Merge tag 'drm-intel-next-2014-10-03-no-ppgtt' of git://anongit.freedesktop.org/drm-intel into drm-next

Ok, new attempt, this time around with full ppgtt disabled again.

drm-intel-next-2014-10-03:
- first batch of skl stage 1 enabling
- fixes from Rodrigo to the PSR, fbc and sink crc code
- kerneldoc for the frontbuffer tracking code, runtime pm code and the basic
  interrupt enable/disable functions
- smaller stuff all over
drm-intel-next-2014-09-19:
- bunch more i830M fixes from Ville
- full ppgtt now again enabled by default
- more ppgtt fixes from Michel Thierry and Chris Wilson
- plane config work from Gustavo Padovan
- spinlock clarifications
- piles of smaller improvements all over, as usual

* tag 'drm-intel-next-2014-10-03-no-ppgtt' of git://anongit.freedesktop.org/drm-intel: (114 commits)
  Revert "drm/i915: Enable full PPGTT on gen7"
  drm/i915: Update DRIVER_DATE to 20141003
  drm/i915: Remove the duplicated logic between the two shrink phases
  drm/i915: kerneldoc for interrupt enable/disable functions
  drm/i915: Use dev_priv instead of dev in irq setup functions
  drm/i915: s/pm._irqs_disabled/pm.irqs_enabled/
  drm/i915: Clear TX FIFO reset master override bits on chv
  drm/i915: Make sure hardware uses the correct swing margin/deemph bits on chv
  drm/i915: make sink_crc return -EIO on aux read/write failure
  drm/i915: Constify send buffer for intel_dp_aux_ch
  drm/i915: De-magic the PSR AUX message
  drm/i915: Reinstate error level message for non-simulated gpu hangs
  drm/i915: Kerneldoc for intel_runtime_pm.c
  drm/i915: Call runtime_pm_disable directly
  drm/i915: Move intel_display_set_init_power to intel_runtime_pm.c
  drm/i915: Bikeshed rpm functions name a bit.
  drm/i915: Extract intel_runtime_pm.c
  drm/i915: Remove intel_modeset_suspend_hw
  drm/i915: spelling fixes for frontbuffer tracking kerneldoc
  drm/i915: Tighting frontbuffer tracking around flips
  ...

Documentation/DocBook/drm.tmpl

@@ -3787,6 +3787,26 @@ int num_ioctls;</synopsis>
       blocks. This excludes a set of SoC platforms with an SGX rendering unit,
       those have basic support through the gma500 drm driver.
     </para>
+    <sect1>
+      <title>Core Driver Infrastructure</title>
+      <para>
+	This section covers core driver infrastructure used by both the display
+	and the GEM parts of the driver.
+      </para>
+      <sect2>
+        <title>Runtime Power Management</title>
+!Pdrivers/gpu/drm/i915/intel_runtime_pm.c runtime pm
+!Idrivers/gpu/drm/i915/intel_runtime_pm.c
+      </sect2>
+      <sect2>
+        <title>Interrupt Handling</title>
+!Pdrivers/gpu/drm/i915/i915_irq.c interrupt handling
+!Fdrivers/gpu/drm/i915/i915_irq.c intel_irq_init intel_irq_init_hw intel_hpd_init
+!Fdrivers/gpu/drm/i915/i915_irq.c intel_irq_fini
+!Fdrivers/gpu/drm/i915/i915_irq.c intel_runtime_pm_disable_interrupts
+!Fdrivers/gpu/drm/i915/i915_irq.c intel_runtime_pm_enable_interrupts
+      </sect2>
+    </sect1>
     <sect1>
       <title>Display Hardware Handling</title>
       <para>
@@ -3803,6 +3823,13 @@ int num_ioctls;</synopsis>
           configuration change.
         </para>
       </sect2>
+      <sect2>
+        <title>Frontbuffer Tracking</title>
+!Pdrivers/gpu/drm/i915/intel_frontbuffer.c frontbuffer tracking
+!Idrivers/gpu/drm/i915/intel_frontbuffer.c
+!Fdrivers/gpu/drm/i915/intel_drv.h intel_frontbuffer_flip
+!Fdrivers/gpu/drm/i915/i915_gem.c i915_gem_track_fb
+      </sect2>
       <sect2>
         <title>Plane Configuration</title>
         <para>
@@ -3932,5 +3959,6 @@ int num_ioctls;</synopsis>
       </sect2>
     </sect1>
   </chapter>
+!Cdrivers/gpu/drm/i915/i915_irq.c
 </part>
 </book>

arch/x86/kernel/early-quirks.c

@@ -455,6 +455,23 @@ struct intel_stolen_funcs {
 	u32 (*base)(int num, int slot, int func, size_t size);
 };
 
+static size_t __init gen9_stolen_size(int num, int slot, int func)
+{
+	u16 gmch_ctrl;
+
+	gmch_ctrl = read_pci_config_16(num, slot, func, SNB_GMCH_CTRL);
+	gmch_ctrl >>= BDW_GMCH_GMS_SHIFT;
+	gmch_ctrl &= BDW_GMCH_GMS_MASK;
+
+	if (gmch_ctrl < 0xf0)
+		return gmch_ctrl << 25; /* 32 MB units */
+	else
+		/* 4MB increments starting at 0xf0 for 4MB */
+		return (gmch_ctrl - 0xf0 + 1) << 22;
+}
+
+typedef size_t (*stolen_size_fn)(int num, int slot, int func);
+
 static const struct intel_stolen_funcs i830_stolen_funcs __initconst = {
 	.base = i830_stolen_base,
 	.size = i830_stolen_size,
@@ -490,6 +507,11 @@ static const struct intel_stolen_funcs gen8_stolen_funcs __initconst = {
 	.size = gen8_stolen_size,
 };
 
+static const struct intel_stolen_funcs gen9_stolen_funcs __initconst = {
+	.base = intel_stolen_base,
+	.size = gen9_stolen_size,
+};
+
 static const struct intel_stolen_funcs chv_stolen_funcs __initconst = {
 	.base = intel_stolen_base,
 	.size = chv_stolen_size,
@@ -523,6 +545,7 @@ static const struct pci_device_id intel_stolen_ids[] __initconst = {
 	INTEL_BDW_M_IDS(&gen8_stolen_funcs),
 	INTEL_BDW_D_IDS(&gen8_stolen_funcs),
 	INTEL_CHV_IDS(&chv_stolen_funcs),
+	INTEL_SKL_IDS(&gen9_stolen_funcs),
 };
 
 static void __init intel_graphics_stolen(int num, int slot, int func)

drivers/char/agp/intel-gtt.c

@@ -153,7 +153,6 @@ static struct page *i8xx_alloc_pages(void)
 		__free_pages(page, 2);
 		return NULL;
 	}
-	get_page(page);
 	atomic_inc(&agp_bridge->current_memory_agp);
 	return page;
 }
@@ -164,7 +163,6 @@ static void i8xx_destroy_pages(struct page *page)
 		return;
 
 	set_pages_wb(page, 4);
-	put_page(page);
 	__free_pages(page, 2);
 	atomic_dec(&agp_bridge->current_memory_agp);
 }
@@ -300,7 +298,6 @@ static int intel_gtt_setup_scratch_page(void)
 	page = alloc_page(GFP_KERNEL | GFP_DMA32 | __GFP_ZERO);
 	if (page == NULL)
 		return -ENOMEM;
-	get_page(page);
 	set_pages_uc(page, 1);
 
 	if (intel_private.needs_dmar) {
@@ -560,7 +557,6 @@ static void intel_gtt_teardown_scratch_page(void)
 	set_pages_wb(intel_private.scratch_page, 1);
 	pci_unmap_page(intel_private.pcidev, intel_private.scratch_page_dma,
 		       PAGE_SIZE, PCI_DMA_BIDIRECTIONAL);
-	put_page(intel_private.scratch_page);
 	__free_page(intel_private.scratch_page);
 }
 

drivers/gpu/drm/i915/Makefile

@@ -11,7 +11,9 @@ i915-y := i915_drv.o \
 	  i915_params.o \
           i915_suspend.o \
 	  i915_sysfs.o \
-	  intel_pm.o
+	  intel_pm.o \
+	  intel_runtime_pm.o
+
 i915-$(CONFIG_COMPAT)   += i915_ioc32.o
 i915-$(CONFIG_DEBUG_FS) += i915_debugfs.o
 
@@ -43,6 +45,7 @@ i915-y += intel_renderstate_gen6.o \
 # modesetting core code
 i915-y += intel_bios.o \
 	  intel_display.o \
+	  intel_frontbuffer.o \
 	  intel_modes.o \
 	  intel_overlay.o \
 	  intel_sideband.o \

drivers/gpu/drm/i915/i915_cmd_parser.c

@@ -847,12 +847,7 @@ bool i915_needs_cmd_parser(struct intel_engine_cs *ring)
 	if (!ring->needs_cmd_parser)
 		return false;
 
-	/*
-	 * XXX: VLV is Gen7 and therefore has cmd_tables, but has PPGTT
-	 * disabled. That will cause all of the parser's PPGTT checks to
-	 * fail. For now, disable parsing when PPGTT is off.
-	 */
-	if (USES_PPGTT(ring->dev))
+	if (!USES_PPGTT(ring->dev))
 		return false;
 
 	return (i915.enable_cmd_parser == 1);
@@ -888,8 +883,10 @@ static bool check_cmd(const struct intel_engine_cs *ring,
 		 * OACONTROL writes to only MI_LOAD_REGISTER_IMM commands.
 		 */
 		if (reg_addr == OACONTROL) {
-			if (desc->cmd.value == MI_LOAD_REGISTER_MEM)
+			if (desc->cmd.value == MI_LOAD_REGISTER_MEM) {
+				DRM_DEBUG_DRIVER("CMD: Rejected LRM to OACONTROL\n");
 				return false;
+			}
 
 			if (desc->cmd.value == MI_LOAD_REGISTER_IMM(1))
 				*oacontrol_set = (cmd[2] != 0);

drivers/gpu/drm/i915/i915_debugfs.c

@@ -516,7 +516,6 @@ static int i915_gem_pageflip_info(struct seq_file *m, void *data)
 	struct drm_info_node *node = m->private;
 	struct drm_device *dev = node->minor->dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
-	unsigned long flags;
 	struct intel_crtc *crtc;
 	int ret;
 
@@ -529,7 +528,7 @@ static int i915_gem_pageflip_info(struct seq_file *m, void *data)
 		const char plane = plane_name(crtc->plane);
 		struct intel_unpin_work *work;
 
-		spin_lock_irqsave(&dev->event_lock, flags);
+		spin_lock_irq(&dev->event_lock);
 		work = crtc->unpin_work;
 		if (work == NULL) {
 			seq_printf(m, "No flip due on pipe %c (plane %c)\n",
@@ -575,7 +574,7 @@ static int i915_gem_pageflip_info(struct seq_file *m, void *data)
 				seq_printf(m, "MMIO update completed? %d\n",  addr == work->gtt_offset);
 			}
 		}
-		spin_unlock_irqrestore(&dev->event_lock, flags);
+		spin_unlock_irq(&dev->event_lock);
 	}
 
 	mutex_unlock(&dev->struct_mutex);
@@ -717,7 +716,7 @@ static int i915_interrupt_info(struct seq_file *m, void *data)
 		}
 
 		for_each_pipe(dev_priv, pipe) {
-			if (!intel_display_power_enabled(dev_priv,
+			if (!intel_display_power_is_enabled(dev_priv,
 						POWER_DOMAIN_PIPE(pipe))) {
 				seq_printf(m, "Pipe %c power disabled\n",
 					   pipe_name(pipe));
@@ -1986,7 +1985,7 @@ static int i915_swizzle_info(struct seq_file *m, void *data)
 			   I915_READ(MAD_DIMM_C2));
 		seq_printf(m, "TILECTL = 0x%08x\n",
 			   I915_READ(TILECTL));
-		if (IS_GEN8(dev))
+		if (INTEL_INFO(dev)->gen >= 8)
 			seq_printf(m, "GAMTARBMODE = 0x%08x\n",
 				   I915_READ(GAMTARBMODE));
 		else

drivers/gpu/drm/i915/i915_dma.c

@@ -1338,14 +1338,7 @@ static int i915_load_modeset_init(struct drm_device *dev)
 
 	intel_power_domains_init_hw(dev_priv);
 
-	/*
-	 * We enable some interrupt sources in our postinstall hooks, so mark
-	 * interrupts as enabled _before_ actually enabling them to avoid
-	 * special cases in our ordering checks.
-	 */
-	dev_priv->pm._irqs_disabled = false;
-
-	ret = drm_irq_install(dev, dev->pdev->irq);
+	ret = intel_irq_install(dev_priv);
 	if (ret)
 		goto cleanup_gem_stolen;
 
@@ -1370,7 +1363,7 @@ static int i915_load_modeset_init(struct drm_device *dev)
 		goto cleanup_gem;
 
 	/* Only enable hotplug handling once the fbdev is fully set up. */
-	intel_hpd_init(dev);
+	intel_hpd_init(dev_priv);
 
 	/*
 	 * Some ports require correctly set-up hpd registers for detection to
@@ -1534,7 +1527,7 @@ static void intel_device_info_runtime_init(struct drm_device *dev)
 
 	info = (struct intel_device_info *)&dev_priv->info;
 
-	if (IS_VALLEYVIEW(dev))
+	if (IS_VALLEYVIEW(dev) || INTEL_INFO(dev)->gen == 9)
 		for_each_pipe(dev_priv, pipe)
 			info->num_sprites[pipe] = 2;
 	else
@@ -1614,7 +1607,7 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags)
 
 	spin_lock_init(&dev_priv->irq_lock);
 	spin_lock_init(&dev_priv->gpu_error.lock);
-	spin_lock_init(&dev_priv->backlight_lock);
+	mutex_init(&dev_priv->backlight_lock);
 	spin_lock_init(&dev_priv->uncore.lock);
 	spin_lock_init(&dev_priv->mm.object_stat_lock);
 	spin_lock_init(&dev_priv->mmio_flip_lock);
@@ -1740,7 +1733,7 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags)
 		goto out_freewq;
 	}
 
-	intel_irq_init(dev);
+	intel_irq_init(dev_priv);
 	intel_uncore_sanitize(dev);
 
 	/* Try to make sure MCHBAR is enabled before poking at it */
@@ -1798,12 +1791,12 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags)
 	if (IS_GEN5(dev))
 		intel_gpu_ips_init(dev_priv);
 
-	intel_init_runtime_pm(dev_priv);
+	intel_runtime_pm_enable(dev_priv);
 
 	return 0;
 
 out_power_well:
-	intel_power_domains_remove(dev_priv);
+	intel_power_domains_fini(dev_priv);
 	drm_vblank_cleanup(dev);
 out_gem_unload:
 	WARN_ON(unregister_oom_notifier(&dev_priv->mm.oom_notifier));
@@ -1846,16 +1839,10 @@ int i915_driver_unload(struct drm_device *dev)
 		return ret;
 	}
 
-	intel_fini_runtime_pm(dev_priv);
+	intel_power_domains_fini(dev_priv);
 
 	intel_gpu_ips_teardown();
 
-	/* The i915.ko module is still not prepared to be loaded when
-	 * the power well is not enabled, so just enable it in case
-	 * we're going to unload/reload. */
-	intel_display_set_init_power(dev_priv, true);
-	intel_power_domains_remove(dev_priv);
-
 	i915_teardown_sysfs(dev);
 
 	WARN_ON(unregister_oom_notifier(&dev_priv->mm.oom_notifier));

drivers/gpu/drm/i915/i915_drv.c

@@ -356,6 +356,19 @@ static const struct intel_device_info intel_cherryview_info = {
 	CURSOR_OFFSETS,
 };
 
+static const struct intel_device_info intel_skylake_info = {
+	.is_preliminary = 1,
+	.is_skylake = 1,
+	.gen = 9, .num_pipes = 3,
+	.need_gfx_hws = 1, .has_hotplug = 1,
+	.ring_mask = RENDER_RING | BSD_RING | BLT_RING | VEBOX_RING,
+	.has_llc = 1,
+	.has_ddi = 1,
+	.has_fbc = 1,
+	GEN_DEFAULT_PIPEOFFSETS,
+	IVB_CURSOR_OFFSETS,
+};
+
 /*
  * Make sure any device matches here are from most specific to most
  * general.  For example, since the Quanta match is based on the subsystem
@@ -392,7 +405,8 @@ static const struct intel_device_info intel_cherryview_info = {
 	INTEL_BDW_GT12D_IDS(&intel_broadwell_d_info),	\
 	INTEL_BDW_GT3M_IDS(&intel_broadwell_gt3m_info),	\
 	INTEL_BDW_GT3D_IDS(&intel_broadwell_gt3d_info), \
-	INTEL_CHV_IDS(&intel_cherryview_info)
+	INTEL_CHV_IDS(&intel_cherryview_info),	\
+	INTEL_SKL_IDS(&intel_skylake_info)
 
 static const struct pci_device_id pciidlist[] = {		/* aka */
 	INTEL_PCI_IDS,
@@ -461,6 +475,16 @@ void intel_detect_pch(struct drm_device *dev)
 				DRM_DEBUG_KMS("Found LynxPoint LP PCH\n");
 				WARN_ON(!IS_HASWELL(dev));
 				WARN_ON(!IS_ULT(dev));
+			} else if (id == INTEL_PCH_SPT_DEVICE_ID_TYPE) {
+				dev_priv->pch_type = PCH_SPT;
+				DRM_DEBUG_KMS("Found SunrisePoint PCH\n");
+				WARN_ON(!IS_SKYLAKE(dev));
+				WARN_ON(IS_ULT(dev));
+			} else if (id == INTEL_PCH_SPT_LP_DEVICE_ID_TYPE) {
+				dev_priv->pch_type = PCH_SPT;
+				DRM_DEBUG_KMS("Found SunrisePoint LP PCH\n");
+				WARN_ON(!IS_SKYLAKE(dev));
+				WARN_ON(!IS_ULT(dev));
 			} else
 				continue;
 
@@ -575,14 +599,14 @@ static int i915_drm_freeze(struct drm_device *dev)
 
 		flush_delayed_work(&dev_priv->rps.delayed_resume_work);
 
-		intel_runtime_pm_disable_interrupts(dev);
+		intel_runtime_pm_disable_interrupts(dev_priv);
 		intel_hpd_cancel_work(dev_priv);
 
 		intel_suspend_encoders(dev_priv);
 
 		intel_suspend_gt_powersave(dev);
 
-		intel_modeset_suspend_hw(dev);
+		intel_suspend_hw(dev);
 	}
 
 	i915_gem_suspend_gtt_mappings(dev);
@@ -680,16 +704,16 @@ static int __i915_drm_thaw(struct drm_device *dev, bool restore_gtt_mappings)
 		}
 		mutex_unlock(&dev->struct_mutex);
 
-		intel_runtime_pm_restore_interrupts(dev);
+		/* We need working interrupts for modeset enabling ... */
+		intel_runtime_pm_enable_interrupts(dev_priv);
 
 		intel_modeset_init_hw(dev);
 
 		{
-			unsigned long irqflags;
-			spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
+			spin_lock_irq(&dev_priv->irq_lock);
 			if (dev_priv->display.hpd_irq_setup)
 				dev_priv->display.hpd_irq_setup(dev);
-			spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
+			spin_unlock_irq(&dev_priv->irq_lock);
 		}
 
 		intel_dp_mst_resume(dev);
@@ -703,7 +727,7 @@ static int __i915_drm_thaw(struct drm_device *dev, bool restore_gtt_mappings)
 		 * bother with the tiny race here where we might loose hotplug
 		 * notifications.
 		 * */
-		intel_hpd_init(dev);
+		intel_hpd_init(dev_priv);
 		/* Config may have changed between suspend and resume */
 		drm_helper_hpd_irq_event(dev);
 	}
@@ -820,6 +844,9 @@ int i915_reset(struct drm_device *dev)
 		}
 	}
 
+	if (i915_stop_ring_allow_warn(dev_priv))
+		pr_notice("drm/i915: Resetting chip after gpu hang\n");
+
 	if (ret) {
 		DRM_ERROR("Failed to reset chip: %i\n", ret);
 		mutex_unlock(&dev->struct_mutex);
@@ -1446,12 +1473,12 @@ static int intel_runtime_suspend(struct device *device)
 	 * intel_mark_idle().
 	 */
 	cancel_work_sync(&dev_priv->rps.work);
-	intel_runtime_pm_disable_interrupts(dev);
+	intel_runtime_pm_disable_interrupts(dev_priv);
 
 	ret = intel_suspend_complete(dev_priv);
 	if (ret) {
 		DRM_ERROR("Runtime suspend failed, disabling it (%d)\n", ret);
-		intel_runtime_pm_restore_interrupts(dev);
+		intel_runtime_pm_enable_interrupts(dev_priv);
 
 		return ret;
 	}
@@ -1511,7 +1538,7 @@ static int intel_runtime_resume(struct device *device)
 	i915_gem_init_swizzling(dev);
 	gen6_update_ring_freq(dev);
 
-	intel_runtime_pm_restore_interrupts(dev);
+	intel_runtime_pm_enable_interrupts(dev_priv);
 	intel_reset_gt_powersave(dev);
 
 	if (ret)

drivers/gpu/drm/i915/i915_drv.h

@@ -55,7 +55,7 @@
 
 #define DRIVER_NAME		"i915"
 #define DRIVER_DESC		"Intel Graphics"
-#define DRIVER_DATE		"20140905"
+#define DRIVER_DATE		"20141003"
 
 enum pipe {
 	INVALID_PIPE = -1,
@@ -76,6 +76,14 @@ enum transcoder {
 };
 #define transcoder_name(t) ((t) + 'A')
 
+/*
+ * This is the maximum (across all platforms) number of planes (primary +
+ * sprites) that can be active at the same time on one pipe.
+ *
+ * This value doesn't count the cursor plane.
+ */
+#define I915_MAX_PLANES	3
+
 enum plane {
 	PLANE_A = 0,
 	PLANE_B,
@@ -551,6 +559,7 @@ struct intel_uncore {
 	func(is_ivybridge) sep \
 	func(is_valleyview) sep \
 	func(is_haswell) sep \
+	func(is_skylake) sep \
 	func(is_preliminary) sep \
 	func(has_fbc) sep \
 	func(has_pipe_cxsr) sep \
@@ -663,6 +672,18 @@ struct i915_fbc {
 
 	bool false_color;
 
+	/* Tracks whether the HW is actually enabled, not whether the feature is
+	 * possible. */
+	bool enabled;
+
+	/* On gen8 some rings cannont perform fbc clean operation so for now
+	 * we are doing this on SW with mmio.
+	 * This variable works in the opposite information direction
+	 * of ring->fbc_dirty telling software on frontbuffer tracking
+	 * to perform the cache clean on sw side.
+	 */
+	bool need_sw_cache_clean;
+
 	struct intel_fbc_work {
 		struct delayed_work work;
 		struct drm_crtc *crtc;
@@ -704,6 +725,7 @@ enum intel_pch {
 	PCH_IBX,	/* Ibexpeak PCH */
 	PCH_CPT,	/* Cougarpoint PCH */
 	PCH_LPT,	/* Lynxpoint PCH */
+	PCH_SPT,        /* Sunrisepoint PCH */
 	PCH_NOP,
 };
 
@@ -1369,7 +1391,7 @@ struct ilk_wm_values {
  *
  * Our driver uses the autosuspend delay feature, which means we'll only really
  * suspend if we stay with zero refcount for a certain amount of time. The
- * default value is currently very conservative (see intel_init_runtime_pm), but
+ * default value is currently very conservative (see intel_runtime_pm_enable), but
  * it can be changed with the standard runtime PM files from sysfs.
  *
  * The irqs_disabled variable becomes true exactly after we disable the IRQs and
@@ -1382,7 +1404,7 @@ struct ilk_wm_values {
  */
 struct i915_runtime_pm {
 	bool suspended;
-	bool _irqs_disabled;
+	bool irqs_enabled;
 };
 
 enum intel_pipe_crc_source {
@@ -1509,7 +1531,7 @@ struct drm_i915_private {
 	struct intel_overlay *overlay;
 
 	/* backlight registers and fields in struct intel_panel */
-	spinlock_t backlight_lock;
+	struct mutex backlight_lock;
 
 	/* LVDS info */
 	bool no_aux_handshake;
@@ -2073,6 +2095,7 @@ struct drm_i915_cmd_table {
 #define IS_CHERRYVIEW(dev)	(INTEL_INFO(dev)->is_valleyview && IS_GEN8(dev))
 #define IS_HASWELL(dev)	(INTEL_INFO(dev)->is_haswell)
 #define IS_BROADWELL(dev)	(!INTEL_INFO(dev)->is_valleyview && IS_GEN8(dev))
+#define IS_SKYLAKE(dev)	(INTEL_INFO(dev)->is_skylake)
 #define IS_MOBILE(dev)		(INTEL_INFO(dev)->is_mobile)
 #define IS_HSW_EARLY_SDV(dev)	(IS_HASWELL(dev) && \
 				 (INTEL_DEVID(dev) & 0xFF00) == 0x0C00)
@@ -2080,6 +2103,8 @@ struct drm_i915_cmd_table {
 				 ((INTEL_DEVID(dev) & 0xf) == 0x2  || \
 				 (INTEL_DEVID(dev) & 0xf) == 0x6 || \
 				 (INTEL_DEVID(dev) & 0xf) == 0xe))
+#define IS_BDW_GT3(dev)		(IS_BROADWELL(dev) && \
+				 (INTEL_DEVID(dev) & 0x00F0) == 0x0020)
 #define IS_HSW_ULT(dev)		(IS_HASWELL(dev) && \
 				 (INTEL_DEVID(dev) & 0xFF00) == 0x0A00)
 #define IS_ULT(dev)		(IS_HSW_ULT(dev) || IS_BDW_ULT(dev))
@@ -2103,6 +2128,7 @@ struct drm_i915_cmd_table {
 #define IS_GEN6(dev)	(INTEL_INFO(dev)->gen == 6)
 #define IS_GEN7(dev)	(INTEL_INFO(dev)->gen == 7)
 #define IS_GEN8(dev)	(INTEL_INFO(dev)->gen == 8)
+#define IS_GEN9(dev)	(INTEL_INFO(dev)->gen == 9)
 
 #define RENDER_RING		(1<<RCS)
 #define BSD_RING		(1<<VCS)
@@ -2120,8 +2146,6 @@ struct drm_i915_cmd_table {
 
 #define HAS_HW_CONTEXTS(dev)	(INTEL_INFO(dev)->gen >= 6)
 #define HAS_LOGICAL_RING_CONTEXTS(dev)	(INTEL_INFO(dev)->gen >= 8)
-#define HAS_ALIASING_PPGTT(dev)	(INTEL_INFO(dev)->gen >= 6)
-#define HAS_PPGTT(dev)		(INTEL_INFO(dev)->gen >= 7 && !IS_GEN8(dev))
 #define USES_PPGTT(dev)		(i915.enable_ppgtt)
 #define USES_FULL_PPGTT(dev)	(i915.enable_ppgtt == 2)
 
@@ -2168,8 +2192,11 @@ struct drm_i915_cmd_table {
 #define INTEL_PCH_PPT_DEVICE_ID_TYPE		0x1e00
 #define INTEL_PCH_LPT_DEVICE_ID_TYPE		0x8c00
 #define INTEL_PCH_LPT_LP_DEVICE_ID_TYPE		0x9c00
+#define INTEL_PCH_SPT_DEVICE_ID_TYPE		0xA100
+#define INTEL_PCH_SPT_LP_DEVICE_ID_TYPE		0x9D00
 
 #define INTEL_PCH_TYPE(dev) (to_i915(dev)->pch_type)
+#define HAS_PCH_SPT(dev) (INTEL_PCH_TYPE(dev) == PCH_SPT)
 #define HAS_PCH_LPT(dev) (INTEL_PCH_TYPE(dev) == PCH_LPT)
 #define HAS_PCH_CPT(dev) (INTEL_PCH_TYPE(dev) == PCH_CPT)
 #define HAS_PCH_IBX(dev) (INTEL_PCH_TYPE(dev) == PCH_IBX)
@@ -2262,8 +2289,10 @@ void i915_handle_error(struct drm_device *dev, bool wedged,
 
 void gen6_set_pm_mask(struct drm_i915_private *dev_priv, u32 pm_iir,
 							int new_delay);
-extern void intel_irq_init(struct drm_device *dev);
-extern void intel_hpd_init(struct drm_device *dev);
+extern void intel_irq_init(struct drm_i915_private *dev_priv);
+extern void intel_hpd_init(struct drm_i915_private *dev_priv);
+int intel_irq_install(struct drm_i915_private *dev_priv);
+void intel_irq_uninstall(struct drm_i915_private *dev_priv);
 
 extern void intel_uncore_sanitize(struct drm_device *dev);
 extern void intel_uncore_early_sanitize(struct drm_device *dev,
@@ -2793,7 +2822,6 @@ static inline void intel_unregister_dsm_handler(void) { return; }
 
 /* modesetting */
 extern void intel_modeset_init_hw(struct drm_device *dev);
-extern void intel_modeset_suspend_hw(struct drm_device *dev);
 extern void intel_modeset_init(struct drm_device *dev);
 extern void intel_modeset_gem_init(struct drm_device *dev);
 extern void intel_modeset_cleanup(struct drm_device *dev);
@@ -2804,7 +2832,7 @@ extern void intel_modeset_setup_hw_state(struct drm_device *dev,
 extern void i915_redisable_vga(struct drm_device *dev);
 extern void i915_redisable_vga_power_on(struct drm_device *dev);
 extern bool intel_fbc_enabled(struct drm_device *dev);
-extern void gen8_fbc_sw_flush(struct drm_device *dev, u32 value);
+extern void bdw_fbc_sw_flush(struct drm_device *dev, u32 value);
 extern void intel_disable_fbc(struct drm_device *dev);
 extern bool ironlake_set_drps(struct drm_device *dev, u8 val);
 extern void intel_init_pch_refclk(struct drm_device *dev);

drivers/gpu/drm/i915/i915_gem.c

@@ -1945,7 +1945,14 @@ unsigned long
 i915_gem_shrink(struct drm_i915_private *dev_priv,
 		long target, unsigned flags)
 {
-	const bool purgeable_only = flags & I915_SHRINK_PURGEABLE;
+	const struct {
+		struct list_head *list;
+		unsigned int bit;
+	} phases[] = {
+		{ &dev_priv->mm.unbound_list, I915_SHRINK_UNBOUND },
+		{ &dev_priv->mm.bound_list, I915_SHRINK_BOUND },
+		{ NULL, 0 },
+	}, *phase;
 	unsigned long count = 0;
 
 	/*
@@ -1967,48 +1974,30 @@ i915_gem_shrink(struct drm_i915_private *dev_priv,
 	 * dev->struct_mutex and so we won't ever be able to observe an
 	 * object on the bound_list with a reference count equals 0.
 	 */
-	if (flags & I915_SHRINK_UNBOUND) {
+	for (phase = phases; phase->list; phase++) {
 		struct list_head still_in_list;
 
-		INIT_LIST_HEAD(&still_in_list);
-		while (count < target && !list_empty(&dev_priv->mm.unbound_list)) {
-			struct drm_i915_gem_object *obj;
-
-			obj = list_first_entry(&dev_priv->mm.unbound_list,
-					       typeof(*obj), global_list);
-			list_move_tail(&obj->global_list, &still_in_list);
-
-			if (!i915_gem_object_is_purgeable(obj) && purgeable_only)
-				continue;
-
-			drm_gem_object_reference(&obj->base);
-
-			if (i915_gem_object_put_pages(obj) == 0)
-				count += obj->base.size >> PAGE_SHIFT;
-
-			drm_gem_object_unreference(&obj->base);
-		}
-		list_splice(&still_in_list, &dev_priv->mm.unbound_list);
-	}
-
-	if (flags & I915_SHRINK_BOUND) {
-		struct list_head still_in_list;
+		if ((flags & phase->bit) == 0)
+			continue;
 
 		INIT_LIST_HEAD(&still_in_list);
-		while (count < target && !list_empty(&dev_priv->mm.bound_list)) {
+		while (count < target && !list_empty(phase->list)) {
 			struct drm_i915_gem_object *obj;
 			struct i915_vma *vma, *v;
 
-			obj = list_first_entry(&dev_priv->mm.bound_list,
+			obj = list_first_entry(phase->list,
 					       typeof(*obj), global_list);
 			list_move_tail(&obj->global_list, &still_in_list);
 
-			if (!i915_gem_object_is_purgeable(obj) && purgeable_only)
+			if (flags & I915_SHRINK_PURGEABLE &&
+			    !i915_gem_object_is_purgeable(obj))
 				continue;
 
 			drm_gem_object_reference(&obj->base);
 
-			list_for_each_entry_safe(vma, v, &obj->vma_list, vma_link)
+			/* For the unbound phase, this should be a no-op! */
+			list_for_each_entry_safe(vma, v,
+						 &obj->vma_list, vma_link)
 				if (i915_vma_unbind(vma))
 					break;
 
@@ -2017,7 +2006,7 @@ i915_gem_shrink(struct drm_i915_private *dev_priv,
 
 			drm_gem_object_unreference(&obj->base);
 		}
-		list_splice(&still_in_list, &dev_priv->mm.bound_list);
+		list_splice(&still_in_list, phase->list);
 	}
 
 	return count;
@@ -3166,6 +3155,7 @@ static void i915_gem_write_fence(struct drm_device *dev, int reg,
 	     obj->stride, obj->tiling_mode);
 
 	switch (INTEL_INFO(dev)->gen) {
+	case 9:
 	case 8:
 	case 7:
 	case 6:
@@ -3384,46 +3374,6 @@ static bool i915_gem_valid_gtt_space(struct i915_vma *vma,
 	return true;
 }
 
-static void i915_gem_verify_gtt(struct drm_device *dev)
-{
-#if WATCH_GTT
-	struct drm_i915_private *dev_priv = dev->dev_private;
-	struct drm_i915_gem_object *obj;
-	int err = 0;
-
-	list_for_each_entry(obj, &dev_priv->mm.gtt_list, global_list) {
-		if (obj->gtt_space == NULL) {
-			printk(KERN_ERR "object found on GTT list with no space reserved\n");
-			err++;
-			continue;
-		}
-
-		if (obj->cache_level != obj->gtt_space->color) {
-			printk(KERN_ERR "object reserved space [%08lx, %08lx] with wrong color, cache_level=%x, color=%lx\n",
-			       i915_gem_obj_ggtt_offset(obj),
-			       i915_gem_obj_ggtt_offset(obj) + i915_gem_obj_ggtt_size(obj),
-			       obj->cache_level,
-			       obj->gtt_space->color);
-			err++;
-			continue;
-		}
-
-		if (!i915_gem_valid_gtt_space(dev,
-					      obj->gtt_space,
-					      obj->cache_level)) {
-			printk(KERN_ERR "invalid GTT space found at [%08lx, %08lx] - color=%x\n",
-			       i915_gem_obj_ggtt_offset(obj),
-			       i915_gem_obj_ggtt_offset(obj) + i915_gem_obj_ggtt_size(obj),
-			       obj->cache_level);
-			err++;
-			continue;
-		}
-	}
-
-	WARN_ON(err);
-#endif
-}
-
 /**
  * Finds free space in the GTT aperture and binds the object there.
  */
@@ -3532,7 +3482,6 @@ search_free:
 	vma->bind_vma(vma, obj->cache_level,
 		      flags & (PIN_MAPPABLE | PIN_GLOBAL) ? GLOBAL_BIND : 0);
 
-	i915_gem_verify_gtt(dev);
 	return vma;
 
 err_remove_node:
@@ -3769,7 +3718,6 @@ int i915_gem_object_set_cache_level(struct drm_i915_gem_object *obj,
 						    old_write_domain);
 	}
 
-	i915_gem_verify_gtt(dev);
 	return 0;
 }
 
@@ -5119,6 +5067,15 @@ int i915_gem_open(struct drm_device *dev, struct drm_file *file)
 	return ret;
 }
 
+/**
+ * i915_gem_track_fb - update frontbuffer tracking
+ * old: current GEM buffer for the frontbuffer slots
+ * new: new GEM buffer for the frontbuffer slots
+ * frontbuffer_bits: bitmask of frontbuffer slots
+ *
+ * This updates the frontbuffer tracking bits @frontbuffer_bits by clearing them
+ * from @old and setting them in @new. Both @old and @new can be NULL.
+ */
 void i915_gem_track_fb(struct drm_i915_gem_object *old,
 		       struct drm_i915_gem_object *new,
 		       unsigned frontbuffer_bits)

drivers/gpu/drm/i915/i915_gem_gtt.c

@@ -35,13 +35,21 @@ static void chv_setup_private_ppat(struct drm_i915_private *dev_priv);
 
 static int sanitize_enable_ppgtt(struct drm_device *dev, int enable_ppgtt)
 {
-	if (enable_ppgtt == 0 || !HAS_ALIASING_PPGTT(dev))
+	bool has_aliasing_ppgtt;
+	bool has_full_ppgtt;
+
+	has_aliasing_ppgtt = INTEL_INFO(dev)->gen >= 6;
+	has_full_ppgtt = INTEL_INFO(dev)->gen >= 7;
+	if (IS_GEN8(dev))
+		has_full_ppgtt = false; /* XXX why? */
+
+	if (enable_ppgtt == 0 || !has_aliasing_ppgtt)
 		return 0;
 
 	if (enable_ppgtt == 1)
 		return 1;
 
-	if (enable_ppgtt == 2 && HAS_PPGTT(dev))
+	if (enable_ppgtt == 2 && has_full_ppgtt)
 		return 2;
 
 #ifdef CONFIG_INTEL_IOMMU
@@ -59,7 +67,7 @@ static int sanitize_enable_ppgtt(struct drm_device *dev, int enable_ppgtt)
 		return 0;
 	}
 
-	return HAS_ALIASING_PPGTT(dev) ? 1 : 0;
+	return has_aliasing_ppgtt ? 1 : 0;
 }
 
 
@@ -1092,7 +1100,7 @@ static int __hw_ppgtt_init(struct drm_device *dev, struct i915_hw_ppgtt *ppgtt)
 
 	if (INTEL_INFO(dev)->gen < 8)
 		return gen6_ppgtt_init(ppgtt);
-	else if (IS_GEN8(dev))
+	else if (IS_GEN8(dev) || IS_GEN9(dev))
 		return gen8_ppgtt_init(ppgtt, dev_priv->gtt.base.total);
 	else
 		BUG();
@@ -1764,7 +1772,6 @@ static int setup_scratch_page(struct drm_device *dev)
 	page = alloc_page(GFP_KERNEL | GFP_DMA32 | __GFP_ZERO);
 	if (page == NULL)
 		return -ENOMEM;
-	get_page(page);
 	set_pages_uc(page, 1);
 
 #ifdef CONFIG_INTEL_IOMMU
@@ -1789,7 +1796,6 @@ static void teardown_scratch_page(struct drm_device *dev)
 	set_pages_wb(page, 1);
 	pci_unmap_page(dev->pdev, dev_priv->gtt.base.scratch.addr,
 		       PAGE_SIZE, PCI_DMA_BIDIRECTIONAL);
-	put_page(page);
 	__free_page(page);
 }
 
@@ -1859,6 +1865,18 @@ static size_t chv_get_stolen_size(u16 gmch_ctrl)
 		return (gmch_ctrl - 0x17 + 9) << 22;
 }
 
+static size_t gen9_get_stolen_size(u16 gen9_gmch_ctl)
+{
+	gen9_gmch_ctl >>= BDW_GMCH_GMS_SHIFT;
+	gen9_gmch_ctl &= BDW_GMCH_GMS_MASK;
+
+	if (gen9_gmch_ctl < 0xf0)
+		return gen9_gmch_ctl << 25; /* 32 MB units */
+	else
+		/* 4MB increments starting at 0xf0 for 4MB */
+		return (gen9_gmch_ctl - 0xf0 + 1) << 22;
+}
+
 static int ggtt_probe_common(struct drm_device *dev,
 			     size_t gtt_size)
 {
@@ -1955,7 +1973,10 @@ static int gen8_gmch_probe(struct drm_device *dev,
 
 	pci_read_config_word(dev->pdev, SNB_GMCH_CTRL, &snb_gmch_ctl);
 
-	if (IS_CHERRYVIEW(dev)) {
+	if (INTEL_INFO(dev)->gen >= 9) {
+		*stolen = gen9_get_stolen_size(snb_gmch_ctl);
+		gtt_size = gen8_get_total_gtt_size(snb_gmch_ctl);
+	} else if (IS_CHERRYVIEW(dev)) {
 		*stolen = chv_get_stolen_size(snb_gmch_ctl);
 		gtt_size = chv_get_total_gtt_size(snb_gmch_ctl);
 	} else {
@@ -2127,6 +2148,7 @@ static struct i915_vma *__i915_gem_vma_create(struct drm_i915_gem_object *obj,
 	vma->obj = obj;
 
 	switch (INTEL_INFO(vm->dev)->gen) {
+	case 9:
 	case 8:
 	case 7:
 	case 6:

drivers/gpu/drm/i915/i915_gpu_error.c

@@ -765,6 +765,7 @@ static void i915_gem_record_fences(struct drm_device *dev,
 
 	/* Fences */
 	switch (INTEL_INFO(dev)->gen) {
+	case 9:
 	case 8:
 	case 7:
 	case 6:
@@ -923,6 +924,7 @@ static void i915_record_ring_state(struct drm_device *dev,
 		ering->vm_info.gfx_mode = I915_READ(RING_MODE_GEN7(ring));
 
 		switch (INTEL_INFO(dev)->gen) {
+		case 9:
 		case 8:
 			for (i = 0; i < 4; i++) {
 				ering->vm_info.pdp[i] =
@@ -1326,13 +1328,12 @@ void i915_error_state_get(struct drm_device *dev,
 			  struct i915_error_state_file_priv *error_priv)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
-	unsigned long flags;
 
-	spin_lock_irqsave(&dev_priv->gpu_error.lock, flags);
+	spin_lock_irq(&dev_priv->gpu_error.lock);
 	error_priv->error = dev_priv->gpu_error.first_error;
 	if (error_priv->error)
 		kref_get(&error_priv->error->ref);
-	spin_unlock_irqrestore(&dev_priv->gpu_error.lock, flags);
+	spin_unlock_irq(&dev_priv->gpu_error.lock);
 
 }
 
@@ -1346,12 +1347,11 @@ void i915_destroy_error_state(struct drm_device *dev)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	struct drm_i915_error_state *error;
-	unsigned long flags;
 
-	spin_lock_irqsave(&dev_priv->gpu_error.lock, flags);
+	spin_lock_irq(&dev_priv->gpu_error.lock);
 	error = dev_priv->gpu_error.first_error;
 	dev_priv->gpu_error.first_error = NULL;
-	spin_unlock_irqrestore(&dev_priv->gpu_error.lock, flags);
+	spin_unlock_irq(&dev_priv->gpu_error.lock);
 
 	if (error)
 		kref_put(&error->ref, i915_error_state_free);
@@ -1389,6 +1389,7 @@ void i915_get_extra_instdone(struct drm_device *dev, uint32_t *instdone)
 		WARN_ONCE(1, "Unsupported platform\n");
 	case 7:
 	case 8:
+	case 9:
 		instdone[0] = I915_READ(GEN7_INSTDONE_1);
 		instdone[1] = I915_READ(GEN7_SC_INSTDONE);
 		instdone[2] = I915_READ(GEN7_SAMPLER_INSTDONE);

drivers/gpu/drm/i915/i915_irq.c

@@ -37,6 +37,14 @@
 #include "i915_trace.h"
 #include "intel_drv.h"
 
+/**
+ * DOC: interrupt handling
+ *
+ * These functions provide the basic support for enabling and disabling the
+ * interrupt handling support. There's a lot more functionality in i915_irq.c
+ * and related files, but that will be described in separate chapters.
+ */
+
 static const u32 hpd_ibx[] = {
 	[HPD_CRT] = SDE_CRT_HOTPLUG,
 	[HPD_SDVO_B] = SDE_SDVOB_HOTPLUG,
@@ -310,9 +318,8 @@ void i9xx_check_fifo_underruns(struct drm_device *dev)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	struct intel_crtc *crtc;
-	unsigned long flags;
 
-	spin_lock_irqsave(&dev_priv->irq_lock, flags);
+	spin_lock_irq(&dev_priv->irq_lock);
 
 	for_each_intel_crtc(dev, crtc) {
 		u32 reg = PIPESTAT(crtc->pipe);
@@ -331,7 +338,7 @@ void i9xx_check_fifo_underruns(struct drm_device *dev)
 		DRM_ERROR("pipe %c underrun\n", pipe_name(crtc->pipe));
 	}
 
-	spin_unlock_irqrestore(&dev_priv->irq_lock, flags);
+	spin_unlock_irq(&dev_priv->irq_lock);
 }
 
 static void i9xx_set_fifo_underrun_reporting(struct drm_device *dev,
@@ -503,7 +510,7 @@ static bool __intel_set_cpu_fifo_underrun_reporting(struct drm_device *dev,
 		ironlake_set_fifo_underrun_reporting(dev, pipe, enable);
 	else if (IS_GEN7(dev))
 		ivybridge_set_fifo_underrun_reporting(dev, pipe, enable, old);
-	else if (IS_GEN8(dev))
+	else if (IS_GEN8(dev) || IS_GEN9(dev))
 		broadwell_set_fifo_underrun_reporting(dev, pipe, enable);
 
 	return old;
@@ -589,6 +596,7 @@ __i915_enable_pipestat(struct drm_i915_private *dev_priv, enum pipe pipe,
 	u32 pipestat = I915_READ(reg) & PIPESTAT_INT_ENABLE_MASK;
 
 	assert_spin_locked(&dev_priv->irq_lock);
+	WARN_ON(!intel_irqs_enabled(dev_priv));
 
 	if (WARN_ONCE(enable_mask & ~PIPESTAT_INT_ENABLE_MASK ||
 		      status_mask & ~PIPESTAT_INT_STATUS_MASK,
@@ -615,6 +623,7 @@ __i915_disable_pipestat(struct drm_i915_private *dev_priv, enum pipe pipe,
 	u32 pipestat = I915_READ(reg) & PIPESTAT_INT_ENABLE_MASK;
 
 	assert_spin_locked(&dev_priv->irq_lock);
+	WARN_ON(!intel_irqs_enabled(dev_priv));
 
 	if (WARN_ONCE(enable_mask & ~PIPESTAT_INT_ENABLE_MASK ||
 		      status_mask & ~PIPESTAT_INT_STATUS_MASK,
@@ -694,19 +703,18 @@ i915_disable_pipestat(struct drm_i915_private *dev_priv, enum pipe pipe,
 static void i915_enable_asle_pipestat(struct drm_device *dev)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
-	unsigned long irqflags;
 
 	if (!dev_priv->opregion.asle || !IS_MOBILE(dev))
 		return;
 
