mmc: dt-bindings: Fix typo in mmc

This patch fix some spelling typo found in devicetree/bindings/mmc.

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

Documentation/devicetree/bindings/mmc/amlogic,meson-gx.txt

@@ -17,7 +17,7 @@ Required properties:
 	"core" - Main peripheral bus clock
 	"clkin0" - Parent clock of internal mux
 	"clkin1" - Other parent clock of internal mux
-  The driver has an interal mux clock which switches between clkin0 and clkin1 depending on the
+  The driver has an internal mux clock which switches between clkin0 and clkin1 depending on the
   clock rate requested by the MMC core.
 
 Example:

Documentation/devicetree/bindings/mmc/sdhci-st.txt

@@ -38,7 +38,7 @@ Optional properties:
 - bus-width:		Number of data lines.
 			See:  Documentation/devicetree/bindings/mmc/mmc.txt.
 
-- max-frequency:	Can be 200MHz, 100Mz or 50MHz (default) and used for
+- max-frequency:	Can be 200MHz, 100MHz or 50MHz (default) and used for
 			configuring the CCONFIG3 in the mmcss.
 			See:  Documentation/devicetree/bindings/mmc/mmc.txt.
 

Documentation/devicetree/bindings/mmc/sdhci.txt

@@ -5,7 +5,7 @@ host controllers refer to the mmc[1] bindings.
 
 Optional properties:
 - sdhci-caps-mask: The sdhci capabilities register is incorrect. This 64bit
-  property corresponds to the bits in the sdhci capabilty register. If the bit
+  property corresponds to the bits in the sdhci capability register. If the bit
   is on in the mask then the bit is incorrect in the register and should be
   turned off, before applying sdhci-caps.
 - sdhci-caps: The sdhci capabilities register is incorrect. This 64bit

Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt

@@ -16,7 +16,7 @@ Required Properties:
   each child-node representing a supported slot. There should be atleast one
   child node representing a card slot. The name of the child node representing
   the slot is recommended to be slot@n where n is the unique number of the slot
-  connnected to the controller. The following are optional properties which
+  connected to the controller. The following are optional properties which
   can be included in the slot child node.
 
 	* reg: specifies the physical slot number. The valid values of this