	r = request_region(ENUM_PORT, 1, "#ENUM hotswap signal register");
-	if(!r)
+	if (!r)
 		return -EBUSY;
 
 	rc = pci_register_driver(&zt5550_hc_driver);
-	if(rc < 0)
+	if (rc < 0)
 		release_region(ENUM_PORT, 1);
 	return rc;
 }

drivers/pci/hotplug/cpqphp.h

@@ -690,7 +690,7 @@ static inline int cpq_get_latch_status(struct controller *ctrl,
 
 	status = (readl(ctrl->hpc_reg + INT_INPUT_CLEAR) & (0x01L << hp_slot));
 
-	return(status == 0) ? 1 : 0;
+	return (status == 0) ? 1 : 0;
 }
 
 

drivers/pci/hotplug/cpqphp_core.c

@@ -1096,9 +1096,8 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 
 	/* initialize our threads if they haven't already been started up */
 	rc = one_time_init();
-	if (rc) {
+	if (rc)
 		goto err_free_bus;
-	}
 
 	dbg("pdev = %p\n", pdev);
 	dbg("pci resource start %llx\n", (unsigned long long)pci_resource_start(pdev, 0));

drivers/pci/hotplug/cpqphp_ctrl.c

@@ -705,9 +705,8 @@ static struct pci_resource *get_max_resource(struct pci_resource **head, u32 siz
 		if (temp == max) {
 			*head = max->next;
 		} else {
-			while (temp && temp->next != max) {
+			while (temp && temp->next != max)
 				temp = temp->next;
-			}
 
 			if (temp)
 				temp->next = max->next;
@@ -903,9 +902,8 @@ irqreturn_t cpqhp_ctrl_intr(int IRQ, void *data)
 	/*
 	 * Check to see if it was our interrupt
 	 */
-	if (!(misc & 0x000C)) {
+	if (!(misc & 0x000C))
 		return IRQ_NONE;
-	}
 
 	if (misc & 0x0004) {
 		/*
@@ -1143,7 +1141,7 @@ static u8 set_controller_speed(struct controller *ctrl, u8 adapter_speed, u8 hp_
 	/* We don't allow freq/mode changes if we find another adapter running
 	 * in another slot on this controller
 	 */
-	for(slot = ctrl->slot; slot; slot = slot->next) {
+	for (slot = ctrl->slot; slot; slot = slot->next) {
 		if (slot->device == (hp_slot + ctrl->slot_device_offset))
 			continue;
 		if (!slot->hotplug_slot || !slot->hotplug_slot->info)
@@ -1193,7 +1191,7 @@ static u8 set_controller_speed(struct controller *ctrl, u8 adapter_speed, u8 hp_
 
 	reg16 = readw(ctrl->hpc_reg + NEXT_CURR_FREQ);
 	reg16 &= ~0x000F;
-	switch(adapter_speed) {
+	switch (adapter_speed) {
 		case(PCI_SPEED_133MHz_PCIX):
 			reg = 0x75;
 			reg16 |= 0xB;
@@ -2006,9 +2004,8 @@ int cpqhp_process_SI(struct controller *ctrl, struct pci_func *func)
 	/* Check to see if the interlock is closed */
 	tempdword = readl(ctrl->hpc_reg + INT_INPUT_CLEAR);
 
-	if (tempdword & (0x01 << hp_slot)) {
+	if (tempdword & (0x01 << hp_slot))
 		return 1;
-	}
 
 	if (func->is_a_board) {
 		rc = board_replaced(func, ctrl);
@@ -2070,9 +2067,8 @@ int cpqhp_process_SI(struct controller *ctrl, struct pci_func *func)
 		}
 	}
 
