staging: comedi: 8253.h: remove unused header

All the comedi drivers have been converted to use the comedi_8254 module
to provide support for the 8254 timers. Remove this unused header.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/staging/comedi/drivers/8253.h

@@ -1,347 +0,0 @@
-/*
- * comedi/drivers/8253.h
- * Header file for 8253
- *
- * COMEDI - Linux Control and Measurement Device Interface
- * Copyright (C) 2000 David A. Schleef <ds@schleef.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#ifndef _8253_H
-#define _8253_H
-
-#include "../comedi.h"
-
-/*
- * Common oscillator base values in nanoseconds
- */
-#define I8254_OSC_BASE_10MHZ		100
-#define I8254_OSC_BASE_5MHZ		200
-#define I8254_OSC_BASE_4MHZ		250
-#define I8254_OSC_BASE_2MHZ		500
-#define I8254_OSC_BASE_1MHZ		1000
-
-static inline void i8253_cascade_ns_to_timer(int i8253_osc_base,
-					     unsigned int *d1,
-					     unsigned int *d2,
-					     unsigned int *nanosec,
-					     unsigned int flags)
-{
-	unsigned int divider;
-	unsigned int div1, div2;
-	unsigned int div1_glb, div2_glb, ns_glb;
-	unsigned int div1_lub, div2_lub, ns_lub;
-	unsigned int ns;
-	unsigned int start;
-	unsigned int ns_low, ns_high;
-	static const unsigned int max_count = 0x10000;
-	/*
-	 * exit early if everything is already correct (this can save time
-	 * since this function may be called repeatedly during command tests
-	 * and execution)
-	 */
-	div1 = *d1 ? *d1 : max_count;
-	div2 = *d2 ? *d2 : max_count;
-	divider = div1 * div2;
-	if (div1 * div2 * i8253_osc_base == *nanosec &&
-	    div1 > 1 && div1 <= max_count && div2 > 1 && div2 <= max_count &&
-	    /* check for overflow */
-	    divider > div1 && divider > div2 &&
-	    divider * i8253_osc_base > divider &&
-	    divider * i8253_osc_base > i8253_osc_base) {
-		return;
-	}
-
-	divider = *nanosec / i8253_osc_base;
-
-	div1_lub = div2_lub = 0;
-	div1_glb = div2_glb = 0;
-
-	ns_glb = 0;
-	ns_lub = 0xffffffff;
-
-	div2 = max_count;
-	start = divider / div2;
-	if (start < 2)
-		start = 2;
-	for (div1 = start; div1 <= divider / div1 + 1 && div1 <= max_count;
-	     div1++) {
-		for (div2 = divider / div1;
-		     div1 * div2 <= divider + div1 + 1 && div2 <= max_count;
-		     div2++) {
-			ns = i8253_osc_base * div1 * div2;
-			if (ns <= *nanosec && ns > ns_glb) {
-				ns_glb = ns;
-				div1_glb = div1;
-				div2_glb = div2;
-			}
-			if (ns >= *nanosec && ns < ns_lub) {
-				ns_lub = ns;
-				div1_lub = div1;
-				div2_lub = div2;
-			}
-		}
-	}
-
-	switch (flags & CMDF_ROUND_MASK) {
-	case CMDF_ROUND_NEAREST:
-	default:
-		ns_high = div1_lub * div2_lub * i8253_osc_base;
-		ns_low = div1_glb * div2_glb * i8253_osc_base;
-		if (ns_high - *nanosec < *nanosec - ns_low) {
-			div1 = div1_lub;
-			div2 = div2_lub;
-		} else {
-			div1 = div1_glb;
-			div2 = div2_glb;
-		}
-		break;
-	case CMDF_ROUND_UP:
-		div1 = div1_lub;
-		div2 = div2_lub;
-		break;
-	case CMDF_ROUND_DOWN:
-		div1 = div1_glb;
-		div2 = div2_glb;
-		break;
-	}
-
-	*nanosec = div1 * div2 * i8253_osc_base;
-	/* masking is done since counter maps zero to 0x10000 */
-	*d1 = div1 & 0xffff;
-	*d2 = div2 & 0xffff;
-}
-
-#ifndef CMDTEST
-/*
- * i8254_load programs 8254 counter chip.  It should also work for the 8253.
- * base_address is the lowest io address
- * for the chip (the address of counter 0).
- * counter_number is the counter you want to load (0,1 or 2)
- * count is the number to load into the counter.
- *
- * You probably want to use mode 2.
- *
- * Use i8254_mm_load() if you board uses memory-mapped io, it is
- * the same as i8254_load() except it uses writeb() instead of outb().
- *
- * Neither i8254_load() or i8254_read() do their loading/reading
- * atomically.  The 16 bit read/writes are performed with two successive
- * 8 bit read/writes.  So if two parts of your driver do a load/read on
- * the same counter, it may be necessary to protect these functions
- * with a spinlock.
