drm/dsi: Order DCS helpers by command code

Most of these helpers had been introduced in the correct order, but some
were simply appended, which wasn't detected when they were applied.

Signed-off-by: Thierry Reding <treding@nvidia.com>

drivers/gpu/drm/drm_mipi_dsi.c

@@ -999,47 +999,47 @@ int mipi_dsi_dcs_set_tear_on(struct mipi_dsi_device *dsi,
 EXPORT_SYMBOL(mipi_dsi_dcs_set_tear_on);
 
 /**
- * mipi_dsi_dcs_set_tear_scanline() - set the scanline to use as trigger for
- *    the Tearing Effect output signal of the display module
+ * mipi_dsi_dcs_set_pixel_format() - sets the pixel format for the RGB image
+ *    data used by the interface
  * @dsi: DSI peripheral device
- * @scanline: scanline to use as trigger
+ * @format: pixel format
  *
- * Return: 0 on success or a negative error code on failure
+ * Return: 0 on success or a negative error code on failure.
  */
-int mipi_dsi_dcs_set_tear_scanline(struct mipi_dsi_device *dsi, u16 scanline)
+int mipi_dsi_dcs_set_pixel_format(struct mipi_dsi_device *dsi, u8 format)
 {
-	u8 payload[3] = { MIPI_DCS_SET_TEAR_SCANLINE, scanline >> 8,
-			  scanline & 0xff };
 	ssize_t err;
 
-	err = mipi_dsi_generic_write(dsi, payload, sizeof(payload));
+	err = mipi_dsi_dcs_write(dsi, MIPI_DCS_SET_PIXEL_FORMAT, &format,
+				 sizeof(format));
 	if (err < 0)
 		return err;
 
 	return 0;
 }
-EXPORT_SYMBOL(mipi_dsi_dcs_set_tear_scanline);
+EXPORT_SYMBOL(mipi_dsi_dcs_set_pixel_format);
 
 /**
- * mipi_dsi_dcs_set_pixel_format() - sets the pixel format for the RGB image
- *    data used by the interface
+ * mipi_dsi_dcs_set_tear_scanline() - set the scanline to use as trigger for
+ *    the Tearing Effect output signal of the display module
  * @dsi: DSI peripheral device
- * @format: pixel format
+ * @scanline: scanline to use as trigger
  *
- * Return: 0 on success or a negative error code on failure.
+ * Return: 0 on success or a negative error code on failure
  */
-int mipi_dsi_dcs_set_pixel_format(struct mipi_dsi_device *dsi, u8 format)
+int mipi_dsi_dcs_set_tear_scanline(struct mipi_dsi_device *dsi, u16 scanline)
 {
+	u8 payload[3] = { MIPI_DCS_SET_TEAR_SCANLINE, scanline >> 8,
+			  scanline & 0xff };
 	ssize_t err;
 
-	err = mipi_dsi_dcs_write(dsi, MIPI_DCS_SET_PIXEL_FORMAT, &format,
-				 sizeof(format));
+	err = mipi_dsi_generic_write(dsi, payload, sizeof(payload));
 	if (err < 0)
 		return err;
 
 	return 0;
 }
-EXPORT_SYMBOL(mipi_dsi_dcs_set_pixel_format);
+EXPORT_SYMBOL(mipi_dsi_dcs_set_tear_scanline);
 
 static int mipi_dsi_drv_probe(struct device *dev)
 {

include/drm/drm_mipi_dsi.h

@@ -265,11 +265,11 @@ int mipi_dsi_dcs_set_column_address(struct mipi_dsi_device *dsi, u16 start,
 				    u16 end);
 int mipi_dsi_dcs_set_page_address(struct mipi_dsi_device *dsi, u16 start,
 				  u16 end);
-int mipi_dsi_dcs_set_tear_scanline(struct mipi_dsi_device *dsi, u16 scanline);
 int mipi_dsi_dcs_set_tear_off(struct mipi_dsi_device *dsi);
 int mipi_dsi_dcs_set_tear_on(struct mipi_dsi_device *dsi,
 			     enum mipi_dsi_dcs_tear_mode mode);
 int mipi_dsi_dcs_set_pixel_format(struct mipi_dsi_device *dsi, u8 format);
+int mipi_dsi_dcs_set_tear_scanline(struct mipi_dsi_device *dsi, u16 scanline);
 
 /**
  * struct mipi_dsi_driver - DSI driver