Merge branch 'mips-for-linux-next' of git://git.linux-mips.org/pub/scm/ralf/upstream-sfr

Pull MIPS updates from Ralf Baechle:
 - Support for Imgtec's Aptiv family of MIPS cores.
 - Improved detection of BCM47xx configurations.
 - Fix hiberation for certain configurations.
 - Add support for the Chinese Loongson 3 CPU, a MIPS64 R2 core and
   systems.
 - Detection and support for the MIPS P5600 core.
 - A few more random fixes that didn't make 3.14.
 - Support for the EVA Extended Virtual Addressing
 - Switch Alchemy to the platform PATA driver
 - Complete unification of Alchemy support
 - Allow availability of I/O cache coherency to be runtime detected
 - Improvments to multiprocessing support for Imgtec platforms
 - A few microoptimizations
 - Cleanups of FPU support
 - Paul Gortmaker's fixes for the init stuff
 - Support for seccomp

* 'mips-for-linux-next' of git://git.linux-mips.org/pub/scm/ralf/upstream-sfr: (165 commits)
  MIPS: CPC: Use __raw_ memory access functions
  MIPS: CM: use __raw_ memory access functions
  MIPS: Fix warning when including smp-ops.h with CONFIG_SMP=n
  MIPS: Malta: GIC IPIs may be used without MT
  MIPS: smp-mt: Use common GIC IPI implementation
  MIPS: smp-cmp: Remove incorrect core number probe
  MIPS: Fix gigaton of warning building with microMIPS.
  MIPS: Fix core number detection for MT cores
  MIPS: MT: core_nvpes function to retrieve VPE count
  MIPS: Provide empty mips_mt_set_cpuoptions when CONFIG_MIPS_MT=n
  MIPS: Lasat: Replace del_timer by del_timer_sync
  MIPS: Malta: Setup PM I/O region on boot
  MIPS: Loongson: Add a Loongson-3 default config file
  MIPS: Loongson 3: Add CPU hotplug support
  MIPS: Loongson 3: Add Loongson-3 SMP support
  MIPS: Loongson: Add Loongson-3 Kconfig options
  MIPS: Loongson: Add swiotlb to support All-Memory DMA
  MIPS: Loongson 3: Add serial port support
  MIPS: Loongson 3: Add IRQ init and dispatch support
  MIPS: Loongson 3: Add HT-linked PCI support
  ...

arch/mips/Kconfig

@@ -10,6 +10,7 @@ config MIPS
 	select HAVE_PERF_EVENTS
 	select PERF_USE_VMALLOC
 	select HAVE_ARCH_KGDB
+	select HAVE_ARCH_SECCOMP_FILTER
 	select HAVE_ARCH_TRACEHOOK
 	select ARCH_HAVE_CUSTOM_GPIO_H
 	select HAVE_FUNCTION_TRACER
@@ -62,6 +63,7 @@ config MIPS_ALCHEMY
 	select CEVT_R4K
 	select CSRC_R4K
 	select IRQ_CPU
+	select DMA_MAYBE_COHERENT	# Au1000,1500,1100 aren't, rest is
 	select SYS_HAS_CPU_MIPS32_R1
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_APM_EMULATION
@@ -121,7 +123,7 @@ config BCM47XX
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 	select SYS_HAS_EARLY_PRINTK
-	select EARLY_PRINTK_8250 if EARLY_PRINTK
+	select USE_GENERIC_EARLY_PRINTK_8250
 	help
 	 Support for BCM47XX based boards
 
@@ -148,7 +150,6 @@ config MIPS_COBALT
 	select CSRC_R4K
 	select CEVT_GT641XX
 	select DMA_NONCOHERENT
-	select EARLY_PRINTK_8250 if EARLY_PRINTK
 	select HW_HAS_PCI
 	select I8253
 	select I8259
@@ -161,6 +162,7 @@ config MIPS_COBALT
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_64BIT_KERNEL
 	select SYS_SUPPORTS_LITTLE_ENDIAN
+	select USE_GENERIC_EARLY_PRINTK_8250
 
 config MACH_DECSTATION
 	bool "DECstations"
@@ -233,7 +235,6 @@ config MACH_JZ4740
 	select IRQ_CPU
 	select ARCH_REQUIRE_GPIOLIB
 	select SYS_HAS_EARLY_PRINTK
-	select HAVE_PWM
 	select HAVE_CLK
 	select GENERIC_IRQ_CHIP
 
@@ -318,6 +319,7 @@ config MIPS_MALTA
 	select SWAP_IO_SPACE
 	select SYS_HAS_CPU_MIPS32_R1
 	select SYS_HAS_CPU_MIPS32_R2
+	select SYS_HAS_CPU_MIPS32_R3_5
 	select SYS_HAS_CPU_MIPS64_R1
 	select SYS_HAS_CPU_MIPS64_R2
 	select SYS_HAS_CPU_NEVADA
@@ -327,6 +329,7 @@ config MIPS_MALTA
 	select SYS_SUPPORTS_BIG_ENDIAN
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 	select SYS_SUPPORTS_MIPS_CMP
+	select SYS_SUPPORTS_MIPS_CPS
 	select SYS_SUPPORTS_MULTITHREADING
 	select SYS_SUPPORTS_SMARTMIPS
 	select SYS_SUPPORTS_ZBOOT
@@ -671,6 +674,7 @@ config SNI_RM
 	select SYS_SUPPORTS_BIG_ENDIAN
 	select SYS_SUPPORTS_HIGHMEM
 	select SYS_SUPPORTS_LITTLE_ENDIAN
+	select USE_GENERIC_EARLY_PRINTK_8250
 	help
 	  The SNI RM200/300/400 are MIPS-based machines manufactured by
 	  Siemens Nixdorf Informationssysteme (SNI), parent company of Pyramid
@@ -775,7 +779,6 @@ config NLM_XLP_BOARD
 	select CEVT_R4K
 	select CSRC_R4K
 	select IRQ_CPU
-	select ARCH_SUPPORTS_MSI
 	select ZONE_DMA32 if 64BIT
 	select SYNC_R4K
 	select SYS_HAS_EARLY_PRINTK
@@ -861,6 +864,7 @@ config CEVT_R4K
 	bool
 
 config CEVT_GIC
+	select MIPS_CM
 	bool
 
 config CEVT_SB1250
@@ -879,6 +883,7 @@ config CSRC_R4K
 	bool
 
 config CSRC_GIC
+	select MIPS_CM
 	bool
 
 config CSRC_SB1250
@@ -1023,6 +1028,7 @@ config IRQ_GT641XX
 	bool
 
 config IRQ_GIC
+	select MIPS_CM
 	bool
 
 config PCI_GT64XXX_PCI0
@@ -1141,6 +1147,18 @@ choice
 	prompt "CPU type"
 	default CPU_R4X00
 
+config CPU_LOONGSON3
+	bool "Loongson 3 CPU"
+	depends on SYS_HAS_CPU_LOONGSON3
+	select CPU_SUPPORTS_64BIT_KERNEL
+	select CPU_SUPPORTS_HIGHMEM
+	select CPU_SUPPORTS_HUGEPAGES
+	select WEAK_ORDERING
+	select WEAK_REORDERING_BEYOND_LLSC
+	help
+		The Loongson 3 processor implements the MIPS64R2 instruction
+		set with many extensions.
+
 config CPU_LOONGSON2E
 	bool "Loongson 2E"
 	depends on SYS_HAS_CPU_LOONGSON2E
@@ -1196,6 +1214,7 @@ config CPU_MIPS32_R2
 	select CPU_HAS_PREFETCH
 	select CPU_SUPPORTS_32BIT_KERNEL
 	select CPU_SUPPORTS_HIGHMEM
+	select CPU_SUPPORTS_MSA
 	select HAVE_KVM
 	help
 	  Choose this option to build a kernel for release 2 or later of the
@@ -1231,6 +1250,7 @@ config CPU_MIPS64_R2
 	select CPU_SUPPORTS_64BIT_KERNEL
 	select CPU_SUPPORTS_HIGHMEM
 	select CPU_SUPPORTS_HUGEPAGES
+	select CPU_SUPPORTS_MSA
 	help
 	  Choose this option to build a kernel for release 2 or later of the
 	  MIPS64 architecture.  Many modern embedded systems with a 64-bit
@@ -1389,7 +1409,6 @@ config CPU_CAVIUM_OCTEON
 	select LIBFDT
 	select USE_OF
 	select USB_EHCI_BIG_ENDIAN_MMIO
-	select SYS_HAS_DMA_OPS
 	select MIPS_L1_CACHE_SHIFT_7
 	help
 	  The Cavium Octeon processor is a highly integrated chip containing
@@ -1441,6 +1460,26 @@ config CPU_XLP
 	  Netlogic Microsystems XLP processors.
 endchoice
 
+config CPU_MIPS32_3_5_FEATURES
+	bool "MIPS32 Release 3.5 Features"
+	depends on SYS_HAS_CPU_MIPS32_R3_5
+	depends on CPU_MIPS32_R2
+	help
+	  Choose this option to build a kernel for release 2 or later of the
+	  MIPS32 architecture including features from the 3.5 release such as
+	  support for Enhanced Virtual Addressing (EVA).
+
+config CPU_MIPS32_3_5_EVA
+	bool "Enhanced Virtual Addressing (EVA)"
+	depends on CPU_MIPS32_3_5_FEATURES
+	select EVA
+	default y
+	help
+	  Choose this option if you want to enable the Enhanced Virtual
+	  Addressing (EVA) on your MIPS32 core (such as proAptiv).
+	  One of its primary benefits is an increase in the maximum size
+	  of lowmem (up to 3GB). If unsure, say 'N' here.
+
 if CPU_LOONGSON2F
 config CPU_NOP_WORKAROUNDS
 	bool
@@ -1516,6 +1555,10 @@ config CPU_BMIPS5000
 	select SYS_SUPPORTS_SMP
 	select SYS_SUPPORTS_HOTPLUG_CPU
 
+config SYS_HAS_CPU_LOONGSON3
+	bool
+	select CPU_SUPPORTS_CPUFREQ
+
 config SYS_HAS_CPU_LOONGSON2E
 	bool
 
@@ -1534,6 +1577,9 @@ config SYS_HAS_CPU_MIPS32_R1
 config SYS_HAS_CPU_MIPS32_R2
 	bool
 
+config SYS_HAS_CPU_MIPS32_R3_5
+	bool
+
 config SYS_HAS_CPU_MIPS64_R1
 	bool
 
@@ -1650,6 +1696,9 @@ config CPU_MIPSR2
 	bool
 	default y if CPU_MIPS32_R2 || CPU_MIPS64_R2 || CPU_CAVIUM_OCTEON
 
+config EVA
+	bool
+
 config SYS_SUPPORTS_32BIT_KERNEL
 	bool
 config SYS_SUPPORTS_64BIT_KERNEL
@@ -1722,7 +1771,7 @@ choice
 
 config PAGE_SIZE_4KB
 	bool "4kB"
-	depends on !CPU_LOONGSON2
+	depends on !CPU_LOONGSON2 && !CPU_LOONGSON3
 	help
 	 This option select the standard 4kB Linux page size.  On some
 	 R3000-family processors this is the only available page size.  Using
@@ -1863,6 +1912,7 @@ config MIPS_MT_SMP
 	select CPU_MIPSR2_IRQ_VI
 	select CPU_MIPSR2_IRQ_EI
 	select SYNC_R4K
+	select MIPS_GIC_IPI
 	select MIPS_MT
 	select SMP
 	select SMP_UP
@@ -1880,6 +1930,7 @@ config MIPS_MT_SMTC
 	bool "Use all TCs on all VPEs for SMP (DEPRECATED)"
 	depends on CPU_MIPS32_R2
 	depends on SYS_SUPPORTS_MULTITHREADING
+	depends on !MIPS_CPS
 	select CPU_MIPSR2_IRQ_VI
 	select CPU_MIPSR2_IRQ_EI
 	select MIPS_MT
@@ -1987,13 +2038,45 @@ config MIPS_VPE_APSP_API_MT
 	depends on MIPS_VPE_APSP_API && !MIPS_CMP
 
 config MIPS_CMP
-	bool "MIPS CMP support"
-	depends on SYS_SUPPORTS_MIPS_CMP && MIPS_MT_SMP
+	bool "MIPS CMP framework support (DEPRECATED)"
+	depends on SYS_SUPPORTS_MIPS_CMP && !MIPS_MT_SMTC
+	select MIPS_GIC_IPI
 	select SYNC_R4K
 	select WEAK_ORDERING
 	default n
 	help
-	  Enable Coherency Manager processor (CMP) support.
+	  Select this if you are using a bootloader which implements the "CMP
+	  framework" protocol (ie. YAMON) and want your kernel to make use of
+	  its ability to start secondary CPUs.
+
+	  Unless you have a specific need, you should use CONFIG_MIPS_CPS
+	  instead of this.
+
+config MIPS_CPS
+	bool "MIPS Coherent Processing System support"
+	depends on SYS_SUPPORTS_MIPS_CPS
+	select MIPS_CM
+	select MIPS_CPC
+	select MIPS_GIC_IPI
+	select SMP
+	select SYNC_R4K if (CEVT_R4K || CSRC_R4K)
+	select SYS_SUPPORTS_SMP
+	select WEAK_ORDERING
+	help
+	  Select this if you wish to run an SMP kernel across multiple cores
+	  within a MIPS Coherent Processing System. When this option is
+	  enabled the kernel will probe for other cores and boot them with
+	  no external assistance. It is safe to enable this when hardware
+	  support is unavailable.
+
+config MIPS_GIC_IPI
+	bool
+
+config MIPS_CM
+	bool
+
+config MIPS_CPC
+	bool
 
 config SB1_PASS_1_WORKAROUNDS
 	bool
@@ -2036,6 +2119,21 @@ config CPU_MICROMIPS
 	  When this option is enabled the kernel will be built using the
 	  microMIPS ISA
 
+config CPU_HAS_MSA
+	bool "Support for the MIPS SIMD Architecture"
+	depends on CPU_SUPPORTS_MSA
+	default y
+	help
+	  MIPS SIMD Architecture (MSA) introduces 128 bit wide vector registers
+	  and a set of SIMD instructions to operate on them. When this option
+	  is enabled the kernel will support allocating & switching MSA
+	  vector register contexts. If you know that your kernel will only be
+	  running on CPUs which do not support MSA or that your userland will
+	  not be making use of it then you may wish to say N here to reduce
+	  the size & complexity of your kernel.
+
+	  If unsure, say Y.
+
 config CPU_HAS_WB
 	bool
 
@@ -2087,7 +2185,7 @@ config CPU_R4400_WORKAROUNDS
 #
 config HIGHMEM
 	bool "High Memory Support"
-	depends on 32BIT && CPU_SUPPORTS_HIGHMEM && SYS_SUPPORTS_HIGHMEM
+	depends on 32BIT && CPU_SUPPORTS_HIGHMEM && SYS_SUPPORTS_HIGHMEM && !CPU_MIPS32_3_5_EVA
 
 config CPU_SUPPORTS_HIGHMEM
 	bool
@@ -2101,6 +2199,9 @@ config SYS_SUPPORTS_SMARTMIPS
 config SYS_SUPPORTS_MICROMIPS
 	bool
 
+config CPU_SUPPORTS_MSA
+	bool
+
 config ARCH_FLATMEM_ENABLE
 	def_bool y
 	depends on !NUMA && !CPU_LOONGSON2
@@ -2174,6 +2275,9 @@ config SMP_UP
 config SYS_SUPPORTS_MIPS_CMP
 	bool
 
+config SYS_SUPPORTS_MIPS_CPS
+	bool
+
 config SYS_SUPPORTS_SMP
 	bool
 
@@ -2406,6 +2510,17 @@ config PCI
 	  your box. Other bus systems are ISA, EISA, or VESA. If you have PCI,
 	  say Y, otherwise N.
 
+config HT_PCI
+	bool "Support for HT-linked PCI"
+	default y
+	depends on CPU_LOONGSON3
+	select PCI
+	select PCI_DOMAINS
+	help
+	  Loongson family machines use Hyper-Transport bus for inter-core
+	  connection and device connection. The PCI bus is a subordinate
+	  linked at HT. Choose Y for Loongson-3 based machines.
+
 config PCI_DOMAINS
 	bool
 

arch/mips/Kconfig.debug

@@ -21,13 +21,17 @@ config EARLY_PRINTK
 	  unless you want to debug such a crash.
 
 config EARLY_PRINTK_8250
-	bool "8250/16550 and compatible serial early printk driver"
-	depends on EARLY_PRINTK
-	default n
+	bool
+	depends on EARLY_PRINTK && USE_GENERIC_EARLY_PRINTK_8250
+	default y
 	help
+	  "8250/16550 and compatible serial early printk driver"
 	  If you say Y here, it will be possible to use a 8250/16550 serial
 	  port as the boot console.
 
+config USE_GENERIC_EARLY_PRINTK_8250
+	bool
+
 config CMDLINE_BOOL
 	bool "Built-in kernel command line"
 	default n

arch/mips/Makefile

@@ -119,6 +119,11 @@ cflags-$(CONFIG_CPU_MICROMIPS) += $(call cc-option,-mmicromips)
 cflags-$(CONFIG_SB1XXX_CORELIS)	+= $(call cc-option,-mno-sched-prolog) \
 				   -fno-omit-frame-pointer
 
+ifeq ($(CONFIG_CPU_HAS_MSA),y)
+toolchain-msa			:= $(call cc-option-yn,-mhard-float -mfp64 -mmsa)
+cflags-$(toolchain-msa)		+= -DTOOLCHAIN_SUPPORTS_MSA
+endif
+
 #
 # CPU-dependent compiler/assembler options for optimization.
 #

arch/mips/alchemy/Kconfig

@@ -16,36 +16,29 @@ config ALCHEMY_GPIO_INDIRECT
 choice
 	prompt "Machine type"
 	depends on MIPS_ALCHEMY
-	default MIPS_DB1000
+	default MIPS_DB1XXX
 
 config MIPS_MTX1
 	bool "4G Systems MTX-1 board"
-	select DMA_NONCOHERENT
 	select HW_HAS_PCI
 	select ALCHEMY_GPIOINT_AU1000
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 	select SYS_HAS_EARLY_PRINTK
 
-config MIPS_DB1000
-	bool "Alchemy DB1000/DB1500/DB1100 PB1500/1100 boards"
-	select ALCHEMY_GPIOINT_AU1000
-	select DMA_NONCOHERENT
-	select HW_HAS_PCI
-	select SYS_SUPPORTS_BIG_ENDIAN
-	select SYS_SUPPORTS_LITTLE_ENDIAN
-	select SYS_HAS_EARLY_PRINTK
-
-config MIPS_DB1235
-	bool "Alchemy DB1200/PB1200/DB1300/DB1550/PB1550 boards"
+config MIPS_DB1XXX
+	bool "Alchemy DB1XXX / PB1XXX boards"
 	select ARCH_REQUIRE_GPIOLIB
 	select HW_HAS_PCI
-	select DMA_COHERENT
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 	select SYS_HAS_EARLY_PRINTK
+	help
+	  Select this option if you have one of the following Alchemy
+	  development boards:  DB1000 DB1500 DB1100 DB1550 DB1200 DB1300
+			       PB1500 PB1100 PB1550 PB1200
+	  Board type is autodetected during boot.
 
 config MIPS_XXS1500
 	bool "MyCable XXS1500 board"
-	select DMA_NONCOHERENT
 	select ALCHEMY_GPIOINT_AU1000
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 	select SYS_HAS_EARLY_PRINTK
@@ -54,7 +47,6 @@ config MIPS_GPR
 	bool "Trapeze ITS GPR board"
 	select ALCHEMY_GPIOINT_AU1000
 	select HW_HAS_PCI
-	select DMA_NONCOHERENT
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 	select SYS_HAS_EARLY_PRINTK
 

arch/mips/alchemy/Platform

@@ -5,18 +5,12 @@ platform-$(CONFIG_MIPS_ALCHEMY) += alchemy/common/
 
 
 #
-# AMD Alchemy Db1000/Db1500/Pb1500/Db1100/Pb1100 eval boards
+# AMD Alchemy Db1000/Db1500/Pb1500/Db1100/Pb1100
+#             Db1550/Pb1550/Db1200/Pb1200/Db1300
 #
-platform-$(CONFIG_MIPS_DB1000)	+= alchemy/devboards/
-cflags-$(CONFIG_MIPS_DB1000)	+= -I$(srctree)/arch/mips/include/asm/mach-db1x00
-load-$(CONFIG_MIPS_DB1000)	+= 0xffffffff80100000
-
-#
-# AMD Alchemy Db1200/Pb1200/Db1550/Pb1550/Db1300 eval boards
-#
-platform-$(CONFIG_MIPS_DB1235)	+= alchemy/devboards/
-cflags-$(CONFIG_MIPS_DB1235)	+= -I$(srctree)/arch/mips/include/asm/mach-db1x00
-load-$(CONFIG_MIPS_DB1235)	+= 0xffffffff80100000
+platform-$(CONFIG_MIPS_DB1XXX)	+= alchemy/devboards/
+cflags-$(CONFIG_MIPS_DB1XXX)	+= -I$(srctree)/arch/mips/include/asm/mach-db1x00
+load-$(CONFIG_MIPS_DB1XXX)	+= 0xffffffff80100000
 
 #
 # 4G-Systems MTX-1 "MeshCube" wireless router

arch/mips/alchemy/common/setup.c

@@ -30,6 +30,7 @@
 #include <linux/jiffies.h>
 #include <linux/module.h>
 
+#include <asm/dma-coherence.h>
 #include <asm/mipsregs.h>
 #include <asm/time.h>
 
@@ -59,6 +60,15 @@ void __init plat_mem_setup(void)
 		/* Clear to obtain best system bus performance */
 		clear_c0_config(1 << 19); /* Clear Config[OD] */
 
+	hw_coherentio = 0;
+	coherentio = 1;
+	switch (alchemy_get_cputype()) {
+	case ALCHEMY_CPU_AU1000:
+	case ALCHEMY_CPU_AU1500:
+	case ALCHEMY_CPU_AU1100:
+		coherentio = 0;
+	}
+
 	board_setup();	/* board specific setup */
 
 	/* IO/MEM resources. */

arch/mips/alchemy/common/sleeper.S

@@ -95,7 +95,7 @@ LEAF(alchemy_sleep_au1000)
 
 	/* cache following instructions, as memory gets put to sleep */
 	la	t0, 1f
-	.set	mips3
+	.set	arch=r4000
 	cache	0x14, 0(t0)
 	cache	0x14, 32(t0)
 	cache	0x14, 64(t0)
@@ -121,7 +121,7 @@ LEAF(alchemy_sleep_au1550)
 
 	/* cache following instructions, as memory gets put to sleep */
 	la	t0, 1f
-	.set	mips3
+	.set	arch=r4000
 	cache	0x14, 0(t0)
 	cache	0x14, 32(t0)
 	cache	0x14, 64(t0)
@@ -163,7 +163,7 @@ LEAF(alchemy_sleep_au1300)
 	la	t1, 4f
 	subu	t2, t1, t0
 
-	.set	mips3
+	.set	arch=r4000
 
 1:	cache	0x14, 0(t0)
 	subu	t2, t2, 32

arch/mips/alchemy/devboards/Makefile

@@ -2,7 +2,5 @@
 # Alchemy Develboards
 #
 
-obj-y += bcsr.o platform.o
+obj-y += bcsr.o platform.o db1000.o db1200.o db1300.o db1550.o db1xxx.o
 obj-$(CONFIG_PM)		+= pm.o
-obj-$(CONFIG_MIPS_DB1000)	+= db1000.o
-obj-$(CONFIG_MIPS_DB1235)	+= db1235.o db1200.o db1300.o db1550.o

arch/mips/alchemy/devboards/db1000.c

@@ -41,42 +41,27 @@
 
 #define F_SWAPPED (bcsr_read(BCSR_STATUS) & BCSR_STATUS_DB1000_SWAPBOOT)
 
-struct pci_dev;
+const char *get_system_type(void);
 
-static const char *board_type_str(void)
+int __init db1000_board_setup(void)
 {
+	/* initialize board register space */
+	bcsr_init(DB1000_BCSR_PHYS_ADDR,
+		  DB1000_BCSR_PHYS_ADDR + DB1000_BCSR_HEXLED_OFS);
+
 	switch (BCSR_WHOAMI_BOARD(bcsr_read(BCSR_WHOAMI))) {
 	case BCSR_WHOAMI_DB1000:
-		return "DB1000";
 	case BCSR_WHOAMI_DB1500:
-		return "DB1500";
 	case BCSR_WHOAMI_DB1100:
-		return "DB1100";
 	case BCSR_WHOAMI_PB1500:
 	case BCSR_WHOAMI_PB1500R2:
-		return "PB1500";
 	case BCSR_WHOAMI_PB1100:
-		return "PB1100";
-	default:
-		return "(unknown)";
+		pr_info("AMD Alchemy %s Board\n", get_system_type());
+		return 0;
 	}
+	return -ENODEV;
 }
 
-const char *get_system_type(void)
-{
-	return board_type_str();
-}
-
-void __init board_setup(void)
-{
-	/* initialize board register space */
-	bcsr_init(DB1000_BCSR_PHYS_ADDR,
-		  DB1000_BCSR_PHYS_ADDR + DB1000_BCSR_HEXLED_OFS);
-
-	printk(KERN_INFO "AMD Alchemy %s Board\n", board_type_str());
-}
-
-
 static int db1500_map_pci_irq(const struct pci_dev *d, u8 slot, u8 pin)
 {
 	if ((slot < 12) || (slot > 13) || pin == 0)
@@ -114,17 +99,10 @@ static struct platform_device db1500_pci_host_dev = {
 	.resource	= alchemy_pci_host_res,
 };
 
-static int __init db1500_pci_init(void)
+int __init db1500_pci_setup(void)
 {
-	int id = BCSR_WHOAMI_BOARD(bcsr_read(BCSR_WHOAMI));
-	if ((id == BCSR_WHOAMI_DB1500) || (id == BCSR_WHOAMI_PB1500) ||
-	    (id == BCSR_WHOAMI_PB1500R2))
-		return platform_device_register(&db1500_pci_host_dev);
-	return 0;
+	return platform_device_register(&db1500_pci_host_dev);
 }
-/* must be arch_initcall; MIPS PCI scans busses in a subsys_initcall */
-arch_initcall(db1500_pci_init);
-
 
 static struct resource au1100_lcd_resources[] = {
 	[0] = {
@@ -513,7 +491,7 @@ static struct platform_device *db1100_devs[] = {
 	&db1000_irda_dev,
 };
 
-static int __init db1000_dev_init(void)
+int __init db1000_dev_setup(void)
 {
 	int board = BCSR_WHOAMI_BOARD(bcsr_read(BCSR_WHOAMI));
 	int c0, c1, d0, d1, s0, s1, flashsize = 32,  twosocks = 1;
@@ -623,4 +601,3 @@ static int __init db1000_dev_init(void)
 	db1x_register_norflash(flashsize << 20, 4 /* 32bit */, F_SWAPPED);
 	return 0;
 }
-device_initcall(db1000_dev_init);

arch/mips/alchemy/devboards/db1200.c

@@ -35,16 +35,63 @@
 #include <linux/spi/spi.h>
 #include <linux/spi/flash.h>
 #include <linux/smc91x.h>
+#include <linux/ata_platform.h>
 #include <asm/mach-au1x00/au1000.h>
 #include <asm/mach-au1x00/au1100_mmc.h>
 #include <asm/mach-au1x00/au1xxx_dbdma.h>
+#include <asm/mach-au1x00/au1xxx_psc.h>
 #include <asm/mach-au1x00/au1200fb.h>
 #include <asm/mach-au1x00/au1550_spi.h>
 #include <asm/mach-db1x00/bcsr.h>
-#include <asm/mach-db1x00/db1200.h>
 
 #include "platform.h"
 
+#define BCSR_INT_IDE		0x0001
+#define BCSR_INT_ETH		0x0002
+#define BCSR_INT_PC0		0x0004
+#define BCSR_INT_PC0STSCHG	0x0008
+#define BCSR_INT_PC1		0x0010
+#define BCSR_INT_PC1STSCHG	0x0020
+#define BCSR_INT_DC		0x0040
+#define BCSR_INT_FLASHBUSY	0x0080
+#define BCSR_INT_PC0INSERT	0x0100
+#define BCSR_INT_PC0EJECT	0x0200
+#define BCSR_INT_PC1INSERT	0x0400
+#define BCSR_INT_PC1EJECT	0x0800
+#define BCSR_INT_SD0INSERT	0x1000
+#define BCSR_INT_SD0EJECT	0x2000
+#define BCSR_INT_SD1INSERT	0x4000
+#define BCSR_INT_SD1EJECT	0x8000
+
+#define DB1200_IDE_PHYS_ADDR	0x18800000
+#define DB1200_IDE_REG_SHIFT	5
+#define DB1200_IDE_PHYS_LEN	(16 << DB1200_IDE_REG_SHIFT)
+#define DB1200_ETH_PHYS_ADDR	0x19000300
+#define DB1200_NAND_PHYS_ADDR	0x20000000
+
+#define PB1200_IDE_PHYS_ADDR	0x0C800000
+#define PB1200_ETH_PHYS_ADDR	0x0D000300
+#define PB1200_NAND_PHYS_ADDR	0x1C000000
+
+#define DB1200_INT_BEGIN	(AU1000_MAX_INTR + 1)
+#define DB1200_IDE_INT		(DB1200_INT_BEGIN + 0)
+#define DB1200_ETH_INT		(DB1200_INT_BEGIN + 1)
+#define DB1200_PC0_INT		(DB1200_INT_BEGIN + 2)
+#define DB1200_PC0_STSCHG_INT	(DB1200_INT_BEGIN + 3)
+#define DB1200_PC1_INT		(DB1200_INT_BEGIN + 4)
+#define DB1200_PC1_STSCHG_INT	(DB1200_INT_BEGIN + 5)
+#define DB1200_DC_INT		(DB1200_INT_BEGIN + 6)
+#define DB1200_FLASHBUSY_INT	(DB1200_INT_BEGIN + 7)
+#define DB1200_PC0_INSERT_INT	(DB1200_INT_BEGIN + 8)
+#define DB1200_PC0_EJECT_INT	(DB1200_INT_BEGIN + 9)
+#define DB1200_PC1_INSERT_INT	(DB1200_INT_BEGIN + 10)
+#define DB1200_PC1_EJECT_INT	(DB1200_INT_BEGIN + 11)
+#define DB1200_SD0_INSERT_INT	(DB1200_INT_BEGIN + 12)
+#define DB1200_SD0_EJECT_INT	(DB1200_INT_BEGIN + 13)
+#define PB1200_SD1_INSERT_INT	(DB1200_INT_BEGIN + 14)
+#define PB1200_SD1_EJECT_INT	(DB1200_INT_BEGIN + 15)
+#define DB1200_INT_END		(DB1200_INT_BEGIN + 15)
+
 const char *get_system_type(void);
 
 static int __init db1200_detect_board(void)
@@ -89,6 +136,15 @@ int __init db1200_board_setup(void)
 		return -ENODEV;
 
 	whoami = bcsr_read(BCSR_WHOAMI);
+	switch (BCSR_WHOAMI_BOARD(whoami)) {
+	case BCSR_WHOAMI_PB1200_DDR1:
+	case BCSR_WHOAMI_PB1200_DDR2:
+	case BCSR_WHOAMI_DB1200:
+		break;
+	default:
+		return -ENODEV;
+	}
+
 	printk(KERN_INFO "Alchemy/AMD/RMI %s Board, CPLD Rev %d"
 		"  Board-ID %d	Daughtercard ID %d\n", get_system_type(),
 		(whoami >> 4) & 0xf, (whoami >> 8) & 0xf, whoami & 0xf);
@@ -275,32 +331,38 @@ static struct platform_device db1200_eth_dev = {
 
 /**********************************************************************/
 
+static struct pata_platform_info db1200_ide_info = {
+	.ioport_shift	= DB1200_IDE_REG_SHIFT,
+};
+
+#define IDE_ALT_START	(14 << DB1200_IDE_REG_SHIFT)
 static struct resource db1200_ide_res[] = {
 	[0] = {
 		.start	= DB1200_IDE_PHYS_ADDR,
-		.end	= DB1200_IDE_PHYS_ADDR + DB1200_IDE_PHYS_LEN - 1,
+		.end	= DB1200_IDE_PHYS_ADDR + IDE_ALT_START - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
+		.start	= DB1200_IDE_PHYS_ADDR + IDE_ALT_START,
+		.end	= DB1200_IDE_PHYS_ADDR + DB1200_IDE_PHYS_LEN - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[2] = {
 		.start	= DB1200_IDE_INT,
 		.end	= DB1200_IDE_INT,
 		.flags	= IORESOURCE_IRQ,
 	},
-	[2] = {
-		.start	= AU1200_DSCR_CMD0_DMA_REQ1,
-		.end	= AU1200_DSCR_CMD0_DMA_REQ1,
-		.flags	= IORESOURCE_DMA,
-	},
 };
 
 static u64 au1200_ide_dmamask = DMA_BIT_MASK(32);
 
 static struct platform_device db1200_ide_dev = {
-	.name		= "au1200-ide",
+	.name		= "pata_platform",
 	.id		= 0,
 	.dev = {
 		.dma_mask		= &au1200_ide_dmamask,
 		.coherent_dma_mask	= DMA_BIT_MASK(32),
+		.platform_data		= &db1200_ide_info,
 	},
 	.num_resources	= ARRAY_SIZE(db1200_ide_res),
 	.resource	= db1200_ide_res,

arch/mips/alchemy/devboards/db1300.c

@@ -26,12 +26,44 @@
 #include <asm/mach-au1x00/au1200fb.h>
 #include <asm/mach-au1x00/au1xxx_dbdma.h>
 #include <asm/mach-au1x00/au1xxx_psc.h>
-#include <asm/mach-db1x00/db1300.h>
 #include <asm/mach-db1x00/bcsr.h>
 #include <asm/mach-au1x00/prom.h>
 
 #include "platform.h"
 
+/* FPGA (external mux) interrupt sources */
+#define DB1300_FIRST_INT	(ALCHEMY_GPIC_INT_LAST + 1)
+#define DB1300_IDE_INT		(DB1300_FIRST_INT + 0)
+#define DB1300_ETH_INT		(DB1300_FIRST_INT + 1)
+#define DB1300_CF_INT		(DB1300_FIRST_INT + 2)
+#define DB1300_VIDEO_INT	(DB1300_FIRST_INT + 4)
+#define DB1300_HDMI_INT		(DB1300_FIRST_INT + 5)
+#define DB1300_DC_INT		(DB1300_FIRST_INT + 6)
+#define DB1300_FLASH_INT	(DB1300_FIRST_INT + 7)
+#define DB1300_CF_INSERT_INT	(DB1300_FIRST_INT + 8)
+#define DB1300_CF_EJECT_INT	(DB1300_FIRST_INT + 9)
+#define DB1300_AC97_INT		(DB1300_FIRST_INT + 10)
+#define DB1300_AC97_PEN_INT	(DB1300_FIRST_INT + 11)
+#define DB1300_SD1_INSERT_INT	(DB1300_FIRST_INT + 12)
+#define DB1300_SD1_EJECT_INT	(DB1300_FIRST_INT + 13)
+#define DB1300_OTG_VBUS_OC_INT	(DB1300_FIRST_INT + 14)
+#define DB1300_HOST_VBUS_OC_INT (DB1300_FIRST_INT + 15)
+#define DB1300_LAST_INT		(DB1300_FIRST_INT + 15)
+
+/* SMSC9210 CS */
+#define DB1300_ETH_PHYS_ADDR	0x19000000
+#define DB1300_ETH_PHYS_END	0x197fffff
+
+/* ATA CS */
+#define DB1300_IDE_PHYS_ADDR	0x18800000
+#define DB1300_IDE_REG_SHIFT	5
+#define DB1300_IDE_PHYS_LEN	(16 << DB1300_IDE_REG_SHIFT)
+
+/* NAND CS */
+#define DB1300_NAND_PHYS_ADDR	0x20000000
+#define DB1300_NAND_PHYS_END	0x20000fff
+
+
 static struct i2c_board_info db1300_i2c_devs[] __initdata = {
 	{ I2C_BOARD_INFO("wm8731", 0x1b), },	/* I2S audio codec */
 	{ I2C_BOARD_INFO("ne1619", 0x2d), },	/* adm1025-compat hwmon */
@@ -759,11 +791,15 @@ int __init db1300_board_setup(void)
 {
 	unsigned short whoami;
 
-	db1300_gpio_config();
 	bcsr_init(DB1300_BCSR_PHYS_ADDR,
 		  DB1300_BCSR_PHYS_ADDR + DB1300_BCSR_HEXLED_OFS);
 
 	whoami = bcsr_read(BCSR_WHOAMI);
+	if (BCSR_WHOAMI_BOARD(whoami) != BCSR_WHOAMI_DB1300)
+		return -ENODEV;
+
+	db1300_gpio_config();
+
 	printk(KERN_INFO "NetLogic DBAu1300 Development Platform.\n\t"
 		"BoardID %d   CPLD Rev %d   DaughtercardID %d\n",
 		BCSR_WHOAMI_BOARD(whoami), BCSR_WHOAMI_CPLD(whoami),

arch/mips/alchemy/devboards/db1550.c

@@ -62,10 +62,16 @@ int __init db1550_board_setup(void)
 		  DB1550_BCSR_PHYS_ADDR + DB1550_BCSR_HEXLED_OFS);
 
 	whoami = bcsr_read(BCSR_WHOAMI); /* PB1550 hexled offset differs */
-	if ((BCSR_WHOAMI_BOARD(whoami) == BCSR_WHOAMI_PB1550_SDR) ||
-	    (BCSR_WHOAMI_BOARD(whoami) == BCSR_WHOAMI_PB1550_DDR))
+	switch (BCSR_WHOAMI_BOARD(whoami)) {
+	case BCSR_WHOAMI_PB1550_SDR:
+	case BCSR_WHOAMI_PB1550_DDR:
 		bcsr_init(PB1550_BCSR_PHYS_ADDR,
 			  PB1550_BCSR_PHYS_ADDR + PB1550_BCSR_HEXLED_OFS);
+	case BCSR_WHOAMI_DB1550:
+		break;
+	default:
+		return -ENODEV;
+	}
 
 	pr_info("Alchemy/AMD %s Board, CPLD Rev %d Board-ID %d	"	\
 		"Daughtercard ID %d\n", get_system_type(),

arch/mips/alchemy/devboards/db1235.c → arch/mips/alchemy/devboards/db1xxx.c

@@ -1,12 +1,13 @@
 /*
- * DB1200/PB1200 / DB1550 / DB1300 board support.
- *
- * These 4 boards can reliably be supported in a single kernel image.
+ * Alchemy DB/PB1xxx board support.
  */
 
 #include <asm/mach-au1x00/au1000.h>
 #include <asm/mach-db1x00/bcsr.h>
 
+int __init db1000_board_setup(void);
+int __init db1000_dev_setup(void);
+int __init db1500_pci_setup(void);
 int __init db1200_board_setup(void);
 int __init db1200_dev_setup(void);
 int __init db1300_board_setup(void);
@@ -18,6 +19,17 @@ int __init db1550_pci_setup(int);
 static const char *board_type_str(void)
 {
 	switch (BCSR_WHOAMI_BOARD(bcsr_read(BCSR_WHOAMI))) {
+	case BCSR_WHOAMI_DB1000:
+		return "DB1000";
+	case BCSR_WHOAMI_DB1500:
+		return "DB1500";
+	case BCSR_WHOAMI_DB1100:
+		return "DB1100";
+	case BCSR_WHOAMI_PB1500:
+	case BCSR_WHOAMI_PB1500R2:
+		return "PB1500";
+	case BCSR_WHOAMI_PB1100:
+		return "PB1100";
 	case BCSR_WHOAMI_PB1200_DDR1:
 	case BCSR_WHOAMI_PB1200_DDR2:
 		return "PB1200";
@@ -45,6 +57,11 @@ void __init board_setup(void)
 	int ret;
 
 	switch (alchemy_get_cputype()) {
+	case ALCHEMY_CPU_AU1000:
+	case ALCHEMY_CPU_AU1500:
+	case ALCHEMY_CPU_AU1100:
+		ret = db1000_board_setup();
+		break;
 	case ALCHEMY_CPU_AU1550:
 		ret = db1550_board_setup();
 		break;
@@ -62,7 +79,7 @@ void __init board_setup(void)
 		panic("cannot initialize board support");
 }
 
-int __init db1235_arch_init(void)
+static int __init db1xxx_arch_init(void)
 {
 	int id = BCSR_WHOAMI_BOARD(bcsr_read(BCSR_WHOAMI));
 	if (id == BCSR_WHOAMI_DB1550)
@@ -70,14 +87,24 @@ int __init db1235_arch_init(void)
 	else if ((id == BCSR_WHOAMI_PB1550_SDR) ||
 		 (id == BCSR_WHOAMI_PB1550_DDR))
 		return db1550_pci_setup(1);
+	else if ((id == BCSR_WHOAMI_DB1500) || (id == BCSR_WHOAMI_PB1500) ||
+		 (id == BCSR_WHOAMI_PB1500R2))
+		return db1500_pci_setup();
 
 	return 0;
 }
-arch_initcall(db1235_arch_init);
+arch_initcall(db1xxx_arch_init);
 
-int __init db1235_dev_init(void)
+static int __init db1xxx_dev_init(void)
 {
 	switch (BCSR_WHOAMI_BOARD(bcsr_read(BCSR_WHOAMI))) {
+	case BCSR_WHOAMI_DB1000:
+	case BCSR_WHOAMI_DB1500:
+	case BCSR_WHOAMI_DB1100:
+	case BCSR_WHOAMI_PB1500:
+	case BCSR_WHOAMI_PB1500R2:
+	case BCSR_WHOAMI_PB1100:
+		return db1000_dev_setup();
 	case BCSR_WHOAMI_PB1200_DDR1:
 	case BCSR_WHOAMI_PB1200_DDR2:
 	case BCSR_WHOAMI_DB1200:
@@ -91,4 +118,4 @@ int __init db1235_dev_init(void)
 	}
 	return 0;
 }
-device_initcall(db1235_dev_init);
+device_initcall(db1xxx_dev_init);

arch/mips/ar7/time.c

@@ -18,6 +18,7 @@
  * Setting up the clock on the MIPS boards.
  */
 
+#include <linux/init.h>
 #include <linux/time.h>
 #include <linux/err.h>
 #include <linux/clk.h>

arch/mips/bcm47xx/Makefile

@@ -4,4 +4,4 @@
 #
 
 obj-y				+= irq.o nvram.o prom.o serial.o setup.o time.o sprom.o
-obj-y				+= board.o buttons.o leds.o
+obj-y				+= board.o buttons.o leds.o workarounds.o

arch/mips/bcm47xx/bcm47xx_private.h

@@ -9,4 +9,7 @@ int __init bcm47xx_buttons_register(void);
 /* leds.c */
 void __init bcm47xx_leds_register(void);
 
+/* workarounds.c */
+void __init bcm47xx_workarounds(void);
+
 #endif

arch/mips/bcm47xx/board.c

@@ -72,7 +72,11 @@ struct bcm47xx_board_type_list1 bcm47xx_board_list_hardware_version[] __initcons
 	{{BCM47XX_BOARD_ASUS_WL500W, "Asus WL500W"}, "WL500gW-"},
 	{{BCM47XX_BOARD_ASUS_WL520GC, "Asus WL520GC"}, "WL520GC-"},
 	{{BCM47XX_BOARD_ASUS_WL520GU, "Asus WL520GU"}, "WL520GU-"},
+	{{BCM47XX_BOARD_BELKIN_F7D3301, "Belkin F7D3301"}, "F7D3301"},
+	{{BCM47XX_BOARD_BELKIN_F7D3302, "Belkin F7D3302"}, "F7D3302"},
 	{{BCM47XX_BOARD_BELKIN_F7D4301, "Belkin F7D4301"}, "F7D4301"},
+	{{BCM47XX_BOARD_BELKIN_F7D4302, "Belkin F7D4302"}, "F7D4302"},
+	{{BCM47XX_BOARD_BELKIN_F7D4401, "Belkin F7D4401"}, "F7D4401"},
 	{ {0}, NULL},
 };
 
@@ -176,7 +180,16 @@ struct bcm47xx_board_type_list3 bcm47xx_board_list_board[] __initconst = {
 	{{BCM47XX_BOARD_PHICOMM_M1, "Phicomm M1"}, "0x0590", "80", "0x1104"},
 	{{BCM47XX_BOARD_ZTE_H218N, "ZTE H218N"}, "0x053d", "1234", "0x1305"},
 	{{BCM47XX_BOARD_NETGEAR_WNR3500L, "Netgear WNR3500L"}, "0x04CF", "3500", "02"},
-	{{BCM47XX_BOARD_LINKSYS_WRT54GSV1, "Linksys WRT54GS V1"}, "0x0101", "42", "0x10"},
+	{{BCM47XX_BOARD_LINKSYS_WRT54G, "Linksys WRT54G/GS/GL"}, "0x0101", "42", "0x10"},
+	{{BCM47XX_BOARD_LINKSYS_WRT54G, "Linksys WRT54G/GS/GL"}, "0x0467", "42", "0x10"},
+	{{BCM47XX_BOARD_LINKSYS_WRT54G, "Linksys WRT54G/GS/GL"}, "0x0708", "42", "0x10"},
+	{ {0}, NULL},
+};
+
+/* boardtype, boardrev */
+static const
+struct bcm47xx_board_type_list2 bcm47xx_board_list_board_type_rev[] __initconst = {
+	{{BCM47XX_BOARD_SIEMENS_SE505V2, "Siemens SE505 V2"}, "0x0101", "0x10"},
 	{ {0}, NULL},
 };
 
@@ -273,6 +286,16 @@ static __init const struct bcm47xx_board_type *bcm47xx_board_get_nvram(void)
 				return &e3->board;
 		}
 	}
+
+	if (bcm47xx_nvram_getenv("boardtype", buf1, sizeof(buf1)) >= 0 &&
+	    bcm47xx_nvram_getenv("boardrev", buf2, sizeof(buf2)) >= 0 &&
+	    bcm47xx_nvram_getenv("boardnum", buf3, sizeof(buf3)) ==  -ENOENT) {
+		for (e2 = bcm47xx_board_list_board_type_rev; e2->value1; e2++) {
+			if (!strcmp(buf1, e2->value1) &&
+			    !strcmp(buf2, e2->value2))
+				return &e2->board;
+		}
+	}
 	return bcm47xx_board_unknown;
 }
 

arch/mips/bcm47xx/buttons.c

@@ -258,6 +258,18 @@ bcm47xx_buttons_linksys_wrt310nv1[] __initconst = {
 	BCM47XX_GPIO_KEY(8, KEY_UNKNOWN),
 };
 