-	spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
+	spin_lock_irq(&dev_priv->irq_lock);
 
 	i915_enable_pipestat(dev_priv, PIPE_B, PIPE_LEGACY_BLC_EVENT_STATUS);
 	if (INTEL_INFO(dev)->gen >= 4)
 		i915_enable_pipestat(dev_priv, PIPE_A,
 				     PIPE_LEGACY_BLC_EVENT_STATUS);
 
-	spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
+	spin_unlock_irq(&dev_priv->irq_lock);
 }
 
 /**
@@ -1094,18 +1102,17 @@ static void i915_digport_work_func(struct work_struct *work)
 {
 	struct drm_i915_private *dev_priv =
 		container_of(work, struct drm_i915_private, dig_port_work);
-	unsigned long irqflags;
 	u32 long_port_mask, short_port_mask;
 	struct intel_digital_port *intel_dig_port;
 	int i, ret;
 	u32 old_bits = 0;
 
-	spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
+	spin_lock_irq(&dev_priv->irq_lock);
 	long_port_mask = dev_priv->long_hpd_port_mask;
 	dev_priv->long_hpd_port_mask = 0;
 	short_port_mask = dev_priv->short_hpd_port_mask;
 	dev_priv->short_hpd_port_mask = 0;
-	spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
+	spin_unlock_irq(&dev_priv->irq_lock);
 
 	for (i = 0; i < I915_MAX_PORTS; i++) {
 		bool valid = false;
@@ -1130,9 +1137,9 @@ static void i915_digport_work_func(struct work_struct *work)
 	}
 
 	if (old_bits) {
-		spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
+		spin_lock_irq(&dev_priv->irq_lock);
 		dev_priv->hpd_event_bits |= old_bits;
-		spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
+		spin_unlock_irq(&dev_priv->irq_lock);
 		schedule_work(&dev_priv->hotplug_work);
 	}
 }
@@ -1151,7 +1158,6 @@ static void i915_hotplug_work_func(struct work_struct *work)
 	struct intel_connector *intel_connector;
 	struct intel_encoder *intel_encoder;
 	struct drm_connector *connector;
-	unsigned long irqflags;
 	bool hpd_disabled = false;
 	bool changed = false;
 	u32 hpd_event_bits;
@@ -1159,7 +1165,7 @@ static void i915_hotplug_work_func(struct work_struct *work)
 	mutex_lock(&mode_config->mutex);
 	DRM_DEBUG_KMS("running encoder hotplug functions\n");
 
-	spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
+	spin_lock_irq(&dev_priv->irq_lock);
 
 	hpd_event_bits = dev_priv->hpd_event_bits;
 	dev_priv->hpd_event_bits = 0;
@@ -1193,7 +1199,7 @@ static void i915_hotplug_work_func(struct work_struct *work)
 				 msecs_to_jiffies(I915_REENABLE_HOTPLUG_DELAY));
 	}
 
-	spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
+	spin_unlock_irq(&dev_priv->irq_lock);
 
 	list_for_each_entry(connector, &mode_config->connector_list, head) {
 		intel_connector = to_intel_connector(connector);
@@ -1488,7 +1494,6 @@ static void ivybridge_parity_work(struct work_struct *work)
 	u32 error_status, row, bank, subbank;
 	char *parity_event[6];
 	uint32_t misccpctl;
-	unsigned long flags;
 	uint8_t slice = 0;
 
 	/* We must turn off DOP level clock gating to access the L3 registers.
@@ -1547,9 +1552,9 @@ static void ivybridge_parity_work(struct work_struct *work)
 
 out:
 	WARN_ON(dev_priv->l3_parity.which_slice);
-	spin_lock_irqsave(&dev_priv->irq_lock, flags);
+	spin_lock_irq(&dev_priv->irq_lock);
 	gen5_enable_gt_irq(dev_priv, GT_PARITY_ERROR(dev_priv->dev));
-	spin_unlock_irqrestore(&dev_priv->irq_lock, flags);
+	spin_unlock_irq(&dev_priv->irq_lock);
 
 	mutex_unlock(&dev_priv->dev->struct_mutex);
 }
@@ -2566,7 +2571,7 @@ static irqreturn_t gen8_irq_handler(int irq, void *arg)
 	}
 
 	for_each_pipe(dev_priv, pipe) {
-		uint32_t pipe_iir;
+		uint32_t pipe_iir, flip_done = 0, fault_errors = 0;
 
 		if (!(master_ctl & GEN8_DE_PIPE_IRQ(pipe)))
 			continue;
@@ -2575,11 +2580,17 @@ static irqreturn_t gen8_irq_handler(int irq, void *arg)
 		if (pipe_iir) {
 			ret = IRQ_HANDLED;
 			I915_WRITE(GEN8_DE_PIPE_IIR(pipe), pipe_iir);
+
 			if (pipe_iir & GEN8_PIPE_VBLANK &&
 			    intel_pipe_handle_vblank(dev, pipe))
 				intel_check_page_flip(dev, pipe);
 
-			if (pipe_iir & GEN8_PIPE_PRIMARY_FLIP_DONE) {
+			if (IS_GEN9(dev))
+				flip_done = pipe_iir & GEN9_PIPE_PLANE1_FLIP_DONE;
+			else
+				flip_done = pipe_iir & GEN8_PIPE_PRIMARY_FLIP_DONE;
+
+			if (flip_done) {
 				intel_prepare_page_flip(dev, pipe);
 				intel_finish_page_flip_plane(dev, pipe);
 			}
@@ -2594,11 +2605,16 @@ static irqreturn_t gen8_irq_handler(int irq, void *arg)
 						  pipe_name(pipe));
 			}
 
-			if (pipe_iir & GEN8_DE_PIPE_IRQ_FAULT_ERRORS) {
+
+			if (IS_GEN9(dev))
+				fault_errors = pipe_iir & GEN9_DE_PIPE_IRQ_FAULT_ERRORS;
+			else
+				fault_errors = pipe_iir & GEN8_DE_PIPE_IRQ_FAULT_ERRORS;
+
+			if (fault_errors)
 				DRM_ERROR("Fault errors on pipe %c\n: 0x%08x",
 					  pipe_name(pipe),
 					  pipe_iir & GEN8_DE_PIPE_IRQ_FAULT_ERRORS);
-			}
 		} else
 			DRM_ERROR("The master control interrupt lied (DE PIPE)!\n");
 	}
@@ -3444,8 +3460,8 @@ static void gen8_irq_reset(struct drm_device *dev)
 	gen8_gt_irq_reset(dev_priv);
 
 	for_each_pipe(dev_priv, pipe)
-		if (intel_display_power_enabled(dev_priv,
-						POWER_DOMAIN_PIPE(pipe)))
+		if (intel_display_power_is_enabled(dev_priv,
+						   POWER_DOMAIN_PIPE(pipe)))
 			GEN8_IRQ_RESET_NDX(DE_PIPE, pipe);
 
 	GEN5_IRQ_RESET(GEN8_DE_PORT_);
@@ -3457,15 +3473,14 @@ static void gen8_irq_reset(struct drm_device *dev)
 
 void gen8_irq_power_well_post_enable(struct drm_i915_private *dev_priv)
 {
-	unsigned long irqflags;
 	uint32_t extra_ier = GEN8_PIPE_VBLANK | GEN8_PIPE_FIFO_UNDERRUN;
 
-	spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
+	spin_lock_irq(&dev_priv->irq_lock);
 	GEN8_IRQ_INIT_NDX(DE_PIPE, PIPE_B, dev_priv->de_irq_mask[PIPE_B],
 			  ~dev_priv->de_irq_mask[PIPE_B] | extra_ier);
 	GEN8_IRQ_INIT_NDX(DE_PIPE, PIPE_C, dev_priv->de_irq_mask[PIPE_C],
 			  ~dev_priv->de_irq_mask[PIPE_C] | extra_ier);
-	spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
+	spin_unlock_irq(&dev_priv->irq_lock);
 }
 
 static void cherryview_irq_preinstall(struct drm_device *dev)
@@ -3584,7 +3599,6 @@ static void gen5_gt_irq_postinstall(struct drm_device *dev)
 
 static int ironlake_irq_postinstall(struct drm_device *dev)
 {
-	unsigned long irqflags;
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	u32 display_mask, extra_mask;
 
@@ -3623,9 +3637,9 @@ static int ironlake_irq_postinstall(struct drm_device *dev)
 		 * spinlocking not required here for correctness since interrupt
 		 * setup is guaranteed to run in single-threaded context. But we
 		 * need it to make the assert_spin_locked happy. */
-		spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
+		spin_lock_irq(&dev_priv->irq_lock);
 		ironlake_enable_display_irq(dev_priv, DE_PCU_EVENT);
-		spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
+		spin_unlock_irq(&dev_priv->irq_lock);
 	}
 
 	return 0;
@@ -3701,7 +3715,7 @@ void valleyview_enable_display_irqs(struct drm_i915_private *dev_priv)
 
 	dev_priv->display_irqs_enabled = true;
 
-	if (dev_priv->dev->irq_enabled)
+	if (intel_irqs_enabled(dev_priv))
 		valleyview_display_irqs_install(dev_priv);
 }
 
@@ -3714,14 +3728,13 @@ void valleyview_disable_display_irqs(struct drm_i915_private *dev_priv)
 
 	dev_priv->display_irqs_enabled = false;
 
-	if (dev_priv->dev->irq_enabled)
+	if (intel_irqs_enabled(dev_priv))
 		valleyview_display_irqs_uninstall(dev_priv);
 }
 
 static int valleyview_irq_postinstall(struct drm_device *dev)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
-	unsigned long irqflags;
 
 	dev_priv->irq_mask = ~0;
 
@@ -3735,10 +3748,10 @@ static int valleyview_irq_postinstall(struct drm_device *dev)
 
 	/* Interrupt setup is already guaranteed to be single-threaded, this is
 	 * just to make the assert_spin_locked check happy. */
-	spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
+	spin_lock_irq(&dev_priv->irq_lock);
 	if (dev_priv->display_irqs_enabled)
 		valleyview_display_irqs_install(dev_priv);
-	spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
+	spin_unlock_irq(&dev_priv->irq_lock);
 
 	I915_WRITE(VLV_IIR, 0xffffffff);
 	I915_WRITE(VLV_IIR, 0xffffffff);
@@ -3783,18 +3796,26 @@ static void gen8_gt_irq_postinstall(struct drm_i915_private *dev_priv)
 
 static void gen8_de_irq_postinstall(struct drm_i915_private *dev_priv)
 {
-	uint32_t de_pipe_masked = GEN8_PIPE_PRIMARY_FLIP_DONE |
-		GEN8_PIPE_CDCLK_CRC_DONE |
-		GEN8_DE_PIPE_IRQ_FAULT_ERRORS;
-	uint32_t de_pipe_enables = de_pipe_masked | GEN8_PIPE_VBLANK |
-		GEN8_PIPE_FIFO_UNDERRUN;
+	uint32_t de_pipe_masked = GEN8_PIPE_CDCLK_CRC_DONE;
+	uint32_t de_pipe_enables;
 	int pipe;
+
+	if (IS_GEN9(dev_priv))
+		de_pipe_masked |= GEN9_PIPE_PLANE1_FLIP_DONE |
+				  GEN9_DE_PIPE_IRQ_FAULT_ERRORS;
+	else
+		de_pipe_masked |= GEN8_PIPE_PRIMARY_FLIP_DONE |
+				  GEN8_DE_PIPE_IRQ_FAULT_ERRORS;
+
+	de_pipe_enables = de_pipe_masked | GEN8_PIPE_VBLANK |
+					   GEN8_PIPE_FIFO_UNDERRUN;
+
 	dev_priv->de_irq_mask[PIPE_A] = ~de_pipe_masked;
 	dev_priv->de_irq_mask[PIPE_B] = ~de_pipe_masked;
 	dev_priv->de_irq_mask[PIPE_C] = ~de_pipe_masked;
 
 	for_each_pipe(dev_priv, pipe)
-		if (intel_display_power_enabled(dev_priv,
+		if (intel_display_power_is_enabled(dev_priv,
 				POWER_DOMAIN_PIPE(pipe)))
 			GEN8_IRQ_INIT_NDX(DE_PIPE, pipe,
 					  dev_priv->de_irq_mask[pipe],
@@ -3829,7 +3850,6 @@ static int cherryview_irq_postinstall(struct drm_device *dev)
 		I915_DISPLAY_PIPE_C_EVENT_INTERRUPT;
 	u32 pipestat_enable = PLANE_FLIP_DONE_INT_STATUS_VLV |
 		PIPE_CRC_DONE_INTERRUPT_STATUS;
-	unsigned long irqflags;
 	int pipe;
 
 	/*
@@ -3841,11 +3861,11 @@ static int cherryview_irq_postinstall(struct drm_device *dev)
 	for_each_pipe(dev_priv, pipe)
 		I915_WRITE(PIPESTAT(pipe), 0xffff);
 
-	spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
+	spin_lock_irq(&dev_priv->irq_lock);
 	i915_enable_pipestat(dev_priv, PIPE_A, PIPE_GMBUS_INTERRUPT_STATUS);
 	for_each_pipe(dev_priv, pipe)
 		i915_enable_pipestat(dev_priv, pipe, pipestat_enable);
-	spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
+	spin_unlock_irq(&dev_priv->irq_lock);
 
 	I915_WRITE(VLV_IIR, 0xffffffff);
 	I915_WRITE(VLV_IMR, dev_priv->irq_mask);
@@ -3872,7 +3892,6 @@ static void gen8_irq_uninstall(struct drm_device *dev)
 static void valleyview_irq_uninstall(struct drm_device *dev)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
-	unsigned long irqflags;
 	int pipe;
 
 	if (!dev_priv)
@@ -3887,10 +3906,12 @@ static void valleyview_irq_uninstall(struct drm_device *dev)
 	I915_WRITE(PORT_HOTPLUG_EN, 0);
 	I915_WRITE(PORT_HOTPLUG_STAT, I915_READ(PORT_HOTPLUG_STAT));
 
-	spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
+	/* Interrupt setup is already guaranteed to be single-threaded, this is
+	 * just to make the assert_spin_locked check happy. */
+	spin_lock_irq(&dev_priv->irq_lock);
 	if (dev_priv->display_irqs_enabled)
 		valleyview_display_irqs_uninstall(dev_priv);
-	spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
+	spin_unlock_irq(&dev_priv->irq_lock);
 
 	dev_priv->irq_mask = 0;
 
@@ -3976,7 +3997,6 @@ static void i8xx_irq_preinstall(struct drm_device * dev)
 static int i8xx_irq_postinstall(struct drm_device *dev)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
-	unsigned long irqflags;
 
 	I915_WRITE16(EMR,
 		     ~(I915_ERROR_PAGE_TABLE | I915_ERROR_MEMORY_REFRESH));
@@ -3999,10 +4019,10 @@ static int i8xx_irq_postinstall(struct drm_device *dev)
 
 	/* Interrupt setup is already guaranteed to be single-threaded, this is
 	 * just to make the assert_spin_locked check happy. */
-	spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
+	spin_lock_irq(&dev_priv->irq_lock);
 	i915_enable_pipestat(dev_priv, PIPE_A, PIPE_CRC_DONE_INTERRUPT_STATUS);
 	i915_enable_pipestat(dev_priv, PIPE_B, PIPE_CRC_DONE_INTERRUPT_STATUS);
-	spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
+	spin_unlock_irq(&dev_priv->irq_lock);
 
 	return 0;
 }
@@ -4047,7 +4067,6 @@ static irqreturn_t i8xx_irq_handler(int irq, void *arg)
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	u16 iir, new_iir;
 	u32 pipe_stats[2];
-	unsigned long irqflags;
 	int pipe;
 	u16 flip_mask =
 		I915_DISPLAY_PLANE_A_FLIP_PENDING_INTERRUPT |
@@ -4063,7 +4082,7 @@ static irqreturn_t i8xx_irq_handler(int irq, void *arg)
 		 * It doesn't set the bit in iir again, but it still produces
 		 * interrupts (for non-MSI).
 		 */
-		spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
+		spin_lock(&dev_priv->irq_lock);
 		if (iir & I915_RENDER_COMMAND_PARSER_ERROR_INTERRUPT)
 			i915_handle_error(dev, false,
 					  "Command parser error, iir 0x%08x",
@@ -4079,7 +4098,7 @@ static irqreturn_t i8xx_irq_handler(int irq, void *arg)
 			if (pipe_stats[pipe] & 0x8000ffff)
 				I915_WRITE(reg, pipe_stats[pipe]);
 		}
-		spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
+		spin_unlock(&dev_priv->irq_lock);
 
 		I915_WRITE16(IIR, iir & ~flip_mask);
 		new_iir = I915_READ16(IIR); /* Flush posted writes */
@@ -4149,7 +4168,6 @@ static int i915_irq_postinstall(struct drm_device *dev)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	u32 enable_mask;
-	unsigned long irqflags;
 
 	I915_WRITE(EMR, ~(I915_ERROR_PAGE_TABLE | I915_ERROR_MEMORY_REFRESH));
 
@@ -4187,10 +4205,10 @@ static int i915_irq_postinstall(struct drm_device *dev)
 
 	/* Interrupt setup is already guaranteed to be single-threaded, this is
 	 * just to make the assert_spin_locked check happy. */
-	spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
+	spin_lock_irq(&dev_priv->irq_lock);
 	i915_enable_pipestat(dev_priv, PIPE_A, PIPE_CRC_DONE_INTERRUPT_STATUS);
 	i915_enable_pipestat(dev_priv, PIPE_B, PIPE_CRC_DONE_INTERRUPT_STATUS);
-	spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
+	spin_unlock_irq(&dev_priv->irq_lock);
 
 	return 0;
 }
@@ -4234,7 +4252,6 @@ static irqreturn_t i915_irq_handler(int irq, void *arg)
 	struct drm_device *dev = arg;
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	u32 iir, new_iir, pipe_stats[I915_MAX_PIPES];
-	unsigned long irqflags;
 	u32 flip_mask =
 		I915_DISPLAY_PLANE_A_FLIP_PENDING_INTERRUPT |
 		I915_DISPLAY_PLANE_B_FLIP_PENDING_INTERRUPT;
@@ -4250,7 +4267,7 @@ static irqreturn_t i915_irq_handler(int irq, void *arg)
 		 * It doesn't set the bit in iir again, but it still produces
 		 * interrupts (for non-MSI).
 		 */
-		spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
+		spin_lock(&dev_priv->irq_lock);
 		if (iir & I915_RENDER_COMMAND_PARSER_ERROR_INTERRUPT)
 			i915_handle_error(dev, false,
 					  "Command parser error, iir 0x%08x",
@@ -4266,7 +4283,7 @@ static irqreturn_t i915_irq_handler(int irq, void *arg)
 				irq_received = true;
 			}
 		}
-		spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
+		spin_unlock(&dev_priv->irq_lock);
 
 		if (!irq_received)
 			break;
@@ -4372,7 +4389,6 @@ static int i965_irq_postinstall(struct drm_device *dev)
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	u32 enable_mask;
 	u32 error_mask;
-	unsigned long irqflags;
 
 	/* Unmask the interrupts that we always want on. */
 	dev_priv->irq_mask = ~(I915_ASLE_INTERRUPT |
@@ -4393,11 +4409,11 @@ static int i965_irq_postinstall(struct drm_device *dev)
 
 	/* Interrupt setup is already guaranteed to be single-threaded, this is
 	 * just to make the assert_spin_locked check happy. */
-	spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
+	spin_lock_irq(&dev_priv->irq_lock);
 	i915_enable_pipestat(dev_priv, PIPE_A, PIPE_GMBUS_INTERRUPT_STATUS);
 	i915_enable_pipestat(dev_priv, PIPE_A, PIPE_CRC_DONE_INTERRUPT_STATUS);
 	i915_enable_pipestat(dev_priv, PIPE_B, PIPE_CRC_DONE_INTERRUPT_STATUS);
-	spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
+	spin_unlock_irq(&dev_priv->irq_lock);
 
 	/*
 	 * Enable some error detection, note the instruction error mask
@@ -4462,7 +4478,6 @@ static irqreturn_t i965_irq_handler(int irq, void *arg)
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	u32 iir, new_iir;
 	u32 pipe_stats[I915_MAX_PIPES];
-	unsigned long irqflags;
 	int ret = IRQ_NONE, pipe;
 	u32 flip_mask =
 		I915_DISPLAY_PLANE_A_FLIP_PENDING_INTERRUPT |
@@ -4479,7 +4494,7 @@ static irqreturn_t i965_irq_handler(int irq, void *arg)
 		 * It doesn't set the bit in iir again, but it still produces
 		 * interrupts (for non-MSI).
 		 */
-		spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
+		spin_lock(&dev_priv->irq_lock);
 		if (iir & I915_RENDER_COMMAND_PARSER_ERROR_INTERRUPT)
 			i915_handle_error(dev, false,
 					  "Command parser error, iir 0x%08x",
@@ -4497,7 +4512,7 @@ static irqreturn_t i965_irq_handler(int irq, void *arg)
 				irq_received = true;
 			}
 		}
-		spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
+		spin_unlock(&dev_priv->irq_lock);
 
 		if (!irq_received)
 			break;
@@ -4584,19 +4599,18 @@ static void i965_irq_uninstall(struct drm_device * dev)
 	I915_WRITE(IIR, I915_READ(IIR));
 }
 
-static void intel_hpd_irq_reenable(struct work_struct *work)
+static void intel_hpd_irq_reenable_work(struct work_struct *work)
 {
 	struct drm_i915_private *dev_priv =
 		container_of(work, typeof(*dev_priv),
 			     hotplug_reenable_work.work);
 	struct drm_device *dev = dev_priv->dev;
 	struct drm_mode_config *mode_config = &dev->mode_config;
-	unsigned long irqflags;
 	int i;
 
 	intel_runtime_pm_get(dev_priv);
 
-	spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
+	spin_lock_irq(&dev_priv->irq_lock);
 	for (i = (HPD_NONE + 1); i < HPD_NUM_PINS; i++) {
 		struct drm_connector *connector;
 
@@ -4620,14 +4634,21 @@ static void intel_hpd_irq_reenable(struct work_struct *work)
 	}
 	if (dev_priv->display.hpd_irq_setup)
 		dev_priv->display.hpd_irq_setup(dev);
-	spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
+	spin_unlock_irq(&dev_priv->irq_lock);
 
 	intel_runtime_pm_put(dev_priv);
 }
 
-void intel_irq_init(struct drm_device *dev)
+/**
+ * intel_irq_init - initializes irq support
+ * @dev_priv: i915 device instance
+ *
+ * This function initializes all the irq support including work items, timers
+ * and all the vtables. It does not setup the interrupt itself though.
+ */
+void intel_irq_init(struct drm_i915_private *dev_priv)
 {
-	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct drm_device *dev = dev_priv->dev;
 
 	INIT_WORK(&dev_priv->hotplug_work, i915_hotplug_work_func);
 	INIT_WORK(&dev_priv->dig_port_work, i915_digport_work_func);
@@ -4636,7 +4657,7 @@ void intel_irq_init(struct drm_device *dev)
 	INIT_WORK(&dev_priv->l3_parity.error_work, ivybridge_parity_work);
 
 	/* Let's track the enabled rps events */
-	if (IS_VALLEYVIEW(dev) && !IS_CHERRYVIEW(dev))
+	if (IS_VALLEYVIEW(dev_priv) && !IS_CHERRYVIEW(dev_priv))
 		/* WaGsvRC0ResidencyMethod:vlv */
 		dev_priv->pm_rps_events = GEN6_PM_RP_UP_EI_EXPIRED;
 	else
@@ -4646,17 +4667,14 @@ void intel_irq_init(struct drm_device *dev)
 		    i915_hangcheck_elapsed,
 		    (unsigned long) dev);
 	INIT_DELAYED_WORK(&dev_priv->hotplug_reenable_work,
-			  intel_hpd_irq_reenable);
+			  intel_hpd_irq_reenable_work);
 
 	pm_qos_add_request(&dev_priv->pm_qos, PM_QOS_CPU_DMA_LATENCY, PM_QOS_DEFAULT_VALUE);
 
-	/* Haven't installed the IRQ handler yet */
-	dev_priv->pm._irqs_disabled = true;
-
-	if (IS_GEN2(dev)) {
+	if (IS_GEN2(dev_priv)) {
 		dev->max_vblank_count = 0;
 		dev->driver->get_vblank_counter = i8xx_get_vblank_counter;
-	} else if (IS_G4X(dev) || INTEL_INFO(dev)->gen >= 5) {
+	} else if (IS_G4X(dev_priv) || INTEL_INFO(dev_priv)->gen >= 5) {
 		dev->max_vblank_count = 0xffffffff; /* full 32 bit counter */
 		dev->driver->get_vblank_counter = gm45_get_vblank_counter;
 	} else {
@@ -4669,7 +4687,7 @@ void intel_irq_init(struct drm_device *dev)
 	 * Gen2 doesn't have a hardware frame counter and so depends on
 	 * vblank interrupts to produce sane vblank seuquence numbers.
 	 */
-	if (!IS_GEN2(dev))
+	if (!IS_GEN2(dev_priv))
 		dev->vblank_disable_immediate = true;
 
 	if (drm_core_check_feature(dev, DRIVER_MODESET)) {
@@ -4677,7 +4695,7 @@ void intel_irq_init(struct drm_device *dev)
 		dev->driver->get_scanout_position = i915_get_crtc_scanoutpos;
 	}
 
-	if (IS_CHERRYVIEW(dev)) {
+	if (IS_CHERRYVIEW(dev_priv)) {
 		dev->driver->irq_handler = cherryview_irq_handler;
 		dev->driver->irq_preinstall = cherryview_irq_preinstall;
 		dev->driver->irq_postinstall = cherryview_irq_postinstall;
@@ -4685,7 +4703,7 @@ void intel_irq_init(struct drm_device *dev)
 		dev->driver->enable_vblank = valleyview_enable_vblank;
 		dev->driver->disable_vblank = valleyview_disable_vblank;
 		dev_priv->display.hpd_irq_setup = i915_hpd_irq_setup;
-	} else if (IS_VALLEYVIEW(dev)) {
+	} else if (IS_VALLEYVIEW(dev_priv)) {
 		dev->driver->irq_handler = valleyview_irq_handler;
 		dev->driver->irq_preinstall = valleyview_irq_preinstall;
 		dev->driver->irq_postinstall = valleyview_irq_postinstall;
@@ -4693,7 +4711,7 @@ void intel_irq_init(struct drm_device *dev)
 		dev->driver->enable_vblank = valleyview_enable_vblank;
 		dev->driver->disable_vblank = valleyview_disable_vblank;
 		dev_priv->display.hpd_irq_setup = i915_hpd_irq_setup;
-	} else if (IS_GEN8(dev)) {
+	} else if (INTEL_INFO(dev_priv)->gen >= 8) {
 		dev->driver->irq_handler = gen8_irq_handler;
 		dev->driver->irq_preinstall = gen8_irq_reset;
 		dev->driver->irq_postinstall = gen8_irq_postinstall;
@@ -4710,12 +4728,12 @@ void intel_irq_init(struct drm_device *dev)
 		dev->driver->disable_vblank = ironlake_disable_vblank;
 		dev_priv->display.hpd_irq_setup = ibx_hpd_irq_setup;
 	} else {
-		if (INTEL_INFO(dev)->gen == 2) {
+		if (INTEL_INFO(dev_priv)->gen == 2) {
 			dev->driver->irq_preinstall = i8xx_irq_preinstall;
 			dev->driver->irq_postinstall = i8xx_irq_postinstall;
 			dev->driver->irq_handler = i8xx_irq_handler;
 			dev->driver->irq_uninstall = i8xx_irq_uninstall;
-		} else if (INTEL_INFO(dev)->gen == 3) {
+		} else if (INTEL_INFO(dev_priv)->gen == 3) {
 			dev->driver->irq_preinstall = i915_irq_preinstall;
 			dev->driver->irq_postinstall = i915_irq_postinstall;
 			dev->driver->irq_uninstall = i915_irq_uninstall;
@@ -4733,12 +4751,23 @@ void intel_irq_init(struct drm_device *dev)
 	}
 }
 
-void intel_hpd_init(struct drm_device *dev)
+/**
+ * intel_hpd_init - initializes and enables hpd support
+ * @dev_priv: i915 device instance
+ *
+ * This function enables the hotplug support. It requires that interrupts have
+ * already been enabled with intel_irq_init_hw(). From this point on hotplug and
+ * poll request can run concurrently to other code, so locking rules must be
+ * obeyed.
+ *
+ * This is a separate step from interrupt enabling to simplify the locking rules
+ * in the driver load and resume code.
+ */
+void intel_hpd_init(struct drm_i915_private *dev_priv)
 {
-	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct drm_device *dev = dev_priv->dev;
 	struct drm_mode_config *mode_config = &dev->mode_config;
 	struct drm_connector *connector;
-	unsigned long irqflags;
 	int i;
 
 	for (i = 1; i < HPD_NUM_PINS; i++) {
@@ -4756,27 +4785,72 @@ void intel_hpd_init(struct drm_device *dev)
 
 	/* Interrupt setup is already guaranteed to be single-threaded, this is
 	 * just to make the assert_spin_locked checks happy. */
-	spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
+	spin_lock_irq(&dev_priv->irq_lock);
 	if (dev_priv->display.hpd_irq_setup)
 		dev_priv->display.hpd_irq_setup(dev);
-	spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
+	spin_unlock_irq(&dev_priv->irq_lock);
 }
 
-/* Disable interrupts so we can allow runtime PM. */
-void intel_runtime_pm_disable_interrupts(struct drm_device *dev)
+/**
+ * intel_irq_install - enables the hardware interrupt
+ * @dev_priv: i915 device instance
+ *
+ * This function enables the hardware interrupt handling, but leaves the hotplug
+ * handling still disabled. It is called after intel_irq_init().
+ *
+ * In the driver load and resume code we need working interrupts in a few places
+ * but don't want to deal with the hassle of concurrent probe and hotplug
+ * workers. Hence the split into this two-stage approach.
+ */
+int intel_irq_install(struct drm_i915_private *dev_priv)
 {
-	struct drm_i915_private *dev_priv = dev->dev_private;
+	/*
+	 * We enable some interrupt sources in our postinstall hooks, so mark
+	 * interrupts as enabled _before_ actually enabling them to avoid
+	 * special cases in our ordering checks.
+	 */
+	dev_priv->pm.irqs_enabled = true;
 
-	dev->driver->irq_uninstall(dev);
-	dev_priv->pm._irqs_disabled = true;
+	return drm_irq_install(dev_priv->dev, dev_priv->dev->pdev->irq);
 }
 
-/* Restore interrupts so we can recover from runtime PM. */
-void intel_runtime_pm_restore_interrupts(struct drm_device *dev)
+/**
+ * intel_irq_uninstall - finilizes all irq handling
+ * @dev_priv: i915 device instance
+ *
+ * This stops interrupt and hotplug handling and unregisters and frees all
+ * resources acquired in the init functions.
+ */
+void intel_irq_uninstall(struct drm_i915_private *dev_priv)
 {
-	struct drm_i915_private *dev_priv = dev->dev_private;
+	drm_irq_uninstall(dev_priv->dev);
+	intel_hpd_cancel_work(dev_priv);
+	dev_priv->pm.irqs_enabled = false;
+}
+
+/**
+ * intel_runtime_pm_disable_interrupts - runtime interrupt disabling
+ * @dev_priv: i915 device instance
+ *
+ * This function is used to disable interrupts at runtime, both in the runtime
+ * pm and the system suspend/resume code.
+ */
+void intel_runtime_pm_disable_interrupts(struct drm_i915_private *dev_priv)
+{
+	dev_priv->dev->driver->irq_uninstall(dev_priv->dev);
+	dev_priv->pm.irqs_enabled = false;
+}
 
-	dev_priv->pm._irqs_disabled = false;
-	dev->driver->irq_preinstall(dev);
-	dev->driver->irq_postinstall(dev);
+/**
+ * intel_runtime_pm_enable_interrupts - runtime interrupt enabling
+ * @dev_priv: i915 device instance
+ *
+ * This function is used to enable interrupts at runtime, both in the runtime
+ * pm and the system suspend/resume code.
+ */
+void intel_runtime_pm_enable_interrupts(struct drm_i915_private *dev_priv)
+{
+	dev_priv->pm.irqs_enabled = true;
+	dev_priv->dev->driver->irq_preinstall(dev_priv->dev);
+	dev_priv->dev->driver->irq_postinstall(dev_priv->dev);
 }

drivers/gpu/drm/i915/i915_reg.h

@@ -26,8 +26,8 @@
 #define _I915_REG_H_
 
 #define _PIPE(pipe, a, b) ((a) + (pipe)*((b)-(a)))
+#define _PLANE(plane, a, b) _PIPE(plane, a, b)
 #define _TRANSCODER(tran, a, b) ((a) + (tran)*((b)-(a)))
-
 #define _PORT(port, a, b) ((a) + (port)*((b)-(a)))
 #define _PIPE3(pipe, a, b, c) ((pipe) == PIPE_A ? (a) : \
 			       (pipe) == PIPE_B ? (b) : (c))
@@ -796,6 +796,8 @@ enum punit_power_well {
 #define _VLV_PCS_DW0_CH1		0x8400
 #define   DPIO_PCS_TX_LANE2_RESET	(1<<16)
 #define   DPIO_PCS_TX_LANE1_RESET	(1<<7)
+#define   DPIO_LEFT_TXFIFO_RST_MASTER2	(1<<4)
+#define   DPIO_RIGHT_TXFIFO_RST_MASTER2	(1<<3)
 #define VLV_PCS_DW0(ch) _PORT(ch, _VLV_PCS_DW0_CH0, _VLV_PCS_DW0_CH1)
 
 #define _VLV_PCS01_DW0_CH0		0x200
@@ -836,12 +838,31 @@ enum punit_power_well {
 
 #define _VLV_PCS_DW9_CH0		0x8224
 #define _VLV_PCS_DW9_CH1		0x8424
+#define   DPIO_PCS_TX2MARGIN_MASK	(0x7<<13)
+#define   DPIO_PCS_TX2MARGIN_000	(0<<13)
+#define   DPIO_PCS_TX2MARGIN_101	(1<<13)
+#define   DPIO_PCS_TX1MARGIN_MASK	(0x7<<10)
+#define   DPIO_PCS_TX1MARGIN_000	(0<<10)
+#define   DPIO_PCS_TX1MARGIN_101	(1<<10)
 #define	VLV_PCS_DW9(ch) _PORT(ch, _VLV_PCS_DW9_CH0, _VLV_PCS_DW9_CH1)
 
+#define _VLV_PCS01_DW9_CH0		0x224
+#define _VLV_PCS23_DW9_CH0		0x424
+#define _VLV_PCS01_DW9_CH1		0x2624
+#define _VLV_PCS23_DW9_CH1		0x2824
+#define VLV_PCS01_DW9(ch) _PORT(ch, _VLV_PCS01_DW9_CH0, _VLV_PCS01_DW9_CH1)
+#define VLV_PCS23_DW9(ch) _PORT(ch, _VLV_PCS23_DW9_CH0, _VLV_PCS23_DW9_CH1)
+
 #define _CHV_PCS_DW10_CH0		0x8228
 #define _CHV_PCS_DW10_CH1		0x8428
 #define   DPIO_PCS_SWING_CALC_TX0_TX2	(1<<30)
 #define   DPIO_PCS_SWING_CALC_TX1_TX3	(1<<31)
+#define   DPIO_PCS_TX2DEEMP_MASK	(0xf<<24)
+#define   DPIO_PCS_TX2DEEMP_9P5		(0<<24)
+#define   DPIO_PCS_TX2DEEMP_6P0		(2<<24)
+#define   DPIO_PCS_TX1DEEMP_MASK	(0xf<<16)
+#define   DPIO_PCS_TX1DEEMP_9P5		(0<<16)
+#define   DPIO_PCS_TX1DEEMP_6P0		(2<<16)
 #define CHV_PCS_DW10(ch) _PORT(ch, _CHV_PCS_DW10_CH0, _CHV_PCS_DW10_CH1)
 
 #define _VLV_PCS01_DW10_CH0		0x0228
@@ -853,8 +874,18 @@ enum punit_power_well {
 
 #define _VLV_PCS_DW11_CH0		0x822c
 #define _VLV_PCS_DW11_CH1		0x842c
+#define   DPIO_LANEDESKEW_STRAP_OVRD	(1<<3)
+#define   DPIO_LEFT_TXFIFO_RST_MASTER	(1<<1)
+#define   DPIO_RIGHT_TXFIFO_RST_MASTER	(1<<0)
 #define VLV_PCS_DW11(ch) _PORT(ch, _VLV_PCS_DW11_CH0, _VLV_PCS_DW11_CH1)
 
+#define _VLV_PCS01_DW11_CH0		0x022c
+#define _VLV_PCS23_DW11_CH0		0x042c
+#define _VLV_PCS01_DW11_CH1		0x262c
+#define _VLV_PCS23_DW11_CH1		0x282c
+#define VLV_PCS01_DW11(ch) _PORT(ch, _VLV_PCS01_DW0_CH0, _VLV_PCS01_DW0_CH1)
+#define VLV_PCS23_DW11(ch) _PORT(ch, _VLV_PCS23_DW0_CH0, _VLV_PCS23_DW0_CH1)
+
 #define _VLV_PCS_DW12_CH0		0x8230
 #define _VLV_PCS_DW12_CH1		0x8430
 #define VLV_PCS_DW12(ch) _PORT(ch, _VLV_PCS_DW12_CH0, _VLV_PCS_DW12_CH1)
@@ -2506,9 +2537,7 @@ enum punit_power_well {
 
 #define EDP_PSR_AUX_CTL(dev)			(EDP_PSR_BASE(dev) + 0x10)
 #define EDP_PSR_AUX_DATA1(dev)			(EDP_PSR_BASE(dev) + 0x14)
-#define   EDP_PSR_DPCD_COMMAND		0x80060000
 #define EDP_PSR_AUX_DATA2(dev)			(EDP_PSR_BASE(dev) + 0x18)
-#define   EDP_PSR_DPCD_NORMAL_OPERATION	(1<<24)
 #define EDP_PSR_AUX_DATA3(dev)			(EDP_PSR_BASE(dev) + 0x1c)
 #define EDP_PSR_AUX_DATA4(dev)			(EDP_PSR_BASE(dev) + 0x20)
 #define EDP_PSR_AUX_DATA5(dev)			(EDP_PSR_BASE(dev) + 0x24)
@@ -3645,6 +3674,7 @@ enum punit_power_well {
 #define   DP_AUX_CH_CTL_PRECHARGE_TEST	    (1 << 11)
 #define   DP_AUX_CH_CTL_BIT_CLOCK_2X_MASK    (0x7ff)
 #define   DP_AUX_CH_CTL_BIT_CLOCK_2X_SHIFT   0
+#define   DP_AUX_CH_CTL_SYNC_PULSE_SKL(c)   ((c) - 1)
 
 /*
  * Computing GMCH M and N values for the Display Port link
@@ -4510,6 +4540,143 @@ enum punit_power_well {
 #define SPCONSTALPHA(pipe, plane) _PIPE(pipe * 2 + plane, _SPACONSTALPHA, _SPBCONSTALPHA)
 #define SPGAMC(pipe, plane) _PIPE(pipe * 2 + plane, _SPAGAMC, _SPBGAMC)
 
