Jelajahi Sumber

usb: chipidea: introduce ci_platform_configure

It is used to configure controller parameters according to
platform data, like speed, stream mode, etc, both host and
device's initialization need it, most of code are the
same for both roles, with this new interface, it can reduce
the duplicated code and be easy to maintain in future.

Signed-off-by: Peter Chen <peter.chen@freescale.com>
Peter Chen 10 tahun lalu
induk
melakukan
bf9c85e78d
3 mengubah file dengan 27 tambahan dan 18 penghapusan
  1. 2 0
      drivers/usb/chipidea/ci.h
  2. 24 10
      drivers/usb/chipidea/core.c
  3. 1 8
      drivers/usb/chipidea/host.c

+ 2 - 0
drivers/usb/chipidea/ci.h

@@ -427,4 +427,6 @@ u8 hw_port_test_get(struct ci_hdrc *ci);
 int hw_wait_reg(struct ci_hdrc *ci, enum ci_hw_regs reg, u32 mask,
 				u32 value, unsigned int timeout_ms);
 
+void ci_platform_configure(struct ci_hdrc *ci);
+
 #endif	/* __DRIVERS_USB_CHIPIDEA_CI_H */

+ 24 - 10
drivers/usb/chipidea/core.c

@@ -405,6 +405,28 @@ static int ci_usb_phy_init(struct ci_hdrc *ci)
 	return ret;
 }
 
+
+/**
+ * ci_platform_configure: do controller configure
+ * @ci: the controller
+ *
+ */
+void ci_platform_configure(struct ci_hdrc *ci)
+{
+	if (ci->platdata->flags & CI_HDRC_DISABLE_STREAMING)
+		hw_write(ci, OP_USBMODE, USBMODE_CI_SDIS, USBMODE_CI_SDIS);
+
+	if (ci->platdata->flags & CI_HDRC_FORCE_FULLSPEED) {
+		if (ci->hw_bank.lpm)
+			hw_write(ci, OP_DEVLC, DEVLC_PFSC, DEVLC_PFSC);
+		else
+			hw_write(ci, OP_PORTSC, PORTSC_PFSC, PORTSC_PFSC);
+	}
+
+	if (ci->platdata->flags & CI_HDRC_SET_NON_ZERO_TTHA)
+		hw_write(ci, OP_TTCTRL, TTCTRL_TTHA_MASK, TTCTRL_TTHA);
+}
+
 /**
  * hw_controller_reset: do controller reset
  * @ci: the controller
@@ -449,16 +471,6 @@ int hw_device_reset(struct ci_hdrc *ci)
 		ci->platdata->notify_event(ci,
 			CI_HDRC_CONTROLLER_RESET_EVENT);
 
-	if (ci->platdata->flags & CI_HDRC_DISABLE_STREAMING)
-		hw_write(ci, OP_USBMODE, USBMODE_CI_SDIS, USBMODE_CI_SDIS);
-
-	if (ci->platdata->flags & CI_HDRC_FORCE_FULLSPEED) {
-		if (ci->hw_bank.lpm)
-			hw_write(ci, OP_DEVLC, DEVLC_PFSC, DEVLC_PFSC);
-		else
-			hw_write(ci, OP_PORTSC, PORTSC_PFSC, PORTSC_PFSC);
-	}
-
 	/* USBMODE should be configured step by step */
 	hw_write(ci, OP_USBMODE, USBMODE_CM, USBMODE_CM_IDLE);
 	hw_write(ci, OP_USBMODE, USBMODE_CM, USBMODE_CM_DC);
@@ -471,6 +483,8 @@ int hw_device_reset(struct ci_hdrc *ci)
 		return -ENODEV;
 	}
 
+	ci_platform_configure(ci);
+
 	return 0;
 }
 

+ 1 - 8
drivers/usb/chipidea/host.c

@@ -153,14 +153,7 @@ static int host_start(struct ci_hdrc *ci)
 		}
 	}
 
-	if (ci->platdata->flags & CI_HDRC_DISABLE_STREAMING)
-		hw_write(ci, OP_USBMODE, USBMODE_CI_SDIS, USBMODE_CI_SDIS);
-
-	if (ci->platdata->flags & CI_HDRC_FORCE_FULLSPEED)
-		hw_write(ci, OP_PORTSC, PORTSC_PFSC, PORTSC_PFSC);
-
-	if (ci->platdata->flags & CI_HDRC_SET_NON_ZERO_TTHA)
-		hw_write(ci, OP_TTCTRL, TTCTRL_TTHA_MASK, TTCTRL_TTHA);
+	ci_platform_configure(ci);
 
 	return ret;