+static const struct gpio_keys_button
+bcm47xx_buttons_linksys_wrt54g3gv2[] __initconst = {
+	BCM47XX_GPIO_KEY(5, KEY_WIMAX),
+	BCM47XX_GPIO_KEY(6, KEY_RESTART),
+};
+
+static const struct gpio_keys_button
+bcm47xx_buttons_linksys_wrt54gsv1[] __initconst = {
+	BCM47XX_GPIO_KEY(4, KEY_WPS_BUTTON),
+	BCM47XX_GPIO_KEY(6, KEY_RESTART),
+};
+
 static const struct gpio_keys_button
 bcm47xx_buttons_linksys_wrt610nv1[] __initconst = {
 	BCM47XX_GPIO_KEY(6, KEY_RESTART),
@@ -270,6 +282,12 @@ bcm47xx_buttons_linksys_wrt610nv2[] __initconst = {
 	BCM47XX_GPIO_KEY(6, KEY_RESTART),
 };
 
+static const struct gpio_keys_button
+bcm47xx_buttons_linksys_wrtsl54gs[] __initconst = {
+	BCM47XX_GPIO_KEY(4, KEY_WPS_BUTTON),
+	BCM47XX_GPIO_KEY(6, KEY_RESTART),
+};
+
 /* Motorola */
 
 static const struct gpio_keys_button
@@ -402,7 +420,11 @@ int __init bcm47xx_buttons_register(void)
 		err = bcm47xx_copy_bdata(bcm47xx_buttons_asus_wlhdd);
 		break;
 
+	case BCM47XX_BOARD_BELKIN_F7D3301:
+	case BCM47XX_BOARD_BELKIN_F7D3302:
 	case BCM47XX_BOARD_BELKIN_F7D4301:
+	case BCM47XX_BOARD_BELKIN_F7D4302:
+	case BCM47XX_BOARD_BELKIN_F7D4401:
 		err = bcm47xx_copy_bdata(bcm47xx_buttons_belkin_f7d4301);
 		break;
 
@@ -479,12 +501,21 @@ int __init bcm47xx_buttons_register(void)
 	case BCM47XX_BOARD_LINKSYS_WRT310NV1:
 		err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_wrt310nv1);
 		break;
+	case BCM47XX_BOARD_LINKSYS_WRT54G:
+		err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_wrt54gsv1);
+		break;
+	case BCM47XX_BOARD_LINKSYS_WRT54G3GV2:
+		err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_wrt54g3gv2);
+		break;
 	case BCM47XX_BOARD_LINKSYS_WRT610NV1:
 		err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_wrt610nv1);
 		break;
 	case BCM47XX_BOARD_LINKSYS_WRT610NV2:
 		err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_wrt610nv2);
 		break;
+	case BCM47XX_BOARD_LINKSYS_WRTSL54GS:
+		err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_wrtsl54gs);
+		break;
 
 	case BCM47XX_BOARD_MOTOROLA_WE800G:
 		err = bcm47xx_copy_bdata(bcm47xx_buttons_motorola_we800g);

arch/mips/bcm47xx/leds.c

@@ -291,6 +291,21 @@ bcm47xx_leds_linksys_wrt310nv1[] __initconst = {
 	BCM47XX_GPIO_LED(9, "blue", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
 };
 
+static const struct gpio_led
+bcm47xx_leds_linksys_wrt54gsv1[] __initconst = {
+	BCM47XX_GPIO_LED(0, "unk", "dmz", 1, LEDS_GPIO_DEFSTATE_OFF),
+	BCM47XX_GPIO_LED(1, "unk", "power", 0, LEDS_GPIO_DEFSTATE_ON),
+	BCM47XX_GPIO_LED(5, "white", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
+	BCM47XX_GPIO_LED(7, "orange", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
+};
+
+static const struct gpio_led
+bcm47xx_leds_linksys_wrt54g3gv2[] __initconst = {
+	BCM47XX_GPIO_LED(1, "unk", "power", 0, LEDS_GPIO_DEFSTATE_ON),
+	BCM47XX_GPIO_LED(2, "green", "3g", 0, LEDS_GPIO_DEFSTATE_OFF),
+	BCM47XX_GPIO_LED(3, "blue", "3g", 0, LEDS_GPIO_DEFSTATE_OFF),
+};
+
 static const struct gpio_led
 bcm47xx_leds_linksys_wrt610nv1[] __initconst = {
 	BCM47XX_GPIO_LED(0, "unk", "usb",  1, LEDS_GPIO_DEFSTATE_OFF),
@@ -308,6 +323,15 @@ bcm47xx_leds_linksys_wrt610nv2[] __initconst = {
 	BCM47XX_GPIO_LED(7, "unk", "usb", 0, LEDS_GPIO_DEFSTATE_OFF),
 };
 
+static const struct gpio_led
+bcm47xx_leds_linksys_wrtsl54gs[] __initconst = {
+	BCM47XX_GPIO_LED(0, "unk", "wlan", 1, LEDS_GPIO_DEFSTATE_OFF),
+	BCM47XX_GPIO_LED(1, "unk", "power", 0, LEDS_GPIO_DEFSTATE_ON),
+	BCM47XX_GPIO_LED(2, "white", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
+	BCM47XX_GPIO_LED(3, "orange", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
+	BCM47XX_GPIO_LED(7, "unk", "dmz", 1, LEDS_GPIO_DEFSTATE_OFF),
+};
+
 /* Motorola */
 
 static const struct gpio_led
@@ -359,6 +383,14 @@ bcm47xx_leds_netgear_wnr834bv2[] __initconst = {
 	BCM47XX_GPIO_LED(7, "unk", "connected", 0, LEDS_GPIO_DEFSTATE_OFF),
 };
 
+/* Siemens */
+static const struct gpio_led
+bcm47xx_leds_siemens_se505v2[] __initconst = {
+	BCM47XX_GPIO_LED(0, "unk", "dmz", 1, LEDS_GPIO_DEFSTATE_OFF),
+	BCM47XX_GPIO_LED(3, "unk", "wlan", 1, LEDS_GPIO_DEFSTATE_OFF),
+	BCM47XX_GPIO_LED(5, "unk", "power", 1, LEDS_GPIO_DEFSTATE_ON),
+};
+
 /* SimpleTech */
 
 static const struct gpio_led
@@ -425,7 +457,11 @@ void __init bcm47xx_leds_register(void)
 		bcm47xx_set_pdata(bcm47xx_leds_asus_wlhdd);
 		break;
 
+	case BCM47XX_BOARD_BELKIN_F7D3301:
+	case BCM47XX_BOARD_BELKIN_F7D3302:
 	case BCM47XX_BOARD_BELKIN_F7D4301:
+	case BCM47XX_BOARD_BELKIN_F7D4302:
+	case BCM47XX_BOARD_BELKIN_F7D4401:
 		bcm47xx_set_pdata(bcm47xx_leds_belkin_f7d4301);
 		break;
 
@@ -502,12 +538,21 @@ void __init bcm47xx_leds_register(void)
 	case BCM47XX_BOARD_LINKSYS_WRT310NV1:
 		bcm47xx_set_pdata(bcm47xx_leds_linksys_wrt310nv1);
 		break;
+	case BCM47XX_BOARD_LINKSYS_WRT54G:
+		bcm47xx_set_pdata(bcm47xx_leds_linksys_wrt54gsv1);
+		break;
+	case BCM47XX_BOARD_LINKSYS_WRT54G3GV2:
+		bcm47xx_set_pdata(bcm47xx_leds_linksys_wrt54g3gv2);
+		break;
 	case BCM47XX_BOARD_LINKSYS_WRT610NV1:
 		bcm47xx_set_pdata(bcm47xx_leds_linksys_wrt610nv1);
 		break;
 	case BCM47XX_BOARD_LINKSYS_WRT610NV2:
 		bcm47xx_set_pdata(bcm47xx_leds_linksys_wrt610nv2);
 		break;
+	case BCM47XX_BOARD_LINKSYS_WRTSL54GS:
+		bcm47xx_set_pdata(bcm47xx_leds_linksys_wrtsl54gs);
+		break;
 
 	case BCM47XX_BOARD_MOTOROLA_WE800G:
 		bcm47xx_set_pdata(bcm47xx_leds_motorola_we800g);
@@ -529,6 +574,10 @@ void __init bcm47xx_leds_register(void)
 		bcm47xx_set_pdata(bcm47xx_leds_netgear_wnr834bv2);
 		break;
 
+	case BCM47XX_BOARD_SIEMENS_SE505V2:
+		bcm47xx_set_pdata(bcm47xx_leds_siemens_se505v2);
+		break;
+
 	case BCM47XX_BOARD_SIMPLETECH_SIMPLESHARE:
 		bcm47xx_set_pdata(bcm47xx_leds_simpletech_simpleshare);
 		break;

arch/mips/bcm47xx/setup.c

@@ -212,7 +212,7 @@ void __init plat_mem_setup(void)
 {
 	struct cpuinfo_mips *c = &current_cpu_data;
 
-	if (c->cputype == CPU_74K) {
+	if ((c->cputype == CPU_74K) || (c->cputype == CPU_1074K)) {
 		printk(KERN_INFO "bcm47xx: using bcma bus\n");
 #ifdef CONFIG_BCM47XX_BCMA
 		bcm47xx_bus_type = BCM47XX_BUS_TYPE_BCMA;
@@ -282,6 +282,7 @@ static int __init bcm47xx_register_bus_complete(void)
 	}
 	bcm47xx_buttons_register();
 	bcm47xx_leds_register();
+	bcm47xx_workarounds();
 
 	fixed_phy_add(PHY_POLL, 0, &bcm47xx_fixed_phy_status);
 	return 0;

arch/mips/bcm47xx/workarounds.c

@@ -0,0 +1,31 @@
+#include "bcm47xx_private.h"
+
+#include <linux/gpio.h>
+#include <bcm47xx_board.h>
+#include <bcm47xx.h>
+
+static void __init bcm47xx_workarounds_netgear_wnr3500l(void)
+{
+	const int usb_power = 12;
+	int err;
+
+	err = gpio_request_one(usb_power, GPIOF_OUT_INIT_HIGH, "usb_power");
+	if (err)
+		pr_err("Failed to request USB power gpio: %d\n", err);
+	else
+		gpio_free(usb_power);
+}
+
+void __init bcm47xx_workarounds(void)
+{
+	enum bcm47xx_board board = bcm47xx_board_get();
+
+	switch (board) {
+	case BCM47XX_BOARD_NETGEAR_WNR3500L:
+		bcm47xx_workarounds_netgear_wnr3500l();
+		break;
+	default:
+		/* No workaround(s) needed */
+		break;
+	}
+}

arch/mips/bcm63xx/cpu.c

@@ -299,14 +299,13 @@ static unsigned int detect_memory_size(void)
 void __init bcm63xx_cpu_init(void)
 {
 	unsigned int tmp;
-	struct cpuinfo_mips *c = &current_cpu_data;
 	unsigned int cpu = smp_processor_id();
 	u32 chipid_reg;
 
 	/* soc registers location depends on cpu type */
 	chipid_reg = 0;
 
-	switch (c->cputype) {
+	switch (current_cpu_type()) {
 	case CPU_BMIPS3300:
 		if ((read_c0_prid() & PRID_IMP_MASK) != PRID_IMP_BMIPS3300_ALT)
 			__cpu_name[cpu] = "Broadcom BCM6338";

arch/mips/configs/db1000_defconfig

@@ -1,359 +0,0 @@
-CONFIG_MIPS=y
-CONFIG_MIPS_ALCHEMY=y
-CONFIG_MIPS_DB1000=y
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-CONFIG_TICK_ONESHOT=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_HZ_100=y
-CONFIG_HZ=100
-CONFIG_PREEMPT_NONE=y
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_CROSS_COMPILE=""
-CONFIG_LOCALVERSION="-db1x00"
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_KERNEL_LZMA=y
-CONFIG_DEFAULT_HOSTNAME="db1x00"
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-CONFIG_FHANDLE=y
-CONFIG_AUDIT=y
-CONFIG_TINY_RCU=y
-CONFIG_LOG_BUF_SHIFT=18
-CONFIG_NAMESPACES=y
-CONFIG_UTS_NS=y
-CONFIG_IPC_NS=y
-CONFIG_USER_NS=y
-CONFIG_PID_NS=y
-CONFIG_NET_NS=y
-CONFIG_SYSCTL=y
-CONFIG_EXPERT=y
-CONFIG_KALLSYMS=y
-CONFIG_KALLSYMS_ALL=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_EMBEDDED=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_PERF_USE_VMALLOC=y
-CONFIG_PCI_QUIRKS=y
-CONFIG_SLAB=y
-CONFIG_SLABINFO=y
-CONFIG_BLOCK=y
-CONFIG_LBDAF=y
-CONFIG_BLK_DEV_BSG=y
-CONFIG_BLK_DEV_BSGLIB=y
-CONFIG_IOSCHED_NOOP=y
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-CONFIG_FREEZER=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCCARD=y
-CONFIG_PCMCIA=y
-CONFIG_PCMCIA_LOAD_CIS=y
-CONFIG_PCMCIA_ALCHEMY_DEVBOARD=y
-CONFIG_BINFMT_ELF=y
-CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-CONFIG_PM_SLEEP=y
-CONFIG_PM_RUNTIME=y
-CONFIG_PM=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_XFRM=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-CONFIG_NET_IPIP=y
-CONFIG_INET_TUNNEL=y
-CONFIG_INET_LRO=y
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-CONFIG_IPV6=y
-CONFIG_INET6_XFRM_MODE_TRANSPORT=y
-CONFIG_INET6_XFRM_MODE_TUNNEL=y
-CONFIG_INET6_XFRM_MODE_BEET=y
-CONFIG_IPV6_SIT=y
-CONFIG_IPV6_NDISC_NODETYPE=y
-CONFIG_STP=y
-CONFIG_GARP=y
-CONFIG_BRIDGE=y
-CONFIG_BRIDGE_IGMP_SNOOPING=y
-CONFIG_VLAN_8021Q=y
-CONFIG_VLAN_8021Q_GVRP=y
-CONFIG_LLC=y
-CONFIG_LLC2=y
-CONFIG_DNS_RESOLVER=y
-CONFIG_BT=y
-CONFIG_BT_L2CAP=y
-CONFIG_BT_SCO=y
-CONFIG_BT_RFCOMM=y
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=y
-CONFIG_BT_BNEP_MC_FILTER=y
-CONFIG_BT_BNEP_PROTO_FILTER=y
-CONFIG_BT_HIDP=y
-CONFIG_BT_HCIBTUSB=y
-CONFIG_UEVENT_HELPER_PATH=""
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_GEN_PROBE=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-CONFIG_MTD_CFI_GEOMETRY=y
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-CONFIG_MTD_CFI_I4=y
-CONFIG_MTD_CFI_I8=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_CFI_UTIL=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_SCSI_MOD=y
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-CONFIG_SCSI_PROC_FS=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_SG=y
-CONFIG_SCSI_MULTI_LUN=y
-CONFIG_SCSI_CONSTANTS=y
-CONFIG_ATA=y
-CONFIG_ATA_VERBOSE_ERROR=y
-CONFIG_ATA_SFF=y
-CONFIG_ATA_BMDMA=y
-CONFIG_PATA_HPT37X=y
-CONFIG_PATA_PCMCIA=y
-CONFIG_MD=y
-CONFIG_BLK_DEV_DM=y
-CONFIG_FIREWIRE=y
-CONFIG_FIREWIRE_OHCI=y
-CONFIG_FIREWIRE_OHCI_DEBUG=y
-CONFIG_FIREWIRE_NET=y
-CONFIG_NETDEVICES=y
-CONFIG_MII=y
-CONFIG_PHYLIB=y
-CONFIG_NET_ETHERNET=y
-CONFIG_MIPS_AU1X00_ENET=y
-CONFIG_NET_PCMCIA=y
-CONFIG_PCMCIA_3C589=y
-CONFIG_PCMCIA_PCNET=y
-CONFIG_PPP=y
-CONFIG_PPP_MULTILINK=y
-CONFIG_PPP_FILTER=y
-CONFIG_PPP_ASYNC=y
-CONFIG_PPP_SYNC_TTY=y
-CONFIG_PPP_DEFLATE=y
-CONFIG_PPP_BSDCOMP=y
-CONFIG_PPP_MPPE=y
-CONFIG_PPPOE=y
-CONFIG_INPUT=y
-CONFIG_INPUT_EVDEV=y
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_UINPUT=y
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
-CONFIG_DEVKMEM=y
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_TTY_PRINTK=y
-CONFIG_DEVPORT=y
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-CONFIG_FB=y
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-CONFIG_FB_AU1100=y
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
-CONFIG_FONTS=y
-CONFIG_FONT_8x16=y
-CONFIG_SOUND=y
-CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
-CONFIG_SND_JACK=y
-CONFIG_SND_SEQUENCER=y
-CONFIG_SND_HRTIMER=y
-CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
-CONFIG_SND_DYNAMIC_MINORS=y
-CONFIG_SND_VMASTER=y
-CONFIG_SND_AC97_CODEC=y
-CONFIG_SND_SOC=y
-CONFIG_SND_SOC_AC97_BUS=y
-CONFIG_SND_SOC_AU1XAUDIO=y
-CONFIG_SND_SOC_AU1XAC97C=y
-CONFIG_SND_SOC_DB1000=y
-CONFIG_SND_SOC_AC97_CODEC=y
-CONFIG_AC97_BUS=y
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-CONFIG_HIDRAW=y
-CONFIG_USB_HID=y
-CONFIG_USB_SUPPORT=y
-CONFIG_USB=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_ROOT_HUB_TT=y
-CONFIG_USB_EHCI_TT_NEWSCHED=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_OHCI_HCD_PLATFORM=y
-CONFIG_USB_UHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_RTC_LIB=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-CONFIG_RTC_DRV_AU1XXX=y
-CONFIG_EXT4_FS=y
-CONFIG_EXT4_USE_FOR_EXT23=y
-CONFIG_EXT4_FS_XATTR=y
-CONFIG_EXT4_FS_POSIX_ACL=y
-CONFIG_EXT4_FS_SECURITY=y
-CONFIG_JBD2=y
-CONFIG_FS_MBCACHE=y
-CONFIG_FS_POSIX_ACL=y
-CONFIG_EXPORTFS=y
-CONFIG_FILE_LOCKING=y
-CONFIG_FSNOTIFY=y
-CONFIG_DNOTIFY=y
-CONFIG_INOTIFY_USER=y
-CONFIG_GENERIC_ACL=y
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
-CONFIG_TMPFS_XATTR=y
-CONFIG_MISC_FILESYSTEMS=y
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-CONFIG_JFFS2_SUMMARY=y
-CONFIG_JFFS2_FS_XATTR=y
-CONFIG_JFFS2_FS_POSIX_ACL=y
-CONFIG_JFFS2_FS_SECURITY=y
-CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_LZO=y
-CONFIG_JFFS2_RTIME=y
-CONFIG_JFFS2_RUBIN=y
-CONFIG_JFFS2_CMODE_PRIORITY=y
-CONFIG_SQUASHFS=y
-CONFIG_SQUASHFS_ZLIB=y
-CONFIG_SQUASHFS_LZO=y
-CONFIG_SQUASHFS_XZ=y
-CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
-CONFIG_NETWORK_FILESYSTEMS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V4=y
-CONFIG_NFS_V4_1=y
-CONFIG_PNFS_FILE_LAYOUT=y
-CONFIG_PNFS_BLOCK=y
-CONFIG_ROOT_NFS=y
-CONFIG_NFS_USE_KERNEL_DNS=y
-CONFIG_NFS_USE_NEW_IDMAPPER=y
-CONFIG_NFSD=y
-CONFIG_NFSD_V2_ACL=y
-CONFIG_NFSD_V3=y
-CONFIG_NFSD_V3_ACL=y
-CONFIG_NFSD_V4=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_SUNRPC_BACKCHANNEL=y
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_850=y
-CONFIG_NLS_CODEPAGE_1250=y
-CONFIG_NLS_ASCII=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_ISO8859_15=y
-CONFIG_NLS_UTF8=y
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="noirqdebug rootwait root=/dev/sda1 rootfstype=ext4 console=ttyS0,115200 video=au1100fb:panel:CRT_800x600_16"
-CONFIG_DEBUG_ZBOOT=y
-CONFIG_KEYS=y
-CONFIG_KEYS_DEBUG_PROC_KEYS=y
-CONFIG_SECURITYFS=y
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_PCOMP2=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
-CONFIG_CRYPTO_WORKQUEUE=y
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_SHA1=y
-CONFIG_CRYPTO_AES=y
-CONFIG_CRYPTO_ANSI_CPRNG=y
-CONFIG_BITREVERSE=y
-CONFIG_CRC_CCITT=y
-CONFIG_CRC16=y
-CONFIG_CRC_ITU_T=y
-CONFIG_CRC32=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_XZ_DEC=y

arch/mips/configs/db1235_defconfig

@@ -1,434 +0,0 @@
-CONFIG_MIPS_ALCHEMY=y
-CONFIG_MIPS_DB1235=y
-CONFIG_COMPACTION=y
-CONFIG_KSM=y
-CONFIG_HZ_100=y
-CONFIG_EXPERIMENTAL=y
-CONFIG_LOCALVERSION="-db1235"
-CONFIG_KERNEL_LZMA=y
-CONFIG_DEFAULT_HOSTNAME="db1235"
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_BSD_PROCESS_ACCT_V3=y
-CONFIG_FHANDLE=y
-CONFIG_TASKSTATS=y
-CONFIG_TASK_DELAY_ACCT=y
-CONFIG_AUDIT=y
-CONFIG_AUDIT_LOGINUID_IMMUTABLE=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_LOG_BUF_SHIFT=16
-CONFIG_NAMESPACES=y
-CONFIG_EMBEDDED=y
-CONFIG_SLAB=y
-CONFIG_JUMP_LABEL=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_LDM_PARTITION=y
-CONFIG_EFI_PARTITION=y
-CONFIG_PCI=y
-CONFIG_PCCARD=y
-CONFIG_PCMCIA_ALCHEMY_DEVBOARD=y
-CONFIG_PM_RUNTIME=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_UNIX_DIAG=y
-CONFIG_XFRM_USER=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_MULTIPLE_TABLES=y
-CONFIG_IP_ROUTE_MULTIPATH=y
-CONFIG_IP_ROUTE_VERBOSE=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-CONFIG_NET_IPIP=y
-CONFIG_NET_IPGRE_DEMUX=y
-CONFIG_NET_IPGRE=y
-CONFIG_NET_IPGRE_BROADCAST=y
-CONFIG_IP_MROUTE=y
-CONFIG_IP_MROUTE_MULTIPLE_TABLES=y
-CONFIG_IP_PIMSM_V1=y
-CONFIG_IP_PIMSM_V2=y
-CONFIG_ARPD=y
-CONFIG_SYN_COOKIES=y
-CONFIG_NET_IPVTI=y
-CONFIG_INET_AH=y
-CONFIG_INET_ESP=y
-CONFIG_INET_IPCOMP=y
-CONFIG_INET_UDP_DIAG=y
-CONFIG_TCP_CONG_ADVANCED=y
-CONFIG_TCP_CONG_HSTCP=y
-CONFIG_TCP_CONG_HYBLA=y
-CONFIG_TCP_CONG_SCALABLE=y
-CONFIG_TCP_CONG_LP=y
-CONFIG_TCP_CONG_VENO=y
-CONFIG_TCP_CONG_YEAH=y
-CONFIG_TCP_CONG_ILLINOIS=y
-CONFIG_DEFAULT_HYBLA=y
-CONFIG_TCP_MD5SIG=y
-CONFIG_IPV6_PRIVACY=y
-CONFIG_IPV6_ROUTER_PREF=y
-CONFIG_IPV6_ROUTE_INFO=y
-CONFIG_IPV6_OPTIMISTIC_DAD=y
-CONFIG_INET6_AH=y
-CONFIG_INET6_ESP=y
-CONFIG_INET6_IPCOMP=y
-CONFIG_IPV6_MIP6=y
-CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=y
-CONFIG_IPV6_SIT_6RD=y
-CONFIG_IPV6_TUNNEL=y
-CONFIG_IPV6_MULTIPLE_TABLES=y
-CONFIG_IPV6_SUBTREES=y
-CONFIG_IPV6_MROUTE=y
-CONFIG_IPV6_MROUTE_MULTIPLE_TABLES=y
-CONFIG_IPV6_PIMSM_V2=y
-CONFIG_NETFILTER=y
-CONFIG_NF_CONNTRACK=y
-CONFIG_NF_CONNTRACK_EVENTS=y
-CONFIG_NF_CONNTRACK_TIMEOUT=y
-CONFIG_NF_CONNTRACK_TIMESTAMP=y
-CONFIG_NF_CT_PROTO_DCCP=y
-CONFIG_NF_CT_PROTO_SCTP=y
-CONFIG_NF_CT_PROTO_UDPLITE=y
-CONFIG_NF_CONNTRACK_AMANDA=y
-CONFIG_NF_CONNTRACK_FTP=y
-CONFIG_NF_CONNTRACK_H323=y
-CONFIG_NF_CONNTRACK_IRC=y
-CONFIG_NF_CONNTRACK_NETBIOS_NS=y
-CONFIG_NF_CONNTRACK_SNMP=y
-CONFIG_NF_CONNTRACK_PPTP=y
-CONFIG_NF_CONNTRACK_SANE=y
-CONFIG_NF_CONNTRACK_SIP=y
-CONFIG_NF_CONNTRACK_TFTP=y
-CONFIG_NF_CT_NETLINK=y
-CONFIG_NF_CT_NETLINK_TIMEOUT=y
-CONFIG_NF_CT_NETLINK_HELPER=y
-CONFIG_NETFILTER_NETLINK_QUEUE_CT=y
-CONFIG_NETFILTER_XT_TARGET_CLASSIFY=y
-CONFIG_NETFILTER_XT_TARGET_CONNMARK=y
-CONFIG_NETFILTER_XT_TARGET_HMARK=y
-CONFIG_NETFILTER_XT_TARGET_IDLETIMER=y
-CONFIG_NETFILTER_XT_TARGET_LED=y
-CONFIG_NETFILTER_XT_TARGET_LOG=y
-CONFIG_NETFILTER_XT_TARGET_MARK=y
-CONFIG_NETFILTER_XT_TARGET_NFLOG=y
-CONFIG_NETFILTER_XT_TARGET_NFQUEUE=y
-CONFIG_NETFILTER_XT_TARGET_TEE=y
-CONFIG_NETFILTER_XT_TARGET_TCPMSS=y
-CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=y
-CONFIG_NETFILTER_XT_MATCH_CLUSTER=y
-CONFIG_NETFILTER_XT_MATCH_COMMENT=y
-CONFIG_NETFILTER_XT_MATCH_CONNBYTES=y
-CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=y
-CONFIG_NETFILTER_XT_MATCH_CONNMARK=y
-CONFIG_NETFILTER_XT_MATCH_CONNTRACK=y
-CONFIG_NETFILTER_XT_MATCH_CPU=y
-CONFIG_NETFILTER_XT_MATCH_DCCP=y
-CONFIG_NETFILTER_XT_MATCH_DEVGROUP=y
-CONFIG_NETFILTER_XT_MATCH_DSCP=y
-CONFIG_NETFILTER_XT_MATCH_ESP=y
-CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=y
-CONFIG_NETFILTER_XT_MATCH_HELPER=y
-CONFIG_NETFILTER_XT_MATCH_IPRANGE=y
-CONFIG_NETFILTER_XT_MATCH_LENGTH=y
-CONFIG_NETFILTER_XT_MATCH_LIMIT=y
-CONFIG_NETFILTER_XT_MATCH_MAC=y
-CONFIG_NETFILTER_XT_MATCH_MARK=y
-CONFIG_NETFILTER_XT_MATCH_MULTIPORT=y
-CONFIG_NETFILTER_XT_MATCH_NFACCT=y
-CONFIG_NETFILTER_XT_MATCH_OSF=y
-CONFIG_NETFILTER_XT_MATCH_OWNER=y
-CONFIG_NETFILTER_XT_MATCH_POLICY=y
-CONFIG_NETFILTER_XT_MATCH_PHYSDEV=y
-CONFIG_NETFILTER_XT_MATCH_PKTTYPE=y
-CONFIG_NETFILTER_XT_MATCH_QUOTA=y
-CONFIG_NETFILTER_XT_MATCH_RATEEST=y
-CONFIG_NETFILTER_XT_MATCH_REALM=y
-CONFIG_NETFILTER_XT_MATCH_RECENT=y
-CONFIG_NETFILTER_XT_MATCH_SCTP=y
-CONFIG_NETFILTER_XT_MATCH_STATE=y
-CONFIG_NETFILTER_XT_MATCH_STATISTIC=y
-CONFIG_NETFILTER_XT_MATCH_STRING=y
-CONFIG_NETFILTER_XT_MATCH_TCPMSS=y
-CONFIG_NETFILTER_XT_MATCH_TIME=y
-CONFIG_NETFILTER_XT_MATCH_U32=y
-CONFIG_NF_CONNTRACK_IPV4=y
-CONFIG_IP_NF_IPTABLES=y
-CONFIG_IP_NF_MATCH_AH=y
-CONFIG_IP_NF_MATCH_ECN=y
-CONFIG_IP_NF_MATCH_RPFILTER=y
-CONFIG_IP_NF_MATCH_TTL=y
-CONFIG_IP_NF_FILTER=y
-CONFIG_IP_NF_TARGET_REJECT=y
-CONFIG_IP_NF_TARGET_ULOG=y
-CONFIG_NF_NAT=y
-CONFIG_IP_NF_TARGET_MASQUERADE=y
-CONFIG_IP_NF_TARGET_NETMAP=y
-CONFIG_IP_NF_TARGET_REDIRECT=y
-CONFIG_IP_NF_MANGLE=y
-CONFIG_IP_NF_TARGET_CLUSTERIP=y
-CONFIG_IP_NF_TARGET_ECN=y
-CONFIG_IP_NF_TARGET_TTL=y
-CONFIG_IP_NF_RAW=y
-CONFIG_IP_NF_ARPTABLES=y
-CONFIG_IP_NF_ARPFILTER=y
-CONFIG_IP_NF_ARP_MANGLE=y
-CONFIG_NF_CONNTRACK_IPV6=y
-CONFIG_IP6_NF_IPTABLES=y
-CONFIG_IP6_NF_MATCH_AH=y
-CONFIG_IP6_NF_MATCH_EUI64=y
-CONFIG_IP6_NF_MATCH_FRAG=y
-CONFIG_IP6_NF_MATCH_OPTS=y
-CONFIG_IP6_NF_MATCH_HL=y
-CONFIG_IP6_NF_MATCH_IPV6HEADER=y
-CONFIG_IP6_NF_MATCH_MH=y
-CONFIG_IP6_NF_MATCH_RPFILTER=y
-CONFIG_IP6_NF_MATCH_RT=y
-CONFIG_IP6_NF_TARGET_HL=y
-CONFIG_IP6_NF_FILTER=y
-CONFIG_IP6_NF_TARGET_REJECT=y
-CONFIG_IP6_NF_MANGLE=y
-CONFIG_IP6_NF_RAW=y
-CONFIG_BRIDGE_NF_EBTABLES=y
-CONFIG_BRIDGE_EBT_BROUTE=y
-CONFIG_BRIDGE_EBT_T_FILTER=y
-CONFIG_BRIDGE_EBT_T_NAT=y
-CONFIG_BRIDGE_EBT_802_3=y
-CONFIG_BRIDGE_EBT_AMONG=y
-CONFIG_BRIDGE_EBT_ARP=y
-CONFIG_BRIDGE_EBT_IP=y
-CONFIG_BRIDGE_EBT_IP6=y
-CONFIG_BRIDGE_EBT_LIMIT=y
-CONFIG_BRIDGE_EBT_MARK=y
-CONFIG_BRIDGE_EBT_PKTTYPE=y
-CONFIG_BRIDGE_EBT_STP=y
-CONFIG_BRIDGE_EBT_VLAN=y
-CONFIG_BRIDGE_EBT_ARPREPLY=y
-CONFIG_BRIDGE_EBT_DNAT=y
-CONFIG_BRIDGE_EBT_MARK_T=y
-CONFIG_BRIDGE_EBT_REDIRECT=y
-CONFIG_BRIDGE_EBT_SNAT=y
-CONFIG_BRIDGE_EBT_LOG=y
-CONFIG_BRIDGE_EBT_NFLOG=y
-CONFIG_L2TP=y
-CONFIG_L2TP_V3=y
-CONFIG_L2TP_IP=y
-CONFIG_L2TP_ETH=y
-CONFIG_BRIDGE=y
-CONFIG_VLAN_8021Q=y
-CONFIG_VLAN_8021Q_GVRP=y
-CONFIG_LLC2=y
-CONFIG_NET_SCHED=y
-CONFIG_NET_SCH_CBQ=y
-CONFIG_NET_SCH_HTB=y
-CONFIG_NET_SCH_HFSC=y
-CONFIG_NET_SCH_PRIO=y
-CONFIG_NET_SCH_MULTIQ=y
-CONFIG_NET_SCH_RED=y
-CONFIG_NET_SCH_SFB=y
-CONFIG_NET_SCH_SFQ=y
-CONFIG_NET_SCH_TEQL=y
-CONFIG_NET_SCH_TBF=y
-CONFIG_NET_SCH_GRED=y
-CONFIG_NET_SCH_DSMARK=y
-CONFIG_NET_SCH_NETEM=y
-CONFIG_NET_SCH_DRR=y
-CONFIG_NET_SCH_MQPRIO=y
-CONFIG_NET_SCH_CHOKE=y
-CONFIG_NET_SCH_QFQ=y
-CONFIG_NET_SCH_CODEL=y
-CONFIG_NET_SCH_FQ_CODEL=y
-CONFIG_NET_SCH_INGRESS=y
-CONFIG_NET_SCH_PLUG=y
-CONFIG_NET_CLS_BASIC=y
-CONFIG_NET_CLS_TCINDEX=y
-CONFIG_NET_CLS_ROUTE4=y
-CONFIG_NET_CLS_FW=y
-CONFIG_NET_CLS_U32=y
-CONFIG_CLS_U32_PERF=y
-CONFIG_CLS_U32_MARK=y
-CONFIG_NET_CLS_RSVP=y
-CONFIG_NET_CLS_RSVP6=y
-CONFIG_NET_CLS_FLOW=y
-CONFIG_NET_EMATCH=y
-CONFIG_NET_EMATCH_CMP=y
-CONFIG_NET_EMATCH_NBYTE=y
-CONFIG_NET_EMATCH_U32=y
-CONFIG_NET_EMATCH_META=y
-CONFIG_NET_EMATCH_TEXT=y
-CONFIG_NET_CLS_ACT=y
-CONFIG_NET_ACT_POLICE=y
-CONFIG_NET_ACT_GACT=y
-CONFIG_GACT_PROB=y
-CONFIG_NET_ACT_MIRRED=y
-CONFIG_NET_ACT_NAT=y
-CONFIG_NET_ACT_PEDIT=y
-CONFIG_NET_ACT_SIMP=y
-CONFIG_NET_ACT_SKBEDIT=y
-CONFIG_NET_ACT_CSUM=y
-CONFIG_NET_CLS_IND=y
-CONFIG_BT=y
-CONFIG_BT_RFCOMM=y
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=y
-CONFIG_BT_BNEP_MC_FILTER=y
-CONFIG_BT_BNEP_PROTO_FILTER=y
-CONFIG_BT_HIDP=y
-CONFIG_BT_HCIBTUSB=y
-CONFIG_CFG80211=y
-CONFIG_CFG80211_CERTIFICATION_ONUS=y
-CONFIG_CFG80211_WEXT=y
-CONFIG_MAC80211=y
-CONFIG_MAC80211_LEDS=y
-CONFIG_RFKILL=y
-CONFIG_RFKILL_INPUT=y
-CONFIG_DEVTMPFS=y
-CONFIG_DEVTMPFS_MOUNT=y
-CONFIG_MTD=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_M25P80=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_PLATFORM=y
-CONFIG_EEPROM_AT24=y
-CONFIG_EEPROM_AT25=y
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE_AU1XXX=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_SG=y
-CONFIG_SCSI_MULTI_LUN=y
-CONFIG_ATA=y
-CONFIG_PATA_HPT37X=y
-CONFIG_PATA_PCMCIA=y
-CONFIG_PATA_PLATFORM=y
-CONFIG_NETDEVICES=y
-CONFIG_MIPS_AU1X00_ENET=y
-CONFIG_SMC91X=y
-CONFIG_SMSC911X=y
-CONFIG_AMD_PHY=y
-CONFIG_SMSC_PHY=y
-CONFIG_RT2X00=y
-CONFIG_RT73USB=y
-CONFIG_INPUT_EVDEV=y
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_WM97XX=y
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_UINPUT=y
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_TTY_PRINTK=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_AU1550=y
-CONFIG_SPI=y
-CONFIG_SPI_AU1550=y
-CONFIG_GPIO_SYSFS=y
-CONFIG_SENSORS_ADM1025=y
-CONFIG_SENSORS_LM70=y
-CONFIG_SOUND=y
-CONFIG_SND=y
-CONFIG_SND_HRTIMER=y
-CONFIG_SND_DYNAMIC_MINORS=y
-CONFIG_SND_SOC=y
-CONFIG_SND_SOC_AU1XPSC=y
-CONFIG_SND_SOC_DB1200=y
-CONFIG_HIDRAW=y
-CONFIG_UHID=y
-CONFIG_USB_HIDDEV=y
-CONFIG_USB=y
-CONFIG_USB_DYNAMIC_MINORS=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_HCD_PLATFORM=y
-CONFIG_USB_EHCI_ROOT_HUB_TT=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_OHCI_HCD_PLATFORM=y
-CONFIG_USB_STORAGE=y
-CONFIG_MMC=y
-CONFIG_MMC_AU1X=y
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_AU1XXX=y
-CONFIG_EXT4_FS=y
-CONFIG_EXT4_FS_POSIX_ACL=y
-CONFIG_EXT4_FS_SECURITY=y
-CONFIG_XFS_FS=y
-CONFIG_XFS_POSIX_ACL=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
-CONFIG_CONFIGFS_FS=y
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_SUMMARY=y
-CONFIG_JFFS2_FS_XATTR=y
-CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_LZO=y
-CONFIG_JFFS2_CMODE_FAVOURLZO=y
-CONFIG_SQUASHFS=y
-CONFIG_SQUASHFS_LZO=y
-CONFIG_SQUASHFS_XZ=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_NFS_V4=y
-CONFIG_NFS_V4_1=y
-CONFIG_NFS_V4_1_IMPLEMENTATION_ID_DOMAIN="kernel.org"
-CONFIG_ROOT_NFS=y
-CONFIG_NFSD=y
-CONFIG_NFSD_V3_ACL=y
-CONFIG_NFSD_V4=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_850=y
-CONFIG_NLS_CODEPAGE_852=y
-CONFIG_NLS_CODEPAGE_1250=y
-CONFIG_NLS_ASCII=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_ISO8859_2=y
-CONFIG_NLS_ISO8859_15=y
-CONFIG_NLS_UTF8=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_STRIP_ASM_SYMS=y
-CONFIG_SECURITYFS=y
-CONFIG_CRYPTO_USER=y
-CONFIG_CRYPTO_NULL=y
-CONFIG_CRYPTO_CRYPTD=y
-CONFIG_CRYPTO_CCM=y
-CONFIG_CRYPTO_GCM=y
-CONFIG_CRYPTO_CTS=y
-CONFIG_CRYPTO_LRW=y
-CONFIG_CRYPTO_PCBC=y
-CONFIG_CRYPTO_XTS=y
-CONFIG_CRYPTO_XCBC=y
-CONFIG_CRYPTO_VMAC=y
-CONFIG_CRYPTO_MD4=y
-CONFIG_CRYPTO_MICHAEL_MIC=y
-CONFIG_CRYPTO_RMD128=y
-CONFIG_CRYPTO_RMD160=y
-CONFIG_CRYPTO_RMD256=y
-CONFIG_CRYPTO_RMD320=y
-CONFIG_CRYPTO_SHA256=y
-CONFIG_CRYPTO_SHA512=y
-CONFIG_CRYPTO_TGR192=y
-CONFIG_CRYPTO_WP512=y
-CONFIG_CRYPTO_ANUBIS=y
-CONFIG_CRYPTO_BLOWFISH=y
-CONFIG_CRYPTO_CAMELLIA=y
-CONFIG_CRYPTO_CAST5=y
-CONFIG_CRYPTO_CAST6=y
-CONFIG_CRYPTO_FCRYPT=y
-CONFIG_CRYPTO_KHAZAD=y
-CONFIG_CRYPTO_SALSA20=y
-CONFIG_CRYPTO_SEED=y
-CONFIG_CRYPTO_SERPENT=y
-CONFIG_CRYPTO_TEA=y
-CONFIG_CRYPTO_TWOFISH=y
-CONFIG_CRYPTO_ZLIB=y
-CONFIG_CRYPTO_LZO=y
-CONFIG_CRYPTO_USER_API_HASH=y
-CONFIG_CRYPTO_USER_API_SKCIPHER=y

arch/mips/configs/db1xxx_defconfig

@@ -0,0 +1,245 @@
+CONFIG_MIPS_ALCHEMY=y
+CONFIG_MIPS_DB1XXX=y
+CONFIG_CMA=y
+CONFIG_CMA_DEBUG=y
+CONFIG_HZ_100=y
+CONFIG_LOCALVERSION="-db1xxx"
+CONFIG_KERNEL_XZ=y
+CONFIG_DEFAULT_HOSTNAME="db1xxx"
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_FHANDLE=y
+CONFIG_AUDIT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_LOG_BUF_SHIFT=16
+CONFIG_CGROUPS=y
+CONFIG_CGROUP_FREEZER=y
+CONFIG_CGROUP_DEVICE=y
+CONFIG_CPUSETS=y
+CONFIG_CGROUP_CPUACCT=y
+CONFIG_RESOURCE_COUNTERS=y
+CONFIG_MEMCG=y
+CONFIG_MEMCG_SWAP=y
+CONFIG_MEMCG_KMEM=y
+CONFIG_CGROUP_SCHED=y
+CONFIG_CFS_BANDWIDTH=y
+CONFIG_RT_GROUP_SCHED=y
+CONFIG_BLK_CGROUP=y
+CONFIG_KALLSYMS_ALL=y
+CONFIG_EMBEDDED=y
+CONFIG_SLAB=y
+CONFIG_BLK_DEV_BSGLIB=y
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_DEFAULT_NOOP=y
+CONFIG_PCI=y
+CONFIG_PCI_REALLOC_ENABLE_AUTO=y
+CONFIG_PCCARD=y
+CONFIG_PCMCIA_ALCHEMY_DEVBOARD=y
+CONFIG_PM_RUNTIME=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_PACKET_DIAG=y
+CONFIG_UNIX=y
+CONFIG_UNIX_DIAG=y
+CONFIG_XFRM_USER=y
+CONFIG_XFRM_SUB_POLICY=y
+CONFIG_XFRM_MIGRATE=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_IP_FIB_TRIE_STATS=y
+CONFIG_NET_IPIP=y
+CONFIG_NET_IPGRE_DEMUX=y
+CONFIG_NET_IPGRE=y
+CONFIG_NET_IPGRE_BROADCAST=y
+CONFIG_SYN_COOKIES=y
+CONFIG_INET_AH=y
+CONFIG_INET_ESP=y
+CONFIG_INET_IPCOMP=y
+CONFIG_INET_UDP_DIAG=y
+CONFIG_TCP_CONG_ADVANCED=y
+CONFIG_TCP_CONG_VENO=y
+CONFIG_DEFAULT_VENO=y
+CONFIG_IPV6_ROUTER_PREF=y
+CONFIG_IPV6_ROUTE_INFO=y
+CONFIG_IPV6_OPTIMISTIC_DAD=y
+CONFIG_INET6_AH=y
+CONFIG_INET6_ESP=y
+CONFIG_INET6_IPCOMP=y
+CONFIG_IPV6_MIP6=y
+CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=y
+CONFIG_IPV6_VTI=y
+CONFIG_IPV6_SIT_6RD=y
+CONFIG_IPV6_GRE=y
+CONFIG_IPV6_MULTIPLE_TABLES=y
+CONFIG_IPV6_SUBTREES=y
+CONFIG_IPV6_MROUTE=y
+CONFIG_IPV6_MROUTE_MULTIPLE_TABLES=y
+CONFIG_IPV6_PIMSM_V2=y
+CONFIG_BRIDGE=y
+CONFIG_NETLINK_MMAP=y
+CONFIG_NETLINK_DIAG=y
+CONFIG_IRDA=y
+CONFIG_IRLAN=y
+CONFIG_IRCOMM=y
+CONFIG_IRDA_ULTRA=y
+CONFIG_IRDA_CACHE_LAST_LSAP=y
+CONFIG_IRDA_FAST_RR=y
+CONFIG_AU1000_FIR=y
+CONFIG_BT=y
+CONFIG_BT_RFCOMM=y
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=y
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_HIDP=y
+CONFIG_BT_HCIBTUSB=y
+CONFIG_CFG80211=y
+CONFIG_CFG80211_WEXT=y
+CONFIG_MAC80211=y
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_M25P80=y
+CONFIG_MTD_SST25L=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_ECC_BCH=y
+CONFIG_MTD_NAND_AU1550=y
+CONFIG_MTD_NAND_PLATFORM=y
+CONFIG_EEPROM_AT24=y
+CONFIG_EEPROM_AT25=y
+CONFIG_SCSI_TGT=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_SG=y
+CONFIG_SCSI_MULTI_LUN=y
+CONFIG_ATA=y
+CONFIG_PATA_HPT37X=y
+CONFIG_PATA_HPT3X2N=y
+CONFIG_PATA_PCMCIA=y
+CONFIG_PATA_PLATFORM=y
+CONFIG_NETDEVICES=y
+CONFIG_NLMON=y
+CONFIG_PCMCIA_3C589=y
+CONFIG_MIPS_AU1X00_ENET=y
+CONFIG_SMC91X=y
+CONFIG_SMSC911X=y
+CONFIG_AMD_PHY=y
+CONFIG_SMSC_PHY=y
+CONFIG_INPUT_EVDEV=y
+CONFIG_KEYBOARD_GPIO=y
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_ADS7846=y
+CONFIG_TOUCHSCREEN_WM97XX=y
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_UINPUT=y
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_TTY_PRINTK=y
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_AU1550=y
+CONFIG_SPI=y
+CONFIG_SPI_AU1550=y
+CONFIG_SPI_GPIO=y
+CONFIG_SENSORS_ADM1025=y
+CONFIG_SENSORS_LM70=y
+CONFIG_FB=y
+CONFIG_FB_AU1100=y
+CONFIG_FB_AU1200=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
+CONFIG_SOUND=y
+CONFIG_SND=y
+CONFIG_SND_SEQUENCER=y
+CONFIG_SND_HRTIMER=y
+CONFIG_SND_DYNAMIC_MINORS=y
+CONFIG_SND_AC97_POWER_SAVE=y
+CONFIG_SND_AC97_POWER_SAVE_DEFAULT=1
+CONFIG_SND_SOC=y
+CONFIG_SND_SOC_AU1XPSC=y
+CONFIG_SND_SOC_AU1XAUDIO=y
+CONFIG_SND_SOC_DB1000=y
+CONFIG_SND_SOC_DB1200=y
+CONFIG_HIDRAW=y
+CONFIG_UHID=y
+CONFIG_HID_LOGITECH=y
+CONFIG_HID_LOGITECH_DJ=y
+CONFIG_USB_HIDDEV=y
+CONFIG_USB=y
+CONFIG_USB_DYNAMIC_MINORS=y
+CONFIG_USB_OTG=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+CONFIG_USB_EHCI_HCD_PLATFORM=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_HCD_PLATFORM=y
+CONFIG_USB_STORAGE=y
+CONFIG_MMC=y
+CONFIG_MMC_CLKGATE=y
+CONFIG_SDIO_UART=y
+CONFIG_MMC_AU1X=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_AU1XXX=y
+CONFIG_FIRMWARE_MEMMAP=y
+CONFIG_EXT4_FS=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXT4_FS_SECURITY=y
+CONFIG_XFS_FS=y
+CONFIG_XFS_POSIX_ACL=y
+CONFIG_FANOTIFY=y
+CONFIG_FUSE_FS=y
+CONFIG_CUSE=y
+CONFIG_VFAT_FS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_CONFIGFS_FS=y
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_SUMMARY=y
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_LZO=y
+CONFIG_JFFS2_RUBIN=y
+CONFIG_SQUASHFS=y
+CONFIG_SQUASHFS_FILE_DIRECT=y
+CONFIG_SQUASHFS_XATTR=y
+CONFIG_SQUASHFS_LZO=y
+CONFIG_SQUASHFS_XZ=y
+CONFIG_F2FS_FS=y
+CONFIG_F2FS_FS_SECURITY=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+CONFIG_NFS_V4_1=y
+CONFIG_NFS_V4_2=y
+CONFIG_NFS_V4_1_IMPLEMENTATION_ID_DOMAIN="local"
+CONFIG_NFS_V4_1_MIGRATION=y
+CONFIG_NFSD=y
+CONFIG_NFSD_V3_ACL=y
+CONFIG_NFSD_V4=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_850=y
+CONFIG_NLS_CODEPAGE_852=y
+CONFIG_NLS_CODEPAGE_1250=y
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_2=y
+CONFIG_NLS_ISO8859_15=y
+CONFIG_NLS_UTF8=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_SECURITYFS=y
+CONFIG_CRYPTO_USER=y
+CONFIG_CRYPTO_CRYPTD=y
+CONFIG_CRYPTO_USER_API_HASH=y
+CONFIG_CRYPTO_USER_API_SKCIPHER=y
+CONFIG_CRC32_SLICEBY4=y
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y