+/* Skylake plane registers */
+
+#define _PLANE_CTL_1_A				0x70180
+#define _PLANE_CTL_2_A				0x70280
+#define _PLANE_CTL_3_A				0x70380
+#define   PLANE_CTL_ENABLE			(1 << 31)
+#define   PLANE_CTL_PIPE_GAMMA_ENABLE		(1 << 30)
+#define   PLANE_CTL_FORMAT_MASK			(0xf << 24)
+#define   PLANE_CTL_FORMAT_YUV422		(  0 << 24)
+#define   PLANE_CTL_FORMAT_NV12			(  1 << 24)
+#define   PLANE_CTL_FORMAT_XRGB_2101010		(  2 << 24)
+#define   PLANE_CTL_FORMAT_XRGB_8888		(  4 << 24)
+#define   PLANE_CTL_FORMAT_XRGB_16161616F	(  6 << 24)
+#define   PLANE_CTL_FORMAT_AYUV			(  8 << 24)
+#define   PLANE_CTL_FORMAT_INDEXED		( 12 << 24)
+#define   PLANE_CTL_FORMAT_RGB_565		( 14 << 24)
+#define   PLANE_CTL_PIPE_CSC_ENABLE		(1 << 23)
+#define   PLANE_CTL_KEY_ENABLE_MASK		(0x3 << 21)
+#define   PLANE_CTL_KEY_ENABLE_SOURCE		(  1 << 21)
+#define   PLANE_CTL_KEY_ENABLE_DESTINATION	(  2 << 21)
+#define   PLANE_CTL_ORDER_BGRX			(0 << 20)
+#define   PLANE_CTL_ORDER_RGBX			(1 << 20)
+#define   PLANE_CTL_YUV422_ORDER_MASK		(0x3 << 16)
+#define   PLANE_CTL_YUV422_YUYV			(  0 << 16)
+#define   PLANE_CTL_YUV422_UYVY			(  1 << 16)
+#define   PLANE_CTL_YUV422_YVYU			(  2 << 16)
+#define   PLANE_CTL_YUV422_VYUY			(  3 << 16)
+#define   PLANE_CTL_DECOMPRESSION_ENABLE	(1 << 15)
+#define   PLANE_CTL_TRICKLE_FEED_DISABLE	(1 << 14)
+#define   PLANE_CTL_PLANE_GAMMA_DISABLE		(1 << 13)
+#define   PLANE_CTL_TILED_MASK			(0x7 << 10)
+#define   PLANE_CTL_TILED_LINEAR		(  0 << 10)
+#define   PLANE_CTL_TILED_X			(  1 << 10)
+#define   PLANE_CTL_TILED_Y			(  4 << 10)
+#define   PLANE_CTL_TILED_YF			(  5 << 10)
+#define   PLANE_CTL_ALPHA_MASK			(0x3 << 4)
+#define   PLANE_CTL_ALPHA_DISABLE		(  0 << 4)
+#define   PLANE_CTL_ALPHA_SW_PREMULTIPLY	(  2 << 4)
+#define   PLANE_CTL_ALPHA_HW_PREMULTIPLY	(  3 << 4)
+#define _PLANE_STRIDE_1_A			0x70188
+#define _PLANE_STRIDE_2_A			0x70288
+#define _PLANE_STRIDE_3_A			0x70388
+#define _PLANE_POS_1_A				0x7018c
+#define _PLANE_POS_2_A				0x7028c
+#define _PLANE_POS_3_A				0x7038c
+#define _PLANE_SIZE_1_A				0x70190
+#define _PLANE_SIZE_2_A				0x70290
+#define _PLANE_SIZE_3_A				0x70390
+#define _PLANE_SURF_1_A				0x7019c
+#define _PLANE_SURF_2_A				0x7029c
+#define _PLANE_SURF_3_A				0x7039c
+#define _PLANE_OFFSET_1_A			0x701a4
+#define _PLANE_OFFSET_2_A			0x702a4
+#define _PLANE_OFFSET_3_A			0x703a4
+#define _PLANE_KEYVAL_1_A			0x70194
+#define _PLANE_KEYVAL_2_A			0x70294
+#define _PLANE_KEYMSK_1_A			0x70198
+#define _PLANE_KEYMSK_2_A			0x70298
+#define _PLANE_KEYMAX_1_A			0x701a0
+#define _PLANE_KEYMAX_2_A			0x702a0
+
+#define _PLANE_CTL_1_B				0x71180
+#define _PLANE_CTL_2_B				0x71280
+#define _PLANE_CTL_3_B				0x71380
+#define _PLANE_CTL_1(pipe)	_PIPE(pipe, _PLANE_CTL_1_A, _PLANE_CTL_1_B)
+#define _PLANE_CTL_2(pipe)	_PIPE(pipe, _PLANE_CTL_2_A, _PLANE_CTL_2_B)
+#define _PLANE_CTL_3(pipe)	_PIPE(pipe, _PLANE_CTL_3_A, _PLANE_CTL_3_B)
+#define PLANE_CTL(pipe, plane)	\
+	_PLANE(plane, _PLANE_CTL_1(pipe), _PLANE_CTL_2(pipe))
+
+#define _PLANE_STRIDE_1_B			0x71188
+#define _PLANE_STRIDE_2_B			0x71288
+#define _PLANE_STRIDE_3_B			0x71388
+#define _PLANE_STRIDE_1(pipe)	\
+	_PIPE(pipe, _PLANE_STRIDE_1_A, _PLANE_STRIDE_1_B)
+#define _PLANE_STRIDE_2(pipe)	\
+	_PIPE(pipe, _PLANE_STRIDE_2_A, _PLANE_STRIDE_2_B)
+#define _PLANE_STRIDE_3(pipe)	\
+	_PIPE(pipe, _PLANE_STRIDE_3_A, _PLANE_STRIDE_3_B)
+#define PLANE_STRIDE(pipe, plane)	\
+	_PLANE(plane, _PLANE_STRIDE_1(pipe), _PLANE_STRIDE_2(pipe))
+
+#define _PLANE_POS_1_B				0x7118c
+#define _PLANE_POS_2_B				0x7128c
+#define _PLANE_POS_3_B				0x7138c
+#define _PLANE_POS_1(pipe)	_PIPE(pipe, _PLANE_POS_1_A, _PLANE_POS_1_B)
+#define _PLANE_POS_2(pipe)	_PIPE(pipe, _PLANE_POS_2_A, _PLANE_POS_2_B)
+#define _PLANE_POS_3(pipe)	_PIPE(pipe, _PLANE_POS_3_A, _PLANE_POS_3_B)
+#define PLANE_POS(pipe, plane)	\
+	_PLANE(plane, _PLANE_POS_1(pipe), _PLANE_POS_2(pipe))
+
+#define _PLANE_SIZE_1_B				0x71190
+#define _PLANE_SIZE_2_B				0x71290
+#define _PLANE_SIZE_3_B				0x71390
+#define _PLANE_SIZE_1(pipe)	_PIPE(pipe, _PLANE_SIZE_1_A, _PLANE_SIZE_1_B)
+#define _PLANE_SIZE_2(pipe)	_PIPE(pipe, _PLANE_SIZE_2_A, _PLANE_SIZE_2_B)
+#define _PLANE_SIZE_3(pipe)	_PIPE(pipe, _PLANE_SIZE_3_A, _PLANE_SIZE_3_B)
+#define PLANE_SIZE(pipe, plane)	\
+	_PLANE(plane, _PLANE_SIZE_1(pipe), _PLANE_SIZE_2(pipe))
+
+#define _PLANE_SURF_1_B				0x7119c
+#define _PLANE_SURF_2_B				0x7129c
+#define _PLANE_SURF_3_B				0x7139c
+#define _PLANE_SURF_1(pipe)	_PIPE(pipe, _PLANE_SURF_1_A, _PLANE_SURF_1_B)
+#define _PLANE_SURF_2(pipe)	_PIPE(pipe, _PLANE_SURF_2_A, _PLANE_SURF_2_B)
+#define _PLANE_SURF_3(pipe)	_PIPE(pipe, _PLANE_SURF_3_A, _PLANE_SURF_3_B)
+#define PLANE_SURF(pipe, plane)	\
+	_PLANE(plane, _PLANE_SURF_1(pipe), _PLANE_SURF_2(pipe))
+
+#define _PLANE_OFFSET_1_B			0x711a4
+#define _PLANE_OFFSET_2_B			0x712a4
+#define _PLANE_OFFSET_1(pipe) _PIPE(pipe, _PLANE_OFFSET_1_A, _PLANE_OFFSET_1_B)
+#define _PLANE_OFFSET_2(pipe) _PIPE(pipe, _PLANE_OFFSET_2_A, _PLANE_OFFSET_2_B)
+#define PLANE_OFFSET(pipe, plane)	\
+	_PLANE(plane, _PLANE_OFFSET_1(pipe), _PLANE_OFFSET_2(pipe))
+
+#define _PLANE_KEYVAL_1_B			0x71194
+#define _PLANE_KEYVAL_2_B			0x71294
+#define _PLANE_KEYVAL_1(pipe) _PIPE(pipe, _PLANE_KEYVAL_1_A, _PLANE_KEYVAL_1_B)
+#define _PLANE_KEYVAL_2(pipe) _PIPE(pipe, _PLANE_KEYVAL_2_A, _PLANE_KEYVAL_2_B)
+#define PLANE_KEYVAL(pipe, plane)	\
+	_PLANE(plane, _PLANE_KEYVAL_1(pipe), _PLANE_KEYVAL_2(pipe))
+
+#define _PLANE_KEYMSK_1_B			0x71198
+#define _PLANE_KEYMSK_2_B			0x71298
+#define _PLANE_KEYMSK_1(pipe) _PIPE(pipe, _PLANE_KEYMSK_1_A, _PLANE_KEYMSK_1_B)
+#define _PLANE_KEYMSK_2(pipe) _PIPE(pipe, _PLANE_KEYMSK_2_A, _PLANE_KEYMSK_2_B)
+#define PLANE_KEYMSK(pipe, plane)	\
+	_PLANE(plane, _PLANE_KEYMSK_1(pipe), _PLANE_KEYMSK_2(pipe))
+
+#define _PLANE_KEYMAX_1_B			0x711a0
+#define _PLANE_KEYMAX_2_B			0x712a0
+#define _PLANE_KEYMAX_1(pipe) _PIPE(pipe, _PLANE_KEYMAX_1_A, _PLANE_KEYMAX_1_B)
+#define _PLANE_KEYMAX_2(pipe) _PIPE(pipe, _PLANE_KEYMAX_2_A, _PLANE_KEYMAX_2_B)
+#define PLANE_KEYMAX(pipe, plane)	\
+	_PLANE(plane, _PLANE_KEYMAX_1(pipe), _PLANE_KEYMAX_2(pipe))
+
 /* VBIOS regs */
 #define VGACNTRL		0x71400
 # define VGA_DISP_DISABLE			(1 << 31)
@@ -4746,10 +4913,23 @@ enum punit_power_well {
 #define  GEN8_PIPE_SCAN_LINE_EVENT	(1 << 2)
 #define  GEN8_PIPE_VSYNC		(1 << 1)
 #define  GEN8_PIPE_VBLANK		(1 << 0)
+#define  GEN9_PIPE_CURSOR_FAULT		(1 << 11)
+#define  GEN9_PIPE_PLANE3_FAULT		(1 << 9)
+#define  GEN9_PIPE_PLANE2_FAULT		(1 << 8)
+#define  GEN9_PIPE_PLANE1_FAULT		(1 << 7)
+#define  GEN9_PIPE_PLANE3_FLIP_DONE	(1 << 5)
+#define  GEN9_PIPE_PLANE2_FLIP_DONE	(1 << 4)
+#define  GEN9_PIPE_PLANE1_FLIP_DONE	(1 << 3)
+#define  GEN9_PIPE_PLANE_FLIP_DONE(p)	(1 << (3 + p))
 #define GEN8_DE_PIPE_IRQ_FAULT_ERRORS \
 	(GEN8_PIPE_CURSOR_FAULT | \
 	 GEN8_PIPE_SPRITE_FAULT | \
 	 GEN8_PIPE_PRIMARY_FAULT)
+#define GEN9_DE_PIPE_IRQ_FAULT_ERRORS \
+	(GEN9_PIPE_CURSOR_FAULT | \
+	 GEN9_PIPE_PLANE3_FAULT | \
+	 GEN9_PIPE_PLANE2_FAULT | \
+	 GEN9_PIPE_PLANE1_FAULT)
 
 #define GEN8_DE_PORT_ISR 0x44440
 #define GEN8_DE_PORT_IMR 0x44444
@@ -4839,6 +5019,7 @@ enum punit_power_well {
 /* GEN8 chicken */
 #define HDC_CHICKEN0				0x7300
 #define  HDC_FORCE_NON_COHERENT			(1<<4)
+#define  HDC_FENCE_DEST_SLM_DISABLE		(1<<14)
 
 /* WaCatErrorRejectionIssue */
 #define GEN7_SQ_CHICKEN_MBCUNIT_CONFIG		0x9030
@@ -5751,6 +5932,9 @@ enum punit_power_well {
 #define   GEN7_SINGLE_SUBSCAN_DISPATCH_ENABLE	(1<<10)
 #define   GEN7_PSD_SINGLE_PORT_DISPATCH_ENABLE	(1<<3)
 
+#define GEN9_HALF_SLICE_CHICKEN5	0xe188
+#define   GEN9_DG_MIRROR_FIX_ENABLE	(1<<5)
+
 #define GEN8_ROW_CHICKEN		0xe4f0
 #define   PARTIAL_INSTRUCTION_SHOOTDOWN_DISABLE	(1<<8)
 #define   STALL_DOP_GATING_DISABLE		(1<<5)

drivers/gpu/drm/i915/intel_bios.h

@@ -46,7 +46,7 @@ struct bdb_header {
 	u16 version;			/**< decimal */
 	u16 header_size;		/**< in bytes */
 	u16 bdb_size;			/**< in bytes */
-};
+} __packed;
 
 /* strictly speaking, this is a "skip" block, but it has interesting info */
 struct vbios_data {
@@ -252,7 +252,7 @@ union child_device_config {
 	/* This one should also be safe to use anywhere, even without version
 	 * checks. */
 	struct common_child_dev_config common;
-};
+} __packed;
 
 struct bdb_general_definitions {
 	/* DDC GPIO */
@@ -888,12 +888,12 @@ struct mipi_pps_data {
 	u16 bl_disable_delay;
 	u16 panel_off_delay;
 	u16 panel_power_cycle_delay;
-};
+} __packed;
 
 struct bdb_mipi_config {
 	struct mipi_config config[MAX_MIPI_CONFIGURATIONS];
 	struct mipi_pps_data pps[MAX_MIPI_CONFIGURATIONS];
-};
+} __packed;
 
 /* Block 53 contains MIPI sequences as needed by the panel
  * for enabling it. This block can be variable in size and
@@ -902,7 +902,7 @@ struct bdb_mipi_config {
 struct bdb_mipi_sequence {
 	u8 version;
 	u8 data[0];
-};
+} __packed;
 
 /* MIPI Sequnece Block definitions */
 enum mipi_seq {

drivers/gpu/drm/i915/intel_crt.c

@@ -72,7 +72,7 @@ static bool intel_crt_get_hw_state(struct intel_encoder *encoder,
 	u32 tmp;
 
 	power_domain = intel_display_port_power_domain(encoder);
-	if (!intel_display_power_enabled(dev_priv, power_domain))
+	if (!intel_display_power_is_enabled(dev_priv, power_domain))
 		return false;
 
 	tmp = I915_READ(crt->adpa_reg);

drivers/gpu/drm/i915/intel_ddi.c

@@ -95,8 +95,8 @@ static const struct ddi_buf_trans bdw_ddi_translations_dp[] = {
 	{ 0x00BEFFFF, 0x00140006 },
 	{ 0x80B2CFFF, 0x001B0002 },
 	{ 0x00FFFFFF, 0x000E000A },
-	{ 0x00D75FFF, 0x00180004 },
-	{ 0x80CB2FFF, 0x001B0002 },
+	{ 0x00DB6FFF, 0x00160005 },
+	{ 0x80C71FFF, 0x001A0002 },
 	{ 0x00F7DFFF, 0x00180004 },
 	{ 0x80D75FFF, 0x001B0002 },
 };
@@ -127,6 +127,32 @@ static const struct ddi_buf_trans bdw_ddi_translations_hdmi[] = {
 	{ 0x80FFFFFF, 0x001B0002 },	/* 9:	1000	1000	0	*/
 };
 
+static const struct ddi_buf_trans skl_ddi_translations_dp[] = {
+	{ 0x00000018, 0x000000a0 },
+	{ 0x00004014, 0x00000098 },
+	{ 0x00006012, 0x00000088 },
+	{ 0x00008010, 0x00000080 },
+	{ 0x00000018, 0x00000098 },
+	{ 0x00004014, 0x00000088 },
+	{ 0x00006012, 0x00000080 },
+	{ 0x00000018, 0x00000088 },
+	{ 0x00004014, 0x00000080 },
+};
+
+static const struct ddi_buf_trans skl_ddi_translations_hdmi[] = {
+					/* Idx	NT mV   T mV    db  */
+	{ 0x00000018, 0x000000a0 },	/* 0:	400	400	0   */
+	{ 0x00004014, 0x00000098 },	/* 1:	400	600	3.5 */
+	{ 0x00006012, 0x00000088 },	/* 2:	400	800	6   */
+	{ 0x00000018, 0x0000003c },	/* 3:	450	450	0   */
+	{ 0x00000018, 0x00000098 },	/* 4:	600	600	0   */
+	{ 0x00003015, 0x00000088 },	/* 5:	600	800	2.5 */
+	{ 0x00005013, 0x00000080 },	/* 6:	600	1000	4.5 */
+	{ 0x00000018, 0x00000088 },	/* 7:	800	800	0   */
+	{ 0x00000096, 0x00000080 },	/* 8:	800	1000	2   */
+	{ 0x00000018, 0x00000080 },	/* 9:	1200	1200	0   */
+};
+
 enum port intel_ddi_get_encoder_port(struct intel_encoder *intel_encoder)
 {
 	struct drm_encoder *encoder = &intel_encoder->base;
@@ -169,7 +195,14 @@ static void intel_prepare_ddi_buffers(struct drm_device *dev, enum port port)
 	const struct ddi_buf_trans *ddi_translations_hdmi;
 	const struct ddi_buf_trans *ddi_translations;
 
-	if (IS_BROADWELL(dev)) {
+	if (IS_SKYLAKE(dev)) {
+		ddi_translations_fdi = NULL;
+		ddi_translations_dp = skl_ddi_translations_dp;
+		ddi_translations_edp = skl_ddi_translations_dp;
+		ddi_translations_hdmi = skl_ddi_translations_hdmi;
+		n_hdmi_entries = ARRAY_SIZE(skl_ddi_translations_hdmi);
+		hdmi_800mV_0dB = 7;
+	} else if (IS_BROADWELL(dev)) {
 		ddi_translations_fdi = bdw_ddi_translations_fdi;
 		ddi_translations_dp = bdw_ddi_translations_dp;
 		ddi_translations_edp = bdw_ddi_translations_edp;
@@ -208,7 +241,10 @@ static void intel_prepare_ddi_buffers(struct drm_device *dev, enum port port)
 			ddi_translations = ddi_translations_dp;
 		break;
 	case PORT_E:
-		ddi_translations = ddi_translations_fdi;
+		if (ddi_translations_fdi)
+			ddi_translations = ddi_translations_fdi;
+		else
+			ddi_translations = ddi_translations_dp;
 		break;
 	default:
 		BUG();
@@ -962,7 +998,7 @@ bool intel_ddi_connector_get_hw_state(struct intel_connector *intel_connector)
 	uint32_t tmp;
 
 	power_domain = intel_display_port_power_domain(intel_encoder);
-	if (!intel_display_power_enabled(dev_priv, power_domain))
+	if (!intel_display_power_is_enabled(dev_priv, power_domain))
 		return false;
 
 	if (!intel_encoder->get_hw_state(intel_encoder, &pipe))
@@ -1008,7 +1044,7 @@ bool intel_ddi_get_hw_state(struct intel_encoder *encoder,
 	int i;
 
 	power_domain = intel_display_port_power_domain(encoder);
-	if (!intel_display_power_enabled(dev_priv, power_domain))
+	if (!intel_display_power_is_enabled(dev_priv, power_domain))
 		return false;
 
 	tmp = I915_READ(DDI_BUF_CTL(port));
@@ -1296,7 +1332,7 @@ static bool hsw_ddi_pll_get_hw_state(struct drm_i915_private *dev_priv,
 {
 	uint32_t val;
 
-	if (!intel_display_power_enabled(dev_priv, POWER_DOMAIN_PLLS))
+	if (!intel_display_power_is_enabled(dev_priv, POWER_DOMAIN_PLLS))
 		return false;
 
 	val = I915_READ(WRPLL_CTL(pll->id));
@@ -1486,7 +1522,7 @@ void intel_ddi_get_config(struct intel_encoder *encoder,
 		break;
 	}
 
-	if (intel_display_power_enabled(dev_priv, POWER_DOMAIN_AUDIO)) {
+	if (intel_display_power_is_enabled(dev_priv, POWER_DOMAIN_AUDIO)) {
 		temp = I915_READ(HSW_AUD_PIN_ELD_CP_VLD);
 		if (temp & (AUDIO_OUTPUT_ENABLE_A << (intel_crtc->pipe * 4)))
 			pipe_config->has_audio = true;

drivers/gpu/drm/i915/intel_display.c

@@ -73,8 +73,6 @@ static const uint32_t intel_cursor_formats[] = {
 	DRM_FORMAT_ARGB8888,
 };
 
-static void intel_increase_pllclock(struct drm_device *dev,
-				    enum pipe pipe);
 static void intel_crtc_update_cursor(struct drm_crtc *crtc, bool on);
 
 static void i9xx_crtc_clock_get(struct intel_crtc *crtc,
@@ -889,60 +887,6 @@ enum transcoder intel_pipe_to_cpu_transcoder(struct drm_i915_private *dev_priv,
 	return intel_crtc->config.cpu_transcoder;
 }
 
-static void g4x_wait_for_vblank(struct drm_device *dev, int pipe)
-{
-	struct drm_i915_private *dev_priv = dev->dev_private;
-	u32 frame, frame_reg = PIPE_FRMCOUNT_GM45(pipe);
-
-	frame = I915_READ(frame_reg);
-
-	if (wait_for(I915_READ_NOTRACE(frame_reg) != frame, 50))
-		WARN(1, "vblank wait on pipe %c timed out\n",
-		     pipe_name(pipe));
-}
-
-/**
- * intel_wait_for_vblank - wait for vblank on a given pipe
- * @dev: drm device
- * @pipe: pipe to wait for
- *
- * Wait for vblank to occur on a given pipe.  Needed for various bits of
- * mode setting code.
- */
-void intel_wait_for_vblank(struct drm_device *dev, int pipe)
-{
-	struct drm_i915_private *dev_priv = dev->dev_private;
-	int pipestat_reg = PIPESTAT(pipe);
-
-	if (IS_G4X(dev) || INTEL_INFO(dev)->gen >= 5) {
-		g4x_wait_for_vblank(dev, pipe);
-		return;
-	}
-
-	/* Clear existing vblank status. Note this will clear any other
-	 * sticky status fields as well.
-	 *
-	 * This races with i915_driver_irq_handler() with the result
-	 * that either function could miss a vblank event.  Here it is not
-	 * fatal, as we will either wait upon the next vblank interrupt or
-	 * timeout.  Generally speaking intel_wait_for_vblank() is only
-	 * called during modeset at which time the GPU should be idle and
-	 * should *not* be performing page flips and thus not waiting on
-	 * vblanks...
-	 * Currently, the result of us stealing a vblank from the irq
-	 * handler is that a single frame will be skipped during swapbuffers.
-	 */
-	I915_WRITE(pipestat_reg,
-		   I915_READ(pipestat_reg) | PIPE_VBLANK_INTERRUPT_STATUS);
-
-	/* Wait for vblank interrupt bit to set */
-	if (wait_for(I915_READ(pipestat_reg) &
-		     PIPE_VBLANK_INTERRUPT_STATUS,
-		     50))
-		DRM_DEBUG_KMS("vblank wait on pipe %c timed out\n",
-			      pipe_name(pipe));
-}
-
 static bool pipe_dsl_stopped(struct drm_device *dev, enum pipe pipe)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
@@ -1189,8 +1133,8 @@ void assert_fdi_rx_pll(struct drm_i915_private *dev_priv,
 	     state_string(state), state_string(cur_state));
 }
 
-static void assert_panel_unlocked(struct drm_i915_private *dev_priv,
-				  enum pipe pipe)
+void assert_panel_unlocked(struct drm_i915_private *dev_priv,
+			   enum pipe pipe)
 {
 	struct drm_device *dev = dev_priv->dev;
 	int pp_reg;
@@ -1263,7 +1207,7 @@ void assert_pipe(struct drm_i915_private *dev_priv,
 	    (pipe == PIPE_B && dev_priv->quirks & QUIRK_PIPEB_FORCE))
 		state = true;
 
-	if (!intel_display_power_enabled(dev_priv,
+	if (!intel_display_power_is_enabled(dev_priv,
 				POWER_DOMAIN_TRANSCODER(cpu_transcoder))) {
 		cur_state = false;
 	} else {
@@ -1332,7 +1276,14 @@ static void assert_sprites_disabled(struct drm_i915_private *dev_priv,
 	int reg, sprite;
 	u32 val;
 
-	if (IS_VALLEYVIEW(dev)) {
+	if (INTEL_INFO(dev)->gen >= 9) {
+		for_each_sprite(pipe, sprite) {
+			val = I915_READ(PLANE_CTL(pipe, sprite));
+			WARN(val & PLANE_CTL_ENABLE,
+			     "plane %d assertion failure, should be off on pipe %c but is still active\n",
+			     sprite, pipe_name(pipe));
+		}
+	} else if (IS_VALLEYVIEW(dev)) {
 		for_each_sprite(pipe, sprite) {
 			reg = SPCNTR(pipe, sprite);
 			val = I915_READ(reg);
@@ -2233,7 +2184,9 @@ intel_pin_and_fence_fb_obj(struct drm_device *dev,
 
 	switch (obj->tiling_mode) {
 	case I915_TILING_NONE:
-		if (IS_BROADWATER(dev) || IS_CRESTLINE(dev))
+		if (INTEL_INFO(dev)->gen >= 9)
+			alignment = 256 * 1024;
+		else if (IS_BROADWATER(dev) || IS_CRESTLINE(dev))
 			alignment = 128 * 1024;
 		else if (INTEL_INFO(dev)->gen >= 4)
 			alignment = 4 * 1024;
@@ -2241,8 +2194,12 @@ intel_pin_and_fence_fb_obj(struct drm_device *dev,
 			alignment = 64 * 1024;
 		break;
 	case I915_TILING_X:
-		/* pin() will align the object as required by fence */
-		alignment = 0;
+		if (INTEL_INFO(dev)->gen >= 9)
+			alignment = 256 * 1024;
+		else {
+			/* pin() will align the object as required by fence */
+			alignment = 0;
+		}
 		break;
 	case I915_TILING_Y:
 		WARN(1, "Y tiled bo slipped through, driver bug!\n");
@@ -2672,6 +2629,90 @@ static void ironlake_update_primary_plane(struct drm_crtc *crtc,
 	POSTING_READ(reg);
 }
 
+static void skylake_update_primary_plane(struct drm_crtc *crtc,
+					 struct drm_framebuffer *fb,
+					 int x, int y)
+{
+	struct drm_device *dev = crtc->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	struct intel_framebuffer *intel_fb;
+	struct drm_i915_gem_object *obj;
+	int pipe = intel_crtc->pipe;
+	u32 plane_ctl, stride;
+
+	if (!intel_crtc->primary_enabled) {
+		I915_WRITE(PLANE_CTL(pipe, 0), 0);
+		I915_WRITE(PLANE_SURF(pipe, 0), 0);
+		POSTING_READ(PLANE_CTL(pipe, 0));
+		return;
+	}
+
+	plane_ctl = PLANE_CTL_ENABLE |
+		    PLANE_CTL_PIPE_GAMMA_ENABLE |
+		    PLANE_CTL_PIPE_CSC_ENABLE;
+
+	switch (fb->pixel_format) {
+	case DRM_FORMAT_RGB565:
+		plane_ctl |= PLANE_CTL_FORMAT_RGB_565;
+		break;
+	case DRM_FORMAT_XRGB8888:
+		plane_ctl |= PLANE_CTL_FORMAT_XRGB_8888;
+		break;
+	case DRM_FORMAT_XBGR8888:
+		plane_ctl |= PLANE_CTL_ORDER_RGBX;
+		plane_ctl |= PLANE_CTL_FORMAT_XRGB_8888;
+		break;
+	case DRM_FORMAT_XRGB2101010:
+		plane_ctl |= PLANE_CTL_FORMAT_XRGB_2101010;
+		break;
+	case DRM_FORMAT_XBGR2101010:
+		plane_ctl |= PLANE_CTL_ORDER_RGBX;
+		plane_ctl |= PLANE_CTL_FORMAT_XRGB_2101010;
+		break;
+	default:
+		BUG();
+	}
+
+	intel_fb = to_intel_framebuffer(fb);
+	obj = intel_fb->obj;
+
+	/*
+	 * The stride is either expressed as a multiple of 64 bytes chunks for
+	 * linear buffers or in number of tiles for tiled buffers.
+	 */
+	switch (obj->tiling_mode) {
+	case I915_TILING_NONE:
+		stride = fb->pitches[0] >> 6;
+		break;
+	case I915_TILING_X:
+		plane_ctl |= PLANE_CTL_TILED_X;
+		stride = fb->pitches[0] >> 9;
+		break;
+	default:
+		BUG();
+	}
+
+	plane_ctl |= PLANE_CTL_PLANE_GAMMA_DISABLE;
+
+	I915_WRITE(PLANE_CTL(pipe, 0), plane_ctl);
+
+	DRM_DEBUG_KMS("Writing base %08lX %d,%d,%d,%d pitch=%d\n",
+		      i915_gem_obj_ggtt_offset(obj),
+		      x, y, fb->width, fb->height,
+		      fb->pitches[0]);
+
+	I915_WRITE(PLANE_POS(pipe, 0), 0);
+	I915_WRITE(PLANE_OFFSET(pipe, 0), (y << 16) | x);
+	I915_WRITE(PLANE_SIZE(pipe, 0),
+		   (intel_crtc->config.pipe_src_h - 1) << 16 |
+		   (intel_crtc->config.pipe_src_w - 1));
+	I915_WRITE(PLANE_STRIDE(pipe, 0), stride);
+	I915_WRITE(PLANE_SURF(pipe, 0), i915_gem_obj_ggtt_offset(obj));
+
+	POSTING_READ(PLANE_SURF(pipe, 0));
+}
+
 /* Assume fb object is pinned & idle & fenced and just update base pointers */
 static int
 intel_pipe_set_base_atomic(struct drm_crtc *crtc, struct drm_framebuffer *fb,
@@ -2682,7 +2723,6 @@ intel_pipe_set_base_atomic(struct drm_crtc *crtc, struct drm_framebuffer *fb,
 
 	if (dev_priv->display.disable_fbc)
 		dev_priv->display.disable_fbc(dev);
-	intel_increase_pllclock(dev, to_intel_crtc(crtc)->pipe);
 
 	dev_priv->display.update_primary_plane(crtc, fb, x, y);
 
@@ -2762,20 +2802,58 @@ static bool intel_crtc_has_pending_flip(struct drm_crtc *crtc)
 	struct drm_device *dev = crtc->dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
-	unsigned long flags;
 	bool pending;
 
 	if (i915_reset_in_progress(&dev_priv->gpu_error) ||
 	    intel_crtc->reset_counter != atomic_read(&dev_priv->gpu_error.reset_counter))
 		return false;
 
-	spin_lock_irqsave(&dev->event_lock, flags);
+	spin_lock_irq(&dev->event_lock);
 	pending = to_intel_crtc(crtc)->unpin_work != NULL;
-	spin_unlock_irqrestore(&dev->event_lock, flags);
+	spin_unlock_irq(&dev->event_lock);
 
 	return pending;
 }
 
+static void intel_update_pipe_size(struct intel_crtc *crtc)
+{
+	struct drm_device *dev = crtc->base.dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	const struct drm_display_mode *adjusted_mode;
+
+	if (!i915.fastboot)
+		return;
+
+	/*
+	 * Update pipe size and adjust fitter if needed: the reason for this is
+	 * that in compute_mode_changes we check the native mode (not the pfit
+	 * mode) to see if we can flip rather than do a full mode set. In the
+	 * fastboot case, we'll flip, but if we don't update the pipesrc and
+	 * pfit state, we'll end up with a big fb scanned out into the wrong
+	 * sized surface.
+	 *
+	 * To fix this properly, we need to hoist the checks up into
+	 * compute_mode_changes (or above), check the actual pfit state and
+	 * whether the platform allows pfit disable with pipe active, and only
+	 * then update the pipesrc and pfit state, even on the flip path.
+	 */
+
+	adjusted_mode = &crtc->config.adjusted_mode;
+
+	I915_WRITE(PIPESRC(crtc->pipe),
+		   ((adjusted_mode->crtc_hdisplay - 1) << 16) |
+		   (adjusted_mode->crtc_vdisplay - 1));
+	if (!crtc->config.pch_pfit.enabled &&
+	    (intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_LVDS) ||
+	     intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_EDP))) {
+		I915_WRITE(PF_CTL(crtc->pipe), 0);
+		I915_WRITE(PF_WIN_POS(crtc->pipe), 0);
+		I915_WRITE(PF_WIN_SZ(crtc->pipe), 0);
+	}
+	crtc->config.pipe_src_w = adjusted_mode->crtc_hdisplay;
+	crtc->config.pipe_src_h = adjusted_mode->crtc_vdisplay;
+}
+
 static int
 intel_pipe_set_base(struct drm_crtc *crtc, int x, int y,
 		    struct drm_framebuffer *fb)
@@ -2818,36 +2896,7 @@ intel_pipe_set_base(struct drm_crtc *crtc, int x, int y,
 		return ret;
 	}
 
-	/*
-	 * Update pipe size and adjust fitter if needed: the reason for this is
-	 * that in compute_mode_changes we check the native mode (not the pfit
-	 * mode) to see if we can flip rather than do a full mode set. In the
-	 * fastboot case, we'll flip, but if we don't update the pipesrc and
-	 * pfit state, we'll end up with a big fb scanned out into the wrong
-	 * sized surface.
-	 *
-	 * To fix this properly, we need to hoist the checks up into
-	 * compute_mode_changes (or above), check the actual pfit state and
-	 * whether the platform allows pfit disable with pipe active, and only
-	 * then update the pipesrc and pfit state, even on the flip path.
-	 */
-	if (i915.fastboot) {
-		const struct drm_display_mode *adjusted_mode =
-			&intel_crtc->config.adjusted_mode;
-
-		I915_WRITE(PIPESRC(intel_crtc->pipe),
-			   ((adjusted_mode->crtc_hdisplay - 1) << 16) |
-			   (adjusted_mode->crtc_vdisplay - 1));
-		if (!intel_crtc->config.pch_pfit.enabled &&
-		    (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS) ||
-		     intel_pipe_has_type(crtc, INTEL_OUTPUT_EDP))) {
-			I915_WRITE(PF_CTL(intel_crtc->pipe), 0);
-			I915_WRITE(PF_WIN_POS(intel_crtc->pipe), 0);
-			I915_WRITE(PF_WIN_SZ(intel_crtc->pipe), 0);
-		}
-		intel_crtc->config.pipe_src_w = adjusted_mode->crtc_hdisplay;
-		intel_crtc->config.pipe_src_h = adjusted_mode->crtc_vdisplay;
-	}
+	intel_update_pipe_size(intel_crtc);
 
 	dev_priv->display.update_primary_plane(crtc, fb, x, y);
 
@@ -3472,14 +3521,13 @@ void intel_crtc_wait_for_pending_flips(struct drm_crtc *crtc)
 				       !intel_crtc_has_pending_flip(crtc),
 				       60*HZ) == 0)) {
 		struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
-		unsigned long flags;
 
-		spin_lock_irqsave(&dev->event_lock, flags);
+		spin_lock_irq(&dev->event_lock);
 		if (intel_crtc->unpin_work) {
 			WARN_ONCE(1, "Removing stuck page flip\n");
 			page_flip_completed(intel_crtc);
 		}
-		spin_unlock_irqrestore(&dev->event_lock, flags);
+		spin_unlock_irq(&dev->event_lock);
 	}
 
 	if (crtc->primary->fb) {
@@ -4038,10 +4086,6 @@ static void intel_crtc_enable_planes(struct drm_crtc *crtc)
 	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
 	int pipe = intel_crtc->pipe;
 
-	assert_vblank_disabled(crtc);
-
-	drm_vblank_on(dev, pipe);
-
 	intel_enable_primary_hw_plane(crtc->primary, crtc);
 	intel_enable_planes(crtc);
 	intel_crtc_update_cursor(crtc, true);
@@ -4087,10 +4131,6 @@ static void intel_crtc_disable_planes(struct drm_crtc *crtc)
 	 * consider this a flip to a NULL plane.
 	 */
 	intel_frontbuffer_flip(dev, INTEL_FRONTBUFFER_ALL_MASK(pipe));
-
-	drm_vblank_off(dev, pipe);
-
-	assert_vblank_disabled(crtc);
 }
 
 static void ironlake_crtc_enable(struct drm_crtc *crtc)
@@ -4160,6 +4200,9 @@ static void ironlake_crtc_enable(struct drm_crtc *crtc)
 	if (HAS_PCH_CPT(dev))
 		cpt_verify_modeset(dev, intel_crtc->pipe);
 
+	assert_vblank_disabled(crtc);
+	drm_crtc_vblank_on(crtc);
+
 	intel_crtc_enable_planes(crtc);
 }
 
@@ -4272,6 +4315,9 @@ static void haswell_crtc_enable(struct drm_crtc *crtc)
 		intel_opregion_notify_encoder(encoder, true);
 	}
 
+	assert_vblank_disabled(crtc);
+	drm_crtc_vblank_on(crtc);
+
 	/* If we change the relative order between pipe/planes enabling, we need
 	 * to change the workaround. */
 	haswell_mode_set_planes_workaround(intel_crtc);
@@ -4307,6 +4353,9 @@ static void ironlake_crtc_disable(struct drm_crtc *crtc)
 
 	intel_crtc_disable_planes(crtc);
 
+	drm_crtc_vblank_off(crtc);
+	assert_vblank_disabled(crtc);
+
 	for_each_encoder_on_crtc(dev, crtc, encoder)
 		encoder->disable(encoder);
 
@@ -4369,6 +4418,9 @@ static void haswell_crtc_disable(struct drm_crtc *crtc)
 
 	intel_crtc_disable_planes(crtc);
 
+	drm_crtc_vblank_off(crtc);
+	assert_vblank_disabled(crtc);
+
 	for_each_encoder_on_crtc(dev, crtc, encoder) {
 		intel_opregion_notify_encoder(encoder, false);
 		encoder->disable(encoder);
@@ -4510,20 +4562,6 @@ static unsigned long get_crtc_power_domains(struct drm_crtc *crtc)
 	return mask;
 }
 
-void intel_display_set_init_power(struct drm_i915_private *dev_priv,
-				  bool enable)
-{
-	if (dev_priv->power_domains.init_power_on == enable)
-		return;
-
-	if (enable)
-		intel_display_power_get(dev_priv, POWER_DOMAIN_INIT);
-	else
-		intel_display_power_put(dev_priv, POWER_DOMAIN_INIT);
-
-	dev_priv->power_domains.init_power_on = enable;
-}
-
 static void modeset_update_crtc_power_domains(struct drm_device *dev)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
@@ -4835,6 +4873,9 @@ static void valleyview_crtc_enable(struct drm_crtc *crtc)
 	for_each_encoder_on_crtc(dev, crtc, encoder)
 		encoder->enable(encoder);
 
+	assert_vblank_disabled(crtc);
+	drm_crtc_vblank_on(crtc);
+
 	intel_crtc_enable_planes(crtc);
 
 	/* Underruns don't raise interrupts, so check manually. */
@@ -4892,6 +4933,9 @@ static void i9xx_crtc_enable(struct drm_crtc *crtc)
 	for_each_encoder_on_crtc(dev, crtc, encoder)
 		encoder->enable(encoder);
 
+	assert_vblank_disabled(crtc);
+	drm_crtc_vblank_on(crtc);
+
 	intel_crtc_enable_planes(crtc);
 
 	/*
@@ -4955,9 +4999,6 @@ static void i9xx_crtc_disable(struct drm_crtc *crtc)
 	intel_set_memory_cxsr(dev_priv, false);
 	intel_crtc_disable_planes(crtc);
 
-	for_each_encoder_on_crtc(dev, crtc, encoder)
-		encoder->disable(encoder);
-
 	/*
 	 * On gen2 planes are double buffered but the pipe isn't, so we must
 	 * wait for planes to fully turn off before disabling the pipe.
@@ -4966,6 +5007,12 @@ static void i9xx_crtc_disable(struct drm_crtc *crtc)
 	 */
 	intel_wait_for_vblank(dev, pipe);
 
+	drm_crtc_vblank_off(crtc);
+	assert_vblank_disabled(crtc);
+
+	for_each_encoder_on_crtc(dev, crtc, encoder)
+		encoder->disable(encoder);
+
 	intel_disable_pipe(intel_crtc);
 
 	i9xx_pfit_disable(intel_crtc);
@@ -6434,8 +6481,8 @@ static bool i9xx_get_pipe_config(struct intel_crtc *crtc,
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	uint32_t tmp;
 
-	if (!intel_display_power_enabled(dev_priv,
-					 POWER_DOMAIN_PIPE(crtc->pipe)))
+	if (!intel_display_power_is_enabled(dev_priv,
+					    POWER_DOMAIN_PIPE(crtc->pipe)))
 		return false;
 
 	pipe_config->cpu_transcoder = (enum transcoder) crtc->pipe;
@@ -7021,7 +7068,7 @@ static void haswell_set_pipeconf(struct drm_crtc *crtc)
 	I915_WRITE(GAMMA_MODE(intel_crtc->pipe), GAMMA_MODE_MODE_8BIT);
 	POSTING_READ(GAMMA_MODE(intel_crtc->pipe));
 
-	if (IS_BROADWELL(dev)) {
+	if (IS_BROADWELL(dev) || INTEL_INFO(dev)->gen >= 9) {
 		val = 0;
 
 		switch (intel_crtc->config.pipe_bpp) {
@@ -7444,8 +7491,8 @@ static bool ironlake_get_pipe_config(struct intel_crtc *crtc,
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	uint32_t tmp;
 
-	if (!intel_display_power_enabled(dev_priv,
-					 POWER_DOMAIN_PIPE(crtc->pipe)))
+	if (!intel_display_power_is_enabled(dev_priv,
+					    POWER_DOMAIN_PIPE(crtc->pipe)))
 		return false;
 
 	pipe_config->cpu_transcoder = (enum transcoder) crtc->pipe;
@@ -7638,7 +7685,6 @@ static void hsw_disable_lcpll(struct drm_i915_private *dev_priv,
 static void hsw_restore_lcpll(struct drm_i915_private *dev_priv)
 {
 	uint32_t val;
-	unsigned long irqflags;
 
 	val = I915_READ(LCPLL_CTL);
 
@@ -7658,10 +7704,10 @@ static void hsw_restore_lcpll(struct drm_i915_private *dev_priv)
 	 * to call special forcewake code that doesn't touch runtime PM and
 	 * doesn't enable the forcewake delayed work.
 	 */
-	spin_lock_irqsave(&dev_priv->uncore.lock, irqflags);
+	spin_lock_irq(&dev_priv->uncore.lock);
 	if (dev_priv->uncore.forcewake_count++ == 0)
 		dev_priv->uncore.funcs.force_wake_get(dev_priv, FORCEWAKE_ALL);
-	spin_unlock_irqrestore(&dev_priv->uncore.lock, irqflags);
+	spin_unlock_irq(&dev_priv->uncore.lock);
 
 	if (val & LCPLL_POWER_DOWN_ALLOW) {
 		val &= ~LCPLL_POWER_DOWN_ALLOW;
@@ -7692,10 +7738,10 @@ static void hsw_restore_lcpll(struct drm_i915_private *dev_priv)
 	}
 
 	/* See the big comment above. */
-	spin_lock_irqsave(&dev_priv->uncore.lock, irqflags);
+	spin_lock_irq(&dev_priv->uncore.lock);
 	if (--dev_priv->uncore.forcewake_count == 0)
 		dev_priv->uncore.funcs.force_wake_put(dev_priv, FORCEWAKE_ALL);
-	spin_unlock_irqrestore(&dev_priv->uncore.lock, irqflags);
+	spin_unlock_irq(&dev_priv->uncore.lock);
 }
 
 /*
@@ -7824,7 +7870,8 @@ static void haswell_get_ddi_port_state(struct intel_crtc *crtc,
 	 * DDI E. So just check whether this pipe is wired to DDI E and whether
 	 * the PCH transcoder is on.
 	 */
-	if ((port == PORT_E) && I915_READ(LPT_TRANSCONF) & TRANS_ENABLE) {
+	if (INTEL_INFO(dev)->gen < 9 &&
+	    (port == PORT_E) && I915_READ(LPT_TRANSCONF) & TRANS_ENABLE) {
 		pipe_config->has_pch_encoder = true;
 
 		tmp = I915_READ(FDI_RX_CTL(PIPE_A));
@@ -7843,7 +7890,7 @@ static bool haswell_get_pipe_config(struct intel_crtc *crtc,
 	enum intel_display_power_domain pfit_domain;
 	uint32_t tmp;
 
-	if (!intel_display_power_enabled(dev_priv,
+	if (!intel_display_power_is_enabled(dev_priv,
 					 POWER_DOMAIN_PIPE(crtc->pipe)))
 		return false;
 
@@ -7872,7 +7919,7 @@ static bool haswell_get_pipe_config(struct intel_crtc *crtc,
 			pipe_config->cpu_transcoder = TRANSCODER_EDP;
 	}
 
-	if (!intel_display_power_enabled(dev_priv,
+	if (!intel_display_power_is_enabled(dev_priv,
 			POWER_DOMAIN_TRANSCODER(pipe_config->cpu_transcoder)))
 		return false;
 
@@ -7885,7 +7932,7 @@ static bool haswell_get_pipe_config(struct intel_crtc *crtc,
 	intel_get_pipe_timings(crtc, pipe_config);
 
 	pfit_domain = POWER_DOMAIN_PIPE_PANEL_FITTER(crtc->pipe);
-	if (intel_display_power_enabled(dev_priv, pfit_domain))
+	if (intel_display_power_is_enabled(dev_priv, pfit_domain))
 		ironlake_get_pfit_config(crtc, pipe_config);
 
 	if (IS_HASWELL(dev))
@@ -8255,8 +8302,10 @@ static void i845_update_cursor(struct drm_crtc *crtc, u32 base)
 		intel_crtc->cursor_cntl = 0;
 	}
 
-	if (intel_crtc->cursor_base != base)
+	if (intel_crtc->cursor_base != base) {
 		I915_WRITE(_CURABASE, base);
+		intel_crtc->cursor_base = base;
+	}
 
 	if (intel_crtc->cursor_size != size) {
 		I915_WRITE(CURSIZE, size);
@@ -8296,9 +8345,10 @@ static void i9xx_update_cursor(struct drm_crtc *crtc, u32 base)
 				return;
 		}
 		cntl |= pipe << 28; /* Connect to correct pipe */
+
+		if (IS_HASWELL(dev) || IS_BROADWELL(dev))
+			cntl |= CURSOR_PIPE_CSC_ENABLE;
 	}
-	if (IS_HASWELL(dev) || IS_BROADWELL(dev))
-		cntl |= CURSOR_PIPE_CSC_ENABLE;
 
 	if (intel_crtc->cursor_cntl != cntl) {
 		I915_WRITE(CURCNTR(pipe), cntl);
@@ -8309,6 +8359,8 @@ static void i9xx_update_cursor(struct drm_crtc *crtc, u32 base)
 	/* and commit changes on next vblank */
 	I915_WRITE(CURBASE(pipe), base);
 	POSTING_READ(CURBASE(pipe));
+
+	intel_crtc->cursor_base = base;
 }
 
 /* If no-part of the cursor is visible on the framebuffer, then the GPU may hang... */
@@ -8359,7 +8411,6 @@ static void intel_crtc_update_cursor(struct drm_crtc *crtc,
 		i845_update_cursor(crtc, base);
 	else
 		i9xx_update_cursor(crtc, base);
-	intel_crtc->cursor_base = base;
 }
 
 static bool cursor_size_ok(struct drm_device *dev,
@@ -9023,35 +9074,6 @@ struct drm_display_mode *intel_crtc_mode_get(struct drm_device *dev,
 	return mode;
 }
 
-static void intel_increase_pllclock(struct drm_device *dev,
-				    enum pipe pipe)
-{
-	struct drm_i915_private *dev_priv = dev->dev_private;
-	int dpll_reg = DPLL(pipe);
-	int dpll;
-
-	if (!HAS_GMCH_DISPLAY(dev))
-		return;
-
-	if (!dev_priv->lvds_downclock_avail)
-		return;
-
-	dpll = I915_READ(dpll_reg);
-	if (!HAS_PIPE_CXSR(dev) && (dpll & DISPLAY_RATE_SELECT_FPA1)) {
-		DRM_DEBUG_DRIVER("upclocking LVDS\n");
-
-		assert_panel_unlocked(dev_priv, pipe);
-
-		dpll &= ~DISPLAY_RATE_SELECT_FPA1;
-		I915_WRITE(dpll_reg, dpll);
-		intel_wait_for_vblank(dev, pipe);
-
-		dpll = I915_READ(dpll_reg);
-		if (dpll & DISPLAY_RATE_SELECT_FPA1)
-			DRM_DEBUG_DRIVER("failed to upclock LVDS!\n");
-	}
-}
-
 static void intel_decrease_pllclock(struct drm_crtc *crtc)
 {
 	struct drm_device *dev = crtc->dev;
@@ -9127,199 +9149,16 @@ out:
 	intel_runtime_pm_put(dev_priv);
 }
 
