IB/mlx5: Add information for querying IPsec capabilities

Users should be able to query for IPSec support. Adding a few
capabilities bits as part of the driver specific part in
alloc_ucontext:
MLX5_USER_ALLOC_UCONTEXT_FLOW_ACTION_FLAGS_ESP_AES_GCM_REQ_METADATA
	Payload's header is returned with metadata representing the
	IPSec decryption state.
MLX5_USER_ALLOC_UCONTEXT_FLOW_ACTION_FLAGS_ESP_AES_GCM_RX
	Support ESP_AES_GCM in ingress path.
MLX5_USER_ALLOC_UCONTEXT_FLOW_ACTION_FLAGS_ESP_AES_GCM_TX
	Support ESP_AES_GCM in egress path.
MLX5_USER_ALLOC_UCONTEXT_FLOW_ACTION_FLAGS_ESP_AES_GCM_SPI_RSS_ONLY
	Hardware doesn't support matching SPI in flow steering rules
	but just hashing and spreading the traffic accordingly.

Signed-off-by: Aviad Yehezkel <aviadye@mellanox.com>
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

drivers/infiniband/hw/mlx5/main.c

@@ -1681,6 +1681,18 @@ static struct ib_ucontext *mlx5_ib_alloc_ucontext(struct ib_device *ibdev,
 	resp.response_length = min(offsetof(typeof(resp), response_length) +
 				   sizeof(resp.response_length), udata->outlen);
 
+	if (mlx5_accel_ipsec_device_caps(dev->mdev) & MLX5_ACCEL_IPSEC_CAP_DEVICE) {
+		if (mlx5_get_flow_namespace(dev->mdev, MLX5_FLOW_NAMESPACE_EGRESS))
+			resp.flow_action_flags |= MLX5_USER_ALLOC_UCONTEXT_FLOW_ACTION_FLAGS_ESP_AES_GCM;
+		if (mlx5_accel_ipsec_device_caps(dev->mdev) & MLX5_ACCEL_IPSEC_CAP_REQUIRED_METADATA)
+			resp.flow_action_flags |= MLX5_USER_ALLOC_UCONTEXT_FLOW_ACTION_FLAGS_ESP_AES_GCM_REQ_METADATA;
+		if (MLX5_CAP_FLOWTABLE(dev->mdev, flow_table_properties_nic_receive.ft_field_support.outer_esp_spi))
+			resp.flow_action_flags |= MLX5_USER_ALLOC_UCONTEXT_FLOW_ACTION_FLAGS_ESP_AES_GCM_SPI_STEERING;
+		if (mlx5_accel_ipsec_device_caps(dev->mdev) & MLX5_ACCEL_IPSEC_CAP_TX_IV_IS_ESN)
+			resp.flow_action_flags |= MLX5_USER_ALLOC_UCONTEXT_FLOW_ACTION_FLAGS_ESP_AES_GCM_TX_IV_IS_ESN;
+		/* MLX5_USER_ALLOC_UCONTEXT_FLOW_ACTION_FLAGS_ESP_AES_GCM_FULL_OFFLOAD is currently always 0 */
+	}
+
 	context = kzalloc(sizeof(*context), GFP_KERNEL);
 	if (!context)
 		return ERR_PTR(-ENOMEM);

include/uapi/rdma/mlx5-abi.h

@@ -107,6 +107,14 @@ enum mlx5_user_inline_mode {
 	MLX5_USER_INLINE_MODE_TCP_UDP,
 };
 
+enum {
+	MLX5_USER_ALLOC_UCONTEXT_FLOW_ACTION_FLAGS_ESP_AES_GCM = 1 << 0,
+	MLX5_USER_ALLOC_UCONTEXT_FLOW_ACTION_FLAGS_ESP_AES_GCM_REQ_METADATA = 1 << 1,
+	MLX5_USER_ALLOC_UCONTEXT_FLOW_ACTION_FLAGS_ESP_AES_GCM_SPI_STEERING = 1 << 2,
+	MLX5_USER_ALLOC_UCONTEXT_FLOW_ACTION_FLAGS_ESP_AES_GCM_FULL_OFFLOAD = 1 << 3,
+	MLX5_USER_ALLOC_UCONTEXT_FLOW_ACTION_FLAGS_ESP_AES_GCM_TX_IV_IS_ESN = 1 << 4,
+};
+
 struct mlx5_ib_alloc_ucontext_resp {
 	__u32	qp_tab_size;
 	__u32	bf_reg_size;
@@ -118,7 +126,7 @@ struct mlx5_ib_alloc_ucontext_resp {
 	__u32	max_recv_wr;
 	__u32	max_srq_recv_wr;
 	__u16	num_ports;
-	__u16	reserved1;
+	__u16	flow_action_flags;
 	__u32	comp_mask;
 	__u32	response_length;
 	__u8	cqe_version;