arch/mips/configs/loongson3_defconfig

@@ -0,0 +1,362 @@
+CONFIG_MACH_LOONGSON=y
+CONFIG_SWIOTLB=y
+CONFIG_LEMOTE_MACH3A=y
+CONFIG_CPU_LOONGSON3=y
+CONFIG_64BIT=y
+CONFIG_PAGE_SIZE_16KB=y
+CONFIG_KSM=y
+CONFIG_SMP=y
+CONFIG_NR_CPUS=4
+CONFIG_HZ_256=y
+CONFIG_PREEMPT=y
+CONFIG_KEXEC=y
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_KERNEL_LZMA=y
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_AUDIT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+CONFIG_TASKSTATS=y
+CONFIG_TASK_DELAY_ACCT=y
+CONFIG_TASK_XACCT=y
+CONFIG_TASK_IO_ACCOUNTING=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_CPUSETS=y
+CONFIG_RESOURCE_COUNTERS=y
+CONFIG_MEMCG=y
+CONFIG_MEMCG_SWAP=y
+CONFIG_BLK_CGROUP=y
+CONFIG_SCHED_AUTOGROUP=y
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_RELAY=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_EMBEDDED=y
+CONFIG_MODULES=y
+CONFIG_MODULE_FORCE_LOAD=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_BLK_DEV_INTEGRITY=y
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_IOSCHED_DEADLINE=m
+CONFIG_CFQ_GROUP_IOSCHED=y
+CONFIG_PCI=y
+CONFIG_HT_PCI=y
+CONFIG_PCIEPORTBUS=y
+CONFIG_HOTPLUG_PCI_PCIE=y
+# CONFIG_PCIEAER is not set
+CONFIG_PCIEASPM_PERFORMANCE=y
+CONFIG_HOTPLUG_PCI=y
+CONFIG_HOTPLUG_PCI_SHPC=m
+CONFIG_BINFMT_MISC=m
+CONFIG_MIPS32_COMPAT=y
+CONFIG_MIPS32_O32=y
+CONFIG_MIPS32_N32=y
+CONFIG_PM_RUNTIME=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_XFRM_USER=y
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_NETFILTER=y
+CONFIG_NETFILTER_NETLINK_LOG=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_IP_VS=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_RAW=m
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
+CONFIG_IP_SCTP=m
+CONFIG_L2TP=m
+CONFIG_BRIDGE=m
+CONFIG_CFG80211=m
+CONFIG_CFG80211_WEXT=y
+CONFIG_MAC80211=m
+CONFIG_RFKILL=m
+CONFIG_RFKILL_INPUT=y
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_MTD=m
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_RAID_ATTRS=m
+CONFIG_SCSI_TGT=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_BLK_DEV_SR=y
+CONFIG_CHR_DEV_SG=y
+CONFIG_CHR_DEV_SCH=m
+CONFIG_SCSI_MULTI_LUN=y
+CONFIG_SCSI_CONSTANTS=y
+CONFIG_SCSI_LOGGING=y
+CONFIG_SCSI_SPI_ATTRS=m
+CONFIG_SCSI_FC_ATTRS=m
+CONFIG_ISCSI_TCP=m
+CONFIG_MEGARAID_NEWGEN=y
+CONFIG_MEGARAID_MM=y
+CONFIG_MEGARAID_MAILBOX=y
+CONFIG_MEGARAID_LEGACY=y
+CONFIG_MEGARAID_SAS=y
+CONFIG_ATA=y
+CONFIG_SATA_AHCI=y
+CONFIG_PATA_ATIIXP=y
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=m
+CONFIG_MD_LINEAR=m
+CONFIG_MD_RAID0=m
+CONFIG_MD_RAID1=m
+CONFIG_MD_RAID10=m
+CONFIG_MD_RAID456=m
+CONFIG_MD_MULTIPATH=m
+CONFIG_BLK_DEV_DM=m
+CONFIG_DM_CRYPT=m
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_MIRROR=m
+CONFIG_DM_ZERO=m
+CONFIG_TARGET_CORE=m
+CONFIG_TCM_IBLOCK=m
+CONFIG_TCM_FILEIO=m
+CONFIG_TCM_PSCSI=m
+CONFIG_LOOPBACK_TARGET=m
+CONFIG_ISCSI_TARGET=m
+CONFIG_NETDEVICES=y
+CONFIG_TUN=m
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_NET_VENDOR_ADAPTEC is not set
+# CONFIG_NET_VENDOR_ALTEON is not set
+# CONFIG_NET_VENDOR_AMD is not set
+# CONFIG_NET_VENDOR_ARC is not set
+# CONFIG_NET_VENDOR_ATHEROS is not set
+# CONFIG_NET_CADENCE is not set
+# CONFIG_NET_VENDOR_BROADCOM is not set
+# CONFIG_NET_VENDOR_BROCADE is not set
+# CONFIG_NET_VENDOR_CHELSIO is not set
+# CONFIG_NET_VENDOR_CIRRUS is not set
+# CONFIG_NET_VENDOR_CISCO is not set
+# CONFIG_NET_VENDOR_DEC is not set
+# CONFIG_NET_VENDOR_DLINK is not set
+# CONFIG_NET_VENDOR_EMULEX is not set
+# CONFIG_NET_VENDOR_EXAR is not set
+# CONFIG_NET_VENDOR_HP is not set
+CONFIG_E1000=y
+CONFIG_E1000E=y
+CONFIG_IGB=y
+CONFIG_IXGB=y
+CONFIG_IXGBE=y
+# CONFIG_NET_VENDOR_I825XX is not set
+# CONFIG_NET_VENDOR_MARVELL is not set
+# CONFIG_NET_VENDOR_MELLANOX is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_MYRI is not set
+# CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_NVIDIA is not set
+# CONFIG_NET_VENDOR_OKI is not set
+# CONFIG_NET_PACKET_ENGINE is not set
+# CONFIG_NET_VENDOR_QLOGIC is not set
+CONFIG_8139CP=m
+CONFIG_8139TOO=m
+CONFIG_R8169=y
+# CONFIG_NET_VENDOR_RDC is not set
+# CONFIG_NET_VENDOR_SEEQ is not set
+# CONFIG_NET_VENDOR_SILAN is not set
+# CONFIG_NET_VENDOR_SIS is not set
+# CONFIG_NET_VENDOR_SMSC is not set
+# CONFIG_NET_VENDOR_STMICRO is not set
+# CONFIG_NET_VENDOR_SUN is not set
+# CONFIG_NET_VENDOR_TEHUTI is not set
+# CONFIG_NET_VENDOR_TI is not set
+# CONFIG_NET_VENDOR_TOSHIBA is not set
+# CONFIG_NET_VENDOR_VIA is not set
+# CONFIG_NET_VENDOR_WIZNET is not set
+CONFIG_PPP=m
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_MPPE=m
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPPOE=m
+CONFIG_PPPOL2TP=m
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_ATH_CARDS=m
+CONFIG_ATH9K=m
+CONFIG_HOSTAP=m
+CONFIG_INPUT_POLLDEV=m
+CONFIG_INPUT_SPARSEKMAP=y
+CONFIG_INPUT_EVDEV=y
+CONFIG_KEYBOARD_XTKBD=m
+CONFIG_MOUSE_PS2_SENTELIC=y
+CONFIG_MOUSE_SERIAL=m
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_UINPUT=m
+CONFIG_SERIO_SERPORT=m
+CONFIG_SERIO_RAW=m
+CONFIG_LEGACY_PTY_COUNT=16
+CONFIG_SERIAL_NONSTANDARD=y
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=16
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_RSA=y
+CONFIG_HW_RANDOM=y
+CONFIG_RAW_DRIVER=m
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_PIIX4=y
+CONFIG_SENSORS_LM75=m
+CONFIG_SENSORS_LM93=m
+CONFIG_SENSORS_W83627HF=m
+CONFIG_MEDIA_SUPPORT=m
+CONFIG_MEDIA_CAMERA_SUPPORT=y
+CONFIG_MEDIA_USB_SUPPORT=y
+CONFIG_USB_VIDEO_CLASS=m
+CONFIG_DRM=y
+CONFIG_DRM_RADEON=y
+CONFIG_VIDEO_OUTPUT_CONTROL=y
+CONFIG_FB_RADEON=y
+CONFIG_LCD_CLASS_DEVICE=y
+CONFIG_LCD_PLATFORM=m
+CONFIG_BACKLIGHT_GENERIC=m
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
+CONFIG_LOGO=y
+CONFIG_SOUND=y
+CONFIG_SND=m
+CONFIG_SND_SEQUENCER=m
+CONFIG_SND_SEQ_DUMMY=m
+# CONFIG_SND_ISA is not set
+CONFIG_SND_HDA_INTEL=m
+CONFIG_SND_HDA_PATCH_LOADER=y
+CONFIG_SND_HDA_CODEC_REALTEK=m
+CONFIG_SND_HDA_CODEC_CONEXANT=m
+# CONFIG_SND_USB is not set
+CONFIG_HID_A4TECH=m
+CONFIG_HID_SUNPLUS=m
+CONFIG_USB=y
+CONFIG_USB_MON=y
+CONFIG_USB_XHCI_HCD=m
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_UHCI_HCD=m
+CONFIG_USB_STORAGE=m
+CONFIG_USB_SERIAL=m
+CONFIG_USB_SERIAL_OPTION=m
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_CMOS=y
+CONFIG_DMADEVICES=y
+CONFIG_PM_DEVFREQ=y
+CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=y
+CONFIG_DEVFREQ_GOV_PERFORMANCE=y
+CONFIG_DEVFREQ_GOV_POWERSAVE=y
+CONFIG_DEVFREQ_GOV_USERSPACE=y
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+CONFIG_EXT4_FS=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXT4_FS_SECURITY=y
+CONFIG_QUOTA=y
+# CONFIG_PRINT_QUOTA_WARNING is not set
+CONFIG_AUTOFS4_FS=y
+CONFIG_FUSE_FS=m
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=936
+CONFIG_FAT_DEFAULT_IOCHARSET="gb2312"
+CONFIG_PROC_KCORE=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_CONFIGFS_FS=y
+CONFIG_CRAMFS=m
+CONFIG_SQUASHFS=y
+CONFIG_SQUASHFS_XATTR=y
+CONFIG_NFS_FS=m
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=m
+CONFIG_NFSD=m
+CONFIG_NFSD_V3_ACL=y
+CONFIG_NFSD_V4=y
+CONFIG_CIFS=m
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_936=y
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_UTF8=y
+CONFIG_PRINTK_TIME=y
+CONFIG_FRAME_WARN=1024
+CONFIG_STRIP_ASM_SYMS=y
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_DEBUG_PREEMPT is not set
+# CONFIG_RCU_CPU_STALL_VERBOSE is not set
+# CONFIG_FTRACE is not set
+CONFIG_SECURITY=y
+CONFIG_SECURITYFS=y
+CONFIG_SECURITY_NETWORK=y
+CONFIG_SECURITY_PATH=y
+CONFIG_SECURITY_SELINUX=y
+CONFIG_SECURITY_SELINUX_BOOTPARAM=y
+CONFIG_SECURITY_SELINUX_DISABLE=y
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_KHAZAD=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_DEFLATE=m

arch/mips/configs/malta_defconfig

@@ -1,7 +1,9 @@
 CONFIG_MIPS_MALTA=y
 CONFIG_CPU_LITTLE_ENDIAN=y
 CONFIG_CPU_MIPS32_R2=y
+CONFIG_PAGE_SIZE_16KB=y
 CONFIG_MIPS_MT_SMP=y
+CONFIG_NR_CPUS=8
 CONFIG_HZ_100=y
 CONFIG_SYSVIPC=y
 CONFIG_NO_HZ=y
@@ -42,7 +44,6 @@ CONFIG_INET_IPCOMP=m
 CONFIG_INET_XFRM_MODE_TRANSPORT=m
 CONFIG_INET_XFRM_MODE_TUNNEL=m
 CONFIG_TCP_MD5SIG=y
-CONFIG_IPV6_PRIVACY=y
 CONFIG_IPV6_ROUTER_PREF=y
 CONFIG_IPV6_ROUTE_INFO=y
 CONFIG_IPV6_OPTIMISTIC_DAD=y
@@ -68,7 +69,6 @@ CONFIG_NF_CONNTRACK_SANE=m
 CONFIG_NF_CONNTRACK_SIP=m
 CONFIG_NF_CONNTRACK_TFTP=m
 CONFIG_NF_CT_NETLINK=m
-CONFIG_NETFILTER_TPROXY=m
 CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
 CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
 CONFIG_NETFILTER_XT_TARGET_MARK=m
@@ -125,7 +125,6 @@ CONFIG_IP_VS_SH=m
 CONFIG_IP_VS_SED=m
 CONFIG_IP_VS_NQ=m
 CONFIG_NF_CONNTRACK_IPV4=m
-CONFIG_IP_NF_QUEUE=m
 CONFIG_IP_NF_IPTABLES=m
 CONFIG_IP_NF_MATCH_AH=m
 CONFIG_IP_NF_MATCH_ECN=m
@@ -185,7 +184,6 @@ CONFIG_ATALK=m
 CONFIG_DEV_APPLETALK=m
 CONFIG_IPDDP=m
 CONFIG_IPDDP_ENCAP=y
-CONFIG_IPDDP_DECAP=y
 CONFIG_PHONET=m
 CONFIG_NET_SCHED=y
 CONFIG_NET_SCH_CBQ=m
@@ -226,9 +224,9 @@ CONFIG_MAC80211_RC_DEFAULT_PID=y
 CONFIG_MAC80211_MESH=y
 CONFIG_RFKILL=m
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
 CONFIG_CONNECTOR=m
 CONFIG_MTD=y
-CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_OOPS=m
 CONFIG_MTD_CFI=y
@@ -328,7 +326,6 @@ CONFIG_LIBERTAS=m
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_SERIO_I8042 is not set
-CONFIG_VT_HW_CONSOLE_BINDING=y
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 # CONFIG_HWMON is not set

arch/mips/configs/malta_kvm_defconfig

@@ -3,6 +3,7 @@ CONFIG_CPU_LITTLE_ENDIAN=y
 CONFIG_CPU_MIPS32_R2=y
 CONFIG_PAGE_SIZE_16KB=y
 CONFIG_MIPS_MT_SMP=y
+CONFIG_NR_CPUS=8
 CONFIG_HZ_100=y
 CONFIG_SYSVIPC=y
 CONFIG_NO_HZ=y
@@ -44,7 +45,6 @@ CONFIG_INET_IPCOMP=m
 CONFIG_INET_XFRM_MODE_TRANSPORT=m
 CONFIG_INET_XFRM_MODE_TUNNEL=m
 CONFIG_TCP_MD5SIG=y
-CONFIG_IPV6_PRIVACY=y
 CONFIG_IPV6_ROUTER_PREF=y
 CONFIG_IPV6_ROUTE_INFO=y
 CONFIG_IPV6_OPTIMISTIC_DAD=y
@@ -70,7 +70,6 @@ CONFIG_NF_CONNTRACK_SANE=m
 CONFIG_NF_CONNTRACK_SIP=m
 CONFIG_NF_CONNTRACK_TFTP=m
 CONFIG_NF_CT_NETLINK=m
-CONFIG_NETFILTER_TPROXY=m
 CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
 CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
 CONFIG_NETFILTER_XT_TARGET_MARK=m
@@ -127,7 +126,6 @@ CONFIG_IP_VS_SH=m
 CONFIG_IP_VS_SED=m
 CONFIG_IP_VS_NQ=m
 CONFIG_NF_CONNTRACK_IPV4=m
-CONFIG_IP_NF_QUEUE=m
 CONFIG_IP_NF_IPTABLES=m
 CONFIG_IP_NF_MATCH_AH=m
 CONFIG_IP_NF_MATCH_ECN=m
@@ -187,7 +185,6 @@ CONFIG_ATALK=m
 CONFIG_DEV_APPLETALK=m
 CONFIG_IPDDP=m
 CONFIG_IPDDP_ENCAP=y
-CONFIG_IPDDP_DECAP=y
 CONFIG_PHONET=m
 CONFIG_NET_SCHED=y
 CONFIG_NET_SCH_CBQ=m
@@ -228,9 +225,9 @@ CONFIG_MAC80211_RC_DEFAULT_PID=y
 CONFIG_MAC80211_MESH=y
 CONFIG_RFKILL=m
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
 CONFIG_CONNECTOR=m
 CONFIG_MTD=y
-CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_OOPS=m
 CONFIG_MTD_CFI=y
@@ -300,6 +297,7 @@ CONFIG_IFB=m
 CONFIG_MACVLAN=m
 CONFIG_TUN=m
 CONFIG_VETH=m
+CONFIG_VHOST_NET=m
 CONFIG_PCNET32=y
 CONFIG_CHELSIO_T3=m
 CONFIG_AX88796=m
@@ -329,7 +327,6 @@ CONFIG_LIBERTAS=m
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_SERIO_I8042 is not set
-CONFIG_VT_HW_CONSOLE_BINDING=y
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 # CONFIG_HWMON is not set
@@ -453,4 +450,3 @@ CONFIG_VIRTUALIZATION=y
 CONFIG_KVM=m
 CONFIG_KVM_MIPS_DYN_TRANS=y
 CONFIG_KVM_MIPS_DEBUG_COP0_COUNTERS=y
-CONFIG_VHOST_NET=m

arch/mips/configs/malta_kvm_guest_defconfig

@@ -44,7 +44,6 @@ CONFIG_INET_IPCOMP=m
 CONFIG_INET_XFRM_MODE_TRANSPORT=m
 CONFIG_INET_XFRM_MODE_TUNNEL=m
 CONFIG_TCP_MD5SIG=y
-CONFIG_IPV6_PRIVACY=y
 CONFIG_IPV6_ROUTER_PREF=y
 CONFIG_IPV6_ROUTE_INFO=y
 CONFIG_IPV6_OPTIMISTIC_DAD=y
@@ -70,7 +69,6 @@ CONFIG_NF_CONNTRACK_SANE=m
 CONFIG_NF_CONNTRACK_SIP=m
 CONFIG_NF_CONNTRACK_TFTP=m
 CONFIG_NF_CT_NETLINK=m
-CONFIG_NETFILTER_TPROXY=m
 CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
 CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
 CONFIG_NETFILTER_XT_TARGET_MARK=m
@@ -127,7 +125,6 @@ CONFIG_IP_VS_SH=m
 CONFIG_IP_VS_SED=m
 CONFIG_IP_VS_NQ=m
 CONFIG_NF_CONNTRACK_IPV4=m
-CONFIG_IP_NF_QUEUE=m
 CONFIG_IP_NF_IPTABLES=m
 CONFIG_IP_NF_MATCH_AH=m
 CONFIG_IP_NF_MATCH_ECN=m
@@ -187,7 +184,6 @@ CONFIG_ATALK=m
 CONFIG_DEV_APPLETALK=m
 CONFIG_IPDDP=m
 CONFIG_IPDDP_ENCAP=y
-CONFIG_IPDDP_DECAP=y
 CONFIG_PHONET=m
 CONFIG_NET_SCHED=y
 CONFIG_NET_SCH_CBQ=m
@@ -228,9 +224,9 @@ CONFIG_MAC80211_RC_DEFAULT_PID=y
 CONFIG_MAC80211_MESH=y
 CONFIG_RFKILL=m
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
 CONFIG_CONNECTOR=m
 CONFIG_MTD=y
-CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_OOPS=m
 CONFIG_MTD_CFI=y
@@ -331,7 +327,6 @@ CONFIG_LIBERTAS=m
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_SERIO_I8042 is not set
-CONFIG_VT_HW_CONSOLE_BINDING=y
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 # CONFIG_HWMON is not set

arch/mips/configs/maltaaprp_defconfig

@@ -44,7 +44,6 @@ CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
 CONFIG_INET_IPCOMP=m
 # CONFIG_INET_LRO is not set
-CONFIG_IPV6_PRIVACY=y
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
 CONFIG_INET6_IPCOMP=m
@@ -55,7 +54,6 @@ CONFIG_ATALK=m
 CONFIG_DEV_APPLETALK=m
 CONFIG_IPDDP=m
 CONFIG_IPDDP_ENCAP=y
-CONFIG_IPDDP_DECAP=y
 CONFIG_NET_SCHED=y
 CONFIG_NET_SCH_CBQ=m
 CONFIG_NET_SCH_HTB=m
@@ -80,6 +78,7 @@ CONFIG_NET_CLS_ACT=y
 CONFIG_NET_ACT_POLICE=y
 CONFIG_NET_CLS_IND=y
 # CONFIG_WIRELESS is not set
+CONFIG_DEVTMPFS=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_CRYPTOLOOP=m
 CONFIG_IDE=y

arch/mips/configs/maltasmtc_defconfig

@@ -1,6 +1,7 @@
 CONFIG_MIPS_MALTA=y
 CONFIG_CPU_LITTLE_ENDIAN=y
 CONFIG_CPU_MIPS32_R2=y
+CONFIG_PAGE_SIZE_16KB=y
 CONFIG_MIPS_MT_SMTC=y
 # CONFIG_MIPS_MT_FPAFF is not set
 CONFIG_NR_CPUS=9
@@ -45,7 +46,6 @@ CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
 CONFIG_INET_IPCOMP=m
 # CONFIG_INET_LRO is not set
-CONFIG_IPV6_PRIVACY=y
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
 CONFIG_INET6_IPCOMP=m
@@ -56,7 +56,6 @@ CONFIG_ATALK=m
 CONFIG_DEV_APPLETALK=m
 CONFIG_IPDDP=m
 CONFIG_IPDDP_ENCAP=y
-CONFIG_IPDDP_DECAP=y
 CONFIG_NET_SCHED=y
 CONFIG_NET_SCH_CBQ=m
 CONFIG_NET_SCH_HTB=m
@@ -81,6 +80,7 @@ CONFIG_NET_CLS_ACT=y
 CONFIG_NET_ACT_POLICE=y
 CONFIG_NET_CLS_IND=y
 # CONFIG_WIRELESS is not set
+CONFIG_DEVTMPFS=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_CRYPTOLOOP=m
 CONFIG_IDE=y

arch/mips/configs/maltasmvp_defconfig

@@ -1,10 +1,11 @@
 CONFIG_MIPS_MALTA=y
 CONFIG_CPU_LITTLE_ENDIAN=y
 CONFIG_CPU_MIPS32_R2=y
+CONFIG_PAGE_SIZE_16KB=y
 CONFIG_MIPS_MT_SMP=y
 CONFIG_SCHED_SMT=y
 CONFIG_MIPS_CMP=y
-CONFIG_NR_CPUS=2
+CONFIG_NR_CPUS=8
 CONFIG_HZ_100=y
 CONFIG_LOCALVERSION="cmp"
 CONFIG_SYSVIPC=y
@@ -47,7 +48,6 @@ CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
 CONFIG_INET_IPCOMP=m
 # CONFIG_INET_LRO is not set
-CONFIG_IPV6_PRIVACY=y
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
 CONFIG_INET6_IPCOMP=m
@@ -82,6 +82,7 @@ CONFIG_NET_CLS_ACT=y
 CONFIG_NET_ACT_POLICE=y
 CONFIG_NET_CLS_IND=y
 # CONFIG_WIRELESS is not set
+CONFIG_DEVTMPFS=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_CRYPTOLOOP=m
 CONFIG_IDE=y

arch/mips/configs/maltasmvp_eva_defconfig

@@ -0,0 +1,200 @@
+CONFIG_MIPS_MALTA=y
+CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_CPU_MIPS32_R2=y
+CONFIG_CPU_MIPS32_3_5_FEATURES=y
+CONFIG_PAGE_SIZE_16KB=y
+CONFIG_MIPS_MT_SMP=y
+CONFIG_SCHED_SMT=y
+CONFIG_MIPS_CMP=y
+CONFIG_NR_CPUS=8
+CONFIG_HZ_100=y
+CONFIG_LOCALVERSION="cmp"
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_AUDIT=y
+CONFIG_NO_HZ=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=15
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_EMBEDDED=y
+CONFIG_SLAB=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+# CONFIG_BLK_DEV_BSG is not set
+CONFIG_PCI=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_XFRM_USER=m
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_NET_IPIP=m
+CONFIG_IP_MROUTE=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+CONFIG_SYN_COOKIES=y
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+CONFIG_INET_IPCOMP=m
+# CONFIG_INET_LRO is not set
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+CONFIG_IPV6_TUNNEL=m
+CONFIG_BRIDGE=m
+CONFIG_VLAN_8021Q=m
+CONFIG_ATALK=m
+CONFIG_DEV_APPLETALK=m
+CONFIG_IPDDP=m
+CONFIG_IPDDP_ENCAP=y
+CONFIG_NET_SCHED=y
+CONFIG_NET_SCH_CBQ=m
+CONFIG_NET_SCH_HTB=m
+CONFIG_NET_SCH_HFSC=m
+CONFIG_NET_SCH_PRIO=m
+CONFIG_NET_SCH_RED=m
+CONFIG_NET_SCH_SFQ=m
+CONFIG_NET_SCH_TEQL=m
+CONFIG_NET_SCH_TBF=m
+CONFIG_NET_SCH_GRED=m
+CONFIG_NET_SCH_DSMARK=m
+CONFIG_NET_SCH_NETEM=m
+CONFIG_NET_SCH_INGRESS=m
+CONFIG_NET_CLS_BASIC=m
+CONFIG_NET_CLS_TCINDEX=m
+CONFIG_NET_CLS_ROUTE4=m
+CONFIG_NET_CLS_FW=m
+CONFIG_NET_CLS_U32=m
+CONFIG_NET_CLS_RSVP=m
+CONFIG_NET_CLS_RSVP6=m
+CONFIG_NET_CLS_ACT=y
+CONFIG_NET_ACT_POLICE=y
+CONFIG_NET_CLS_IND=y
+# CONFIG_WIRELESS is not set
+CONFIG_DEVTMPFS=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_IDE=y
+# CONFIG_IDE_PROC_FS is not set
+# CONFIG_IDEPCI_PCIBUS_ORDER is not set
+CONFIG_BLK_DEV_GENERIC=y
+CONFIG_BLK_DEV_PIIX=y
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_SG=y
+# CONFIG_SCSI_LOWLEVEL is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_NET_VENDOR_ADAPTEC is not set
+# CONFIG_NET_VENDOR_ALTEON is not set
+CONFIG_PCNET32=y
+# CONFIG_NET_VENDOR_ATHEROS is not set
+# CONFIG_NET_VENDOR_BROADCOM is not set
+# CONFIG_NET_VENDOR_BROCADE is not set
+# CONFIG_NET_VENDOR_CHELSIO is not set
+# CONFIG_NET_VENDOR_CISCO is not set
+# CONFIG_NET_VENDOR_DEC is not set
+# CONFIG_NET_VENDOR_DLINK is not set
+# CONFIG_NET_VENDOR_EMULEX is not set
+# CONFIG_NET_VENDOR_EXAR is not set
+# CONFIG_NET_VENDOR_HP is not set
+# CONFIG_NET_VENDOR_INTEL is not set
+# CONFIG_NET_VENDOR_MARVELL is not set
+# CONFIG_NET_VENDOR_MELLANOX is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_MYRI is not set
+# CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_NVIDIA is not set
+# CONFIG_NET_VENDOR_OKI is not set
+# CONFIG_NET_PACKET_ENGINE is not set
+# CONFIG_NET_VENDOR_QLOGIC is not set
+# CONFIG_NET_VENDOR_REALTEK is not set
+# CONFIG_NET_VENDOR_RDC is not set
+# CONFIG_NET_VENDOR_SEEQ is not set
+# CONFIG_NET_VENDOR_SILAN is not set
+# CONFIG_NET_VENDOR_SIS is not set
+# CONFIG_NET_VENDOR_SMSC is not set
+# CONFIG_NET_VENDOR_STMICRO is not set
+# CONFIG_NET_VENDOR_SUN is not set
+# CONFIG_NET_VENDOR_TEHUTI is not set
+# CONFIG_NET_VENDOR_TI is not set
+# CONFIG_NET_VENDOR_TOSHIBA is not set
+# CONFIG_NET_VENDOR_VIA is not set
+# CONFIG_NET_VENDOR_WIZNET is not set
+# CONFIG_WLAN is not set
+# CONFIG_VT is not set
+CONFIG_LEGACY_PTY_COUNT=4
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_HW_RANDOM=y
+# CONFIG_HWMON is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+CONFIG_FB=y
+CONFIG_FIRMWARE_EDID=y
+CONFIG_FB_MATROX=y
+CONFIG_FB_MATROX_G=y
+CONFIG_USB=y
+CONFIG_USB_EHCI_HCD=y
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+CONFIG_USB_UHCI_HCD=y
+CONFIG_USB_STORAGE=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_IDE_DISK=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_BACKLIGHT=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_CMOS=y
+CONFIG_EXT2_FS=y
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_XFS_FS=y
+CONFIG_XFS_QUOTA=y
+CONFIG_XFS_POSIX_ACL=y
+CONFIG_QUOTA=y
+CONFIG_QFMT_V2=y
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_PROC_KCORE=y
+CONFIG_TMPFS=y
+CONFIG_NFS_FS=y
+CONFIG_ROOT_NFS=y
+CONFIG_CIFS=m
+CONFIG_CIFS_WEAK_PW_HASH=y
+CONFIG_CIFS_XATTR=y
+CONFIG_CIFS_POSIX=y
+CONFIG_NLS_CODEPAGE_437=m
+CONFIG_NLS_ISO8859_1=m
+# CONFIG_FTRACE is not set
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_KHAZAD=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set

arch/mips/configs/maltaup_defconfig

@@ -43,7 +43,6 @@ CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
 CONFIG_INET_IPCOMP=m
 # CONFIG_INET_LRO is not set
-CONFIG_IPV6_PRIVACY=y
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
 CONFIG_INET6_IPCOMP=m
@@ -54,7 +53,6 @@ CONFIG_ATALK=m
 CONFIG_DEV_APPLETALK=m
 CONFIG_IPDDP=m
 CONFIG_IPDDP_ENCAP=y
-CONFIG_IPDDP_DECAP=y
 CONFIG_NET_SCHED=y
 CONFIG_NET_SCH_CBQ=m
 CONFIG_NET_SCH_HTB=m
@@ -79,6 +77,7 @@ CONFIG_NET_CLS_ACT=y
 CONFIG_NET_ACT_POLICE=y
 CONFIG_NET_CLS_IND=y
 # CONFIG_WIRELESS is not set
+CONFIG_DEVTMPFS=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_CRYPTOLOOP=m
 CONFIG_IDE=y

arch/mips/include/asm/asm-eva.h

@@ -0,0 +1,135 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2014 Imagination Technologies Ltd.
+ *
+ */
+
+#ifndef __ASM_ASM_EVA_H
+#define __ASM_ASM_EVA_H
+
+#ifndef __ASSEMBLY__
+#ifdef CONFIG_EVA
+
+#define __BUILD_EVA_INSN(insn, reg, addr)				\
+				"	.set	push\n"			\
+				"	.set	mips0\n"		\
+				"	.set	eva\n"			\
+				"	"insn" "reg", "addr "\n"	\
+				"	.set	pop\n"
+
+#define user_cache(op, base)		__BUILD_EVA_INSN("cachee", op, base)
+#define user_ll(reg, addr)		__BUILD_EVA_INSN("lle", reg, addr)
+#define user_sc(reg, addr)		__BUILD_EVA_INSN("sce", reg, addr)
+#define user_lw(reg, addr)		__BUILD_EVA_INSN("lwe", reg, addr)
+#define user_lwl(reg, addr)		__BUILD_EVA_INSN("lwle", reg, addr)
+#define user_lwr(reg, addr)		__BUILD_EVA_INSN("lwre", reg, addr)
+#define user_lh(reg, addr)		__BUILD_EVA_INSN("lhe", reg, addr)
+#define user_lb(reg, addr)		__BUILD_EVA_INSN("lbe", reg, addr)
+#define user_lbu(reg, addr)		__BUILD_EVA_INSN("lbue", reg, addr)
+/* No 64-bit EVA instruction for loading double words */
+#define user_ld(reg, addr)		user_lw(reg, addr)
+#define user_sw(reg, addr)		__BUILD_EVA_INSN("swe", reg, addr)
+#define user_swl(reg, addr)		__BUILD_EVA_INSN("swle", reg, addr)
+#define user_swr(reg, addr)		__BUILD_EVA_INSN("swre", reg, addr)
+#define user_sh(reg, addr)		__BUILD_EVA_INSN("she", reg, addr)
+#define user_sb(reg, addr)		__BUILD_EVA_INSN("sbe", reg, addr)
+/* No 64-bit EVA instruction for storing double words */
+#define user_sd(reg, addr)		user_sw(reg, addr)
+
+#else
+
+#define user_cache(op, base)		"cache " op ", " base "\n"
+#define user_ll(reg, addr)		"ll " reg ", " addr "\n"
+#define user_sc(reg, addr)		"sc " reg ", " addr "\n"
+#define user_lw(reg, addr)		"lw " reg ", " addr "\n"
+#define user_lwl(reg, addr)		"lwl " reg ", " addr "\n"
+#define user_lwr(reg, addr)		"lwr " reg ", " addr "\n"
+#define user_lh(reg, addr)		"lh " reg ", " addr "\n"
+#define user_lb(reg, addr)		"lb " reg ", " addr "\n"
+#define user_lbu(reg, addr)		"lbu " reg ", " addr "\n"
+#define user_sw(reg, addr)		"sw " reg ", " addr "\n"
+#define user_swl(reg, addr)		"swl " reg ", " addr "\n"
+#define user_swr(reg, addr)		"swr " reg ", " addr "\n"
+#define user_sh(reg, addr)		"sh " reg ", " addr "\n"
+#define user_sb(reg, addr)		"sb " reg ", " addr "\n"
+
+#ifdef CONFIG_32BIT
+/*
+ * No 'sd' or 'ld' instructions in 32-bit but the code will
+ * do the correct thing
+ */
+#define user_sd(reg, addr)		user_sw(reg, addr)
+#define user_ld(reg, addr)		user_lw(reg, addr)
+#else
+#define user_sd(reg, addr)		"sd " reg", " addr "\n"
+#define user_ld(reg, addr)		"ld " reg", " addr "\n"
+#endif /* CONFIG_32BIT */
+
+#endif /* CONFIG_EVA */
+
+#else /* __ASSEMBLY__ */
+
+#ifdef CONFIG_EVA
+
+#define __BUILD_EVA_INSN(insn, reg, addr)			\
+				.set	push;			\
+				.set	mips0;			\
+				.set	eva;			\
+				insn reg, addr;			\
+				.set	pop;
+
+#define user_cache(op, base)		__BUILD_EVA_INSN(cachee, op, base)
+#define user_ll(reg, addr)		__BUILD_EVA_INSN(lle, reg, addr)
+#define user_sc(reg, addr)		__BUILD_EVA_INSN(sce, reg, addr)
+#define user_lw(reg, addr)		__BUILD_EVA_INSN(lwe, reg, addr)
+#define user_lwl(reg, addr)		__BUILD_EVA_INSN(lwle, reg, addr)
+#define user_lwr(reg, addr)		__BUILD_EVA_INSN(lwre, reg, addr)
+#define user_lh(reg, addr)		__BUILD_EVA_INSN(lhe, reg, addr)
+#define user_lb(reg, addr)		__BUILD_EVA_INSN(lbe, reg, addr)
+#define user_lbu(reg, addr)		__BUILD_EVA_INSN(lbue, reg, addr)
+/* No 64-bit EVA instruction for loading double words */
+#define user_ld(reg, addr)		user_lw(reg, addr)
+#define user_sw(reg, addr)		__BUILD_EVA_INSN(swe, reg, addr)
+#define user_swl(reg, addr)		__BUILD_EVA_INSN(swle, reg, addr)
+#define user_swr(reg, addr)		__BUILD_EVA_INSN(swre, reg, addr)
+#define user_sh(reg, addr)		__BUILD_EVA_INSN(she, reg, addr)
+#define user_sb(reg, addr)		__BUILD_EVA_INSN(sbe, reg, addr)
+/* No 64-bit EVA instruction for loading double words */
+#define user_sd(reg, addr)		user_sw(reg, addr)
+#else
+
+#define user_cache(op, base)		cache op, base
+#define user_ll(reg, addr)		ll reg, addr
+#define user_sc(reg, addr)		sc reg, addr
+#define user_lw(reg, addr)		lw reg, addr
+#define user_lwl(reg, addr)		lwl reg, addr
+#define user_lwr(reg, addr)		lwr reg, addr
+#define user_lh(reg, addr)		lh reg, addr
+#define user_lb(reg, addr)		lb reg, addr
+#define user_lbu(reg, addr)		lbu reg, addr
+#define user_sw(reg, addr)		sw reg, addr
+#define user_swl(reg, addr)		swl reg, addr
+#define user_swr(reg, addr)		swr reg, addr
+#define user_sh(reg, addr)		sh reg, addr
+#define user_sb(reg, addr)		sb reg, addr
+
+#ifdef CONFIG_32BIT
+/*
+ * No 'sd' or 'ld' instructions in 32-bit but the code will
+ * do the correct thing
+ */
+#define user_sd(reg, addr)		user_sw(reg, addr)
+#define user_ld(reg, addr)		user_lw(reg, addr)
+#else
+#define user_sd(reg, addr)		sd reg, addr
+#define user_ld(reg, addr)		ld reg, addr
+#endif /* CONFIG_32BIT */
+
+#endif /* CONFIG_EVA */
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* __ASM_ASM_EVA_H */

arch/mips/include/asm/asm.h

@@ -18,6 +18,7 @@
 #define __ASM_ASM_H
 
 #include <asm/sgidefs.h>
+#include <asm/asm-eva.h>
 
 #ifndef CAT
 #ifdef __STDC__
@@ -145,19 +146,27 @@ symbol		=	value
 
 #define PREF(hint,addr)					\
 		.set	push;				\
-		.set	mips4;				\
+		.set	arch=r5000;			\
 		pref	hint, addr;			\
 		.set	pop
 
+#define PREFE(hint, addr)				\
+		.set	push;				\
+		.set	mips0;				\
+		.set	eva;				\
+		prefe	hint, addr;			\
+		.set	pop
+
 #define PREFX(hint,addr)				\
 		.set	push;				\
-		.set	mips4;				\
+		.set	arch=r5000;			\
 		prefx	hint, addr;			\
 		.set	pop
 
 #else /* !CONFIG_CPU_HAS_PREFETCH */
 
 #define PREF(hint, addr)
+#define PREFE(hint, addr)
 #define PREFX(hint, addr)
 
 #endif /* !CONFIG_CPU_HAS_PREFETCH */

arch/mips/include/asm/asmmacro-32.h

@@ -14,75 +14,75 @@
 
 	.macro	fpu_save_single thread tmp=t0
 	cfc1	\tmp,  fcr31
-	swc1	$f0,  THREAD_FPR0(\thread)
-	swc1	$f1,  THREAD_FPR1(\thread)
-	swc1	$f2,  THREAD_FPR2(\thread)
-	swc1	$f3,  THREAD_FPR3(\thread)
-	swc1	$f4,  THREAD_FPR4(\thread)
-	swc1	$f5,  THREAD_FPR5(\thread)
-	swc1	$f6,  THREAD_FPR6(\thread)
-	swc1	$f7,  THREAD_FPR7(\thread)
-	swc1	$f8,  THREAD_FPR8(\thread)
-	swc1	$f9,  THREAD_FPR9(\thread)
-	swc1	$f10, THREAD_FPR10(\thread)
-	swc1	$f11, THREAD_FPR11(\thread)
-	swc1	$f12, THREAD_FPR12(\thread)
-	swc1	$f13, THREAD_FPR13(\thread)
-	swc1	$f14, THREAD_FPR14(\thread)
-	swc1	$f15, THREAD_FPR15(\thread)
-	swc1	$f16, THREAD_FPR16(\thread)
-	swc1	$f17, THREAD_FPR17(\thread)
-	swc1	$f18, THREAD_FPR18(\thread)
-	swc1	$f19, THREAD_FPR19(\thread)
-	swc1	$f20, THREAD_FPR20(\thread)
-	swc1	$f21, THREAD_FPR21(\thread)
-	swc1	$f22, THREAD_FPR22(\thread)
-	swc1	$f23, THREAD_FPR23(\thread)
-	swc1	$f24, THREAD_FPR24(\thread)
-	swc1	$f25, THREAD_FPR25(\thread)
-	swc1	$f26, THREAD_FPR26(\thread)
-	swc1	$f27, THREAD_FPR27(\thread)
-	swc1	$f28, THREAD_FPR28(\thread)
-	swc1	$f29, THREAD_FPR29(\thread)
-	swc1	$f30, THREAD_FPR30(\thread)
-	swc1	$f31, THREAD_FPR31(\thread)
+	swc1	$f0,  THREAD_FPR0_LS64(\thread)
+	swc1	$f1,  THREAD_FPR1_LS64(\thread)
+	swc1	$f2,  THREAD_FPR2_LS64(\thread)
+	swc1	$f3,  THREAD_FPR3_LS64(\thread)
+	swc1	$f4,  THREAD_FPR4_LS64(\thread)
+	swc1	$f5,  THREAD_FPR5_LS64(\thread)
+	swc1	$f6,  THREAD_FPR6_LS64(\thread)
+	swc1	$f7,  THREAD_FPR7_LS64(\thread)
+	swc1	$f8,  THREAD_FPR8_LS64(\thread)
+	swc1	$f9,  THREAD_FPR9_LS64(\thread)
+	swc1	$f10, THREAD_FPR10_LS64(\thread)
+	swc1	$f11, THREAD_FPR11_LS64(\thread)
+	swc1	$f12, THREAD_FPR12_LS64(\thread)
+	swc1	$f13, THREAD_FPR13_LS64(\thread)
+	swc1	$f14, THREAD_FPR14_LS64(\thread)
+	swc1	$f15, THREAD_FPR15_LS64(\thread)
+	swc1	$f16, THREAD_FPR16_LS64(\thread)
+	swc1	$f17, THREAD_FPR17_LS64(\thread)
+	swc1	$f18, THREAD_FPR18_LS64(\thread)
+	swc1	$f19, THREAD_FPR19_LS64(\thread)
+	swc1	$f20, THREAD_FPR20_LS64(\thread)
+	swc1	$f21, THREAD_FPR21_LS64(\thread)
+	swc1	$f22, THREAD_FPR22_LS64(\thread)
+	swc1	$f23, THREAD_FPR23_LS64(\thread)
+	swc1	$f24, THREAD_FPR24_LS64(\thread)
+	swc1	$f25, THREAD_FPR25_LS64(\thread)
+	swc1	$f26, THREAD_FPR26_LS64(\thread)
+	swc1	$f27, THREAD_FPR27_LS64(\thread)
+	swc1	$f28, THREAD_FPR28_LS64(\thread)
+	swc1	$f29, THREAD_FPR29_LS64(\thread)
+	swc1	$f30, THREAD_FPR30_LS64(\thread)
+	swc1	$f31, THREAD_FPR31_LS64(\thread)
 	sw	\tmp, THREAD_FCR31(\thread)
 	.endm
 