-
-/**
- * intel_mark_fb_busy - mark given planes as busy
- * @dev: DRM device
- * @frontbuffer_bits: bits for the affected planes
- * @ring: optional ring for asynchronous commands
- *
- * This function gets called every time the screen contents change. It can be
- * used to keep e.g. the update rate at the nominal refresh rate with DRRS.
- */
-static void intel_mark_fb_busy(struct drm_device *dev,
-			       unsigned frontbuffer_bits,
-			       struct intel_engine_cs *ring)
-{
-	struct drm_i915_private *dev_priv = dev->dev_private;
-	enum pipe pipe;
-
-	if (!i915.powersave)
-		return;
-
-	for_each_pipe(dev_priv, pipe) {
-		if (!(frontbuffer_bits & INTEL_FRONTBUFFER_ALL_MASK(pipe)))
-			continue;
-
-		intel_increase_pllclock(dev, pipe);
-		if (ring && intel_fbc_enabled(dev))
-			ring->fbc_dirty = true;
-	}
-}
-
-/**
- * intel_fb_obj_invalidate - invalidate frontbuffer object
- * @obj: GEM object to invalidate
- * @ring: set for asynchronous rendering
- *
- * This function gets called every time rendering on the given object starts and
- * frontbuffer caching (fbc, low refresh rate for DRRS, panel self refresh) must
- * be invalidated. If @ring is non-NULL any subsequent invalidation will be delayed
- * until the rendering completes or a flip on this frontbuffer plane is
- * scheduled.
- */
-void intel_fb_obj_invalidate(struct drm_i915_gem_object *obj,
-			     struct intel_engine_cs *ring)
-{
-	struct drm_device *dev = obj->base.dev;
-	struct drm_i915_private *dev_priv = dev->dev_private;
-
-	WARN_ON(!mutex_is_locked(&dev->struct_mutex));
-
-	if (!obj->frontbuffer_bits)
-		return;
-
-	if (ring) {
-		mutex_lock(&dev_priv->fb_tracking.lock);
-		dev_priv->fb_tracking.busy_bits
-			|= obj->frontbuffer_bits;
-		dev_priv->fb_tracking.flip_bits
-			&= ~obj->frontbuffer_bits;
-		mutex_unlock(&dev_priv->fb_tracking.lock);
-	}
-
-	intel_mark_fb_busy(dev, obj->frontbuffer_bits, ring);
-
-	intel_edp_psr_invalidate(dev, obj->frontbuffer_bits);
-}
-
-/**
- * intel_frontbuffer_flush - flush frontbuffer
- * @dev: DRM device
- * @frontbuffer_bits: frontbuffer plane tracking bits
- *
- * This function gets called every time rendering on the given planes has
- * completed and frontbuffer caching can be started again. Flushes will get
- * delayed if they're blocked by some oustanding asynchronous rendering.
- *
- * Can be called without any locks held.
- */
-void intel_frontbuffer_flush(struct drm_device *dev,
-			     unsigned frontbuffer_bits)
-{
-	struct drm_i915_private *dev_priv = dev->dev_private;
-
-	/* Delay flushing when rings are still busy.*/
-	mutex_lock(&dev_priv->fb_tracking.lock);
-	frontbuffer_bits &= ~dev_priv->fb_tracking.busy_bits;
-	mutex_unlock(&dev_priv->fb_tracking.lock);
-
-	intel_mark_fb_busy(dev, frontbuffer_bits, NULL);
-
-	intel_edp_psr_flush(dev, frontbuffer_bits);
-
-	/*
-	 * FIXME: Unconditional fbc flushing here is a rather gross hack and
-	 * needs to be reworked into a proper frontbuffer tracking scheme like
-	 * psr employs.
-	 */
-	if (IS_BROADWELL(dev))
-		gen8_fbc_sw_flush(dev, FBC_REND_CACHE_CLEAN);
-}
-
-/**
- * intel_fb_obj_flush - flush frontbuffer object
- * @obj: GEM object to flush
- * @retire: set when retiring asynchronous rendering
- *
- * This function gets called every time rendering on the given object has
- * completed and frontbuffer caching can be started again. If @retire is true
- * then any delayed flushes will be unblocked.
- */
-void intel_fb_obj_flush(struct drm_i915_gem_object *obj,
-			bool retire)
-{
-	struct drm_device *dev = obj->base.dev;
-	struct drm_i915_private *dev_priv = dev->dev_private;
-	unsigned frontbuffer_bits;
-
-	WARN_ON(!mutex_is_locked(&dev->struct_mutex));
-
-	if (!obj->frontbuffer_bits)
-		return;
-
-	frontbuffer_bits = obj->frontbuffer_bits;
-
-	if (retire) {
-		mutex_lock(&dev_priv->fb_tracking.lock);
-		/* Filter out new bits since rendering started. */
-		frontbuffer_bits &= dev_priv->fb_tracking.busy_bits;
-
-		dev_priv->fb_tracking.busy_bits &= ~frontbuffer_bits;
-		mutex_unlock(&dev_priv->fb_tracking.lock);
-	}
-
-	intel_frontbuffer_flush(dev, frontbuffer_bits);
-}
-
-/**
- * intel_frontbuffer_flip_prepare - prepare asnychronous frontbuffer flip
- * @dev: DRM device
- * @frontbuffer_bits: frontbuffer plane tracking bits
- *
- * This function gets called after scheduling a flip on @obj. The actual
- * frontbuffer flushing will be delayed until completion is signalled with
- * intel_frontbuffer_flip_complete. If an invalidate happens in between this
- * flush will be cancelled.
- *
- * Can be called without any locks held.
- */
-void intel_frontbuffer_flip_prepare(struct drm_device *dev,
-				    unsigned frontbuffer_bits)
-{
-	struct drm_i915_private *dev_priv = dev->dev_private;
-
-	mutex_lock(&dev_priv->fb_tracking.lock);
-	dev_priv->fb_tracking.flip_bits
-		|= frontbuffer_bits;
-	mutex_unlock(&dev_priv->fb_tracking.lock);
-}
-
-/**
- * intel_frontbuffer_flip_complete - complete asynchronous frontbuffer flush
- * @dev: DRM device
- * @frontbuffer_bits: frontbuffer plane tracking bits
- *
- * This function gets called after the flip has been latched and will complete
- * on the next vblank. It will execute the fush if it hasn't been cancalled yet.
- *
- * Can be called without any locks held.
- */
-void intel_frontbuffer_flip_complete(struct drm_device *dev,
-				     unsigned frontbuffer_bits)
-{
-	struct drm_i915_private *dev_priv = dev->dev_private;
-
-	mutex_lock(&dev_priv->fb_tracking.lock);
-	/* Mask any cancelled flips. */
-	frontbuffer_bits &= dev_priv->fb_tracking.flip_bits;
-	dev_priv->fb_tracking.flip_bits &= ~frontbuffer_bits;
-	mutex_unlock(&dev_priv->fb_tracking.lock);
-
-	intel_frontbuffer_flush(dev, frontbuffer_bits);
-}
-
 static void intel_crtc_destroy(struct drm_crtc *crtc)
 {
 	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
 	struct drm_device *dev = crtc->dev;
 	struct intel_unpin_work *work;
-	unsigned long flags;
 
-	spin_lock_irqsave(&dev->event_lock, flags);
+	spin_lock_irq(&dev->event_lock);
 	work = intel_crtc->unpin_work;
 	intel_crtc->unpin_work = NULL;
-	spin_unlock_irqrestore(&dev->event_lock, flags);
+	spin_unlock_irq(&dev->event_lock);
 
 	if (work) {
 		cancel_work_sync(&work->work);
@@ -9365,6 +9204,10 @@ static void do_intel_finish_page_flip(struct drm_device *dev,
 	if (intel_crtc == NULL)
 		return;
 
+	/*
+	 * This is called both by irq handlers and the reset code (to complete
+	 * lost pageflips) so needs the full irqsave spinlocks.
+	 */
 	spin_lock_irqsave(&dev->event_lock, flags);
 	work = intel_crtc->unpin_work;
 
@@ -9446,7 +9289,12 @@ void intel_prepare_page_flip(struct drm_device *dev, int plane)
 		to_intel_crtc(dev_priv->plane_to_crtc_mapping[plane]);
 	unsigned long flags;
 
-	/* NB: An MMIO update of the plane base pointer will also
+
+	/*
+	 * This is called both by irq handlers and the reset code (to complete
+	 * lost pageflips) so needs the full irqsave spinlocks.
+	 *
+	 * NB: An MMIO update of the plane base pointer will also
 	 * generate a page-flip completion irq, i.e. every modeset
 	 * is also accompanied by a spurious intel_prepare_page_flip().
 	 */
@@ -9821,7 +9669,6 @@ static int intel_queue_mmio_flip(struct drm_device *dev,
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
-	unsigned long irq_flags;
 	int ret;
 
 	if (WARN_ON(intel_crtc->mmio_flip.seqno))
@@ -9835,10 +9682,10 @@ static int intel_queue_mmio_flip(struct drm_device *dev,
 		return 0;
 	}
 
-	spin_lock_irqsave(&dev_priv->mmio_flip_lock, irq_flags);
+	spin_lock_irq(&dev_priv->mmio_flip_lock);
 	intel_crtc->mmio_flip.seqno = obj->last_write_seqno;
 	intel_crtc->mmio_flip.ring_id = obj->ring->id;
-	spin_unlock_irqrestore(&dev_priv->mmio_flip_lock, irq_flags);
+	spin_unlock_irq(&dev_priv->mmio_flip_lock);
 
 	/*
 	 * Double check to catch cases where irq fired before
@@ -9903,18 +9750,19 @@ void intel_check_page_flip(struct drm_device *dev, int pipe)
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	struct drm_crtc *crtc = dev_priv->pipe_to_crtc_mapping[pipe];
 	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
-	unsigned long flags;
+
+	WARN_ON(!in_irq());
 
 	if (crtc == NULL)
 		return;
 
-	spin_lock_irqsave(&dev->event_lock, flags);
+	spin_lock(&dev->event_lock);
 	if (intel_crtc->unpin_work && __intel_pageflip_stall_check(dev, crtc)) {
 		WARN_ONCE(1, "Kicking stuck page flip: queued at %d, now %d\n",
 			 intel_crtc->unpin_work->flip_queued_vblank, drm_vblank_count(dev, pipe));
 		page_flip_completed(intel_crtc);
 	}
-	spin_unlock_irqrestore(&dev->event_lock, flags);
+	spin_unlock(&dev->event_lock);
 }
 
 static int intel_crtc_page_flip(struct drm_crtc *crtc,
@@ -9930,7 +9778,6 @@ static int intel_crtc_page_flip(struct drm_crtc *crtc,
 	enum pipe pipe = intel_crtc->pipe;
 	struct intel_unpin_work *work;
 	struct intel_engine_cs *ring;
-	unsigned long flags;
 	int ret;
 
 	/*
@@ -9971,7 +9818,7 @@ static int intel_crtc_page_flip(struct drm_crtc *crtc,
 		goto free_work;
 
 	/* We borrow the event spin lock for protecting unpin_work */
-	spin_lock_irqsave(&dev->event_lock, flags);
+	spin_lock_irq(&dev->event_lock);
 	if (intel_crtc->unpin_work) {
 		/* Before declaring the flip queue wedged, check if
 		 * the hardware completed the operation behind our backs.
@@ -9981,7 +9828,7 @@ static int intel_crtc_page_flip(struct drm_crtc *crtc,
 			page_flip_completed(intel_crtc);
 		} else {
 			DRM_DEBUG_DRIVER("flip queue: crtc already busy\n");
-			spin_unlock_irqrestore(&dev->event_lock, flags);
+			spin_unlock_irq(&dev->event_lock);
 
 			drm_crtc_vblank_put(crtc);
 			kfree(work);
@@ -9989,7 +9836,7 @@ static int intel_crtc_page_flip(struct drm_crtc *crtc,
 		}
 	}
 	intel_crtc->unpin_work = work;
-	spin_unlock_irqrestore(&dev->event_lock, flags);
+	spin_unlock_irq(&dev->event_lock);
 
 	if (atomic_read(&intel_crtc->unpin_work_count) >= 2)
 		flush_workqueue(dev_priv->wq);
@@ -10076,9 +9923,9 @@ cleanup_pending:
 	mutex_unlock(&dev->struct_mutex);
 
 cleanup:
-	spin_lock_irqsave(&dev->event_lock, flags);
+	spin_lock_irq(&dev->event_lock);
 	intel_crtc->unpin_work = NULL;
-	spin_unlock_irqrestore(&dev->event_lock, flags);
+	spin_unlock_irq(&dev->event_lock);
 
 	drm_crtc_vblank_put(crtc);
 free_work:
@@ -10089,9 +9936,9 @@ out_hang:
 		intel_crtc_wait_for_pending_flips(crtc);
 		ret = intel_pipe_set_base(crtc, crtc->x, crtc->y, fb);
 		if (ret == 0 && event) {
-			spin_lock_irqsave(&dev->event_lock, flags);
+			spin_lock_irq(&dev->event_lock);
 			drm_send_vblank_event(dev, pipe, event);
-			spin_unlock_irqrestore(&dev->event_lock, flags);
+			spin_unlock_irq(&dev->event_lock);
 		}
 	}
 	return ret;
@@ -11677,7 +11524,7 @@ static bool ibx_pch_dpll_get_hw_state(struct drm_i915_private *dev_priv,
 {
 	uint32_t val;
 
-	if (!intel_display_power_enabled(dev_priv, POWER_DOMAIN_PLLS))
+	if (!intel_display_power_is_enabled(dev_priv, POWER_DOMAIN_PLLS))
 		return false;
 
 	val = I915_READ(PCH_DPLL(pll->id));
@@ -11811,89 +11658,37 @@ disable_unpin:
 }
 
 static int
-intel_primary_plane_setplane(struct drm_plane *plane, struct drm_crtc *crtc,
-			     struct drm_framebuffer *fb, int crtc_x, int crtc_y,
-			     unsigned int crtc_w, unsigned int crtc_h,
-			     uint32_t src_x, uint32_t src_y,
-			     uint32_t src_w, uint32_t src_h)
+intel_check_primary_plane(struct drm_plane *plane,
+			  struct intel_plane_state *state)
+{
+	struct drm_crtc *crtc = state->crtc;
+	struct drm_framebuffer *fb = state->fb;
+	struct drm_rect *dest = &state->dst;
+	struct drm_rect *src = &state->src;
+	const struct drm_rect *clip = &state->clip;
+
+	return drm_plane_helper_check_update(plane, crtc, fb,
+					    src, dest, clip,
+					    DRM_PLANE_HELPER_NO_SCALING,
+					    DRM_PLANE_HELPER_NO_SCALING,
+					    false, true, &state->visible);
+}
+
+static int
+intel_commit_primary_plane(struct drm_plane *plane,
+			   struct intel_plane_state *state)
 {
+	struct drm_crtc *crtc = state->crtc;
+	struct drm_framebuffer *fb = state->fb;
 	struct drm_device *dev = crtc->dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
 	struct drm_i915_gem_object *obj = intel_fb_obj(fb);
 	struct drm_i915_gem_object *old_obj = intel_fb_obj(plane->fb);
-	struct drm_rect dest = {
-		/* integer pixels */
-		.x1 = crtc_x,
-		.y1 = crtc_y,
-		.x2 = crtc_x + crtc_w,
-		.y2 = crtc_y + crtc_h,
-	};
-	struct drm_rect src = {
-		/* 16.16 fixed point */
-		.x1 = src_x,
-		.y1 = src_y,
-		.x2 = src_x + src_w,
-		.y2 = src_y + src_h,
-	};
-	const struct drm_rect clip = {
-		/* integer pixels */
-		.x2 = intel_crtc->active ? intel_crtc->config.pipe_src_w : 0,
-		.y2 = intel_crtc->active ? intel_crtc->config.pipe_src_h : 0,
-	};
-	const struct {
-		int crtc_x, crtc_y;
-		unsigned int crtc_w, crtc_h;
-		uint32_t src_x, src_y, src_w, src_h;
-	} orig = {
-		.crtc_x = crtc_x,
-		.crtc_y = crtc_y,
-		.crtc_w = crtc_w,
-		.crtc_h = crtc_h,
-		.src_x = src_x,
-		.src_y = src_y,
-		.src_w = src_w,
-		.src_h = src_h,
-	};
 	struct intel_plane *intel_plane = to_intel_plane(plane);
-	bool visible;
+	struct drm_rect *src = &state->src;
 	int ret;
 
-	ret = drm_plane_helper_check_update(plane, crtc, fb,
-					    &src, &dest, &clip,
-					    DRM_PLANE_HELPER_NO_SCALING,
-					    DRM_PLANE_HELPER_NO_SCALING,
-					    false, true, &visible);
-
-	if (ret)
-		return ret;
-
-	/*
-	 * If the CRTC isn't enabled, we're just pinning the framebuffer,
-	 * updating the fb pointer, and returning without touching the
-	 * hardware.  This allows us to later do a drmModeSetCrtc with fb=-1 to
-	 * turn on the display with all planes setup as desired.
-	 */
-	if (!crtc->enabled) {
-		mutex_lock(&dev->struct_mutex);
-
-		/*
-		 * If we already called setplane while the crtc was disabled,
-		 * we may have an fb pinned; unpin it.
-		 */
-		if (plane->fb)
-			intel_unpin_fb_obj(old_obj);
-
-		i915_gem_track_fb(old_obj, obj,
-				  INTEL_FRONTBUFFER_PRIMARY(intel_crtc->pipe));
-
-		/* Pin and return without programming hardware */
-		ret = intel_pin_and_fence_fb_obj(dev, obj, NULL);
-		mutex_unlock(&dev->struct_mutex);
-
-		return ret;
-	}
-
 	intel_crtc_wait_for_pending_flips(crtc);
 
 	/*
@@ -11902,7 +11697,7 @@ intel_primary_plane_setplane(struct drm_plane *plane, struct drm_crtc *crtc,
 	 * happens if userspace explicitly disables the plane by passing fb=0
 	 * because plane->fb still gets set and pinned.
 	 */
-	if (!visible) {
+	if (!state->visible) {
 		mutex_lock(&dev->struct_mutex);
 
 		/*
@@ -11949,7 +11744,7 @@ intel_primary_plane_setplane(struct drm_plane *plane, struct drm_crtc *crtc,
 				intel_disable_fbc(dev);
 			}
 		}
-		ret = intel_pipe_set_base(crtc, src.x1, src.y1, fb);
+		ret = intel_pipe_set_base(crtc, src->x1, src->y1, fb);
 		if (ret)
 			return ret;
 
@@ -11957,19 +11752,62 @@ intel_primary_plane_setplane(struct drm_plane *plane, struct drm_crtc *crtc,
 			intel_enable_primary_hw_plane(plane, crtc);
 	}
 
-	intel_plane->crtc_x = orig.crtc_x;
-	intel_plane->crtc_y = orig.crtc_y;
-	intel_plane->crtc_w = orig.crtc_w;
-	intel_plane->crtc_h = orig.crtc_h;
-	intel_plane->src_x = orig.src_x;
-	intel_plane->src_y = orig.src_y;
-	intel_plane->src_w = orig.src_w;
-	intel_plane->src_h = orig.src_h;
+	intel_plane->crtc_x = state->orig_dst.x1;
+	intel_plane->crtc_y = state->orig_dst.y1;
+	intel_plane->crtc_w = drm_rect_width(&state->orig_dst);
+	intel_plane->crtc_h = drm_rect_height(&state->orig_dst);
+	intel_plane->src_x = state->orig_src.x1;
+	intel_plane->src_y = state->orig_src.y1;
+	intel_plane->src_w = drm_rect_width(&state->orig_src);
+	intel_plane->src_h = drm_rect_height(&state->orig_src);
 	intel_plane->obj = obj;
 
 	return 0;
 }
 
+static int
+intel_primary_plane_setplane(struct drm_plane *plane, struct drm_crtc *crtc,
+			     struct drm_framebuffer *fb, int crtc_x, int crtc_y,
+			     unsigned int crtc_w, unsigned int crtc_h,
+			     uint32_t src_x, uint32_t src_y,
+			     uint32_t src_w, uint32_t src_h)
+{
+	struct intel_plane_state state;
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	int ret;
+
+	state.crtc = crtc;
+	state.fb = fb;
+
+	/* sample coordinates in 16.16 fixed point */
+	state.src.x1 = src_x;
+	state.src.x2 = src_x + src_w;
+	state.src.y1 = src_y;
+	state.src.y2 = src_y + src_h;
+
+	/* integer pixels */
+	state.dst.x1 = crtc_x;
+	state.dst.x2 = crtc_x + crtc_w;
+	state.dst.y1 = crtc_y;
+	state.dst.y2 = crtc_y + crtc_h;
+
+	state.clip.x1 = 0;
+	state.clip.y1 = 0;
+	state.clip.x2 = intel_crtc->active ? intel_crtc->config.pipe_src_w : 0;
+	state.clip.y2 = intel_crtc->active ? intel_crtc->config.pipe_src_h : 0;
+
+	state.orig_src = state.src;
+	state.orig_dst = state.dst;
+
+	ret = intel_check_primary_plane(plane, &state);
+	if (ret)
+		return ret;
+
+	intel_commit_primary_plane(plane, &state);
+
+	return 0;
+}
+
 /* Common destruction function for both primary and cursor planes */
 static void intel_plane_destroy(struct drm_plane *plane)
 {
@@ -12044,51 +11882,41 @@ intel_cursor_plane_disable(struct drm_plane *plane)
 }
 
 static int
-intel_cursor_plane_update(struct drm_plane *plane, struct drm_crtc *crtc,
-			  struct drm_framebuffer *fb, int crtc_x, int crtc_y,
-			  unsigned int crtc_w, unsigned int crtc_h,
-			  uint32_t src_x, uint32_t src_y,
-			  uint32_t src_w, uint32_t src_h)
+intel_check_cursor_plane(struct drm_plane *plane,
+			 struct intel_plane_state *state)
 {
-	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
-	struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb);
-	struct drm_i915_gem_object *obj = intel_fb->obj;
-	struct drm_rect dest = {
-		/* integer pixels */
-		.x1 = crtc_x,
-		.y1 = crtc_y,
-		.x2 = crtc_x + crtc_w,
-		.y2 = crtc_y + crtc_h,
-	};
-	struct drm_rect src = {
-		/* 16.16 fixed point */
-		.x1 = src_x,
-		.y1 = src_y,
-		.x2 = src_x + src_w,
-		.y2 = src_y + src_h,
-	};
-	const struct drm_rect clip = {
-		/* integer pixels */
-		.x2 = intel_crtc->active ? intel_crtc->config.pipe_src_w : 0,
-		.y2 = intel_crtc->active ? intel_crtc->config.pipe_src_h : 0,
-	};
-	bool visible;
-	int ret;
+	struct drm_crtc *crtc = state->crtc;
+	struct drm_framebuffer *fb = state->fb;
+	struct drm_rect *dest = &state->dst;
+	struct drm_rect *src = &state->src;
+	const struct drm_rect *clip = &state->clip;
 
-	ret = drm_plane_helper_check_update(plane, crtc, fb,
-					    &src, &dest, &clip,
+	return drm_plane_helper_check_update(plane, crtc, fb,
+					    src, dest, clip,
 					    DRM_PLANE_HELPER_NO_SCALING,
 					    DRM_PLANE_HELPER_NO_SCALING,
-					    true, true, &visible);
-	if (ret)
-		return ret;
+					    true, true, &state->visible);
+}
 
-	crtc->cursor_x = crtc_x;
-	crtc->cursor_y = crtc_y;
+static int
+intel_commit_cursor_plane(struct drm_plane *plane,
+			  struct intel_plane_state *state)
+{
+	struct drm_crtc *crtc = state->crtc;
+	struct drm_framebuffer *fb = state->fb;
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb);
+	struct drm_i915_gem_object *obj = intel_fb->obj;
+	int crtc_w, crtc_h;
+
+	crtc->cursor_x = state->orig_dst.x1;
+	crtc->cursor_y = state->orig_dst.y1;
 	if (fb != crtc->cursor->fb) {
+		crtc_w = drm_rect_width(&state->orig_dst);
+		crtc_h = drm_rect_height(&state->orig_dst);
 		return intel_crtc_cursor_set_obj(crtc, obj, crtc_w, crtc_h);
 	} else {
-		intel_crtc_update_cursor(crtc, visible);
+		intel_crtc_update_cursor(crtc, state->visible);
 
 		intel_frontbuffer_flip(crtc->dev,
 				       INTEL_FRONTBUFFER_CURSOR(intel_crtc->pipe));
@@ -12096,6 +11924,48 @@ intel_cursor_plane_update(struct drm_plane *plane, struct drm_crtc *crtc,
 		return 0;
 	}
 }
+
+static int
+intel_cursor_plane_update(struct drm_plane *plane, struct drm_crtc *crtc,
+			  struct drm_framebuffer *fb, int crtc_x, int crtc_y,
+			  unsigned int crtc_w, unsigned int crtc_h,
+			  uint32_t src_x, uint32_t src_y,
+			  uint32_t src_w, uint32_t src_h)
+{
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	struct intel_plane_state state;
+	int ret;
+
+	state.crtc = crtc;
+	state.fb = fb;
+
+	/* sample coordinates in 16.16 fixed point */
+	state.src.x1 = src_x;
+	state.src.x2 = src_x + src_w;
+	state.src.y1 = src_y;
+	state.src.y2 = src_y + src_h;
+
+	/* integer pixels */
+	state.dst.x1 = crtc_x;
+	state.dst.x2 = crtc_x + crtc_w;
+	state.dst.y1 = crtc_y;
+	state.dst.y2 = crtc_y + crtc_h;
+
+	state.clip.x1 = 0;
+	state.clip.y1 = 0;
+	state.clip.x2 = intel_crtc->active ? intel_crtc->config.pipe_src_w : 0;
+	state.clip.y2 = intel_crtc->active ? intel_crtc->config.pipe_src_h : 0;
+
+	state.orig_src = state.src;
+	state.orig_dst = state.dst;
+
+	ret = intel_check_cursor_plane(plane, &state);
+	if (ret)
+		return ret;
+
+	return intel_commit_cursor_plane(plane, &state);
+}
+
 static const struct drm_plane_funcs intel_cursor_plane_funcs = {
 	.update_plane = intel_cursor_plane_update,
 	.disable_plane = intel_cursor_plane_disable,
@@ -12284,6 +12154,9 @@ static bool intel_crt_present(struct drm_device *dev)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
 
+	if (INTEL_INFO(dev)->gen >= 9)
+		return false;
+
 	if (IS_ULT(dev))
 		return false;
 
@@ -12636,8 +12509,12 @@ static void intel_init_display(struct drm_device *dev)
 		dev_priv->display.crtc_enable = haswell_crtc_enable;
 		dev_priv->display.crtc_disable = haswell_crtc_disable;
 		dev_priv->display.off = ironlake_crtc_off;
-		dev_priv->display.update_primary_plane =
-			ironlake_update_primary_plane;
+		if (INTEL_INFO(dev)->gen >= 9)
+			dev_priv->display.update_primary_plane =
+				skylake_update_primary_plane;
+		else
+			dev_priv->display.update_primary_plane =
+				ironlake_update_primary_plane;
 	} else if (HAS_PCH_SPLIT(dev)) {
 		dev_priv->display.get_pipe_config = ironlake_get_pipe_config;
 		dev_priv->display.get_plane_config = ironlake_get_plane_config;
@@ -12721,6 +12598,10 @@ static void intel_init_display(struct drm_device *dev)
 		dev_priv->display.modeset_global_resources =
 			valleyview_modeset_global_resources;
 		dev_priv->display.write_eld = ironlake_write_eld;
+	} else if (INTEL_INFO(dev)->gen >= 9) {
+		dev_priv->display.write_eld = haswell_write_eld;
+		dev_priv->display.modeset_global_resources =
+			haswell_modeset_global_resources;
 	}
 
 	/* Default just returns -ENODEV to indicate unsupported */
@@ -12948,11 +12829,6 @@ void intel_modeset_init_hw(struct drm_device *dev)
 	intel_enable_gt_powersave(dev);
 }
 
-void intel_modeset_suspend_hw(struct drm_device *dev)
-{
-	intel_suspend_hw(dev);
-}
-
 void intel_modeset_init(struct drm_device *dev)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
@@ -13288,7 +13164,7 @@ void i915_redisable_vga(struct drm_device *dev)
 	 * level, just check if the power well is enabled instead of trying to
 	 * follow the "don't touch the power well if we don't need it" policy
 	 * the rest of the driver uses. */
-	if (!intel_display_power_enabled(dev_priv, POWER_DOMAIN_VGA))
+	if (!intel_display_power_is_enabled(dev_priv, POWER_DOMAIN_VGA))
 		return;
 
 	i915_redisable_vga_power_on(dev);
@@ -13509,9 +13385,7 @@ void intel_modeset_cleanup(struct drm_device *dev)
 	 * Too much stuff here (turning of rps, connectors, ...) would
 	 * experience fancy races otherwise.
 	 */
-	drm_irq_uninstall(dev);
-	intel_hpd_cancel_work(dev_priv);
-	dev_priv->pm._irqs_disabled = true;
+	intel_irq_uninstall(dev_priv);
 
 	/*
 	 * Due to the hpd irq storm handling the hotplug work can re-arm the
@@ -13666,8 +13540,8 @@ intel_display_capture_error_state(struct drm_device *dev)
 
 	for_each_pipe(dev_priv, i) {
 		error->pipe[i].power_domain_on =
-			intel_display_power_enabled_unlocked(dev_priv,
-							   POWER_DOMAIN_PIPE(i));
+			__intel_display_power_is_enabled(dev_priv,
+							 POWER_DOMAIN_PIPE(i));
 		if (!error->pipe[i].power_domain_on)
 			continue;
 
@@ -13702,7 +13576,7 @@ intel_display_capture_error_state(struct drm_device *dev)
 		enum transcoder cpu_transcoder = transcoders[i];
 
 		error->transcoder[i].power_domain_on =
-			intel_display_power_enabled_unlocked(dev_priv,
+			__intel_display_power_is_enabled(dev_priv,
 				POWER_DOMAIN_TRANSCODER(cpu_transcoder));
 		if (!error->transcoder[i].power_domain_on)
 			continue;
@@ -13786,9 +13660,8 @@ void intel_modeset_preclose(struct drm_device *dev, struct drm_file *file)
 
 	for_each_intel_crtc(dev, crtc) {
 		struct intel_unpin_work *work;
-		unsigned long irqflags;
 
-		spin_lock_irqsave(&dev->event_lock, irqflags);
+		spin_lock_irq(&dev->event_lock);
 
 		work = crtc->unpin_work;
 
@@ -13798,6 +13671,6 @@ void intel_modeset_preclose(struct drm_device *dev, struct drm_file *file)
 			work->event = NULL;
 		}
 
-		spin_unlock_irqrestore(&dev->event_lock, irqflags);
+		spin_unlock_irq(&dev->event_lock);
 	}
 }

drivers/gpu/drm/i915/intel_dp.c

@@ -225,7 +225,7 @@ intel_dp_mode_valid(struct drm_connector *connector,
 }
 
 static uint32_t
-pack_aux(uint8_t *src, int src_bytes)
+pack_aux(const uint8_t *src, int src_bytes)
 {
 	int	i;
 	uint32_t v = 0;
@@ -661,6 +661,16 @@ static uint32_t vlv_get_aux_clock_divider(struct intel_dp *intel_dp, int index)
 	return index ? 0 : 100;
 }
 
+static uint32_t skl_get_aux_clock_divider(struct intel_dp *intel_dp, int index)
+{
+	/*
+	 * SKL doesn't need us to program the AUX clock divider (Hardware will
+	 * derive the clock from CDCLK automatically). We still implement the
+	 * get_aux_clock_divider vfunc to plug-in into the existing code.
+	 */
+	return index ? 0 : 1;
+}
+
 static uint32_t i9xx_get_aux_send_ctl(struct intel_dp *intel_dp,
 				      bool has_aux_irq,
 				      int send_bytes,
@@ -691,9 +701,24 @@ static uint32_t i9xx_get_aux_send_ctl(struct intel_dp *intel_dp,
 	       (aux_clock_divider << DP_AUX_CH_CTL_BIT_CLOCK_2X_SHIFT);
 }
 
+static uint32_t skl_get_aux_send_ctl(struct intel_dp *intel_dp,
+				      bool has_aux_irq,
+				      int send_bytes,
+				      uint32_t unused)
+{
+	return DP_AUX_CH_CTL_SEND_BUSY |
+	       DP_AUX_CH_CTL_DONE |
+	       (has_aux_irq ? DP_AUX_CH_CTL_INTERRUPT : 0) |
+	       DP_AUX_CH_CTL_TIME_OUT_ERROR |
+	       DP_AUX_CH_CTL_TIME_OUT_1600us |
+	       DP_AUX_CH_CTL_RECEIVE_ERROR |
+	       (send_bytes << DP_AUX_CH_CTL_MESSAGE_SIZE_SHIFT) |
+	       DP_AUX_CH_CTL_SYNC_PULSE_SKL(32);
+}
+
 static int
 intel_dp_aux_ch(struct intel_dp *intel_dp,
-		uint8_t *send, int send_bytes,
+		const uint8_t *send, int send_bytes,
 		uint8_t *recv, int recv_size)
 {
 	struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
@@ -925,7 +950,16 @@ intel_dp_aux_init(struct intel_dp *intel_dp, struct intel_connector *connector)
 		BUG();
 	}
 
-	if (!HAS_DDI(dev))
+	/*
+	 * The AUX_CTL register is usually DP_CTL + 0x10.
+	 *
+	 * On Haswell and Broadwell though:
+	 *   - Both port A DDI_BUF_CTL and DDI_AUX_CTL are on the CPU
+	 *   - Port B/C/D AUX channels are on the PCH, DDI_BUF_CTL on the CPU
+	 *
+	 * Skylake moves AUX_CTL back next to DDI_BUF_CTL, on the CPU.
+	 */
+	if (!IS_HASWELL(dev) && !IS_BROADWELL(dev))
 		intel_dp->aux_ch_ctl_reg = intel_dp->output_reg + 0x10;
 
 	intel_dp->aux.name = name;
@@ -1819,7 +1853,7 @@ static bool intel_dp_get_hw_state(struct intel_encoder *encoder,
 	u32 tmp;
 
 	power_domain = intel_display_port_power_domain(encoder);
-	if (!intel_display_power_enabled(dev_priv, power_domain))
+	if (!intel_display_power_is_enabled(dev_priv, power_domain))
 		return false;
 
 	tmp = I915_READ(intel_dp->output_reg);
@@ -1995,10 +2029,8 @@ static void intel_edp_psr_write_vsc(struct intel_dp *intel_dp,
 	POSTING_READ(ctl_reg);
 }
 
-static void intel_edp_psr_setup(struct intel_dp *intel_dp)
+static void intel_edp_psr_setup_vsc(struct intel_dp *intel_dp)
 {
-	struct drm_device *dev = intel_dp_to_dev(intel_dp);
-	struct drm_i915_private *dev_priv = dev->dev_private;
 	struct edp_vsc_psr psr_vsc;
 
 	/* Prepare VSC packet as per EDP 1.3 spec, Table 3.10 */
@@ -2008,10 +2040,6 @@ static void intel_edp_psr_setup(struct intel_dp *intel_dp)
 	psr_vsc.sdp_header.HB2 = 0x2;
 	psr_vsc.sdp_header.HB3 = 0x8;
 	intel_edp_psr_write_vsc(intel_dp, &psr_vsc);
-
-	/* Avoid continuous PSR exit by masking memup and hpd */
-	I915_WRITE(EDP_PSR_DEBUG_CTL(dev), EDP_PSR_DEBUG_MASK_MEMUP |
-		   EDP_PSR_DEBUG_MASK_HPD | EDP_PSR_DEBUG_MASK_LPSP);
 }
 
 static void intel_edp_psr_enable_sink(struct intel_dp *intel_dp)
@@ -2021,8 +2049,17 @@ static void intel_edp_psr_enable_sink(struct intel_dp *intel_dp)
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	uint32_t aux_clock_divider;
 	int precharge = 0x3;
-	int msg_size = 5;       /* Header(4) + Message(1) */
 	bool only_standby = false;
+	static const uint8_t aux_msg[] = {
+		[0] = DP_AUX_NATIVE_WRITE << 4,
+		[1] = DP_SET_POWER >> 8,
+		[2] = DP_SET_POWER & 0xff,
+		[3] = 1 - 1,
+		[4] = DP_SET_POWER_D0,
+	};
+	int i;
+
+	BUILD_BUG_ON(sizeof(aux_msg) > 20);
 
 	aux_clock_divider = intel_dp->get_aux_clock_divider(intel_dp, 0);
 
@@ -2038,11 +2075,13 @@ static void intel_edp_psr_enable_sink(struct intel_dp *intel_dp)
 				   DP_PSR_ENABLE | DP_PSR_MAIN_LINK_ACTIVE);
 
 	/* Setup AUX registers */
-	I915_WRITE(EDP_PSR_AUX_DATA1(dev), EDP_PSR_DPCD_COMMAND);
-	I915_WRITE(EDP_PSR_AUX_DATA2(dev), EDP_PSR_DPCD_NORMAL_OPERATION);
+	for (i = 0; i < sizeof(aux_msg); i += 4)
+		I915_WRITE(EDP_PSR_AUX_DATA1(dev) + i,
+			   pack_aux(&aux_msg[i], sizeof(aux_msg) - i));
+
 	I915_WRITE(EDP_PSR_AUX_CTL(dev),
 		   DP_AUX_CH_CTL_TIME_OUT_400us |
-		   (msg_size << DP_AUX_CH_CTL_MESSAGE_SIZE_SHIFT) |
+		   (sizeof(aux_msg) << DP_AUX_CH_CTL_MESSAGE_SIZE_SHIFT) |
 		   (precharge << DP_AUX_CH_CTL_PRECHARGE_2US_SHIFT) |
 		   (aux_clock_divider << DP_AUX_CH_CTL_BIT_CLOCK_2X_SHIFT));
 }
@@ -2131,10 +2170,7 @@ static void intel_edp_psr_do_enable(struct intel_dp *intel_dp)
 	WARN_ON(dev_priv->psr.active);
 	lockdep_assert_held(&dev_priv->psr.lock);
 
-	/* Enable PSR on the panel */
-	intel_edp_psr_enable_sink(intel_dp);
-
-	/* Enable PSR on the host */
+	/* Enable/Re-enable PSR on the host */
 	intel_edp_psr_enable_source(intel_dp);
 
 	dev_priv->psr.active = true;
@@ -2158,17 +2194,25 @@ void intel_edp_psr_enable(struct intel_dp *intel_dp)
 	mutex_lock(&dev_priv->psr.lock);
 	if (dev_priv->psr.enabled) {
 		DRM_DEBUG_KMS("PSR already in use\n");
-		mutex_unlock(&dev_priv->psr.lock);
-		return;
+		goto unlock;
 	}
 
+	if (!intel_edp_psr_match_conditions(intel_dp))
+		goto unlock;
+
 	dev_priv->psr.busy_frontbuffer_bits = 0;
 
-	/* Setup PSR once */
-	intel_edp_psr_setup(intel_dp);
+	intel_edp_psr_setup_vsc(intel_dp);
 
-	if (intel_edp_psr_match_conditions(intel_dp))
-		dev_priv->psr.enabled = intel_dp;
+	/* Avoid continuous PSR exit by masking memup and hpd */
+	I915_WRITE(EDP_PSR_DEBUG_CTL(dev), EDP_PSR_DEBUG_MASK_MEMUP |
+		   EDP_PSR_DEBUG_MASK_HPD | EDP_PSR_DEBUG_MASK_LPSP);
+
+	/* Enable PSR on the panel */
+	intel_edp_psr_enable_sink(intel_dp);
+
+	dev_priv->psr.enabled = intel_dp;
+unlock:
 	mutex_unlock(&dev_priv->psr.lock);
 }
 
@@ -2209,6 +2253,17 @@ static void intel_edp_psr_work(struct work_struct *work)
 		container_of(work, typeof(*dev_priv), psr.work.work);
 	struct intel_dp *intel_dp = dev_priv->psr.enabled;
 
+	/* We have to make sure PSR is ready for re-enable
+	 * otherwise it keeps disabled until next full enable/disable cycle.
+	 * PSR might take some time to get fully disabled
+	 * and be ready for re-enable.
+	 */
+	if (wait_for((I915_READ(EDP_PSR_STATUS_CTL(dev_priv->dev)) &
+		      EDP_PSR_STATUS_STATE_MASK) == 0, 50)) {
+		DRM_ERROR("Timed out waiting for PSR Idle for re-enable\n");
+		return;
+	}
+
 	mutex_lock(&dev_priv->psr.lock);
 	intel_dp = dev_priv->psr.enabled;
 
@@ -2680,6 +2735,15 @@ static void chv_pre_enable_dp(struct intel_encoder *encoder)
 
 	mutex_lock(&dev_priv->dpio_lock);
 
+	/* allow hardware to manage TX FIFO reset source */
+	val = vlv_dpio_read(dev_priv, pipe, VLV_PCS01_DW11(ch));
+	val &= ~DPIO_LANEDESKEW_STRAP_OVRD;
+	vlv_dpio_write(dev_priv, pipe, VLV_PCS01_DW11(ch), val);
+
+	val = vlv_dpio_read(dev_priv, pipe, VLV_PCS23_DW11(ch));
+	val &= ~DPIO_LANEDESKEW_STRAP_OVRD;
+	vlv_dpio_write(dev_priv, pipe, VLV_PCS23_DW11(ch), val);
+
 	/* Deassert soft data lane reset*/
 	val = vlv_dpio_read(dev_priv, pipe, VLV_PCS01_DW1(ch));
 	val |= CHV_PCS_REQ_SOFTRESET_EN;
@@ -2836,7 +2900,9 @@ intel_dp_voltage_max(struct intel_dp *intel_dp)
 	struct drm_device *dev = intel_dp_to_dev(intel_dp);
 	enum port port = dp_to_dig_port(intel_dp)->port;
 
-	if (IS_VALLEYVIEW(dev))
+	if (INTEL_INFO(dev)->gen >= 9)
+		return DP_TRAIN_VOLTAGE_SWING_LEVEL_2;
+	else if (IS_VALLEYVIEW(dev))
 		return DP_TRAIN_VOLTAGE_SWING_LEVEL_3;
 	else if (IS_GEN7(dev) && port == PORT_A)
 		return DP_TRAIN_VOLTAGE_SWING_LEVEL_2;
@@ -2852,7 +2918,18 @@ intel_dp_pre_emphasis_max(struct intel_dp *intel_dp, uint8_t voltage_swing)
 	struct drm_device *dev = intel_dp_to_dev(intel_dp);
 	enum port port = dp_to_dig_port(intel_dp)->port;
 
-	if (IS_HASWELL(dev) || IS_BROADWELL(dev)) {
+	if (INTEL_INFO(dev)->gen >= 9) {
+		switch (voltage_swing & DP_TRAIN_VOLTAGE_SWING_MASK) {
+		case DP_TRAIN_VOLTAGE_SWING_LEVEL_0:
+			return DP_TRAIN_PRE_EMPH_LEVEL_3;
+		case DP_TRAIN_VOLTAGE_SWING_LEVEL_1:
+			return DP_TRAIN_PRE_EMPH_LEVEL_2;
+		case DP_TRAIN_VOLTAGE_SWING_LEVEL_2:
+			return DP_TRAIN_PRE_EMPH_LEVEL_1;
+		default:
+			return DP_TRAIN_PRE_EMPH_LEVEL_0;
+		}
+	} else if (IS_HASWELL(dev) || IS_BROADWELL(dev)) {
 		switch (voltage_swing & DP_TRAIN_VOLTAGE_SWING_MASK) {
 		case DP_TRAIN_VOLTAGE_SWING_LEVEL_0:
 			return DP_TRAIN_PRE_EMPH_LEVEL_3;
@@ -3088,12 +3165,26 @@ static uint32_t intel_chv_signal_levels(struct intel_dp *intel_dp)
 	/* Clear calc init */
 	val = vlv_dpio_read(dev_priv, pipe, VLV_PCS01_DW10(ch));
 	val &= ~(DPIO_PCS_SWING_CALC_TX0_TX2 | DPIO_PCS_SWING_CALC_TX1_TX3);
+	val &= ~(DPIO_PCS_TX1DEEMP_MASK | DPIO_PCS_TX2DEEMP_MASK);
+	val |= DPIO_PCS_TX1DEEMP_9P5 | DPIO_PCS_TX2DEEMP_9P5;
 	vlv_dpio_write(dev_priv, pipe, VLV_PCS01_DW10(ch), val);
 
 	val = vlv_dpio_read(dev_priv, pipe, VLV_PCS23_DW10(ch));
 	val &= ~(DPIO_PCS_SWING_CALC_TX0_TX2 | DPIO_PCS_SWING_CALC_TX1_TX3);
+	val &= ~(DPIO_PCS_TX1DEEMP_MASK | DPIO_PCS_TX2DEEMP_MASK);
+	val |= DPIO_PCS_TX1DEEMP_9P5 | DPIO_PCS_TX2DEEMP_9P5;
 	vlv_dpio_write(dev_priv, pipe, VLV_PCS23_DW10(ch), val);
 
+	val = vlv_dpio_read(dev_priv, pipe, VLV_PCS01_DW9(ch));
+	val &= ~(DPIO_PCS_TX1MARGIN_MASK | DPIO_PCS_TX2MARGIN_MASK);
+	val |= DPIO_PCS_TX1MARGIN_000 | DPIO_PCS_TX2MARGIN_000;
+	vlv_dpio_write(dev_priv, pipe, VLV_PCS01_DW9(ch), val);
+
+	val = vlv_dpio_read(dev_priv, pipe, VLV_PCS23_DW9(ch));
+	val &= ~(DPIO_PCS_TX1MARGIN_MASK | DPIO_PCS_TX2MARGIN_MASK);
+	val |= DPIO_PCS_TX1MARGIN_000 | DPIO_PCS_TX2MARGIN_000;
+	vlv_dpio_write(dev_priv, pipe, VLV_PCS23_DW9(ch), val);
+
 	/* Program swing deemph */
 	for (i = 0; i < 4; i++) {
 		val = vlv_dpio_read(dev_priv, pipe, CHV_TX_DW4(ch, i));
@@ -3334,7 +3425,7 @@ intel_dp_set_signal_levels(struct intel_dp *intel_dp, uint32_t *DP)
 	uint32_t signal_levels, mask;
 	uint8_t train_set = intel_dp->train_set[0];
 
