Merge tag 'iio-fixes-for-3.16c' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus

Jonathan writes:

Third round of iio fixes for the 3.16 cycle.

* Lots of hid sensors component drivers had a bug due to a local variable
  whose name suggested it was returned from the read_raw function not
  infact being returned (ret vs ret_type).  Fixed and unused ret removed.
* Block a possible race condition in tcs3472 by locking around some
  dependant i2c messages.
* Fix bug in the am335x driver fifo setup that occurs if the final
  channel enabled takes certain values.

drivers/iio/accel/hid-sensor-accel-3d.c

@@ -110,7 +110,6 @@ static int accel_3d_read_raw(struct iio_dev *indio_dev,
 	struct accel_3d_state *accel_state = iio_priv(indio_dev);
 	int report_id = -1;
 	u32 address;
-	int ret;
 	int ret_type;
 	s32 poll_value;
 
@@ -151,14 +150,12 @@ static int accel_3d_read_raw(struct iio_dev *indio_dev,
 		ret_type = IIO_VAL_INT;
 		break;
 	case IIO_CHAN_INFO_SAMP_FREQ:
-		ret = hid_sensor_read_samp_freq_value(
+		ret_type = hid_sensor_read_samp_freq_value(
 			&accel_state->common_attributes, val, val2);
-		ret_type = IIO_VAL_INT_PLUS_MICRO;
 		break;
 	case IIO_CHAN_INFO_HYSTERESIS:
-		ret = hid_sensor_read_raw_hyst_value(
+		ret_type = hid_sensor_read_raw_hyst_value(
 			&accel_state->common_attributes, val, val2);
-		ret_type = IIO_VAL_INT_PLUS_MICRO;
 		break;
 	default:
 		ret_type = -EINVAL;

drivers/iio/adc/ti_am335x_adc.c

@@ -374,7 +374,7 @@ static int tiadc_read_raw(struct iio_dev *indio_dev,
 			return -EAGAIN;
 		}
 	}
-	map_val = chan->channel + TOTAL_CHANNELS;
+	map_val = adc_dev->channel_step[chan->scan_index];
 
 	/*
 	 * We check the complete FIFO. We programmed just one entry but in case

drivers/iio/gyro/hid-sensor-gyro-3d.c

@@ -110,7 +110,6 @@ static int gyro_3d_read_raw(struct iio_dev *indio_dev,
 	struct gyro_3d_state *gyro_state = iio_priv(indio_dev);
 	int report_id = -1;
 	u32 address;
-	int ret;
 	int ret_type;
 	s32 poll_value;
 
@@ -151,14 +150,12 @@ static int gyro_3d_read_raw(struct iio_dev *indio_dev,
 		ret_type = IIO_VAL_INT;
 		break;
 	case IIO_CHAN_INFO_SAMP_FREQ:
-		ret = hid_sensor_read_samp_freq_value(
+		ret_type = hid_sensor_read_samp_freq_value(
 			&gyro_state->common_attributes, val, val2);
-			ret_type = IIO_VAL_INT_PLUS_MICRO;
 		break;
 	case IIO_CHAN_INFO_HYSTERESIS:
-		ret = hid_sensor_read_raw_hyst_value(
+		ret_type = hid_sensor_read_raw_hyst_value(
 			&gyro_state->common_attributes, val, val2);
-		ret_type = IIO_VAL_INT_PLUS_MICRO;
 		break;
 	default:
 		ret_type = -EINVAL;

drivers/iio/light/hid-sensor-als.c

@@ -79,7 +79,6 @@ static int als_read_raw(struct iio_dev *indio_dev,
 	struct als_state *als_state = iio_priv(indio_dev);
 	int report_id = -1;
 	u32 address;
-	int ret;
 	int ret_type;
 	s32 poll_value;
 
@@ -129,14 +128,12 @@ static int als_read_raw(struct iio_dev *indio_dev,
 		ret_type = IIO_VAL_INT;
 		break;
 	case IIO_CHAN_INFO_SAMP_FREQ:
-		ret = hid_sensor_read_samp_freq_value(
+		ret_type = hid_sensor_read_samp_freq_value(
 				&als_state->common_attributes, val, val2);
-		ret_type = IIO_VAL_INT_PLUS_MICRO;
 		break;
 	case IIO_CHAN_INFO_HYSTERESIS:
-		ret = hid_sensor_read_raw_hyst_value(
+		ret_type = hid_sensor_read_raw_hyst_value(
 				&als_state->common_attributes, val, val2);
-		ret_type = IIO_VAL_INT_PLUS_MICRO;
 		break;
 	default:
 		ret_type = -EINVAL;

drivers/iio/light/hid-sensor-prox.c

@@ -74,7 +74,6 @@ static int prox_read_raw(struct iio_dev *indio_dev,
 	struct prox_state *prox_state = iio_priv(indio_dev);
 	int report_id = -1;
 	u32 address;
-	int ret;
 	int ret_type;
 	s32 poll_value;
 