 	.macro	fpu_restore_single thread tmp=t0
 	lw	\tmp, THREAD_FCR31(\thread)
-	lwc1	$f0,  THREAD_FPR0(\thread)
-	lwc1	$f1,  THREAD_FPR1(\thread)
-	lwc1	$f2,  THREAD_FPR2(\thread)
-	lwc1	$f3,  THREAD_FPR3(\thread)
-	lwc1	$f4,  THREAD_FPR4(\thread)
-	lwc1	$f5,  THREAD_FPR5(\thread)
-	lwc1	$f6,  THREAD_FPR6(\thread)
-	lwc1	$f7,  THREAD_FPR7(\thread)
-	lwc1	$f8,  THREAD_FPR8(\thread)
-	lwc1	$f9,  THREAD_FPR9(\thread)
-	lwc1	$f10, THREAD_FPR10(\thread)
-	lwc1	$f11, THREAD_FPR11(\thread)
-	lwc1	$f12, THREAD_FPR12(\thread)
-	lwc1	$f13, THREAD_FPR13(\thread)
-	lwc1	$f14, THREAD_FPR14(\thread)
-	lwc1	$f15, THREAD_FPR15(\thread)
-	lwc1	$f16, THREAD_FPR16(\thread)
-	lwc1	$f17, THREAD_FPR17(\thread)
-	lwc1	$f18, THREAD_FPR18(\thread)
-	lwc1	$f19, THREAD_FPR19(\thread)
-	lwc1	$f20, THREAD_FPR20(\thread)
-	lwc1	$f21, THREAD_FPR21(\thread)
-	lwc1	$f22, THREAD_FPR22(\thread)
-	lwc1	$f23, THREAD_FPR23(\thread)
-	lwc1	$f24, THREAD_FPR24(\thread)
-	lwc1	$f25, THREAD_FPR25(\thread)
-	lwc1	$f26, THREAD_FPR26(\thread)
-	lwc1	$f27, THREAD_FPR27(\thread)
-	lwc1	$f28, THREAD_FPR28(\thread)
-	lwc1	$f29, THREAD_FPR29(\thread)
-	lwc1	$f30, THREAD_FPR30(\thread)
-	lwc1	$f31, THREAD_FPR31(\thread)
+	lwc1	$f0,  THREAD_FPR0_LS64(\thread)
+	lwc1	$f1,  THREAD_FPR1_LS64(\thread)
+	lwc1	$f2,  THREAD_FPR2_LS64(\thread)
+	lwc1	$f3,  THREAD_FPR3_LS64(\thread)
+	lwc1	$f4,  THREAD_FPR4_LS64(\thread)
+	lwc1	$f5,  THREAD_FPR5_LS64(\thread)
+	lwc1	$f6,  THREAD_FPR6_LS64(\thread)
+	lwc1	$f7,  THREAD_FPR7_LS64(\thread)
+	lwc1	$f8,  THREAD_FPR8_LS64(\thread)
+	lwc1	$f9,  THREAD_FPR9_LS64(\thread)
+	lwc1	$f10, THREAD_FPR10_LS64(\thread)
+	lwc1	$f11, THREAD_FPR11_LS64(\thread)
+	lwc1	$f12, THREAD_FPR12_LS64(\thread)
+	lwc1	$f13, THREAD_FPR13_LS64(\thread)
+	lwc1	$f14, THREAD_FPR14_LS64(\thread)
+	lwc1	$f15, THREAD_FPR15_LS64(\thread)
+	lwc1	$f16, THREAD_FPR16_LS64(\thread)
+	lwc1	$f17, THREAD_FPR17_LS64(\thread)
+	lwc1	$f18, THREAD_FPR18_LS64(\thread)
+	lwc1	$f19, THREAD_FPR19_LS64(\thread)
+	lwc1	$f20, THREAD_FPR20_LS64(\thread)
+	lwc1	$f21, THREAD_FPR21_LS64(\thread)
+	lwc1	$f22, THREAD_FPR22_LS64(\thread)
+	lwc1	$f23, THREAD_FPR23_LS64(\thread)
+	lwc1	$f24, THREAD_FPR24_LS64(\thread)
+	lwc1	$f25, THREAD_FPR25_LS64(\thread)
+	lwc1	$f26, THREAD_FPR26_LS64(\thread)
+	lwc1	$f27, THREAD_FPR27_LS64(\thread)
+	lwc1	$f28, THREAD_FPR28_LS64(\thread)
+	lwc1	$f29, THREAD_FPR29_LS64(\thread)
+	lwc1	$f30, THREAD_FPR30_LS64(\thread)
+	lwc1	$f31, THREAD_FPR31_LS64(\thread)
 	ctc1	\tmp, fcr31
 	.endm
 

arch/mips/include/asm/asmmacro.h

@@ -75,44 +75,44 @@
 
 	.macro	fpu_save_16even thread tmp=t0
 	cfc1	\tmp, fcr31
-	sdc1	$f0,  THREAD_FPR0(\thread)
-	sdc1	$f2,  THREAD_FPR2(\thread)
-	sdc1	$f4,  THREAD_FPR4(\thread)
-	sdc1	$f6,  THREAD_FPR6(\thread)
-	sdc1	$f8,  THREAD_FPR8(\thread)
-	sdc1	$f10, THREAD_FPR10(\thread)
-	sdc1	$f12, THREAD_FPR12(\thread)
-	sdc1	$f14, THREAD_FPR14(\thread)
-	sdc1	$f16, THREAD_FPR16(\thread)
-	sdc1	$f18, THREAD_FPR18(\thread)
-	sdc1	$f20, THREAD_FPR20(\thread)
-	sdc1	$f22, THREAD_FPR22(\thread)
-	sdc1	$f24, THREAD_FPR24(\thread)
-	sdc1	$f26, THREAD_FPR26(\thread)
-	sdc1	$f28, THREAD_FPR28(\thread)
-	sdc1	$f30, THREAD_FPR30(\thread)
+	sdc1	$f0,  THREAD_FPR0_LS64(\thread)
+	sdc1	$f2,  THREAD_FPR2_LS64(\thread)
+	sdc1	$f4,  THREAD_FPR4_LS64(\thread)
+	sdc1	$f6,  THREAD_FPR6_LS64(\thread)
+	sdc1	$f8,  THREAD_FPR8_LS64(\thread)
+	sdc1	$f10, THREAD_FPR10_LS64(\thread)
+	sdc1	$f12, THREAD_FPR12_LS64(\thread)
+	sdc1	$f14, THREAD_FPR14_LS64(\thread)
+	sdc1	$f16, THREAD_FPR16_LS64(\thread)
+	sdc1	$f18, THREAD_FPR18_LS64(\thread)
+	sdc1	$f20, THREAD_FPR20_LS64(\thread)
+	sdc1	$f22, THREAD_FPR22_LS64(\thread)
+	sdc1	$f24, THREAD_FPR24_LS64(\thread)
+	sdc1	$f26, THREAD_FPR26_LS64(\thread)
+	sdc1	$f28, THREAD_FPR28_LS64(\thread)
+	sdc1	$f30, THREAD_FPR30_LS64(\thread)
 	sw	\tmp, THREAD_FCR31(\thread)
 	.endm
 
 	.macro	fpu_save_16odd thread
 	.set	push
 	.set	mips64r2
-	sdc1	$f1,  THREAD_FPR1(\thread)
-	sdc1	$f3,  THREAD_FPR3(\thread)
-	sdc1	$f5,  THREAD_FPR5(\thread)
-	sdc1	$f7,  THREAD_FPR7(\thread)
-	sdc1	$f9,  THREAD_FPR9(\thread)
-	sdc1	$f11, THREAD_FPR11(\thread)
-	sdc1	$f13, THREAD_FPR13(\thread)
-	sdc1	$f15, THREAD_FPR15(\thread)
-	sdc1	$f17, THREAD_FPR17(\thread)
-	sdc1	$f19, THREAD_FPR19(\thread)
-	sdc1	$f21, THREAD_FPR21(\thread)
-	sdc1	$f23, THREAD_FPR23(\thread)
-	sdc1	$f25, THREAD_FPR25(\thread)
-	sdc1	$f27, THREAD_FPR27(\thread)
-	sdc1	$f29, THREAD_FPR29(\thread)
-	sdc1	$f31, THREAD_FPR31(\thread)
+	sdc1	$f1,  THREAD_FPR1_LS64(\thread)
+	sdc1	$f3,  THREAD_FPR3_LS64(\thread)
+	sdc1	$f5,  THREAD_FPR5_LS64(\thread)
+	sdc1	$f7,  THREAD_FPR7_LS64(\thread)
+	sdc1	$f9,  THREAD_FPR9_LS64(\thread)
+	sdc1	$f11, THREAD_FPR11_LS64(\thread)
+	sdc1	$f13, THREAD_FPR13_LS64(\thread)
+	sdc1	$f15, THREAD_FPR15_LS64(\thread)
+	sdc1	$f17, THREAD_FPR17_LS64(\thread)
+	sdc1	$f19, THREAD_FPR19_LS64(\thread)
+	sdc1	$f21, THREAD_FPR21_LS64(\thread)
+	sdc1	$f23, THREAD_FPR23_LS64(\thread)
+	sdc1	$f25, THREAD_FPR25_LS64(\thread)
+	sdc1	$f27, THREAD_FPR27_LS64(\thread)
+	sdc1	$f29, THREAD_FPR29_LS64(\thread)
+	sdc1	$f31, THREAD_FPR31_LS64(\thread)
 	.set	pop
 	.endm
 
@@ -128,44 +128,44 @@
 
 	.macro	fpu_restore_16even thread tmp=t0
 	lw	\tmp, THREAD_FCR31(\thread)
-	ldc1	$f0,  THREAD_FPR0(\thread)
-	ldc1	$f2,  THREAD_FPR2(\thread)
-	ldc1	$f4,  THREAD_FPR4(\thread)
-	ldc1	$f6,  THREAD_FPR6(\thread)
-	ldc1	$f8,  THREAD_FPR8(\thread)
-	ldc1	$f10, THREAD_FPR10(\thread)
-	ldc1	$f12, THREAD_FPR12(\thread)
-	ldc1	$f14, THREAD_FPR14(\thread)
-	ldc1	$f16, THREAD_FPR16(\thread)
-	ldc1	$f18, THREAD_FPR18(\thread)
-	ldc1	$f20, THREAD_FPR20(\thread)
-	ldc1	$f22, THREAD_FPR22(\thread)
-	ldc1	$f24, THREAD_FPR24(\thread)
-	ldc1	$f26, THREAD_FPR26(\thread)
-	ldc1	$f28, THREAD_FPR28(\thread)
-	ldc1	$f30, THREAD_FPR30(\thread)
+	ldc1	$f0,  THREAD_FPR0_LS64(\thread)
+	ldc1	$f2,  THREAD_FPR2_LS64(\thread)
+	ldc1	$f4,  THREAD_FPR4_LS64(\thread)
+	ldc1	$f6,  THREAD_FPR6_LS64(\thread)
+	ldc1	$f8,  THREAD_FPR8_LS64(\thread)
+	ldc1	$f10, THREAD_FPR10_LS64(\thread)
+	ldc1	$f12, THREAD_FPR12_LS64(\thread)
+	ldc1	$f14, THREAD_FPR14_LS64(\thread)
+	ldc1	$f16, THREAD_FPR16_LS64(\thread)
+	ldc1	$f18, THREAD_FPR18_LS64(\thread)
+	ldc1	$f20, THREAD_FPR20_LS64(\thread)
+	ldc1	$f22, THREAD_FPR22_LS64(\thread)
+	ldc1	$f24, THREAD_FPR24_LS64(\thread)
+	ldc1	$f26, THREAD_FPR26_LS64(\thread)
+	ldc1	$f28, THREAD_FPR28_LS64(\thread)
+	ldc1	$f30, THREAD_FPR30_LS64(\thread)
 	ctc1	\tmp, fcr31
 	.endm
 
 	.macro	fpu_restore_16odd thread
 	.set	push
 	.set	mips64r2
-	ldc1	$f1,  THREAD_FPR1(\thread)
-	ldc1	$f3,  THREAD_FPR3(\thread)
-	ldc1	$f5,  THREAD_FPR5(\thread)
-	ldc1	$f7,  THREAD_FPR7(\thread)
-	ldc1	$f9,  THREAD_FPR9(\thread)
-	ldc1	$f11, THREAD_FPR11(\thread)
-	ldc1	$f13, THREAD_FPR13(\thread)
-	ldc1	$f15, THREAD_FPR15(\thread)
-	ldc1	$f17, THREAD_FPR17(\thread)
-	ldc1	$f19, THREAD_FPR19(\thread)
-	ldc1	$f21, THREAD_FPR21(\thread)
-	ldc1	$f23, THREAD_FPR23(\thread)
-	ldc1	$f25, THREAD_FPR25(\thread)
-	ldc1	$f27, THREAD_FPR27(\thread)
-	ldc1	$f29, THREAD_FPR29(\thread)
-	ldc1	$f31, THREAD_FPR31(\thread)
+	ldc1	$f1,  THREAD_FPR1_LS64(\thread)
+	ldc1	$f3,  THREAD_FPR3_LS64(\thread)
+	ldc1	$f5,  THREAD_FPR5_LS64(\thread)
+	ldc1	$f7,  THREAD_FPR7_LS64(\thread)
+	ldc1	$f9,  THREAD_FPR9_LS64(\thread)
+	ldc1	$f11, THREAD_FPR11_LS64(\thread)
+	ldc1	$f13, THREAD_FPR13_LS64(\thread)
+	ldc1	$f15, THREAD_FPR15_LS64(\thread)
+	ldc1	$f17, THREAD_FPR17_LS64(\thread)
+	ldc1	$f19, THREAD_FPR19_LS64(\thread)
+	ldc1	$f21, THREAD_FPR21_LS64(\thread)
+	ldc1	$f23, THREAD_FPR23_LS64(\thread)
+	ldc1	$f25, THREAD_FPR25_LS64(\thread)
+	ldc1	$f27, THREAD_FPR27_LS64(\thread)
+	ldc1	$f29, THREAD_FPR29_LS64(\thread)
+	ldc1	$f31, THREAD_FPR31_LS64(\thread)
 	.set	pop
 	.endm
 
@@ -180,6 +180,17 @@
 	fpu_restore_16even \thread \tmp
 	.endm
 
+#ifdef CONFIG_CPU_MIPSR2
+	.macro	_EXT	rd, rs, p, s
+	ext	\rd, \rs, \p, \s
+	.endm
+#else /* !CONFIG_CPU_MIPSR2 */
+	.macro	_EXT	rd, rs, p, s
+	srl	\rd, \rs, \p
+	andi	\rd, \rd, (1 << \s) - 1
+	.endm
+#endif /* !CONFIG_CPU_MIPSR2 */
+
 /*
  * Temporary until all gas have MT ASE support
  */
@@ -207,4 +218,195 @@
 	 .word	0x41800000 | (\rt << 16) | (\rd << 11) | (\u << 5) | (\sel)
 	.endm
 
+#ifdef TOOLCHAIN_SUPPORTS_MSA
+	.macro	ld_d	wd, off, base
+	.set	push
+	.set	mips32r2
+	.set	msa
+	ld.d	$w\wd, \off(\base)
+	.set	pop
+	.endm
+
+	.macro	st_d	wd, off, base
+	.set	push
+	.set	mips32r2
+	.set	msa
+	st.d	$w\wd, \off(\base)
+	.set	pop
+	.endm
+
+	.macro	copy_u_w	rd, ws, n
+	.set	push
+	.set	mips32r2
+	.set	msa
+	copy_u.w \rd, $w\ws[\n]
+	.set	pop
+	.endm
+
+	.macro	copy_u_d	rd, ws, n
+	.set	push
+	.set	mips64r2
+	.set	msa
+	copy_u.d \rd, $w\ws[\n]
+	.set	pop
+	.endm
+
+	.macro	insert_w	wd, n, rs
+	.set	push
+	.set	mips32r2
+	.set	msa
+	insert.w $w\wd[\n], \rs
+	.set	pop
+	.endm
+
+	.macro	insert_d	wd, n, rs
+	.set	push
+	.set	mips64r2
+	.set	msa
+	insert.d $w\wd[\n], \rs
+	.set	pop
+	.endm
+#else
+	/*
+	 * Temporary until all toolchains in use include MSA support.
+	 */
+	.macro	cfcmsa	rd, cs
+	.set	push
+	.set	noat
+	.word	0x787e0059 | (\cs << 11)
+	move	\rd, $1
+	.set	pop
+	.endm
+
+	.macro	ctcmsa	cd, rs
+	.set	push
+	.set	noat
+	move	$1, \rs
+	.word	0x783e0819 | (\cd << 6)
+	.set	pop
+	.endm
+
+	.macro	ld_d	wd, off, base
+	.set	push
+	.set	noat
+	add	$1, \base, \off
+	.word	0x78000823 | (\wd << 6)
+	.set	pop
+	.endm
+
+	.macro	st_d	wd, off, base
+	.set	push
+	.set	noat
+	add	$1, \base, \off
+	.word	0x78000827 | (\wd << 6)
+	.set	pop
+	.endm
+
+	.macro	copy_u_w	rd, ws, n
+	.set	push
+	.set	noat
+	.word	0x78f00059 | (\n << 16) | (\ws << 11)
+	/* move triggers an assembler bug... */
+	or	\rd, $1, zero
+	.set	pop
+	.endm
+
+	.macro	copy_u_d	rd, ws, n
+	.set	push
+	.set	noat
+	.word	0x78f80059 | (\n << 16) | (\ws << 11)
+	/* move triggers an assembler bug... */
+	or	\rd, $1, zero
+	.set	pop
+	.endm
+
+	.macro	insert_w	wd, n, rs
+	.set	push
+	.set	noat
+	/* move triggers an assembler bug... */
+	or	$1, \rs, zero
+	.word	0x79300819 | (\n << 16) | (\wd << 6)
+	.set	pop
+	.endm
+
+	.macro	insert_d	wd, n, rs
+	.set	push
+	.set	noat
+	/* move triggers an assembler bug... */
+	or	$1, \rs, zero
+	.word	0x79380819 | (\n << 16) | (\wd << 6)
+	.set	pop
+	.endm
+#endif
+
+	.macro	msa_save_all	thread
+	st_d	0, THREAD_FPR0, \thread
+	st_d	1, THREAD_FPR1, \thread
+	st_d	2, THREAD_FPR2, \thread
+	st_d	3, THREAD_FPR3, \thread
+	st_d	4, THREAD_FPR4, \thread
+	st_d	5, THREAD_FPR5, \thread
+	st_d	6, THREAD_FPR6, \thread
+	st_d	7, THREAD_FPR7, \thread
+	st_d	8, THREAD_FPR8, \thread
+	st_d	9, THREAD_FPR9, \thread
+	st_d	10, THREAD_FPR10, \thread
+	st_d	11, THREAD_FPR11, \thread
+	st_d	12, THREAD_FPR12, \thread
+	st_d	13, THREAD_FPR13, \thread
+	st_d	14, THREAD_FPR14, \thread
+	st_d	15, THREAD_FPR15, \thread
+	st_d	16, THREAD_FPR16, \thread
+	st_d	17, THREAD_FPR17, \thread
+	st_d	18, THREAD_FPR18, \thread
+	st_d	19, THREAD_FPR19, \thread
+	st_d	20, THREAD_FPR20, \thread
+	st_d	21, THREAD_FPR21, \thread
+	st_d	22, THREAD_FPR22, \thread
+	st_d	23, THREAD_FPR23, \thread
+	st_d	24, THREAD_FPR24, \thread
+	st_d	25, THREAD_FPR25, \thread
+	st_d	26, THREAD_FPR26, \thread
+	st_d	27, THREAD_FPR27, \thread
+	st_d	28, THREAD_FPR28, \thread
+	st_d	29, THREAD_FPR29, \thread
+	st_d	30, THREAD_FPR30, \thread
+	st_d	31, THREAD_FPR31, \thread
+	.endm
+
+	.macro	msa_restore_all	thread
+	ld_d	0, THREAD_FPR0, \thread
+	ld_d	1, THREAD_FPR1, \thread
+	ld_d	2, THREAD_FPR2, \thread
+	ld_d	3, THREAD_FPR3, \thread
+	ld_d	4, THREAD_FPR4, \thread
+	ld_d	5, THREAD_FPR5, \thread
+	ld_d	6, THREAD_FPR6, \thread
+	ld_d	7, THREAD_FPR7, \thread
+	ld_d	8, THREAD_FPR8, \thread
+	ld_d	9, THREAD_FPR9, \thread
+	ld_d	10, THREAD_FPR10, \thread
+	ld_d	11, THREAD_FPR11, \thread
+	ld_d	12, THREAD_FPR12, \thread
+	ld_d	13, THREAD_FPR13, \thread
+	ld_d	14, THREAD_FPR14, \thread
+	ld_d	15, THREAD_FPR15, \thread
+	ld_d	16, THREAD_FPR16, \thread
+	ld_d	17, THREAD_FPR17, \thread
+	ld_d	18, THREAD_FPR18, \thread
+	ld_d	19, THREAD_FPR19, \thread
+	ld_d	20, THREAD_FPR20, \thread
+	ld_d	21, THREAD_FPR21, \thread
+	ld_d	22, THREAD_FPR22, \thread
+	ld_d	23, THREAD_FPR23, \thread
+	ld_d	24, THREAD_FPR24, \thread
+	ld_d	25, THREAD_FPR25, \thread
+	ld_d	26, THREAD_FPR26, \thread
+	ld_d	27, THREAD_FPR27, \thread
+	ld_d	28, THREAD_FPR28, \thread
+	ld_d	29, THREAD_FPR29, \thread
+	ld_d	30, THREAD_FPR30, \thread
+	ld_d	31, THREAD_FPR31, \thread
+	.endm
+
 #endif /* _ASM_ASMMACRO_H */

arch/mips/include/asm/atomic.h

@@ -53,7 +53,7 @@ static __inline__ void atomic_add(int i, atomic_t * v)
 		int temp;
 
 		__asm__ __volatile__(
-		"	.set	mips3					\n"
+		"	.set	arch=r4000				\n"
 		"1:	ll	%0, %1		# atomic_add		\n"
 		"	addu	%0, %2					\n"
 		"	sc	%0, %1					\n"
@@ -66,7 +66,7 @@ static __inline__ void atomic_add(int i, atomic_t * v)
 
 		do {
 			__asm__ __volatile__(
-			"	.set	mips3				\n"
+			"	.set	arch=r4000			\n"
 			"	ll	%0, %1		# atomic_add	\n"
 			"	addu	%0, %2				\n"
 			"	sc	%0, %1				\n"
@@ -96,7 +96,7 @@ static __inline__ void atomic_sub(int i, atomic_t * v)
 		int temp;
 
 		__asm__ __volatile__(
-		"	.set	mips3					\n"
+		"	.set	arch=r4000				\n"
 		"1:	ll	%0, %1		# atomic_sub		\n"
 		"	subu	%0, %2					\n"
 		"	sc	%0, %1					\n"
@@ -109,7 +109,7 @@ static __inline__ void atomic_sub(int i, atomic_t * v)
 
 		do {
 			__asm__ __volatile__(
-			"	.set	mips3				\n"
+			"	.set	arch=r4000			\n"
 			"	ll	%0, %1		# atomic_sub	\n"
 			"	subu	%0, %2				\n"
 			"	sc	%0, %1				\n"
@@ -139,7 +139,7 @@ static __inline__ int atomic_add_return(int i, atomic_t * v)
 		int temp;
 
 		__asm__ __volatile__(
-		"	.set	mips3					\n"
+		"	.set	arch=r4000				\n"
 		"1:	ll	%1, %2		# atomic_add_return	\n"
 		"	addu	%0, %1, %3				\n"
 		"	sc	%0, %2					\n"
@@ -153,7 +153,7 @@ static __inline__ int atomic_add_return(int i, atomic_t * v)
 
 		do {
 			__asm__ __volatile__(
-			"	.set	mips3				\n"
+			"	.set	arch=r4000			\n"
 			"	ll	%1, %2	# atomic_add_return	\n"
 			"	addu	%0, %1, %3			\n"
 			"	sc	%0, %2				\n"
@@ -188,7 +188,7 @@ static __inline__ int atomic_sub_return(int i, atomic_t * v)
 		int temp;
 
 		__asm__ __volatile__(
-		"	.set	mips3					\n"
+		"	.set	arch=r4000				\n"
 		"1:	ll	%1, %2		# atomic_sub_return	\n"
 		"	subu	%0, %1, %3				\n"
 		"	sc	%0, %2					\n"
@@ -205,7 +205,7 @@ static __inline__ int atomic_sub_return(int i, atomic_t * v)
 
 		do {
 			__asm__ __volatile__(
-			"	.set	mips3				\n"
+			"	.set	arch=r4000			\n"
 			"	ll	%1, %2	# atomic_sub_return	\n"
 			"	subu	%0, %1, %3			\n"
 			"	sc	%0, %2				\n"
@@ -248,7 +248,7 @@ static __inline__ int atomic_sub_if_positive(int i, atomic_t * v)
 		int temp;
 
 		__asm__ __volatile__(
-		"	.set	mips3					\n"
+		"	.set	arch=r4000				\n"
 		"1:	ll	%1, %2		# atomic_sub_if_positive\n"
 		"	subu	%0, %1, %3				\n"
 		"	bltz	%0, 1f					\n"
@@ -266,7 +266,7 @@ static __inline__ int atomic_sub_if_positive(int i, atomic_t * v)
 		int temp;
 
 		__asm__ __volatile__(
-		"	.set	mips3					\n"
+		"	.set	arch=r4000				\n"
 		"1:	ll	%1, %2		# atomic_sub_if_positive\n"
 		"	subu	%0, %1, %3				\n"
 		"	bltz	%0, 1f					\n"
@@ -420,7 +420,7 @@ static __inline__ void atomic64_add(long i, atomic64_t * v)
 		long temp;
 
 		__asm__ __volatile__(
-		"	.set	mips3					\n"
+		"	.set	arch=r4000				\n"
 		"1:	lld	%0, %1		# atomic64_add		\n"
 		"	daddu	%0, %2					\n"
 		"	scd	%0, %1					\n"
@@ -433,7 +433,7 @@ static __inline__ void atomic64_add(long i, atomic64_t * v)
 
 		do {
 			__asm__ __volatile__(
-			"	.set	mips3				\n"
+			"	.set	arch=r4000			\n"
 			"	lld	%0, %1		# atomic64_add	\n"
 			"	daddu	%0, %2				\n"
 			"	scd	%0, %1				\n"
@@ -463,7 +463,7 @@ static __inline__ void atomic64_sub(long i, atomic64_t * v)
 		long temp;
 
 		__asm__ __volatile__(
-		"	.set	mips3					\n"
+		"	.set	arch=r4000				\n"
 		"1:	lld	%0, %1		# atomic64_sub		\n"
 		"	dsubu	%0, %2					\n"
 		"	scd	%0, %1					\n"
@@ -476,7 +476,7 @@ static __inline__ void atomic64_sub(long i, atomic64_t * v)
 
 		do {
 			__asm__ __volatile__(
-			"	.set	mips3				\n"
+			"	.set	arch=r4000			\n"
 			"	lld	%0, %1		# atomic64_sub	\n"
 			"	dsubu	%0, %2				\n"
 			"	scd	%0, %1				\n"
@@ -506,7 +506,7 @@ static __inline__ long atomic64_add_return(long i, atomic64_t * v)
 		long temp;
 
 		__asm__ __volatile__(
-		"	.set	mips3					\n"
+		"	.set	arch=r4000				\n"
 		"1:	lld	%1, %2		# atomic64_add_return	\n"
 		"	daddu	%0, %1, %3				\n"
 		"	scd	%0, %2					\n"
@@ -520,7 +520,7 @@ static __inline__ long atomic64_add_return(long i, atomic64_t * v)
 
 		do {
 			__asm__ __volatile__(
-			"	.set	mips3				\n"
+			"	.set	arch=r4000			\n"
 			"	lld	%1, %2	# atomic64_add_return	\n"
 			"	daddu	%0, %1, %3			\n"
 			"	scd	%0, %2				\n"
@@ -556,7 +556,7 @@ static __inline__ long atomic64_sub_return(long i, atomic64_t * v)
 		long temp;
 
 		__asm__ __volatile__(
-		"	.set	mips3					\n"
+		"	.set	arch=r4000				\n"
 		"1:	lld	%1, %2		# atomic64_sub_return	\n"
 		"	dsubu	%0, %1, %3				\n"
 		"	scd	%0, %2					\n"
@@ -571,7 +571,7 @@ static __inline__ long atomic64_sub_return(long i, atomic64_t * v)
 
 		do {
 			__asm__ __volatile__(
-			"	.set	mips3				\n"
+			"	.set	arch=r4000			\n"
 			"	lld	%1, %2	# atomic64_sub_return	\n"
 			"	dsubu	%0, %1, %3			\n"
 			"	scd	%0, %2				\n"
@@ -615,7 +615,7 @@ static __inline__ long atomic64_sub_if_positive(long i, atomic64_t * v)
 		long temp;
 
 		__asm__ __volatile__(
-		"	.set	mips3					\n"
+		"	.set	arch=r4000				\n"
 		"1:	lld	%1, %2		# atomic64_sub_if_positive\n"
 		"	dsubu	%0, %1, %3				\n"
 		"	bltz	%0, 1f					\n"
@@ -633,7 +633,7 @@ static __inline__ long atomic64_sub_if_positive(long i, atomic64_t * v)
 		long temp;
 
 		__asm__ __volatile__(
-		"	.set	mips3					\n"
+		"	.set	arch=r4000				\n"
 		"1:	lld	%1, %2		# atomic64_sub_if_positive\n"
 		"	dsubu	%0, %1, %3				\n"
 		"	bltz	%0, 1f					\n"

arch/mips/include/asm/bitops.h

@@ -79,7 +79,7 @@ static inline void set_bit(unsigned long nr, volatile unsigned long *addr)
 
 	if (kernel_uses_llsc && R10000_LLSC_WAR) {
 		__asm__ __volatile__(
-		"	.set	mips3					\n"
+		"	.set	arch=r4000				\n"
 		"1:	" __LL "%0, %1			# set_bit	\n"
 		"	or	%0, %2					\n"
 		"	" __SC	"%0, %1					\n"
@@ -101,7 +101,7 @@ static inline void set_bit(unsigned long nr, volatile unsigned long *addr)
 	} else if (kernel_uses_llsc) {
 		do {
 			__asm__ __volatile__(
-			"	.set	mips3				\n"
+			"	.set	arch=r4000			\n"
 			"	" __LL "%0, %1		# set_bit	\n"
 			"	or	%0, %2				\n"
 			"	" __SC	"%0, %1				\n"
@@ -131,7 +131,7 @@ static inline void clear_bit(unsigned long nr, volatile unsigned long *addr)
 
 	if (kernel_uses_llsc && R10000_LLSC_WAR) {
 		__asm__ __volatile__(
-		"	.set	mips3					\n"
+		"	.set	arch=r4000				\n"
 		"1:	" __LL "%0, %1			# clear_bit	\n"
 		"	and	%0, %2					\n"
 		"	" __SC "%0, %1					\n"
@@ -153,7 +153,7 @@ static inline void clear_bit(unsigned long nr, volatile unsigned long *addr)
 	} else if (kernel_uses_llsc) {
 		do {
 			__asm__ __volatile__(
-			"	.set	mips3				\n"
+			"	.set	arch=r4000			\n"
 			"	" __LL "%0, %1		# clear_bit	\n"
 			"	and	%0, %2				\n"
 			"	" __SC "%0, %1				\n"
@@ -197,7 +197,7 @@ static inline void change_bit(unsigned long nr, volatile unsigned long *addr)
 		unsigned long temp;
 
 		__asm__ __volatile__(
-		"	.set	mips3				\n"
+		"	.set	arch=r4000			\n"
 		"1:	" __LL "%0, %1		# change_bit	\n"
 		"	xor	%0, %2				\n"
 		"	" __SC	"%0, %1				\n"
@@ -211,7 +211,7 @@ static inline void change_bit(unsigned long nr, volatile unsigned long *addr)
 
 		do {
 			__asm__ __volatile__(
-			"	.set	mips3				\n"
+			"	.set	arch=r4000			\n"
 			"	" __LL "%0, %1		# change_bit	\n"
 			"	xor	%0, %2				\n"
 			"	" __SC	"%0, %1				\n"
@@ -244,7 +244,7 @@ static inline int test_and_set_bit(unsigned long nr,
 		unsigned long temp;
 
 		__asm__ __volatile__(
-		"	.set	mips3					\n"
+		"	.set	arch=r4000				\n"
 		"1:	" __LL "%0, %1		# test_and_set_bit	\n"
 		"	or	%2, %0, %3				\n"
 		"	" __SC	"%2, %1					\n"
@@ -260,7 +260,7 @@ static inline int test_and_set_bit(unsigned long nr,
 
 		do {
 			__asm__ __volatile__(
-			"	.set	mips3				\n"
+			"	.set	arch=r4000			\n"
 			"	" __LL "%0, %1	# test_and_set_bit	\n"
 			"	or	%2, %0, %3			\n"
 			"	" __SC	"%2, %1				\n"
@@ -298,7 +298,7 @@ static inline int test_and_set_bit_lock(unsigned long nr,
 		unsigned long temp;
 
 		__asm__ __volatile__(
-		"	.set	mips3					\n"
+		"	.set	arch=r4000				\n"
 		"1:	" __LL "%0, %1		# test_and_set_bit	\n"
 		"	or	%2, %0, %3				\n"
 		"	" __SC	"%2, %1					\n"
@@ -314,7 +314,7 @@ static inline int test_and_set_bit_lock(unsigned long nr,
 
 		do {
 			__asm__ __volatile__(
-			"	.set	mips3				\n"
+			"	.set	arch=r4000			\n"
 			"	" __LL "%0, %1	# test_and_set_bit	\n"
 			"	or	%2, %0, %3			\n"
 			"	" __SC	"%2, %1				\n"
@@ -353,7 +353,7 @@ static inline int test_and_clear_bit(unsigned long nr,
 		unsigned long temp;
 
 		__asm__ __volatile__(
-		"	.set	mips3					\n"
+		"	.set	arch=r4000				\n"
 		"1:	" __LL	"%0, %1		# test_and_clear_bit	\n"
 		"	or	%2, %0, %3				\n"
 		"	xor	%2, %3					\n"
@@ -386,7 +386,7 @@ static inline int test_and_clear_bit(unsigned long nr,
 
 		do {
 			__asm__ __volatile__(
-			"	.set	mips3				\n"
+			"	.set	arch=r4000			\n"
 			"	" __LL	"%0, %1 # test_and_clear_bit	\n"
 			"	or	%2, %0, %3			\n"
 			"	xor	%2, %3				\n"
@@ -427,7 +427,7 @@ static inline int test_and_change_bit(unsigned long nr,
 		unsigned long temp;
 
 		__asm__ __volatile__(
-		"	.set	mips3					\n"
+		"	.set	arch=r4000				\n"
 		"1:	" __LL	"%0, %1		# test_and_change_bit	\n"
 		"	xor	%2, %0, %3				\n"
 		"	" __SC	"%2, %1					\n"
@@ -443,7 +443,7 @@ static inline int test_and_change_bit(unsigned long nr,
 
 		do {
 			__asm__ __volatile__(
-			"	.set	mips3				\n"
+			"	.set	arch=r4000			\n"
 			"	" __LL	"%0, %1 # test_and_change_bit	\n"
 			"	xor	%2, %0, %3			\n"
 			"	" __SC	"\t%2, %1			\n"

arch/mips/include/asm/bootinfo.h

@@ -61,15 +61,21 @@
 /*
  * Valid machtype for Loongson family
  */
-#define MACH_LOONGSON_UNKNOWN  0
-#define MACH_LEMOTE_FL2E       1
-#define MACH_LEMOTE_FL2F       2
-#define MACH_LEMOTE_ML2F7      3
-#define MACH_LEMOTE_YL2F89     4
-#define MACH_DEXXON_GDIUM2F10  5
-#define MACH_LEMOTE_NAS	       6
-#define MACH_LEMOTE_LL2F       7
-#define MACH_LOONGSON_END      8
+enum loongson_machine_type {
+	MACH_LOONGSON_UNKNOWN,
+	MACH_LEMOTE_FL2E,
+	MACH_LEMOTE_FL2F,
+	MACH_LEMOTE_ML2F7,
+	MACH_LEMOTE_YL2F89,
+	MACH_DEXXON_GDIUM2F10,
+	MACH_LEMOTE_NAS,
+	MACH_LEMOTE_LL2F,
+	MACH_LEMOTE_A1004,
+	MACH_LEMOTE_A1101,
+	MACH_LEMOTE_A1201,
+	MACH_LEMOTE_A1205,
+	MACH_LOONGSON_END
+};
 
 /*
  * Valid machtype for group INGENIC
@@ -112,6 +118,8 @@ extern void prom_free_prom_memory(void);
 extern void free_init_pages(const char *what,
 			    unsigned long begin, unsigned long end);
 
+extern void (*free_init_pages_eva)(void *begin, void *end);
+
 /*
  * Initial kernel command line, usually setup by prom_init()
  */

arch/mips/include/asm/checksum.h

@@ -7,6 +7,7 @@
  * Copyright (C) 1999 Silicon Graphics, Inc.
  * Copyright (C) 2001 Thiemo Seufer.
  * Copyright (C) 2002 Maciej W. Rozycki
+ * Copyright (C) 2014 Imagination Technologies Ltd.
  */
 #ifndef _ASM_CHECKSUM_H
 #define _ASM_CHECKSUM_H
@@ -29,9 +30,13 @@
  */
 __wsum csum_partial(const void *buff, int len, __wsum sum);
 
-__wsum __csum_partial_copy_user(const void *src, void *dst,
-				int len, __wsum sum, int *err_ptr);
+__wsum __csum_partial_copy_kernel(const void *src, void *dst,
+				  int len, __wsum sum, int *err_ptr);
 
+__wsum __csum_partial_copy_from_user(const void *src, void *dst,
+				     int len, __wsum sum, int *err_ptr);
+__wsum __csum_partial_copy_to_user(const void *src, void *dst,
+				   int len, __wsum sum, int *err_ptr);
 /*
  * this is a new version of the above that records errors it finds in *errp,
  * but continues and zeros the rest of the buffer.
@@ -41,8 +46,26 @@ __wsum csum_partial_copy_from_user(const void __user *src, void *dst, int len,
 				   __wsum sum, int *err_ptr)
 {
 	might_fault();
-	return __csum_partial_copy_user((__force void *)src, dst,
-					len, sum, err_ptr);
+	if (segment_eq(get_fs(), get_ds()))
+		return __csum_partial_copy_kernel((__force void *)src, dst,
+						  len, sum, err_ptr);
+	else
+		return __csum_partial_copy_from_user((__force void *)src, dst,
+						     len, sum, err_ptr);
+}
+
+#define _HAVE_ARCH_COPY_AND_CSUM_FROM_USER
+static inline
+__wsum csum_and_copy_from_user(const void __user *src, void *dst,
+			       int len, __wsum sum, int *err_ptr)
+{
+	if (access_ok(VERIFY_READ, src, len))
+		return csum_partial_copy_from_user(src, dst, len, sum,
+						   err_ptr);
+	if (len)
+		*err_ptr = -EFAULT;
+
+	return sum;
 }
 
 /*
@@ -54,9 +77,16 @@ __wsum csum_and_copy_to_user(const void *src, void __user *dst, int len,
 			     __wsum sum, int *err_ptr)
 {
 	might_fault();
-	if (access_ok(VERIFY_WRITE, dst, len))
-		return __csum_partial_copy_user(src, (__force void *)dst,
-						len, sum, err_ptr);
+	if (access_ok(VERIFY_WRITE, dst, len)) {
+		if (segment_eq(get_fs(), get_ds()))
+			return __csum_partial_copy_kernel(src,
+							  (__force void *)dst,
+							  len, sum, err_ptr);
+		else
+			return __csum_partial_copy_to_user(src,
+							   (__force void *)dst,
+							   len, sum, err_ptr);
+	}
 	if (len)
 		*err_ptr = -EFAULT;
 

arch/mips/include/asm/cmpxchg.h

@@ -22,11 +22,11 @@ static inline unsigned long __xchg_u32(volatile int * m, unsigned int val)
 		unsigned long dummy;
 
 		__asm__ __volatile__(
-		"	.set	mips3					\n"
+		"	.set	arch=r4000				\n"
 		"1:	ll	%0, %3			# xchg_u32	\n"
 		"	.set	mips0					\n"
 		"	move	%2, %z4					\n"
-		"	.set	mips3					\n"
+		"	.set	arch=r4000				\n"
 		"	sc	%2, %1					\n"
 		"	beqzl	%2, 1b					\n"
 		"	.set	mips0					\n"
@@ -38,11 +38,11 @@ static inline unsigned long __xchg_u32(volatile int * m, unsigned int val)
 
 		do {
 			__asm__ __volatile__(
-			"	.set	mips3				\n"
+			"	.set	arch=r4000			\n"
 			"	ll	%0, %3		# xchg_u32	\n"
 			"	.set	mips0				\n"
 			"	move	%2, %z4				\n"
-			"	.set	mips3				\n"
+			"	.set	arch=r4000			\n"
 			"	sc	%2, %1				\n"
 			"	.set	mips0				\n"
 			: "=&r" (retval), "=m" (*m), "=&r" (dummy)
@@ -74,7 +74,7 @@ static inline __u64 __xchg_u64(volatile __u64 * m, __u64 val)
 		unsigned long dummy;
 
 		__asm__ __volatile__(
-		"	.set	mips3					\n"
+		"	.set	arch=r4000				\n"
 		"1:	lld	%0, %3			# xchg_u64	\n"
 		"	move	%2, %z4					\n"
 		"	scd	%2, %1					\n"
@@ -88,7 +88,7 @@ static inline __u64 __xchg_u64(volatile __u64 * m, __u64 val)
 
 		do {
 			__asm__ __volatile__(
-			"	.set	mips3				\n"
+			"	.set	arch=r4000			\n"
 			"	lld	%0, %3		# xchg_u64	\n"
 			"	move	%2, %z4				\n"
 			"	scd	%2, %1				\n"
@@ -145,12 +145,12 @@ static inline unsigned long __xchg(unsigned long x, volatile void * ptr, int siz
 		__asm__ __volatile__(					\
 		"	.set	push				\n"	\
 		"	.set	noat				\n"	\
-		"	.set	mips3				\n"	\
+		"	.set	arch=r4000			\n"	\
 		"1:	" ld "	%0, %2		# __cmpxchg_asm \n"	\
 		"	bne	%0, %z3, 2f			\n"	\
 		"	.set	mips0				\n"	\
 		"	move	$1, %z4				\n"	\
-		"	.set	mips3				\n"	\
+		"	.set	arch=r4000			\n"	\
 		"	" st "	$1, %1				\n"	\
 		"	beqzl	$1, 1b				\n"	\
 		"2:						\n"	\
@@ -162,12 +162,12 @@ static inline unsigned long __xchg(unsigned long x, volatile void * ptr, int siz
 		__asm__ __volatile__(					\
 		"	.set	push				\n"	\
 		"	.set	noat				\n"	\
-		"	.set	mips3				\n"	\
+		"	.set	arch=r4000			\n"	\
 		"1:	" ld "	%0, %2		# __cmpxchg_asm \n"	\
 		"	bne	%0, %z3, 2f			\n"	\
 		"	.set	mips0				\n"	\
 		"	move	$1, %z4				\n"	\
-		"	.set	mips3				\n"	\
+		"	.set	arch=r4000			\n"	\
 		"	" st "	$1, %1				\n"	\
 		"	beqz	$1, 1b				\n"	\
 		"	.set	pop				\n"	\

arch/mips/include/asm/cpu-features.h

@@ -26,7 +26,9 @@
 #ifndef cpu_has_segments
 #define cpu_has_segments	(cpu_data[0].options & MIPS_CPU_SEGMENTS)
 #endif
-
+#ifndef cpu_has_eva
+#define cpu_has_eva		(cpu_data[0].options & MIPS_CPU_EVA)
+#endif
 
 /*
  * For the moment we don't consider R6000 and R8000 so we can assume that
@@ -299,4 +301,10 @@
 #define cpu_has_vz		(cpu_data[0].ases & MIPS_ASE_VZ)
 #endif
 
+#if defined(CONFIG_CPU_HAS_MSA) && !defined(cpu_has_msa)
+# define cpu_has_msa		(cpu_data[0].ases & MIPS_ASE_MSA)
+#elif !defined(cpu_has_msa)
+# define cpu_has_msa		0
+#endif
+
 #endif /* __ASM_CPU_FEATURES_H */

arch/mips/include/asm/cpu-info.h

@@ -49,6 +49,7 @@ struct cpuinfo_mips {
 	unsigned long		ases;
 	unsigned int		processor_id;
 	unsigned int		fpu_id;
+	unsigned int		msa_id;
 	unsigned int		cputype;
 	int			isa_level;
 	int			tlbsize;
@@ -95,4 +96,31 @@ extern void cpu_report(void);
 extern const char *__cpu_name[];
 #define cpu_name_string()	__cpu_name[smp_processor_id()]
 
+struct seq_file;
+struct notifier_block;
+
+extern int register_proc_cpuinfo_notifier(struct notifier_block *nb);
+extern int proc_cpuinfo_notifier_call_chain(unsigned long val, void *v);
+
+#define proc_cpuinfo_notifier(fn, pri)					\
+({									\
+	static struct notifier_block fn##_nb = {			\
+		.notifier_call = fn,					\
+		.priority = pri						\
+	};								\
+									\
+	register_proc_cpuinfo_notifier(&fn##_nb);			\
+})
+
+struct proc_cpuinfo_notifier_args {
+	struct seq_file *m;
+	unsigned long n;
+};
+
+#if defined(CONFIG_MIPS_MT_SMP) || defined(CONFIG_MIPS_MT_SMTC)
+# define cpu_vpe_id(cpuinfo)	((cpuinfo)->vpe_id)
+#else
+# define cpu_vpe_id(cpuinfo)	0
+#endif
+
 #endif /* __ASM_CPU_INFO_H */

arch/mips/include/asm/cpu-type.h

@@ -20,6 +20,10 @@ static inline int __pure __get_cpu_type(const int cpu_type)
 	case CPU_LOONGSON2:
 #endif
 
+#ifdef CONFIG_SYS_HAS_CPU_LOONGSON3
+	case CPU_LOONGSON3:
+#endif
+
 #ifdef CONFIG_SYS_HAS_CPU_LOONGSON1B
 	case CPU_LOONGSON1:
 #endif
@@ -46,6 +50,8 @@ static inline int __pure __get_cpu_type(const int cpu_type)
 	case CPU_M14KEC:
 	case CPU_INTERAPTIV:
 	case CPU_PROAPTIV:
+	case CPU_P5600:
+	case CPU_M5150:
 #endif
 