-	if (rc) {
+	if (rc)
 		dbg("%s: rc = %d\n", __func__, rc);
-	}
 
 	if (p_slot)
 		update_slot_info(ctrl, p_slot);
@@ -2095,9 +2091,8 @@ int cpqhp_process_SS(struct controller *ctrl, struct pci_func *func)
 	device = func->device;
 	func = cpqhp_slot_find(ctrl->bus, device, index++);
 	p_slot = cpqhp_find_slot(ctrl, device);
-	if (p_slot) {
+	if (p_slot)
 		physical_slot = p_slot->number;
-	}
 
 	/* Make sure there are no video controllers here */
 	while (func && !rc) {

drivers/pci/hotplug/cpqphp_nvram.c

@@ -204,9 +204,8 @@ static int load_HRT (void __iomem *rom_start)
 	u8 temp_byte = 0xFF;
 	u32 rc;
 
-	if (!check_for_compaq_ROM(rom_start)) {
+	if (!check_for_compaq_ROM(rom_start))
 		return -ENODEV;
-	}
 
 	available = 1024;
 
@@ -250,9 +249,8 @@ static u32 store_HRT (void __iomem *rom_start)
 
 	available = 1024;
 
-	if (!check_for_compaq_ROM(rom_start)) {
+	if (!check_for_compaq_ROM(rom_start))
 		return(1);
-	}
 
 	buffer = (u32*) evbuffer;
 
@@ -427,9 +425,9 @@ static u32 store_HRT (void __iomem *rom_start)
 
 void compaq_nvram_init (void __iomem *rom_start)
 {
-	if (rom_start) {
+	if (rom_start)
 		compaq_int15_entry_point = (rom_start + ROM_INT15_PHY_ADDR - ROM_PHY_ADDR);
-	}
+
 	dbg("int15 entry  = %p\n", compaq_int15_entry_point);
 
 	/* initialize our int15 lock */
@@ -661,9 +659,8 @@ int compaq_nvram_store (void __iomem *rom_start)
 
 	if (evbuffer_init) {
 		rc = store_HRT(rom_start);
-		if (rc) {
+		if (rc)
 			err(msg_unable_to_save);
-		}
 	}
 	return rc;
 }

drivers/pci/hotplug/ibmphp_core.c

@@ -1023,7 +1023,8 @@ static int enable_slot(struct hotplug_slot *hs)
 	debug("ENABLING SLOT........\n");
 	slot_cur = hs->private;
 
-	if ((rc = validate(slot_cur, ENABLE))) {
+	rc = validate(slot_cur, ENABLE);
+	if (rc) {
 		err("validate function failed\n");
 		goto error_nopower;
 	}
@@ -1199,9 +1200,8 @@ int ibmphp_do_disable_slot(struct slot *slot_cur)
 
 	debug("DISABLING SLOT...\n");
 
-	if ((slot_cur == NULL) || (slot_cur->ctrl == NULL)) {
+	if ((slot_cur == NULL) || (slot_cur->ctrl == NULL))
 		return -ENODEV;
-	}
 
 	flag = slot_cur->flag;
 	slot_cur->flag = 1;
@@ -1336,17 +1336,20 @@ static int __init ibmphp_init(void)
 	for (i = 0; i < 16; i++)
 		irqs[i] = 0;
 
-	if ((rc = ibmphp_access_ebda()))
+	rc = ibmphp_access_ebda();
+	if (rc)
 		goto error;
 	debug("after ibmphp_access_ebda()\n");
 
-	if ((rc = ibmphp_rsrc_init()))
+	rc = ibmphp_rsrc_init();
+	if (rc)
 		goto error;
 	debug("AFTER Resource & EBDA INITIALIZATIONS\n");
 
 	max_slots = get_max_slots();
 