- *
- * FMH
- */
-
-#define i8254_control_reg	3
-
-static inline int i8254_load(unsigned long base_address, unsigned int regshift,
-			     unsigned int counter_number, unsigned int count,
-			     unsigned int mode)
-{
-	unsigned int byte;
-
-	if (counter_number > 2)
-		return -1;
-	if (count > 0xffff)
-		return -1;
-	if (mode > 5)
-		return -1;
-	if ((mode == 2 || mode == 3) && count == 1)
-		return -1;
-
-	byte = counter_number << 6;
-	byte |= 0x30;		/* load low then high byte */
-	byte |= (mode << 1);	/* set counter mode */
-	outb(byte, base_address + (i8254_control_reg << regshift));
-	byte = count & 0xff;	/* lsb of counter value */
-	outb(byte, base_address + (counter_number << regshift));
-	byte = (count >> 8) & 0xff;	/* msb of counter value */
-	outb(byte, base_address + (counter_number << regshift));
-
-	return 0;
-}
-
-static inline int i8254_mm_load(void __iomem *base_address,
-				unsigned int regshift,
-				unsigned int counter_number,
-				unsigned int count,
-				unsigned int mode)
-{
-	unsigned int byte;
-
-	if (counter_number > 2)
-		return -1;
-	if (count > 0xffff)
-		return -1;
-	if (mode > 5)
-		return -1;
-	if ((mode == 2 || mode == 3) && count == 1)
-		return -1;
-
-	byte = counter_number << 6;
-	byte |= 0x30;		/* load low then high byte */
-	byte |= (mode << 1);	/* set counter mode */
-	writeb(byte, base_address + (i8254_control_reg << regshift));
-	byte = count & 0xff;	/* lsb of counter value */
-	writeb(byte, base_address + (counter_number << regshift));
-	byte = (count >> 8) & 0xff;	/* msb of counter value */
-	writeb(byte, base_address + (counter_number << regshift));
-
-	return 0;
-}
-
-/* Returns 16 bit counter value, should work for 8253 also. */
-static inline int i8254_read(unsigned long base_address, unsigned int regshift,
-			     unsigned int counter_number)
-{
-	unsigned int byte;
-	int ret;
-
-	if (counter_number > 2)
-		return -1;
-
-	/* latch counter */
-	byte = counter_number << 6;
-	outb(byte, base_address + (i8254_control_reg << regshift));
-
-	/* read lsb */
-	ret = inb(base_address + (counter_number << regshift));
-	/* read msb */
-	ret += inb(base_address + (counter_number << regshift)) << 8;
-
-	return ret;
-}
-
-static inline int i8254_mm_read(void __iomem *base_address,
-				unsigned int regshift,
-				unsigned int counter_number)
-{
-	unsigned int byte;
-	int ret;
-
-	if (counter_number > 2)
-		return -1;
-
-	/* latch counter */
-	byte = counter_number << 6;
-	writeb(byte, base_address + (i8254_control_reg << regshift));
-
-	/* read lsb */
-	ret = readb(base_address + (counter_number << regshift));
-	/* read msb */
-	ret += readb(base_address + (counter_number << regshift)) << 8;
-
-	return ret;
-}
-
-/* Loads 16 bit initial counter value, should work for 8253 also. */
-static inline void i8254_write(unsigned long base_address,
-			       unsigned int regshift,
-			       unsigned int counter_number, unsigned int count)
-{
-	unsigned int byte;
-
-	if (counter_number > 2)
-		return;
-
-	byte = count & 0xff;	/* lsb of counter value */
-	outb(byte, base_address + (counter_number << regshift));
-	byte = (count >> 8) & 0xff;	/* msb of counter value */
-	outb(byte, base_address + (counter_number << regshift));
-}
-
-static inline void i8254_mm_write(void __iomem *base_address,
-				  unsigned int regshift,
-				  unsigned int counter_number,
-				  unsigned int count)
-{
-	unsigned int byte;
-
-	if (counter_number > 2)
-		return;
-
-	byte = count & 0xff;	/* lsb of counter value */
-	writeb(byte, base_address + (counter_number << regshift));
-	byte = (count >> 8) & 0xff;	/* msb of counter value */
-	writeb(byte, base_address + (counter_number << regshift));
-}
-
-/*
- * Set counter mode, should work for 8253 also.
- * Note: the 'mode' value is different to that for i8254_load() and comes
- * from the INSN_CONFIG_8254_SET_MODE command:
- *   I8254_MODE0, I8254_MODE1, ..., I8254_MODE5
- * OR'ed with:
- *   I8254_BCD, I8254_BINARY
- */
-static inline int i8254_set_mode(unsigned long base_address,
-				 unsigned int regshift,
-				 unsigned int counter_number, unsigned int mode)
-{
-	unsigned int byte;
-
-	if (counter_number > 2)
-		return -1;
-	if (mode > (I8254_MODE5 | I8254_BCD))
-		return -1;
-
-	byte = counter_number << 6;
-	byte |= 0x30;		/* load low then high byte */
-	byte |= mode;		/* set counter mode and BCD|binary */
-	outb(byte, base_address + (i8254_control_reg << regshift));
-
-	return 0;
-}
-
-static inline int i8254_mm_set_mode(void __iomem *base_address,
-				    unsigned int regshift,
-				    unsigned int counter_number,
-				    unsigned int mode)
-{
-	unsigned int byte;
-
-	if (counter_number > 2)
-		return -1;
-	if (mode > (I8254_MODE5 | I8254_BCD))
-		return -1;
-
-	byte = counter_number << 6;
-	byte |= 0x30;		/* load low then high byte */
-	byte |= mode;		/* set counter mode and BCD|binary */
-	writeb(byte, base_address + (i8254_control_reg << regshift));
-
-	return 0;
-}
-
-static inline int i8254_status(unsigned long base_address,
-			       unsigned int regshift,
-			       unsigned int counter_number)
-{
-	outb(0xE0 | (2 << counter_number),
-	     base_address + (i8254_control_reg << regshift));
-	return inb(base_address + (counter_number << regshift));
-}
-
-static inline int i8254_mm_status(void __iomem *base_address,
-				  unsigned int regshift,
-				  unsigned int counter_number)
-{
-	writeb(0xE0 | (2 << counter_number),
-	       base_address + (i8254_control_reg << regshift));
-	return readb(base_address + (counter_number << regshift));
-}
-
-#endif
-
-#endif