 #ifdef CONFIG_SYS_HAS_CPU_MIPS64_R1

arch/mips/include/asm/cpu.h

@@ -82,10 +82,10 @@
 #define PRID_IMP_RM7000		0x2700
 #define PRID_IMP_NEVADA		0x2800		/* RM5260 ??? */
 #define PRID_IMP_RM9000		0x3400
-#define PRID_IMP_LOONGSON1	0x4200
+#define PRID_IMP_LOONGSON_32	0x4200  /* Loongson-1 */
 #define PRID_IMP_R5432		0x5400
 #define PRID_IMP_R5500		0x5500
-#define PRID_IMP_LOONGSON2	0x6300
+#define PRID_IMP_LOONGSON_64	0x6300  /* Loongson-2/3 */
 
 #define PRID_IMP_UNKNOWN	0xff00
 
@@ -115,6 +115,8 @@
 #define PRID_IMP_INTERAPTIV_MP	0xa100
 #define PRID_IMP_PROAPTIV_UP	0xa200
 #define PRID_IMP_PROAPTIV_MP	0xa300
+#define PRID_IMP_M5150		0xa700
+#define PRID_IMP_P5600		0xa800
 
 /*
  * These are the PRID's for when 23:16 == PRID_COMP_SIBYTE
@@ -229,6 +231,7 @@
 #define PRID_REV_LOONGSON1B	0x0020
 #define PRID_REV_LOONGSON2E	0x0002
 #define PRID_REV_LOONGSON2F	0x0003
+#define PRID_REV_LOONGSON3A	0x0005
 
 /*
  * Older processors used to encode processor version and revision in two
@@ -296,14 +299,14 @@ enum cpu_type_enum {
 	CPU_4KC, CPU_4KEC, CPU_4KSC, CPU_24K, CPU_34K, CPU_1004K, CPU_74K,
 	CPU_ALCHEMY, CPU_PR4450, CPU_BMIPS32, CPU_BMIPS3300, CPU_BMIPS4350,
 	CPU_BMIPS4380, CPU_BMIPS5000, CPU_JZRISC, CPU_LOONGSON1, CPU_M14KC,
-	CPU_M14KEC, CPU_INTERAPTIV, CPU_PROAPTIV,
+	CPU_M14KEC, CPU_INTERAPTIV, CPU_P5600, CPU_PROAPTIV, CPU_1074K, CPU_M5150,
 
 	/*
 	 * MIPS64 class processors
 	 */
 	CPU_5KC, CPU_5KE, CPU_20KC, CPU_25KF, CPU_SB1, CPU_SB1A, CPU_LOONGSON2,
-	CPU_CAVIUM_OCTEON, CPU_CAVIUM_OCTEON_PLUS, CPU_CAVIUM_OCTEON2,
-	CPU_CAVIUM_OCTEON3, CPU_XLR, CPU_XLP,
+	CPU_LOONGSON3, CPU_CAVIUM_OCTEON, CPU_CAVIUM_OCTEON_PLUS,
+	CPU_CAVIUM_OCTEON2, CPU_CAVIUM_OCTEON3, CPU_XLR, CPU_XLP,
 
 	CPU_LAST
 };
@@ -358,6 +361,7 @@ enum cpu_type_enum {
 #define MIPS_CPU_MICROMIPS	0x01000000 /* CPU has microMIPS capability */
 #define MIPS_CPU_TLBINV		0x02000000 /* CPU supports TLBINV/F */
 #define MIPS_CPU_SEGMENTS	0x04000000 /* CPU supports Segmentation Control registers */
+#define MIPS_CPU_EVA		0x80000000 /* CPU supports Enhanced Virtual Addressing */
 
 /*
  * CPU ASE encodings
@@ -370,5 +374,6 @@ enum cpu_type_enum {
 #define MIPS_ASE_MIPSMT		0x00000020 /* CPU supports MIPS MT */
 #define MIPS_ASE_DSP2P		0x00000040 /* Signal Processing ASE Rev 2 */
 #define MIPS_ASE_VZ		0x00000080 /* Virtualization ASE */
+#define MIPS_ASE_MSA		0x00000100 /* MIPS SIMD Architecture */
 
 #endif /* _ASM_CPU_H */

arch/mips/include/asm/dma-mapping.h

@@ -49,9 +49,14 @@ static inline int dma_mapping_error(struct device *dev, u64 mask)
 static inline int
 dma_set_mask(struct device *dev, u64 mask)
 {
+	struct dma_map_ops *ops = get_dma_ops(dev);
+
 	if(!dev->dma_mask || !dma_supported(dev, mask))
 		return -EIO;
 
+	if (ops->set_dma_mask)
+		return ops->set_dma_mask(dev, mask);
+
 	*dev->dma_mask = mask;
 
 	return 0;

arch/mips/include/asm/fpu.h

@@ -180,7 +180,7 @@ static inline void restore_fp(struct task_struct *tsk)
 		_restore_fp(tsk);
 }
 
-static inline fpureg_t *get_fpu_regs(struct task_struct *tsk)
+static inline union fpureg *get_fpu_regs(struct task_struct *tsk)
 {
 	if (tsk == current) {
 		preempt_disable();

arch/mips/include/asm/futex.h

@@ -12,6 +12,7 @@
 
 #include <linux/futex.h>
 #include <linux/uaccess.h>
+#include <asm/asm-eva.h>
 #include <asm/barrier.h>
 #include <asm/errno.h>
 #include <asm/war.h>
@@ -22,11 +23,11 @@
 		__asm__ __volatile__(					\
 		"	.set	push				\n"	\
 		"	.set	noat				\n"	\
-		"	.set	mips3				\n"	\
+		"	.set	arch=r4000			\n"	\
 		"1:	ll	%1, %4	# __futex_atomic_op	\n"	\
 		"	.set	mips0				\n"	\
 		"	" insn	"				\n"	\
-		"	.set	mips3				\n"	\
+		"	.set	arch=r4000			\n"	\
 		"2:	sc	$1, %2				\n"	\
 		"	beqzl	$1, 1b				\n"	\
 		__WEAK_LLSC_MB						\
@@ -48,12 +49,12 @@
 		__asm__ __volatile__(					\
 		"	.set	push				\n"	\
 		"	.set	noat				\n"	\
-		"	.set	mips3				\n"	\
-		"1:	ll	%1, %4	# __futex_atomic_op	\n"	\
+		"	.set	arch=r4000			\n"	\
+		"1:	"user_ll("%1", "%4")" # __futex_atomic_op\n"	\
 		"	.set	mips0				\n"	\
 		"	" insn	"				\n"	\
-		"	.set	mips3				\n"	\
-		"2:	sc	$1, %2				\n"	\
+		"	.set	arch=r4000			\n"	\
+		"2:	"user_sc("$1", "%2")"			\n"	\
 		"	beqz	$1, 1b				\n"	\
 		__WEAK_LLSC_MB						\
 		"3:						\n"	\
@@ -146,12 +147,12 @@ futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr,
 		"# futex_atomic_cmpxchg_inatomic			\n"
 		"	.set	push					\n"
 		"	.set	noat					\n"
-		"	.set	mips3					\n"
+		"	.set	arch=r4000				\n"
 		"1:	ll	%1, %3					\n"
 		"	bne	%1, %z4, 3f				\n"
 		"	.set	mips0					\n"
 		"	move	$1, %z5					\n"
-		"	.set	mips3					\n"
+		"	.set	arch=r4000				\n"
 		"2:	sc	$1, %2					\n"
 		"	beqzl	$1, 1b					\n"
 		__WEAK_LLSC_MB
@@ -173,13 +174,13 @@ futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr,
 		"# futex_atomic_cmpxchg_inatomic			\n"
 		"	.set	push					\n"
 		"	.set	noat					\n"
-		"	.set	mips3					\n"
-		"1:	ll	%1, %3					\n"
+		"	.set	arch=r4000				\n"
+		"1:	"user_ll("%1", "%3")"				\n"
 		"	bne	%1, %z4, 3f				\n"
 		"	.set	mips0					\n"
 		"	move	$1, %z5					\n"
-		"	.set	mips3					\n"
-		"2:	sc	$1, %2					\n"
+		"	.set	arch=r4000				\n"
+		"2:	"user_sc("$1", "%2")"				\n"
 		"	beqz	$1, 1b					\n"
 		__WEAK_LLSC_MB
 		"3:							\n"

arch/mips/include/asm/fw/fw.h

@@ -38,7 +38,7 @@ extern int *_fw_envp;
 
 extern void fw_init_cmdline(void);
 extern char *fw_getcmdline(void);
-extern fw_memblock_t *fw_getmdesc(void);
+extern fw_memblock_t *fw_getmdesc(int);
 extern void fw_meminit(void);
 extern char *fw_getenv(char *name);
 extern unsigned long fw_getenvl(char *name);

arch/mips/include/asm/gcmpregs.h

@@ -1,125 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2000, 07 MIPS Technologies, Inc.
- *
- * Multiprocessor Subsystem Register Definitions
- *
- */
-#ifndef _ASM_GCMPREGS_H
-#define _ASM_GCMPREGS_H
-
-
-/* Offsets to major blocks within GCMP from GCMP base */
-#define GCMP_GCB_OFS		0x0000 /* Global Control Block */
-#define GCMP_CLCB_OFS		0x2000 /* Core Local Control Block */
-#define GCMP_COCB_OFS		0x4000 /* Core Other Control Block */
-#define GCMP_GDB_OFS		0x8000 /* Global Debug Block */
-
-/* Offsets to individual GCMP registers from GCMP base */
-#define GCMPOFS(block, tag, reg)	\
-	(GCMP_##block##_OFS + GCMP_##tag##_##reg##_OFS)
-#define GCMPOFSn(block, tag, reg, n) \
-	(GCMP_##block##_OFS + GCMP_##tag##_##reg##_OFS(n))
-
-#define GCMPGCBOFS(reg)		GCMPOFS(GCB, GCB, reg)
-#define GCMPGCBOFSn(reg, n)	GCMPOFSn(GCB, GCB, reg, n)
-#define GCMPCLCBOFS(reg)	GCMPOFS(CLCB, CCB, reg)
-#define GCMPCOCBOFS(reg)	GCMPOFS(COCB, CCB, reg)
-#define GCMPGDBOFS(reg)		GCMPOFS(GDB, GDB, reg)
-
-/* GCMP register access */
-#define GCMPGCB(reg)			REGP(_gcmp_base, GCMPGCBOFS(reg))
-#define GCMPGCBn(reg, n)	       REGP(_gcmp_base, GCMPGCBOFSn(reg, n))
-#define GCMPCLCB(reg)			REGP(_gcmp_base, GCMPCLCBOFS(reg))
-#define GCMPCOCB(reg)			REGP(_gcmp_base, GCMPCOCBOFS(reg))
-#define GCMPGDB(reg)			REGP(_gcmp_base, GCMPGDBOFS(reg))
-
-/* Mask generation */
-#define GCMPMSK(block, reg, bits)	(MSK(bits)<<GCMP_##block##_##reg##_SHF)
-#define GCMPGCBMSK(reg, bits)		GCMPMSK(GCB, reg, bits)
-#define GCMPCCBMSK(reg, bits)		GCMPMSK(CCB, reg, bits)
-#define GCMPGDBMSK(reg, bits)		GCMPMSK(GDB, reg, bits)
-
-/* GCB registers */
-#define GCMP_GCB_GC_OFS			0x0000	/* Global Config Register */
-#define	 GCMP_GCB_GC_NUMIOCU_SHF	8
-#define	 GCMP_GCB_GC_NUMIOCU_MSK	GCMPGCBMSK(GC_NUMIOCU, 4)
-#define	 GCMP_GCB_GC_NUMCORES_SHF	0
-#define	 GCMP_GCB_GC_NUMCORES_MSK	GCMPGCBMSK(GC_NUMCORES, 8)
-#define GCMP_GCB_GCMPB_OFS		0x0008		/* Global GCMP Base */
-#define	 GCMP_GCB_GCMPB_GCMPBASE_SHF	15
-#define	 GCMP_GCB_GCMPB_GCMPBASE_MSK	GCMPGCBMSK(GCMPB_GCMPBASE, 17)
-#define	 GCMP_GCB_GCMPB_CMDEFTGT_SHF	0
-#define	 GCMP_GCB_GCMPB_CMDEFTGT_MSK	GCMPGCBMSK(GCMPB_CMDEFTGT, 2)
-#define	 GCMP_GCB_GCMPB_CMDEFTGT_DISABLED	0
-#define	 GCMP_GCB_GCMPB_CMDEFTGT_MEM		1
-#define	 GCMP_GCB_GCMPB_CMDEFTGT_IOCU1		2
-#define	 GCMP_GCB_GCMPB_CMDEFTGT_IOCU2		3
-#define GCMP_GCB_CCMC_OFS		0x0010	/* Global CM Control */
-#define GCMP_GCB_GCSRAP_OFS		0x0020	/* Global CSR Access Privilege */
-#define	 GCMP_GCB_GCSRAP_CMACCESS_SHF	0
-#define	 GCMP_GCB_GCSRAP_CMACCESS_MSK	GCMPGCBMSK(GCSRAP_CMACCESS, 8)
-#define GCMP_GCB_GCMPREV_OFS		0x0030	/* GCMP Revision Register */
-#define GCMP_GCB_GCMEM_OFS		0x0040	/* Global CM Error Mask */
-#define GCMP_GCB_GCMEC_OFS		0x0048	/* Global CM Error Cause */
-#define	 GCMP_GCB_GMEC_ERROR_TYPE_SHF	27
-#define	 GCMP_GCB_GMEC_ERROR_TYPE_MSK	GCMPGCBMSK(GMEC_ERROR_TYPE, 5)
-#define	 GCMP_GCB_GMEC_ERROR_INFO_SHF	0
-#define	 GCMP_GCB_GMEC_ERROR_INFO_MSK	GCMPGCBMSK(GMEC_ERROR_INFO, 27)
-#define GCMP_GCB_GCMEA_OFS		0x0050	/* Global CM Error Address */
-#define GCMP_GCB_GCMEO_OFS		0x0058	/* Global CM Error Multiple */
-#define	 GCMP_GCB_GMEO_ERROR_2ND_SHF	0
-#define	 GCMP_GCB_GMEO_ERROR_2ND_MSK	GCMPGCBMSK(GMEO_ERROR_2ND, 5)
-#define GCMP_GCB_GICBA_OFS		0x0080	/* Global Interrupt Controller Base Address */
-#define	 GCMP_GCB_GICBA_BASE_SHF	17
-#define	 GCMP_GCB_GICBA_BASE_MSK	GCMPGCBMSK(GICBA_BASE, 15)
-#define	 GCMP_GCB_GICBA_EN_SHF		0
-#define	 GCMP_GCB_GICBA_EN_MSK		GCMPGCBMSK(GICBA_EN, 1)
-
-/* GCB Regions */
-#define GCMP_GCB_CMxBASE_OFS(n)		(0x0090+16*(n))		/* Global Region[0-3] Base Address */
-#define	 GCMP_GCB_CMxBASE_BASE_SHF	16
-#define	 GCMP_GCB_CMxBASE_BASE_MSK	GCMPGCBMSK(CMxBASE_BASE, 16)
-#define GCMP_GCB_CMxMASK_OFS(n)		(0x0098+16*(n))		/* Global Region[0-3] Address Mask */
-#define	 GCMP_GCB_CMxMASK_MASK_SHF	16
-#define	 GCMP_GCB_CMxMASK_MASK_MSK	GCMPGCBMSK(CMxMASK_MASK, 16)
-#define	 GCMP_GCB_CMxMASK_CMREGTGT_SHF	0
-#define	 GCMP_GCB_CMxMASK_CMREGTGT_MSK	GCMPGCBMSK(CMxMASK_CMREGTGT, 2)
-#define	 GCMP_GCB_CMxMASK_CMREGTGT_MEM	 0
-#define	 GCMP_GCB_CMxMASK_CMREGTGT_MEM1	 1
-#define	 GCMP_GCB_CMxMASK_CMREGTGT_IOCU1 2
-#define	 GCMP_GCB_CMxMASK_CMREGTGT_IOCU2 3
-
-
-/* Core local/Core other control block registers */
-#define GCMP_CCB_RESETR_OFS		0x0000			/* Reset Release */
-#define	 GCMP_CCB_RESETR_INRESET_SHF	0
-#define	 GCMP_CCB_RESETR_INRESET_MSK	GCMPCCBMSK(RESETR_INRESET, 16)
-#define GCMP_CCB_COHCTL_OFS		0x0008			/* Coherence Control */
-#define	 GCMP_CCB_COHCTL_DOMAIN_SHF	0
-#define	 GCMP_CCB_COHCTL_DOMAIN_MSK	GCMPCCBMSK(COHCTL_DOMAIN, 8)
-#define GCMP_CCB_CFG_OFS		0x0010			/* Config */
-#define	 GCMP_CCB_CFG_IOCUTYPE_SHF	10
-#define	 GCMP_CCB_CFG_IOCUTYPE_MSK	GCMPCCBMSK(CFG_IOCUTYPE, 2)
-#define	  GCMP_CCB_CFG_IOCUTYPE_CPU	0
-#define	  GCMP_CCB_CFG_IOCUTYPE_NCIOCU	1
-#define	  GCMP_CCB_CFG_IOCUTYPE_CIOCU	2
-#define	 GCMP_CCB_CFG_NUMVPE_SHF	0
-#define	 GCMP_CCB_CFG_NUMVPE_MSK	GCMPCCBMSK(CFG_NUMVPE, 10)
-#define GCMP_CCB_OTHER_OFS		0x0018		/* Other Address */
-#define	 GCMP_CCB_OTHER_CORENUM_SHF	16
-#define	 GCMP_CCB_OTHER_CORENUM_MSK	GCMPCCBMSK(OTHER_CORENUM, 16)
-#define GCMP_CCB_RESETBASE_OFS		0x0020		/* Reset Exception Base */
-#define	 GCMP_CCB_RESETBASE_BEV_SHF	12
-#define	 GCMP_CCB_RESETBASE_BEV_MSK	GCMPCCBMSK(RESETBASE_BEV, 20)
-#define GCMP_CCB_ID_OFS			0x0028		/* Identification */
-#define GCMP_CCB_DINTGROUP_OFS		0x0030		/* DINT Group Participate */
-#define GCMP_CCB_DBGGROUP_OFS		0x0100		/* DebugBreak Group */
-
-extern int __init gcmp_probe(unsigned long, unsigned long);
-extern int __init gcmp_niocu(void);
-extern void __init gcmp_setregion(int, unsigned long, unsigned long, int);
-#endif /* _ASM_GCMPREGS_H */

arch/mips/include/asm/gic.h

@@ -11,6 +11,9 @@
 #ifndef _ASM_GICREGS_H
 #define _ASM_GICREGS_H
 
+#include <linux/bitmap.h>
+#include <linux/threads.h>
+
 #undef	GICISBYTELITTLEENDIAN
 
 /* Constants */

arch/mips/include/asm/io.h

@@ -331,7 +331,7 @@ static inline void pfx##write##bwlq(type val,				\
 		if (irq)						\
 			local_irq_save(__flags);			\
 		__asm__ __volatile__(					\
-			".set	mips3"		"\t\t# __writeq""\n\t"	\
+			".set	arch=r4000"	"\t\t# __writeq""\n\t"	\
 			"dsll32 %L0, %L0, 0"			"\n\t"	\
 			"dsrl32 %L0, %L0, 0"			"\n\t"	\
 			"dsll32 %M0, %M0, 0"			"\n\t"	\
@@ -361,7 +361,7 @@ static inline type pfx##read##bwlq(const volatile void __iomem *mem)	\
 		if (irq)						\
 			local_irq_save(__flags);			\
 		__asm__ __volatile__(					\
-			".set	mips3"		"\t\t# __readq" "\n\t"	\
+			".set	arch=r4000"	"\t\t# __readq" "\n\t"	\
 			"ld	%L0, %1"			"\n\t"	\
 			"dsra32 %M0, %L0, 0"			"\n\t"	\
 			"sll	%L0, %L0, 0"			"\n\t"	\
@@ -584,7 +584,7 @@ static inline void memcpy_toio(volatile void __iomem *dst, const void *src, int
  *
  * This API used to be exported; it now is for arch code internal use only.
  */
-#ifdef CONFIG_DMA_NONCOHERENT
+#if defined(CONFIG_DMA_NONCOHERENT) || defined(CONFIG_DMA_MAYBE_COHERENT)
 
 extern void (*_dma_cache_wback_inv)(unsigned long start, unsigned long size);
 extern void (*_dma_cache_wback)(unsigned long start, unsigned long size);
@@ -603,7 +603,7 @@ extern void (*_dma_cache_inv)(unsigned long start, unsigned long size);
 #define dma_cache_inv(start,size)	\
 	do { (void) (start); (void) (size); } while (0)
 
-#endif /* CONFIG_DMA_NONCOHERENT */
+#endif /* CONFIG_DMA_NONCOHERENT || CONFIG_DMA_MAYBE_COHERENT */
 
 /*
  * Read a 32-bit register that requires a 64-bit read cycle on the bus.

arch/mips/include/asm/local.h

@@ -33,7 +33,7 @@ static __inline__ long local_add_return(long i, local_t * l)
 		unsigned long temp;
 
 		__asm__ __volatile__(
-		"	.set	mips3					\n"
+		"	.set	arch=r4000				\n"
 		"1:"	__LL	"%1, %2		# local_add_return	\n"
 		"	addu	%0, %1, %3				\n"
 			__SC	"%0, %2					\n"
@@ -47,7 +47,7 @@ static __inline__ long local_add_return(long i, local_t * l)
 		unsigned long temp;
 
 		__asm__ __volatile__(
-		"	.set	mips3					\n"
+		"	.set	arch=r4000				\n"
 		"1:"	__LL	"%1, %2		# local_add_return	\n"
 		"	addu	%0, %1, %3				\n"
 			__SC	"%0, %2					\n"
@@ -78,7 +78,7 @@ static __inline__ long local_sub_return(long i, local_t * l)
 		unsigned long temp;
 
 		__asm__ __volatile__(
-		"	.set	mips3					\n"
+		"	.set	arch=r4000				\n"
 		"1:"	__LL	"%1, %2		# local_sub_return	\n"
 		"	subu	%0, %1, %3				\n"
 			__SC	"%0, %2					\n"
@@ -92,7 +92,7 @@ static __inline__ long local_sub_return(long i, local_t * l)
 		unsigned long temp;
 
 		__asm__ __volatile__(
-		"	.set	mips3					\n"
+		"	.set	arch=r4000				\n"
 		"1:"	__LL	"%1, %2		# local_sub_return	\n"
 		"	subu	%0, %1, %3				\n"
 			__SC	"%0, %2					\n"

arch/mips/include/asm/mach-au1x00/au1000.h

@@ -1161,18 +1161,6 @@ enum soc_au1200_ints {
 #define MAC_RX_BUFF3_STATUS	0x30
 #define MAC_RX_BUFF3_ADDR	0x34
 
-#define UART_RX		0	/* Receive buffer */
-#define UART_TX		4	/* Transmit buffer */
-#define UART_IER	8	/* Interrupt Enable Register */
-#define UART_IIR	0xC	/* Interrupt ID Register */
-#define UART_FCR	0x10	/* FIFO Control Register */
-#define UART_LCR	0x14	/* Line Control Register */
-#define UART_MCR	0x18	/* Modem Control Register */
-#define UART_LSR	0x1C	/* Line Status Register */
-#define UART_MSR	0x20	/* Modem Status Register */
-#define UART_CLK	0x28	/* Baud Rate Clock Divider */
-#define UART_MOD_CNTRL	0x100	/* Module Control */
-
 /* SSIO */
 #define SSI0_STATUS		0xB1600000
 #  define SSI_STATUS_BF		(1 << 4)

arch/mips/include/asm/mach-bcm47xx/bcm47xx_board.h

@@ -27,7 +27,11 @@ enum bcm47xx_board {
 	BCM47XX_BOARD_ASUS_WL700GE,
 	BCM47XX_BOARD_ASUS_WLHDD,
 
+	BCM47XX_BOARD_BELKIN_F7D3301,
+	BCM47XX_BOARD_BELKIN_F7D3302,
 	BCM47XX_BOARD_BELKIN_F7D4301,
+	BCM47XX_BOARD_BELKIN_F7D4302,
+	BCM47XX_BOARD_BELKIN_F7D4401,
 
 	BCM47XX_BOARD_BUFFALO_WBR2_G54,
 	BCM47XX_BOARD_BUFFALO_WHR2_A54G54,
@@ -66,7 +70,7 @@ enum bcm47xx_board {
 	BCM47XX_BOARD_LINKSYS_WRT310NV1,
 	BCM47XX_BOARD_LINKSYS_WRT310NV2,
 	BCM47XX_BOARD_LINKSYS_WRT54G3GV2,
-	BCM47XX_BOARD_LINKSYS_WRT54GSV1,
+	BCM47XX_BOARD_LINKSYS_WRT54G,
 	BCM47XX_BOARD_LINKSYS_WRT610NV1,
 	BCM47XX_BOARD_LINKSYS_WRT610NV2,
 	BCM47XX_BOARD_LINKSYS_WRTSL54GS,
@@ -94,6 +98,8 @@ enum bcm47xx_board {
 
 	BCM47XX_BOARD_PHICOMM_M1,
 
+	BCM47XX_BOARD_SIEMENS_SE505V2,
+
 	BCM47XX_BOARD_SIMPLETECH_SIMPLESHARE,
 
 	BCM47XX_BOARD_ZTE_H218N,

arch/mips/include/asm/mach-db1x00/db1200.h

@@ -1,91 +0,0 @@
-/*
- * AMD Alchemy DBAu1200 Reference Board
- * Board register defines.
- *
- * ########################################################################
- *
- *  This program is free software; you can distribute it and/or modify it
- *  under the terms of the GNU General Public License (Version 2) as
- *  published by the Free Software Foundation.
- *
- *  This program is distributed in the hope it will be useful, but WITHOUT
- *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- *  for more details.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- *
- * ########################################################################
- *
- *
- */
-#ifndef __ASM_DB1200_H
-#define __ASM_DB1200_H
-
-#include <linux/types.h>
-#include <asm/mach-au1x00/au1000.h>
-#include <asm/mach-au1x00/au1xxx_psc.h>
-
-/* Bit positions for the different interrupt sources */
-#define BCSR_INT_IDE		0x0001
-#define BCSR_INT_ETH		0x0002
-#define BCSR_INT_PC0		0x0004
-#define BCSR_INT_PC0STSCHG	0x0008
-#define BCSR_INT_PC1		0x0010
-#define BCSR_INT_PC1STSCHG	0x0020
-#define BCSR_INT_DC		0x0040
-#define BCSR_INT_FLASHBUSY	0x0080
-#define BCSR_INT_PC0INSERT	0x0100
-#define BCSR_INT_PC0EJECT	0x0200
-#define BCSR_INT_PC1INSERT	0x0400
-#define BCSR_INT_PC1EJECT	0x0800
-#define BCSR_INT_SD0INSERT	0x1000
-#define BCSR_INT_SD0EJECT	0x2000
-#define BCSR_INT_SD1INSERT	0x4000
-#define BCSR_INT_SD1EJECT	0x8000
-
-#define IDE_REG_SHIFT		5
-
-#define DB1200_IDE_PHYS_ADDR	0x18800000
-#define DB1200_IDE_PHYS_LEN	(16 << IDE_REG_SHIFT)
-#define DB1200_ETH_PHYS_ADDR	0x19000300
-#define DB1200_NAND_PHYS_ADDR	0x20000000
-
-#define PB1200_IDE_PHYS_ADDR	0x0C800000
-#define PB1200_ETH_PHYS_ADDR	0x0D000300
-#define PB1200_NAND_PHYS_ADDR	0x1C000000
-
-/*
- * External Interrupts for DBAu1200 as of 8/6/2004.
- * Bit positions in the CPLD registers can be calculated by taking
- * the interrupt define and subtracting the DB1200_INT_BEGIN value.
- *
- *   Example: IDE bis pos is  = 64 - 64
- *	      ETH bit pos is  = 65 - 64
- */
-enum external_db1200_ints {
-	DB1200_INT_BEGIN	= AU1000_MAX_INTR + 1,
-
-	DB1200_IDE_INT		= DB1200_INT_BEGIN,
-	DB1200_ETH_INT,
-	DB1200_PC0_INT,
-	DB1200_PC0_STSCHG_INT,
-	DB1200_PC1_INT,
-	DB1200_PC1_STSCHG_INT,
-	DB1200_DC_INT,
-	DB1200_FLASHBUSY_INT,
-	DB1200_PC0_INSERT_INT,
-	DB1200_PC0_EJECT_INT,
-	DB1200_PC1_INSERT_INT,
-	DB1200_PC1_EJECT_INT,
-	DB1200_SD0_INSERT_INT,
-	DB1200_SD0_EJECT_INT,
-	PB1200_SD1_INSERT_INT,
-	PB1200_SD1_EJECT_INT,
-
-	DB1200_INT_END		= DB1200_INT_BEGIN + 15,
-};
-
-#endif /* __ASM_DB1200_H */

arch/mips/include/asm/mach-db1x00/db1300.h

@@ -1,40 +0,0 @@
-/*
- * NetLogic DB1300 board constants
- */
-
-#ifndef _DB1300_H_
-#define _DB1300_H_
-
-/* FPGA (external mux) interrupt sources */
-#define DB1300_FIRST_INT	(ALCHEMY_GPIC_INT_LAST + 1)
-#define DB1300_IDE_INT		(DB1300_FIRST_INT + 0)
-#define DB1300_ETH_INT		(DB1300_FIRST_INT + 1)
-#define DB1300_CF_INT		(DB1300_FIRST_INT + 2)
-#define DB1300_VIDEO_INT	(DB1300_FIRST_INT + 4)
-#define DB1300_HDMI_INT		(DB1300_FIRST_INT + 5)
-#define DB1300_DC_INT		(DB1300_FIRST_INT + 6)
-#define DB1300_FLASH_INT	(DB1300_FIRST_INT + 7)
-#define DB1300_CF_INSERT_INT	(DB1300_FIRST_INT + 8)
-#define DB1300_CF_EJECT_INT	(DB1300_FIRST_INT + 9)
-#define DB1300_AC97_INT		(DB1300_FIRST_INT + 10)
-#define DB1300_AC97_PEN_INT	(DB1300_FIRST_INT + 11)
-#define DB1300_SD1_INSERT_INT	(DB1300_FIRST_INT + 12)
-#define DB1300_SD1_EJECT_INT	(DB1300_FIRST_INT + 13)
-#define DB1300_OTG_VBUS_OC_INT	(DB1300_FIRST_INT + 14)
-#define DB1300_HOST_VBUS_OC_INT (DB1300_FIRST_INT + 15)
-#define DB1300_LAST_INT		(DB1300_FIRST_INT + 15)
-
-/* SMSC9210 CS */
-#define DB1300_ETH_PHYS_ADDR	0x19000000
-#define DB1300_ETH_PHYS_END	0x197fffff
-
-/* ATA CS */
-#define DB1300_IDE_PHYS_ADDR	0x18800000
-#define DB1300_IDE_REG_SHIFT	5
-#define DB1300_IDE_PHYS_LEN	(16 << DB1300_IDE_REG_SHIFT)
-
-/* NAND CS */
-#define DB1300_NAND_PHYS_ADDR	0x20000000
-#define DB1300_NAND_PHYS_END	0x20000fff
-
-#endif	/* _DB1300_H_ */

arch/mips/include/asm/mach-loongson/boot_param.h

@@ -0,0 +1,163 @@
+#ifndef __ASM_MACH_LOONGSON_BOOT_PARAM_H_
+#define __ASM_MACH_LOONGSON_BOOT_PARAM_H_
+
+#define SYSTEM_RAM_LOW		1
+#define SYSTEM_RAM_HIGH		2
+#define MEM_RESERVED		3
+#define PCI_IO			4
+#define PCI_MEM			5
+#define LOONGSON_CFG_REG	6
+#define VIDEO_ROM		7
+#define ADAPTER_ROM		8
+#define ACPI_TABLE		9
+#define MAX_MEMORY_TYPE		10
+
+#define LOONGSON3_BOOT_MEM_MAP_MAX 128
+struct efi_memory_map_loongson {
+	u16 vers;	/* version of efi_memory_map */
+	u32 nr_map;	/* number of memory_maps */
+	u32 mem_freq;	/* memory frequence */
+	struct mem_map {
+		u32 node_id;	/* node_id which memory attached to */
+		u32 mem_type;	/* system memory, pci memory, pci io, etc. */
+		u64 mem_start;	/* memory map start address */
+		u32 mem_size;	/* each memory_map size, not the total size */
+	} map[LOONGSON3_BOOT_MEM_MAP_MAX];
+} __packed;
+
+enum loongson_cpu_type {
+	Loongson_2E = 0,
+	Loongson_2F = 1,
+	Loongson_3A = 2,
+	Loongson_3B = 3,
+	Loongson_1A = 4,
+	Loongson_1B = 5
+};
+
+/*
+ * Capability and feature descriptor structure for MIPS CPU
+ */
+struct efi_cpuinfo_loongson {
+	u16 vers;     /* version of efi_cpuinfo_loongson */
+	u32 processor_id; /* PRID, e.g. 6305, 6306 */
+	u32 cputype;  /* Loongson_3A/3B, etc. */
+	u32 total_node;   /* num of total numa nodes */
+	u32 cpu_startup_core_id; /* Core id */
+	u32 cpu_clock_freq; /* cpu_clock */
+	u32 nr_cpus;
+} __packed;
+
+struct system_loongson {
+	u16 vers;     /* version of system_loongson */
+	u32 ccnuma_smp; /* 0: no numa; 1: has numa */
+	u32 sing_double_channel; /* 1:single; 2:double */
+} __packed;
+
+struct irq_source_routing_table {
+	u16 vers;
+	u16 size;
+	u16 rtr_bus;
+	u16 rtr_devfn;
+	u32 vendor;
+	u32 device;
+	u32 PIC_type;   /* conform use HT or PCI to route to CPU-PIC */
+	u64 ht_int_bit; /* 3A: 1<<24; 3B: 1<<16 */
+	u64 ht_enable;  /* irqs used in this PIC */
+	u32 node_id;    /* node id: 0x0-0; 0x1-1; 0x10-2; 0x11-3 */
+	u64 pci_mem_start_addr;
+	u64 pci_mem_end_addr;
+	u64 pci_io_start_addr;
+	u64 pci_io_end_addr;
+	u64 pci_config_addr;
+	u32 dma_mask_bits;
+} __packed;
+
+struct interface_info {
+	u16 vers; /* version of the specificition */
+	u16 size;
+	u8  flag;
+	char description[64];
+} __packed;
+
+#define MAX_RESOURCE_NUMBER 128
+struct resource_loongson {
+	u64 start; /* resource start address */
+	u64 end;   /* resource end address */
+	char name[64];
+	u32 flags;
+};
+
+struct archdev_data {};  /* arch specific additions */
+
+struct board_devices {
+	char name[64];    /* hold the device name */
+	u32 num_resources; /* number of device_resource */
+	/* for each device's resource */
+	struct resource_loongson resource[MAX_RESOURCE_NUMBER];
+	/* arch specific additions */
+	struct archdev_data archdata;
+};
+
+struct loongson_special_attribute {
+	u16 vers;     /* version of this special */
+	char special_name[64]; /* special_atribute_name */
+	u32 loongson_special_type; /* type of special device */
+	/* for each device's resource */
+	struct resource_loongson resource[MAX_RESOURCE_NUMBER];
+};
+
+struct loongson_params {
+	u64 memory_offset;	/* efi_memory_map_loongson struct offset */
+	u64 cpu_offset;		/* efi_cpuinfo_loongson struct offset */
+	u64 system_offset;	/* system_loongson struct offset */
+	u64 irq_offset;		/* irq_source_routing_table struct offset */
+	u64 interface_offset;	/* interface_info struct offset */
+	u64 special_offset;	/* loongson_special_attribute struct offset */
+	u64 boarddev_table_offset;  /* board_devices offset */
+};
+
+struct smbios_tables {
+	u16 vers;     /* version of smbios */
+	u64 vga_bios; /* vga_bios address */
+	struct loongson_params lp;
+};
+
+struct efi_reset_system_t {
+	u64 ResetCold;
+	u64 ResetWarm;
+	u64 ResetType;
+	u64 Shutdown;
+	u64 DoSuspend; /* NULL if not support */
+};
+
+struct efi_loongson {
+	u64 mps;	/* MPS table */
+	u64 acpi;	/* ACPI table (IA64 ext 0.71) */
+	u64 acpi20;	/* ACPI table (ACPI 2.0) */
+	struct smbios_tables smbios;	/* SM BIOS table */
+	u64 sal_systab;	/* SAL system table */
+	u64 boot_info;	/* boot info table */
+};
+
+struct boot_params {
+	struct efi_loongson efi;
+	struct efi_reset_system_t reset_system;
+};
+
+struct loongson_system_configuration {
+	u32 nr_cpus;
+	enum loongson_cpu_type cputype;
+	u64 ht_control_base;
+	u64 pci_mem_start_addr;
+	u64 pci_mem_end_addr;
+	u64 pci_io_base;
+	u64 restart_addr;
+	u64 poweroff_addr;
+	u64 suspend_addr;
+	u64 vgabios_addr;
+	u32 dma_mask_bits;
+};
+
+extern struct efi_memory_map_loongson *loongson_memmap;
+extern struct loongson_system_configuration loongson_sysconf;
+#endif

arch/mips/include/asm/mach-loongson/dma-coherence.h

@@ -11,24 +11,40 @@
 #ifndef __ASM_MACH_LOONGSON_DMA_COHERENCE_H
 #define __ASM_MACH_LOONGSON_DMA_COHERENCE_H
 
+#ifdef CONFIG_SWIOTLB
+#include <linux/swiotlb.h>
+#endif
+
 struct device;
 
+extern dma_addr_t phys_to_dma(struct device *dev, phys_addr_t paddr);
+extern phys_addr_t dma_to_phys(struct device *dev, dma_addr_t daddr);
 static inline dma_addr_t plat_map_dma_mem(struct device *dev, void *addr,
 					  size_t size)
 {
+#ifdef CONFIG_CPU_LOONGSON3
+	return virt_to_phys(addr);
+#else
 	return virt_to_phys(addr) | 0x80000000;
+#endif
 }
 
 static inline dma_addr_t plat_map_dma_mem_page(struct device *dev,
 					       struct page *page)
 {
+#ifdef CONFIG_CPU_LOONGSON3
+	return page_to_phys(page);
+#else
 	return page_to_phys(page) | 0x80000000;
+#endif
 }
 
 static inline unsigned long plat_dma_addr_to_phys(struct device *dev,
 	dma_addr_t dma_addr)
 {
-#if defined(CONFIG_CPU_LOONGSON2F) && defined(CONFIG_64BIT)
+#if defined(CONFIG_CPU_LOONGSON3) && defined(CONFIG_64BIT)
+	return dma_addr;
+#elif defined(CONFIG_CPU_LOONGSON2F) && defined(CONFIG_64BIT)
 	return (dma_addr > 0x8fffffff) ? dma_addr : (dma_addr & 0x0fffffff);
 #else
 	return dma_addr & 0x7fffffff;
@@ -55,7 +71,11 @@ static inline int plat_dma_supported(struct device *dev, u64 mask)
 
 static inline int plat_device_is_coherent(struct device *dev)
 {
+#ifdef CONFIG_DMA_NONCOHERENT
 	return 0;
+#else
+	return 1;
+#endif /* CONFIG_DMA_NONCOHERENT */
 }
 
 #endif /* __ASM_MACH_LOONGSON_DMA_COHERENCE_H */

arch/mips/include/asm/mach-loongson/irq.h

@@ -0,0 +1,44 @@
+#ifndef __ASM_MACH_LOONGSON_IRQ_H_
+#define __ASM_MACH_LOONGSON_IRQ_H_
+
+#include <boot_param.h>
+
+#ifdef CONFIG_CPU_LOONGSON3
+
+/* cpu core interrupt numbers */
+#define MIPS_CPU_IRQ_BASE 56
+
+#define LOONGSON_UART_IRQ   (MIPS_CPU_IRQ_BASE + 2) /* UART */
+#define LOONGSON_HT1_IRQ    (MIPS_CPU_IRQ_BASE + 3) /* HT1 */
+#define LOONGSON_TIMER_IRQ  (MIPS_CPU_IRQ_BASE + 7) /* CPU Timer */
+
+#define LOONGSON_HT1_CFG_BASE		loongson_sysconf.ht_control_base
+#define LOONGSON_HT1_INT_VECTOR_BASE	(LOONGSON_HT1_CFG_BASE + 0x80)
+#define LOONGSON_HT1_INT_EN_BASE	(LOONGSON_HT1_CFG_BASE + 0xa0)
+#define LOONGSON_HT1_INT_VECTOR(n)	\
+		LOONGSON3_REG32(LOONGSON_HT1_INT_VECTOR_BASE, 4 * (n))
+#define LOONGSON_HT1_INTN_EN(n)		\
+		LOONGSON3_REG32(LOONGSON_HT1_INT_EN_BASE, 4 * (n))
+
+#define LOONGSON_INT_ROUTER_OFFSET	0x1400
+#define LOONGSON_INT_ROUTER_INTEN	\
+	  LOONGSON3_REG32(LOONGSON3_REG_BASE, LOONGSON_INT_ROUTER_OFFSET + 0x24)
+#define LOONGSON_INT_ROUTER_INTENSET	\
+	  LOONGSON3_REG32(LOONGSON3_REG_BASE, LOONGSON_INT_ROUTER_OFFSET + 0x28)
+#define LOONGSON_INT_ROUTER_INTENCLR	\
+	  LOONGSON3_REG32(LOONGSON3_REG_BASE, LOONGSON_INT_ROUTER_OFFSET + 0x2c)
+#define LOONGSON_INT_ROUTER_ENTRY(n)	\
+	  LOONGSON3_REG8(LOONGSON3_REG_BASE, LOONGSON_INT_ROUTER_OFFSET + n)
+#define LOONGSON_INT_ROUTER_LPC		LOONGSON_INT_ROUTER_ENTRY(0x0a)
+#define LOONGSON_INT_ROUTER_HT1(n)	LOONGSON_INT_ROUTER_ENTRY(n + 0x18)
+
+#define LOONGSON_INT_CORE0_INT0		0x11 /* route to int 0 of core 0 */
+#define LOONGSON_INT_CORE0_INT1		0x21 /* route to int 1 of core 0 */
+
+#endif
+
+extern void fixup_irqs(void);
+extern void loongson3_ipi_interrupt(struct pt_regs *regs);
+
+#include_next <irq.h>
+#endif /* __ASM_MACH_LOONGSON_IRQ_H_ */

arch/mips/include/asm/mach-loongson/loongson.h

@@ -15,6 +15,7 @@
 #include <linux/init.h>
 #include <linux/irq.h>
 #include <linux/kconfig.h>
+#include <boot_param.h>
 
 /* loongson internal northbridge initialization */
 extern void bonito_irq_init(void);
@@ -24,8 +25,9 @@ extern void mach_prepare_reboot(void);
 extern void mach_prepare_shutdown(void);
 
 /* environment arguments from bootloader */
-extern unsigned long cpu_clock_freq;
-extern unsigned long memsize, highmemsize;
+extern u32 cpu_clock_freq;
+extern u32 memsize, highmemsize;
+extern struct plat_smp_ops loongson3_smp_ops;
 
 /* loongson-specific command line, env and memory initialization */
 extern void __init prom_init_memory(void);
@@ -61,6 +63,12 @@ extern int mach_i8259_irq(void);
 #define LOONGSON_REG(x) \
 	(*(volatile u32 *)((char *)CKSEG1ADDR(LOONGSON_REG_BASE) + (x)))
 
+#define LOONGSON3_REG8(base, x) \
+	(*(volatile u8 *)((char *)TO_UNCAC(base) + (x)))
+
+#define LOONGSON3_REG32(base, x) \
+	(*(volatile u32 *)((char *)TO_UNCAC(base) + (x)))
+
 #define LOONGSON_IRQ_BASE	32
 #define LOONGSON2_PERFCNT_IRQ	(MIPS_CPU_IRQ_BASE + 6) /* cpu perf counter */
 
@@ -86,6 +94,10 @@ static inline void do_perfcnt_IRQ(void)
 #define LOONGSON_REG_BASE	0x1fe00000
 #define LOONGSON_REG_SIZE	0x00100000	/* 256Bytes + 256Bytes + ??? */
 #define LOONGSON_REG_TOP	(LOONGSON_REG_BASE+LOONGSON_REG_SIZE-1)
+/* Loongson-3 specific registers */
+#define LOONGSON3_REG_BASE	0x3ff00000
+#define LOONGSON3_REG_SIZE	0x00100000	/* 256Bytes + 256Bytes + ??? */
+#define LOONGSON3_REG_TOP	(LOONGSON3_REG_BASE+LOONGSON3_REG_SIZE-1)
 
 #define LOONGSON_LIO1_BASE	0x1ff00000
 #define LOONGSON_LIO1_SIZE	0x00100000	/* 1M */
@@ -101,7 +113,13 @@ static inline void do_perfcnt_IRQ(void)
 #define LOONGSON_PCICFG_BASE	0x1fe80000
 #define LOONGSON_PCICFG_SIZE	0x00000800	/* 2K */
 #define LOONGSON_PCICFG_TOP	(LOONGSON_PCICFG_BASE+LOONGSON_PCICFG_SIZE-1)
+
+#if defined(CONFIG_HT_PCI)
+#define LOONGSON_PCIIO_BASE	loongson_sysconf.pci_io_base
+#else
 #define LOONGSON_PCIIO_BASE	0x1fd00000
+#endif
+
 #define LOONGSON_PCIIO_SIZE	0x00100000	/* 1M */
 #define LOONGSON_PCIIO_TOP	(LOONGSON_PCIIO_BASE+LOONGSON_PCIIO_SIZE-1)
 
@@ -231,6 +249,9 @@ static inline void do_perfcnt_IRQ(void)
 #define LOONGSON_PXARB_CFG		LOONGSON_REG(LOONGSON_REGBASE + 0x68)
 #define LOONGSON_PXARB_STATUS		LOONGSON_REG(LOONGSON_REGBASE + 0x6c)
 
+/* Chip Config */
+#define LOONGSON_CHIPCFG0		LOONGSON_REG(LOONGSON_REGBASE + 0x80)
+
 /* pcimap */
 
 #define LOONGSON_PCIMAP_PCIMAP_LO0	0x0000003f
@@ -246,9 +267,6 @@ static inline void do_perfcnt_IRQ(void)
 #ifdef CONFIG_CPU_SUPPORTS_CPUFREQ
 #include <linux/cpufreq.h>
 extern struct cpufreq_frequency_table loongson2_clockmod_table[];
-
-/* Chip Config */
-#define LOONGSON_CHIPCFG0		LOONGSON_REG(LOONGSON_REGBASE + 0x80)
 #endif
 