-	if (IS_HASWELL(dev) || IS_BROADWELL(dev)) {
+	if (IS_HASWELL(dev) || IS_BROADWELL(dev) || INTEL_INFO(dev)->gen >= 9) {
 		signal_levels = intel_hsw_signal_levels(train_set);
 		mask = DDI_BUF_EMP_MASK;
 	} else if (IS_CHERRYVIEW(dev)) {
@@ -3801,26 +3892,48 @@ int intel_dp_sink_crc(struct intel_dp *intel_dp, u8 *crc)
 	struct drm_device *dev = intel_dig_port->base.base.dev;
 	struct intel_crtc *intel_crtc =
 		to_intel_crtc(intel_dig_port->base.base.crtc);
-	u8 buf[1];
+	u8 buf;
+	int test_crc_count;
+	int attempts = 6;
 
-	if (drm_dp_dpcd_readb(&intel_dp->aux, DP_TEST_SINK_MISC, buf) < 0)
+	if (drm_dp_dpcd_readb(&intel_dp->aux, DP_TEST_SINK_MISC, &buf) < 0)
 		return -EIO;
 
-	if (!(buf[0] & DP_TEST_CRC_SUPPORTED))
+	if (!(buf & DP_TEST_CRC_SUPPORTED))
 		return -ENOTTY;
 
+	if (drm_dp_dpcd_readb(&intel_dp->aux, DP_TEST_SINK, &buf) < 0)
+		return -EIO;
+
 	if (drm_dp_dpcd_writeb(&intel_dp->aux, DP_TEST_SINK,
-			       DP_TEST_SINK_START) < 0)
+				buf | DP_TEST_SINK_START) < 0)
+		return -EIO;
+
+	if (drm_dp_dpcd_readb(&intel_dp->aux, DP_TEST_SINK_MISC, &buf) < 0)
 		return -EIO;
+	test_crc_count = buf & DP_TEST_COUNT_MASK;
 
-	/* Wait 2 vblanks to be sure we will have the correct CRC value */
-	intel_wait_for_vblank(dev, intel_crtc->pipe);
-	intel_wait_for_vblank(dev, intel_crtc->pipe);
+	do {
+		if (drm_dp_dpcd_readb(&intel_dp->aux,
+				      DP_TEST_SINK_MISC, &buf) < 0)
+			return -EIO;
+		intel_wait_for_vblank(dev, intel_crtc->pipe);
+	} while (--attempts && (buf & DP_TEST_COUNT_MASK) == test_crc_count);
+
+	if (attempts == 0) {
+		DRM_ERROR("Panel is unable to calculate CRC after 6 vblanks\n");
+		return -EIO;
+	}
 
 	if (drm_dp_dpcd_read(&intel_dp->aux, DP_TEST_CRC_R_CR, crc, 6) < 0)
 		return -EIO;
 
-	drm_dp_dpcd_writeb(&intel_dp->aux, DP_TEST_SINK, 0);
+	if (drm_dp_dpcd_readb(&intel_dp->aux, DP_TEST_SINK, &buf) < 0)
+		return -EIO;
+	if (drm_dp_dpcd_writeb(&intel_dp->aux, DP_TEST_SINK,
+			       buf & ~DP_TEST_SINK_START) < 0)
+		return -EIO;
+
 	return 0;
 }
 
@@ -5057,7 +5170,9 @@ intel_dp_init_connector(struct intel_digital_port *intel_dig_port,
 	intel_dp->pps_pipe = INVALID_PIPE;
 
 	/* intel_dp vfuncs */
-	if (IS_VALLEYVIEW(dev))
+	if (INTEL_INFO(dev)->gen >= 9)
+		intel_dp->get_aux_clock_divider = skl_get_aux_clock_divider;
+	else if (IS_VALLEYVIEW(dev))
 		intel_dp->get_aux_clock_divider = vlv_get_aux_clock_divider;
 	else if (IS_HASWELL(dev) || IS_BROADWELL(dev))
 		intel_dp->get_aux_clock_divider = hsw_get_aux_clock_divider;
@@ -5066,7 +5181,10 @@ intel_dp_init_connector(struct intel_digital_port *intel_dig_port,
 	else
 		intel_dp->get_aux_clock_divider = i9xx_get_aux_clock_divider;
 
-	intel_dp->get_aux_send_ctl = i9xx_get_aux_send_ctl;
+	if (INTEL_INFO(dev)->gen >= 9)
+		intel_dp->get_aux_send_ctl = skl_get_aux_send_ctl;
+	else
+		intel_dp->get_aux_send_ctl = i9xx_get_aux_send_ctl;
 
 	/* Preserve the current hw state. */
 	intel_dp->DP = I915_READ(intel_dp->output_reg);

drivers/gpu/drm/i915/intel_drv.h

@@ -34,6 +34,7 @@
 #include <drm/drm_crtc_helper.h>
 #include <drm/drm_fb_helper.h>
 #include <drm/drm_dp_mst_helper.h>
+#include <drm/drm_rect.h>
 
 #define DIV_ROUND_CLOSEST_ULL(ll, d)	\
 ({ unsigned long long _tmp = (ll)+(d)/2; do_div(_tmp, d); _tmp; })
@@ -240,6 +241,17 @@ typedef struct dpll {
 	int	p;
 } intel_clock_t;
 
+struct intel_plane_state {
+	struct drm_crtc *crtc;
+	struct drm_framebuffer *fb;
+	struct drm_rect src;
+	struct drm_rect dst;
+	struct drm_rect clip;
+	struct drm_rect orig_src;
+	struct drm_rect orig_dst;
+	bool visible;
+};
+
 struct intel_plane_config {
 	bool tiled;
 	int size;
@@ -734,6 +746,14 @@ hdmi_to_dig_port(struct intel_hdmi *intel_hdmi)
 	return container_of(intel_hdmi, struct intel_digital_port, hdmi);
 }
 
+/*
+ * Returns the number of planes for this pipe, ie the number of sprites + 1
+ * (primary plane). This doesn't count the cursor plane then.
+ */
+static inline unsigned int intel_num_planes(struct intel_crtc *crtc)
+{
+	return INTEL_INFO(crtc->base.dev)->num_sprites[crtc->pipe] + 1;
+}
 
 /* i915_irq.c */
 bool intel_set_cpu_fifo_underrun_reporting(struct drm_device *dev,
@@ -747,15 +767,15 @@ void gen6_enable_pm_irq(struct drm_i915_private *dev_priv, uint32_t mask);
 void gen6_disable_pm_irq(struct drm_i915_private *dev_priv, uint32_t mask);
 void gen8_enable_pm_irq(struct drm_i915_private *dev_priv, uint32_t mask);
 void gen8_disable_pm_irq(struct drm_i915_private *dev_priv, uint32_t mask);
-void intel_runtime_pm_disable_interrupts(struct drm_device *dev);
-void intel_runtime_pm_restore_interrupts(struct drm_device *dev);
+void intel_runtime_pm_disable_interrupts(struct drm_i915_private *dev_priv);
+void intel_runtime_pm_enable_interrupts(struct drm_i915_private *dev_priv);
 static inline bool intel_irqs_enabled(struct drm_i915_private *dev_priv)
 {
 	/*
 	 * We only use drm_irq_uninstall() at unload and VT switch, so
 	 * this is the only thing we need to check.
 	 */
-	return !dev_priv->pm._irqs_disabled;
+	return dev_priv->pm.irqs_enabled;
 }
 
 int intel_get_crtc_scanline(struct intel_crtc *crtc);
@@ -792,11 +812,7 @@ void intel_ddi_clock_get(struct intel_encoder *encoder,
 			 struct intel_crtc_config *pipe_config);
 void intel_ddi_set_vc_payload_alloc(struct drm_crtc *crtc, bool state);
 
-/* intel_display.c */
-const char *intel_output_name(int output);
-bool intel_has_pending_fb_unpin(struct drm_device *dev);
-int intel_pch_rawclk(struct drm_device *dev);
-void intel_mark_busy(struct drm_device *dev);
+/* intel_frontbuffer.c */
 void intel_fb_obj_invalidate(struct drm_i915_gem_object *obj,
 			     struct intel_engine_cs *ring);
 void intel_frontbuffer_flip_prepare(struct drm_device *dev,
@@ -806,7 +822,7 @@ void intel_frontbuffer_flip_complete(struct drm_device *dev,
 void intel_frontbuffer_flush(struct drm_device *dev,
 			     unsigned frontbuffer_bits);
 /**
- * intel_frontbuffer_flip - prepare frontbuffer flip
+ * intel_frontbuffer_flip - synchronous frontbuffer flip
  * @dev: DRM device
  * @frontbuffer_bits: frontbuffer plane tracking bits
  *
@@ -824,6 +840,13 @@ void intel_frontbuffer_flip(struct drm_device *dev,
 }
 
 void intel_fb_obj_flush(struct drm_i915_gem_object *obj, bool retire);
+
+
+/* intel_display.c */
+const char *intel_output_name(int output);
+bool intel_has_pending_fb_unpin(struct drm_device *dev);
+int intel_pch_rawclk(struct drm_device *dev);
+void intel_mark_busy(struct drm_device *dev);
 void intel_mark_idle(struct drm_device *dev);
 void intel_crtc_restore_mode(struct drm_crtc *crtc);
 void intel_crtc_control(struct drm_crtc *crtc, bool enable);
@@ -844,7 +867,11 @@ int intel_get_pipe_from_crtc_id(struct drm_device *dev, void *data,
 				struct drm_file *file_priv);
 enum transcoder intel_pipe_to_cpu_transcoder(struct drm_i915_private *dev_priv,
 					     enum pipe pipe);
-void intel_wait_for_vblank(struct drm_device *dev, int pipe);
+static inline void
+intel_wait_for_vblank(struct drm_device *dev, int pipe)
+{
+	drm_wait_one_vblank(dev, pipe);
+}
 int ironlake_get_lanes_required(int target_clock, int link_bw, int bpp);
 void vlv_wait_port_ready(struct drm_i915_private *dev_priv,
 			 struct intel_digital_port *dport);
@@ -878,6 +905,8 @@ struct intel_shared_dpll *intel_get_shared_dpll(struct intel_crtc *crtc);
 void intel_put_shared_dpll(struct intel_crtc *crtc);
 
 /* modesetting asserts */
+void assert_panel_unlocked(struct drm_i915_private *dev_priv,
+			   enum pipe pipe);
 void assert_pll(struct drm_i915_private *dev_priv,
 		enum pipe pipe, bool state);
 #define assert_pll_enabled(d, p) assert_pll(d, p, true)
@@ -908,7 +937,6 @@ ironlake_check_encoder_dotclock(const struct intel_crtc_config *pipe_config,
 bool intel_crtc_active(struct drm_crtc *crtc);
 void hsw_enable_ips(struct intel_crtc *crtc);
 void hsw_disable_ips(struct intel_crtc *crtc);
-void intel_display_set_init_power(struct drm_i915_private *dev, bool enable);
 enum intel_display_power_domain
 intel_display_port_power_domain(struct intel_encoder *intel_encoder);
 void intel_mode_from_pipe_config(struct drm_display_mode *mode,
@@ -1055,6 +1083,28 @@ extern struct drm_display_mode *intel_find_panel_downclock(
 				struct drm_display_mode *fixed_mode,
 				struct drm_connector *connector);
 
+/* intel_runtime_pm.c */
+int intel_power_domains_init(struct drm_i915_private *);
+void intel_power_domains_fini(struct drm_i915_private *);
+void intel_power_domains_init_hw(struct drm_i915_private *dev_priv);
+void intel_runtime_pm_enable(struct drm_i915_private *dev_priv);
+
+bool intel_display_power_is_enabled(struct drm_i915_private *dev_priv,
+				    enum intel_display_power_domain domain);
+bool __intel_display_power_is_enabled(struct drm_i915_private *dev_priv,
+				      enum intel_display_power_domain domain);
+void intel_display_power_get(struct drm_i915_private *dev_priv,
+			     enum intel_display_power_domain domain);
+void intel_display_power_put(struct drm_i915_private *dev_priv,
+			     enum intel_display_power_domain domain);
+void intel_aux_display_runtime_get(struct drm_i915_private *dev_priv);
+void intel_aux_display_runtime_put(struct drm_i915_private *dev_priv);
+void intel_runtime_pm_get(struct drm_i915_private *dev_priv);
+void intel_runtime_pm_get_noresume(struct drm_i915_private *dev_priv);
+void intel_runtime_pm_put(struct drm_i915_private *dev_priv);
+
+void intel_display_set_init_power(struct drm_i915_private *dev, bool enable);
+
 /* intel_pm.c */
 void intel_init_clock_gating(struct drm_device *dev);
 void intel_suspend_hw(struct drm_device *dev);
@@ -1072,17 +1122,6 @@ bool intel_fbc_enabled(struct drm_device *dev);
 void intel_update_fbc(struct drm_device *dev);
 void intel_gpu_ips_init(struct drm_i915_private *dev_priv);
 void intel_gpu_ips_teardown(void);
-int intel_power_domains_init(struct drm_i915_private *);
-void intel_power_domains_remove(struct drm_i915_private *);
-bool intel_display_power_enabled(struct drm_i915_private *dev_priv,
-				 enum intel_display_power_domain domain);
-bool intel_display_power_enabled_unlocked(struct drm_i915_private *dev_priv,
-					  enum intel_display_power_domain domain);
-void intel_display_power_get(struct drm_i915_private *dev_priv,
-			     enum intel_display_power_domain domain);
-void intel_display_power_put(struct drm_i915_private *dev_priv,
-			     enum intel_display_power_domain domain);
-void intel_power_domains_init_hw(struct drm_i915_private *dev_priv);
 void intel_init_gt_powersave(struct drm_device *dev);
 void intel_cleanup_gt_powersave(struct drm_device *dev);
 void intel_enable_gt_powersave(struct drm_device *dev);
@@ -1093,13 +1132,6 @@ void ironlake_teardown_rc6(struct drm_device *dev);
 void gen6_update_ring_freq(struct drm_device *dev);
 void gen6_rps_idle(struct drm_i915_private *dev_priv);
 void gen6_rps_boost(struct drm_i915_private *dev_priv);
-void intel_aux_display_runtime_get(struct drm_i915_private *dev_priv);
-void intel_aux_display_runtime_put(struct drm_i915_private *dev_priv);
-void intel_runtime_pm_get(struct drm_i915_private *dev_priv);
-void intel_runtime_pm_get_noresume(struct drm_i915_private *dev_priv);
-void intel_runtime_pm_put(struct drm_i915_private *dev_priv);
-void intel_init_runtime_pm(struct drm_i915_private *dev_priv);
-void intel_fini_runtime_pm(struct drm_i915_private *dev_priv);
 void ilk_wm_get_hw_state(struct drm_device *dev);
 
 

drivers/gpu/drm/i915/intel_dsi.c

@@ -344,7 +344,7 @@ static bool intel_dsi_get_hw_state(struct intel_encoder *encoder,
 	DRM_DEBUG_KMS("\n");
 
 	power_domain = intel_display_port_power_domain(encoder);
-	if (!intel_display_power_enabled(dev_priv, power_domain))
+	if (!intel_display_power_is_enabled(dev_priv, power_domain))
 		return false;
 
 	/* XXX: this only works for one DSI output */

drivers/gpu/drm/i915/intel_frontbuffer.c

@@ -0,0 +1,279 @@
+/*
+ * Copyright © 2014 Intel Corporation
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+ * DEALINGS IN THE SOFTWARE.
+ *
+ * Authors:
+ *	Daniel Vetter <daniel.vetter@ffwll.ch>
+ */
+
+/**
+ * DOC: frontbuffer tracking
+ *
+ * Many features require us to track changes to the currently active
+ * frontbuffer, especially rendering targeted at the frontbuffer.
+ *
+ * To be able to do so GEM tracks frontbuffers using a bitmask for all possible
+ * frontbuffer slots through i915_gem_track_fb(). The function in this file are
+ * then called when the contents of the frontbuffer are invalidated, when
+ * frontbuffer rendering has stopped again to flush out all the changes and when
+ * the frontbuffer is exchanged with a flip. Subsystems interested in
+ * frontbuffer changes (e.g. PSR, FBC, DRRS) should directly put their callbacks
+ * into the relevant places and filter for the frontbuffer slots that they are
+ * interested int.
+ *
+ * On a high level there are two types of powersaving features. The first one
+ * work like a special cache (FBC and PSR) and are interested when they should
+ * stop caching and when to restart caching. This is done by placing callbacks
+ * into the invalidate and the flush functions: At invalidate the caching must
+ * be stopped and at flush time it can be restarted. And maybe they need to know
+ * when the frontbuffer changes (e.g. when the hw doesn't initiate an invalidate
+ * and flush on its own) which can be achieved with placing callbacks into the
+ * flip functions.
+ *
+ * The other type of display power saving feature only cares about busyness
+ * (e.g. DRRS). In that case all three (invalidate, flush and flip) indicate
+ * busyness. There is no direct way to detect idleness. Instead an idle timer
+ * work delayed work should be started from the flush and flip functions and
+ * cancelled as soon as busyness is detected.
+ *
+ * Note that there's also an older frontbuffer activity tracking scheme which
+ * just tracks general activity. This is done by the various mark_busy and
+ * mark_idle functions. For display power management features using these
+ * functions is deprecated and should be avoided.
+ */
+
+#include <drm/drmP.h>
+
+#include "intel_drv.h"
+#include "i915_drv.h"
+
+static void intel_increase_pllclock(struct drm_device *dev,
+				    enum pipe pipe)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	int dpll_reg = DPLL(pipe);
+	int dpll;
+
+	if (!HAS_GMCH_DISPLAY(dev))
+		return;
+
+	if (!dev_priv->lvds_downclock_avail)
+		return;
+
+	dpll = I915_READ(dpll_reg);
+	if (!HAS_PIPE_CXSR(dev) && (dpll & DISPLAY_RATE_SELECT_FPA1)) {
+		DRM_DEBUG_DRIVER("upclocking LVDS\n");
+
+		assert_panel_unlocked(dev_priv, pipe);
+
+		dpll &= ~DISPLAY_RATE_SELECT_FPA1;
+		I915_WRITE(dpll_reg, dpll);
+		intel_wait_for_vblank(dev, pipe);
+
+		dpll = I915_READ(dpll_reg);
+		if (dpll & DISPLAY_RATE_SELECT_FPA1)
+			DRM_DEBUG_DRIVER("failed to upclock LVDS!\n");
+	}
+}
+
+/**
+ * intel_mark_fb_busy - mark given planes as busy
+ * @dev: DRM device
+ * @frontbuffer_bits: bits for the affected planes
+ * @ring: optional ring for asynchronous commands
+ *
+ * This function gets called every time the screen contents change. It can be
+ * used to keep e.g. the update rate at the nominal refresh rate with DRRS.
+ */
+static void intel_mark_fb_busy(struct drm_device *dev,
+			       unsigned frontbuffer_bits,
+			       struct intel_engine_cs *ring)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	enum pipe pipe;
+
+	if (!i915.powersave)
+		return;
+
+	for_each_pipe(dev_priv, pipe) {
+		if (!(frontbuffer_bits & INTEL_FRONTBUFFER_ALL_MASK(pipe)))
+			continue;
+
+		intel_increase_pllclock(dev, pipe);
+		if (ring && intel_fbc_enabled(dev))
+			ring->fbc_dirty = true;
+	}
+}
+
+/**
+ * intel_fb_obj_invalidate - invalidate frontbuffer object
+ * @obj: GEM object to invalidate
+ * @ring: set for asynchronous rendering
+ *
+ * This function gets called every time rendering on the given object starts and
+ * frontbuffer caching (fbc, low refresh rate for DRRS, panel self refresh) must
+ * be invalidated. If @ring is non-NULL any subsequent invalidation will be delayed
+ * until the rendering completes or a flip on this frontbuffer plane is
+ * scheduled.
+ */
+void intel_fb_obj_invalidate(struct drm_i915_gem_object *obj,
+			     struct intel_engine_cs *ring)
+{
+	struct drm_device *dev = obj->base.dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+
+	WARN_ON(!mutex_is_locked(&dev->struct_mutex));
+
+	if (!obj->frontbuffer_bits)
+		return;
+
+	if (ring) {
+		mutex_lock(&dev_priv->fb_tracking.lock);
+		dev_priv->fb_tracking.busy_bits
+			|= obj->frontbuffer_bits;
+		dev_priv->fb_tracking.flip_bits
+			&= ~obj->frontbuffer_bits;
+		mutex_unlock(&dev_priv->fb_tracking.lock);
+	}
+
+	intel_mark_fb_busy(dev, obj->frontbuffer_bits, ring);
+
+	intel_edp_psr_invalidate(dev, obj->frontbuffer_bits);
+}
+
+/**
+ * intel_frontbuffer_flush - flush frontbuffer
+ * @dev: DRM device
+ * @frontbuffer_bits: frontbuffer plane tracking bits
+ *
+ * This function gets called every time rendering on the given planes has
+ * completed and frontbuffer caching can be started again. Flushes will get
+ * delayed if they're blocked by some outstanding asynchronous rendering.
+ *
+ * Can be called without any locks held.
+ */
+void intel_frontbuffer_flush(struct drm_device *dev,
+			     unsigned frontbuffer_bits)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+
+	/* Delay flushing when rings are still busy.*/
+	mutex_lock(&dev_priv->fb_tracking.lock);
+	frontbuffer_bits &= ~dev_priv->fb_tracking.busy_bits;
+	mutex_unlock(&dev_priv->fb_tracking.lock);
+
+	intel_mark_fb_busy(dev, frontbuffer_bits, NULL);
+
+	intel_edp_psr_flush(dev, frontbuffer_bits);
+
+	/*
+	 * FIXME: Unconditional fbc flushing here is a rather gross hack and
+	 * needs to be reworked into a proper frontbuffer tracking scheme like
+	 * psr employs.
+	 */
+	if (dev_priv->fbc.need_sw_cache_clean) {
+		dev_priv->fbc.need_sw_cache_clean = false;
+		bdw_fbc_sw_flush(dev, FBC_REND_CACHE_CLEAN);
+	}
+}
+
+/**
+ * intel_fb_obj_flush - flush frontbuffer object
+ * @obj: GEM object to flush
+ * @retire: set when retiring asynchronous rendering
+ *
+ * This function gets called every time rendering on the given object has
+ * completed and frontbuffer caching can be started again. If @retire is true
+ * then any delayed flushes will be unblocked.
+ */
+void intel_fb_obj_flush(struct drm_i915_gem_object *obj,
+			bool retire)
+{
+	struct drm_device *dev = obj->base.dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	unsigned frontbuffer_bits;
+
+	WARN_ON(!mutex_is_locked(&dev->struct_mutex));
+
+	if (!obj->frontbuffer_bits)
+		return;
+
+	frontbuffer_bits = obj->frontbuffer_bits;
+
+	if (retire) {
+		mutex_lock(&dev_priv->fb_tracking.lock);
+		/* Filter out new bits since rendering started. */
+		frontbuffer_bits &= dev_priv->fb_tracking.busy_bits;
+
+		dev_priv->fb_tracking.busy_bits &= ~frontbuffer_bits;
+		mutex_unlock(&dev_priv->fb_tracking.lock);
+	}
+
+	intel_frontbuffer_flush(dev, frontbuffer_bits);
+}
+
+/**
+ * intel_frontbuffer_flip_prepare - prepare asynchronous frontbuffer flip
+ * @dev: DRM device
+ * @frontbuffer_bits: frontbuffer plane tracking bits
+ *
+ * This function gets called after scheduling a flip on @obj. The actual
+ * frontbuffer flushing will be delayed until completion is signalled with
+ * intel_frontbuffer_flip_complete. If an invalidate happens in between this
+ * flush will be cancelled.
+ *
+ * Can be called without any locks held.
+ */
+void intel_frontbuffer_flip_prepare(struct drm_device *dev,
+				    unsigned frontbuffer_bits)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+
+	mutex_lock(&dev_priv->fb_tracking.lock);
+	dev_priv->fb_tracking.flip_bits |= frontbuffer_bits;
+	/* Remove stale busy bits due to the old buffer. */
+	dev_priv->fb_tracking.busy_bits &= ~frontbuffer_bits;
+	mutex_unlock(&dev_priv->fb_tracking.lock);
+}
+
+/**
+ * intel_frontbuffer_flip_complete - complete asynchronous frontbuffer flip
+ * @dev: DRM device
+ * @frontbuffer_bits: frontbuffer plane tracking bits
+ *
+ * This function gets called after the flip has been latched and will complete
+ * on the next vblank. It will execute the flush if it hasn't been cancelled yet.
+ *
+ * Can be called without any locks held.
+ */
+void intel_frontbuffer_flip_complete(struct drm_device *dev,
+				     unsigned frontbuffer_bits)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+
+	mutex_lock(&dev_priv->fb_tracking.lock);
+	/* Mask any cancelled flips. */
+	frontbuffer_bits &= dev_priv->fb_tracking.flip_bits;
+	dev_priv->fb_tracking.flip_bits &= ~frontbuffer_bits;
+	mutex_unlock(&dev_priv->fb_tracking.lock);
+
+	intel_frontbuffer_flush(dev, frontbuffer_bits);
+}

drivers/gpu/drm/i915/intel_hdmi.c

@@ -690,7 +690,7 @@ static bool intel_hdmi_get_hw_state(struct intel_encoder *encoder,
 	u32 tmp;
 
 	power_domain = intel_display_port_power_domain(encoder);
-	if (!intel_display_power_enabled(dev_priv, power_domain))
+	if (!intel_display_power_is_enabled(dev_priv, power_domain))
 		return false;
 
 	tmp = I915_READ(intel_hdmi->hdmi_reg);
@@ -1405,6 +1405,15 @@ static void chv_hdmi_pre_enable(struct intel_encoder *encoder)
 
 	mutex_lock(&dev_priv->dpio_lock);
 
+	/* allow hardware to manage TX FIFO reset source */
+	val = vlv_dpio_read(dev_priv, pipe, VLV_PCS01_DW11(ch));
+	val &= ~DPIO_LANEDESKEW_STRAP_OVRD;
+	vlv_dpio_write(dev_priv, pipe, VLV_PCS01_DW11(ch), val);
+
+	val = vlv_dpio_read(dev_priv, pipe, VLV_PCS23_DW11(ch));
+	val &= ~DPIO_LANEDESKEW_STRAP_OVRD;
+	vlv_dpio_write(dev_priv, pipe, VLV_PCS23_DW11(ch), val);
+
 	/* Deassert soft data lane reset*/
 	val = vlv_dpio_read(dev_priv, pipe, VLV_PCS01_DW1(ch));
 	val |= CHV_PCS_REQ_SOFTRESET_EN;
@@ -1441,12 +1450,26 @@ static void chv_hdmi_pre_enable(struct intel_encoder *encoder)
 	/* Clear calc init */
 	val = vlv_dpio_read(dev_priv, pipe, VLV_PCS01_DW10(ch));
 	val &= ~(DPIO_PCS_SWING_CALC_TX0_TX2 | DPIO_PCS_SWING_CALC_TX1_TX3);
+	val &= ~(DPIO_PCS_TX1DEEMP_MASK | DPIO_PCS_TX2DEEMP_MASK);
+	val |= DPIO_PCS_TX1DEEMP_9P5 | DPIO_PCS_TX2DEEMP_9P5;
 	vlv_dpio_write(dev_priv, pipe, VLV_PCS01_DW10(ch), val);
 
 	val = vlv_dpio_read(dev_priv, pipe, VLV_PCS23_DW10(ch));
 	val &= ~(DPIO_PCS_SWING_CALC_TX0_TX2 | DPIO_PCS_SWING_CALC_TX1_TX3);
+	val &= ~(DPIO_PCS_TX1DEEMP_MASK | DPIO_PCS_TX2DEEMP_MASK);
+	val |= DPIO_PCS_TX1DEEMP_9P5 | DPIO_PCS_TX2DEEMP_9P5;
 	vlv_dpio_write(dev_priv, pipe, VLV_PCS23_DW10(ch), val);
 
+	val = vlv_dpio_read(dev_priv, pipe, VLV_PCS01_DW9(ch));
+	val &= ~(DPIO_PCS_TX1MARGIN_MASK | DPIO_PCS_TX2MARGIN_MASK);
+	val |= DPIO_PCS_TX1MARGIN_000 | DPIO_PCS_TX2MARGIN_000;
+	vlv_dpio_write(dev_priv, pipe, VLV_PCS01_DW9(ch), val);
+
+	val = vlv_dpio_read(dev_priv, pipe, VLV_PCS23_DW9(ch));
+	val &= ~(DPIO_PCS_TX1MARGIN_MASK | DPIO_PCS_TX2MARGIN_MASK);
+	val |= DPIO_PCS_TX1MARGIN_000 | DPIO_PCS_TX2MARGIN_000;
+	vlv_dpio_write(dev_priv, pipe, VLV_PCS23_DW9(ch), val);
+
 	/* FIXME: Program the support xxx V-dB */
 	/* Use 800mV-0dB */
 	for (i = 0; i < 4; i++) {

drivers/gpu/drm/i915/intel_lrc.c

@@ -1063,7 +1063,7 @@ static bool gen8_logical_ring_get_irq(struct intel_engine_cs *ring)
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	unsigned long flags;
 
-	if (!dev->irq_enabled)
+	if (WARN_ON(!intel_irqs_enabled(dev_priv)))
 		return false;
 
 	spin_lock_irqsave(&dev_priv->irq_lock, flags);

drivers/gpu/drm/i915/intel_lvds.c

@@ -76,7 +76,7 @@ static bool intel_lvds_get_hw_state(struct intel_encoder *encoder,
 	u32 tmp;
 
 	power_domain = intel_display_port_power_domain(encoder);
-	if (!intel_display_power_enabled(dev_priv, power_domain))
+	if (!intel_display_power_is_enabled(dev_priv, power_domain))
 		return false;
 
 	tmp = I915_READ(lvds_encoder->reg);

drivers/gpu/drm/i915/intel_panel.c

@@ -537,14 +537,13 @@ static u32 intel_panel_get_backlight(struct intel_connector *connector)
 	struct drm_device *dev = connector->base.dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	u32 val;
-	unsigned long flags;
 
-	spin_lock_irqsave(&dev_priv->backlight_lock, flags);
+	mutex_lock(&dev_priv->backlight_lock);
 
 	val = dev_priv->display.get_backlight(connector);
 	val = intel_panel_compute_brightness(connector, val);
 
-	spin_unlock_irqrestore(&dev_priv->backlight_lock, flags);
+	mutex_unlock(&dev_priv->backlight_lock);
 
 	DRM_DEBUG_DRIVER("get backlight PWM = %d\n", val);
 	return val;
@@ -628,12 +627,11 @@ static void intel_panel_set_backlight(struct intel_connector *connector,
 	struct intel_panel *panel = &connector->panel;
 	enum pipe pipe = intel_get_pipe_from_connector(connector);
 	u32 hw_level;
-	unsigned long flags;
 
 	if (!panel->backlight.present || pipe == INVALID_PIPE)
 		return;
 
-	spin_lock_irqsave(&dev_priv->backlight_lock, flags);
+	mutex_lock(&dev_priv->backlight_lock);
 
 	WARN_ON(panel->backlight.max == 0);
 
@@ -643,7 +641,7 @@ static void intel_panel_set_backlight(struct intel_connector *connector,
 	if (panel->backlight.enabled)
 		intel_panel_actually_set_backlight(connector, hw_level);
 
-	spin_unlock_irqrestore(&dev_priv->backlight_lock, flags);
+	mutex_unlock(&dev_priv->backlight_lock);
 }
 
 /* set backlight brightness to level in range [0..max], assuming hw min is
@@ -657,12 +655,11 @@ void intel_panel_set_backlight_acpi(struct intel_connector *connector,
 	struct intel_panel *panel = &connector->panel;
 	enum pipe pipe = intel_get_pipe_from_connector(connector);
 	u32 hw_level;
-	unsigned long flags;
 
 	if (!panel->backlight.present || pipe == INVALID_PIPE)
 		return;
 
-	spin_lock_irqsave(&dev_priv->backlight_lock, flags);
+	mutex_lock(&dev_priv->backlight_lock);
 
 	WARN_ON(panel->backlight.max == 0);
 
@@ -678,7 +675,7 @@ void intel_panel_set_backlight_acpi(struct intel_connector *connector,
 	if (panel->backlight.enabled)
 		intel_panel_actually_set_backlight(connector, hw_level);
 
-	spin_unlock_irqrestore(&dev_priv->backlight_lock, flags);
+	mutex_unlock(&dev_priv->backlight_lock);
 }
 
 static void pch_disable_backlight(struct intel_connector *connector)
@@ -732,7 +729,6 @@ void intel_panel_disable_backlight(struct intel_connector *connector)
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	struct intel_panel *panel = &connector->panel;
 	enum pipe pipe = intel_get_pipe_from_connector(connector);
-	unsigned long flags;
 
 	if (!panel->backlight.present || pipe == INVALID_PIPE)
 		return;
@@ -748,14 +744,14 @@ void intel_panel_disable_backlight(struct intel_connector *connector)
 		return;
 	}
 
-	spin_lock_irqsave(&dev_priv->backlight_lock, flags);
+	mutex_lock(&dev_priv->backlight_lock);
 
 	if (panel->backlight.device)
 		panel->backlight.device->props.power = FB_BLANK_POWERDOWN;
 	panel->backlight.enabled = false;
 	dev_priv->display.disable_backlight(connector);
 
-	spin_unlock_irqrestore(&dev_priv->backlight_lock, flags);
+	mutex_unlock(&dev_priv->backlight_lock);
 }
 
 static void bdw_enable_backlight(struct intel_connector *connector)
@@ -936,14 +932,13 @@ void intel_panel_enable_backlight(struct intel_connector *connector)
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	struct intel_panel *panel = &connector->panel;
 	enum pipe pipe = intel_get_pipe_from_connector(connector);
-	unsigned long flags;
 
 	if (!panel->backlight.present || pipe == INVALID_PIPE)
 		return;
 
 	DRM_DEBUG_KMS("pipe %c\n", pipe_name(pipe));
 
-	spin_lock_irqsave(&dev_priv->backlight_lock, flags);
+	mutex_lock(&dev_priv->backlight_lock);
 
 	WARN_ON(panel->backlight.max == 0);
 
@@ -961,7 +956,7 @@ void intel_panel_enable_backlight(struct intel_connector *connector)
 	if (panel->backlight.device)
 		panel->backlight.device->props.power = FB_BLANK_UNBLANK;
 
-	spin_unlock_irqrestore(&dev_priv->backlight_lock, flags);
+	mutex_unlock(&dev_priv->backlight_lock);
 }
 
 #if IS_ENABLED(CONFIG_BACKLIGHT_CLASS_DEVICE)
@@ -1266,7 +1261,6 @@ int intel_panel_setup_backlight(struct drm_connector *connector)
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	struct intel_connector *intel_connector = to_intel_connector(connector);
 	struct intel_panel *panel = &intel_connector->panel;
-	unsigned long flags;
 	int ret;
 
 	if (!dev_priv->vbt.backlight.present) {
@@ -1279,9 +1273,9 @@ int intel_panel_setup_backlight(struct drm_connector *connector)
 	}
 
 	/* set level and max in panel struct */
-	spin_lock_irqsave(&dev_priv->backlight_lock, flags);
+	mutex_lock(&dev_priv->backlight_lock);
 	ret = dev_priv->display.setup_backlight(intel_connector);
-	spin_unlock_irqrestore(&dev_priv->backlight_lock, flags);
+	mutex_unlock(&dev_priv->backlight_lock);
 
 	if (ret) {
 		DRM_DEBUG_KMS("failed to setup backlight for connector %s\n",
@@ -1316,7 +1310,7 @@ void intel_panel_init_backlight_funcs(struct drm_device *dev)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
 
-	if (IS_BROADWELL(dev)) {
+	if (IS_BROADWELL(dev) || (INTEL_INFO(dev)->gen >= 9)) {
 		dev_priv->display.setup_backlight = bdw_setup_backlight;
 		dev_priv->display.enable_backlight = bdw_enable_backlight;
 		dev_priv->display.disable_backlight = pch_disable_backlight;

drivers/gpu/drm/i915/intel_pm.c

@@ -30,9 +30,6 @@
 #include "intel_drv.h"
 #include "../../../platform/x86/intel_ips.h"
 #include <linux/module.h>
-#include <linux/vgaarb.h>
-#include <drm/i915_powerwell.h>
-#include <linux/pm_runtime.h>
 
 /**
  * RC6 is a special power stage which allows the GPU to enter an very
@@ -66,11 +63,37 @@
  * i915.i915_enable_fbc parameter
  */
 
+static void gen9_init_clock_gating(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+
+	/*
+	 * WaDisableSDEUnitClockGating:skl
+	 * This seems to be a pre-production w/a.
+	 */
+	I915_WRITE(GEN8_UCGCTL6, I915_READ(GEN8_UCGCTL6) |
+		   GEN8_SDEUNIT_CLOCK_GATE_DISABLE);
+
+	/*
+	 * WaDisableDgMirrorFixInHalfSliceChicken5:skl
+	 * This is a pre-production w/a.
+	 */
+	I915_WRITE(GEN9_HALF_SLICE_CHICKEN5,
+		   I915_READ(GEN9_HALF_SLICE_CHICKEN5) &
+		   ~GEN9_DG_MIRROR_FIX_ENABLE);
+
+	/* Wa4x4STCOptimizationDisable:skl */
+	I915_WRITE(CACHE_MODE_1,
+		   _MASKED_BIT_ENABLE(GEN8_4x4_STC_OPTIMIZATION_DISABLE));
+}
+
 static void i8xx_disable_fbc(struct drm_device *dev)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	u32 fbc_ctl;
 
+	dev_priv->fbc.enabled = false;
+
 	/* Disable compression */
 	fbc_ctl = I915_READ(FBC_CONTROL);
 	if ((fbc_ctl & FBC_CTL_EN) == 0)
@@ -99,6 +122,8 @@ static void i8xx_enable_fbc(struct drm_crtc *crtc)
 	int i;
 	u32 fbc_ctl;
 
+	dev_priv->fbc.enabled = true;
+
 	cfb_pitch = dev_priv->fbc.size / FBC_LL_SIZE;
 	if (fb->pitches[0] < cfb_pitch)
 		cfb_pitch = fb->pitches[0];
@@ -153,6 +178,8 @@ static void g4x_enable_fbc(struct drm_crtc *crtc)
 	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
 	u32 dpfc_ctl;
 
+	dev_priv->fbc.enabled = true;
+
 	dpfc_ctl = DPFC_CTL_PLANE(intel_crtc->plane) | DPFC_SR_EN;
 	if (drm_format_plane_cpp(fb->pixel_format, 0) == 2)
 		dpfc_ctl |= DPFC_CTL_LIMIT_2X;
@@ -173,6 +200,8 @@ static void g4x_disable_fbc(struct drm_device *dev)
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	u32 dpfc_ctl;
 
+	dev_priv->fbc.enabled = false;
+
 	/* Disable compression */
 	dpfc_ctl = I915_READ(DPFC_CONTROL);
 	if (dpfc_ctl & DPFC_CTL_EN) {
@@ -224,6 +253,8 @@ static void ironlake_enable_fbc(struct drm_crtc *crtc)
 	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
 	u32 dpfc_ctl;
 
+	dev_priv->fbc.enabled = true;
+
 	dpfc_ctl = DPFC_CTL_PLANE(intel_crtc->plane);
 	if (drm_format_plane_cpp(fb->pixel_format, 0) == 2)
 		dev_priv->fbc.threshold++;
@@ -264,6 +295,8 @@ static void ironlake_disable_fbc(struct drm_device *dev)
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	u32 dpfc_ctl;
 
+	dev_priv->fbc.enabled = false;
+
 	/* Disable compression */
 	dpfc_ctl = I915_READ(ILK_DPFC_CONTROL);
 	if (dpfc_ctl & DPFC_CTL_EN) {
@@ -290,6 +323,8 @@ static void gen7_enable_fbc(struct drm_crtc *crtc)
 	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
 	u32 dpfc_ctl;
 
+	dev_priv->fbc.enabled = true;
+
 	dpfc_ctl = IVB_DPFC_CTL_PLANE(intel_crtc->plane);
 	if (drm_format_plane_cpp(fb->pixel_format, 0) == 2)
 		dev_priv->fbc.threshold++;
@@ -339,19 +374,19 @@ bool intel_fbc_enabled(struct drm_device *dev)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
 
-	if (!dev_priv->display.fbc_enabled)
-		return false;
-
-	return dev_priv->display.fbc_enabled(dev);
+	return dev_priv->fbc.enabled;
 }
 
-void gen8_fbc_sw_flush(struct drm_device *dev, u32 value)
+void bdw_fbc_sw_flush(struct drm_device *dev, u32 value)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
 
 	if (!IS_GEN8(dev))
 		return;
 
+	if (!intel_fbc_enabled(dev))
+		return;
+
 	I915_WRITE(MSG_FBC_REND_STATE, value);
 }
 
@@ -6041,1161 +6076,35 @@ void intel_suspend_hw(struct drm_device *dev)
 		lpt_suspend_hw(dev);
 }
 