-	if ((rc = ibmphp_register_pci()))
+	rc = ibmphp_register_pci();
+	if (rc)
 		goto error;
 
 	if (init_ops()) {
@@ -1355,9 +1358,9 @@ static int __init ibmphp_init(void)
 	}
 
 	ibmphp_print_test();
-	if ((rc = ibmphp_hpc_start_poll_thread())) {
+	rc = ibmphp_hpc_start_poll_thread();
+	if (rc)
 		goto error;
-	}
 
 exit:
 	return rc;

drivers/pci/hotplug/ibmphp_ebda.c

@@ -215,9 +215,8 @@ static void __init print_ebda_hpc (void)
 			debug ("%s - cap of the slot: %x\n", __func__, hpc_ptr->slots[index].slot_cap);
 		}
 
-		for (index = 0; index < hpc_ptr->bus_count; index++) {
+		for (index = 0; index < hpc_ptr->bus_count; index++)
 			debug ("%s - bus# of each bus controlled by this ctlr: %x\n", __func__, hpc_ptr->buses[index].bus_num);
-		}
 
 		debug ("%s - type of hpc: %x\n", __func__, hpc_ptr->ctlr_type);
 		switch (hpc_ptr->ctlr_type) {

drivers/pci/hotplug/ibmphp_hpc.c

@@ -997,9 +997,8 @@ static int process_changeinstatus (struct slot *pslot, struct slot *poldslot)
 		rc = ibmphp_do_disable_slot (pslot);
 	}
 
-	if (update || disable) {
+	if (update || disable)
 		ibmphp_update_slot_info (pslot);
-	}
 
 	debug ("%s - Exit rc[%d] disable[%x] update[%x]\n", __func__, rc, disable, update);
 

drivers/pci/hotplug/ibmphp_pci.c

@@ -145,7 +145,8 @@ int ibmphp_configure_card (struct pci_func *func, u8 slotno)
 				case PCI_HEADER_TYPE_NORMAL:
 					debug ("single device case.... vendor id = %x, hdr_type = %x, class = %x\n", vendor_id, hdr_type, class);
 					assign_alt_irq (cur_func, class_code);
-					if ((rc = configure_device (cur_func)) < 0) {
+					rc = configure_device(cur_func);
+					if (rc < 0) {
 						/* We need to do this in case some other BARs were properly inserted */
 						err ("was not able to configure devfunc %x on bus %x.\n",
 						     cur_func->device, cur_func->busno);
@@ -157,7 +158,8 @@ int ibmphp_configure_card (struct pci_func *func, u8 slotno)
 					break;
 				case PCI_HEADER_TYPE_MULTIDEVICE:
 					assign_alt_irq (cur_func, class_code);
-					if ((rc = configure_device (cur_func)) < 0) {
+					rc = configure_device(cur_func);
+					if (rc < 0) {
 						/* We need to do this in case some other BARs were properly inserted */
 						err ("was not able to configure devfunc %x on bus %x...bailing out\n",
 						     cur_func->device, cur_func->busno);

drivers/pci/hotplug/ibmphp_res.c

@@ -224,7 +224,8 @@ int __init ibmphp_rsrc_init (void)
 			if ((curr->rsrc_type & RESTYPE) == MMASK) {
 				/* no bus structure exists in place yet */
 				if (list_empty (&gbuses)) {
-					if ((rc = alloc_bus_range (&newbus, &newrange, curr, MEM, 1)))
+					rc = alloc_bus_range(&newbus, &newrange, curr, MEM, 1);
+					if (rc)
 						return rc;
 					list_add_tail (&newbus->bus_list, &gbuses);
 					debug ("gbuses = NULL, Memory Primary Bus %x [%x - %x]\n", newbus->busno, newrange->start, newrange->end);
@@ -237,7 +238,8 @@ int __init ibmphp_rsrc_init (void)
 							return rc;
 					} else {
 						/* went through all the buses and didn't find ours, need to create a new bus node */
-						if ((rc = alloc_bus_range (&newbus, &newrange, curr, MEM, 1)))
+						rc = alloc_bus_range(&newbus, &newrange, curr, MEM, 1);
+						if (rc)
 							return rc;
 