 /*

arch/mips/include/asm/mach-loongson/machine.h

@@ -24,4 +24,10 @@
 
 #endif
 
+#ifdef CONFIG_LEMOTE_MACH3A
+
+#define LOONGSON_MACHTYPE MACH_LEMOTE_A1101
+
+#endif /* CONFIG_LEMOTE_MACH3A */
+
 #endif /* __ASM_MACH_LOONGSON_MACHINE_H */

arch/mips/include/asm/mach-loongson/pci.h

@@ -40,8 +40,13 @@ extern struct pci_ops loongson_pci_ops;
 #else	/* loongson2f/32bit & loongson2e */
 
 /* this pci memory space is mapped by pcimap in pci.c */
+#ifdef CONFIG_CPU_LOONGSON3
+#define LOONGSON_PCI_MEM_START	0x40000000UL
+#define LOONGSON_PCI_MEM_END	0x7effffffUL
+#else
 #define LOONGSON_PCI_MEM_START	LOONGSON_PCILO1_BASE
 #define LOONGSON_PCI_MEM_END	(LOONGSON_PCILO1_BASE + 0x04000000 * 2)
+#endif
 /* this is an offset from mips_io_port_base */
 #define LOONGSON_PCI_IO_START	0x00004000UL
 

arch/mips/include/asm/mach-loongson/spaces.h

@@ -0,0 +1,9 @@
+#ifndef __ASM_MACH_LOONGSON_SPACES_H_
+#define __ASM_MACH_LOONGSON_SPACES_H_
+
+#if defined(CONFIG_64BIT)
+#define CAC_BASE        _AC(0x9800000000000000, UL)
+#endif /* CONFIG_64BIT */
+
+#include <asm/mach-generic/spaces.h>
+#endif

arch/mips/include/asm/mach-malta/kernel-entry-init.h

@@ -5,10 +5,80 @@
  *
  * Chris Dearman (chris@mips.com)
  * Copyright (C) 2007 Mips Technologies, Inc.
+ * Copyright (C) 2014 Imagination Technologies Ltd.
  */
 #ifndef __ASM_MACH_MIPS_KERNEL_ENTRY_INIT_H
 #define __ASM_MACH_MIPS_KERNEL_ENTRY_INIT_H
 
+	/*
+	 * Prepare segments for EVA boot:
+	 *
+	 * This is in case the processor boots in legacy configuration
+	 * (SI_EVAReset is de-asserted and CONFIG5.K == 0)
+	 *
+	 * On entry, t1 is loaded with CP0_CONFIG
+	 *
+	 * ========================= Mappings =============================
+	 * Virtual memory           Physical memory           Mapping
+	 * 0x00000000 - 0x7fffffff  0x80000000 - 0xfffffffff   MUSUK (kuseg)
+	 *                          Flat 2GB physical memory
+	 *
+	 * 0x80000000 - 0x9fffffff  0x00000000 - 0x1ffffffff   MUSUK (kseg0)
+	 * 0xa0000000 - 0xbf000000  0x00000000 - 0x1ffffffff   MUSUK (kseg1)
+	 * 0xc0000000 - 0xdfffffff             -                 MK  (kseg2)
+	 * 0xe0000000 - 0xffffffff             -                 MK  (kseg3)
+	 *
+	 *
+	 * Lowmem is expanded to 2GB
+	 */
+	.macro	eva_entry
+	/*
+	 * Get Config.K0 value and use it to program
+	 * the segmentation registers
+	 */
+	andi	t1, 0x7 /* CCA */
+	move	t2, t1
+	ins	t2, t1, 16, 3
+	/* SegCtl0 */
+	li      t0, ((MIPS_SEGCFG_MK << MIPS_SEGCFG_AM_SHIFT) |		\
+		(0 << MIPS_SEGCFG_PA_SHIFT) |				\
+		(1 << MIPS_SEGCFG_EU_SHIFT)) |				\
+		(((MIPS_SEGCFG_MK << MIPS_SEGCFG_AM_SHIFT) |		\
+		(0 << MIPS_SEGCFG_PA_SHIFT) |				\
+		(1 << MIPS_SEGCFG_EU_SHIFT)) << 16)
+	or	t0, t2
+	mtc0	t0, $5, 2
+
+	/* SegCtl1 */
+	li      t0, ((MIPS_SEGCFG_MUSUK << MIPS_SEGCFG_AM_SHIFT) |	\
+		(0 << MIPS_SEGCFG_PA_SHIFT) |				\
+		(2 << MIPS_SEGCFG_C_SHIFT) |				\
+		(1 << MIPS_SEGCFG_EU_SHIFT)) |				\
+		(((MIPS_SEGCFG_MUSUK << MIPS_SEGCFG_AM_SHIFT) |		\
+		(0 << MIPS_SEGCFG_PA_SHIFT) |				\
+		(1 << MIPS_SEGCFG_EU_SHIFT)) << 16)
+	ins	t0, t1, 16, 3
+	mtc0	t0, $5, 3
+
+	/* SegCtl2 */
+	li	t0, ((MIPS_SEGCFG_MUSUK << MIPS_SEGCFG_AM_SHIFT) |	\
+		(6 << MIPS_SEGCFG_PA_SHIFT) |				\
+		(1 << MIPS_SEGCFG_EU_SHIFT)) |				\
+		(((MIPS_SEGCFG_MUSUK << MIPS_SEGCFG_AM_SHIFT) |		\
+		(4 << MIPS_SEGCFG_PA_SHIFT) |				\
+		(1 << MIPS_SEGCFG_EU_SHIFT)) << 16)
+	or	t0, t2
+	mtc0	t0, $5, 4
+
+	jal	mips_ihb
+	mfc0    t0, $16, 5
+	li      t2, 0x40000000      /* K bit */
+	or      t0, t0, t2
+	mtc0    t0, $16, 5
+	sync
+	jal	mips_ihb
+	.endm
+
 	.macro	kernel_entry_setup
 #ifdef CONFIG_MIPS_MT_SMTC
 	mfc0	t0, CP0_CONFIG
@@ -39,14 +109,57 @@
 nonmt_processor:
 	.asciz	"SMTC kernel requires the MT ASE to run\n"
 	__FINIT
-0:
 #endif
+
+#ifdef CONFIG_EVA
+	sync
+	ehb
+
+	mfc0    t1, CP0_CONFIG
+	bgez    t1, 9f
+	mfc0	t0, CP0_CONFIG, 1
+	bgez	t0, 9f
+	mfc0	t0, CP0_CONFIG, 2
+	bgez	t0, 9f
+	mfc0	t0, CP0_CONFIG, 3
+	sll     t0, t0, 6   /* SC bit */
+	bgez    t0, 9f
+
+	eva_entry
+	b       0f
+9:
+	/* Assume we came from YAMON... */
+	PTR_LA	v0, 0x9fc00534	/* YAMON print */
+	lw	v0, (v0)
+	move	a0, zero
+	PTR_LA  a1, nonsc_processor
+	jal	v0
+
+	PTR_LA	v0, 0x9fc00520	/* YAMON exit */
+	lw	v0, (v0)
+	li	a0, 1
+	jal	v0
+
+1:	b	1b
+	nop
+	__INITDATA
+nonsc_processor:
+	.asciz  "EVA kernel requires a MIPS core with Segment Control implemented\n"
+	__FINIT
+#endif /* CONFIG_EVA */
+0:
 	.endm
 
 /*
  * Do SMP slave processor setup necessary before we can safely execute C code.
  */
 	.macro	smp_slave_setup
+#ifdef CONFIG_EVA
+	sync
+	ehb
+	mfc0    t1, CP0_CONFIG
+	eva_entry
+#endif
 	.endm
 
 #endif /* __ASM_MACH_MIPS_KERNEL_ENTRY_INIT_H */

arch/mips/include/asm/mach-malta/spaces.h

@@ -0,0 +1,46 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2014 Imagination Technologies Ltd.
+ */
+
+#ifndef _ASM_MALTA_SPACES_H
+#define _ASM_MALTA_SPACES_H
+
+#ifdef CONFIG_EVA
+
+/*
+ * Traditional Malta Board Memory Map for EVA
+ *
+ * 0x00000000 - 0x0fffffff: 1st RAM region, 256MB
+ * 0x10000000 - 0x1bffffff: GIC and CPC Control Registers
+ * 0x1c000000 - 0x1fffffff: I/O And Flash
+ * 0x20000000 - 0x7fffffff: 2nd RAM region, 1.5GB
+ * 0x80000000 - 0xffffffff: Physical memory aliases to 0x0 (2GB)
+ *
+ * The kernel is still located in 0x80000000(kseg0). However,
+ * the physical mask has been shifted to 0x80000000 which exploits the alias
+ * on the Malta board. As a result of which, we override the __pa_symbol
+ * to peform direct mapping from virtual to physical addresses. In other
+ * words, the 0x80000000 virtual address maps to 0x80000000 physical address
+ * which in turn aliases to 0x0. We do this in order to be able to use a flat
+ * 2GB of memory (0x80000000 - 0xffffffff) so we can avoid the I/O hole in
+ * 0x10000000 - 0x1fffffff.
+ * The last 64KB of physical memory are reserved for correct HIGHMEM
+ * macros arithmetics.
+ *
+ */
+
+#define PAGE_OFFSET	_AC(0x0, UL)
+#define PHYS_OFFSET	_AC(0x80000000, UL)
+#define HIGHMEM_START	_AC(0xffff0000, UL)
+
+#define __pa_symbol(x)	(RELOC_HIDE((unsigned long)(x), 0))
+
+#endif /* CONFIG_EVA */
+
+#include <asm/mach-generic/spaces.h>
+
+#endif /* _ASM_MALTA_SPACES_H */

arch/mips/include/asm/mach-pmcs-msp71xx/msp_regops.h

@@ -76,7 +76,7 @@ static inline void set_value_reg32(volatile u32 *const addr,
 
 	__asm__ __volatile__(
 	"	.set	push				\n"
-	"	.set	mips3				\n"
+	"	.set	arch=r4000			\n"
 	"1:	ll	%0, %1	# set_value_reg32	\n"
 	"	and	%0, %2				\n"
 	"	or	%0, %3				\n"
@@ -98,7 +98,7 @@ static inline void set_reg32(volatile u32 *const addr,
 
 	__asm__ __volatile__(
 	"	.set	push				\n"
-	"	.set	mips3				\n"
+	"	.set	arch=r4000			\n"
 	"1:	ll	%0, %1		# set_reg32	\n"
 	"	or	%0, %2				\n"
 	"	sc	%0, %1				\n"
@@ -119,7 +119,7 @@ static inline void clear_reg32(volatile u32 *const addr,
 
 	__asm__ __volatile__(
 	"	.set	push				\n"
-	"	.set	mips3				\n"
+	"	.set	arch=r4000			\n"
 	"1:	ll	%0, %1		# clear_reg32	\n"
 	"	and	%0, %2				\n"
 	"	sc	%0, %1				\n"
@@ -140,7 +140,7 @@ static inline void toggle_reg32(volatile u32 *const addr,
 
 	__asm__ __volatile__(
 	"	.set	push				\n"
-	"	.set	mips3				\n"
+	"	.set	arch=r4000			\n"
 	"1:	ll	%0, %1		# toggle_reg32	\n"
 	"	xor	%0, %2				\n"
 	"	sc	%0, %1				\n"
@@ -216,7 +216,7 @@ static inline u32 blocking_read_reg32(volatile u32 *const addr)
 #define custom_read_reg32(address, tmp)				\
 	__asm__ __volatile__(					\
 	"	.set	push				\n"	\
-	"	.set	mips3				\n"	\
+	"	.set	arch=r4000			\n"	\
 	"1:	ll	%0, %1	#custom_read_reg32	\n"	\
 	"	.set	pop				\n"	\
 	: "=r" (tmp), "=m" (*address)				\
@@ -225,7 +225,7 @@ static inline u32 blocking_read_reg32(volatile u32 *const addr)
 #define custom_write_reg32(address, tmp)			\
 	__asm__ __volatile__(					\
 	"	.set	push				\n"	\
-	"	.set	mips3				\n"	\
+	"	.set	arch=r4000			\n"	\
 	"	sc	%0, %1	#custom_write_reg32	\n"	\
 	"	"__beqz"%0, 1b				\n"	\
 	"	nop					\n"	\

arch/mips/include/asm/mips-boards/malta.h

@@ -63,6 +63,11 @@ static inline unsigned long get_msc_port_base(unsigned long reg)
 #define GIC_BASE_ADDR			0x1bdc0000
 #define GIC_ADDRSPACE_SZ		(128 * 1024)
 
+/*
+ * CPC Specific definitions
+ */
+#define CPC_BASE_ADDR			0x1bde0000
+
 /*
  * MSC01 BIU Specific definitions
  * FIXME : These should be elsewhere ?

arch/mips/include/asm/mips-boards/piix4.h

@@ -50,4 +50,9 @@
 #define PIIX4_FUNC1_IDETIM_SECONDARY_HI		0x43
 #define   PIIX4_FUNC1_IDETIM_SECONDARY_HI_IDE_DECODE_EN	(1 << 7)
 
+/* Power Management Configuration Space */
+#define PIIX4_FUNC3_PMBA			0x40
+#define PIIX4_FUNC3_PMREGMISC			0x80
+#define   PIIX4_FUNC3_PMREGMISC_EN			(1 << 0)
+
 #endif /* __ASM_MIPS_BOARDS_PIIX4_H */

arch/mips/include/asm/mips-cm.h

@@ -0,0 +1,322 @@
+/*
+ * Copyright (C) 2013 Imagination Technologies
+ * Author: Paul Burton <paul.burton@imgtec.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __MIPS_ASM_MIPS_CM_H__
+#define __MIPS_ASM_MIPS_CM_H__
+
+#include <linux/io.h>
+#include <linux/types.h>
+
+/* The base address of the CM GCR block */
+extern void __iomem *mips_cm_base;
+
+/* The base address of the CM L2-only sync region */
+extern void __iomem *mips_cm_l2sync_base;
+
+/**
+ * __mips_cm_phys_base - retrieve the physical base address of the CM
+ *
+ * This function returns the physical base address of the Coherence Manager
+ * global control block, or 0 if no Coherence Manager is present. It provides
+ * a default implementation which reads the CMGCRBase register where available,
+ * and may be overriden by platforms which determine this address in a
+ * different way by defining a function with the same prototype except for the
+ * name mips_cm_phys_base (without underscores).
+ */
+extern phys_t __mips_cm_phys_base(void);
+
+/**
+ * mips_cm_probe - probe for a Coherence Manager
+ *
+ * Attempt to detect the presence of a Coherence Manager. Returns 0 if a CM
+ * is successfully detected, else -errno.
+ */
+#ifdef CONFIG_MIPS_CM
+extern int mips_cm_probe(void);
+#else
+static inline int mips_cm_probe(void)
+{
+	return -ENODEV;
+}
+#endif
+
+/**
+ * mips_cm_present - determine whether a Coherence Manager is present
+ *
+ * Returns true if a CM is present in the system, else false.
+ */
+static inline bool mips_cm_present(void)
+{
+#ifdef CONFIG_MIPS_CM
+	return mips_cm_base != NULL;
+#else
+	return false;
+#endif
+}
+
+/**
+ * mips_cm_has_l2sync - determine whether an L2-only sync region is present
+ *
+ * Returns true if the system implements an L2-only sync region, else false.
+ */
+static inline bool mips_cm_has_l2sync(void)
+{
+#ifdef CONFIG_MIPS_CM
+	return mips_cm_l2sync_base != NULL;
+#else
+	return false;
+#endif
+}
+
+/* Offsets to register blocks from the CM base address */
+#define MIPS_CM_GCB_OFS		0x0000 /* Global Control Block */
+#define MIPS_CM_CLCB_OFS	0x2000 /* Core Local Control Block */
+#define MIPS_CM_COCB_OFS	0x4000 /* Core Other Control Block */
+#define MIPS_CM_GDB_OFS		0x6000 /* Global Debug Block */
+
+/* Total size of the CM memory mapped registers */
+#define MIPS_CM_GCR_SIZE	0x8000
+
+/* Size of the L2-only sync region */
+#define MIPS_CM_L2SYNC_SIZE	0x1000
+
+/* Macros to ease the creation of register access functions */
+#define BUILD_CM_R_(name, off)					\
+static inline u32 *addr_gcr_##name(void)			\
+{								\
+	return (u32 *)(mips_cm_base + (off));			\
+}								\
+								\
+static inline u32 read_gcr_##name(void)				\
+{								\
+	return __raw_readl(addr_gcr_##name());			\
+}
+
+#define BUILD_CM__W(name, off)					\
+static inline void write_gcr_##name(u32 value)			\
+{								\
+	__raw_writel(value, addr_gcr_##name());			\
+}
+
+#define BUILD_CM_RW(name, off)					\
+	BUILD_CM_R_(name, off)					\
+	BUILD_CM__W(name, off)
+
+#define BUILD_CM_Cx_R_(name, off)				\
+	BUILD_CM_R_(cl_##name, MIPS_CM_CLCB_OFS + (off))	\
+	BUILD_CM_R_(co_##name, MIPS_CM_COCB_OFS + (off))
+
+#define BUILD_CM_Cx__W(name, off)				\
+	BUILD_CM__W(cl_##name, MIPS_CM_CLCB_OFS + (off))	\
+	BUILD_CM__W(co_##name, MIPS_CM_COCB_OFS + (off))
+
+#define BUILD_CM_Cx_RW(name, off)				\
+	BUILD_CM_Cx_R_(name, off)				\
+	BUILD_CM_Cx__W(name, off)
+
+/* GCB register accessor functions */
+BUILD_CM_R_(config,		MIPS_CM_GCB_OFS + 0x00)
+BUILD_CM_RW(base,		MIPS_CM_GCB_OFS + 0x08)
+BUILD_CM_RW(access,		MIPS_CM_GCB_OFS + 0x20)
+BUILD_CM_R_(rev,		MIPS_CM_GCB_OFS + 0x30)
+BUILD_CM_RW(error_mask,		MIPS_CM_GCB_OFS + 0x40)
+BUILD_CM_RW(error_cause,	MIPS_CM_GCB_OFS + 0x48)
+BUILD_CM_RW(error_addr,		MIPS_CM_GCB_OFS + 0x50)
+BUILD_CM_RW(error_mult,		MIPS_CM_GCB_OFS + 0x58)
+BUILD_CM_RW(l2_only_sync_base,	MIPS_CM_GCB_OFS + 0x70)
+BUILD_CM_RW(gic_base,		MIPS_CM_GCB_OFS + 0x80)
+BUILD_CM_RW(cpc_base,		MIPS_CM_GCB_OFS + 0x88)
+BUILD_CM_RW(reg0_base,		MIPS_CM_GCB_OFS + 0x90)
+BUILD_CM_RW(reg0_mask,		MIPS_CM_GCB_OFS + 0x98)
+BUILD_CM_RW(reg1_base,		MIPS_CM_GCB_OFS + 0xa0)
+BUILD_CM_RW(reg1_mask,		MIPS_CM_GCB_OFS + 0xa8)
+BUILD_CM_RW(reg2_base,		MIPS_CM_GCB_OFS + 0xb0)
+BUILD_CM_RW(reg2_mask,		MIPS_CM_GCB_OFS + 0xb8)
+BUILD_CM_RW(reg3_base,		MIPS_CM_GCB_OFS + 0xc0)
+BUILD_CM_RW(reg3_mask,		MIPS_CM_GCB_OFS + 0xc8)
+BUILD_CM_R_(gic_status,		MIPS_CM_GCB_OFS + 0xd0)
+BUILD_CM_R_(cpc_status,		MIPS_CM_GCB_OFS + 0xf0)
+
+/* Core Local & Core Other register accessor functions */
+BUILD_CM_Cx_RW(reset_release,	0x00)
+BUILD_CM_Cx_RW(coherence,	0x08)
+BUILD_CM_Cx_R_(config,		0x10)
+BUILD_CM_Cx_RW(other,		0x18)
+BUILD_CM_Cx_RW(reset_base,	0x20)
+BUILD_CM_Cx_R_(id,		0x28)
+BUILD_CM_Cx_RW(reset_ext_base,	0x30)
+BUILD_CM_Cx_R_(tcid_0_priority,	0x40)
+BUILD_CM_Cx_R_(tcid_1_priority,	0x48)
+BUILD_CM_Cx_R_(tcid_2_priority,	0x50)
+BUILD_CM_Cx_R_(tcid_3_priority,	0x58)
+BUILD_CM_Cx_R_(tcid_4_priority,	0x60)
+BUILD_CM_Cx_R_(tcid_5_priority,	0x68)
+BUILD_CM_Cx_R_(tcid_6_priority,	0x70)
+BUILD_CM_Cx_R_(tcid_7_priority,	0x78)
+BUILD_CM_Cx_R_(tcid_8_priority,	0x80)
+
+/* GCR_CONFIG register fields */
+#define CM_GCR_CONFIG_NUMIOCU_SHF		8
+#define CM_GCR_CONFIG_NUMIOCU_MSK		(_ULCAST_(0xf) << 8)
+#define CM_GCR_CONFIG_PCORES_SHF		0
+#define CM_GCR_CONFIG_PCORES_MSK		(_ULCAST_(0xff) << 0)
+
+/* GCR_BASE register fields */
+#define CM_GCR_BASE_GCRBASE_SHF			15
+#define CM_GCR_BASE_GCRBASE_MSK			(_ULCAST_(0x1ffff) << 15)
+#define CM_GCR_BASE_CMDEFTGT_SHF		0
+#define CM_GCR_BASE_CMDEFTGT_MSK		(_ULCAST_(0x3) << 0)
+#define  CM_GCR_BASE_CMDEFTGT_DISABLED		0
+#define  CM_GCR_BASE_CMDEFTGT_MEM		1
+#define  CM_GCR_BASE_CMDEFTGT_IOCU0		2
+#define  CM_GCR_BASE_CMDEFTGT_IOCU1		3
+
+/* GCR_ACCESS register fields */
+#define CM_GCR_ACCESS_ACCESSEN_SHF		0
+#define CM_GCR_ACCESS_ACCESSEN_MSK		(_ULCAST_(0xff) << 0)
+
+/* GCR_REV register fields */
+#define CM_GCR_REV_MAJOR_SHF			8
+#define CM_GCR_REV_MAJOR_MSK			(_ULCAST_(0xff) << 8)
+#define CM_GCR_REV_MINOR_SHF			0
+#define CM_GCR_REV_MINOR_MSK			(_ULCAST_(0xff) << 0)
+
+/* GCR_ERROR_CAUSE register fields */
+#define CM_GCR_ERROR_CAUSE_ERRTYPE_SHF		27
+#define CM_GCR_ERROR_CAUSE_ERRTYPE_MSK		(_ULCAST_(0x1f) << 27)
+#define CM_GCR_ERROR_CAUSE_ERRINFO_SHF		0
+#define CM_GCR_ERROR_CAUSE_ERRINGO_MSK		(_ULCAST_(0x7ffffff) << 0)
+
+/* GCR_ERROR_MULT register fields */
+#define CM_GCR_ERROR_MULT_ERR2ND_SHF		0
+#define CM_GCR_ERROR_MULT_ERR2ND_MSK		(_ULCAST_(0x1f) << 0)
+
+/* GCR_L2_ONLY_SYNC_BASE register fields */
+#define CM_GCR_L2_ONLY_SYNC_BASE_SYNCBASE_SHF	12
+#define CM_GCR_L2_ONLY_SYNC_BASE_SYNCBASE_MSK	(_ULCAST_(0xfffff) << 12)
+#define CM_GCR_L2_ONLY_SYNC_BASE_SYNCEN_SHF	0
+#define CM_GCR_L2_ONLY_SYNC_BASE_SYNCEN_MSK	(_ULCAST_(0x1) << 0)
+
+/* GCR_GIC_BASE register fields */
+#define CM_GCR_GIC_BASE_GICBASE_SHF		17
+#define CM_GCR_GIC_BASE_GICBASE_MSK		(_ULCAST_(0x7fff) << 17)
+#define CM_GCR_GIC_BASE_GICEN_SHF		0
+#define CM_GCR_GIC_BASE_GICEN_MSK		(_ULCAST_(0x1) << 0)
+
+/* GCR_CPC_BASE register fields */
+#define CM_GCR_CPC_BASE_CPCBASE_SHF		17
+#define CM_GCR_CPC_BASE_CPCBASE_MSK		(_ULCAST_(0x7fff) << 17)
+#define CM_GCR_CPC_BASE_CPCEN_SHF		0
+#define CM_GCR_CPC_BASE_CPCEN_MSK		(_ULCAST_(0x1) << 0)
+
+/* GCR_REGn_BASE register fields */
+#define CM_GCR_REGn_BASE_BASEADDR_SHF		16
+#define CM_GCR_REGn_BASE_BASEADDR_MSK		(_ULCAST_(0xffff) << 16)
+
+/* GCR_REGn_MASK register fields */
+#define CM_GCR_REGn_MASK_ADDRMASK_SHF		16
+#define CM_GCR_REGn_MASK_ADDRMASK_MSK		(_ULCAST_(0xffff) << 16)
+#define CM_GCR_REGn_MASK_CCAOVR_SHF		5
+#define CM_GCR_REGn_MASK_CCAOVR_MSK		(_ULCAST_(0x3) << 5)
+#define CM_GCR_REGn_MASK_CCAOVREN_SHF		4
+#define CM_GCR_REGn_MASK_CCAOVREN_MSK		(_ULCAST_(0x1) << 4)
+#define CM_GCR_REGn_MASK_DROPL2_SHF		2
+#define CM_GCR_REGn_MASK_DROPL2_MSK		(_ULCAST_(0x1) << 2)
+#define CM_GCR_REGn_MASK_CMTGT_SHF		0
+#define CM_GCR_REGn_MASK_CMTGT_MSK		(_ULCAST_(0x3) << 0)
+#define  CM_GCR_REGn_MASK_CMTGT_DISABLED	(_ULCAST_(0x0) << 0)
+#define  CM_GCR_REGn_MASK_CMTGT_MEM		(_ULCAST_(0x1) << 0)
+#define  CM_GCR_REGn_MASK_CMTGT_IOCU0		(_ULCAST_(0x2) << 0)
+#define  CM_GCR_REGn_MASK_CMTGT_IOCU1		(_ULCAST_(0x3) << 0)
+
+/* GCR_GIC_STATUS register fields */
+#define CM_GCR_GIC_STATUS_EX_SHF		0
+#define CM_GCR_GIC_STATUS_EX_MSK		(_ULCAST_(0x1) << 0)
+
+/* GCR_CPC_STATUS register fields */
+#define CM_GCR_CPC_STATUS_EX_SHF		0
+#define CM_GCR_CPC_STATUS_EX_MSK		(_ULCAST_(0x1) << 0)
+
+/* GCR_Cx_COHERENCE register fields */
+#define CM_GCR_Cx_COHERENCE_COHDOMAINEN_SHF	0
+#define CM_GCR_Cx_COHERENCE_COHDOMAINEN_MSK	(_ULCAST_(0xff) << 0)
+
+/* GCR_Cx_CONFIG register fields */
+#define CM_GCR_Cx_CONFIG_IOCUTYPE_SHF		10
+#define CM_GCR_Cx_CONFIG_IOCUTYPE_MSK		(_ULCAST_(0x3) << 10)
+#define CM_GCR_Cx_CONFIG_PVPE_SHF		0
+#define CM_GCR_Cx_CONFIG_PVPE_MSK		(_ULCAST_(0x1ff) << 0)
+
+/* GCR_Cx_OTHER register fields */
+#define CM_GCR_Cx_OTHER_CORENUM_SHF		16
+#define CM_GCR_Cx_OTHER_CORENUM_MSK		(_ULCAST_(0xffff) << 16)
+
+/* GCR_Cx_RESET_BASE register fields */
+#define CM_GCR_Cx_RESET_BASE_BEVEXCBASE_SHF	12
+#define CM_GCR_Cx_RESET_BASE_BEVEXCBASE_MSK	(_ULCAST_(0xfffff) << 12)
+
+/* GCR_Cx_RESET_EXT_BASE register fields */
+#define CM_GCR_Cx_RESET_EXT_BASE_EVARESET_SHF	31
+#define CM_GCR_Cx_RESET_EXT_BASE_EVARESET_MSK	(_ULCAST_(0x1) << 31)
+#define CM_GCR_Cx_RESET_EXT_BASE_UEB_SHF	30
+#define CM_GCR_Cx_RESET_EXT_BASE_UEB_MSK	(_ULCAST_(0x1) << 30)
+#define CM_GCR_Cx_RESET_EXT_BASE_BEVEXCMASK_SHF	20
+#define CM_GCR_Cx_RESET_EXT_BASE_BEVEXCMASK_MSK	(_ULCAST_(0xff) << 20)
+#define CM_GCR_Cx_RESET_EXT_BASE_BEVEXCPA_SHF	1
+#define CM_GCR_Cx_RESET_EXT_BASE_BEVEXCPA_MSK	(_ULCAST_(0x7f) << 1)
+#define CM_GCR_Cx_RESET_EXT_BASE_PRESENT_SHF	0
+#define CM_GCR_Cx_RESET_EXT_BASE_PRESENT_MSK	(_ULCAST_(0x1) << 0)
+
+/**
+ * mips_cm_numcores - return the number of cores present in the system
+ *
+ * Returns the value of the PCORES field of the GCR_CONFIG register plus 1, or
+ * zero if no Coherence Manager is present.
+ */
+static inline unsigned mips_cm_numcores(void)
+{
+	if (!mips_cm_present())
+		return 0;
+
+	return ((read_gcr_config() & CM_GCR_CONFIG_PCORES_MSK)
+		>> CM_GCR_CONFIG_PCORES_SHF) + 1;
+}
+
+/**
+ * mips_cm_numiocu - return the number of IOCUs present in the system
+ *
+ * Returns the value of the NUMIOCU field of the GCR_CONFIG register, or zero
+ * if no Coherence Manager is present.
+ */
+static inline unsigned mips_cm_numiocu(void)
+{
+	if (!mips_cm_present())
+		return 0;
+
+	return (read_gcr_config() & CM_GCR_CONFIG_NUMIOCU_MSK)
+		>> CM_GCR_CONFIG_NUMIOCU_SHF;
+}
+
+/**
+ * mips_cm_l2sync - perform an L2-only sync operation
+ *
+ * If an L2-only sync region is present in the system then this function
+ * performs and L2-only sync and returns zero. Otherwise it returns -ENODEV.
+ */
+static inline int mips_cm_l2sync(void)
+{
+	if (!mips_cm_has_l2sync())
+		return -ENODEV;
+
+	writel(0, mips_cm_l2sync_base);
+	return 0;
+}
+
+#endif /* __MIPS_ASM_MIPS_CM_H__ */

arch/mips/include/asm/mips-cpc.h

@@ -0,0 +1,150 @@
+/*
+ * Copyright (C) 2013 Imagination Technologies
+ * Author: Paul Burton <paul.burton@imgtec.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __MIPS_ASM_MIPS_CPC_H__
+#define __MIPS_ASM_MIPS_CPC_H__
+
+#include <linux/io.h>
+#include <linux/types.h>
+
+/* The base address of the CPC registers */
+extern void __iomem *mips_cpc_base;
+
+/**
+ * mips_cpc_default_phys_base - retrieve the default physical base address of
+ *                              the CPC
+ *
+ * Returns the default physical base address of the Cluster Power Controller
+ * memory mapped registers. This is platform dependant & must therefore be
+ * implemented per-platform.
+ */
+extern phys_t mips_cpc_default_phys_base(void);
+
+/**
+ * mips_cpc_phys_base - retrieve the physical base address of the CPC
+ *
+ * This function returns the physical base address of the Cluster Power
+ * Controller memory mapped registers, or 0 if no Cluster Power Controller
+ * is present. It may be overriden by individual platforms which determine
+ * this address in a different way.
+ */
+extern phys_t __weak mips_cpc_phys_base(void);
+
+/**
+ * mips_cpc_probe - probe for a Cluster Power Controller
+ *
+ * Attempt to detect the presence of a Cluster Power Controller. Returns 0 if
+ * a CPC is successfully detected, else -errno.
+ */
+#ifdef CONFIG_MIPS_CPC
+extern int mips_cpc_probe(void);
+#else
+static inline int mips_cpc_probe(void)
+{
+	return -ENODEV;
+}
+#endif
+
+/**
+ * mips_cpc_present - determine whether a Cluster Power Controller is present
+ *
+ * Returns true if a CPC is present in the system, else false.
+ */
+static inline bool mips_cpc_present(void)
+{
+#ifdef CONFIG_MIPS_CPC
+	return mips_cpc_base != NULL;
+#else
+	return false;
+#endif
+}
+
+/* Offsets from the CPC base address to various control blocks */
+#define MIPS_CPC_GCB_OFS	0x0000
+#define MIPS_CPC_CLCB_OFS	0x2000
+#define MIPS_CPC_COCB_OFS	0x4000
+
+/* Macros to ease the creation of register access functions */
+#define BUILD_CPC_R_(name, off) \
+static inline u32 read_cpc_##name(void)				\
+{								\
+	return __raw_readl(mips_cpc_base + (off));		\
+}
+
+#define BUILD_CPC__W(name, off) \
+static inline void write_cpc_##name(u32 value)			\
+{								\
+	__raw_writel(value, mips_cpc_base + (off));		\
+}
+
+#define BUILD_CPC_RW(name, off)					\
+	BUILD_CPC_R_(name, off)					\
+	BUILD_CPC__W(name, off)
+
+#define BUILD_CPC_Cx_R_(name, off)				\
+	BUILD_CPC_R_(cl_##name, MIPS_CPC_CLCB_OFS + (off))	\
+	BUILD_CPC_R_(co_##name, MIPS_CPC_COCB_OFS + (off))
+
+#define BUILD_CPC_Cx__W(name, off)				\
+	BUILD_CPC__W(cl_##name, MIPS_CPC_CLCB_OFS + (off))	\
+	BUILD_CPC__W(co_##name, MIPS_CPC_COCB_OFS + (off))
+
+#define BUILD_CPC_Cx_RW(name, off)				\
+	BUILD_CPC_Cx_R_(name, off)				\
+	BUILD_CPC_Cx__W(name, off)
+
+/* GCB register accessor functions */
+BUILD_CPC_RW(access,		MIPS_CPC_GCB_OFS + 0x00)
+BUILD_CPC_RW(seqdel,		MIPS_CPC_GCB_OFS + 0x08)
+BUILD_CPC_RW(rail,		MIPS_CPC_GCB_OFS + 0x10)
+BUILD_CPC_RW(resetlen,		MIPS_CPC_GCB_OFS + 0x18)
+BUILD_CPC_R_(revision,		MIPS_CPC_GCB_OFS + 0x20)
+
+/* Core Local & Core Other accessor functions */
+BUILD_CPC_Cx_RW(cmd,		0x00)
+BUILD_CPC_Cx_RW(stat_conf,	0x08)
+BUILD_CPC_Cx_RW(other,		0x10)
+
+/* CPC_Cx_CMD register fields */
+#define CPC_Cx_CMD_SHF				0
+#define CPC_Cx_CMD_MSK				(_ULCAST_(0xf) << 0)
+#define  CPC_Cx_CMD_CLOCKOFF			(_ULCAST_(0x1) << 0)
+#define  CPC_Cx_CMD_PWRDOWN			(_ULCAST_(0x2) << 0)
+#define  CPC_Cx_CMD_PWRUP			(_ULCAST_(0x3) << 0)
+#define  CPC_Cx_CMD_RESET			(_ULCAST_(0x4) << 0)
+
+/* CPC_Cx_STAT_CONF register fields */
+#define CPC_Cx_STAT_CONF_PWRUPE_SHF		23
+#define CPC_Cx_STAT_CONF_PWRUPE_MSK		(_ULCAST_(0x1) << 23)
+#define CPC_Cx_STAT_CONF_SEQSTATE_SHF		19
+#define CPC_Cx_STAT_CONF_SEQSTATE_MSK		(_ULCAST_(0xf) << 19)
+#define  CPC_Cx_STAT_CONF_SEQSTATE_D0		(_ULCAST_(0x0) << 19)
+#define  CPC_Cx_STAT_CONF_SEQSTATE_U0		(_ULCAST_(0x1) << 19)
+#define  CPC_Cx_STAT_CONF_SEQSTATE_U1		(_ULCAST_(0x2) << 19)
+#define  CPC_Cx_STAT_CONF_SEQSTATE_U2		(_ULCAST_(0x3) << 19)
+#define  CPC_Cx_STAT_CONF_SEQSTATE_U3		(_ULCAST_(0x4) << 19)
+#define  CPC_Cx_STAT_CONF_SEQSTATE_U4		(_ULCAST_(0x5) << 19)
+#define  CPC_Cx_STAT_CONF_SEQSTATE_U5		(_ULCAST_(0x6) << 19)
+#define  CPC_Cx_STAT_CONF_SEQSTATE_U6		(_ULCAST_(0x7) << 19)
+#define  CPC_Cx_STAT_CONF_SEQSTATE_D1		(_ULCAST_(0x8) << 19)
+#define  CPC_Cx_STAT_CONF_SEQSTATE_D3		(_ULCAST_(0x9) << 19)
+#define  CPC_Cx_STAT_CONF_SEQSTATE_D2		(_ULCAST_(0xa) << 19)
+#define CPC_Cx_STAT_CONF_CLKGAT_IMPL_SHF	17
+#define CPC_Cx_STAT_CONF_CLKGAT_IMPL_MSK	(_ULCAST_(0x1) << 17)
+#define CPC_Cx_STAT_CONF_PWRDN_IMPL_SHF		16
+#define CPC_Cx_STAT_CONF_PWRDN_IMPL_MSK		(_ULCAST_(0x1) << 16)
+#define CPC_Cx_STAT_CONF_EJTAG_PROBE_SHF	15
+#define CPC_Cx_STAT_CONF_EJTAG_PROBE_MSK	(_ULCAST_(0x1) << 15)
+
+/* CPC_Cx_OTHER register fields */
+#define CPC_Cx_OTHER_CORENUM_SHF		16
+#define CPC_Cx_OTHER_CORENUM_MSK		(_ULCAST_(0xff) << 16)
+
+#endif /* __MIPS_ASM_MIPS_CPC_H__ */

arch/mips/include/asm/mips_mt.h

@@ -18,7 +18,12 @@ extern cpumask_t mt_fpu_cpumask;
 extern unsigned long mt_fpemul_threshold;
 
 extern void mips_mt_regdump(unsigned long previous_mvpcontrol_value);
+
+#ifdef CONFIG_MIPS_MT
 extern void mips_mt_set_cpuoptions(void);
+#else
+static inline void mips_mt_set_cpuoptions(void) { }
+#endif
 
 struct class;
 extern struct class *mt_class;

arch/mips/include/asm/mipsmtregs.h

@@ -176,6 +176,17 @@
 
 #ifndef __ASSEMBLY__
 
+static inline unsigned core_nvpes(void)
+{
+	unsigned conf0;
+
+	if (!cpu_has_mipsmt)
+		return 1;
+
+	conf0 = read_c0_mvpconf0();
+	return ((conf0 & MVPCONF0_PVPE) >> MVPCONF0_PVPE_SHIFT) + 1;
+}
+
 static inline unsigned int dvpe(void)
 {
 	int res = 0;

arch/mips/include/asm/mipsregs.h

@@ -568,11 +568,23 @@
 #define MIPS_CONF1_PC		(_ULCAST_(1) <<	 4)
 #define MIPS_CONF1_MD		(_ULCAST_(1) <<	 5)
 #define MIPS_CONF1_C2		(_ULCAST_(1) <<	 6)
+#define MIPS_CONF1_DA_SHF	7
+#define MIPS_CONF1_DA_SZ	3
 #define MIPS_CONF1_DA		(_ULCAST_(7) <<	 7)
+#define MIPS_CONF1_DL_SHF	10
+#define MIPS_CONF1_DL_SZ	3
 #define MIPS_CONF1_DL		(_ULCAST_(7) << 10)
+#define MIPS_CONF1_DS_SHF	13
+#define MIPS_CONF1_DS_SZ	3
 #define MIPS_CONF1_DS		(_ULCAST_(7) << 13)
+#define MIPS_CONF1_IA_SHF	16
+#define MIPS_CONF1_IA_SZ	3
 #define MIPS_CONF1_IA		(_ULCAST_(7) << 16)
+#define MIPS_CONF1_IL_SHF	19
+#define MIPS_CONF1_IL_SZ	3
 #define MIPS_CONF1_IL		(_ULCAST_(7) << 19)
+#define MIPS_CONF1_IS_SHF	22
+#define MIPS_CONF1_IS_SZ	3
 #define MIPS_CONF1_IS		(_ULCAST_(7) << 22)
 #define MIPS_CONF1_TLBS_SHIFT   (25)
 #define MIPS_CONF1_TLBS_SIZE    (6)
@@ -653,9 +665,16 @@
 
 #define MIPS_CONF7_RPS		(_ULCAST_(1) << 2)
 
+#define MIPS_CONF7_IAR		(_ULCAST_(1) << 10)
+#define MIPS_CONF7_AR		(_ULCAST_(1) << 16)
+
 /*  EntryHI bit definition */
 #define MIPS_ENTRYHI_EHINV	(_ULCAST_(1) << 10)
 
+/* CMGCRBase bit definitions */
+#define MIPS_CMGCRB_BASE	11
+#define MIPS_CMGCRF_BASE	(~_ULCAST_((1 << MIPS_CMGCRB_BASE) - 1))
+
 /*
  * Bits in the MIPS32/64 coprocessor 1 (FPU) revision register.
  */
@@ -1010,6 +1029,8 @@ do {									\
 
 #define read_c0_prid()		__read_32bit_c0_register($15, 0)
 