-#define for_each_power_well(i, power_well, domain_mask, power_domains)	\
-	for (i = 0;							\
-	     i < (power_domains)->power_well_count &&			\
-		 ((power_well) = &(power_domains)->power_wells[i]);	\
-	     i++)							\
-		if ((power_well)->domains & (domain_mask))
-
-#define for_each_power_well_rev(i, power_well, domain_mask, power_domains) \
-	for (i = (power_domains)->power_well_count - 1;			 \
-	     i >= 0 && ((power_well) = &(power_domains)->power_wells[i]);\
-	     i--)							 \
-		if ((power_well)->domains & (domain_mask))
-
-/**
- * We should only use the power well if we explicitly asked the hardware to
- * enable it, so check if it's enabled and also check if we've requested it to
- * be enabled.
- */
-static bool hsw_power_well_enabled(struct drm_i915_private *dev_priv,
-				   struct i915_power_well *power_well)
-{
-	return I915_READ(HSW_PWR_WELL_DRIVER) ==
-		     (HSW_PWR_WELL_ENABLE_REQUEST | HSW_PWR_WELL_STATE_ENABLED);
-}
-
-bool intel_display_power_enabled_unlocked(struct drm_i915_private *dev_priv,
-					  enum intel_display_power_domain domain)
-{
-	struct i915_power_domains *power_domains;
-	struct i915_power_well *power_well;
-	bool is_enabled;
-	int i;
-
-	if (dev_priv->pm.suspended)
-		return false;
-
-	power_domains = &dev_priv->power_domains;
-
-	is_enabled = true;
-
-	for_each_power_well_rev(i, power_well, BIT(domain), power_domains) {
-		if (power_well->always_on)
-			continue;
-
-		if (!power_well->hw_enabled) {
-			is_enabled = false;
-			break;
-		}
-	}
-
-	return is_enabled;
-}
-
-bool intel_display_power_enabled(struct drm_i915_private *dev_priv,
-				 enum intel_display_power_domain domain)
-{
-	struct i915_power_domains *power_domains;
-	bool ret;
-
-	power_domains = &dev_priv->power_domains;
-
-	mutex_lock(&power_domains->lock);
-	ret = intel_display_power_enabled_unlocked(dev_priv, domain);
-	mutex_unlock(&power_domains->lock);
-
-	return ret;
-}
-
-/*
- * Starting with Haswell, we have a "Power Down Well" that can be turned off
- * when not needed anymore. We have 4 registers that can request the power well
- * to be enabled, and it will only be disabled if none of the registers is
- * requesting it to be enabled.
- */
-static void hsw_power_well_post_enable(struct drm_i915_private *dev_priv)
-{
-	struct drm_device *dev = dev_priv->dev;
-
-	/*
-	 * After we re-enable the power well, if we touch VGA register 0x3d5
-	 * we'll get unclaimed register interrupts. This stops after we write
-	 * anything to the VGA MSR register. The vgacon module uses this
-	 * register all the time, so if we unbind our driver and, as a
-	 * consequence, bind vgacon, we'll get stuck in an infinite loop at
-	 * console_unlock(). So make here we touch the VGA MSR register, making
-	 * sure vgacon can keep working normally without triggering interrupts
-	 * and error messages.
-	 */
-	vga_get_uninterruptible(dev->pdev, VGA_RSRC_LEGACY_IO);
-	outb(inb(VGA_MSR_READ), VGA_MSR_WRITE);
-	vga_put(dev->pdev, VGA_RSRC_LEGACY_IO);
-
-	if (IS_BROADWELL(dev))
-		gen8_irq_power_well_post_enable(dev_priv);
-}
-
-static void hsw_set_power_well(struct drm_i915_private *dev_priv,
-			       struct i915_power_well *power_well, bool enable)
+static void intel_init_fbc(struct drm_i915_private *dev_priv)
 {
-	bool is_enabled, enable_requested;
-	uint32_t tmp;
-
-	tmp = I915_READ(HSW_PWR_WELL_DRIVER);
-	is_enabled = tmp & HSW_PWR_WELL_STATE_ENABLED;
-	enable_requested = tmp & HSW_PWR_WELL_ENABLE_REQUEST;
-
-	if (enable) {
-		if (!enable_requested)
-			I915_WRITE(HSW_PWR_WELL_DRIVER,
-				   HSW_PWR_WELL_ENABLE_REQUEST);
-
-		if (!is_enabled) {
-			DRM_DEBUG_KMS("Enabling power well\n");
-			if (wait_for((I915_READ(HSW_PWR_WELL_DRIVER) &
-				      HSW_PWR_WELL_STATE_ENABLED), 20))
-				DRM_ERROR("Timeout enabling power well\n");
-		}
-
-		hsw_power_well_post_enable(dev_priv);
-	} else {
-		if (enable_requested) {
-			I915_WRITE(HSW_PWR_WELL_DRIVER, 0);
-			POSTING_READ(HSW_PWR_WELL_DRIVER);
-			DRM_DEBUG_KMS("Requesting to disable the power well\n");
-		}
-	}
-}
-
-static void hsw_power_well_sync_hw(struct drm_i915_private *dev_priv,
-				   struct i915_power_well *power_well)
-{
-	hsw_set_power_well(dev_priv, power_well, power_well->count > 0);
-
-	/*
-	 * We're taking over the BIOS, so clear any requests made by it since
-	 * the driver is in charge now.
-	 */
-	if (I915_READ(HSW_PWR_WELL_BIOS) & HSW_PWR_WELL_ENABLE_REQUEST)
-		I915_WRITE(HSW_PWR_WELL_BIOS, 0);
-}
-
-static void hsw_power_well_enable(struct drm_i915_private *dev_priv,
-				  struct i915_power_well *power_well)
-{
-	hsw_set_power_well(dev_priv, power_well, true);
-}
-
-static void hsw_power_well_disable(struct drm_i915_private *dev_priv,
-				   struct i915_power_well *power_well)
-{
-	hsw_set_power_well(dev_priv, power_well, false);
-}
-
-static void i9xx_always_on_power_well_noop(struct drm_i915_private *dev_priv,
-					   struct i915_power_well *power_well)
-{
-}
-
-static bool i9xx_always_on_power_well_enabled(struct drm_i915_private *dev_priv,
-					     struct i915_power_well *power_well)
-{
-	return true;
-}
-
-static void vlv_set_power_well(struct drm_i915_private *dev_priv,
-			       struct i915_power_well *power_well, bool enable)
-{
-	enum punit_power_well power_well_id = power_well->data;
-	u32 mask;
-	u32 state;
-	u32 ctrl;
-
-	mask = PUNIT_PWRGT_MASK(power_well_id);
-	state = enable ? PUNIT_PWRGT_PWR_ON(power_well_id) :
-			 PUNIT_PWRGT_PWR_GATE(power_well_id);
-
-	mutex_lock(&dev_priv->rps.hw_lock);
-
-#define COND \
-	((vlv_punit_read(dev_priv, PUNIT_REG_PWRGT_STATUS) & mask) == state)
-
-	if (COND)
-		goto out;
-
-	ctrl = vlv_punit_read(dev_priv, PUNIT_REG_PWRGT_CTRL);
-	ctrl &= ~mask;
-	ctrl |= state;
-	vlv_punit_write(dev_priv, PUNIT_REG_PWRGT_CTRL, ctrl);
-
-	if (wait_for(COND, 100))
-		DRM_ERROR("timout setting power well state %08x (%08x)\n",
-			  state,
-			  vlv_punit_read(dev_priv, PUNIT_REG_PWRGT_CTRL));
-
-#undef COND
-
-out:
-	mutex_unlock(&dev_priv->rps.hw_lock);
-}
-
-static void vlv_power_well_sync_hw(struct drm_i915_private *dev_priv,
-				   struct i915_power_well *power_well)
-{
-	vlv_set_power_well(dev_priv, power_well, power_well->count > 0);
-}
-
-static void vlv_power_well_enable(struct drm_i915_private *dev_priv,
-				  struct i915_power_well *power_well)
-{
-	vlv_set_power_well(dev_priv, power_well, true);
-}
-
-static void vlv_power_well_disable(struct drm_i915_private *dev_priv,
-				   struct i915_power_well *power_well)
-{
-	vlv_set_power_well(dev_priv, power_well, false);
-}
-
-static bool vlv_power_well_enabled(struct drm_i915_private *dev_priv,
-				   struct i915_power_well *power_well)
-{
-	int power_well_id = power_well->data;
-	bool enabled = false;
-	u32 mask;
-	u32 state;
-	u32 ctrl;
-
-	mask = PUNIT_PWRGT_MASK(power_well_id);
-	ctrl = PUNIT_PWRGT_PWR_ON(power_well_id);
-
-	mutex_lock(&dev_priv->rps.hw_lock);
-
-	state = vlv_punit_read(dev_priv, PUNIT_REG_PWRGT_STATUS) & mask;
-	/*
-	 * We only ever set the power-on and power-gate states, anything
-	 * else is unexpected.
-	 */
-	WARN_ON(state != PUNIT_PWRGT_PWR_ON(power_well_id) &&
-		state != PUNIT_PWRGT_PWR_GATE(power_well_id));
-	if (state == ctrl)
-		enabled = true;
-
-	/*
-	 * A transient state at this point would mean some unexpected party
-	 * is poking at the power controls too.
-	 */
-	ctrl = vlv_punit_read(dev_priv, PUNIT_REG_PWRGT_CTRL) & mask;
-	WARN_ON(ctrl != state);
-
-	mutex_unlock(&dev_priv->rps.hw_lock);
-
-	return enabled;
-}
-
-static void vlv_display_power_well_enable(struct drm_i915_private *dev_priv,
-					  struct i915_power_well *power_well)
-{
-	WARN_ON_ONCE(power_well->data != PUNIT_POWER_WELL_DISP2D);
-
-	vlv_set_power_well(dev_priv, power_well, true);
-
-	spin_lock_irq(&dev_priv->irq_lock);
-	valleyview_enable_display_irqs(dev_priv);
-	spin_unlock_irq(&dev_priv->irq_lock);
-
-	/*
-	 * During driver initialization/resume we can avoid restoring the
-	 * part of the HW/SW state that will be inited anyway explicitly.
-	 */
-	if (dev_priv->power_domains.initializing)
+	if (!HAS_FBC(dev_priv)) {
+		dev_priv->fbc.enabled = false;
 		return;
-
-	intel_hpd_init(dev_priv->dev);
-
-	i915_redisable_vga_power_on(dev_priv->dev);
-}
-
-static void vlv_display_power_well_disable(struct drm_i915_private *dev_priv,
-					   struct i915_power_well *power_well)
-{
-	WARN_ON_ONCE(power_well->data != PUNIT_POWER_WELL_DISP2D);
-
-	spin_lock_irq(&dev_priv->irq_lock);
-	valleyview_disable_display_irqs(dev_priv);
-	spin_unlock_irq(&dev_priv->irq_lock);
-
-	vlv_set_power_well(dev_priv, power_well, false);
-
-	vlv_power_sequencer_reset(dev_priv);
-}
-
-static void vlv_dpio_cmn_power_well_enable(struct drm_i915_private *dev_priv,
-					   struct i915_power_well *power_well)
-{
-	WARN_ON_ONCE(power_well->data != PUNIT_POWER_WELL_DPIO_CMN_BC);
-
-	/*
-	 * Enable the CRI clock source so we can get at the
-	 * display and the reference clock for VGA
-	 * hotplug / manual detection.
-	 */
-	I915_WRITE(DPLL(PIPE_B), I915_READ(DPLL(PIPE_B)) |
-		   DPLL_REFA_CLK_ENABLE_VLV | DPLL_INTEGRATED_CRI_CLK_VLV);
-	udelay(1); /* >10ns for cmnreset, >0ns for sidereset */
-
-	vlv_set_power_well(dev_priv, power_well, true);
-
-	/*
-	 * From VLV2A0_DP_eDP_DPIO_driver_vbios_notes_10.docx -
-	 *  6.	De-assert cmn_reset/side_reset. Same as VLV X0.
-	 *   a.	GUnit 0x2110 bit[0] set to 1 (def 0)
-	 *   b.	The other bits such as sfr settings / modesel may all
-	 *	be set to 0.
-	 *
-	 * This should only be done on init and resume from S3 with
-	 * both PLLs disabled, or we risk losing DPIO and PLL
-	 * synchronization.
-	 */
-	I915_WRITE(DPIO_CTL, I915_READ(DPIO_CTL) | DPIO_CMNRST);
-}
-
-static void vlv_dpio_cmn_power_well_disable(struct drm_i915_private *dev_priv,
-					    struct i915_power_well *power_well)
-{
-	enum pipe pipe;
-
-	WARN_ON_ONCE(power_well->data != PUNIT_POWER_WELL_DPIO_CMN_BC);
-
-	for_each_pipe(dev_priv, pipe)
-		assert_pll_disabled(dev_priv, pipe);
-
-	/* Assert common reset */
-	I915_WRITE(DPIO_CTL, I915_READ(DPIO_CTL) & ~DPIO_CMNRST);
-
-	vlv_set_power_well(dev_priv, power_well, false);
-}
-
-static void chv_dpio_cmn_power_well_enable(struct drm_i915_private *dev_priv,
-					   struct i915_power_well *power_well)
-{
-	enum dpio_phy phy;
-
-	WARN_ON_ONCE(power_well->data != PUNIT_POWER_WELL_DPIO_CMN_BC &&
-		     power_well->data != PUNIT_POWER_WELL_DPIO_CMN_D);
-
-	/*
-	 * Enable the CRI clock source so we can get at the
-	 * display and the reference clock for VGA
-	 * hotplug / manual detection.
-	 */
-	if (power_well->data == PUNIT_POWER_WELL_DPIO_CMN_BC) {
-		phy = DPIO_PHY0;
-		I915_WRITE(DPLL(PIPE_B), I915_READ(DPLL(PIPE_B)) |
-			   DPLL_REFA_CLK_ENABLE_VLV);
-		I915_WRITE(DPLL(PIPE_B), I915_READ(DPLL(PIPE_B)) |
-			   DPLL_REFA_CLK_ENABLE_VLV | DPLL_INTEGRATED_CRI_CLK_VLV);
-	} else {
-		phy = DPIO_PHY1;
-		I915_WRITE(DPLL(PIPE_C), I915_READ(DPLL(PIPE_C)) |
-			   DPLL_REFA_CLK_ENABLE_VLV | DPLL_INTEGRATED_CRI_CLK_VLV);
 	}
-	udelay(1); /* >10ns for cmnreset, >0ns for sidereset */
-	vlv_set_power_well(dev_priv, power_well, true);
-
-	/* Poll for phypwrgood signal */
-	if (wait_for(I915_READ(DISPLAY_PHY_STATUS) & PHY_POWERGOOD(phy), 1))
-		DRM_ERROR("Display PHY %d is not power up\n", phy);
-
-	I915_WRITE(DISPLAY_PHY_CONTROL, I915_READ(DISPLAY_PHY_CONTROL) |
-		   PHY_COM_LANE_RESET_DEASSERT(phy));
-}
-
-static void chv_dpio_cmn_power_well_disable(struct drm_i915_private *dev_priv,
-					    struct i915_power_well *power_well)
-{
-	enum dpio_phy phy;
-
-	WARN_ON_ONCE(power_well->data != PUNIT_POWER_WELL_DPIO_CMN_BC &&
-		     power_well->data != PUNIT_POWER_WELL_DPIO_CMN_D);
 
-	if (power_well->data == PUNIT_POWER_WELL_DPIO_CMN_BC) {
-		phy = DPIO_PHY0;
-		assert_pll_disabled(dev_priv, PIPE_A);
-		assert_pll_disabled(dev_priv, PIPE_B);
+	if (INTEL_INFO(dev_priv)->gen >= 7) {
+		dev_priv->display.fbc_enabled = ironlake_fbc_enabled;
+		dev_priv->display.enable_fbc = gen7_enable_fbc;
+		dev_priv->display.disable_fbc = ironlake_disable_fbc;
+	} else if (INTEL_INFO(dev_priv)->gen >= 5) {
+		dev_priv->display.fbc_enabled = ironlake_fbc_enabled;
+		dev_priv->display.enable_fbc = ironlake_enable_fbc;
+		dev_priv->display.disable_fbc = ironlake_disable_fbc;
+	} else if (IS_GM45(dev_priv)) {
+		dev_priv->display.fbc_enabled = g4x_fbc_enabled;
+		dev_priv->display.enable_fbc = g4x_enable_fbc;
+		dev_priv->display.disable_fbc = g4x_disable_fbc;
 	} else {
-		phy = DPIO_PHY1;
-		assert_pll_disabled(dev_priv, PIPE_C);
-	}
-
-	I915_WRITE(DISPLAY_PHY_CONTROL, I915_READ(DISPLAY_PHY_CONTROL) &
-		   ~PHY_COM_LANE_RESET_DEASSERT(phy));
-
-	vlv_set_power_well(dev_priv, power_well, false);
-}
-
-static bool chv_pipe_power_well_enabled(struct drm_i915_private *dev_priv,
-					struct i915_power_well *power_well)
-{
-	enum pipe pipe = power_well->data;
-	bool enabled;
-	u32 state, ctrl;
-
-	mutex_lock(&dev_priv->rps.hw_lock);
-
-	state = vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ) & DP_SSS_MASK(pipe);
-	/*
-	 * We only ever set the power-on and power-gate states, anything
-	 * else is unexpected.
-	 */
-	WARN_ON(state != DP_SSS_PWR_ON(pipe) && state != DP_SSS_PWR_GATE(pipe));
-	enabled = state == DP_SSS_PWR_ON(pipe);
-
-	/*
-	 * A transient state at this point would mean some unexpected party
-	 * is poking at the power controls too.
-	 */
-	ctrl = vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ) & DP_SSC_MASK(pipe);
-	WARN_ON(ctrl << 16 != state);
-
-	mutex_unlock(&dev_priv->rps.hw_lock);
-
-	return enabled;
-}
-
-static void chv_set_pipe_power_well(struct drm_i915_private *dev_priv,
-				    struct i915_power_well *power_well,
-				    bool enable)
-{
-	enum pipe pipe = power_well->data;
-	u32 state;
-	u32 ctrl;
-
-	state = enable ? DP_SSS_PWR_ON(pipe) : DP_SSS_PWR_GATE(pipe);
-
-	mutex_lock(&dev_priv->rps.hw_lock);
+		dev_priv->display.fbc_enabled = i8xx_fbc_enabled;
+		dev_priv->display.enable_fbc = i8xx_enable_fbc;
+		dev_priv->display.disable_fbc = i8xx_disable_fbc;
 
-#define COND \
-	((vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ) & DP_SSS_MASK(pipe)) == state)
-
-	if (COND)
-		goto out;
-
-	ctrl = vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ);
-	ctrl &= ~DP_SSC_MASK(pipe);
-	ctrl |= enable ? DP_SSC_PWR_ON(pipe) : DP_SSC_PWR_GATE(pipe);
-	vlv_punit_write(dev_priv, PUNIT_REG_DSPFREQ, ctrl);
-
-	if (wait_for(COND, 100))
-		DRM_ERROR("timout setting power well state %08x (%08x)\n",
-			  state,
-			  vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ));
-
-#undef COND
-
-out:
-	mutex_unlock(&dev_priv->rps.hw_lock);
-}
-
-static void chv_pipe_power_well_sync_hw(struct drm_i915_private *dev_priv,
-					struct i915_power_well *power_well)
-{
-	chv_set_pipe_power_well(dev_priv, power_well, power_well->count > 0);
-}
-
-static void chv_pipe_power_well_enable(struct drm_i915_private *dev_priv,
-				       struct i915_power_well *power_well)
-{
-	WARN_ON_ONCE(power_well->data != PIPE_A &&
-		     power_well->data != PIPE_B &&
-		     power_well->data != PIPE_C);
-
-	chv_set_pipe_power_well(dev_priv, power_well, true);
-}
-
-static void chv_pipe_power_well_disable(struct drm_i915_private *dev_priv,
-					struct i915_power_well *power_well)
-{
-	WARN_ON_ONCE(power_well->data != PIPE_A &&
-		     power_well->data != PIPE_B &&
-		     power_well->data != PIPE_C);
-
-	chv_set_pipe_power_well(dev_priv, power_well, false);
-}
-
-static void check_power_well_state(struct drm_i915_private *dev_priv,
-				   struct i915_power_well *power_well)
-{
-	bool enabled = power_well->ops->is_enabled(dev_priv, power_well);
-
-	if (power_well->always_on || !i915.disable_power_well) {
-		if (!enabled)
-			goto mismatch;
-
-		return;
-	}
-
-	if (enabled != (power_well->count > 0))
-		goto mismatch;
-
-	return;
-
-mismatch:
-	WARN(1, "state mismatch for '%s' (always_on %d hw state %d use-count %d disable_power_well %d\n",
-		  power_well->name, power_well->always_on, enabled,
-		  power_well->count, i915.disable_power_well);
-}
-
-void intel_display_power_get(struct drm_i915_private *dev_priv,
-			     enum intel_display_power_domain domain)
-{
-	struct i915_power_domains *power_domains;
-	struct i915_power_well *power_well;
-	int i;
-
-	intel_runtime_pm_get(dev_priv);
-
-	power_domains = &dev_priv->power_domains;
-
-	mutex_lock(&power_domains->lock);
-
-	for_each_power_well(i, power_well, BIT(domain), power_domains) {
-		if (!power_well->count++) {
-			DRM_DEBUG_KMS("enabling %s\n", power_well->name);
-			power_well->ops->enable(dev_priv, power_well);
-			power_well->hw_enabled = true;
-		}
-
-		check_power_well_state(dev_priv, power_well);
-	}
-
-	power_domains->domain_use_count[domain]++;
-
-	mutex_unlock(&power_domains->lock);
-}
-
-void intel_display_power_put(struct drm_i915_private *dev_priv,
-			     enum intel_display_power_domain domain)
-{
-	struct i915_power_domains *power_domains;
-	struct i915_power_well *power_well;
-	int i;
-
-	power_domains = &dev_priv->power_domains;
-
-	mutex_lock(&power_domains->lock);
-
-	WARN_ON(!power_domains->domain_use_count[domain]);
-	power_domains->domain_use_count[domain]--;
-
-	for_each_power_well_rev(i, power_well, BIT(domain), power_domains) {
-		WARN_ON(!power_well->count);
-
-		if (!--power_well->count && i915.disable_power_well) {
-			DRM_DEBUG_KMS("disabling %s\n", power_well->name);
-			power_well->hw_enabled = false;
-			power_well->ops->disable(dev_priv, power_well);
-		}
-
-		check_power_well_state(dev_priv, power_well);
-	}
-
-	mutex_unlock(&power_domains->lock);
-
-	intel_runtime_pm_put(dev_priv);
-}
-
-static struct i915_power_domains *hsw_pwr;
-
-/* Display audio driver power well request */
-int i915_request_power_well(void)
-{
-	struct drm_i915_private *dev_priv;
-
-	if (!hsw_pwr)
-		return -ENODEV;
-
-	dev_priv = container_of(hsw_pwr, struct drm_i915_private,
-				power_domains);
-	intel_display_power_get(dev_priv, POWER_DOMAIN_AUDIO);
-	return 0;
-}
-EXPORT_SYMBOL_GPL(i915_request_power_well);
-
-/* Display audio driver power well release */
-int i915_release_power_well(void)
-{
-	struct drm_i915_private *dev_priv;
-
-	if (!hsw_pwr)
-		return -ENODEV;
-
-	dev_priv = container_of(hsw_pwr, struct drm_i915_private,
-				power_domains);
-	intel_display_power_put(dev_priv, POWER_DOMAIN_AUDIO);
-	return 0;
-}
-EXPORT_SYMBOL_GPL(i915_release_power_well);
-
-/*
- * Private interface for the audio driver to get CDCLK in kHz.
- *
- * Caller must request power well using i915_request_power_well() prior to
- * making the call.
- */
-int i915_get_cdclk_freq(void)
-{
-	struct drm_i915_private *dev_priv;
-
-	if (!hsw_pwr)
-		return -ENODEV;
-
-	dev_priv = container_of(hsw_pwr, struct drm_i915_private,
-				power_domains);
-
-	return intel_ddi_get_cdclk_freq(dev_priv);
-}
-EXPORT_SYMBOL_GPL(i915_get_cdclk_freq);
-
-
-#define POWER_DOMAIN_MASK (BIT(POWER_DOMAIN_NUM) - 1)
-
-#define HSW_ALWAYS_ON_POWER_DOMAINS (			\
-	BIT(POWER_DOMAIN_PIPE_A) |			\
-	BIT(POWER_DOMAIN_TRANSCODER_EDP) |		\
-	BIT(POWER_DOMAIN_PORT_DDI_A_2_LANES) |		\
-	BIT(POWER_DOMAIN_PORT_DDI_A_4_LANES) |		\
-	BIT(POWER_DOMAIN_PORT_DDI_B_2_LANES) |		\
-	BIT(POWER_DOMAIN_PORT_DDI_B_4_LANES) |		\
-	BIT(POWER_DOMAIN_PORT_DDI_C_2_LANES) |		\
-	BIT(POWER_DOMAIN_PORT_DDI_C_4_LANES) |		\
-	BIT(POWER_DOMAIN_PORT_DDI_D_2_LANES) |		\
-	BIT(POWER_DOMAIN_PORT_DDI_D_4_LANES) |		\
-	BIT(POWER_DOMAIN_PORT_CRT) |			\
-	BIT(POWER_DOMAIN_PLLS) |			\
-	BIT(POWER_DOMAIN_INIT))
-#define HSW_DISPLAY_POWER_DOMAINS (				\
-	(POWER_DOMAIN_MASK & ~HSW_ALWAYS_ON_POWER_DOMAINS) |	\
-	BIT(POWER_DOMAIN_INIT))
-
-#define BDW_ALWAYS_ON_POWER_DOMAINS (			\
-	HSW_ALWAYS_ON_POWER_DOMAINS |			\
-	BIT(POWER_DOMAIN_PIPE_A_PANEL_FITTER))
-#define BDW_DISPLAY_POWER_DOMAINS (				\
-	(POWER_DOMAIN_MASK & ~BDW_ALWAYS_ON_POWER_DOMAINS) |	\
-	BIT(POWER_DOMAIN_INIT))
-
-#define VLV_ALWAYS_ON_POWER_DOMAINS	BIT(POWER_DOMAIN_INIT)
-#define VLV_DISPLAY_POWER_DOMAINS	POWER_DOMAIN_MASK
-
-#define VLV_DPIO_CMN_BC_POWER_DOMAINS (		\
-	BIT(POWER_DOMAIN_PORT_DDI_B_2_LANES) |	\
-	BIT(POWER_DOMAIN_PORT_DDI_B_4_LANES) |	\
-	BIT(POWER_DOMAIN_PORT_DDI_C_2_LANES) |	\
-	BIT(POWER_DOMAIN_PORT_DDI_C_4_LANES) |	\
-	BIT(POWER_DOMAIN_PORT_CRT) |		\
-	BIT(POWER_DOMAIN_INIT))
-
-#define VLV_DPIO_TX_B_LANES_01_POWER_DOMAINS (	\
-	BIT(POWER_DOMAIN_PORT_DDI_B_2_LANES) |	\
-	BIT(POWER_DOMAIN_PORT_DDI_B_4_LANES) |	\
-	BIT(POWER_DOMAIN_INIT))
-
-#define VLV_DPIO_TX_B_LANES_23_POWER_DOMAINS (	\
-	BIT(POWER_DOMAIN_PORT_DDI_B_4_LANES) |	\
-	BIT(POWER_DOMAIN_INIT))
-
-#define VLV_DPIO_TX_C_LANES_01_POWER_DOMAINS (	\
-	BIT(POWER_DOMAIN_PORT_DDI_C_2_LANES) |	\
-	BIT(POWER_DOMAIN_PORT_DDI_C_4_LANES) |	\
-	BIT(POWER_DOMAIN_INIT))
-
-#define VLV_DPIO_TX_C_LANES_23_POWER_DOMAINS (	\
-	BIT(POWER_DOMAIN_PORT_DDI_C_4_LANES) |	\
-	BIT(POWER_DOMAIN_INIT))
-
-#define CHV_PIPE_A_POWER_DOMAINS (	\
-	BIT(POWER_DOMAIN_PIPE_A) |	\
-	BIT(POWER_DOMAIN_INIT))
-
-#define CHV_PIPE_B_POWER_DOMAINS (	\
-	BIT(POWER_DOMAIN_PIPE_B) |	\
-	BIT(POWER_DOMAIN_INIT))
-
-#define CHV_PIPE_C_POWER_DOMAINS (	\
-	BIT(POWER_DOMAIN_PIPE_C) |	\
-	BIT(POWER_DOMAIN_INIT))
-
-#define CHV_DPIO_CMN_BC_POWER_DOMAINS (		\
-	BIT(POWER_DOMAIN_PORT_DDI_B_2_LANES) |	\
-	BIT(POWER_DOMAIN_PORT_DDI_B_4_LANES) |	\
-	BIT(POWER_DOMAIN_PORT_DDI_C_2_LANES) |	\
-	BIT(POWER_DOMAIN_PORT_DDI_C_4_LANES) |	\
-	BIT(POWER_DOMAIN_INIT))
-
-#define CHV_DPIO_CMN_D_POWER_DOMAINS (		\
-	BIT(POWER_DOMAIN_PORT_DDI_D_2_LANES) |	\
-	BIT(POWER_DOMAIN_PORT_DDI_D_4_LANES) |	\
-	BIT(POWER_DOMAIN_INIT))
-
-#define CHV_DPIO_TX_D_LANES_01_POWER_DOMAINS (	\
-	BIT(POWER_DOMAIN_PORT_DDI_D_2_LANES) |	\
-	BIT(POWER_DOMAIN_PORT_DDI_D_4_LANES) |	\
-	BIT(POWER_DOMAIN_INIT))
-
-#define CHV_DPIO_TX_D_LANES_23_POWER_DOMAINS (	\
-	BIT(POWER_DOMAIN_PORT_DDI_D_4_LANES) |	\
-	BIT(POWER_DOMAIN_INIT))
-
-static const struct i915_power_well_ops i9xx_always_on_power_well_ops = {
-	.sync_hw = i9xx_always_on_power_well_noop,
-	.enable = i9xx_always_on_power_well_noop,
-	.disable = i9xx_always_on_power_well_noop,
-	.is_enabled = i9xx_always_on_power_well_enabled,
-};
-
-static const struct i915_power_well_ops chv_pipe_power_well_ops = {
-	.sync_hw = chv_pipe_power_well_sync_hw,
-	.enable = chv_pipe_power_well_enable,
-	.disable = chv_pipe_power_well_disable,
-	.is_enabled = chv_pipe_power_well_enabled,
-};
-
-static const struct i915_power_well_ops chv_dpio_cmn_power_well_ops = {
-	.sync_hw = vlv_power_well_sync_hw,
-	.enable = chv_dpio_cmn_power_well_enable,
-	.disable = chv_dpio_cmn_power_well_disable,
-	.is_enabled = vlv_power_well_enabled,
-};
-
-static struct i915_power_well i9xx_always_on_power_well[] = {
-	{
-		.name = "always-on",
-		.always_on = 1,
-		.domains = POWER_DOMAIN_MASK,
-		.ops = &i9xx_always_on_power_well_ops,
-	},
-};
-
-static const struct i915_power_well_ops hsw_power_well_ops = {
-	.sync_hw = hsw_power_well_sync_hw,
-	.enable = hsw_power_well_enable,
-	.disable = hsw_power_well_disable,
-	.is_enabled = hsw_power_well_enabled,
-};
-
-static struct i915_power_well hsw_power_wells[] = {
-	{
-		.name = "always-on",
-		.always_on = 1,
-		.domains = HSW_ALWAYS_ON_POWER_DOMAINS,
-		.ops = &i9xx_always_on_power_well_ops,
-	},
-	{
-		.name = "display",
-		.domains = HSW_DISPLAY_POWER_DOMAINS,
-		.ops = &hsw_power_well_ops,
-	},
-};
-
-static struct i915_power_well bdw_power_wells[] = {
-	{
-		.name = "always-on",
-		.always_on = 1,
-		.domains = BDW_ALWAYS_ON_POWER_DOMAINS,
-		.ops = &i9xx_always_on_power_well_ops,
-	},
-	{
-		.name = "display",
-		.domains = BDW_DISPLAY_POWER_DOMAINS,
-		.ops = &hsw_power_well_ops,
-	},
-};
-
-static const struct i915_power_well_ops vlv_display_power_well_ops = {
-	.sync_hw = vlv_power_well_sync_hw,
-	.enable = vlv_display_power_well_enable,
-	.disable = vlv_display_power_well_disable,
-	.is_enabled = vlv_power_well_enabled,
-};
-
-static const struct i915_power_well_ops vlv_dpio_cmn_power_well_ops = {
-	.sync_hw = vlv_power_well_sync_hw,
-	.enable = vlv_dpio_cmn_power_well_enable,
-	.disable = vlv_dpio_cmn_power_well_disable,
-	.is_enabled = vlv_power_well_enabled,
-};
-
-static const struct i915_power_well_ops vlv_dpio_power_well_ops = {
-	.sync_hw = vlv_power_well_sync_hw,
-	.enable = vlv_power_well_enable,
-	.disable = vlv_power_well_disable,
-	.is_enabled = vlv_power_well_enabled,
-};
-
-static struct i915_power_well vlv_power_wells[] = {
-	{
-		.name = "always-on",
-		.always_on = 1,
-		.domains = VLV_ALWAYS_ON_POWER_DOMAINS,
-		.ops = &i9xx_always_on_power_well_ops,
-	},
-	{
-		.name = "display",
-		.domains = VLV_DISPLAY_POWER_DOMAINS,
-		.data = PUNIT_POWER_WELL_DISP2D,
-		.ops = &vlv_display_power_well_ops,
-	},
-	{
-		.name = "dpio-tx-b-01",
-		.domains = VLV_DPIO_TX_B_LANES_01_POWER_DOMAINS |
-			   VLV_DPIO_TX_B_LANES_23_POWER_DOMAINS |
-			   VLV_DPIO_TX_C_LANES_01_POWER_DOMAINS |
-			   VLV_DPIO_TX_C_LANES_23_POWER_DOMAINS,
-		.ops = &vlv_dpio_power_well_ops,
-		.data = PUNIT_POWER_WELL_DPIO_TX_B_LANES_01,
-	},
-	{
-		.name = "dpio-tx-b-23",
-		.domains = VLV_DPIO_TX_B_LANES_01_POWER_DOMAINS |
-			   VLV_DPIO_TX_B_LANES_23_POWER_DOMAINS |
-			   VLV_DPIO_TX_C_LANES_01_POWER_DOMAINS |
-			   VLV_DPIO_TX_C_LANES_23_POWER_DOMAINS,
-		.ops = &vlv_dpio_power_well_ops,
-		.data = PUNIT_POWER_WELL_DPIO_TX_B_LANES_23,
-	},
-	{
-		.name = "dpio-tx-c-01",
-		.domains = VLV_DPIO_TX_B_LANES_01_POWER_DOMAINS |
-			   VLV_DPIO_TX_B_LANES_23_POWER_DOMAINS |
-			   VLV_DPIO_TX_C_LANES_01_POWER_DOMAINS |
-			   VLV_DPIO_TX_C_LANES_23_POWER_DOMAINS,
-		.ops = &vlv_dpio_power_well_ops,
-		.data = PUNIT_POWER_WELL_DPIO_TX_C_LANES_01,
-	},
-	{
-		.name = "dpio-tx-c-23",
-		.domains = VLV_DPIO_TX_B_LANES_01_POWER_DOMAINS |
-			   VLV_DPIO_TX_B_LANES_23_POWER_DOMAINS |
-			   VLV_DPIO_TX_C_LANES_01_POWER_DOMAINS |
-			   VLV_DPIO_TX_C_LANES_23_POWER_DOMAINS,
-		.ops = &vlv_dpio_power_well_ops,
-		.data = PUNIT_POWER_WELL_DPIO_TX_C_LANES_23,
-	},
-	{
-		.name = "dpio-common",
-		.domains = VLV_DPIO_CMN_BC_POWER_DOMAINS,
-		.data = PUNIT_POWER_WELL_DPIO_CMN_BC,
-		.ops = &vlv_dpio_cmn_power_well_ops,
-	},
-};
-
-static struct i915_power_well chv_power_wells[] = {
-	{
-		.name = "always-on",
-		.always_on = 1,
-		.domains = VLV_ALWAYS_ON_POWER_DOMAINS,
-		.ops = &i9xx_always_on_power_well_ops,
-	},
-#if 0
-	{
-		.name = "display",
-		.domains = VLV_DISPLAY_POWER_DOMAINS,
-		.data = PUNIT_POWER_WELL_DISP2D,
-		.ops = &vlv_display_power_well_ops,
-	},
-	{
-		.name = "pipe-a",
-		.domains = CHV_PIPE_A_POWER_DOMAINS,
-		.data = PIPE_A,
-		.ops = &chv_pipe_power_well_ops,
-	},
-	{
-		.name = "pipe-b",
-		.domains = CHV_PIPE_B_POWER_DOMAINS,
-		.data = PIPE_B,
-		.ops = &chv_pipe_power_well_ops,
-	},
-	{
-		.name = "pipe-c",
-		.domains = CHV_PIPE_C_POWER_DOMAINS,
-		.data = PIPE_C,
-		.ops = &chv_pipe_power_well_ops,
-	},
-#endif
-	{
-		.name = "dpio-common-bc",
-		/*
-		 * XXX: cmnreset for one PHY seems to disturb the other.
-		 * As a workaround keep both powered on at the same
-		 * time for now.
-		 */
-		.domains = CHV_DPIO_CMN_BC_POWER_DOMAINS | CHV_DPIO_CMN_D_POWER_DOMAINS,
-		.data = PUNIT_POWER_WELL_DPIO_CMN_BC,
-		.ops = &chv_dpio_cmn_power_well_ops,
-	},
-	{
-		.name = "dpio-common-d",
-		/*
-		 * XXX: cmnreset for one PHY seems to disturb the other.
-		 * As a workaround keep both powered on at the same
-		 * time for now.
-		 */
-		.domains = CHV_DPIO_CMN_BC_POWER_DOMAINS | CHV_DPIO_CMN_D_POWER_DOMAINS,
-		.data = PUNIT_POWER_WELL_DPIO_CMN_D,
-		.ops = &chv_dpio_cmn_power_well_ops,
-	},
-#if 0
-	{
-		.name = "dpio-tx-b-01",
-		.domains = VLV_DPIO_TX_B_LANES_01_POWER_DOMAINS |
-			   VLV_DPIO_TX_B_LANES_23_POWER_DOMAINS,
-		.ops = &vlv_dpio_power_well_ops,
-		.data = PUNIT_POWER_WELL_DPIO_TX_B_LANES_01,
-	},
-	{
-		.name = "dpio-tx-b-23",
-		.domains = VLV_DPIO_TX_B_LANES_01_POWER_DOMAINS |
-			   VLV_DPIO_TX_B_LANES_23_POWER_DOMAINS,
-		.ops = &vlv_dpio_power_well_ops,
-		.data = PUNIT_POWER_WELL_DPIO_TX_B_LANES_23,
-	},
-	{
-		.name = "dpio-tx-c-01",
-		.domains = VLV_DPIO_TX_C_LANES_01_POWER_DOMAINS |
-			   VLV_DPIO_TX_C_LANES_23_POWER_DOMAINS,
-		.ops = &vlv_dpio_power_well_ops,
-		.data = PUNIT_POWER_WELL_DPIO_TX_C_LANES_01,
-	},
-	{
-		.name = "dpio-tx-c-23",
-		.domains = VLV_DPIO_TX_C_LANES_01_POWER_DOMAINS |
-			   VLV_DPIO_TX_C_LANES_23_POWER_DOMAINS,
-		.ops = &vlv_dpio_power_well_ops,
-		.data = PUNIT_POWER_WELL_DPIO_TX_C_LANES_23,
-	},
-	{
-		.name = "dpio-tx-d-01",
-		.domains = CHV_DPIO_TX_D_LANES_01_POWER_DOMAINS |
-			   CHV_DPIO_TX_D_LANES_23_POWER_DOMAINS,
-		.ops = &vlv_dpio_power_well_ops,
-		.data = PUNIT_POWER_WELL_DPIO_TX_D_LANES_01,
-	},
-	{
-		.name = "dpio-tx-d-23",
-		.domains = CHV_DPIO_TX_D_LANES_01_POWER_DOMAINS |
-			   CHV_DPIO_TX_D_LANES_23_POWER_DOMAINS,
-		.ops = &vlv_dpio_power_well_ops,
-		.data = PUNIT_POWER_WELL_DPIO_TX_D_LANES_23,
-	},
-#endif
-};
-
-static struct i915_power_well *lookup_power_well(struct drm_i915_private *dev_priv,
-						 enum punit_power_well power_well_id)
-{
-	struct i915_power_domains *power_domains = &dev_priv->power_domains;
-	struct i915_power_well *power_well;
-	int i;
-
-	for_each_power_well(i, power_well, POWER_DOMAIN_MASK, power_domains) {
-		if (power_well->data == power_well_id)
-			return power_well;
+		/* This value was pulled out of someone's hat */
+		I915_WRITE(FBC_CONTROL, 500 << FBC_CTL_INTERVAL_SHIFT);
 	}
 
-	return NULL;
-}
-
-#define set_power_wells(power_domains, __power_wells) ({		\
-	(power_domains)->power_wells = (__power_wells);			\
-	(power_domains)->power_well_count = ARRAY_SIZE(__power_wells);	\
-})
-
-int intel_power_domains_init(struct drm_i915_private *dev_priv)
-{
-	struct i915_power_domains *power_domains = &dev_priv->power_domains;
-
-	mutex_init(&power_domains->lock);
-
-	/*
-	 * The enabling order will be from lower to higher indexed wells,
-	 * the disabling order is reversed.
-	 */
-	if (IS_HASWELL(dev_priv->dev)) {
-		set_power_wells(power_domains, hsw_power_wells);
-		hsw_pwr = power_domains;
-	} else if (IS_BROADWELL(dev_priv->dev)) {
-		set_power_wells(power_domains, bdw_power_wells);
-		hsw_pwr = power_domains;
-	} else if (IS_CHERRYVIEW(dev_priv->dev)) {
-		set_power_wells(power_domains, chv_power_wells);
-	} else if (IS_VALLEYVIEW(dev_priv->dev)) {
-		set_power_wells(power_domains, vlv_power_wells);
-	} else {
-		set_power_wells(power_domains, i9xx_always_on_power_well);
-	}
-
-	return 0;
-}
-
-void intel_power_domains_remove(struct drm_i915_private *dev_priv)
-{
-	hsw_pwr = NULL;
-}
-
-static void intel_power_domains_resume(struct drm_i915_private *dev_priv)
-{
-	struct i915_power_domains *power_domains = &dev_priv->power_domains;
-	struct i915_power_well *power_well;
-	int i;
-
-	mutex_lock(&power_domains->lock);
-	for_each_power_well(i, power_well, POWER_DOMAIN_MASK, power_domains) {
-		power_well->ops->sync_hw(dev_priv, power_well);
-		power_well->hw_enabled = power_well->ops->is_enabled(dev_priv,
-								     power_well);
-	}
-	mutex_unlock(&power_domains->lock);
-}
-
-static void vlv_cmnlane_wa(struct drm_i915_private *dev_priv)
-{
-	struct i915_power_well *cmn =
-		lookup_power_well(dev_priv, PUNIT_POWER_WELL_DPIO_CMN_BC);
-	struct i915_power_well *disp2d =
-		lookup_power_well(dev_priv, PUNIT_POWER_WELL_DISP2D);
-
-	/* nothing to do if common lane is already off */
-	if (!cmn->ops->is_enabled(dev_priv, cmn))
-		return;
-
-	/* If the display might be already active skip this */
-	if (disp2d->ops->is_enabled(dev_priv, disp2d) &&
-	    I915_READ(DPIO_CTL) & DPIO_CMNRST)
-		return;
-
-	DRM_DEBUG_KMS("toggling display PHY side reset\n");
-
-	/* cmnlane needs DPLL registers */
-	disp2d->ops->enable(dev_priv, disp2d);
-
-	/*
-	 * From VLV2A0_DP_eDP_HDMI_DPIO_driver_vbios_notes_11.docx:
-	 * Need to assert and de-assert PHY SB reset by gating the
-	 * common lane power, then un-gating it.
-	 * Simply ungating isn't enough to reset the PHY enough to get
-	 * ports and lanes running.
-	 */
-	cmn->ops->disable(dev_priv, cmn);
-}
-
-void intel_power_domains_init_hw(struct drm_i915_private *dev_priv)
-{
-	struct drm_device *dev = dev_priv->dev;
-	struct i915_power_domains *power_domains = &dev_priv->power_domains;
-
-	power_domains->initializing = true;
-
-	if (IS_VALLEYVIEW(dev) && !IS_CHERRYVIEW(dev)) {
-		mutex_lock(&power_domains->lock);
-		vlv_cmnlane_wa(dev_priv);
-		mutex_unlock(&power_domains->lock);
-	}
-
-	/* For now, we need the power well to be always enabled. */
-	intel_display_set_init_power(dev_priv, true);
-	intel_power_domains_resume(dev_priv);
-	power_domains->initializing = false;
-}
-
-void intel_aux_display_runtime_get(struct drm_i915_private *dev_priv)
-{
-	intel_runtime_pm_get(dev_priv);
-}
-
-void intel_aux_display_runtime_put(struct drm_i915_private *dev_priv)
-{
-	intel_runtime_pm_put(dev_priv);
-}
-
-void intel_runtime_pm_get(struct drm_i915_private *dev_priv)
-{
-	struct drm_device *dev = dev_priv->dev;
-	struct device *device = &dev->pdev->dev;
-
-	if (!HAS_RUNTIME_PM(dev))
-		return;
-
-	pm_runtime_get_sync(device);
-	WARN(dev_priv->pm.suspended, "Device still suspended.\n");
-}
-
-void intel_runtime_pm_get_noresume(struct drm_i915_private *dev_priv)
-{
-	struct drm_device *dev = dev_priv->dev;
-	struct device *device = &dev->pdev->dev;
-
-	if (!HAS_RUNTIME_PM(dev))
-		return;
-
-	WARN(dev_priv->pm.suspended, "Getting nosync-ref while suspended.\n");
-	pm_runtime_get_noresume(device);
-}
-
-void intel_runtime_pm_put(struct drm_i915_private *dev_priv)
-{
-	struct drm_device *dev = dev_priv->dev;
-	struct device *device = &dev->pdev->dev;
-
-	if (!HAS_RUNTIME_PM(dev))
-		return;
-
-	pm_runtime_mark_last_busy(device);
-	pm_runtime_put_autosuspend(device);
-}
-
-void intel_init_runtime_pm(struct drm_i915_private *dev_priv)
-{
-	struct drm_device *dev = dev_priv->dev;
-	struct device *device = &dev->pdev->dev;
-
-	if (!HAS_RUNTIME_PM(dev))
-		return;
-
-	pm_runtime_set_active(device);
-
-	/*
-	 * RPM depends on RC6 to save restore the GT HW context, so make RC6 a
-	 * requirement.
-	 */
-	if (!intel_enable_rc6(dev)) {
-		DRM_INFO("RC6 disabled, disabling runtime PM support\n");
-		return;
-	}
-
-	pm_runtime_set_autosuspend_delay(device, 10000); /* 10s */
-	pm_runtime_mark_last_busy(device);
-	pm_runtime_use_autosuspend(device);
-
-	pm_runtime_put_autosuspend(device);
-}
-
-void intel_fini_runtime_pm(struct drm_i915_private *dev_priv)
-{
-	struct drm_device *dev = dev_priv->dev;
-	struct device *device = &dev->pdev->dev;
-
-	if (!HAS_RUNTIME_PM(dev))
-		return;
-
-	if (!intel_enable_rc6(dev))
-		return;
-
-	/* Make sure we're not suspended first. */
-	pm_runtime_get_sync(device);
-	pm_runtime_disable(device);
+	dev_priv->fbc.enabled = dev_priv->display.fbc_enabled(dev_priv->dev);
 }
 
 /* Set up chip specific power management-related functions */
@@ -7203,28 +6112,7 @@ void intel_init_pm(struct drm_device *dev)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
 
-	if (HAS_FBC(dev)) {
-		if (INTEL_INFO(dev)->gen >= 7) {
-			dev_priv->display.fbc_enabled = ironlake_fbc_enabled;
-			dev_priv->display.enable_fbc = gen7_enable_fbc;
-			dev_priv->display.disable_fbc = ironlake_disable_fbc;
-		} else if (INTEL_INFO(dev)->gen >= 5) {
-			dev_priv->display.fbc_enabled = ironlake_fbc_enabled;
-			dev_priv->display.enable_fbc = ironlake_enable_fbc;
-			dev_priv->display.disable_fbc = ironlake_disable_fbc;
-		} else if (IS_GM45(dev)) {
-			dev_priv->display.fbc_enabled = g4x_fbc_enabled;
-			dev_priv->display.enable_fbc = g4x_enable_fbc;
-			dev_priv->display.disable_fbc = g4x_disable_fbc;
-		} else {
-			dev_priv->display.fbc_enabled = i8xx_fbc_enabled;
-			dev_priv->display.enable_fbc = i8xx_enable_fbc;
-			dev_priv->display.disable_fbc = i8xx_disable_fbc;
-
-			/* This value was pulled out of someone's hat */
-			I915_WRITE(FBC_CONTROL, 500 << FBC_CTL_INTERVAL_SHIFT);
-		}
-	}
+	intel_init_fbc(dev_priv);
 
 	/* For cxsr */
 	if (IS_PINEVIEW(dev))
@@ -7233,7 +6121,9 @@ void intel_init_pm(struct drm_device *dev)
 		i915_ironlake_get_mem_freq(dev);
 
 	/* For FIFO watermark updates */
-	if (HAS_PCH_SPLIT(dev)) {
+	if (IS_GEN9(dev)) {
+		dev_priv->display.init_clock_gating = gen9_init_clock_gating;
+	} else if (HAS_PCH_SPLIT(dev)) {
 		ilk_setup_wm_latency(dev);
 
 		if ((IS_GEN5(dev) && dev_priv->wm.pri_latency[1] &&
@@ -7490,5 +6380,4 @@ void intel_pm_setup(struct drm_device *dev)
 			  intel_gen6_powersave_work);
 
 	dev_priv->pm.suspended = false;
-	dev_priv->pm._irqs_disabled = false;
 }

drivers/gpu/drm/i915/intel_ringbuffer.c

@@ -729,8 +729,12 @@ static int bdw_init_workarounds(struct intel_engine_cs *ring)
 	 * workaround for for a possible hang in the unlikely event a TLB
 	 * invalidation occurs during a PSD flush.
 	 */
+	/* WaDisableFenceDestinationToSLM:bdw (GT3 pre-production) */
 	intel_ring_emit_wa(ring, HDC_CHICKEN0,
-			   _MASKED_BIT_ENABLE(HDC_FORCE_NON_COHERENT));
+			   _MASKED_BIT_ENABLE(HDC_FORCE_NON_COHERENT |
+					      (IS_BDW_GT3(dev) ?
+					       HDC_FENCE_DEST_SLM_DISABLE : 0)
+				   ));
 