 						list_add_tail (&newbus->bus_list, &gbuses);
@@ -248,7 +250,8 @@ int __init ibmphp_rsrc_init (void)
 				/* prefetchable memory */
 				if (list_empty (&gbuses)) {
 					/* no bus structure exists in place yet */
-					if ((rc = alloc_bus_range (&newbus, &newrange, curr, PFMEM, 1)))
+					rc = alloc_bus_range(&newbus, &newrange, curr, PFMEM, 1);
+					if (rc)
 						return rc;
 					list_add_tail (&newbus->bus_list, &gbuses);
 					debug ("gbuses = NULL, PFMemory Primary Bus %x [%x - %x]\n", newbus->busno, newrange->start, newrange->end);
@@ -261,7 +264,8 @@ int __init ibmphp_rsrc_init (void)
 							return rc;
 					} else {
 						/* went through all the buses and didn't find ours, need to create a new bus node */
-						if ((rc = alloc_bus_range (&newbus, &newrange, curr, PFMEM, 1)))
+						rc = alloc_bus_range(&newbus, &newrange, curr, PFMEM, 1);
+						if (rc)
 							return rc;
 						list_add_tail (&newbus->bus_list, &gbuses);
 						debug ("1st Bus, PFMemory Primary Bus %x [%x - %x]\n", newbus->busno, newrange->start, newrange->end);
@@ -271,7 +275,8 @@ int __init ibmphp_rsrc_init (void)
 				/* IO */
 				if (list_empty (&gbuses)) {
 					/* no bus structure exists in place yet */
-					if ((rc = alloc_bus_range (&newbus, &newrange, curr, IO, 1)))
+					rc = alloc_bus_range(&newbus, &newrange, curr, IO, 1);
+					if (rc)
 						return rc;
 					list_add_tail (&newbus->bus_list, &gbuses);
 					debug ("gbuses = NULL, IO Primary Bus %x [%x - %x]\n", newbus->busno, newrange->start, newrange->end);
@@ -283,7 +288,8 @@ int __init ibmphp_rsrc_init (void)
 							return rc;
 					} else {
 						/* went through all the buses and didn't find ours, need to create a new bus node */
-						if ((rc = alloc_bus_range (&newbus, &newrange, curr, IO, 1)))
+						rc = alloc_bus_range(&newbus, &newrange, curr, IO, 1);
+						if (rc)
 							return rc;
 						list_add_tail (&newbus->bus_list, &gbuses);
 						debug ("1st Bus, IO Primary Bus %x [%x - %x]\n", newbus->busno, newrange->start, newrange->end);
@@ -1038,7 +1044,9 @@ int ibmphp_check_resource (struct resource_node *res, u8 bridge)
 		/* found our range */
 		if (!res_prev) {
 			/* first time in the loop */
-			if ((res_cur->start != range->start) && ((len_tmp = res_cur->start - 1 - range->start) >= res->len)) {
+			len_tmp = res_cur->start - 1 - range->start;
+
+			if ((res_cur->start != range->start) && (len_tmp >= res->len)) {
 				debug ("len_tmp = %x\n", len_tmp);
 
 				if ((len_tmp < len_cur) || (len_cur == 0)) {
@@ -1078,7 +1086,9 @@ int ibmphp_check_resource (struct resource_node *res, u8 bridge)
 		}
 		if (!res_cur->next) {
 			/* last device on the range */
-			if ((range->end != res_cur->end) && ((len_tmp = range->end - (res_cur->end + 1)) >= res->len)) {
+			len_tmp = range->end - (res_cur->end + 1);
+
+			if ((range->end != res_cur->end) && (len_tmp >= res->len)) {
 				debug ("len_tmp = %x\n", len_tmp);
 				if ((len_tmp < len_cur) || (len_cur == 0)) {
 