+#define read_c0_cmgcrbase()	__read_ulong_c0_register($15, 3)
+
 #define read_c0_config()	__read_32bit_c0_register($16, 0)
 #define read_c0_config1()	__read_32bit_c0_register($16, 1)
 #define read_c0_config2()	__read_32bit_c0_register($16, 2)
@@ -1883,6 +1904,7 @@ change_c0_##name(unsigned int change, unsigned int newbits)	\
 __BUILD_SET_C0(status)
 __BUILD_SET_C0(cause)
 __BUILD_SET_C0(config)
+__BUILD_SET_C0(config5)
 __BUILD_SET_C0(intcontrol)
 __BUILD_SET_C0(intctl)
 __BUILD_SET_C0(srsmap)

arch/mips/include/asm/module.h

@@ -126,6 +126,8 @@ search_module_dbetables(unsigned long addr)
 #define MODULE_PROC_FAMILY "LOONGSON1 "
 #elif defined CONFIG_CPU_LOONGSON2
 #define MODULE_PROC_FAMILY "LOONGSON2 "
+#elif defined CONFIG_CPU_LOONGSON3
+#define MODULE_PROC_FAMILY "LOONGSON3 "
 #elif defined CONFIG_CPU_CAVIUM_OCTEON
 #define MODULE_PROC_FAMILY "OCTEON "
 #elif defined CONFIG_CPU_XLR

arch/mips/include/asm/msa.h

@@ -0,0 +1,203 @@
+/*
+ * Copyright (C) 2013 Imagination Technologies
+ * Author: Paul Burton <paul.burton@imgtec.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+#ifndef _ASM_MSA_H
+#define _ASM_MSA_H
+
+#include <asm/mipsregs.h>
+
+extern void _save_msa(struct task_struct *);
+extern void _restore_msa(struct task_struct *);
+
+static inline void enable_msa(void)
+{
+	if (cpu_has_msa) {
+		set_c0_config5(MIPS_CONF5_MSAEN);
+		enable_fpu_hazard();
+	}
+}
+
+static inline void disable_msa(void)
+{
+	if (cpu_has_msa) {
+		clear_c0_config5(MIPS_CONF5_MSAEN);
+		disable_fpu_hazard();
+	}
+}
+
+static inline int is_msa_enabled(void)
+{
+	if (!cpu_has_msa)
+		return 0;
+
+	return read_c0_config5() & MIPS_CONF5_MSAEN;
+}
+
+static inline int thread_msa_context_live(void)
+{
+	/*
+	 * Check cpu_has_msa only if it's a constant. This will allow the
+	 * compiler to optimise out code for CPUs without MSA without adding
+	 * an extra redundant check for CPUs with MSA.
+	 */
+	if (__builtin_constant_p(cpu_has_msa) && !cpu_has_msa)
+		return 0;
+
+	return test_thread_flag(TIF_MSA_CTX_LIVE);
+}
+
+static inline void save_msa(struct task_struct *t)
+{
+	if (cpu_has_msa)
+		_save_msa(t);
+}
+
+static inline void restore_msa(struct task_struct *t)
+{
+	if (cpu_has_msa)
+		_restore_msa(t);
+}
+
+#ifdef TOOLCHAIN_SUPPORTS_MSA
+
+#define __BUILD_MSA_CTL_REG(name, cs)				\
+static inline unsigned int read_msa_##name(void)		\
+{								\
+	unsigned int reg;					\
+	__asm__ __volatile__(					\
+	"	.set	push\n"					\
+	"	.set	msa\n"					\
+	"	cfcmsa	%0, $" #cs "\n"				\
+	"	.set	pop\n"					\
+	: "=r"(reg));						\
+	return reg;						\
+}								\
+								\
+static inline void write_msa_##name(unsigned int val)		\
+{								\
+	__asm__ __volatile__(					\
+	"	.set	push\n"					\
+	"	.set	msa\n"					\
+	"	cfcmsa	$" #cs ", %0\n"				\
+	"	.set	pop\n"					\
+	: : "r"(val));						\
+}
+
+#else /* !TOOLCHAIN_SUPPORTS_MSA */
+
+/*
+ * Define functions using .word for the c[ft]cmsa instructions in order to
+ * allow compilation with toolchains that do not support MSA. Once all
+ * toolchains in use support MSA these can be removed.
+ */
+
+#define __BUILD_MSA_CTL_REG(name, cs)				\
+static inline unsigned int read_msa_##name(void)		\
+{								\
+	unsigned int reg;					\
+	__asm__ __volatile__(					\
+	"	.set	push\n"					\
+	"	.set	noat\n"					\
+	"	.word	0x787e0059 | (" #cs " << 11)\n"		\
+	"	move	%0, $1\n"				\
+	"	.set	pop\n"					\
+	: "=r"(reg));						\
+	return reg;						\
+}								\
+								\
+static inline void write_msa_##name(unsigned int val)		\
+{								\
+	__asm__ __volatile__(					\
+	"	.set	push\n"					\
+	"	.set	noat\n"					\
+	"	move	$1, %0\n"				\
+	"	.word	0x783e0819 | (" #cs " << 6)\n"		\
+	"	.set	pop\n"					\
+	: : "r"(val));						\
+}
+
+#endif /* !TOOLCHAIN_SUPPORTS_MSA */
+
+#define MSA_IR		0
+#define MSA_CSR		1
+#define MSA_ACCESS	2
+#define MSA_SAVE	3
+#define MSA_MODIFY	4
+#define MSA_REQUEST	5
+#define MSA_MAP		6
+#define MSA_UNMAP	7
+
+__BUILD_MSA_CTL_REG(ir, 0)
+__BUILD_MSA_CTL_REG(csr, 1)
+__BUILD_MSA_CTL_REG(access, 2)
+__BUILD_MSA_CTL_REG(save, 3)
+__BUILD_MSA_CTL_REG(modify, 4)
+__BUILD_MSA_CTL_REG(request, 5)
+__BUILD_MSA_CTL_REG(map, 6)
+__BUILD_MSA_CTL_REG(unmap, 7)
+
+/* MSA Implementation Register (MSAIR) */
+#define MSA_IR_REVB		0
+#define MSA_IR_REVF		(_ULCAST_(0xff) << MSA_IR_REVB)
+#define MSA_IR_PROCB		8
+#define MSA_IR_PROCF		(_ULCAST_(0xff) << MSA_IR_PROCB)
+#define MSA_IR_WRPB		16
+#define MSA_IR_WRPF		(_ULCAST_(0x1) << MSA_IR_WRPB)
+
+/* MSA Control & Status Register (MSACSR) */
+#define MSA_CSR_RMB		0
+#define MSA_CSR_RMF		(_ULCAST_(0x3) << MSA_CSR_RMB)
+#define MSA_CSR_RM_NEAREST	0
+#define MSA_CSR_RM_TO_ZERO	1
+#define MSA_CSR_RM_TO_POS	2
+#define MSA_CSR_RM_TO_NEG	3
+#define MSA_CSR_FLAGSB		2
+#define MSA_CSR_FLAGSF		(_ULCAST_(0x1f) << MSA_CSR_FLAGSB)
+#define MSA_CSR_FLAGS_IB	2
+#define MSA_CSR_FLAGS_IF	(_ULCAST_(0x1) << MSA_CSR_FLAGS_IB)
+#define MSA_CSR_FLAGS_UB	3
+#define MSA_CSR_FLAGS_UF	(_ULCAST_(0x1) << MSA_CSR_FLAGS_UB)
+#define MSA_CSR_FLAGS_OB	4
+#define MSA_CSR_FLAGS_OF	(_ULCAST_(0x1) << MSA_CSR_FLAGS_OB)
+#define MSA_CSR_FLAGS_ZB	5
+#define MSA_CSR_FLAGS_ZF	(_ULCAST_(0x1) << MSA_CSR_FLAGS_ZB)
+#define MSA_CSR_FLAGS_VB	6
+#define MSA_CSR_FLAGS_VF	(_ULCAST_(0x1) << MSA_CSR_FLAGS_VB)
+#define MSA_CSR_ENABLESB	7
+#define MSA_CSR_ENABLESF	(_ULCAST_(0x1f) << MSA_CSR_ENABLESB)
+#define MSA_CSR_ENABLES_IB	7
+#define MSA_CSR_ENABLES_IF	(_ULCAST_(0x1) << MSA_CSR_ENABLES_IB)
+#define MSA_CSR_ENABLES_UB	8
+#define MSA_CSR_ENABLES_UF	(_ULCAST_(0x1) << MSA_CSR_ENABLES_UB)
+#define MSA_CSR_ENABLES_OB	9
+#define MSA_CSR_ENABLES_OF	(_ULCAST_(0x1) << MSA_CSR_ENABLES_OB)
+#define MSA_CSR_ENABLES_ZB	10
+#define MSA_CSR_ENABLES_ZF	(_ULCAST_(0x1) << MSA_CSR_ENABLES_ZB)
+#define MSA_CSR_ENABLES_VB	11
+#define MSA_CSR_ENABLES_VF	(_ULCAST_(0x1) << MSA_CSR_ENABLES_VB)
+#define MSA_CSR_CAUSEB		12
+#define MSA_CSR_CAUSEF		(_ULCAST_(0x3f) << MSA_CSR_CAUSEB)
+#define MSA_CSR_CAUSE_IB	12
+#define MSA_CSR_CAUSE_IF	(_ULCAST_(0x1) << MSA_CSR_CAUSE_IB)
+#define MSA_CSR_CAUSE_UB	13
+#define MSA_CSR_CAUSE_UF	(_ULCAST_(0x1) << MSA_CSR_CAUSE_UB)
+#define MSA_CSR_CAUSE_OB	14
+#define MSA_CSR_CAUSE_OF	(_ULCAST_(0x1) << MSA_CSR_CAUSE_OB)
+#define MSA_CSR_CAUSE_ZB	15
+#define MSA_CSR_CAUSE_ZF	(_ULCAST_(0x1) << MSA_CSR_CAUSE_ZB)
+#define MSA_CSR_CAUSE_VB	16
+#define MSA_CSR_CAUSE_VF	(_ULCAST_(0x1) << MSA_CSR_CAUSE_VB)
+#define MSA_CSR_CAUSE_EB	17
+#define MSA_CSR_CAUSE_EF	(_ULCAST_(0x1) << MSA_CSR_CAUSE_EB)
+#define MSA_CSR_NXB		18
+#define MSA_CSR_NXF		(_ULCAST_(0x1) << MSA_CSR_NXB)
+#define MSA_CSR_FSB		24
+#define MSA_CSR_FSF		(_ULCAST_(0x1) << MSA_CSR_FSB)
+
+#endif /* _ASM_MSA_H */

arch/mips/include/asm/page.h

@@ -190,7 +190,9 @@ typedef struct { unsigned long pgprot; } pgprot_t;
  * https://patchwork.linux-mips.org/patch/1541/
  */
 
+#ifndef __pa_symbol
 #define __pa_symbol(x)	__pa(RELOC_HIDE((unsigned long)(x), 0))
+#endif
 
 #define pfn_to_kaddr(pfn)	__va((pfn) << PAGE_SHIFT)
 

arch/mips/include/asm/pgtable-bits.h

@@ -235,6 +235,15 @@ static inline uint64_t pte_to_entrylo(unsigned long pte_val)
 #define _CACHE_CACHABLE_NONCOHERENT (5<<_CACHE_SHIFT)
 #define _CACHE_UNCACHED_ACCELERATED (7<<_CACHE_SHIFT)
 
+#elif defined(CONFIG_CPU_LOONGSON3)
+
+/* Using COHERENT flag for NONCOHERENT doesn't hurt. */
+
+#define _CACHE_UNCACHED             (2<<_CACHE_SHIFT)  /* LOONGSON       */
+#define _CACHE_CACHABLE_NONCOHERENT (3<<_CACHE_SHIFT)  /* LOONGSON       */
+#define _CACHE_CACHABLE_COHERENT    (3<<_CACHE_SHIFT)  /* LOONGSON-3     */
+#define _CACHE_UNCACHED_ACCELERATED (7<<_CACHE_SHIFT)  /* LOONGSON       */
+
 #else
 
 #define _CACHE_CACHABLE_NO_WA	    (0<<_CACHE_SHIFT)  /* R4600 only	  */

arch/mips/include/asm/processor.h

@@ -97,18 +97,48 @@ extern unsigned int vced_count, vcei_count;
 
 #define NUM_FPU_REGS	32
 
-typedef __u64 fpureg_t;
+#ifdef CONFIG_CPU_HAS_MSA
+# define FPU_REG_WIDTH	128
+#else
+# define FPU_REG_WIDTH	64
+#endif
+
+union fpureg {
+	__u32	val32[FPU_REG_WIDTH / 32];
+	__u64	val64[FPU_REG_WIDTH / 64];
+};
+
+#ifdef CONFIG_CPU_LITTLE_ENDIAN
+# define FPR_IDX(width, idx)	(idx)
+#else
+# define FPR_IDX(width, idx)	((FPU_REG_WIDTH / (width)) - 1 - (idx))
+#endif
+
+#define BUILD_FPR_ACCESS(width) \
+static inline u##width get_fpr##width(union fpureg *fpr, unsigned idx)	\
+{									\
+	return fpr->val##width[FPR_IDX(width, idx)];			\
+}									\
+									\
+static inline void set_fpr##width(union fpureg *fpr, unsigned idx,	\
+				  u##width val)				\
+{									\
+	fpr->val##width[FPR_IDX(width, idx)] = val;			\
+}
+
+BUILD_FPR_ACCESS(32)
+BUILD_FPR_ACCESS(64)
 
 /*
- * It would be nice to add some more fields for emulator statistics, but there
- * are a number of fixed offsets in offset.h and elsewhere that would have to
- * be recalculated by hand.  So the additional information will be private to
- * the FPU emulator for now.  See asm-mips/fpu_emulator.h.
+ * It would be nice to add some more fields for emulator statistics,
+ * the additional information is private to the FPU emulator for now.
+ * See arch/mips/include/asm/fpu_emulator.h.
  */
 
 struct mips_fpu_struct {
-	fpureg_t	fpr[NUM_FPU_REGS];
+	union fpureg	fpr[NUM_FPU_REGS];
 	unsigned int	fcr31;
+	unsigned int	msacsr;
 };
 
 #define NUM_DSP_REGS   6
@@ -284,8 +314,9 @@ struct thread_struct {
 	 * Saved FPU/FPU emulator stuff				\
 	 */							\
 	.fpu			= {				\
-		.fpr		= {0,},				\
+		.fpr		= {{{0,},},},			\
 		.fcr31		= 0,				\
+		.msacsr		= 0,				\
 	},							\
 	/*							\
 	 * FPU affinity state (null if not FPAFF)		\

arch/mips/include/asm/ptrace.h

@@ -82,7 +82,7 @@ static inline long regs_return_value(struct pt_regs *regs)
 #define instruction_pointer(regs) ((regs)->cp0_epc)
 #define profile_pc(regs) instruction_pointer(regs)
 
-extern asmlinkage void syscall_trace_enter(struct pt_regs *regs);
+extern asmlinkage long syscall_trace_enter(struct pt_regs *regs, long syscall);
 extern asmlinkage void syscall_trace_leave(struct pt_regs *regs);
 
 extern void die(const char *, struct pt_regs *) __noreturn;

arch/mips/include/asm/r4kcache.h

@@ -17,6 +17,7 @@
 #include <asm/cpu-features.h>
 #include <asm/cpu-type.h>
 #include <asm/mipsmtregs.h>
+#include <asm/uaccess.h> /* for segment_eq() */
 
 /*
  * This macro return a properly sign-extended address suitable as base address
@@ -35,7 +36,7 @@
 	__asm__ __volatile__(						\
 	"	.set	push					\n"	\
 	"	.set	noreorder				\n"	\
-	"	.set	mips3\n\t				\n"	\
+	"	.set	arch=r4000				\n"	\
 	"	cache	%0, %1					\n"	\
 	"	.set	pop					\n"	\
 	:								\
@@ -203,7 +204,7 @@ static inline void flush_scache_line(unsigned long addr)
 	__asm__ __volatile__(					\
 	"	.set	push			\n"		\
 	"	.set	noreorder		\n"		\
-	"	.set	mips3			\n"		\
+	"	.set	arch=r4000		\n"		\
 	"1:	cache	%0, (%1)		\n"		\
 	"2:	.set	pop			\n"		\
 	"	.section __ex_table,\"a\"	\n"		\
@@ -212,6 +213,20 @@ static inline void flush_scache_line(unsigned long addr)
 	:							\
 	: "i" (op), "r" (addr))
 
+#define protected_cachee_op(op,addr)				\
+	__asm__ __volatile__(					\
+	"	.set	push			\n"		\
+	"	.set	noreorder		\n"		\
+	"	.set	mips0			\n"		\
+	"	.set	eva			\n"		\
+	"1:	cachee	%0, (%1)		\n"		\
+	"2:	.set	pop			\n"		\
+	"	.section __ex_table,\"a\"	\n"		\
+	"	"STR(PTR)" 1b, 2b		\n"		\
+	"	.previous"					\
+	:							\
+	: "i" (op), "r" (addr))
+
 /*
  * The next two are for badland addresses like signal trampolines.
  */
@@ -223,7 +238,11 @@ static inline void protected_flush_icache_line(unsigned long addr)
 		break;
 
 	default:
+#ifdef CONFIG_EVA
+		protected_cachee_op(Hit_Invalidate_I, addr);
+#else
 		protected_cache_op(Hit_Invalidate_I, addr);
+#endif
 		break;
 	}
 }
@@ -356,6 +375,91 @@ static inline void invalidate_tcache_page(unsigned long addr)
 		: "r" (base),						\
 		  "i" (op));
 
+/*
+ * Perform the cache operation specified by op using a user mode virtual
+ * address while in kernel mode.
+ */
+#define cache16_unroll32_user(base,op)					\
+	__asm__ __volatile__(						\
+	"	.set push					\n"	\
+	"	.set noreorder					\n"	\
+	"	.set mips0					\n"	\
+	"	.set eva					\n"	\
+	"	cachee %1, 0x000(%0); cachee %1, 0x010(%0)	\n"	\
+	"	cachee %1, 0x020(%0); cachee %1, 0x030(%0)	\n"	\
+	"	cachee %1, 0x040(%0); cachee %1, 0x050(%0)	\n"	\
+	"	cachee %1, 0x060(%0); cachee %1, 0x070(%0)	\n"	\
+	"	cachee %1, 0x080(%0); cachee %1, 0x090(%0)	\n"	\
+	"	cachee %1, 0x0a0(%0); cachee %1, 0x0b0(%0)	\n"	\
+	"	cachee %1, 0x0c0(%0); cachee %1, 0x0d0(%0)	\n"	\
+	"	cachee %1, 0x0e0(%0); cachee %1, 0x0f0(%0)	\n"	\
+	"	cachee %1, 0x100(%0); cachee %1, 0x110(%0)	\n"	\
+	"	cachee %1, 0x120(%0); cachee %1, 0x130(%0)	\n"	\
+	"	cachee %1, 0x140(%0); cachee %1, 0x150(%0)	\n"	\
+	"	cachee %1, 0x160(%0); cachee %1, 0x170(%0)	\n"	\
+	"	cachee %1, 0x180(%0); cachee %1, 0x190(%0)	\n"	\
+	"	cachee %1, 0x1a0(%0); cachee %1, 0x1b0(%0)	\n"	\
+	"	cachee %1, 0x1c0(%0); cachee %1, 0x1d0(%0)	\n"	\
+	"	cachee %1, 0x1e0(%0); cachee %1, 0x1f0(%0)	\n"	\
+	"	.set pop					\n"	\
+		:							\
+		: "r" (base),						\
+		  "i" (op));
+
+#define cache32_unroll32_user(base, op)					\
+	__asm__ __volatile__(						\
+	"	.set push					\n"	\
+	"	.set noreorder					\n"	\
+	"	.set mips0					\n"	\
+	"	.set eva					\n"	\
+	"	cachee %1, 0x000(%0); cachee %1, 0x020(%0)	\n"	\
+	"	cachee %1, 0x040(%0); cachee %1, 0x060(%0)	\n"	\
+	"	cachee %1, 0x080(%0); cachee %1, 0x0a0(%0)	\n"	\
+	"	cachee %1, 0x0c0(%0); cachee %1, 0x0e0(%0)	\n"	\
+	"	cachee %1, 0x100(%0); cachee %1, 0x120(%0)	\n"	\
+	"	cachee %1, 0x140(%0); cachee %1, 0x160(%0)	\n"	\
+	"	cachee %1, 0x180(%0); cachee %1, 0x1a0(%0)	\n"	\
+	"	cachee %1, 0x1c0(%0); cachee %1, 0x1e0(%0)	\n"	\
+	"	cachee %1, 0x200(%0); cachee %1, 0x220(%0)	\n"	\
+	"	cachee %1, 0x240(%0); cachee %1, 0x260(%0)	\n"	\
+	"	cachee %1, 0x280(%0); cachee %1, 0x2a0(%0)	\n"	\
+	"	cachee %1, 0x2c0(%0); cachee %1, 0x2e0(%0)	\n"	\
+	"	cachee %1, 0x300(%0); cachee %1, 0x320(%0)	\n"	\
+	"	cachee %1, 0x340(%0); cachee %1, 0x360(%0)	\n"	\
+	"	cachee %1, 0x380(%0); cachee %1, 0x3a0(%0)	\n"	\
+	"	cachee %1, 0x3c0(%0); cachee %1, 0x3e0(%0)	\n"	\
+	"	.set pop					\n"	\
+		:							\
+		: "r" (base),						\
+		  "i" (op));
+
+#define cache64_unroll32_user(base, op)					\
+	__asm__ __volatile__(						\
+	"	.set push					\n"	\
+	"	.set noreorder					\n"	\
+	"	.set mips0					\n"	\
+	"	.set eva					\n"	\
+	"	cachee %1, 0x000(%0); cachee %1, 0x040(%0)	\n"	\
+	"	cachee %1, 0x080(%0); cachee %1, 0x0c0(%0)	\n"	\
+	"	cachee %1, 0x100(%0); cachee %1, 0x140(%0)	\n"	\
+	"	cachee %1, 0x180(%0); cachee %1, 0x1c0(%0)	\n"	\
+	"	cachee %1, 0x200(%0); cachee %1, 0x240(%0)	\n"	\
+	"	cachee %1, 0x280(%0); cachee %1, 0x2c0(%0)	\n"	\
+	"	cachee %1, 0x300(%0); cachee %1, 0x340(%0)	\n"	\
+	"	cachee %1, 0x380(%0); cachee %1, 0x3c0(%0)	\n"	\
+	"	cachee %1, 0x400(%0); cachee %1, 0x440(%0)	\n"	\
+	"	cachee %1, 0x480(%0); cachee %1, 0x4c0(%0)	\n"	\
+	"	cachee %1, 0x500(%0); cachee %1, 0x540(%0)	\n"	\
+	"	cachee %1, 0x580(%0); cachee %1, 0x5c0(%0)	\n"	\
+	"	cachee %1, 0x600(%0); cachee %1, 0x640(%0)	\n"	\
+	"	cachee %1, 0x680(%0); cachee %1, 0x6c0(%0)	\n"	\
+	"	cachee %1, 0x700(%0); cachee %1, 0x740(%0)	\n"	\
+	"	cachee %1, 0x780(%0); cachee %1, 0x7c0(%0)	\n"	\
+	"	.set pop					\n"	\
+		:							\
+		: "r" (base),						\
+		  "i" (op));
+
 /* build blast_xxx, blast_xxx_page, blast_xxx_page_indexed */
 #define __BUILD_BLAST_CACHE(pfx, desc, indexop, hitop, lsize, extra)	\
 static inline void extra##blast_##pfx##cache##lsize(void)		\
@@ -429,6 +533,32 @@ __BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 32
 __BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 64, )
 __BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 128, )
 
+#define __BUILD_BLAST_USER_CACHE(pfx, desc, indexop, hitop, lsize) \
+static inline void blast_##pfx##cache##lsize##_user_page(unsigned long page) \
+{									\
+	unsigned long start = page;					\
+	unsigned long end = page + PAGE_SIZE;				\
+									\
+	__##pfx##flush_prologue						\
+									\
+	do {								\
+		cache##lsize##_unroll32_user(start, hitop);             \
+		start += lsize * 32;					\
+	} while (start < end);						\
+									\
+	__##pfx##flush_epilogue						\
+}
+
+__BUILD_BLAST_USER_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D,
+			 16)
+__BUILD_BLAST_USER_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 16)
+__BUILD_BLAST_USER_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D,
+			 32)
+__BUILD_BLAST_USER_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 32)
+__BUILD_BLAST_USER_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D,
+			 64)
+__BUILD_BLAST_USER_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 64)
+
 /* build blast_xxx_range, protected_blast_xxx_range */
 #define __BUILD_BLAST_CACHE_RANGE(pfx, desc, hitop, prot, extra)	\
 static inline void prot##extra##blast_##pfx##cache##_range(unsigned long start, \
@@ -450,12 +580,51 @@ static inline void prot##extra##blast_##pfx##cache##_range(unsigned long start,
 	__##pfx##flush_epilogue						\
 }
 
+#ifndef CONFIG_EVA
+
 __BUILD_BLAST_CACHE_RANGE(d, dcache, Hit_Writeback_Inv_D, protected_, )
-__BUILD_BLAST_CACHE_RANGE(s, scache, Hit_Writeback_Inv_SD, protected_, )
 __BUILD_BLAST_CACHE_RANGE(i, icache, Hit_Invalidate_I, protected_, )
+
+#else
+
+#define __BUILD_PROT_BLAST_CACHE_RANGE(pfx, desc, hitop)		\
+static inline void protected_blast_##pfx##cache##_range(unsigned long start,\
+							unsigned long end) \
+{									\
+	unsigned long lsize = cpu_##desc##_line_size();			\
+	unsigned long addr = start & ~(lsize - 1);			\
+	unsigned long aend = (end - 1) & ~(lsize - 1);			\
+									\
+	__##pfx##flush_prologue						\
+									\
+	if (segment_eq(get_fs(), USER_DS)) {				\
+		while (1) {						\
+			protected_cachee_op(hitop, addr);		\
+			if (addr == aend)				\
+				break;					\
+			addr += lsize;					\
+		}							\
+	} else {							\
+		while (1) {						\
+			protected_cache_op(hitop, addr);		\
+			if (addr == aend)				\
+				break;					\
+			addr += lsize;					\
+		}                                                       \
+									\
+	}								\
+	__##pfx##flush_epilogue						\
+}
+
+__BUILD_PROT_BLAST_CACHE_RANGE(d, dcache, Hit_Writeback_Inv_D)
+__BUILD_PROT_BLAST_CACHE_RANGE(i, icache, Hit_Invalidate_I)
+
+#endif
+__BUILD_BLAST_CACHE_RANGE(s, scache, Hit_Writeback_Inv_SD, protected_, )
 __BUILD_BLAST_CACHE_RANGE(i, icache, Hit_Invalidate_I_Loongson2, \
 	protected_, loongson2_)
 __BUILD_BLAST_CACHE_RANGE(d, dcache, Hit_Writeback_Inv_D, , )
+__BUILD_BLAST_CACHE_RANGE(i, icache, Hit_Invalidate_I, , )
 __BUILD_BLAST_CACHE_RANGE(s, scache, Hit_Writeback_Inv_SD, , )
 /* blast_inv_dcache_range */
 __BUILD_BLAST_CACHE_RANGE(inv_d, dcache, Hit_Invalidate_D, , )

arch/mips/include/asm/sigcontext.h

@@ -32,6 +32,8 @@ struct sigcontext32 {
 	__u32		sc_lo2;
 	__u32		sc_hi3;
 	__u32		sc_lo3;
+	__u64		sc_msaregs[32];	/* Most significant 64 bits */
+	__u32		sc_msa_csr;
 };
 #endif /* _MIPS_SIM == _MIPS_SIM_ABI64 || _MIPS_SIM == _MIPS_SIM_NABI32 */
 #endif /* _ASM_SIGCONTEXT_H */

arch/mips/include/asm/smp-cps.h

@@ -0,0 +1,33 @@
+/*
+ * Copyright (C) 2013 Imagination Technologies
+ * Author: Paul Burton <paul.burton@imgtec.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __MIPS_ASM_SMP_CPS_H__
+#define __MIPS_ASM_SMP_CPS_H__
+
+#ifndef __ASSEMBLY__
+
+struct boot_config {
+	unsigned int core;
+	unsigned int vpe;
+	unsigned long pc;
+	unsigned long sp;
+	unsigned long gp;
+};
+
+extern struct boot_config mips_cps_bootcfg;
+
+extern void mips_cps_core_entry(void);
+
+#else /* __ASSEMBLY__ */
+
+.extern mips_cps_bootcfg;
+
+#endif /* __ASSEMBLY__ */
+#endif /* __MIPS_ASM_SMP_CPS_H__ */

arch/mips/include/asm/smp-ops.h

@@ -13,6 +13,8 @@
 
 #include <linux/errno.h>
 
+#include <asm/mips-cm.h>
+
 #ifdef CONFIG_SMP
 
 #include <linux/cpumask.h>
@@ -43,6 +45,9 @@ static inline void plat_smp_setup(void)
 	mp_ops->smp_setup();
 }
 
+extern void gic_send_ipi_single(int cpu, unsigned int action);
+extern void gic_send_ipi_mask(const struct cpumask *mask, unsigned int action);
+
 #else /* !CONFIG_SMP */
 
 struct plat_smp_ops;
@@ -76,6 +81,9 @@ static inline int register_cmp_smp_ops(void)
 #ifdef CONFIG_MIPS_CMP
 	extern struct plat_smp_ops cmp_smp_ops;
 
+	if (!mips_cm_present())
+		return -ENODEV;
+
 	register_smp_ops(&cmp_smp_ops);
 
 	return 0;
@@ -97,4 +105,13 @@ static inline int register_vsmp_smp_ops(void)
 #endif
 }
 
+#ifdef CONFIG_MIPS_CPS
+extern int register_cps_smp_ops(void);
+#else
+static inline int register_cps_smp_ops(void)
+{
+	return -ENODEV;
+}
+#endif
+
 #endif /* __ASM_SMP_OPS_H */

arch/mips/include/asm/smp.h

@@ -42,6 +42,7 @@ extern int __cpu_logical_map[NR_CPUS];
 #define SMP_ICACHE_FLUSH	0x4
 /* Used by kexec crashdump to save all cpu's state */
 #define SMP_DUMP		0x8
+#define SMP_ASK_C0COUNT		0x10
 
 extern volatile cpumask_t cpu_callin_map;
 

arch/mips/include/asm/stackframe.h

@@ -435,7 +435,7 @@
 
 		.macro	RESTORE_SP_AND_RET
 		LONG_L	sp, PT_R29(sp)
-		.set	mips3
+		.set	arch=r4000
 		eret
 		.set	mips0
 		.endm

arch/mips/include/asm/switch_to.h

@@ -16,22 +16,29 @@
 #include <asm/watch.h>
 #include <asm/dsp.h>
 #include <asm/cop2.h>
+#include <asm/msa.h>
 
 struct task_struct;
 
+enum {
+	FP_SAVE_NONE	= 0,
+	FP_SAVE_VECTOR	= -1,
+	FP_SAVE_SCALAR	= 1,
+};
+
 /**
  * resume - resume execution of a task
  * @prev:	The task previously executed.
  * @next:	The task to begin executing.
  * @next_ti:	task_thread_info(next).
- * @usedfpu:	Non-zero if prev's FP context should be saved.
+ * @fp_save:	Which, if any, FP context to save for prev.
  *
  * This function is used whilst scheduling to save the context of prev & load
  * the context of next. Returns prev.
  */
 extern asmlinkage struct task_struct *resume(struct task_struct *prev,
 		struct task_struct *next, struct thread_info *next_ti,
-		u32 usedfpu);
+		s32 fp_save);
 
 extern unsigned int ll_bit;
 extern struct task_struct *ll_task;
@@ -75,7 +82,8 @@ do {									\
 
 #define switch_to(prev, next, last)					\
 do {									\
-	u32 __usedfpu, __c0_stat;					\
+	u32 __c0_stat;							\
+	s32 __fpsave = FP_SAVE_NONE;					\
 	__mips_mt_fpaff_switch_to(prev);				\
 	if (cpu_has_dsp)						\
 		__save_dsp(prev);					\
@@ -88,8 +96,12 @@ do {									\
 		write_c0_status(__c0_stat & ~ST0_CU2);			\
 	}								\
 	__clear_software_ll_bit();					\
-	__usedfpu = test_and_clear_tsk_thread_flag(prev, TIF_USEDFPU);	\
-	(last) = resume(prev, next, task_thread_info(next), __usedfpu); \
+	if (test_and_clear_tsk_thread_flag(prev, TIF_USEDFPU))		\
+		__fpsave = FP_SAVE_SCALAR;				\
+	if (test_and_clear_tsk_thread_flag(prev, TIF_USEDMSA))		\
+		__fpsave = FP_SAVE_VECTOR;				\
+	(last) = resume(prev, next, task_thread_info(next), __fpsave);	\
+	disable_msa();							\
 } while (0)
 
 #define finish_arch_switch(prev)					\

arch/mips/include/asm/syscall.h

@@ -20,11 +20,22 @@
 #include <linux/sched.h>
 #include <linux/uaccess.h>
 #include <asm/ptrace.h>
+#include <asm/unistd.h>
+
+#ifndef __NR_syscall /* Only defined if _MIPS_SIM == _MIPS_SIM_ABI32 */
+#define __NR_syscall 4000
+#endif
 
 static inline long syscall_get_nr(struct task_struct *task,
 				  struct pt_regs *regs)
 {
-	return regs->regs[2];
+	/* O32 ABI syscall() - Either 64-bit with O32 or 32-bit */
+	if ((config_enabled(CONFIG_32BIT) ||
+	    test_tsk_thread_flag(task, TIF_32BIT_REGS)) &&
+	    (regs->regs[2] == __NR_syscall))
+		return regs->regs[4];
+	else
+		return regs->regs[2];
 }
 
 static inline unsigned long mips_get_syscall_arg(unsigned long *arg,
@@ -68,6 +79,12 @@ static inline long syscall_get_return_value(struct task_struct *task,
 	return regs->regs[2];
 }
 
+static inline void syscall_rollback(struct task_struct *task,
+				    struct pt_regs *regs)
+{
+	/* Do nothing */
+}
+
 static inline void syscall_set_return_value(struct task_struct *task,
 					    struct pt_regs *regs,
 					    int error, long val)
@@ -87,6 +104,13 @@ static inline void syscall_get_arguments(struct task_struct *task,
 					 unsigned long *args)
 {
 	int ret;
+	/* O32 ABI syscall() - Either 64-bit with O32 or 32-bit */
+	if ((config_enabled(CONFIG_32BIT) ||
+	    test_tsk_thread_flag(task, TIF_32BIT_REGS)) &&
+	    (regs->regs[2] == __NR_syscall)) {
+		i++;
+		n++;
+	}
 
 	while (n--)
 		ret |= mips_get_syscall_arg(args++, task, regs, i++);
@@ -103,11 +127,13 @@ extern const unsigned long sys_call_table[];
 extern const unsigned long sys32_call_table[];
 extern const unsigned long sysn32_call_table[];
 
-static inline int __syscall_get_arch(void)
+static inline int syscall_get_arch(struct task_struct *task,
+				   struct pt_regs *regs)
 {
 	int arch = EM_MIPS;
 #ifdef CONFIG_64BIT
-	arch |=  __AUDIT_ARCH_64BIT;
+	if (!test_tsk_thread_flag(task, TIF_32BIT_REGS))
+		arch |= __AUDIT_ARCH_64BIT;
 #endif
 #if defined(__LITTLE_ENDIAN)
 	arch |=  __AUDIT_ARCH_LE;

arch/mips/include/asm/thread_info.h

@@ -116,6 +116,8 @@ static inline struct thread_info *current_thread_info(void)
 #define TIF_LOAD_WATCH		25	/* If set, load watch registers */
 #define TIF_SYSCALL_TRACEPOINT	26	/* syscall tracepoint instrumentation */
 #define TIF_32BIT_FPREGS	27	/* 32-bit floating point registers */
+#define TIF_USEDMSA		29	/* MSA has been used this quantum */
+#define TIF_MSA_CTX_LIVE	30	/* MSA context must be preserved */
 #define TIF_SYSCALL_TRACE	31	/* syscall trace active */
 
 #define _TIF_SYSCALL_TRACE	(1<<TIF_SYSCALL_TRACE)
@@ -133,10 +135,13 @@ static inline struct thread_info *current_thread_info(void)
 #define _TIF_FPUBOUND		(1<<TIF_FPUBOUND)
 #define _TIF_LOAD_WATCH		(1<<TIF_LOAD_WATCH)
 #define _TIF_32BIT_FPREGS	(1<<TIF_32BIT_FPREGS)
+#define _TIF_USEDMSA		(1<<TIF_USEDMSA)
+#define _TIF_MSA_CTX_LIVE	(1<<TIF_MSA_CTX_LIVE)
 #define _TIF_SYSCALL_TRACEPOINT	(1<<TIF_SYSCALL_TRACEPOINT)
 
 #define _TIF_WORK_SYSCALL_ENTRY	(_TIF_NOHZ | _TIF_SYSCALL_TRACE |	\
-				 _TIF_SYSCALL_AUDIT | _TIF_SYSCALL_TRACEPOINT)
+				 _TIF_SYSCALL_AUDIT | \
+				 _TIF_SYSCALL_TRACEPOINT | _TIF_SECCOMP)
 
 /* work to do in syscall_trace_leave() */
 #define _TIF_WORK_SYSCALL_EXIT	(_TIF_NOHZ | _TIF_SYSCALL_TRACE |	\

arch/mips/include/asm/uaccess.h

@@ -6,6 +6,7 @@
  * Copyright (C) 1996, 1997, 1998, 1999, 2000, 03, 04 by Ralf Baechle
  * Copyright (C) 1999, 2000 Silicon Graphics, Inc.
  * Copyright (C) 2007  Maciej W. Rozycki
+ * Copyright (C) 2014, Imagination Technologies Ltd.
  */
 #ifndef _ASM_UACCESS_H
 #define _ASM_UACCESS_H
@@ -13,6 +14,7 @@
 #include <linux/kernel.h>
 #include <linux/errno.h>
 #include <linux/thread_info.h>
+#include <asm/asm-eva.h>
 
 /*
  * The fs value determines whether argument validity checking should be
@@ -222,11 +224,44 @@ struct __large_struct { unsigned long buf[100]; };
  * Yuck.  We need two variants, one for 64bit operation and one
  * for 32 bit mode and old iron.
  */
+#ifndef CONFIG_EVA
+#define __get_kernel_common(val, size, ptr) __get_user_common(val, size, ptr)
+#else
+/*
+ * Kernel specific functions for EVA. We need to use normal load instructions
+ * to read data from kernel when operating in EVA mode. We use these macros to
+ * avoid redefining __get_user_asm for EVA.
+ */
+#undef _loadd
+#undef _loadw
+#undef _loadh
+#undef _loadb
 #ifdef CONFIG_32BIT
-#define __GET_USER_DW(val, ptr) __get_user_asm_ll32(val, ptr)
+#define _loadd			_loadw
+#else
+#define _loadd(reg, addr)	"ld " reg ", " addr
+#endif
+#define _loadw(reg, addr)	"lw " reg ", " addr
+#define _loadh(reg, addr)	"lh " reg ", " addr
+#define _loadb(reg, addr)	"lb " reg ", " addr
+
+#define __get_kernel_common(val, size, ptr)				\
+do {									\
+	switch (size) {							\
+	case 1: __get_data_asm(val, _loadb, ptr); break;		\
+	case 2: __get_data_asm(val, _loadh, ptr); break;		\
+	case 4: __get_data_asm(val, _loadw, ptr); break;		\
+	case 8: __GET_DW(val, _loadd, ptr); break;			\
+	default: __get_user_unknown(); break;				\
+	}								\
+} while (0)
+#endif
+
+#ifdef CONFIG_32BIT
+#define __GET_DW(val, insn, ptr) __get_data_asm_ll32(val, insn, ptr)
 #endif
 #ifdef CONFIG_64BIT
-#define __GET_USER_DW(val, ptr) __get_user_asm(val, "ld", ptr)
+#define __GET_DW(val, insn, ptr) __get_data_asm(val, insn, ptr)
 #endif
 
 extern void __get_user_unknown(void);
@@ -234,10 +269,10 @@ extern void __get_user_unknown(void);
 #define __get_user_common(val, size, ptr)				\
 do {									\
 	switch (size) {							\
-	case 1: __get_user_asm(val, "lb", ptr); break;			\
-	case 2: __get_user_asm(val, "lh", ptr); break;			\
-	case 4: __get_user_asm(val, "lw", ptr); break;			\
-	case 8: __GET_USER_DW(val, ptr); break;				\
+	case 1: __get_data_asm(val, user_lb, ptr); break;		\
+	case 2: __get_data_asm(val, user_lh, ptr); break;		\
+	case 4: __get_data_asm(val, user_lw, ptr); break;		\
+	case 8: __GET_DW(val, user_ld, ptr); break;			\
 	default: __get_user_unknown(); break;				\
 	}								\
 } while (0)
@@ -246,8 +281,12 @@ do {									\
 ({									\
 	int __gu_err;							\
 									\
-	__chk_user_ptr(ptr);						\
-	__get_user_common((x), size, ptr);				\
+	if (segment_eq(get_fs(), get_ds())) {				\
+		__get_kernel_common((x), size, ptr);			\
+	} else {							\
+		__chk_user_ptr(ptr);					\
+		__get_user_common((x), size, ptr);			\
+	}								\
 	__gu_err;							\
 })
 
@@ -257,18 +296,22 @@ do {									\
 	const __typeof__(*(ptr)) __user * __gu_ptr = (ptr);		\
 									\
 	might_fault();							\
-	if (likely(access_ok(VERIFY_READ,  __gu_ptr, size)))		\
-		__get_user_common((x), size, __gu_ptr);			\
+	if (likely(access_ok(VERIFY_READ,  __gu_ptr, size))) {		\
+		if (segment_eq(get_fs(), get_ds()))			\
+			__get_kernel_common((x), size, __gu_ptr);	\
+		else							\
+			__get_user_common((x), size, __gu_ptr);		\
+	}								\
 									\
 	__gu_err;							\
 })
 
-#define __get_user_asm(val, insn, addr)					\
+#define __get_data_asm(val, insn, addr)					\
 {									\
 	long __gu_tmp;							\
 									\
 	__asm__ __volatile__(						\
-	"1:	" insn "	%1, %3				\n"	\
+	"1:	"insn("%1", "%3")"				\n"	\
 	"2:							\n"	\
 	"	.insn						\n"	\
 	"	.section .fixup,\"ax\"				\n"	\
@@ -287,7 +330,7 @@ do {									\
 /*
  * Get a long long 64 using 32 bit registers.
  */
-#define __get_user_asm_ll32(val, addr)					\
+#define __get_data_asm_ll32(val, insn, addr)				\
 {									\
 	union {								\
 		unsigned long long	l;				\
@@ -295,8 +338,8 @@ do {									\
 	} __gu_tmp;							\
 									\
 	__asm__ __volatile__(						\
-	"1:	lw	%1, (%3)				\n"	\
-	"2:	lw	%D1, 4(%3)				\n"	\
+	"1:	" insn("%1", "(%3)")"				\n"	\
+	"2:	" insn("%D1", "4(%3)")"				\n"	\
 	"3:							\n"	\
 	"	.insn						\n"	\
 	"	.section	.fixup,\"ax\"			\n"	\
@@ -315,30 +358,73 @@ do {									\
 	(val) = __gu_tmp.t;						\
 }
 
+#ifndef CONFIG_EVA
+#define __put_kernel_common(ptr, size) __put_user_common(ptr, size)
+#else
+/*
+ * Kernel specific functions for EVA. We need to use normal load instructions
+ * to read data from kernel when operating in EVA mode. We use these macros to
+ * avoid redefining __get_data_asm for EVA.
+ */
+#undef _stored
+#undef _storew
+#undef _storeh
+#undef _storeb
+#ifdef CONFIG_32BIT
+#define _stored			_storew
+#else
+#define _stored(reg, addr)	"ld " reg ", " addr
+#endif
+
+#define _storew(reg, addr)	"sw " reg ", " addr
+#define _storeh(reg, addr)	"sh " reg ", " addr
+#define _storeb(reg, addr)	"sb " reg ", " addr
+
+#define __put_kernel_common(ptr, size)					\
+do {									\
+	switch (size) {							\
+	case 1: __put_data_asm(_storeb, ptr); break;			\
+	case 2: __put_data_asm(_storeh, ptr); break;			\
+	case 4: __put_data_asm(_storew, ptr); break;			\
+	case 8: __PUT_DW(_stored, ptr); break;				\
+	default: __put_user_unknown(); break;				\
+	}								\
+} while(0)
+#endif
+
 /*
  * Yuck.  We need two variants, one for 64bit operation and one
  * for 32 bit mode and old iron.
  */
 #ifdef CONFIG_32BIT
-#define __PUT_USER_DW(ptr) __put_user_asm_ll32(ptr)
+#define __PUT_DW(insn, ptr) __put_data_asm_ll32(insn, ptr)
 #endif
 #ifdef CONFIG_64BIT
-#define __PUT_USER_DW(ptr) __put_user_asm("sd", ptr)
+#define __PUT_DW(insn, ptr) __put_data_asm(insn, ptr)
 #endif
 
+#define __put_user_common(ptr, size)					\
+do {									\
+	switch (size) {							\
+	case 1: __put_data_asm(user_sb, ptr); break;			\
+	case 2: __put_data_asm(user_sh, ptr); break;			\
+	case 4: __put_data_asm(user_sw, ptr); break;			\
+	case 8: __PUT_DW(user_sd, ptr); break;				\
+	default: __put_user_unknown(); break;				\
+	}								\
+} while (0)
+
 #define __put_user_nocheck(x, ptr, size)				\
 ({									\
 	__typeof__(*(ptr)) __pu_val;					\
 	int __pu_err = 0;						\
 									\
-	__chk_user_ptr(ptr);						\
 	__pu_val = (x);							\
-	switch (size) {							\
-	case 1: __put_user_asm("sb", ptr); break;			\
-	case 2: __put_user_asm("sh", ptr); break;			\
-	case 4: __put_user_asm("sw", ptr); break;			\
-	case 8: __PUT_USER_DW(ptr); break;				\
-	default: __put_user_unknown(); break;				\
+	if (segment_eq(get_fs(), get_ds())) {				\
+		__put_kernel_common(ptr, size);				\
+	} else {							\
+		__chk_user_ptr(ptr);					\
+		__put_user_common(ptr, size);				\
 	}								\
 	__pu_err;							\
 })
@@ -351,21 +437,19 @@ do {									\
 									\
 	might_fault();							\
 	if (likely(access_ok(VERIFY_WRITE,  __pu_addr, size))) {	\
-		switch (size) {						\
-		case 1: __put_user_asm("sb", __pu_addr); break;		\
-		case 2: __put_user_asm("sh", __pu_addr); break;		\
-		case 4: __put_user_asm("sw", __pu_addr); break;		\
-		case 8: __PUT_USER_DW(__pu_addr); break;		\
-		default: __put_user_unknown(); break;			\
-		}							\
+		if (segment_eq(get_fs(), get_ds()))			\
+			__put_kernel_common(__pu_addr, size);		\
+		else							\
+			__put_user_common(__pu_addr, size);		\
 	}								\
+									\
 	__pu_err;							\
 })
 
-#define __put_user_asm(insn, ptr)					\
+#define __put_data_asm(insn, ptr)					\
 {									\
 	__asm__ __volatile__(						\
-	"1:	" insn "	%z2, %3		# __put_user_asm\n"	\
+	"1:	"insn("%z2", "%3")"	# __put_data_asm	\n"	\
 	"2:							\n"	\
 	"	.insn						\n"	\
 	"	.section	.fixup,\"ax\"			\n"	\
@@ -380,11 +464,11 @@ do {									\
 	  "i" (-EFAULT));						\
 }
 
-#define __put_user_asm_ll32(ptr)					\
+#define __put_data_asm_ll32(insn, ptr)					\
 {									\
 	__asm__ __volatile__(						\
-	"1:	sw	%2, (%3)	# __put_user_asm_ll32	\n"	\
-	"2:	sw	%D2, 4(%3)				\n"	\
+	"1:	"insn("%2", "(%3)")"	# __put_data_asm_ll32	\n"	\
+	"2:	"insn("%D2", "4(%3)")"				\n"	\
 	"3:							\n"	\
 	"	.insn						\n"	\
 	"	.section	.fixup,\"ax\"			\n"	\
@@ -402,6 +486,11 @@ do {									\
 
 extern void __put_user_unknown(void);
 
+/*
+ * ul{b,h,w} are macros and there are no equivalent macros for EVA.
+ * EVA unaligned access is handled in the ADE exception handler.
+ */
+#ifndef CONFIG_EVA
 /*
  * put_user_unaligned: - Write a simple value into user space.
  * @x:	 Value to copy to user space.
@@ -504,7 +593,7 @@ extern void __get_user_unaligned_unknown(void);
 #define __get_user_unaligned_common(val, size, ptr)			\
 do {									\
 	switch (size) {							\
-	case 1: __get_user_asm(val, "lb", ptr); break;			\
+	case 1: __get_data_asm(val, "lb", ptr); break;			\
 	case 2: __get_user_unaligned_asm(val, "ulh", ptr); break;	\
 	case 4: __get_user_unaligned_asm(val, "ulw", ptr); break;	\
 	case 8: __GET_USER_UNALIGNED_DW(val, ptr); break;		\
@@ -531,7 +620,7 @@ do {									\
 	__gu_err;							\
 })
 
-#define __get_user_unaligned_asm(val, insn, addr)			\
+#define __get_data_unaligned_asm(val, insn, addr)			\
 {									\
 	long __gu_tmp;							\
 									\
@@ -594,19 +683,23 @@ do {									\
 #define __PUT_USER_UNALIGNED_DW(ptr) __put_user_unaligned_asm("usd", ptr)
 #endif
 
+#define __put_user_unaligned_common(ptr, size)				\
+do {									\
+	switch (size) {							\
+	case 1: __put_data_asm("sb", ptr); break;			\
+	case 2: __put_user_unaligned_asm("ush", ptr); break;		\
+	case 4: __put_user_unaligned_asm("usw", ptr); break;		\
+	case 8: __PUT_USER_UNALIGNED_DW(ptr); break;			\
+	default: __put_user_unaligned_unknown(); break;			\
+} while (0)
+
 #define __put_user_unaligned_nocheck(x,ptr,size)			\
 ({									\
 	__typeof__(*(ptr)) __pu_val;					\
 	int __pu_err = 0;						\
 									\
 	__pu_val = (x);							\
-	switch (size) {							\
-	case 1: __put_user_asm("sb", ptr); break;			\
-	case 2: __put_user_unaligned_asm("ush", ptr); break;		\
-	case 4: __put_user_unaligned_asm("usw", ptr); break;		\
-	case 8: __PUT_USER_UNALIGNED_DW(ptr); break;			\
-	default: __put_user_unaligned_unknown(); break;			\
-	}								\
+	__put_user_unaligned_common(ptr, size);				\
 	__pu_err;							\
 })
 
@@ -616,15 +709,9 @@ do {									\
 	__typeof__(*(ptr)) __pu_val = (x);				\
 	int __pu_err = -EFAULT;						\
 									\
-	if (likely(access_ok(VERIFY_WRITE,  __pu_addr, size))) {	\
-		switch (size) {						\
-		case 1: __put_user_asm("sb", __pu_addr); break;		\
-		case 2: __put_user_unaligned_asm("ush", __pu_addr); break; \
-		case 4: __put_user_unaligned_asm("usw", __pu_addr); break; \
-		case 8: __PUT_USER_UNALGINED_DW(__pu_addr); break;	\
-		default: __put_user_unaligned_unknown(); break;		\
-		}							\
-	}								\
+	if (likely(access_ok(VERIFY_WRITE,  __pu_addr, size)))		\
+		__put_user_unaligned_common(__pu_addr, size);		\
+									\
 	__pu_err;							\
 })
 