 	/* Wa4x4STCOptimizationDisable:bdw */
 	intel_ring_emit_wa(ring, CACHE_MODE_1,
@@ -812,7 +816,7 @@ static int init_render_ring(struct intel_engine_cs *ring)
 	 *
 	 * WaDisableAsyncFlipPerfMode:snb,ivb,hsw,vlv,bdw,chv
 	 */
-	if (INTEL_INFO(dev)->gen >= 6)
+	if (INTEL_INFO(dev)->gen >= 6 && INTEL_INFO(dev)->gen < 9)
 		I915_WRITE(MI_MODE, _MASKED_BIT_ENABLE(ASYNC_FLIP_PERF_DISABLE));
 
 	/* Required for the hardware to program scanline values for waiting */
@@ -1186,7 +1190,7 @@ gen5_ring_get_irq(struct intel_engine_cs *ring)
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	unsigned long flags;
 
-	if (!dev->irq_enabled)
+	if (WARN_ON(!intel_irqs_enabled(dev_priv)))
 		return false;
 
 	spin_lock_irqsave(&dev_priv->irq_lock, flags);
@@ -1217,7 +1221,7 @@ i9xx_ring_get_irq(struct intel_engine_cs *ring)
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	unsigned long flags;
 
-	if (!dev->irq_enabled)
+	if (!intel_irqs_enabled(dev_priv))
 		return false;
 
 	spin_lock_irqsave(&dev_priv->irq_lock, flags);
@@ -1254,7 +1258,7 @@ i8xx_ring_get_irq(struct intel_engine_cs *ring)
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	unsigned long flags;
 
-	if (!dev->irq_enabled)
+	if (!intel_irqs_enabled(dev_priv))
 		return false;
 
 	spin_lock_irqsave(&dev_priv->irq_lock, flags);
@@ -1388,8 +1392,8 @@ gen6_ring_get_irq(struct intel_engine_cs *ring)
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	unsigned long flags;
 
-	if (!dev->irq_enabled)
-	       return false;
+	if (WARN_ON(!intel_irqs_enabled(dev_priv)))
+		return false;
 
 	spin_lock_irqsave(&dev_priv->irq_lock, flags);
 	if (ring->irq_refcount++ == 0) {
@@ -1431,7 +1435,7 @@ hsw_vebox_get_irq(struct intel_engine_cs *ring)
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	unsigned long flags;
 
-	if (!dev->irq_enabled)
+	if (WARN_ON(!intel_irqs_enabled(dev_priv)))
 		return false;
 
 	spin_lock_irqsave(&dev_priv->irq_lock, flags);
@@ -1451,9 +1455,6 @@ hsw_vebox_put_irq(struct intel_engine_cs *ring)
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	unsigned long flags;
 
-	if (!dev->irq_enabled)
-		return;
-
 	spin_lock_irqsave(&dev_priv->irq_lock, flags);
 	if (--ring->irq_refcount == 0) {
 		I915_WRITE_IMR(ring, ~0);
@@ -1469,7 +1470,7 @@ gen8_ring_get_irq(struct intel_engine_cs *ring)
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	unsigned long flags;
 
-	if (!dev->irq_enabled)
+	if (WARN_ON(!intel_irqs_enabled(dev_priv)))
 		return false;
 
 	spin_lock_irqsave(&dev_priv->irq_lock, flags);
@@ -2229,6 +2230,7 @@ static int gen6_ring_flush(struct intel_engine_cs *ring,
 			   u32 invalidate, u32 flush)
 {
 	struct drm_device *dev = ring->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
 	uint32_t cmd;
 	int ret;
 
@@ -2259,8 +2261,12 @@ static int gen6_ring_flush(struct intel_engine_cs *ring,
 	}
 	intel_ring_advance(ring);
 
-	if (IS_GEN7(dev) && !invalidate && flush)
-		return gen7_ring_fbc_flush(ring, FBC_REND_CACHE_CLEAN);
+	if (!invalidate && flush) {
+		if (IS_GEN7(dev))
+			return gen7_ring_fbc_flush(ring, FBC_REND_CACHE_CLEAN);
+		else if (IS_BROADWELL(dev))
+			dev_priv->fbc.need_sw_cache_clean = true;
+	}
 
 	return 0;
 }

drivers/gpu/drm/i915/intel_runtime_pm.c

@@ -0,0 +1,1375 @@
+/*
+ * Copyright © 2012-2014 Intel Corporation
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
+ * IN THE SOFTWARE.
+ *
+ * Authors:
+ *    Eugeni Dodonov <eugeni.dodonov@intel.com>
+ *    Daniel Vetter <daniel.vetter@ffwll.ch>
+ *
+ */
+
+#include <linux/pm_runtime.h>
+#include <linux/vgaarb.h>
+
+#include "i915_drv.h"
+#include "intel_drv.h"
+#include <drm/i915_powerwell.h>
+
+/**
+ * DOC: runtime pm
+ *
+ * The i915 driver supports dynamic enabling and disabling of entire hardware
+ * blocks at runtime. This is especially important on the display side where
+ * software is supposed to control many power gates manually on recent hardware,
+ * since on the GT side a lot of the power management is done by the hardware.
+ * But even there some manual control at the device level is required.
+ *
+ * Since i915 supports a diverse set of platforms with a unified codebase and
+ * hardware engineers just love to shuffle functionality around between power
+ * domains there's a sizeable amount of indirection required. This file provides
+ * generic functions to the driver for grabbing and releasing references for
+ * abstract power domains. It then maps those to the actual power wells
+ * present for a given platform.
+ */
+
+static struct i915_power_domains *hsw_pwr;
+
+#define for_each_power_well(i, power_well, domain_mask, power_domains)	\
+	for (i = 0;							\
+	     i < (power_domains)->power_well_count &&			\
+		 ((power_well) = &(power_domains)->power_wells[i]);	\
+	     i++)							\
+		if ((power_well)->domains & (domain_mask))
+
+#define for_each_power_well_rev(i, power_well, domain_mask, power_domains) \
+	for (i = (power_domains)->power_well_count - 1;			 \
+	     i >= 0 && ((power_well) = &(power_domains)->power_wells[i]);\
+	     i--)							 \
+		if ((power_well)->domains & (domain_mask))
+
+/*
+ * We should only use the power well if we explicitly asked the hardware to
+ * enable it, so check if it's enabled and also check if we've requested it to
+ * be enabled.
+ */
+static bool hsw_power_well_enabled(struct drm_i915_private *dev_priv,
+				   struct i915_power_well *power_well)
+{
+	return I915_READ(HSW_PWR_WELL_DRIVER) ==
+		     (HSW_PWR_WELL_ENABLE_REQUEST | HSW_PWR_WELL_STATE_ENABLED);
+}
+
+/**
+ * __intel_display_power_is_enabled - unlocked check for a power domain
+ * @dev_priv: i915 device instance
+ * @domain: power domain to check
+ *
+ * This is the unlocked version of intel_display_power_is_enabled() and should
+ * only be used from error capture and recovery code where deadlocks are
+ * possible.
+ *
+ * Returns:
+ * True when the power domain is enabled, false otherwise.
+ */
+bool __intel_display_power_is_enabled(struct drm_i915_private *dev_priv,
+				      enum intel_display_power_domain domain)
+{
+	struct i915_power_domains *power_domains;
+	struct i915_power_well *power_well;
+	bool is_enabled;
+	int i;
+
+	if (dev_priv->pm.suspended)
+		return false;
+
+	power_domains = &dev_priv->power_domains;
+
+	is_enabled = true;
+
+	for_each_power_well_rev(i, power_well, BIT(domain), power_domains) {
+		if (power_well->always_on)
+			continue;
+
+		if (!power_well->hw_enabled) {
+			is_enabled = false;
+			break;
+		}
+	}
+
+	return is_enabled;
+}
+
+/**
+ * intel_display_power_is_enabled - unlocked check for a power domain
+ * @dev_priv: i915 device instance
+ * @domain: power domain to check
+ *
+ * This function can be used to check the hw power domain state. It is mostly
+ * used in hardware state readout functions. Everywhere else code should rely
+ * upon explicit power domain reference counting to ensure that the hardware
+ * block is powered up before accessing it.
+ *
+ * Callers must hold the relevant modesetting locks to ensure that concurrent
+ * threads can't disable the power well while the caller tries to read a few
+ * registers.
+ *
+ * Returns:
+ * True when the power domain is enabled, false otherwise.
+ */
+bool intel_display_power_is_enabled(struct drm_i915_private *dev_priv,
+				    enum intel_display_power_domain domain)
+{
+	struct i915_power_domains *power_domains;
+	bool ret;
+
+	power_domains = &dev_priv->power_domains;
+
+	mutex_lock(&power_domains->lock);
+	ret = __intel_display_power_is_enabled(dev_priv, domain);
+	mutex_unlock(&power_domains->lock);
+
+	return ret;
+}
+
+/**
+ * intel_display_set_init_power - set the initial power domain state
+ * @dev_priv: i915 device instance
+ * @enable: whether to enable or disable the initial power domain state
+ *
+ * For simplicity our driver load/unload and system suspend/resume code assumes
+ * that all power domains are always enabled. This functions controls the state
+ * of this little hack. While the initial power domain state is enabled runtime
+ * pm is effectively disabled.
+ */
+void intel_display_set_init_power(struct drm_i915_private *dev_priv,
+				  bool enable)
+{
+	if (dev_priv->power_domains.init_power_on == enable)
+		return;
+
+	if (enable)
+		intel_display_power_get(dev_priv, POWER_DOMAIN_INIT);
+	else
+		intel_display_power_put(dev_priv, POWER_DOMAIN_INIT);
+
+	dev_priv->power_domains.init_power_on = enable;
+}
+
+/*
+ * Starting with Haswell, we have a "Power Down Well" that can be turned off
+ * when not needed anymore. We have 4 registers that can request the power well
+ * to be enabled, and it will only be disabled if none of the registers is
+ * requesting it to be enabled.
+ */
+static void hsw_power_well_post_enable(struct drm_i915_private *dev_priv)
+{
+	struct drm_device *dev = dev_priv->dev;
+
+	/*
+	 * After we re-enable the power well, if we touch VGA register 0x3d5
+	 * we'll get unclaimed register interrupts. This stops after we write
+	 * anything to the VGA MSR register. The vgacon module uses this
+	 * register all the time, so if we unbind our driver and, as a
+	 * consequence, bind vgacon, we'll get stuck in an infinite loop at
+	 * console_unlock(). So make here we touch the VGA MSR register, making
+	 * sure vgacon can keep working normally without triggering interrupts
+	 * and error messages.
+	 */
+	vga_get_uninterruptible(dev->pdev, VGA_RSRC_LEGACY_IO);
+	outb(inb(VGA_MSR_READ), VGA_MSR_WRITE);
+	vga_put(dev->pdev, VGA_RSRC_LEGACY_IO);
+
+	if (IS_BROADWELL(dev) || (INTEL_INFO(dev)->gen >= 9))
+		gen8_irq_power_well_post_enable(dev_priv);
+}
+
+static void hsw_set_power_well(struct drm_i915_private *dev_priv,
+			       struct i915_power_well *power_well, bool enable)
+{
+	bool is_enabled, enable_requested;
+	uint32_t tmp;
+
+	tmp = I915_READ(HSW_PWR_WELL_DRIVER);
+	is_enabled = tmp & HSW_PWR_WELL_STATE_ENABLED;
+	enable_requested = tmp & HSW_PWR_WELL_ENABLE_REQUEST;
+
+	if (enable) {
+		if (!enable_requested)
+			I915_WRITE(HSW_PWR_WELL_DRIVER,
+				   HSW_PWR_WELL_ENABLE_REQUEST);
+
+		if (!is_enabled) {
+			DRM_DEBUG_KMS("Enabling power well\n");
+			if (wait_for((I915_READ(HSW_PWR_WELL_DRIVER) &
+				      HSW_PWR_WELL_STATE_ENABLED), 20))
+				DRM_ERROR("Timeout enabling power well\n");
+		}
+
+		hsw_power_well_post_enable(dev_priv);
+	} else {
+		if (enable_requested) {
+			I915_WRITE(HSW_PWR_WELL_DRIVER, 0);
+			POSTING_READ(HSW_PWR_WELL_DRIVER);
+			DRM_DEBUG_KMS("Requesting to disable the power well\n");
+		}
+	}
+}
+
+static void hsw_power_well_sync_hw(struct drm_i915_private *dev_priv,
+				   struct i915_power_well *power_well)
+{
+	hsw_set_power_well(dev_priv, power_well, power_well->count > 0);
+
+	/*
+	 * We're taking over the BIOS, so clear any requests made by it since
+	 * the driver is in charge now.
+	 */
+	if (I915_READ(HSW_PWR_WELL_BIOS) & HSW_PWR_WELL_ENABLE_REQUEST)
+		I915_WRITE(HSW_PWR_WELL_BIOS, 0);
+}
+
+static void hsw_power_well_enable(struct drm_i915_private *dev_priv,
+				  struct i915_power_well *power_well)
+{
+	hsw_set_power_well(dev_priv, power_well, true);
+}
+
+static void hsw_power_well_disable(struct drm_i915_private *dev_priv,
+				   struct i915_power_well *power_well)
+{
+	hsw_set_power_well(dev_priv, power_well, false);
+}
+
+static void i9xx_always_on_power_well_noop(struct drm_i915_private *dev_priv,
+					   struct i915_power_well *power_well)
+{
+}
+
+static bool i9xx_always_on_power_well_enabled(struct drm_i915_private *dev_priv,
+					     struct i915_power_well *power_well)
+{
+	return true;
+}
+
+static void vlv_set_power_well(struct drm_i915_private *dev_priv,
+			       struct i915_power_well *power_well, bool enable)
+{
+	enum punit_power_well power_well_id = power_well->data;
+	u32 mask;
+	u32 state;
+	u32 ctrl;
+
+	mask = PUNIT_PWRGT_MASK(power_well_id);
+	state = enable ? PUNIT_PWRGT_PWR_ON(power_well_id) :
+			 PUNIT_PWRGT_PWR_GATE(power_well_id);
+
+	mutex_lock(&dev_priv->rps.hw_lock);
+
+#define COND \
+	((vlv_punit_read(dev_priv, PUNIT_REG_PWRGT_STATUS) & mask) == state)
+
+	if (COND)
+		goto out;
+
+	ctrl = vlv_punit_read(dev_priv, PUNIT_REG_PWRGT_CTRL);
+	ctrl &= ~mask;
+	ctrl |= state;
+	vlv_punit_write(dev_priv, PUNIT_REG_PWRGT_CTRL, ctrl);
+
+	if (wait_for(COND, 100))
+		DRM_ERROR("timout setting power well state %08x (%08x)\n",
+			  state,
+			  vlv_punit_read(dev_priv, PUNIT_REG_PWRGT_CTRL));
+
+#undef COND
+
+out:
+	mutex_unlock(&dev_priv->rps.hw_lock);
+}
+
+static void vlv_power_well_sync_hw(struct drm_i915_private *dev_priv,
+				   struct i915_power_well *power_well)
+{
+	vlv_set_power_well(dev_priv, power_well, power_well->count > 0);
+}
+
+static void vlv_power_well_enable(struct drm_i915_private *dev_priv,
+				  struct i915_power_well *power_well)
+{
+	vlv_set_power_well(dev_priv, power_well, true);
+}
+
+static void vlv_power_well_disable(struct drm_i915_private *dev_priv,
+				   struct i915_power_well *power_well)
+{
+	vlv_set_power_well(dev_priv, power_well, false);
+}
+
+static bool vlv_power_well_enabled(struct drm_i915_private *dev_priv,
+				   struct i915_power_well *power_well)
+{
+	int power_well_id = power_well->data;
+	bool enabled = false;
+	u32 mask;
+	u32 state;
+	u32 ctrl;
+
+	mask = PUNIT_PWRGT_MASK(power_well_id);
+	ctrl = PUNIT_PWRGT_PWR_ON(power_well_id);
+
+	mutex_lock(&dev_priv->rps.hw_lock);
+
+	state = vlv_punit_read(dev_priv, PUNIT_REG_PWRGT_STATUS) & mask;
+	/*
+	 * We only ever set the power-on and power-gate states, anything
+	 * else is unexpected.
+	 */
+	WARN_ON(state != PUNIT_PWRGT_PWR_ON(power_well_id) &&
+		state != PUNIT_PWRGT_PWR_GATE(power_well_id));
+	if (state == ctrl)
+		enabled = true;
+
+	/*
+	 * A transient state at this point would mean some unexpected party
+	 * is poking at the power controls too.
+	 */
+	ctrl = vlv_punit_read(dev_priv, PUNIT_REG_PWRGT_CTRL) & mask;
+	WARN_ON(ctrl != state);
+
+	mutex_unlock(&dev_priv->rps.hw_lock);
+
+	return enabled;
+}
+
+static void vlv_display_power_well_enable(struct drm_i915_private *dev_priv,
+					  struct i915_power_well *power_well)
+{
+	WARN_ON_ONCE(power_well->data != PUNIT_POWER_WELL_DISP2D);
+
+	vlv_set_power_well(dev_priv, power_well, true);
+
+	spin_lock_irq(&dev_priv->irq_lock);
+	valleyview_enable_display_irqs(dev_priv);
+	spin_unlock_irq(&dev_priv->irq_lock);
+
+	/*
+	 * During driver initialization/resume we can avoid restoring the
+	 * part of the HW/SW state that will be inited anyway explicitly.
+	 */
+	if (dev_priv->power_domains.initializing)
+		return;
+
+	intel_hpd_init(dev_priv);
+
+	i915_redisable_vga_power_on(dev_priv->dev);
+}
+
+static void vlv_display_power_well_disable(struct drm_i915_private *dev_priv,
+					   struct i915_power_well *power_well)
+{
+	WARN_ON_ONCE(power_well->data != PUNIT_POWER_WELL_DISP2D);
+
+	spin_lock_irq(&dev_priv->irq_lock);
+	valleyview_disable_display_irqs(dev_priv);
+	spin_unlock_irq(&dev_priv->irq_lock);
+
+	vlv_set_power_well(dev_priv, power_well, false);
+
+	vlv_power_sequencer_reset(dev_priv);
+}
+
+static void vlv_dpio_cmn_power_well_enable(struct drm_i915_private *dev_priv,
+					   struct i915_power_well *power_well)
+{
+	WARN_ON_ONCE(power_well->data != PUNIT_POWER_WELL_DPIO_CMN_BC);
+
+	/*
+	 * Enable the CRI clock source so we can get at the
+	 * display and the reference clock for VGA
+	 * hotplug / manual detection.
+	 */
+	I915_WRITE(DPLL(PIPE_B), I915_READ(DPLL(PIPE_B)) |
+		   DPLL_REFA_CLK_ENABLE_VLV | DPLL_INTEGRATED_CRI_CLK_VLV);
+	udelay(1); /* >10ns for cmnreset, >0ns for sidereset */
+
+	vlv_set_power_well(dev_priv, power_well, true);
+
+	/*
+	 * From VLV2A0_DP_eDP_DPIO_driver_vbios_notes_10.docx -
+	 *  6.	De-assert cmn_reset/side_reset. Same as VLV X0.
+	 *   a.	GUnit 0x2110 bit[0] set to 1 (def 0)
+	 *   b.	The other bits such as sfr settings / modesel may all
+	 *	be set to 0.
+	 *
+	 * This should only be done on init and resume from S3 with
+	 * both PLLs disabled, or we risk losing DPIO and PLL
+	 * synchronization.
+	 */
+	I915_WRITE(DPIO_CTL, I915_READ(DPIO_CTL) | DPIO_CMNRST);
+}
+
+static void vlv_dpio_cmn_power_well_disable(struct drm_i915_private *dev_priv,
+					    struct i915_power_well *power_well)
+{
+	enum pipe pipe;
+
+	WARN_ON_ONCE(power_well->data != PUNIT_POWER_WELL_DPIO_CMN_BC);
+
+	for_each_pipe(dev_priv, pipe)
+		assert_pll_disabled(dev_priv, pipe);
+
+	/* Assert common reset */
+	I915_WRITE(DPIO_CTL, I915_READ(DPIO_CTL) & ~DPIO_CMNRST);
+
+	vlv_set_power_well(dev_priv, power_well, false);
+}
+
+static void chv_dpio_cmn_power_well_enable(struct drm_i915_private *dev_priv,
+					   struct i915_power_well *power_well)
+{
+	enum dpio_phy phy;
+
+	WARN_ON_ONCE(power_well->data != PUNIT_POWER_WELL_DPIO_CMN_BC &&
+		     power_well->data != PUNIT_POWER_WELL_DPIO_CMN_D);
+
+	/*
+	 * Enable the CRI clock source so we can get at the
+	 * display and the reference clock for VGA
+	 * hotplug / manual detection.
+	 */
+	if (power_well->data == PUNIT_POWER_WELL_DPIO_CMN_BC) {
+		phy = DPIO_PHY0;
+		I915_WRITE(DPLL(PIPE_B), I915_READ(DPLL(PIPE_B)) |
+			   DPLL_REFA_CLK_ENABLE_VLV);
+		I915_WRITE(DPLL(PIPE_B), I915_READ(DPLL(PIPE_B)) |
+			   DPLL_REFA_CLK_ENABLE_VLV | DPLL_INTEGRATED_CRI_CLK_VLV);
+	} else {
+		phy = DPIO_PHY1;
+		I915_WRITE(DPLL(PIPE_C), I915_READ(DPLL(PIPE_C)) |
+			   DPLL_REFA_CLK_ENABLE_VLV | DPLL_INTEGRATED_CRI_CLK_VLV);
+	}
+	udelay(1); /* >10ns for cmnreset, >0ns for sidereset */
+	vlv_set_power_well(dev_priv, power_well, true);
+
+	/* Poll for phypwrgood signal */
+	if (wait_for(I915_READ(DISPLAY_PHY_STATUS) & PHY_POWERGOOD(phy), 1))
+		DRM_ERROR("Display PHY %d is not power up\n", phy);
+
+	I915_WRITE(DISPLAY_PHY_CONTROL, I915_READ(DISPLAY_PHY_CONTROL) |
+		   PHY_COM_LANE_RESET_DEASSERT(phy));
+}
+
+static void chv_dpio_cmn_power_well_disable(struct drm_i915_private *dev_priv,
+					    struct i915_power_well *power_well)
+{
+	enum dpio_phy phy;
+
+	WARN_ON_ONCE(power_well->data != PUNIT_POWER_WELL_DPIO_CMN_BC &&
+		     power_well->data != PUNIT_POWER_WELL_DPIO_CMN_D);
+
+	if (power_well->data == PUNIT_POWER_WELL_DPIO_CMN_BC) {
+		phy = DPIO_PHY0;
+		assert_pll_disabled(dev_priv, PIPE_A);
+		assert_pll_disabled(dev_priv, PIPE_B);
+	} else {
+		phy = DPIO_PHY1;
+		assert_pll_disabled(dev_priv, PIPE_C);
+	}
+
+	I915_WRITE(DISPLAY_PHY_CONTROL, I915_READ(DISPLAY_PHY_CONTROL) &
+		   ~PHY_COM_LANE_RESET_DEASSERT(phy));
+
+	vlv_set_power_well(dev_priv, power_well, false);
+}
+
+static bool chv_pipe_power_well_enabled(struct drm_i915_private *dev_priv,
+					struct i915_power_well *power_well)
+{
+	enum pipe pipe = power_well->data;
+	bool enabled;
+	u32 state, ctrl;
+
+	mutex_lock(&dev_priv->rps.hw_lock);
+
+	state = vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ) & DP_SSS_MASK(pipe);
+	/*
+	 * We only ever set the power-on and power-gate states, anything
+	 * else is unexpected.
+	 */
+	WARN_ON(state != DP_SSS_PWR_ON(pipe) && state != DP_SSS_PWR_GATE(pipe));
+	enabled = state == DP_SSS_PWR_ON(pipe);
+
+	/*
+	 * A transient state at this point would mean some unexpected party
+	 * is poking at the power controls too.
+	 */
+	ctrl = vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ) & DP_SSC_MASK(pipe);
+	WARN_ON(ctrl << 16 != state);
+
+	mutex_unlock(&dev_priv->rps.hw_lock);
+
+	return enabled;
+}
+
+static void chv_set_pipe_power_well(struct drm_i915_private *dev_priv,
+				    struct i915_power_well *power_well,
+				    bool enable)
+{
+	enum pipe pipe = power_well->data;
+	u32 state;
+	u32 ctrl;
+
+	state = enable ? DP_SSS_PWR_ON(pipe) : DP_SSS_PWR_GATE(pipe);
+
+	mutex_lock(&dev_priv->rps.hw_lock);
+
+#define COND \
+	((vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ) & DP_SSS_MASK(pipe)) == state)
+
+	if (COND)
+		goto out;
+
+	ctrl = vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ);
+	ctrl &= ~DP_SSC_MASK(pipe);
+	ctrl |= enable ? DP_SSC_PWR_ON(pipe) : DP_SSC_PWR_GATE(pipe);
+	vlv_punit_write(dev_priv, PUNIT_REG_DSPFREQ, ctrl);
+
+	if (wait_for(COND, 100))
+		DRM_ERROR("timout setting power well state %08x (%08x)\n",
+			  state,
+			  vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ));
+
+#undef COND
+
+out:
+	mutex_unlock(&dev_priv->rps.hw_lock);
+}
+
+static void chv_pipe_power_well_sync_hw(struct drm_i915_private *dev_priv,
+					struct i915_power_well *power_well)
+{
+	chv_set_pipe_power_well(dev_priv, power_well, power_well->count > 0);
+}
+
+static void chv_pipe_power_well_enable(struct drm_i915_private *dev_priv,
+				       struct i915_power_well *power_well)
+{
+	WARN_ON_ONCE(power_well->data != PIPE_A &&
+		     power_well->data != PIPE_B &&
+		     power_well->data != PIPE_C);
+
+	chv_set_pipe_power_well(dev_priv, power_well, true);
+}
+
+static void chv_pipe_power_well_disable(struct drm_i915_private *dev_priv,
+					struct i915_power_well *power_well)
+{
+	WARN_ON_ONCE(power_well->data != PIPE_A &&
+		     power_well->data != PIPE_B &&
+		     power_well->data != PIPE_C);
+
+	chv_set_pipe_power_well(dev_priv, power_well, false);
+}
+
+static void check_power_well_state(struct drm_i915_private *dev_priv,
+				   struct i915_power_well *power_well)
+{
+	bool enabled = power_well->ops->is_enabled(dev_priv, power_well);
+
+	if (power_well->always_on || !i915.disable_power_well) {
+		if (!enabled)
+			goto mismatch;
+
+		return;
+	}
+
+	if (enabled != (power_well->count > 0))
+		goto mismatch;
+
+	return;
+
+mismatch:
+	WARN(1, "state mismatch for '%s' (always_on %d hw state %d use-count %d disable_power_well %d\n",
+		  power_well->name, power_well->always_on, enabled,
+		  power_well->count, i915.disable_power_well);
+}
+
+/**
+ * intel_display_power_get - grab a power domain reference
+ * @dev_priv: i915 device instance
+ * @domain: power domain to reference
+ *
+ * This function grabs a power domain reference for @domain and ensures that the
+ * power domain and all its parents are powered up. Therefore users should only
+ * grab a reference to the innermost power domain they need.
+ *
+ * Any power domain reference obtained by this function must have a symmetric
+ * call to intel_display_power_put() to release the reference again.
+ */
+void intel_display_power_get(struct drm_i915_private *dev_priv,
+			     enum intel_display_power_domain domain)
+{
+	struct i915_power_domains *power_domains;
+	struct i915_power_well *power_well;
+	int i;
+
+	intel_runtime_pm_get(dev_priv);
+
+	power_domains = &dev_priv->power_domains;
+
+	mutex_lock(&power_domains->lock);
+
+	for_each_power_well(i, power_well, BIT(domain), power_domains) {
+		if (!power_well->count++) {
+			DRM_DEBUG_KMS("enabling %s\n", power_well->name);
+			power_well->ops->enable(dev_priv, power_well);
+			power_well->hw_enabled = true;
+		}
+
+		check_power_well_state(dev_priv, power_well);
+	}
+
+	power_domains->domain_use_count[domain]++;
+
+	mutex_unlock(&power_domains->lock);
+}
+
+/**
+ * intel_display_power_put - release a power domain reference
+ * @dev_priv: i915 device instance
+ * @domain: power domain to reference
+ *
+ * This function drops the power domain reference obtained by
+ * intel_display_power_get() and might power down the corresponding hardware
+ * block right away if this is the last reference.
+ */
+void intel_display_power_put(struct drm_i915_private *dev_priv,
+			     enum intel_display_power_domain domain)
+{
+	struct i915_power_domains *power_domains;
+	struct i915_power_well *power_well;
+	int i;
+
+	power_domains = &dev_priv->power_domains;
+
+	mutex_lock(&power_domains->lock);
+
+	WARN_ON(!power_domains->domain_use_count[domain]);
+	power_domains->domain_use_count[domain]--;
+
+	for_each_power_well_rev(i, power_well, BIT(domain), power_domains) {
+		WARN_ON(!power_well->count);
+
+		if (!--power_well->count && i915.disable_power_well) {
+			DRM_DEBUG_KMS("disabling %s\n", power_well->name);
+			power_well->hw_enabled = false;
+			power_well->ops->disable(dev_priv, power_well);
+		}
+
+		check_power_well_state(dev_priv, power_well);
+	}
+
+	mutex_unlock(&power_domains->lock);
+
+	intel_runtime_pm_put(dev_priv);
+}
+
+#define POWER_DOMAIN_MASK (BIT(POWER_DOMAIN_NUM) - 1)
+
+#define HSW_ALWAYS_ON_POWER_DOMAINS (			\
+	BIT(POWER_DOMAIN_PIPE_A) |			\
+	BIT(POWER_DOMAIN_TRANSCODER_EDP) |		\
+	BIT(POWER_DOMAIN_PORT_DDI_A_2_LANES) |		\
+	BIT(POWER_DOMAIN_PORT_DDI_A_4_LANES) |		\
+	BIT(POWER_DOMAIN_PORT_DDI_B_2_LANES) |		\
+	BIT(POWER_DOMAIN_PORT_DDI_B_4_LANES) |		\
+	BIT(POWER_DOMAIN_PORT_DDI_C_2_LANES) |		\
+	BIT(POWER_DOMAIN_PORT_DDI_C_4_LANES) |		\
+	BIT(POWER_DOMAIN_PORT_DDI_D_2_LANES) |		\
+	BIT(POWER_DOMAIN_PORT_DDI_D_4_LANES) |		\
+	BIT(POWER_DOMAIN_PORT_CRT) |			\
+	BIT(POWER_DOMAIN_PLLS) |			\
+	BIT(POWER_DOMAIN_INIT))
+#define HSW_DISPLAY_POWER_DOMAINS (				\
+	(POWER_DOMAIN_MASK & ~HSW_ALWAYS_ON_POWER_DOMAINS) |	\
+	BIT(POWER_DOMAIN_INIT))
+
+#define BDW_ALWAYS_ON_POWER_DOMAINS (			\
+	HSW_ALWAYS_ON_POWER_DOMAINS |			\
+	BIT(POWER_DOMAIN_PIPE_A_PANEL_FITTER))
+#define BDW_DISPLAY_POWER_DOMAINS (				\
+	(POWER_DOMAIN_MASK & ~BDW_ALWAYS_ON_POWER_DOMAINS) |	\
+	BIT(POWER_DOMAIN_INIT))
+
+#define VLV_ALWAYS_ON_POWER_DOMAINS	BIT(POWER_DOMAIN_INIT)
+#define VLV_DISPLAY_POWER_DOMAINS	POWER_DOMAIN_MASK
+
+#define VLV_DPIO_CMN_BC_POWER_DOMAINS (		\
+	BIT(POWER_DOMAIN_PORT_DDI_B_2_LANES) |	\
+	BIT(POWER_DOMAIN_PORT_DDI_B_4_LANES) |	\
+	BIT(POWER_DOMAIN_PORT_DDI_C_2_LANES) |	\
+	BIT(POWER_DOMAIN_PORT_DDI_C_4_LANES) |	\
+	BIT(POWER_DOMAIN_PORT_CRT) |		\
+	BIT(POWER_DOMAIN_INIT))
+
+#define VLV_DPIO_TX_B_LANES_01_POWER_DOMAINS (	\
+	BIT(POWER_DOMAIN_PORT_DDI_B_2_LANES) |	\
+	BIT(POWER_DOMAIN_PORT_DDI_B_4_LANES) |	\
+	BIT(POWER_DOMAIN_INIT))
+
+#define VLV_DPIO_TX_B_LANES_23_POWER_DOMAINS (	\
+	BIT(POWER_DOMAIN_PORT_DDI_B_4_LANES) |	\
+	BIT(POWER_DOMAIN_INIT))
+
+#define VLV_DPIO_TX_C_LANES_01_POWER_DOMAINS (	\
+	BIT(POWER_DOMAIN_PORT_DDI_C_2_LANES) |	\
+	BIT(POWER_DOMAIN_PORT_DDI_C_4_LANES) |	\
+	BIT(POWER_DOMAIN_INIT))
+
+#define VLV_DPIO_TX_C_LANES_23_POWER_DOMAINS (	\
+	BIT(POWER_DOMAIN_PORT_DDI_C_4_LANES) |	\
+	BIT(POWER_DOMAIN_INIT))
+
+#define CHV_PIPE_A_POWER_DOMAINS (	\
+	BIT(POWER_DOMAIN_PIPE_A) |	\
+	BIT(POWER_DOMAIN_INIT))
+
+#define CHV_PIPE_B_POWER_DOMAINS (	\
+	BIT(POWER_DOMAIN_PIPE_B) |	\
+	BIT(POWER_DOMAIN_INIT))
+
+#define CHV_PIPE_C_POWER_DOMAINS (	\
+	BIT(POWER_DOMAIN_PIPE_C) |	\
+	BIT(POWER_DOMAIN_INIT))
+
+#define CHV_DPIO_CMN_BC_POWER_DOMAINS (		\
+	BIT(POWER_DOMAIN_PORT_DDI_B_2_LANES) |	\
+	BIT(POWER_DOMAIN_PORT_DDI_B_4_LANES) |	\
+	BIT(POWER_DOMAIN_PORT_DDI_C_2_LANES) |	\
+	BIT(POWER_DOMAIN_PORT_DDI_C_4_LANES) |	\
+	BIT(POWER_DOMAIN_INIT))
+
+#define CHV_DPIO_CMN_D_POWER_DOMAINS (		\
+	BIT(POWER_DOMAIN_PORT_DDI_D_2_LANES) |	\
+	BIT(POWER_DOMAIN_PORT_DDI_D_4_LANES) |	\
+	BIT(POWER_DOMAIN_INIT))
+
+#define CHV_DPIO_TX_D_LANES_01_POWER_DOMAINS (	\
+	BIT(POWER_DOMAIN_PORT_DDI_D_2_LANES) |	\
+	BIT(POWER_DOMAIN_PORT_DDI_D_4_LANES) |	\
+	BIT(POWER_DOMAIN_INIT))
+
+#define CHV_DPIO_TX_D_LANES_23_POWER_DOMAINS (	\
+	BIT(POWER_DOMAIN_PORT_DDI_D_4_LANES) |	\
+	BIT(POWER_DOMAIN_INIT))
+
+static const struct i915_power_well_ops i9xx_always_on_power_well_ops = {
+	.sync_hw = i9xx_always_on_power_well_noop,
+	.enable = i9xx_always_on_power_well_noop,
+	.disable = i9xx_always_on_power_well_noop,
+	.is_enabled = i9xx_always_on_power_well_enabled,
+};
+
+static const struct i915_power_well_ops chv_pipe_power_well_ops = {
+	.sync_hw = chv_pipe_power_well_sync_hw,
+	.enable = chv_pipe_power_well_enable,
+	.disable = chv_pipe_power_well_disable,
+	.is_enabled = chv_pipe_power_well_enabled,
+};
+
+static const struct i915_power_well_ops chv_dpio_cmn_power_well_ops = {
+	.sync_hw = vlv_power_well_sync_hw,
+	.enable = chv_dpio_cmn_power_well_enable,
+	.disable = chv_dpio_cmn_power_well_disable,
+	.is_enabled = vlv_power_well_enabled,
+};
+
+static struct i915_power_well i9xx_always_on_power_well[] = {
+	{
+		.name = "always-on",
+		.always_on = 1,
+		.domains = POWER_DOMAIN_MASK,
+		.ops = &i9xx_always_on_power_well_ops,
+	},
+};
+
+static const struct i915_power_well_ops hsw_power_well_ops = {
+	.sync_hw = hsw_power_well_sync_hw,
+	.enable = hsw_power_well_enable,
+	.disable = hsw_power_well_disable,
+	.is_enabled = hsw_power_well_enabled,
+};
+
+static struct i915_power_well hsw_power_wells[] = {
+	{
+		.name = "always-on",
+		.always_on = 1,
+		.domains = HSW_ALWAYS_ON_POWER_DOMAINS,
+		.ops = &i9xx_always_on_power_well_ops,
+	},
+	{
+		.name = "display",
+		.domains = HSW_DISPLAY_POWER_DOMAINS,
+		.ops = &hsw_power_well_ops,
+	},
+};
+
+static struct i915_power_well bdw_power_wells[] = {
+	{
+		.name = "always-on",
+		.always_on = 1,
+		.domains = BDW_ALWAYS_ON_POWER_DOMAINS,
+		.ops = &i9xx_always_on_power_well_ops,
+	},
+	{
+		.name = "display",
+		.domains = BDW_DISPLAY_POWER_DOMAINS,
+		.ops = &hsw_power_well_ops,
+	},
+};
+
+static const struct i915_power_well_ops vlv_display_power_well_ops = {
+	.sync_hw = vlv_power_well_sync_hw,
+	.enable = vlv_display_power_well_enable,
+	.disable = vlv_display_power_well_disable,
+	.is_enabled = vlv_power_well_enabled,
+};
+
+static const struct i915_power_well_ops vlv_dpio_cmn_power_well_ops = {
+	.sync_hw = vlv_power_well_sync_hw,
+	.enable = vlv_dpio_cmn_power_well_enable,
+	.disable = vlv_dpio_cmn_power_well_disable,
+	.is_enabled = vlv_power_well_enabled,
+};
+
+static const struct i915_power_well_ops vlv_dpio_power_well_ops = {
+	.sync_hw = vlv_power_well_sync_hw,
+	.enable = vlv_power_well_enable,
+	.disable = vlv_power_well_disable,
+	.is_enabled = vlv_power_well_enabled,
+};
+
+static struct i915_power_well vlv_power_wells[] = {
+	{
+		.name = "always-on",
+		.always_on = 1,
+		.domains = VLV_ALWAYS_ON_POWER_DOMAINS,
+		.ops = &i9xx_always_on_power_well_ops,
+	},
+	{
+		.name = "display",
+		.domains = VLV_DISPLAY_POWER_DOMAINS,
+		.data = PUNIT_POWER_WELL_DISP2D,
+		.ops = &vlv_display_power_well_ops,
+	},
+	{
+		.name = "dpio-tx-b-01",
+		.domains = VLV_DPIO_TX_B_LANES_01_POWER_DOMAINS |
+			   VLV_DPIO_TX_B_LANES_23_POWER_DOMAINS |
+			   VLV_DPIO_TX_C_LANES_01_POWER_DOMAINS |
+			   VLV_DPIO_TX_C_LANES_23_POWER_DOMAINS,
+		.ops = &vlv_dpio_power_well_ops,
+		.data = PUNIT_POWER_WELL_DPIO_TX_B_LANES_01,
+	},
+	{
+		.name = "dpio-tx-b-23",
+		.domains = VLV_DPIO_TX_B_LANES_01_POWER_DOMAINS |
+			   VLV_DPIO_TX_B_LANES_23_POWER_DOMAINS |
+			   VLV_DPIO_TX_C_LANES_01_POWER_DOMAINS |
+			   VLV_DPIO_TX_C_LANES_23_POWER_DOMAINS,
+		.ops = &vlv_dpio_power_well_ops,
+		.data = PUNIT_POWER_WELL_DPIO_TX_B_LANES_23,
+	},
+	{
+		.name = "dpio-tx-c-01",
+		.domains = VLV_DPIO_TX_B_LANES_01_POWER_DOMAINS |
+			   VLV_DPIO_TX_B_LANES_23_POWER_DOMAINS |
+			   VLV_DPIO_TX_C_LANES_01_POWER_DOMAINS |
+			   VLV_DPIO_TX_C_LANES_23_POWER_DOMAINS,
+		.ops = &vlv_dpio_power_well_ops,
+		.data = PUNIT_POWER_WELL_DPIO_TX_C_LANES_01,
+	},
+	{
+		.name = "dpio-tx-c-23",
+		.domains = VLV_DPIO_TX_B_LANES_01_POWER_DOMAINS |
+			   VLV_DPIO_TX_B_LANES_23_POWER_DOMAINS |
+			   VLV_DPIO_TX_C_LANES_01_POWER_DOMAINS |
+			   VLV_DPIO_TX_C_LANES_23_POWER_DOMAINS,
+		.ops = &vlv_dpio_power_well_ops,
+		.data = PUNIT_POWER_WELL_DPIO_TX_C_LANES_23,
+	},
+	{
+		.name = "dpio-common",
+		.domains = VLV_DPIO_CMN_BC_POWER_DOMAINS,
+		.data = PUNIT_POWER_WELL_DPIO_CMN_BC,
+		.ops = &vlv_dpio_cmn_power_well_ops,
+	},
+};
+
+static struct i915_power_well chv_power_wells[] = {
+	{
+		.name = "always-on",
+		.always_on = 1,
+		.domains = VLV_ALWAYS_ON_POWER_DOMAINS,
+		.ops = &i9xx_always_on_power_well_ops,
+	},
+#if 0
+	{
+		.name = "display",
+		.domains = VLV_DISPLAY_POWER_DOMAINS,
+		.data = PUNIT_POWER_WELL_DISP2D,
+		.ops = &vlv_display_power_well_ops,
+	},
+	{
+		.name = "pipe-a",
+		.domains = CHV_PIPE_A_POWER_DOMAINS,
+		.data = PIPE_A,
+		.ops = &chv_pipe_power_well_ops,
+	},
+	{
+		.name = "pipe-b",
+		.domains = CHV_PIPE_B_POWER_DOMAINS,
+		.data = PIPE_B,
+		.ops = &chv_pipe_power_well_ops,
+	},
+	{
+		.name = "pipe-c",
+		.domains = CHV_PIPE_C_POWER_DOMAINS,
+		.data = PIPE_C,
+		.ops = &chv_pipe_power_well_ops,
+	},
+#endif
+	{
+		.name = "dpio-common-bc",
+		/*
+		 * XXX: cmnreset for one PHY seems to disturb the other.
+		 * As a workaround keep both powered on at the same
+		 * time for now.
+		 */
+		.domains = CHV_DPIO_CMN_BC_POWER_DOMAINS | CHV_DPIO_CMN_D_POWER_DOMAINS,
+		.data = PUNIT_POWER_WELL_DPIO_CMN_BC,
+		.ops = &chv_dpio_cmn_power_well_ops,
+	},
+	{
+		.name = "dpio-common-d",
+		/*
+		 * XXX: cmnreset for one PHY seems to disturb the other.
+		 * As a workaround keep both powered on at the same
+		 * time for now.
+		 */
+		.domains = CHV_DPIO_CMN_BC_POWER_DOMAINS | CHV_DPIO_CMN_D_POWER_DOMAINS,
+		.data = PUNIT_POWER_WELL_DPIO_CMN_D,
+		.ops = &chv_dpio_cmn_power_well_ops,
+	},
+#if 0
+	{
+		.name = "dpio-tx-b-01",
+		.domains = VLV_DPIO_TX_B_LANES_01_POWER_DOMAINS |
+			   VLV_DPIO_TX_B_LANES_23_POWER_DOMAINS,
+		.ops = &vlv_dpio_power_well_ops,
+		.data = PUNIT_POWER_WELL_DPIO_TX_B_LANES_01,
+	},
+	{
+		.name = "dpio-tx-b-23",
+		.domains = VLV_DPIO_TX_B_LANES_01_POWER_DOMAINS |
+			   VLV_DPIO_TX_B_LANES_23_POWER_DOMAINS,
+		.ops = &vlv_dpio_power_well_ops,
+		.data = PUNIT_POWER_WELL_DPIO_TX_B_LANES_23,
+	},
+	{
+		.name = "dpio-tx-c-01",
+		.domains = VLV_DPIO_TX_C_LANES_01_POWER_DOMAINS |
+			   VLV_DPIO_TX_C_LANES_23_POWER_DOMAINS,
+		.ops = &vlv_dpio_power_well_ops,
+		.data = PUNIT_POWER_WELL_DPIO_TX_C_LANES_01,
+	},
+	{
+		.name = "dpio-tx-c-23",
+		.domains = VLV_DPIO_TX_C_LANES_01_POWER_DOMAINS |
+			   VLV_DPIO_TX_C_LANES_23_POWER_DOMAINS,
+		.ops = &vlv_dpio_power_well_ops,
+		.data = PUNIT_POWER_WELL_DPIO_TX_C_LANES_23,
+	},
+	{
+		.name = "dpio-tx-d-01",
+		.domains = CHV_DPIO_TX_D_LANES_01_POWER_DOMAINS |
+			   CHV_DPIO_TX_D_LANES_23_POWER_DOMAINS,
+		.ops = &vlv_dpio_power_well_ops,
+		.data = PUNIT_POWER_WELL_DPIO_TX_D_LANES_01,
+	},
+	{
+		.name = "dpio-tx-d-23",
+		.domains = CHV_DPIO_TX_D_LANES_01_POWER_DOMAINS |
+			   CHV_DPIO_TX_D_LANES_23_POWER_DOMAINS,
+		.ops = &vlv_dpio_power_well_ops,
+		.data = PUNIT_POWER_WELL_DPIO_TX_D_LANES_23,
+	},
+#endif
+};
+
+static struct i915_power_well *lookup_power_well(struct drm_i915_private *dev_priv,
+						 enum punit_power_well power_well_id)
+{
+	struct i915_power_domains *power_domains = &dev_priv->power_domains;
+	struct i915_power_well *power_well;
+	int i;
+
+	for_each_power_well(i, power_well, POWER_DOMAIN_MASK, power_domains) {
+		if (power_well->data == power_well_id)
+			return power_well;
+	}
+
+	return NULL;
+}
+
+#define set_power_wells(power_domains, __power_wells) ({		\
+	(power_domains)->power_wells = (__power_wells);			\
+	(power_domains)->power_well_count = ARRAY_SIZE(__power_wells);	\
+})
+
+/**
+ * intel_power_domains_init - initializes the power domain structures
+ * @dev_priv: i915 device instance
+ *
+ * Initializes the power domain structures for @dev_priv depending upon the
+ * supported platform.
+ */
+int intel_power_domains_init(struct drm_i915_private *dev_priv)
+{
+	struct i915_power_domains *power_domains = &dev_priv->power_domains;
+
+	mutex_init(&power_domains->lock);
+
+	/*
+	 * The enabling order will be from lower to higher indexed wells,
+	 * the disabling order is reversed.
+	 */
+	if (IS_HASWELL(dev_priv->dev)) {
+		set_power_wells(power_domains, hsw_power_wells);
+		hsw_pwr = power_domains;
+	} else if (IS_BROADWELL(dev_priv->dev)) {
+		set_power_wells(power_domains, bdw_power_wells);
+		hsw_pwr = power_domains;
+	} else if (IS_CHERRYVIEW(dev_priv->dev)) {
+		set_power_wells(power_domains, chv_power_wells);
+	} else if (IS_VALLEYVIEW(dev_priv->dev)) {
+		set_power_wells(power_domains, vlv_power_wells);
+	} else {
+		set_power_wells(power_domains, i9xx_always_on_power_well);
+	}
+
+	return 0;
+}
+
+static void intel_runtime_pm_disable(struct drm_i915_private *dev_priv)
+{
+	struct drm_device *dev = dev_priv->dev;
+	struct device *device = &dev->pdev->dev;
+
+	if (!HAS_RUNTIME_PM(dev))
+		return;
+
+	if (!intel_enable_rc6(dev))
+		return;
+
+	/* Make sure we're not suspended first. */
+	pm_runtime_get_sync(device);
+	pm_runtime_disable(device);
+}
+
+/**
+ * intel_power_domains_fini - finalizes the power domain structures
+ * @dev_priv: i915 device instance
+ *
+ * Finalizes the power domain structures for @dev_priv depending upon the
+ * supported platform. This function also disables runtime pm and ensures that
+ * the device stays powered up so that the driver can be reloaded.
+ */
+void intel_power_domains_fini(struct drm_i915_private *dev_priv)
+{
+	intel_runtime_pm_disable(dev_priv);
+
+	/* The i915.ko module is still not prepared to be loaded when
+	 * the power well is not enabled, so just enable it in case
+	 * we're going to unload/reload. */
+	intel_display_set_init_power(dev_priv, true);
+
+	hsw_pwr = NULL;
+}
+
+static void intel_power_domains_resume(struct drm_i915_private *dev_priv)
+{
+	struct i915_power_domains *power_domains = &dev_priv->power_domains;
+	struct i915_power_well *power_well;
+	int i;
+
+	mutex_lock(&power_domains->lock);
+	for_each_power_well(i, power_well, POWER_DOMAIN_MASK, power_domains) {
+		power_well->ops->sync_hw(dev_priv, power_well);
+		power_well->hw_enabled = power_well->ops->is_enabled(dev_priv,
+								     power_well);
+	}
+	mutex_unlock(&power_domains->lock);
+}
+
+static void vlv_cmnlane_wa(struct drm_i915_private *dev_priv)
+{
+	struct i915_power_well *cmn =
+		lookup_power_well(dev_priv, PUNIT_POWER_WELL_DPIO_CMN_BC);
+	struct i915_power_well *disp2d =
+		lookup_power_well(dev_priv, PUNIT_POWER_WELL_DISP2D);
+
+	/* nothing to do if common lane is already off */
+	if (!cmn->ops->is_enabled(dev_priv, cmn))
+		return;
+
+	/* If the display might be already active skip this */
+	if (disp2d->ops->is_enabled(dev_priv, disp2d) &&
+	    I915_READ(DPIO_CTL) & DPIO_CMNRST)
+		return;
+
+	DRM_DEBUG_KMS("toggling display PHY side reset\n");
+
+	/* cmnlane needs DPLL registers */
+	disp2d->ops->enable(dev_priv, disp2d);
+
+	/*
+	 * From VLV2A0_DP_eDP_HDMI_DPIO_driver_vbios_notes_11.docx:
+	 * Need to assert and de-assert PHY SB reset by gating the
+	 * common lane power, then un-gating it.
+	 * Simply ungating isn't enough to reset the PHY enough to get
+	 * ports and lanes running.
+	 */
+	cmn->ops->disable(dev_priv, cmn);
+}
+
+/**
+ * intel_power_domains_init_hw - initialize hardware power domain state
+ * @dev_priv: i915 device instance
+ *
+ * This function initializes the hardware power domain state and enables all
+ * power domains using intel_display_set_init_power().
+ */
+void intel_power_domains_init_hw(struct drm_i915_private *dev_priv)
+{
+	struct drm_device *dev = dev_priv->dev;
+	struct i915_power_domains *power_domains = &dev_priv->power_domains;
+
+	power_domains->initializing = true;
+
+	if (IS_VALLEYVIEW(dev) && !IS_CHERRYVIEW(dev)) {
+		mutex_lock(&power_domains->lock);
+		vlv_cmnlane_wa(dev_priv);
+		mutex_unlock(&power_domains->lock);
+	}
+
+	/* For now, we need the power well to be always enabled. */
+	intel_display_set_init_power(dev_priv, true);
+	intel_power_domains_resume(dev_priv);
+	power_domains->initializing = false;
+}
+
+/**
+ * intel_aux_display_runtime_get - grab an auxilliary power domain reference
+ * @dev_priv: i915 device instance
+ *
+ * This function grabs a power domain reference for the auxiliary power domain
+ * (for access to the GMBUS and DP AUX blocks) and ensures that it and all its
+ * parents are powered up. Therefore users should only grab a reference to the
+ * innermost power domain they need.
+ *
+ * Any power domain reference obtained by this function must have a symmetric
+ * call to intel_aux_display_runtime_put() to release the reference again.
+ */
+void intel_aux_display_runtime_get(struct drm_i915_private *dev_priv)
+{
+	intel_runtime_pm_get(dev_priv);
+}
+
+/**
+ * intel_aux_display_runtime_put - release an auxilliary power domain reference
+ * @dev_priv: i915 device instance
+ *
+ * This function drops the auxilliary power domain reference obtained by
+ * intel_aux_display_runtime_get() and might power down the corresponding
+ * hardware block right away if this is the last reference.
+ */
+void intel_aux_display_runtime_put(struct drm_i915_private *dev_priv)
+{
+	intel_runtime_pm_put(dev_priv);
+}
+
+/**
+ * intel_runtime_pm_get - grab a runtime pm reference
+ * @dev_priv: i915 device instance
+ *
+ * This function grabs a device-level runtime pm reference (mostly used for GEM
+ * code to ensure the GTT or GT is on) and ensures that it is powered up.
+ *
+ * Any runtime pm reference obtained by this function must have a symmetric
+ * call to intel_runtime_pm_put() to release the reference again.
+ */
+void intel_runtime_pm_get(struct drm_i915_private *dev_priv)
+{
+	struct drm_device *dev = dev_priv->dev;
+	struct device *device = &dev->pdev->dev;
+
+	if (!HAS_RUNTIME_PM(dev))
+		return;
+
+	pm_runtime_get_sync(device);
+	WARN(dev_priv->pm.suspended, "Device still suspended.\n");
+}
+
+/**
+ * intel_runtime_pm_get_noresume - grab a runtime pm reference
+ * @dev_priv: i915 device instance
+ *
+ * This function grabs a device-level runtime pm reference (mostly used for GEM
+ * code to ensure the GTT or GT is on).
+ *
+ * It will _not_ power up the device but instead only check that it's powered
+ * on.  Therefore it is only valid to call this functions from contexts where
+ * the device is known to be powered up and where trying to power it up would
+ * result in hilarity and deadlocks. That pretty much means only the system
+ * suspend/resume code where this is used to grab runtime pm references for
+ * delayed setup down in work items.
+ *
+ * Any runtime pm reference obtained by this function must have a symmetric
+ * call to intel_runtime_pm_put() to release the reference again.
+ */
+void intel_runtime_pm_get_noresume(struct drm_i915_private *dev_priv)
+{
+	struct drm_device *dev = dev_priv->dev;
+	struct device *device = &dev->pdev->dev;
+
+	if (!HAS_RUNTIME_PM(dev))
+		return;
+
+	WARN(dev_priv->pm.suspended, "Getting nosync-ref while suspended.\n");
+	pm_runtime_get_noresume(device);
+}
+
+/**
+ * intel_runtime_pm_put - release a runtime pm reference
+ * @dev_priv: i915 device instance
+ *
+ * This function drops the device-level runtime pm reference obtained by
+ * intel_runtime_pm_get() and might power down the corresponding
+ * hardware block right away if this is the last reference.
+ */
+void intel_runtime_pm_put(struct drm_i915_private *dev_priv)
+{
+	struct drm_device *dev = dev_priv->dev;
+	struct device *device = &dev->pdev->dev;
+
+	if (!HAS_RUNTIME_PM(dev))
+		return;
+
+	pm_runtime_mark_last_busy(device);
+	pm_runtime_put_autosuspend(device);
+}
+
+/**
+ * intel_runtime_pm_enable - enable runtime pm
+ * @dev_priv: i915 device instance
+ *
+ * This function enables runtime pm at the end of the driver load sequence.
+ *
+ * Note that this function does currently not enable runtime pm for the
+ * subordinate display power domains. That is only done on the first modeset
+ * using intel_display_set_init_power().
+ */
+void intel_runtime_pm_enable(struct drm_i915_private *dev_priv)
+{
+	struct drm_device *dev = dev_priv->dev;
+	struct device *device = &dev->pdev->dev;
+
+	if (!HAS_RUNTIME_PM(dev))
+		return;
+
+	pm_runtime_set_active(device);
+
+	/*
+	 * RPM depends on RC6 to save restore the GT HW context, so make RC6 a
+	 * requirement.
+	 */
+	if (!intel_enable_rc6(dev)) {
+		DRM_INFO("RC6 disabled, disabling runtime PM support\n");
+		return;
+	}
+
+	pm_runtime_set_autosuspend_delay(device, 10000); /* 10s */
+	pm_runtime_mark_last_busy(device);
+	pm_runtime_use_autosuspend(device);
+
+	pm_runtime_put_autosuspend(device);
+}
+
+/* Display audio driver power well request */
+int i915_request_power_well(void)
+{
+	struct drm_i915_private *dev_priv;
+
+	if (!hsw_pwr)
+		return -ENODEV;
+
+	dev_priv = container_of(hsw_pwr, struct drm_i915_private,
+				power_domains);
+	intel_display_power_get(dev_priv, POWER_DOMAIN_AUDIO);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(i915_request_power_well);
+
+/* Display audio driver power well release */
+int i915_release_power_well(void)
+{
+	struct drm_i915_private *dev_priv;
+
+	if (!hsw_pwr)
+		return -ENODEV;
+
+	dev_priv = container_of(hsw_pwr, struct drm_i915_private,
+				power_domains);
+	intel_display_power_put(dev_priv, POWER_DOMAIN_AUDIO);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(i915_release_power_well);
+
+/*
+ * Private interface for the audio driver to get CDCLK in kHz.
+ *
+ * Caller must request power well using i915_request_power_well() prior to
+ * making the call.
+ */
+int i915_get_cdclk_freq(void)
+{
+	struct drm_i915_private *dev_priv;
+
+	if (!hsw_pwr)
+		return -ENODEV;
+
+	dev_priv = container_of(hsw_pwr, struct drm_i915_private,
+				power_domains);
+
+	return intel_ddi_get_cdclk_freq(dev_priv);
+}
+EXPORT_SYMBOL_GPL(i915_get_cdclk_freq);