@@ -1117,8 +1127,9 @@ int ibmphp_check_resource (struct resource_node *res, u8 bridge)
 		if (res_prev) {
 			if (res_prev->rangeno != res_cur->rangeno) {
 				/* 1st device on this range */
-				if ((res_cur->start != range->start) &&
-					((len_tmp = res_cur->start - 1 - range->start) >= res->len)) {
+				len_tmp = res_cur->start - 1 - range->start;
+
+				if ((res_cur->start != range->start) &&	(len_tmp >= res->len)) {
 					if ((len_tmp < len_cur) || (len_cur == 0)) {
 						if ((range->start % tmp_divide) == 0) {
 							/* just perfect, starting address is divisible by length */
@@ -1153,7 +1164,9 @@ int ibmphp_check_resource (struct resource_node *res, u8 bridge)
 				}
 			} else {
 				/* in the same range */
-				if ((len_tmp = res_cur->start - 1 - res_prev->end - 1) >= res->len) {
+				len_tmp = res_cur->start - 1 - res_prev->end - 1;
+
+				if (len_tmp >= res->len) {
 					if ((len_tmp < len_cur) || (len_cur == 0)) {
 						if (((res_prev->end + 1) % tmp_divide) == 0) {
 							/* just perfect, starting address's divisible by length */
@@ -1212,7 +1225,9 @@ int ibmphp_check_resource (struct resource_node *res, u8 bridge)
 				break;
 		}
 		while (range) {
-			if ((len_tmp = range->end - range->start) >= res->len) {
+			len_tmp = range->end - range->start;
+
+			if (len_tmp >= res->len) {
 				if ((len_tmp < len_cur) || (len_cur == 0)) {
 					if ((range->start % tmp_divide) == 0) {
 						/* just perfect, starting address's divisible by length */
@@ -1276,7 +1291,9 @@ int ibmphp_check_resource (struct resource_node *res, u8 bridge)
 					break;
 			}
 			while (range) {
-				if ((len_tmp = range->end - range->start) >= res->len) {
+				len_tmp = range->end - range->start;
+
+				if (len_tmp >= res->len) {
 					if ((len_tmp < len_cur) || (len_cur == 0)) {
 						if ((range->start % tmp_divide) == 0) {
 							/* just perfect, starting address's divisible by length */
@@ -1335,7 +1352,7 @@ int ibmphp_check_resource (struct resource_node *res, u8 bridge)
 				return -EINVAL;
 			}
 		}
-	}	/* end if(!res_cur) */
+	}	/* end if (!res_cur) */
 	return -EINVAL;
 }
 

drivers/pci/hotplug/shpchp_ctrl.c

@@ -195,7 +195,8 @@ static int change_bus_speed(struct controller *ctrl, struct slot *p_slot,
 	int rc = 0;
 
 	ctrl_dbg(ctrl, "Change speed to %d\n", speed);
-	if ((rc = p_slot->hpc_ops->set_bus_speed_mode(p_slot, speed))) {
+	rc = p_slot->hpc_ops->set_bus_speed_mode(p_slot, speed);
+	if (rc) {
 		ctrl_err(ctrl, "%s: Issue of set bus speed mode command failed\n",
 			 __func__);
 		return WRONG_BUS_FREQUENCY;
@@ -261,14 +262,16 @@ static int board_added(struct slot *p_slot)
 	}
 
 	if ((ctrl->pci_dev->vendor == 0x8086) && (ctrl->pci_dev->device == 0x0332)) {
-		if ((rc = p_slot->hpc_ops->set_bus_speed_mode(p_slot, PCI_SPEED_33MHz))) {
+		rc = p_slot->hpc_ops->set_bus_speed_mode(p_slot, PCI_SPEED_33MHz);
+		if (rc) {
 			ctrl_err(ctrl, "%s: Issue of set bus speed mode command failed\n",
 				 __func__);
 			return WRONG_BUS_FREQUENCY;
 		}
 