@@ -669,6 +756,7 @@ do {									\
 }
 
 extern void __put_user_unaligned_unknown(void);
+#endif
 
 /*
  * We're generating jump to subroutines which will be outside the range of
@@ -693,6 +781,7 @@ extern void __put_user_unaligned_unknown(void);
 
 extern size_t __copy_user(void *__to, const void *__from, size_t __n);
 
+#ifndef CONFIG_EVA
 #define __invoke_copy_to_user(to, from, n)				\
 ({									\
 	register void __user *__cu_to_r __asm__("$4");			\
@@ -711,6 +800,11 @@ extern size_t __copy_user(void *__to, const void *__from, size_t __n);
 	__cu_len_r;							\
 })
 
+#define __invoke_copy_to_kernel(to, from, n)				\
+	__invoke_copy_to_user(to, from, n)
+
+#endif
+
 /*
  * __copy_to_user: - Copy a block of data into user space, with less checking.
  * @to:	  Destination address, in user space.
@@ -735,7 +829,12 @@ extern size_t __copy_user(void *__to, const void *__from, size_t __n);
 	__cu_from = (from);						\
 	__cu_len = (n);							\
 	might_fault();							\
-	__cu_len = __invoke_copy_to_user(__cu_to, __cu_from, __cu_len); \
+	if (segment_eq(get_fs(), get_ds()))				\
+		__cu_len = __invoke_copy_to_kernel(__cu_to, __cu_from,	\
+						   __cu_len);		\
+	else								\
+		__cu_len = __invoke_copy_to_user(__cu_to, __cu_from,	\
+						 __cu_len);		\
 	__cu_len;							\
 })
 
@@ -750,7 +849,12 @@ extern size_t __copy_user_inatomic(void *__to, const void *__from, size_t __n);
 	__cu_to = (to);							\
 	__cu_from = (from);						\
 	__cu_len = (n);							\
-	__cu_len = __invoke_copy_to_user(__cu_to, __cu_from, __cu_len); \
+	if (segment_eq(get_fs(), get_ds()))				\
+		__cu_len = __invoke_copy_to_kernel(__cu_to, __cu_from,	\
+						   __cu_len);		\
+	else								\
+		__cu_len = __invoke_copy_to_user(__cu_to, __cu_from,	\
+						 __cu_len);		\
 	__cu_len;							\
 })
 
@@ -763,8 +867,14 @@ extern size_t __copy_user_inatomic(void *__to, const void *__from, size_t __n);
 	__cu_to = (to);							\
 	__cu_from = (from);						\
 	__cu_len = (n);							\
-	__cu_len = __invoke_copy_from_user_inatomic(__cu_to, __cu_from, \
-						    __cu_len);		\
+	if (segment_eq(get_fs(), get_ds()))				\
+		__cu_len = __invoke_copy_from_kernel_inatomic(__cu_to,	\
+							      __cu_from,\
+							      __cu_len);\
+	else								\
+		__cu_len = __invoke_copy_from_user_inatomic(__cu_to,	\
+							    __cu_from,	\
+							    __cu_len);	\
 	__cu_len;							\
 })
 
@@ -790,14 +900,23 @@ extern size_t __copy_user_inatomic(void *__to, const void *__from, size_t __n);
 	__cu_to = (to);							\
 	__cu_from = (from);						\
 	__cu_len = (n);							\
-	if (access_ok(VERIFY_WRITE, __cu_to, __cu_len)) {		\
-		might_fault();						\
-		__cu_len = __invoke_copy_to_user(__cu_to, __cu_from,	\
-						 __cu_len);		\
+	if (segment_eq(get_fs(), get_ds())) {				\
+		__cu_len = __invoke_copy_to_kernel(__cu_to,		\
+						   __cu_from,		\
+						   __cu_len);		\
+	} else {							\
+		if (access_ok(VERIFY_WRITE, __cu_to, __cu_len)) {       \
+			might_fault();                                  \
+			__cu_len = __invoke_copy_to_user(__cu_to,	\
+							 __cu_from,	\
+							 __cu_len);     \
+		}							\
 	}								\
 	__cu_len;							\
 })
 
+#ifndef CONFIG_EVA
+
 #define __invoke_copy_from_user(to, from, n)				\
 ({									\
 	register void *__cu_to_r __asm__("$4");				\
@@ -821,6 +940,17 @@ extern size_t __copy_user_inatomic(void *__to, const void *__from, size_t __n);
 	__cu_len_r;							\
 })
 
+#define __invoke_copy_from_kernel(to, from, n)				\
+	__invoke_copy_from_user(to, from, n)
+
+/* For userland <-> userland operations */
+#define ___invoke_copy_in_user(to, from, n)				\
+	__invoke_copy_from_user(to, from, n)
+
+/* For kernel <-> kernel operations */
+#define ___invoke_copy_in_kernel(to, from, n)				\
+	__invoke_copy_from_user(to, from, n)
+
 #define __invoke_copy_from_user_inatomic(to, from, n)			\
 ({									\
 	register void *__cu_to_r __asm__("$4");				\
@@ -844,6 +974,97 @@ extern size_t __copy_user_inatomic(void *__to, const void *__from, size_t __n);
 	__cu_len_r;							\
 })
 
+#define __invoke_copy_from_kernel_inatomic(to, from, n)			\
+	__invoke_copy_from_user_inatomic(to, from, n)			\
+
+#else
+
+/* EVA specific functions */
+
+extern size_t __copy_user_inatomic_eva(void *__to, const void *__from,
+				       size_t __n);
+extern size_t __copy_from_user_eva(void *__to, const void *__from,
+				   size_t __n);
+extern size_t __copy_to_user_eva(void *__to, const void *__from,
+				 size_t __n);
+extern size_t __copy_in_user_eva(void *__to, const void *__from, size_t __n);
+
+#define __invoke_copy_from_user_eva_generic(to, from, n, func_ptr)	\
+({									\
+	register void *__cu_to_r __asm__("$4");				\
+	register const void __user *__cu_from_r __asm__("$5");		\
+	register long __cu_len_r __asm__("$6");				\
+									\
+	__cu_to_r = (to);						\
+	__cu_from_r = (from);						\
+	__cu_len_r = (n);						\
+	__asm__ __volatile__(						\
+	".set\tnoreorder\n\t"						\
+	__MODULE_JAL(func_ptr)						\
+	".set\tnoat\n\t"						\
+	__UA_ADDU "\t$1, %1, %2\n\t"					\
+	".set\tat\n\t"							\
+	".set\treorder"							\
+	: "+r" (__cu_to_r), "+r" (__cu_from_r), "+r" (__cu_len_r)	\
+	:								\
+	: "$8", "$9", "$10", "$11", "$12", "$14", "$15", "$24", "$31",	\
+	  DADDI_SCRATCH, "memory");					\
+	__cu_len_r;							\
+})
+
+#define __invoke_copy_to_user_eva_generic(to, from, n, func_ptr)	\
+({									\
+	register void *__cu_to_r __asm__("$4");				\
+	register const void __user *__cu_from_r __asm__("$5");		\
+	register long __cu_len_r __asm__("$6");				\
+									\
+	__cu_to_r = (to);						\
+	__cu_from_r = (from);						\
+	__cu_len_r = (n);						\
+	__asm__ __volatile__(						\
+	__MODULE_JAL(func_ptr)						\
+	: "+r" (__cu_to_r), "+r" (__cu_from_r), "+r" (__cu_len_r)	\
+	:								\
+	: "$8", "$9", "$10", "$11", "$12", "$14", "$15", "$24", "$31",	\
+	  DADDI_SCRATCH, "memory");					\
+	__cu_len_r;							\
+})
+
+/*
+ * Source or destination address is in userland. We need to go through
+ * the TLB
+ */
+#define __invoke_copy_from_user(to, from, n)				\
+	__invoke_copy_from_user_eva_generic(to, from, n, __copy_from_user_eva)
+
+#define __invoke_copy_from_user_inatomic(to, from, n)			\
+	__invoke_copy_from_user_eva_generic(to, from, n,		\
+					    __copy_user_inatomic_eva)
+
+#define __invoke_copy_to_user(to, from, n)				\
+	__invoke_copy_to_user_eva_generic(to, from, n, __copy_to_user_eva)
+
+#define ___invoke_copy_in_user(to, from, n)				\
+	__invoke_copy_from_user_eva_generic(to, from, n, __copy_in_user_eva)
+
+/*
+ * Source or destination address in the kernel. We are not going through
+ * the TLB
+ */
+#define __invoke_copy_from_kernel(to, from, n)				\
+	__invoke_copy_from_user_eva_generic(to, from, n, __copy_user)
+
+#define __invoke_copy_from_kernel_inatomic(to, from, n)			\
+	__invoke_copy_from_user_eva_generic(to, from, n, __copy_user_inatomic)
+
+#define __invoke_copy_to_kernel(to, from, n)				\
+	__invoke_copy_to_user_eva_generic(to, from, n, __copy_user)
+
+#define ___invoke_copy_in_kernel(to, from, n)				\
+	__invoke_copy_from_user_eva_generic(to, from, n, __copy_user)
+
+#endif /* CONFIG_EVA */
+
 /*
  * __copy_from_user: - Copy a block of data from user space, with less checking.
  * @to:	  Destination address, in kernel space.
@@ -901,10 +1122,17 @@ extern size_t __copy_user_inatomic(void *__to, const void *__from, size_t __n);
 	__cu_to = (to);							\
 	__cu_from = (from);						\
 	__cu_len = (n);							\
-	if (access_ok(VERIFY_READ, __cu_from, __cu_len)) {		\
-		might_fault();						\
-		__cu_len = __invoke_copy_from_user(__cu_to, __cu_from,	\
-						   __cu_len);		\
+	if (segment_eq(get_fs(), get_ds())) {				\
+		__cu_len = __invoke_copy_from_kernel(__cu_to,		\
+						     __cu_from,		\
+						     __cu_len);		\
+	} else {							\
+		if (access_ok(VERIFY_READ, __cu_from, __cu_len)) {	\
+			might_fault();                                  \
+			__cu_len = __invoke_copy_from_user(__cu_to,	\
+							   __cu_from,	\
+							   __cu_len);   \
+		}							\
 	}								\
 	__cu_len;							\
 })
@@ -918,9 +1146,14 @@ extern size_t __copy_user_inatomic(void *__to, const void *__from, size_t __n);
 	__cu_to = (to);							\
 	__cu_from = (from);						\
 	__cu_len = (n);							\
-	might_fault();							\
-	__cu_len = __invoke_copy_from_user(__cu_to, __cu_from,		\
-					   __cu_len);			\
+	if (segment_eq(get_fs(), get_ds())) {				\
+		__cu_len = ___invoke_copy_in_kernel(__cu_to, __cu_from,	\
+						    __cu_len);		\
+	} else {							\
+		might_fault();						\
+		__cu_len = ___invoke_copy_in_user(__cu_to, __cu_from,	\
+						  __cu_len);		\
+	}								\
 	__cu_len;							\
 })
 
@@ -933,11 +1166,17 @@ extern size_t __copy_user_inatomic(void *__to, const void *__from, size_t __n);
 	__cu_to = (to);							\
 	__cu_from = (from);						\
 	__cu_len = (n);							\
-	if (likely(access_ok(VERIFY_READ, __cu_from, __cu_len) &&	\
-		   access_ok(VERIFY_WRITE, __cu_to, __cu_len))) {	\
-		might_fault();						\
-		__cu_len = __invoke_copy_from_user(__cu_to, __cu_from,	\
-						   __cu_len);		\
+	if (segment_eq(get_fs(), get_ds())) {				\
+		__cu_len = ___invoke_copy_in_kernel(__cu_to,__cu_from,	\
+						    __cu_len);		\
+	} else {							\
+		if (likely(access_ok(VERIFY_READ, __cu_from, __cu_len) &&\
+			   access_ok(VERIFY_WRITE, __cu_to, __cu_len))) {\
+			might_fault();					\
+			__cu_len = ___invoke_copy_in_user(__cu_to,	\
+							  __cu_from,	\
+							  __cu_len);	\
+		}							\
 	}								\
 	__cu_len;							\
 })
@@ -1007,16 +1246,28 @@ __strncpy_from_user(char *__to, const char __user *__from, long __len)
 {
 	long res;
 
-	might_fault();
-	__asm__ __volatile__(
-		"move\t$4, %1\n\t"
-		"move\t$5, %2\n\t"
-		"move\t$6, %3\n\t"
-		__MODULE_JAL(__strncpy_from_user_nocheck_asm)
-		"move\t%0, $2"
-		: "=r" (res)
-		: "r" (__to), "r" (__from), "r" (__len)
-		: "$2", "$3", "$4", "$5", "$6", __UA_t0, "$31", "memory");
+	if (segment_eq(get_fs(), get_ds())) {
+		__asm__ __volatile__(
+			"move\t$4, %1\n\t"
+			"move\t$5, %2\n\t"
+			"move\t$6, %3\n\t"
+			__MODULE_JAL(__strncpy_from_kernel_nocheck_asm)
+			"move\t%0, $2"
+			: "=r" (res)
+			: "r" (__to), "r" (__from), "r" (__len)
+			: "$2", "$3", "$4", "$5", "$6", __UA_t0, "$31", "memory");
+	} else {
+		might_fault();
+		__asm__ __volatile__(
+			"move\t$4, %1\n\t"
+			"move\t$5, %2\n\t"
+			"move\t$6, %3\n\t"
+			__MODULE_JAL(__strncpy_from_user_nocheck_asm)
+			"move\t%0, $2"
+			: "=r" (res)
+			: "r" (__to), "r" (__from), "r" (__len)
+			: "$2", "$3", "$4", "$5", "$6", __UA_t0, "$31", "memory");
+	}
 
 	return res;
 }
@@ -1044,16 +1295,28 @@ strncpy_from_user(char *__to, const char __user *__from, long __len)
 {
 	long res;
 
-	might_fault();
-	__asm__ __volatile__(
-		"move\t$4, %1\n\t"
-		"move\t$5, %2\n\t"
-		"move\t$6, %3\n\t"
-		__MODULE_JAL(__strncpy_from_user_asm)
-		"move\t%0, $2"
-		: "=r" (res)
-		: "r" (__to), "r" (__from), "r" (__len)
-		: "$2", "$3", "$4", "$5", "$6", __UA_t0, "$31", "memory");
+	if (segment_eq(get_fs(), get_ds())) {
+		__asm__ __volatile__(
+			"move\t$4, %1\n\t"
+			"move\t$5, %2\n\t"
+			"move\t$6, %3\n\t"
+			__MODULE_JAL(__strncpy_from_kernel_asm)
+			"move\t%0, $2"
+			: "=r" (res)
+			: "r" (__to), "r" (__from), "r" (__len)
+			: "$2", "$3", "$4", "$5", "$6", __UA_t0, "$31", "memory");
+	} else {
+		might_fault();
+		__asm__ __volatile__(
+			"move\t$4, %1\n\t"
+			"move\t$5, %2\n\t"
+			"move\t$6, %3\n\t"
+			__MODULE_JAL(__strncpy_from_user_asm)
+			"move\t%0, $2"
+			: "=r" (res)
+			: "r" (__to), "r" (__from), "r" (__len)
+			: "$2", "$3", "$4", "$5", "$6", __UA_t0, "$31", "memory");
+	}
 
 	return res;
 }
@@ -1063,14 +1326,24 @@ static inline long __strlen_user(const char __user *s)
 {
 	long res;
 
-	might_fault();
-	__asm__ __volatile__(
-		"move\t$4, %1\n\t"
-		__MODULE_JAL(__strlen_user_nocheck_asm)
-		"move\t%0, $2"
-		: "=r" (res)
-		: "r" (s)
-		: "$2", "$4", __UA_t0, "$31");
+	if (segment_eq(get_fs(), get_ds())) {
+		__asm__ __volatile__(
+			"move\t$4, %1\n\t"
+			__MODULE_JAL(__strlen_kernel_nocheck_asm)
+			"move\t%0, $2"
+			: "=r" (res)
+			: "r" (s)
+			: "$2", "$4", __UA_t0, "$31");
+	} else {
+		might_fault();
+		__asm__ __volatile__(
+			"move\t$4, %1\n\t"
+			__MODULE_JAL(__strlen_user_nocheck_asm)
+			"move\t%0, $2"
+			: "=r" (res)
+			: "r" (s)
+			: "$2", "$4", __UA_t0, "$31");
+	}
 
 	return res;
 }
@@ -1093,14 +1366,24 @@ static inline long strlen_user(const char __user *s)
 {
 	long res;
 
-	might_fault();
-	__asm__ __volatile__(
-		"move\t$4, %1\n\t"
-		__MODULE_JAL(__strlen_user_asm)
-		"move\t%0, $2"
-		: "=r" (res)
-		: "r" (s)
-		: "$2", "$4", __UA_t0, "$31");
+	if (segment_eq(get_fs(), get_ds())) {
+		__asm__ __volatile__(
+			"move\t$4, %1\n\t"
+			__MODULE_JAL(__strlen_kernel_asm)
+			"move\t%0, $2"
+			: "=r" (res)
+			: "r" (s)
+			: "$2", "$4", __UA_t0, "$31");
+	} else {
+		might_fault();
+		__asm__ __volatile__(
+			"move\t$4, %1\n\t"
+			__MODULE_JAL(__strlen_kernel_asm)
+			"move\t%0, $2"
+			: "=r" (res)
+			: "r" (s)
+			: "$2", "$4", __UA_t0, "$31");
+	}
 
 	return res;
 }
@@ -1110,15 +1393,26 @@ static inline long __strnlen_user(const char __user *s, long n)
 {
 	long res;
 
-	might_fault();
-	__asm__ __volatile__(
-		"move\t$4, %1\n\t"
-		"move\t$5, %2\n\t"
-		__MODULE_JAL(__strnlen_user_nocheck_asm)
-		"move\t%0, $2"
-		: "=r" (res)
-		: "r" (s), "r" (n)
-		: "$2", "$4", "$5", __UA_t0, "$31");
+	if (segment_eq(get_fs(), get_ds())) {
+		__asm__ __volatile__(
+			"move\t$4, %1\n\t"
+			"move\t$5, %2\n\t"
+			__MODULE_JAL(__strnlen_kernel_nocheck_asm)
+			"move\t%0, $2"
+			: "=r" (res)
+			: "r" (s), "r" (n)
+			: "$2", "$4", "$5", __UA_t0, "$31");
+	} else {
+		might_fault();
+		__asm__ __volatile__(
+			"move\t$4, %1\n\t"
+			"move\t$5, %2\n\t"
+			__MODULE_JAL(__strnlen_user_nocheck_asm)
+			"move\t%0, $2"
+			: "=r" (res)
+			: "r" (s), "r" (n)
+			: "$2", "$4", "$5", __UA_t0, "$31");
+	}
 
 	return res;
 }
@@ -1142,14 +1436,25 @@ static inline long strnlen_user(const char __user *s, long n)
 	long res;
 
 	might_fault();
-	__asm__ __volatile__(
-		"move\t$4, %1\n\t"
-		"move\t$5, %2\n\t"
-		__MODULE_JAL(__strnlen_user_asm)
-		"move\t%0, $2"
-		: "=r" (res)
-		: "r" (s), "r" (n)
-		: "$2", "$4", "$5", __UA_t0, "$31");
+	if (segment_eq(get_fs(), get_ds())) {
+		__asm__ __volatile__(
+			"move\t$4, %1\n\t"
+			"move\t$5, %2\n\t"
+			__MODULE_JAL(__strnlen_kernel_asm)
+			"move\t%0, $2"
+			: "=r" (res)
+			: "r" (s), "r" (n)
+			: "$2", "$4", "$5", __UA_t0, "$31");
+	} else {
+		__asm__ __volatile__(
+			"move\t$4, %1\n\t"
+			"move\t$5, %2\n\t"
+			__MODULE_JAL(__strnlen_user_asm)
+			"move\t%0, $2"
+			: "=r" (res)
+			: "r" (s), "r" (n)
+			: "$2", "$4", "$5", __UA_t0, "$31");
+	}
 
 	return res;
 }

arch/mips/include/uapi/asm/inst.h

@@ -8,6 +8,7 @@
  * Copyright (C) 1996, 2000 by Ralf Baechle
  * Copyright (C) 2006 by Thiemo Seufer
  * Copyright (C) 2012 MIPS Technologies, Inc.  All rights reserved.
+ * Copyright (C) 2014 Imagination Technologies Ltd.
  */
 #ifndef _UAPI_ASM_INST_H
 #define _UAPI_ASM_INST_H
@@ -73,10 +74,16 @@ enum spec2_op {
 enum spec3_op {
 	ext_op, dextm_op, dextu_op, dext_op,
 	ins_op, dinsm_op, dinsu_op, dins_op,
-	lx_op = 0x0a,
-	bshfl_op = 0x20,
-	dbshfl_op = 0x24,
-	rdhwr_op = 0x3b
+	lx_op     = 0x0a, lwle_op   = 0x19,
+	lwre_op   = 0x1a, cachee_op = 0x1b,
+	sbe_op    = 0x1c, she_op    = 0x1d,
+	sce_op    = 0x1e, swe_op    = 0x1f,
+	bshfl_op  = 0x20, swle_op   = 0x21,
+	swre_op   = 0x22, prefe_op  = 0x23,
+	dbshfl_op = 0x24, lbue_op   = 0x28,
+	lhue_op   = 0x29, lbe_op    = 0x2c,
+	lhe_op    = 0x2d, lle_op    = 0x2e,
+	lwe_op    = 0x2f, rdhwr_op  = 0x3b
 };
 
 /*
@@ -592,6 +599,15 @@ struct v_format {				/* MDMX vector format */
 	;)))))))
 };
 
+struct spec3_format {   /* SPEC3 */
+	BITFIELD_FIELD(unsigned int opcode:6,
+	BITFIELD_FIELD(unsigned int rs:5,
+	BITFIELD_FIELD(unsigned int rt:5,
+	BITFIELD_FIELD(signed int simmediate:9,
+	BITFIELD_FIELD(unsigned int func:7,
+	;)))))
+};
+
 /*
  * microMIPS instruction formats (32-bit length)
  *
@@ -863,6 +879,7 @@ union mips_instruction {
 	struct b_format b_format;
 	struct ps_format ps_format;
 	struct v_format v_format;
+	struct spec3_format spec3_format;
 	struct fb_format fb_format;
 	struct fp0_format fp0_format;
 	struct mm_fp0_format mm_fp0_format;

arch/mips/include/uapi/asm/sigcontext.h

@@ -12,6 +12,10 @@
 #include <linux/types.h>
 #include <asm/sgidefs.h>
 
+/* Bits which may be set in sc_used_math */
+#define USEDMATH_FP	(1 << 0)
+#define USEDMATH_MSA	(1 << 1)
+
 #if _MIPS_SIM == _MIPS_SIM_ABI32
 
 /*
@@ -37,6 +41,8 @@ struct sigcontext {
 	unsigned long		sc_lo2;
 	unsigned long		sc_hi3;
 	unsigned long		sc_lo3;
+	unsigned long long	sc_msaregs[32];	/* Most significant 64 bits */
+	unsigned long		sc_msa_csr;
 };
 
 #endif /* _MIPS_SIM == _MIPS_SIM_ABI32 */
@@ -70,6 +76,8 @@ struct sigcontext {
 	__u32	sc_used_math;
 	__u32	sc_dsp;
 	__u32	sc_reserved;
+	__u64	sc_msaregs[32];
+	__u32	sc_msa_csr;
 };
 
 

arch/mips/kernel/Makefile

@@ -53,6 +53,8 @@ obj-$(CONFIG_MIPS_MT_FPAFF)	+= mips-mt-fpaff.o
 obj-$(CONFIG_MIPS_MT_SMTC)	+= smtc.o smtc-asm.o smtc-proc.o
 obj-$(CONFIG_MIPS_MT_SMP)	+= smp-mt.o
 obj-$(CONFIG_MIPS_CMP)		+= smp-cmp.o
+obj-$(CONFIG_MIPS_CPS)		+= smp-cps.o cps-vec.o
+obj-$(CONFIG_MIPS_GIC_IPI)	+= smp-gic.o
 obj-$(CONFIG_CPU_MIPSR2)	+= spram.o
 
 obj-$(CONFIG_MIPS_VPE_LOADER)	+= vpe.o
@@ -102,6 +104,9 @@ obj-$(CONFIG_HW_PERF_EVENTS)	+= perf_event_mipsxx.o
 
 obj-$(CONFIG_JUMP_LABEL)	+= jump_label.o
 
+obj-$(CONFIG_MIPS_CM)		+= mips-cm.o
+obj-$(CONFIG_MIPS_CPC)		+= mips-cpc.o
+
 #
 # DSP ASE supported for MIPS32 or MIPS64 Release 2 cores only. It is not
 # safe to unconditionnaly use the assembler -mdsp / -mdspr2 switches

arch/mips/kernel/asm-offsets.c

@@ -16,6 +16,7 @@
 #include <linux/suspend.h>
 #include <asm/ptrace.h>
 #include <asm/processor.h>
+#include <asm/smp-cps.h>
 
 #include <linux/kvm_host.h>
 
@@ -168,6 +169,72 @@ void output_thread_fpu_defines(void)
 	OFFSET(THREAD_FPR30, task_struct, thread.fpu.fpr[30]);
 	OFFSET(THREAD_FPR31, task_struct, thread.fpu.fpr[31]);
 
+	/* the least significant 64 bits of each FP register */
+	OFFSET(THREAD_FPR0_LS64, task_struct,
+	       thread.fpu.fpr[0].val64[FPR_IDX(64, 0)]);
+	OFFSET(THREAD_FPR1_LS64, task_struct,
+	       thread.fpu.fpr[1].val64[FPR_IDX(64, 0)]);
+	OFFSET(THREAD_FPR2_LS64, task_struct,
+	       thread.fpu.fpr[2].val64[FPR_IDX(64, 0)]);
+	OFFSET(THREAD_FPR3_LS64, task_struct,
+	       thread.fpu.fpr[3].val64[FPR_IDX(64, 0)]);
+	OFFSET(THREAD_FPR4_LS64, task_struct,
+	       thread.fpu.fpr[4].val64[FPR_IDX(64, 0)]);
+	OFFSET(THREAD_FPR5_LS64, task_struct,
+	       thread.fpu.fpr[5].val64[FPR_IDX(64, 0)]);
+	OFFSET(THREAD_FPR6_LS64, task_struct,
+	       thread.fpu.fpr[6].val64[FPR_IDX(64, 0)]);
+	OFFSET(THREAD_FPR7_LS64, task_struct,
+	       thread.fpu.fpr[7].val64[FPR_IDX(64, 0)]);
+	OFFSET(THREAD_FPR8_LS64, task_struct,
+	       thread.fpu.fpr[8].val64[FPR_IDX(64, 0)]);
+	OFFSET(THREAD_FPR9_LS64, task_struct,
+	       thread.fpu.fpr[9].val64[FPR_IDX(64, 0)]);
+	OFFSET(THREAD_FPR10_LS64, task_struct,
+	       thread.fpu.fpr[10].val64[FPR_IDX(64, 0)]);
+	OFFSET(THREAD_FPR11_LS64, task_struct,
+	       thread.fpu.fpr[11].val64[FPR_IDX(64, 0)]);
+	OFFSET(THREAD_FPR12_LS64, task_struct,
+	       thread.fpu.fpr[12].val64[FPR_IDX(64, 0)]);
+	OFFSET(THREAD_FPR13_LS64, task_struct,
+	       thread.fpu.fpr[13].val64[FPR_IDX(64, 0)]);
+	OFFSET(THREAD_FPR14_LS64, task_struct,
+	       thread.fpu.fpr[14].val64[FPR_IDX(64, 0)]);
+	OFFSET(THREAD_FPR15_LS64, task_struct,
+	       thread.fpu.fpr[15].val64[FPR_IDX(64, 0)]);
+	OFFSET(THREAD_FPR16_LS64, task_struct,
+	       thread.fpu.fpr[16].val64[FPR_IDX(64, 0)]);
+	OFFSET(THREAD_FPR17_LS64, task_struct,
+	       thread.fpu.fpr[17].val64[FPR_IDX(64, 0)]);
+	OFFSET(THREAD_FPR18_LS64, task_struct,
+	       thread.fpu.fpr[18].val64[FPR_IDX(64, 0)]);
+	OFFSET(THREAD_FPR19_LS64, task_struct,
+	       thread.fpu.fpr[19].val64[FPR_IDX(64, 0)]);
+	OFFSET(THREAD_FPR20_LS64, task_struct,
+	       thread.fpu.fpr[20].val64[FPR_IDX(64, 0)]);
+	OFFSET(THREAD_FPR21_LS64, task_struct,
+	       thread.fpu.fpr[21].val64[FPR_IDX(64, 0)]);
+	OFFSET(THREAD_FPR22_LS64, task_struct,
+	       thread.fpu.fpr[22].val64[FPR_IDX(64, 0)]);
+	OFFSET(THREAD_FPR23_LS64, task_struct,
+	       thread.fpu.fpr[23].val64[FPR_IDX(64, 0)]);
+	OFFSET(THREAD_FPR24_LS64, task_struct,
+	       thread.fpu.fpr[24].val64[FPR_IDX(64, 0)]);
+	OFFSET(THREAD_FPR25_LS64, task_struct,
+	       thread.fpu.fpr[25].val64[FPR_IDX(64, 0)]);
+	OFFSET(THREAD_FPR26_LS64, task_struct,
+	       thread.fpu.fpr[26].val64[FPR_IDX(64, 0)]);
+	OFFSET(THREAD_FPR27_LS64, task_struct,
+	       thread.fpu.fpr[27].val64[FPR_IDX(64, 0)]);
+	OFFSET(THREAD_FPR28_LS64, task_struct,
+	       thread.fpu.fpr[28].val64[FPR_IDX(64, 0)]);
+	OFFSET(THREAD_FPR29_LS64, task_struct,
+	       thread.fpu.fpr[29].val64[FPR_IDX(64, 0)]);
+	OFFSET(THREAD_FPR30_LS64, task_struct,
+	       thread.fpu.fpr[30].val64[FPR_IDX(64, 0)]);
+	OFFSET(THREAD_FPR31_LS64, task_struct,
+	       thread.fpu.fpr[31].val64[FPR_IDX(64, 0)]);
+
 	OFFSET(THREAD_FCR31, task_struct, thread.fpu.fcr31);
 	BLANK();
 }
@@ -228,6 +295,7 @@ void output_sc_defines(void)
 	OFFSET(SC_LO2, sigcontext, sc_lo2);
 	OFFSET(SC_HI3, sigcontext, sc_hi3);
 	OFFSET(SC_LO3, sigcontext, sc_lo3);
+	OFFSET(SC_MSAREGS, sigcontext, sc_msaregs);
 	BLANK();
 }
 #endif
@@ -242,6 +310,7 @@ void output_sc_defines(void)
 	OFFSET(SC_MDLO, sigcontext, sc_mdlo);
 	OFFSET(SC_PC, sigcontext, sc_pc);
 	OFFSET(SC_FPC_CSR, sigcontext, sc_fpc_csr);
+	OFFSET(SC_MSAREGS, sigcontext, sc_msaregs);
 	BLANK();
 }
 #endif
@@ -253,6 +322,7 @@ void output_sc32_defines(void)
 	OFFSET(SC32_FPREGS, sigcontext32, sc_fpregs);
 	OFFSET(SC32_FPC_CSR, sigcontext32, sc_fpc_csr);
 	OFFSET(SC32_FPC_EIR, sigcontext32, sc_fpc_eir);
+	OFFSET(SC32_MSAREGS, sigcontext32, sc_msaregs);
 	BLANK();
 }
 #endif
@@ -397,3 +467,15 @@ void output_kvm_defines(void)
 	OFFSET(COP0_STATUS, mips_coproc, reg[MIPS_CP0_STATUS][0]);
 	BLANK();
 }
+
+#ifdef CONFIG_MIPS_CPS
+void output_cps_defines(void)
+{
+	COMMENT(" MIPS CPS offsets. ");
+	OFFSET(BOOTCFG_CORE, boot_config, core);
+	OFFSET(BOOTCFG_VPE, boot_config, vpe);
+	OFFSET(BOOTCFG_PC, boot_config, pc);
+	OFFSET(BOOTCFG_SP, boot_config, sp);
+	OFFSET(BOOTCFG_GP, boot_config, gp);
+}
+#endif

arch/mips/kernel/bmips_vec.S

@@ -122,7 +122,7 @@ NESTED(bmips_reset_nmi_vec, PT_SIZE, sp)
 	jr	k0
 
 	RESTORE_ALL
-	.set	mips3
+	.set	arch=r4000
 	eret
 
 /***********************************************************************

arch/mips/kernel/cps-vec.S

@@ -0,0 +1,191 @@
+/*
+ * Copyright (C) 2013 Imagination Technologies
+ * Author: Paul Burton <paul.burton@imgtec.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <asm/addrspace.h>
+#include <asm/asm.h>
+#include <asm/asm-offsets.h>
+#include <asm/asmmacro.h>
+#include <asm/cacheops.h>
+#include <asm/mipsregs.h>
+
+#define GCR_CL_COHERENCE_OFS 0x2008
+
+.section .text.cps-vec
+.balign 0x1000
+.set noreorder
+
+LEAF(mips_cps_core_entry)
+	/*
+	 * These first 8 bytes will be patched by cps_smp_setup to load the
+	 * base address of the CM GCRs into register v1.
+	 */
+	.quad	0
+
+	/* Check whether we're here due to an NMI */
+	mfc0	k0, CP0_STATUS
+	and	k0, k0, ST0_NMI
+	beqz	k0, not_nmi
+	 nop
+
+	/* This is an NMI */
+	la	k0, nmi_handler
+	jr	k0
+	 nop
+
+not_nmi:
+	/* Setup Cause */
+	li	t0, CAUSEF_IV
+	mtc0	t0, CP0_CAUSE
+
+	/* Setup Status */
+	li	t0, ST0_CU1 | ST0_CU0
+	mtc0	t0, CP0_STATUS
+
+	/*
+	 * Clear the bits used to index the caches. Note that the architecture
+	 * dictates that writing to any of TagLo or TagHi selects 0 or 2 should
+	 * be valid for all MIPS32 CPUs, even those for which said writes are
+	 * unnecessary.
+	 */
+	mtc0	zero, CP0_TAGLO, 0
+	mtc0	zero, CP0_TAGHI, 0
+	mtc0	zero, CP0_TAGLO, 2
+	mtc0	zero, CP0_TAGHI, 2
+	ehb
+
+	/* Primary cache configuration is indicated by Config1 */
+	mfc0	v0, CP0_CONFIG, 1
+
+	/* Detect I-cache line size */
+	_EXT	t0, v0, MIPS_CONF1_IL_SHF, MIPS_CONF1_IL_SZ
+	beqz	t0, icache_done
+	 li	t1, 2
+	sllv	t0, t1, t0
+
+	/* Detect I-cache size */
+	_EXT	t1, v0, MIPS_CONF1_IS_SHF, MIPS_CONF1_IS_SZ
+	xori	t2, t1, 0x7
+	beqz	t2, 1f
+	 li	t3, 32
+	addi	t1, t1, 1
+	sllv	t1, t3, t1
+1:	/* At this point t1 == I-cache sets per way */
+	_EXT	t2, v0, MIPS_CONF1_IA_SHF, MIPS_CONF1_IA_SZ
+	addi	t2, t2, 1
+	mul	t1, t1, t0
+	mul	t1, t1, t2
+
+	li	a0, KSEG0
+	add	a1, a0, t1
+1:	cache	Index_Store_Tag_I, 0(a0)
+	add	a0, a0, t0
+	bne	a0, a1, 1b
+	 nop
+icache_done:
+
+	/* Detect D-cache line size */
+	_EXT	t0, v0, MIPS_CONF1_DL_SHF, MIPS_CONF1_DL_SZ
+	beqz	t0, dcache_done
+	 li	t1, 2
+	sllv	t0, t1, t0
+
+	/* Detect D-cache size */
+	_EXT	t1, v0, MIPS_CONF1_DS_SHF, MIPS_CONF1_DS_SZ
+	xori	t2, t1, 0x7
+	beqz	t2, 1f
+	 li	t3, 32
+	addi	t1, t1, 1
+	sllv	t1, t3, t1
+1:	/* At this point t1 == D-cache sets per way */
+	_EXT	t2, v0, MIPS_CONF1_DA_SHF, MIPS_CONF1_DA_SZ
+	addi	t2, t2, 1
+	mul	t1, t1, t0
+	mul	t1, t1, t2
+
+	li	a0, KSEG0
+	addu	a1, a0, t1
+	subu	a1, a1, t0
+1:	cache	Index_Store_Tag_D, 0(a0)
+	bne	a0, a1, 1b
+	 add	a0, a0, t0
+dcache_done:
+
+	/* Set Kseg0 cacheable, coherent, write-back, write-allocate */
+	mfc0	t0, CP0_CONFIG
+	ori	t0, 0x7
+	xori	t0, 0x2
+	mtc0	t0, CP0_CONFIG
+	ehb
+
+	/* Enter the coherent domain */
+	li	t0, 0xff
+	sw	t0, GCR_CL_COHERENCE_OFS(v1)
+	ehb
+
+	/* Jump to kseg0 */
+	la	t0, 1f
+	jr	t0
+	 nop
+
+1:	/* We're up, cached & coherent */
+
+	/*
+	 * TODO: We should check the VPE number we intended to boot here, and
+	 *       if non-zero we should start that VPE and stop this one. For
+	 *       the moment this doesn't matter since CPUs are brought up
+	 *       sequentially and in order, but once hotplug is implemented
+	 *       this will need revisiting.
+	 */
+
+	/* Off we go! */
+	la	t0, mips_cps_bootcfg
+	lw	t1, BOOTCFG_PC(t0)
+	lw	gp, BOOTCFG_GP(t0)
+	lw	sp, BOOTCFG_SP(t0)
+	jr	t1
+	 nop
+	END(mips_cps_core_entry)
+
+.org 0x200
+LEAF(excep_tlbfill)
+	b	.
+	 nop
+	END(excep_tlbfill)
+
+.org 0x280
+LEAF(excep_xtlbfill)
+	b	.
+	 nop
+	END(excep_xtlbfill)
+
+.org 0x300
+LEAF(excep_cache)
+	b	.
+	 nop
+	END(excep_cache)
+
+.org 0x380
+LEAF(excep_genex)
+	b	.
+	 nop
+	END(excep_genex)
+
+.org 0x400
+LEAF(excep_intex)
+	b	.
+	 nop
+	END(excep_intex)
+
+.org 0x480
+LEAF(excep_ejtag)
+	la	k0, ejtag_debug_handler
+	jr	k0
+	 nop
+	END(excep_ejtag)

arch/mips/kernel/cpu-probe.c

@@ -23,6 +23,8 @@
 #include <asm/cpu-type.h>
 #include <asm/fpu.h>
 #include <asm/mipsregs.h>
+#include <asm/mipsmtregs.h>
+#include <asm/msa.h>
 #include <asm/watch.h>
 #include <asm/elf.h>
 #include <asm/spram.h>
@@ -126,6 +128,20 @@ static inline int __cpu_has_fpu(void)
 	return ((cpu_get_fpu_id() & FPIR_IMP_MASK) != FPIR_IMP_NONE);
 }
 
+static inline unsigned long cpu_get_msa_id(void)
+{
+	unsigned long status, conf5, msa_id;
+
+	status = read_c0_status();
+	__enable_fpu(FPU_64BIT);
+	conf5 = read_c0_config5();
+	enable_msa();
+	msa_id = read_msa_ir();
+	write_c0_config5(conf5);
+	write_c0_status(status);
+	return msa_id;
+}
+
 static inline void cpu_probe_vmbits(struct cpuinfo_mips *c)
 {
 #ifdef __NEED_VMBITS_PROBE
@@ -166,11 +182,12 @@ static char unknown_isa[] = KERN_ERR \
 static void set_ftlb_enable(struct cpuinfo_mips *c, int enable)
 {
 	unsigned int config6;
-	/*
-	 * Config6 is implementation dependent and it's currently only
-	 * used by proAptiv
-	 */
-	if (c->cputype == CPU_PROAPTIV) {
+
+	/* It's implementation dependent how the FTLB can be enabled */
+	switch (c->cputype) {
+	case CPU_PROAPTIV:
+	case CPU_P5600:
+		/* proAptiv & related cores use Config6 to enable the FTLB */
 		config6 = read_c0_config6();
 		if (enable)
 			/* Enable FTLB */
@@ -179,6 +196,7 @@ static void set_ftlb_enable(struct cpuinfo_mips *c, int enable)
 			/* Disable FTLB */
 			write_c0_config6(config6 &  ~MIPS_CONF6_FTLBEN);
 		back_to_back_c0_hazard();
+		break;
 	}
 }
 
@@ -301,6 +319,8 @@ static inline unsigned int decode_config3(struct cpuinfo_mips *c)
 		c->ases |= MIPS_ASE_VZ;
 	if (config3 & MIPS_CONF3_SC)
 		c->options |= MIPS_CPU_SEGMENTS;
+	if (config3 & MIPS_CONF3_MSA)
+		c->ases |= MIPS_ASE_MSA;
 
 	return config3 & MIPS_CONF_M;
 }
@@ -367,6 +387,9 @@ static inline unsigned int decode_config5(struct cpuinfo_mips *c)
 	config5 &= ~MIPS_CONF5_UFR;
 	write_c0_config5(config5);
 
+	if (config5 & MIPS_CONF5_EVA)
+		c->options |= MIPS_CPU_EVA;
+
 	return config5 & MIPS_CONF_M;
 }
 
@@ -398,8 +421,13 @@ static void decode_configs(struct cpuinfo_mips *c)
 
 	mips_probe_watch_registers(c);
 
-	if (cpu_has_mips_r2)
+#ifndef CONFIG_MIPS_CPS
+	if (cpu_has_mips_r2) {
 		c->core = read_c0_ebase() & 0x3ff;
+		if (cpu_has_mipsmt)
+			c->core >>= fls(core_nvpes()) - 1;
+	}
+#endif
 }
 
 #define R4K_OPTS (MIPS_CPU_TLB | MIPS_CPU_4KEX | MIPS_CPU_4K_CACHE \
@@ -710,17 +738,23 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c, unsigned int cpu)
 			     MIPS_CPU_LLSC;
 		c->tlbsize = 64;
 		break;
-	case PRID_IMP_LOONGSON2:
-		c->cputype = CPU_LOONGSON2;
-		__cpu_name[cpu] = "ICT Loongson-2";
-
+	case PRID_IMP_LOONGSON_64:  /* Loongson-2/3 */
 		switch (c->processor_id & PRID_REV_MASK) {
 		case PRID_REV_LOONGSON2E:
+			c->cputype = CPU_LOONGSON2;
+			__cpu_name[cpu] = "ICT Loongson-2";
 			set_elf_platform(cpu, "loongson2e");
 			break;
 		case PRID_REV_LOONGSON2F:
+			c->cputype = CPU_LOONGSON2;
+			__cpu_name[cpu] = "ICT Loongson-2";
 			set_elf_platform(cpu, "loongson2f");
 			break;
+		case PRID_REV_LOONGSON3A:
+			c->cputype = CPU_LOONGSON3;
+			__cpu_name[cpu] = "ICT Loongson-3";
+			set_elf_platform(cpu, "loongson3a");
+			break;
 		}
 
 		set_isa(c, MIPS_CPU_ISA_III);
@@ -729,7 +763,7 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c, unsigned int cpu)
 			     MIPS_CPU_32FPR;
 		c->tlbsize = 64;
 		break;
-	case PRID_IMP_LOONGSON1:
+	case PRID_IMP_LOONGSON_32:  /* Loongson-1 */
 		decode_configs(c);
 
 		c->cputype = CPU_LOONGSON1;
@@ -806,7 +840,7 @@ static inline void cpu_probe_mips(struct cpuinfo_mips *c, unsigned int cpu)
 		__cpu_name[cpu] = "MIPS 1004Kc";
 		break;
 	case PRID_IMP_1074K:
-		c->cputype = CPU_74K;
+		c->cputype = CPU_1074K;
 		__cpu_name[cpu] = "MIPS 1074Kc";
 		break;
 	case PRID_IMP_INTERAPTIV_UP:
@@ -825,6 +859,14 @@ static inline void cpu_probe_mips(struct cpuinfo_mips *c, unsigned int cpu)
 		c->cputype = CPU_PROAPTIV;
 		__cpu_name[cpu] = "MIPS proAptiv (multi)";
 		break;
+	case PRID_IMP_P5600:
+		c->cputype = CPU_P5600;
+		__cpu_name[cpu] = "MIPS P5600";
+		break;
+	case PRID_IMP_M5150:
+		c->cputype = CPU_M5150;
+		__cpu_name[cpu] = "MIPS M5150";
+		break;
 	}
 
 	decode_configs(c);
@@ -1176,6 +1218,12 @@ void cpu_probe(void)
 	else
 		c->srsets = 1;
 
+	if (cpu_has_msa) {
+		c->msa_id = cpu_get_msa_id();
+		WARN(c->msa_id & MSA_IR_WRPF,
+		     "Vector register partitioning unimplemented!");
+	}
+
 	cpu_probe_vmbits(c);
 
 #ifdef CONFIG_64BIT
@@ -1192,4 +1240,6 @@ void cpu_report(void)
 		smp_processor_id(), c->processor_id, cpu_name_string());
 	if (c->options & MIPS_CPU_FPU)
 		printk(KERN_INFO "FPU revision is: %08x\n", c->fpu_id);
+	if (cpu_has_msa)
+		pr_info("MSA revision is: %08x\n", c->msa_id);
 }

arch/mips/kernel/ftrace.c

@@ -90,6 +90,7 @@ static inline void ftrace_dyn_arch_init_insns(void)
 static int ftrace_modify_code(unsigned long ip, unsigned int new_code)
 {
 	int faulted;
+	mm_segment_t old_fs;
 
 	/* *(unsigned int *)ip = new_code; */
 	safe_store_code(new_code, ip, faulted);
@@ -97,7 +98,10 @@ static int ftrace_modify_code(unsigned long ip, unsigned int new_code)
 	if (unlikely(faulted))
 		return -EFAULT;
 
+	old_fs = get_fs();
+	set_fs(get_ds());
 	flush_icache_range(ip, ip + 8);
+	set_fs(old_fs);
 
 	return 0;
 }