@@ -125,14 +124,12 @@ static int prox_read_raw(struct iio_dev *indio_dev,
 		ret_type = IIO_VAL_INT;
 		break;
 	case IIO_CHAN_INFO_SAMP_FREQ:
-		ret = hid_sensor_read_samp_freq_value(
+		ret_type = hid_sensor_read_samp_freq_value(
 				&prox_state->common_attributes, val, val2);
-		ret_type = IIO_VAL_INT_PLUS_MICRO;
 		break;
 	case IIO_CHAN_INFO_HYSTERESIS:
-		ret = hid_sensor_read_raw_hyst_value(
+		ret_type = hid_sensor_read_raw_hyst_value(
 				&prox_state->common_attributes, val, val2);
-		ret_type = IIO_VAL_INT_PLUS_MICRO;
 		break;
 	default:
 		ret_type = -EINVAL;

drivers/iio/light/tcs3472.c

@@ -52,6 +52,7 @@
 
 struct tcs3472_data {
 	struct i2c_client *client;
+	struct mutex lock;
 	u8 enable;
 	u8 control;
 	u8 atime;
@@ -116,10 +117,17 @@ static int tcs3472_read_raw(struct iio_dev *indio_dev,
 
 	switch (mask) {
 	case IIO_CHAN_INFO_RAW:
+		if (iio_buffer_enabled(indio_dev))
+			return -EBUSY;
+
+		mutex_lock(&data->lock);
 		ret = tcs3472_req_data(data);
-		if (ret < 0)
+		if (ret < 0) {
+			mutex_unlock(&data->lock);
 			return ret;
+		}
 		ret = i2c_smbus_read_word_data(data->client, chan->address);
+		mutex_unlock(&data->lock);
 		if (ret < 0)
 			return ret;
 		*val = ret;
@@ -255,6 +263,7 @@ static int tcs3472_probe(struct i2c_client *client,
 	data = iio_priv(indio_dev);
 	i2c_set_clientdata(client, indio_dev);
 	data->client = client;
+	mutex_init(&data->lock);
 
 	indio_dev->dev.parent = &client->dev;
 	indio_dev->info = &tcs3472_info;

drivers/iio/magnetometer/hid-sensor-magn-3d.c

@@ -110,7 +110,6 @@ static int magn_3d_read_raw(struct iio_dev *indio_dev,
 	struct magn_3d_state *magn_state = iio_priv(indio_dev);
 	int report_id = -1;
 	u32 address;
-	int ret;
 	int ret_type;
 	s32 poll_value;
 
@@ -153,14 +152,12 @@ static int magn_3d_read_raw(struct iio_dev *indio_dev,
 		ret_type = IIO_VAL_INT;
 		break;
 	case IIO_CHAN_INFO_SAMP_FREQ:
-		ret = hid_sensor_read_samp_freq_value(
+		ret_type = hid_sensor_read_samp_freq_value(
 			&magn_state->common_attributes, val, val2);
-		ret_type = IIO_VAL_INT_PLUS_MICRO;
 		break;
 	case IIO_CHAN_INFO_HYSTERESIS:
-		ret = hid_sensor_read_raw_hyst_value(
+		ret_type = hid_sensor_read_raw_hyst_value(
 			&magn_state->common_attributes, val, val2);
-		ret_type = IIO_VAL_INT_PLUS_MICRO;
 		break;
 	default:
 		ret_type = -EINVAL;

drivers/iio/pressure/hid-sensor-press.c

@@ -78,7 +78,6 @@ static int press_read_raw(struct iio_dev *indio_dev,
 	struct press_state *press_state = iio_priv(indio_dev);
 	int report_id = -1;
 	u32 address;
-	int ret;
 	int ret_type;
 	s32 poll_value;
 
@@ -128,14 +127,12 @@ static int press_read_raw(struct iio_dev *indio_dev,
 		ret_type = IIO_VAL_INT;
 		break;
 	case IIO_CHAN_INFO_SAMP_FREQ:
-		ret = hid_sensor_read_samp_freq_value(
+		ret_type = hid_sensor_read_samp_freq_value(
 				&press_state->common_attributes, val, val2);
-		ret_type = IIO_VAL_INT_PLUS_MICRO;
 		break;
 	case IIO_CHAN_INFO_HYSTERESIS:
-		ret = hid_sensor_read_raw_hyst_value(
+		ret_type = hid_sensor_read_raw_hyst_value(
 				&press_state->common_attributes, val, val2);
-		ret_type = IIO_VAL_INT_PLUS_MICRO;
 		break;
 	default:
 		ret_type = -EINVAL;