 		/* turn on board, blink green LED, turn off Amber LED */
-		if ((rc = p_slot->hpc_ops->slot_enable(p_slot))) {
+		rc = p_slot->hpc_ops->slot_enable(p_slot);
+		if (rc) {
 			ctrl_err(ctrl, "Issue of Slot Enable command failed\n");
 			return rc;
 		}
@@ -296,7 +299,8 @@ static int board_added(struct slot *p_slot)
 		return rc;
 
 	/* turn on board, blink green LED, turn off Amber LED */
-	if ((rc = p_slot->hpc_ops->slot_enable(p_slot))) {
+	rc = p_slot->hpc_ops->slot_enable(p_slot);
+	if (rc) {
 		ctrl_err(ctrl, "Issue of Slot Enable command failed\n");
 		return rc;
 	}
@@ -595,7 +599,7 @@ static int shpchp_enable_slot (struct slot *p_slot)
 	ctrl_dbg(ctrl, "%s: p_slot->pwr_save %x\n", __func__, p_slot->pwr_save);
 	p_slot->hpc_ops->get_latch_status(p_slot, &getstatus);
 
-	if(((p_slot->ctrl->pci_dev->vendor == PCI_VENDOR_ID_AMD) ||
+	if (((p_slot->ctrl->pci_dev->vendor == PCI_VENDOR_ID_AMD) ||
 	    (p_slot->ctrl->pci_dev->device == PCI_DEVICE_ID_AMD_POGO_7458))
 	     && p_slot->ctrl->num_slots == 1) {
 		/* handle amd pogo errata; this must be done before enable  */

drivers/pci/hotplug/shpchp_hpc.c

@@ -466,7 +466,8 @@ static int hpc_get_adapter_speed(struct slot *slot, enum pci_bus_speed *value)
 	u8 m66_cap  = !!(slot_reg & MHZ66_CAP);
 	u8 pi, pcix_cap;
 
-	if ((retval = hpc_get_prog_int(slot, &pi)))
+	retval = hpc_get_prog_int(slot, &pi);
+	if (retval)
 		return retval;
 
 	switch (pi) {
@@ -798,7 +799,7 @@ static irqreturn_t shpc_isr(int irq, void *dev_id)
 
 	ctrl_dbg(ctrl, "%s: intr_loc = %x\n", __func__, intr_loc);
 
-	if(!shpchp_poll_mode) {
+	if (!shpchp_poll_mode) {
 		/*
 		 * Mask Global Interrupt Mask - see implementation
 		 * note on p. 139 of SHPC spec rev 1.0

drivers/pci/pci-sysfs.c

@@ -177,7 +177,7 @@ static ssize_t modalias_show(struct device *dev, struct device_attribute *attr,
 {
 	struct pci_dev *pci_dev = to_pci_dev(dev);
 
-	return sprintf(buf, "pci:v%08Xd%08Xsv%08Xsd%08Xbc%02Xsc%02Xi%02x\n",
+	return sprintf(buf, "pci:v%08Xd%08Xsv%08Xsd%08Xbc%02Xsc%02Xi%02X\n",
 		       pci_dev->vendor, pci_dev->device,
 		       pci_dev->subsystem_vendor, pci_dev->subsystem_device,
 		       (u8)(pci_dev->class >> 16), (u8)(pci_dev->class >> 8),

drivers/pci/pci.c

@@ -1003,12 +1003,19 @@ int pci_save_state(struct pci_dev *dev)
 	for (i = 0; i < 16; i++)
 		pci_read_config_dword(dev, i * 4, &dev->saved_config_space[i]);
 	dev->state_saved = true;
-	if ((i = pci_save_pcie_state(dev)) != 0)
+
+	i = pci_save_pcie_state(dev);
+	if (i != 0)
 		return i;
-	if ((i = pci_save_pcix_state(dev)) != 0)
+
+	i = pci_save_pcix_state(dev);
+	if (i != 0)
 		return i;
-	if ((i = pci_save_vc_state(dev)) != 0)
+
+	i = pci_save_vc_state(dev);
+	if (i != 0)
 		return i;
+
 	return 0;
 }
 EXPORT_SYMBOL(pci_save_state);

drivers/pci/quirks.c

@@ -3534,57 +3534,6 @@ DECLARE_PCI_FIXUP_HEADER(0x1283, 0x8892, quirk_use_pcie_bridge_dma_alias);
 /* Intel 82801, https://bugzilla.kernel.org/show_bug.cgi?id=44881#c49 */
 DECLARE_PCI_FIXUP_HEADER(0x8086, 0x244e, quirk_use_pcie_bridge_dma_alias);
 