drivers/gpu/drm/i915/intel_sprite.c

@@ -138,6 +138,184 @@ static void intel_update_primary_plane(struct intel_crtc *crtc)
 		I915_WRITE(reg, I915_READ(reg) & ~DISPLAY_PLANE_ENABLE);
 }
 
+static void
+skl_update_plane(struct drm_plane *drm_plane, struct drm_crtc *crtc,
+		 struct drm_framebuffer *fb,
+		 struct drm_i915_gem_object *obj, int crtc_x, int crtc_y,
+		 unsigned int crtc_w, unsigned int crtc_h,
+		 uint32_t x, uint32_t y,
+		 uint32_t src_w, uint32_t src_h)
+{
+	struct drm_device *dev = drm_plane->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_plane *intel_plane = to_intel_plane(drm_plane);
+	const int pipe = intel_plane->pipe;
+	const int plane = intel_plane->plane + 1;
+	u32 plane_ctl, stride;
+	int pixel_size = drm_format_plane_cpp(fb->pixel_format, 0);
+
+	plane_ctl = I915_READ(PLANE_CTL(pipe, plane));
+
+	/* Mask out pixel format bits in case we change it */
+	plane_ctl &= ~PLANE_CTL_FORMAT_MASK;
+	plane_ctl &= ~PLANE_CTL_ORDER_RGBX;
+	plane_ctl &= ~PLANE_CTL_YUV422_ORDER_MASK;
+	plane_ctl &= ~PLANE_CTL_TILED_MASK;
+	plane_ctl &= ~PLANE_CTL_ALPHA_MASK;
+
+	/* Trickle feed has to be enabled */
+	plane_ctl &= ~PLANE_CTL_TRICKLE_FEED_DISABLE;
+
+	switch (fb->pixel_format) {
+	case DRM_FORMAT_RGB565:
+		plane_ctl |= PLANE_CTL_FORMAT_RGB_565;
+		break;
+	case DRM_FORMAT_XBGR8888:
+		plane_ctl |= PLANE_CTL_FORMAT_XRGB_8888 | PLANE_CTL_ORDER_RGBX;
+		break;
+	case DRM_FORMAT_XRGB8888:
+		plane_ctl |= PLANE_CTL_FORMAT_XRGB_8888;
+		break;
+	/*
+	 * XXX: For ARBG/ABGR formats we default to expecting scanout buffers
+	 * to be already pre-multiplied. We need to add a knob (or a different
+	 * DRM_FORMAT) for user-space to configure that.
+	 */
+	case DRM_FORMAT_ABGR8888:
+		plane_ctl |= PLANE_CTL_FORMAT_XRGB_8888 |
+			     PLANE_CTL_ORDER_RGBX |
+			     PLANE_CTL_ALPHA_SW_PREMULTIPLY;
+		break;
+	case DRM_FORMAT_ARGB8888:
+		plane_ctl |= PLANE_CTL_FORMAT_XRGB_8888 |
+			     PLANE_CTL_ALPHA_SW_PREMULTIPLY;
+		break;
+	case DRM_FORMAT_YUYV:
+		plane_ctl |= PLANE_CTL_FORMAT_YUV422 | PLANE_CTL_YUV422_YUYV;
+		break;
+	case DRM_FORMAT_YVYU:
+		plane_ctl |= PLANE_CTL_FORMAT_YUV422 | PLANE_CTL_YUV422_YVYU;
+		break;
+	case DRM_FORMAT_UYVY:
+		plane_ctl |= PLANE_CTL_FORMAT_YUV422 | PLANE_CTL_YUV422_UYVY;
+		break;
+	case DRM_FORMAT_VYUY:
+		plane_ctl |= PLANE_CTL_FORMAT_YUV422 | PLANE_CTL_YUV422_VYUY;
+		break;
+	default:
+		BUG();
+	}
+
+	switch (obj->tiling_mode) {
+	case I915_TILING_NONE:
+		stride = fb->pitches[0] >> 6;
+		break;
+	case I915_TILING_X:
+		plane_ctl |= PLANE_CTL_TILED_X;
+		stride = fb->pitches[0] >> 9;
+		break;
+	default:
+		BUG();
+	}
+
+	plane_ctl |= PLANE_CTL_ENABLE;
+	plane_ctl |= PLANE_CTL_PIPE_CSC_ENABLE;
+
+	intel_update_sprite_watermarks(drm_plane, crtc, src_w, src_h,
+				       pixel_size, true,
+				       src_w != crtc_w || src_h != crtc_h);
+
+	/* Sizes are 0 based */
+	src_w--;
+	src_h--;
+	crtc_w--;
+	crtc_h--;
+
+	I915_WRITE(PLANE_OFFSET(pipe, plane), (y << 16) | x);
+	I915_WRITE(PLANE_STRIDE(pipe, plane), stride);
+	I915_WRITE(PLANE_POS(pipe, plane), (crtc_y << 16) | crtc_x);
+	I915_WRITE(PLANE_SIZE(pipe, plane), (crtc_h << 16) | crtc_w);
+	I915_WRITE(PLANE_CTL(pipe, plane), plane_ctl);
+	I915_WRITE(PLANE_SURF(pipe, plane), i915_gem_obj_ggtt_offset(obj));
+	POSTING_READ(PLANE_SURF(pipe, plane));
+}
+
+static void
+skl_disable_plane(struct drm_plane *drm_plane, struct drm_crtc *crtc)
+{
+	struct drm_device *dev = drm_plane->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_plane *intel_plane = to_intel_plane(drm_plane);
+	const int pipe = intel_plane->pipe;
+	const int plane = intel_plane->plane + 1;
+
+	I915_WRITE(PLANE_CTL(pipe, plane),
+		   I915_READ(PLANE_CTL(pipe, plane)) & ~PLANE_CTL_ENABLE);
+
+	/* Activate double buffered register update */
+	I915_WRITE(PLANE_CTL(pipe, plane), 0);
+	POSTING_READ(PLANE_CTL(pipe, plane));
+
+	intel_update_sprite_watermarks(drm_plane, crtc, 0, 0, 0, false, false);
+}
+
+static int
+skl_update_colorkey(struct drm_plane *drm_plane,
+		    struct drm_intel_sprite_colorkey *key)
+{
+	struct drm_device *dev = drm_plane->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_plane *intel_plane = to_intel_plane(drm_plane);
+	const int pipe = intel_plane->pipe;
+	const int plane = intel_plane->plane;
+	u32 plane_ctl;
+
+	I915_WRITE(PLANE_KEYVAL(pipe, plane), key->min_value);
+	I915_WRITE(PLANE_KEYMAX(pipe, plane), key->max_value);
+	I915_WRITE(PLANE_KEYMSK(pipe, plane), key->channel_mask);
+
+	plane_ctl = I915_READ(PLANE_CTL(pipe, plane));
+	plane_ctl &= ~PLANE_CTL_KEY_ENABLE_MASK;
+	if (key->flags & I915_SET_COLORKEY_DESTINATION)
+		plane_ctl |= PLANE_CTL_KEY_ENABLE_DESTINATION;
+	else if (key->flags & I915_SET_COLORKEY_SOURCE)
+		plane_ctl |= PLANE_CTL_KEY_ENABLE_SOURCE;
+	I915_WRITE(PLANE_CTL(pipe, plane), plane_ctl);
+
+	POSTING_READ(PLANE_CTL(pipe, plane));
+
+	return 0;
+}
+
+static void
+skl_get_colorkey(struct drm_plane *drm_plane,
+		 struct drm_intel_sprite_colorkey *key)
+{
+	struct drm_device *dev = drm_plane->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_plane *intel_plane = to_intel_plane(drm_plane);
+	const int pipe = intel_plane->pipe;
+	const int plane = intel_plane->plane;
+	u32 plane_ctl;
+
+	key->min_value = I915_READ(PLANE_KEYVAL(pipe, plane));
+	key->max_value = I915_READ(PLANE_KEYMAX(pipe, plane));
+	key->channel_mask = I915_READ(PLANE_KEYMSK(pipe, plane));
+
+	plane_ctl = I915_READ(PLANE_CTL(pipe, plane));
+
+	switch (plane_ctl & PLANE_CTL_KEY_ENABLE_MASK) {
+	case PLANE_CTL_KEY_ENABLE_DESTINATION:
+		key->flags = I915_SET_COLORKEY_DESTINATION;
+		break;
+	case PLANE_CTL_KEY_ENABLE_SOURCE:
+		key->flags = I915_SET_COLORKEY_SOURCE;
+		break;
+	default:
+		key->flags = I915_SET_COLORKEY_NONE;
+	}
+}
+
 static void
 vlv_update_plane(struct drm_plane *dplane, struct drm_crtc *crtc,
 		 struct drm_framebuffer *fb,
@@ -845,57 +1023,24 @@ static bool colorkey_enabled(struct intel_plane *intel_plane)
 }
 
 static int
-intel_update_plane(struct drm_plane *plane, struct drm_crtc *crtc,
-		   struct drm_framebuffer *fb, int crtc_x, int crtc_y,
-		   unsigned int crtc_w, unsigned int crtc_h,
-		   uint32_t src_x, uint32_t src_y,
-		   uint32_t src_w, uint32_t src_h)
+intel_check_sprite_plane(struct drm_plane *plane,
+			 struct intel_plane_state *state)
 {
-	struct drm_device *dev = plane->dev;
-	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	struct intel_crtc *intel_crtc = to_intel_crtc(state->crtc);
 	struct intel_plane *intel_plane = to_intel_plane(plane);
-	enum pipe pipe = intel_crtc->pipe;
+	struct drm_framebuffer *fb = state->fb;
 	struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb);
 	struct drm_i915_gem_object *obj = intel_fb->obj;
-	struct drm_i915_gem_object *old_obj = intel_plane->obj;
-	int ret;
-	bool primary_enabled;
-	bool visible;
+	int crtc_x, crtc_y;
+	unsigned int crtc_w, crtc_h;
+	uint32_t src_x, src_y, src_w, src_h;
+	struct drm_rect *src = &state->src;
+	struct drm_rect *dst = &state->dst;
+	struct drm_rect *orig_src = &state->orig_src;
+	const struct drm_rect *clip = &state->clip;
 	int hscale, vscale;
 	int max_scale, min_scale;
 	int pixel_size = drm_format_plane_cpp(fb->pixel_format, 0);
-	struct drm_rect src = {
-		/* sample coordinates in 16.16 fixed point */
-		.x1 = src_x,
-		.x2 = src_x + src_w,
-		.y1 = src_y,
-		.y2 = src_y + src_h,
-	};
-	struct drm_rect dst = {
-		/* integer pixels */
-		.x1 = crtc_x,
-		.x2 = crtc_x + crtc_w,
-		.y1 = crtc_y,
-		.y2 = crtc_y + crtc_h,
-	};
-	const struct drm_rect clip = {
-		.x2 = intel_crtc->active ? intel_crtc->config.pipe_src_w : 0,
-		.y2 = intel_crtc->active ? intel_crtc->config.pipe_src_h : 0,
-	};
-	const struct {
-		int crtc_x, crtc_y;
-		unsigned int crtc_w, crtc_h;
-		uint32_t src_x, src_y, src_w, src_h;
-	} orig = {
-		.crtc_x = crtc_x,
-		.crtc_y = crtc_y,
-		.crtc_w = crtc_w,
-		.crtc_h = crtc_h,
-		.src_x = src_x,
-		.src_y = src_y,
-		.src_w = src_w,
-		.src_h = src_h,
-	};
 
 	/* Don't modify another pipe's plane */
 	if (intel_plane->pipe != intel_crtc->pipe) {
@@ -927,55 +1072,55 @@ intel_update_plane(struct drm_plane *plane, struct drm_crtc *crtc,
 	max_scale = intel_plane->max_downscale << 16;
 	min_scale = intel_plane->can_scale ? 1 : (1 << 16);
 
-	drm_rect_rotate(&src, fb->width << 16, fb->height << 16,
+	drm_rect_rotate(src, fb->width << 16, fb->height << 16,
 			intel_plane->rotation);
 
-	hscale = drm_rect_calc_hscale_relaxed(&src, &dst, min_scale, max_scale);
+	hscale = drm_rect_calc_hscale_relaxed(src, dst, min_scale, max_scale);
 	BUG_ON(hscale < 0);
 
-	vscale = drm_rect_calc_vscale_relaxed(&src, &dst, min_scale, max_scale);
+	vscale = drm_rect_calc_vscale_relaxed(src, dst, min_scale, max_scale);
 	BUG_ON(vscale < 0);
 
-	visible = drm_rect_clip_scaled(&src, &dst, &clip, hscale, vscale);
+	state->visible =  drm_rect_clip_scaled(src, dst, clip, hscale, vscale);
 
-	crtc_x = dst.x1;
-	crtc_y = dst.y1;
-	crtc_w = drm_rect_width(&dst);
-	crtc_h = drm_rect_height(&dst);
+	crtc_x = dst->x1;
+	crtc_y = dst->y1;
+	crtc_w = drm_rect_width(dst);
+	crtc_h = drm_rect_height(dst);
 
-	if (visible) {
+	if (state->visible) {
 		/* check again in case clipping clamped the results */
-		hscale = drm_rect_calc_hscale(&src, &dst, min_scale, max_scale);
+		hscale = drm_rect_calc_hscale(src, dst, min_scale, max_scale);
 		if (hscale < 0) {
 			DRM_DEBUG_KMS("Horizontal scaling factor out of limits\n");
-			drm_rect_debug_print(&src, true);
-			drm_rect_debug_print(&dst, false);
+			drm_rect_debug_print(src, true);
+			drm_rect_debug_print(dst, false);
 
 			return hscale;
 		}
 
-		vscale = drm_rect_calc_vscale(&src, &dst, min_scale, max_scale);
+		vscale = drm_rect_calc_vscale(src, dst, min_scale, max_scale);
 		if (vscale < 0) {
 			DRM_DEBUG_KMS("Vertical scaling factor out of limits\n");
-			drm_rect_debug_print(&src, true);
-			drm_rect_debug_print(&dst, false);
+			drm_rect_debug_print(src, true);
+			drm_rect_debug_print(dst, false);
 
 			return vscale;
 		}
 
 		/* Make the source viewport size an exact multiple of the scaling factors. */
-		drm_rect_adjust_size(&src,
-				     drm_rect_width(&dst) * hscale - drm_rect_width(&src),
-				     drm_rect_height(&dst) * vscale - drm_rect_height(&src));
+		drm_rect_adjust_size(src,
+				     drm_rect_width(dst) * hscale - drm_rect_width(src),
+				     drm_rect_height(dst) * vscale - drm_rect_height(src));
 
-		drm_rect_rotate_inv(&src, fb->width << 16, fb->height << 16,
+		drm_rect_rotate_inv(src, fb->width << 16, fb->height << 16,
 				    intel_plane->rotation);
 
 		/* sanity check to make sure the src viewport wasn't enlarged */
-		WARN_ON(src.x1 < (int) src_x ||
-			src.y1 < (int) src_y ||
-			src.x2 > (int) (src_x + src_w) ||
-			src.y2 > (int) (src_y + src_h));
+		WARN_ON(src->x1 < (int) orig_src->x1 ||
+			src->y1 < (int) orig_src->y1 ||
+			src->x2 > (int) orig_src->x2 ||
+			src->y2 > (int) orig_src->y2);
 
 		/*
 		 * Hardware doesn't handle subpixel coordinates.
@@ -983,10 +1128,10 @@ intel_update_plane(struct drm_plane *plane, struct drm_crtc *crtc,
 		 * increase the source viewport size, because that could
 		 * push the downscaling factor out of bounds.
 		 */
-		src_x = src.x1 >> 16;
-		src_w = drm_rect_width(&src) >> 16;
-		src_y = src.y1 >> 16;
-		src_h = drm_rect_height(&src) >> 16;
+		src_x = src->x1 >> 16;
+		src_w = drm_rect_width(src) >> 16;
+		src_y = src->y1 >> 16;
+		src_h = drm_rect_height(src) >> 16;
 
 		if (format_is_yuv(fb->pixel_format)) {
 			src_x &= ~1;
@@ -1000,12 +1145,12 @@ intel_update_plane(struct drm_plane *plane, struct drm_crtc *crtc,
 				crtc_w &= ~1;
 
 			if (crtc_w == 0)
-				visible = false;
+				state->visible = false;
 		}
 	}
 
 	/* Check size restrictions when scaling */
-	if (visible && (src_w != crtc_w || src_h != crtc_h)) {
+	if (state->visible && (src_w != crtc_w || src_h != crtc_h)) {
 		unsigned int width_bytes;
 
 		WARN_ON(!intel_plane->can_scale);
@@ -1013,12 +1158,13 @@ intel_update_plane(struct drm_plane *plane, struct drm_crtc *crtc,
 		/* FIXME interlacing min height is 6 */
 
 		if (crtc_w < 3 || crtc_h < 3)
-			visible = false;
+			state->visible = false;
 
 		if (src_w < 3 || src_h < 3)
-			visible = false;
+			state->visible = false;
 
-		width_bytes = ((src_x * pixel_size) & 63) + src_w * pixel_size;
+		width_bytes = ((src_x * pixel_size) & 63) +
+					src_w * pixel_size;
 
 		if (src_w > 2048 || src_h > 2048 ||
 		    width_bytes > 4096 || fb->pitches[0] > 4096) {
@@ -1027,42 +1173,76 @@ intel_update_plane(struct drm_plane *plane, struct drm_crtc *crtc,
 		}
 	}
 
-	dst.x1 = crtc_x;
-	dst.x2 = crtc_x + crtc_w;
-	dst.y1 = crtc_y;
-	dst.y2 = crtc_y + crtc_h;
+	if (state->visible) {
+		src->x1 = src_x;
+		src->x2 = src_x + src_w;
+		src->y1 = src_y;
+		src->y2 = src_y + src_h;
+	}
+
+	dst->x1 = crtc_x;
+	dst->x2 = crtc_x + crtc_w;
+	dst->y1 = crtc_y;
+	dst->y2 = crtc_y + crtc_h;
+
+	return 0;
+}
+
+static int
+intel_commit_sprite_plane(struct drm_plane *plane,
+			  struct intel_plane_state *state)
+{
+	struct drm_device *dev = plane->dev;
+	struct drm_crtc *crtc = state->crtc;
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	struct intel_plane *intel_plane = to_intel_plane(plane);
+	enum pipe pipe = intel_crtc->pipe;
+	struct drm_framebuffer *fb = state->fb;
+	struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb);
+	struct drm_i915_gem_object *obj = intel_fb->obj;
+	struct drm_i915_gem_object *old_obj = intel_plane->obj;
+	int crtc_x, crtc_y;
+	unsigned int crtc_w, crtc_h;
+	uint32_t src_x, src_y, src_w, src_h;
+	struct drm_rect *dst = &state->dst;
+	const struct drm_rect *clip = &state->clip;
+	bool primary_enabled;
+	int ret;
 
 	/*
 	 * If the sprite is completely covering the primary plane,
 	 * we can disable the primary and save power.
 	 */
-	primary_enabled = !drm_rect_equals(&dst, &clip) || colorkey_enabled(intel_plane);
-	WARN_ON(!primary_enabled && !visible && intel_crtc->active);
+	primary_enabled = !drm_rect_equals(dst, clip) || colorkey_enabled(intel_plane);
+	WARN_ON(!primary_enabled && !state->visible && intel_crtc->active);
 
-	mutex_lock(&dev->struct_mutex);
 
-	/* Note that this will apply the VT-d workaround for scanouts,
-	 * which is more restrictive than required for sprites. (The
-	 * primary plane requires 256KiB alignment with 64 PTE padding,
-	 * the sprite planes only require 128KiB alignment and 32 PTE padding.
-	 */
-	ret = intel_pin_and_fence_fb_obj(dev, obj, NULL);
-
-	i915_gem_track_fb(old_obj, obj,
-			  INTEL_FRONTBUFFER_SPRITE(pipe));
-	mutex_unlock(&dev->struct_mutex);
+	if (old_obj != obj) {
+		mutex_lock(&dev->struct_mutex);
 
-	if (ret)
-		return ret;
+		/* Note that this will apply the VT-d workaround for scanouts,
+		 * which is more restrictive than required for sprites. (The
+		 * primary plane requires 256KiB alignment with 64 PTE padding,
+		 * the sprite planes only require 128KiB alignment and 32 PTE
+		 * padding.
+		 */
+		ret = intel_pin_and_fence_fb_obj(dev, obj, NULL);
+		if (ret == 0)
+			i915_gem_track_fb(old_obj, obj,
+					  INTEL_FRONTBUFFER_SPRITE(pipe));
+		mutex_unlock(&dev->struct_mutex);
+		if (ret)
+			return ret;
+	}
 
-	intel_plane->crtc_x = orig.crtc_x;
-	intel_plane->crtc_y = orig.crtc_y;
-	intel_plane->crtc_w = orig.crtc_w;
-	intel_plane->crtc_h = orig.crtc_h;
-	intel_plane->src_x = orig.src_x;
-	intel_plane->src_y = orig.src_y;
-	intel_plane->src_w = orig.src_w;
-	intel_plane->src_h = orig.src_h;
+	intel_plane->crtc_x = state->orig_dst.x1;
+	intel_plane->crtc_y = state->orig_dst.y1;
+	intel_plane->crtc_w = drm_rect_width(&state->orig_dst);
+	intel_plane->crtc_h = drm_rect_height(&state->orig_dst);
+	intel_plane->src_x = state->orig_src.x1;
+	intel_plane->src_y = state->orig_src.y1;
+	intel_plane->src_w = drm_rect_width(&state->orig_src);
+	intel_plane->src_h = drm_rect_height(&state->orig_src);
 	intel_plane->obj = obj;
 
 	if (intel_crtc->active) {
@@ -1076,12 +1256,22 @@ intel_update_plane(struct drm_plane *plane, struct drm_crtc *crtc,
 		if (primary_was_enabled && !primary_enabled)
 			intel_pre_disable_primary(crtc);
 
-		if (visible)
+		if (state->visible) {
+			crtc_x = state->dst.x1;
+			crtc_y = state->dst.y1;
+			crtc_w = drm_rect_width(&state->dst);
+			crtc_h = drm_rect_height(&state->dst);
+			src_x = state->src.x1;
+			src_y = state->src.y1;
+			src_w = drm_rect_width(&state->src);
+			src_h = drm_rect_height(&state->src);
 			intel_plane->update_plane(plane, crtc, fb, obj,
 						  crtc_x, crtc_y, crtc_w, crtc_h,
 						  src_x, src_y, src_w, src_h);
-		else
+		} else {
 			intel_plane->disable_plane(plane, crtc);
+		}
+
 
 		intel_frontbuffer_flip(dev, INTEL_FRONTBUFFER_SPRITE(pipe));
 
@@ -1090,14 +1280,15 @@ intel_update_plane(struct drm_plane *plane, struct drm_crtc *crtc,
 	}
 
 	/* Unpin old obj after new one is active to avoid ugliness */
-	if (old_obj) {
+	if (old_obj && old_obj != obj) {
+
 		/*
 		 * It's fairly common to simply update the position of
 		 * an existing object.  In that case, we don't need to
 		 * wait for vblank to avoid ugliness, we only need to
 		 * do the pin & ref bookkeeping.
 		 */
-		if (old_obj != obj && intel_crtc->active)
+		if (intel_crtc->active)
 			intel_wait_for_vblank(dev, intel_crtc->pipe);
 
 		mutex_lock(&dev->struct_mutex);
@@ -1108,6 +1299,46 @@ intel_update_plane(struct drm_plane *plane, struct drm_crtc *crtc,
 	return 0;
 }
 
+static int
+intel_update_plane(struct drm_plane *plane, struct drm_crtc *crtc,
+		   struct drm_framebuffer *fb, int crtc_x, int crtc_y,
+		   unsigned int crtc_w, unsigned int crtc_h,
+		   uint32_t src_x, uint32_t src_y,
+		   uint32_t src_w, uint32_t src_h)
+{
+	struct intel_plane_state state;
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	int ret;
+
+	state.crtc = crtc;
+	state.fb = fb;
+
+	/* sample coordinates in 16.16 fixed point */
+	state.src.x1 = src_x;
+	state.src.x2 = src_x + src_w;
+	state.src.y1 = src_y;
+	state.src.y2 = src_y + src_h;
+
+	/* integer pixels */
+	state.dst.x1 = crtc_x;
+	state.dst.x2 = crtc_x + crtc_w;
+	state.dst.y1 = crtc_y;
+	state.dst.y2 = crtc_y + crtc_h;
+
+	state.clip.x1 = 0;
+	state.clip.y1 = 0;
+	state.clip.x2 = intel_crtc->active ? intel_crtc->config.pipe_src_w : 0;
+	state.clip.y2 = intel_crtc->active ? intel_crtc->config.pipe_src_h : 0;
+	state.orig_src = state.src;
+	state.orig_dst = state.dst;
+
+	ret = intel_check_sprite_plane(plane, &state);
+	if (ret)
+		return ret;
+
+	return intel_commit_sprite_plane(plane, &state);
+}
+
 static int
 intel_disable_plane(struct drm_plane *plane)
 {
@@ -1305,6 +1536,18 @@ static uint32_t vlv_plane_formats[] = {
 	DRM_FORMAT_VYUY,
 };
 
+static uint32_t skl_plane_formats[] = {
+	DRM_FORMAT_RGB565,
+	DRM_FORMAT_ABGR8888,
+	DRM_FORMAT_ARGB8888,
+	DRM_FORMAT_XBGR8888,
+	DRM_FORMAT_XRGB8888,
+	DRM_FORMAT_YUYV,
+	DRM_FORMAT_YVYU,
+	DRM_FORMAT_UYVY,
+	DRM_FORMAT_VYUY,
+};
+
 int
 intel_plane_init(struct drm_device *dev, enum pipe pipe, int plane)
 {
@@ -1368,7 +1611,21 @@ intel_plane_init(struct drm_device *dev, enum pipe pipe, int plane)
 			num_plane_formats = ARRAY_SIZE(snb_plane_formats);
 		}
 		break;
-
+	case 9:
+		/*
+		 * FIXME: Skylake planes can be scaled (with some restrictions),
+		 * but this is for another time.
+		 */
+		intel_plane->can_scale = false;
+		intel_plane->max_downscale = 1;
+		intel_plane->update_plane = skl_update_plane;
+		intel_plane->disable_plane = skl_disable_plane;
+		intel_plane->update_colorkey = skl_update_colorkey;
+		intel_plane->get_colorkey = skl_get_colorkey;
+
+		plane_formats = skl_plane_formats;
+		num_plane_formats = ARRAY_SIZE(skl_plane_formats);
+		break;
 	default:
 		kfree(intel_plane);
 		return -ENODEV;

drivers/gpu/drm/i915/intel_tv.c

@@ -1182,18 +1182,17 @@ intel_tv_detect_type(struct intel_tv *intel_tv,
 	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
 	struct drm_device *dev = encoder->dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
-	unsigned long irqflags;
 	u32 tv_ctl, save_tv_ctl;
 	u32 tv_dac, save_tv_dac;
 	int type;
 
 	/* Disable TV interrupts around load detect or we'll recurse */
 	if (connector->polled & DRM_CONNECTOR_POLL_HPD) {
-		spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
+		spin_lock_irq(&dev_priv->irq_lock);
 		i915_disable_pipestat(dev_priv, 0,
 				      PIPE_HOTPLUG_INTERRUPT_STATUS |
 				      PIPE_HOTPLUG_TV_INTERRUPT_STATUS);
-		spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
+		spin_unlock_irq(&dev_priv->irq_lock);
 	}
 
 	save_tv_dac = tv_dac = I915_READ(TV_DAC);
@@ -1266,11 +1265,11 @@ intel_tv_detect_type(struct intel_tv *intel_tv,
 
 	/* Restore interrupt config */
 	if (connector->polled & DRM_CONNECTOR_POLL_HPD) {
-		spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
+		spin_lock_irq(&dev_priv->irq_lock);
 		i915_enable_pipestat(dev_priv, 0,
 				     PIPE_HOTPLUG_INTERRUPT_STATUS |
 				     PIPE_HOTPLUG_TV_INTERRUPT_STATUS);
-		spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
+		spin_unlock_irq(&dev_priv->irq_lock);
 	}
 
 	return type;

drivers/gpu/drm/i915/intel_uncore.c

@@ -194,13 +194,15 @@ static void vlv_force_wake_reset(struct drm_i915_private *dev_priv)
 static void __vlv_force_wake_get(struct drm_i915_private *dev_priv,
 						int fw_engine)
 {
+	/*
+	 * WaRsDontPollForAckOnClearingFWBits:vlv
+	 * Hardware clears ack bits lazily (only when all ack
+	 * bits become 0) so don't poll for individiual ack
+	 * bits to be clear here like on other platforms.
+	 */
+
 	/* Check for Render Engine */
 	if (FORCEWAKE_RENDER & fw_engine) {
-		if (wait_for_atomic((__raw_i915_read32(dev_priv,
-						FORCEWAKE_ACK_VLV) &
-						FORCEWAKE_KERNEL) == 0,
-					FORCEWAKE_ACK_TIMEOUT_MS))
-			DRM_ERROR("Timed out: Render forcewake old ack to clear.\n");
 
 		__raw_i915_write32(dev_priv, FORCEWAKE_VLV,
 				   _MASKED_BIT_ENABLE(FORCEWAKE_KERNEL));
@@ -214,11 +216,6 @@ static void __vlv_force_wake_get(struct drm_i915_private *dev_priv,
 
 	/* Check for Media Engine */
 	if (FORCEWAKE_MEDIA & fw_engine) {
-		if (wait_for_atomic((__raw_i915_read32(dev_priv,
-						FORCEWAKE_ACK_MEDIA_VLV) &
-						FORCEWAKE_KERNEL) == 0,
-					FORCEWAKE_ACK_TIMEOUT_MS))
-			DRM_ERROR("Timed out: Media forcewake old ack to clear.\n");
 
 		__raw_i915_write32(dev_priv, FORCEWAKE_MEDIA_VLV,
 				   _MASKED_BIT_ENABLE(FORCEWAKE_KERNEL));
@@ -968,7 +965,7 @@ static const struct register_whitelist {
 	/* supported gens, 0x10 for 4, 0x30 for 4 and 5, etc. */
 	uint32_t gen_bitmask;
 } whitelist[] = {
-	{ RING_TIMESTAMP(RENDER_RING_BASE), 8, GEN_RANGE(4, 8) },
+	{ RING_TIMESTAMP(RENDER_RING_BASE), 8, GEN_RANGE(4, 9) },
 };
 
 int i915_reg_read_ioctl(struct drm_device *dev,

include/drm/drm_dp_helper.h

@@ -303,7 +303,8 @@
 #define DP_TEST_CRC_B_CB		    0x244
 
 #define DP_TEST_SINK_MISC		    0x246
-#define DP_TEST_CRC_SUPPORTED		    (1 << 5)
+# define DP_TEST_CRC_SUPPORTED		    (1 << 5)
+# define DP_TEST_COUNT_MASK		    0x7
 
 #define DP_TEST_RESPONSE		    0x260
 # define DP_TEST_ACK			    (1 << 0)
@@ -313,7 +314,7 @@
 #define DP_TEST_EDID_CHECKSUM		    0x261
 
 #define DP_TEST_SINK			    0x270
-#define DP_TEST_SINK_START	    (1 << 0)
+# define DP_TEST_SINK_START		    (1 << 0)
 
 #define DP_PAYLOAD_TABLE_UPDATE_STATUS      0x2c0   /* 1.2 MST */
 # define DP_PAYLOAD_TABLE_UPDATED           (1 << 0)

include/drm/i915_pciids.h

@@ -259,4 +259,21 @@
 	INTEL_VGA_DEVICE(0x22b2, info), \
 	INTEL_VGA_DEVICE(0x22b3, info)
 
+#define INTEL_SKL_IDS(info) \
+	INTEL_VGA_DEVICE(0x1916, info), /* ULT GT2 */ \
+	INTEL_VGA_DEVICE(0x1906, info), /* ULT GT1 */ \
+	INTEL_VGA_DEVICE(0x1926, info), /* ULT GT3 */ \
+	INTEL_VGA_DEVICE(0x1921, info), /* ULT GT2F */ \
+	INTEL_VGA_DEVICE(0x190E, info), /* ULX GT1 */ \
+	INTEL_VGA_DEVICE(0x191E, info), /* ULX GT2 */ \
+	INTEL_VGA_DEVICE(0x1912, info), /* DT  GT2 */ \
+	INTEL_VGA_DEVICE(0x1902, info), /* DT  GT1 */ \
+	INTEL_VGA_DEVICE(0x191B, info), /* Halo GT2 */ \
+	INTEL_VGA_DEVICE(0x192B, info), /* Halo GT3 */ \
+	INTEL_VGA_DEVICE(0x190B, info), /* Halo GT1 */ \
+	INTEL_VGA_DEVICE(0x191A, info), /* SRV GT2 */ \
+	INTEL_VGA_DEVICE(0x192A, info), /* SRV GT3 */ \
+	INTEL_VGA_DEVICE(0x190A, info), /* SRV GT1 */ \
+	INTEL_VGA_DEVICE(0x191D, info)  /* WKS GT2 */
+
 #endif /* _I915_PCIIDS_H */