-static struct pci_dev *pci_func_0_dma_source(struct pci_dev *dev)
-{
-	if (!PCI_FUNC(dev->devfn))
-		return pci_dev_get(dev);
-
-	return pci_get_slot(dev->bus, PCI_DEVFN(PCI_SLOT(dev->devfn), 0));
-}
-
-static const struct pci_dev_dma_source {
-	u16 vendor;
-	u16 device;
-	struct pci_dev *(*dma_source)(struct pci_dev *dev);
-} pci_dev_dma_source[] = {
-	/*
-	 * https://bugzilla.redhat.com/show_bug.cgi?id=605888
-	 *
-	 * Some Ricoh devices use the function 0 source ID for DMA on
-	 * other functions of a multifunction device.  The DMA devices
-	 * is therefore function 0, which will have implications of the
-	 * iommu grouping of these devices.
-	 */
-	{ PCI_VENDOR_ID_RICOH, 0xe822, pci_func_0_dma_source },
-	{ PCI_VENDOR_ID_RICOH, 0xe230, pci_func_0_dma_source },
-	{ PCI_VENDOR_ID_RICOH, 0xe832, pci_func_0_dma_source },
-	{ PCI_VENDOR_ID_RICOH, 0xe476, pci_func_0_dma_source },
-	{ 0 }
-};
-
-/*
- * IOMMUs with isolation capabilities need to be programmed with the
- * correct source ID of a device.  In most cases, the source ID matches
- * the device doing the DMA, but sometimes hardware is broken and will
- * tag the DMA as being sourced from a different device.  This function
- * allows that translation.  Note that the reference count of the
- * returned device is incremented on all paths.
- */
-struct pci_dev *pci_get_dma_source(struct pci_dev *dev)
-{
-	const struct pci_dev_dma_source *i;
-
-	for (i = pci_dev_dma_source; i->dma_source; i++) {
-		if ((i->vendor == dev->vendor ||
-		     i->vendor == (u16)PCI_ANY_ID) &&
-		    (i->device == dev->device ||
-		     i->device == (u16)PCI_ANY_ID))
-			return i->dma_source(dev);
-	}
-
-	return pci_dev_get(dev);
-}
-
 /*
  * AMD has indicated that the devices below do not support peer-to-peer
  * in any system where they are found in the southbridge with an AMD
@@ -3686,6 +3635,21 @@ static int pci_quirk_intel_pch_acs(struct pci_dev *dev, u16 acs_flags)
 	return acs_flags & ~flags ? 0 : 1;
 }
 
+static int pci_quirk_solarflare_acs(struct pci_dev *dev, u16 acs_flags)
+{
+	/*
+	 * SV, TB, and UF are not relevant to multifunction endpoints.
+	 *
+	 * Solarflare indicates that peer-to-peer between functions is not
+	 * possible, therefore RR, CR, and DT are not implemented.  Mask
+	 * these out as if they were clear in the ACS capabilities register.
+	 */
+	acs_flags &= ~(PCI_ACS_SV | PCI_ACS_TB | PCI_ACS_RR |
+		       PCI_ACS_CR | PCI_ACS_UF | PCI_ACS_DT);
+
+	return acs_flags ? 0 : 1;
+}
+
 static const struct pci_dev_acs_enabled {
 	u16 vendor;
 	u16 device;
@@ -3697,6 +3661,8 @@ static const struct pci_dev_acs_enabled {
 	{ PCI_VENDOR_ID_ATI, 0x439d, pci_quirk_amd_sb_acs },
 	{ PCI_VENDOR_ID_ATI, 0x4384, pci_quirk_amd_sb_acs },
 	{ PCI_VENDOR_ID_ATI, 0x4399, pci_quirk_amd_sb_acs },
+	{ PCI_VENDOR_ID_SOLARFLARE, 0x0903, pci_quirk_solarflare_acs },
+	{ PCI_VENDOR_ID_SOLARFLARE, 0x0923, pci_quirk_solarflare_acs },
 	{ PCI_VENDOR_ID_INTEL, PCI_ANY_ID, pci_quirk_intel_pch_acs },
 	{ 0 }
 };

drivers/pci/search.c

@@ -103,40 +103,6 @@ int pci_for_each_dma_alias(struct pci_dev *pdev,
 	return ret;
 }
 
-/*
- * find the upstream PCIe-to-PCI bridge of a PCI device
- * if the device is PCIE, return NULL
- * if the device isn't connected to a PCIe bridge (that is its parent is a
- * legacy PCI bridge and the bridge is directly connected to bus 0), return its
- * parent
- */
-struct pci_dev *pci_find_upstream_pcie_bridge(struct pci_dev *pdev)
-{
-	struct pci_dev *tmp = NULL;
-
-	if (pci_is_pcie(pdev))
-		return NULL;
-	while (1) {
-		if (pci_is_root_bus(pdev->bus))
-			break;
-		pdev = pdev->bus->self;
-		/* a p2p bridge */
-		if (!pci_is_pcie(pdev)) {
-			tmp = pdev;
-			continue;
-		}
-		/* PCI device should connect to a PCIe bridge */
-		if (pci_pcie_type(pdev) != PCI_EXP_TYPE_PCI_BRIDGE) {
-			/* Busted hardware? */
-			WARN_ON_ONCE(1);
-			return NULL;
-		}
-		return pdev;
-	}
-
-	return tmp;
-}
-
 static struct pci_bus *pci_do_find_bus(struct pci_bus *bus, unsigned char busnr)
 {
 	struct pci_bus *child;

include/linux/pci.h

@@ -1557,16 +1557,11 @@ enum pci_fixup_pass {
 
 #ifdef CONFIG_PCI_QUIRKS
 void pci_fixup_device(enum pci_fixup_pass pass, struct pci_dev *dev);
-struct pci_dev *pci_get_dma_source(struct pci_dev *dev);
 int pci_dev_specific_acs_enabled(struct pci_dev *dev, u16 acs_flags);
 void pci_dev_specific_enable_acs(struct pci_dev *dev);
 #else
 static inline void pci_fixup_device(enum pci_fixup_pass pass,
 				    struct pci_dev *dev) { }
-static inline struct pci_dev *pci_get_dma_source(struct pci_dev *dev)
-{
-	return pci_dev_get(dev);
-}
 static inline int pci_dev_specific_acs_enabled(struct pci_dev *dev,
 					       u16 acs_flags)
 {
@@ -1828,17 +1823,6 @@ int pci_for_each_dma_alias(struct pci_dev *pdev,
 			   int (*fn)(struct pci_dev *pdev,
 				     u16 alias, void *data), void *data);
 
-/**
- * pci_find_upstream_pcie_bridge - find upstream PCIe-to-PCI bridge of a device
- * @pdev: the PCI device
- *
- * if the device is PCIE, return NULL
- * if the device isn't connected to a PCIe bridge (that is its parent is a
- * legacy PCI bridge and the bridge is directly connected to bus 0), return its
- * parent
- */
-struct pci_dev *pci_find_upstream_pcie_bridge(struct pci_dev *pdev);
-
 /* helper functions for operation of device flag */
 static inline void pci_set_dev_assigned(struct pci_dev *pdev)
 {